+2013-05-23 Yao Qi <yao@codesourcery.com>
+ Pedro Alves <palves@redhat.com>
+
+ * gdb.base/range-stepping.c: New file.
+ * gdb.base/range-stepping.exp: New file.
+ * gdb.trace/range-stepping.c: New file.
+ * gdb.trace/range-stepping.exp: New file.
+ * lib/range-stepping-support.exp: New file.
+
2013-05-22 Tom Tromey <tromey@redhat.com>
* gdb.cp/class2.cc (main): New local 'aref'.
--- /dev/null
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2013 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+/* Note: 'volatile' is used to make sure the compiler doesn't fold /
+ optimize out the arithmetic that uses the variables. */
+
+static int
+func1 (int a, int b)
+{
+ volatile int r = a * b;
+
+ r += (a | b);
+ r += (a - b);
+
+ return r;
+}
+
+int
+main(void)
+{
+ volatile int a = 0;
+ volatile int b = 1;
+ volatile int c = 2;
+ volatile int d = 3;
+ volatile int e = 4;
+ volatile double d1 = 1.0;
+ volatile double d2 = 2.0;
+
+ /* A macro that expands to a single source line that compiles to a
+ number of instructions, with no branches. */
+#define LINE_WITH_MULTIPLE_INSTRUCTIONS \
+ do \
+ { \
+ a = b + c + d * e - a; \
+ } while (0)
+
+ LINE_WITH_MULTIPLE_INSTRUCTIONS; /* location 1 */
+
+ /* A line of source code that compiles to a function call (jump or
+ branch), surrounded by instructions before and after. IOW, this
+ will generate approximately the following pseudo-instructions:
+
+addr1:
+ insn1;
+ insn2;
+ ...
+ call func1;
+ ...
+ insn3;
+addr2:
+ insn4;
+*/
+ e = 10 + func1 (a + b, c * d); /* location 2 */
+
+ e = 10 + func1 (a + b, c * d);
+
+ /* Generate a single source line that includes a short loop. */
+#define LINE_WITH_LOOP \
+ do \
+ { \
+ for (a = 0, e = 0; a < 15; a++) \
+ e += a; \
+ } while (0)
+
+ LINE_WITH_LOOP;
+
+ LINE_WITH_LOOP;
+
+ /* Generate a single source line that includes a time-consuming
+ loop. GDB breaks the loop early by clearing variable 'c'. */
+#define LINE_WITH_TIME_CONSUMING_LOOP \
+ do \
+ { \
+ for (c = 1, a = 0; a < 65535 && c; a++) \
+ for (b = 0; b < 65535 && c; b++) \
+ { \
+ d1 = d2 * a / b; \
+ d2 = d1 * a; \
+ } \
+ } while (0)
+
+ LINE_WITH_TIME_CONSUMING_LOOP;
+
+ /* Some multi-instruction lines for software watchpoint tests. */
+ LINE_WITH_MULTIPLE_INSTRUCTIONS;
+ LINE_WITH_MULTIPLE_INSTRUCTIONS; /* soft-watch */
+ LINE_WITH_MULTIPLE_INSTRUCTIONS;
+
+ return 0;
+}
--- /dev/null
+# Copyright 2013 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+load_lib "range-stepping-support.exp"
+
+standard_testfile
+set executable $testfile
+
+if { [prepare_for_testing $testfile.exp $testfile $srcfile {debug}] } {
+ return -1
+}
+
+if ![runto_main] {
+ fail "Can't run to main"
+ return -1
+}
+
+# Check whether range stepping is supported by the target.
+
+proc gdb_range_stepping_enabled { } {
+ global gdb_prompt
+
+ set command "set range-stepping on"
+ set message "probe range-stepping support"
+ gdb_test_multiple $command $message {
+ -re "Range stepping is not supported.*\r\n$gdb_prompt $" {
+ pass $message
+ return 0
+ }
+ -re "^$command\r\n$gdb_prompt $" {
+ pass $message
+ return 1
+ }
+ }
+
+ return 0
+}
+
+if ![gdb_range_stepping_enabled] {
+ unsupported "range stepping not supported by the target"
+ return -1
+}
+
+# Check that range stepping can step a range of multiple instructions.
