return ""
}
}
+
+# Copied and modified from gas.
+
+# run_dump_test FILE (optional:) EXTRA_OPTIONS
+#
+# Assemble a .s file, then run some utility on it and check the output.
+#
+# There should be an assembly language file named FILE.s in the test
+# suite directory, and a pattern file called FILE.d. `run_dump_test'
+# will assemble FILE.s, run some tool like `objdump', `objcopy', or
+# `nm' on the .o file to produce textual output, and then analyze that
+# with regexps. The FILE.d file specifies what program to run, and
+# what to expect in its output.
+#
+# The FILE.d file begins with zero or more option lines, which specify
+# flags to pass to the assembler, the program to run to dump the
+# assembler's output, and the options it wants. The option lines have
+# the syntax:
+#
+# # OPTION: VALUE
+#
+# OPTION is the name of some option, like "name" or "objdump", and
+# VALUE is OPTION's value. The valid options are described below.
+# Whitespace is ignored everywhere, except within VALUE. The option
+# list ends with the first line that doesn't match the above syntax.
+# However, a line within the options that begins with a #, but doesn't
+# have a recognizable option name followed by a colon, is considered a
+# comment and entirely ignored.
+#
+# The optional EXTRA_OPTIONS argument to `run_dump_test' is a list of
+# two-element lists. The first element of each is an option name, and
+# the second additional arguments to be added on to the end of the
+# option list as given in FILE.d. (If omitted, no additional options
+# are added.)
+#
+# The interesting options are:
+#
+# name: TEST-NAME
+# The name of this test, passed to DejaGNU's `pass' and `fail'
+# commands. If omitted, this defaults to FILE, the root of the
+# .s and .d files' names.
+#
+# as: FLAGS
+# When assembling FILE.s, pass FLAGS to the assembler.
+#
+# PROG: PROGRAM-NAME
+# The name of the program to run to analyze the .o file produced
+# by the assembler. This can be omitted; run_dump_test will guess
+# which program to run by seeing which of the flags options below
+# is present.
+#
+# objdump: FLAGS
+# nm: FLAGS
+# objcopy: FLAGS
+# Use the specified program to analyze the .o file, and pass it
+# FLAGS, in addition to the .o file name. Note that they are run
+# with LC_ALL=C in the environment to give consistent sorting
+# of symbols.
+#
+# source: SOURCE
+# Assemble the file SOURCE.s. If omitted, this defaults to FILE.s.
+# This is useful if several .d files want to share a .s file.
+#
+# target: GLOBS...
+# Run this test only on a specified list of targets. More precisely,
+# each glob in the space-separated list is passed to "istarget"; if
+# it evaluates true for any of them, the test will be run, otherwise
+# it will be marked unsupported.
+#
+# not-target: GLOBS...
+# Do not run this test on a specified list of targets. Again,
+# the each glob in the space-separated list is passed to
+# "istarget", and the test is run if it evaluates *false* for
+# *all* of them. Otherwise it will be marked unsupported.
+#
+# skip: GLOBS...
+# not-skip: GLOBS...
+# These are exactly the same as "not-target" and "target",
+# respectively, except that they do nothing at all if the check
+# fails. They should only be used in groups, to construct a single
+# test which is run on all targets but with variant options or
+# expected output on some targets. (For example, see
+# gas/arm/inst.d and gas/arm/wince_inst.d.)
+#
+# error: REGEX
+# An error with message matching REGEX must be emitted for the test
+# to pass. The PROG, objdump, nm and objcopy options have no
+# meaning and need not supplied if this is present.
+#
+# warning: REGEX
+# Expect a gas warning matching REGEX. It is an error to issue
+# both "error" and "warning".
+#
+# stderr: FILE
+# FILE contains regexp lines to be matched against the diagnostic
+# output of the assembler. This does not preclude the use of
+# PROG, nm, objdump, or objcopy.
