AC_SUBST($1)])
-# serial 25 AM_PROG_LIBTOOL
-AC_DEFUN(AM_PROG_LIBTOOL,
-[AC_REQUIRE([AM_ENABLE_SHARED])dnl
-AC_REQUIRE([AM_ENABLE_STATIC])dnl
+# serial 35 AC_PROG_LIBTOOL
+AC_DEFUN(AC_PROG_LIBTOOL,
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+
+# Save cache, so that ltconfig can load it
+AC_CACHE_SAVE
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
+DLLTOOL="$DLLTOOL" AS="$AS" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+|| AC_MSG_ERROR([libtool configure failed])
+
+# Reload cache, that may have been modified by ltconfig
+AC_CACHE_LOAD
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+AC_DEFUN(AC_LIBTOOL_SETUP,
+[AC_PREREQ(2.13)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AM_PROG_LD])dnl
-AC_REQUIRE([AM_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([AC_SYS_NM_PARSE])dnl
+AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
# Check for any special flags to pass to ltconfig.
-libtool_flags=
+libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
;;
*-*-cygwin*)
- AM_SYS_LIBTOOL_CYGWIN
+ AC_SYS_LIBTOOL_CYGWIN
;;
esac
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
+# enable the --disable-libtool-lock switch
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
+AC_ARG_ENABLE(libtool-lock,
+[ --disable-libtool-lock force libtool not to do file locking],
+need_locks=$enableval,
+need_locks=yes)
+
+if test x"$need_locks" = xno; then
+ libtool_flags="$libtool_flags --disable-lock"
+fi
])
-# AM_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AM_ENABLE_SHARED[(DEFAULT)]
+# AC_LIBTOOL_DLOPEN - check for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes])
+
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AM_ENABLE_SHARED,
-[define([AM_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED,
+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
-<< --enable-shared[=PKGS] build shared libraries [default=>>AM_ENABLE_SHARED_DEFAULT],
+<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
IFS="$ac_save_ifs"
;;
esac],
-enable_shared=AM_ENABLE_SHARED_DEFAULT)dnl
+enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])
-# AM_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AM_DISABLE_SHARED,
-[AM_ENABLE_SHARED(no)])
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN(AC_DISABLE_SHARED,
+[AC_ENABLE_SHARED(no)])
-# AM_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AM_DISABLE_STATIC,
-[AM_ENABLE_STATIC(no)])
-
-# AM_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AM_ENABLE_STATIC[(DEFAULT)]
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN(AM_ENABLE_STATIC,
-[define([AM_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC,
+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
-<< --enable-static[=PKGS] build static libraries [default=>>AM_ENABLE_STATIC_DEFAULT],
+<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
IFS="$ac_save_ifs"
;;
esac],
-enable_static=AM_ENABLE_STATIC_DEFAULT)dnl
+enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+])
+
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN(AC_DISABLE_STATIC,
+[AC_ENABLE_STATIC(no)])
+
+
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AC_ENABLE_FAST_INSTALL,
+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(fast-install,
+changequote(<<, >>)dnl
+<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])
+# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN(AC_DISABLE_FAST_INSTALL,
+[AC_ENABLE_FAST_INSTALL(no)])
+
-# AM_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AM_PROG_LD,
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
- # Accept absolute paths.
+ # Accept absolute paths.
changequote(,)dnl
- /* | [A-Za-z]:\\*)
+ /* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
- test -z "$LD" && LD="$ac_prog"
- ;;
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
- test "$with_gnu_ld" != yes && break
+ test "$with_gnu_ld" != yes && break
fi
fi
done
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_SUBST(LD)
-AM_PROG_LD_GNU
+AC_PROG_LD_GNU
])
-AC_DEFUN(AM_PROG_LD_GNU,
+AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
fi])
])
-# AM_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AM_PROG_NM,
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
+ ac_cv_path_NM="$ac_dir/nm -B"
+ break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
+ ac_cv_path_NM="$ac_dir/nm -p"
+ break
else
- ac_cv_path_NM="$ac_dir/nm"
+ ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
fi
- break
fi
done
IFS="$ac_save_ifs"
AC_SUBST(NM)
])
-# AM_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
-AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN,
+# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed
+# by C symbol name from nm.
+AC_DEFUN(AC_SYS_NM_PARSE,
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output])
+AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
+[# These are sane defaults that work on at least a few old systems.
