/** PC of this instruction. */
Addr PC;
+ /** Micro PC of this instruction. */
+ Addr microPC;
+
protected:
/** Next non-speculative PC. It is not filled in at fetch, but rather
* once the target of the branch is truly known (either decode or
/** Next non-speculative NPC. Target PC for Mips or Sparc. */
Addr nextNPC;
+ /** Next non-speculative micro PC. */
+ Addr nextMicroPC;
+
/** Predicted next PC. */
Addr predPC;
/** Predicted next NPC. */
Addr predNPC;
+ /** Predicted next microPC */
+ Addr predMicroPC;
+
/** If this is a branch that was predicted taken */
bool predTaken;
{
_flatDestRegIdx[idx] = flattened_dest;
}
+ /** BaseDynInst constructor given a binary instruction.
+ * @param staticInst A StaticInstPtr to the underlying instruction.
+ * @param PC The PC of the instruction.
+ * @param pred_PC The predicted next PC.
+ * @param pred_NPC The predicted next NPC.
+ * @param seq_num The sequence number of the instruction.
+ * @param cpu Pointer to the instruction's CPU.
+ */
+ BaseDynInst(StaticInstPtr staticInst, Addr PC, Addr NPC, Addr microPC,
+ Addr pred_PC, Addr pred_NPC, Addr pred_MicroPC,
+ InstSeqNum seq_num, ImplCPU *cpu);
/** BaseDynInst constructor given a binary instruction.
* @param inst The binary instruction.
* @param seq_num The sequence number of the instruction.
* @param cpu Pointer to the instruction's CPU.
*/
- BaseDynInst(TheISA::ExtMachInst inst, Addr PC, Addr NPC,
- Addr pred_PC, Addr pred_NPC,
+ BaseDynInst(TheISA::ExtMachInst inst, Addr PC, Addr NPC, Addr microPC,
+ Addr pred_PC, Addr pred_NPC, Addr pred_MicroPC,
InstSeqNum seq_num, ImplCPU *cpu);
/** BaseDynInst constructor given a StaticInst pointer.
#endif
}
+ Addr readNextMicroPC()
+ {
+ return nextMicroPC;
+ }
+
/** Set the predicted target of this current instruction. */
- void setPredTarg(Addr predicted_PC, Addr predicted_NPC)
+ void setPredTarg(Addr predicted_PC, Addr predicted_NPC,
+ Addr predicted_MicroPC)
{
predPC = predicted_PC;
predNPC = predicted_NPC;
+ predMicroPC = predicted_MicroPC;
}
/** Returns the predicted PC immediately after the branch. */
/** Returns the predicted PC two instructions after the branch */
Addr readPredNPC() { return predNPC; }
+ /** Returns the predicted micro PC after the branch */
+ Addr readPredMicroPC() { return predMicroPC; }
+
/** Returns whether the instruction was predicted taken or not. */
bool readPredTaken()
{
bool mispredicted()
{
return readPredPC() != readNextPC() ||
- readPredNPC() != readNextNPC();
+ readPredNPC() != readNextNPC() ||
+ readPredMicroPC() != readNextMicroPC();
}
//
bool isQuiesce() const { return staticInst->isQuiesce(); }
bool isIprAccess() const { return staticInst->isIprAccess(); }
bool isUnverifiable() const { return staticInst->isUnverifiable(); }
+ bool isMacroOp() const { return staticInst->isMacroOp(); }
+ bool isMicroOp() const { return staticInst->isMicroOp(); }
+ bool isDelayedCommit() const { return staticInst->isDelayedCommit(); }
+ bool isLastMicroOp() const { return staticInst->isLastMicroOp(); }
