+2014-06-18 Gary Benson <gbenson@redhat.com>
+
+ * nat/i386-dregs.h: New file.
+ * Makefile.in (HFILES_NO_SRCDIR): Add the above.
+ * i386-nat.h (i386-dregs.h): New include.
+ (DR_FIRSTADDR): Now in i386-dregs.h.
+ (DR_LASTADDR): Likewise.
+ (DR_NADDR): Likewise.
+ (DR_STATUS): Likewise.
+ (DR_CONTROL): Likewise.
+ (i386_debug_reg_state): Likewise.
+ * i386-nat.c (ALL_DEBUG_REGISTERS): Likewise.
+
2014-06-18 Don Breazeal <donb@codesourcery.com>
* breakpoint.c (set_longjmp_breakpoint): Call
gdb_bfd.h sparc-ravenscar-thread.h ppc-ravenscar-thread.h common/linux-btrace.h \
ctf.h common/i386-cpuid.h common/i386-gcc-cpuid.h target/resume.h \
target/wait.h target/waitstatus.h nat/linux-nat.h nat/linux-waitpid.h \
-common/print-utils.h common/rsp-low.h
+common/print-utils.h common/rsp-low.h nat/i386-dregs.h
# Header files that already have srcdir in them, or which are in objdir.
+2014-06-18 Gary Benson <gbenson@redhat.com>
+
+ * i386-low.h (i386-dregs.h): New include.
+ (DR_FIRSTADDR): Now in i386-dregs.h.
+ (DR_LASTADDR): Likewise.
+ (DR_NADDR): Likewise.
+ (DR_STATUS): Likewise.
+ (DR_CONTROL): Likewise.
+ (i386_debug_reg_state): Likewise.
+ (i386_dr_insert_watchpoint): Likewise.
+ (i386_dr_remove_watchpoint): Likewise.
+ (i386_dr_region_ok_for_watchpoint): Likewise.
+ (i386_dr_stopped_data_address): Likewise.
+ (i386_dr_stopped_by_watchpoint): Likewise.
+ * i386-low.c (ALL_DEBUG_REGISTERS): Likewise.
+
2014-06-18 Gary Benson <gbenson@redhat.com>
* i386-low.h (i386_low_insert_watchpoint): Renamed to
/* Did the watchpoint whose address is in the I'th register break? */
#define I386_DR_WATCH_HIT(dr6, i) ((dr6) & (1 << (i)))
-/* A macro to loop over all debug registers. */
-#define ALL_DEBUG_REGISTERS(i) for (i = 0; i < DR_NADDR; i++)
-
/* Types of operations supported by i386_handle_nonaligned_watchpoint. */
typedef enum { WP_INSERT, WP_REMOVE, WP_COUNT } i386_wp_op_t;
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
-/* Support for hardware watchpoints and breakpoints using the i386
- debug registers.
-
- This provides several functions for inserting and removing
- hardware-assisted breakpoints and watchpoints, testing if one or
- more of the watchpoints triggered and at what address, checking
- whether a given region can be watched, etc.
-
- The functions below implement debug registers sharing by reference
- counts, and allow to watch regions up to 16 bytes long
- (32 bytes on 64 bit hosts). */
-
-/* Debug registers' indices. */
-#define DR_FIRSTADDR 0
-#define DR_LASTADDR 3
-#define DR_NADDR 4 /* The number of debug address registers. */
-#define DR_STATUS 6 /* Index of debug status register (DR6). */
-#define DR_CONTROL 7 /* Index of debug control register (DR7). */
-
-/* Global state needed to track h/w watchpoints. */
-
-struct i386_debug_reg_state
-{
- /* Mirror the inferior's DRi registers. We keep the status and
- control registers separated because they don't hold addresses.
- Note that since we can change these mirrors while threads are
- running, we never trust them to explain a cause of a trap.
