-diff -urN genext2fs-1.3.orig/Makefile genext2fs-1.3/Makefile
---- genext2fs-1.3.orig/Makefile 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/Makefile 2003-04-21 01:41:42.000000000 -0600
-@@ -0,0 +1,46 @@
-+CC=gcc
-+CFLAGS=-Wall -O0 -g
+diff --exclude CVS -urN genext2fs-1.3.orig/AUTHORS genext2fs/AUTHORS
+--- genext2fs-1.3.orig/AUTHORS 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/AUTHORS 2001-05-02 12:20:05.000000000 -0600
+@@ -0,0 +1 @@
++Xavier Bestel <xavier.bestel@free.fr>
+diff --exclude CVS -urN genext2fs-1.3.orig/ChangeLog genext2fs/ChangeLog
+--- genext2fs-1.3.orig/ChangeLog 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/ChangeLog 2004-11-21 23:21:05.000000000 -0700
+@@ -0,0 +1,2 @@
++see our cvs logs here:
++http://cvs.sourceforge.net/viewcvs.py/genext2fs/genext2fs/
+diff --exclude CVS -urN genext2fs-1.3.orig/INSTALL genext2fs/INSTALL
+--- genext2fs-1.3.orig/INSTALL 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/INSTALL 2004-11-21 23:19:19.000000000 -0700
+@@ -0,0 +1,5 @@
++To install, just do it the normal GNU way:
+
-+SRC=genext2fs.c
-+OBJS=$(patsubst %.c,%.o, $(SRC))
++./configure
++make
++sudo make install
+diff --exclude CVS -urN genext2fs-1.3.orig/Makefile.am genext2fs/Makefile.am
+--- genext2fs-1.3.orig/Makefile.am 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/Makefile.am 2002-10-16 09:41:00.000000000 -0600
+@@ -0,0 +1,11 @@
++bin_PROGRAMS = genext2fs
++genext2fs_SOURCES = genext2fs.c
++man_MANS = genext2fs.8
+
-+all: genext2fs
-+INSTALL=install
++# test genext2fs by creating the image and comparing checksums
++test: all
++ sh ./test.sh
++
++# test genext2fs by actually mounting the created image.
++test-mount: all
++ sudo sh ./test-mount.sh
+diff --exclude CVS -urN genext2fs-1.3.orig/Makefile.in genext2fs/Makefile.in
+--- genext2fs-1.3.orig/Makefile.in 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/Makefile.in 2004-12-27 13:03:47.000000000 -0700
+@@ -0,0 +1,570 @@
++# Makefile.in generated by automake 1.8.5 from Makefile.am.
++# @configure_input@
++
++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
++# 2003, 2004 Free Software Foundation, Inc.
++# This Makefile.in is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
++# PARTICULAR PURPOSE.
++
++@SET_MAKE@
++
++SOURCES = $(genext2fs_SOURCES)
++
++srcdir = @srcdir@
++top_srcdir = @top_srcdir@
++VPATH = @srcdir@
++pkgdatadir = $(datadir)/@PACKAGE@
++pkglibdir = $(libdir)/@PACKAGE@
++pkgincludedir = $(includedir)/@PACKAGE@
++top_builddir = .
++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
++INSTALL = @INSTALL@
++install_sh_DATA = $(install_sh) -c -m 644
++install_sh_PROGRAM = $(install_sh) -c
++install_sh_SCRIPT = $(install_sh) -c
++INSTALL_HEADER = $(INSTALL_DATA)
++transform = $(program_transform_name)
++NORMAL_INSTALL = :
++PRE_INSTALL = :
++POST_INSTALL = :
++NORMAL_UNINSTALL = :
++PRE_UNINSTALL = :
++POST_UNINSTALL = :
++bin_PROGRAMS = genext2fs$(EXEEXT)
++subdir = .
++DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
++ $(srcdir)/Makefile.in $(top_srcdir)/configure AUTHORS COPYING \
++ ChangeLog INSTALL NEWS TODO depcomp install-sh missing
++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
++am__aclocal_m4_deps = $(top_srcdir)/configure.in
++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
++ $(ACLOCAL_M4)
++am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
++ configure.lineno configure.status.lineno
++mkinstalldirs = $(mkdir_p)
++CONFIG_CLEAN_FILES =
++am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man8dir)"
++binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
++PROGRAMS = $(bin_PROGRAMS)
++am_genext2fs_OBJECTS = genext2fs.$(OBJEXT)
++genext2fs_OBJECTS = $(am_genext2fs_OBJECTS)
++genext2fs_LDADD = $(LDADD)
++DEFAULT_INCLUDES = -I. -I$(srcdir)
++depcomp = $(SHELL) $(top_srcdir)/depcomp
++am__depfiles_maybe = depfiles
++@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/genext2fs.Po
++COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
++ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
++CCLD = $(CC)
++LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
++SOURCES = $(genext2fs_SOURCES)
++DIST_SOURCES = $(genext2fs_SOURCES)
++man8dir = $(mandir)/man8
++NROFF = nroff
++MANS = $(man_MANS)
++ETAGS = etags
++CTAGS = ctags
++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
++distdir = $(PACKAGE)-$(VERSION)
++top_distdir = $(distdir)
++am__remove_distdir = \
++ { test ! -d $(distdir) \
++ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
++ && rm -fr $(distdir); }; }
++DIST_ARCHIVES = $(distdir).tar.gz
++GZIP_ENV = --best
++distuninstallcheck_listfiles = find . -type f -print
++distcleancheck_listfiles = find . -type f -print
++ACLOCAL = @ACLOCAL@
++AMDEP_FALSE = @AMDEP_FALSE@
++AMDEP_TRUE = @AMDEP_TRUE@
++AMTAR = @AMTAR@
++AUTOCONF = @AUTOCONF@
++AUTOHEADER = @AUTOHEADER@
++AUTOMAKE = @AUTOMAKE@
++AWK = @AWK@
++CC = @CC@
++CCDEPMODE = @CCDEPMODE@
++CFLAGS = @CFLAGS@
++CPPFLAGS = @CPPFLAGS@
++CYGPATH_W = @CYGPATH_W@
++DEFS = @DEFS@
++DEPDIR = @DEPDIR@
++ECHO_C = @ECHO_C@
++ECHO_N = @ECHO_N@
++ECHO_T = @ECHO_T@
++EXEEXT = @EXEEXT@
++INSTALL_DATA = @INSTALL_DATA@
++INSTALL_PROGRAM = @INSTALL_PROGRAM@
++INSTALL_SCRIPT = @INSTALL_SCRIPT@
++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
++LDFLAGS = @LDFLAGS@
++LIBOBJS = @LIBOBJS@
++LIBS = @LIBS@
++LTLIBOBJS = @LTLIBOBJS@
++MAKEINFO = @MAKEINFO@
++OBJEXT = @OBJEXT@
++PACKAGE = @PACKAGE@
++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
++PACKAGE_NAME = @PACKAGE_NAME@
++PACKAGE_STRING = @PACKAGE_STRING@
++PACKAGE_TARNAME = @PACKAGE_TARNAME@
++PACKAGE_VERSION = @PACKAGE_VERSION@
++PATH_SEPARATOR = @PATH_SEPARATOR@
++SET_MAKE = @SET_MAKE@
++SHELL = @SHELL@
++STRIP = @STRIP@
++VERSION = @VERSION@
++ac_ct_CC = @ac_ct_CC@
++ac_ct_STRIP = @ac_ct_STRIP@
++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
++am__include = @am__include@
++am__leading_dot = @am__leading_dot@
++am__quote = @am__quote@
++bindir = @bindir@
++build_alias = @build_alias@
++datadir = @datadir@
++exec_prefix = @exec_prefix@
++host_alias = @host_alias@
++includedir = @includedir@
++infodir = @infodir@
++install_sh = @install_sh@
++libdir = @libdir@
++libexecdir = @libexecdir@
++localstatedir = @localstatedir@
++mandir = @mandir@
++mkdir_p = @mkdir_p@
++oldincludedir = @oldincludedir@
++prefix = @prefix@
++program_transform_name = @program_transform_name@
++sbindir = @sbindir@
++sharedstatedir = @sharedstatedir@
++sysconfdir = @sysconfdir@
++target_alias = @target_alias@
++genext2fs_SOURCES = genext2fs.c
++man_MANS = genext2fs.8
++all: all-am
++
++.SUFFIXES:
++.SUFFIXES: .c .o .obj
++am--refresh:
++ @:
++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
++ @for dep in $?; do \
++ case '$(am__configure_deps)' in \
++ *$$dep*) \
++ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
++ cd $(srcdir) && $(AUTOMAKE) --gnu \
++ && exit 0; \
++ exit 1;; \
++ esac; \
++ done; \
++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
++ cd $(top_srcdir) && \
++ $(AUTOMAKE) --gnu Makefile
++.PRECIOUS: Makefile
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++ @case '$?' in \
++ *config.status*) \
++ echo ' $(SHELL) ./config.status'; \
++ $(SHELL) ./config.status;; \
++ *) \
++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
++ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
++ esac;
++
++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
++ $(SHELL) ./config.status --recheck
++
++$(top_srcdir)/configure: $(am__configure_deps)
++ cd $(srcdir) && $(AUTOCONF)
++$(ACLOCAL_M4): $(am__aclocal_m4_deps)
++ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
++install-binPROGRAMS: $(bin_PROGRAMS)
++ @$(NORMAL_INSTALL)
++ test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
++ @list='$(bin_PROGRAMS)'; for p in $$list; do \
++ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
++ if test -f $$p \
++ ; then \
++ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
++ echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
++ $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
++ else :; fi; \
++ done
++
++uninstall-binPROGRAMS:
++ @$(NORMAL_UNINSTALL)
++ @list='$(bin_PROGRAMS)'; for p in $$list; do \
++ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
++ echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
++ rm -f "$(DESTDIR)$(bindir)/$$f"; \
++ done
++
++clean-binPROGRAMS:
++ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
++genext2fs$(EXEEXT): $(genext2fs_OBJECTS) $(genext2fs_DEPENDENCIES)
++ @rm -f genext2fs$(EXEEXT)
++ $(LINK) $(genext2fs_LDFLAGS) $(genext2fs_OBJECTS) $(genext2fs_LDADD) $(LIBS)
++
++mostlyclean-compile:
++ -rm -f *.$(OBJEXT)
++
++distclean-compile:
++ -rm -f *.tab.c
++
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/genext2fs.Po@am__quote@
++
++.c.o:
++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(COMPILE) -c $<
++
++.c.obj:
++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
++uninstall-info-am:
++install-man8: $(man8_MANS) $(man_MANS)
++ @$(NORMAL_INSTALL)
++ test -z "$(man8dir)" || $(mkdir_p) "$(DESTDIR)$(man8dir)"
++ @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
++ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
++ for i in $$l2; do \
++ case "$$i" in \
++ *.8*) list="$$list $$i" ;; \
++ esac; \
++ done; \
++ for i in $$list; do \
++ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
++ else file=$$i; fi; \
++ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
++ case "$$ext" in \
++ 8*) ;; \
++ *) ext='8' ;; \
++ esac; \
++ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
++ inst=`echo $$inst | sed -e 's/^.*\///'`; \
++ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
++ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
++ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
++ done
++uninstall-man8:
++ @$(NORMAL_UNINSTALL)
++ @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
++ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
++ for i in $$l2; do \
++ case "$$i" in \
++ *.8*) list="$$list $$i" ;; \
++ esac; \
++ done; \
++ for i in $$list; do \
++ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
++ case "$$ext" in \
++ 8*) ;; \
++ *) ext='8' ;; \
++ esac; \
++ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
++ inst=`echo $$inst | sed -e 's/^.*\///'`; \
++ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
++ echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
++ rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
++ done
++
++ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | \
++ $(AWK) ' { files[$$0] = 1; } \
++ END { for (i in files) print i; }'`; \
++ mkid -fID $$unique
++tags: TAGS
++
++TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
++ $(TAGS_FILES) $(LISP)
++ tags=; \
++ here=`pwd`; \
++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | \
++ $(AWK) ' { files[$$0] = 1; } \
++ END { for (i in files) print i; }'`; \
++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
++ test -n "$$unique" || unique=$$empty_fix; \
++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++ $$tags $$unique; \
++ fi
++ctags: CTAGS
++CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
++ $(TAGS_FILES) $(LISP)
++ tags=; \
++ here=`pwd`; \
++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
++ unique=`for i in $$list; do \
++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++ done | \
++ $(AWK) ' { files[$$0] = 1; } \
++ END { for (i in files) print i; }'`; \
++ test -z "$(CTAGS_ARGS)$$tags$$unique" \
++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
++ $$tags $$unique
++
++GTAGS:
++ here=`$(am__cd) $(top_builddir) && pwd` \
++ && cd $(top_srcdir) \
++ && gtags -i $(GTAGS_ARGS) $$here
++
++distclean-tags:
++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
++
++distdir: $(DISTFILES)
++ $(am__remove_distdir)
++ mkdir $(distdir)
++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
++ list='$(DISTFILES)'; for file in $$list; do \
++ case $$file in \
++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
++ esac; \
++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
++ dir="/$$dir"; \
++ $(mkdir_p) "$(distdir)$$dir"; \
++ else \
++ dir=''; \
++ fi; \
++ if test -d $$d/$$file; then \
++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
++ fi; \
++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
++ else \
++ test -f $(distdir)/$$file \
++ || cp -p $$d/$$file $(distdir)/$$file \
++ || exit 1; \
++ fi; \
++ done
++ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
++ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
++ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
++ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
++ || chmod -R a+r $(distdir)
++dist-gzip: distdir
++ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
++ $(am__remove_distdir)
++
++dist-bzip2: distdir
++ $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
++ $(am__remove_distdir)
++
++dist-tarZ: distdir
++ $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
++ $(am__remove_distdir)
++
++dist-shar: distdir
++ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
++ $(am__remove_distdir)
++
++dist-zip: distdir
++ -rm -f $(distdir).zip
++ zip -rq $(distdir).zip $(distdir)
++ $(am__remove_distdir)
++
++dist dist-all: distdir
++ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
++ $(am__remove_distdir)
++
++# This target untars the dist file and tries a VPATH configuration. Then
++# it guarantees that the distribution is self-contained by making another
++# tarfile.
++distcheck: dist
++ case '$(DIST_ARCHIVES)' in \
++ *.tar.gz*) \
++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
++ *.tar.bz2*) \
++ bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
++ *.tar.Z*) \
++ uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
++ *.shar.gz*) \
++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
++ *.zip*) \
++ unzip $(distdir).zip ;;\
++ esac
++ chmod -R a-w $(distdir); chmod a+w $(distdir)
++ mkdir $(distdir)/_build
++ mkdir $(distdir)/_inst
++ chmod a-w $(distdir)
++ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
++ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
++ && cd $(distdir)/_build \
++ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
++ $(DISTCHECK_CONFIGURE_FLAGS) \
++ && $(MAKE) $(AM_MAKEFLAGS) \
++ && $(MAKE) $(AM_MAKEFLAGS) dvi \
++ && $(MAKE) $(AM_MAKEFLAGS) check \
++ && $(MAKE) $(AM_MAKEFLAGS) install \
++ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
++ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
++ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
++ distuninstallcheck \
++ && chmod -R a-w "$$dc_install_base" \
++ && ({ \
++ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
++ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
++ } || { rm -rf "$$dc_destdir"; exit 1; }) \
++ && rm -rf "$$dc_destdir" \
++ && $(MAKE) $(AM_MAKEFLAGS) dist \
++ && rm -rf $(DIST_ARCHIVES) \
++ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
++ $(am__remove_distdir)
++ @(echo "$(distdir) archives ready for distribution: "; \
++ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
++ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
++distuninstallcheck:
++ @cd $(distuninstallcheck_dir) \
++ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
++ || { echo "ERROR: files left after uninstall:" ; \
++ if test -n "$(DESTDIR)"; then \
++ echo " (check DESTDIR support)"; \
++ fi ; \
++ $(distuninstallcheck_listfiles) ; \
++ exit 1; } >&2
++distcleancheck: distclean
++ @if test '$(srcdir)' = . ; then \
++ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
++ exit 1 ; \
++ fi
++ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
++ || { echo "ERROR: files left in build directory after distclean:" ; \
++ $(distcleancheck_listfiles) ; \
++ exit 1; } >&2
++check-am: all-am
++check: check-am
++all-am: Makefile $(PROGRAMS) $(MANS)
++installdirs:
++ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man8dir)"; do \
++ test -z "$$dir" || $(mkdir_p) "$$dir"; \
++ done
++install: install-am
++install-exec: install-exec-am
++install-data: install-data-am
++uninstall: uninstall-am
++
++install-am: all-am
++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
++
++installcheck: installcheck-am
++install-strip:
++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
++ `test -z '$(STRIP)' || \
++ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
++mostlyclean-generic:
++
++clean-generic:
++
++distclean-generic:
++ -rm -f $(CONFIG_CLEAN_FILES)
++
++maintainer-clean-generic:
++ @echo "This command is intended for maintainers to use"
++ @echo "it deletes files that may require special tools to rebuild."
++clean: clean-am
++
++clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
++
++distclean: distclean-am
++ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
++ -rm -rf ./$(DEPDIR)
++ -rm -f Makefile
++distclean-am: clean-am distclean-compile distclean-generic \
++ distclean-tags
++
++dvi: dvi-am
++
++dvi-am:
++
++html: html-am
++
++info: info-am
++
++info-am:
++
++install-data-am: install-man
++
++install-exec-am: install-binPROGRAMS
++
++install-info: install-info-am
++
++install-man: install-man8
++
++installcheck-am:
++
++maintainer-clean: maintainer-clean-am
++ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
++ -rm -rf $(top_srcdir)/autom4te.cache
++ -rm -rf ./$(DEPDIR)
++ -rm -f Makefile
++maintainer-clean-am: distclean-am maintainer-clean-generic
++
++mostlyclean: mostlyclean-am
++
++mostlyclean-am: mostlyclean-compile mostlyclean-generic
++
++pdf: pdf-am
++
++pdf-am:
++
++ps: ps-am
++
++ps-am:
++
++uninstall-am: uninstall-binPROGRAMS uninstall-info-am uninstall-man
++
++uninstall-man: uninstall-man8
++
++.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
++ clean-binPROGRAMS clean-generic ctags dist dist-all dist-bzip2 \
++ dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \
++ distclean-compile distclean-generic distclean-tags \
++ distcleancheck distdir distuninstallcheck dvi dvi-am html \
++ html-am info info-am install install-am install-binPROGRAMS \
++ install-data install-data-am install-exec install-exec-am \
++ install-info install-info-am install-man install-man8 \
++ install-strip installcheck installcheck-am installdirs \
++ maintainer-clean maintainer-clean-generic mostlyclean \
++ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
++ tags uninstall uninstall-am uninstall-binPROGRAMS \
++ uninstall-info-am uninstall-man uninstall-man8
++
++
++# test genext2fs by creating the image and comparing checksums
++test: all
++ sh ./test.sh
++
++# test genext2fs by actually mounting the created image.
++test-mount: all
++ sudo sh ./test-mount.sh
++# Tell versions [3.59,3.63) of GNU make to not export all variables.
++# Otherwise a system limit (for SysV at least) may be exceeded.
++.NOEXPORT:
+diff --exclude CVS -urN genext2fs-1.3.orig/NEWS genext2fs/NEWS
+--- genext2fs-1.3.orig/NEWS 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/NEWS 2004-11-21 23:21:05.000000000 -0700
+@@ -0,0 +1 @@
++No news yet :)
+diff --exclude CVS -urN genext2fs-1.3.orig/README genext2fs/README
+--- genext2fs-1.3.orig/README 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/README 2004-11-21 23:18:40.000000000 -0700
+@@ -0,0 +1,19 @@
++ ABOUT
++-----------
++genext2fs is a mean to generate an ext2 filesystem as a normal (non-root)
++user. It doesn't require you to mount the image file to copy files on it.
++It doesn't even require you to be the superuser to make device nodes.
++
++http://sourceforge.net/projects/genext2fs
++
++ CONTACT
++-------------
++Please use the genext2fs-devel@lists.sourceforge.net mailing list.
++
++ INSTALL
++-------------
++Please see the INSTALL file ;)
++
++ AUTHORS
++-------------
++Please see the AUTHORS file ;)
+diff --exclude CVS -urN genext2fs-1.3.orig/TODO genext2fs/TODO
+--- genext2fs-1.3.orig/TODO 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/TODO 2004-11-25 11:12:10.000000000 -0700
+@@ -0,0 +1,13 @@
++Disclaimer: I'll probably never do all this ...
++
++- support fancy ext2 options
++- support ext3
++
++- add path to -f/-d options, e.g:
++ -f /:file.img => extract file.img at root
++ -d /etc:/path/to/my/etc => copy /path/to/my/etc into /etc
++
++- add tar.gz extraction capabilities ?
++
++- implement truncate_node
++- find a better way to guess filesystem's size
+diff --exclude CVS -urN genext2fs-1.3.orig/aclocal.m4 genext2fs/aclocal.m4
+--- genext2fs-1.3.orig/aclocal.m4 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/aclocal.m4 2004-12-27 13:03:45.000000000 -0700
+@@ -0,0 +1,908 @@
++# generated automatically by aclocal 1.8.5 -*- Autoconf -*-
++
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
++# Free Software Foundation, Inc.
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
++# PARTICULAR PURPOSE.
++
++# -*- Autoconf -*-
++# Copyright (C) 2002, 2003 Free Software Foundation, Inc.
++# Generated from amversion.in; do not edit by hand.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++
++# AM_AUTOMAKE_VERSION(VERSION)
++# ----------------------------
++# Automake X.Y traces this macro to ensure aclocal.m4 has been
++# generated from the m4 files accompanying Automake X.Y.
++AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"])
++
++# AM_SET_CURRENT_AUTOMAKE_VERSION
++# -------------------------------
++# Call AM_AUTOMAKE_VERSION so it can be traced.
++# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
++ [AM_AUTOMAKE_VERSION([1.8.5])])
++
++# AM_AUX_DIR_EXPAND
++
++# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
++# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
++# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
++#
++# Of course, Automake must honor this variable whenever it calls a
++# tool from the auxiliary directory. The problem is that $srcdir (and
++# therefore $ac_aux_dir as well) can be either absolute or relative,
++# depending on how configure is run. This is pretty annoying, since
++# it makes $ac_aux_dir quite unusable in subdirectories: in the top
++# source directory, any form will work fine, but in subdirectories a
++# relative path needs to be adjusted first.
++#
++# $ac_aux_dir/missing
++# fails when called from a subdirectory if $ac_aux_dir is relative
++# $top_srcdir/$ac_aux_dir/missing
++# fails if $ac_aux_dir is absolute,
++# fails when called from a subdirectory in a VPATH build with
++# a relative $ac_aux_dir
++#
++# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
++# are both prefixed by $srcdir. In an in-source build this is usually
++# harmless because $srcdir is `.', but things will broke when you
++# start a VPATH build or use an absolute $srcdir.
++#
++# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
++# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
++# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
++# and then we would define $MISSING as
++# MISSING="\${SHELL} $am_aux_dir/missing"
++# This will work as long as MISSING is not called from configure, because
++# unfortunately $(top_srcdir) has no meaning in configure.
++# However there are other variables, like CC, which are often used in
++# configure, and could therefore not use this "fixed" $ac_aux_dir.
++#
++# Another solution, used here, is to always expand $ac_aux_dir to an
++# absolute PATH. The drawback is that using absolute paths prevent a
++# configured tree to be moved without reconfiguration.
++
++AC_DEFUN([AM_AUX_DIR_EXPAND],
++[dnl Rely on autoconf to set up CDPATH properly.
++AC_PREREQ([2.50])dnl
++# expand $ac_aux_dir to an absolute path
++am_aux_dir=`cd $ac_aux_dir && pwd`
++])
++
++# AM_CONDITIONAL -*- Autoconf -*-
++
++# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 6
++
++# AM_CONDITIONAL(NAME, SHELL-CONDITION)
++# -------------------------------------
++# Define a conditional.
++AC_DEFUN([AM_CONDITIONAL],
++[AC_PREREQ(2.52)dnl
++ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
++AC_SUBST([$1_TRUE])
++AC_SUBST([$1_FALSE])
++if $2; then
++ $1_TRUE=
++ $1_FALSE='#'
++else
++ $1_TRUE='#'
++ $1_FALSE=
++fi
++AC_CONFIG_COMMANDS_PRE(
++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
++ AC_MSG_ERROR([conditional "$1" was never defined.
++Usually this means the macro was only invoked conditionally.])
++fi])])
++
++# serial 7 -*- Autoconf -*-
++
++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
++# Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++
++# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
++# written in clear, in which case automake, when reading aclocal.m4,
++# will think it sees a *use*, and therefore will trigger all it's
++# C support machinery. Also note that it means that autoscan, seeing
++# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
++
++
++
++# _AM_DEPENDENCIES(NAME)
++# ----------------------
++# See how the compiler implements dependency checking.
++# NAME is "CC", "CXX", "GCJ", or "OBJC".
++# We try a few techniques and use that to set a single cache variable.
++#
++# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
++# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
++# dependency, and given that the user is not expected to run this macro,
++# just rely on AC_PROG_CC.
++AC_DEFUN([_AM_DEPENDENCIES],
++[AC_REQUIRE([AM_SET_DEPDIR])dnl
++AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
++AC_REQUIRE([AM_MAKE_INCLUDE])dnl
++AC_REQUIRE([AM_DEP_TRACK])dnl
++
++ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
++ [$1], CXX, [depcc="$CXX" am_compiler_list=],
++ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
++ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
++ [depcc="$$1" am_compiler_list=])
++
++AC_CACHE_CHECK([dependency style of $depcc],
++ [am_cv_$1_dependencies_compiler_type],
++[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
++ # We make a subdir and do the tests there. Otherwise we can end up
++ # making bogus files that we don't know about and never remove. For
++ # instance it was reported that on HP-UX the gcc test will end up
++ # making a dummy file named `D' -- because `-MD' means `put the output
++ # in D'.
++ mkdir conftest.dir
++ # Copy depcomp to subdir because otherwise we won't find it if we're
++ # using a relative directory.
++ cp "$am_depcomp" conftest.dir
++ cd conftest.dir
++ # We will build objects and dependencies in a subdirectory because
++ # it helps to detect inapplicable dependency modes. For instance
++ # both Tru64's cc and ICC support -MD to output dependencies as a
++ # side effect of compilation, but ICC will put the dependencies in
++ # the current directory while Tru64 will put them in the object
++ # directory.
++ mkdir sub
++
++ am_cv_$1_dependencies_compiler_type=none
++ if test "$am_compiler_list" = ""; then
++ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
++ fi
++ for depmode in $am_compiler_list; do
++ # Setup a source with many dependencies, because some compilers
++ # like to wrap large dependency lists on column 80 (with \), and
++ # we should not choose a depcomp mode which is confused by this.
++ #
++ # We need to recreate these files for each test, as the compiler may
++ # overwrite some of them when testing with obscure command lines.
++ # This happens at least with the AIX C compiler.
++ : > sub/conftest.c
++ for i in 1 2 3 4 5 6; do
++ echo '#include "conftst'$i'.h"' >> sub/conftest.c
++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
++ # Solaris 8's {/usr,}/bin/sh.
++ touch sub/conftst$i.h
++ done
++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
++
++ case $depmode in
++ nosideeffect)
++ # after this tag, mechanisms are not by side-effect, so they'll
++ # only be used when explicitly requested
++ if test "x$enable_dependency_tracking" = xyes; then
++ continue
++ else
++ break
++ fi
++ ;;
++ none) break ;;
++ esac
++ # We check with `-c' and `-o' for the sake of the "dashmstdout"
++ # mode. It turns out that the SunPro C++ compiler does not properly
++ # handle `-M -o', and we need to detect this.
++ if depmode=$depmode \
++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
++ >/dev/null 2>conftest.err &&
++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
++ # icc doesn't choke on unknown options, it will just issue warnings
++ # or remarks (even with -Werror). So we grep stderr for any message
++ # that says an option was ignored or not supported.
++ # When given -MP, icc 7.0 and 7.1 complain thusly:
++ # icc: Command line warning: ignoring option '-M'; no argument required
++ # The diagnosis changed in icc 8.0:
++ # icc: Command line remark: option '-MP' not supported
++ if (grep 'ignoring option' conftest.err ||
++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
++ am_cv_$1_dependencies_compiler_type=$depmode
++ break
++ fi
++ fi
++ done
++
++ cd ..
++ rm -rf conftest.dir
++else
++ am_cv_$1_dependencies_compiler_type=none
++fi
++])
++AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
++AM_CONDITIONAL([am__fastdep$1], [
++ test "x$enable_dependency_tracking" != xno \
++ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
++])
++
++
++# AM_SET_DEPDIR
++# -------------
++# Choose a directory name for dependency files.
++# This macro is AC_REQUIREd in _AM_DEPENDENCIES
++AC_DEFUN([AM_SET_DEPDIR],
++[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
++AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
++])
++
++
++# AM_DEP_TRACK
++# ------------
++AC_DEFUN([AM_DEP_TRACK],
++[AC_ARG_ENABLE(dependency-tracking,
++[ --disable-dependency-tracking speeds up one-time build
++ --enable-dependency-tracking do not reject slow dependency extractors])
++if test "x$enable_dependency_tracking" != xno; then
++ am_depcomp="$ac_aux_dir/depcomp"
++ AMDEPBACKSLASH='\'
++fi
++AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
++AC_SUBST([AMDEPBACKSLASH])
++])
++
++# Generate code to set up dependency tracking. -*- Autoconf -*-
++
++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++#serial 2
++
++# _AM_OUTPUT_DEPENDENCY_COMMANDS
++# ------------------------------
++AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
++[for mf in $CONFIG_FILES; do
++ # Strip MF so we end up with the name of the file.
++ mf=`echo "$mf" | sed -e 's/:.*$//'`
++ # Check whether this is an Automake generated Makefile or not.
++ # We used to match only the files named `Makefile.in', but
++ # some people rename them; so instead we look at the file content.
++ # Grep'ing the first line is not enough: some people post-process
++ # each Makefile.in and add a new line on top of each file to say so.
++ # So let's grep whole file.
++ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
++ dirpart=`AS_DIRNAME("$mf")`
++ else
++ continue
++ fi
++ grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
++ # Extract the definition of DEP_FILES from the Makefile without
++ # running `make'.
++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
++ test -z "$DEPDIR" && continue
++ # When using ansi2knr, U may be empty or an underscore; expand it
++ U=`sed -n 's/^U = //p' < "$mf"`
++ test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
++ # We invoke sed twice because it is the simplest approach to
++ # changing $(DEPDIR) to its actual value in the expansion.
++ for file in `sed -n '
++ /^DEP_FILES = .*\\\\$/ {
++ s/^DEP_FILES = //
++ :loop
++ s/\\\\$//
++ p
++ n
++ /\\\\$/ b loop
++ p
++ }
++ /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
++ # Make sure the directory exists.
++ test -f "$dirpart/$file" && continue
++ fdir=`AS_DIRNAME(["$file"])`
++ AS_MKDIR_P([$dirpart/$fdir])
++ # echo "creating $dirpart/$file"
++ echo '# dummy' > "$dirpart/$file"
++ done
++done
++])# _AM_OUTPUT_DEPENDENCY_COMMANDS
++
++
++# AM_OUTPUT_DEPENDENCY_COMMANDS
++# -----------------------------
++# This macro should only be invoked once -- use via AC_REQUIRE.
++#
++# This code is only required when automatic dependency tracking
++# is enabled. FIXME. This creates each `.P' file that we will
++# need in order to bootstrap the dependency handling code.
++AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
++[AC_CONFIG_COMMANDS([depfiles],
++ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
++ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
++])
++
++# Do all the work for Automake. -*- Autoconf -*-
++
++# This macro actually does too much some checks are only needed if
++# your package does certain things. But this isn't really a big deal.
++
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
++# Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 11
++
++# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
++# AM_INIT_AUTOMAKE([OPTIONS])
++# -----------------------------------------------
++# The call with PACKAGE and VERSION arguments is the old style
++# call (pre autoconf-2.50), which is being phased out. PACKAGE
++# and VERSION should now be passed to AC_INIT and removed from
++# the call to AM_INIT_AUTOMAKE.
++# We support both call styles for the transition. After
++# the next Automake release, Autoconf can make the AC_INIT
++# arguments mandatory, and then we can depend on a new Autoconf
++# release and drop the old call support.
++AC_DEFUN([AM_INIT_AUTOMAKE],
++[AC_PREREQ([2.58])dnl
++dnl Autoconf wants to disallow AM_ names. We explicitly allow
++dnl the ones we care about.
++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
++AC_REQUIRE([AC_PROG_INSTALL])dnl
++# test to see if srcdir already configured
++if test "`cd $srcdir && pwd`" != "`pwd`" &&
++ test -f $srcdir/config.status; then
++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
++fi
++
++# test whether we have cygpath
++if test -z "$CYGPATH_W"; then
++ if (cygpath --version) >/dev/null 2>/dev/null; then
++ CYGPATH_W='cygpath -w'
++ else
++ CYGPATH_W=echo
++ fi
++fi
++AC_SUBST([CYGPATH_W])
++
++# Define the identity of the package.
++dnl Distinguish between old-style and new-style calls.
