$(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH):$(TARGET_LIB_PATH):$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR);
# This is the list of directories to be built for the build system.
-BUILD_CONFIGDIRS = libiberty libbanshee
+BUILD_CONFIGDIRS = libiberty
# Build programs are put under this directory.
BUILD_SUBDIR = @build_subdir@
# This is set by the configure script to the arguments to use when configuring
maybe-configure-ld \
maybe-configure-libcpp \
maybe-configure-libgui \
- maybe-configure-libbanshee \
maybe-configure-libiberty \
maybe-configure-libtool \
maybe-configure-m4 \
maybe-all-ld \
maybe-all-libcpp \
maybe-all-libgui \
- maybe-all-libbanshee \
maybe-all-libiberty \
maybe-all-libtool \
maybe-all-m4 \
maybe-info-ld \
maybe-info-libcpp \
maybe-info-libgui \
- maybe-info-libbanshee \
maybe-info-libiberty \
maybe-info-libtool \
maybe-info-m4 \
maybe-dvi-ld \
maybe-dvi-libcpp \
maybe-dvi-libgui \
- maybe-dvi-libbanshee \
maybe-dvi-libiberty \
maybe-dvi-libtool \
maybe-dvi-m4 \
maybe-TAGS-ld \
maybe-TAGS-libcpp \
maybe-TAGS-libgui \
- maybe-TAGS-libbanshee \
maybe-TAGS-libiberty \
maybe-TAGS-libtool \
maybe-TAGS-m4 \
maybe-install-info-ld \
maybe-install-info-libcpp \
maybe-install-info-libgui \
- maybe-install-info-libbanshee \
maybe-install-info-libiberty \
maybe-install-info-libtool \
maybe-install-info-m4 \
maybe-installcheck-ld \
maybe-installcheck-libcpp \
maybe-installcheck-libgui \
- maybe-installcheck-libbanshee \
maybe-installcheck-libiberty \
maybe-installcheck-libtool \
maybe-installcheck-m4 \
maybe-mostlyclean-ld \
maybe-mostlyclean-libcpp \
maybe-mostlyclean-libgui \
- maybe-mostlyclean-libbanshee \
maybe-mostlyclean-libiberty \
maybe-mostlyclean-libtool \
maybe-mostlyclean-m4 \
maybe-clean-ld \
maybe-clean-libcpp \
maybe-clean-libgui \
- maybe-clean-libbanshee \
maybe-clean-libiberty \
maybe-clean-libtool \
maybe-clean-m4 \
maybe-distclean-ld \
maybe-distclean-libcpp \
maybe-distclean-libgui \
- maybe-distclean-libbanshee \
maybe-distclean-libiberty \
maybe-distclean-libtool \
maybe-distclean-m4 \
maybe-maintainer-clean-ld \
maybe-maintainer-clean-libcpp \
maybe-maintainer-clean-libgui \
- maybe-maintainer-clean-libbanshee \
maybe-maintainer-clean-libiberty \
maybe-maintainer-clean-libtool \
maybe-maintainer-clean-m4 \
maybe-check-ld \
maybe-check-libcpp \
maybe-check-libgui \
- maybe-check-libbanshee \
maybe-check-libiberty \
maybe-check-libtool \
maybe-check-m4 \
maybe-install-ld \
maybe-install-libcpp \
maybe-install-libgui \
- maybe-install-libbanshee \
maybe-install-libiberty \
maybe-install-libtool \
maybe-install-m4 \
maybe-install-ld \
maybe-install-libcpp \
maybe-install-libgui \
- maybe-install-libbanshee \
maybe-install-libiberty \
maybe-install-libtool \
maybe-install-m4 \
@endif libgui
-.PHONY: configure-libbanshee maybe-configure-libbanshee
-maybe-configure-libbanshee:
-@if libbanshee
-maybe-configure-libbanshee: configure-libbanshee
-configure-libbanshee:
- @test -f stage_last && exit 0; \
- test ! -f libbanshee/Makefile || exit 0; \
- [ -d libbanshee ] || mkdir libbanshee; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(HOST_EXPORTS) \
- echo Configuring in libbanshee; \
- cd libbanshee || exit 1; \
- case $(srcdir) in \
- \.) \
- srcdiroption="--srcdir=."; \
- libsrcdir=".";; \
- /* | [A-Za-z]:[\\/]*) \
- srcdiroption="--srcdir=$(srcdir)/libbanshee"; \
- libsrcdir="$$s/libbanshee";; \
- *) \
- srcdiroption="--srcdir=../$(srcdir)/libbanshee"; \
- libsrcdir="$$s/libbanshee";; \
- esac; \
- $(SHELL) $${libsrcdir}/configure \
- $(HOST_CONFIGARGS) $${srcdiroption} \
- || exit 1
-@endif libbanshee
-
-.PHONY: all-libbanshee maybe-all-libbanshee
-maybe-all-libbanshee:
-@if libbanshee
-maybe-all-libbanshee: all-libbanshee
-all-libbanshee: configure-libbanshee
- @test -f stage_last && exit 0; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
- $(HOST_EXPORTS) \
- (cd libbanshee && $(MAKE) $(FLAGS_TO_PASS) all)
-@endif libbanshee
-
-.PHONY: check-libbanshee maybe-check-libbanshee
-maybe-check-libbanshee:
-@if libbanshee
-maybe-check-libbanshee: check-libbanshee
-
-check-libbanshee:
- @r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
- $(HOST_EXPORTS) \
- (cd libbanshee && $(MAKE) $(FLAGS_TO_PASS) check)
-
-@endif libbanshee
-
-.PHONY: install-libbanshee maybe-install-libbanshee
-maybe-install-libbanshee:
-@if libbanshee
-maybe-install-libbanshee: install-libbanshee
-
-install-libbanshee:
-
-@endif libbanshee
-
-# Other targets (info, dvi, etc.)
