}
}
+ /* Comparisons == -1 and != -1 of a d-register that's used after the
+ comparison. (If it's unused after we use CPI / SBCI or ADIW sequence
+ from below.) Instead of CPI Rlo,-1 / LDI Rx,-1 / CPC Rhi,Rx we can
+ use CPI Rlo,-1 / CPC Rhi,Rlo which is 1 instruction shorter:
+ If CPI is true then Rlo contains -1 and we can use Rlo instead of Rx
+ when CPC'ing the high part. If CPI is false then CPC cannot render
+ the result to true. This also works for the more generic case where
+ the constant is of the form 0xabab. */
+
+ if (n_bytes == 2
+ && xval != 0
+ && test_hard_reg_class (LD_REGS, xreg)
+ && compare_eq_p (insn)
+ && !reg_unused_after (insn, xreg))
+ {
+ rtx xlo8 = simplify_gen_subreg (QImode, xval, mode, 0);
+ rtx xhi8 = simplify_gen_subreg (QImode, xval, mode, 1);
+
+ if (INTVAL (xlo8) == INTVAL (xhi8))
+ {
+ xop[0] = xreg;
+ xop[1] = xlo8;
+
+ return avr_asm_len ("cpi %A0,%1" CR_TAB
+ "cpc %B0,%A0", xop, plen, 2);
+ }
+ }
+
for (i = 0; i < n_bytes; i++)
{
/* We compare byte-wise. */
/* op[0]: 8-bit destination register
op[1]: 8-bit const int
- op[2]: 8-bit clobber register or SCRATCH
+ op[2]: 8-bit clobber register, SCRATCH or NULL_RTX.
op[3]: 8-bit register containing 0xff or NULL_RTX */
rtx op[4];
- op[2] = xop[3];
+ op[2] = QImode == mode ? NULL_RTX : xop[3];
op[3] = NULL_RTX;
if (plen)
inc %0\;inc %0
dec %0\;dec %0"
[(set_attr "length" "1,1,1,1,2,2")
- (set_attr "cc" "set_czn,set_czn,set_vzn,set_vzn,set_vzn,set_vzn")])
+ (set_attr "cc" "set_czn,set_czn,set_vzn,set_vzn,set_zn,set_zn")])
;; "addhi3"
;; "addhq3" "adduhq3"
[(set_attr "length" "5")
(set_attr "cc" "clobber")])
+(define_insn "*addhi3_zero_extend.const"
+ [(set (match_operand:HI 0 "register_operand" "=d")
+ (plus:HI (zero_extend:HI (match_operand:QI 1 "register_operand" "0"))
+ (match_operand:HI 2 "const_m255_to_m1_operand" "Cn8")))]
+ ""
+ "subi %A0,%n2\;sbc %B0,%B0"
+ [(set_attr "length" "2")
+ (set_attr "cc" "set_czn")])
+
+(define_insn "*usum_widenqihi3"
+ [(set (match_operand:HI 0 "register_operand" "=r")
+ (plus:HI (zero_extend:HI (match_operand:QI 1 "register_operand" "0"))
+ (zero_extend:HI (match_operand:QI 2 "register_operand" "r"))))]
+ ""
+ "add %A0,%2\;clr %B0\;rol %B0"
+ [(set_attr "length" "3")
+ (set_attr "cc" "clobber")])
+
+(define_insn "*udiff_widenqihi3"
+ [(set (match_operand:HI 0 "register_operand" "=r")
+ (minus:HI (zero_extend:HI (match_operand:QI 1 "register_operand" "0"))
+ (zero_extend:HI (match_operand:QI 2 "register_operand" "r"))))]
+ ""
+ "sub %A0,%2\;sbc %B0,%B0"
+ [(set_attr "length" "2")
+ (set_attr "cc" "set_czn")])
+
(define_insn "*addhi3_sp"
[(set (match_operand:HI 1 "stack_register_operand" "=q")
(plus:HI (match_operand:HI 2 "stack_register_operand" "q")
; and
(define_insn "andqi3"
- [(set (match_operand:QI 0 "register_operand" "=??r,d")
- (and:QI (match_operand:QI 1 "register_operand" "%0,0")
- (match_operand:QI 2 "nonmemory_operand" "r,i")))]
+ [(set (match_operand:QI 0 "register_operand" "=??r,d,*l")
+ (and:QI (match_operand:QI 1 "register_operand" "%0,0,0")
+ (match_operand:QI 2 "nonmemory_operand" "r,i,Ca1")))]
""
"@
and %0,%2
- andi %0,lo8(%2)"
- [(set_attr "length" "1,1")
- (set_attr "cc" "set_zn,set_zn")])
+ andi %0,lo8(%2)