+# {They come from Ultrix. What could be older than Ultrix?!! ;)}
+
+changequote(,)dnl
+# Character class describing NM global symbol codes.
+ac_symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform the above into a raw symbol and a C symbol.
+ac_symxfrm='\1 \2\3 \3'
+
+# Transform an extracted symbol line into a proper C declaration
+ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+
+# Define system-specific variables.
+case "$host_os" in
+aix*)
+ ac_symcode='[BCDT]'
+ ;;
+cygwin* | mingw*)
+ ac_symcode='[ABCDGISTW]'
+ ;;
+hpux*)
+ ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+ ;;
+irix*)
+ ac_symcode='[BCDEGRST]'
+ ;;
+solaris*)
+ ac_symcode='[BDT]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+ ac_symcode='[ABCDGISTW]'
+fi
+changequote([,])dnl
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+ ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($ac_symcode\)[ ][ ]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
+
+ # Check to see that the pipe works correctly.
+ ac_pipe_works=no
+ rm -f conftest.$ac_ext
+ cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func;return 0;}
+EOF
+
+ if AC_TRY_EVAL(ac_compile); then
+ # Now try to grab the symbols.
+ ac_nlist=conftest.nm
+
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
+
+ # Try sorting and uniquifying the output.
+ if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
+ mv -f "$ac_nlist"T "$ac_nlist"
+ else
+ rm -f "$ac_nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
+ if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
+ cat <<EOF > conftest.c
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+ # Now generate the symbol file.
+ eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
+
+ cat <<EOF >> conftest.c
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ lt_ptr_t address;
+}
+changequote(,)dnl
+lt_preloaded_symbols[] =
+changequote([,])dnl
+{
+EOF
+ sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
+ cat <<\EOF >> conftest.c
+ {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftestm.$ac_objext
+ ac_save_LIBS="$LIBS"
+ ac_save_CFLAGS="$CFLAGS"
+ LIBS="conftestm.$ac_objext"
+ CFLAGS="$CFLAGS$no_builtin_flag"
+ if AC_TRY_EVAL(ac_link) && test -s conftest; then
+ ac_pipe_works=yes
+ else
+ echo "configure: failed program was:" >&AC_FD_CC
+ cat conftest.c >&AC_FD_CC
+ fi
+ LIBS="$ac_save_LIBS"
+ CFLAGS="$ac_save_CFLAGS"
+ else
+ echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
+ fi
+ else
+ echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
+ fi
+ else
+ echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
+ fi
+ else
+ echo "$progname: failed program was:" >&AC_FD_CC
+ cat conftest.c >&AC_FD_CC
+ fi
+ rm -rf conftest*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$ac_pipe_works" = yes; then
+ if test x"$ac_symprfx" = x"_"; then
+ ac_cv_sys_symbol_underscore=yes
+ else
+ ac_cv_sys_symbol_underscore=no
+ fi
+ break
+ else
+ ac_cv_sys_global_symbol_pipe=
+ fi
+done
+])
+
+ac_result=yes
+if test -z "$ac_cv_sys_global_symbol_pipe"; then
+ ac_result=no
+fi
+AC_MSG_RESULT($ac_result)
+])
+
+# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
+AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN,
[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
])
+# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
+# with an underscore?
+AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE,
+[AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([AC_SYS_NM_PARSE])dnl
+AC_MSG_CHECKING([for _ prefix in compiled symbols])
+AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
+[ac_cv_sys_symbol_underscore=no
+cat > conftest.$ac_ext <<EOF
+void nm_test_func(){}
+int main(){nm_test_func;return 0;}
+EOF
+if AC_TRY_EVAL(ac_compile); then
+ # Now try to grab the symbols.
+ ac_nlist=conftest.nm
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
+ # See whether the symbols have a leading underscore.
