+2018-10-02 John Darrington <john@darrington.wattle.id.au>
+
+ * NEWS: Mention changed commands.
+ * ser-uds.c: New file.
+ * configure.ac (SER_HARDWIRE): Add ser-uds.o.
+ * configure: Regenerate.
+ * Makefile.in: Add new file.
+ * serial.c (serial_open): Check if filename is a socket
+ and lookup the appropriate interface accordingly.
+
2018-10-01 Alan Hayward <alan.hayward@arm.com>
* aarch64-linux-tdep.c (AARCH64_SIGCONTEXT_RESERVED_OFFSET): Add
ser-mingw.c \
ser-pipe.c \
ser-tcp.c \
+ ser-uds.c \
sh-nbsd-nat.c \
sh-nbsd-tdep.c \
sh-tdep.c \
* Changed commands
+target remote FILENAME
+target extended-remote FILENAME
+ If FILENAME is a Unix domain socket, GDB will attempt to connect
+ to this socket instead of opening FILENAME as a character device.
+
thread apply [all | COUNT | -COUNT] [FLAG]... COMMAND
The 'thread apply' command accepts new FLAG arguments.
FLAG arguments allow to control what output to produce and how to handle
*go32* ) SER_HARDWIRE=ser-go32.o ;;
*djgpp* ) SER_HARDWIRE=ser-go32.o ;;
*mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;;
+ *) SER_HARDWIRE="$SER_HARDWIRE ser-uds.o" ;;
esac
*go32* ) SER_HARDWIRE=ser-go32.o ;;
*djgpp* ) SER_HARDWIRE=ser-go32.o ;;
*mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;;
+ *) SER_HARDWIRE="$SER_HARDWIRE ser-uds.o" ;;
esac
AC_SUBST(SER_HARDWIRE)
+2018-10-02 John Darrington <john@darrington.wattle.id.au>
+
+ * gdb.texinfo (Remote Connection Commands): Describe
+ the changes to target remote and target extended-remote
+ relating to Unix domain sockets.
+
2018-10-01 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Configure Options): Document configure options.
@subsection Remote Connection Commands
@cindex remote connection commands
-@value{GDBN} can communicate with the target over a serial line, or
+@value{GDBN} can communicate with the target over a serial line, a
+local Unix domain socket, or
over an @acronym{IP} network using @acronym{TCP} or @acronym{UDP}. In
each case, @value{GDBN} uses the same protocol for debugging your
program; only the medium carrying the debugging packets varies. The
(@pxref{Remote Configuration, set serial baud}) before the
@code{target} command.
+@item target remote @var{local-socket}
+@itemx target extended-remote @var{local-socket}
+@cindex local socket, @code{target remote}
+@cindex Unix domain socket
+Use @var{local-socket} to communicate with the target. For example,
+to use a local Unix domain socket bound to the file system entry @file{/tmp/gdb-socket0}:
+
+@smallexample
+target remote /tmp/gdb-socket0
+@end smallexample
+
+Note that this command has the same form as the command to connect
+to a serial line. @value{GDBN} will automatically determine which
+kind of file you have specified and will make the appropriate kind
+of connection.
+This feature is not available if the host system does not support
+Unix domain sockets.
+
@item target remote @code{@var{host}:@var{port}}
@itemx target remote @code{@var{[host]}:@var{port}}
@itemx target remote @code{tcp:@var{host}:@var{port}}
--- /dev/null
+/* Serial interface for local domain connections on Un*x like systems.
+
+ Copyright (C) 1992-2018 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "defs.h"
+#include "serial.h"
+#include "ser-base.h"
+
+#include <sys/socket.h>
+#include <sys/un.h>
+
+#ifndef UNIX_PATH_MAX
+#define UNIX_PATH_MAX sizeof(((struct sockaddr_un *) NULL)->sun_path)
+#endif
+
+/* Open an AF_UNIX socket. */
+
+static int
+uds_open (struct serial *scb, const char *name)
+{
+ struct sockaddr_un addr;
+
+ if (strlen (name) > UNIX_PATH_MAX - 1)
+ {
+ warning
+ (_("The socket name is too long. It may be no longer than %s bytes."),
+ pulongest (UNIX_PATH_MAX - 1L));
+ return -1;
+ }
+
+ memset (&addr, 0, sizeof addr);
+ addr.sun_family = AF_UNIX;
+ strncpy (addr.sun_path, name, UNIX_PATH_MAX - 1);
+
+ int sock = socket (AF_UNIX, SOCK_STREAM, 0);
+
+ if (connect (sock, (struct sockaddr *) &addr,
+ sizeof (struct sockaddr_un)) < 0)
+ {
+ close (sock);
+ scb->fd = -1;
+ return -1;
+ }
+
+ scb->fd = sock;
+
+ return 0;
+}
+
+static void
+uds_close (struct serial *scb)
+{
+ if (scb->fd == -1)
+ return;
+
+ close (scb->fd);
+ scb->fd = -1;
+}
+
+static int
+uds_read_prim (struct serial *scb, size_t count)
+{
+ return recv (scb->fd, scb->buf, count, 0);
+}
+
+static int
+uds_write_prim (struct serial *scb, const void *buf, size_t count)
+{
+ return send (scb->fd, buf, count, 0);
+}
+
+/* The local socket ops. */
+
+static const struct serial_ops uds_ops =
+{
+ "local",
+ uds_open,
+ uds_close,
+ NULL,
+ ser_base_readchar,
+ ser_base_write,
+ ser_base_flush_output,
+ ser_base_flush_input,
+ ser_base_send_break,
+ ser_base_raw,
+ ser_base_get_tty_state,
+ ser_base_copy_tty_state,
+ ser_base_set_tty_state,
+ ser_base_print_tty_state,
+ ser_base_setbaudrate,
+ ser_base_setstopbits,
+ ser_base_setparity,
+ ser_base_drain_output,
+ ser_base_async,
+ uds_read_prim,
+ uds_write_prim
+};
+
+void
+_initialize_ser_socket (void)
+{
+ serial_add_interface (&uds_ops);
+}
else if (strchr (name, ':'))
ops = serial_interface_lookup ("tcp");
else
- ops = serial_interface_lookup ("hardwire");
+ {
+#ifndef USE_WIN32API
+ /* Check to see if name is a socket. If it is, then treat it
+ as such. Otherwise assume that it's a character device. */
+ struct stat sb;
+ if (stat (name, &sb) == 0 && (sb.st_mode & S_IFMT) == S_IFSOCK)
+ ops = serial_interface_lookup ("local");
+ else
+#endif
+ ops = serial_interface_lookup ("hardwire");
+ }
if (!ops)
return NULL;
projects / binutils-gdb.git / commitdiff