++m4_ifval([$2],
++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
++ AC_SUBST([PACKAGE], [$1])dnl
++ AC_SUBST([VERSION], [$2])],
++[_AM_SET_OPTIONS([$1])dnl
++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
++
++_AM_IF_OPTION([no-define],,
++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
++
++# Some tools Automake needs.
++AC_REQUIRE([AM_SANITY_CHECK])dnl
++AC_REQUIRE([AC_ARG_PROGRAM])dnl
++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
++AM_MISSING_PROG(AUTOCONF, autoconf)
++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
++AM_MISSING_PROG(AUTOHEADER, autoheader)
++AM_MISSING_PROG(MAKEINFO, makeinfo)
++AM_MISSING_PROG(AMTAR, tar)
++AM_PROG_INSTALL_SH
++AM_PROG_INSTALL_STRIP
++AC_REQUIRE([AM_PROG_MKDIR_P])dnl
++# We need awk for the "check" target. The system "awk" is bad on
++# some platforms.
++AC_REQUIRE([AC_PROG_AWK])dnl
++AC_REQUIRE([AC_PROG_MAKE_SET])dnl
++AC_REQUIRE([AM_SET_LEADING_DOT])dnl
++
++_AM_IF_OPTION([no-dependencies],,
++[AC_PROVIDE_IFELSE([AC_PROG_CC],
++ [_AM_DEPENDENCIES(CC)],
++ [define([AC_PROG_CC],
++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
++AC_PROVIDE_IFELSE([AC_PROG_CXX],
++ [_AM_DEPENDENCIES(CXX)],
++ [define([AC_PROG_CXX],
++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
++])
++])
++
++
++# When config.status generates a header, we must update the stamp-h file.
++# This file resides in the same directory as the config header
++# that is generated. The stamp files are numbered to have different names.
++
++# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
++# loop where config.status creates the headers, so we can generate
++# our stamp files there.
++AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
++[# Compute $1's index in $config_headers.
++_am_stamp_count=1
++for _am_header in $config_headers :; do
++ case $_am_header in
++ $1 | $1:* )
++ break ;;
++ * )
++ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
++ esac
++done
++echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
++
++# AM_PROG_INSTALL_SH
++# ------------------
++# Define $install_sh.
++
++# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++AC_DEFUN([AM_PROG_INSTALL_SH],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++install_sh=${install_sh-"$am_aux_dir/install-sh"}
++AC_SUBST(install_sh)])
++
++# -*- Autoconf -*-
++# Copyright (C) 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 1
++
++# Check whether the underlying file-system supports filenames
++# with a leading dot. For instance MS-DOS doesn't.
++AC_DEFUN([AM_SET_LEADING_DOT],
++[rm -rf .tst 2>/dev/null
++mkdir .tst 2>/dev/null
++if test -d .tst; then
++ am__leading_dot=.
++else
++ am__leading_dot=_
++fi
++rmdir .tst 2>/dev/null
++AC_SUBST([am__leading_dot])])
++
++# Check to see how 'make' treats includes. -*- Autoconf -*-
++
++# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 2
++
++# AM_MAKE_INCLUDE()
++# -----------------
++# Check to see how make treats includes.
++AC_DEFUN([AM_MAKE_INCLUDE],
++[am_make=${MAKE-make}
++cat > confinc << 'END'
++am__doit:
++ @echo done
++.PHONY: am__doit
++END
++# If we don't find an include directive, just comment out the code.
++AC_MSG_CHECKING([for style of include used by $am_make])
++am__include="#"
++am__quote=
++_am_result=none
++# First try GNU make style include.
++echo "include confinc" > confmf
++# We grep out `Entering directory' and `Leaving directory'
++# messages which can occur if `w' ends up in MAKEFLAGS.
++# In particular we don't look at `^make:' because GNU make might
++# be invoked under some other name (usually "gmake"), in which
++# case it prints its new name instead of `make'.
++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
++ am__include=include
++ am__quote=
++ _am_result=GNU
++fi
++# Now try BSD make style include.
++if test "$am__include" = "#"; then
++ echo '.include "confinc"' > confmf
++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
++ am__include=.include
++ am__quote="\""
++ _am_result=BSD
++ fi
++fi
++AC_SUBST([am__include])
++AC_SUBST([am__quote])
++AC_MSG_RESULT([$_am_result])
++rm -f confinc confmf
++])
++
++# -*- Autoconf -*-
++
++
++# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 3
++
++# AM_MISSING_PROG(NAME, PROGRAM)
++# ------------------------------
++AC_DEFUN([AM_MISSING_PROG],
++[AC_REQUIRE([AM_MISSING_HAS_RUN])
++$1=${$1-"${am_missing_run}$2"}
++AC_SUBST($1)])
++
++
++# AM_MISSING_HAS_RUN
++# ------------------
++# Define MISSING if not defined so far and test if it supports --run.
++# If it does, set am_missing_run to use it, otherwise, to nothing.
++AC_DEFUN([AM_MISSING_HAS_RUN],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
++# Use eval to expand $SHELL
++if eval "$MISSING --run true"; then
++ am_missing_run="$MISSING --run "
++else
++ am_missing_run=
++ AC_MSG_WARN([`missing' script is too old or missing])
++fi
++])
++
++# AM_PROG_MKDIR_P
++# ---------------
++# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
++
++# Copyright (C) 2003, 2004 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
++# created by `make install' are always world readable, even if the
++# installer happens to have an overly restrictive umask (e.g. 077).
++# This was a mistake. There are at least two reasons why we must not
++# use `-m 0755':
++# - it causes special bits like SGID to be ignored,
++# - it may be too restrictive (some setups expect 775 directories).
++#
++# Do not use -m 0755 and let people choose whatever they expect by
++# setting umask.
++#
++# We cannot accept any implementation of `mkdir' that recognizes `-p'.
++# Some implementations (such as Solaris 8's) are not thread-safe: if a
++# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
++# concurrently, both version can detect that a/ is missing, but only
++# one can create it and the other will error out. Consequently we
++# restrict ourselves to GNU make (using the --version option ensures
++# this.)
++AC_DEFUN([AM_PROG_MKDIR_P],
++[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
++ # Keeping the `.' argument allows $(mkdir_p) to be used without
++ # argument. Indeed, we sometimes output rules like
++ # $(mkdir_p) $(somedir)
++ # where $(somedir) is conditionally defined.
++ # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more
++ # expensive solution, as it forces Make to start a sub-shell.)
++ mkdir_p='mkdir -p -- .'
++else
++ # On NextStep and OpenStep, the `mkdir' command does not
++ # recognize any option. It will interpret all options as
++ # directories to create, and then abort because `.' already
++ # exists.
++ for d in ./-p ./--version;
++ do
++ test -d $d && rmdir $d
++ done
++ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
++ if test -f "$ac_aux_dir/mkinstalldirs"; then
++ mkdir_p='$(mkinstalldirs)'
++ else
++ mkdir_p='$(install_sh) -d'
++ fi
++fi
++AC_SUBST([mkdir_p])])
++
++# Helper functions for option handling. -*- Autoconf -*-
++
++# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 2
++
++# _AM_MANGLE_OPTION(NAME)
++# -----------------------
++AC_DEFUN([_AM_MANGLE_OPTION],
++[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
++
++# _AM_SET_OPTION(NAME)
++# ------------------------------
++# Set option NAME. Presently that only means defining a flag for this option.
++AC_DEFUN([_AM_SET_OPTION],
++[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
++
++# _AM_SET_OPTIONS(OPTIONS)
++# ----------------------------------
++# OPTIONS is a space-separated list of Automake options.
++AC_DEFUN([_AM_SET_OPTIONS],
++[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
++
++# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
++# -------------------------------------------
++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
++AC_DEFUN([_AM_IF_OPTION],
++[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
++
++#
++# Check to make sure that the build environment is sane.
++#
++
++# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# serial 3
++
++# AM_SANITY_CHECK
++# ---------------
++AC_DEFUN([AM_SANITY_CHECK],
++[AC_MSG_CHECKING([whether build environment is sane])
++# Just in case
++sleep 1
++echo timestamp > conftest.file
++# Do `set' in a subshell so we don't clobber the current shell's
++# arguments. Must try -L first in case configure is actually a
++# symlink; some systems play weird games with the mod time of symlinks
++# (eg FreeBSD returns the mod time of the symlink's containing
++# directory).
++if (
++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
++ if test "$[*]" = "X"; then
++ # -L didn't work.
++ set X `ls -t $srcdir/configure conftest.file`
++ fi
++ rm -f conftest.file
++ if test "$[*]" != "X $srcdir/configure conftest.file" \
++ && test "$[*]" != "X conftest.file $srcdir/configure"; then
++
++ # If neither matched, then we have a broken ls. This can happen
++ # if, for instance, CONFIG_SHELL is bash and it inherits a
++ # broken ls alias from the environment. This has actually
++ # happened. Such a system could not be considered "sane".
++ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
++alias in your environment])
++ fi
++
++ test "$[2]" = conftest.file
++ )
++then
++ # Ok.
++ :
++else
++ AC_MSG_ERROR([newly created file is older than distributed files!
++Check your system clock])
++fi
++AC_MSG_RESULT(yes)])
++
++# AM_PROG_INSTALL_STRIP
++
++# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# One issue with vendor `install' (even GNU) is that you can't
++# specify the program used to strip binaries. This is especially
++# annoying in cross-compiling environments, where the build's strip
++# is unlikely to handle the host's binaries.
++# Fortunately install-sh will honor a STRIPPROG variable, so we
++# always use install-sh in `make install-strip', and initialize
++# STRIPPROG with the value of the STRIP variable (set by the user).
++AC_DEFUN([AM_PROG_INSTALL_STRIP],
++[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
++# Installed binaries are usually stripped using `strip' when the user
++# run `make install-strip'. However `strip' might not be the right
++# tool to use in cross-compilation environments, therefore Automake
++# will honor the `STRIP' environment variable to overrule this program.
++dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
++if test "$cross_compiling" != no; then
++ AC_CHECK_TOOL([STRIP], [strip], :)
++fi
++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
++AC_SUBST([INSTALL_STRIP_PROGRAM])])
++
+diff --exclude CVS -urN genext2fs-1.3.orig/autogen.sh genext2fs/autogen.sh
+--- genext2fs-1.3.orig/autogen.sh 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/autogen.sh 2004-11-21 23:24:52.000000000 -0700
+@@ -0,0 +1,22 @@
++#!/bin/sh
++
++die() {
++ echo "*** $0 failed :("
++ exit 1
++}
++
++./clean.sh
++
++automake_flags="-c -a"
++for p in aclocal autoconf automake ; do
++ flags=${p}_flags
++ if ! ${p} ${!flags} ; then
++ echo "*** ${p} failed :("
++ exit 1
++ fi
++done
++
++echo
++echo "Now just run:"
++echo "./configure"
++echo "make"
+diff --exclude CVS -urN genext2fs-1.3.orig/clean.sh genext2fs/clean.sh
+--- genext2fs-1.3.orig/clean.sh 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/clean.sh 2004-11-21 23:24:52.000000000 -0700
+@@ -0,0 +1,13 @@
++#!/bin/bash
++
++for f in \
++ `find . -name Makefile.in -o -name Makefile` \
++ `find . -name .libs -o -name .deps` \
++ `find . -name '*.o' -o -name '*.la' -o -name '*.lo' -o -name '*.loT'` \
++ aclocal.m4* autom4te.cache \
++ configure config.* \
++ depcomp install-sh ltmain.sh missing mkinstalldirs libtool \
++ genext2fs
++do
++ rm -rf $f
++done
+diff --exclude CVS -urN genext2fs-1.3.orig/configure genext2fs/configure
+--- genext2fs-1.3.orig/configure 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/configure 2004-12-27 13:03:46.000000000 -0700
+@@ -0,0 +1,4034 @@
++#! /bin/sh
++# Guess values for system-dependent variables and create Makefiles.
++# Generated by GNU Autoconf 2.59.
++#
++# Copyright (C) 2003 Free Software Foundation, Inc.
++# This configure script is free software; the Free Software Foundation
++# gives unlimited permission to copy, distribute and modify it.
++## --------------------- ##
++## M4sh Initialization. ##
++## --------------------- ##
++
++# Be Bourne compatible
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
++ emulate sh
++ NULLCMD=:
++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '${1+"$@"}'='"$@"'
++elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
++ set -o posix
++fi
++DUALCASE=1; export DUALCASE # for MKS sh
++
++# Support unset when possible.
++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
++ as_unset=unset
++else
++ as_unset=false
++fi
++
++
++# Work around bugs in pre-3.0 UWIN ksh.
++$as_unset ENV MAIL MAILPATH
++PS1='$ '
++PS2='> '
++PS4='+ '
++
++# NLS nuisances.
++for as_var in \
++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
++ LC_TELEPHONE LC_TIME
++do
++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
++ eval $as_var=C; export $as_var
++ else
++ $as_unset $as_var
++ fi
++done
++
++# Required to use basename.
++if expr a : '\(a\)' >/dev/null 2>&1; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
++ as_basename=basename
++else
++ as_basename=false
++fi
++
++
++# Name of the executable.
++as_me=`$as_basename "$0" ||
++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
++ X"$0" : 'X\(//\)$' \| \
++ X"$0" : 'X\(/\)$' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X/"$0" |
++ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
++ /^X\/\(\/\/\)$/{ s//\1/; q; }
++ /^X\/\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++
++
++# PATH needs CR, and LINENO needs CR and PATH.
++# Avoid depending upon Character Ranges.
++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
++as_cr_digits='0123456789'
++as_cr_alnum=$as_cr_Letters$as_cr_digits
++
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ echo "#! /bin/sh" >conf$$.sh
++ echo "exit 0" >>conf$$.sh
++ chmod +x conf$$.sh
++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
++ PATH_SEPARATOR=';'
++ else
++ PATH_SEPARATOR=:
++ fi
++ rm -f conf$$.sh
++fi
++
++
++ as_lineno_1=$LINENO
++ as_lineno_2=$LINENO
++ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
++ test "x$as_lineno_1" != "x$as_lineno_2" &&
++ test "x$as_lineno_3" = "x$as_lineno_2" || {
++ # Find who we are. Look in the path if we contain no path at all
++ # relative or not.
++ case $0 in
++ *[\\/]* ) as_myself=$0 ;;
++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
++done
++
++ ;;
++ esac
++ # We did not find ourselves, most probably we were run as `sh COMMAND'
++ # in which case we are not to be found in the path.
++ if test "x$as_myself" = x; then
++ as_myself=$0
++ fi
++ if test ! -f "$as_myself"; then
++ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
++ { (exit 1); exit 1; }; }
++ fi
++ case $CONFIG_SHELL in
++ '')
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for as_base in sh bash ksh sh5; do
++ case $as_dir in
++ /*)
++ if ("$as_dir/$as_base" -c '
++ as_lineno_1=$LINENO
++ as_lineno_2=$LINENO
++ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
++ test "x$as_lineno_1" != "x$as_lineno_2" &&
++ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
++ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
++ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
++ CONFIG_SHELL=$as_dir/$as_base
++ export CONFIG_SHELL
++ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
++ fi;;
++ esac
++ done
++done
++;;
++ esac
++
++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
++ # uniformly replaced by the line number. The first 'sed' inserts a
++ # line-number line before each line; the second 'sed' does the real
++ # work. The second script uses 'N' to pair each line-number line
++ # with the numbered line, and appends trailing '-' during
++ # substitution so that $LINENO is not a special case at line end.
++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
++ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
++ sed '=' <$as_myself |
++ sed '
++ N
++ s,$,-,
++ : loop
++ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
++ t loop
++ s,-$,,
++ s,^['$as_cr_digits']*\n,,
++ ' >$as_me.lineno &&
++ chmod +x $as_me.lineno ||
++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
++ { (exit 1); exit 1; }; }
++
++ # Don't try to exec as it changes $[0], causing all sort of problems
++ # (the dirname of $[0] is not the place where we might find the
++ # original and so on. Autoconf is especially sensible to this).
++ . ./$as_me.lineno
++ # Exit status is that of the last command.
++ exit
++}
++
++
++case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
++ *c*,-n*) ECHO_N= ECHO_C='
++' ECHO_T=' ' ;;
++ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
++ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
++esac
++
++if expr a : '\(a\)' >/dev/null 2>&1; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++rm -f conf$$ conf$$.exe conf$$.file
++echo >conf$$.file
++if ln -s conf$$.file conf$$ 2>/dev/null; then
++ # We could just check for DJGPP; but this test a) works b) is more generic
++ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
++ if test -f conf$$.exe; then
++ # Don't use ln at all; we don't have any links
++ as_ln_s='cp -p'
++ else
++ as_ln_s='ln -s'
++ fi
++elif ln conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s=ln
++else
++ as_ln_s='cp -p'
++fi
++rm -f conf$$ conf$$.exe conf$$.file
++
++if mkdir -p . 2>/dev/null; then
++ as_mkdir_p=:
++else
++ test -d ./-p && rmdir ./-p
++ as_mkdir_p=false
++fi
++
++as_executable_p="test -f"
++
++# Sed expression to map a string onto a valid CPP name.
++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
++
++# Sed expression to map a string onto a valid variable name.
++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
++
++
++# IFS
++# We need space, tab and new line, in precisely that order.
++as_nl='
++'
++IFS=" $as_nl"
++
++# CDPATH.
++$as_unset CDPATH
++
++
++# Name of the host.
++# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
++# so uname gets run too.
++ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
++
++exec 6>&1
++
++#
++# Initializations.
++#
++ac_default_prefix=/usr/local
++ac_config_libobj_dir=.
++cross_compiling=no
++subdirs=
++MFLAGS=
++MAKEFLAGS=
++SHELL=${CONFIG_SHELL-/bin/sh}
++
++# Maximum number of lines to put in a shell here document.
++# This variable seems obsolete. It should probably be removed, and
++# only ac_max_sed_lines should be used.
++: ${ac_max_here_lines=38}
++
++# Identity of this package.
++PACKAGE_NAME=
++PACKAGE_TARNAME=
++PACKAGE_VERSION=
++PACKAGE_STRING=
++PACKAGE_BUGREPORT=
++
++ac_unique_file="genext2fs.c"
++ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LIBOBJS LTLIBOBJS'
++ac_subst_files=''
++
++# Initialize some variables set by options.
++ac_init_help=
++ac_init_version=false
++# The variables have the same names as the options, with
++# dashes changed to underlines.
++cache_file=/dev/null
++exec_prefix=NONE
++no_create=
++no_recursion=
++prefix=NONE
++program_prefix=NONE
++program_suffix=NONE
++program_transform_name=s,x,x,
++silent=
++site=
++srcdir=
++verbose=
++x_includes=NONE
++x_libraries=NONE
++
++# Installation directory options.
++# These are left unexpanded so users can "make install exec_prefix=/foo"
++# and all the variables that are supposed to be based on exec_prefix
++# by default will actually change.
++# Use braces instead of parens because sh, perl, etc. also accept them.
++bindir='${exec_prefix}/bin'
++sbindir='${exec_prefix}/sbin'
++libexecdir='${exec_prefix}/libexec'
++datadir='${prefix}/share'
++sysconfdir='${prefix}/etc'
++sharedstatedir='${prefix}/com'
++localstatedir='${prefix}/var'
++libdir='${exec_prefix}/lib'
++includedir='${prefix}/include'
++oldincludedir='/usr/include'
++infodir='${prefix}/info'
++mandir='${prefix}/man'
++
++ac_prev=
++for ac_option
++do
++ # If the previous option needs an argument, assign it.
++ if test -n "$ac_prev"; then
++ eval "$ac_prev=\$ac_option"
++ ac_prev=
++ continue
++ fi
++
++ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
++
++ # Accept the important Cygnus configure options, so we can diagnose typos.
++
++ case $ac_option in
++
++ -bindir | --bindir | --bindi | --bind | --bin | --bi)
++ ac_prev=bindir ;;
++ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
++ bindir=$ac_optarg ;;
++
++ -build | --build | --buil | --bui | --bu)
++ ac_prev=build_alias ;;
++ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
++ build_alias=$ac_optarg ;;
++
++ -cache-file | --cache-file | --cache-fil | --cache-fi \
++ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
++ ac_prev=cache_file ;;
++ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
++ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
++ cache_file=$ac_optarg ;;
++
++ --config-cache | -C)
++ cache_file=config.cache ;;
++
++ -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
++ ac_prev=datadir ;;
++ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
++ | --da=*)
++ datadir=$ac_optarg ;;
++
++ -disable-* | --disable-*)
++ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
++ # Reject names that are not valid shell variable names.
++ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
++ { (exit 1); exit 1; }; }
++ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
++ eval "enable_$ac_feature=no" ;;
++
++ -enable-* | --enable-*)
++ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
++ # Reject names that are not valid shell variable names.
++ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
++ { (exit 1); exit 1; }; }
++ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
++ case $ac_option in
++ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
++ *) ac_optarg=yes ;;
++ esac
++ eval "enable_$ac_feature='$ac_optarg'" ;;
++
++ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
++ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
++ | --exec | --exe | --ex)
++ ac_prev=exec_prefix ;;
++ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
++ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
++ | --exec=* | --exe=* | --ex=*)
++ exec_prefix=$ac_optarg ;;
++
++ -gas | --gas | --ga | --g)
++ # Obsolete; use --with-gas.
++ with_gas=yes ;;
++
++ -help | --help | --hel | --he | -h)
++ ac_init_help=long ;;
++ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
++ ac_init_help=recursive ;;
++ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
++ ac_init_help=short ;;
++
++ -host | --host | --hos | --ho)
++ ac_prev=host_alias ;;
++ -host=* | --host=* | --hos=* | --ho=*)
++ host_alias=$ac_optarg ;;
++
++ -includedir | --includedir | --includedi | --included | --include \
++ | --includ | --inclu | --incl | --inc)
++ ac_prev=includedir ;;
++ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
++ | --includ=* | --inclu=* | --incl=* | --inc=*)
++ includedir=$ac_optarg ;;
++
++ -infodir | --infodir | --infodi | --infod | --info | --inf)
++ ac_prev=infodir ;;
++ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
++ infodir=$ac_optarg ;;
++
++ -libdir | --libdir | --libdi | --libd)
++ ac_prev=libdir ;;
++ -libdir=* | --libdir=* | --libdi=* | --libd=*)
++ libdir=$ac_optarg ;;
++
++ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
++ | --libexe | --libex | --libe)
++ ac_prev=libexecdir ;;
++ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
++ | --libexe=* | --libex=* | --libe=*)
++ libexecdir=$ac_optarg ;;
++
++ -localstatedir | --localstatedir | --localstatedi | --localstated \
++ | --localstate | --localstat | --localsta | --localst \
++ | --locals | --local | --loca | --loc | --lo)
++ ac_prev=localstatedir ;;
++ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
++ | --localstate=* | --localstat=* | --localsta=* | --localst=* \
++ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
++ localstatedir=$ac_optarg ;;
++
++ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
++ ac_prev=mandir ;;
++ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
++ mandir=$ac_optarg ;;
++
++ -nfp | --nfp | --nf)
++ # Obsolete; use --without-fp.
++ with_fp=no ;;
++
++ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
++ | --no-cr | --no-c | -n)
++ no_create=yes ;;
++
++ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
++ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
++ no_recursion=yes ;;
++
++ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
++ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
++ | --oldin | --oldi | --old | --ol | --o)
++ ac_prev=oldincludedir ;;
++ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
++ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
++ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
++ oldincludedir=$ac_optarg ;;
++
++ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
++ ac_prev=prefix ;;
++ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
++ prefix=$ac_optarg ;;
++
++ -program-prefix | --program-prefix | --program-prefi | --program-pref \
++ | --program-pre | --program-pr | --program-p)
++ ac_prev=program_prefix ;;
++ -program-prefix=* | --program-prefix=* | --program-prefi=* \
++ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
++ program_prefix=$ac_optarg ;;
++
++ -program-suffix | --program-suffix | --program-suffi | --program-suff \
++ | --program-suf | --program-su | --program-s)
++ ac_prev=program_suffix ;;
++ -program-suffix=* | --program-suffix=* | --program-suffi=* \
++ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
++ program_suffix=$ac_optarg ;;
++
++ -program-transform-name | --program-transform-name \
++ | --program-transform-nam | --program-transform-na \
++ | --program-transform-n | --program-transform- \
++ | --program-transform | --program-transfor \
++ | --program-transfo | --program-transf \
++ | --program-trans | --program-tran \
++ | --progr-tra | --program-tr | --program-t)
++ ac_prev=program_transform_name ;;
++ -program-transform-name=* | --program-transform-name=* \
++ | --program-transform-nam=* | --program-transform-na=* \
++ | --program-transform-n=* | --program-transform-=* \
++ | --program-transform=* | --program-transfor=* \
++ | --program-transfo=* | --program-transf=* \
++ | --program-trans=* | --program-tran=* \
++ | --progr-tra=* | --program-tr=* | --program-t=*)
++ program_transform_name=$ac_optarg ;;
++
++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
++ | -silent | --silent | --silen | --sile | --sil)
++ silent=yes ;;
++
++ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
++ ac_prev=sbindir ;;
++ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
++ | --sbi=* | --sb=*)
++ sbindir=$ac_optarg ;;
++
++ -sharedstatedir | --sharedstatedir | --sharedstatedi \
++ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
++ | --sharedst | --shareds | --shared | --share | --shar \
++ | --sha | --sh)
++ ac_prev=sharedstatedir ;;
++ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
++ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
++ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
++ | --sha=* | --sh=*)
++ sharedstatedir=$ac_optarg ;;
++
++ -site | --site | --sit)
++ ac_prev=site ;;
++ -site=* | --site=* | --sit=*)
++ site=$ac_optarg ;;
++
++ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
++ ac_prev=srcdir ;;
++ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
++ srcdir=$ac_optarg ;;
++
++ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
++ | --syscon | --sysco | --sysc | --sys | --sy)
++ ac_prev=sysconfdir ;;
++ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
++ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
++ sysconfdir=$ac_optarg ;;
++
++ -target | --target | --targe | --targ | --tar | --ta | --t)
++ ac_prev=target_alias ;;
++ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
++ target_alias=$ac_optarg ;;
++
++ -v | -verbose | --verbose | --verbos | --verbo | --verb)
++ verbose=yes ;;
++
++ -version | --version | --versio | --versi | --vers | -V)
++ ac_init_version=: ;;
++
++ -with-* | --with-*)
++ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
++ # Reject names that are not valid shell variable names.
++ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid package name: $ac_package" >&2
++ { (exit 1); exit 1; }; }
++ ac_package=`echo $ac_package| sed 's/-/_/g'`
++ case $ac_option in
++ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
++ *) ac_optarg=yes ;;
++ esac
++ eval "with_$ac_package='$ac_optarg'" ;;
++
++ -without-* | --without-*)
++ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
++ # Reject names that are not valid shell variable names.
++ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid package name: $ac_package" >&2
++ { (exit 1); exit 1; }; }
++ ac_package=`echo $ac_package | sed 's/-/_/g'`
++ eval "with_$ac_package=no" ;;
++
++ --x)
++ # Obsolete; use --with-x.
++ with_x=yes ;;
++
++ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
++ | --x-incl | --x-inc | --x-in | --x-i)
++ ac_prev=x_includes ;;
++ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
++ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
++ x_includes=$ac_optarg ;;
++
++ -x-libraries | --x-libraries | --x-librarie | --x-librari \
++ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
++ ac_prev=x_libraries ;;
++ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
++ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
++ x_libraries=$ac_optarg ;;
++
++ -*) { echo "$as_me: error: unrecognized option: $ac_option
++Try \`$0 --help' for more information." >&2
++ { (exit 1); exit 1; }; }
++ ;;
++
++ *=*)
++ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
++ # Reject names that are not valid shell variable names.
++ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
++ { (exit 1); exit 1; }; }
++ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
++ eval "$ac_envvar='$ac_optarg'"
++ export $ac_envvar ;;
++
++ *)
++ # FIXME: should be removed in autoconf 3.0.
++ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
++ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
++ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
++ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
++ ;;
++
++ esac
++done
++
++if test -n "$ac_prev"; then
++ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
++ { echo "$as_me: error: missing argument to $ac_option" >&2
++ { (exit 1); exit 1; }; }
++fi
++
++# Be sure to have absolute paths.
++for ac_var in exec_prefix prefix
++do
++ eval ac_val=$`echo $ac_var`
++ case $ac_val in
++ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
++ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
++ { (exit 1); exit 1; }; };;
++ esac
++done
++
++# Be sure to have absolute paths.
++for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
++ localstatedir libdir includedir oldincludedir infodir mandir
++do
++ eval ac_val=$`echo $ac_var`
++ case $ac_val in
++ [\\/$]* | ?:[\\/]* ) ;;
++ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
++ { (exit 1); exit 1; }; };;
++ esac
++done
++
++# There might be people who depend on the old broken behavior: `$host'
++# used to hold the argument of --host etc.
++# FIXME: To remove some day.
++build=$build_alias
++host=$host_alias
++target=$target_alias
++
++# FIXME: To remove some day.
++if test "x$host_alias" != x; then
++ if test "x$build_alias" = x; then
++ cross_compiling=maybe
++ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
++ If a cross compiler is detected then cross compile mode will be used." >&2
++ elif test "x$build_alias" != "x$host_alias"; then
++ cross_compiling=yes
++ fi
++fi
++
++ac_tool_prefix=
++test -n "$host_alias" && ac_tool_prefix=$host_alias-
++
++test "$silent" = yes && exec 6>/dev/null
++
++
++# Find the source files, if location was not specified.
++if test -z "$srcdir"; then
++ ac_srcdir_defaulted=yes
++ # Try the directory containing this script, then its parent.
++ ac_confdir=`(dirname "$0") 2>/dev/null ||
++$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$0" : 'X\(//\)[^/]' \| \
++ X"$0" : 'X\(//\)$' \| \
++ X"$0" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$0" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++ srcdir=$ac_confdir
++ if test ! -r $srcdir/$ac_unique_file; then
++ srcdir=..
++ fi
++else
++ ac_srcdir_defaulted=no
++fi
++if test ! -r $srcdir/$ac_unique_file; then
++ if test "$ac_srcdir_defaulted" = yes; then
++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
++ { (exit 1); exit 1; }; }
++ else
++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
++ { (exit 1); exit 1; }; }
++ fi
++fi
++(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
++ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
++ { (exit 1); exit 1; }; }
++srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
++ac_env_build_alias_set=${build_alias+set}
++ac_env_build_alias_value=$build_alias
++ac_cv_env_build_alias_set=${build_alias+set}
++ac_cv_env_build_alias_value=$build_alias
++ac_env_host_alias_set=${host_alias+set}
++ac_env_host_alias_value=$host_alias
++ac_cv_env_host_alias_set=${host_alias+set}
++ac_cv_env_host_alias_value=$host_alias
++ac_env_target_alias_set=${target_alias+set}
++ac_env_target_alias_value=$target_alias
++ac_cv_env_target_alias_set=${target_alias+set}
++ac_cv_env_target_alias_value=$target_alias
++ac_env_CC_set=${CC+set}
++ac_env_CC_value=$CC
++ac_cv_env_CC_set=${CC+set}
++ac_cv_env_CC_value=$CC
++ac_env_CFLAGS_set=${CFLAGS+set}
++ac_env_CFLAGS_value=$CFLAGS
++ac_cv_env_CFLAGS_set=${CFLAGS+set}
++ac_cv_env_CFLAGS_value=$CFLAGS
++ac_env_LDFLAGS_set=${LDFLAGS+set}
++ac_env_LDFLAGS_value=$LDFLAGS
++ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
++ac_cv_env_LDFLAGS_value=$LDFLAGS
++ac_env_CPPFLAGS_set=${CPPFLAGS+set}
++ac_env_CPPFLAGS_value=$CPPFLAGS
++ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
++ac_cv_env_CPPFLAGS_value=$CPPFLAGS
++
++#
++# Report the --help message.
++#
++if test "$ac_init_help" = "long"; then
++ # Omit some internal or obsolete options to make the list less imposing.
++ # This message is too long to be a string in the A/UX 3.1 sh.
++ cat <<_ACEOF
++\`configure' configures this package to adapt to many kinds of systems.
++
++Usage: $0 [OPTION]... [VAR=VALUE]...
++
++To assign environment variables (e.g., CC, CFLAGS...), specify them as
++VAR=VALUE. See below for descriptions of some of the useful variables.
++
++Defaults for the options are specified in brackets.
++
++Configuration:
++ -h, --help display this help and exit
++ --help=short display options specific to this package
++ --help=recursive display the short help of all the included packages
++ -V, --version display version information and exit
++ -q, --quiet, --silent do not print \`checking...' messages
++ --cache-file=FILE cache test results in FILE [disabled]
++ -C, --config-cache alias for \`--cache-file=config.cache'
++ -n, --no-create do not create output files
++ --srcdir=DIR find the sources in DIR [configure dir or \`..']
++
++_ACEOF
++
++ cat <<_ACEOF
++Installation directories:
++ --prefix=PREFIX install architecture-independent files in PREFIX
++ [$ac_default_prefix]
++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
++ [PREFIX]
++
++By default, \`make install' will install all the files in
++\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
++an installation prefix other than \`$ac_default_prefix' using \`--prefix',
++for instance \`--prefix=\$HOME'.
++
++For better control, use the options below.