+ bool isFirstMicroOp() const { return staticInst->isFirstMicroOp(); }
+ bool isMicroBranch() const { return staticInst->isMicroBranch(); }
/** Temporarily sets this instruction as a serialize before instruction. */
void setSerializeBefore() { status.set(SerializeBefore); }
/** Read the PC of this instruction. */
const Addr readPC() const { return PC; }
+ /**Read the micro PC of this instruction. */
+ const Addr readMicroPC() const { return microPC; }
+
/** Set the next PC of this instruction (its actual target). */
- void setNextPC(uint64_t val)
+ void setNextPC(Addr val)
{
nextPC = val;
}
/** Set the next NPC of this instruction (the target in Mips or Sparc).*/
- void setNextNPC(uint64_t val)
+ void setNextNPC(Addr val)
{
#if ISA_HAS_DELAY_SLOT
nextNPC = val;
#endif
}
+ void setNextMicroPC(Addr val)
+ {
+ nextMicroPC = val;
+ }
+
/** Sets the ASID. */
void setASID(short addr_space_id) { asid = addr_space_id; }
#endif
template <class Impl>
-BaseDynInst<Impl>::BaseDynInst(TheISA::ExtMachInst machInst,
+BaseDynInst<Impl>::BaseDynInst(StaticInstPtr _staticInst,
Addr inst_PC, Addr inst_NPC,
+ Addr inst_MicroPC,
Addr pred_PC, Addr pred_NPC,
+ Addr pred_MicroPC,
InstSeqNum seq_num, ImplCPU *cpu)
- : staticInst(machInst), traceData(NULL), cpu(cpu)
+ : staticInst(_staticInst), traceData(NULL), cpu(cpu)
{
seqNum = seq_num;
+ bool nextIsMicro =
+ staticInst->isMicroOp() && !staticInst->isLastMicroOp();
+
PC = inst_PC;
- nextPC = inst_NPC;
- nextNPC = nextPC + sizeof(TheISA::MachInst);
+ microPC = inst_MicroPC;
+ if (nextIsMicro) {
+ nextPC = inst_PC;
+ nextNPC = inst_NPC;
+ nextMicroPC = microPC + 1;
+ } else {
+ nextPC = inst_NPC;
+ nextNPC = nextPC + sizeof(TheISA::MachInst);
+ nextMicroPC = 0;
+ }
+ predPC = pred_PC;
+ predNPC = pred_NPC;
+ predMicroPC = pred_MicroPC;
+ predTaken = false;
+
+ initVars();
+}
+
+template <class Impl>
+BaseDynInst<Impl>::BaseDynInst(TheISA::ExtMachInst inst,
+ Addr inst_PC, Addr inst_NPC,
+ Addr inst_MicroPC,
+ Addr pred_PC, Addr pred_NPC,
+ Addr pred_MicroPC,
+ InstSeqNum seq_num, ImplCPU *cpu)
+ : staticInst(inst), traceData(NULL), cpu(cpu)
+{
+ seqNum = seq_num;
+
+ bool nextIsMicro =
+ staticInst->isMicroOp() && !staticInst->isLastMicroOp();
+
+ PC = inst_PC;
+ microPC = inst_MicroPC;
+ if (nextIsMicro) {
+ nextPC = inst_PC;
+ nextNPC = inst_NPC;
+ nextMicroPC = microPC + 1;
+ } else {
+ nextPC = inst_NPC;
+ nextNPC = nextPC + sizeof(TheISA::MachInst);
+ nextMicroPC = 0;
+ }
predPC = pred_PC;
predNPC = pred_NPC;
+ predMicroPC = pred_MicroPC;
predTaken = false;
initVars();
bool squash[Impl::MaxThreads];
bool branchMispredict[Impl::MaxThreads];
bool branchTaken[Impl::MaxThreads];
- uint64_t mispredPC[Impl::MaxThreads];
- uint64_t nextPC[Impl::MaxThreads];
- uint64_t nextNPC[Impl::MaxThreads];
+ Addr mispredPC[Impl::MaxThreads];
+ Addr nextPC[Impl::MaxThreads];
+ Addr nextNPC[Impl::MaxThreads];
+ Addr nextMicroPC[Impl::MaxThreads];
InstSeqNum squashedSeqNum[Impl::MaxThreads];
bool includeSquashInst[Impl::MaxThreads];
// struct as it is used pretty frequently.