+
+with_test_prefix "multi insns" {
+
+ gdb_breakpoint [gdb_get_line_number "location 1"]
+ gdb_continue_to_breakpoint "location 1"
+
+ set pc_before_stepping ""
+ set test "pc before stepping"
+ gdb_test_multiple "print/x \$pc" $test {
+ -re "\\\$$decimal = (\[^\r\n\]*)\r\n$gdb_prompt $" {
+ set pc_before_stepping $expect_out(1,string)
+ pass $test
+ }
+ }
+
+ # When "next" is executed, GDB should send one vCont;s and vCont;r
+ # and receive two stop replies:
+ #
+ # --> vCont;s (step over breakpoint)
+ # <-- T05
+ # --> vCont;rSTART,END (range step)
+ # <-- T05
+ exec_cmd_expect_vCont_count "next" 1 1
+
+ set pc_after_stepping ""
+ set msg "pc after stepping"
+ gdb_test_multiple "print/x \$pc" $msg {
+ -re "\\\$$decimal = (\[^\r\n\]*)\r\n$gdb_prompt $" {
+ set pc_after_stepping $expect_out(1,string)
+ pass $msg
+ }
+ }
+
+ # There should be at least two instructions between
+ # PC_BEFORE_STEPPING and PC_AFTER_STEPPING.
+ gdb_test "disassemble ${pc_before_stepping},${pc_after_stepping}" \
+ "${hex} <main\\+${decimal}>:.*${hex} <main\\+${decimal}>:.*" \
+ "stepped multiple insns"
+}
+
+# Check that range stepping can step over a function.
+
+with_test_prefix "step over func" {
+
+ set line_num [gdb_get_line_number "location 2"]
+ gdb_test "where" "main \\(\\) at .*${srcfile}:${line_num}.*"
+
+ # It's expected to get three stops and two 'vCont;r's. In the C
+ # code, the line of C source produces roughly the following
+ # instructions:
+ #
+ # addr1:
+ # insn1
+ # insn2
+ # ...
+ # call func1
+ # addr2:
+ # ...
+ # insn3
+ # addr3:
+ # insn4
+ #
+ # Something like this will happen:
+ # --> vCont;rADDR1,ADDR3 (range step from ADDR1 to ADDR3)
+ # <-- T05 (target single-stepped to func, which is out of the step range)
+ # --> $Z0,ADDR2 (place step-resume breakpoint at ADDR2)
+ # --> vCont;c (resume)
+ # <-- T05 (target stops at ADDR2)
+ # --> vCont;rADDR1,ADDR3 (continues range stepping)
+ # <-- T05
+ exec_cmd_expect_vCont_count "next" 0 2
+}
+
+# Check that breakpoints interrupt range stepping correctly.
+
+with_test_prefix "breakpoint" {
+ gdb_breakpoint "func1"
+ # Something like this will happen:
+ # --> vCont;rADDR1,ADDR3
+ # <-- T05 (target single-steps to func1, which is out of the step range)
+ # --> $Z0,ADDR2 (step-resume breakpoint at ADDR2)
+ # --> vCont;c (resume)
+ # <-- T05 (target hits the breakpoint at func1)
+ exec_cmd_expect_vCont_count "next" 0 1
+
+ gdb_test "backtrace" "#0 .* func1 .*#1 .* main .*" \
+ "backtrace from func1"
+
+ # A cancelled range step should not confuse the following
+ # execution commands.
+ exec_cmd_expect_vCont_count "stepi" 1 0
+ gdb_test "finish" ".*"
+ gdb_test "next" ".*"
+ delete_breakpoints
+}
+
+# Check that range stepping works well even when there's a loop in the
+# step range.