-
-.PHONY: maybe-info-libbanshee info-libbanshee
-maybe-info-libbanshee:
-@if libbanshee
-maybe-info-libbanshee: info-libbanshee
-
-info-libbanshee: \
- configure-libbanshee
- @[ -f ./libbanshee/Makefile ] || exit 0; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
- $(HOST_EXPORTS) \
- for flag in $(EXTRA_HOST_FLAGS) ; do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
- done; \
- echo "Doing info in libbanshee" ; \
- (cd libbanshee && \
- $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
- "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
- "RANLIB=$${RANLIB}" \
- "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- info) \
- || exit 1
-
-@endif libbanshee
-
-.PHONY: maybe-dvi-libbanshee dvi-libbanshee
-maybe-dvi-libbanshee:
-@if libbanshee
-maybe-dvi-libbanshee: dvi-libbanshee
-
-dvi-libbanshee: \
- configure-libbanshee
- @[ -f ./libbanshee/Makefile ] || exit 0; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
- $(HOST_EXPORTS) \
- for flag in $(EXTRA_HOST_FLAGS) ; do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
- done; \
- echo "Doing dvi in libbanshee" ; \
- (cd libbanshee && \
- $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
- "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
- "RANLIB=$${RANLIB}" \
- "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- dvi) \
- || exit 1
-
-@endif libbanshee
-
-.PHONY: maybe-TAGS-libbanshee TAGS-libbanshee
-maybe-TAGS-libbanshee:
-@if libbanshee
-maybe-TAGS-libbanshee: TAGS-libbanshee
-
-TAGS-libbanshee: \
- configure-libbanshee
- @[ -f ./libbanshee/Makefile ] || exit 0; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
- $(HOST_EXPORTS) \
- for flag in $(EXTRA_HOST_FLAGS) ; do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
- done; \
- echo "Doing TAGS in libbanshee" ; \
- (cd libbanshee && \
- $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
- "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
- "RANLIB=$${RANLIB}" \
- "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- TAGS) \
- || exit 1
-
-@endif libbanshee
-
-.PHONY: maybe-install-info-libbanshee install-info-libbanshee
-maybe-install-info-libbanshee:
-@if libbanshee
-maybe-install-info-libbanshee: install-info-libbanshee
-
-install-info-libbanshee: \
- configure-libbanshee \
- info-libbanshee
- @[ -f ./libbanshee/Makefile ] || exit 0; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
- $(HOST_EXPORTS) \
- for flag in $(EXTRA_HOST_FLAGS) ; do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
- done; \
- echo "Doing install-info in libbanshee" ; \
- (cd libbanshee && \
- $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
- "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
- "RANLIB=$${RANLIB}" \
- "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- install-info) \
- || exit 1
-
-@endif libbanshee
-
-.PHONY: maybe-installcheck-libbanshee installcheck-libbanshee
-maybe-installcheck-libbanshee:
-@if libbanshee
-maybe-installcheck-libbanshee: installcheck-libbanshee
-
-installcheck-libbanshee: \
- configure-libbanshee
- @[ -f ./libbanshee/Makefile ] || exit 0; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
- $(HOST_EXPORTS) \
- for flag in $(EXTRA_HOST_FLAGS) ; do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
- done; \
- echo "Doing installcheck in libbanshee" ; \
- (cd libbanshee && \
- $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
- "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
- "RANLIB=$${RANLIB}" \
- "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- installcheck) \
- || exit 1
-
-@endif libbanshee
-
-.PHONY: maybe-mostlyclean-libbanshee mostlyclean-libbanshee
-maybe-mostlyclean-libbanshee:
-@if libbanshee
-maybe-mostlyclean-libbanshee: mostlyclean-libbanshee
-
-mostlyclean-libbanshee:
- @[ -f ./libbanshee/Makefile ] || exit 0; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
- $(HOST_EXPORTS) \
- for flag in $(EXTRA_HOST_FLAGS) ; do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
- done; \
- echo "Doing mostlyclean in libbanshee" ; \
- (cd libbanshee && \
- $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
- "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
- "RANLIB=$${RANLIB}" \
- "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- mostlyclean) \
- || exit 1
-
-@endif libbanshee
-
-.PHONY: maybe-clean-libbanshee clean-libbanshee
-maybe-clean-libbanshee:
-@if libbanshee
-maybe-clean-libbanshee: clean-libbanshee
-
-clean-libbanshee:
- @[ -f ./libbanshee/Makefile ] || exit 0; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
- $(HOST_EXPORTS) \