++
++Fine tuning of the installation directories:
++ --bindir=DIR user executables [EPREFIX/bin]
++ --sbindir=DIR system admin executables [EPREFIX/sbin]
++ --libexecdir=DIR program executables [EPREFIX/libexec]
++ --datadir=DIR read-only architecture-independent data [PREFIX/share]
++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
++ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
++ --libdir=DIR object code libraries [EPREFIX/lib]
++ --includedir=DIR C header files [PREFIX/include]
++ --oldincludedir=DIR C header files for non-gcc [/usr/include]
++ --infodir=DIR info documentation [PREFIX/info]
++ --mandir=DIR man documentation [PREFIX/man]
++_ACEOF
++
++ cat <<\_ACEOF
++
++Program names:
++ --program-prefix=PREFIX prepend PREFIX to installed program names
++ --program-suffix=SUFFIX append SUFFIX to installed program names
++ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
++_ACEOF
++fi
++
++if test -n "$ac_init_help"; then
++
++ cat <<\_ACEOF
++
++Optional Features:
++ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
++ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
++ --disable-dependency-tracking speeds up one-time build
++ --enable-dependency-tracking do not reject slow dependency extractors
++
++Some influential environment variables:
++ CC C compiler command
++ CFLAGS C compiler flags
++ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
++ nonstandard directory <lib dir>
++ CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
++ headers in a nonstandard directory <include dir>
++
++Use these variables to override the choices made by `configure' or to help
++it to find libraries and programs with nonstandard names/locations.
++
++_ACEOF
++fi
++
++if test "$ac_init_help" = "recursive"; then
++ # If there are subdirs, report their specific --help.
++ ac_popdir=`pwd`
++ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
++ test -d $ac_dir || continue
++ ac_builddir=.
++
++if test "$ac_dir" != .; then
++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
++ # A "../" for each directory in $ac_dir_suffix.
++ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
++else
++ ac_dir_suffix= ac_top_builddir=
++fi
++
++case $srcdir in
++ .) # No --srcdir option. We are building in place.
++ ac_srcdir=.
++ if test -z "$ac_top_builddir"; then
++ ac_top_srcdir=.
++ else
++ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
++ fi ;;
++ [\\/]* | ?:[\\/]* ) # Absolute path.
++ ac_srcdir=$srcdir$ac_dir_suffix;
++ ac_top_srcdir=$srcdir ;;
++ *) # Relative path.
++ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
++ ac_top_srcdir=$ac_top_builddir$srcdir ;;
++esac
++
++# Do not use `cd foo && pwd` to compute absolute paths, because
++# the directories may not exist.
++case `pwd` in
++.) ac_abs_builddir="$ac_dir";;
++*)
++ case "$ac_dir" in
++ .) ac_abs_builddir=`pwd`;;
++ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
++ *) ac_abs_builddir=`pwd`/"$ac_dir";;
++ esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_top_builddir=${ac_top_builddir}.;;
++*)
++ case ${ac_top_builddir}. in
++ .) ac_abs_top_builddir=$ac_abs_builddir;;
++ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
++ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
++ esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_srcdir=$ac_srcdir;;
++*)
++ case $ac_srcdir in
++ .) ac_abs_srcdir=$ac_abs_builddir;;
++ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
++ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
++ esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_top_srcdir=$ac_top_srcdir;;
++*)
++ case $ac_top_srcdir in
++ .) ac_abs_top_srcdir=$ac_abs_builddir;;
++ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
++ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
++ esac;;
++esac
++
++ cd $ac_dir
++ # Check for guested configure; otherwise get Cygnus style configure.
++ if test -f $ac_srcdir/configure.gnu; then
++ echo
++ $SHELL $ac_srcdir/configure.gnu --help=recursive
++ elif test -f $ac_srcdir/configure; then
++ echo
++ $SHELL $ac_srcdir/configure --help=recursive
++ elif test -f $ac_srcdir/configure.ac ||
++ test -f $ac_srcdir/configure.in; then
++ echo
++ $ac_configure --help
++ else
++ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
++ fi
++ cd "$ac_popdir"
++ done
++fi
++
++test -n "$ac_init_help" && exit 0
++if $ac_init_version; then
++ cat <<\_ACEOF
++
++Copyright (C) 2003 Free Software Foundation, Inc.
++This configure script is free software; the Free Software Foundation
++gives unlimited permission to copy, distribute and modify it.
++_ACEOF
++ exit 0
++fi
++exec 5>config.log
++cat >&5 <<_ACEOF
++This file contains any messages produced by compilers while
++running configure, to aid debugging if configure makes a mistake.
++
++It was created by $as_me, which was
++generated by GNU Autoconf 2.59. Invocation command line was
++
++ $ $0 $@
++
++_ACEOF
++{
++cat <<_ASUNAME
++## --------- ##
++## Platform. ##
++## --------- ##
++
++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
++uname -m = `(uname -m) 2>/dev/null || echo unknown`
++uname -r = `(uname -r) 2>/dev/null || echo unknown`
++uname -s = `(uname -s) 2>/dev/null || echo unknown`
++uname -v = `(uname -v) 2>/dev/null || echo unknown`
++
++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
++/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
++
++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
++hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
++/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
++/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
++
++_ASUNAME
++
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ echo "PATH: $as_dir"
++done
++
++} >&5
++
++cat >&5 <<_ACEOF
++
++
++## ----------- ##
++## Core tests. ##
++## ----------- ##
++
++_ACEOF
++
++
++# Keep a trace of the command line.
++# Strip out --no-create and --no-recursion so they do not pile up.
++# Strip out --silent because we don't want to record it for future runs.
++# Also quote any args containing shell meta-characters.
++# Make two passes to allow for proper duplicate-argument suppression.
++ac_configure_args=
++ac_configure_args0=
++ac_configure_args1=
++ac_sep=
++ac_must_keep_next=false
++for ac_pass in 1 2
++do
++ for ac_arg
++ do
++ case $ac_arg in
++ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
++ | -silent | --silent | --silen | --sile | --sil)
++ continue ;;
++ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
++ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ esac
++ case $ac_pass in
++ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
++ 2)
++ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
++ if test $ac_must_keep_next = true; then
++ ac_must_keep_next=false # Got value, back to normal.
++ else
++ case $ac_arg in
++ *=* | --config-cache | -C | -disable-* | --disable-* \
++ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
++ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
++ | -with-* | --with-* | -without-* | --without-* | --x)
++ case "$ac_configure_args0 " in
++ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
++ esac
++ ;;
++ -* ) ac_must_keep_next=true ;;
++ esac
++ fi
++ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
++ # Get rid of the leading space.
++ ac_sep=" "
++ ;;
++ esac
++ done
++done
++$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
++$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
++
++# When interrupted or exit'd, cleanup temporary files, and complete
++# config.log. We remove comments because anyway the quotes in there
++# would cause problems or look ugly.
++# WARNING: Be sure not to use single quotes in there, as some shells,
++# such as our DU 5.0 friend, will then `close' the trap.
++trap 'exit_status=$?
++ # Save into config.log some information that might help in debugging.
++ {
++ echo
++
++ cat <<\_ASBOX
++## ---------------- ##
++## Cache variables. ##
++## ---------------- ##
++_ASBOX
++ echo
++ # The following way of writing the cache mishandles newlines in values,
++{
++ (set) 2>&1 |
++ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
++ *ac_space=\ *)
++ sed -n \
++ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
++ ;;
++ *)
++ sed -n \
++ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
++ ;;
++ esac;
++}
++ echo
++
++ cat <<\_ASBOX
++## ----------------- ##
++## Output variables. ##
++## ----------------- ##
++_ASBOX
++ echo
++ for ac_var in $ac_subst_vars
++ do
++ eval ac_val=$`echo $ac_var`
++ echo "$ac_var='"'"'$ac_val'"'"'"
++ done | sort
++ echo
++
++ if test -n "$ac_subst_files"; then
++ cat <<\_ASBOX
++## ------------- ##
++## Output files. ##
++## ------------- ##
++_ASBOX
++ echo
++ for ac_var in $ac_subst_files
++ do
++ eval ac_val=$`echo $ac_var`
++ echo "$ac_var='"'"'$ac_val'"'"'"
++ done | sort
++ echo
++ fi
++
++ if test -s confdefs.h; then
++ cat <<\_ASBOX
++## ----------- ##
++## confdefs.h. ##
++## ----------- ##
++_ASBOX
++ echo
++ sed "/^$/d" confdefs.h | sort
++ echo
++ fi
++ test "$ac_signal" != 0 &&
++ echo "$as_me: caught signal $ac_signal"
++ echo "$as_me: exit $exit_status"
++ } >&5
++ rm -f core *.core &&
++ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
++ exit $exit_status
++ ' 0
++for ac_signal in 1 2 13 15; do
++ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
++done
++ac_signal=0
++
++# confdefs.h avoids OS command line length limits that DEFS can exceed.
++rm -rf conftest* confdefs.h
++# AIX cpp loses on an empty file, so make sure it contains at least a newline.
++echo >confdefs.h
++
++# Predefined preprocessor variables.
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_NAME "$PACKAGE_NAME"
++_ACEOF
++
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
++_ACEOF
++
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_VERSION "$PACKAGE_VERSION"
++_ACEOF
++
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_STRING "$PACKAGE_STRING"
++_ACEOF
++
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
++_ACEOF
++
++
++# Let the site file select an alternate cache file if it wants to.
++# Prefer explicitly selected file to automatically selected ones.
++if test -z "$CONFIG_SITE"; then
++ if test "x$prefix" != xNONE; then
++ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
++ else
++ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
++ fi
++fi
++for ac_site_file in $CONFIG_SITE; do
++ if test -r "$ac_site_file"; then
++ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
++echo "$as_me: loading site script $ac_site_file" >&6;}
++ sed 's/^/| /' "$ac_site_file" >&5
++ . "$ac_site_file"
++ fi
++done
++
++if test -r "$cache_file"; then
++ # Some versions of bash will fail to source /dev/null (special
++ # files actually), so we avoid doing that.
++ if test -f "$cache_file"; then
++ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
++echo "$as_me: loading cache $cache_file" >&6;}
++ case $cache_file in
++ [\\/]* | ?:[\\/]* ) . $cache_file;;
++ *) . ./$cache_file;;
++ esac
++ fi
++else
++ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
++echo "$as_me: creating cache $cache_file" >&6;}
++ >$cache_file
++fi
++
++# Check that the precious variables saved in the cache have kept the same
++# value.
++ac_cache_corrupted=false
++for ac_var in `(set) 2>&1 |
++ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
++ eval ac_old_set=\$ac_cv_env_${ac_var}_set
++ eval ac_new_set=\$ac_env_${ac_var}_set
++ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
++ eval ac_new_val="\$ac_env_${ac_var}_value"
++ case $ac_old_set,$ac_new_set in
++ set,)
++ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
++echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
++ ac_cache_corrupted=: ;;
++ ,set)
++ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
++echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
++ ac_cache_corrupted=: ;;
++ ,);;
++ *)
++ if test "x$ac_old_val" != "x$ac_new_val"; then
++ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
++echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
++ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
++echo "$as_me: former value: $ac_old_val" >&2;}
++ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
++echo "$as_me: current value: $ac_new_val" >&2;}
++ ac_cache_corrupted=:
++ fi;;
++ esac
++ # Pass precious variables to config.status.
++ if test "$ac_new_set" = set; then
++ case $ac_new_val in
++ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
++ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
++ *) ac_arg=$ac_var=$ac_new_val ;;
++ esac
++ case " $ac_configure_args " in
++ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
++ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
++ esac
++ fi
++done
++if $ac_cache_corrupted; then
++ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
++echo "$as_me: error: changes in the environment can compromise the build" >&2;}
++ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
++echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
++ { (exit 1); exit 1; }; }
++fi
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++am__api_version="1.8"
++ac_aux_dir=
++for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
++ if test -f $ac_dir/install-sh; then
++ ac_aux_dir=$ac_dir
++ ac_install_sh="$ac_aux_dir/install-sh -c"
++ break
++ elif test -f $ac_dir/install.sh; then
++ ac_aux_dir=$ac_dir
++ ac_install_sh="$ac_aux_dir/install.sh -c"
++ break
++ elif test -f $ac_dir/shtool; then
++ ac_aux_dir=$ac_dir
++ ac_install_sh="$ac_aux_dir/shtool install -c"
++ break
++ fi
++done
++if test -z "$ac_aux_dir"; then
++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
++echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
++ { (exit 1); exit 1; }; }
++fi
++ac_config_guess="$SHELL $ac_aux_dir/config.guess"
++ac_config_sub="$SHELL $ac_aux_dir/config.sub"
++ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
++
++# Find a good install program. We prefer a C program (faster),
++# so one script is as good as another. But avoid the broken or
++# incompatible versions:
++# SysV /etc/install, /usr/sbin/install
++# SunOS /usr/etc/install
++# IRIX /sbin/install
++# AIX /bin/install
++# AmigaOS /C/install, which installs bootblocks on floppy discs
++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
++# AFS /usr/afsws/bin/install, which mishandles nonexistent args
++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
++# OS/2's system install, which has a completely different semantic
++# ./install, which can be erroneously created by make from ./install.sh.
++echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
++if test -z "$INSTALL"; then
++if test "${ac_cv_path_install+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ # Account for people who put trailing slashes in PATH elements.
++case $as_dir/ in
++ ./ | .// | /cC/* | \
++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
++ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
++ /usr/ucb/* ) ;;
++ *)
++ # OSF1 and SCO ODT 3.0 have their own names for install.
++ # Don't use installbsd from OSF since it installs stuff as root
++ # by default.
++ for ac_prog in ginstall scoinst install; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
++ if test $ac_prog = install &&
++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++ # AIX install. It has an incompatible calling convention.
++ :
++ elif test $ac_prog = install &&
++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++ # program-specific install script used by HP pwplus--don't use.
++ :
++ else
++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
++ break 3
++ fi
++ fi
++ done
++ done
++ ;;
++esac
++done
++
++
++fi
++ if test "${ac_cv_path_install+set}" = set; then
++ INSTALL=$ac_cv_path_install
++ else
++ # As a last resort, use the slow shell script. We don't cache a
++ # path for INSTALL within a source directory, because that will
++ # break other packages using the cache if that directory is
++ # removed, or if the path is relative.
++ INSTALL=$ac_install_sh
++ fi
++fi
++echo "$as_me:$LINENO: result: $INSTALL" >&5
++echo "${ECHO_T}$INSTALL" >&6
++
++# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
++# It thinks the first close brace ends the variable substitution.
++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
++
++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
++
++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
++
++echo "$as_me:$LINENO: checking whether build environment is sane" >&5
++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
++# Just in case
++sleep 1
++echo timestamp > conftest.file
++# Do `set' in a subshell so we don't clobber the current shell's
++# arguments. Must try -L first in case configure is actually a
++# symlink; some systems play weird games with the mod time of symlinks
++# (eg FreeBSD returns the mod time of the symlink's containing
++# directory).
++if (
++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
++ if test "$*" = "X"; then
++ # -L didn't work.
++ set X `ls -t $srcdir/configure conftest.file`
++ fi
++ rm -f conftest.file
++ if test "$*" != "X $srcdir/configure conftest.file" \
++ && test "$*" != "X conftest.file $srcdir/configure"; then
++
++ # If neither matched, then we have a broken ls. This can happen
++ # if, for instance, CONFIG_SHELL is bash and it inherits a
++ # broken ls alias from the environment. This has actually
++ # happened. Such a system could not be considered "sane".
++ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
++alias in your environment" >&5
++echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
++alias in your environment" >&2;}
++ { (exit 1); exit 1; }; }
++ fi
++
++ test "$2" = conftest.file
++ )
++then
++ # Ok.
++ :
++else
++ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
++Check your system clock" >&5
++echo "$as_me: error: newly created file is older than distributed files!
++Check your system clock" >&2;}
++ { (exit 1); exit 1; }; }
++fi
++echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6
++test "$program_prefix" != NONE &&
++ program_transform_name="s,^,$program_prefix,;$program_transform_name"
++# Use a double $ so make ignores it.
++test "$program_suffix" != NONE &&
++ program_transform_name="s,\$,$program_suffix,;$program_transform_name"
++# Double any \ or $. echo might interpret backslashes.
++# By default was `s,x,x', remove it if useless.
++cat <<\_ACEOF >conftest.sed
++s/[\\$]/&&/g;s/;s,x,x,$//
++_ACEOF
++program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
++rm conftest.sed
++
++# expand $ac_aux_dir to an absolute path
++am_aux_dir=`cd $ac_aux_dir && pwd`
++
++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
++# Use eval to expand $SHELL
++if eval "$MISSING --run true"; then
++ am_missing_run="$MISSING --run "
++else
++ am_missing_run=
++ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
++echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
++fi
++
++if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
++ # Keeping the `.' argument allows $(mkdir_p) to be used without
++ # argument. Indeed, we sometimes output rules like
++ # $(mkdir_p) $(somedir)
++ # where $(somedir) is conditionally defined.
++ # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more
++ # expensive solution, as it forces Make to start a sub-shell.)
++ mkdir_p='mkdir -p -- .'
++else
++ # On NextStep and OpenStep, the `mkdir' command does not
++ # recognize any option. It will interpret all options as
++ # directories to create, and then abort because `.' already
++ # exists.
++ for d in ./-p ./--version;
++ do
++ test -d $d && rmdir $d
++ done
++ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
++ if test -f "$ac_aux_dir/mkinstalldirs"; then
++ mkdir_p='$(mkinstalldirs)'
++ else
++ mkdir_p='$(install_sh) -d'
++ fi
++fi
++
++for ac_prog in gawk mawk nawk awk
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_AWK+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$AWK"; then
++ ac_cv_prog_AWK="$AWK" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_AWK="$ac_prog"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
++fi
++fi
++AWK=$ac_cv_prog_AWK
++if test -n "$AWK"; then
++ echo "$as_me:$LINENO: result: $AWK" >&5
++echo "${ECHO_T}$AWK" >&6
++else
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++ test -n "$AWK" && break
++done
++
++echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
++set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
++if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ cat >conftest.make <<\_ACEOF
++all:
++ @echo 'ac_maketemp="$(MAKE)"'
++_ACEOF
++# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
++eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
++if test -n "$ac_maketemp"; then
++ eval ac_cv_prog_make_${ac_make}_set=yes
++else
++ eval ac_cv_prog_make_${ac_make}_set=no
++fi
++rm -f conftest.make
++fi
++if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
++ echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6
++ SET_MAKE=
++else
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++ SET_MAKE="MAKE=${MAKE-make}"
++fi
++
++rm -rf .tst 2>/dev/null
++mkdir .tst 2>/dev/null
++if test -d .tst; then
++ am__leading_dot=.
++else
++ am__leading_dot=_
++fi
++rmdir .tst 2>/dev/null
++
++# test to see if srcdir already configured
++if test "`cd $srcdir && pwd`" != "`pwd`" &&
++ test -f $srcdir/config.status; then
++ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
++echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
++ { (exit 1); exit 1; }; }
++fi
++
++# test whether we have cygpath
++if test -z "$CYGPATH_W"; then
++ if (cygpath --version) >/dev/null 2>/dev/null; then
++ CYGPATH_W='cygpath -w'
++ else
++ CYGPATH_W=echo
++ fi
++fi
++
++
++# Define the identity of the package.
++ PACKAGE=genext2fs
++ VERSION=1.3
++
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE "$PACKAGE"
++_ACEOF
++
++
++cat >>confdefs.h <<_ACEOF
++#define VERSION "$VERSION"
++_ACEOF
++
++# Some tools Automake needs.
++
++ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
++
++
++AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
++
++
++AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
++
++
++AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
++
++
++MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
++
++
++AMTAR=${AMTAR-"${am_missing_run}tar"}
++
++install_sh=${install_sh-"$am_aux_dir/install-sh"}
++
++# Installed binaries are usually stripped using `strip' when the user
++# run `make install-strip'. However `strip' might not be the right
++# tool to use in cross-compilation environments, therefore Automake
++# will honor the `STRIP' environment variable to overrule this program.
++if test "$cross_compiling" != no; then
++ if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
++set dummy ${ac_tool_prefix}strip; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_STRIP+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$STRIP"; then
++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
++fi
++fi
++STRIP=$ac_cv_prog_STRIP
++if test -n "$STRIP"; then
++ echo "$as_me:$LINENO: result: $STRIP" >&5
++echo "${ECHO_T}$STRIP" >&6
++else
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++fi
++if test -z "$ac_cv_prog_STRIP"; then
++ ac_ct_STRIP=$STRIP
++ # Extract the first word of "strip", so it can be a program name with args.
++set dummy strip; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$ac_ct_STRIP"; then
++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_ac_ct_STRIP="strip"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
++ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
++fi
++fi
++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
++if test -n "$ac_ct_STRIP"; then
++ echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
++echo "${ECHO_T}$ac_ct_STRIP" >&6
++else
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++ STRIP=$ac_ct_STRIP
++else
++ STRIP="$ac_cv_prog_STRIP"
++fi
++
++fi
++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
++
++# We need awk for the "check" target. The system "awk" is bad on
++# some platforms.
++
++
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
++set dummy ${ac_tool_prefix}gcc; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$CC"; then
++ ac_cv_prog_CC="$CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_CC="${ac_tool_prefix}gcc"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
++fi
++fi
++CC=$ac_cv_prog_CC
++if test -n "$CC"; then
++ echo "$as_me:$LINENO: result: $CC" >&5
++echo "${ECHO_T}$CC" >&6
++else
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++fi
++if test -z "$ac_cv_prog_CC"; then
++ ac_ct_CC=$CC
++ # Extract the first word of "gcc", so it can be a program name with args.
++set dummy gcc; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$ac_ct_CC"; then
++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_ac_ct_CC="gcc"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
++fi
++fi
++ac_ct_CC=$ac_cv_prog_ac_ct_CC
++if test -n "$ac_ct_CC"; then
++ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
++echo "${ECHO_T}$ac_ct_CC" >&6
++else
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++ CC=$ac_ct_CC
++else
++ CC="$ac_cv_prog_CC"
++fi
++
++if test -z "$CC"; then
++ if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
++set dummy ${ac_tool_prefix}cc; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$CC"; then
++ ac_cv_prog_CC="$CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_CC="${ac_tool_prefix}cc"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
++fi
++fi
++CC=$ac_cv_prog_CC
++if test -n "$CC"; then
++ echo "$as_me:$LINENO: result: $CC" >&5
++echo "${ECHO_T}$CC" >&6
++else
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++fi
++if test -z "$ac_cv_prog_CC"; then
++ ac_ct_CC=$CC
++ # Extract the first word of "cc", so it can be a program name with args.
++set dummy cc; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$ac_ct_CC"; then
++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_ac_ct_CC="cc"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
++fi
++fi
++ac_ct_CC=$ac_cv_prog_ac_ct_CC
++if test -n "$ac_ct_CC"; then
++ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
++echo "${ECHO_T}$ac_ct_CC" >&6
++else
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++ CC=$ac_ct_CC
++else
++ CC="$ac_cv_prog_CC"
++fi
++
++fi
++if test -z "$CC"; then
++ # Extract the first word of "cc", so it can be a program name with args.
++set dummy cc; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$CC"; then
++ ac_cv_prog_CC="$CC" # Let the user override the test.
++else
++ ac_prog_rejected=no
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
++ ac_prog_rejected=yes
++ continue
++ fi
++ ac_cv_prog_CC="cc"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
++if test $ac_prog_rejected = yes; then
++ # We found a bogon in the path, so make sure we never use it.
++ set dummy $ac_cv_prog_CC
++ shift
++ if test $# != 0; then
++ # We chose a different compiler from the bogus one.
++ # However, it has the same basename, so the bogon will be chosen
++ # first if we set CC to just the basename; use the full file name.
++ shift
++ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
++ fi
++fi
++fi
++fi
++CC=$ac_cv_prog_CC
++if test -n "$CC"; then
++ echo "$as_me:$LINENO: result: $CC" >&5
++echo "${ECHO_T}$CC" >&6
++else
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++fi
++if test -z "$CC"; then
++ if test -n "$ac_tool_prefix"; then
++ for ac_prog in cl
++ do
++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
++set dummy $ac_tool_prefix$ac_prog; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$CC"; then
++ ac_cv_prog_CC="$CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
++fi
++fi
++CC=$ac_cv_prog_CC
++if test -n "$CC"; then
++ echo "$as_me:$LINENO: result: $CC" >&5
++echo "${ECHO_T}$CC" >&6
++else
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++ test -n "$CC" && break
++ done
++fi
++if test -z "$CC"; then
++ ac_ct_CC=$CC
++ for ac_prog in cl
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$ac_ct_CC"; then
++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_ac_ct_CC="$ac_prog"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
++fi
++fi
++ac_ct_CC=$ac_cv_prog_ac_ct_CC
++if test -n "$ac_ct_CC"; then
++ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
++echo "${ECHO_T}$ac_ct_CC" >&6
++else
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++ test -n "$ac_ct_CC" && break
++done
++
++ CC=$ac_ct_CC
++fi
++
++fi
++
++
++test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
++See \`config.log' for more details." >&5
++echo "$as_me: error: no acceptable C compiler found in \$PATH
++See \`config.log' for more details." >&2;}
++ { (exit 1); exit 1; }; }
++
++# Provide some information about the compiler.
++echo "$as_me:$LINENO:" \
++ "checking for C compiler version" >&5
++ac_compiler=`set X $ac_compile; echo $2`
++{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
++ (eval $ac_compiler --version </dev/null >&5) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }
++{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
++ (eval $ac_compiler -v </dev/null >&5) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }
++{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
++ (eval $ac_compiler -V </dev/null >&5) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }
++
++cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++ac_clean_files_save=$ac_clean_files
++ac_clean_files="$ac_clean_files a.out a.exe b.out"
++# Try to create an executable without -o first, disregard a.out.
++# It will help us diagnose broken compilers, and finding out an intuition
++# of exeext.
++echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
++echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
++ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
++if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
++ (eval $ac_link_default) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; then
++ # Find the output, starting from the most likely. This scheme is
++# not robust to junk in `.', hence go to wildcards (a.*) only as a last
++# resort.
++
++# Be careful to initialize this variable, since it used to be cached.
++# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
++ac_cv_exeext=
++# b.out is created by i960 compilers.
++for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
++do
++ test -f "$ac_file" || continue
++ case $ac_file in
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
++ ;;
++ conftest.$ac_ext )
++ # This is the source file.
++ ;;
++ [ab].out )
++ # We found the default executable, but exeext='' is most
++ # certainly right.
++ break;;
++ *.* )
++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
++ # FIXME: I believe we export ac_cv_exeext for Libtool,
++ # but it would be cool to find out if it's true. Does anybody
++ # maintain Libtool? --akim.
++ export ac_cv_exeext
++ break;;
++ * )
++ break;;
++ esac
++done
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
++See \`config.log' for more details." >&5
++echo "$as_me: error: C compiler cannot create executables
++See \`config.log' for more details." >&2;}
++ { (exit 77); exit 77; }; }
++fi
++
++ac_exeext=$ac_cv_exeext
++echo "$as_me:$LINENO: result: $ac_file" >&5
++echo "${ECHO_T}$ac_file" >&6
++
++# Check the compiler produces executables we can run. If not, either
++# the compiler is broken, or we cross compile.
++echo "$as_me:$LINENO: checking whether the C compiler works" >&5
++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
++# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
++# If not cross compiling, check that we can run a simple program.
++if test "$cross_compiling" != yes; then
++ if { ac_try='./$ac_file'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ cross_compiling=no
++ else
++ if test "$cross_compiling" = maybe; then
++ cross_compiling=yes
++ else
++ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
++If you meant to cross compile, use \`--host'.
++See \`config.log' for more details." >&5
++echo "$as_me: error: cannot run C compiled programs.
++If you meant to cross compile, use \`--host'.
++See \`config.log' for more details." >&2;}
++ { (exit 1); exit 1; }; }
++ fi
++ fi
++fi
++echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6
++
++rm -f a.out a.exe conftest$ac_cv_exeext b.out
++ac_clean_files=$ac_clean_files_save
++# Check the compiler produces executables we can run. If not, either
++# the compiler is broken, or we cross compile.
++echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
++echo "$as_me:$LINENO: result: $cross_compiling" >&5
++echo "${ECHO_T}$cross_compiling" >&6
++
++echo "$as_me:$LINENO: checking for suffix of executables" >&5
++echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; then
++ # If both `conftest.exe' and `conftest' are `present' (well, observable)
++# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
++# work properly (i.e., refer to `conftest.exe'), while it won't with
++# `rm'.
++for ac_file in conftest.exe conftest conftest.*; do
++ test -f "$ac_file" || continue
++ case $ac_file in
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
++ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
++ export ac_cv_exeext
++ break;;
++ * ) break;;
++ esac
++done
++else
++ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
++See \`config.log' for more details." >&5
++echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
++See \`config.log' for more details." >&2;}
++ { (exit 1); exit 1; }; }
++fi
++
++rm -f conftest$ac_cv_exeext
++echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
++echo "${ECHO_T}$ac_cv_exeext" >&6
++
++rm -f conftest.$ac_ext
++EXEEXT=$ac_cv_exeext
++ac_exeext=$EXEEXT
++echo "$as_me:$LINENO: checking for suffix of object files" >&5
++echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
++if test "${ac_cv_objext+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.o conftest.obj
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; then
++ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
++ case $ac_file in
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
++ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
++ break;;
++ esac
++done
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
++See \`config.log' for more details." >&5
++echo "$as_me: error: cannot compute suffix of object files: cannot compile
++See \`config.log' for more details." >&2;}
++ { (exit 1); exit 1; }; }
++fi
++
++rm -f conftest.$ac_cv_objext conftest.$ac_ext
++fi
++echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
++echo "${ECHO_T}$ac_cv_objext" >&6
++OBJEXT=$ac_cv_objext
++ac_objext=$OBJEXT
++echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
++if test "${ac_cv_c_compiler_gnu+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++
++int
++main ()
++{
++#ifndef __GNUC__
++ choke me
++#endif
++
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_compiler_gnu=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_compiler_gnu=no
++fi
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
++ac_cv_c_compiler_gnu=$ac_compiler_gnu
++
++fi
++echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
++GCC=`test $ac_compiler_gnu = yes && echo yes`
++ac_test_CFLAGS=${CFLAGS+set}
++ac_save_CFLAGS=$CFLAGS
++CFLAGS="-g"
++echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
++if test "${ac_cv_prog_cc_g+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_prog_cc_g=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_prog_cc_g=no
++fi
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
++if test "$ac_test_CFLAGS" = set; then
++ CFLAGS=$ac_save_CFLAGS
++elif test $ac_cv_prog_cc_g = yes; then
++ if test "$GCC" = yes; then
++ CFLAGS="-g -O2"
++ else
++ CFLAGS="-g"
++ fi
++else
++ if test "$GCC" = yes; then
++ CFLAGS="-O2"
++ else
++ CFLAGS=
++ fi
++fi
++echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
++echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
++if test "${ac_cv_prog_cc_stdc+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ ac_cv_prog_cc_stdc=no
++ac_save_CC=$CC
++cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#include <stdarg.h>
++#include <stdio.h>
++#include <sys/types.h>
++#include <sys/stat.h>
++/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
++struct buf { int x; };
++FILE * (*rcsopen) (struct buf *, struct stat *, int);
++static char *e (p, i)
++ char **p;
++ int i;
++{
++ return p[i];
++}
++static char *f (char * (*g) (char **, int), char **p, ...)
++{
++ char *s;
++ va_list v;
++ va_start (v,p);
++ s = g (p, va_arg (v,int));
++ va_end (v);
++ return s;
++}
+
-+genext2fs: $(OBJS)
-+ $(CC) $(CFLAGS) -o $@ $(OBJS)
++/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
++ function prototypes and stuff, but not '\xHH' hex character constants.
++ These don't provoke an error unfortunately, instead are silently treated
++ as 'x'. The following induces an error, until -std1 is added to get
++ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
++ array size at least. It's necessary to write '\x00'==0 to get something
++ that's true only with -std1. */
++int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
-+$(OBJS): %.o : %.c
-+ $(CC) $(CFLAGS) -c $< -o $@
++int test (int i, double x);
++struct s1 {int (*f) (int a);};
++struct s2 {int (*f) (double a);};
++int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
++int argc;
++char **argv;
++int
++main ()
++{
++return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
++ ;
++ return 0;
++}
++_ACEOF
++# Don't try gcc -ansi; that turns off useful extensions and
++# breaks some systems' header files.
++# AIX -qlanglvl=ansi
++# Ultrix and OSF/1 -std1
++# HP-UX 10.20 and later -Ae
++# HP-UX older versions -Aa -D_HPUX_SOURCE
++# SVR4 -Xc -D__EXTENSIONS__
++for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
++do
++ CC="$ac_save_CC $ac_arg"
++ rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_prog_cc_stdc=$ac_arg
++break
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
+
-+$(OBJS): Makefile
++fi
++rm -f conftest.err conftest.$ac_objext
++done
++rm -f conftest.$ac_ext conftest.$ac_objext
++CC=$ac_save_CC
+
-+install:
-+ $(INSTALL) -d $(DESTDIR)/usr/bin/
-+ $(INSTALL) -m 755 genext2fs $(DESTDIR)/usr/bin/
-+ $(INSTALL) -d $(DESTDIR)/usr/share/man/man8/
-+ $(INSTALL) -m 644 genext2fs.8 $(DESTDIR)/usr/share/man/man8/
++fi
+
-+clean:
-+ rm -rf *.o *.a core genext2fs
-+ rm -rf test ext2.img
++case "x$ac_cv_prog_cc_stdc" in
++ x|xno)
++ echo "$as_me:$LINENO: result: none needed" >&5
++echo "${ECHO_T}none needed" >&6 ;;
++ *)
++ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
++echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
++ CC="$CC $ac_cv_prog_cc_stdc" ;;
++esac
+
-+check: all
-+ mkdir -p test
-+ dd if=/dev/zero of=test/zero count=1
-+ ./genext2fs -b 4096 -d test ext2.img
-+
-+ md5=`md5sum ext2.img | cut -f 1 -d " "`; \
-+ if [ "$$md5" != "89471302d95f96a76fbb2cff98182cde" ] ; then \
-+ echo "test failed."; \
-+ else \
-+ echo "test succeeded."; \
++# Some people use a C++ compiler to compile C. Since we use `exit',
++# in C++ we need to declare it. In case someone uses the same compiler
++# for both compiling C and C++ we need to have the C++ compiler decide
++# the declaration of exit, since it's the most demanding environment.