+
+with_test_prefix "loop" {
+
+ # GDB should send one vCont;r and receive one stop reply:
+ # --> vCont;rSTART,END (range step)
+ # <-- T05
+ exec_cmd_expect_vCont_count "next" 0 1
+
+ # Confirm the loop completed.
+ gdb_test "print a" " = 15"
+ gdb_test "print e" " = 105"
+}
+
+# Check that range stepping works well even when the target's PC was
+# already within the loop's body.
+
+with_test_prefix "loop 2" {
+ # Stepi into the loop body. 15 should be large enough to make
+ # sure the program stops within the loop's body.
+ gdb_test "stepi 15" ".*"
+ # GDB should send one vCont;r and receive one stop reply:
+ # --> vCont;rSTART,END (range step)
+ # <-- T05
+ exec_cmd_expect_vCont_count "next" 0 1
+
+ # Confirm the loop completed.
+ gdb_test "print a" " = 15"
+ gdb_test "print e" " = 105"
+}
+
+# Check that range stepping works well even when it is interrupted by
+# ctrl-c.
+
+with_test_prefix "interrupt" {
+ gdb_test_no_output "set debug remote 1"
+
+ send_gdb "next\n"
+ sleep 1
+ send_gdb "\003"
+
+ # GDB should send one vCont;r and receive one stop reply for
+ # SIGINT:
+ # --> vCont;rSTART,END (range step)
+ # <-- T02 (SIGINT)
+
+ set vcont_r_counter 0
+
+ set test "send ctrl-c to GDB"
+ gdb_test_multiple "" $test {
+ -re "vCont;r\[^\r\n\]*\.\.\." {
+ incr vcont_r_counter
+ exp_continue
+ }
+ -re "Program received signal SIGINT.*$gdb_prompt $" {
+ pass $test
+ }
+ }
+ gdb_test_no_output "set debug remote 0"
+
+ # Check the number of 'vCont;r' packets.
+ if { $vcont_r_counter == 1 } {
+ pass "${test}: 1 vCont;r"
+ } else {
+ fail "${test}: 1 vCont;r"
+ }
+
+ # Break the loop earlier and continue range stepping.
+ gdb_test "set variable c = 0"
+ exec_cmd_expect_vCont_count "next" 0 1
+}
+
+# Check that range stepping doesn't break software watchpoints. With
+# those, GDB needs to be notified of all single-steps, to evaluate
+# whether the watched value changes at each step.
+with_test_prefix "software watchpoint" {
+ gdb_test "step" "soft-watch.*" "step into multiple instruction line"
+ # A software watchpoint at PC makes the thread stop before the
+ # whole line range is over (after one single-step, actually).
+ gdb_test "watch \$pc" ".*" "set watchpoint"
+ gdb_test "step" "soft-watch.*" "step still in same line"
+}
+
+return 0
--- /dev/null
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2013 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#ifdef SYMBOL_PREFIX
+#define SYMBOL(str) SYMBOL_PREFIX #str
+#else
+#define SYMBOL(str) #str
+#endif
+
+/* `set_point' further below is the label where we'll set tracepoints
+ at. The insn at the label must the large enough to fit a fast
+ tracepoint jump. */
+#if (defined __x86_64__ || defined __i386__)
+# define NOP " .byte 0xe9,0x00,0x00,0x00,0x00\n" /* jmp $+5 (5-byte nop) */
+#else
+# define NOP "" /* port me */
+#endif
+
+int
+main(void)
+{
+ /* Note: 'volatile' is used to make sure the compiler doesn't
+ optimize out these variables. We want to be sure instructions
+ are generated for accesses. */
+ volatile int i = 0;
+
+ /* Generate a single line with a label in the middle where we can
+ place either a trap tracepoint or a fast tracepoint. */
+#define LINE_WITH_FAST_TRACEPOINT \
+ do { \
+ i = 1; \
+ asm (" .global " SYMBOL (set_point) "\n" \
+ SYMBOL (set_point) ":\n" \
+ NOP \
+ ); \
+ i = 2; \
+ } while (0)
+
+ LINE_WITH_FAST_TRACEPOINT; /* location 1 */
+
+ return 0;
+}
--- /dev/null
+# Copyright 2013 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+load_lib "trace-support.exp"
+load_lib "range-stepping-support.exp"
+
+standard_testfile
+set executable $testfile
+
+if [prepare_for_testing $testfile.exp $executable $srcfile \
+ {debug nowarnings}] {
+ return -1
+}
+
+if ![runto_main] {
+ fail "Can't run to main to check for trace support"
+ return -1
+}
+
+if ![gdb_target_supports_trace] {
+ unsupported "target does not support trace"
+ return -1;
+}
+
+# Check that range stepping works well with tracepoints.