- for flag in $(EXTRA_HOST_FLAGS) ; do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
- done; \
- echo "Doing clean in libbanshee" ; \
- (cd libbanshee && \
- $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
- "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
- "RANLIB=$${RANLIB}" \
- "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- clean) \
- || exit 1
-
-@endif libbanshee
-
-.PHONY: maybe-distclean-libbanshee distclean-libbanshee
-maybe-distclean-libbanshee:
-@if libbanshee
-maybe-distclean-libbanshee: distclean-libbanshee
-
-distclean-libbanshee:
- @[ -f ./libbanshee/Makefile ] || exit 0; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
- $(HOST_EXPORTS) \
- for flag in $(EXTRA_HOST_FLAGS) ; do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
- done; \
- echo "Doing distclean in libbanshee" ; \
- (cd libbanshee && \
- $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
- "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
- "RANLIB=$${RANLIB}" \
- "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- distclean) \
- || exit 1
-
-@endif libbanshee
-
-.PHONY: maybe-maintainer-clean-libbanshee maintainer-clean-libbanshee
-maybe-maintainer-clean-libbanshee:
-@if libbanshee
-maybe-maintainer-clean-libbanshee: maintainer-clean-libbanshee
-
-maintainer-clean-libbanshee:
- @[ -f ./libbanshee/Makefile ] || exit 0; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(SET_LIB_PATH) \
- $(HOST_EXPORTS) \
- for flag in $(EXTRA_HOST_FLAGS) ; do \
- eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
- done; \
- echo "Doing maintainer-clean in libbanshee" ; \
- (cd libbanshee && \
- $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
- "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
- "RANLIB=$${RANLIB}" \
- "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
- maintainer-clean) \
- || exit 1
-
-@endif libbanshee
-
-
.PHONY: configure-libiberty maybe-configure-libiberty
maybe-configure-libiberty:
@if libiberty
@[ -d stage1-libcpp ] || mkdir stage1-libcpp; \
set stage1-libcpp libcpp ; @CREATE_LINK_TO_DIR@
@endif libcpp
-@if libbanshee
- @[ -d stage1-libbanshee ] || mkdir stage1-libbanshee; \
- set stage1-libbanshee libbanshee ; @CREATE_LINK_TO_DIR@
-@endif libbanshee
@if libiberty
@[ -d stage1-libiberty ] || mkdir stage1-libiberty; \
set stage1-libiberty libiberty ; @CREATE_LINK_TO_DIR@
@if libcpp
@set libcpp stage1-libcpp ; @UNDO_LINK_TO_DIR@
@endif libcpp
-@if libbanshee
- @set libbanshee stage1-libbanshee ; @UNDO_LINK_TO_DIR@
-@endif libbanshee
@if libiberty
@set libiberty stage1-libiberty ; @UNDO_LINK_TO_DIR@
@endif libiberty
maybe-all-stage1-intl \
maybe-all-stage1-ld \
maybe-all-stage1-libcpp \
- maybe-all-stage1-libbanshee \
maybe-all-stage1-libiberty \
maybe-all-stage1-zlib
maybe-clean-stage1-intl \
maybe-clean-stage1-ld \
maybe-clean-stage1-libcpp \
- maybe-clean-stage1-libbanshee \
maybe-clean-stage1-libiberty \
maybe-clean-stage1-zlib
@endif libcpp-bootstrap
-.PHONY: configure-stage1-libbanshee maybe-configure-stage1-libbanshee
-.PHONY: all-stage1-libbanshee maybe-all-stage1-libbanshee
-.PHONY: clean-stage1-libbanshee maybe-clean-stage1-libbanshee
-
-maybe-configure-stage1-libbanshee:
-maybe-all-stage1-libbanshee:
-maybe-clean-stage1-libbanshee:
-
-@if libbanshee-bootstrap
-maybe-configure-stage1-libbanshee: configure-stage1-libbanshee
-configure-stage1-libbanshee:
- @$(MAKE) stage1-start
- @[ -f libbanshee/Makefile ] && exit 0 || : ; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(HOST_EXPORTS) \
- echo Configuring stage 1 in libbanshee ; \
- cd libbanshee || exit 1; \
- case $(srcdir) in \
- \.) \
- srcdiroption="--srcdir=."; \
- libsrcdir=".";; \
- /* | [A-Za-z]:[\\/]*) \
- srcdiroption="--srcdir=$(srcdir)/libbanshee"; \
- libsrcdir="$$s/libbanshee";; \
- *) \
- srcdiroption="--srcdir=../$(srcdir)/libbanshee"; \
- libsrcdir="$$s/libbanshee";; \
- esac; \
- $(SHELL) $${libsrcdir}/configure \
- $(HOST_CONFIGARGS) $${srcdiroption} \
- --disable-intermodule --disable-coverage --enable-languages="$(STAGE1_LANGUAGES)"
-
-maybe-all-stage1-libbanshee: all-stage1-libbanshee
-all-stage1-libbanshee: configure-stage1-libbanshee
- @$(MAKE) stage1-start
- @r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(HOST_EXPORTS) \
- cd libbanshee && \
- $(MAKE) $(FLAGS_TO_PASS) \
- CFLAGS="$(STAGE1_CFLAGS)"
-
-maybe-clean-stage1-libbanshee: clean-stage1-libbanshee
-clean-stage1-libbanshee:
- @[ -f libbanshee/Makefile ] || [ -f stage1-libbanshee/Makefile ] \
- || exit 0 ; \
- [ -f libbanshee/Makefile ] || $(MAKE) stage1-start ; \
- cd libbanshee && \
