-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+# Makefile.in generated automatically by automake 1.4a from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_FLAG =
transform = @program_transform_name@
NORMAL_INSTALL = :
HOSTING_EMU = -m $(EMUL)
# Setup the testing framework, if you have one
-EXPECT = `if [ -f $$r/../expect/expect ] ; \
- then echo $$r/../expect/expect ; \
- else echo expect ; fi`
+EXPECT = `if [ -f $$r/../expect/expect ] ; then echo $$r/../expect/expect ; else echo expect ; fi`
-RUNTEST = `if [ -f $${srcroot}/../dejagnu/runtest ] ; \
- then echo $${srcroot}/../dejagnu/runtest ; \
- else echo runtest ; fi`
+RUNTEST = `if [ -f $${srcroot}/../dejagnu/runtest ] ; then echo $${srcroot}/../dejagnu/runtest ; else echo runtest ; fi`
RUNTESTFLAGS =
-CC_FOR_TARGET = ` \
- if [ -f $$r/../gcc/xgcc ] ; then \
- if [ -f $$r/../newlib/Makefile ] ; then \
- echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
- else \
- echo $$r/../gcc/xgcc -B$$r/../gcc/; \
- fi; \
- else \
- if [ "@host@" = "@target@" ] ; then \
- echo $(CC); \
- else \
- echo gcc | sed '$(transform)'; \
- fi; \
- fi`
+CC_FOR_TARGET = ` if [ -f $$r/../gcc/xgcc ] ; then if [ -f $$r/../newlib/Makefile ] ; then echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; else echo $$r/../gcc/xgcc -B$$r/../gcc/; fi; else if [ "@host@" = "@target@" ] ; then echo $(CC); else echo gcc | sed '$(transform)'; fi; fi`
CXX = gcc
-CXX_FOR_TARGET = ` \
- if [ -f $$r/../gcc/xgcc ] ; then \
- if [ -f $$r/../newlib/Makefile ] ; then \
- echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
- else \
- echo $$r/../gcc/xgcc -B$$r/../gcc/; \
- fi; \
- else \
- if [ "@host@" = "@target@" ] ; then \
- echo $(CXX); \
- else \
- echo gcc | sed '$(transform)'; \
- fi; \
- fi`
+CXX_FOR_TARGET = ` if [ -f $$r/../gcc/xgcc ] ; then if [ -f $$r/../newlib/Makefile ] ; then echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; else echo $$r/../gcc/xgcc -B$$r/../gcc/; fi; else if [ "@host@" = "@target@" ] ; then echo $(CXX); else echo gcc | sed '$(transform)'; fi; fi`
noinst_PROGRAMS = ld-new
BFDLIB = ../bfd/libbfd.la
LIBIBERTY = ../libiberty/libiberty.a
-ALL_EMULATIONS = \
- ea29k.o \
- eaixppc.o \
- eaixrs6.o \
- ealpha.o \
- earcelf.o \
- earmelf.o \
- earmelf_oabi.o \
- earmelf_linux.o \
- earmelf_linux26.o \
- earmaoutb.o \
- earmaoutl.o \
- earmcoff.o \
- earmnbsd.o \
- earmpe.o \
- earm_epoc_pe.o \
- eavr1200.o \
- eavr23xx.o \
- eavr44x4.o \
- eavr4433.o \
- eavr85xx.o \
- eavrmega603.o \
- eavrmega103.o \
- eavrmega161.o \
- ecoff_sparc.o \
- ed10velf.o \
- ed30velf.o \
- ed30v_e.o \
- ed30v_o.o \
- edelta68.o \
- eebmon29k.o \
- eelf32_sparc.o \
- eelf32_i960.o \
- eelf32b4300.o \
- eelf32bmip.o \
- eelf32ebmip.o \
- eelf32elmip.o \
- eelf32bmipn32.o \
- eelf32i370.o \
- eelf32l4300.o \
- eelf32lmip.o \
- eelf32lppc.o \
- eelf32ppc.o \
- eelf32ppclinux.o \
- eelf_i386.o \
- eelf_i386_be.o \
- egld960.o \
- egld960coff.o \
- eelf32fr30.o \
- eelf32mcore.o \
- eh8300.o \
- eh8300h.o \
- eh8300s.o \
- eh8500.o \
