of the usual sections are found.
* elf-m10300.c (_bfd_mn10300_elf_size_dynamic_sections): Tidy.
Strip .dynbss if it is zero size.
* elf32-arm.c (elf32_arm_size_dynamic_sections): Likewise.
* elf32-cris.c (elf_cris_size_dynamic_sections): Likewise.
* elf32-hppa.c (elf32_hppa_size_dynamic_sections): Likewise.
* elf32-i370.c (i370_elf_size_dynamic_sections): Likewise, and
.dynsbss.
(i370_elf_finish_dynamic_sections): Don't attempt to write .got
when it is zero size.
* elf32-i386.c (elf_i386_size_dynamic_sections): Correct handling
of .dynbss and zero size sections.
* elf32-m32r.c (m32r_elf_size_dynamic_sections): Strip .dynbss if
it is zero size.
* elf32-m68k.c (elf_m68k_size_dynamic_sections): Tidy. Strip
.dynbss if zero size.
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Likewise, .dynsbss
too.
* elf32-s390.c (elf_s390_size_dynamic_sections): Likewise.
* elf32-sh.c (sh_elf_size_dynamic_sections): Likewise.
* elf32-vax.c (elf_vax_size_dynamic_sections): Likewise.
* elf32-xtensa.c (elf_xtensa_size_dynamic_sections): Tidy. Strip
.plt.* and .got.plt.* if zero size.
* elf64-alpha.c (elf64_alpha_size_dynamic_sections): Tidy. Strip
.got* and .dynbss if zero size.
* elf64-hppa.c (elf64_hppa_size_dynamic_sections): Tidy. Strip
* elf64-ppc.c (create_linkage_sections): Create branch lookup table
in .data.rel.ro.brlt or .rodata.brlt, and similarly for associated
reloc section.
(create_got_section): Always create new .got and .rela.got sections.
(ppc64_elf_size_dynamic_sections): Tidy. Strip .dynbss if zero size.
* elf64-s390.c (elf_s390_size_dynamic_sections): Likewise.
* elf64-sh64.c (sh64_elf64_size_dynamic_sections): Likewise.
* elf64-x86-64.c (elf64_x86_64_size_dynamic_sections): Handle
dynamic bss sections correctly.
* elfxx-mips.c (_bfd_mips_elf_size_dynamic_sections): Tidy.
* elfxx-sparc.c (_bfd_sparc_elf_size_dynamic_sections): Tidy. Strip
.dynbss if zero size.
+2005-07-08 Alan Modra <amodra@bigpond.net.au>
+
+ * elf-hppa.h (elf_hppa_final_link): Use gp val of zero when none
+ of the usual sections are found.
+ * elf-m10300.c (_bfd_mn10300_elf_size_dynamic_sections): Tidy.
+ Strip .dynbss if it is zero size.
+ * elf32-arm.c (elf32_arm_size_dynamic_sections): Likewise.
+ * elf32-cris.c (elf_cris_size_dynamic_sections): Likewise.
+ * elf32-hppa.c (elf32_hppa_size_dynamic_sections): Likewise.
+ * elf32-i370.c (i370_elf_size_dynamic_sections): Likewise, and
+ .dynsbss.
+ (i370_elf_finish_dynamic_sections): Don't attempt to write .got
+ when it is zero size.
+ * elf32-i386.c (elf_i386_size_dynamic_sections): Correct handling
+ of .dynbss and zero size sections.
+ * elf32-m32r.c (m32r_elf_size_dynamic_sections): Strip .dynbss if
+ it is zero size.
+ * elf32-m68k.c (elf_m68k_size_dynamic_sections): Tidy. Strip
+ .dynbss if zero size.
+ * elf32-ppc.c (ppc_elf_size_dynamic_sections): Likewise, .dynsbss
+ too.
+ * elf32-s390.c (elf_s390_size_dynamic_sections): Likewise.
+ * elf32-sh.c (sh_elf_size_dynamic_sections): Likewise.
+ * elf32-vax.c (elf_vax_size_dynamic_sections): Likewise.
+ * elf32-xtensa.c (elf_xtensa_size_dynamic_sections): Tidy. Strip
+ .plt.* and .got.plt.* if zero size.
+ * elf64-alpha.c (elf64_alpha_size_dynamic_sections): Tidy. Strip
+ .got* and .dynbss if zero size.
+ * elf64-hppa.c (elf64_hppa_size_dynamic_sections): Tidy. Strip
+ * elf64-ppc.c (create_linkage_sections): Create branch lookup table
+ in .data.rel.ro.brlt or .rodata.brlt, and similarly for associated
+ reloc section.
+ (create_got_section): Always create new .got and .rela.got sections.
+ (ppc64_elf_size_dynamic_sections): Tidy. Strip .dynbss if zero size.
+ * elf64-s390.c (elf_s390_size_dynamic_sections): Likewise.
+ * elf64-sh64.c (sh64_elf64_size_dynamic_sections): Likewise.
+ * elf64-x86-64.c (elf64_x86_64_size_dynamic_sections): Handle
+ dynamic bss sections correctly.
+ * elfxx-mips.c (_bfd_mips_elf_size_dynamic_sections): Tidy.
+ * elfxx-sparc.c (_bfd_sparc_elf_size_dynamic_sections): Tidy. Strip
+ .dynbss if zero size.
+
2005-07-08 Ben Elliston <bje@au.ibm.com>
* elf32-xtensa.c: Include <stdarg.h> unconditionally, not only
2005-06-27 Carlos O'Donell <carlos@systemhalted.org>
- * bfd/elf32-hppa.c (struct elf32_hppa_stub_hash_entry):
+ * bfd/elf32-hppa.c (struct elf32_hppa_stub_hash_entry):
Use bh_root, and hh.