- $(MAKE) $(FLAGS_TO_PASS) \
- CFLAGS="$(STAGE1_CFLAGS)" clean
-@endif libbanshee-bootstrap
-
-
.PHONY: configure-stage1-libiberty maybe-configure-stage1-libiberty
.PHONY: all-stage1-libiberty maybe-all-stage1-libiberty
.PHONY: clean-stage1-libiberty maybe-clean-stage1-libiberty
set stage2-libcpp libcpp ; @CREATE_LINK_TO_DIR@ ; \
set stage1-libcpp prev-libcpp ; @CREATE_LINK_TO_DIR@
@endif libcpp
-@if libbanshee
- @[ -d stage2-libbanshee ] || mkdir stage2-libbanshee; \
- set stage2-libbanshee libbanshee ; @CREATE_LINK_TO_DIR@ ; \
- set stage1-libbanshee prev-libbanshee ; @CREATE_LINK_TO_DIR@
-@endif libbanshee
@if libiberty
@[ -d stage2-libiberty ] || mkdir stage2-libiberty; \
set stage2-libiberty libiberty ; @CREATE_LINK_TO_DIR@ ; \
@set libcpp stage2-libcpp ; @UNDO_LINK_TO_DIR@ ; \
set prev-libcpp stage1-libcpp ; @UNDO_LINK_TO_DIR@
@endif libcpp
-@if libbanshee
- @set libbanshee stage2-libbanshee ; @UNDO_LINK_TO_DIR@ ; \
- set prev-libbanshee stage1-libbanshee ; @UNDO_LINK_TO_DIR@
-@endif libbanshee
@if libiberty
@set libiberty stage2-libiberty ; @UNDO_LINK_TO_DIR@ ; \
set prev-libiberty stage1-libiberty ; @UNDO_LINK_TO_DIR@
maybe-all-stage2-intl \
maybe-all-stage2-ld \
maybe-all-stage2-libcpp \
- maybe-all-stage2-libbanshee \
maybe-all-stage2-libiberty \
maybe-all-stage2-zlib
maybe-clean-stage2-intl \
maybe-clean-stage2-ld \
maybe-clean-stage2-libcpp \
- maybe-clean-stage2-libbanshee \
maybe-clean-stage2-libiberty \
maybe-clean-stage2-zlib
@endif libcpp-bootstrap
-.PHONY: configure-stage2-libbanshee maybe-configure-stage2-libbanshee
-.PHONY: all-stage2-libbanshee maybe-all-stage2-libbanshee
-.PHONY: clean-stage2-libbanshee maybe-clean-stage2-libbanshee
-
-maybe-configure-stage2-libbanshee:
-maybe-all-stage2-libbanshee:
-maybe-clean-stage2-libbanshee:
-
-@if libbanshee-bootstrap
-maybe-configure-stage2-libbanshee: configure-stage2-libbanshee
-configure-stage2-libbanshee:
- @$(MAKE) stage2-start
- @[ -f libbanshee/Makefile ] && exit 0 || : ; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(STAGE_HOST_EXPORTS) \
- echo Configuring stage 2 in libbanshee ; \
- cd libbanshee || exit 1; \
- case $(srcdir) in \
- \.) \
- srcdiroption="--srcdir=."; \
- libsrcdir=".";; \
- /* | [A-Za-z]:[\\/]*) \
- srcdiroption="--srcdir=$(srcdir)/libbanshee"; \
- libsrcdir="$$s/libbanshee";; \
- *) \
- srcdiroption="--srcdir=../$(srcdir)/libbanshee"; \
- libsrcdir="$$s/libbanshee";; \
- esac; \
- $(SHELL) $${libsrcdir}/configure \
- $(HOST_CONFIGARGS) $${srcdiroption} \
- @stage2_werror_flag@
-
-maybe-all-stage2-libbanshee: all-stage2-libbanshee
-all-stage2-libbanshee: configure-stage2-libbanshee
- @$(MAKE) stage2-start
- @r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(STAGE_HOST_EXPORTS) \
- cd libbanshee && \
- $(MAKE) $(FLAGS_TO_PASS) \
- $(POSTSTAGE1_FLAGS_TO_PASS) \
-
-
-maybe-clean-stage2-libbanshee: clean-stage2-libbanshee
-clean-stage2-libbanshee:
- @[ -f libbanshee/Makefile ] || [ -f stage2-libbanshee/Makefile ] \
- || exit 0 ; \
- [ -f libbanshee/Makefile ] || $(MAKE) stage2-start ; \
- cd libbanshee && \
- $(MAKE) $(FLAGS_TO_PASS) \
- $(POSTSTAGE1_FLAGS_TO_PASS) \
- clean
-@endif libbanshee-bootstrap
-
-
.PHONY: configure-stage2-libiberty maybe-configure-stage2-libiberty
.PHONY: all-stage2-libiberty maybe-all-stage2-libiberty
.PHONY: clean-stage2-libiberty maybe-clean-stage2-libiberty
set stage3-libcpp libcpp ; @CREATE_LINK_TO_DIR@ ; \
set stage2-libcpp prev-libcpp ; @CREATE_LINK_TO_DIR@
@endif libcpp
-@if libbanshee
- @[ -d stage3-libbanshee ] || mkdir stage3-libbanshee; \
- set stage3-libbanshee libbanshee ; @CREATE_LINK_TO_DIR@ ; \
- set stage2-libbanshee prev-libbanshee ; @CREATE_LINK_TO_DIR@
-@endif libbanshee
@if libiberty
@[ -d stage3-libiberty ] || mkdir stage3-libiberty; \
set stage3-libiberty libiberty ; @CREATE_LINK_TO_DIR@ ; \
@set libcpp stage3-libcpp ; @UNDO_LINK_TO_DIR@ ; \
set prev-libcpp stage2-libcpp ; @UNDO_LINK_TO_DIR@
@endif libcpp
-@if libbanshee
- @set libbanshee stage3-libbanshee ; @UNDO_LINK_TO_DIR@ ; \
- set prev-libbanshee stage2-libbanshee ; @UNDO_LINK_TO_DIR@
-@endif libbanshee
@if libiberty
@set libiberty stage3-libiberty ; @UNDO_LINK_TO_DIR@ ; \
set prev-libiberty stage2-libiberty ; @UNDO_LINK_TO_DIR@
maybe-all-stage3-intl \
maybe-all-stage3-ld \
maybe-all-stage3-libcpp \
- maybe-all-stage3-libbanshee \
maybe-all-stage3-libiberty \
maybe-all-stage3-zlib
maybe-clean-stage3-intl \
maybe-clean-stage3-ld \
maybe-clean-stage3-libcpp \
- maybe-clean-stage3-libbanshee \
maybe-clean-stage3-libiberty \
maybe-clean-stage3-zlib
@endif libcpp-bootstrap
-.PHONY: configure-stage3-libbanshee maybe-configure-stage3-libbanshee