+ * return avr_out_bitop (insn, operands, NULL);"
+ [(set_attr "length" "1,1,2")
+ (set_attr "cc" "set_zn,set_zn,none")])
(define_insn "andhi3"
[(set (match_operand:HI 0 "register_operand" "=??r,d,d,r ,r")
;; ior
(define_insn "iorqi3"
- [(set (match_operand:QI 0 "register_operand" "=??r,d")
- (ior:QI (match_operand:QI 1 "register_operand" "%0,0")
- (match_operand:QI 2 "nonmemory_operand" "r,i")))]
+ [(set (match_operand:QI 0 "register_operand" "=??r,d,*l")
+ (ior:QI (match_operand:QI 1 "register_operand" "%0,0,0")
+ (match_operand:QI 2 "nonmemory_operand" "r,i,Co1")))]
""
"@
or %0,%2
- ori %0,lo8(%2)"
- [(set_attr "length" "1,1")
- (set_attr "cc" "set_zn,set_zn")])
+ ori %0,lo8(%2)
+ * return avr_out_bitop (insn, operands, NULL);"
+ [(set_attr "length" "1,1,2")
+ (set_attr "cc" "set_zn,set_zn,none")])
(define_insn "iorhi3"
[(set (match_operand:HI 0 "register_operand" "=??r,d,d,r ,r")
[(set_attr "cc" "compare")
(set_attr "length" "1")])
+
+(define_insn "*cmphi.zero-extend.0"
+ [(set (cc0)
+ (compare (zero_extend:HI (match_operand:QI 0 "register_operand" "r"))
+ (match_operand:HI 1 "register_operand" "r")))]
+ ""
+ "cp %0,%A1\;cpc __zero_reg__,%B1"
+ [(set_attr "cc" "compare")
+ (set_attr "length" "2")])
+
+(define_insn "*cmphi.zero-extend.1"
+ [(set (cc0)
+ (compare (match_operand:HI 0 "register_operand" "r")
+ (zero_extend:HI (match_operand:QI 1 "register_operand" "r"))))]
+ ""
+ "cp %A0,%1\;cpc %B0,__zero_reg__"
+ [(set_attr "cc" "compare")
+ (set_attr "length" "2")])
+
;; "*cmphi"
;; "*cmphq" "*cmpuhq"
;; "*cmpha" "*cmpuha"
(and (match_code "const_int")
(match_test "ival == 7")))
+(define_constraint "Ca1"
+ "Constant 1-byte integer that allows AND by means of CLT + BLD."
+ (and (match_code "const_int")
+ (match_test "avr_popcount_each_byte (op, 1, 1<<7)")))
+
(define_constraint "Ca2"
"Constant 2-byte integer that allows AND without clobber register."
(and (match_code "const_int")
(and (match_code "const_int")
(match_test "avr_popcount_each_byte (op, 4, (1<<0) | (1<<7) | (1<<8))")))
+(define_constraint "Co1"
+ "Constant 1-byte integer that allows AND by means of SET + BLD."
+ (and (match_code "const_int")
+ (match_test "avr_popcount_each_byte (op, 1, 1<<1)")))
+
(define_constraint "Co2"
"Constant 2-byte integer that allows OR without clobber register."
(and (match_code "const_int")
(and (match_code "const_int")
(match_test "!avr_has_nibble_0xf (op)")))
+(define_constraint "Cn8"
+ "A negative constant integer in the range @minus{}255 @dots{} @minus{}1."
+ (and (match_code "const_int")
+ (match_test "IN_RANGE (ival, -255, -1)")))
+
;; CONST_FIXED is no element of 'n' so cook our own.
;; "i" or "s" would match but because the insn uses iterators that cover
;; INT_MODE, "i" or "s" is not always possible.
(match_test "-2 == INTVAL (avr_to_int_mode (op))"))
(match_test "satisfies_constraint_Cm2 (op)")))
+(define_constraint "Yx2"
+ "Fixed-point or integer constant not in the range @minus{}2 @dots{} 2"
+ (and (ior (match_code "const_int")
+ (match_code "const_fixed"))
+ (match_test "!IN_RANGE (INTVAL (avr_to_int_mode (op)), -2, 2)")))
+
;; Similar to "IJ" used with ADIW/SBIW, but for CONST_FIXED.
(define_constraint "YIJ"
projects / gcc.git / commitdiff