(struct elf32_hppa_link_hash_entry): Use eh, and hsh_cache.
(struct elf32_hppa_dyn_reloc_entry): Use hdh_next.
if (!sec || (sec->flags & SEC_EXCLUDE))
sec = bfd_get_section_by_name (abfd, ".data");
if (!sec || (sec->flags & SEC_EXCLUDE))
- return FALSE;
-
- gp_val = sec->output_offset + sec->output_section->vma;
+ gp_val = 0;
+ else
+ gp_val = sec->output_offset + sec->output_section->vma;
}
}
for (s = dynobj->sections; s != NULL; s = s->next)
{
const char * name;
- bfd_boolean strip;
if ((s->flags & SEC_LINKER_CREATED) == 0)
continue;
of the dynobj section names depend upon the input files. */
name = bfd_get_section_name (dynobj, s);
- strip = FALSE;
-
if (strcmp (name, ".plt") == 0)
{
- if (s->size == 0)
- /* Strip this section if we don't need it; see the
- comment below. */
- strip = TRUE;
- else
- /* Remember whether there is a PLT. */
- plt = TRUE;
+ /* Remember whether there is a PLT. */
+ plt = s->size != 0;
}
else if (strncmp (name, ".rela", 5) == 0)
{
- if (s->size == 0)
- {
- /* If we don't need this section, strip it from the
- output file. This is mostly to handle .rela.bss and
- .rela.plt. We must create both sections in
- create_dynamic_sections, because they must be created
- before the linker maps input sections to output
- sections. The linker does that before
- adjust_dynamic_symbol is called, and it is that
- function which decides whether anything needs to go
- into these sections. */
- strip = TRUE;
- }
- else
+ if (s->size != 0)
{
asection * target;
s->reloc_count = 0;
}
}
- else if (strncmp (name, ".got", 4) != 0)
+ else if (strncmp (name, ".got", 4) != 0
+ && strcmp (name, ".dynbss") != 0)
/* It's not one of our sections, so don't allocate space. */
continue;
- if (strip)
+ if (s->size == 0)
{
+ /* If we don't need this section, strip it from the
+ output file. This is mostly to handle .rela.bss and
+ .rela.plt. We must create both sections in
+ create_dynamic_sections, because they must be created
+ before the linker maps input sections to output
+ sections. The linker does that before
+ adjust_dynamic_symbol is called, and it is that
+ function which decides whether anything needs to go
+ into these sections. */
s->flags |= SEC_EXCLUDE;
continue;
}
+ if ((s->flags & SEC_HAS_CONTENTS) == 0)
+ continue;
+
/* Allocate memory for the section contents. We use bfd_zalloc
here in case unused entries are not reclaimed before the
section's contents are written out. This should not happen,
but this way if it does, we get a R_MN10300_NONE reloc
instead of garbage. */
s->contents = (bfd_byte *) bfd_zalloc (dynobj, s->size);
- if (s->contents == NULL && s->size != 0)
+ if (s->contents == NULL)
return FALSE;
}
for (s = dynobj->sections; s != NULL; s = s->next)
{
const char * name;
- bfd_boolean strip;
if ((s->flags & SEC_LINKER_CREATED) == 0)
continue;
of the dynobj section names depend upon the input files. */
name = bfd_get_section_name (dynobj, s);
- strip = FALSE;
-
if (strcmp (name, ".plt") == 0)
{
- if (s->size == 0)
- {
- /* Strip this section if we don't need it; see the
- comment below. */
- strip = TRUE;
- }
- else
- {
- /* Remember whether there is a PLT. */
- plt = TRUE;
- }
+ /* Remember whether there is a PLT. */
+ plt = s->size != 0;
}
else if (strncmp (name, ".rel", 4) == 0)
{
- if (s->size == 0)
- {
- /* If we don't need this section, strip it from the
- output file. This is mostly to handle .rel.bss and
- .rel.plt. We must create both sections in
- create_dynamic_sections, because they must be created
- before the linker maps input sections to output
- sections. The linker does that before
- adjust_dynamic_symbol is called, and it is that
- function which decides whether anything needs to go
- into these sections. */
- strip = TRUE;
- }
- else
+ if (s->size != 0)
{
/* Remember whether there are any reloc sections other
than .rel.plt. */
s->reloc_count = 0;
}
}
- else if (strncmp (name, ".got", 4) != 0)
+ else if (strncmp (name, ".got", 4) != 0
+ && strcmp (name, ".dynbss") != 0)
{
/* It's not one of our sections, so don't allocate space. */
continue;
}
- if (strip)
+ if (s->size == 0)
{
+ /* If we don't need this section, strip it from the
+ output file. This is mostly to handle .rel.bss and
+ .rel.plt. We must create both sections in
+ create_dynamic_sections, because they must be created
+ before the linker maps input sections to output
+ sections. The linker does that before
+ adjust_dynamic_symbol is called, and it is that
+ function which decides whether anything needs to go
+ into these sections. */
s->flags |= SEC_EXCLUDE;
continue;
}
+ if ((s->flags & SEC_HAS_CONTENTS) == 0)
+ continue;
+
/* Allocate memory for the section contents. */
s->contents = (bfd_byte *) bfd_zalloc (dynobj, s->size);
- if (s->contents == NULL && s->size != 0)
+ if (s->contents == NULL)
return FALSE;
}
for (s = dynobj->sections; s != NULL; s = s->next)
{
const char *name;
- bfd_boolean strip;
if ((s->flags & SEC_LINKER_CREATED) == 0)
continue;
of the dynobj section names depend upon the input files. */
name = bfd_get_section_name (dynobj, s);
- strip = FALSE;
-
if (strcmp (name, ".plt") == 0)
{
- if (s->size == 0)
- {
- /* Strip this section if we don't need it; see the
- comment below. */
- strip = TRUE;
- }
- else
