Makefile=Makefile
Makefile_in=Makefile.in
norecurse=
+recursing=
removing=
srcdir=
srctrigger=
target=
targets=
+commontargets=
targetsubdir=
template=
verbose=
for arg in $*;
do
case ${arg} in
- -ansi | +ansi)
+ -ansi | +a*)
ansi=true
+ clib=clib
;;
-destdir=* | +destdir=* | +destdi=* | +destd=* | +dest=* | +des=* | +de=* | +d=*)
destdir=`echo ${arg} | sed 's/[+-]d[a-z]*=//'`
;;
- -forcesubdirs | +forcesubdirs | +forcesubdir | +forcesubdi | +forcesubd \
- | +forcesub | +forcesu | +forces | +force | +forc | +for | +fo | +f)
- forcesubdirs=${arg}
- ;;
-languages=* | +languages=* | +language=* | +languag=* \
| +langua=* | +langu=* | +lang=* | +lan=* | +la=* \
| +l=*)
languages="${languages} `echo ${arg} | sed 's/[+-]l[a-z]*=//'`"
;;
- -gas | +gas | +ga | +g)
+ -gas | +g*)
gas=yes
;;
- -help | +h | +help)
+ -help | +h*)
fatal=true
;;
- -nfp | +nfp | +nf | +n)
+ -nfp | +nf*)
nfp=yes
;;
- -norecurse | +norecurse)
+ -norecurse | +no*)
norecurse=true
;;
- -rm | +rm)
+ -recursing)
+ recursing=true
+ ;;
+ -rm | +r*)
removing=${arg}
;;
# -srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*)
# srcdir=`echo ${arg} | sed 's/[+-]s[a-z]*=//'`
# ;;
- -target=* | +target=* | +targe=* | +targ=* | +tar=* | +ta=* | +t=*)
+ -subdirs | +f* | +su*)
+ subdirs=${arg}
+ ;;
+ -target=* | +target=* | +targe=* | +targ=* | +tar=* | +ta=*)
if [ -n "${targets}" ] ; then
- forcesubdirs="+forcesubdirs"
+ subdirs="+subdirs"
fi
newtargets="${targets} `echo ${arg} | sed 's/[+-]t[a-z]*=//'`"
targets="${newtargets}"
;;
- -template=* | +template=*)
+ -template=* | +template=* | +templat=* | +templa=* | +templ=* | +temp=* | +tem=* | +te=*)
template=`echo ${arg} | sed 's/[+-]template=//'`
;;
- +verbose | +verbos | +verbo | +verb | +ver | +ve | +v)
+ -v | -verbose | +v*)
verbose=${arg}
;;
-* | +*)
;;
*)
if [ -n "${hosts}" ] ; then
- forcesubdirs="+forcesubdirs"
+ subdirs="+subdirs"
fi
newhosts="${hosts} ${arg}"
if [ -n "${verbose}" ] ; then
echo `pwd`/configure $*
- echo targets=\"${targets}\"
fi
# process host and target only if not rebuilding configure itself or removing.
if [ -z "${hosts}" ] ; then
(echo ;
echo "configure: No HOST specified." ;
- echo) 2>&1
+ echo) 1>&2
fatal=true
fi
fi
echo "Options: [defaults in brackets]" ;
echo " +ansi configure w/ANSI library. [no ansi lib]" ;
echo " +destdir=MYDIR configure for installation into MYDIR. [/usr/local]" ;
- echo " +forcesubdirs configure in subdirectories. [in source directories]" ;
+ echo " +subdirs configure in subdirectories. [in source directories]" ;
echo " +lang=LANG configure to build LANG. [gcc]" ;
echo " +help print this message. [normal config]" ;
echo " +gas configure the compilers for use with gas. [native as]" ;
echo " +template=TEM rebuild configure using TEM. [normal config]" ;
echo ;
echo "Where HOST and TARGET are something like \"vax\", \"sun3\", \"encore\", etc." ;
- echo "Asking for more than one \"+target\" implies \"+forcesubdirs\". Any other" ;
+ echo "Asking for more than one \"+target\" implies \"+subdirs\". Any other" ;
echo "options given will apply to all targets.") 1>&2
if [ -r config.status ] ; then
# script appropriate for this directory. For more information, check
# any existing configure script.
-configdirs=
srctrigger=ldmain.c
srcname="linker"
# are we rebuilding config itself?
if [ -n "${template}" ] ; then
if [ ! -r ${template} ] ; then
- echo "Can't find template ${template}."
