r300: Converted to the new Vector Engine defines.

diff --git a/src/mesa/drivers/dri/r300/r300_reg.h b/src/mesa/drivers/dri/r300/r300_reg.h
index 29d2e7f4f34c858331398532cb49aa5a130a2714..48b91cfd7b38a7fb7ca97aef7a439d48a1f39e78 100644 (file)
--- a/src/mesa/drivers/dri/r300/r300_reg.h
+++ b/src/mesa/drivers/dri/r300/r300_reg.h
@@ -2499,51 +2499,6 @@ enum {
 
 /*\{*/
 
-/* Every instruction is four dwords long:
- *  DWORD 0: output and opcode
- *  DWORD 1: first argument
- *  DWORD 2: second argument
- *  DWORD 3: third argument
- *
- * Notes:
- *  - ABS r, a is implemented as MAX r, a, -a
- *  - MOV is implemented as ADD to zero
- *  - XPD is implemented as MUL + MAD
- *  - FLR is implemented as FRC + ADD
- *  - apparently, fglrx tries to schedule instructions so that there is at
- *    least one instruction between the write to a temporary and the first
- *    read from said temporary; however, violations of this scheduling are
- *    allowed
- *  - register indices seem to be unrelated with OpenGL aliasing to
- *    conventional state
- *  - only one attribute and one parameter can be loaded at a time; however,
- *    the same attribute/parameter can be used for more than one argument
- *  - the second software argument for POW is the third hardware argument
- *    (no idea why)
- *  - MAD with only temporaries as input seems to use VPI_OUT_SELECT_MAD_2
- *
- * There is some magic surrounding LIT:
- *   The single argument is replicated across all three inputs, but swizzled:
- *     First argument: xyzy
- *     Second argument: xyzx
- *     Third argument: xyzw
- *   Whenever the result is used later in the fragment program, fglrx forces
- *   x and w to be 1.0 in the input selection; I don't know whether this is
- *   strictly necessary
- */
-#define R300_VPI_OUT_OP_DOT                     (1 << 0)
-#define R300_VPI_OUT_OP_MUL                     (2 << 0)
-#define R300_VPI_OUT_OP_ADD                     (3 << 0)
-#define R300_VPI_OUT_OP_MAD                     (4 << 0)
-#define R300_VPI_OUT_OP_DST                     (5 << 0)
-#define R300_VPI_OUT_OP_FRC                     (6 << 0)
-#define R300_VPI_OUT_OP_MAX                     (7 << 0)
-#define R300_VPI_OUT_OP_MIN                     (8 << 0)
-#define R300_VPI_OUT_OP_SGE                     (9 << 0)
-#define R300_VPI_OUT_OP_SLT                     (10 << 0)
-       /* Used in GL_POINT_DISTANCE_ATTENUATION_ARB, vector(scalar, vector) */
-#define R300_VPI_OUT_OP_UNK12                   (12 << 0)
-#define R300_VPI_OUT_OP_ARL                     (13 << 0)
 #define R300_VPI_OUT_OP_EXP                     (65 << 0)
 #define R300_VPI_OUT_OP_LOG                     (66 << 0)
        /* Used in fog computations, scalar(scalar) */

diff --git a/src/mesa/drivers/dri/r300/r300_state.c b/src/mesa/drivers/dri/r300/r300_state.c
index 6f9f3fbf5d113720d41380b9741dddf38deb7ee9..2387b151716e566cef21b4705428e17a00c93f09 100644 (file)
--- a/src/mesa/drivers/dri/r300/r300_state.c
+++ b/src/mesa/drivers/dri/r300/r300_state.c
@@ -1659,7 +1659,7 @@ static void r300SetupDefaultVertexProgram(r300ContextPtr rmesa)
 