- {
- /* Remember whether there is a PLT. */
- plt = TRUE;
- }
+ /* Remember whether there is a PLT. */
+ plt = s->size != 0;
}
else if (strncmp (name, ".rela", 5) == 0)
{
- if (s->size == 0)
- {
- /* If we don't need this section, strip it from the
- output file. This is mostly to handle .rela.bss and
- .rela.plt. We must create both sections in
- create_dynamic_sections, because they must be created
- before the linker maps input sections to output
- sections. The linker does that before
- adjust_dynamic_symbol is called, and it is that
- function which decides whether anything needs to go
- into these sections. */
- strip = TRUE;
- }
- else
+ if (s->size != 0)
{
/* Remember whether there are any reloc sections other
than .rela.plt. */
s->reloc_count = 0;
}
}
- else if (strncmp (name, ".got", 4) != 0)
+ else if (strncmp (name, ".got", 4) != 0
+ && strcmp (name, ".dynbss") != 0)
{
/* It's not one of our sections, so don't allocate space. */
continue;
}
- if (strip)
+ if (s->size == 0)
{
+ /* If we don't need this section, strip it from the
+ output file. This is mostly to handle .rela.bss and
+ .rela.plt. We must create both sections in
+ create_dynamic_sections, because they must be created
+ before the linker maps input sections to output
+ sections. The linker does that before
+ adjust_dynamic_symbol is called, and it is that
+ function which decides whether anything needs to go
+ into these sections. */
s->flags |= SEC_EXCLUDE;
continue;
}
+ if ((s->flags & SEC_HAS_CONTENTS) == 0)
+ continue;
+
/* Allocate memory for the section contents. We use bfd_zalloc here
in case unused entries are not reclaimed before the section's
contents are written out. This should not happen, but this way
if it does, we will not write out garbage. For reloc sections,
this will make entries have the type R_CRIS_NONE. */
s->contents = (bfd_byte *) bfd_zalloc (dynobj, s->size);
- if (s->contents == NULL && s->size != 0)
+ if (s->contents == NULL)
return FALSE;
}
sec->size = (sec->size + sizeof (plt_stub) + mask) & ~mask;
}
}
- else if (sec == htab->sgot)
+ else if (sec == htab->sgot
+ || sec == htab->sdynbss)
;
else if (strncmp (bfd_get_section_name (dynobj, sec), ".rela", 5) == 0)
{
continue;
}
+ if ((sec->flags & SEC_HAS_CONTENTS) == 0)
+ continue;
+
/* Allocate memory for the section contents. Zero it, because
we may not fill in all the reloc sections. */
sec->contents = bfd_zalloc (dynobj, sec->size);
- if (sec->contents == NULL && sec->size != 0)
+ if (sec->contents == NULL)
return FALSE;
}
for (s = dynobj->sections; s != NULL; s = s->next)
{
const char *name;
- bfd_boolean strip;
if ((s->flags & SEC_LINKER_CREATED) == 0)
continue;
/* It's OK to base decisions on the section name, because none
of the dynobj section names depend upon the input files. */
name = bfd_get_section_name (dynobj, s);
- strip = FALSE;
if (strcmp (name, ".plt") == 0)
{
- if (s->size == 0)
- /* Strip this section if we don't need it; see the
- comment below. */
- strip = TRUE;
- else
- /* Remember whether there is a PLT. */
- plt = TRUE;
+ /* Remember whether there is a PLT. */
+ plt = s->size != 0;
}
else if (strncmp (name, ".rela", 5) == 0)
{
- if (s->size == 0)
- /* If we don't need this section, strip it from the
- output file. This is mostly to handle .rela.bss and
- .rela.plt. We must create both sections in
- create_dynamic_sections, because they must be created
- before the linker maps input sections to output
- sections. The linker does that before
- adjust_dynamic_symbol is called, and it is that
- function which decides whether anything needs to go
- into these sections. */
- strip = TRUE;
- else
+ if (s->size != 0)
{
asection *target;
const char *outname;
}
else if (strcmp (name, ".got") != 0
&& strcmp (name, ".sdata") != 0
- && strcmp (name, ".sdata2") != 0)
- /* It's not one of our sections, so don't allocate space. */
- continue;
+ && strcmp (name, ".sdata2") != 0
+ && strcmp (name, ".dynbss") != 0
+ && strcmp (name, ".dynsbss") != 0)
+ {
+ /* It's not one of our sections, so don't allocate space. */
+ continue;
+ }
- if (strip)
+ if (s->size == 0)
{
- if (!bfd_section_removed_from_list (s->output_section->owner,
- s->output_section))
- {
- bfd_section_list_remove (s->output_section->owner,
- s->output_section);
- --s->output_section->owner->section_count;
- }
+ /* If we don't need this section, strip it from the
+ output file. This is mostly to handle .rela.bss and
+ .rela.plt. We must create both sections in
+ create_dynamic_sections, because they must be created
+ before the linker maps input sections to output
+ sections. The linker does that before
+ adjust_dynamic_symbol is called, and it is that
+ function which decides whether anything needs to go
+ into these sections. */
+ s->flags |= SEC_EXCLUDE;
continue;
}
+
+ if ((s->flags & SEC_HAS_CONTENTS) == 0)
+ continue;
+
/* Allocate memory for the section contents. */
s->contents = bfd_zalloc (dynobj, s->size);
- if (s->contents == NULL && s->size != 0)
+ if (s->contents == NULL)
return FALSE;
}
}
}
- if (sgot)
+ if (sgot && sgot->size != 0)
{
unsigned char *contents = sgot->contents;
continue;
}
- if (s->size == 0 && strip_section)
+ if (s->size == 0)
{
/* If we don't need this section, strip it from the