++cat >conftest.$ac_ext <<_ACEOF
++#ifndef __cplusplus
++ choke me
++#endif
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ for ac_declaration in \
++ '' \
++ 'extern "C" void std::exit (int) throw (); using std::exit;' \
++ 'extern "C" void std::exit (int); using std::exit;' \
++ 'extern "C" void exit (int) throw ();' \
++ 'extern "C" void exit (int);' \
++ 'void exit (int);'
++do
++ cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++$ac_declaration
++#include <stdlib.h>
++int
++main ()
++{
++exit (42);
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ :
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++continue
++fi
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
++ cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++$ac_declaration
++int
++main ()
++{
++exit (42);
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ break
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++fi
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
++done
++rm -f conftest*
++if test -n "$ac_declaration"; then
++ echo '#ifdef __cplusplus' >>confdefs.h
++ echo $ac_declaration >>confdefs.h
++ echo '#endif' >>confdefs.h
++fi
++
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++fi
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++DEPDIR="${am__leading_dot}deps"
++
++ ac_config_commands="$ac_config_commands depfiles"
++
++
++am_make=${MAKE-make}
++cat > confinc << 'END'
++am__doit:
++ @echo done
++.PHONY: am__doit
++END
++# If we don't find an include directive, just comment out the code.
++echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
++echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
++am__include="#"
++am__quote=
++_am_result=none
++# First try GNU make style include.
++echo "include confinc" > confmf
++# We grep out `Entering directory' and `Leaving directory'
++# messages which can occur if `w' ends up in MAKEFLAGS.
++# In particular we don't look at `^make:' because GNU make might
++# be invoked under some other name (usually "gmake"), in which
++# case it prints its new name instead of `make'.
++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
++ am__include=include
++ am__quote=
++ _am_result=GNU
++fi
++# Now try BSD make style include.
++if test "$am__include" = "#"; then
++ echo '.include "confinc"' > confmf
++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
++ am__include=.include
++ am__quote="\""
++ _am_result=BSD
++ fi
++fi
++
++
++echo "$as_me:$LINENO: result: $_am_result" >&5
++echo "${ECHO_T}$_am_result" >&6
++rm -f confinc confmf
++
++# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
++if test "${enable_dependency_tracking+set}" = set; then
++ enableval="$enable_dependency_tracking"
++
++fi;
++if test "x$enable_dependency_tracking" != xno; then
++ am_depcomp="$ac_aux_dir/depcomp"
++ AMDEPBACKSLASH='\'
++fi
++
++
++if test "x$enable_dependency_tracking" != xno; then
++ AMDEP_TRUE=
++ AMDEP_FALSE='#'
++else
++ AMDEP_TRUE='#'
++ AMDEP_FALSE=
++fi
++
++
++
++
++depcc="$CC" am_compiler_list=
++
++echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
++if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
++ # We make a subdir and do the tests there. Otherwise we can end up
++ # making bogus files that we don't know about and never remove. For
++ # instance it was reported that on HP-UX the gcc test will end up
++ # making a dummy file named `D' -- because `-MD' means `put the output
++ # in D'.
++ mkdir conftest.dir
++ # Copy depcomp to subdir because otherwise we won't find it if we're
++ # using a relative directory.
++ cp "$am_depcomp" conftest.dir
++ cd conftest.dir
++ # We will build objects and dependencies in a subdirectory because
++ # it helps to detect inapplicable dependency modes. For instance
++ # both Tru64's cc and ICC support -MD to output dependencies as a
++ # side effect of compilation, but ICC will put the dependencies in
++ # the current directory while Tru64 will put them in the object
++ # directory.
++ mkdir sub
++
++ am_cv_CC_dependencies_compiler_type=none
++ if test "$am_compiler_list" = ""; then
++ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
++ fi
++ for depmode in $am_compiler_list; do
++ # Setup a source with many dependencies, because some compilers
++ # like to wrap large dependency lists on column 80 (with \), and
++ # we should not choose a depcomp mode which is confused by this.
++ #
++ # We need to recreate these files for each test, as the compiler may
++ # overwrite some of them when testing with obscure command lines.
++ # This happens at least with the AIX C compiler.
++ : > sub/conftest.c
++ for i in 1 2 3 4 5 6; do
++ echo '#include "conftst'$i'.h"' >> sub/conftest.c
++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
++ # Solaris 8's {/usr,}/bin/sh.
++ touch sub/conftst$i.h
++ done
++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
++
++ case $depmode in
++ nosideeffect)
++ # after this tag, mechanisms are not by side-effect, so they'll
++ # only be used when explicitly requested
++ if test "x$enable_dependency_tracking" = xyes; then
++ continue
++ else
++ break
++ fi
++ ;;
++ none) break ;;
++ esac
++ # We check with `-c' and `-o' for the sake of the "dashmstdout"
++ # mode. It turns out that the SunPro C++ compiler does not properly
++ # handle `-M -o', and we need to detect this.
++ if depmode=$depmode \
++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
++ >/dev/null 2>conftest.err &&
++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
++ # icc doesn't choke on unknown options, it will just issue warnings
++ # or remarks (even with -Werror). So we grep stderr for any message
++ # that says an option was ignored or not supported.
++ # When given -MP, icc 7.0 and 7.1 complain thusly:
++ # icc: Command line warning: ignoring option '-M'; no argument required
++ # The diagnosis changed in icc 8.0:
++ # icc: Command line remark: option '-MP' not supported
++ if (grep 'ignoring option' conftest.err ||
++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
++ am_cv_CC_dependencies_compiler_type=$depmode
++ break
++ fi
++ fi
++ done
++
++ cd ..
++ rm -rf conftest.dir
++else
++ am_cv_CC_dependencies_compiler_type=none
++fi
++
++fi
++echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
++CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
++
++
++
++if
++ test "x$enable_dependency_tracking" != xno \
++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
++ am__fastdepCC_TRUE=
++ am__fastdepCC_FALSE='#'
++else
++ am__fastdepCC_TRUE='#'
++ am__fastdepCC_FALSE=
++fi
++
++
++# Find a good install program. We prefer a C program (faster),
++# so one script is as good as another. But avoid the broken or
++# incompatible versions:
++# SysV /etc/install, /usr/sbin/install
++# SunOS /usr/etc/install
++# IRIX /sbin/install
++# AIX /bin/install
++# AmigaOS /C/install, which installs bootblocks on floppy discs
++# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
++# AFS /usr/afsws/bin/install, which mishandles nonexistent args
++# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
++# OS/2's system install, which has a completely different semantic
++# ./install, which can be erroneously created by make from ./install.sh.
++echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
++if test -z "$INSTALL"; then
++if test "${ac_cv_path_install+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ # Account for people who put trailing slashes in PATH elements.
++case $as_dir/ in
++ ./ | .// | /cC/* | \
++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
++ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
++ /usr/ucb/* ) ;;
++ *)
++ # OSF1 and SCO ODT 3.0 have their own names for install.
++ # Don't use installbsd from OSF since it installs stuff as root
++ # by default.
++ for ac_prog in ginstall scoinst install; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
++ if test $ac_prog = install &&
++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++ # AIX install. It has an incompatible calling convention.
++ :
++ elif test $ac_prog = install &&
++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++ # program-specific install script used by HP pwplus--don't use.
++ :
++ else
++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
++ break 3
++ fi
+ fi
-+
-+# test genext2fs by creating the image and comparing checksums
-+test: all
-+ sh ./test.sh
++ done
++ done
++ ;;
++esac
++done
++
++
++fi
++ if test "${ac_cv_path_install+set}" = set; then
++ INSTALL=$ac_cv_path_install
++ else
++ # As a last resort, use the slow shell script. We don't cache a
++ # path for INSTALL within a source directory, because that will
++ # break other packages using the cache if that directory is
++ # removed, or if the path is relative.
++ INSTALL=$ac_install_sh
++ fi
++fi
++echo "$as_me:$LINENO: result: $INSTALL" >&5
++echo "${ECHO_T}$INSTALL" >&6
++
++# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
++# It thinks the first close brace ends the variable substitution.
++test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
++
++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
++
++test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
++
++ ac_config_files="$ac_config_files Makefile"
++cat >confcache <<\_ACEOF
++# This file is a shell script that caches the results of configure
++# tests run on this system so they can be shared between configure
++# scripts and configure runs, see configure's option --config-cache.
++# It is not useful on other systems. If it contains results you don't
++# want to keep, you may remove or edit it.
++#
++# config.status only pays attention to the cache file if you give it
++# the --recheck option to rerun configure.
++#
++# `ac_cv_env_foo' variables (set or unset) will be overridden when
++# loading this file, other *unset* `ac_cv_foo' will be assigned the
++# following values.
++
++_ACEOF
++
++# The following way of writing the cache mishandles newlines in values,
++# but we know of no workaround that is simple, portable, and efficient.
++# So, don't put newlines in cache variables' values.
++# Ultrix sh set writes to stderr and can't be redirected directly,
++# and sets the high bit in the cache file unless we assign to the vars.
++{
++ (set) 2>&1 |
++ case `(ac_space=' '; set | grep ac_space) 2>&1` in
++ *ac_space=\ *)
++ # `set' does not quote correctly, so add quotes (double-quote
++ # substitution turns \\\\ into \\, and sed turns \\ into \).
++ sed -n \
++ "s/'/'\\\\''/g;
++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
++ ;;
++ *)
++ # `set' quotes correctly as required by POSIX, so do not add quotes.
++ sed -n \
++ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
++ ;;
++ esac;
++} |
++ sed '
++ t clear
++ : clear
++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
++ t end
++ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
++ : end' >>confcache
++if diff $cache_file confcache >/dev/null 2>&1; then :; else
++ if test -w $cache_file; then
++ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
++ cat confcache >$cache_file
++ else
++ echo "not updating unwritable cache $cache_file"
++ fi
++fi
++rm -f confcache
++
++test "x$prefix" = xNONE && prefix=$ac_default_prefix
++# Let make expand exec_prefix.
++test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
++
++# VPATH may cause trouble with some makes, so we remove $(srcdir),
++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
++# trailing colons and then remove the whole line if VPATH becomes empty
++# (actually we leave an empty line to preserve line numbers).
++if test "x$srcdir" = x.; then
++ ac_vpsub='/^[ ]*VPATH[ ]*=/{
++s/:*\$(srcdir):*/:/;
++s/:*\${srcdir}:*/:/;
++s/:*@srcdir@:*/:/;
++s/^\([^=]*=[ ]*\):*/\1/;
++s/:*$//;
++s/^[^=]*=[ ]*$//;
++}'
++fi
++
++# Transform confdefs.h into DEFS.
++# Protect against shell expansion while executing Makefile rules.
++# Protect against Makefile macro expansion.
++#
++# If the first sed substitution is executed (which looks for macros that
++# take arguments), then we branch to the quote section. Otherwise,
++# look for a macro that doesn't take arguments.
++cat >confdef2opt.sed <<\_ACEOF
++t clear
++: clear
++s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
++t quote
++s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
++t quote
++d
++: quote
++s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
++s,\[,\\&,g
++s,\],\\&,g
++s,\$,$$,g
++p
++_ACEOF
++# We use echo to avoid assuming a particular line-breaking character.
++# The extra dot is to prevent the shell from consuming trailing
++# line-breaks from the sub-command output. A line-break within
++# single-quotes doesn't work because, if this script is created in a
++# platform that uses two characters for line-breaks (e.g., DOS), tr
++# would break.
++ac_LF_and_DOT=`echo; echo .`
++DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
++rm -f confdef2opt.sed
++
++
++ac_libobjs=
++ac_ltlibobjs=
++for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
++ # 1. Remove the extension, and $U if already installed.
++ ac_i=`echo "$ac_i" |
++ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
++ # 2. Add them.
++ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
++ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
++done
++LIBOBJS=$ac_libobjs
++
++LTLIBOBJS=$ac_ltlibobjs
++
++
++if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
++ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
++Usually this means the macro was only invoked conditionally." >&5
++echo "$as_me: error: conditional \"AMDEP\" was never defined.
++Usually this means the macro was only invoked conditionally." >&2;}
++ { (exit 1); exit 1; }; }
++fi
++if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
++ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
++Usually this means the macro was only invoked conditionally." >&5
++echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
++Usually this means the macro was only invoked conditionally." >&2;}
++ { (exit 1); exit 1; }; }
++fi
++
++: ${CONFIG_STATUS=./config.status}
++ac_clean_files_save=$ac_clean_files
++ac_clean_files="$ac_clean_files $CONFIG_STATUS"
++{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
++echo "$as_me: creating $CONFIG_STATUS" >&6;}
++cat >$CONFIG_STATUS <<_ACEOF
++#! $SHELL
++# Generated by $as_me.
++# Run this file to recreate the current configuration.
++# Compiler output produced by configure, useful for debugging
++# configure, is in config.log if it exists.
++
++debug=false
++ac_cs_recheck=false
++ac_cs_silent=false
++SHELL=\${CONFIG_SHELL-$SHELL}
++_ACEOF
++
++cat >>$CONFIG_STATUS <<\_ACEOF
++## --------------------- ##
++## M4sh Initialization. ##
++## --------------------- ##
++
++# Be Bourne compatible
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
++ emulate sh
++ NULLCMD=:
++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '${1+"$@"}'='"$@"'
++elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
++ set -o posix
++fi
++DUALCASE=1; export DUALCASE # for MKS sh
++
++# Support unset when possible.
++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
++ as_unset=unset
++else
++ as_unset=false
++fi
++
++
++# Work around bugs in pre-3.0 UWIN ksh.
++$as_unset ENV MAIL MAILPATH
++PS1='$ '
++PS2='> '
++PS4='+ '
++
++# NLS nuisances.
++for as_var in \
++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
++ LC_TELEPHONE LC_TIME
++do
++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
++ eval $as_var=C; export $as_var
++ else
++ $as_unset $as_var
++ fi
++done
++
++# Required to use basename.
++if expr a : '\(a\)' >/dev/null 2>&1; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
++ as_basename=basename
++else
++ as_basename=false
++fi
++
++
++# Name of the executable.
++as_me=`$as_basename "$0" ||
++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
++ X"$0" : 'X\(//\)$' \| \
++ X"$0" : 'X\(/\)$' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X/"$0" |
++ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
++ /^X\/\(\/\/\)$/{ s//\1/; q; }
++ /^X\/\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++
++
++# PATH needs CR, and LINENO needs CR and PATH.
++# Avoid depending upon Character Ranges.
++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
++as_cr_digits='0123456789'
++as_cr_alnum=$as_cr_Letters$as_cr_digits
++
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ echo "#! /bin/sh" >conf$$.sh
++ echo "exit 0" >>conf$$.sh
++ chmod +x conf$$.sh
++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
++ PATH_SEPARATOR=';'
++ else
++ PATH_SEPARATOR=:
++ fi
++ rm -f conf$$.sh
++fi
++
++
++ as_lineno_1=$LINENO
++ as_lineno_2=$LINENO
++ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
++ test "x$as_lineno_1" != "x$as_lineno_2" &&
++ test "x$as_lineno_3" = "x$as_lineno_2" || {
++ # Find who we are. Look in the path if we contain no path at all
++ # relative or not.
++ case $0 in
++ *[\\/]* ) as_myself=$0 ;;
++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
++done
++
++ ;;
++ esac
++ # We did not find ourselves, most probably we were run as `sh COMMAND'
++ # in which case we are not to be found in the path.
++ if test "x$as_myself" = x; then
++ as_myself=$0
++ fi
++ if test ! -f "$as_myself"; then
++ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
++echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
++ { (exit 1); exit 1; }; }
++ fi
++ case $CONFIG_SHELL in
++ '')
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for as_base in sh bash ksh sh5; do
++ case $as_dir in
++ /*)
++ if ("$as_dir/$as_base" -c '
++ as_lineno_1=$LINENO
++ as_lineno_2=$LINENO
++ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
++ test "x$as_lineno_1" != "x$as_lineno_2" &&
++ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
++ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
++ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
++ CONFIG_SHELL=$as_dir/$as_base
++ export CONFIG_SHELL
++ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
++ fi;;
++ esac
++ done
++done
++;;
++ esac
++
++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
++ # uniformly replaced by the line number. The first 'sed' inserts a
++ # line-number line before each line; the second 'sed' does the real
++ # work. The second script uses 'N' to pair each line-number line
++ # with the numbered line, and appends trailing '-' during
++ # substitution so that $LINENO is not a special case at line end.
++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
++ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
++ sed '=' <$as_myself |
++ sed '
++ N
++ s,$,-,
++ : loop
++ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
++ t loop
++ s,-$,,
++ s,^['$as_cr_digits']*\n,,
++ ' >$as_me.lineno &&
++ chmod +x $as_me.lineno ||
++ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
++echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
++ { (exit 1); exit 1; }; }
++
++ # Don't try to exec as it changes $[0], causing all sort of problems
++ # (the dirname of $[0] is not the place where we might find the
++ # original and so on. Autoconf is especially sensible to this).
++ . ./$as_me.lineno
++ # Exit status is that of the last command.
++ exit
++}
++
++
++case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
++ *c*,-n*) ECHO_N= ECHO_C='
++' ECHO_T=' ' ;;
++ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
++ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
++esac
++
++if expr a : '\(a\)' >/dev/null 2>&1; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++rm -f conf$$ conf$$.exe conf$$.file
++echo >conf$$.file
++if ln -s conf$$.file conf$$ 2>/dev/null; then
++ # We could just check for DJGPP; but this test a) works b) is more generic
++ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
++ if test -f conf$$.exe; then
++ # Don't use ln at all; we don't have any links
++ as_ln_s='cp -p'
++ else
++ as_ln_s='ln -s'
++ fi
++elif ln conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s=ln
++else
++ as_ln_s='cp -p'
++fi
++rm -f conf$$ conf$$.exe conf$$.file
++
++if mkdir -p . 2>/dev/null; then
++ as_mkdir_p=:
++else
++ test -d ./-p && rmdir ./-p
++ as_mkdir_p=false
++fi
++
++as_executable_p="test -f"
++
++# Sed expression to map a string onto a valid CPP name.
++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
++
++# Sed expression to map a string onto a valid variable name.
++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
++
++
++# IFS
++# We need space, tab and new line, in precisely that order.
++as_nl='
++'
++IFS=" $as_nl"
++
++# CDPATH.
++$as_unset CDPATH
++
++exec 6>&1
++
++# Open the log real soon, to keep \$[0] and so on meaningful, and to
++# report actual input values of CONFIG_FILES etc. instead of their
++# values after options handling. Logging --version etc. is OK.
++exec 5>>config.log
++{
++ echo
++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
++## Running $as_me. ##
++_ASBOX
++} >&5
++cat >&5 <<_CSEOF
++
++This file was extended by $as_me, which was
++generated by GNU Autoconf 2.59. Invocation command line was
++
++ CONFIG_FILES = $CONFIG_FILES
++ CONFIG_HEADERS = $CONFIG_HEADERS
++ CONFIG_LINKS = $CONFIG_LINKS
++ CONFIG_COMMANDS = $CONFIG_COMMANDS
++ $ $0 $@
++
++_CSEOF
++echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
++echo >&5
++_ACEOF
++
++# Files that config.status was made for.
++if test -n "$ac_config_files"; then
++ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
++fi
++
++if test -n "$ac_config_headers"; then
++ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
++fi
++
++if test -n "$ac_config_links"; then
++ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
++fi
++
++if test -n "$ac_config_commands"; then
++ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
++fi
++
++cat >>$CONFIG_STATUS <<\_ACEOF
++
++ac_cs_usage="\
++\`$as_me' instantiates files from templates according to the
++current configuration.
++
++Usage: $0 [OPTIONS] [FILE]...
++
++ -h, --help print this help, then exit
++ -V, --version print version number, then exit
++ -q, --quiet do not print progress messages
++ -d, --debug don't remove temporary files
++ --recheck update $as_me by reconfiguring in the same conditions
++ --file=FILE[:TEMPLATE]
++ instantiate the configuration file FILE
++
++Configuration files:
++$config_files
++
++Configuration commands:
++$config_commands
++
++Report bugs to <bug-autoconf@gnu.org>."
++_ACEOF
++
++cat >>$CONFIG_STATUS <<_ACEOF
++ac_cs_version="\\
++config.status
++configured by $0, generated by GNU Autoconf 2.59,
++ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
++
++Copyright (C) 2003 Free Software Foundation, Inc.
++This config.status script is free software; the Free Software Foundation
++gives unlimited permission to copy, distribute and modify it."
++srcdir=$srcdir
++INSTALL="$INSTALL"
++_ACEOF
++
++cat >>$CONFIG_STATUS <<\_ACEOF
++# If no file are specified by the user, then we need to provide default
++# value. By we need to know if files were specified by the user.
++ac_need_defaults=:
++while test $# != 0
++do
++ case $1 in
++ --*=*)
++ ac_option=`expr "x$1" : 'x\([^=]*\)='`
++ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
++ ac_shift=:
++ ;;
++ -*)
++ ac_option=$1
++ ac_optarg=$2
++ ac_shift=shift
++ ;;
++ *) # This is not an option, so the user has probably given explicit
++ # arguments.
++ ac_option=$1
++ ac_need_defaults=false;;
++ esac
++
++ case $ac_option in
++ # Handling of the options.
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF
++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
++ ac_cs_recheck=: ;;
++ --version | --vers* | -V )
++ echo "$ac_cs_version"; exit 0 ;;
++ --he | --h)
++ # Conflict between --help and --header
++ { { echo "$as_me:$LINENO: error: ambiguous option: $1
++Try \`$0 --help' for more information." >&5
++echo "$as_me: error: ambiguous option: $1
++Try \`$0 --help' for more information." >&2;}
++ { (exit 1); exit 1; }; };;
++ --help | --hel | -h )
++ echo "$ac_cs_usage"; exit 0 ;;
++ --debug | --d* | -d )
++ debug=: ;;
++ --file | --fil | --fi | --f )
++ $ac_shift
++ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
++ ac_need_defaults=false;;
++ --header | --heade | --head | --hea )
++ $ac_shift
++ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
++ ac_need_defaults=false;;
++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
++ | -silent | --silent | --silen | --sile | --sil | --si | --s)
++ ac_cs_silent=: ;;
++
++ # This is an error.
++ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
++Try \`$0 --help' for more information." >&5
++echo "$as_me: error: unrecognized option: $1
++Try \`$0 --help' for more information." >&2;}
++ { (exit 1); exit 1; }; } ;;
++
++ *) ac_config_targets="$ac_config_targets $1" ;;
++
++ esac
++ shift
++done
++
++ac_configure_extra_args=
++
++if $ac_cs_silent; then
++ exec 6>/dev/null
++ ac_configure_extra_args="$ac_configure_extra_args --silent"
++fi
++
++_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF
++if \$ac_cs_recheck; then
++ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
++ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
++fi
++
++_ACEOF
++
++cat >>$CONFIG_STATUS <<_ACEOF
++#
++# INIT-COMMANDS section.
++#
++
++AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
++
++_ACEOF
++
++
++
++cat >>$CONFIG_STATUS <<\_ACEOF
++for ac_config_target in $ac_config_targets
++do
++ case "$ac_config_target" in
++ # Handling of arguments.
++ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
++ "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
++ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
++echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
++ { (exit 1); exit 1; }; };;
++ esac
++done
++
++# If the user did not use the arguments to specify the items to instantiate,
++# then the envvar interface is used. Set only those that are not.
++# We use the long form for the default assignment because of an extremely
++# bizarre bug on SunOS 4.1.3.
++if $ac_need_defaults; then
++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
++ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
++fi
++
++# Have a temporary directory for convenience. Make it in the build tree
++# simply because there is no reason to put it here, and in addition,
++# creating and moving files from /tmp can sometimes cause problems.
++# Create a temporary directory, and hook for its removal unless debugging.
++$debug ||
++{
++ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
++ trap '{ (exit 1); exit 1; }' 1 2 13 15
++}
++
++# Create a (secure) tmp directory for tmp files.
++
++{
++ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
++ test -n "$tmp" && test -d "$tmp"
++} ||
++{
++ tmp=./confstat$$-$RANDOM
++ (umask 077 && mkdir $tmp)
++} ||
++{
++ echo "$me: cannot create a temporary directory in ." >&2
++ { (exit 1); exit 1; }
++}
++
++_ACEOF
++
++cat >>$CONFIG_STATUS <<_ACEOF
++
++#
++# CONFIG_FILES section.
++#
++
++# No need to generate the scripts if there are no CONFIG_FILES.
++# This happens for instance when ./config.status config.h
++if test -n "\$CONFIG_FILES"; then
++ # Protect against being on the right side of a sed subst in config.status.
++ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
++ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
++s,@SHELL@,$SHELL,;t t
++s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
++s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
++s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
++s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
++s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
++s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
++s,@exec_prefix@,$exec_prefix,;t t
++s,@prefix@,$prefix,;t t
++s,@program_transform_name@,$program_transform_name,;t t
++s,@bindir@,$bindir,;t t
++s,@sbindir@,$sbindir,;t t
++s,@libexecdir@,$libexecdir,;t t
++s,@datadir@,$datadir,;t t
++s,@sysconfdir@,$sysconfdir,;t t
++s,@sharedstatedir@,$sharedstatedir,;t t
++s,@localstatedir@,$localstatedir,;t t
++s,@libdir@,$libdir,;t t
++s,@includedir@,$includedir,;t t
++s,@oldincludedir@,$oldincludedir,;t t
++s,@infodir@,$infodir,;t t
++s,@mandir@,$mandir,;t t
++s,@build_alias@,$build_alias,;t t
++s,@host_alias@,$host_alias,;t t
++s,@target_alias@,$target_alias,;t t
++s,@DEFS@,$DEFS,;t t
++s,@ECHO_C@,$ECHO_C,;t t
++s,@ECHO_N@,$ECHO_N,;t t
++s,@ECHO_T@,$ECHO_T,;t t
++s,@LIBS@,$LIBS,;t t
++s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
++s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
++s,@INSTALL_DATA@,$INSTALL_DATA,;t t
++s,@CYGPATH_W@,$CYGPATH_W,;t t
++s,@PACKAGE@,$PACKAGE,;t t
++s,@VERSION@,$VERSION,;t t
++s,@ACLOCAL@,$ACLOCAL,;t t
++s,@AUTOCONF@,$AUTOCONF,;t t
++s,@AUTOMAKE@,$AUTOMAKE,;t t
++s,@AUTOHEADER@,$AUTOHEADER,;t t
++s,@MAKEINFO@,$MAKEINFO,;t t
++s,@AMTAR@,$AMTAR,;t t
++s,@install_sh@,$install_sh,;t t
++s,@STRIP@,$STRIP,;t t
++s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
++s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
++s,@mkdir_p@,$mkdir_p,;t t
++s,@AWK@,$AWK,;t t
++s,@SET_MAKE@,$SET_MAKE,;t t
++s,@am__leading_dot@,$am__leading_dot,;t t
++s,@CC@,$CC,;t t
++s,@CFLAGS@,$CFLAGS,;t t
++s,@LDFLAGS@,$LDFLAGS,;t t
++s,@CPPFLAGS@,$CPPFLAGS,;t t
++s,@ac_ct_CC@,$ac_ct_CC,;t t
++s,@EXEEXT@,$EXEEXT,;t t
++s,@OBJEXT@,$OBJEXT,;t t
++s,@DEPDIR@,$DEPDIR,;t t
++s,@am__include@,$am__include,;t t
++s,@am__quote@,$am__quote,;t t
++s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
++s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
++s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
++s,@CCDEPMODE@,$CCDEPMODE,;t t
++s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
++s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
++s,@LIBOBJS@,$LIBOBJS,;t t
++s,@LTLIBOBJS@,$LTLIBOBJS,;t t
++CEOF
++
++_ACEOF
++
++ cat >>$CONFIG_STATUS <<\_ACEOF
++ # Split the substitutions into bite-sized pieces for seds with
++ # small command number limits, like on Digital OSF/1 and HP-UX.
++ ac_max_sed_lines=48
++ ac_sed_frag=1 # Number of current file.
++ ac_beg=1 # First line for current file.
++ ac_end=$ac_max_sed_lines # Line after last line for current file.
++ ac_more_lines=:
++ ac_sed_cmds=
++ while $ac_more_lines; do
++ if test $ac_beg -gt 1; then
++ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
++ else
++ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
++ fi
++ if test ! -s $tmp/subs.frag; then
++ ac_more_lines=false
++ else
++ # The purpose of the label and of the branching condition is to
++ # speed up the sed processing (if there are no `@' at all, there
++ # is no need to browse any of the substitutions).
++ # These are the two extra sed commands mentioned above.
++ (echo ':t
++ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
++ if test -z "$ac_sed_cmds"; then
++ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
++ else
++ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
++ fi
++ ac_sed_frag=`expr $ac_sed_frag + 1`
++ ac_beg=$ac_end
++ ac_end=`expr $ac_end + $ac_max_sed_lines`
++ fi
++ done
++ if test -z "$ac_sed_cmds"; then
++ ac_sed_cmds=cat
++ fi
++fi # test -n "$CONFIG_FILES"
++
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF
++for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
++ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
++ case $ac_file in
++ - | *:- | *:-:* ) # input from stdin
++ cat >$tmp/stdin
++ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
++ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
++ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
++ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
++ * ) ac_file_in=$ac_file.in ;;
++ esac
++
++ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
++ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$ac_file" : 'X\(//\)[^/]' \| \
++ X"$ac_file" : 'X\(//\)$' \| \
++ X"$ac_file" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$ac_file" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++ { if $as_mkdir_p; then
++ mkdir -p "$ac_dir"
++ else
++ as_dir="$ac_dir"
++ as_dirs=
++ while test ! -d "$as_dir"; do
++ as_dirs="$as_dir $as_dirs"
++ as_dir=`(dirname "$as_dir") 2>/dev/null ||
++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_dir" : 'X\(//\)[^/]' \| \
++ X"$as_dir" : 'X\(//\)$' \| \
++ X"$as_dir" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$as_dir" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++ done
++ test ! -n "$as_dirs" || mkdir $as_dirs
++ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
++echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
++ { (exit 1); exit 1; }; }; }
++
++ ac_builddir=.
++
++if test "$ac_dir" != .; then
++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
++ # A "../" for each directory in $ac_dir_suffix.
++ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
++else
++ ac_dir_suffix= ac_top_builddir=
++fi
++
++case $srcdir in
++ .) # No --srcdir option. We are building in place.
++ ac_srcdir=.
++ if test -z "$ac_top_builddir"; then
++ ac_top_srcdir=.
++ else
++ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
++ fi ;;
++ [\\/]* | ?:[\\/]* ) # Absolute path.
++ ac_srcdir=$srcdir$ac_dir_suffix;
++ ac_top_srcdir=$srcdir ;;
++ *) # Relative path.
++ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
++ ac_top_srcdir=$ac_top_builddir$srcdir ;;
++esac
++
++# Do not use `cd foo && pwd` to compute absolute paths, because
++# the directories may not exist.
++case `pwd` in
++.) ac_abs_builddir="$ac_dir";;
++*)
++ case "$ac_dir" in
++ .) ac_abs_builddir=`pwd`;;
++ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
++ *) ac_abs_builddir=`pwd`/"$ac_dir";;
++ esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_top_builddir=${ac_top_builddir}.;;
++*)
++ case ${ac_top_builddir}. in
++ .) ac_abs_top_builddir=$ac_abs_builddir;;
++ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
++ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
++ esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_srcdir=$ac_srcdir;;
++*)
++ case $ac_srcdir in
++ .) ac_abs_srcdir=$ac_abs_builddir;;
++ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
++ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
++ esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_top_srcdir=$ac_top_srcdir;;
++*)
++ case $ac_top_srcdir in
++ .) ac_abs_top_srcdir=$ac_abs_builddir;;
++ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
++ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
++ esac;;
++esac
+
-+# test genext2fs by actually mounting the created image.
-+test-mount: all
-+ sudo sh ./test-mount.sh
-diff -urN genext2fs-1.3.orig/debian/changelog genext2fs-1.3/debian/changelog
---- genext2fs-1.3.orig/debian/changelog 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/debian/changelog 2003-04-21 01:41:42.000000000 -0600
-@@ -0,0 +1,17 @@
-+genext2fs (1.3-2) unstable; urgency=low
+
-+ * apply fix from upstream cvs that appears to fix endian bug
-+ (closes: #122411)
-+ * mention filesystem size limit in manpage (closes: #122729)
-+ * mention that hard links are not supported in manpage
-+ (closes: #155464)
-+ * add sanity check at the end of the build
++ case $INSTALL in
++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
++ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
++ esac
+
-+ -- David Kimdon <dwhedon@debian.org> Fri, 8 Mar 2002 23:17:36 -0800
++ # Let's still pretend it is `configure' which instantiates (i.e., don't
++ # use $as_me), people would be surprised to read:
++ # /* config.h. Generated by config.status. */
++ if test x"$ac_file" = x-; then
++ configure_input=
++ else
++ configure_input="$ac_file. "
++ fi
++ configure_input=$configure_input"Generated from `echo $ac_file_in |
++ sed 's,.*/,,'` by configure."
