-2005-02-09 Corinna Vinschen <vinschen@redhat.com>
-
- * symmisc.c: Include gdb_stat.h.
- (maintenance_print_msymbols): Use inode numbers to compare files.
-
2005-02-09 Andrew Cagney <cagney@gnu.org>
+ * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call)
+ (convert_code_addr_to_desc_addr): Convert any function code
+ address to the corresponding function's descriptor.
+ (ppc64_sysv_abi_return_value): have TYPE_CODE_ENUM and
+ TYPE_CODE_INT use the same code paths as TYPE_CODE_INT. When
+ writing, convert any function code address to the corresponding
+ descriptor.
+
* config/sh/linux.mt (TDEPFILES): Add symfile-mem.o.
* config/powerpc/linux.mt (TDEPFILES): Ditto.
* config/pa/linux.mt (TDEPFILES): Ditto.
* config/ia64/linux.mt (TDEPFILES): Ditto.
* config/arm/linux.mt (TDEPFILES): Ditto.
+2005-02-09 Corinna Vinschen <vinschen@redhat.com>
+
+ * symmisc.c: Include gdb_stat.h.
+ (maintenance_print_msymbols): Use inode numbers to compare files.
+
2005-02-08 Andrew Cagney <cagney@gnu.org>
* value.h (METHOD_PTR_IS_VIRTUAL, METHOD_PTR_FROM_VOFFSET)
writebuf, 1);
}
+/* The helper function for 64-bit SYSV push_dummy_call. Converts the
+ function's code address back into the function's descriptor
+ address.
+
+ Find a value for the TOC register. Every symbol should have both
+ ".FN" and "FN" in the minimal symbol table. "FN" points at the
+ FN's descriptor, while ".FN" points at the entry point (which
+ matches FUNC_ADDR). Need to reverse from FUNC_ADDR back to the
+ FN's descriptor address (while at the same time being careful to
+ find "FN" in the same object file as ".FN"). */
+
+static int
+convert_code_addr_to_desc_addr (CORE_ADDR code_addr, CORE_ADDR *desc_addr)
+{
+ struct obj_section *dot_fn_section;
+ struct minimal_symbol *dot_fn;
+ struct minimal_symbol *fn;
+ CORE_ADDR toc;
+ /* Find the minimal symbol that corresponds to CODE_ADDR (should
+ have a name of the form ".FN"). */
+ dot_fn = lookup_minimal_symbol_by_pc (code_addr);
+ if (dot_fn == NULL || SYMBOL_LINKAGE_NAME (dot_fn)[0] != '.')
+ return 0;
+ /* Get the section that contains CODE_ADDR. Need this for the
+ "objfile" that it contains. */
+ dot_fn_section = find_pc_section (code_addr);
+ if (dot_fn_section == NULL || dot_fn_section->objfile == NULL)
+ return 0;
+ /* Now find the corresponding "FN" (dropping ".") minimal symbol's
+ address. Only look for the minimal symbol in ".FN"'s object file
+ - avoids problems when two object files (i.e., shared libraries)
+ contain a minimal symbol with the same name. */
+ fn = lookup_minimal_symbol (SYMBOL_LINKAGE_NAME (dot_fn) + 1, NULL,
+ dot_fn_section->objfile);
+ if (fn == NULL)
+ return 0;
+ /* Found a descriptor. */
+ (*desc_addr) = SYMBOL_VALUE_ADDRESS (fn);
+ return 1;
+}
+
/* Pass the arguments in either registers, or in the stack. Using the
ppc 64 bit SysV ABI.
}
}
else if ((TYPE_CODE (type) == TYPE_CODE_INT
- || TYPE_CODE (type) == TYPE_CODE_ENUM)
+ || TYPE_CODE (type) == TYPE_CODE_ENUM
+ || TYPE_CODE (type) == TYPE_CODE_PTR)
&& TYPE_LENGTH (type) <= 8)
{
- /* Scalars get sign[un]extended and go in gpr3 .. gpr10.