output file. This is mostly to handle .rel.bss and
adjust_dynamic_symbol is called, and it is that
function which decides whether anything needs to go
into these sections. */
-
- s->flags |= SEC_EXCLUDE;
+ if (strip_section)
+ s->flags |= SEC_EXCLUDE;
continue;
}
+ if ((s->flags & SEC_HAS_CONTENTS) == 0)
+ continue;
+
/* Allocate memory for the section contents. We use bfd_zalloc
here in case unused entries are not reclaimed before the
section's contents are written out. This should not happen,
if (s == htab->splt
|| s == htab->sgot
- || s == htab->sgotplt)
+ || s == htab->sgotplt
+ || s == htab->sdynbss)
{
/* Strip this section if we don't need it; see the
comment below. */
continue;
}
+ if ((s->flags & SEC_HAS_CONTENTS) == 0)
+ continue;
+
/* Allocate memory for the section contents. We use bfd_zalloc
here in case unused entries are not reclaimed before the
section's contents are written out. This should not happen,
for (s = dynobj->sections; s != NULL; s = s->next)
{
const char *name;
- bfd_boolean strip;
if ((s->flags & SEC_LINKER_CREATED) == 0)
continue;
of the dynobj section names depend upon the input files. */
name = bfd_get_section_name (dynobj, s);
- strip = FALSE;
-
if (strcmp (name, ".plt") == 0)
{
- if (s->size == 0)
- {
- /* Strip this section if we don't need it; see the
- comment below. */
- strip = TRUE;
- }
- else
- {
- /* Remember whether there is a PLT. */
- plt = TRUE;
- }
+ /* Remember whether there is a PLT. */
+ plt = s->size != 0;
}
else if (strncmp (name, ".rela", 5) == 0)
{
- if (s->size == 0)
- {
- /* If we don't need this section, strip it from the
- output file. This is mostly to handle .rela.bss and
- .rela.plt. We must create both sections in
- create_dynamic_sections, because they must be created
- before the linker maps input sections to output
- sections. The linker does that before
- adjust_dynamic_symbol is called, and it is that
- function which decides whether anything needs to go
- into these sections. */
- strip = TRUE;
- }
- else
+ if (s->size != 0)
{
relocs = TRUE;
s->reloc_count = 0;
}
}
- else if (strncmp (name, ".got", 4) != 0)
+ else if (strncmp (name, ".got", 4) != 0
+ && strcmp (name, ".dynbss") != 0)
{
/* It's not one of our sections, so don't allocate space. */
continue;
}
- if (strip)
+ if (s->size == 0)
{
+ /* If we don't need this section, strip it from the
+ output file. This is mostly to handle .rela.bss and
+ .rela.plt. We must create both sections in
+ create_dynamic_sections, because they must be created
+ before the linker maps input sections to output
+ sections. The linker does that before
+ adjust_dynamic_symbol is called, and it is that
+ function which decides whether anything needs to go
+ into these sections. */
s->flags |= SEC_EXCLUDE;
continue;
}
+ if ((s->flags & SEC_HAS_CONTENTS) == 0)
+ continue;
+
/* Allocate memory for the section contents. */
/* FIXME: This should be a call to bfd_alloc not bfd_zalloc.
Unused entries should be reclaimed before the section's contents
order to prevent writing out garbage, we initialise the section's
contents to zero. */
s->contents = (bfd_byte *) bfd_zalloc (dynobj, s->size);
- if (s->contents == NULL && s->size != 0)
+ if (s->contents == NULL)
return FALSE;
}
|| s == htab->glink
|| s == htab->got
|| s == htab->sgotplt
- || s == htab->sbss)
+ || s == htab->sbss
+ || s == htab->dynbss
+ || s == htab->dynsbss)
{
/* We'd like to strip these sections if they aren't needed, but if
we've exported dynamic symbols from them we must leave them.
}
else if (strncmp (bfd_get_section_name (dynobj, s), ".rela", 5) == 0)
{
- if (s->size == 0)
- {
- /* If we don't need this section, strip it from the
- output file. This is mostly to handle .rela.bss and
- .rela.plt. We must create both sections in
- create_dynamic_sections, because they must be created
- before the linker maps input sections to output
- sections. The linker does that before
- adjust_dynamic_symbol is called, and it is that
- function which decides whether anything needs to go
- into these sections. */
- }
- else
+ if (s->size != 0)
{
/* Remember whether there are any relocation sections. */
relocs = TRUE;
if (s->size == 0 && strip_section)
{
+ /* If we don't need this section, strip it from the
+ output file. This is mostly to handle .rela.bss and
+ .rela.plt. We must create both sections in
+ create_dynamic_sections, because they must be created
+ before the linker maps input sections to output
+ sections. The linker does that before
+ adjust_dynamic_symbol is called, and it is that
+ function which decides whether anything needs to go
+ into these sections. */
s->flags |= SEC_EXCLUDE;
continue;
}
if (s == htab->splt
|| s == htab->sgot
- || s == htab->sgotplt)
+ || s == htab->sgotplt
+ || s == htab->sdynbss)
{
/* Strip this section if we don't need it; see the
comment below. */
continue;
}
+ if ((s->flags & SEC_HAS_CONTENTS) == 0)
+ continue;
+
/* Allocate memory for the section contents. We use bfd_zalloc
here in case unused entries are not reclaimed before the
section's contents are written out. This should not happen,
if (s == htab->splt
|| s == htab->sgot
- || s == htab->sgotplt)
+ || s == htab->sgotplt
+ || s == htab->sdynbss)
{
/* Strip this section if we don't need it; see the