        for (i = VERT_ATTRIB_POS; i < VERT_ATTRIB_MAX; i++) {
                if (rmesa->state.sw_tcl_inputs[i] != -1) {
-                       prog->program.body.i[program_end + 0] = MAKE_VSF_OP(R300_VPI_OUT_OP_MUL, o_reg++, VSF_FLAG_ALL, PVS_DST_REG_OUT);
+                       prog->program.body.i[program_end + 0] = MAKE_VSF_OP(VE_MULTIPLY, o_reg++, VSF_FLAG_ALL, PVS_DST_REG_OUT);
                        prog->program.body.i[program_end + 1] = VSF_REG(rmesa->state.sw_tcl_inputs[i]);
                        prog->program.body.i[program_end + 2] = VSF_ATTR_UNITY(rmesa->state.sw_tcl_inputs[i]);
                        prog->program.body.i[program_end + 3] = VSF_UNITY(rmesa->state.sw_tcl_inputs[i]);

diff --git a/src/mesa/drivers/dri/r300/r300_vertprog.c b/src/mesa/drivers/dri/r300/r300_vertprog.c
index 7e724514b06b10bc479b267d469ac449db1e9aa1..ec2299f4c80978cdbc993c4fd74e5dde03e77189 100644 (file)
--- a/src/mesa/drivers/dri/r300/r300_vertprog.c
+++ b/src/mesa/drivers/dri/r300/r300_vertprog.c
@@ -376,7 +376,7 @@ static GLuint *t_opcode_abs(struct r300_vertex_program *vp,
        //MAX RESULT 1.X Y Z W PARAM 0{} {X Y Z W} PARAM 0{X Y Z W } {X Y Z W} neg Xneg Yneg Zneg W
 
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_MAX, t_dst_index(vp, &vpi->DstReg),
+           MAKE_VSF_OP(VE_MAXIMUM, t_dst_index(vp, &vpi->DstReg),
                        t_dst_mask(vpi->DstReg.WriteMask),
                        t_dst_class(vpi->DstReg.File));
 
@@ -406,7 +406,7 @@ static GLuint *t_opcode_add(struct r300_vertex_program *vp,
        hw_op = (src[0].File == PROGRAM_TEMPORARY
                 && src[1].File ==
                 PROGRAM_TEMPORARY) ? R300_VPI_OUT_OP_MAD_2 :
-           R300_VPI_OUT_OP_MAD;
+           VE_MULTIPLY_ADD;
 
        inst[0] =
            MAKE_VSF_OP(hw_op, t_dst_index(vp, &vpi->DstReg),
@@ -417,7 +417,7 @@ static GLuint *t_opcode_add(struct r300_vertex_program *vp,
        inst[3] = t_src(vp, &src[1]);
 #else
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_ADD, t_dst_index(vp, &vpi->DstReg),
+           MAKE_VSF_OP(VE_ADD, t_dst_index(vp, &vpi->DstReg),
                        t_dst_mask(vpi->DstReg.WriteMask),
                        t_dst_class(vpi->DstReg.File));
        inst[1] = t_src(vp, &src[0]);
@@ -434,7 +434,7 @@ static GLuint *t_opcode_arl(struct r300_vertex_program *vp,
                            struct prog_src_register src[3])
 {
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_ARL, t_dst_index(vp, &vpi->DstReg),
+           MAKE_VSF_OP(VE_FLT2FIX_DX, t_dst_index(vp, &vpi->DstReg),
                        t_dst_mask(vpi->DstReg.WriteMask),
                        t_dst_class(vpi->DstReg.File));
 
@@ -452,7 +452,7 @@ static GLuint *t_opcode_dp3(struct r300_vertex_program *vp,
        //DOT RESULT 1.X Y Z W PARAM 0{} {X Y Z ZERO} PARAM 0{} {X Y Z ZERO}
 
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_DOT, t_dst_index(vp, &vpi->DstReg),
+           MAKE_VSF_OP(VE_DOT_PRODUCT, t_dst_index(vp, &vpi->DstReg),
                        t_dst_mask(vpi->DstReg.WriteMask),
                        t_dst_class(vpi->DstReg.File));
 
@@ -486,7 +486,7 @@ static GLuint *t_opcode_dp4(struct r300_vertex_program *vp,
                            struct prog_src_register src[3])
 {
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_DOT, t_dst_index(vp, &vpi->DstReg),
+           MAKE_VSF_OP(VE_DOT_PRODUCT, t_dst_index(vp, &vpi->DstReg),
                        t_dst_mask(vpi->DstReg.WriteMask),
                        t_dst_class(vpi->DstReg.File));
 