- eh8500b.o \
- eh8500c.o \
- eh8500m.o \
- eh8500s.o \
- ehp300bsd.o \
- ehp3hpux.o \
- ei386aout.o \
- ei386beos.o \
- ei386bsd.o \
- ei386coff.o \
- ei386go32.o \
- ei386linux.o \
- ei386lynx.o \
- ei386mach.o \
- ei386moss.o \
- ei386msdos.o \
- ei386nbsd.o \
- ei386nw.o \
- ei386pe.o \
- ei386pe_posix.o \
- elnk960.o \
- em68k4knbsd.o \
- em68kaout.o \
- em68kaux.o \
- em68kcoff.o \
- em68kelf.o \
- em68klinux.o \
- em68klynx.o \
- em68knbsd.o \
- em68kpsos.o \
- em88kbcs.o \
- emcorepe.o \
- emipsbig.o \
- emipsbsd.o \
- emipsidt.o \
- emipsidtl.o \
- emipslit.o \
- emipslnews.o \
- emipspe.o \
- enews.o \
- epjelf.o \
- epjlelf.o \
- ens32knbsd.o \
- epc532macha.o \
- eppcmacos.o \
- eppcnw.o \
- eppcpe.o \
- eriscix.o \
- esa29200.o \
- esh.o \
- eshelf.o \
- eshlelf.o \
- eshl.o \
- eshpe.o \
- esparcaout.o \
- esparclinux.o \
- esparclynx.o \
- esparcnbsd.o \
- est2000.o \
- esun3.o \
- esun4.o \
- etic30aout.o \
- etic30coff.o \
- etic80coff.o \
- evanilla.o \
- evax.o \
- evsta.o \
- ew65.o \
- ez8001.o \
- ez8002.o
-
-
-ALL_64_EMULATIONS = \
- eelf64_sparc.o \
- eelf64alpha.o \
- eelf64bmip.o
-
-
-ALL_EMUL_EXTRA_OFILES = \
- pe-dll.o \
- deffilep.o
-
-
-CFILES = ldctor.c ldemul.c ldexp.c ldfile.c ldlang.c \
- ldmain.c ldmisc.c ldver.c ldwrite.c lexsup.c \
- mri.c ldcref.c pe-dll.c
-
-
-HFILES = ld.h ldctor.h ldemul.h ldexp.h ldfile.h \
- ldlang.h ldlex.h ldmain.h ldmisc.h ldver.h \
- ldwrite.h mri.h deffile.h pe-dll.h
+ALL_EMULATIONS = ea29k.o eaixppc.o eaixrs6.o ealpha.o earcelf.o earmelf.o earmelf_oabi.o earmelf_linux.o earmelf_linux26.o earmaoutb.o earmaoutl.o earmcoff.o earmnbsd.o earmpe.o earm_epoc_pe.o eavr1200.o eavr23xx.o eavr44x4.o eavr4433.o eavr85xx.o eavrmega603.o eavrmega103.o eavrmega161.o ecoff_sparc.o ed10velf.o ed30velf.o ed30v_e.o ed30v_o.o edelta68.o eebmon29k.o eelf32_sparc.o eelf32_i960.o eelf32b4300.o eelf32bmip.o eelf32ebmip.o eelf32elmip.o eelf32bmipn32.o eelf32i370.o eelf32l4300.o eelf32lmip.o eelf32lppc.o eelf32lppcsim.o eelf32ppc.o eelf32ppcsim.o eelf32ppclinux.o eelf_i386.o eelf_i386_be.o egld960.o egld960coff.o eelf32fr30.o eelf32mcore.o eh8300.o eh8300h.o eh8300s.o eh8500.o eh8500b.o eh8500c.o eh8500m.o eh8500s.o ehp300bsd.o ehp3hpux.o ei386aout.o ei386beos.o ei386bsd.o ei386coff.o ei386go32.o ei386linux.o ei386lynx.o ei386mach.o ei386moss.o ei386msdos.o ei386nbsd.o ei386nw.o ei386pe.o ei386pe_posix.o elnk960.o em68k4knbsd.o em68kaout.o em68kaux.o em68kcoff.o em68kelf.o em68klinux.o em68klynx.o em68knbsd.o em68kpsos.o em88kbcs.o emcorepe.o emipsbig.o emipsbsd.o emipsidt.o emipsidtl.o emipslit.o emipslnews.o emipspe.o enews.o epjelf.o epjlelf.o ens32knbsd.o epc532macha.o eppcmacos.o eppcnw.o eppcpe.o eriscix.o esa29200.o esh.o eshelf.o eshlelf.o eshl.o eshpe.o esparcaout.o esparclinux.o esparclynx.o esparcnbsd.o est2000.o esun3.o esun4.o etic30aout.o etic30coff.o etic80coff.o evanilla.o evax.o evsta.o ew65.o ez8001.o ez8002.o
+
+
+ALL_64_EMULATIONS = eelf64_sparc.o eelf64alpha.o eelf64bmip.o
+
+
+ALL_EMUL_EXTRA_OFILES = pe-dll.o deffilep.o
