+Sat Mar 14 20:53:36 1998 Doug Evans <devans@seba.cygnus.com>
+
+ * config.in (HAVE_FCNTL_H): Add.
+ * configure: Regenerate.
+ * Makefile.in (SIM_OBJS): Add devices.o.
+ * m32r-sim.h (m32r_devices): Renamed from m32r_mspr_device.
+ (UART_*): Define m32r serial port parameters.
+ (M32R_DEVICE_ADDR,M32R_DEVICE_LEN): Define.
+ * m32r.c (device_io_{read,write}_buffer,device_error): Move from here,
+ * devices.c: To here.
+ * sim-if.c: Don't include signal.h,sim-core.h.
+ (sim_open): Use M32R_DEVICE_{ADDR,LEN} in sim_core_attach call.
+ (sim_resume): Call sim_module_{resume,suspend}.
+ * m32r.c (m32r_h_cr_{get,set}): Use register number enums.
+
+ * tconfig.in (SIM_HANDLES_LMA): Define.
+
+ * sim-if.c (do_trap): Result is new pc.
+ Handle --environment=operating.
+ * sem-switch.c,sem.c: Regenerate.
+start-sanitize-m32rx
+ * semx.c: Regenerate.
+end-sanitize-m32rx
+
+Wed Mar 11 14:07:39 1998 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * sim-if.c (syscall_read_mem, syscall_write_mem): Replace
+ sim_core_*_map with read_map, write_map, exec_map resp.
+
Wed Mar 4 11:36:51 1998 Doug Evans <devans@seba.cygnus.com>
* Makefile.in (SIM_EXTRA_DEPS): Add cpu-opc.h.
# Check for common headers.
# FIXME: Seems to me this can cause problems for i386-windows hosts.
# At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*.
-for ac_hdr in stdlib.h string.h strings.h unistd.h time.h sys/time.h sys/resource.h
+for ac_hdr in stdlib.h string.h strings.h unistd.h time.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
fi
done
+for ac_hdr in sys/time.h sys/resource.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:1139: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1144 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1149: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in fcntl.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:1179: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1184 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1189: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
for ac_func in getrusage time sigaction
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1138: checking for $ac_func" >&5
+echo "configure:1218: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1143 "configure"
+#line 1223 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1166: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1246: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
+USE_MAINTAINER_MODE=no
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
case "${enableval}" in
- yes) MAINT="" ;;
+ yes) MAINT="" USE_MAINTAINER_MODE=yes ;;
no) MAINT="#" ;;
*) { echo "configure: error: "--enable-maintainer-mode does not take a value"" 1>&2; exit 1; }; MAINT="#" ;;
esac
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:1338: checking return type of signal handlers" >&5
+echo "configure:1419: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1343 "configure"
+#line 1424 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
int i;
; return 0; }
EOF
-if { (eval echo configure:1360: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1441: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
if test "x$cross_compiling" = "xno"; then
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:1513: checking whether byte ordering is bigendian" >&5
+echo "configure:1594: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
-#line 1520 "configure"
+#line 1601 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:1531: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1612: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
-#line 1535 "configure"
+#line 1616 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:1546: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1627: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 1566 "configure"
+#line 1647 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
-if { (eval echo configure:1579: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
fi
+if test ${USE_MAINTAINER_MODE} = yes ; then
+ # Extract the first word of "guile", so it can be a program name with args.
+set dummy guile; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1754: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_SCHEME'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$SCHEME"; then
+ ac_cv_prog_SCHEME="$SCHEME" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_SCHEME="guile"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_SCHEME" && ac_cv_prog_SCHEME="guile"
+fi
+fi
+SCHEME="$ac_cv_prog_SCHEME"
+if test -n "$SCHEME"; then
+ echo "$ac_t""$SCHEME" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
trap '' 1 2 15
s%@sim_stdio@%$sim_stdio%g
s%@sim_trace@%$sim_trace%g
s%@sim_profile@%$sim_profile%g
+s%@SCHEME@%$SCHEME%g
CEOF
EOF
TRACE_RESULT (current_cpu, "h-ie-0", 'x', CPU (h_ie));
CPU (h_cond) = OPRND (h_bcond_0);
TRACE_RESULT (current_cpu, "condbit", 'x', CPU (h_cond));
- BRANCH_NEW_PC (new_pc, SEM_BRANCH_VIA_ADDR (sem_arg, OPRND (h_bpc_0)));
+ BRANCH_NEW_PC (new_pc, SEM_BRANCH_VIA_ADDR (sem_arg, ANDSI (OPRND (h_bpc_0), -4)));
TRACE_RESULT (current_cpu, "pc", 'x', CPU (h_pc));
} while (0);
do {
m32rx_h_cr_set (current_cpu, 6, ADDSI (OPRND (pc), 4));
TRACE_RESULT (current_cpu, "h-cr-6", 'x', m32rx_h_cr_get (current_cpu, 6));
-m32rx_h_cr_set (current_cpu, 0, ANDSI (SRLSI (OPRND (h_cr_0), 8), 33488896));
+m32rx_h_cr_set (current_cpu, 0, ANDSI (SLLSI (OPRND (h_cr_0), 8), 65408));
TRACE_RESULT (current_cpu, "h-cr-0", 'x', m32rx_h_cr_get (current_cpu, 0));
-do_trap (current_cpu, OPRND (uimm4));
-; /*clobber*/
+ BRANCH_NEW_PC (new_pc, SEM_BRANCH_VIA_ADDR (sem_arg, do_trap (current_cpu, OPRND (uimm4))));
+ TRACE_RESULT (current_cpu, "pc", 'x', CPU (h_pc));
} while (0);
#if WITH_PROFILE_MODEL_P
projects / binutils-gdb.git / commitdiff