Build "Das U-Boot" Boot Monitor
if BR2_TARGET_UBOOT
+config BR2_TARGET_UBOOT_BOARDNAME
+ string "board name"
+ depends on BR2_TARGET_UBOOT
+ default "$(BOARD_NAME)"
+ help
+ One of U-Boot supported boards to be built.
+ This will be suffixed with _config to meet U-Boot standard naming.
+
choice
prompt "U-Boot Version"
default BR2_TARGET_UBOOT_2009_01_RC1
config BR2_TARGET_UBOOT_2009_01_RC1
bool "u-boot-2009.01-rc1"
depends on BR2_TARGET_UBOOT
- help
- Use u-boot from December 2008 (RC1)
config BR2_TARGET_UBOOT_2008_10
bool "u-boot-2008.10"
depends on BR2_TARGET_UBOOT
- help
- Use u-boot from October 2008
config BR2_TARGET_UBOOT_1_3_4
bool "u-boot-1.3.4"
depends on BR2_TARGET_UBOOT
- help
- Use u-boot from mid 2008
config BR2_TARGET_UBOOT_2009_01
bool "u-boot-2009.01"
depends on BR2_TARGET_UBOOT
- help
- Use u-boot from January 2009
- Release date 2009-01-17
endchoice
default "1.3.4" if BR2_TARGET_UBOOT_1_3_4
default "2009.01" if BR2_TARGET_UBOOT_2009_01
-config BR2_TARGET_UBOOT_BOARDNAME
- string "board name"
- depends on BR2_TARGET_UBOOT
- default "$(BOARD_NAME)"
- help
- One of U-Boot supported boards to be built.
- This will be suffixed with _config to meet U-Boot standard naming.
-
config BR2_TARGET_UBOOT_CUSTOM_PATCH
string "custom patch"
depends on BR2_TARGET_UBOOT
config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASHCARD
bool "Boot from dataflashcard"
depends on BR2_BOOTSOURCE_DATAFLASHCARD
- help
-
config BR2_TARGET_UBOOT_BOOTSOURCE_DATAFLASH
bool "Boot from dataflash
depends on BR2_BOOTSOURCE_DATAFLASH
- help
-
config BR2_TARGET_UBOOT_BOOTSOURCE_NANDFLASH
bool "Boot from a NAND flash"
depends on BR2_BOOTSOURCE_NANDFLASH
- help
- Build u-boot with environment in the NAND flash
config BR2_TARGET_UBOOT_BOOTSOURCE_FLASH
bool "Boot from a parallell flash"
depends on BR2_BOOTSOURCE_FLASH
- help
- Build u-boot with environment in a flash RAM
config BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD
- bool "Boot from a NAND flash"
+ bool "Boot from an SD-Card"
depends on BR2_BOOTSOURCE_SDCARD
- help
- Build u-boot with environment on an SD-Card
- Not yet supported
config BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM
- bool "Boot from a serial EEPROM"
+ bool "Boot from a serial EEPROM (Not yet supported)"
depends on BR2_BOOTSOURCE_EEPROM
- help
- Build u-boot with environment in a serial EEPROM
- Not yet supported
-
endchoice
default "sdcard" if BR2_TARGET_UBOOT_BOOTSOURCE_SDCARD
default "eeprom" if BR2_TARGET_UBOOT_BOOTSOURCE_EEPROM
+config BR2_TARGET_UBOOT_SILENT
+ bool "silent console"
+ depends on BR2_TARGET_UBOOT
+ help
+ If the option has been enabled, the output can be
+ silenced by setting the environment variable "silent".
+
+config BR2_TARGET_UBOOT_TOOL_MKIMAGE
+ bool "mkimage tool in target"
+ depends on BR2_TARGET_UBOOT
+ help
+ Install mkimage tool in target.
+
+config BR2_TARGET_UBOOT_TOOL_ENV
+ bool "fw_printenv tool in target"
+ depends on BR2_TARGET_UBOOT
+ help
+ Install fw_printenv / fw_setenv tools in target.
