configs/qemu: bump to the latest linux version

ppc-mpc8544ds: switch to custom kernel config since the new 4.3-shipped
mpc85xx_basic_defconfig doesn't work with Qemu.
Incidentally while cleaning it up it now seems to work fine with newer
qemu versions.

sparc64_sun4u: ditch ne2k driver since it's useless, and add the e1000
driver which works fine.

x86: stick to 4.2.x kernels since 4.3 doesn't work right with uclibc
(any variant) based toolchains.

Results table:

Defconfig               Kernel          Qemu    Network Status
--------------------------------------------------------------
aarch64_virt            4.3             2.3.0   YES     OK
arm_nuri                3.10.93         2.3.0   NO(1)   OK(2)
arm_versatile           4.3             2.3.0   YES     OK
arm_vexpress            4.3             2.3.0   YES     OK
microblazebe            4.3             2.3.0   YES     OK
microblazeel            4.3             2.3.0   YES     OK
mips64el_malta          4.3             2.3.0   YES     OK
mips64_malta            4.3             2.3.0   YES     OK
mipsel_malta            4.3             2.3.0   YES     OK
mips_malta              4.3             2.3.0   YES     OK
ppc_g3beige             4.3             2.3.0   YES     OK
ppc_mpc8544ds           4.3             2.3.0   YES     OK
ppc_virtex_ml507        4.3             2.3.0   NO      OK
ppc64_pseries           4.3             2.3.0   YES     OK
sh4                     4.3             2.3.0   YES     OK
sh4eb                   4.3             2.3.0   NO(1)   OK
sparc_ss10              4.3             2.3.0   YES     OK
sparc64_sun4u           4.3             2.3.0   YES     OK
sparc_sun4u             4.3             2.3.0   YES     OK
x86                     4.2.6           2.3.0   YES     OK(3)
x86_64                  4.3             2.3.0   YES     OK
xtensa_lx60             4.3             2.3.0   YES     OK

(1) - Supposed to work but broken, probably Qemu emulation issue
(2) - In like 1/3 runs it fails to start properly
(3) - linux 4.3.0 doesn't like uclibc-based toolchains (net issues)

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

diff --git a/board/qemu/aarch64-virt/linux-4.2.config b/board/qemu/aarch64-virt/linux-4.2.config
deleted file mode 100644 (file)
index 93cb42f..0000000
--- a/board/qemu/aarch64-virt/linux-4.2.config
+++ /dev/null
@@ -1,56 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_TASKSTATS=y
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_BLK_DEV_BSGLIB=y
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_SMP=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_COMPAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_PACKET_DIAG=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_BRIDGE=m
-CONFIG_NET_SCHED=y
-CONFIG_VSOCKETS=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_ATA=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_MACVLAN=y
-CONFIG_VIRTIO_NET=y
-CONFIG_NLMON=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
-CONFIG_MAILBOX=y
-CONFIG_PL320_MBOX=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y

diff --git a/board/qemu/aarch64-virt/linux-4.3.config b/board/qemu/aarch64-virt/linux-4.3.config
new file mode 100644 (file)
index 0000000..93cb42f
--- /dev/null
+++ b/board/qemu/aarch64-virt/linux-4.3.config
@@ -0,0 +1,56 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_TASKSTATS=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_SMP=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_BINFMT_MISC=y
+CONFIG_COMPAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_BRIDGE=m
+CONFIG_NET_SCHED=y
+CONFIG_VSOCKETS=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_VIRTIO=y
+CONFIG_ATA=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+CONFIG_MACVLAN=y
+CONFIG_VIRTIO_NET=y
+CONFIG_NLMON=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_MAILBOX=y
+CONFIG_PL320_MBOX=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y

diff --git a/board/qemu/aarch64-virt/readme.txt b/board/qemu/aarch64-virt/readme.txt
index 097760c624f857f53a7e33b3182982800a31e648..d43fe09f75830390f5b036ae7eee329e127aaab6 100644 (file)
--- a/board/qemu/aarch64-virt/readme.txt
+++ b/board/qemu/aarch64-virt/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/arm-nuri/readme.txt b/board/qemu/arm-nuri/readme.txt
index d7a642828d8987b8462ac7872791f87535d1eee9..df07a5c3a29b25b5aff05e1f6826603c7f987e6b 100644 (file)
--- a/board/qemu/arm-nuri/readme.txt
+++ b/board/qemu/arm-nuri/readme.txt
@@ -8,4 +8,4 @@ graphical window is the framebuffer.
 Startup time is slow because of the SMP CPU emulation so be patient.
 This emulation is known to be flaky.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/arm-versatile/linux-4.2.config b/board/qemu/arm-versatile/linux-4.2.config
deleted file mode 100644 (file)
index 9a1ae58..0000000
--- a/board/qemu/arm-versatile/linux-4.2.config
+++ /dev/null
@@ -1,43 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_VERSATILE=y
-CONFIG_MACH_VERSATILE_AB=y
-CONFIG_PCI=y
-CONFIG_AEABI=y
-CONFIG_USE_OF=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_NETDEVICES=y
-CONFIG_8139CP=y
-CONFIG_PHYLIB=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_ARMAACI=m
-CONFIG_EXT4_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_MAGIC_SYSRQ=y

