Fix tests/opt/opt_rmdff

This only passed before because "prep" was also running opt_rmdff

Signed-off-by: Claire Wolf <claire@symbioticeda.com>

diff --git a/tests/opt/opt_rmdff.v b/tests/opt/opt_rmdff.v
index b1c06703c86e617a6462eabf1ff822d02f1aaf26..536bf1d4e555df552df969532ce67893a88a8494 100644 (file)
--- a/tests/opt/opt_rmdff.v
+++ b/tests/opt/opt_rmdff.v
@@ -1,50 +1,50 @@
 module opt_rmdff_test (input C, input D, input E, output [29:0] Q);
 \$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove0 (.CLK(C), .D(D), .EN(1'b0), .Q(Q[0])); // EN is never active
-(* init = "1'b1" *) wire Q1; assign Q[1] = Q1;
+(* init = 1'b1 *) wire Q1; assign Q[1] = Q1;
 \$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove1 (.CLK(C), .D(D), .EN(1'b0), .Q(Q1)); // EN is never active
 \$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove2 (.CLK(C), .D(D), .EN(1'bx), .Q(Q[2])); // EN is don't care
 \$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) keep3 (.CLK(C), .D(D), .EN(1'b1), .Q(Q[3])); // EN is always active
-(* init = "1'b0" *) wire Q4; assign Q[4] = Q4;
+(* init = 1'b0 *) wire Q4; assign Q[4] = Q4;
 \$dffe #(.WIDTH(1), .CLK_POLARITY(0), .EN_POLARITY(1)) keep4 (.CLK(C), .D(D), .EN(1'b1), .Q(Q4)); // EN is always active
 \$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) remove5 (.CLK(C), .D(D), .EN(1'b1), .Q(Q[5])); // EN is never active
 \$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) remove6 (.CLK(C), .D(D), .EN(1'bx), .Q(Q[6])); // EN is don't care
-(* init = "1'b0" *) wire Q7; assign Q[7] = Q7;
+(* init = 1'b0 *) wire Q7; assign Q[7] = Q7;
 \$dffe #(.WIDTH(1), .CLK_POLARITY(0), .EN_POLARITY(0)) keep7 (.CLK(C), .D(D), .EN(E), .Q(Q7)); // EN is non constant
 
 \$_DFFE_PP_ remove8 (.C(C), .D(D), .E(1'b0), .Q(Q[8])); // EN is never active
-(* init = "1'b1" *) wire Q9; assign Q[9] = Q9;
+(* init = 1'b1 *) wire Q9; assign Q[9] = Q9;
 \$_DFFE_PP_ remove9 (.C(C), .D(D), .E(1'b0), .Q(Q9)); // EN is never active
 \$_DFFE_PP_ remove10 (.C(C), .D(D), .E(1'bx), .Q(Q[10])); // EN is don't care
 \$_DFFE_PP_ keep11 (.C(C), .D(D), .E(1'b1), .Q(Q[11])); // EN is always active
-(* init = "1'b0" *) wire Q12; assign Q[12] = Q12;
+(* init = 1'b0 *) wire Q12; assign Q[12] = Q12;
 \$_DFFE_PP_ keep12 (.C(C), .D(D), .E(1'b1), .Q(Q12)); // EN is always active
 
 \$_DFFE_NN_ remove13 (.C(C), .D(D), .E(1'b1), .Q(Q[13])); // EN is never active
-(* init = "1'b1" *) wire Q14; assign Q[14] = Q14;
+(* init = 1'b1 *) wire Q14; assign Q[14] = Q14;
 \$_DFFE_NN_ remove14 (.C(C), .D(D), .E(1'b1), .Q(Q14)); // EN is never active
 \$_DFFE_NN_ remove15 (.C(C), .D(D), .E(1'bx), .Q(Q[15])); // EN is don't care
 \$_DFFE_NN_ keep16 (.C(C), .D(D), .E(1'b0), .Q(Q[16])); // EN is always active
-(* init = "1'b0" *) wire Q17; assign Q[17] = Q17;
+(* init = 1'b0 *) wire Q17; assign Q[17] = Q17;
 \$_DFFE_NN_ keep17 (.C(C), .D(D), .E(1'b0), .Q(Q17)); // EN is always active
 