-.PHONY: all-stage3-libbanshee maybe-all-stage3-libbanshee
-.PHONY: clean-stage3-libbanshee maybe-clean-stage3-libbanshee
-
-maybe-configure-stage3-libbanshee:
-maybe-all-stage3-libbanshee:
-maybe-clean-stage3-libbanshee:
-
-@if libbanshee-bootstrap
-maybe-configure-stage3-libbanshee: configure-stage3-libbanshee
-configure-stage3-libbanshee:
- @$(MAKE) stage3-start
- @[ -f libbanshee/Makefile ] && exit 0 || : ; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(STAGE_HOST_EXPORTS) \
- echo Configuring stage 3 in libbanshee ; \
- cd libbanshee || exit 1; \
- case $(srcdir) in \
- \.) \
- srcdiroption="--srcdir=."; \
- libsrcdir=".";; \
- /* | [A-Za-z]:[\\/]*) \
- srcdiroption="--srcdir=$(srcdir)/libbanshee"; \
- libsrcdir="$$s/libbanshee";; \
- *) \
- srcdiroption="--srcdir=../$(srcdir)/libbanshee"; \
- libsrcdir="$$s/libbanshee";; \
- esac; \
- $(SHELL) $${libsrcdir}/configure \
- $(HOST_CONFIGARGS) $${srcdiroption} \
- @stage2_werror_flag@
-
-maybe-all-stage3-libbanshee: all-stage3-libbanshee
-all-stage3-libbanshee: configure-stage3-libbanshee
- @$(MAKE) stage3-start
- @r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(STAGE_HOST_EXPORTS) \
- cd libbanshee && \
- $(MAKE) $(FLAGS_TO_PASS) \
- $(POSTSTAGE1_FLAGS_TO_PASS) \
-
-
-maybe-clean-stage3-libbanshee: clean-stage3-libbanshee
-clean-stage3-libbanshee:
- @[ -f libbanshee/Makefile ] || [ -f stage3-libbanshee/Makefile ] \
- || exit 0 ; \
- [ -f libbanshee/Makefile ] || $(MAKE) stage3-start ; \
- cd libbanshee && \
- $(MAKE) $(FLAGS_TO_PASS) \
- $(POSTSTAGE1_FLAGS_TO_PASS) \
- clean
-@endif libbanshee-bootstrap
-
-
.PHONY: configure-stage3-libiberty maybe-configure-stage3-libiberty
.PHONY: all-stage3-libiberty maybe-all-stage3-libiberty
.PHONY: clean-stage3-libiberty maybe-clean-stage3-libiberty
set stage4-libcpp libcpp ; @CREATE_LINK_TO_DIR@ ; \
set stage3-libcpp prev-libcpp ; @CREATE_LINK_TO_DIR@
@endif libcpp
-@if libbanshee
- @[ -d stage4-libbanshee ] || mkdir stage4-libbanshee; \
- set stage4-libbanshee libbanshee ; @CREATE_LINK_TO_DIR@ ; \
- set stage3-libbanshee prev-libbanshee ; @CREATE_LINK_TO_DIR@
-@endif libbanshee
@if libiberty
@[ -d stage4-libiberty ] || mkdir stage4-libiberty; \
set stage4-libiberty libiberty ; @CREATE_LINK_TO_DIR@ ; \
@set libcpp stage4-libcpp ; @UNDO_LINK_TO_DIR@ ; \
set prev-libcpp stage3-libcpp ; @UNDO_LINK_TO_DIR@
@endif libcpp
-@if libbanshee
- @set libbanshee stage4-libbanshee ; @UNDO_LINK_TO_DIR@ ; \
- set prev-libbanshee stage3-libbanshee ; @UNDO_LINK_TO_DIR@
-@endif libbanshee
@if libiberty
@set libiberty stage4-libiberty ; @UNDO_LINK_TO_DIR@ ; \
set prev-libiberty stage3-libiberty ; @UNDO_LINK_TO_DIR@
maybe-all-stage4-intl \
maybe-all-stage4-ld \
maybe-all-stage4-libcpp \
- maybe-all-stage4-libbanshee \
maybe-all-stage4-libiberty \
maybe-all-stage4-zlib
maybe-clean-stage4-intl \
maybe-clean-stage4-ld \
maybe-clean-stage4-libcpp \
- maybe-clean-stage4-libbanshee \
maybe-clean-stage4-libiberty \
maybe-clean-stage4-zlib
@endif libcpp-bootstrap
-.PHONY: configure-stage4-libbanshee maybe-configure-stage4-libbanshee
-.PHONY: all-stage4-libbanshee maybe-all-stage4-libbanshee
-.PHONY: clean-stage4-libbanshee maybe-clean-stage4-libbanshee
-
-maybe-configure-stage4-libbanshee:
-maybe-all-stage4-libbanshee:
-maybe-clean-stage4-libbanshee:
-
-@if libbanshee-bootstrap
-maybe-configure-stage4-libbanshee: configure-stage4-libbanshee
-configure-stage4-libbanshee:
- @$(MAKE) stage4-start
- @[ -f libbanshee/Makefile ] && exit 0 || : ; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(STAGE_HOST_EXPORTS) \
- echo Configuring stage 4 in libbanshee ; \
- cd libbanshee || exit 1; \
- case $(srcdir) in \
- \.) \
- srcdiroption="--srcdir=."; \
- libsrcdir=".";; \
- /* | [A-Za-z]:[\\/]*) \
- srcdiroption="--srcdir=$(srcdir)/libbanshee"; \
- libsrcdir="$$s/libbanshee";; \
- *) \
- srcdiroption="--srcdir=../$(srcdir)/libbanshee"; \
- libsrcdir="$$s/libbanshee";; \
- esac; \
- $(SHELL) $${libsrcdir}/configure \
- $(HOST_CONFIGARGS) $${srcdiroption} \
- @stage2_werror_flag@
-
-maybe-all-stage4-libbanshee: all-stage4-libbanshee
-all-stage4-libbanshee: configure-stage4-libbanshee
- @$(MAKE) stage4-start
- @r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(STAGE_HOST_EXPORTS) \
- cd libbanshee && \
- $(MAKE) $(FLAGS_TO_PASS) \
- $(POSTSTAGE1_FLAGS_TO_PASS) \
-
-
-maybe-clean-stage4-libbanshee: clean-stage4-libbanshee
-clean-stage4-libbanshee:
- @[ -f libbanshee/Makefile ] || [ -f stage4-libbanshee/Makefile ] \
- || exit 0 ; \
- [ -f libbanshee/Makefile ] || $(MAKE) stage4-start ; \