diff --git a/board/qemu/arm-versatile/linux-4.3.config b/board/qemu/arm-versatile/linux-4.3.config
new file mode 100644 (file)
index 0000000..9a1ae58
--- /dev/null
+++ b/board/qemu/arm-versatile/linux-4.3.config
@@ -0,0 +1,43 @@
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_ARCH_VERSATILE=y
+CONFIG_MACH_VERSATILE_AB=y
+CONFIG_PCI=y
+CONFIG_AEABI=y
+CONFIG_USE_OF=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_NETDEVICES=y
+CONFIG_8139CP=y
+CONFIG_PHYLIB=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_ARMAACI=m
+CONFIG_EXT4_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_MAGIC_SYSRQ=y

diff --git a/board/qemu/arm-versatile/readme.txt b/board/qemu/arm-versatile/readme.txt
index af65d05ec152a8c8e5c0e9d8a15d59efa5240f1a..1812994219b25f378b6d7794781e364f951a1e99 100644 (file)
--- a/board/qemu/arm-versatile/readme.txt
+++ b/board/qemu/arm-versatile/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/arm-vexpress/readme.txt b/board/qemu/arm-vexpress/readme.txt
index c8f24be12f7e9740c9872f1d007e0967cfcd0597..a3dc6e49991493c761dd55496bc8b9382756d670 100644 (file)
--- a/board/qemu/arm-vexpress/readme.txt
+++ b/board/qemu/arm-vexpress/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/microblazebe-mmu/linux-4.2.config b/board/qemu/microblazebe-mmu/linux-4.2.config
deleted file mode 100644 (file)
index 6b4ff22..0000000
--- a/board/qemu/microblazebe-mmu/linux-4.2.config
+++ /dev/null
@@ -1,19 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OPT_LIB_ASM=y
-CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
-CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
-CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
-CONFIG_MMU=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_NETDEVICES=y
-CONFIG_XILINX_EMACLITE=y
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set

diff --git a/board/qemu/microblazebe-mmu/linux-4.3.config b/board/qemu/microblazebe-mmu/linux-4.3.config
new file mode 100644 (file)
index 0000000..6b4ff22
--- /dev/null
+++ b/board/qemu/microblazebe-mmu/linux-4.3.config
@@ -0,0 +1,19 @@
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_OPT_LIB_ASM=y
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_MMU=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETDEVICES=y
+CONFIG_XILINX_EMACLITE=y
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_VGA_CONSOLE is not set

diff --git a/board/qemu/microblazebe-mmu/readme.txt b/board/qemu/microblazebe-mmu/readme.txt
index 9f93ab57dadd953ac300a2ca5c978772ef7097c7..9ade6fb3d72ad5eea1246ba0ed009d385af34065 100644 (file)
--- a/board/qemu/microblazebe-mmu/readme.txt
+++ b/board/qemu/microblazebe-mmu/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/microblazeel-mmu/linux-4.2.config b/board/qemu/microblazeel-mmu/linux-4.2.config
deleted file mode 100644 (file)
index c7d6b30..0000000
--- a/board/qemu/microblazeel-mmu/linux-4.2.config
+++ /dev/null
@@ -1,18 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
-CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
-CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
-CONFIG_MMU=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_NETDEVICES=y
-CONFIG_XILINX_EMACLITE=y
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set

diff --git a/board/qemu/microblazeel-mmu/linux-4.3.config b/board/qemu/microblazeel-mmu/linux-4.3.config
new file mode 100644 (file)
index 0000000..c7d6b30
--- /dev/null
+++ b/board/qemu/microblazeel-mmu/linux-4.3.config
@@ -0,0 +1,18 @@
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_MMU=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETDEVICES=y
+CONFIG_XILINX_EMACLITE=y
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_VGA_CONSOLE is not set

diff --git a/board/qemu/microblazeel-mmu/readme.txt b/board/qemu/microblazeel-mmu/readme.txt
index 230527da2421e913daa5abf93e39f204c6f3d73f..005ea63961c1ff82fe3f8d9fe99bef8215b2e35d 100644 (file)
--- a/board/qemu/microblazeel-mmu/readme.txt
+++ b/board/qemu/microblazeel-mmu/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/mips-malta/linux-4.2.config b/board/qemu/mips-malta/linux-4.2.config
deleted file mode 100644 (file)
index 3a26ac8..0000000
--- a/board/qemu/mips-malta/linux-4.2.config
+++ /dev/null
@@ -1,30 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y

diff --git a/board/qemu/mips-malta/linux-4.3.config b/board/qemu/mips-malta/linux-4.3.config
new file mode 100644 (file)
index 0000000..3a26ac8
--- /dev/null
+++ b/board/qemu/mips-malta/linux-4.3.config
@@ -0,0 +1,30 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y

diff --git a/board/qemu/mips-malta/readme.txt b/board/qemu/mips-malta/readme.txt
index 2c960597a81a8c34a83d86019de585c42034acce..96c952c669903ada2915fcf178fa5162b1950c1c 100644 (file)
--- a/board/qemu/mips-malta/readme.txt
+++ b/board/qemu/mips-malta/readme.txt
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/mips64-malta/linux-4.2.config b/board/qemu/mips64-malta/linux-4.2.config
deleted file mode 100644 (file)
index cd0b560..0000000
--- a/board/qemu/mips64-malta/linux-4.2.config
+++ /dev/null
@@ -1,34 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS64_R1=y
-CONFIG_64BIT=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_MIPS32_COMPAT=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y