- They can also end up in memory. */
+ /* Scalars and Pointers get sign[un]extended and go in
+ gpr3 .. gpr10. They can also end up in memory. */
if (write_pass)
{
/* Sign extend the value, then store it unsigned. */
ULONGEST word = unpack_long (type, val);
+ /* Convert any function code addresses into
+ descriptors. */
+ if (TYPE_CODE (type) == TYPE_CODE_PTR
+ && TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_FUNC)
+ {
+ CORE_ADDR desc = word;
+ convert_code_addr_to_desc_addr (word, &desc);
+ word = desc;
+ }
if (greg <= 10)
regcache_cooked_write_unsigned (regcache,
tdep->ppc_gp0_regnum +
value to memory. Fortunately, doing this
simplifies the code. */
write_memory (gparam, val, TYPE_LENGTH (type));
+ if (write_pass)
+ /* WARNING: cagney/2004-06-20: It appears that GCC
+ likes to put structures containing a single
+ floating-point member in an FP register instead of
+ general general purpose. */
/* Always consume parameter stack space. */
gparam = align_up (gparam + TYPE_LENGTH (type), tdep->wordsize);
}
breakpoint. */
regcache_cooked_write_signed (regcache, tdep->ppc_lr_regnum, bp_addr);
- /* Find a value for the TOC register. Every symbol should have both
- ".FN" and "FN" in the minimal symbol table. "FN" points at the
- FN's descriptor, while ".FN" points at the entry point (which
- matches FUNC_ADDR). Need to reverse from FUNC_ADDR back to the
- FN's descriptor address (while at the same time being careful to
- find "FN" in the same object file as ".FN"). */
+ /* Use the func_addr to find the descriptor, and use that to find
+ the TOC. */
{
- /* Find the minimal symbol that corresponds to FUNC_ADDR (should
- have the name ".FN"). */
- struct minimal_symbol *dot_fn = lookup_minimal_symbol_by_pc (func_addr);
- if (dot_fn != NULL && SYMBOL_LINKAGE_NAME (dot_fn)[0] == '.')
+ CORE_ADDR desc_addr;
+ if (convert_code_addr_to_desc_addr (func_addr, &desc_addr))
{
- /* Get the section that contains FUNC_ADR. Need this for the
- "objfile" that it contains. */
- struct obj_section *dot_fn_section = find_pc_section (func_addr);
- if (dot_fn_section != NULL && dot_fn_section->objfile != NULL)
- {
- /* Now find the corresponding "FN" (dropping ".") minimal
- symbol's address. Only look for the minimal symbol in
- ".FN"'s object file - avoids problems when two object
- files (i.e., shared libraries) contain a minimal symbol
- with the same name. */
- struct minimal_symbol *fn =
- lookup_minimal_symbol (SYMBOL_LINKAGE_NAME (dot_fn) + 1, NULL,
- dot_fn_section->objfile);
- if (fn != NULL)
- {
- /* Got the address of that descriptor. The TOC is the
- second double word. */
- CORE_ADDR toc =
- read_memory_unsigned_integer (SYMBOL_VALUE_ADDRESS (fn)
- + tdep->wordsize,
- tdep->wordsize);
- regcache_cooked_write_unsigned (regcache,
- tdep->ppc_gp0_regnum + 2, toc);
- }
- }
+ /* The TOC is the second double word in the descriptor. */
+ CORE_ADDR toc =
+ read_memory_unsigned_integer (desc_addr + tdep->wordsize,
+ tdep->wordsize);
+ regcache_cooked_write_unsigned (regcache,
+ tdep->ppc_gp0_regnum + 2, toc);
}
}
}
return RETURN_VALUE_REGISTER_CONVENTION;
}
- if (TYPE_CODE (valtype) == TYPE_CODE_INT && TYPE_LENGTH (valtype) <= 8)
+ if ((TYPE_CODE (valtype) == TYPE_CODE_INT
+ || TYPE_CODE (valtype) == TYPE_CODE_ENUM)
+ && TYPE_LENGTH (valtype) <= 8)
{
/* Integers in r3. */
if (writebuf != NULL)
projects / binutils-gdb.git / commitdiff