+
+
+CFILES = ldctor.c ldemul.c ldexp.c ldfile.c ldlang.c ldmain.c ldmisc.c ldver.c ldwrite.c lexsup.c mri.c ldcref.c pe-dll.c
+
+
+HFILES = ld.h ldctor.h ldemul.h ldexp.h ldfile.h ldlang.h ldlex.h ldmain.h ldmisc.h ldver.h ldwrite.h mri.h deffile.h pe-dll.h
GENERATED_CFILES = ldgram.c ldlex.c deffilep.c
GENERATED_HFILES = ldgram.h ldemul-list.h deffilep.h
-OFILES = ldgram.o ldlex.o lexsup.o ldlang.o mri.o ldctor.o ldmain.o \
- ldwrite.o ldexp.o ldemul.o ldver.o ldmisc.o \
- ldfile.o ldcref.o ${EMULATION_OFILES} ${EMUL_EXTRA_OFILES}
+OFILES = ldgram.o ldlex.o lexsup.o ldlang.o mri.o ldctor.o ldmain.o ldwrite.o ldexp.o ldemul.o ldver.o ldmisc.o ldfile.o ldcref.o ${EMULATION_OFILES} ${EMUL_EXTRA_OFILES}
STAGESTUFF = *.o ldscripts/* e*.c
GENSCRIPTS = $(SHELL) $(srcdir)/genscripts.sh ${srcdir} ${libdir} @host@ @target@ @target_alias@ "@EMULATION_LIBPATH@" "@NATIVE_LIB_DIRS@"
GEN_DEPENDS = $(srcdir)/genscripts.sh stringify.sed
-ld_new_SOURCES = ldgram.y ldlex.l lexsup.c ldlang.c mri.c ldctor.c ldmain.c \
- ldwrite.c ldexp.c ldemul.c ldver.c ldmisc.c ldfile.c ldcref.c
+ld_new_SOURCES = ldgram.y ldlex.l lexsup.c ldlang.c mri.c ldctor.c ldmain.c ldwrite.c ldexp.c ldemul.c ldver.c ldmisc.c ldfile.c ldcref.c
ld_new_DEPENDENCIES = $(EMULATION_OFILES) $(EMUL_EXTRA_OFILES) $(BFDLIB) $(LIBIBERTY) $(INTLDEPS)
ld_new_LDADD = $(EMULATION_OFILES) $(EMUL_EXTRA_OFILES) $(BFDLIB) $(LIBIBERTY) $(INTLLIBS)
MAINTAINERCLEANFILES = ldver.texi
-MOSTLYCLEANFILES = $(STAGESTUFF) ld1$(EXEEXT) ld2$(EXEEXT) ld3$(EXEEXT) \
- ldemul-list.h crtbegin.o crtend.o ld.log ld.sum
+MOSTLYCLEANFILES = $(STAGESTUFF) ld1$(EXEEXT) ld2$(EXEEXT) ld3$(EXEEXT) ldemul-list.h crtbegin.o crtend.o ld.log ld.sum
CLEANFILES = dep.sed DEP DEP1 DEP2
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-TAR = tar
+TAR = gtar
GZIP_ENV = --best
SOURCES = $(ld_new_SOURCES)
OBJECTS = $(ld_new_OBJECTS)
all-am: Makefile $(PROGRAMS) $(MANS) config.h
all-redirect: all-recursive-am
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_STRIP_FLAG=-s install
installdirs: installdirs-recursive
installdirs-am:
$(mkinstalldirs) $(DESTDIR)$(mandir)/man1
$(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
${GENSCRIPTS} elf32lmip "$(tdir_elf32lmip)"
eelf32lppc.c: $(srcdir)/emulparams/elf32lppc.sh \
- $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elfppc.sc ${GEN_DEPENDS}
+ $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
${GENSCRIPTS} elf32lppc "$(tdir_elf32lppc)"
+eelf32lppcsim.c: $(srcdir)/emulparams/elf32lppcsim.sh \
+ $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ ${GENSCRIPTS} elf32lppcsim "$(tdir_elf32lppcsim)"
eelf32lsmip.c: $(srcdir)/emulparams/elf32lsmip.sh \
$(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
${GENSCRIPTS} elf32lsmip "$(tdir_elf32lsmip)"
eelf32ppc.c: $(srcdir)/emulparams/elf32ppc.sh \
- $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elfppc.sc ${GEN_DEPENDS}
+ $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
${GENSCRIPTS} elf32ppc "$(tdir_elf32ppc)"