+
+proc range_stepping_with_tracepoint { type } {
+ with_test_prefix "${type}" {
+ gdb_breakpoint [gdb_get_line_number "location 1"]
+ gdb_continue_to_breakpoint "location 1"
+ delete_breakpoints
+
+ gdb_test "${type} *set_point" ".*"
+ gdb_test_no_output "tstart"
+
+ # Step a line with a tracepoint in the middle. The tracepoint
+ # itself shouldn't have any effect on range stepping. We
+ # should see one vCont;r and no vCont;s's.
+ exec_cmd_expect_vCont_count "step" 0 1
+ gdb_test_no_output "tstop"
+ gdb_test "tfind" "Found trace frame .*" "first tfind"
+ gdb_test "tfind" \
+ "Target failed to find requested trace frame.*" \
+ "second tfind"
+
+ delete_breakpoints
+ }
+}
+
+range_stepping_with_tracepoint "trace"
+
+set libipa [get_in_proc_agent]
+gdb_load_shlibs $libipa
+
+if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
+ executable [list debug nowarnings shlib=$libipa] ] != "" } {
+ untested "failed to compile ftrace tests"
+ return -1
+}
+
+clean_restart ${executable}
+
+if ![runto_main] {
+ fail "Can't run to main for ftrace tests"
+ return 0
+}
+
+gdb_reinitialize_dir $srcdir/$subdir
+if { [gdb_test "info sharedlibrary" ".*${libipa}.*" "IPA loaded"] != 0 } {
+ untested "Could not find IPA lib loaded"
+} else {
+ range_stepping_with_tracepoint "ftrace"
+}
--- /dev/null
+# Copyright 2013 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Execute command CMD and check that GDB sends the expected number of
+# vCont;s and vCont;r packets.
+
+proc exec_cmd_expect_vCont_count { cmd exp_vCont_s exp_vCont_r } {
+ global gdb_prompt
+
+ gdb_test_no_output "set debug remote 1" ""
+
+ set test "${cmd}: vCont;s=${exp_vCont_s} vCont;r=${exp_vCont_r}"
+ set r_counter 0
+ set s_counter 0
+ gdb_test_multiple $cmd $test {
+ -re "vCont;s\[^\r\n\]*Packet received: T\[\[:xdigit:\]\]\[\[:xdigit:\]\]" {
+ incr s_counter
+ exp_continue
+ }
+ -re "vCont;r\[^\r\n\]*Packet received: T\[\[:xdigit:\]\]\[\[:xdigit:\]\]" {
+ incr r_counter
+ exp_continue
+ }
+ -re "\r\n" {
+ # Prevent overflowing the expect buffer.
+ exp_continue
+ }
+ -re "$gdb_prompt $" {
+ if { $r_counter == ${exp_vCont_r} && $s_counter == ${exp_vCont_s} } {
+ pass $test
+ } else {
+ fail $test
+ }
+ }
+ }
+
+ gdb_test_no_output "set debug remote 0" ""
+}
projects / binutils-gdb.git / commitdiff