+ if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
+ ac_cv_sys_symbol_underscore=yes
+ else
+ if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
+ :
+ else
+ echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
+ fi
+ fi
+ else
+ echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
+ fi
+else
+ echo "configure: failed program was:" >&AC_FD_CC
+ cat conftest.c >&AC_FD_CC
+fi
+rm -rf conftest*
+])
+AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
+USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
+AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl
+])
+
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM, [
+AC_CHECK_LIB(mw, _mwvalidcheckl)
+AC_CHECK_LIB(m, cos)
+])
+
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library, adds --enable-ltdl-convenience to
+# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'. Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
+ case "$enable_ltdl_convenience" in
+ no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+ "") enable_ltdl_convenience=yes
+ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+ esac
+ LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+])
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library, and adds --enable-ltdl-install to
+# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'. Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [
+ AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [
+ case "$enable_ltdl_install" in
+ no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;;
+ "") enable_ltdl_install=yes
+ ac_configure_args="$ac_configure_args --enable-ltdl-install" ;;
+ esac
+ ])
+ if test x"$enable_ltdl_install" != x"no"; then
+ LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+ fi
+])
+
+dnl old names
+AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
+AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
+AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
+AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl
+AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl
+AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl
+
# Like AC_CONFIG_HEADER, but automatically create stamp file.
AC_DEFUN(AM_CONFIG_HEADER,
--enable-shared[=PKGS] build shared libraries [default=no]"
ac_help="$ac_help
--enable-static[=PKGS] build static libraries [default=yes]"
+ac_help="$ac_help
+ --enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
+ac_help="$ac_help
+ --disable-libtool-lock force libtool not to do file locking"
ac_help="$ac_help
--enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes)"
ac_help="$ac_help
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:594: checking host system type" >&5
+echo "configure:598: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:615: checking target system type" >&5
+echo "configure:619: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:633: checking build system type" >&5
+echo "configure:637: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:658: checking for $ac_word" >&5
+echo "configure:662: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:688: checking for $ac_word" >&5
+echo "configure:692: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:739: checking for $ac_word" >&5
+echo "configure:743: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:771: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:775: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 782 "configure"
+#line 786 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:787: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:791: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:813: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:817: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:818: checking whether we are using GNU C" >&5
+echo "configure:822: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:827: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:831: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:846: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:850: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:878: checking for POSIXized ISC" >&5
+echo "configure:882: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:911: checking for a BSD compatible install" >&5
+echo "configure:915: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:964: checking whether build environment is sane" >&5
+echo "configure:968: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1021: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1025: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1067: checking for working aclocal" >&5
+echo "configure:1071: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1080: checking for working autoconf" >&5
+echo "configure:1084: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1093: checking for working automake" >&5
+echo "configure:1097: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1106: checking for working autoheader" >&5
+echo "configure:1110: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1119: checking for working makeinfo" >&5
+echo "configure:1123: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1142: checking for $ac_word" >&5
+echo "configure:1146: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1174: checking for $ac_word" >&5
+echo "configure:1178: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1206: checking for $ac_word" >&5
+echo "configure:1210: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
enable_static=yes
fi
+# Check whether --enable-fast-install or --disable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+ enableval="$enable_fast_install"
+ p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_fast_install=yes
+fi
+
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1289: checking for $ac_word" >&5
+echo "configure:1316: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
with_gnu_ld=no
fi
-
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1329: checking for ld used by GCC" >&5
+echo "configure:1355: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
- # Accept absolute paths.
- /* | [A-Za-z]:\\*)
- test -z "$LD" && LD="$ac_prog"
- ;;
+ # Accept absolute paths.
+ /* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1347: checking for GNU ld" >&5
+echo "configure:1379: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1350: checking for non-GNU ld" >&5
+echo "configure:1382: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
- test "$with_gnu_ld" != yes && break
+ test "$with_gnu_ld" != yes && break
fi
fi
done
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1386: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1418: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1402: checking for BSD-compatible nm" >&5
+echo "configure:1434: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
+ ac_cv_path_NM="$ac_dir/nm -B"
+ break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
+ ac_cv_path_NM="$ac_dir/nm -p"
+ break
else
- ac_cv_path_NM="$ac_dir/nm"
+ ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
fi
- break
fi
done
IFS="$ac_save_ifs"
echo "$ac_t""$NM" 1>&6
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
+echo "configure:1472: checking command to parse $NM output" >&5
+if eval "test \"`echo '$''{'ac_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # These are sane defaults that work on at least a few old systems.
+# {They come from Ultrix. What could be older than Ultrix?!! ;)}
+
+# Character class describing NM global symbol codes.
+ac_symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform the above into a raw symbol and a C symbol.
+ac_symxfrm='\1 \2\3 \3'
+
+# Transform an extracted symbol line into a proper C declaration
+ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+
+# Define system-specific variables.