@@ -503,7 +503,7 @@ static GLuint *t_opcode_dph(struct r300_vertex_program *vp,
 {
        //DOT RESULT 1.X Y Z W PARAM 0{} {X Y Z ONE} PARAM 0{} {X Y Z W}
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_DOT, t_dst_index(vp, &vpi->DstReg),
+           MAKE_VSF_OP(VE_DOT_PRODUCT, t_dst_index(vp, &vpi->DstReg),
                        t_dst_mask(vpi->DstReg.WriteMask),
                        t_dst_class(vpi->DstReg.File));
 
@@ -527,7 +527,7 @@ static GLuint *t_opcode_dst(struct r300_vertex_program *vp,
                            struct prog_src_register src[3])
 {
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_DST, t_dst_index(vp, &vpi->DstReg),
+           MAKE_VSF_OP(VE_DISTANCE_VECTOR, t_dst_index(vp, &vpi->DstReg),
                        t_dst_mask(vpi->DstReg.WriteMask),
                        t_dst_class(vpi->DstReg.File));
 
@@ -578,7 +578,7 @@ static GLuint *t_opcode_flr(struct r300_vertex_program *vp,
           ADD RESULT 1.X Y Z W PARAM 0{} {X Y Z W} TMP 0{X Y Z W } {X Y Z W} neg Xneg Yneg Zneg W */
 
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_FRC, *u_temp_i,
+           MAKE_VSF_OP(VE_FRACTION, *u_temp_i,
                        t_dst_mask(vpi->DstReg.WriteMask),
                        PVS_DST_REG_TEMPORARY);
 
@@ -588,7 +588,7 @@ static GLuint *t_opcode_flr(struct r300_vertex_program *vp,
        inst += 4;
 
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_ADD, t_dst_index(vp, &vpi->DstReg),
+           MAKE_VSF_OP(VE_ADD, t_dst_index(vp, &vpi->DstReg),
                        t_dst_mask(vpi->DstReg.WriteMask),
                        t_dst_class(vpi->DstReg.File));
 
@@ -613,7 +613,7 @@ static GLuint *t_opcode_frc(struct r300_vertex_program *vp,
                            struct prog_src_register src[3])
 {
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_FRC, t_dst_index(vp, &vpi->DstReg),
+           MAKE_VSF_OP(VE_FRACTION, t_dst_index(vp, &vpi->DstReg),
                        t_dst_mask(vpi->DstReg.WriteMask),
                        t_dst_class(vpi->DstReg.File));
 
@@ -716,7 +716,7 @@ static GLuint *t_opcode_mad(struct r300_vertex_program *vp,
                 && src[1].File == PROGRAM_TEMPORARY
                 && src[2].File ==
                 PROGRAM_TEMPORARY) ? R300_VPI_OUT_OP_MAD_2 :
-           R300_VPI_OUT_OP_MAD;
+           VE_MULTIPLY_ADD;
 
        inst[0] =
            MAKE_VSF_OP(hw_op, t_dst_index(vp, &vpi->DstReg),
@@ -734,7 +734,7 @@ static GLuint *t_opcode_max(struct r300_vertex_program *vp,
                            struct prog_src_register src[3])
 {
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_MAX, t_dst_index(vp, &vpi->DstReg),
+           MAKE_VSF_OP(VE_MAXIMUM, t_dst_index(vp, &vpi->DstReg),
                        t_dst_mask(vpi->DstReg.WriteMask),
                        t_dst_class(vpi->DstReg.File));
 
@@ -750,7 +750,7 @@ static GLuint *t_opcode_min(struct r300_vertex_program *vp,
                            struct prog_src_register src[3])
 {
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_MIN, t_dst_index(vp, &vpi->DstReg),
+           MAKE_VSF_OP(VE_MINIMUM, t_dst_index(vp, &vpi->DstReg),
                        t_dst_mask(vpi->DstReg.WriteMask),
                        t_dst_class(vpi->DstReg.File));
 