diff --git a/board/qemu/mips64-malta/linux-4.3.config b/board/qemu/mips64-malta/linux-4.3.config
new file mode 100644 (file)
index 0000000..cd0b560
--- /dev/null
+++ b/board/qemu/mips64-malta/linux-4.3.config
@@ -0,0 +1,34 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS64_R1=y
+CONFIG_64BIT=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y

diff --git a/board/qemu/mips64-malta/readme.txt b/board/qemu/mips64-malta/readme.txt
index 80c9310e13a5ca92e56c4ba26e9dec4d5fe1ac62..9aa7aa1bbc92e4a348bf50b98cfd85003c685abd 100644 (file)
--- a/board/qemu/mips64-malta/readme.txt
+++ b/board/qemu/mips64-malta/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/mips64el-malta/linux-4.2.config b/board/qemu/mips64el-malta/linux-4.2.config
deleted file mode 100644 (file)
index c6b46d4..0000000
--- a/board/qemu/mips64el-malta/linux-4.2.config
+++ /dev/null
@@ -1,35 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS64_R1=y
-CONFIG_64BIT=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_MIPS32_COMPAT=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y

diff --git a/board/qemu/mips64el-malta/linux-4.3.config b/board/qemu/mips64el-malta/linux-4.3.config
new file mode 100644 (file)
index 0000000..c6b46d4
--- /dev/null
+++ b/board/qemu/mips64el-malta/linux-4.3.config
@@ -0,0 +1,35 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS64_R1=y
+CONFIG_64BIT=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y

diff --git a/board/qemu/mips64el-malta/readme.txt b/board/qemu/mips64el-malta/readme.txt
index 82ab88358f392b391f2e5c61f26178bb41c91d36..d6da29bcec3546145f80ac92293008139e607ca6 100644 (file)
--- a/board/qemu/mips64el-malta/readme.txt
+++ b/board/qemu/mips64el-malta/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/mipsel-malta/linux-4.2.config b/board/qemu/mipsel-malta/linux-4.2.config
deleted file mode 100644 (file)
index 79d7352..0000000
--- a/board/qemu/mipsel-malta/linux-4.2.config
+++ /dev/null
@@ -1,31 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y

diff --git a/board/qemu/mipsel-malta/linux-4.3.config b/board/qemu/mipsel-malta/linux-4.3.config
new file mode 100644 (file)
index 0000000..79d7352
--- /dev/null
+++ b/board/qemu/mipsel-malta/linux-4.3.config
@@ -0,0 +1,31 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y

diff --git a/board/qemu/mipsel-malta/readme.txt b/board/qemu/mipsel-malta/readme.txt
index a77eb88625ab964b982c71e43577eb2185aba639..7dbb50bb7fbc46a118ca4832045d682eb9b11123 100644 (file)
--- a/board/qemu/mipsel-malta/readme.txt
+++ b/board/qemu/mipsel-malta/readme.txt
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/ppc-g3beige/linux-4.2.config b/board/qemu/ppc-g3beige/linux-4.2.config
deleted file mode 100644 (file)
index 7994553..0000000
--- a/board/qemu/ppc-g3beige/linux-4.2.config
+++ /dev/null
@@ -1,25 +0,0 @@
-CONFIG_ALTIVEC=y
-CONFIG_SYSVIPC=y
-CONFIG_HIGHMEM=y
-CONFIG_YENTA=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_ADB=y
-CONFIG_ADB_CUDA=y
-CONFIG_ADB_PMU=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_8139CP=y
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_TTYS=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_BOOTX_TEXT=y

diff --git a/board/qemu/ppc-g3beige/linux-4.3.config b/board/qemu/ppc-g3beige/linux-4.3.config
new file mode 100644 (file)
index 0000000..7994553
--- /dev/null
+++ b/board/qemu/ppc-g3beige/linux-4.3.config
@@ -0,0 +1,25 @@
+CONFIG_ALTIVEC=y
+CONFIG_SYSVIPC=y
+CONFIG_HIGHMEM=y
+CONFIG_YENTA=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_ADB=y
+CONFIG_ADB_CUDA=y
+CONFIG_ADB_PMU=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_8139CP=y
+CONFIG_SERIAL_PMACZILOG=y
+CONFIG_SERIAL_PMACZILOG_TTYS=y
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_BOOTX_TEXT=y

diff --git a/board/qemu/ppc-g3beige/readme.txt b/board/qemu/ppc-g3beige/readme.txt
index cd358b3880b05bab026ed5e7e71b4d2bf7e36d24..fd19b687b37be2f1588b85f0ad698ed9c0dddf0c 100644 (file)
--- a/board/qemu/ppc-g3beige/readme.txt
+++ b/board/qemu/ppc-g3beige/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/ppc-mpc8544ds/linux-4.3.config b/board/qemu/ppc-mpc8544ds/linux-4.3.config
new file mode 100644 (file)
index 0000000..b36847c
--- /dev/null
+++ b/board/qemu/ppc-mpc8544ds/linux-4.3.config
@@ -0,0 +1,38 @@
+CONFIG_PPC_85xx=y
+CONFIG_PHYS_64BIT=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio"
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MPC8540_ADS=y
+CONFIG_MPC85xx_DS=y
+CONFIG_HIGHMEM=y
+CONFIG_MATH_EMULATION=y
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_TMPFS=y