+case "$host_os" in
+aix*)
+ ac_symcode='[BCDT]'
+ ;;
+cygwin* | mingw*)
+ ac_symcode='[ABCDGISTW]'
+ ;;
+hpux*)
+ ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+ ;;
+irix*)
+ ac_symcode='[BCDEGRST]'
+ ;;
+solaris*)
+ ac_symcode='[BDT]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+ ac_symcode='[ABCDGISTW]'
+fi
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+ ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* \($ac_symcode\) *\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
+
+ # Check to see that the pipe works correctly.
+ ac_pipe_works=no
+ rm -f conftest.$ac_ext
+ cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func;return 0;}
+EOF
+
+ if { (eval echo configure:1535: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ # Now try to grab the symbols.
+ ac_nlist=conftest.nm
+
+ if { (eval echo configure:1539: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
+
+ # Try sorting and uniquifying the output.
+ if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
+ mv -f "$ac_nlist"T "$ac_nlist"
+ else
+ rm -f "$ac_nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
+ if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
+ cat <<EOF > conftest.c
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+ # Now generate the symbol file.
+ eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
+
+ cat <<EOF >> conftest.c
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{
+EOF
+ sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
+ cat <<\EOF >> conftest.c
+ {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftestm.$ac_objext
+ ac_save_LIBS="$LIBS"
+ ac_save_CFLAGS="$CFLAGS"
+ LIBS="conftestm.$ac_objext"
+ CFLAGS="$CFLAGS$no_builtin_flag"
+ if { (eval echo configure:1591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ ac_pipe_works=yes
+ else
+ echo "configure: failed program was:" >&5
+ cat conftest.c >&5
+ fi
+ LIBS="$ac_save_LIBS"
+ CFLAGS="$ac_save_CFLAGS"
+ else
+ echo "cannot find nm_test_func in $ac_nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $ac_nlist" >&5
+ fi
+ else
+ echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.c >&5
+ fi
+ rm -rf conftest*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$ac_pipe_works" = yes; then
+ if test x"$ac_symprfx" = x"_"; then
+ ac_cv_sys_symbol_underscore=yes
+ else
+ ac_cv_sys_symbol_underscore=no
+ fi
+ break
+ else
+ ac_cv_sys_global_symbol_pipe=
+ fi
+done
+
+fi
+
+
+ac_result=yes
+if test -z "$ac_cv_sys_global_symbol_pipe"; then
+ ac_result=no
+fi
+echo "$ac_t""$ac_result" 1>&6
+
+echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6
+echo "configure:1637: checking for _ prefix in compiled symbols" >&5
+if eval "test \"`echo '$''{'ac_cv_sys_symbol_underscore'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_cv_sys_symbol_underscore=no
+cat > conftest.$ac_ext <<EOF
+void nm_test_func(){}
+int main(){nm_test_func;return 0;}
+EOF
+if { (eval echo configure:1646: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ # Now try to grab the symbols.
+ ac_nlist=conftest.nm
+ if { (eval echo configure:1649: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
+ # See whether the symbols have a leading underscore.
+ if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
+ ac_cv_sys_symbol_underscore=yes
+ else
+ if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
+ :
+ else
+ echo "configure: cannot find nm_test_func in $ac_nlist" >&5
+ fi
+ fi
+ else
+ echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.c >&5
+fi
+rm -rf conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6
+USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
+
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1437: checking whether ln -s works" >&5