+
++ # First look for the input files in the build tree, otherwise in the
++ # src tree.
++ ac_file_inputs=`IFS=:
++ for f in $ac_file_in; do
++ case $f in
++ -) echo $tmp/stdin ;;
++ [\\/$]*)
++ # Absolute (can't be DOS-style, as IFS=:)
++ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
++echo "$as_me: error: cannot find input file: $f" >&2;}
++ { (exit 1); exit 1; }; }
++ echo "$f";;
++ *) # Relative
++ if test -f "$f"; then
++ # Build tree
++ echo "$f"
++ elif test -f "$srcdir/$f"; then
++ # Source tree
++ echo "$srcdir/$f"
++ else
++ # /dev/null tree
++ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
++echo "$as_me: error: cannot find input file: $f" >&2;}
++ { (exit 1); exit 1; }; }
++ fi;;
++ esac
++ done` || { (exit 1); exit 1; }
++
++ if test x"$ac_file" != x-; then
++ { echo "$as_me:$LINENO: creating $ac_file" >&5
++echo "$as_me: creating $ac_file" >&6;}
++ rm -f "$ac_file"
++ fi
++_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF
++ sed "$ac_vpsub
++$extrasub
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF
++:t
++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
++s,@configure_input@,$configure_input,;t t
++s,@srcdir@,$ac_srcdir,;t t
++s,@abs_srcdir@,$ac_abs_srcdir,;t t
++s,@top_srcdir@,$ac_top_srcdir,;t t
++s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
++s,@builddir@,$ac_builddir,;t t
++s,@abs_builddir@,$ac_abs_builddir,;t t
++s,@top_builddir@,$ac_top_builddir,;t t
++s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
++s,@INSTALL@,$ac_INSTALL,;t t
++" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
++ rm -f $tmp/stdin
++ if test x"$ac_file" != x-; then
++ mv $tmp/out $ac_file
++ else
++ cat $tmp/out
++ rm -f $tmp/out
++ fi
++
++done
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF
++
++#
++# CONFIG_COMMANDS section.
++#
++for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
++ ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
++ ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
++ ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
++$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$ac_dest" : 'X\(//\)[^/]' \| \
++ X"$ac_dest" : 'X\(//\)$' \| \
++ X"$ac_dest" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$ac_dest" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++ { if $as_mkdir_p; then
++ mkdir -p "$ac_dir"
++ else
++ as_dir="$ac_dir"
++ as_dirs=
++ while test ! -d "$as_dir"; do
++ as_dirs="$as_dir $as_dirs"
++ as_dir=`(dirname "$as_dir") 2>/dev/null ||
++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_dir" : 'X\(//\)[^/]' \| \
++ X"$as_dir" : 'X\(//\)$' \| \
++ X"$as_dir" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$as_dir" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++ done
++ test ! -n "$as_dirs" || mkdir $as_dirs
++ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
++echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
++ { (exit 1); exit 1; }; }; }
++
++ ac_builddir=.
++
++if test "$ac_dir" != .; then
++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
++ # A "../" for each directory in $ac_dir_suffix.
++ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
++else
++ ac_dir_suffix= ac_top_builddir=
++fi
++
++case $srcdir in
++ .) # No --srcdir option. We are building in place.
++ ac_srcdir=.
++ if test -z "$ac_top_builddir"; then
++ ac_top_srcdir=.
++ else
++ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
++ fi ;;
++ [\\/]* | ?:[\\/]* ) # Absolute path.
++ ac_srcdir=$srcdir$ac_dir_suffix;
++ ac_top_srcdir=$srcdir ;;
++ *) # Relative path.
++ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
++ ac_top_srcdir=$ac_top_builddir$srcdir ;;
++esac
++
++# Do not use `cd foo && pwd` to compute absolute paths, because
++# the directories may not exist.
++case `pwd` in
++.) ac_abs_builddir="$ac_dir";;
++*)
++ case "$ac_dir" in
++ .) ac_abs_builddir=`pwd`;;
++ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
++ *) ac_abs_builddir=`pwd`/"$ac_dir";;
++ esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_top_builddir=${ac_top_builddir}.;;
++*)
++ case ${ac_top_builddir}. in
++ .) ac_abs_top_builddir=$ac_abs_builddir;;
++ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
++ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
++ esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_srcdir=$ac_srcdir;;
++*)
++ case $ac_srcdir in
++ .) ac_abs_srcdir=$ac_abs_builddir;;
++ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
++ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
++ esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_top_srcdir=$ac_top_srcdir;;
++*)
++ case $ac_top_srcdir in
++ .) ac_abs_top_srcdir=$ac_abs_builddir;;
++ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
++ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
++ esac;;
++esac
++
++
++ { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
++echo "$as_me: executing $ac_dest commands" >&6;}
++ case $ac_dest in
++ depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
++ # Strip MF so we end up with the name of the file.
++ mf=`echo "$mf" | sed -e 's/:.*$//'`
++ # Check whether this is an Automake generated Makefile or not.
++ # We used to match only the files named `Makefile.in', but
++ # some people rename them; so instead we look at the file content.
++ # Grep'ing the first line is not enough: some people post-process
++ # each Makefile.in and add a new line on top of each file to say so.
++ # So let's grep whole file.
++ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
++ dirpart=`(dirname "$mf") 2>/dev/null ||
++$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$mf" : 'X\(//\)[^/]' \| \
++ X"$mf" : 'X\(//\)$' \| \
++ X"$mf" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$mf" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++ else
++ continue
++ fi
++ grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
++ # Extract the definition of DEP_FILES from the Makefile without
++ # running `make'.
++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
++ test -z "$DEPDIR" && continue
++ # When using ansi2knr, U may be empty or an underscore; expand it
++ U=`sed -n 's/^U = //p' < "$mf"`
++ test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
++ # We invoke sed twice because it is the simplest approach to
++ # changing $(DEPDIR) to its actual value in the expansion.
++ for file in `sed -n '
++ /^DEP_FILES = .*\\\\$/ {
++ s/^DEP_FILES = //
++ :loop
++ s/\\\\$//
++ p
++ n
++ /\\\\$/ b loop
++ p
++ }
++ /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
++ # Make sure the directory exists.
++ test -f "$dirpart/$file" && continue
++ fdir=`(dirname "$file") 2>/dev/null ||
++$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$file" : 'X\(//\)[^/]' \| \
++ X"$file" : 'X\(//\)$' \| \
++ X"$file" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$file" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++ { if $as_mkdir_p; then
++ mkdir -p $dirpart/$fdir
++ else
++ as_dir=$dirpart/$fdir
++ as_dirs=
++ while test ! -d "$as_dir"; do
++ as_dirs="$as_dir $as_dirs"
++ as_dir=`(dirname "$as_dir") 2>/dev/null ||
++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_dir" : 'X\(//\)[^/]' \| \
++ X"$as_dir" : 'X\(//\)$' \| \
++ X"$as_dir" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$as_dir" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++ done
++ test ! -n "$as_dirs" || mkdir $as_dirs
++ fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
++echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
++ { (exit 1); exit 1; }; }; }
++
++ # echo "creating $dirpart/$file"
++ echo '# dummy' > "$dirpart/$file"
++ done
++done
++ ;;
++ esac
++done
++_ACEOF
++
++cat >>$CONFIG_STATUS <<\_ACEOF
++
++{ (exit 0); exit 0; }
++_ACEOF
++chmod +x $CONFIG_STATUS
++ac_clean_files=$ac_clean_files_save
++
++
++# configure is writing to config.log, and then calls config.status.
++# config.status does its own redirection, appending to config.log.
++# Unfortunately, on DOS this fails, as config.log is still kept open
++# by configure, so config.status won't be able to write to it; its
++# output is simply discarded. So we exec the FD to /dev/null,
++# effectively closing config.log, so it can be properly (re)opened and
++# appended to by config.status. When coming back to configure, we
++# need to make the FD available again.
++if test "$no_create" != yes; then
++ ac_cs_success=:
++ ac_config_status_args=
++ test "$silent" = yes &&
++ ac_config_status_args="$ac_config_status_args --quiet"
++ exec 5>/dev/null
++ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
++ exec 5>>config.log
++ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
++ # would make configure fail if this is the last instruction.
++ $ac_cs_success || { (exit 1); exit 1; }
++fi
++
+diff --exclude CVS -urN genext2fs-1.3.orig/configure.in genext2fs/configure.in
+--- genext2fs-1.3.orig/configure.in 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/configure.in 2001-05-02 12:20:05.000000000 -0600
+@@ -0,0 +1,5 @@
++AC_INIT(genext2fs.c)
++AM_INIT_AUTOMAKE(genext2fs,1.3)
++AC_PROG_CC
++AC_PROG_INSTALL
++AC_OUTPUT(Makefile)
+diff --exclude CVS -urN genext2fs-1.3.orig/debian/changelog genext2fs/debian/changelog
+--- genext2fs-1.3.orig/debian/changelog 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/debian/changelog 2001-07-26 22:41:25.000000000 -0600
+@@ -0,0 +1,9 @@
+genext2fs (1.3-1) unstable; urgency=low
+
+ * Initial Release. (closes: #105263)
+
+ -- David Kimdon <dwhedon@debian.org> Sat, 14 Jul 2001 13:24:49 -0700
+
-diff -urN genext2fs-1.3.orig/debian/control genext2fs-1.3/debian/control
++Local variables:
++mode: debian-changelog
++End:
+diff --exclude CVS -urN genext2fs-1.3.orig/debian/control genext2fs/debian/control
--- genext2fs-1.3.orig/debian/control 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/debian/control 2003-04-21 01:41:42.000000000 -0600
++++ genext2fs/debian/control 2001-07-16 18:01:00.000000000 -0600
@@ -0,0 +1,19 @@
+Source: genext2fs
+Section: admin
+ Warning ! `genext2fs' has been designed for embedded
+ systems. As such, it will generate a filesystem for single-user
+ usage: all files/directories/etc... will belong to UID/GID 0
-diff -urN genext2fs-1.3.orig/debian/copyright genext2fs-1.3/debian/copyright
+diff --exclude CVS -urN genext2fs-1.3.orig/debian/copyright genext2fs/debian/copyright
--- genext2fs-1.3.orig/debian/copyright 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/debian/copyright 2003-04-21 01:41:42.000000000 -0600
++++ genext2fs/debian/copyright 2001-07-16 18:01:00.000000000 -0600
@@ -0,0 +1,15 @@
+This package was debianized by David Kimdon <dwhedon@debian.org> on
+Sat, 14 Jul 2001 13:24:49 -0700.
+
+On Debian systems, the complete text of the GNU General Public
+License can be found in /usr/share/common-licenses/GPL file.
-diff -urN genext2fs-1.3.orig/debian/rules genext2fs-1.3/debian/rules
+diff --exclude CVS -urN genext2fs-1.3.orig/debian/rules genext2fs/debian/rules
--- genext2fs-1.3.orig/debian/rules 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/debian/rules 2003-04-21 01:41:42.000000000 -0600
-@@ -0,0 +1,70 @@
++++ genext2fs/debian/rules 2001-07-27 09:08:16.000000000 -0600
+@@ -0,0 +1,69 @@
+#!/usr/bin/make -f
+# Sample debian/rules that uses debhelper.
+# GNU copyright 1997 to 1999 by Joey Hess.
+
+ # Add here commands to compile the package.
+ $(MAKE)
-+ $(MAKE) check
+
+ touch build-stamp
+
+
+ dh_clean
+
-+install: build
-+ dh_testdir
-+ dh_testroot
-+ dh_clean -k
-+ dh_installdirs
++install: build
++ dh_testdir
++ dh_testroot
++ dh_clean -k
++ dh_installdirs
++
++ # Add here commands to install the package into debian/genext2fs.
++ $(MAKE) install DESTDIR=`pwd`/debian/genext2fs
++
++
++# Build architecture-independent files here.
++binary-indep: build install
++# We have nothing to do by default.
++
++# Build architecture-dependent files here.
++binary-arch: build install
++ dh_testdir
++ dh_testroot
++ dh_installdocs
++ dh_installchangelogs
++ dh_link
++ dh_strip
++ dh_compress
++ dh_fixperms
++ dh_installdeb
++ dh_shlibdeps
++ dh_gencontrol
++ dh_md5sums
++ dh_builddeb
++
++binary: binary-indep binary-arch
++.PHONY: build clean binary-indep binary-arch binary install configure
+diff --exclude CVS -urN genext2fs-1.3.orig/depcomp genext2fs/depcomp
+--- genext2fs-1.3.orig/depcomp 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/depcomp 2004-12-27 13:03:47.000000000 -0700
+@@ -0,0 +1,526 @@
++#! /bin/sh
++# depcomp - compile a program generating dependencies as side-effects
++
++scriptversion=2004-04-25.13
++
++# Copyright (C) 1999, 2000, 2003, 2004 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
++
++case $1 in
++ '')
++ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
++ exit 1;
++ ;;
++ -h | --h*)
++ cat <<\EOF
++Usage: depcomp [--help] [--version] PROGRAM [ARGS]
++
++Run PROGRAMS ARGS to compile a file, generating dependencies
++as side-effects.
++
++Environment variables:
++ depmode Dependency tracking mode.
++ source Source file read by `PROGRAMS ARGS'.
++ object Object file output by `PROGRAMS ARGS'.
++ depfile Dependency file to output.
++ tmpdepfile Temporary file to use when outputing dependencies.
++ libtool Whether libtool is used (yes/no).
++
++Report bugs to <bug-automake@gnu.org>.
++EOF
++ exit 0
++ ;;
++ -v | --v*)
++ echo "depcomp $scriptversion"
++ exit 0
++ ;;
++esac
++
++if test -z "$depmode" || test -z "$source" || test -z "$object"; then
++ echo "depcomp: Variables source, object and depmode must be set" 1>&2
++ exit 1
++fi
++# `libtool' can also be set to `yes' or `no'.
++
++if test -z "$depfile"; then
++ base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
++ dir=`echo "$object" | sed 's,/.*$,/,'`
++ if test "$dir" = "$object"; then
++ dir=
++ fi
++ # FIXME: should be _deps on DOS.
++ depfile="$dir.deps/$base"
++fi
++
++tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
++
++rm -f "$tmpdepfile"
++
++# Some modes work just like other modes, but use different flags. We
++# parameterize here, but still list the modes in the big case below,
++# to make depend.m4 easier to write. Note that we *cannot* use a case
++# here, because this file can only contain one case statement.
++if test "$depmode" = hp; then
++ # HP compiler uses -M and no extra arg.
++ gccflag=-M
++ depmode=gcc
++fi
++
++if test "$depmode" = dashXmstdout; then
++ # This is just like dashmstdout with a different argument.
++ dashmflag=-xM
++ depmode=dashmstdout
++fi
++
++case "$depmode" in
++gcc3)
++## gcc 3 implements dependency tracking that does exactly what
++## we want. Yay! Note: for some reason libtool 1.4 doesn't like
++## it if -MD -MP comes after the -MF stuff. Hmm.
++ "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
++ stat=$?
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ mv "$tmpdepfile" "$depfile"
++ ;;
++
++gcc)
++## There are various ways to get dependency output from gcc. Here's
++## why we pick this rather obscure method:
++## - Don't want to use -MD because we'd like the dependencies to end
++## up in a subdir. Having to rename by hand is ugly.
++## (We might end up doing this anyway to support other compilers.)
++## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
++## -MM, not -M (despite what the docs say).
++## - Using -M directly means running the compiler twice (even worse
++## than renaming).
++ if test -z "$gccflag"; then
++ gccflag=-MD,
++ fi
++ "$@" -Wp,"$gccflag$tmpdepfile"
++ stat=$?
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ rm -f "$depfile"
++ echo "$object : \\" > "$depfile"
++ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
++## The second -e expression handles DOS-style file names with drive letters.
++ sed -e 's/^[^:]*: / /' \
++ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
++## This next piece of magic avoids the `deleted header file' problem.
++## The problem is that when a header file which appears in a .P file
++## is deleted, the dependency causes make to die (because there is
++## typically no way to rebuild the header). We avoid this by adding
++## dummy dependencies for each header file. Too bad gcc doesn't do
++## this for us directly.
++ tr ' ' '
++' < "$tmpdepfile" |
++## Some versions of gcc put a space before the `:'. On the theory
++## that the space means something, we add a space to the output as
++## well.
++## Some versions of the HPUX 10.20 sed can't process this invocation
++## correctly. Breaking it into two sed invocations is a workaround.
++ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++hp)
++ # This case exists only to let depend.m4 do its work. It works by
++ # looking at the text of this script. This case will never be run,
++ # since it is checked for above.
++ exit 1
++ ;;
++
++sgi)
++ if test "$libtool" = yes; then
++ "$@" "-Wp,-MDupdate,$tmpdepfile"
++ else
++ "$@" -MDupdate "$tmpdepfile"
++ fi
++ stat=$?
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ rm -f "$depfile"
++
++ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
++ echo "$object : \\" > "$depfile"
++
++ # Clip off the initial element (the dependent). Don't try to be
++ # clever and replace this with sed code, as IRIX sed won't handle
++ # lines with more than a fixed number of characters (4096 in
++ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
++ # the IRIX cc adds comments like `#:fec' to the end of the
++ # dependency line.
++ tr ' ' '
++' < "$tmpdepfile" \
++ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
++ tr '
++' ' ' >> $depfile
++ echo >> $depfile
++
++ # The second pass generates a dummy entry for each header file.
++ tr ' ' '
++' < "$tmpdepfile" \
++ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
++ >> $depfile
++ else
++ # The sourcefile does not contain any dependencies, so just
++ # store a dummy comment line, to avoid errors with the Makefile
++ # "include basename.Plo" scheme.
++ echo "#dummy" > "$depfile"
++ fi
++ rm -f "$tmpdepfile"
++ ;;
++
++aix)
++ # The C for AIX Compiler uses -M and outputs the dependencies
++ # in a .u file. In older versions, this file always lives in the
++ # current directory. Also, the AIX compiler puts `$object:' at the
++ # start of each line; $object doesn't have directory information.
++ # Version 6 uses the directory in both cases.
++ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
++ tmpdepfile="$stripped.u"
++ if test "$libtool" = yes; then
++ "$@" -Wc,-M
++ else
++ "$@" -M
++ fi
++ stat=$?
++
++ if test -f "$tmpdepfile"; then :
++ else
++ stripped=`echo "$stripped" | sed 's,^.*/,,'`
++ tmpdepfile="$stripped.u"
++ fi
++
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++
++ if test -f "$tmpdepfile"; then
++ outname="$stripped.o"
++ # Each line is of the form `foo.o: dependent.h'.
++ # Do two passes, one to just change these to
++ # `$object: dependent.h' and one to simply `dependent.h:'.
++ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
++ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
++ else
++ # The sourcefile does not contain any dependencies, so just
++ # store a dummy comment line, to avoid errors with the Makefile
++ # "include basename.Plo" scheme.
++ echo "#dummy" > "$depfile"
++ fi
++ rm -f "$tmpdepfile"
++ ;;
++
++icc)
++ # Intel's C compiler understands `-MD -MF file'. However on
++ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
++ # ICC 7.0 will fill foo.d with something like
++ # foo.o: sub/foo.c
++ # foo.o: sub/foo.h
++ # which is wrong. We want:
++ # sub/foo.o: sub/foo.c
++ # sub/foo.o: sub/foo.h
++ # sub/foo.c:
++ # sub/foo.h:
++ # ICC 7.1 will output
++ # foo.o: sub/foo.c sub/foo.h
++ # and will wrap long lines using \ :
++ # foo.o: sub/foo.c ... \
++ # sub/foo.h ... \
++ # ...
++
++ "$@" -MD -MF "$tmpdepfile"
++ stat=$?
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile"
++ exit $stat
++ fi
++ rm -f "$depfile"
++ # Each line is of the form `foo.o: dependent.h',
++ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
++ # Do two passes, one to just change these to
++ # `$object: dependent.h' and one to simply `dependent.h:'.
++ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
++ # Some versions of the HPUX 10.20 sed can't process this invocation
++ # correctly. Breaking it into two sed invocations is a workaround.
++ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
++ sed -e 's/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++tru64)
++ # The Tru64 compiler uses -MD to generate dependencies as a side
++ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
++ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
++ # dependencies in `foo.d' instead, so we check for that too.
++ # Subdirectories are respected.
++ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
++ test "x$dir" = "x$object" && dir=
++ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
++
++ if test "$libtool" = yes; then
++ # Dependencies are output in .lo.d with libtool 1.4.
++ # They are output in .o.d with libtool 1.5.
++ tmpdepfile1="$dir.libs/$base.lo.d"
++ tmpdepfile2="$dir.libs/$base.o.d"
++ tmpdepfile3="$dir.libs/$base.d"
++ "$@" -Wc,-MD
++ else
++ tmpdepfile1="$dir$base.o.d"
++ tmpdepfile2="$dir$base.d"
++ tmpdepfile3="$dir$base.d"
++ "$@" -MD
++ fi
++
++ stat=$?
++ if test $stat -eq 0; then :
++ else
++ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
++ exit $stat
++ fi
++
++ if test -f "$tmpdepfile1"; then
++ tmpdepfile="$tmpdepfile1"
++ elif test -f "$tmpdepfile2"; then
++ tmpdepfile="$tmpdepfile2"
++ else
++ tmpdepfile="$tmpdepfile3"
++ fi
++ if test -f "$tmpdepfile"; then
++ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
++ # That's a tab and a space in the [].
++ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
++ else
++ echo "#dummy" > "$depfile"
++ fi
++ rm -f "$tmpdepfile"
++ ;;
++
++#nosideeffect)
++ # This comment above is used by automake to tell side-effect
++ # dependency tracking mechanisms from slower ones.
++
++dashmstdout)
++ # Important note: in order to support this mode, a compiler *must*
++ # always write the preprocessed file to stdout, regardless of -o.
++ "$@" || exit $?
++
++ # Remove the call to Libtool.
++ if test "$libtool" = yes; then
++ while test $1 != '--mode=compile'; do
++ shift
++ done
++ shift
++ fi
++
++ # Remove `-o $object'.
++ IFS=" "
++ for arg
++ do
++ case $arg in
++ -o)
++ shift
++ ;;
++ $object)
++ shift
++ ;;
++ *)
++ set fnord "$@" "$arg"
++ shift # fnord
++ shift # $arg
++ ;;
++ esac
++ done
++
++ test -z "$dashmflag" && dashmflag=-M
++ # Require at least two characters before searching for `:'
++ # in the target name. This is to cope with DOS-style filenames:
++ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
++ "$@" $dashmflag |
++ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
++ rm -f "$depfile"
++ cat < "$tmpdepfile" > "$depfile"
++ tr ' ' '
++' < "$tmpdepfile" | \
++## Some versions of the HPUX 10.20 sed can't process this invocation
++## correctly. Breaking it into two sed invocations is a workaround.
++ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
++
++dashXmstdout)
++ # This case only exists to satisfy depend.m4. It is never actually
++ # run, as this mode is specially recognized in the preamble.
++ exit 1
++ ;;
++
++makedepend)
++ "$@" || exit $?
++ # Remove any Libtool call
++ if test "$libtool" = yes; then
++ while test $1 != '--mode=compile'; do
++ shift
++ done
++ shift
++ fi
++ # X makedepend
++ shift
++ cleared=no
++ for arg in "$@"; do
++ case $cleared in
++ no)
++ set ""; shift
++ cleared=yes ;;
++ esac
++ case "$arg" in
++ -D*|-I*)
++ set fnord "$@" "$arg"; shift ;;
++ # Strip any option that makedepend may not understand. Remove
++ # the object too, otherwise makedepend will parse it as a source file.
++ -*|$object)
++ ;;
++ *)
++ set fnord "$@" "$arg"; shift ;;
++ esac
++ done
++ obj_suffix="`echo $object | sed 's/^.*\././'`"
++ touch "$tmpdepfile"
++ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
++ rm -f "$depfile"
++ cat < "$tmpdepfile" > "$depfile"
++ sed '1,2d' "$tmpdepfile" | tr ' ' '
++' | \
++## Some versions of the HPUX 10.20 sed can't process this invocation
++## correctly. Breaking it into two sed invocations is a workaround.
++ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile" "$tmpdepfile".bak
++ ;;
++
++cpp)
++ # Important note: in order to support this mode, a compiler *must*
++ # always write the preprocessed file to stdout.
++ "$@" || exit $?
++
++ # Remove the call to Libtool.
++ if test "$libtool" = yes; then
++ while test $1 != '--mode=compile'; do
++ shift
++ done
++ shift
++ fi
++
++ # Remove `-o $object'.
++ IFS=" "
++ for arg
++ do
++ case $arg in
++ -o)
++ shift
++ ;;
++ $object)
++ shift
++ ;;
++ *)
++ set fnord "$@" "$arg"
++ shift # fnord
++ shift # $arg
++ ;;
++ esac
++ done
++
++ "$@" -E |
++ sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
++ sed '$ s: \\$::' > "$tmpdepfile"
++ rm -f "$depfile"
++ echo "$object : \\" > "$depfile"
++ cat < "$tmpdepfile" >> "$depfile"
++ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
+
-+ # Add here commands to install the package into debian/genext2fs.
-+ $(MAKE) install DESTDIR=`pwd`/debian/genext2fs
++msvisualcpp)
++ # Important note: in order to support this mode, a compiler *must*
++ # always write the preprocessed file to stdout, regardless of -o,
++ # because we must use -o when running libtool.
++ "$@" || exit $?
++ IFS=" "
++ for arg
++ do
++ case "$arg" in
++ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
++ set fnord "$@"
++ shift
++ shift
++ ;;
++ *)
++ set fnord "$@" "$arg"
++ shift
++ shift
++ ;;
++ esac
++ done
++ "$@" -E |
++ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
++ rm -f "$depfile"
++ echo "$object : \\" > "$depfile"
++ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
++ echo " " >> "$depfile"
++ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
++ rm -f "$tmpdepfile"
++ ;;
+
++none)
++ exec "$@"
++ ;;
+
-+# Build architecture-independent files here.
-+binary-indep: build install
-+# We have nothing to do by default.
++*)
++ echo "Unknown depmode $depmode" 1>&2
++ exit 1
++ ;;
++esac
+
-+# Build architecture-dependent files here.
-+binary-arch: build install
-+ dh_testdir
-+ dh_testroot
-+ dh_installdocs
-+ dh_installchangelogs
-+ dh_link
-+ dh_strip
-+ dh_compress
-+ dh_fixperms
-+ dh_installdeb
-+ dh_shlibdeps
-+ dh_gencontrol
-+ dh_md5sums
-+ dh_builddeb
++exit 0
+
-+binary: binary-indep binary-arch
-+.PHONY: build clean binary-indep binary-arch binary install configure
-diff -urN genext2fs-1.3.orig/dev.txt genext2fs-1.3/dev.txt
++# Local Variables:
++# mode: shell-script
++# sh-indentation: 2
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-end: "$"
++# End:
+diff --exclude CVS -urN genext2fs-1.3.orig/dev.txt genext2fs/dev.txt
--- genext2fs-1.3.orig/dev.txt 2000-09-28 09:03:19.000000000 -0600
-+++ genext2fs-1.3/dev.txt 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/dev.txt 1969-12-31 17:00:00.000000000 -0700
@@ -1,94 +0,0 @@
-drwx /dev
-crw- 10,190 /dev/lcd
-crw- 5,67 /dev/cua3
-crw- 5,68 /dev/cua4
-crw- 5,69 /dev/cua5
-diff -urN genext2fs-1.3.orig/device_table.txt genext2fs-1.3/device_table.txt
+diff --exclude CVS -urN genext2fs-1.3.orig/device_table.txt genext2fs/device_table.txt
--- genext2fs-1.3.orig/device_table.txt 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/device_table.txt 2003-04-21 01:41:42.000000000 -0600
++++ genext2fs/device_table.txt 2004-10-24 02:43:50.000000000 -0600
@@ -0,0 +1,129 @@
+# When building a target filesystem, it is desirable to not have to
+# become root and then run 'mknod' a thousand times. Using a device
+#/dev/mcd b 640 0 0 23 0 0 0 -
+#/dev/optcd b 640 0 0 17 0 0 0 -
+
-diff -urN genext2fs-1.3.orig/genext2fs.8 genext2fs-1.3/genext2fs.8
+diff --exclude CVS -urN genext2fs-1.3.orig/genext2fs.8 genext2fs/genext2fs.8
--- genext2fs-1.3.orig/genext2fs.8 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/genext2fs.8 2003-04-21 01:41:42.000000000 -0600
-@@ -0,0 +1,125 @@
++++ genext2fs/genext2fs.8 2004-10-24 02:43:50.000000000 -0600
+@@ -0,0 +1,129 @@
+.\" Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+as a normal (non-root) user. It doesn't require you to mount
+the image file to copy files on it. It doesn't even require
+you to be the superuser to make device nodes.
++.SH WARNING
++\fBgenext2fs\fP has been designed for embedded
++systems. As such, it will generate a filesystem for single-user
++usage: all files/directories/etc... will belong to UID/GID 0
+.SH OPTIONS
+.TP
+.BI -x \ image
+.SH AUTHOR
+This manual page was written by David Kimdon <dwhedon@debian.org>,
+for the Debian GNU/Linux system (but may be used by others).
-diff -urN genext2fs-1.3.orig/genext2fs.c genext2fs-1.3/genext2fs.c
+diff --exclude CVS -urN genext2fs-1.3.orig/genext2fs.c genext2fs/genext2fs.c
--- genext2fs-1.3.orig/genext2fs.c 2001-06-18 02:11:32.000000000 -0600
-+++ genext2fs-1.3/genext2fs.c 2003-04-21 01:48:35.000000000 -0600
-@@ -1,3 +1,4 @@
++++ genext2fs/genext2fs.c 2004-12-08 04:51:42.000000000 -0700
+@@ -1,8 +1,14 @@
+/* vi: set sw=8 ts=8: */
// genext2fs.c
//
// ext2 filesystem generator for embedded systems
-@@ -26,6 +27,22 @@
+ // Copyright (C) 2000 Xavier Bestel <xavier.bestel@free.fr>
+ //
++// 'du' portions taken from coreutils/du.c in busybox:
++// Copyright (C) 1999,2000 by Lineo, inc. and John Beppu
++// Copyright (C) 1999,2000,2001 by John Beppu <beppu@codepoet.org>
++// Copyright (C) 2002 Edward Betts <edward@debian.org>
++//
+ // This program is free software; you can redistribute it and/or
+ // modify it under the terms of the GNU General Public License
+ // as published by the Free Software Foundation; version
+@@ -26,6 +32,23 @@
// Bugfix: getcwd values for Solaris xavier.gueguen@col.bsf.alcatel.fr
// Bugfix: ANSI scanf for non-GNU C xavier.gueguen@col.bsf.alcatel.fr
// 28 Jun 2001 Bugfix: getcwd differs for Solaris/GNU mike@sowbug.com
++// 8 Mar 2002 Bugfix: endianness swap of x-indirects
+// 23 Mar 2002 Bugfix: test for IFCHR or IFBLK was flawed
+// 10 Oct 2002 Added comments,makefile targets, vsundar@ixiacom.com
+// endianess swap assert check.
+// Copyright (C) 2002 Ixia communications
+// 14 Oct 2002 Added support for groups vsundar@ixiacom.com
+// Copyright (C) 2002 Ixia communications
-+// 5 Jan 2003 Bugfixes: reserved inodes should be set vsundar@usc.edu
-+// only in the first group; directory names
-+// need to be null padded at the end; and
-+// number of blocks per group should be a
-+// multiple of 8. Updated md5 values.
-+//
6 Jan 2003 Erik Andersen <andersee@debian.org> added
-+// mkfs.jffs2 compatible device table support,
-+// along with -q, -P, -U
++// 5 Jan 2003 Bugfixes: reserved inodes should be set vsundar@usc.edu
++// only in the first group; directory names
++// need to be null padded at the end; and
++// number of blocks per group should be a
++// multiple of 8. Updated md5 values.
++//
6 Jan 2003 Erik Andersen <andersee@debian.org> added
++// mkfs.jffs2 compatible device table support,
++// along with -q, -P, -U
// `genext2fs' is a mean to generate an ext2 filesystem
-@@ -33,10 +50,6 @@
+@@ -33,10 +56,6 @@
// the image file to copy files on it. It doesn't even require
// you to be the superuser to make device nodes.
//
// Example usage:
//
// # genext2fs -b 1440 -d srcdir /dev/fd0
-@@ -45,21 +58,15 @@
+@@ -45,41 +64,131 @@
// a new ext2 filesystem image. You can then mount the floppy as
// usual.
//
-// This device list builds the /dev directory, a character device
-// node /dev/lcd (major 10, minor 190) and a block device node
-// /dev/ram0 (major 1, minor 0)
+-
+// then would read the device_table.txt file and make apropriate nodes.
+// The format for the device table file is covered in detail in the sample
+// device_table.txt file provided with the genext2fs source.