+#
+# error-output: FILE
+# Means the same as 'stderr', but also indicates that the assembler
+# is expected to exit unsuccessfully (therefore PROG, objdump, nm,
+# and objcopy have no meaning and should not be supplied).
+#
+# Each option may occur at most once.
+#
+# After the option lines come regexp lines. `run_dump_test' calls
+# `regexp_diff' to compare the output of the dumping tool against the
+# regexps in FILE.d. `regexp_diff' is defined later in this file; see
+# further comments there.
+
+proc run_dump_test { name {extra_options {}} } {
+ global subdir srcdir
+ global OBJDUMP NM OBJCOPY READELF
+ global OBJDUMPFLAGS NMFLAGS OBJCOPYFLAGS READELFFLAGS
+ global host_triplet
+ global env
+ global copyfile
+ global tempfile
+
+ if [string match "*/*" $name] {
+ set file $name
+ set name [file tail $name]
+ } else {
+ set file "$srcdir/$subdir/$name"
+ }
+ set opt_array [slurp_options "${file}.d"]
+ if { $opt_array == -1 } {
+ perror "error reading options from $file.d"
+ unresolved $subdir/$name
+ return
+ }
+ set opts(addr2line) {}
+ set opts(ar) {}
+ set opts(nm) {}
+ set opts(objcopy) {}
+ set opts(objdump) {}
+ set opts(strip) {}
+ set opts(ranlib) {}
+ set opts(readelf) {}
+ set opts(size) {}
+ set opts(strings) {}
+ set opts(name) {}
+ set opts(PROG) {}
+ set opts(DUMPPROG) {}
+ set opts(source) {}
+ set opts(target) {}
+ set opts(not-target) {}
+ set opts(skip) {}
+ set opts(not-skip) {}
+
+ foreach i $opt_array {
+ set opt_name [lindex $i 0]
+ set opt_val [lindex $i 1]
+ if ![info exists opts($opt_name)] {
+ perror "unknown option $opt_name in file $file.d"
+ unresolved $subdir/$name
+ return
+ }
+ if [string length $opts($opt_name)] {
+ perror "option $opt_name multiply set in $file.d"
+ unresolved $subdir/$name
+ return
+ }
+ set opts($opt_name) $opt_val
+ }
+
+ foreach i $extra_options {
+ set opt_name [lindex $i 0]
+ set opt_val [lindex $i 1]
+ if ![info exists opts($opt_name)] {
+ perror "unknown option $opt_name given in extra_opts"
+ unresolved $subdir/$name
+ return
+ }
+ # add extra option to end of existing option, adding space
+ # if necessary.
+ if [string length $opts($opt_name)] {
+ append opts($opt_name) " "
+ }
+ append opts($opt_name) $opt_val
+ }
+
+ if { $opts(name) == "" } {
+ set testname "$subdir/$name"
+ } else {
+ set testname $opts(name)
+ }
+ verbose "Testing $testname"
+
+ if {$opts(PROG) == ""} {
+ perror "program isn't set in $file.d"
+ unresolved $testname
+ return
+ }
+
+ switch -- $opts(PROG) {
+ ar { set program ar }
+ objcopy { set program objcopy }
+ ranlib { set program ranlib }
+ strip { set program strip }
+ strings { set program strings }
+ default {
+ perror "unrecognized program option $opts(PROG) in $file.d"
+ unresolved $testname
+ return }
+ }
+
+ set dumpprogram ""
+ if { $opts(DUMPPROG) != "" } {
+ switch -- $opts(DUMPPROG) {
+ addr2line { set dumpprogram addr2line }
+ nm { set dumpprogram nm }
+ objdump { set dumpprogram objdump }
+ readelf { set dumpprogram readelf }
+ size { set dumpprogram size }
+ default {
+ perror "unrecognized dump program option $opts(DUMPPROG) in $file.d"
+ unresolved $testname
+ return }
+ }
+ } else {
+ # Guess which program to run, by seeing which option was specified.