- For that, we need to peek directly in the inferior registers. */
- CORE_ADDR dr_mirror[DR_NADDR];
- unsigned dr_status_mirror, dr_control_mirror;
-
- /* Reference counts for each debug register. */
- int dr_ref_count[DR_NADDR];
-};
+
+#include "nat/i386-dregs.h"
/* Initialize STATE. */
extern void i386_low_init_dregs (struct i386_debug_reg_state *state);
-/* Insert a watchpoint to watch a memory region which starts at
- address ADDR and whose length is LEN bytes. Watch memory accesses
- of the type TYPE. Return 0 on success, -1 on failure. */
-extern int i386_dr_insert_watchpoint (struct i386_debug_reg_state *state,
- enum target_hw_bp_type type,
- CORE_ADDR addr,
- int len);
-
-/* Remove a watchpoint that watched the memory region which starts at
- address ADDR, whose length is LEN bytes, and for accesses of the
- type TYPE. Return 0 on success, -1 on failure. */
-extern int i386_dr_remove_watchpoint (struct i386_debug_reg_state *state,
- enum target_hw_bp_type type,
- CORE_ADDR addr,
- int len);
-
-/* Return non-zero if we can watch a memory region that starts at
- address ADDR and whose length is LEN bytes. */
-extern int i386_dr_region_ok_for_watchpoint (struct i386_debug_reg_state *state,
- CORE_ADDR addr, int len);
-
-/* If the inferior has some break/watchpoint that triggered, set the
- address associated with that break/watchpoint and return true.
- Otherwise, return false. */
-extern int i386_dr_stopped_data_address (struct i386_debug_reg_state *state,
- CORE_ADDR *addr_p);
-
-/* Return true if the inferior has some watchpoint that triggered.
- Otherwise return false. */
-extern int i386_dr_stopped_by_watchpoint (struct i386_debug_reg_state *state);
\f
/* Each target needs to provide several low-level functions
that will be called to insert watchpoints and hardware breakpoints
/* Did the watchpoint whose address is in the I'th register break? */
#define I386_DR_WATCH_HIT(dr6, i) ((dr6) & (1 << (i)))
-/* A macro to loop over all debug registers. */
-#define ALL_DEBUG_REGISTERS(i) for (i = 0; i < DR_NADDR; i++)
-
/* Per-process data. We don't bind this to a per-inferior registry
because of targets like x86 GNU/Linux that need to keep track of
processes that aren't bound to any inferior (e.g., fork children,
#ifndef I386_NAT_H
#define I386_NAT_H 1
+#include "nat/i386-dregs.h"
+
/* Hardware-assisted breakpoints and watchpoints. */
/* Add watchpoint methods to the provided target_ops.
/* Support for hardware watchpoints and breakpoints using the i386
debug registers.
- This provides several functions for inserting and removing
- hardware-assisted breakpoints and watchpoints, testing if one or
- more of the watchpoints triggered and at what address, checking
- whether a given region can be watched, etc.
-
- In addition, each target should provide several low-level functions
+ Each target should provide several low-level functions
regrouped into i386_dr_low_type struct below. These functions
that will be called to insert watchpoints and hardware breakpoints
into the inferior, remove them, and check their status. These
extern struct i386_dr_low_type i386_dr_low;
-/* Debug registers' indices. */
-#define DR_FIRSTADDR 0
-#define DR_LASTADDR 3
-#define DR_NADDR 4 /* The number of debug address registers. */
-#define DR_STATUS 6 /* Index of debug status register (DR6). */
-#define DR_CONTROL 7 /* Index of debug control register (DR7). */
-
-/* Global state needed to track h/w watchpoints. */
-
-struct i386_debug_reg_state
-{
- /* Mirror the inferior's DRi registers. We keep the status and
- control registers separated because they don't hold addresses.
- Note that since we can change these mirrors while threads are
- running, we never trust them to explain a cause of a trap.
- For that, we need to peek directly in the inferior registers. */
- CORE_ADDR dr_mirror[DR_NADDR];
- unsigned dr_status_mirror, dr_control_mirror;
-
- /* Reference counts for each debug register. */
- int dr_ref_count[DR_NADDR];
-};
-
/* Use this function to set i386_dr_low debug_register_length field
rather than setting it directly to check that the length is only
set once. It also enables the 'maint set/show show-debug-regs'
--- /dev/null
+/* Debug register code for the i386.
+
+ Copyright (C) 2009-2014 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+/* Support for hardware watchpoints and breakpoints using the i386
+ debug registers.
+
+ This provides several functions for inserting and removing
+ hardware-assisted breakpoints and watchpoints, testing if one or
+ more of the watchpoints triggered and at what address, checking
+ whether a given region can be watched, etc.