-
+#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
-@@ -67,6 +74,11 @@
+ #include <dirent.h>
++#include <libgen.h>
#include <stdarg.h>
#include <unistd.h>
#include <sys/stat.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
++#include <sys/types.h>
++#include <getopt.h>
++
++struct stats {
++ unsigned long nblocks;
++ unsigned long ninodes;
++};
++
++#if 0
++#define HASH_SIZE 311 /* Should be prime */
++#define hash_inode(i) ((i) % HASH_SIZE)
++
++typedef struct ino_dev_hash_bucket_struct {
++ struct ino_dev_hash_bucket_struct *next;
++ ino_t ino;
++ dev_t dev;
++ char name[1];
++} ino_dev_hashtable_bucket_t;
++
++static ino_dev_hashtable_bucket_t *ino_dev_hashtable[HASH_SIZE];
++
++static int is_in_ino_dev_hashtable(const struct stat *statbuf, char **name)
++{
++ ino_dev_hashtable_bucket_t *bucket;
++
++ bucket = ino_dev_hashtable[hash_inode(statbuf->st_ino)];
++ while (bucket != NULL) {
++ if ((bucket->ino == statbuf->st_ino) &&
++ (bucket->dev == statbuf->st_dev))
++ {
++ if (name) *name = bucket->name;
++ return 1;
++ }
++ bucket = bucket->next;
++ }
++ return 0;
++}
+
++/* Add statbuf to statbuf hash table */
++static void add_to_ino_dev_hashtable(const struct stat *statbuf, const char *name)
++{
++ int i;
++ size_t s;
++ ino_dev_hashtable_bucket_t *bucket;
++
++ i = hash_inode(statbuf->st_ino);
++ s = name ? strlen(name) : 0;
++ bucket = malloc(sizeof(ino_dev_hashtable_bucket_t) + s);
++ bucket->ino = statbuf->st_ino;
++ bucket->dev = statbuf->st_dev;
++ if (name)
++ strcpy(bucket->name, name);
++ else
++ bucket->name[0] = '\0';
++ bucket->next = ino_dev_hashtable[i];
++ ino_dev_hashtable[i] = bucket;
++}
+
++/* Clear statbuf hash table */
++static void reset_ino_dev_hashtable(void)
++{
++ int i;
++ ino_dev_hashtable_bucket_t *bucket;
++ for (i = 0; i < HASH_SIZE; i++) {
++ while (ino_dev_hashtable[i] != NULL) {
++ bucket = ino_dev_hashtable[i]->next;
++ free(ino_dev_hashtable[i]);
++ ino_dev_hashtable[i] = bucket;
++ }
++ }
++}
++
++static int count_ino_in_hashtable(void)
++{
++ long count = 0;
++ int i;
++
++ for (i = 0; i < HASH_SIZE; i++) {
++ ino_dev_hashtable_bucket_t *bucket = ino_dev_hashtable[i];
++ while (bucket != NULL) {
++ count++;
++ bucket = bucket->next;
++ }
++ }
++
++ return count;
++}
++#endif
+ // block size
-@@ -76,10 +88,14 @@
#define BLOCKSIZE 1024
#define BLOCKS_PER_GROUP 8192
#define BYTES_PER_INODE (8*BLOCKSIZE)
+-#define RESERVED_INODES 5/100
+/* Percentage of blocks that are reserved.*/
- #define RESERVED_INODES 5/100
++#define RESERVED_BLOCKS 5/100
++#define MAX_RESERVED_BLOCKS 25/100
// inode block size (why is it != BLOCKSIZE ?!?)
#define INODE_BLOCKSIZE 512
#define INOBLK (BLOCKSIZE / INODE_BLOCKSIZE)
-@@ -147,6 +163,39 @@
+@@ -115,18 +224,20 @@
+ // file modes
+
+ #define FM_IFMT 0xF000 // format mask
+-#define FM_IFLNK 0xA000 // socket
+-#define FM_IFSOCK 0xC000 // symbolic link
++#define FM_IFLNK 0xA000 // symbolic link
++#define FM_IFSOCK 0xC000 // socket
+ #define FM_IFREG 0x8000 // regular file
+ #define FM_IFBLK 0x6000 // block device
+ #define FM_IFDIR 0x4000 // directory
+ #define FM_IFCHR 0x2000 // character device
+ #define FM_IFIFO 0x1000 // fifo
+
++#define FM_IMASK 0x0FFF // all perms
+ #define FM_ISUID 0x0800 // SUID
+ #define FM_ISGID 0x0400 // SGID
+ #define FM_ISVTX 0x0200 // sticky bit
+
++
+ #define FM_IRWXU 0x01C0 // user mask
+ #define FM_IRUSR 0x0100 // read
+ #define FM_IWUSR 0x0080 // write
+@@ -147,6 +258,39 @@
#define OP_HOLES 0x01 // make files with holes
+/* Defines for accessing group details */
+
+// Number of groups in the filesystem
-+#define GRP_NBGROUPS(fs) ( ((fs)->sb.s_blocks_count-1)/(fs)->sb.s_blocks_per_group )
++#define GRP_NBGROUPS(fs) (((fs)->sb.s_blocks_count+(fs)->sb.s_blocks_per_group-1)/(fs)->sb.s_blocks_per_group)
+
+// Get group block bitmap (bbm) given the group number
+#define GRP_GET_GROUP_BBM(fs,grp) ( get_blk((fs),(fs)->gd[(grp)].bg_block_bitmap) )
// used types
-@@ -287,7 +336,6 @@
+@@ -176,7 +320,7 @@
+ #define SCANF_PREFIX "511"
+ #define SCANF_STRING(s) (s = malloc(512))
+ #define GETCWD_SIZE -1
+-inline int snprintf(char *str, size_t n, const char *fmt, ...)
++static inline int snprintf(char *str, size_t n, const char *fmt, ...)
+ {
+ int ret;
+ va_list ap;
+@@ -190,12 +334,12 @@
+
+ // endianness swap
+
+-inline uint16 swab16(uint16 val)
++static inline uint16 swab16(uint16 val)
+ {
+ return (val >> 8) | (val << 8);
+ }
+
+-inline uint32 swab32(uint32 val)
++static inline uint32 swab32(uint32 val)
+ {
+ return ((val>>24) | ((val>>8)&0xFF00) |
+ ((val<<8)&0xFF0000) | (val<<24));
+@@ -287,7 +431,6 @@
{
groupdescriptor_decl
uint32 bg_reserved[3];
} groupdescriptor;
typedef struct
-@@ -304,6 +352,32 @@
+@@ -304,6 +447,32 @@
typedef uint8 block[BLOCKSIZE];
typedef struct
{
uint32 bnum;
-@@ -313,15 +387,14 @@
+@@ -313,15 +482,14 @@
uint32 bptind;
} blockwalker;
#if BLOCKSIZE == 1024
typedef struct
{
- block zero; // The famous block 0
- superblock sb; // The superblock
+- block zero; // The famous block 0
+- superblock sb; // The superblock
- groupdescriptor gd; // The group desciptor
- block bbm; // The block bitmap
- block ibm; // The inode bitmap
- inode itab[0]; // The inode table
++ block zero; // The famous block 0
++ superblock sb; // The superblock
+ groupdescriptor gd[0]; // The group descriptors
} filesystem;
#else
#error UNHANDLED BLOCKSIZE
-@@ -389,25 +462,113 @@
+@@ -345,35 +513,35 @@
+ #define udecl32(x) this->x = swab32(this->x);
+ #define utdecl32(x,n) { int i; for(i=0; i<n; i++) this->x[i] = swab32(this->x[i]); }
+
+-void swap_sb(superblock *sb)
++static void swap_sb(superblock *sb)
+ {
+ #define this sb
+ superblock_decl
+ #undef this
+ }
+
+-void swap_gd(groupdescriptor *gd)
++static void swap_gd(groupdescriptor *gd)
+ {
+ #define this gd
+ groupdescriptor_decl
+ #undef this
+ }
+
+-void swap_nod(inode *nod)
++static void swap_nod(inode *nod)
+ {
+ #define this nod
+ inode_decl
+ #undef this
+ }
+
+-void swap_dir(directory *dir)
++static void swap_dir(directory *dir)
+ {
+ #define this dir
+ directory_decl
+ #undef this
+ }
+
+-void swap_block(block b)
++static void swap_block(block b)
+ {
+ int i;
+ uint32 *blk = (uint32*)b;
+@@ -389,67 +557,158 @@
#undef udecl32
#undef utdecl32
-char * argv0;
+static char * app_name;
-+static int squash_uids = 0;
-+static int squash_perms = 0;
+static const char *const memory_exhausted = "memory exhausted";
// error (un)handling
+ s = ": ";
+ fprintf(stderr, "%s%s\n", s, strerror(err));
+}
-+
+#if 0
+static void perror_msg(const char *s, ...)
+{
+ vperror_msg(s, p);
+ va_end(p);
+ exit(EXIT_FAILURE);
- }
-
--inline void pexit(const char * fname)
++}
++
+static FILE *xfopen(const char *path, const char *mode)
- {
-- fprintf(stderr, "%s: ", argv0);
-- perror(fname);
-- exit(1);
++{
+ FILE *fp;
+ if ((fp = fopen(path, mode)) == NULL)
+ perror_msg_and_die("%s", path);
+ if (t == NULL)
+ error_msg_and_die(memory_exhausted);
+ return t;
-+}
-+
-+extern void *xrealloc(void *ptr, size_t size)
-+{
+ }
+
+-inline void pexit(const char * fname)
++static void *xrealloc(void *ptr, size_t size)
+ {
+- fprintf(stderr, "%s: ", argv0);
+- perror(fname);
+- exit(1);
+ ptr = realloc(ptr, size);
+ if (ptr == NULL && size != 0)
+ error_msg_and_die(memory_exhausted);
+ while (bufsize < readsize + 1);
+
+ buf[readsize] = '\0';
-+
+ return buf;
}
// printf helper macro
-@@ -423,7 +584,7 @@
+ #define plural(a) (a), ((a) > 1) ? "s" : ""
+
+ // temporary working block
+-inline uint8 * get_workblk(void)
++static inline uint8 * get_workblk(void)
{
+- static block b;
++ unsigned char* b=calloc(1,BLOCKSIZE);
+ return b;
+ }
+-inline void free_workblk(block b)
++static inline void free_workblk(block b)
+ {
++ free(b);
}
-// rounds a quantity up to a blocksize
+-uint32 rndup(uint32 qty, uint32 siz)
+/* Rounds qty upto a multiple of siz. siz should be a power of 2 */
- uint32 rndup(uint32 qty, uint32 siz)
++static uint32 rndup(uint32 qty, uint32 siz)
{
return (qty + (siz - 1)) & ~(siz - 1);
-@@ -444,7 +605,13 @@
+ }
+
+ // check if something is allocated in the bitmap
+-inline uint32 allocated(block b, uint32 item)
++static inline uint32 allocated(block b, uint32 item)
+ {
+ return b[(item-1) / 8] & (1 << ((item-1) % 8));
+ }
+
+ // return a given block from a filesystem
+-inline uint8 * get_blk(filesystem *fs, uint32 blk)
++static inline uint8 * get_blk(filesystem *fs, uint32 blk)
+ {
+ return (uint8*)fs + blk*BLOCKSIZE;
+ }
+
// return a given inode from a filesystem
- inline inode * get_nod(filesystem *fs, uint32 nod)
+-inline inode * get_nod(filesystem *fs, uint32 nod)
++static inline inode * get_nod(filesystem *fs, uint32 nod)
{
- return &fs->itab[nod-1];
+ int grp,offset;
}
// allocate a given block/inode in the bitmap
-@@ -479,29 +646,57 @@
+ // allocate first free if item == 0
+-uint32 allocate(block b, uint32 item)
++static uint32 allocate(block b, uint32 item)
+ {
+ if(!item)
+ {
+@@ -473,39 +732,67 @@
+ }
+
+ // deallocate a given block/inode
+-void deallocate(block b, uint32 item)
++static void deallocate(block b, uint32 item)
+ {
+ b[(item-1) / 8] &= ~(1 << ((item-1) % 8));
}
// allocate a block
-uint32 alloc_blk(filesystem *fs)
-+uint32 alloc_blk(filesystem *fs, uint32 nod)
++static uint32 alloc_blk(filesystem *fs, uint32 nod)
{
- uint32 bk;
- if(!(bk = allocate(fs->bbm, 0)))
}
// allocate an inode
- uint32 alloc_nod(filesystem *fs)
+-uint32 alloc_nod(filesystem *fs)
++static uint32 alloc_nod(filesystem *fs)
{
- uint32 nod;
- if(!(nod = allocate(fs->ibm, 0)))
}
// print a bitmap allocation
-@@ -546,14 +741,14 @@
+-void print_bm(block b, uint32 max)
++static void print_bm(block b, uint32 max)
+ {
+ uint32 i;
+ printf("----+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8----+----9----+----0\n");
+@@ -520,7 +807,7 @@
+ }
+
+ // initalize a blockwalker (iterator for blocks list)
+-void init_bw(filesystem *fs, uint32 nod, blockwalker *bw)
++static void init_bw(filesystem *fs, uint32 nod, blockwalker *bw)
+ {
+ bw->bnum = 0;
+ bw->bpdir = EXT2_INIT_BLOCK;
+@@ -529,7 +816,7 @@
+ // return next block of inode (WALK_END for end)
+ // if create>0, append a newly allocated block at the end
+ // if hole!=0, create a hole in the file
+-uint32 walk_bw(filesystem *fs, uint32 nod, blockwalker *bw, uint32 *create, uint32 hole)
++static uint32 walk_bw(filesystem *fs, uint32 nod, blockwalker *bw, uint32 *create, uint32 hole)
+ {
+ uint32 *bkref = 0;
+ uint32 *b;
+@@ -546,14 +833,14 @@
{
bkref = &get_nod(fs, nod)->i_block[bw->bpdir = 0];
if(extend) // allocate first block
}
// first block in indirect block
else if(bw->bpdir == EXT2_NDIR_BLOCKS)
-@@ -562,11 +757,11 @@
+@@ -562,11 +849,11 @@
bw->bpdir = EXT2_IND_BLOCK;
bw->bpind = 0;
if(extend) // allocate indirect block
}
// block in indirect block
else if((bw->bpdir == EXT2_IND_BLOCK) && (bw->bpind < BLOCKSIZE/4 - 1))
-@@ -575,7 +770,7 @@
+@@ -575,7 +862,7 @@
b = (uint32*)get_blk(fs, get_nod(fs, nod)->i_block[bw->bpdir]);
bkref = &b[bw->bpind];
if(extend) // allocate block
}
// first block in first indirect block in first double indirect block
else if(bw->bpdir == EXT2_IND_BLOCK)
-@@ -585,14 +780,14 @@
+@@ -585,14 +872,14 @@
bw->bpind = 0;
bw->bpdind = 0;
if(extend) // allocate double indirect block
}
// block in indirect block in double indirect block
else if((bw->bpdir == EXT2_DIND_BLOCK) && (bw->bpdind < BLOCKSIZE/4 - 1))
-@@ -602,7 +797,7 @@
+@@ -602,7 +889,7 @@
b = (uint32*)get_blk(fs, b[bw->bpind]);
bkref = &b[bw->bpdind];
if(extend) // allocate block
}
// first block in indirect block in double indirect block
else if((bw->bpdir == EXT2_DIND_BLOCK) && (bw->bpind < BLOCKSIZE/4 - 1))
-@@ -612,20 +807,100 @@
+@@ -612,20 +899,100 @@
bw->bpind++;
b = (uint32*)get_blk(fs, get_nod(fs, nod)->i_block[bw->bpdir]);
if(extend) // allocate indirect block
}
if(extend)
get_nod(fs, nod)->i_blocks = bw->bnum * INOBLK;
-@@ -663,23 +938,40 @@
+@@ -633,7 +1000,7 @@
+ }
+
+ // add blocks to an inode (file/dir/etc...)
+-void extend_blk(filesystem *fs, uint32 nod, block b, int amount)
++static void extend_blk(filesystem *fs, uint32 nod, block b, int amount)
+ {
+ int create = amount;
+ blockwalker bw, lbw;
+@@ -662,24 +1029,35 @@
+ }
}
++static void truncate_nod(filesystem *fs, uint32 nod)
++{
++ inode *node = get_nod(fs, nod);
++assert(!node->i_size);
++#warning truncate_nod() no yet implemented
++}
++
// link an entry (inode #) to a directory
-void add2dir(filesystem *fs, uint32 dnod, uint32 nod, const char* name)
-+void add2dir(filesystem *fs, uint32 dnod, uint32 nod, const char* name, uint32 mode, uid_t uid, gid_t gid, time_t ctime)
++static void add2dir(filesystem *fs, uint32 dnod, uint32 nod, const char* name)
{
blockwalker bw;
uint32 bk;
- errexit("can't add '%s' to a non-directory", name);
+ inode *node;
+ inode *pnode;
-+
-+ /* Squash all permissions so files are owned by root
-+ * and file permissions have group/other perms removed */
-+ if (squash_uids) {
-+ uid = gid = 0;
-+ }
-+ if (squash_perms) {
-+ if (!S_ISLNK(mode)) {
-+ mode &= ~(S_IWGRP | S_IWOTH);
-+ mode &= ~(S_ISUID | S_ISGID);
-+ }
-+ }
+
+ pnode = get_nod(fs, dnod);
-+
-+ if(!S_ISDIR(pnode->i_mode))
++ if((pnode->i_mode & FM_IFMT) != FM_IFDIR)
+ error_msg_and_die("can't add '%s' to a non-directory", name);
if(!*name)
- errexit("bad name '%s' (not meaningful)", name);
-+ error_msg_and_die("bad name '%s' (not meaningful)", name);
++ error_msg_and_die("can't create an inode with an empty name");
if(strchr(name, '/'))
- errexit("bad name '%s' (contains a slash)", name);
+ error_msg_and_die("bad name '%s' (contains a slash)", name);
init_bw(fs, dnod, &bw);
while((bk = walk_bw(fs, dnod, &bw, 0, 0)) != WALK_END) // for all blocks in dir
{
-@@ -691,9 +983,16 @@
+@@ -691,7 +1069,8 @@
if((!d->d_inode) && (d->d_rec_len >= reclen))
{
d->d_inode = nod;
+ node = get_nod(fs, nod);
+ node->i_links_count++;
d->d_name_len = nlen;
-- strncpy(d->d_name, name, nlen);
-+ strncpy(d->d_name, name, rndup(nlen,4));
-+ node->i_mode = mode;
-+ node->i_uid = uid;
-+ node->i_gid = gid;
-+ node->i_atime = ctime;
-+ node->i_ctime = ctime;
-+ node->i_mtime = ctime;
+ strncpy(d->d_name, name, nlen);
return;
- }
- // if entry with enough room (last one?), shrink it & use it
-@@ -705,9 +1004,16 @@
+@@ -705,7 +1084,8 @@
d = (directory*) (((int8*)d) + d->d_rec_len);
d->d_rec_len = reclen;
d->d_inode = nod;
+ node = get_nod(fs, nod);
+ node->i_links_count++;
d->d_name_len = nlen;
-- strncpy(d->d_name, name, nlen);
-+ strncpy(d->d_name, name, rndup(nlen,4));
-+ node->i_mode = mode;
-+ node->i_uid = uid;
-+ node->i_gid = gid;
-+ node->i_atime = ctime;
-+ node->i_ctime = ctime;
-+ node->i_mtime = ctime;
+ strncpy(d->d_name, name, nlen);
return;
- }
- }
-@@ -716,10 +1022,17 @@
+@@ -716,7 +1096,8 @@
b = get_workblk();
d = (directory*)b;
d->d_inode = nod;
+ node->i_links_count++;
d->d_rec_len = BLOCKSIZE;
d->d_name_len = nlen;
-- strncpy(d->d_name, name, nlen);
-+ strncpy(d->d_name, name, rndup(nlen,4));
-+ node->i_mode = mode;
-+ node->i_uid = uid;
-+ node->i_gid = gid;
-+ node->i_atime = ctime;
-+ node->i_ctime = ctime;
-+ node->i_mtime = ctime;
- extend_blk(fs, dnod, b, 1);
- get_nod(fs, dnod)->i_size += BLOCKSIZE;
- free_workblk(b);
-@@ -747,7 +1060,7 @@
+ strncpy(d->d_name, name, nlen);
+@@ -726,7 +1107,7 @@
+ }
+
+ // find an entry in a directory
+-uint32 find_dir(filesystem *fs, uint32 nod, const char * name)
++static uint32 find_dir(filesystem *fs, uint32 nod, const char * name)
+ {
+ blockwalker bw;
+ uint32 bk;
+@@ -745,9 +1126,9 @@
+ }
+
// find the inode of a full path
- uint32 find_path(filesystem *fs, uint32 nod, const char * name)
+-uint32 find_path(filesystem *fs, uint32 nod, const char * name)
++static uint32 find_path(filesystem *fs, uint32 nod, const char * name)
{
- char *p, *n, *n2 = strdup(name);
+ char *p, *n, *n2 = xstrdup(name);
n = n2;
while(*n == '/')
{
-@@ -770,27 +1083,32 @@
+@@ -769,28 +1150,62 @@
+ return nod;
}
- // make a full-fledged directory (i.e. with "." & "..")
+-// make a full-fledged directory (i.e. with "." & "..")
-uint32 mkdir_fs(filesystem *fs, uint32 parent_nod, const char *name, uint32 mode)
-+uint32 mkdir_fs(filesystem *fs, uint32 parent_nod, const char *name, uint32 mode,
-+ uid_t uid, gid_t gid, time_t ctime)
++// create a simple inode
++static uint32 mknod_fs(filesystem *fs, uint32 parent_nod, const char *name, uint32 mode, uint16 uid, uint16 gid, uint8 major, uint8 minor, uint32 ctime, uint32 mtime)
{
uint32 nod;
++ inode *node;
if((nod = find_dir(fs, parent_nod, name)))
- return nod;
- nod = alloc_nod(fs);
+- return nod;
+- nod = alloc_nod(fs);
- get_nod(fs, nod)->i_mode = FM_IFDIR | mode;
- add2dir(fs, parent_nod, nod, name);
- add2dir(fs, nod, nod, ".");
- add2dir(fs, nod, parent_nod, "..");
- fs->gd.bg_used_dirs_count++;
-+ if (!(mode & FM_IFDIR))
-+ mode |= FM_IFDIR;
-+ add2dir(fs, parent_nod, nod, name, mode, uid, gid, ctime);
-+ add2dir(fs, nod, nod, ".", mode, uid, gid, ctime);
-+ add2dir(fs, nod, parent_nod, "..", mode, uid, gid, ctime);
-+ fs->gd[GRP_GROUP_OF_INODE(fs,nod)].bg_used_dirs_count++;
++ {
++ node = get_nod(fs, nod);
++ if((node->i_mode & FM_IFMT) != (mode & FM_IFMT))
++ error_msg_and_die("node '%s' already exists and isn't of the same type", name);
++ node->i_mode = mode;
++ }
++ else
++ {
++ nod = alloc_nod(fs);
++ node = get_nod(fs, nod);
++ node->i_mode = mode;
++ add2dir(fs, parent_nod, nod, name);
++ switch(mode & FM_IFMT)
++ {
++ case FM_IFLNK:
++ mode = FM_IFLNK | FM_IRWXU | FM_IRWXG | FM_IRWXO;
++ break;
++ case FM_IFBLK:
++ case FM_IFCHR:
++ ((uint8*)get_nod(fs, nod)->i_block)[0] = minor;
++ ((uint8*)get_nod(fs, nod)->i_block)[1] = major;
++ break;
++ case FM_IFDIR:
++ add2dir(fs, nod, nod, ".");
++ add2dir(fs, nod, parent_nod, "..");
++ fs->gd[GRP_GROUP_OF_INODE(fs,nod)].bg_used_dirs_count++;
++ break;
++ }
++ }
++ node->i_uid = uid;
++ node->i_gid = gid;
++ node->i_atime = mtime;
++ node->i_ctime = ctime;
++ node->i_mtime = mtime;
return nod;
}
++// make a full-fledged directory (i.e. with "." & "..")
++static inline uint32 mkdir_fs(filesystem *fs, uint32 parent_nod, const char *name, uint32 mode,
++ uid_t uid, gid_t gid, uint32 ctime, uint32 mtime)
++{
++ return mknod_fs(fs, parent_nod, name, mode|FM_IFDIR, uid, gid, 0, 0, ctime, mtime);
++}
++
// make a symlink
-uint32 mklink_fs(filesystem *fs, uint32 parent_nod, const char *name, size_t size, uint8 * b)
-+uint32 mklink_fs(filesystem *fs, uint32 parent_nod, const char *name, size_t size,
-+ uint8 * b, uid_t uid, gid_t gid, time_t ctime)
++static uint32 mklink_fs(filesystem *fs, uint32 parent_nod, const char *name, size_t size, uint8 *b, uid_t uid, gid_t gid, uint32 ctime, uint32 mtime)
{
-+ uint32 mode;
- uint32 nod = alloc_nod(fs);
-+ mode = FM_IFLNK | FM_IRWXU | FM_IRWXG | FM_IRWXO;
- get_nod(fs, nod)->i_mode = FM_IFLNK | FM_IRWXU | FM_IRWXG | FM_IRWXO;
+- uint32 nod = alloc_nod(fs);
+- get_nod(fs, nod)->i_mode = FM_IFLNK | FM_IRWXU | FM_IRWXG | FM_IRWXO;
++ uint32 nod = mknod_fs(fs, parent_nod, name, FM_IFLNK | FM_IRWXU | FM_IRWXG | FM_IRWXO, uid, gid, 0, 0, ctime, mtime);
++ truncate_nod(fs, nod);
get_nod(fs, nod)->i_size = size;
- add2dir(fs, parent_nod, nod, name);
-+ add2dir(fs, parent_nod, nod, name, mode, uid, gid, ctime);
if(size <= 4 * (EXT2_TIND_BLOCK+1))
{
strncpy((char*)get_nod(fs, nod)->i_block, (char*)b, size);
-@@ -801,15 +1119,15 @@
+@@ -801,228 +1216,361 @@
}
// make a file from a FILE*
-uint32 mkfile_fs(filesystem *fs, uint32 parent_nod, const char *name, uint32 mode, size_t size, FILE *f)
-+uint32 mkfile_fs(filesystem *fs, uint32 parent_nod, const char *name, uint32 mode, size_t size, FILE *f, uid_t uid, gid_t gid, time_t ctime)
++static uint32 mkfile_fs(filesystem *fs, uint32 parent_nod, const char *name, uint32 mode, size_t size, FILE *f, uid_t uid, gid_t gid, uint32 ctime, uint32 mtime)
{
uint8 * b;
- uint32 nod = alloc_nod(fs);
+- uint32 nod = alloc_nod(fs);
- get_nod(fs, nod)->i_mode = FM_IFREG | mode;
-+ mode |= FM_IFREG;
++ uint32 nod = mknod_fs(fs, parent_nod, name, mode|FM_IFREG, uid, gid, 0, 0, ctime, mtime);
++ truncate_nod(fs, nod);
get_nod(fs, nod)->i_size = size;
- add2dir(fs, parent_nod, nod, name);
-+ add2dir(fs, parent_nod, nod, name, mode, uid, gid, ctime);
if(!(b = (uint8*)malloc(rndup(size, BLOCKSIZE))))
- errexit("not enough mem to read file '%s'", name);
+ error_msg_and_die("not enough mem to read file '%s'", name);
memset(b, 0,rndup(size, BLOCKSIZE));
if(f)
- fread(b, size, 1, f);
-@@ -824,6 +1142,15 @@
- uint32 get_mode(struct stat *st)
+- fread(b, size, 1, f);
++ fread(b, size, 1, f); // FIXME: ugly. use mmap() ...
+ else
+- memset(b, 0, size);
++ memset(b, 0, size); // .. or handle b = 0
+ extend_blk(fs, nod, b, rndup(size, BLOCKSIZE) / BLOCKSIZE);
+ free(b);
+ return nod;
+ }
+
+ // retrieves a mode info from a struct stat
+-uint32 get_mode(struct stat *st)
++static uint32 get_mode(struct stat *st)
{
uint32 mode = 0;
-+
-+ /* Squash file permissions as needed */
-+ if (squash_perms) {
-+ if (!S_ISLNK(mode)) {
-+ st->st_mode &= ~(S_IWGRP | S_IWOTH);
-+ st->st_mode &= ~(S_ISUID | S_ISGID);
-+ }
-+ }
+
if(st->st_mode & S_IRUSR)
- mode |= FM_IRUSR | FM_IRGRP | FM_IROTH;
+- mode |= FM_IRUSR | FM_IRGRP | FM_IROTH;
++ mode |= FM_IRUSR;
if(st->st_mode & S_IWUSR)
-@@ -833,30 +1160,17 @@
+- mode |= FM_IWUSR | FM_IWGRP | FM_IWOTH;
++ mode |= FM_IWUSR;
+ if(st->st_mode & S_IXUSR)
+- mode |= FM_IXUSR | FM_IXGRP | FM_IXOTH;
++ mode |= FM_IXUSR;
++ if(st->st_mode & S_IRGRP)
++ mode |= FM_IRGRP;
++ if(st->st_mode & S_IWGRP)
++ mode |= FM_IWGRP;
++ if(st->st_mode & S_IXGRP)
++ mode |= FM_IXGRP;
++ if(st->st_mode & S_IROTH)
++ mode |= FM_IROTH;
++ if(st->st_mode & S_IWOTH)
++ mode |= FM_IWOTH;
++ if(st->st_mode & S_IXOTH)
++ mode |= FM_IXOTH;
++ if(st->st_mode & S_ISUID)
++ mode |= FM_ISUID;
++ if(st->st_mode & S_ISGID)
++ mode |= FM_ISGID;
++ if(st->st_mode & S_ISVTX)
++ mode |= FM_ISVTX;
return mode;
}
- return mode;
-}
-
- // basename of a path - free me
- char * basename(const char * fullpath)
- {
- char * p = strrchr(fullpath, '/');
+-// basename of a path - free me
+-char * basename(const char * fullpath)
+-{
+- char * p = strrchr(fullpath, '/');
- return strdup(p ? p + 1 : fullpath);
-+ return xstrdup(p ? p + 1 : fullpath);
- }
-
- // dirname of a path - free me
- char * dirname(const char * fullpath)
- {
+-}
+-
+-// dirname of a path - free me
+-char * dirname(const char * fullpath)
+-{
- char * p, * n = strdup(fullpath);
-+ char * p, * n = xstrdup(fullpath);
- if((p = strrchr(n, '/')))
- *(p+1) = 0;
- else
-@@ -864,66 +1178,6 @@
- return n;
- }
+- if((p = strrchr(n, '/')))
+- *(p+1) = 0;
+- else
+- *n = 0;
+- return n;
+-}
++// add or fixup entries to the filesystem from a text file
++/* device table entries take the form of:
++ <path> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
++ /dev/mem c 640 0 0 1 1 0 0 -
++
++ type can be one of:
++ f A regular file
++ d Directory
++ c Character special device file
++ b Block special device file
++ p Fifo (named pipe)
++
++ I don't bother with symlinks (permissions are irrelevant), hard
++ links (special cases of regular files), or sockets (why bother).
++
++ Regular files must exist in the target root directory. If a char,
++ block, fifo, or directory does not exist, it will be created.
++*/
++
++static void add2fs_from_file(filesystem *fs, uint32 this_nod, FILE * fh, int squash_uids, int squash_perms, struct stats *stats)
++{
++ unsigned long mode, uid, gid, major, minor;
++ unsigned long start, increment, count;
++ uint32 nod, ctime, mtime;
++ char *c, type, *path = NULL, *path2 = NULL, *dir, *name, *line = NULL;
++ size_t len;
++ struct stat st;
++ int nbargs, lineno = 0;
-// adds entries to the filesystem from a text file
-void add2fs_from_file(filesystem *fs, uint32 this_nod, FILE * fh)
- break;
- mode = get_modestr(cmod + 1);
- switch(*cmod)
-- {
++ fstat(fileno(fh), &st);
++ ctime = st.st_ctime;
++ mtime = st.st_mtime;
++ while(getline(&line, &len, fh) >= 0)
++ {
++ mode = uid = gid = major = minor = 0;
++ start = 0; increment = 1; count = 0;
++ lineno++;
++ if((c = strchr(line, '#')))
++ *c = 0;
++ free(path); path = NULL;
++ free(path2); path2 = NULL;
++ nbargs = sscanf (line, "%" SCANF_PREFIX "s %c %lo %lu %lu %lu %lu %lu %lu %lu",
++ SCANF_STRING(path), &type, &mode, &uid, &gid, &major, &minor,
++ &start, &increment, &count);
++ if(nbargs < 3)
+ {
- case 'd':
- fscanf(fh, "%" SCANF_PREFIX "s\n", SCANF_STRING(path));
- break;
- continue;
- default:
- errexit("malformed text input file");
-- }
++ if(nbargs > 0)
++ error_msg("device table line %d skipped: bad format for entry '%s'", lineno, path);
++ continue;
+ }
- name = basename(path);
- dir = dirname(path);
- free(path);
- errexit("can't find directory '%s' to create '%s''", dir, name);
- free(dir);
- if((!strcmp(name, ".")) || (!strcmp(name, "..")))