+echo "configure:1675: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
# Check for any special flags to pass to ltconfig.
-libtool_flags=
+libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
case "$host" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1473 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1474: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1711 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1712: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
+ echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
+echo "configure:1733: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1738 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:1745: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
;;
*-*-cygwin*)
# Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ac_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1499: checking for $ac_word" >&5
+echo "configure:1768: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1531: checking for $ac_word" >&5
+echo "configure:1800: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
set dummy ${ac_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1566: checking for $ac_word" >&5
+echo "configure:1835: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1598: checking for $ac_word" >&5
+echo "configure:1867: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
esac
+# enable the --disable-libtool-lock switch
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ need_locks=$enableval
+else
+ need_locks=yes
+fi
+
+
+if test x"$need_locks" = xno; then
+ libtool_flags="$libtool_flags --disable-lock"
+fi
+
+
+# Save cache, so that ltconfig can load it
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+# Reload cache, that may have been modified by ltconfig
+if test -r "$cache_file"; then
+ echo "loading cache $cache_file"
+ . $cache_file
+else
+ echo "creating cache $cache_file"
+ > $cache_file
+fi
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1718: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:2068: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:1741: checking for Cygwin environment" >&5
+echo "configure:2091: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1746 "configure"
+#line 2096 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:1757: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2107: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:1774: checking for mingw32 environment" >&5
+echo "configure:2124: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1779 "configure"
+#line 2129 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:1786: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2136: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1805: checking for executable suffix" >&5
+echo "configure:2155: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:1815: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:2165: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj | *.ilk | *.pdb) ;;
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1844: checking for $ac_word" >&5
+echo "configure:2194: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1874: checking for $ac_word" >&5
+echo "configure:2224: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1925: checking for $ac_word" >&5
+echo "configure:2275: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1957: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2307: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1968 "configure"
+#line 2318 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1973: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2323: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1999: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2349: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2004: checking whether we are using GNU C" >&5
+echo "configure:2354: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2013: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2363: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2032: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2382: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ALL_LINGUAS=
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2066: checking how to run the C preprocessor" >&5
+echo "configure:2416: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2081 "configure"
+#line 2431 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2087: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2437: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2098 "configure"
+#line 2448 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2454: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2115 "configure"
+#line 2465 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2121: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2471: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2146: checking for ANSI C header files" >&5
+echo "configure:2496: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2151 "configure"
+#line 2501 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2159: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2509: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2176 "configure"
+#line 2526 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2194 "configure"
+#line 2544 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2215 "configure"
+#line 2565 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2226: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2576: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2250: checking for working const" >&5
+echo "configure:2600: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2255 "configure"
+#line 2605 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2304: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2654: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2325: checking for inline" >&5
+echo "configure:2675: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 2332 "configure"
+#line 2682 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:2339: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2689: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2365: checking for off_t" >&5
+echo "configure:2715: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2370 "configure"
+#line 2720 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2398: checking for size_t" >&5
+echo "configure:2748: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2403 "configure"
+#line 2753 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2433: checking for working alloca.h" >&5
+echo "configure:2783: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2438 "configure"
+#line 2788 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2445: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2795: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2466: checking for alloca" >&5
+echo "configure:2816: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2471 "configure"
+#line 2821 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2499: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2849: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2531: checking whether alloca needs Cray hooks" >&5
+echo "configure:2881: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2536 "configure"
+#line 2886 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2561: checking for $ac_func" >&5
+echo "configure:2911: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2566 "configure"
+#line 2916 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2589: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2939: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2616: checking stack direction for C alloca" >&5
+echo "configure:2966: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 2624 "configure"
+#line 2974 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:2643: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2993: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2668: checking for $ac_hdr" >&5
+echo "configure:3018: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2673 "configure"
+#line 3023 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2678: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3028: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2707: checking for $ac_func" >&5
+echo "configure:3057: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2712 "configure"
+#line 3062 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2735: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3085: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2760: checking for working mmap" >&5