+
+ The functions below implement debug registers sharing by reference
+ counts, and allow to watch regions up to 16 bytes long
+ (32 bytes on 64 bit hosts). */
+
+#ifndef I386_DREGS_H
+#define I386_DREGS_H 1
+
+/* Forward declaration. */
+enum target_hw_bp_type;
+
+/* Debug registers' indices. */
+#define DR_FIRSTADDR 0
+#define DR_LASTADDR 3
+#define DR_NADDR 4 /* The number of debug address registers. */
+#define DR_STATUS 6 /* Index of debug status register (DR6). */
+#define DR_CONTROL 7 /* Index of debug control register (DR7). */
+
+/* Global state needed to track h/w watchpoints. */
+
+struct i386_debug_reg_state
+{
+ /* Mirror the inferior's DRi registers. We keep the status and
+ control registers separated because they don't hold addresses.
+ Note that since we can change these mirrors while threads are
+ running, we never trust them to explain a cause of a trap.
+ For that, we need to peek directly in the inferior registers. */
+ CORE_ADDR dr_mirror[DR_NADDR];
+ unsigned dr_status_mirror, dr_control_mirror;
+
+ /* Reference counts for each debug register. */
+ int dr_ref_count[DR_NADDR];
+};
+
+/* A macro to loop over all debug registers. */
+#define ALL_DEBUG_REGISTERS(i) for (i = 0; i < DR_NADDR; i++)
+\f
+/* High-level functions. */
+
+/* Insert a watchpoint to watch a memory region which starts at
+ address ADDR and whose length is LEN bytes. Watch memory accesses
+ of the type TYPE. Return 0 on success, -1 on failure. */
+extern int i386_dr_insert_watchpoint (struct i386_debug_reg_state *state,
+ enum target_hw_bp_type type,
+ CORE_ADDR addr,
+ int len);
+
+/* Remove a watchpoint that watched the memory region which starts at
+ address ADDR, whose length is LEN bytes, and for accesses of the
+ type TYPE. Return 0 on success, -1 on failure. */
+extern int i386_dr_remove_watchpoint (struct i386_debug_reg_state *state,
+ enum target_hw_bp_type type,
+ CORE_ADDR addr,
+ int len);
+
+/* Return non-zero if we can watch a memory region that starts at
+ address ADDR and whose length is LEN bytes. */
+extern int i386_dr_region_ok_for_watchpoint (struct i386_debug_reg_state *state,
+ CORE_ADDR addr, int len);
+
+/* If the inferior has some break/watchpoint that triggered, set the
+ address associated with that break/watchpoint and return true.
+ Otherwise, return false. */
+extern int i386_dr_stopped_data_address (struct i386_debug_reg_state *state,
+ CORE_ADDR *addr_p);
+
+/* Return true if the inferior has some watchpoint that triggered.
+ Otherwise return false. */
+extern int i386_dr_stopped_by_watchpoint (struct i386_debug_reg_state *state);
+\f
+/* Low-level functions. */
+
+/* Print the values of the mirrored debug registers. */
+
+extern void i386_dr_show (struct i386_debug_reg_state *state,
+ const char *func, CORE_ADDR addr,
+ int len, enum target_hw_bp_type type);
+
+/* Return the value of a 4-bit field for DR7 suitable for watching a
+ region of LEN bytes for accesses of type TYPE. LEN is assumed to
+ have the value of 1, 2, or 4. */
+
+extern unsigned i386_dr_length_and_rw_bits (int len,
+ enum target_hw_bp_type type);
+
+/* Insert a watchpoint at address ADDR, which is assumed to be aligned
+ according to the length of the region to watch. LEN_RW_BITS is the
+ value of the bits from DR7 which describes the length and access
+ type of the region to be watched by this watchpoint. Return 0 on
+ success, -1 on failure. */
+
+extern int i386_dr_insert_aligned_watchpoint (struct i386_debug_reg_state *state,
+ CORE_ADDR addr,
+ unsigned len_rw_bits);
+
+/* Remove a watchpoint at address ADDR, which is assumed to be aligned
+ according to the length of the region to watch. LEN_RW_BITS is the
+ value of the bits from DR7 which describes the length and access
+ type of the region watched by this watchpoint. Return 0 on
+ success, -1 on failure. */
+
+extern int i386_dr_remove_aligned_watchpoint (struct i386_debug_reg_state *state,
+ CORE_ADDR addr,
+ unsigned len_rw_bits);
+
+/* Update the inferior debug registers state, in STATE, with the
+ new debug registers state, in NEW_STATE. */
+
+extern void i386_dr_update_inferior_debug_regs (struct i386_debug_reg_state *state,
+ struct i386_debug_reg_state *new_state);
+
+#endif /* I386_DREGS_H */
projects / binutils-gdb.git / commitdiff