bool branchMispredict;
bool branchTaken;
- uint64_t mispredPC;
- uint64_t nextPC;
- uint64_t nextNPC;
+ Addr mispredPC;
+ Addr nextPC;
+ Addr nextNPC;
+ Addr nextMicroPC;
unsigned branchCount;
};
bool branchMispredict;
bool branchTaken;
- uint64_t mispredPC;
- uint64_t nextPC;
- uint64_t nextNPC;
+ Addr mispredPC;
+ Addr nextPC;
+ Addr nextNPC;
+ Addr nextMicroPC;
// Represents the instruction that has either been retired or
// squashed. Similar to having a single bus that broadcasts the
/** Returns the PC of the head instruction of the ROB.
* @todo: Probably remove this function as it returns only thread 0.
*/
- uint64_t readPC() { return PC[0]; }
+ Addr readPC() { return PC[0]; }
/** Returns the PC of a specific thread. */
- uint64_t readPC(unsigned tid) { return PC[tid]; }
+ Addr readPC(unsigned tid) { return PC[tid]; }
/** Sets the PC of a specific thread. */
- void setPC(uint64_t val, unsigned tid) { PC[tid] = val; }
+ void setPC(Addr val, unsigned tid) { PC[tid] = val; }
+
+ /** Reads the micro PC of a specific thread. */
+ Addr readMicroPC(unsigned tid) { return microPC[tid]; }
+
+ /** Sets the micro PC of a specific thread */
+ void setMicroPC(Addr val, unsigned tid) { microPC[tid] = val; }
/** Reads the next PC of a specific thread. */
- uint64_t readNextPC(unsigned tid) { return nextPC[tid]; }
+ Addr readNextPC(unsigned tid) { return nextPC[tid]; }
/** Sets the next PC of a specific thread. */
- void setNextPC(uint64_t val, unsigned tid) { nextPC[tid] = val; }
+ void setNextPC(Addr val, unsigned tid) { nextPC[tid] = val; }
/** Reads the next NPC of a specific thread. */
- uint64_t readNextNPC(unsigned tid) { return nextNPC[tid]; }
+ Addr readNextNPC(unsigned tid) { return nextNPC[tid]; }
/** Sets the next NPC of a specific thread. */
- void setNextNPC(uint64_t val, unsigned tid) { nextNPC[tid] = val; }
+ void setNextNPC(Addr val, unsigned tid) { nextNPC[tid] = val; }
+
+ /** Reads the micro PC of a specific thread. */
+ Addr readNextMicroPC(unsigned tid) { return nextMicroPC[tid]; }
+
+ /** Sets the micro PC of a specific thread */
+ void setNextMicroPC(Addr val, unsigned tid) { nextMicroPC[tid] = val; }
private:
/** Time buffer interface. */
*/
Addr PC[Impl::MaxThreads];
+ /** The commit micro PC of each thread. Refers to the instruction that
+ * is currently being processed/committed.
+ */
+ Addr microPC[Impl::MaxThreads];
+
/** The next PC of each thread. */
Addr nextPC[Impl::MaxThreads];
/** The next NPC of each thread. */
Addr nextNPC[Impl::MaxThreads];
+ /** The next micro PC of each thread. */
+ Addr nextMicroPC[Impl::MaxThreads];
+
/** The sequence number of the youngest valid instruction in the ROB. */
InstSeqNum youngestSeqNum[Impl::MaxThreads];
committedStores[i] = false;
trapSquash[i] = false;
tcSquash[i] = false;
- PC[i] = nextPC[i] = nextNPC[i] = 0;
+ microPC[i] = nextMicroPC[i] = PC[i] = nextPC[i] = nextNPC[i] = 0;
}
#if FULL_SYSTEM
interrupt = NoFault;
toIEW->commitInfo[tid].nextPC = PC[tid];
toIEW->commitInfo[tid].nextNPC = nextPC[tid];
+ toIEW->commitInfo[tid].nextMicroPC = nextMicroPC[tid];
}
template <class Impl>
toIEW->commitInfo[tid].nextPC = fromIEW->nextPC[tid];
toIEW->commitInfo[tid].nextNPC = fromIEW->nextNPC[tid];
+ toIEW->commitInfo[tid].nextMicroPC = fromIEW->nextMicroPC[tid];
toIEW->commitInfo[tid].mispredPC = fromIEW->mispredPC[tid];
PC[tid] = head_inst->readPC();
nextPC[tid] = head_inst->readNextPC();
nextNPC[tid] = head_inst->readNextNPC();
+ nextMicroPC[tid] = head_inst->readNextMicroPC();
// Increment the total number of non-speculative instructions
// executed.