+ echo '***' "Can't find template ${template}." 1>&2
exit 1
fi
if [ -r configure.in ] ; then
if [ -z "`grep '^# per\-host:' configure.in`" ] ; then
- echo `pwd`/configure.in has no "per-host:" line.
+ echo '***' `pwd`/configure.in has no "per-host:" line. 1>&2
exit 1
fi
if [ -z "`grep '^# per\-target:' configure.in`" ] ; then
- echo `pwd`/configure.in has no "per-target:" line.
+ echo '***' `pwd`/configure.in has no "per-target:" line. 1>&2
exit 1
fi
rm template.new
# mv configure configure.old
mv configure.new configure
- echo Rebuilt configure in `pwd`
+
+ if [ -n "${verbose}" ] ; then
+ echo Rebuilt configure in `pwd`
+ fi
+
+ # Now update config.sub from the template directory.
+ if echo "$template" | grep -s 'configure$' ; then
+ cp `echo "$template" | sed s/configure$/config.sub/` ./config.sub.new
+ # mv config.sub config.sub.old
+ mv config.sub.new config.sub
+
+ if [ -n "${verbose}" ] ; then
+ echo Rebuilt config.sub in `pwd`
+ fi
+ fi
if [ -z "${norecurse}" ] ; then
# If template is relative path, make it absolute for recursing.
(cd $i ;
./configure +template=${template} ${verbose})
else
- echo No configure script in `pwd`/$i
+ echo Warning: No configure script in `pwd`/$i
fi
else
- echo Warning: directory $i is missing.
+ if [ -n "${verbose}" ] ; then
+ echo Warning: directory $i is missing.
+ fi
fi
done
done
# some sanity checks on configure.in
if [ -z "${srctrigger}" ] ; then
- echo srctrigger not set in configure.in. `pwd` not configured.
+ echo Warning: srctrigger not set in configure.in. `pwd` not configured.
exit 1
fi
defaulttargets=true
fi
+ result=`/bin/sh ./config.sub ${host}`
+ host_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+ host_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+ host_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+ host=${host_cpu}-${host_vendor}-${host_os}
host_makefile_frag=config/hmake-${host}
#### configure.in per-host parts come in here.
-## end of per-host part.
+if [ "${host_os}" = "posix" ] ; then
+ my_host=posix
+else
+ case "${host_cpu}" in
+ rs6000) my_host=aix ;;
+ mips)
+ case "${host_vendor}" in
+ dec) my_host=dec3100 ;;
+ esac
+ ;;
+ m88k)
+ case "${host_vendor}" in
+ *)
+ case "${host_os}" in
+ dgux) my_host=dgux ;;
+ esac
+ ;;
+ esac
+ ;;
+ m68k)
+ case "${host_vendor}" in
+ hp) my_host=hp9000 ;;
+ sony) my_host=news ;;
+ sun) my_host=sun3 ;;
+ esac
+ ;;
- for target in ${targets} ; do
+ i386)
+ case "${host_vendor}" in
+ *)
+ case "${host_os}" in
+ sysv) my_host=i386v ;;
+ esac
+ ;;
+ esac
+ ;;
- if [ -n "${verbose}" ] ; then
- echo " target=\"${target}\""
- fi
+ sparc)
+ case "${host_vendor}" in
+ sun) my_host=sun4 ;;
+ esac
+ ;;
+
+ rtpc) my_host=rtbsd ;;
+ tahoe | vax) my_host=${host_cpu} ;;
+ esac
+fi
+
+if [ ! -f config/hmake-${my_host} ] ; then
+ echo '***' Binutils do not support host ${host}
+ exit 1
+fi
+host_makefile_frag=config/hmake-${my_host}
+
+## end of per-host part.
+
+ for target in ${targets} ; do
+
+ result=`/bin/sh ./config.sub ${target}`
+ target_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+ target_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+ target_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+ target=${target_cpu}-${target_vendor}-${target_os}
target_makefile_frag=config/tmake-${target}
#### configure.in per-target parts come in here.
+case ${target_cpu} in
+sparc)
+ case ${target_vendor} in
+ sun) my_target=sun4 ;;
+ esac
+ ;;
+m88k) my_target=m88k-bcs ;;
+a29k) my_target=coff-a29k ;;
