# configure.in and a configure template.
configdirs=
-# the debugger.
-#set -x
-
#!/bin/sh
# Configuration script template
#This file is part of GNU.
-#GNU CC is free software; you can redistribute it and/or modify
-#it under the terms of the GNU General Public License as published by
-#the Free Software Foundation; either version 1, or (at your option)
-#any later version.
-
-#GNU CC is distributed in the hope that it will be useful,
-#but WITHOUT ANY WARRANTY; without even the implied warranty of
-#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#GNU General Public License for more details.
-
-#You should have received a copy of the GNU General Public License
-#along with GNU CC; see the file COPYING. If not, write to
-#the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
# $Id$
destdir=
fatal=
hostsubdir=
+Makefile=Makefile
+Makefile_in=Makefile.in
norecurse=
removing=
srcdir=
-e '/^#### configure.in per-target parts come in here.$/,/^## end of per-target part.$/c\
#### configure.in per-target parts come in here.\
## end of per-target part.' \
+ -e '/^#### configure.in post-target parts come in here.$/,/^## end of post-target part.$/c\
+#### configure.in post-target parts come in here.\
+## end of post-target part.' \
< ${template} > template.new
if [ -r configure.in ] ; then
exit 1
fi
- # split configure.in into common, per-host, and per-target parts
+ # split configure.in into common, per-host, per-target,
+ # and post-target parts. Post-target is optional.
sed -e '/^# per\-host:/,$d' configure.in > configure.com
sed -e '1,/^# per\-host:/d' -e '/^# per\-target:/,$d' configure.in > configure.hst
- sed -e '1,/^# per\-target:/d' configure.in > configure.tgt
+ if grep -s '^# post-target:' configure.in ; then
+ sed -e '1,/^# per\-target:/d' -e '/^# post\-target:/,$d' configure.in > configure.tgt
+ sed -e '1,/^# post\-target:/d' configure.in > configure.pos
+ else
+ sed -e '1,/^# per\-target:/d' configure.in > configure.tgt
+ echo >configure.pos
+ fi
# and insert them
sed -e '/^#### configure.in common parts come in here.$/ r configure.com' \
-e '/^#### configure.in per\-host parts come in here.$/ r configure.hst' \
-e '/^#### configure.in per\-target parts come in here.$/ r configure.tgt' \
+ -e '/^#### configure.in post\-target parts come in here.$/ r configure.pos' \
template.new > configure.new
- rm -f configure.com configure.tgt configure.hst
+ rm -f configure.com configure.tgt configure.hst configure.pos
else
echo Warning: no configure.in in `pwd`
cat ${template} >> configure
echo Rebuilt configure in `pwd`
if [ -z "${norecurse}" ] ; then
+ # If template is relative path, make it absolute for recursing.
+ if echo "${template}" | grep -s '^/' ; then
+ true
+ else
+ template=`pwd`/${template}
+ fi
+
while [ -n "${configdirs}" ] ; do
# set configdir to car of configdirs, configdirs to cdr of configdirs
set ${configdirs}; configdir=$1; shift; configdirs=$*
for target in ${targets} ; do
if [ -n "${verbose}" ] ; then
- echo host \= \"${host}\", target \= \"${target}\".
+ echo " target=\"${target}\""
fi
target_makefile_frag=config/tmake-${target}
echo Warning: no `pwd`/${hostsubdir} to remove.
fi
else
- rm -f Makefile config.status ${links}
+ rm -f ${Makefile} config.status ${links}
fi
else
if [ -n "${forcesubdirs}" ] ; then
# check for existing status before allowing forced subdirs.
- if [ -f Makefile ] ; then
- echo "Makefile already exists in source directory. `pwd` not configured."
+ if [ -f ${Makefile} ] ; then
+ echo "${Makefile} already exists in source directory. `pwd` not configured."
exit 1
fi
# Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
if [ "${host}" != "${target}" ] ; then
- echo "CROSS=-DCROSS_COMPILE" > Makefile
- echo "ALL=start.encap" >> Makefile
+ echo "CROSS=-DCROSS_COMPILE" > ${Makefile}
+ echo "ALL=start.encap" >> ${Makefile}
else
- echo "ALL=all.internal" > Makefile
+ echo "ALL=all.internal" > ${Makefile}
fi
# set target, host, VPATH
- echo "host = ${host}" >> Makefile
- echo "target = ${target}" >> Makefile
+ echo "host = ${host}" >> ${Makefile}
+ echo "target = ${target}" >> ${Makefile}
if [ -n "${forcesubdirs}" ] ; then
- echo "subdir = /${hostsubdir}/${targetsubdir}" >> Makefile
+ echo "subdir = /${hostsubdir}/${targetsubdir}" >> ${Makefile}
else
- echo "subdir =" >> Makefile
+ echo "subdir =" >> ${Makefile}
fi
- # echo "workdir = `pwd`" >> Makefile
- echo "VPATH = ${srcdir}" >> Makefile
+ # echo "workdir = `pwd`" >> ${Makefile}
+ echo "VPATH = ${srcdir}" >> ${Makefile}
- # add Makefile.in
- cat ${srcdir}/Makefile.in >> Makefile
+ # add "Makefile.in" (or whatever it's called)
+ cat ${srcdir}/${Makefile_in} >> ${Makefile}
- # and shake thoroughly.