}
PC[tid] = nextPC[tid];
-#if ISA_HAS_DELAY_SLOT
nextPC[tid] = nextNPC[tid];
nextNPC[tid] = nextNPC[tid] + sizeof(TheISA::MachInst);
-#else
- nextPC[tid] = nextPC[tid] + sizeof(TheISA::MachInst);
-#endif
+ microPC[tid] = nextMicroPC[tid];
+ nextMicroPC[tid] = microPC[tid] + 1;
#if FULL_SYSTEM
int count = 0;
// Squash Throughout Pipeline
InstSeqNum squash_seq_num = commit.rob->readHeadInst(tid)->seqNum;
- fetch.squash(0, sizeof(TheISA::MachInst), squash_seq_num, tid);
+ fetch.squash(0, sizeof(TheISA::MachInst), 0, squash_seq_num, tid);
decode.squash(tid);
rename.squash(squash_seq_num, tid);
iew.squash(tid);
commit.setPC(new_PC, tid);
}
+template <class Impl>
+uint64_t
+FullO3CPU<Impl>::readMicroPC(unsigned tid)
+{
+ return commit.readMicroPC(tid);
+}
+
+template <class Impl>
+void
+FullO3CPU<Impl>::setMicroPC(Addr new_PC,unsigned tid)
+{
+ commit.setMicroPC(new_PC, tid);
+}
+
template <class Impl>
uint64_t
FullO3CPU<Impl>::readNextPC(unsigned tid)
commit.setNextNPC(val, tid);
}
+template <class Impl>
+uint64_t
+FullO3CPU<Impl>::readNextMicroPC(unsigned tid)
+{
+ return commit.readNextMicroPC(tid);
+}
+
+template <class Impl>
+void
+FullO3CPU<Impl>::setNextMicroPC(Addr new_PC,unsigned tid)
+{
+ commit.setNextMicroPC(new_PC, tid);
+}
+
template <class Impl>
typename FullO3CPU<Impl>::ListIt
FullO3CPU<Impl>::addInst(DynInstPtr &inst)
void setArchFloatRegInt(int reg_idx, uint64_t val, unsigned tid);
/** Reads the commit PC of a specific thread. */
- uint64_t readPC(unsigned tid);
+ Addr readPC(unsigned tid);
/** Sets the commit PC of a specific thread. */
void setPC(Addr new_PC, unsigned tid);
+ /** Reads the commit micro PC of a specific thread. */
+ Addr readMicroPC(unsigned tid);
+
+ /** Sets the commmit micro PC of a specific thread. */
+ void setMicroPC(Addr new_microPC, unsigned tid);
+
/** Reads the next PC of a specific thread. */
- uint64_t readNextPC(unsigned tid);
+ Addr readNextPC(unsigned tid);
/** Sets the next PC of a specific thread. */
- void setNextPC(uint64_t val, unsigned tid);
+ void setNextPC(Addr val, unsigned tid);
/** Reads the next NPC of a specific thread. */
- uint64_t readNextNPC(unsigned tid);
+ Addr readNextNPC(unsigned tid);
/** Sets the next NPC of a specific thread. */
- void setNextNPC(uint64_t val, unsigned tid);
+ void setNextNPC(Addr val, unsigned tid);
+
+ /** Reads the commit next micro PC of a specific thread. */
+ Addr readNextMicroPC(unsigned tid);
+
+ /** Sets the commit next micro PC of a specific thread. */
+ void setNextMicroPC(Addr val, unsigned tid);
/** Function to add instruction onto the head of the list of the
* instructions. Used when new instructions are fetched.