+echo "configure:3110: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 2768 "configure"
+#line 3118 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:2908: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2936: checking for $ac_hdr" >&5
+echo "configure:3286: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2941 "configure"
+#line 3291 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2946: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3296: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2976: checking for $ac_func" >&5
+echo "configure:3326: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2981 "configure"
+#line 3331 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3004: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3354: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3033: checking for $ac_func" >&5
+echo "configure:3383: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3038 "configure"
+#line 3388 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3411: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3095: checking for LC_MESSAGES" >&5
+echo "configure:3445: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3100 "configure"
+#line 3450 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:3107: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3457: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3128: checking whether NLS is requested" >&5
+echo "configure:3478: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3148: checking whether included gettext is requested" >&5
+echo "configure:3498: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3167: checking for libintl.h" >&5
+echo "configure:3517: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3172 "configure"
+#line 3522 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3177: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3527: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3194: checking for gettext in libc" >&5
+echo "configure:3544: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3199 "configure"
+#line 3549 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3206: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3556: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3222: checking for bindtextdomain in -lintl" >&5
+echo "configure:3572: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3230 "configure"
+#line 3580 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:3241: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3257: checking for gettext in libintl" >&5
+echo "configure:3607: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3262 "configure"
+#line 3612 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3619: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3297: checking for $ac_word" >&5
+echo "configure:3647: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3331: checking for $ac_func" >&5
+echo "configure:3681: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3336 "configure"
+#line 3686 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3359: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3709: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3386: checking for $ac_word" >&5
+echo "configure:3736: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3422: checking for $ac_word" >&5
+echo "configure:3772: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 3454 "configure"
+#line 3804 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:3462: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3812: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3494: checking for $ac_word" >&5
+echo "configure:3844: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3528: checking for $ac_word" >&5
+echo "configure:3878: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3564: checking for $ac_word" >&5
+echo "configure:3914: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:3654: checking for catalogs to be installed" >&5
+echo "configure:4004: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:3682: checking for linux/version.h" >&5
+echo "configure:4032: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3687 "configure"
+#line 4037 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3692: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4042: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:3770: checking for a BSD compatible install" >&5
+echo "configure:4120: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
EXEEXT_FOR_BUILD='$(EXEEXT)'
else
echo $ac_n "checking for build system executable suffix""... $ac_c" 1>&6
-echo "configure:3853: checking for build system executable suffix" >&5
+echo "configure:4203: checking for build system executable suffix" >&5
if eval "test \"`echo '$''{'bfd_cv_build_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3878: checking for $ac_hdr" >&5
+echo "configure:4228: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3883 "configure"
+#line 4233 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3888: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4238: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3918: checking for $ac_hdr" >&5
+echo "configure:4268: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3923 "configure"
+#line 4273 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3928: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4278: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:3955: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:4305: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3960 "configure"
+#line 4310 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:3969: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4319: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:3994: checking for $ac_hdr that defines DIR" >&5
+echo "configure:4344: checking for $ac_hdr that defines DIR" >&5
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3999 "configure"
+#line 4349 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:4007: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4357: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:4032: checking for opendir in -ldir" >&5
+echo "configure:4382: checking for opendir in -ldir" >&5
ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4040 "configure"
+#line 4390 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:4051: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:4073: checking for opendir in -lx" >&5
+echo "configure:4423: checking for opendir in -lx" >&5
ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4081 "configure"
+#line 4431 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:4092: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4442: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in fcntl getpagesize setitimer sysconf fdopen
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4117: checking for $ac_func" >&5
+echo "configure:4467: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4122 "configure"
+#line 4472 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4145: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4495: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
esac
echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6
-echo "configure:4180: checking whether strstr must be declared" >&5
+echo "configure:4530: checking whether strstr must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4185 "configure"
+#line 4535 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) strstr
; return 0; }
EOF
-if { (eval echo configure:4206: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4556: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_strstr=no
else
fi
echo $ac_n "checking whether malloc must be declared""... $ac_c" 1>&6
-echo "configure:4227: checking whether malloc must be declared" >&5
+echo "configure:4577: checking whether malloc must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4232 "configure"
+#line 4582 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) malloc
; return 0; }
EOF
-if { (eval echo configure:4253: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4603: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_malloc=no
else
fi
echo $ac_n "checking whether realloc must be declared""... $ac_c" 1>&6
-echo "configure:4274: checking whether realloc must be declared" >&5
+echo "configure:4624: checking whether realloc must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_realloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4279 "configure"