+eelf32ppcsim.c: $(srcdir)/emulparams/elf32ppcsim.sh \
+ $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
+ ${GENSCRIPTS} elf32ppcsim "$(tdir_elf32ppcsim)"
eelf32ppclinux.c: $(srcdir)/emulparams/elf32ppclinux.sh \
- $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elfppc.sc ${GEN_DEPENDS}
+ $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
${GENSCRIPTS} elf32ppclinux "$(tdir_elf32ppclinux)"
eelf32i370.c: $(srcdir)/emulparams/elf32i370.sh \
$(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elfi370.sc ${GEN_DEPENDS}
+++ /dev/null
-#
-# Unusual variables checked by this code:
-# NOP - two byte opcode for no-op (defaults to 0)
-# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
-# OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
-# (e.g., .PARISC.milli)
-# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
-# (e.g., .PARISC.global)
-# OTHER_SECTIONS - at the end
-# EXECUTABLE_SYMBOLS - symbols that must be defined for an
-# executable (e.g., _DYNAMIC_LINK)
-# TEXT_START_SYMBOLS - symbols that appear at the start of the
-# .text section.
-# DATA_START_SYMBOLS - symbols that appear at the start of the
-# .data section.
-# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
-# .bss section besides __bss_start.
-#
-# When adding sections, do note that the names of some sections are used
-# when specifying the start address of the next.
-#
-test -z "$ENTRY" && ENTRY=_start
-test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
-test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
-test "$LD_FLAG" = "N" && DATA_ADDR=.
-SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2) }"
-SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2) }"
-INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
-PLT=".plt ${RELOCATING-0} : { *(.plt) }"
-CTOR=".ctors ${CONSTRUCTING-0} :
- {
- ${CONSTRUCTING+${CTOR_START}}
- /* gcc uses crtbegin.o to find the start of
- the constructors, so we make sure it is
- first. Because this is a wildcard, it
- doesn't matter if the user does not
- actually link against crtbegin.o; the
- linker won't look for a file to match a
- wildcard. The wildcard also means that it
- doesn't matter which directory crtbegin.o
- is in. */
-
- KEEP (*crtbegin.o(.ctors))
-
- /* We don't want to include the .ctor section from
- from the crtend.o file until after the sorted ctors.
- The .ctor section from the crtend file contains the
- end of ctors marker and it must be last */
-
- KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
- KEEP (*(SORT(.ctors.*)))
- KEEP (*(.ctors))
- ${CONSTRUCTING+${CTOR_END}}
- }"
-
-DTOR=" .dtors ${CONSTRUCTING-0} :
- {
- ${CONSTRUCTING+${DTOR_START}}
- KEEP (*crtbegin.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
- KEEP (*(SORT(.dtors.*)))
- KEEP (*(.dtors))
- ${CONSTRUCTING+${DTOR_END}}
- }"
-
-cat <<EOF
-OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
- "${LITTLE_OUTPUT_FORMAT}")
-OUTPUT_ARCH(${ARCH})
-ENTRY(${ENTRY})
-
-${RELOCATING+${LIB_SEARCH_DIRS}}
-${RELOCATING+/* Do we need any of these for elf?
