* op50-rom.c, w89k-rom.c, monitor.c: Modify to use two variables

	to set remote load type and protocol.
	* rom68k-rom.c: Add to_stop in target_ops.

diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 83988acd305f43c2c6bb9a4af3ad75ca21012817..c39a47b6c13b560dad4e6a7f8d15c1156f688c6e 100644 (file)
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,9 @@
+Tue Nov 15 01:03:56 1994  Rob Savoye  (rob@slipknot.cygnus.com)
+
+       * op50-rom.c, w89k-rom.c, monitor.c: Modify to usr two variables
+       to set remote load type and protocol.
+       * rom68k-rom.c: Add to_stop in target_ops.
+
 Mon Nov 14 08:51:29 1994  Stu Grossman  (grossman@cygnus.com)
 
        * Makefile.in:  Install gdbtk.tcl.

diff --git a/gdb/monitor.c b/gdb/monitor.c
index 0eaf2938b3f368c7fbc8955359b7bc4c931ed810..f4139b90171254641f32e62386bcd5e1f9712064 100644 (file)
--- a/gdb/monitor.c
+++ b/gdb/monitor.c
@@ -77,7 +77,9 @@ static serial_t monitor_desc = NULL;
 /* sets the download protocol, choices are srec, generic, boot */
 char *loadtype;
 static char *loadtype_str;
+static char *loadproto_str;
 static void set_loadtype_command();
+static void set_loadproto_command();
 static void monitor_load_srec();
 static int monitor_write_srec();
 
@@ -127,6 +129,38 @@ set_loadtype_command (ignore, from_tty, c)
   free (tmp);
   error ("Loadtype \"%s\" does not exist.", (*(char **) c->var));
 }
+/*
+ * set_loadproto_command -- set the protocol for downloading. Check to make
+ *     sure you have a supported protocol for this target.
+ */
+static void
+set_loadproto_command (ignore, from_tty, c)
+     char *ignore;
+     int from_tty;
+     struct cmd_list_element *c;
+{
+  char *tmp;
+  char *type;
+  if (STREQ (LOADPROTOS, "")) {
+    error ("No load protocols set");
+    return;
+  }
+  
+  tmp = savestring (LOADPROTOS, strlen(LOADPROTOS));
+  type = strtok(tmp, ",");
+  if (STREQ (type, (*(char **) c->var))) {
+      loadproto_str = savestring (*(char **) c->var, strlen (*(char **) c->var));
+      return;
+    }
+  
+  while ((type = strtok (NULL, ",")) != (char *)NULL) {
+    if (STREQ (type, (*(char **) c->var)))
+      loadproto_str = savestring (*(char **) c->var, strlen (*(char **) c->var));
+    return;
+  }
+  free (tmp);
+  error ("Load protocol \"%s\" does not exist.", (*(char **) c->var));
+}
 
 /*
  * printf_monitor -- send data to monitor.  Works just like printf.
@@ -642,7 +676,7 @@ get_reg_name (regno)
   static char buf[50];
   const char *p;
   char *b;
-
+ 
   b = buf;
 
   if (regno < 0)
@@ -1253,7 +1287,7 @@ getacknak (byte)
   i = 0;
   while (i++ < 60) {
     character = (char)readchar (0);
-    if (character == 0xfffffffe) {             /* empty uart */
+    if ((character == 0xfffffffe) || (character == 0x7f)) {            /* empty uart */
       if (sr_get_debug() > 3)
        putchar ('.');
       fflush (stdout);
@@ -1474,11 +1508,18 @@ _initialize_remote_monitors ()
   struct cmd_list_element *c;
 
   /* this sets the type of download protocol */
-  c = add_set_cmd ("loadtype", no_class, var_string, (char *)&loadtype_str,
+  c = add_set_cmd ("remoteloadprotocol", no_class, var_string, (char *)&loadproto_str,
+       "Set the type of the remote load protocol.\n", &setlist);
+  c->function.sfunc =  set_loadproto_command;
+  add_show_from_set (c, &showlist);
+  loadproto_str = savestring ("none", 5);
+
+  /* this sets the conversion type when loading */
+  c = add_set_cmd ("remoteloadtype", no_class, var_string, (char *)&loadtype_str,
        "Set the type of the remote load protocol.\n", &setlist);
   c->function.sfunc =  set_loadtype_command;
   add_show_from_set (c, &showlist);
-  loadtype_str = savestring ("default", 8);
+  loadtype_str = savestring ("srec", 5);
 
   add_show_from_set (add_set_cmd ("hash", no_class, var_boolean,
                                   (char *)&hashmark,

diff --git a/gdb/monitor.h b/gdb/monitor.h
index 6e3758f358f36f88890388669f29b2e30b80eba6..f3aff8cb4661274866f6801dc46745be71d54521 100644 (file)
--- a/gdb/monitor.h
+++ b/gdb/monitor.h
@@ -47,6 +47,7 @@ struct monitor_ops {
   char *cmd_end;               /* optional command terminator */
   struct target_ops *target;   /* target operations */
   char *loadtypes;             /* the load types that are supported */
+  char *loadprotos;            /* the load protocols that are supported */
   char  **regnames;            /* array of register names in ascii */
 };
 