@@ -769,7 +769,7 @@ static GLuint *t_opcode_mov(struct r300_vertex_program *vp,
 
 #if 1
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_ADD, t_dst_index(vp, &vpi->DstReg),
+           MAKE_VSF_OP(VE_ADD, t_dst_index(vp, &vpi->DstReg),
                        t_dst_mask(vpi->DstReg.WriteMask),
                        t_dst_class(vpi->DstReg.File));
        inst[1] = t_src(vp, &src[0]);
@@ -779,7 +779,7 @@ static GLuint *t_opcode_mov(struct r300_vertex_program *vp,
        hw_op =
            (src[0].File ==
             PROGRAM_TEMPORARY) ? R300_VPI_OUT_OP_MAD_2 :
-           R300_VPI_OUT_OP_MAD;
+           VE_MULTIPLY_ADD;
 
        inst[0] =
            MAKE_VSF_OP(hw_op, t_dst_index(vp, &vpi->DstReg),
@@ -804,7 +804,7 @@ static GLuint *t_opcode_mul(struct r300_vertex_program *vp,
        hw_op = (src[0].File == PROGRAM_TEMPORARY
                 && src[1].File ==
                 PROGRAM_TEMPORARY) ? R300_VPI_OUT_OP_MAD_2 :
-           R300_VPI_OUT_OP_MAD;
+           VE_MULTIPLY_ADD;
 
        inst[0] =
            MAKE_VSF_OP(hw_op, t_dst_index(vp, &vpi->DstReg),
@@ -870,7 +870,7 @@ static GLuint *t_opcode_sge(struct r300_vertex_program *vp,
                            struct prog_src_register src[3])
 {
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_SGE, t_dst_index(vp, &vpi->DstReg),
+           MAKE_VSF_OP(VE_SET_GREATER_THAN_EQUAL, t_dst_index(vp, &vpi->DstReg),
                        t_dst_mask(vpi->DstReg.WriteMask),
                        t_dst_class(vpi->DstReg.File));
 
@@ -886,7 +886,7 @@ static GLuint *t_opcode_slt(struct r300_vertex_program *vp,
                            struct prog_src_register src[3])
 {
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_SLT, t_dst_index(vp, &vpi->DstReg),
+           MAKE_VSF_OP(VE_SET_LESS_THAN, t_dst_index(vp, &vpi->DstReg),
                        t_dst_mask(vpi->DstReg.WriteMask),
                        t_dst_class(vpi->DstReg.File));
 
@@ -909,7 +909,7 @@ static GLuint *t_opcode_sub(struct r300_vertex_program *vp,
        hw_op = (src[0].File == PROGRAM_TEMPORARY
                 && src[1].File ==
                 PROGRAM_TEMPORARY) ? R300_VPI_OUT_OP_MAD_2 :
-           R300_VPI_OUT_OP_MAD;
+           VE_MULTIPLY_ADD;
 
        inst[0] =
            MAKE_VSF_OP(hw_op, t_dst_index(vp, &vpi->DstReg),
@@ -929,7 +929,7 @@ static GLuint *t_opcode_sub(struct r300_vertex_program *vp,
            (src[1].RelAddr << 4);
 #else
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_ADD, t_dst_index(vp, &vpi->DstReg),
+           MAKE_VSF_OP(VE_ADD, t_dst_index(vp, &vpi->DstReg),
                        t_dst_mask(vpi->DstReg.WriteMask),
                        t_dst_class(vpi->DstReg.File));
 
@@ -958,7 +958,7 @@ static GLuint *t_opcode_swz(struct r300_vertex_program *vp,
 
 #if 1
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_ADD, t_dst_index(vp, &vpi->DstReg),
+           MAKE_VSF_OP(VE_ADD, t_dst_index(vp, &vpi->DstReg),
                        t_dst_mask(vpi->DstReg.WriteMask),
                        t_dst_class(vpi->DstReg.File));
        inst[1] = t_src(vp, &src[0]);
@@ -968,7 +968,7 @@ static GLuint *t_opcode_swz(struct r300_vertex_program *vp,
        hw_op =
            (src[0].File ==
             PROGRAM_TEMPORARY) ? R300_VPI_OUT_OP_MAD_2 :
-           R300_VPI_OUT_OP_MAD;
+           VE_MULTIPLY_ADD;
 
        inst[0] =
            MAKE_VSF_OP(hw_op, t_dst_index(vp, &vpi->DstReg),
@@ -992,7 +992,7 @@ static GLuint *t_opcode_xpd(struct r300_vertex_program *vp,
         */
 