///explicitly for ISAs with delay slots.
toFetch->decodeInfo[tid].nextNPC =
inst->branchTarget() + sizeof(TheISA::MachInst);
+ toFetch->decodeInfo[tid].nextMicroPC = inst->readMicroPC();
#if ISA_HAS_DELAY_SLOT
toFetch->decodeInfo[tid].branchTaken = inst->readNextNPC() !=
(inst->readNextPC() + sizeof(TheISA::MachInst));
// a check at the end
squash(inst, inst->threadNumber);
Addr target = inst->branchTarget();
- inst->setPredTarg(target, target + sizeof(TheISA::MachInst));
+ //The micro pc after an instruction level branch should be 0
+ inst->setPredTarg(target, target + sizeof(TheISA::MachInst), 0);
break;
}
}
* @param next_NPC Used for ISAs which use delay slots.
* @return Whether or not a branch was predicted as taken.
*/
- bool lookupAndUpdateNextPC(DynInstPtr &inst, Addr &next_PC, Addr &next_NPC);
+ bool lookupAndUpdateNextPC(DynInstPtr &inst, Addr &next_PC, Addr &next_NPC, Addr &next_MicroPC);
/**
* Fetches the cache line that contains fetch_PC. Returns any
bool fetchCacheLine(Addr fetch_PC, Fault &ret_fault, unsigned tid);
/** Squashes a specific thread and resets the PC. */
- inline void doSquash(const Addr &new_PC, const Addr &new_NPC, unsigned tid);
+ inline void doSquash(const Addr &new_PC, const Addr &new_NPC,
+ const Addr &new_MicroPC, unsigned tid);
/** Squashes a specific thread and resets the PC. Also tells the CPU to
* remove any instructions between fetch and decode that should be sqaushed.
*/
void squashFromDecode(const Addr &new_PC, const Addr &new_NPC,
+ const Addr &new_MicroPC,
const InstSeqNum &seq_num, unsigned tid);
/** Checks if a thread is stalled. */
* squash should be the commit stage.
*/
void squash(const Addr &new_PC, const Addr &new_NPC,
+ const Addr &new_MicroPC,
const InstSeqNum &seq_num, unsigned tid);
/** Ticks the fetch stage, processing all inputs signals and fetching
/** Per-thread fetch PC. */
Addr PC[Impl::MaxThreads];
+ /** Per-thread fetch micro PC. */
+ Addr microPC[Impl::MaxThreads];
+
/** Per-thread next PC. */
Addr nextPC[Impl::MaxThreads];
- /** Per-thread next Next PC.
- * This is not a real register but is used for
- * architectures that use a branch-delay slot.
- * (such as MIPS or Sparc)
- */
- Addr nextNPC[Impl::MaxThreads];
-
/** Memory request used to access cache. */
RequestPtr memReq[Impl::MaxThreads];
for (int tid = 0; tid < numThreads; tid++) {
PC[tid] = cpu->readPC(tid);
nextPC[tid] = cpu->readNextPC(tid);
- nextNPC[tid] = cpu->readNextNPC(tid);
+ microPC[tid] = cpu->readMicroPC(tid);
}
for (int tid=0; tid < numThreads; tid++) {
stalls[i].commit = 0;
PC[i] = cpu->readPC(i);
nextPC[i] = cpu->readNextPC(i);
-#if ISA_HAS_DELAY_SLOT
- nextNPC[i] = cpu->readNextNPC(i);
-#else
- nextNPC[i] = nextPC[i] + sizeof(TheISA::MachInst);
-#endif
+ microPC[i] = cpu->readMicroPC(i);
fetchStatus[i] = Running;
}
numInst = 0;
template <class Impl>
bool
DefaultFetch<Impl>::lookupAndUpdateNextPC(DynInstPtr &inst, Addr &next_PC,
- Addr &next_NPC)
+ Addr &next_NPC, Addr &next_MicroPC)
{
// Do branch prediction check here.