comment below. */
continue;
}
+ if ((s->flags & SEC_HAS_CONTENTS) == 0)
+ continue;
+
/* Allocate memory for the section contents. We use bfd_zalloc
here in case unused entries are not reclaimed before the
section's contents are written out. This should not happen,
for (s = dynobj->sections; s != NULL; s = s->next)
{
const char *name;
- bfd_boolean strip;
if ((s->flags & SEC_LINKER_CREATED) == 0)
continue;
of the dynobj section names depend upon the input files. */
name = bfd_get_section_name (dynobj, s);
- strip = FALSE;
-
if (strcmp (name, ".plt") == 0)
{
- if (s->size == 0)
- {
- /* Strip this section if we don't need it; see the
- comment below. */
- strip = TRUE;
- }
- else
- {
- /* Remember whether there is a PLT. */
- plt = TRUE;
- }
+ /* Remember whether there is a PLT. */
+ plt = s->size != 0;
}
else if (strncmp (name, ".rela", 5) == 0)
{
- if (s->size == 0)
- {
- /* If we don't need this section, strip it from the
- output file. This is mostly to handle .rela.bss and
- .rela.plt. We must create both sections in
- create_dynamic_sections, because they must be created
- before the linker maps input sections to output
- sections. The linker does that before
- adjust_dynamic_symbol is called, and it is that
- function which decides whether anything needs to go
- into these sections. */
- strip = TRUE;
- }
- else
+ if (s->size != 0)
{
asection *target;
s->reloc_count = 0;
}
}
- else if (strncmp (name, ".got", 4) != 0)
+ else if (strncmp (name, ".got", 4) != 0
+ && strcmp (name, ".dynbss") != 0)
{
/* It's not one of our sections, so don't allocate space. */
continue;
}
- if (strip)
+ if (s->size == 0)
{
+ /* If we don't need this section, strip it from the
+ output file. This is mostly to handle .rela.bss and
+ .rela.plt. We must create both sections in
+ create_dynamic_sections, because they must be created
+ before the linker maps input sections to output
+ sections. The linker does that before
+ adjust_dynamic_symbol is called, and it is that
+ function which decides whether anything needs to go
+ into these sections. */
s->flags |= SEC_EXCLUDE;
continue;
}
+ if ((s->flags & SEC_HAS_CONTENTS) == 0)
+ continue;
+
/* Allocate memory for the section contents. */
s->contents = (bfd_byte *) bfd_alloc (dynobj, s->size);
- if (s->contents == NULL && s->size != 0)
+ if (s->contents == NULL)
return FALSE;
}
for (s = dynobj->sections; s != NULL; s = s->next)
{
const char *name;
- bfd_boolean strip;
if ((s->flags & SEC_LINKER_CREATED) == 0)
continue;
of the dynobj section names depend upon the input files. */
name = bfd_get_section_name (dynobj, s);
- strip = FALSE;
-
if (strncmp (name, ".rela", 5) == 0)
{
- if (strcmp (name, ".rela.plt") == 0)
- relplt = TRUE;
- else if (strcmp (name, ".rela.got") == 0)
- relgot = TRUE;
-
- /* We use the reloc_count field as a counter if we need
- to copy relocs into the output file. */
- s->reloc_count = 0;
- }
- else if (strncmp (name, ".plt.", 5) == 0
- || strncmp (name, ".got.plt.", 9) == 0)
- {
- if (s->size == 0)
+ if (s->size != 0)
{
- /* If we don't need this section, strip it from the output
- file. We must create the ".plt*" and ".got.plt*"
- sections in create_dynamic_sections and/or check_relocs
- based on a conservative estimate of the PLT relocation
- count, because the sections must be created before the
- linker maps input sections to output sections. The
- linker does that before size_dynamic_sections, where we
- compute the exact size of the PLT, so there may be more
- of these sections than are actually needed. */
- strip = TRUE;
+ if (strcmp (name, ".rela.plt") == 0)
+ relplt = TRUE;
+ else if (strcmp (name, ".rela.got") == 0)
+ relgot = TRUE;
+
+ /* We use the reloc_count field as a counter if we need
+ to copy relocs into the output file. */
+ s->reloc_count = 0;
}
}
- else if (strcmp (name, ".got") != 0
+ else if (strncmp (name, ".plt.", 5) != 0
+ && strncmp (name, ".got.plt.", 9) != 0
+ && strcmp (name, ".got") != 0
&& strcmp (name, ".plt") != 0
&& strcmp (name, ".got.plt") != 0
&& strcmp (name, ".xt.lit.plt") != 0
continue;
}
- if (strip)
- s->flags |= SEC_EXCLUDE;
- else
+ if (s->size == 0)
+ {
+ /* If we don't need this section, strip it from the output
+ file. We must create the ".plt*" and ".got.plt*"
+ sections in create_dynamic_sections and/or check_relocs
+ based on a conservative estimate of the PLT relocation
+ count, because the sections must be created before the
+ linker maps input sections to output sections. The
+ linker does that before size_dynamic_sections, where we
+ compute the exact size of the PLT, so there may be more
+ of these sections than are actually needed. */
+ s->flags |= SEC_EXCLUDE;
+ }
+ else if ((s->flags & SEC_HAS_CONTENTS) != 0)
{
/* Allocate memory for the section contents. */
s->contents = (bfd_byte *) bfd_zalloc (dynobj, s->size);
- if (s->contents == NULL && s->size != 0)
+ if (s->contents == NULL)
return FALSE;
}
}
for (s = dynobj->sections; s != NULL; s = s->next)
{
const char *name;
- bfd_boolean strip;
if (!(s->flags & SEC_LINKER_CREATED))
continue;
of the dynobj section names depend upon the input files. */
name = bfd_get_section_name (dynobj, s);
- /* If we don't need this section, strip it from the output file.