- cd libbanshee && \
- $(MAKE) $(FLAGS_TO_PASS) \
- $(POSTSTAGE1_FLAGS_TO_PASS) \
- clean
-@endif libbanshee-bootstrap
-
-
.PHONY: configure-stage4-libiberty maybe-configure-stage4-libiberty
.PHONY: all-stage4-libiberty maybe-all-stage4-libiberty
.PHONY: clean-stage4-libiberty maybe-clean-stage4-libiberty
set stageprofile-libcpp libcpp ; @CREATE_LINK_TO_DIR@ ; \
set stage1-libcpp prev-libcpp ; @CREATE_LINK_TO_DIR@
@endif libcpp
-@if libbanshee
- @[ -d stageprofile-libbanshee ] || mkdir stageprofile-libbanshee; \
- set stageprofile-libbanshee libbanshee ; @CREATE_LINK_TO_DIR@ ; \
- set stage1-libbanshee prev-libbanshee ; @CREATE_LINK_TO_DIR@
-@endif libbanshee
@if libiberty
@[ -d stageprofile-libiberty ] || mkdir stageprofile-libiberty; \
set stageprofile-libiberty libiberty ; @CREATE_LINK_TO_DIR@ ; \
@set libcpp stageprofile-libcpp ; @UNDO_LINK_TO_DIR@ ; \
set prev-libcpp stage1-libcpp ; @UNDO_LINK_TO_DIR@
@endif libcpp
-@if libbanshee
- @set libbanshee stageprofile-libbanshee ; @UNDO_LINK_TO_DIR@ ; \
- set prev-libbanshee stage1-libbanshee ; @UNDO_LINK_TO_DIR@
-@endif libbanshee
@if libiberty
@set libiberty stageprofile-libiberty ; @UNDO_LINK_TO_DIR@ ; \
set prev-libiberty stage1-libiberty ; @UNDO_LINK_TO_DIR@
maybe-all-stageprofile-intl \
maybe-all-stageprofile-ld \
maybe-all-stageprofile-libcpp \
- maybe-all-stageprofile-libbanshee \
maybe-all-stageprofile-libiberty \
maybe-all-stageprofile-zlib
maybe-clean-stageprofile-intl \
maybe-clean-stageprofile-ld \
maybe-clean-stageprofile-libcpp \
- maybe-clean-stageprofile-libbanshee \
maybe-clean-stageprofile-libiberty \
maybe-clean-stageprofile-zlib
@endif libcpp-bootstrap
-.PHONY: configure-stageprofile-libbanshee maybe-configure-stageprofile-libbanshee
-.PHONY: all-stageprofile-libbanshee maybe-all-stageprofile-libbanshee
-.PHONY: clean-stageprofile-libbanshee maybe-clean-stageprofile-libbanshee
-
-maybe-configure-stageprofile-libbanshee:
-maybe-all-stageprofile-libbanshee:
-maybe-clean-stageprofile-libbanshee:
-
-@if libbanshee-bootstrap
-maybe-configure-stageprofile-libbanshee: configure-stageprofile-libbanshee
-configure-stageprofile-libbanshee:
- @$(MAKE) stageprofile-start
- @[ -f libbanshee/Makefile ] && exit 0 || : ; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(STAGE_HOST_EXPORTS) \
- echo Configuring stage profile in libbanshee ; \
- cd libbanshee || exit 1; \
- case $(srcdir) in \
- \.) \
- srcdiroption="--srcdir=."; \
- libsrcdir=".";; \
- /* | [A-Za-z]:[\\/]*) \
- srcdiroption="--srcdir=$(srcdir)/libbanshee"; \
- libsrcdir="$$s/libbanshee";; \
- *) \
- srcdiroption="--srcdir=../$(srcdir)/libbanshee"; \
- libsrcdir="$$s/libbanshee";; \
- esac; \
- $(SHELL) $${libsrcdir}/configure \
- $(HOST_CONFIGARGS) $${srcdiroption} \
- @stage2_werror_flag@
-
-maybe-all-stageprofile-libbanshee: all-stageprofile-libbanshee
-all-stageprofile-libbanshee: configure-stageprofile-libbanshee
- @$(MAKE) stageprofile-start
- @r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(STAGE_HOST_EXPORTS) \
- cd libbanshee && \
- $(MAKE) $(FLAGS_TO_PASS) \
- $(POSTSTAGE1_FLAGS_TO_PASS) \
- CFLAGS="$(BOOT_CFLAGS) -fprofile-generate"
-
-maybe-clean-stageprofile-libbanshee: clean-stageprofile-libbanshee
-clean-stageprofile-libbanshee:
- @[ -f libbanshee/Makefile ] || [ -f stageprofile-libbanshee/Makefile ] \
- || exit 0 ; \
- [ -f libbanshee/Makefile ] || $(MAKE) stageprofile-start ; \
- cd libbanshee && \
- $(MAKE) $(FLAGS_TO_PASS) \
- $(POSTSTAGE1_FLAGS_TO_PASS) \
- CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" clean
-@endif libbanshee-bootstrap
-
-
.PHONY: configure-stageprofile-libiberty maybe-configure-stageprofile-libiberty
.PHONY: all-stageprofile-libiberty maybe-all-stageprofile-libiberty
.PHONY: clean-stageprofile-libiberty maybe-clean-stageprofile-libiberty
set stagefeedback-libcpp libcpp ; @CREATE_LINK_TO_DIR@ ; \
set stage1-libcpp prev-libcpp ; @CREATE_LINK_TO_DIR@
@endif libcpp
-@if libbanshee
- @[ -d stagefeedback-libbanshee ] || mkdir stagefeedback-libbanshee; \
- set stagefeedback-libbanshee libbanshee ; @CREATE_LINK_TO_DIR@ ; \
- set stage1-libbanshee prev-libbanshee ; @CREATE_LINK_TO_DIR@
-@endif libbanshee
@if libiberty
@[ -d stagefeedback-libiberty ] || mkdir stagefeedback-libiberty; \
set stagefeedback-libiberty libiberty ; @CREATE_LINK_TO_DIR@ ; \
@set libcpp stagefeedback-libcpp ; @UNDO_LINK_TO_DIR@ ; \
set prev-libcpp stage1-libcpp ; @UNDO_LINK_TO_DIR@
@endif libcpp
-@if libbanshee
- @set libbanshee stagefeedback-libbanshee ; @UNDO_LINK_TO_DIR@ ; \
- set prev-libbanshee stage1-libbanshee ; @UNDO_LINK_TO_DIR@
-@endif libbanshee
@if libiberty