// A bit of a misnomer...next_PC is actually the current PC until
bool predict_taken;
if (!inst->isControl()) {
- next_PC = next_NPC;
- next_NPC = next_NPC + instSize;
- inst->setPredTarg(next_PC, next_NPC);
+ if (inst->isMicroOp() && !inst->isLastMicroOp()) {
+ next_MicroPC++;
+ } else {
+ next_PC = next_NPC;
+ next_NPC = next_NPC + instSize;
+ next_MicroPC = 0;
+ }
+ inst->setPredTarg(next_PC, next_NPC, next_MicroPC);
inst->setPredTaken(false);
return false;
}
+ //Assume for now that all control flow is to a different macroop which
+ //would reset the micro pc to 0.
+ next_MicroPC = 0;
+
int tid = inst->threadNumber;
Addr pred_PC = next_PC;
predict_taken = branchPred.predict(inst, pred_PC, tid);
#endif
/* DPRINTF(Fetch, "[tid:%i]: Branch predicted to go to %#x and then %#x.\n",
tid, next_PC, next_NPC);*/
- inst->setPredTarg(next_PC, next_NPC);
+ inst->setPredTarg(next_PC, next_NPC, next_MicroPC);
inst->setPredTaken(predict_taken);
++fetchedBranches;
template <class Impl>
inline void
DefaultFetch<Impl>::doSquash(const Addr &new_PC,
- const Addr &new_NPC, unsigned tid)
+ const Addr &new_NPC, const Addr &new_microPC, unsigned tid)
{
DPRINTF(Fetch, "[tid:%i]: Squashing, setting PC to: %#x, NPC to: %#x.\n",
tid, new_PC, new_NPC);
PC[tid] = new_PC;
nextPC[tid] = new_NPC;
- nextNPC[tid] = new_NPC + instSize;
+ microPC[tid] = new_microPC;
// Clear the icache miss if it's outstanding.
if (fetchStatus[tid] == IcacheWaitResponse) {
template<class Impl>
void
DefaultFetch<Impl>::squashFromDecode(const Addr &new_PC, const Addr &new_NPC,
- const InstSeqNum &seq_num,
- unsigned tid)
+ const Addr &new_MicroPC,
+ const InstSeqNum &seq_num, unsigned tid)
{
DPRINTF(Fetch, "[tid:%i]: Squashing from decode.\n",tid);
- doSquash(new_PC, new_NPC, tid);
+ doSquash(new_PC, new_NPC, new_MicroPC, tid);
// Tell the CPU to remove any instructions that are in flight between
// fetch and decode.
template <class Impl>
void
DefaultFetch<Impl>::squash(const Addr &new_PC, const Addr &new_NPC,
+ const Addr &new_MicroPC,
const InstSeqNum &seq_num, unsigned tid)
{
DPRINTF(Fetch, "[tid:%u]: Squash from commit.\n",tid);
- doSquash(new_PC, new_NPC, tid);
+ doSquash(new_PC, new_NPC, new_MicroPC, tid);
// Tell the CPU to remove any instructions that are not in the ROB.
cpu->removeInstsNotInROB(tid);
// In any case, squash.
squash(fromCommit->commitInfo[tid].nextPC,
fromCommit->commitInfo[tid].nextNPC,
+ fromCommit->commitInfo[tid].nextMicroPC,
fromCommit->commitInfo[tid].doneSeqNum,
tid);
// Squash unless we're already squashing
squashFromDecode(fromDecode->decodeInfo[tid].nextPC,
fromDecode->decodeInfo[tid].nextNPC,
+ fromDecode->decodeInfo[tid].nextMicroPC,
fromDecode->decodeInfo[tid].doneSeqNum,
tid);
DPRINTF(Fetch, "Attempting to fetch from [tid:%i]\n", tid);
// The current PC.