+
+
+choice
+ prompt "SDRAM Memory size"
+ default BR2_TARGET_UBOOT_SDRAM_SIZE_64M
+ help
+ Size of the onboard SDRAM
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_256MB
+ bool "256 MB"
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_128MB
+ bool "128 MB"
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_64MB
+ bool "64 MB"
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_32MB
+ bool "32 MB"
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_16MB
+ bool "16 MB"
+
+config BR2_TARGET_UBOOT_SDRAM_SIZE_8MB
+ bool "8 MB"
+
+endchoice
+
+config BR2_TARGET_UBOOT_MEMORY_SIZE
+ string
+ default "256M" if BR2_TARGET_UBOOT_SDRAM_SIZE_256MB
+ default "128M" if BR2_TARGET_UBOOT_SDRAM_SIZE_128MB
+ default "64M" if BR2_TARGET_UBOOT_SDRAM_SIZE_64MB
+ default "32M" if BR2_TARGET_UBOOT_SDRAM_SIZE_32MB
+ default "16M" if BR2_TARGET_UBOOT_SDRAM_SIZE_16MB
+ default "8M" if BR2_TARGET_UBOOT_SDRAM_SIZE_8MB
+
+choice
+ prompt "Kernel Size"
+ default BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
+ bool "Kernel size is less than 1.25 MB"
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
+ bool "Kernel size is less than 1.50 MB"
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
+ bool "Kernel size is less than 1.75 MB"
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
+ bool "Kernel size is less than 2.00 MB"
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
+ bool "Kernel size is less than 2.25 MB"
+
+config BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
+ bool "Kernel size is less than 2.50 MB"
+
+endchoice
+
+choice
+ prompt "Dataflash Size"
+ default BR2_TARGET_UBOOT_DATAFLASH_SIZE_2_00MB
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB
+ bool "Dataflash size is 8 MB"
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB
+ bool "Dataflash size is 4 MB"
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB
+ bool "Dataflash size is 2 MB"
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB
+ bool "Dataflash size is 1 MB"
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB
+ bool "Dataflash size is 0.5 MB"
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB
+ bool "Dataflash size is 0.25 MB"
+
+endchoice
+
+config BR2_TARGET_UBOOT_DATAFLASH_SIZE
+ string
+ default "8M" if BR2_TARGET_DATAFLASH_SIZE_8MB
+ default "4M" if BR2_TARGET_DATAFLASH_SIZE_4MB
+ default "2M" if BR2_TARGET_DATAFLASH_SIZE_2MB
+ default "1M" if BR2_TARGET_DATAFLASH_SIZE_1MB
+ default "0.5M" if BR2_TARGET_DATAFLASH_SIZE_0_50MB
+ default "0.25M" if BR2_TARGET_DATAFLASH_SIZE_0_25MB
+
+config BR2_TARGET_UBOOT_END_OF_FLASH
+ string
+ default "C083FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_8MB
+ default "C041FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_4MB
+ default "C020FFFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_2MB
+ default "C0107FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_1MB
+ default "C0083FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_50MB
+ default "C0041FFF" if BR2_TARGET_UBOOT_DATAFLASH_SIZE_0_25MB
+ help
+
+
+config BR2_TARGET_UBOOT_KERNEL_START
+ string "Kernel SDRAM address"
+ default "21000000"
+ help
+ Kernel is loaded to this address in SDRAM
+
+config BR2_TARGET_UBOOT_KERNEL_LOCATION
+ string "Kernel flash address"
+ default "C0042000"
+ help
+ Kernel location in dataflash
+
+config BR2_TARGET_UBOOT_FILESYSTEM_START
+ string
+ default "2114A000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
+ default "2118C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
+ default "211CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
+ default "21210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
+ default "21252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
+ default "21294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
+ help
+ Kernel is loaded to this SDRAM address
+ Assumes SDRAM starts at 20000000
+ Will need to be updated if the SDRAM is located elsewhere
+
+config BR2_TARGET_UBOOT_FILESYSTEM_LOCATION
+ string
+ default "C018C000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_25MB
+ default "C01CE000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_50MB
+ default "C0210000" if BR2_TARGET_UBOOT_KERNEL_SIZE_1_75MB
+ default "C0252000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_00MB
+ default "C0294000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_25MB
+ default "C02D6000" if BR2_TARGET_UBOOT_KERNEL_SIZE_2_50MB
+ help
+ Determine location for File System in Dataflash
+ This needs to be updated for other memory technologies
+
+config BR2_TARGET_UBOOT_FILESYSTEM_SIZE
+ string "File System Size"
+ default "6000000"
+ help
+
+
+menuconfig BR2_TARGET_UBOOT_NETWORK
+ bool "Network Settings"
+ default y
+ depends on BR2_TARGET_UBOOT
+ help
+ Network settings for U-boot
+
+if BR2_TARGET_UBOOT_NETWORK
+
config BR2_TARGET_UBOOT_SERVERIP
string "server ip"
depends on BR2_TARGET_UBOOT
depends on BR2_TARGET_AVR32
help
Target MAC address for the second ethernet interface.
+endif
-config BR2_TARGET_UBOOT_SILENT
- bool "silent console"
- depends on BR2_TARGET_UBOOT
- help
- If the option has been enabled, the output can be
- silenced by setting the environment variable "silent".
-
-config BR2_TARGET_UBOOT_TOOL_MKIMAGE
- bool "mkimage tool in target"
- depends on BR2_TARGET_UBOOT
- help
- Install mkimage tool in target.
-
-config BR2_TARGET_UBOOT_TOOL_ENV
- bool "fw_printenv tool in target"
- depends on BR2_TARGET_UBOOT
- help
- Install fw_printenv / fw_setenv tools in target.
endif
config BR2_BOOTSOURCE_DATAFLASHCARD
projects / buildroot.git / commitdiff