+#line 4629 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) realloc
; return 0; }
EOF
-if { (eval echo configure:4300: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4650: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_realloc=no
else
fi
echo $ac_n "checking whether free must be declared""... $ac_c" 1>&6
-echo "configure:4321: checking whether free must be declared" >&5
+echo "configure:4671: checking whether free must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4326 "configure"
+#line 4676 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) free
; return 0; }
EOF
-if { (eval echo configure:4347: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4697: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_free=no
else
fi
echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6
-echo "configure:4368: checking whether getenv must be declared" >&5
+echo "configure:4718: checking whether getenv must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4373 "configure"
+#line 4723 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) getenv
; return 0; }
EOF
-if { (eval echo configure:4394: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4744: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_getenv=no
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4595: checking for $ac_hdr" >&5
+echo "configure:4945: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4600 "configure"
+#line 4950 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4605: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test "$ac_cv_header_sys_procfs_h" = yes; then
echo $ac_n "checking for prstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4633: checking for prstatus_t in sys/procfs.h" >&5
+echo "configure:4983: checking for prstatus_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4638 "configure"
+#line 4988 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
prstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:4645: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4995: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_prstatus_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_prstatus_t" 1>&6
echo $ac_n "checking for prstatus_t.pr_who in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4667: checking for prstatus_t.pr_who in sys/procfs.h" >&5
+echo "configure:5017: checking for prstatus_t.pr_who in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4672 "configure"
+#line 5022 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
prstatus_t avar; void* aref = (void*) &avar.pr_who
; return 0; }
EOF
-if { (eval echo configure:4679: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5029: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who" 1>&6
echo $ac_n "checking for pstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4701: checking for pstatus_t in sys/procfs.h" >&5
+echo "configure:5051: checking for pstatus_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_pstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4706 "configure"
+#line 5056 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
pstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:4713: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5063: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_pstatus_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_pstatus_t" 1>&6
echo $ac_n "checking for prpsinfo_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4735: checking for prpsinfo_t in sys/procfs.h" >&5
+echo "configure:5085: checking for prpsinfo_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prpsinfo_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4740 "configure"
+#line 5090 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
prpsinfo_t avar
; return 0; }
EOF
-if { (eval echo configure:4747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5097: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_prpsinfo_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_prpsinfo_t" 1>&6
echo $ac_n "checking for psinfo_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4769: checking for psinfo_t in sys/procfs.h" >&5
+echo "configure:5119: checking for psinfo_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_psinfo_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4774 "configure"
+#line 5124 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
psinfo_t avar
; return 0; }
EOF
-if { (eval echo configure:4781: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5131: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_psinfo_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_psinfo_t" 1>&6
echo $ac_n "checking for lwpstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4803: checking for lwpstatus_t in sys/procfs.h" >&5
+echo "configure:5153: checking for lwpstatus_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_lwpstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4808 "configure"
+#line 5158 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
lwpstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:4815: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5165: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_lwpstatus_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_lwpstatus_t" 1>&6
echo $ac_n "checking for lwpstatus_t.pr_context in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4837: checking for lwpstatus_t.pr_context in sys/procfs.h" >&5
+echo "configure:5187: checking for lwpstatus_t.pr_context in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4842 "configure"
+#line 5192 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
lwpstatus_t avar; void* aref = (void*) &avar.pr_context
; return 0; }
EOF
-if { (eval echo configure:4849: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5199: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context" 1>&6
echo $ac_n "checking for lwpstatus_t.pr_reg in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4871: checking for lwpstatus_t.pr_reg in sys/procfs.h" >&5
+echo "configure:5221: checking for lwpstatus_t.pr_reg in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4876 "configure"
+#line 5226 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
lwpstatus_t avar; void* aref = (void*) &avar.pr_reg
; return 0; }
EOF
-if { (eval echo configure:4883: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5233: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg=yes
else
bfd_elf32_hppa_vec) tb="$tb elf32-hppa.lo elf32.lo $elf" ;;
bfd_elf32_i386_vec) tb="$tb elf32-i386.lo elf32.lo $elf" ;;
bfd_elf32_i860_vec) tb="$tb elf32-i860.lo elf32.lo $elf" ;;
+ bfd_elf32_i960_vec) tb="$tb elf32-i960.lo elf32.lo $elf" ;;
bfd_elf32_little_generic_vec) tb="$tb elf32-gen.lo elf32.lo $elf" ;;
bfd_elf32_littlemips_vec) tb="$tb elf32-mips.lo elf32.lo $elf ecofflink.lo" ;;
bfd_elf64_littlemips_vec) tb="$tb elf64-mips.lo elf64.lo elf32-mips.lo elf32.lo $elf ecofflink.lo"
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5239: checking for $ac_hdr" >&5
+echo "configure:5583: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5244 "configure"
+#line 5588 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5249: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5593: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5278: checking for $ac_func" >&5
+echo "configure:5622: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5283 "configure"
+#line 5627 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5306: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:5331: checking for working mmap" >&5
+echo "configure:5675: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 5339 "configure"
+#line 5683 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:5479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5823: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
for ac_func in madvise mprotect
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5504: checking for $ac_func" >&5
+echo "configure:5848: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5509 "configure"
+#line 5853 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5532: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
s%@RANLIB@%$RANLIB%g
s%@LD@%$LD%g
s%@NM@%$NM%g
+s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g
s%@LN_S@%$LN_S%g
-s%@LIBTOOL@%$LIBTOOL%g
s%@DLLTOOL@%$DLLTOOL%g
s%@AS@%$AS%g
+s%@LIBTOOL@%$LIBTOOL%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
projects / binutils-gdb.git / commitdiff