configs/freescale_t2080_qds_rdb_defconfig: new board

The board is setup to track upstream Linux as the official
vendor support was complete(depricated) at 4.1 via NXP SDKs.

The target does not build uboot and assumes the user still uses the NXP
suggested prebuilts in the SDK2.0 (last release for PowerPC). If a
uboot is required, the source for SDK2.0 can be found in the following
repo.
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: update .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 424e7e43af4355634f4ec6a5ab0b7878573ff1f3..e9869be78436665d5e35fc6541295b6f803ed0fd 100644 (file)
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -148,6 +148,7 @@ freescale_imx8mqevk_defconfig: { extends: .defconfig }
 freescale_imx8qxpmek_defconfig: { extends: .defconfig }
 freescale_p1025twr_defconfig: { extends: .defconfig }
 freescale_t1040d4rdb_defconfig: { extends: .defconfig }
+freescale_t2080_qds_rdb_defconfig: { extends: .defconfig }
 friendlyarm_nanopi_a64_defconfig: { extends: .defconfig }
 friendlyarm_nanopi_neo2_defconfig: { extends: .defconfig }
 galileo_defconfig: { extends: .defconfig }

diff --git a/configs/freescale_t2080_qds_rdb_defconfig b/configs/freescale_t2080_qds_rdb_defconfig
new file mode 100644 (file)
index 0000000..3d03c32
--- /dev/null
+++ b/configs/freescale_t2080_qds_rdb_defconfig
@@ -0,0 +1,25 @@
+# Architecture
+BR2_powerpc64=y
+BR2_powerpc_e6500=y
+
+# Linux headers same as kernel
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_17=y
+
+# Serial port config
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.17.14"
+BR2_LINUX_KERNEL_DEFCONFIG="corenet64_smp"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="fsl/t2080qds fsl/t2080rdb"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_CPIO_GZIP=y
+BR2_TARGET_ROOTFS_CPIO_UIMAGE=y
+# BR2_TARGET_ROOTFS_TAR is not set
+