-- {
++ if(stats)
+ {
- free(name);
- continue;
-- }
++ stats->ninodes += count ? count : 1;
+ }
- switch(*cmod)
-- {
++ else
+ {
- case 'd':
- mkdir_fs(fs, nod, name, mode);
- break;
- ((uint8*)get_nod(fs, nod2)->i_block)[1] = major;
- add2dir(fs, nod, nod2, name);
- break;
-- }
++ if(squash_uids)
++ uid = gid = 0;
++ if(squash_perms)
++ mode &= ~(FM_IRWXG | FM_IRWXO);
++ mode &= FM_IMASK;
++ path2 = strdup(path);
++ name = basename(path);
++ dir = dirname(path2);
++ if(!(nod = find_path(fs, this_nod, dir)))
++ {
++ error_msg("device table line %d skipped: can't find directory '%s' to create '%s''", lineno, dir, name);
++ continue;
++ }
++ if((!strcmp(name, ".")) || (!strcmp(name, "..")))
++ {
++ error_msg("device table line %d skipped", lineno);
++ continue;
++ }
++
++ switch (type)
++ {
++ case 'd':
++ mode |= FM_IFDIR;
++ break;
++ case 'f':
++ mode |= FM_IFREG;
++ break;
++ case 'p':
++ mode |= FM_IFIFO;
++ break;
++ case 'c':
++ mode |= FM_IFCHR;
++ break;
++ case 'b':
++ mode |= FM_IFBLK;
++ break;
++ default:
++ error_msg("device table line %d skipped: bad type '%c' for entry '%s'", lineno, type, name);
++ continue;
++ }
++ if(count > 0)
++ {
++ char *dname;
++ unsigned i, len;
++ len = strlen(name) + 10;
++ dname = malloc(len + 1);
++ for(i = start; i < count; i++)
++ {
++ snprintf(dname, len, "%s%u", name, i);
++ mknod_fs(fs, nod, dname, mode, uid, gid, major, minor + (i * increment - start), ctime, mtime);
++ }
++ free(dname);
++ }
++ else
++ mknod_fs(fs, nod, name, mode, uid, gid, major, minor, ctime, mtime);
+ }
- free(name);
-- }
--}
--
+ }
++ free(line);
++ free(path);
++ free(path2);
+ }
+
// adds a tree of entries to the filesystem from current dir
- void add2fs_from_dir(filesystem *fs, uint32 this_nod)
+-void add2fs_from_dir(filesystem *fs, uint32 this_nod)
++static void add2fs_from_dir(filesystem *fs, uint32 this_nod, int squash_uids, int squash_perms, struct stats *stats)
{
-@@ -934,7 +1188,7 @@
+ uint32 nod;
++ uint32 uid, gid, mode, ctime, mtime;
++ const char *name;
+ FILE *fh;
+ DIR *dh;
+ struct dirent *dent;
struct stat st;
uint8 *b;
if(!(dh = opendir(".")))
while((dent = readdir(dh)))
{
if((!strcmp(dent->d_name, ".")) || (!strcmp(dent->d_name, "..")))
-@@ -948,31 +1202,27 @@
- get_nod(fs, nod)->i_mode = (((st.st_mode & S_IFMT) == S_IFCHR) ? FM_IFCHR : FM_IFBLK) | get_mode(&st);
- ((uint8*)get_nod(fs, nod)->i_block)[0] = (st.st_rdev & 0xff);
- ((uint8*)get_nod(fs, nod)->i_block)[1] = (st.st_rdev >> 8);
+ continue;
+ lstat(dent->d_name, &st);
+- switch(st.st_mode & S_IFMT)
+- {
+- case S_IFCHR:
+- case S_IFBLK:
+- nod = alloc_nod(fs);
+- get_nod(fs, nod)->i_mode = (((st.st_mode & S_IFMT) == S_IFCHR) ? FM_IFCHR : FM_IFBLK) | get_mode(&st);
+- ((uint8*)get_nod(fs, nod)->i_block)[0] = (st.st_rdev & 0xff);
+- ((uint8*)get_nod(fs, nod)->i_block)[1] = (st.st_rdev >> 8);
- add2dir(fs, this_nod, nod, dent->d_name);
-+ add2dir(fs, this_nod, nod, dent->d_name, st.st_mode, st.st_uid, st.st_gid, st.st_ctime);
- break;
- case S_IFLNK:
+- break;
+- case S_IFLNK:
- if(!(b = (uint8*)malloc(rndup(st.st_size, BLOCKSIZE))))
- errexit("out of memory");
- if(readlink(dent->d_name, (char*)b, st.st_size) < 0)
- pexit(dent->d_name);
- mklink_fs(fs, this_nod, dent->d_name, st.st_size, b);
-+ b = xreadlink(dent->d_name);
-+ mklink_fs(fs, this_nod, dent->d_name, st.st_size, b, st.st_uid, st.st_gid, st.st_ctime);
- free(b);
- break;
- case S_IFREG:
+- free(b);
+- break;
+- case S_IFREG:
- if(!(fh = fopen(dent->d_name, "r")))
- pexit(dent->d_name);
- mkfile_fs(fs, this_nod, dent->d_name, get_mode(&st), st.st_size, fh);
-+ fh = xfopen(dent->d_name, "r");
-+ mkfile_fs(fs, this_nod, dent->d_name, st.st_mode, st.st_size, fh, st.st_uid, st.st_gid, st.st_ctime);
- fclose(fh);
- break;
- case S_IFDIR:
+- fclose(fh);
+- break;
+- case S_IFDIR:
- nod = mkdir_fs(fs, this_nod, dent->d_name, get_mode(&st));
-+ nod = mkdir_fs(fs, this_nod, dent->d_name, st.st_mode, st.st_uid, st.st_gid, st.st_ctime);
- if(chdir(dent->d_name) < 0)
+- if(chdir(dent->d_name) < 0)
- pexit(dent->d_name);
-+ perror_msg_and_die(dent->d_name);
- add2fs_from_dir(fs, nod);
- chdir("..");
- break;
- default:
+- add2fs_from_dir(fs, nod);
+- chdir("..");
+- break;
+- default:
- fprintf(stderr, "ignoring entry %s", dent->d_name);
-+ error_msg("ignoring entry %s", dent->d_name);
- }
+- }
++ uid = st.st_uid;
++ gid = st.st_gid;
++ ctime = st.st_ctime;
++ mtime = st.st_mtime;
++ name = dent->d_name;
++ mode = get_mode(&st);
++ if(squash_uids)
++ uid = gid = 0;
++ if(squash_perms)
++ mode &= ~(FM_IRWXG | FM_IRWXO);
++ if(stats)
++ switch(st.st_mode & S_IFMT)
++ {
++ case S_IFLNK:
++ case S_IFREG:
++ if((st.st_mode & S_IFMT) == S_IFREG || st.st_size > 4 * (EXT2_TIND_BLOCK+1))
++ stats->nblocks += (st.st_size + BLOCKSIZE - 1) / BLOCKSIZE;
++ case S_IFCHR:
++ case S_IFBLK:
++ case S_IFIFO:
++ stats->ninodes++;
++ break;
++ case S_IFDIR:
++ stats->ninodes++;
++ if(chdir(dent->d_name) < 0)
++ perror_msg_and_die(dent->d_name);
++ add2fs_from_dir(fs, nod, squash_uids, squash_perms, stats);
++ chdir("..");
++ break;
++ default:
++ break;
++ }
++ else
++ switch(st.st_mode & S_IFMT)
++ {
++ case S_IFCHR:
++ mknod_fs(fs, this_nod, name, mode|FM_IFCHR, uid, gid, st.st_rdev >> 8, st.st_rdev & 0xff, ctime, mtime);
++ break;
++ case S_IFBLK:
++ mknod_fs(fs, this_nod, name, mode|FM_IFBLK, uid, gid, st.st_rdev >> 8, st.st_rdev & 0xff, ctime, mtime);
++ break;
++ case S_IFIFO:
++ mknod_fs(fs, this_nod, name, mode|FM_IFIFO, uid, gid, 0, 0, ctime, mtime);
++ break;
++ case S_IFLNK:
++ b = xreadlink(dent->d_name);
++ mklink_fs(fs, this_nod, name, st.st_size, b, uid, gid, ctime, mtime);
++ free(b);
++ break;
++ case S_IFREG:
++ fh = xfopen(dent->d_name, "r");
++ mkfile_fs(fs, this_nod, name, mode, st.st_size, fh, uid, gid, ctime, mtime);
++ fclose(fh);
++ break;
++ case S_IFDIR:
++ nod = mkdir_fs(fs, this_nod, name, mode, uid, gid, ctime, mtime);
++ if(chdir(dent->d_name) < 0)
++ perror_msg_and_die(name);
++ add2fs_from_dir(fs, nod, squash_uids, squash_perms, stats);
++ chdir("..");
++ break;
++ default:
++ error_msg("ignoring entry %s", name);
++ }
}
closedir(dh);
-@@ -981,9 +1231,11 @@
+ }
+
// endianness swap of x-indirect blocks
- void swap_goodblocks(filesystem *fs, inode *nod)
+-void swap_goodblocks(filesystem *fs, inode *nod)
++static void swap_goodblocks(filesystem *fs, inode *nod)
{
- int i;
+ int i,j,done=0;
for(i = 0; i <= EXT2_TIND_BLOCK; i++)
nod->i_block[i] = swab32(nod->i_block[i]);
if(nblk <= EXT2_IND_BLOCK)
-@@ -991,20 +1243,55 @@
+ return;
swap_block(get_blk(fs, nod->i_block[EXT2_IND_BLOCK]));
- if(nblk <= EXT2_IND_BLOCK + BLOCKSIZE/4)
+- if(nblk <= EXT2_IND_BLOCK + BLOCKSIZE/4)
++ if(nblk <= EXT2_DIND_BLOCK + BLOCKSIZE/4)
return;
+ /* Currently this will fail b'cos the number of blocks as stored
+ in i_blocks also includes the indirection blocks (see
+ started.This is benign as 0 means block 0 which has been
+ zeroed out and therefore points back to itself from any offset
+ */
++ // FIXME: I have fixed that, but I have the feeling the rest of
++ // ths function needs to be fixed for the same reasons - Xav
+ assert(nod->i_block[EXT2_DIND_BLOCK] != 0);
for(i = 0; i < BLOCKSIZE/4; i++)
-+ /* Should this be...
+- if(nblk > EXT2_IND_BLOCK + BLOCKSIZE/4 + i)
+ if(nblk > EXT2_IND_BLOCK + BLOCKSIZE/4 + (BLOCKSIZE/4)*i )
-+ */
- if(nblk > EXT2_IND_BLOCK + BLOCKSIZE/4 + i)
swap_block(get_blk(fs, ((uint32*)get_blk(fs, nod->i_block[EXT2_DIND_BLOCK]))[i]));
swap_block(get_blk(fs, nod->i_block[EXT2_DIND_BLOCK]));
if(nblk <= EXT2_IND_BLOCK + BLOCKSIZE/4 + BLOCKSIZE/4 * BLOCKSIZE/4)
+ return;
}
- void swap_badblocks(filesystem *fs, inode *nod)
+-void swap_badblocks(filesystem *fs, inode *nod)
++static void swap_badblocks(filesystem *fs, inode *nod)
{
- int i;
+ int i,j,done=0;
for(i = 0; i <= EXT2_TIND_BLOCK; i++)
nod->i_block[i] = swab32(nod->i_block[i]);
if(nblk <= EXT2_IND_BLOCK)
-@@ -1012,13 +1299,34 @@
+ return;
swap_block(get_blk(fs, nod->i_block[EXT2_IND_BLOCK]));
- if(nblk <= EXT2_IND_BLOCK + BLOCKSIZE/4)
+- if(nblk <= EXT2_IND_BLOCK + BLOCKSIZE/4)
++ if(nblk <= EXT2_DIND_BLOCK + BLOCKSIZE/4)
return;
+ /* See comment in swap_goodblocks */
+ assert(nod->i_block[EXT2_DIND_BLOCK] != 0);
swap_block(get_blk(fs, nod->i_block[EXT2_DIND_BLOCK]));
for(i = 0; i < BLOCKSIZE/4; i++)
-+ /* See comment in swap_goodblocks */
- if(nblk > EXT2_IND_BLOCK + BLOCKSIZE/4 + i)
+- if(nblk > EXT2_IND_BLOCK + BLOCKSIZE/4 + i)
++ if(nblk > EXT2_IND_BLOCK + BLOCKSIZE/4 + (BLOCKSIZE/4)*i )
swap_block(get_blk(fs, ((uint32*)get_blk(fs, nod->i_block[EXT2_DIND_BLOCK]))[i]));
if(nblk <= EXT2_IND_BLOCK + BLOCKSIZE/4 + BLOCKSIZE/4 * BLOCKSIZE/4)
return;
}
// endianness swap of the whole filesystem
-@@ -1045,7 +1353,8 @@
+-void swap_goodfs(filesystem *fs)
++static void swap_goodfs(filesystem *fs)
+ {
+ int i;
+ for(i = 1; i < fs->sb.s_inodes_count; i++)
+@@ -1045,15 +1593,17 @@
swap_goodblocks(fs, nod);
swap_nod(nod);
}
swap_sb(&fs->sb);
}
-@@ -1053,7 +1362,8 @@
+-void swap_badfs(filesystem *fs)
++static void swap_badfs(filesystem *fs)
{
int i;
swap_sb(&fs->sb);
for(i = 1; i < fs->sb.s_inodes_count; i++)
{
inode *nod = get_nod(fs, i);
-@@ -1084,53 +1394,118 @@
+@@ -1077,60 +1627,123 @@
+ }
+
+ // initialize an empty filesystem
+-filesystem * init_fs(int nbblocks, int nbinodes, int nbresrvd, int holes)
++static filesystem * init_fs(int nbblocks, int nbinodes, int nbresrvd, int holes)
+ {
+ int i;
+ filesystem *fs;
directory *d;
uint8 * b;
uint32 nod;
+ int j;
+ uint8 *bbm,*ibm;
+ inode *itab0;
++ uint32 now = time(NULL);
if(nbblocks < 16) // totally arbitrary
- errexit("too small filesystem");
- errexit("too big filesystem");
+ error_msg_and_die("too small filesystem");
+
-+ /* nbblocks is the total number of blocks in the system. First
-+ * calculate how much overhead blocks - inode table blocks,bitmap
-+ * blocks,group descriptor blocks etc. - are needed assuming each
-+ * group has BLOCKS_PER_GROUP blocks.Then recalculate nbblocks with
-+ * this figure. Each group has the same number of blocks. So the fs
-+ * has a size atleast the given value but usually rounded off to a i
-+ * higher number.
++ /* nbblocks is the total number of blocks in the filesystem. First
++ * calculate the size of each group assuming each group has
++ * BLOCKS_PER_GROUP blocks (which is the maximum). Then recalculate
++ * blocks per group so that each group (except possibly the last one)
++ * has the same number of blocks. nbinodes is the total number of
++ * inodes in the system. These are divided between all groups.
++ * Then calculate the overhead blocks - inode table blocks, bitmap
++ * blocks, group descriptor blocks etc.
+ */
-+ nbgroups = rndup(nbblocks,BLOCKS_PER_GROUP)/ BLOCKS_PER_GROUP;
-+ nbinodes_per_group = nbinodes/nbgroups +1;
-+ nbinodes_per_group = rndup(nbinodes_per_group, BLOCKSIZE/sizeof(inode));
++
++ nbgroups = (nbblocks + BLOCKS_PER_GROUP - 1) / BLOCKS_PER_GROUP;
++ nbblocks_per_group = rndup((nbblocks + nbgroups - 1)/nbgroups, 8);
++ nbinodes_per_group = rndup((nbinodes + nbgroups - 1)/nbgroups,
++ (BLOCKSIZE/sizeof(inode)));
+ if (nbinodes_per_group < 16)
+ nbinodes_per_group = 16; //minimum number b'cos the first 10 are reserved
-+ overhead_per_group = 3 /*super block,ibm,bbm*/
-+ + /* No. of blocks that the inodes occupy */
-+ nbinodes_per_group *sizeof(inode)/BLOCKSIZE
-+ + /* No. of blocks that group descriptors occupy */
-+ rndup(nbgroups*sizeof(groupdescriptor),BLOCKSIZE)/BLOCKSIZE;
-+ free_blocks = nbblocks - overhead_per_group * nbgroups - 1 /*boot block */;
-+ free_blocks_per_group = free_blocks/nbgroups;
-+ if (free_blocks > free_blocks_per_group * nbgroups)
-+ free_blocks_per_group++;
-+ nbblocks_per_group = free_blocks_per_group + overhead_per_group;
-+ /* e2fsck complains if nbblocks_per_group is not a multiple of 8 */
-+ nbblocks_per_group = rndup(nbblocks_per_group,8);
++
++ gd = rndup(nbgroups*sizeof(groupdescriptor),BLOCKSIZE)/BLOCKSIZE;
++ itbl = nbinodes_per_group * sizeof(inode)/BLOCKSIZE;
++ overhead_per_group = 3 /*sb,ibm,bbm*/ + itbl + gd;
++ free_blocks = nbblocks - overhead_per_group*nbgroups - 1 /*boot block*/;
+ free_blocks_per_group = nbblocks_per_group - overhead_per_group;
-+ if (nbblocks_per_group > BLOCKS_PER_GROUP) {
-+ /* Can this happen ? */
-+ nbblocks_per_group = BLOCKS_PER_GROUP;
-+ free_blocks_per_group = nbblocks_per_group - overhead_per_group;
-+ }
-+ nbblocks = nbblocks_per_group * nbgroups + 1;
-+
+
if(!(fs = (filesystem*)calloc(nbblocks, BLOCKSIZE)))
- errexit("not enough memory for filesystem");
fs->sb.s_blocks_count = nbblocks;
fs->sb.s_r_blocks_count = nbresrvd;
- fs->sb.s_free_blocks_count = nbblocks;
-+ fs->sb.s_free_blocks_count = free_blocks_per_group*nbgroups;
++ fs->sb.s_free_blocks_count = free_blocks;
fs->sb.s_free_inodes_count = fs->sb.s_inodes_count - EXT2_FIRST_INO + 1;
fs->sb.s_first_data_block = (BLOCKSIZE == 1024);
fs->sb.s_log_block_size = BLOCKSIZE >> 11;
- allocate(fs->bbm, i);
- for(i = 1; i < EXT2_FIRST_INO; i++)
- allocate(fs->ibm, i);
--
-- // make root inode and directory
-- fs->itab[EXT2_ROOT_INO-1].i_mode = FM_IFDIR | FM_IRWXU | FM_IRWXG | FM_IRWXO;
-- fs->itab[EXT2_ROOT_INO-1].i_size = BLOCKSIZE;
-- fs->itab[EXT2_ROOT_INO-1].i_links_count = 2;
-+ gd = rndup(nbgroups*sizeof(groupdescriptor),BLOCKSIZE)/BLOCKSIZE;
-+ itbl = nbinodes_per_group*sizeof(inode)/BLOCKSIZE;
+ for(i = 0,bbmpos=2+gd,ibmpos=3+gd,itblpos =4+gd;
+ i<nbgroups;
+ i++, bbmpos += nbblocks_per_group,ibmpos += nbblocks_per_group,
+ itblpos += nbblocks_per_group) {
+
-+ fs->gd[i].bg_free_blocks_count = free_blocks_per_group;
-+ fs->gd[i].bg_free_inodes_count = nbinodes_per_group;
++ if(free_blocks > free_blocks_per_group) {
++ fs->gd[i].bg_free_blocks_count = free_blocks_per_group;
++ free_blocks -= free_blocks_per_group;
++ } else {
++ fs->gd[i].bg_free_blocks_count = free_blocks;
++ free_blocks = 0; // this is the last block group
++ }
++ if(i)
++ fs->gd[i].bg_free_inodes_count = nbinodes_per_group;
++ else
++ fs->gd[i].bg_free_inodes_count = nbinodes_per_group -
++ EXT2_FIRST_INO + 2;
+ fs->gd[i].bg_used_dirs_count = 0;
+ fs->gd[i].bg_block_bitmap = bbmpos;
+ fs->gd[i].bg_inode_bitmap = ibmpos;
+
+ /* Block bitmap */
+ bbm = get_blk(fs,fs->gd[i].bg_block_bitmap);
-+ //non-filesystem blocks.
-+ for(j=fs->sb.s_blocks_per_group + 1; j <= BLOCKSIZE * 8; j++)
++ //non-filesystem blocks
++ for(j = fs->gd[i].bg_free_blocks_count
++ + overhead_per_group + 1; j <= BLOCKSIZE * 8; j++)
+ allocate(bbm, j);
+ //system blocks
-+ for(j = 1; j <= 3+gd+itbl; j++)
++ for(j = 1; j <= overhead_per_group; j++)
+ allocate(bbm, j);
+
+ /* Inode bitmap */
+ //non-filesystem inodes
+ for(j = fs->sb.s_inodes_per_group+1; j <= BLOCKSIZE * 8; j++)
+ allocate(ibm, j);
++ //system inodes
++ if(i == 0)
++ for(j = 1; j < EXT2_FIRST_INO; j++)
++ allocate(ibm, j);
+ }
-+
-+ /* We have groups now. Add the root filesystem in group 0 */
-+ /* Also allocate the system inodes in group 0 and update */
-+ /* directory count and inode count for group 0 */
-+
-+ ibm = get_blk(fs,fs->gd[0].bg_inode_bitmap);
-+ for(j = 1; j < EXT2_FIRST_INO; j++) {
-+ allocate(ibm, j);
-+ fs->gd[0].bg_free_inodes_count--;
-+ }
+
+ // make root inode and directory
+- fs->itab[EXT2_ROOT_INO-1].i_mode = FM_IFDIR | FM_IRWXU | FM_IRWXG | FM_IRWXO;
+- fs->itab[EXT2_ROOT_INO-1].i_size = BLOCKSIZE;
+- fs->itab[EXT2_ROOT_INO-1].i_links_count = 2;
++ /* We have groups now. Add the root filesystem in group 0 */
++ /* Also increment the directory count for group 0 */
++ fs->gd[0].bg_free_inodes_count--;
+ fs->gd[0].bg_used_dirs_count = 1;
+ itab0 = (inode *)get_blk(fs,fs->gd[0].bg_inode_table);
-+ itab0[EXT2_ROOT_INO-1].i_mode = FM_IFDIR | FM_IRWXU | FM_IRWXG | FM_IRWXO;
++ itab0[EXT2_ROOT_INO-1].i_mode = FM_IFDIR | FM_IRWXU | FM_IRGRP | FM_IROTH | FM_IXGRP | FM_IXOTH;
+ itab0[EXT2_ROOT_INO-1].i_size = BLOCKSIZE;
+ itab0[EXT2_ROOT_INO-1].i_links_count = 2;
+
b = get_workblk();
d = (directory*)b;
d->d_inode = EXT2_ROOT_INO;
-@@ -1147,9 +1522,14 @@
+@@ -1147,9 +1760,14 @@
// make lost+found directory and reserve blocks
if(fs->sb.s_r_blocks_count)
{
- nod = mkdir_fs(fs, EXT2_ROOT_INO, "lost+found", FM_IRWXU | FM_IRWXG | FM_IRWXO);
-+ nod = mkdir_fs(fs, EXT2_ROOT_INO, "lost+found", S_IRWXU|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH, 0, 0, time(NULL));
++ nod = mkdir_fs(fs, EXT2_ROOT_INO, "lost+found", FM_IRWXU, 0, 0, now, now);
memset(b, 0, BLOCKSIZE);
((directory*)b)->d_rec_len = BLOCKSIZE;
+ /* We run into problems with e2fsck if directory lost+found grows
+ * bigger than this. Need to find out why this happens - sundar
+ */
-+ if (fs->sb.s_r_blocks_count > 2049 )
-+ fs->sb.s_r_blocks_count=2049;
++ if (fs->sb.s_r_blocks_count > fs->sb.s_blocks_count * MAX_RESERVED_BLOCKS )
++ fs->sb.s_r_blocks_count = fs->sb.s_blocks_count * MAX_RESERVED_BLOCKS;
for(i = 1; i < fs->sb.s_r_blocks_count; i++)
extend_blk(fs, nod, b, 1);
get_nod(fs, nod)->i_size = fs->sb.s_r_blocks_count * BLOCKSIZE;
-@@ -1170,24 +1550,24 @@
+@@ -1168,36 +1786,34 @@
+ }
+
// loads a filesystem from disk
- filesystem * load_fs(FILE * fh, int swapit)
+-filesystem * load_fs(FILE * fh, int swapit)
++static filesystem * load_fs(FILE * fh, int swapit)
{
-- size_t fssize;
-+ size_t fssize = 0;
+ size_t fssize;
filesystem *fs;
if((fseek(fh, 0, SEEK_END) < 0) || ((fssize = ftell(fh)) < 0))
- pexit("input filesystem image");
- if(fssize > BLOCKS_PER_GROUP) // I build only one group
- errexit("too big filesystem");
+ error_msg_and_die("too small filesystem");
-+/* if(fssize > BLOCKS_PER_GROUP) // I build only one group
-+ error_msg_and_die("too big filesystem"); */
if(!(fs = (filesystem*)calloc(fssize, BLOCKSIZE)))
- errexit("not enough memory for filesystem");
+ error_msg_and_die("not enough memory for filesystem");
return fs;
}
-@@ -1230,9 +1610,9 @@
+-void free_fs(filesystem *fs)
++static void free_fs(filesystem *fs)
+ {
+ free(fs);
+ }
+
+ // just walk through blocks list
+-void flist_blocks(filesystem *fs, uint32 nod, FILE *fh)
++static void flist_blocks(filesystem *fs, uint32 nod, FILE *fh)
+ {
+ blockwalker bw;
+ uint32 bk;
+@@ -1208,7 +1824,7 @@
+ }
+
+ // walk through blocks list
+-void list_blocks(filesystem *fs, uint32 nod)
++static void list_blocks(filesystem *fs, uint32 nod)
+ {
+ int bn = 0;
+ blockwalker bw;
+@@ -1221,7 +1837,7 @@
+ }
+
+ // saves blocks to FILE*
+-void write_blocks(filesystem *fs, uint32 nod, FILE* f)
++static void write_blocks(filesystem *fs, uint32 nod, FILE* f)
+ {
+ blockwalker bw;
+ uint32 bk;
+@@ -1230,15 +1846,15 @@
while((bk = walk_bw(fs, nod, &bw, 0, 0)) != WALK_END)
{
if(fsize <= 0)
fsize -= BLOCKSIZE;
}
}
-@@ -1250,7 +1630,7 @@
+
+ // hexdumps blocks to a FILE*
+-void hexdump_blocks(filesystem *fs, uint32 nod, FILE* f)
++static void hexdump_blocks(filesystem *fs, uint32 nod, FILE* f)
+ {
+ blockwalker bw;
+ uint32 bk;
+@@ -1250,7 +1866,7 @@
{
int i, j;
if(fsize <= 0)
b = get_blk(fs, bk);
for(i = 0; i < 64; i++)
{
-@@ -1406,7 +1786,7 @@
+@@ -1273,7 +1889,7 @@
+ }
+
+ // print block/char device minor and major
+-void print_dev(filesystem *fs, uint32 nod)
++static void print_dev(filesystem *fs, uint32 nod)
+ {
+ int minor, major;
+ minor = ((uint8*)get_nod(fs, nod)->i_block)[0];
+@@ -1282,7 +1898,7 @@
+ }
+
+ // print an inode as a directory
+-void print_dir(filesystem *fs, uint32 nod)
++static void print_dir(filesystem *fs, uint32 nod)
+ {
+ blockwalker bw;
+ uint32 bk;
+@@ -1306,7 +1922,7 @@
+ }
+
+ // print a symbolic link
+-void print_link(filesystem *fs, uint32 nod)
++static void print_link(filesystem *fs, uint32 nod)
+ {
+ if(!get_nod(fs, nod)->i_blocks)
+ printf("links to '%s'\n", (char*)get_nod(fs, nod)->i_block);
+@@ -1319,7 +1935,7 @@
+ }
+
+ // make a ls-like printout of permissions
+-void make_perms(uint32 mode, char perms[11])
++static void make_perms(uint32 mode, char perms[11])
+ {
+ strcpy(perms, "----------");
+ if(mode & FM_IRUSR)
+@@ -1378,7 +1994,7 @@
+ }
+
+ // print an inode
+-void print_inode(filesystem *fs, uint32 nod)
++static void print_inode(filesystem *fs, uint32 nod)
+ {
+ char *s;
+ char perms[11];
+@@ -1406,7 +2022,7 @@
s = (nod >= EXT2_FIRST_INO) ? "normal" : "unknown reserved";
}
printf("inode %d (%s, %d links): ", nod, s, get_nod(fs, nod)->i_links_count);
{
printf("unallocated\n");
return;
-@@ -1440,24 +1820,46 @@
+@@ -1440,58 +2056,76 @@
default:
list_blocks(fs, nod);
}
}
// describes various fields in a filesystem
- void print_fs(filesystem *fs)
+-void print_fs(filesystem *fs)
++static void print_fs(filesystem *fs)
{
-- int i;
+ int i;
- printf("%d blocks (%d free, %d reserved), first data block: %d\n", fs->sb.s_blocks_count, fs->sb.s_free_blocks_count, fs->sb.s_r_blocks_count, fs->sb.s_first_data_block);
- printf("%d inodes (%d free)\n", fs->sb.s_inodes_count, fs->sb.s_free_inodes_count);
- printf("block size = %d, frag size = %d\n", fs->sb.s_log_block_size ? (fs->sb.s_log_block_size << 11) : 1024, fs->sb.s_log_frag_size ? (fs->sb.s_log_frag_size << 11) : 1024);
- for(i=1; i<=fs->sb.s_inodes_count; i++)
- if(allocated(fs->ibm, i))
- print_inode(fs, i);
-+ int i,j;
+ uint8 *ibm;
+
+ printf("%d blocks (%d free, %d reserved), first data block: %d\n",
+ printf("block size = %d, frag size = %d\n",
+ fs->sb.s_log_block_size ? (fs->sb.s_log_block_size << 11) : 1024,
+ fs->sb.s_log_frag_size ? (fs->sb.s_log_frag_size << 11) : 1024);
-+ printf("Number of groups: %d\n",GRP_NBGROUPS(fs));
++ printf("number of groups: %d\n",GRP_NBGROUPS(fs));
+ printf("%d blocks per group,%d frags per group,%d inodes per group\n",
+ fs->sb.s_blocks_per_group, fs->sb.s_frags_per_group,
+ fs->sb.s_inodes_per_group);
+ printf("Size of inode table: %d blocks\n",
+ fs->sb.s_inodes_per_group * sizeof(inode)/BLOCKSIZE);
+ for (i = 0; i < GRP_NBGROUPS(fs); i++) {
-+ printf("Group No: %d\n", i);
++ printf("Group No: %d\n", i+1);
+ printf("block bitmap: block %d,inode bitmap: block %d, inode table: block %d\n",
+ fs->gd[i].bg_block_bitmap, fs->gd[i].bg_inode_bitmap,
+ fs->gd[i].bg_inode_table);
-+ printf("Free blocks count: %d\n",fs->gd[i].bg_free_blocks_count);
-+ printf("Free inodes count: %d\n",fs->gd[i].bg_free_inodes_count);
-+ printf("Used dir count: %d\n",fs->gd[i].bg_used_dirs_count);
+ printf("block bitmap allocation:\n");
+ print_bm(GRP_GET_GROUP_BBM(fs, i),fs->sb.s_blocks_per_group);
+ printf("inode bitmap allocation:\n");
+ ibm = GRP_GET_GROUP_IBM(fs, i);
+ print_bm(ibm, fs->sb.s_inodes_per_group);
-+ for (j = 1; j <= fs->sb.s_inodes_per_group; j++)
-+ if (allocated(ibm, j))
-+ print_inode(fs, i*fs->sb.s_inodes_per_group + j);
++ for (i = 1; i <= fs->sb.s_inodes_per_group; i++)
++ if (allocated(ibm, i))
++ print_inode(fs, i);
+ }
}
- void dump_fs(filesystem *fs, FILE * fh, int swapit)
-@@ -1467,31 +1869,234 @@
+-void dump_fs(filesystem *fs, FILE * fh, int swapit)
++static void dump_fs(filesystem *fs, FILE * fh, int swapit)
+ {
+ int nbblocks = fs->sb.s_blocks_count;
+ fs->sb.s_reserved[200] = 0;
if(swapit)
swap_goodfs(fs);
if(fwrite(fs, BLOCKSIZE, nbblocks, fh) < nbblocks)
swap_badfs(fs);
}
-+/* device table entries take the form of:
-+ <path> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-+ /dev/mem c 640 0 0 1 1 0 0 -
-+
-+ type can be one of:
-+ f A regular file
-+ d Directory
-+ c Character special device file
-+ b Block special device file
-+ p Fifo (named pipe)
-+
-+ I don't bother with symlinks (permissions are irrelevant), hard
-+ links (special cases of regular files), or sockets (why bother).
-+
-+ Regular files must exist in the target root directory. If a char,
-+ block, fifo, or directory does not exist, it will be created.
