}
partition uimage {
image = "uImage.da850-lego-ev3"
- size = 3M
+ size = 4M
offset = 0x50000
}
partition rootfs {
image = "rootfs.squashfs"
- size = 9600K
- offset = 0x350000
+ size = 10M
+ offset = 0x450000
}
}
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
+CONFIG_DRM=y
+CONFIG_DRM_TILCDC=n
+CONFIG_DRM_DUMB_VGA_DAC=n
+CONFIG_DRM_TINYDRM=y
+CONFIG_TINYDRM_ST7586=y
+CONFIG_FB_DA8XX=n
+++ /dev/null
-From 8a81ff173c5c9a0ab1df84fab17971dbcce8490a Mon Sep 17 00:00:00 2001
-From: David Lechner <david@lechnology.com>
-Date: Tue, 7 Feb 2017 13:22:07 -0600
-Subject: ARM: da850-lego-ev3: Add device tree node for A/DC
-
-This adds a node for the TI ADS7957 analog/digital converter on LEGO
-MINDSTORMS EV3 as well as a regulator node that is used by the A/DC node.
-
-Signed-off-by: David Lechner <david@lechnology.com>
-Signed-off-by: Sekhar Nori <nsekhar@ti.com>
----
- arch/arm/boot/dts/da850-lego-ev3.dts | 21 +++++++++++++++++++++
- 1 file changed, 21 insertions(+)
-
-diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
-index 112ec92..0309537 100644
---- a/arch/arm/boot/dts/da850-lego-ev3.dts
-+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
-@@ -139,6 +139,19 @@
- enable-active-high;
- regulator-boot-on;
- };
-+
-+ /*
-+ * This is a simple voltage divider on VCC5V to provide a 2.5V
-+ * reference signal to the ADC.
-+ */
-+ adc_ref: regulator2 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "adc ref";
-+ regulator-min-microvolt = <2500000>;
-+ regulator-max-microvolt = <2500000>;
-+ regulator-boot-on;
-+ vin-supply = <&vcc5v>;
-+ };
- };
-
- &pmx_core {
-@@ -293,6 +306,14 @@
- };
- };
- };
-+
-+ adc: adc@3 {
-+ compatible = "ti,ads7957";
-+ reg = <3>;
-+ #io-channel-cells = <1>;
-+ spi-max-frequency = <10000000>;
-+ vref-supply = <&adc_ref>;
-+ };
- };
-
- &gpio {
---
-cgit v1.1
-
+++ /dev/null
-From 7723d70bebd749ef24fef19db52d827c7fd7f858 Mon Sep 17 00:00:00 2001
-From: David Lechner <david@lechnology.com>
-Date: Tue, 7 Feb 2017 13:22:09 -0600
-Subject: ARM: da850-lego-ev3: Add device tree node for sound
-
-This adds a device tree node for sound on LEGO MINDSTORMS EV3. The EV3
-uses one of the SoC PWMs connected to an amplifier to create sound from
-a speaker.
-
-The PWM is passed through a low-pass filter, so it is actually possible
-to do PCM playback, but there is no existing driver, so just using
-pwm-beeper for now, since it is also a compatible mode of operation.
-
-Signed-off-by: David Lechner <david@lechnology.com>
-Signed-off-by: Sekhar Nori <nsekhar@ti.com>
----
- arch/arm/boot/dts/da850-lego-ev3.dts | 31 +++++++++++++++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
-diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
-index 0309537..c20580a 100644
---- a/arch/arm/boot/dts/da850-lego-ev3.dts
-+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
-@@ -123,6 +123,14 @@
- pinctrl-0 = <&system_power_pin>;
- };
-
-+ sound {
-+ compatible = "pwm-beeper";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ehrpwm0b_pins>;
-+ pwms = <&ehrpwm0 1 1000000 0>;
-+ amp-supply = <&>;
-+ };
-+
- /*
- * This is a 5V current limiting regulator that is shared by USB,
- * the sensor (input) ports, the motor (output) ports and the A/DC.
-@@ -152,6 +160,18 @@
- regulator-boot-on;
- vin-supply = <&vcc5v>;
- };
-+
-+ /*
-+ * This is the amplifier for the speaker.
-+ */
-+ amp: regulator3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&_pins>;
-+ compatible = "regulator-fixed";
-+ regulator-name = "amp";
-+ gpio = <&gpio 111 GPIO_ACTIVE_HIGH>;
-+ enable-active-high;
-+ };
- };
-
- &pmx_core {
-@@ -208,6 +228,13 @@
- 0x4c 0x00008000 0x0000f000
- >;
- };
-+
-+ amp_pins: pinmux_amp_pins {
-+ pinctrl-single,bits = <
-+ /* GP6[15] */
-+ 0x34 0x00000008 0x0000000f
-+ >;
-+ };
- };
-
- &pinconf {
-@@ -316,6 +343,10 @@
- };
- };
-
-+&ehrpwm0 {
-+ status = "okay";
-+};
-+
- &gpio {
- status = "okay";
- };
---
-cgit v1.1
-
--- /dev/null
+From cdd8d11858fa34f6e813fae46b5556e9fb3570dc Mon Sep 17 00:00:00 2001
+From: David Lechner <david@lechnology.com>
+Date: Sun, 19 Nov 2017 19:54:32 -0600
+Subject: [PATCH] configs: legoev3: increase flash image sizes
+
+This increases the kernel image to 4M and the rootfs image to 10M.
+
+It is getting hard to get a kernel image to fit in 3M and the rootfs image
+size now matches the filesyssize variable.
+
+Signed-off-by: David Lechner <david@lechnology.com>
+---
+ include/configs/legoev3.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h
+index 79fa3c4..2eeaf85 100644
+--- a/include/configs/legoev3.h
++++ b/include/configs/legoev3.h
+@@ -204,7 +204,7 @@
+ "mmcargs=setenv bootargs mem=${memsize} console=${console} root=/dev/mmcblk0p2 rw rootwait lpj=747520\0" \
+ "mmcboot=bootm ${loadaddr}\0" \
+ "flashargs=setenv bootargs mem=${memsize} initrd=${filesysaddr},${filesyssize} root=/dev/ram0 rw rootfstype=squashfs console=${console} lpj=747520\0" \
+- "flashboot=sf probe 0; sf read ${loadaddr} 0x50000 0x300000; sf read ${filesysaddr} 0x350000 0x960000; bootm ${loadaddr}\0" \
++ "flashboot=sf probe 0; sf read ${loadaddr} 0x50000 0x400000; sf read ${filesysaddr} 0x450000 0xA00000; bootm ${loadaddr}\0" \
+ "loadimage=fatload mmc 0 ${loadaddr} uImage\0" \
+ "loadbootscr=fatload mmc 0 ${bootscraddr} boot.scr\0" \
+ "bootscript=source ${bootscraddr}\0" \
+--
+2.7.4
+
BR2_TARGET_GENERIC_GETTY=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyS1"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/lego/ev3/post-image.sh"
-# Linux headers same as kernel, a 4.11 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
+# Linux headers same as kernel, a 4.14 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14"
BR2_LINUX_KERNEL_DEFCONFIG="davinci_all"
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/lego/ev3/linux.fragment"
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0xc0008000"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.05"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="legoev3"
# host
projects / buildroot.git / commitdiff