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_MAD, *u_temp_i,
+           MAKE_VSF_OP(VE_MULTIPLY_ADD, *u_temp_i,
                        t_dst_mask(vpi->DstReg.WriteMask),
                        PVS_DST_REG_TEMPORARY);
 
@@ -1019,7 +1019,7 @@ static GLuint *t_opcode_xpd(struct r300_vertex_program *vp,
        (*u_temp_i)--;
 
        inst[0] =
-           MAKE_VSF_OP(R300_VPI_OUT_OP_MAD, t_dst_index(vp, &vpi->DstReg),
+           MAKE_VSF_OP(VE_MULTIPLY_ADD, t_dst_index(vp, &vpi->DstReg),
                        t_dst_mask(vpi->DstReg.WriteMask),
                        t_dst_class(vpi->DstReg.File));
 
@@ -1147,7 +1147,7 @@ static void r300TranslateVertexShader(struct r300_vertex_program *vp,
                        if (CMP_SRCS(src[1], src[2])
                            || CMP_SRCS(src[0], src[2])) {
                                inst[0] =
-                                   MAKE_VSF_OP(R300_VPI_OUT_OP_ADD,
+                                   MAKE_VSF_OP(VE_ADD,
                                                u_temp_i, VSF_FLAG_ALL,
                                                PVS_DST_REG_TEMPORARY);
 
@@ -1175,7 +1175,7 @@ static void r300TranslateVertexShader(struct r300_vertex_program *vp,
                if (num_operands >= 2) {
                        if (CMP_SRCS(src[1], src[0])) {
                                inst[0] =
-                                   MAKE_VSF_OP(R300_VPI_OUT_OP_ADD,
+                                   MAKE_VSF_OP(VE_ADD,
                                                u_temp_i, VSF_FLAG_ALL,
                                                PVS_DST_REG_TEMPORARY);
 
@@ -1296,8 +1296,9 @@ static void r300TranslateVertexShader(struct r300_vertex_program *vp,
           of the fragment program. Blank the outputs here. */
        for (i = 0; i < VERT_RESULT_MAX; i++) {
                if (vp->key.OutputsAdded & (1 << i)) {
-                       inst[0] = MAKE_VSF_OP(R300_VPI_OUT_OP_ADD, vp->outputs[i],
-                                             VSF_FLAG_ALL, VSF_OUT_CLASS_RESULT);
+                       inst[0] = MAKE_VSF_OP(VE_ADD, vp->outputs[i],
+                                             VSF_FLAG_ALL,
+                                             VSF_OUT_CLASS_RESULT);
                        inst[1] = ZERO_SRC_0;
                        inst[2] = ZERO_SRC_0;
                        inst[3] = ZERO_SRC_0;

diff --git a/src/mesa/drivers/dri/r300/r300_vertprog.h b/src/mesa/drivers/dri/r300/r300_vertprog.h
index 6f7afec3f3d5ccea93e88dc1ebeac7a71220561b..90906cc1e30700c5972daa22dc36fddb24a688be 100644 (file)
--- a/src/mesa/drivers/dri/r300/r300_vertprog.h
+++ b/src/mesa/drivers/dri/r300/r300_vertprog.h
@@ -102,7 +102,7 @@
 #define VP_OUTMASK_ZW  (VP_OUTMASK_Z|VP_OUTMASK_W)
 
 #define VP_OUT(instr,outclass,outidx,outmask) \
-       (R300_VPI_OUT_OP_##instr |                              \
+       (VE_##instr |                           \
        ((outidx) << R300_VPI_OUT_REG_INDEX_SHIFT) |            \
        VP_OUTCLASS_##outclass |                                \
        VP_OUTMASK_##outmask)