+ foreach p {objdump nm readelf} {
+ if {$opts($p) != ""} {
+ if {$dumpprogram != ""} {
+ perror "ambiguous dump program in $file.d"
+ unresolved $testname
+ return
+ } else {
+ set dumpprogram $p
+ }
+ }
+ }
+ }
+
+ # Handle skipping the test on specified targets.
+ # You can have both skip/not-skip and target/not-target, but you can't
+ # have both skip and not-skip, or target and not-target, in the same file.
+ if { $opts(skip) != "" } then {
+ if { $opts(not-skip) != "" } then {
+ perror "$testname: mixing skip and not-skip directives is invalid"
+ unresolved $testname
+ return
+ }
+ foreach glob $opts(skip) {
+ if {[istarget $glob]} { return }
+ }
+ }
+ if { $opts(not-skip) != "" } then {
+ set skip 1
+ foreach glob $opts(not-skip) {
+ if {[istarget $glob]} {
+ set skip 0
+ break
+ }
+ }
+ if {$skip} { return }
+ }
+ if { $opts(target) != "" } then {
+ if { $opts(not-target) != "" } then {
+ perror "$testname: mixing target and not-target directives is invalid"
+ unresolved $testname
+ return
+ }
+ set skip 1
+ foreach glob $opts(target) {
+ if {[istarget $glob]} {
+ set skip 0
+ break
+ }
+ }
+ if {$skip} {
+ unsupported $testname
+ return
+ }
+ }
+ if { $opts(not-target) != "" } then {
+ foreach glob $opts(not-target) {
+ if {[istarget $glob]} {
+ unsupported $testname
+ return
+ }
+ }
+ }
+
+ if { $opts(source) == "" } {
+ set srcfile ${file}.s
+ } else {
+ set srcfile $srcdir/$subdir/$opts(source)
+ }
+
+ set exec_output [binutils_assemble ${srcfile} tmpdir/bintest.o]
+ if [string match "" $exec_output] then {
+ send_log "$exec_output\n"
+ verbose "$exec_output"
+ fail $testname
+ return
+ }
+
+ set progopts1 $opts($program)
+ eval set progopts \$[string toupper $program]FLAGS
+ eval set binary \$[string toupper $program]
+
+ set exec_output [binutils_run $binary "$progopts $progopts1 $tempfile ${copyfile}.o"]
+ if ![string match "" $exec_output] {
+ send_log "$exec_output\n"
+ verbose "$exec_output"
+ fail $testname
+ return
+ }
+
+ set progopts1 $opts($dumpprogram)
+ eval set progopts \$[string toupper $dumpprogram]FLAGS
+ eval set binary \$[string toupper $dumpprogram]
+
+ if { [which $binary] == 0 } {
+ untested $testname
+ return
+ }
+
+ verbose "running $binary $progopts $progopts1" 3
+
+ set cmd "$binary $progopts $progopts1 ${copyfile}.o > tmpdir/dump.out"
+
+ # Ensure consistent sorting of symbols
+ if {[info exists env(LC_ALL)]} {
+ set old_lc_all $env(LC_ALL)
+ }
+ set env(LC_ALL) "C"
+ send_log "$cmd\n"
+ catch "exec $cmd" comp_output
+ if {[info exists old_lc_all]} {
+ set env(LC_ALL) $old_lc_all
+ } else {
+ unset env(LC_ALL)
+ }
+ set comp_output [prune_warnings $comp_output]
+ if ![string match "" $comp_output] then {
+ send_log "$comp_output\n"
+ fail $testname
+ return
+ }
+
+ verbose_eval {[file_contents "tmpdir/dump.out"]} 3
+ if { [regexp_diff "tmpdir/dump.out" "${file}.d"] } then {
+ fail $testname
+ verbose "output is [file_contents "tmpdir/dump.out"]" 2
+ return
+ }
+
+ pass $testname
+}
+
+proc slurp_options { file } {
+ if [catch { set f [open $file r] } x] {
+ #perror "couldn't open `$file': $x"
+ perror "$x"
+ return -1
+ }
+ set opt_array {}
+ # whitespace expression
+ set ws {[ ]*}
+ set nws {[^ ]*}
+ # whitespace is ignored anywhere except within the options list;
+ # option names are alphabetic plus dash
+ set pat "^#${ws}(\[a-zA-Z-\]*)$ws:${ws}(.*)$ws\$"
+ while { [gets $f line] != -1 } {
+ set line [string trim $line]
+ # Whitespace here is space-tab.