-+*/
-+static int interpret_table_entry(filesystem *fs, char *line)
-+{
-+ char type, *name = NULL, *tmp, *dir, *bname;
-+ unsigned long mode = 0755, uid = 0, gid = 0, major = 0, minor = 0;
-+ unsigned long start = 0, increment = 1, count = 0;
-+ inode *entry;
-+ uint32 nod, parent;
-+
-+ if (sscanf (line, "%" SCANF_PREFIX "s %c %lo %lu %lu %lu %lu %lu %lu %lu",
-+ SCANF_STRING(name), &type, &mode, &uid, &gid, &major, &minor,
-+ &start, &increment, &count) < 0)
-+ {
-+ return 1;
-+ }
-+
-+ if (!strcmp(name, "/")) {
-+ error_msg_and_die("Device table entries require absolute paths");
-+ }
-+
-+ /* Check if this file already exists... */
-+ switch (type) {
-+ case 'd':
-+ mode |= S_IFDIR;
-+ break;
-+ case 'f':
-+ mode |= S_IFREG;
-+ break;
-+ case 'p':
-+ mode |= S_IFIFO;
-+ break;
-+ case 'c':
-+ mode |= S_IFCHR;
-+ break;
-+ case 'b':
-+ mode |= S_IFBLK;
-+ break;
-+ default:
-+ error_msg_and_die("Unsupported file type");
-+ }
-+ nod = 0;
-+ if (count==0)
-+ nod = find_path(fs, EXT2_ROOT_INO, name);
-+ if (nod) {
-+ /* Ok, we just need to fixup an existing entry
-+ * and we will be all done... */
-+ entry = get_nod(fs, nod);
-+ entry->i_uid = uid;
-+ entry->i_gid = gid;
-+ entry->i_mode = mode;
-+ if (major) {
-+ dev_t rdev = makedev(major, minor);
-+ ((uint8*)entry->i_block)[0] = (rdev & 0xff);
-+ ((uint8*)entry->i_block)[1] = (rdev >> 8);
-+ }
-+ } else {
-+ /* Try and find our parent now */
-+ tmp = xstrdup(name);
-+ dir = dirname(tmp);
-+ parent = find_path(fs, EXT2_ROOT_INO, dir);
-+ free(tmp);
-+ if (!parent) {
-+ error_msg ("skipping device_table entry '%s': no parent directory!", name);
-+ free(name);
-+ return 1;
-+ }
-+
-+ tmp = xstrdup(name);
-+ bname = xstrdup(basename(tmp));
-+ free(tmp);
-+ switch (type) {
-+ case 'd':
-+ mkdir_fs(fs, parent, bname, mode|FM_IFDIR, uid, gid, time(NULL));
-+ break;
-+ case 'f':
-+#if 0
-+ {
-+ // This is a bit odd.. This will try to include
-+ // the file of the same name from your _build_
-+ // system... Probably a very bad idea....
-+ struct stat st;
-+ FILE *fh = xfopen(name, "r");
-+ lstat(name, &st);
-+ mkfile_fs(fs, parent, bname, mode|FM_IFREG, st.st_size, fh, uid, gid, st.st_ctime);
-+ fclose(fh);
-+ }
-+#else
-+ error_msg("ignoring entry %s", name);
-+#endif
-+ break;
-+ case 'p':
-+ error_msg("ignoring entry %s", name);
-+ break;
-+ case 'c':
-+ case 'b':
-+ if (count > 0) {
-+ dev_t rdev;
-+ char *dname;
-+ unsigned long i;
-+ for (i = start; i < count; i++) {
-+ asprintf(&dname, "%s%lu", bname, i);
-+ nod = find_path(fs, EXT2_ROOT_INO, dname);
-+ if (nod) {
-+ /* We just need to fixup an existing entry */
-+ entry = get_nod(fs, nod);
-+ } else {
-+ nod = alloc_nod(fs);
-+ add2dir(fs, parent, nod, dname, mode, uid, gid, time(NULL));
-+ entry = get_nod(fs, nod);
-+ }
-+ entry->i_uid = uid;
-+ entry->i_gid = gid;
-+ entry->i_mode = mode;
-+ rdev = makedev(major, minor + (i * increment - start));
-+ ((uint8*)entry->i_block)[0] = (rdev & 0xff);
-+ ((uint8*)entry->i_block)[1] = (rdev >> 8);
-+ free(dname);
-+ }
-+ } else {
-+ dev_t rdev = makedev(major, minor);
-+ nod = alloc_nod(fs);
-+ add2dir(fs, parent, nod, bname, mode, uid, gid, time(NULL));
-+ entry = get_nod(fs, nod);
-+ ((uint8*)entry->i_block)[0] = (rdev & 0xff);
-+ ((uint8*)entry->i_block)[1] = (rdev >> 8);
-+ }
-+ break;
-+ default:
-+ error_msg_and_die("Unsupported file type");
-+ }
-+ free(bname);
-+ }
-+ free(name);
-+ return 0;
-+}
-+
-+static int parse_device_table(filesystem *root, FILE * file)
-+{
-+ char *line;
-+ int status = 0;
-+ size_t length = 0;
-+
-+ /* Turn off squash, since we must ensure that values
-+ * entered via the device table are not squashed */
-+ squash_uids = 0;
-+ squash_perms = 0;
-+
-+ /* Looks ok so far. The general plan now is to read in one
-+ * line at a time, check for leading comment delimiters ('#'),
-+ * then try and parse the line as a device table. If we fail
-+ * to parse things, try and help the poor fool to fix their
-+ * device table with a useful error msg... */
-+ line = NULL;
-+ while (getline(&line, &length, file) != -1) {
-+ /* First trim off any whitespace */
-+ int len = strlen(line);
-+
-+ /* trim trailing whitespace */
-+ while (len > 0 && isspace(line[len - 1]))
-+ line[--len] = '\0';
-+ /* trim leading whitespace */
-+ memmove(line, &line[strspn(line, " \n\r\t\v")], len);
-+
-+ /* How long are we after trimming? */
-+ len = strlen(line);
-+
-+ /* If this is NOT a comment line, try to interpret it */
-+ if (len && *line != '#') {
-+ if (interpret_table_entry(root, line))
-+ status = 1;
-+ }
-+
-+ free(line);
-+ line = NULL;
-+ }
-+ fclose(file);
-+
-+ return status;
-+}
-+
-+/*
-+Local Variables:
-+c-file-style: "linux"
-+c-basic-offset: 4
-+tab-width: 4
-+End:
-+*/
-+
- void showhelp(void)
+-void showhelp(void)
++static void showhelp(void)
{
fprintf(stderr, "Usage: %s [options] image\n"
"Create an ext2 filesystem image from directories/files\n\n"
- "crw- 10,190 /dev/lcd\n"
- "brw- 1,0 /dev/ram0\n\n"
- "Report bugs to xavier.bestel@free.fr\n", argv0);
-+ " -x image Use this image as a starting point\n"
++ " -x image Use this image as a starting point\n"
+ " -d directory Add this directory as source\n"
+ " -b blocks Size in blocks\n"
+ " -i inodes Number of inodes\n"
+ " -P Squash permissions on all files\n"
+ " -v Print resulting filesystem structure\n"
+ " -h Show this help\n\n"
-+ "Report bugs to xavier.bestel@free.fr\n", app_name);
++ "Report bugs to genext2fs-devel@lists.sourceforge.net\n", app_name);
}
#define MAX_DOPT 128
-@@ -1521,21 +2126,17 @@
+@@ -1507,6 +2141,8 @@
+ int nbblocks = -1;
+ int nbinodes = -1;
+ int nbresrvd = -1;
++ int tmp_nbblocks = -1;
++ int tmp_nbinodes = -1;
+ char * fsout = "-";
+ char * fsin = 0;
+ char * dopt[MAX_DOPT];
+@@ -1516,19 +2152,17 @@
+ int verbose = 0;
+ int holes = 0;
+ int emptyval = 0;
++ int squash_uids = 0;
++ int squash_perms = 0;
+ uint16 endian = 1;
+ int bigendian = !*(char*)&endian;
filesystem *fs;
int i;
int c;
-+ struct stat sb;
-+ FILE *devtable = NULL;
++ struct stats stats;
- argv0 = argv[0];
- if(argc <= 1)
switch(c)
{
case 'x':
- fsin = optarg;
+@@ -1536,6 +2170,7 @@
break;
case 'd':
-- case 'f':
+ case 'f':
++ case 'D':
dopt[didx++] = optarg;
break;
case 'b':
-@@ -1556,6 +2157,24 @@
+@@ -1556,6 +2191,16 @@
case 'z':
holes = 1;
break;
-+ case 'f':
-+ case 'D':
-+ devtable = xfopen(optarg, "r");
-+ if (fstat(fileno(devtable), &sb) < 0)
-+ perror_msg_and_die(optarg);
-+ if (sb.st_size < 10)
-+ error_msg_and_die("%s: not a proper device table file", optarg);
-+ break;
+ case 'q':
+ squash_uids = 1;
+ squash_perms = 1;
case 'v':
verbose = 1;
break;
-@@ -1566,16 +2185,14 @@
+@@ -1565,17 +2210,16 @@
+ default:
exit(1);
}
++
if(optind < (argc - 1))
- errexit("too many arguments");
+ error_msg_and_die("too many arguments");
fs = load_fs(fh, bigendian);
fclose(fh);
}
-@@ -1585,7 +2202,7 @@
+@@ -1584,12 +2228,55 @@
+ }
else
{
++ stats.ninodes = 0;
++ stats.nblocks = 0;
++ for(i = 0; i < didx; i++)
++ {
++ struct stat st;
++ FILE *fh;
++ char *pdir;
++ stat(dopt[i], &st);
++ switch(st.st_mode & S_IFMT)
++ {
++ case S_IFREG:
++ fh = xfopen(dopt[i], "r");
++ add2fs_from_file(fs, EXT2_ROOT_INO, fh, squash_uids, squash_perms, &stats);
++ fclose(fh);
++ break;
++ case S_IFDIR:
++ if(!(pdir = getcwd(0, GETCWD_SIZE)))
++ perror_msg_and_die(dopt[i]);
++ if(chdir(dopt[i]) < 0)
++ perror_msg_and_die(dopt[i]);
++ add2fs_from_dir(fs, EXT2_ROOT_INO, squash_uids, squash_perms, &stats);
++ if(chdir(pdir) < 0)
++ perror_msg_and_die(pdir);
++ free(pdir);
++ break;
++ default:
++ error_msg_and_die("%s in neither a file nor a directory", dopt[i]);
++ }
++ }
++
++ tmp_nbinodes = stats.ninodes + EXT2_FIRST_INO + 1;
++ tmp_nbblocks = stats.nblocks; // FIXME: should add space taken by inodes too
++
++ if(tmp_nbblocks > nbblocks)
++ {
++ printf("number of blocks too low, increasing to %d\n",tmp_nbblocks);
++ nbblocks = tmp_nbblocks;
++ }
++ if(tmp_nbinodes > nbinodes)
++ {
++ printf("number of inodes too low, increasing to %d\n",tmp_nbinodes);
++ nbinodes = tmp_nbinodes;
++ }
if(nbblocks == -1)
- errexit("filesystem size unspecified");
+ error_msg_and_die("filesystem size unspecified");
if(nbinodes == -1)
nbinodes = nbblocks * BLOCKSIZE / rndup(BYTES_PER_INODE, BLOCKSIZE);
if(nbresrvd == -1)
-@@ -1595,35 +2212,30 @@
+- nbresrvd = nbblocks * RESERVED_INODES;
++ nbresrvd = nbblocks * RESERVED_BLOCKS;
+ fs = init_fs(nbblocks, nbinodes, nbresrvd, holes);
+ }
for(i = 0; i < didx; i++)
- {
- struct stat st;
-- FILE *fh;
- char *pdir;
- stat(dopt[i], &st);
+@@ -1601,28 +2288,27 @@
switch(st.st_mode & S_IFMT)
{
-- case S_IFREG:
+ case S_IFREG:
- if(!(fh = fopen(dopt[i], "r")))
- pexit(dopt[i]);
- add2fs_from_file(fs, EXT2_ROOT_INO, fh);
-- fclose(fh);
-- break;
++ fh = xfopen(dopt[i], "r");
++ add2fs_from_file(fs, EXT2_ROOT_INO, fh, squash_uids, squash_perms, NULL);
+ fclose(fh);
+ break;
case S_IFDIR:
if(!(pdir = getcwd(0, GETCWD_SIZE)))
- pexit(dopt[i]);
+ perror_msg_and_die(dopt[i]);
if(chdir(dopt[i]) < 0)
- pexit(dopt[i]);
+- add2fs_from_dir(fs, EXT2_ROOT_INO);
+ perror_msg_and_die(dopt[i]);
- add2fs_from_dir(fs, EXT2_ROOT_INO);
++ add2fs_from_dir(fs, EXT2_ROOT_INO, squash_uids, squash_perms, NULL);
if(chdir(pdir) < 0)
- pexit(pdir);
+ perror_msg_and_die(pdir);
break;
default:
- errexit("%s in neither a file nor a directory", dopt[i]);
-+ error_msg_and_die("%s is neither a file nor a directory", dopt[i]);
++ error_msg_and_die("%s in neither a file nor a directory", dopt[i]);
}
}
if(emptyval)
- if(!allocated(fs->bbm, i))
+ if(!allocated(GRP_GET_BLOCK_BITMAP(fs,i),GRP_BBM_OFFSET(fs,i)))
memset(get_blk(fs, i), emptyval, BLOCKSIZE);
-+ if(devtable)
-+ parse_device_table(fs, devtable);
if(verbose)
print_fs(fs);
- for(i = 0; i < gidx; i++)
-@@ -1633,21 +2245,18 @@
+@@ -1633,25 +2319,23 @@
char *p;
FILE *fh;
if(!(nod = find_path(fs, EXT2_ROOT_INO, gopt[i])))
dump_fs(fs, fh, bigendian);
fclose(fh);
}
-diff -urN genext2fs-1.3.orig/test-mount.sh genext2fs-1.3/test-mount.sh
+ else
+ dump_fs(fs, stdout, bigendian);
++ free_fs(fs);
+ return 0;
+ }
+diff --exclude CVS -urN genext2fs-1.3.orig/install-sh genext2fs/install-sh
+--- genext2fs-1.3.orig/install-sh 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/install-sh 2004-12-27 13:03:47.000000000 -0700
+@@ -0,0 +1,325 @@
++#!/bin/sh
++# install - install a program, script, or datafile
++
++scriptversion=2004-04-01.17
++
++# This originates from X11R5 (mit/util/scripts/install.sh), which was
++# later released in X11R6 (xc/config/util/install.sh) with the
++# following copyright and license.
++#
++# Copyright (C) 1994 X Consortium
++#
++# Permission is hereby granted, free of charge, to any person obtaining a copy
++# of this software and associated documentation files (the "Software"), to
++# deal in the Software without restriction, including without limitation the
++# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
++# sell copies of the Software, and to permit persons to whom the Software is
++# furnished to do so, subject to the following conditions:
++#
++# The above copyright notice and this permission notice shall be included in
++# all copies or substantial portions of the Software.
++#
++# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
++# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
++# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
++# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++#
++# Except as contained in this notice, the name of the X Consortium shall not
++# be used in advertising or otherwise to promote the sale, use or other deal-
++# ings in this Software without prior written authorization from the X Consor-
++# tium.
++#
++#
++# FSF changes to this file are in the public domain.
++#
++# Calling this script install-sh is preferred over install.sh, to prevent
++# `make' implicit rules from creating a file called install from it
++# when there is no Makefile.
++#
++# This script is compatible with the BSD install script, but was written
++# from scratch. It can only install one file at a time, a restriction
++# shared with many OS's install programs.
++
++# set DOITPROG to echo to test this script
++
++# Don't use :- since 4.3BSD and earlier shells don't like it.
++doit="${DOITPROG-}"
++
++# put in absolute paths if you don't have them in your path; or use env. vars.
++
++mvprog="${MVPROG-mv}"
++cpprog="${CPPROG-cp}"
++chmodprog="${CHMODPROG-chmod}"
++chownprog="${CHOWNPROG-chown}"
++chgrpprog="${CHGRPPROG-chgrp}"
++stripprog="${STRIPPROG-strip}"
++rmprog="${RMPROG-rm}"
++mkdirprog="${MKDIRPROG-mkdir}"
++
++transformbasename=
++transform_arg=
++instcmd="$mvprog"
++chmodcmd="$chmodprog 0755"
++chowncmd=
++chgrpcmd=
++stripcmd=
++rmcmd="$rmprog -f"
++mvcmd="$mvprog"
++src=
++dst=
++dir_arg=
++
++usage="Usage: $0 [OPTION]... SRCFILE DSTFILE
++ or: $0 [OPTION]... SRCFILES... DIRECTORY
++ or: $0 -d DIRECTORIES...
++
++In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.
++In the second, create the directory path DIR.
++
++Options:
++-b=TRANSFORMBASENAME
++-c copy source (using $cpprog) instead of moving (using $mvprog).
++-d create directories instead of installing files.
++-g GROUP $chgrp installed files to GROUP.
++-m MODE $chmod installed files to MODE.
++-o USER $chown installed files to USER.
++-s strip installed files (using $stripprog).
++-t=TRANSFORM
++--help display this help and exit.
++--version display version info and exit.
++
++Environment variables override the default commands:
++ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
++"
++
++while test -n "$1"; do
++ case $1 in
++ -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
++ shift
++ continue;;
++
++ -c) instcmd=$cpprog
++ shift
++ continue;;
++
++ -d) dir_arg=true
++ shift
++ continue;;
++
++ -g) chgrpcmd="$chgrpprog $2"
++ shift
++ shift
++ continue;;
++
++ --help) echo "$usage"; exit 0;;
++
++ -m) chmodcmd="$chmodprog $2"
++ shift
++ shift
++ continue;;
++
++ -o) chowncmd="$chownprog $2"
++ shift
++ shift
++ continue;;
++
++ -s) stripcmd=$stripprog
++ shift
++ continue;;
++
++ -t=*) transformarg=`echo $1 | sed 's/-t=//'`
++ shift
++ continue;;
++
++ --version) echo "$0 $scriptversion"; exit 0;;
++
++ *) # When -d is used, all remaining arguments are directories to create.
++ test -n "$dir_arg" && break
++ # Otherwise, the last argument is the destination. Remove it from $@.
++ for arg
++ do
++ if test -n "$dstarg"; then
++ # $@ is not empty: it contains at least $arg.
++ set fnord "$@" "$dstarg"
++ shift # fnord
++ fi
++ shift # arg
++ dstarg=$arg
++ done
++ break;;
++ esac
++done
++
++if test -z "$1"; then
++ if test -z "$dir_arg"; then
++ echo "$0: no input file specified." >&2
++ exit 1
++ fi
++ # It's OK to call `install-sh -d' without argument.
++ # This can happen when creating conditional directories.
++ exit 0
++fi
++
++for src
++do
++ # Protect names starting with `-'.
++ case $src in
++ -*) src=./$src ;;
++ esac
++
++ if test -n "$dir_arg"; then
++ dst=$src
++ src=
++
++ if test -d "$dst"; then
++ instcmd=:
++ chmodcmd=
++ else
++ instcmd=$mkdirprog
++ fi
++ else
++ # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
++ # might cause directories to be created, which would be especially bad
++ # if $src (and thus $dsttmp) contains '*'.
++ if test ! -f "$src" && test ! -d "$src"; then
++ echo "$0: $src does not exist." >&2
++ exit 1
++ fi
++
++ if test -z "$dstarg"; then
++ echo "$0: no destination specified." >&2
++ exit 1
++ fi
++
++ dst=$dstarg
++ # Protect names starting with `-'.
++ case $dst in
++ -*) dst=./$dst ;;
++ esac
++
++ # If destination is a directory, append the input filename; won't work
++ # if double slashes aren't ignored.
++ if test -d "$dst"; then
++ dst=$dst/`basename "$src"`
++ fi
++ fi
++
++ # This sed command emulates the dirname command.
++ dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
++
++ # Make sure that the destination directory exists.
++
++ # Skip lots of stat calls in the usual case.
++ if test ! -d "$dstdir"; then
++ defaultIFS='
++ '
++ IFS="${IFS-$defaultIFS}"
++
++ oIFS=$IFS
++ # Some sh's can't handle IFS=/ for some reason.
++ IFS='%'
++ set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
++ IFS=$oIFS
++
++ pathcomp=
++
++ while test $# -ne 0 ; do
++ pathcomp=$pathcomp$1
++ shift
++ if test ! -d "$pathcomp"; then
++ $mkdirprog "$pathcomp" || lasterr=$?
++ # mkdir can fail with a `File exist' error in case several
++ # install-sh are creating the directory concurrently. This
++ # is OK.
++ test ! -d "$pathcomp" && { (exit ${lasterr-1}); exit; }
++ fi
++ pathcomp=$pathcomp/
++ done
++ fi
++
++ if test -n "$dir_arg"; then
++ $doit $instcmd "$dst" \
++ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
++ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
++ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
++ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
++
++ else
++ # If we're going to rename the final executable, determine the name now.
++ if test -z "$transformarg"; then
++ dstfile=`basename "$dst"`
++ else
++ dstfile=`basename "$dst" $transformbasename \
++ | sed $transformarg`$transformbasename
++ fi
++
++ # don't allow the sed command to completely eliminate the filename.
++ test -z "$dstfile" && dstfile=`basename "$dst"`
++
++ # Make a couple of temp file names in the proper directory.
++ dsttmp=$dstdir/_inst.$$_
++ rmtmp=$dstdir/_rm.$$_
++
++ # Trap to clean up those temp files at exit.
++ trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
++ trap '(exit $?); exit' 1 2 13 15
++
++ # Move or copy the file name to the temp name
++ $doit $instcmd "$src" "$dsttmp" &&
++
++ # and set any options; do chmod last to preserve setuid bits.
++ #
++ # If any of these fail, we abort the whole thing. If we want to
++ # ignore errors from any of these, just make sure not to ignore
++ # errors from the above "$doit $instcmd $src $dsttmp" command.
++ #
++ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
++ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
++ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
++ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
++
++ # Now rename the file to the real destination.
++ { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
++ || {
++ # The rename failed, perhaps because mv can't rename something else
++ # to itself, or perhaps because mv is so ancient that it does not
++ # support -f.
++
++ # Now remove or move aside any old file at destination location.
++ # We try this two ways since rm can't unlink itself on some
++ # systems and the destination file might be busy for other
++ # reasons. In this case, the final cleanup might fail but the new
++ # file should still install successfully.
++ {
++ if test -f "$dstdir/$dstfile"; then
++ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
++ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
++ || {
++ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
++ (exit 1); exit
++ }
++ else
++ :
++ fi
++ } &&
++
++ # Now rename the file to the real destination.
++ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
++ }
++ }
++ fi || { (exit 1); exit; }
++done
++
++# The final little trick to "correctly" pass the exit status to the exit trap.
++{
++ (exit 0); exit
++}
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-end: "$"
++# End:
+diff --exclude CVS -urN genext2fs-1.3.orig/missing genext2fs/missing
+--- genext2fs-1.3.orig/missing 1969-12-31 17:00:00.000000000 -0700
++++ genext2fs/missing 2004-12-27 13:03:47.000000000 -0700
+@@ -0,0 +1,360 @@
++#! /bin/sh
++# Common stub for a few missing GNU programs while installing.
++
++scriptversion=2003-09-02.23
++
++# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003
++# Free Software Foundation, Inc.
++# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# 02111-1307, USA.
++
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++if test $# -eq 0; then
++ echo 1>&2 "Try \`$0 --help' for more information"
++ exit 1
++fi
++
++run=:
++
++# In the cases where this matters, `missing' is being run in the
++# srcdir already.
++if test -f configure.ac; then
++ configure_ac=configure.ac
++else
++ configure_ac=configure.in
++fi
++
++msg="missing on your system"
++
++case "$1" in
++--run)
++ # Try to run requested program, and just exit if it succeeds.
++ run=
++ shift
++ "$@" && exit 0
++ # Exit code 63 means version mismatch. This often happens
++ # when the user try to use an ancient version of a tool on
++ # a file that requires a minimum version. In this case we
++ # we should proceed has if the program had been absent, or
++ # if --run hadn't been passed.
++ if test $? = 63; then
++ run=:
++ msg="probably too old"
++ fi
++ ;;
++esac
++
++# If it does not exist, or fails to run (possibly an outdated version),
++# try to emulate it.
++case "$1" in
++
++ -h|--h|--he|--hel|--help)
++ echo "\
++$0 [OPTION]... PROGRAM [ARGUMENT]...
++
++Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
++error status if there is no known handling for PROGRAM.
++
++Options:
++ -h, --help display this help and exit
++ -v, --version output version information and exit
++ --run try to run the given command, and emulate it if it fails
++
++Supported PROGRAM values:
++ aclocal touch file \`aclocal.m4'
++ autoconf touch file \`configure'
++ autoheader touch file \`config.h.in'
++ automake touch all \`Makefile.in' files
++ bison create \`y.tab.[ch]', if possible, from existing .[ch]
++ flex create \`lex.yy.c', if possible, from existing .c
++ help2man touch the output file
++ lex create \`lex.yy.c', if possible, from existing .c
++ makeinfo touch the output file
++ tar try tar, gnutar, gtar, then tar without non-portable flags
++ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
++
++Send bug reports to <bug-automake@gnu.org>."
++ ;;
++
++ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
++ echo "missing $scriptversion (GNU Automake)"
++ ;;
++
++ -*)
++ echo 1>&2 "$0: Unknown \`$1' option"
++ echo 1>&2 "Try \`$0 --help' for more information"
++ exit 1
++ ;;
++
++ aclocal*)
++ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
++ # We have it, but it failed.
++ exit 1
++ fi
++
++ echo 1>&2 "\
++WARNING: \`$1' is $msg. You should only need it if
++ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
++ to install the \`Automake' and \`Perl' packages. Grab them from
++ any GNU archive site."
++ touch aclocal.m4
++ ;;
++
++ autoconf)
++ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
++ # We have it, but it failed.
++ exit 1
++ fi
++
++ echo 1>&2 "\
++WARNING: \`$1' is $msg. You should only need it if
++ you modified \`${configure_ac}'. You might want to install the
++ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
++ archive site."
++ touch configure
++ ;;
++
++ autoheader)
++ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
++ # We have it, but it failed.
++ exit 1
++ fi
++
++ echo 1>&2 "\
++WARNING: \`$1' is $msg. You should only need it if
++ you modified \`acconfig.h' or \`${configure_ac}'. You might want
++ to install the \`Autoconf' and \`GNU m4' packages. Grab them
++ from any GNU archive site."
++ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
++ test -z "$files" && files="config.h"
++ touch_files=
++ for f in $files; do
++ case "$f" in
++ *:*) touch_files="$touch_files "`echo "$f" |
++ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
++ *) touch_files="$touch_files $f.in";;
++ esac
++ done
++ touch $touch_files
++ ;;
++
++ automake*)
++ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
++ # We have it, but it failed.
++ exit 1
++ fi
++
++ echo 1>&2 "\
++WARNING: \`$1' is $msg. You should only need it if
++ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
++ You might want to install the \`Automake' and \`Perl' packages.
++ Grab them from any GNU archive site."
++ find . -type f -name Makefile.am -print |
++ sed 's/\.am$/.in/' |
++ while read f; do touch "$f"; done
++ ;;
++
++ autom4te)
++ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
++ # We have it, but it failed.
++ exit 1
++ fi
++
++ echo 1>&2 "\
++WARNING: \`$1' is needed, but is $msg.
++ You might have modified some files without having the
++ proper tools for further handling them.
++ You can get \`$1' as part of \`Autoconf' from any GNU
++ archive site."
++
++ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
++ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
++ if test -f "$file"; then
++ touch $file
++ else
++ test -z "$file" || exec >$file
++ echo "#! /bin/sh"
++ echo "# Created by GNU Automake missing as a replacement of"
++ echo "# $ $@"
++ echo "exit 0"
++ chmod +x $file
++ exit 1
++ fi
++ ;;
++
++ bison|yacc)
++ echo 1>&2 "\
++WARNING: \`$1' $msg. You should only need it if
++ you modified a \`.y' file. You may need the \`Bison' package
++ in order for those modifications to take effect. You can get
++ \`Bison' from any GNU archive site."
++ rm -f y.tab.c y.tab.h
++ if [ $# -ne 1 ]; then
++ eval LASTARG="\${$#}"
++ case "$LASTARG" in
++ *.y)
++ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
++ if [ -f "$SRCFILE" ]; then
++ cp "$SRCFILE" y.tab.c
++ fi
++ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
++ if [ -f "$SRCFILE" ]; then
++ cp "$SRCFILE" y.tab.h
++ fi
++ ;;
++ esac
++ fi
++ if [ ! -f y.tab.h ]; then
++ echo >y.tab.h
++ fi
++ if [ ! -f y.tab.c ]; then
++ echo 'main() { return 0; }' >y.tab.c
++ fi
++ ;;
++
++ lex|flex)
++ echo 1>&2 "\
++WARNING: \`$1' is $msg. You should only need it if
++ you modified a \`.l' file. You may need the \`Flex' package
++ in order for those modifications to take effect. You can get
++ \`Flex' from any GNU archive site."
++ rm -f lex.yy.c
++ if [ $# -ne 1 ]; then
++ eval LASTARG="\${$#}"
++ case "$LASTARG" in
++ *.l)
++ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
++ if [ -f "$SRCFILE" ]; then
++ cp "$SRCFILE" lex.yy.c
++ fi
++ ;;
++ esac
++ fi
++ if [ ! -f lex.yy.c ]; then
++ echo 'main() { return 0; }' >lex.yy.c
++ fi
++ ;;
++
++ help2man)
++ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
++ # We have it, but it failed.
++ exit 1
++ fi
++
++ echo 1>&2 "\
++WARNING: \`$1' is $msg. You should only need it if
++ you modified a dependency of a manual page. You may need the
++ \`Help2man' package in order for those modifications to take
++ effect. You can get \`Help2man' from any GNU archive site."
++
++ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
++ if test -z "$file"; then
++ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
++ fi
++ if [ -f "$file" ]; then
++ touch $file
++ else
++ test -z "$file" || exec >$file
++ echo ".ab help2man is required to generate this page"
++ exit 1
++ fi
++ ;;
++
++ makeinfo)
++ if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
++ # We have makeinfo, but it failed.
++ exit 1
++ fi
++
++ echo 1>&2 "\
++WARNING: \`$1' is $msg. You should only need it if
++ you modified a \`.texi' or \`.texinfo' file, or any other file
++ indirectly affecting the aspect of the manual. The spurious
++ call might also be the consequence of using a buggy \`make' (AIX,
++ DU, IRIX). You might want to install the \`Texinfo' package or
++ the \`GNU make' package. Grab either from any GNU archive site."
++ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
++ if test -z "$file"; then
++ file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
++ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
++ fi
++ touch $file
++ ;;
++
++ tar)
++ shift
++ if test -n "$run"; then
++ echo 1>&2 "ERROR: \`tar' requires --run"
++ exit 1
++ fi
++
++ # We have already tried tar in the generic part.
++ # Look for gnutar/gtar before invocation to avoid ugly error
++ # messages.
++ if (gnutar --version > /dev/null 2>&1); then
++ gnutar "$@" && exit 0
++ fi
++ if (gtar --version > /dev/null 2>&1); then
++ gtar "$@" && exit 0
++ fi
++ firstarg="$1"
++ if shift; then
++ case "$firstarg" in
++ *o*)
++ firstarg=`echo "$firstarg" | sed s/o//`
++ tar "$firstarg" "$@" && exit 0
++ ;;
++ esac
++ case "$firstarg" in
++ *h*)
++ firstarg=`echo "$firstarg" | sed s/h//`
++ tar "$firstarg" "$@" && exit 0
++ ;;
++ esac
++ fi
++
++ echo 1>&2 "\
++WARNING: I can't seem to be able to run \`tar' with the given arguments.
++ You may want to install GNU tar or Free paxutils, or check the
++ command line arguments."
++ exit 1
++ ;;
++
++ *)
++ echo 1>&2 "\
++WARNING: \`$1' is needed, and is $msg.
++ You might have modified some files without having the
++ proper tools for further handling them. Check the \`README' file,
++ it often tells you about the needed prerequisites for installing
++ this package. You may also peek at any GNU archive site, in case
++ some other package would contain this missing \`$1' program."
++ exit 1
++ ;;
++esac
++
++exit 0
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-end: "$"
++# End:
+diff --exclude CVS -urN genext2fs-1.3.orig/test-mount.sh genext2fs/test-mount.sh
--- genext2fs-1.3.orig/test-mount.sh 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/test-mount.sh 2003-04-21 01:41:42.000000000 -0600
++++ genext2fs/test-mount.sh 2004-10-24 02:43:50.000000000 -0600
@@ -0,0 +1,96 @@
+#!/bin/sh
+set -e
+ftest dev.txt 4096
+
+exit 0
-diff -urN genext2fs-1.3.orig/test.sh genext2fs-1.3/test.sh
+diff --exclude CVS -urN genext2fs-1.3.orig/test.sh genext2fs/test.sh
--- genext2fs-1.3.orig/test.sh 1969-12-31 17:00:00.000000000 -0700
-+++ genext2fs-1.3/test.sh 2003-04-21 01:41:42.000000000 -0600
++++ genext2fs/test.sh 2004-10-24 02:43:50.000000000 -0600
@@ -0,0 +1,53 @@
+#!/bin/sh
+set -e
projects / buildroot.git / commitdiff