@set libiberty stagefeedback-libiberty ; @UNDO_LINK_TO_DIR@ ; \
set prev-libiberty stage1-libiberty ; @UNDO_LINK_TO_DIR@
maybe-all-stagefeedback-intl \
maybe-all-stagefeedback-ld \
maybe-all-stagefeedback-libcpp \
- maybe-all-stagefeedback-libbanshee \
maybe-all-stagefeedback-libiberty \
maybe-all-stagefeedback-zlib
maybe-clean-stagefeedback-intl \
maybe-clean-stagefeedback-ld \
maybe-clean-stagefeedback-libcpp \
- maybe-clean-stagefeedback-libbanshee \
maybe-clean-stagefeedback-libiberty \
maybe-clean-stagefeedback-zlib
@endif libcpp-bootstrap
-.PHONY: configure-stagefeedback-libbanshee maybe-configure-stagefeedback-libbanshee
-.PHONY: all-stagefeedback-libbanshee maybe-all-stagefeedback-libbanshee
-.PHONY: clean-stagefeedback-libbanshee maybe-clean-stagefeedback-libbanshee
-
-maybe-configure-stagefeedback-libbanshee:
-maybe-all-stagefeedback-libbanshee:
-maybe-clean-stagefeedback-libbanshee:
-
-@if libbanshee-bootstrap
-maybe-configure-stagefeedback-libbanshee: configure-stagefeedback-libbanshee
-configure-stagefeedback-libbanshee:
- @$(MAKE) stagefeedback-start
- @[ -f libbanshee/Makefile ] && exit 0 || : ; \
- r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(STAGE_HOST_EXPORTS) \
- echo Configuring stage feedback in libbanshee ; \
- cd libbanshee || exit 1; \
- case $(srcdir) in \
- \.) \
- srcdiroption="--srcdir=."; \
- libsrcdir=".";; \
- /* | [A-Za-z]:[\\/]*) \
- srcdiroption="--srcdir=$(srcdir)/libbanshee"; \
- libsrcdir="$$s/libbanshee";; \
- *) \
- srcdiroption="--srcdir=../$(srcdir)/libbanshee"; \
- libsrcdir="$$s/libbanshee";; \
- esac; \
- $(SHELL) $${libsrcdir}/configure \
- $(HOST_CONFIGARGS) $${srcdiroption} \
- @stage2_werror_flag@
-
-maybe-all-stagefeedback-libbanshee: all-stagefeedback-libbanshee
-all-stagefeedback-libbanshee: configure-stagefeedback-libbanshee
- @$(MAKE) stagefeedback-start
- @r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(STAGE_HOST_EXPORTS) \
- cd libbanshee && \
- $(MAKE) $(FLAGS_TO_PASS) \
- $(POSTSTAGE1_FLAGS_TO_PASS) \
- CFLAGS="$(BOOT_CFLAGS) -fprofile-use"
-
-maybe-clean-stagefeedback-libbanshee: clean-stagefeedback-libbanshee
-clean-stagefeedback-libbanshee:
- @[ -f libbanshee/Makefile ] || [ -f stagefeedback-libbanshee/Makefile ] \
- || exit 0 ; \
- [ -f libbanshee/Makefile ] || $(MAKE) stagefeedback-start ; \
- cd libbanshee && \
- $(MAKE) $(FLAGS_TO_PASS) \
- $(POSTSTAGE1_FLAGS_TO_PASS) \
- CFLAGS="$(BOOT_CFLAGS) -fprofile-use" clean
-@endif libbanshee-bootstrap
-
-
.PHONY: configure-stagefeedback-libiberty maybe-configure-stagefeedback-libiberty
.PHONY: all-stagefeedback-libiberty maybe-all-stagefeedback-libiberty
.PHONY: clean-stagefeedback-libiberty maybe-clean-stagefeedback-libiberty
all-stage4-gcc: maybe-all-stage4-zlib
all-stageprofile-gcc: maybe-all-stageprofile-zlib
all-stagefeedback-gcc: maybe-all-stagefeedback-zlib
-all-gcc: maybe-all-libbanshee
-
-all-stage1-gcc: maybe-all-stage1-libbanshee
-all-stage2-gcc: maybe-all-stage2-libbanshee
-all-stage3-gcc: maybe-all-stage3-libbanshee
-all-stage4-gcc: maybe-all-stage4-libbanshee
-all-stageprofile-gcc: maybe-all-stageprofile-libbanshee
-all-stagefeedback-gcc: maybe-all-stagefeedback-libbanshee
all-gcc: all-libcpp
all-stage1-gcc: all-stage1-libcpp
all-prebootstrap: maybe-all-intl
all-prebootstrap: maybe-all-ld
all-prebootstrap: maybe-all-libcpp
-all-prebootstrap: maybe-all-libbanshee
all-prebootstrap: maybe-all-libiberty
all-prebootstrap: maybe-all-zlib
@endif gcc-no-bootstrap
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
-ac_help="$ac_help
- --without-libbanshee Don't build with libbanshee"
ac_help="$ac_help
--enable-libada Builds libada directory"
ac_help="$ac_help
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:597: checking host system type" >&5
+echo "configure:595: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:618: checking target system type" >&5
+echo "configure:616: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:636: checking build system type" >&5
+echo "configure:634: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:691: checking for a BSD compatible install" >&5
+echo "configure:689: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:744: checking whether ln works" >&5
+echo "configure:742: checking whether ln works" >&5
if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:768: checking whether ln -s works" >&5
+echo "configure:766: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libbanshee libcpp"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
;;
esac
-# Check whether --with-libbanshee or --without-libbanshee was given.