- This is to handle .rela.bss and .rela.plt. We must create it
- in create_dynamic_sections, because it must be created before
- the linker maps input sections to output sections. The
- linker does that before adjust_dynamic_symbol is called, and
- it is that function which decides whether anything needs to
- go into these sections. */
-
- strip = FALSE;
-
if (strncmp (name, ".rela", 5) == 0)
{
- strip = (s->size == 0);
-
- if (!strip)
+ if (s->size != 0)
{
- if (strcmp(name, ".rela.plt") == 0)
+ if (strcmp (name, ".rela.plt") == 0)
relplt = TRUE;
/* We use the reloc_count field as a counter if we need
s->reloc_count = 0;
}
}
- else if (strcmp (name, ".plt") != 0)
+ else if (strncmp (name, ".got", 4) != 0
+ && strcmp (name, ".plt") != 0
+ && strcmp (name, ".dynbss") != 0)
{
/* It's not one of our dynamic sections, so don't allocate space. */
continue;
}
- if (strip)
- s->flags |= SEC_EXCLUDE;
- else
+ if (s->size == 0)
+ {
+ /* If we don't need this section, strip it from the output file.
+ This is to handle .rela.bss and .rela.plt. We must create it
+ in create_dynamic_sections, because it must be created before
+ the linker maps input sections to output sections. The
+ linker does that before adjust_dynamic_symbol is called, and
+ it is that function which decides whether anything needs to
+ go into these sections. */
+ s->flags |= SEC_EXCLUDE;
+ }
+ else if ((s->flags & SEC_HAS_CONTENTS) != 0)
{
/* Allocate memory for the section contents. */
s->contents = (bfd_byte *) bfd_zalloc (dynobj, s->size);
- if (s->contents == NULL && s->size != 0)
+ if (s->contents == NULL)
return FALSE;
}
}
for (s = dynobj->sections; s != NULL; s = s->next)
{
const char *name;
- bfd_boolean strip;
if ((s->flags & SEC_LINKER_CREATED) == 0)
continue;
of the dynobj section names depend upon the input files. */
name = bfd_get_section_name (dynobj, s);
- strip = 0;
-
if (strcmp (name, ".plt") == 0)
{
- /* Strip this section if we don't need it; see the comment below. */
- if (s->size == 0)
- {
- strip = TRUE;
- }
- else
- {
- /* Remember whether there is a PLT. */
- plt = TRUE;
- }
- }
- else if (strcmp (name, ".dlt") == 0)
- {
- /* Strip this section if we don't need it; see the comment below. */
- if (s->size == 0)
- {
- strip = TRUE;
- }
+ /* Remember whether there is a PLT. */
+ plt = s->size != 0;
}
- else if (strcmp (name, ".opd") == 0)
+ else if (strcmp (name, ".opd") == 0
+ || strncmp (name, ".dlt", 4) == 0
+ || strcmp (name, ".stub") == 0
+ || strcmp (name, ".got") == 0)
{
/* Strip this section if we don't need it; see the comment below. */
- if (s->size == 0)
- {
- strip = TRUE;
- }
}
else if (strncmp (name, ".rela", 5) == 0)
{
- /* If we don't need this section, strip it from the output file.
- This is mostly to handle .rela.bss and .rela.plt. We must
- create both sections in create_dynamic_sections, because they
- must be created before the linker maps input sections to output
- sections. The linker does that before adjust_dynamic_symbol
- is called, and it is that function which decides whether
- anything needs to go into these sections. */
- if (s->size == 0)
- {
- /* If we don't need this section, strip it from the
- output file. This is mostly to handle .rela.bss and
- .rela.plt. We must create both sections in
- create_dynamic_sections, because they must be created
- before the linker maps input sections to output
- sections. The linker does that before
- adjust_dynamic_symbol is called, and it is that
- function which decides whether anything needs to go
- into these sections. */
- strip = TRUE;
- }
- else
+ if (s->size != 0)
{
asection *target;
s->reloc_count = 0;
}
}
- else if (strncmp (name, ".dlt", 4) != 0
- && strcmp (name, ".stub") != 0
- && strcmp (name, ".got") != 0)
+ else
{
/* It's not one of our sections, so don't allocate space. */
continue;
}
- if (strip)
+ if (s->size == 0)
{
+ /* If we don't need this section, strip it from the
+ output file. This is mostly to handle .rela.bss and
+ .rela.plt. We must create both sections in
+ create_dynamic_sections, because they must be created
+ before the linker maps input sections to output
+ sections. The linker does that before
+ adjust_dynamic_symbol is called, and it is that
+ function which decides whether anything needs to go
+ into these sections. */
s->flags |= SEC_EXCLUDE;
continue;
}
+ if ((s->flags & SEC_HAS_CONTENTS) == 0)
+ continue;
+
/* Allocate memory for the section contents if it has not
been allocated already. We use bfd_zalloc here in case
unused entries are not reclaimed before the section's
if (s->contents == NULL)
{
s->contents = (bfd_byte *) bfd_zalloc (dynobj, s->size);
- if (s->contents == NULL && s->size != 0)
+ if (s->contents == NULL)
return FALSE;
}
}
/* Base hash table entry structure. */
struct bfd_hash_entry root;
- /* Offset within .branch_lt. */
+ /* Offset within branch lookup table. */
unsigned int offset;
/* Generation marker. */
|| ! bfd_set_section_alignment (dynobj, htab->glink, 2))
return FALSE;
- /* Create .branch_lt for plt_branch stubs. */
- flags = (SEC_ALLOC | SEC_LOAD