# Conditionalize the makefile for this host.
if [ -f ${srcdir}/${host_makefile_frag} ] ; then
- sed -e "/^####/ r ${srcdir}/${host_makefile_frag}" Makefile > Makefile.tem
- mv Makefile.tem Makefile
+ sed -e "/^####/ r ${srcdir}/${host_makefile_frag}" ${Makefile} > Makefile.tem
+ mv Makefile.tem ${Makefile}
fi
# Conditionalize the makefile for this target.
if [ -f ${srcdir}/${target_makefile_frag} ] ; then
- sed -e "/^####/ r ${srcdir}/${target_makefile_frag}" Makefile > Makefile.tem
- mv Makefile.tem Makefile
+ sed -e "/^####/ r ${srcdir}/${target_makefile_frag}" ${Makefile} > Makefile.tem
+ mv Makefile.tem ${Makefile}
fi
# set srcdir
- sed "s@^srcdir = \.@srcdir = ${srcdir}@" Makefile > Makefile.tem
- mv Makefile.tem Makefile
+ sed "s@^srcdir = \.@srcdir = ${srcdir}@" ${Makefile} > Makefile.tem
+ mv Makefile.tem ${Makefile}
# set destdir
if [ -n "${destdir}" ] ; then
- sed "s:^destdir =.*$:destdir = ${destdir}:" Makefile > Makefile.tem
- mv Makefile.tem Makefile
+ sed "s:^destdir =.*$:destdir = ${destdir}:" ${Makefile} > Makefile.tem
+ mv Makefile.tem ${Makefile}
fi
- # Remove all formfeeds, since some Makes get confused by them.
- sed "s/\f//" Makefile >> Makefile.tem
- mv Makefile.tem Makefile
-
# reset SUBDIRS
- sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" Makefile > Makefile.tem
- mv Makefile.tem Makefile
+ sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" ${Makefile} > Makefile.tem
+ mv Makefile.tem ${Makefile}
# reset NONSUBDIRS
- sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" Makefile > Makefile.tem
- mv Makefile.tem Makefile
+ sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" ${Makefile} > Makefile.tem
+ mv Makefile.tem ${Makefile}
using=
if [ -f ${srcdir}/${host_makefile_frag} ] ; then
andusing=${using}
fi
- echo "Created \"Makefile\"" in `pwd`${andusing}.
+ echo "Created \"${Makefile}\"" in `pwd`${andusing}.
+
+#### configure.in post-target parts come in here.
+
+## end of post-target part.
if [ "${host}" = "${target}" ] ; then
echo "Links are now set up for use with a ${target}." \
#
# $Log$
-# Revision 1.2 1991/05/27 20:54:50 rich
-# fixed a bug in multiple targets
+# Revision 1.4 1991/07/20 00:56:55 gnu
+# Roll in the configure that handles gdb.
+#
+# Revision 1.9 1991/07/06 04:35:51 gnu
+# Fix bug in configure when iterating targets.
+# Depend on alldeps.mak, not ${srcdir}/alldeps.mak, so it can be found
+# in either spot.
+#
+# Revision 1.8 1991/07/05 00:04:58 gnu
+# Thu Jul 4 14:47:06 1991 John Gilmore (gnu at cygint.cygnus.com)
+#
+# * configure.in, Makefile.in: Avoid rebuilding "depend" as much.
+# Avoid declaring Makefile dependencies, because GNU Make stupidly
+# tries to update it if we do.
+#
+# * coffread.c: Revise for minor changes to bfd internal coff
+# indexes.
+#
+# * configure: If -template= is given a relative path, make it
+# absolute before recurring in subdirectories.
#
-# Revision 1.14 1991/05/22 01:44:04 rich
-# remove gdb until config issues resolve.
+# Revision 1.7 1991/07/04 15:59:46 gnu
+# Make gdb work with configure. Only thing that doesn't work is the -list
+# option (as far as I know).
#
-# Revision 1.13 1991/05/19 08:00:09 rich
-# Added gdb.
+# Revision 1.6 1991/06/04 07:28:16 gnu
+# Change GDB over to GNU General Public License version 2.
#
-# Revision 1.12 1991/05/19 00:32:13 rich
-# Changes to deal with missing subdirs gracefully, and changes dictated
-# from dropping configure over gdb.
+# Revision 1.5 1991/05/19 07:26:54 rich
+# configure changes and -opcode.h movement.
#
# Revision 1.4 1991/05/19 00:16:45 rich
# Configure for gdb.
projects / binutils-gdb.git / commitdiff