+ if [regexp $pat $line xxx opt_name opt_val] {
+ # match!
+ lappend opt_array [list $opt_name $opt_val]
+ } elseif {![regexp "^#" $line ]} {
+ break
+ }
+ }
+ close $f
+ return $opt_array
+}
+
+# regexp_diff, based on simple_diff taken from ld test suite
+# compares two files line-by-line
+# file1 contains strings, file2 contains regexps and #-comments
+# blank lines are ignored in either file
+# returns non-zero if differences exist
+#
+proc regexp_diff { file_1 file_2 } {
+
+ set eof -1
+ set end_1 0
+ set end_2 0
+ set differences 0
+ set diff_pass 0
+
+ if [file exists $file_1] then {
+ set file_a [open $file_1 r]
+ } else {
+ perror "$file_1 doesn't exist"
+ return 1
+ }
+
+ if [file exists $file_2] then {
+ set file_b [open $file_2 r]
+ } else {
+ perror "$file_2 doesn't exist"
+ close $file_a
+ return 1
+ }
+
+ verbose " Regexp-diff'ing: $file_1 $file_2" 2
+
+ while { 1 } {
+ set line_a ""
+ set line_b ""
+ while { [string length $line_a] == 0 } {
+ if { [gets $file_a line_a] == $eof } {
+ set end_1 1
+ break
+ }
+ }
+ while { [string length $line_b] == 0 || [string match "#*" $line_b] } {
+ if [ string match "#pass" $line_b ] {
+ set end_2 1
+ set diff_pass 1
+ break
+ } elseif [ string match "#..." $line_b ] {
+ if { [gets $file_b line_b] == $eof } {
+ set end_2 1
+ set diff_pass 1
+ break
+ }
+ verbose "looking for \"^$line_b$\"" 3
+ while { ![regexp "^$line_b$" "$line_a"] } {
+ verbose "skipping \"$line_a\"" 3
+ if { [gets $file_a line_a] == $eof } {
+ set end_1 1
+ break
+ }
+ }
+ break
+ }
+ if { [gets $file_b line_b] == $eof } {
+ set end_2 1
+ break
+ }
+ }
+
+ if { $diff_pass } {
+ break
+ } elseif { $end_1 && $end_2 } {
+ break
+ } elseif { $end_1 } {
+ send_log "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1\n"
+ verbose "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1" 3
+ set differences 1
+ break
+ } elseif { $end_2 } {
+ send_log "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n"
+ verbose "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n" 3
+ set differences 1
+ break
+ } else {
+ verbose "regexp \"^$line_b$\"\nline \"$line_a\"" 3
+ if ![regexp "^$line_b$" "$line_a"] {
+ send_log "regexp_diff match failure\n"
+ send_log "regexp \"^$line_b$\"\nline \"$line_a\"\n"
+ verbose "regexp_diff match failure\n" 3
+ set differences 1
+ }
+ }
+ }
+
+ if { $differences == 0 && !$diff_pass && [eof $file_a] != [eof $file_b] } {
+ send_log "$file_1 and $file_2 are different lengths\n"
+ verbose "$file_1 and $file_2 are different lengths" 3
+ set differences 1
+ }
+
+ close $file_a
+ close $file_b
+
+ return $differences
+}
+
+proc file_contents { filename } {
+ set file [open $filename r]
+ set contents [read $file]
+ close $file
+ return $contents
+}
+
+proc verbose_eval { expr { level 1 } } {
+ global verbose
+ if $verbose>$level then { eval verbose "$expr" $level }
+}
projects / binutils-gdb.git / commitdiff