diff --git a/board/qemu/ppc-mpc8544ds/readme.txt b/board/qemu/ppc-mpc8544ds/readme.txt
index 8a3374f0f01ce90077039eb8cb79713773aebcaa..0ade52ca759683729239c47e48cfc089847d39a4 100644 (file)
--- a/board/qemu/ppc-mpc8544ds/readme.txt
+++ b/board/qemu/ppc-mpc8544ds/readme.txt
@@ -4,5 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.0.2
-QEMU 2.1.x and 2.2.x are known broken.
+Tested with QEMU 2.3.0

diff --git a/board/qemu/ppc-virtex-ml507/linux-4.2.config b/board/qemu/ppc-virtex-ml507/linux-4.2.config
deleted file mode 100644 (file)
index ed4eb79..0000000
--- a/board/qemu/ppc-virtex-ml507/linux-4.2.config
+++ /dev/null
@@ -1,36 +0,0 @@
-CONFIG_44x=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_EBONY is not set
-CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
-CONFIG_MATH_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_XILINX_SYSACE=y
-CONFIG_NETDEVICES=y
-CONFIG_SERIO_XILINX_XPS_PS2=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_XILINX_HWICAP=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_XILINX=y
-CONFIG_FB=y
-CONFIG_FB_XILINX=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_EXT4_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y

diff --git a/board/qemu/ppc-virtex-ml507/linux-4.3.config b/board/qemu/ppc-virtex-ml507/linux-4.3.config
new file mode 100644 (file)
index 0000000..ed4eb79
--- /dev/null
+++ b/board/qemu/ppc-virtex-ml507/linux-4.3.config
@@ -0,0 +1,36 @@
+CONFIG_44x=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_EBONY is not set
+CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
+CONFIG_MATH_EMULATION=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_XILINX_SYSACE=y
+CONFIG_NETDEVICES=y
+CONFIG_SERIO_XILINX_XPS_PS2=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_XILINX_HWICAP=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_XILINX=y
+CONFIG_FB=y
+CONFIG_FB_XILINX=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_EXT4_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y

diff --git a/board/qemu/ppc-virtex-ml507/readme.txt b/board/qemu/ppc-virtex-ml507/readme.txt
index 0cf1f9d2662fc599f2879a8a16ffc025bf1761b2..a25ed482bd75cdf2152631e74655a6672726a7f1 100644 (file)
--- a/board/qemu/ppc-virtex-ml507/readme.txt
+++ b/board/qemu/ppc-virtex-ml507/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/ppc64-pseries/readme.txt b/board/qemu/ppc64-pseries/readme.txt
index 718da6fb15cbd212cbf962c128b316bd2590d278..0dd168213442cd3536d4059fc6552e9033441474 100644 (file)
--- a/board/qemu/ppc64-pseries/readme.txt
+++ b/board/qemu/ppc64-pseries/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/sh4-r2d/linux-4.2.config b/board/qemu/sh4-r2d/linux-4.2.config
deleted file mode 100644 (file)
index a3d6544..0000000
--- a/board/qemu/sh4-r2d/linux-4.2.config
+++ /dev/null
@@ -1,38 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_MODULES=y
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_RTS7751R2D=y
-CONFIG_RTS7751R2D_PLUS=y
-CONFIG_HEARTBEAT=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_8139CP=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_SCI=y
-CONFIG_MFD_SM501=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FB_SH_MOBILE_HDMI=y
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND_YMFPCI=y
-CONFIG_SOUND_PRIME=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_R9701=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y

diff --git a/board/qemu/sh4-r2d/linux-4.3.config b/board/qemu/sh4-r2d/linux-4.3.config
new file mode 100644 (file)
index 0000000..a3d6544
--- /dev/null
+++ b/board/qemu/sh4-r2d/linux-4.3.config
@@ -0,0 +1,38 @@
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_CPU_SUBTYPE_SH7751R=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_RTS7751R2D=y
+CONFIG_RTS7751R2D_PLUS=y
+CONFIG_HEARTBEAT=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_8139CP=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SPI=y
+CONFIG_SPI_SH_SCI=y
+CONFIG_MFD_SM501=y
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FB_SH_MOBILE_HDMI=y
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND_YMFPCI=y
+CONFIG_SOUND_PRIME=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_R9701=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y

diff --git a/board/qemu/sh4-r2d/readme.txt b/board/qemu/sh4-r2d/readme.txt
index b7476b936a84a97ad1ecad1fbd5686ea74aefa1f..d877bbff7b55e89449dcbb381c7dc665075fa2f4 100644 (file)
--- a/board/qemu/sh4-r2d/readme.txt
+++ b/board/qemu/sh4-r2d/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/sh4eb-r2d/linux-4.2.config b/board/qemu/sh4eb-r2d/linux-4.2.config
deleted file mode 100644 (file)
index 6ead626..0000000
--- a/board/qemu/sh4eb-r2d/linux-4.2.config
+++ /dev/null
@@ -1,38 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_MODULES=y
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_RTS7751R2D=y
-CONFIG_RTS7751R2D_PLUS=y
-CONFIG_HEARTBEAT=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_8139CP=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_SCI=y
-CONFIG_MFD_SM501=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FB_SH_MOBILE_HDMI=y
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SND_YMFPCI=y
-CONFIG_SOUND_PRIME=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_R9701=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y