+esac
+
+target_makefile_frag=config/tmake-${my_target}
+
+files=
+links=
## end of per-target part.
# Temporarily, we support only direct subdir builds.
targetsubdir=Target-${target}
if [ -n "${removing}" ] ; then
- if [ -n "${forcesubdirs}" ] ; then
+ if [ -n "${subdirs}" ] ; then
if [ -d "${hostsubdir}" ] ; then
rm -rf ${hostsubdir}/${targetsubdir}
- if [ -z "`(ls ${hostsubdir}) 2>&1 | grep Target-`" ] ; then
+ if [ -z "`(ls ${hostsubdir}) 2>&1 | grep Target- | grep -v Target-independent`" ] ; then
rm -rf ${hostsubdir}
fi
else
rm -f ${Makefile} config.status ${links}
fi
else
- if [ -n "${forcesubdirs}" ] ; then
+ if [ -n "${subdirs}" ] ; then
# check for existing status before allowing forced subdirs.
if [ -f ${Makefile} ] ; then
- echo "${Makefile} already exists in source directory. `pwd` not configured."
+ echo '***' "${Makefile} already exists in source directory. `pwd` not configured." 1>&2
exit 1
fi
if [ ! -d ${hostsubdir} ] ; then mkdir ${hostsubdir} ; fi
cd ${hostsubdir}
- if [ ! -d ${targetsubdir} ] ; then mkdir ${targetsubdir} ; fi
+ if [ ! -d ${targetsubdir} ] ; then
+ if [ -z "${commontargets}" ] ; then
+ mkdir ${targetsubdir}
+ else
+ if [ ! -d Target-independent ] ; then
+ mkdir Target-independent
+ fi
+
+ ${symbolic_link} Target-independent ${targetsubdir}
+ fi # if target independent
+ fi # if no target dir yet
+
cd ${targetsubdir}
srcdir=../..
else
# if not subdir builds, then make sure none exist.
if [ -n "`(ls .) 2>&1 | grep Host-`" ] ; then
- echo "Configured subdirs exist. `pwd` not configured."
+ echo '***' "Configured subdirs exist. `pwd` not configured." 1>&2
exit 1
fi
fi
if [ -n "${srctrigger}" -a ! -r ${srcdir}/${srctrigger} ] ; then
if [ -z "${srcdirdefaulted}" ] ; then
- echo "${progname}: Can't find ${srcname} sources in `pwd`/${srcdir}" 1>&2
+ echo '***' "${progname}: Can't find ${srcname} sources in `pwd`/${srcdir}" 1>&2
else
- echo "${progname}: Can't find ${srcname} sources in `pwd`/. or `pwd`/.." 1>&2
+ echo '***' "${progname}: Can't find ${srcname} sources in `pwd`/. or `pwd`/.." 1>&2
fi
- echo \(At least ${srctrigger} is missing.\) 1>&2
+ echo '***' \(At least ${srctrigger} is missing.\) 1>&2
exit 1
fi
set ${links}; link=$1; shift; links=$*
if [ ! -r ${srcdir}/${file} ] ; then
- echo "${progname}: cannot create a link \"${link}\"," 1>&2
- echo "since the file \"${file}\" does not exist." 1>&2
+ echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
+ echo '***' "since the file \"${file}\" does not exist." 1>&2
exit 1
fi
${symbolic_link} ${srcdir}/${file} ${link} 2>/dev/null || ${hard_link} ${srcdir}/${file} ${link}
if [ ! -r ${link} ] ; then
- echo "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2
+ echo '***' "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2
exit 1
fi
- echo "Linked \"${link}\" to \"${srcdir}/${file}\"."
+
+ if [ -n "${verbose}" ] ; then
+ echo "Linked \"${link}\" to \"${srcdir}/${file}\"."
+ fi
done
# Create a .gdbinit file which runs the one in srcdir
echo "host = ${host}" >> ${Makefile}
echo "target = ${target}" >> ${Makefile}
- if [ -n "${forcesubdirs}" ] ; then
+ if [ -n "${subdirs}" ] ; then
echo "subdir = /${hostsubdir}/${targetsubdir}" >> ${Makefile}
else
echo "subdir =" >> ${Makefile}
andusing=${using}
fi
- echo "Created \"${Makefile}\"" in `pwd`${andusing}.
+ if [ -n "${verbose}" -o -z "${recursing}" ] ; then
+ echo "Created \"${Makefile}\"" in `pwd`${andusing}.
+ fi
#### configure.in post-target parts come in here.
originaldir=`pwd`
cd ${srcdir}
fi
+
+ # If there are subdirectories, then recurse.
+ if [ -z "${norecurse}" -a -n "${configdirs}" ] ; then
+ for configdir in ${configdirs} ; do
+ if [ -n "${verbose}" ] ; then
+ echo Configuring ${configdir}...