 \$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove18 (.CLK(1'b0), .D(D), .EN(E), .Q(Q[18])); // CLK is constant
-(* init = "1'b1" *) wire Q19; assign Q[19] = Q19;
+(* init = 1'b1 *) wire Q19; assign Q[19] = Q19;
 \$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove19 (.CLK(1'b1), .D(D), .EN(E), .Q(Q19)); // CLK is constant
 \$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove20 (.CLK(C), .D(1'bx), .EN(E), .Q(Q[20])); // D is undriven, Q has no initial value
-(* init = "1'b0" *) wire Q21; assign Q[21] = Q21;
+(* init = 1'b0 *) wire Q21; assign Q[21] = Q21;
 \$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) keep21 (.CLK(C), .D(1'bx), .EN(E), .Q(Q21)); // D is undriven, Q has initial value
 //\$dffe #(.WIDTH(1), .CLK_POLARITY(0), .EN_POLARITY(1)) remove22 (.CLK(C), .D(1'b0), .EN(1'b1), .Q(Q[22])); // D is constant, no initial Q value, EN is always active
 //                                                                                                           // (TODO, Q starts with 1'bx and becomes 1'b0)
-(* init = "1'b0" *) wire Q23; assign Q[23] = Q23;
+(* init = 1'b0 *) wire Q23; assign Q[23] = Q23;
 \$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) noenable23 (.CLK(C), .D(1'b0), .EN(1'b1), .Q(Q23)); // D is constant, initial Q value same as D, EN is always active
-(* init = "1'b1" *) wire Q24; assign Q[24] = Q24;
+(* init = 1'b1 *) wire Q24; assign Q[24] = Q24;
 \$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) keep24 (.CLK(C), .D(1'b0), .EN(1'b0), .Q(Q24)); // D is constant, initial Q value NOT same as D, EN is always active
-(* init = "1'b1" *) wire Q25; assign Q[25] = Q25;
+(* init = 1'b1 *) wire Q25; assign Q[25] = Q25;
 \$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) remove25 (.CLK(C), .D(1'b0), .EN(1'b1), .Q(Q25)); // D is constant, EN is never active
 \$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) remove26 (.CLK(C), .D(Q[26]), .EN(1'b1), .Q(Q[26])); // D is Q, EN is always active
 \$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) remove27 (.CLK(C), .D(Q[27]), .EN(1'b1), .Q(Q[27])); // D is Q, EN is never active, but no initial value
 \$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(0)) remove28 (.CLK(C), .D(Q[28]), .EN(E), .Q(Q[28])); // EN is nonconst, but no initial value
-(* init = "1'b1" *) wire Q29; assign Q[29] = Q29;
+(* init = 1'b1 *) wire Q29; assign Q[29] = Q29;
 \$dffe #(.WIDTH(1), .CLK_POLARITY(1), .EN_POLARITY(1)) keep29 (.CLK(C), .D(Q[29]), .EN(1'b1), .Q(Q29)); // EN is always active, but with initial value
 
 endmodule

diff --git a/tests/opt/opt_rmdff.ys b/tests/opt/opt_rmdff.ys
index 83a162f44d3d7fac419cd8f1ab0fd93950101c6e..7e11bc73f88ab56a15c9fa9c7e8e2fa43f118a67 100644 (file)
--- a/tests/opt/opt_rmdff.ys
+++ b/tests/opt/opt_rmdff.ys
@@ -1,6 +1,7 @@
 read_verilog -icells opt_rmdff.v
 prep
 design -stash gold
+
 read_verilog -icells opt_rmdff.v
 proc
 opt_rmdff
@@ -14,13 +15,19 @@ design -stash gate
 design -import gold -as gold
 design -import gate -as gate
 
-equiv_make gold gate equiv
-hierarchy -top equiv
-equiv_simple -undef
-equiv_status -assert
+cd gold
+# fix up the "EN is don't care" cases, so that the gold output can't
+# become defined by using the properties of an undefined enable. (Both
+# remove6 and remove15 have active-low enables.)
+connect -port remove6 EN 1'b1
+connect -port remove15 E 1'b1
+cd ..
+
+dff2dffe -unmap
+clk2fflogic
+opt_clean
+
+miter -equiv -ignore_gold_x -make_assert -make_outputs -make_outcmp -flatten gold gate miter
+hierarchy -top miter
 
-#design -load gold
-#stat
-#
-#design -load gate
-#stat
+sat -verify -prove-asserts -enable_undef -set-init-undef -seq 10 -show-public miter