@@ -54,6 +55,7 @@ extern struct monitor_ops        *current_monitor;
 
 #define PROTO_TYPE             (current_monitor->type)
 #define LOADTYPES              (current_monitor->loadtypes)
+#define LOADPROTOS             (current_monitor->loadprotos)
 #define INIT_CMD               (current_monitor->init)
 #define GO_CMD                         (current_monitor->execute)
 #define CONT_CMD               (current_monitor->resume)

diff --git a/gdb/op50-rom.c b/gdb/op50-rom.c
index fe58e71373ef5176536fc35617b515835efdad9c..9e7a63c65db4bcb98b8308a1e4a585f15bc31d29 100644 (file)
--- a/gdb/op50-rom.c
+++ b/gdb/op50-rom.c
@@ -65,9 +65,8 @@ struct target_ops op50n_ops = {
   "Debug on a Oki OP50N eval board.\n\
 Specify the serial device it is connected to (e.g. /dev/ttya).",
   op50n_open,
-
   monitor_close, 
-  0,
+  monitor_attach,
   monitor_detach,
   monitor_resume,
   monitor_wait,
@@ -137,7 +136,8 @@ struct monitor_ops op50n_cmds = {
   " ",                                 /* end-of-command delimitor */
   ".\n",                               /* optional command terminator */
   &op50n_ops,                          /* target operations */
-  "srec,ascii-srec,default",           /* load types */
+  "none,srec,default",                 /* load types */
+  "none",                              /* load types */
   op50n_regnames
 };
 

diff --git a/gdb/rom68k-rom.c b/gdb/rom68k-rom.c
index 5b87fed5cbd87a3dc16c86c384e3e5dac6a18321..57398fd65a65dd1a7307b1159ebb7f338d02d6b5 100644 (file)
--- a/gdb/rom68k-rom.c
+++ b/gdb/rom68k-rom.c
@@ -89,6 +89,7 @@ Specify the serial device it is connected to (e.g. /dev/ttya).",
   monitor_mourn_inferior,
   0,                           /* can_run */
   0,                           /* notice_signals */
+  0,                            /* to_stop */
   process_stratum,
   0,                           /* next */
   1,
@@ -98,7 +99,7 @@ Specify the serial device it is connected to (e.g. /dev/ttya).",
   1,                           /* all mem, mem, stack, regs, exec */
   0,
   0,                           /* Section pointers */
-  OPS_MAGIC,                   /* Always the last thing */
+  OPS_MAGIC                    /* Always the last thing */
 };
 
 struct monitor_ops rom68k_cmds = {
@@ -135,7 +136,8 @@ struct monitor_ops rom68k_cmds = {
   "=",                                 /* end-of-command delimitor */
   ".\n",                               /* optional command terminator */
   &rom68k_ops,                         /* target operations */
-  "srec,xmodem-ascii,xmodem-srec,default",/* load types */
+  "none,srec,default",                 /* load types */
+  "none",                              /* load protocols */
   rom68k_regnames                      /* registers names */
 };
 
@@ -158,7 +160,3 @@ _initialize_rom68k ()
   /* this is the default, since it's the only baud rate supported by the hardware */
   baud_rate = 9600;
 }
-
-
-
-

diff --git a/gdb/w89k-rom.c b/gdb/w89k-rom.c
index a484f0228b1812f3d3b6ac27e7c71c2104469f90..2afe37f9a2b7f2cdfff5db0370e2c37fe8a15cfb 100644 (file)
--- a/gdb/w89k-rom.c
+++ b/gdb/w89k-rom.c
@@ -1,7 +1,6 @@
 /* Remote target glue for the WinBond ROM monitor running on the "Cougar"
 W89k eval board.
 
-
    Copyright 1988, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
 
 This file is part of GDB.
@@ -137,7 +136,8 @@ struct monitor_ops w89k_cmds = {
   "",                                  /* end-of-command delimitor */
   "",                                  /* optional command terminator */
   &w89k_ops,                           /* target operations */
-  "srec,xmodem-ascii,xmodem-srec,default",/* load types */
+  "none,srec,default",                 /* load types */
+  "none,xmodem",                       /* load protocols */
   w89k_regnames                                /* registers names */
 };
 
@@ -160,7 +160,3 @@ _initialize_w89k ()
   /* this is the default, since it's the only baud rate supported by the hardware */
   baud_rate = 9600;
 }
-
-
-
-