- Addr &fetch_PC = PC[tid];
-
- Addr &fetch_NPC = nextPC[tid];
+ Addr fetch_PC = PC[tid];
+ Addr fetch_NPC = nextPC[tid];
+ Addr fetch_MicroPC = microPC[tid];
// Fault code for memory access.
Fault fault = NoFault;
Addr next_PC = fetch_PC;
Addr next_NPC = fetch_NPC;
+ Addr next_MicroPC = fetch_MicroPC;
InstSeqNum inst_seq;
MachInst inst;
// @todo: Fix this hack.
unsigned offset = (fetch_PC & cacheBlkMask) & ~3;
+ StaticInstPtr staticInst = NULL;
+ StaticInstPtr macroop = NULL;
+
if (fault == NoFault) {
// If the read of the first instruction was successful, then grab the
// instructions from the rest of the cache line and put them into the
// Make sure this is a valid index.
assert(offset <= cacheBlkSize - instSize);
- // Get the instruction from the array of the cache line.
- inst = TheISA::gtoh(*reinterpret_cast<TheISA::MachInst *>
- (&cacheData[tid][offset]));
+ if (!macroop) {
+ // Get the instruction from the array of the cache line.
+ inst = TheISA::gtoh(*reinterpret_cast<TheISA::MachInst *>
+ (&cacheData[tid][offset]));
- predecoder.setTC(cpu->thread[tid]->getTC());
- predecoder.moreBytes(fetch_PC, 0, inst);
+ predecoder.setTC(cpu->thread[tid]->getTC());
+ predecoder.moreBytes(fetch_PC, 0, inst);
- ext_inst = predecoder.getExtMachInst();
+ ext_inst = predecoder.getExtMachInst();
+ staticInst = StaticInstPtr(ext_inst);
+ if (staticInst->isMacroOp())
+ macroop = staticInst;
+ }
+ if (macroop) {
+ staticInst = macroop->fetchMicroOp(fetch_MicroPC);
+ if (staticInst->isLastMicroOp())
+ macroop = NULL;
+ }
// Create a new DynInst from the instruction fetched.
- DynInstPtr instruction = new DynInst(ext_inst,
- fetch_PC, fetch_NPC,
- next_PC, next_NPC,
+ DynInstPtr instruction = new DynInst(staticInst,
+ fetch_PC, fetch_NPC, fetch_MicroPC,
+ next_PC, next_NPC, next_MicroPC,
inst_seq, cpu);
instruction->setTid(tid);
instruction->readPC());
///FIXME This needs to be more robust in dealing with delay slots
- lookupAndUpdateNextPC(instruction, next_PC, next_NPC);
+ lookupAndUpdateNextPC(instruction, next_PC, next_NPC, next_MicroPC);
predicted_branch |= (next_PC != fetch_NPC);
// Add instruction to the CPU's list of instructions.
// Move to the next instruction, unless we have a branch.
fetch_PC = next_PC;
fetch_NPC = next_NPC;
+ fetch_MicroPC = next_MicroPC;
if (instruction->isQuiesce()) {
DPRINTF(Fetch, "Quiesce instruction encountered, halting fetch!",
break;
}
- offset += instSize;
+ if (!macroop)
+ offset += instSize;
}
if (offset >= cacheBlkSize) {
if (fault == NoFault) {
PC[tid] = next_PC;
nextPC[tid] = next_NPC;
- nextNPC[tid] = next_NPC + instSize;
+ microPC[tid] = next_MicroPC;
DPRINTF(Fetch, "[tid:%i]: Setting PC to %08p.\n", tid, next_PC);
} else {
// We shouldn't be in an icache miss and also have a fault (an ITB
// We will use a nop in order to carry the fault.
ext_inst = TheISA::NoopMachInst;
+ StaticInstPtr staticInst = new StaticInst(ext_inst);
// Create a new DynInst from the dummy nop.