+ fi
+
+ if [ -d ${configdir} ] ; then
+ (cd ${configdir} ;
+ ./configure -recursing ${host} +target=${target} \
+ ${verbose} ${subdirs} ${removing} +destdir=${destdir}) \
+ | sed 's/^/ /'
+ else
+ if [ -n "${verbose}" ] ; then
+ echo Warning: directory \"${configdir}\" is missing.
+ fi
+ fi
+ done
+ fi
done # for each target
# Now build a Makefile for this host.
- if [ -n "${forcesubdirs}" -a ! -n "${removing}" ] ; then
+ if [ -n "${subdirs}" -a ! -n "${removing}" ] ; then
cd ${hostsubdir}
cat > GNUmakefile << E!O!F
# Makefile generated by configure for host ${host}.
fi
done # for each host
-# If there are subdirectories, then recurse.
-
-if [ -n "${norecurse}" -o -z "${configdirs}" ] ; then exit 0 ; fi
-
-# configdirs is not null
-for configdir in ${configdirs} ; do
- echo Configuring ${configdir}...
- specifics=
- commons=
-
- if [ -n "${defaulttargets}" ] ; then
- for host in ${hosts} ; do
- if [ -d ${configdir}.${host} ] ; then
- newspecifics="${specifics} ${host}"
- specifics=${newspecifics}
- else
- newcommons="${commons} ${host}"
- commons=${newcommons}
- fi # if target specific
- done # for each host
-
- if [ -n "${commons}" ] ; then
- if [ -d ${configdir} ] ; then
- (cd ${configdir} ;
- ./configure ${commons} ${verbose} ${forcesubdirs} ${removing} +destdir=${destdir}) \
- | sed 's/^/ /'
- else
- echo Warning: directory \"${configdir}\" is missing.
- fi
- fi # if any common hosts
-
- if [ -n "${specifics}" ] ; then
- for host in ${specifics} ; do
- echo Configuring target specific directory ${configdir}.${host}...
- (cd ${configdir}.${host} ;
- ./configure ${host} ${verbose} ${forcesubdirs} ${removing} +destdir=${destdir}) \
- | sed 's/^/ /'
- done # for host in specifics
- fi # if there are any specifics
- else
-
- for target in ${targets} ; do
- if [ -d ${configdir}.${target} ] ; then
- newspecifics="${specifics} ${target}"
- specifics=${newspecifics}
- else
- newcommons="${commons} +target=${target}"
- commons=${newcommons}
- fi
-
- done # check for target specific dir override
-
- if [ -n "${verbose}" ] ; then
- echo " "commons=\"${commons}\"
- echo " "specifics=\"${specifics}\"
- fi # if verbose
-
- if [ -n "${commons}" ] ; then
- if [ -d ${configdir} ] ; then
- (cd ${configdir} ;
- ./configure ${hosts} ${verbose} ${forcesubdirs} ${removing} \
- ${commons} +destdir=${destdir}) \
- | sed 's/^/ /'
- else
- echo Warning: directory \"${configdir}\" is missing.
- fi
- fi # if any commons
-
- if [ -n "${specifics}" ] ; then
- for target in ${specifics} ; do
- echo Configuring target specific directory ${configdir}.${target}...
- (cd ${configdir}.${target} ;
- ./configure ${hosts} ${verbose} ${forcesubdirs} ${removing} \
- "+target=${target}" +destdir=${destdir}) \
- | sed 's/^/ /'
- done
- fi # if any specifics
- fi # not default targets
-done
-
exit 0
#
# $Log$
-# Revision 1.16 1991/08/06 19:12:42 rich
+# Revision 1.20 1991/08/22 06:21:45 rich
+# Three part names & all.
+#
+# Revision 1.29 1991/08/20 04:56:51 rich
+# revisiting error messages
+#
+# Revision 1.28 1991/08/16 19:22:17 rich
+# This is the commontargets change and should be considered
+# experimental.
+#
+# Revision 1.27 1991/08/08 01:14:13 rich
+# allow +f to stand in for +subdirs
+#
+# Revision 1.26 1991/08/07 19:21:32 rich
+# +forcesubdirs -> +subdirs
+#
+# Revision 1.25 1991/08/07 07:05:30 rich
+# Added make.
+#
+# Revision 1.24 1991/08/06 19:26:01 rich
+# revised option parsing.
+#
+# Revision 1.23 1991/08/06 19:12:32 rich
# Host-level GNUmakefiles.
#
# Revision 1.22 1991/07/20 01:22:30 rich
projects / binutils-gdb.git / commitdiff