- | SEC_HAS_CONTENTS | SEC_IN_MEMORY | SEC_LINKER_CREATED);
- htab->brlt = bfd_make_section_anyway_with_flags (dynobj, ".branch_lt",
- flags);
+ /* Create branch lookup table for plt_branch stubs. */
+ if (info->shared)
+ {
+ flags = (SEC_ALLOC | SEC_LOAD
+ | SEC_HAS_CONTENTS | SEC_IN_MEMORY | SEC_LINKER_CREATED);
+ htab->brlt
+ = bfd_make_section_anyway_with_flags (dynobj, ".data.rel.ro.brlt",
+ flags);
+ }
+ else
+ {
+ flags = (SEC_ALLOC | SEC_LOAD | SEC_READONLY
+ | SEC_HAS_CONTENTS | SEC_IN_MEMORY | SEC_LINKER_CREATED);
+ htab->brlt
+ = bfd_make_section_anyway_with_flags (dynobj, ".rodata.brlt", flags);
+ }
+
if (htab->brlt == NULL
|| ! bfd_set_section_alignment (dynobj, htab->brlt, 3))
return FALSE;
- if (info->shared || info->emitrelocations)
+ if (info->shared)
{
flags = (SEC_ALLOC | SEC_LOAD | SEC_READONLY
| SEC_HAS_CONTENTS | SEC_IN_MEMORY | SEC_LINKER_CREATED);
- htab->relbrlt = bfd_make_section_anyway_with_flags (dynobj,
- ".rela.branch_lt",
- flags);
- if (!htab->relbrlt
- || ! bfd_set_section_alignment (dynobj, htab->relbrlt, 3))
- return FALSE;
+ htab->relbrlt
+ = bfd_make_section_anyway_with_flags (dynobj, ".rela.data.rel.ro.brlt",
+ flags);
}
+ else if (info->emitrelocations)
+ {
+ flags = (SEC_ALLOC | SEC_LOAD | SEC_READONLY
+ | SEC_HAS_CONTENTS | SEC_IN_MEMORY | SEC_LINKER_CREATED);
+ htab->relbrlt
+ = bfd_make_section_anyway_with_flags (dynobj, ".rela.rodata.brlt",
+ flags);
+ }
+ else
+ return TRUE;
+
+ if (!htab->relbrlt
+ || ! bfd_set_section_alignment (dynobj, htab->relbrlt, 3))
+ return FALSE;
+
return TRUE;
}
flags = (SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS | SEC_IN_MEMORY
| SEC_LINKER_CREATED);
- got = bfd_make_section_with_flags (abfd, ".got", flags);
+ got = bfd_make_section_anyway_with_flags (abfd, ".got", flags);
if (!got
|| !bfd_set_section_alignment (abfd, got, 3))
return FALSE;
- relgot = bfd_make_section_with_flags (abfd, ".rela.got",
- flags | SEC_READONLY);
+ relgot = bfd_make_section_anyway_with_flags (abfd, ".rela.got",
+ flags | SEC_READONLY);
if (!relgot
|| ! bfd_set_section_alignment (abfd, relgot, 3))
return FALSE;
continue;
else if (s == htab->got
|| s == htab->plt
- || s == htab->glink)
+ || s == htab->glink
+ || s == htab->dynbss)
{
/* Strip this section if we don't need it; see the
comment below. */
}
else if (strncmp (bfd_get_section_name (dynobj, s), ".rela", 5) == 0)
{
- if (s->size == 0)
- {
- /* If we don't need this section, strip it from the
- output file. This is mostly to handle .rela.bss and
- .rela.plt. We must create both sections in
- create_dynamic_sections, because they must be created
- before the linker maps input sections to output
- sections. The linker does that before
- adjust_dynamic_symbol is called, and it is that
- function which decides whether anything needs to go
- into these sections. */
- }
- else
+ if (s->size != 0)
{
if (s != htab->relplt)
relocs = TRUE;
if (s->size == 0)
{
+ /* If we don't need this section, strip it from the
+ output file. This is mostly to handle .rela.bss and
+ .rela.plt. We must create both sections in
+ create_dynamic_sections, because they must be created
+ before the linker maps input sections to output
+ sections. The linker does that before
+ adjust_dynamic_symbol is called, and it is that
+ function which decides whether anything needs to go
+ into these sections. */
s->flags |= SEC_EXCLUDE;
continue;
}
- /* .plt is in the bss section. We don't initialise it. */
- if (s == htab->plt)
+ if ((s->flags & SEC_HAS_CONTENTS) == 0)
continue;
/* Allocate memory for the section contents. We use bfd_zalloc
(*htab->layout_sections_again) ();
}
- /* It would be nice to strip .branch_lt from the output if the
+ /* It would be nice to strip htab->brlt from the output if the
section is empty, but it's too late. If we strip sections here,
the dynamic symbol table is corrupted since the section symbol
for the stripped section isn't written. */
if (s == htab->splt
|| s == htab->sgot
- || s == htab->sgotplt)
+ || s == htab->sgotplt
+ || s == htab->sdynbss)
{
/* Strip this section if we don't need it; see the
comment below. */
continue;
}
+ if ((s->flags & SEC_HAS_CONTENTS) == 0)
+ continue;
+
/* Allocate memory for the section contents. We use bfd_zalloc
here in case unused entries are not reclaimed before the
section's contents are written out. This should not happen,
for (s = dynobj->sections; s != NULL; s = s->next)
{
const char *name;
- bfd_boolean strip;
if ((s->flags & SEC_LINKER_CREATED) == 0)
continue;
of the dynobj section names depend upon the input files. */
name = bfd_get_section_name (dynobj, s);
- strip = FALSE;
-
if (strcmp (name, ".plt") == 0)
{
- if (s->size == 0)
- {
- /* Strip this section if we don't need it; see the
- comment below. */
- strip = TRUE;
- }
- else
- {
- /* Remember whether there is a PLT. */
- plt = TRUE;
- }
+ /* Remember whether there is a PLT. */
+ plt = s->size != 0;
}
else if (strncmp (name, ".rela", 5) == 0)
{
- if (s->size == 0)
- {
- /* If we don't need this section, strip it from the
- output file. This is mostly to handle .rela.bss and