- DynInstPtr instruction = new DynInst(ext_inst,
+ DynInstPtr instruction = new DynInst(staticInst,
fetch_PC, fetch_NPC,
next_PC, next_NPC,
inst_seq, cpu);
#endif
toCommit->nextPC[tid] = inst->readNextPC();
toCommit->nextNPC[tid] = inst->readNextNPC();
+ toCommit->nextMicroPC[tid] = inst->readNextMicroPC();
toCommit->includeSquashInst[tid] = false;
// Floating point and Miscellaneous registers need their indexes
// adjusted to account for the expanded number of flattened int regs.
flat_src_reg = src_reg - TheISA::FP_Base_DepTag + TheISA::NumIntRegs;
+ DPRINTF(Rename, "Adjusting reg index from %d to %d.\n", src_reg, flat_src_reg);
}
inst->flattenSrcReg(src_idx, flat_src_reg);
// See if the register is ready or not.
if (scoreboard->getReg(renamed_reg) == true) {
- DPRINTF(Rename, "[tid:%u]: Register is ready.\n", tid);
+ DPRINTF(Rename, "[tid:%u]: Register %d is ready.\n", tid, renamed_reg);
inst->markSrcRegReady(src_idx);
+ } else {
+ DPRINTF(Rename, "[tid:%u]: Register %d is not ready.\n", tid, renamed_reg);
}
++renameRenameLookups;
// Floating point and Miscellaneous registers need their indexes
// adjusted to account for the expanded number of flattened int regs.
flat_dest_reg = dest_reg - TheISA::FP_Base_DepTag + TheISA::NumIntRegs;
+ DPRINTF(Rename, "Adjusting reg index from %d to %d.\n", dest_reg, flat_dest_reg);
}
inst->flattenDestReg(dest_idx, flat_dest_reg);
public:
/** BaseDynInst constructor given a binary instruction. */
- SparcDynInst(TheISA::ExtMachInst inst, Addr PC, Addr NPC,
- Addr Pred_PC, Addr Pred_NPC, InstSeqNum seq_num, O3CPU *cpu);
+ SparcDynInst(StaticInstPtr staticInst, Addr PC, Addr NPC, Addr microPC,
+ Addr Pred_PC, Addr Pred_NPC, Addr Pred_MicroPC,
+ InstSeqNum seq_num, O3CPU *cpu);
+
+ /** BaseDynInst constructor given a binary instruction. */
+ SparcDynInst(TheISA::ExtMachInst inst, Addr PC, Addr NPC, Addr microPC,
+ Addr Pred_PC, Addr Pred_NPC, Addr Pred_MicroPC,
+ InstSeqNum seq_num, O3CPU *cpu);
/** BaseDynInst constructor given a static inst pointer. */
SparcDynInst(StaticInstPtr &_staticInst);
#include "cpu/o3/sparc/dyn_inst.hh"
+template <class Impl>
+SparcDynInst<Impl>::SparcDynInst(StaticInstPtr staticInst,
+ Addr PC, Addr NPC, Addr microPC,
+ Addr Pred_PC, Addr Pred_NPC, Addr Pred_MicroPC,
+ InstSeqNum seq_num, O3CPU *cpu)
+ : BaseDynInst<Impl>(staticInst, PC, NPC, microPC,
+ Pred_PC, Pred_NPC, Pred_MicroPC, seq_num, cpu)
+{
+ initVars();
+}
+
template <class Impl>
SparcDynInst<Impl>::SparcDynInst(TheISA::ExtMachInst inst,
- Addr PC, Addr NPC, Addr Pred_PC, Addr Pred_NPC,
+ Addr PC, Addr NPC, Addr microPC,
+ Addr Pred_PC, Addr Pred_NPC, Addr Pred_MicroPC,
InstSeqNum seq_num, O3CPU *cpu)
- : BaseDynInst<Impl>(inst, PC, NPC, Pred_PC, Pred_NPC, seq_num, cpu)
+ : BaseDynInst<Impl>(inst, PC, NPC, microPC,
+ Pred_PC, Pred_NPC, Pred_MicroPC, seq_num, cpu)
{
initVars();
}
projects / gem5.git / commitdiff