diff --git a/board/qemu/sh4eb-r2d/linux-4.3.config b/board/qemu/sh4eb-r2d/linux-4.3.config
new file mode 100644 (file)
index 0000000..6ead626
--- /dev/null
+++ b/board/qemu/sh4eb-r2d/linux-4.3.config
@@ -0,0 +1,38 @@
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_CPU_SUBTYPE_SH7751R=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_RTS7751R2D=y
+CONFIG_RTS7751R2D_PLUS=y
+CONFIG_HEARTBEAT=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_8139CP=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SPI=y
+CONFIG_SPI_SH_SCI=y
+CONFIG_MFD_SM501=y
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FB_SH_MOBILE_HDMI=y
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_SND_YMFPCI=y
+CONFIG_SOUND_PRIME=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_R9701=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y

diff --git a/board/qemu/sh4eb-r2d/readme.txt b/board/qemu/sh4eb-r2d/readme.txt
index 23198ba2e4793550e3315c2919c03af5defb2934..7f5eec4fd353c26443ebd681fb4e4ac271f31086 100644 (file)
--- a/board/qemu/sh4eb-r2d/readme.txt
+++ b/board/qemu/sh4eb-r2d/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
-Tested with QEMU 2.4.0.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/sparc-ss10/linux-4.2.config b/board/qemu/sparc-ss10/linux-4.2.config
deleted file mode 100644 (file)
index cb8d01d..0000000
--- a/board/qemu/sparc-ss10/linux-4.2.config
+++ /dev/null
@@ -1,31 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_SUN_OPENPROMFS=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_WIRELESS is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_SUNESP=y
-CONFIG_NETDEVICES=y
-CONFIG_SUNLANCE=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_SUNKBD=y
-CONFIG_MOUSE_SERIAL=y
-CONFIG_SERIAL_SUNZILOG=y
-CONFIG_SERIAL_SUNZILOG_CONSOLE=y
-CONFIG_SERIAL_SUNSU=y
-CONFIG_SERIAL_SUNSU_CONSOLE=y
-CONFIG_SUN_OPENPROMIO=m
-CONFIG_EXT4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y

diff --git a/board/qemu/sparc-ss10/linux-4.3.config b/board/qemu/sparc-ss10/linux-4.3.config
new file mode 100644 (file)
index 0000000..cb8d01d
--- /dev/null
+++ b/board/qemu/sparc-ss10/linux-4.3.config
@@ -0,0 +1,31 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_SUN_OPENPROMFS=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_WIRELESS is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_SUNESP=y
+CONFIG_NETDEVICES=y
+CONFIG_SUNLANCE=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_SUNKBD=y
+CONFIG_MOUSE_SERIAL=y
+CONFIG_SERIAL_SUNZILOG=y
+CONFIG_SERIAL_SUNZILOG_CONSOLE=y
+CONFIG_SERIAL_SUNSU=y
+CONFIG_SERIAL_SUNSU_CONSOLE=y
+CONFIG_SUN_OPENPROMIO=m
+CONFIG_EXT4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y

diff --git a/board/qemu/sparc-ss10/readme.txt b/board/qemu/sparc-ss10/readme.txt
index 1972a117bc3f0159e16311d576e6a2a4e9209841..1e2738077fe62ffec089c31b90f4bfeea06c4f17 100644 (file)
--- a/board/qemu/sparc-ss10/readme.txt
+++ b/board/qemu/sparc-ss10/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/sparc64-sun4u/linux-4.1.config b/board/qemu/sparc64-sun4u/linux-4.1.config
deleted file mode 100644 (file)
index 2b282f9..0000000
--- a/board/qemu/sparc64-sun4u/linux-4.1.config
+++ /dev/null
@@ -1,27 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_EMBEDDED=y
-CONFIG_MODULES=y
-CONFIG_PCI=y
-CONFIG_SUN_OPENPROMFS=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_CMD64X=y
-CONFIG_NETDEVICES=y
-CONFIG_NE2K_PCI=y
-CONFIG_SERIAL_SUNSU=y
-CONFIG_SERIAL_SUNSU_CONSOLE=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_USE_FOR_EXT23=y 
-CONFIG_TMPFS=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf-8"
-CONFIG_MAGIC_SYSRQ=y

diff --git a/board/qemu/sparc64-sun4u/linux-4.3.config b/board/qemu/sparc64-sun4u/linux-4.3.config
new file mode 100644 (file)
index 0000000..7eda705
--- /dev/null
+++ b/board/qemu/sparc64-sun4u/linux-4.3.config
@@ -0,0 +1,25 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_EMBEDDED=y
+CONFIG_MODULES=y
+CONFIG_PCI=y
+CONFIG_SUN_OPENPROMFS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_CMD64X=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000_PCI=y
+CONFIG_SERIAL_SUNSU=y
+CONFIG_SERIAL_SUNSU_CONSOLE=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf-8"
+CONFIG_MAGIC_SYSRQ=y