- .rela.plt. We must create both sections in
- create_dynamic_sections, because they must be created
- before the linker maps input sections to output
- sections. The linker does that before
- adjust_dynamic_symbol is called, and it is that
- function which decides whether anything needs to go
- into these sections. */
- strip = TRUE;
- }
- else
+ if (s->size != 0)
{
asection *target;
s->reloc_count = 0;
}
}
- else if (strncmp (name, ".got", 4) != 0)
+ else if (strncmp (name, ".got", 4) != 0
+ && strcmp (name, ".dynbss") != 0)
{
/* It's not one of our sections, so don't allocate space. */
continue;
}
- if (strip)
+ if (s->size == 0)
{
+ /* If we don't need this section, strip it from the
+ output file. This is mostly to handle .rela.bss and
+ .rela.plt. We must create both sections in
+ create_dynamic_sections, because they must be created
+ before the linker maps input sections to output
+ sections. The linker does that before
+ adjust_dynamic_symbol is called, and it is that
+ function which decides whether anything needs to go
+ into these sections. */
s->flags |= SEC_EXCLUDE;
continue;
}
+ if ((s->flags & SEC_HAS_CONTENTS) == 0)
+ continue;
+
/* Allocate memory for the section contents. */
s->contents = (bfd_byte *) bfd_zalloc (dynobj, s->size);
- if (s->contents == NULL && s->size != 0)
+ if (s->contents == NULL)
return FALSE;
}
continue;
}
+ if ((s->flags & SEC_HAS_CONTENTS) == 0)
+ continue;
+
/* Allocate memory for the section contents. We use bfd_zalloc
here in case unused entries are not reclaimed before the
section's contents are written out. This should not happen,
for (s = dynobj->sections; s != NULL; s = s->next)
{
const char *name;
- bfd_boolean strip;
/* It's OK to base decisions on the section name, because none
of the dynobj section names depend upon the input files. */
if ((s->flags & SEC_LINKER_CREATED) == 0)
continue;
- strip = FALSE;
-
if (strncmp (name, ".rel", 4) == 0)
{
- if (s->size == 0)
- {
- /* We only strip the section if the output section name
- has the same name. Otherwise, there might be several
- input sections for this output section. FIXME: This
- code is probably not needed these days anyhow, since
- the linker now does not create empty output sections. */
- if (s->output_section != NULL
- && strcmp (name,
- bfd_get_section_name (s->output_section->owner,
- s->output_section)) == 0)
- strip = TRUE;
- }
- else
+ if (s->size != 0)
{
const char *outname;
asection *target;
continue;
}
- if (strip)
+ if (s->size == 0)
{
s->flags |= SEC_EXCLUDE;
continue;
}
+ if ((s->flags & SEC_HAS_CONTENTS) == 0)
+ continue;
+
/* Allocate memory for the section contents. */
s->contents = bfd_zalloc (dynobj, s->size);
- if (s->contents == NULL && s->size != 0)
+ if (s->contents == NULL)
{
bfd_set_error (bfd_error_no_memory);
return FALSE;
memory for them. */
for (s = dynobj->sections; s != NULL; s = s->next)
{
- const char *name;
- bfd_boolean strip = FALSE;
-
if ((s->flags & SEC_LINKER_CREATED) == 0)
continue;
- /* It's OK to base decisions on the section name, because none
- of the dynobj section names depend upon the input files. */
- name = bfd_get_section_name (dynobj, s);
-
- if (strncmp (name, ".rela", 5) == 0)
+ if (s == htab->splt
+ || s == htab->sgot
+ || s == htab->sdynbss)
{
- if (s->size == 0)
- {
- /* If we don't need this section, strip it from the
- output file. This is to handle .rela.bss and
- .rel.plt. We must create it in
- create_dynamic_sections, because it must be created
- before the linker maps input sections to output
- sections. The linker does that before
- adjust_dynamic_symbol is called, and it is that
- function which decides whether anything needs to go
- into these sections. */
- strip = TRUE;
- }
- else
+ /* Strip this section if we don't need it; see the
+ comment below. */
+ }
+ else if (strncmp (s->name, ".rela", 5) == 0)
+ {
+ if (s->size != 0)
{
/* We use the reloc_count field as a counter if we need
to copy relocs into the output file. */
s->reloc_count = 0;
}
}
- else if (s != htab->splt && s != htab->sgot)
+ else
{
- /* It's not one of our sections, so don't allocate space. */
+ /* It's not one of our sections. */
continue;
}
- if (strip)
+ if (s->size == 0)
{
+ /* If we don't need this section, strip it from the
+ output file. This is mostly to handle .rela.bss and
+ .rela.plt. We must create both sections in
+ create_dynamic_sections, because they must be created
+ before the linker maps input sections to output
+ sections. The linker does that before
+ adjust_dynamic_symbol is called, and it is that
+ function which decides whether anything needs to go
+ into these sections. */
s->flags |= SEC_EXCLUDE;
continue;
}
+ if ((s->flags & SEC_HAS_CONTENTS) == 0)
+ continue;
+
/* Allocate memory for the section contents. Zero the memory
for the benefit of .rela.plt, which has 4 unused entries
at the beginning, and we don't want garbage. */
s->contents = (bfd_byte *) bfd_zalloc (dynobj, s->size);
- if (s->contents == NULL && s->size != 0)
+ if (s->contents == NULL)
return FALSE;
}
projects / binutils-gdb.git / commitdiff