-if test "${with_libbanshee+set}" = set; then
- withval="$with_libbanshee"
- :
-fi
-
-case ${with_libbanshee} in
- no)
- noconfigdirs="$noconfigdirs libbanshee" ;;
- yes|"")
- with_libbanshee=yes
- ;;
- *)
- { echo "configure: error: --with-libbanshee can only be empty, "yes" or "no" (empty defaults to "yes"." 1>&2; exit 1; }
-esac
# Check whether --enable-libada or --disable-libada was given.
if test "${enable_libada+set}" = set; then
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1792: checking for $ac_word" >&5
+echo "configure:1775: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1822: checking for $ac_word" >&5
+echo "configure:1805: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1873: checking for $ac_word" >&5
+echo "configure:1856: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1905: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1888: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1916 "configure"
+#line 1899 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1947: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1930: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1952: checking whether we are using GNU C" >&5
+echo "configure:1935: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1961: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1944: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1980: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1963: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2047: checking for $ac_word" >&5
+echo "configure:2030: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2079: checking for $ac_word" >&5
+echo "configure:2062: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2112: checking whether compiler driver understands Ada" >&5
+echo "configure:2095: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2145: checking how to compare bootstrapped objects" >&5
+echo "configure:2128: checking how to compare bootstrapped objects" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2243: checking for correct version of gmp.h" >&5
+echo "configure:2226: checking for correct version of gmp.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2245 "configure"
+#line 2228 "configure"
#include "confdefs.h"
#include "gmp.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2256: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2239: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
if test x"$have_gmp" = xyes; then
echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2269: checking for MPFR" >&5
+echo "configure:2252: checking for MPFR" >&5
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
cat > conftest.$ac_ext <<EOF
-#line 2274 "configure"
+#line 2257 "configure"
#include "confdefs.h"
#include <gmp.h>
#include <mpfr.h>
mpfr_t n; mpfr_init(n);
; return 0; }
EOF
-if { (eval echo configure:2282: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2265: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
extra_host_args="$extra_host_args --with-newlib"
fi
-if test x${with_libbanshee} = xyes && echo " ${configdirs} " | grep " libbanshee " >/dev/null 2>&1; then
- extra_host_args="$extra_host_args --with-libbanshee"
-fi
-
# Default to using --with-stabs for certain targets.
if test x${with_stabs} = x ; then
case "${target}" in
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2766: checking for $ac_word" >&5
+echo "configure:2742: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2801: checking for $ac_word" >&5
+echo "configure:2777: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2836: checking for $ac_word" >&5
+echo "configure:2812: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2871: checking for $ac_word" >&5
+echo "configure:2847: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2906: checking for $ac_word" >&5
+echo "configure:2882: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2941: checking for $ac_word" >&5
+echo "configure:2917: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3575: checking for $ac_word" >&5
+echo "configure:3551: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3608: checking for $ac_word" >&5
+echo "configure:3584: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3647: checking for $ac_word" >&5
+echo "configure:3623: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3680: checking for $ac_word" >&5
+echo "configure:3656: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3719: checking for $ac_word" >&5
+echo "configure:3695: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3752: checking for $ac_word" >&5
+echo "configure:3728: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3791: checking for $ac_word" >&5
+echo "configure:3767: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3824: checking for $ac_word" >&5
+echo "configure:3800: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3863: checking for $ac_word" >&5
+echo "configure:3839: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3896: checking for $ac_word" >&5
+echo "configure:3872: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3935: checking for $ac_word" >&5
+echo "configure:3911: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3968: checking for $ac_word" >&5
+echo "configure:3944: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4007: checking for $ac_word" >&5
+echo "configure:3983: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4040: checking for $ac_word" >&5
+echo "configure:4016: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4079: checking for $ac_word" >&5
+echo "configure:4055: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objcopy", so it can be a program name with args.
set dummy objcopy; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4112: checking for $ac_word" >&5
+echo "configure:4088: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ncn_tool_prefix}objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4151: checking for $ac_word" >&5
+echo "configure:4127: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4184: checking for $ac_word" >&5
+echo "configure:4160: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4230: checking for $ac_word" >&5
+echo "configure:4206: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4263: checking for $ac_word" >&5
+echo "configure:4239: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4302: checking for $ac_word" >&5
+echo "configure:4278: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4335: checking for $ac_word" >&5
+echo "configure:4311: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4374: checking for $ac_word" >&5
+echo "configure:4350: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4407: checking for $ac_word" >&5
+echo "configure:4383: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4446: checking for $ac_word" >&5
+echo "configure:4422: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4479: checking for $ac_word" >&5
+echo "configure:4455: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4518: checking for $ac_word" >&5
+echo "configure:4494: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4551: checking for $ac_word" >&5
+echo "configure:4527: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4590: checking for $ac_word" >&5
+echo "configure:4566: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4623: checking for $ac_word" >&5
+echo "configure:4599: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4662: checking for $ac_word" >&5
+echo "configure:4638: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4695: checking for $ac_word" >&5
+echo "configure:4671: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4780: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4756: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
# possible, however, we can resort to mv.
echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
-echo "configure:4827: checking if symbolic links between directories work" >&5
+echo "configure:4803: checking if symbolic links between directories work" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then we branch to the quote section. Otherwise,
+# look for a macro that doesn't take arguments.
+cat >confdef2opt.sed <<\_ACEOF
+t clear
+: clear
+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
+t quote
+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
+t quote
+d
+: quote
+s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
+s,\[,\\&,g
+s,\],\\&,g
+s,\$,$$,g
+p
+_ACEOF
+# We use echo to avoid assuming a particular line-breaking character.
+# The extra dot is to prevent the shell from consuming trailing
+# line-breaks from the sub-command output. A line-break within
+# single-quotes doesn't work because, if this script is created in a
+# platform that uses two characters for line-breaks (e.g., DOS), tr
+# would break.
+ac_LF_and_DOT=`echo; echo .`
+DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
+rm -f confdef2opt.sed
# Without the "./", some shells look in PATH for config.status.
projects / binutils-gdb.git / commitdiff