- __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
-${RELOCATING+${EXECUTABLE_SYMBOLS}}
-${RELOCATING- /* For some reason, the Solaris linker makes bad executables
- if gld -r is used and the intermediate file has sections starting
- at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
- bug. But for now assigning the zero vmas works. */}
-
-${RELOCATING+PROVIDE (__stack = 0);}
-${RELOCATING+PROVIDE (___stack = 0);}
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- ${CREATE_SHLIB-${RELOCATING+. = ${TEXT_START_ADDR} + SIZEOF_HEADERS;}}
- ${CREATE_SHLIB+${RELOCATING+. = SIZEOF_HEADERS;}}
- ${CREATE_SHLIB-${INTERP}}
- .hash ${RELOCATING-0} : { *(.hash) }
- .dynsym ${RELOCATING-0} : { *(.dynsym) }
- .dynstr ${RELOCATING-0} : { *(.dynstr) }
- .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
- .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) }
- .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) }
- .rela.text ${RELOCATING-0} :
- {
- *(.rela.text)
- ${RELOCATING+*(.rela.text.*)}
- ${RELOCATING+*(.rela.gnu.linkonce.t*)}
- }
- .rela.data ${RELOCATING-0} :
- {
- *(.rela.data)
- ${RELOCATING+*(.rela.data.*)}
- ${RELOCATING+*(.rela.gnu.linkonce.d*)}
- }
- .rela.rodata ${RELOCATING-0} :
- {
- *(.rela.rodata)
- ${RELOCATING+*(.rela.rodata.*)}
- ${RELOCATING+*(.rela.gnu.linkonce.r*)}
- }
- .rela.got ${RELOCATING-0} : { *(.rela.got) }
- .rela.got1 ${RELOCATING-0} : { *(.rela.got1) }
- .rela.got2 ${RELOCATING-0} : { *(.rela.got2) }
- .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
- .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
- .rela.init ${RELOCATING-0} : { *(.rela.init) }
- .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
- .rela.bss ${RELOCATING-0} : { *(.rela.bss) }
- .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
- .rela.sdata ${RELOCATING-0} : { *(.rela.sdata) }
- .rela.sbss ${RELOCATING-0} : { *(.rela.sbss) }
- .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2) }
- .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2) }
- .text ${RELOCATING-0} :
- {
- ${RELOCATING+${TEXT_START_SYMBOLS}}
- *(.text)
- ${RELOCATING+*(.text.*)}
- /* .gnu.warning sections are handled specially by elf32.em. */
- *(.gnu.warning)
- ${RELOCATING+*(.gnu.linkonce.t*)}
- } =${NOP-0}
- .init ${RELOCATING-0} : { KEEP (*(.init)) } =${NOP-0}
- .fini ${RELOCATING-0} : { KEEP (*(.fini)) } =${NOP-0}
- .rodata ${RELOCATING-0} :
- {
- *(.rodata)
- ${RELOCATING+*(.rodata.*)}
- ${RELOCATING+*(.gnu.linkonce.r*)}
- }
- .rodata1 ${RELOCATING-0} : { *(.rodata1) }
- ${RELOCATING+_etext = .;}
- ${RELOCATING+PROVIDE (etext = .);}
- ${RELOCATING+PROVIDE (__etext = .);}
- ${CREATE_SHLIB-${SDATA2}}
- ${CREATE_SHLIB-${SBSS2}}
- ${RELOCATING+${OTHER_READONLY_SECTIONS}}
-
- /* Adjust the address for the data segment. We want to adjust up to
- the same address within the page on the next page up. It would
- be more correct to do this:
- ${RELOCATING+. = ${DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (ALIGN(8) & (${MAXPAGESIZE} - 1))};}
- The current expression does not correctly handle the case of a
- text segment ending precisely at the end of a page; it causes the
- data segment to skip a page. The above expression does not have
- this problem, but it will currently (2/95) cause BFD to allocate
- a single segment, combining both text and data, for this case.
