add Avnet Spartan6 LX9 Micrboard platform

diff --git a/mibuild/platforms/lx9_microboard.py b/mibuild/platforms/lx9_microboard.py
new file mode 100644 (file)
index 0000000..a4d1388
--- /dev/null
+++ b/mibuild/platforms/lx9_microboard.py
@@ -0,0 +1,115 @@
+from mibuild.generic_platform import *
+from mibuild.xilinx_ise import XilinxISEPlatform, CRG_SE
+
+_io = [
+               ("user_btn", 0, Pins("V4"), IOStandard("LVCMOS33"),
+                       Misc("PULLDOWN"), Misc("TIG")),
+
+               # TI CDCE913 programmable triple-output PLL
+               ("clk_y1", 0, Pins("V10"), IOStandard("LVCMOS33")), # default: 40 MHz
+               ("clk_y2", 0, Pins("K15"), IOStandard("LVCMOS33")), # default: 66 2/3 MHz
+               ("clk_y3", 0, Pins("C10"), IOStandard("LVCMOS33")), # default: 100 MHz
+
+               # Maxim DS1088LU oscillator, not populated
+               ("clk_backup", 0, Pins("R8"), IOStandard("LVCMOS33")),
+
+               # TI CDCE913 PLL I2C control
+               ("pll", 0,
+                       Subsignal("scl", Pins("P12")),
+                       Subsignal("sda", Pins("U13")),
+                       Misc("PULLUP"),
+                       IOStandard("LVCMOS33")),
+
+               # Micron N25Q128 SPI Flash
+               ("spiflash", 0,
+                       Subsignal("clk", Pins("R15")),
+                       Subsignal("cs_n", Pins("V3")),
+                       Subsignal("dq", Pins("T13 R13 T14 V14")),
+                       IOStandard("LVCMOS33")),
+
+               ("user_dip", 0, Pins("B3 A3 B4 A4"), Misc("PULLDOWN"),
+                               IOStandard("LVCMOS33")),
+
+               ("user_led", 0, Pins("P4 L6 F5 C2"), Misc("SLEW=QUIETIO"),
+                               IOStandard("LVCMOS18")),
+
+               # PMOD extension connectors
+               ("pmod", 0,
+                       Subsignal("d", Pins("F15 F16 C17 C18 F14 G14 D17 D18")),
+                       IOStandard("LVCMOS33")),
+               ("pmod", 1,
+                       Subsignal("d", Pins("H12 G13 E16 E18 K12 K13 F17 F18")),
+                       IOStandard("LVCMOS33")),
+
+               ("uart", 0,
+                       Subsignal("tx", Pins("T7"), Misc("SLEW=SLOW")),
+                       Subsignal("rx", Pins("R7"), Misc("PULLUP")),
+                       IOStandard("LVCMOS33")),
+
+               ("ddram_clock", 0,
+                       Subsignal("p", Pins("G3")),
+                       Subsignal("n", Pins("G1")),
+                       IOStandard("MOBILE_DDR")), # actually DIFF_
+
+               # Micron MT46H32M16LFBF-5 LPDDR
+               ("ddram", 0,
+                       Subsignal("a", Pins("J7 J6 H5 L7 F3 H4 H3 H6 "
+                               "D2 D1 F4 D3 G6")),
+                       Subsignal("ba", Pins("F2 F1")),
+                       Subsignal("dq", Pins("L2 L1 K2 K1 H2 H1 J3 J1 "
+                               "M3 M1 N2 N1 T2 T1 U2 U1")),
+                       Subsignal("cke", Pins("H7")),
+                       Subsignal("we_n", Pins("E3")),
+                       Subsignal("cs_n", Pins("K6")), # NC!
+                       Subsignal("cas_n", Pins("K5")),
+                       Subsignal("ras_n", Pins("L5")),
+                       Subsignal("dm", Pins("K3", "K4")),
+                       Subsignal("dqs", Pins("L4", "P2")),
+                       Subsignal("rzq", Pins("N4")),
+                       IOStandard("MOBILE_DDR")),
+
+               # Nat Semi DP83848J 10/100 Ethernet PHY
+               # pull-ups on rx_data set phy addr to 11110b
+               # and prevent isolate mode (addr 00000b)
+               ("eth_clocks", 0,
+                       Subsignal("rx", Pins("L15")),
+                       Subsignal("tx", Pins("H17")),
+                       IOStandard("LVCMOS33")),
+
+               ("eth", 0,
+                       Subsignal("col", Pins("M18"), Misc("PULLDOWN")),
+                       Subsignal("crs", Pins("N17"), Misc("PULLDOWN")),
+                       Subsignal("mdc", Pins("M16")),
+                       Subsignal("mdio", Pins("L18")),
+                       Subsignal("rst_n", Pins("T18"), Misc("TIG")),
+                       Subsignal("rx_data", Pins("T17 N16 N15 P18"), Misc("PULLUP")),
+                       Subsignal("dv", Pins("P17")),
+                       Subsignal("rx_er", Pins("N18")),
+                       Subsignal("tx_data", Pins("K18 K17 J18 J16")),
+                       Subsignal("tx_en", Pins("L17")),
+                       Subsignal("tx_er", Pins("L16")), # NC!
+                       IOStandard("LVCMOS33")),
+               ]
+
+
+class Platform(XilinxISEPlatform):
+       def __init__(self):
+               XilinxISEPlatform.__init__(self, "xc6slx9-2csg324", _io,
+                               lambda p: CRG_SE(p, "clk_y3", "user_btn", 10.))
+               self.add_platform_command("""
+CONFIG VCCAUX = "3.3";
+""")
+
+       def do_finalize(self, fragment):
+               try:
+                       eth_clocks = self.lookup_request("eth_clocks")
+                       self.add_platform_command("""
+NET "{phy_rx_clk}" TNM_NET = "GRPphy_rx_clk";
+NET "{phy_tx_clk}" TNM_NET = "GRPphy_tx_clk";
+TIMESPEC "TSphy_rx_clk" = PERIOD "GRPphy_rx_clk" 40 ns HIGH 50%;
+TIMESPEC "TSphy_tx_clk" = PERIOD "GRPphy_tx_clk" 40 ns HIGH 50%;
+TIMESPEC "TSphy_tx_clk_io" = FROM "GRPphy_tx_clk" TO "PADS" 10 ns;
+TIMESPEC "TSphy_rx_clk_io" = FROM "PADS" TO "GRPphy_rx_clk" 10 ns;
+""", phy_rx_clk=eth_clocks.rx, phy_tx_clk=eth_clocks.tx)
+               except ContraintError:
+                       pass