diff --git a/board/qemu/sparc64-sun4u/readme.txt b/board/qemu/sparc64-sun4u/readme.txt
index 90d1edc29eb48b74028e241abd6f50471e1452b8..9b37394596171d0ba142f21cd92000b50be6e0b7 100644 (file)
--- a/board/qemu/sparc64-sun4u/readme.txt
+++ b/board/qemu/sparc64-sun4u/readme.txt
@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-sparc64 -M sun4u -kernel output/images/vmlinux -append "root=/dev/sda console=ttyS0,115200" -serial stdio output/images/rootfs.ext2
+  qemu-system-sparc64 -M sun4u -kernel output/images/vmlinux -append "root=/dev/sda console=ttyS0,115200" -serial stdio output/images/rootfs.ext2 -net nic,model=e1000 -net user
 
 The login prompt will appear in the terminal that started Qemu.
 

diff --git a/board/qemu/x86/readme.txt b/board/qemu/x86/readme.txt
index 85d5c6025423da2a1843fe24fdadd75a7f1b46fa..daf62f4fee47393c839d56bab4fd8368b32f6526 100644 (file)
--- a/board/qemu/x86/readme.txt
+++ b/board/qemu/x86/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/x86_64/linux-4.2.config b/board/qemu/x86_64/linux-4.2.config
deleted file mode 100644 (file)
index 20726c3..0000000
--- a/board/qemu/x86_64/linux-4.2.config
+++ /dev/null
@@ -1,23 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_ATA_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_NE2K_PCI=y
-CONFIG_8139CP=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_HDA_INTEL=y
-CONFIG_SND_HDA_GENERIC=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_DRM=y
-CONFIG_DRM_QXL=y

diff --git a/board/qemu/x86_64/linux-4.3.config b/board/qemu/x86_64/linux-4.3.config
new file mode 100644 (file)
index 0000000..20726c3
--- /dev/null
+++ b/board/qemu/x86_64/linux-4.3.config
@@ -0,0 +1,23 @@
+CONFIG_SYSVIPC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+CONFIG_SND_HDA_GENERIC=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_DRM=y
+CONFIG_DRM_QXL=y

diff --git a/board/qemu/x86_64/readme.txt b/board/qemu/x86_64/readme.txt
index d397a79f09503270d0c02521a52ea6b860978bee..cfd52eec254a1f9853273391ea6b4ff4613da697 100644 (file)
--- a/board/qemu/x86_64/readme.txt
+++ b/board/qemu/x86_64/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/board/qemu/xtensa-lx60/linux-4.2.config b/board/qemu/xtensa-lx60/linux-4.2.config
deleted file mode 100644 (file)
index 51701b2..0000000
--- a/board/qemu/xtensa-lx60/linux-4.2.config
+++ /dev/null
@@ -1,36 +0,0 @@
-# CONFIG_SWAP is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_XTENSA_VARIANT_DC232B=y
-# CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is not set
-CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,38400"
-# CONFIG_COMPACTION is not set
-# CONFIG_BOUNCE is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_NETDEVICES=y
-# CONFIG_WLAN is not set
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_LD_NO_RELAX=y
-# CONFIG_S32C1I_SELFTEST is not set

diff --git a/board/qemu/xtensa-lx60/linux-4.3.config b/board/qemu/xtensa-lx60/linux-4.3.config
new file mode 100644 (file)
index 0000000..51701b2
--- /dev/null
+++ b/board/qemu/xtensa-lx60/linux-4.3.config
@@ -0,0 +1,36 @@
+# CONFIG_SWAP is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_XTENSA_VARIANT_DC232B=y
+# CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is not set
+CONFIG_XTENSA_PLATFORM_XTFPGA=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,38400"
+# CONFIG_COMPACTION is not set
+# CONFIG_BOUNCE is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+# CONFIG_WLAN is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_LD_NO_RELAX=y
+# CONFIG_S32C1I_SELFTEST is not set

diff --git a/board/qemu/xtensa-lx60/readme.txt b/board/qemu/xtensa-lx60/readme.txt
index 2dad34a75d35ba1e39f9e4e9552c52c17a2f9224..04393ea2b09edfed01ff1f657e1e0151bc11b3d6 100644 (file)
--- a/board/qemu/xtensa-lx60/readme.txt
+++ b/board/qemu/xtensa-lx60/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.2.1
+Tested with QEMU 2.3.0

diff --git a/configs/qemu_aarch64_virt_defconfig b/configs/qemu_aarch64_virt_defconfig
index 23bd9b2939ac025dfcf02e389e1350201c1f5356..c39fd8158be09207eac554b83793ad87ea6279e8 100644 (file)
--- a/configs/qemu_aarch64_virt_defconfig
+++ b/configs/qemu_aarch64_virt_defconfig
@@ -8,14 +8,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.3.config"