- This will prevent the text segment from being shared among
- multiple executions of the program; I think that is more
- important than losing a page of the virtual address space (note
- that no actual memory is lost; the page which is skipped can not
- be referenced). */
- ${RELOCATING+. = ${DATA_ADDR- ALIGN(8) + ${MAXPAGESIZE}};}
-
- .data ${RELOCATING-0} :
- {
- ${RELOCATING+${DATA_START_SYMBOLS}}
- *(.data)
- ${RELOCATING+*(.data.*)}
- ${RELOCATING+*(.gnu.linkonce.d*)}
- ${CONSTRUCTING+CONSTRUCTORS}
- }
- .data1 ${RELOCATING-0} : { *(.data1) }
- ${RELOCATING+${OTHER_READWRITE_SECTIONS}}
-
- .got1 ${RELOCATING-0} : { *(.got1) }
- .dynamic ${RELOCATING-0} : { *(.dynamic) }
-
- /* Put .ctors and .dtors next to the .got2 section, so that the pointers
- get relocated with -mrelocatable. Also put in the .fixup pointers.
- The current compiler no longer needs this, but keep it around for 2.7.2 */
-
- ${RELOCATING+PROVIDE (_GOT2_START_ = .);}
- ${RELOCATING+PROVIDE (__GOT2_START_ = .);}
- .got2 ${RELOCATING-0} : { *(.got2) }
-
- ${RELOCATING+PROVIDE (__CTOR_LIST__ = .);}
- ${RELOCATING+PROVIDE (___CTOR_LIST__ = .);}
- ${RELOCATING+${CTOR}}
- ${RELOCATING+PROVIDE (__CTOR_END__ = .);}
- ${RELOCATING+PROVIDE (___CTOR_END__ = .);}
-
- ${RELOCATING+PROVIDE (__DTOR_LIST__ = .);}
- ${RELOCATING+PROVIDE (___DTOR_LIST__ = .);}
- ${RELOCATING+${DTOR}}
- ${RELOCATING+PROVIDE (__DTOR_END__ = .);}
- ${RELOCATING+PROVIDE (___DTOR_END__ = .);}
-
- ${RELOCATING+PROVIDE (_FIXUP_START_ = .);}
- ${RELOCATING+PROVIDE (__FIXUP_START_ = .);}
- .fixup ${RELOCATING-0} : { *(.fixup) }
- ${RELOCATING+PROVIDE (_FIXUP_END_ = .);}
- ${RELOCATING+PROVIDE (__FIXUP_END_ = .);}
- ${RELOCATING+PROVIDE (_GOT2_END_ = .);}
- ${RELOCATING+PROVIDE (__GOT2_END_ = .);}
-
- ${RELOCATING+PROVIDE (_GOT_START_ = .);}
- ${RELOCATING+PROVIDE (__GOT_START_ = .);}
- .got ${RELOCATING-0} : { *(.got) }
- .got.plt ${RELOCATING-0} : { *(.got.plt) }
- ${CREATE_SHLIB+${SDATA2}}
- ${CREATE_SHLIB+${SBSS2}}
- ${RELOCATING+PROVIDE (_GOT_END_ = .);}
- ${RELOCATING+PROVIDE (__GOT_END_ = .);}
-
- /* We want the small data sections together, so single-instruction offsets
- can access them all, and initialized data all before uninitialized, so
- we can shorten the on-disk segment size. */
- .sdata ${RELOCATING-0} : { *(.sdata) }
- ${RELOCATING+_edata = .;}
- ${RELOCATING+PROVIDE (edata = .);}
- ${RELOCATING+PROVIDE (__edata = .);}
- .sbss ${RELOCATING-0} :
- {
- ${RELOCATING+PROVIDE (__sbss_start = .);}
- ${RELOCATING+PROVIDE (___sbss_start = .);}
- *(.sbss)
- *(.scommon)
- *(.dynsbss)
- ${RELOCATING+PROVIDE (__sbss_end = .);}
- ${RELOCATING+PROVIDE (___sbss_end = .);}
- }
- ${PLT}
- .bss ${RELOCATING-0} :
- {
- ${RELOCATING+${OTHER_BSS_SYMBOLS}}
- ${RELOCATING+PROVIDE (__bss_start = .);}
- ${RELOCATING+PROVIDE (___bss_start = .);}
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- ${RELOCATING+_end = . ;}
- ${RELOCATING+PROVIDE (end = .);}
- ${RELOCATING+PROVIDE (__end = .);}
-
- /* These are needed for ELF backends which have not yet been
- converted to the new style linker. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
-
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
-
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
-
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
-
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
-
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
-
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
-
- /* These must appear regardless of ${RELOCATING}. */
- ${OTHER_SECTIONS}
-}
-EOF
projects / binutils-gdb.git / commitdiff