diff --git a/configs/qemu_arm_nuri_defconfig b/configs/qemu_arm_nuri_defconfig
index dad86382f6c0689d2f004139e963f66d91fb0b9c..d2e522f82c997ae8b91bf12c1491612d34fbaee9 100644 (file)
--- a/configs/qemu_arm_nuri_defconfig
+++ b/configs/qemu_arm_nuri_defconfig
@@ -16,12 +16,12 @@ BR2_TARGET_ROOTFS_INITRAMFS=y
 # Lock to 3.10 headers to avoid breaking with newer kernels
 # Stuck at 3.10.x because there's no Nuri DTS
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.10.87"
+BR2_DEFAULT_KERNEL_VERSION="3.10.92"
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.87"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.92"
 BR2_LINUX_KERNEL_DEFCONFIG="exynos4"
 BR2_LINUX_KERNEL_ZIMAGE=y

diff --git a/configs/qemu_arm_versatile_defconfig b/configs/qemu_arm_versatile_defconfig
index 9a69c4972f01ccf656cbae6f85aa7d98fd4da13c..1ce55d0ef16b4cda801962a535c8e400d88751e7 100644 (file)
--- a/configs/qemu_arm_versatile_defconfig
+++ b/configs/qemu_arm_versatile_defconfig
@@ -10,15 +10,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.3.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

diff --git a/configs/qemu_arm_vexpress_defconfig b/configs/qemu_arm_vexpress_defconfig
index 135812a4075699a7f5a01910bd0d1985ca560e08..b036c6b6506db1d1c3b02431b6bfacbb0d130bad 100644 (file)
--- a/configs/qemu_arm_vexpress_defconfig
+++ b/configs/qemu_arm_vexpress_defconfig
@@ -13,15 +13,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
 BR2_LINUX_KERNEL_ZIMAGE=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y

diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig
index f623f6c4636a72a79aa42f2b87a1abc93f1c8790..5730e4cf65c14ba3cfe34bdada6528635eb68a8c 100644 (file)
--- a/configs/qemu_microblazebe_mmu_defconfig
+++ b/configs/qemu_microblazebe_mmu_defconfig
@@ -9,16 +9,16 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.3.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_PATCH="board/qemu/microblazebe-mmu/xilinx-xemaclite.patch"

diff --git a/configs/qemu_microblazeel_mmu_defconfig b/configs/qemu_microblazeel_mmu_defconfig
index 151e2f1f06a8090bee3ccd88bed32e5a806b1af5..8f95c827ee849cbfc2d07bbe2ac9d4fcfb504cfd 100644 (file)
--- a/configs/qemu_microblazeel_mmu_defconfig
+++ b/configs/qemu_microblazeel_mmu_defconfig
@@ -9,16 +9,16 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.3.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_PATCH="board/qemu/microblazeel-mmu/xilinx-xemaclite.patch"

diff --git a/configs/qemu_mips64_malta_defconfig b/configs/qemu_mips64_malta_defconfig
index 2a2e576a74432eec7c555f0ac4223a3d6ec52dd6..94dfb547d9cfe6e2d7567273ce32f10952f61fb3 100644 (file)
--- a/configs/qemu_mips64_malta_defconfig
+++ b/configs/qemu_mips64_malta_defconfig
@@ -6,17 +6,17 @@ BR2_MIPS_NABI64=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.3.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_mips64el_malta_defconfig b/configs/qemu_mips64el_malta_defconfig
index d5f9cc96f1cec22d4cc94aad4d2cb1841add9be8..88828fe01f8ecf63f0dd387f90fa8eed41982bf6 100644 (file)
--- a/configs/qemu_mips64el_malta_defconfig
+++ b/configs/qemu_mips64el_malta_defconfig
@@ -6,17 +6,17 @@ BR2_MIPS_NABI64=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.3.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_mips_malta_defconfig b/configs/qemu_mips_malta_defconfig
index ffd2cbcdf49e6b167a73c9ca09460b7c3bf62125..e6f6a956b37500c202892e8e0d12346f2d171b06 100644 (file)
--- a/configs/qemu_mips_malta_defconfig
+++ b/configs/qemu_mips_malta_defconfig
@@ -6,17 +6,17 @@ BR2_mips_32r2=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-4.3.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_mipsel_malta_defconfig b/configs/qemu_mipsel_malta_defconfig
index fb6af7334ec90f8ce377d697ee5d75b619a5c68d..b14e70c6432e63007a589d15ffada3bbb87d93c2 100644 (file)
--- a/configs/qemu_mipsel_malta_defconfig
+++ b/configs/qemu_mipsel_malta_defconfig
@@ -6,17 +6,17 @@ BR2_mips_32r2=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-4.3.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_ppc64_pseries_defconfig b/configs/qemu_ppc64_pseries_defconfig
index b337b48e02737d4a2401bf856c38cbea83546873..97e53b4e6eea093c8b58f93b581f898cf959469a 100644 (file)
--- a/configs/qemu_ppc64_pseries_defconfig
+++ b/configs/qemu_ppc64_pseries_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="hvc0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_DEFCONFIG="pseries"
 BR2_LINUX_KERNEL_VMLINUX=y

diff --git a/configs/qemu_ppc_g3beige_defconfig b/configs/qemu_ppc_g3beige_defconfig
index 538decb5de0632d8e9e20d730bd373181c72df5f..ae2ddccda4f10e2e784291ad9d4da7cfb1ab7d31 100644 (file)
--- a/configs/qemu_ppc_g3beige_defconfig
+++ b/configs/qemu_ppc_g3beige_defconfig
@@ -6,17 +6,17 @@ BR2_powerpc_750=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.3.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_ppc_mpc8544ds_defconfig b/configs/qemu_ppc_mpc8544ds_defconfig
index d6b8786e69534a85926a5b4b825c003b9c240cc2..198f5cd9c505576db7f9ab8c96d9670aaf8d4ae6 100644 (file)
--- a/configs/qemu_ppc_mpc8544ds_defconfig
+++ b/configs/qemu_ppc_mpc8544ds_defconfig
@@ -6,16 +6,17 @@ BR2_powerpc_8548=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
-BR2_LINUX_KERNEL_DEFCONFIG="mpc85xx"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.3.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

diff --git a/configs/qemu_ppc_virtex_ml507_defconfig b/configs/qemu_ppc_virtex_ml507_defconfig
index d82c2dd3bee3f1469ca90da1622182b60afe8dcc..71f1492d5cfb3ef5a395aaac599598c0b86a5bfd 100644 (file)
--- a/configs/qemu_ppc_virtex_ml507_defconfig
+++ b/configs/qemu_ppc_virtex_ml507_defconfig
@@ -6,10 +6,10 @@ BR2_powerpc_440=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Use soft float
 BR2_SOFT_FLOAT=y
@@ -17,9 +17,9 @@ BR2_SOFT_FLOAT=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.3.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="virtex440-ml507"

diff --git a/configs/qemu_sh4_r2d_defconfig b/configs/qemu_sh4_r2d_defconfig
index 951a9a755419e99244375df8b44095477ecd828e..0666ed4ec41a6d26a47340fb39398719690b04a3 100644 (file)
--- a/configs/qemu_sh4_r2d_defconfig
+++ b/configs/qemu_sh4_r2d_defconfig
@@ -10,15 +10,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.3.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

diff --git a/configs/qemu_sh4eb_r2d_defconfig b/configs/qemu_sh4eb_r2d_defconfig
index 4e6ea97632dbac166fba8e482be9852d40e05677..6680ee3519dd2e931942adfbf4f51be3857eb57f 100644 (file)
--- a/configs/qemu_sh4eb_r2d_defconfig
+++ b/configs/qemu_sh4eb_r2d_defconfig
@@ -10,15 +10,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2.3"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2.3"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.3.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

diff --git a/configs/qemu_sparc64_sun4u_defconfig b/configs/qemu_sparc64_sun4u_defconfig
index 0bb4b3ec73e9472898b019d2ee87ba20c6effb9d..828b437ee1c4a012245e36ec9b0b74e70dfa8637 100644 (file)
--- a/configs/qemu_sparc64_sun4u_defconfig
+++ b/configs/qemu_sparc64_sun4u_defconfig
@@ -6,14 +6,14 @@ BR2_sparc_v9=y
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.1 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.1"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.1.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.3.config"

diff --git a/configs/qemu_sparc_ss10_defconfig b/configs/qemu_sparc_ss10_defconfig
index aa063ca9a1a751853f6f207710a430207dc708a0..3e6d7b1a6985f10245c92b35c48405bc0d18d80f 100644 (file)
--- a/configs/qemu_sparc_ss10_defconfig
+++ b/configs/qemu_sparc_ss10_defconfig
@@ -8,15 +8,15 @@ BR2_GLOBAL_PATCH_DIR="board/qemu/sparc-ss10"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.3.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

diff --git a/configs/qemu_x86_64_defconfig b/configs/qemu_x86_64_defconfig
index cf877ae6c254560a20f7eea7f5f61340ab92e38f..daf32cd556e17f381ad0febde6f97a8f90ffebcb 100644 (file)
--- a/configs/qemu_x86_64_defconfig
+++ b/configs/qemu_x86_64_defconfig
@@ -9,14 +9,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.3.config"

diff --git a/configs/qemu_x86_defconfig b/configs/qemu_x86_defconfig
index 44916721a3167f395ed53f1c4147b0f30d3689a3..f2e202238df4d74874a8facb27eda1020d8092f7 100644 (file)
--- a/configs/qemu_x86_defconfig
+++ b/configs/qemu_x86_defconfig
@@ -12,12 +12,12 @@ BR2_TARGET_ROOTFS_EXT2=y
 
 # Lock to 4.2 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
+BR2_DEFAULT_KERNEL_VERSION="4.2.6"
 BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.2.config"

diff --git a/configs/qemu_xtensa_lx60_defconfig b/configs/qemu_xtensa_lx60_defconfig
index 5c803da11be34608ae9769443749f0bc622e782e..526a111f00738b472c421788fefb9a9aaff32f6c 100644 (file)
--- a/configs/qemu_xtensa_lx60_defconfig
+++ b/configs/qemu_xtensa_lx60_defconfig
@@ -14,17 +14,17 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Lock to 4.2 headers to avoid breaking with newer kernels
+# Lock to 4.3 headers to avoid breaking with newer kernels
 BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="4.2"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
+BR2_DEFAULT_KERNEL_VERSION="4.3"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.2.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.3.config"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
 BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf"
 BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"