static int trap_expected;
+#ifdef HP_OS_BUG
/* Nonzero if the next time we try to continue the inferior, it will
step one instruction and generate a spurious trace trap.
This is used to compensate for a bug in HP-UX. */
static int trap_expected_after_continue;
+#endif
/* Nonzero means expecting a trace trap
and should stop the inferior and return silently when it happens. */
oneproc = 1;
#endif /* PREPARE_TO_PROCEED */
+#ifdef HP_OS_BUG
if (trap_expected_after_continue)
{
/* If (step == 0), a trap will be automatically generated after
oneproc = 1;
trap_expected_after_continue = 0;
}
+#endif /* HP_OS_BUG */
if (oneproc)
/* We will get a trace trap after one instruction.
annotate_starting ();
+ /* Make sure that output from GDB appears before output from the
+ inferior. */
+ gdb_flush (gdb_stdout);
+
/* Resume inferior. */
resume (oneproc || step || bpstat_should_step (), stop_signal);
prev_func_start = 0;
prev_func_name = NULL;
+#ifdef HP_OS_BUG
trap_expected_after_continue = 0;
+#endif
breakpoints_inserted = 0;
breakpoint_init_inferior ();
continue;
}
+ stop_signal = w.value.sig;
+
+ stop_pc = read_pc_pid (pid);
+
+ if (STOPPED_BY_WATCHPOINT (w))
+ {
+ write_pc (stop_pc - DECR_PC_AFTER_BREAK);
+
+ remove_breakpoints ();
+ target_resume (pid, 1, TARGET_SIGNAL_0); /* Single step */
+
+ if (target_wait_hook)
+ target_wait_hook (pid, &w);
+ else
+ target_wait (pid, &w);
+ insert_breakpoints ();
+ }
+
switch (w.kind)
{
case TARGET_WAITKIND_LOADED:
break;
}
- stop_signal = w.value.sig;
-
- stop_pc = read_pc_pid (pid);
-
/* See if a thread hit a thread-specific breakpoint that was meant for
another thread. If so, then step that thread past the breakpoint,
and continue it. */
continue;
}
-#ifdef HAVE_STEPPABLE_WATCHPOINT
- /* It may not be necessary to disable the watchpoint to stop over
- it. For example, the PA can (with some kernel cooperation)
- single step over a watchpoint without disabling the watchpoint. */
- if (STOPPED_BY_WATCHPOINT (w))
- {
- resume (1, 0);
- continue;
- }
-#endif
-
-#ifdef HAVE_NONSTEPPABLE_WATCHPOINT
- /* It is far more common to need to disable a watchpoint
- to step the inferior over it. FIXME. What else might
- a debug register or page protection watchpoint scheme need
- here? */
- if (STOPPED_BY_WATCHPOINT (w))
- {
- remove_breakpoints ();
- resume (1, 0);
-
- /* FIXME: This is bogus. You can't interact with the
- inferior except when it is stopped. It apparently
- happens to work on Irix4, but it depends on /proc
- allowing us to muck with the memory of a running process,
- and the kernel deciding to run one instruction of the
- inferior before it executes our insert_breakpoints code,
- which seems like an awfully dubious assumption. */
- insert_breakpoints ();
-
- continue;
- }
-#endif
-
-#ifdef HAVE_CONTINUABLE_WATCHPOINT
- /* It may be possible to simply continue after a watchpoint. */
- STOPPED_BY_WATCHPOINT (w);
-#endif
-
stop_func_start = 0;
stop_func_name = 0;
/* Don't care about return value; stop_func_start and stop_func_name
anyway, and the common ones like SIGHUP, SIGINT, SIGALRM, etc.
will work right anyway. */
- sigfirst = siglast = atoi (*argv);
+ sigfirst = siglast = (int) target_signal_from_command (atoi (*argv));
if ((*argv)[digits] == '-')
{
- siglast = atoi ((*argv) + digits + 1);
+ siglast =
+ (int) target_signal_from_command (atoi ((*argv) + digits + 1));
}
if (sigfirst > siglast)
{
sigfirst = siglast;
siglast = signum;
}
- if (sigfirst < 0 || sigfirst >= nsigs)
- {
- error ("Signal %d not in range 0-%d", sigfirst, nsigs - 1);
- }
- if (siglast < 0 || siglast >= nsigs)
- {
- error ("Signal %d not in range 0-%d", siglast, nsigs - 1);
- }
}
else
{
}
}
break;
+ case TARGET_SIGNAL_0:
+ case TARGET_SIGNAL_DEFAULT:
+ case TARGET_SIGNAL_UNKNOWN:
+ /* Make sure that "all" doesn't print these. */
+ break;
default:
sigs[signum] = 1;
break;
oursig = target_signal_from_name (signum_exp);
if (oursig == TARGET_SIGNAL_UNKNOWN)
{
- /* Nope, maybe it's an address which evaluates to a signal
- number. */
- /* The numeric signal refers to our own internal
- signal numbering from target.h, not to host/target signal number.
- This is a feature; users really should be using symbolic names
- anyway, and the common ones like SIGHUP, SIGINT, SIGALRM, etc.
- will work right anyway. */
- int i = parse_and_eval_address (signum_exp);
- if (i >= (int)TARGET_SIGNAL_LAST
- || i < 0
- || i == (int)TARGET_SIGNAL_UNKNOWN
- || i == (int)TARGET_SIGNAL_DEFAULT)
- error ("Signal number out of bounds.");
- oursig = (enum target_signal)i;
+ /* No, try numeric. */
+ oursig =
+ target_signal_from_command (parse_and_eval_address (signum_exp));
}
sig_print_info (oursig);
return;
add_info ("signals", signals_info,
"What debugger does when program gets various signals.\n\
-Specify a signal number as argument to print info on that signal only.");
+Specify a signal as argument to print info on that signal only.");
add_info_alias ("handle", "signals", 0);
add_com ("handle", class_run, handle_command,
- "Specify how to handle a signal.\n\
-Args are signal numbers and actions to apply to those signals.\n\
-Signal numbers may be numeric (ex. 11) or symbolic (ex. SIGSEGV).\n\
-Numeric ranges may be specified with the form LOW-HIGH (ex. 14-21).\n\
+ concat ("Specify how to handle a signal.\n\
+Args are signals and actions to apply to those signals.\n\
+Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
+from 1-15 are allowed for compatibility with old versions of GDB.\n\
+Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
The special arg \"all\" is recognized to mean all signals except those\n\
-used by the debugger, typically SIGTRAP and SIGINT.\n\
-Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
+used by the debugger, typically SIGTRAP and SIGINT.\n",
+"Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
\"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\
Stop means reenter debugger if this signal happens (implies print).\n\
Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
-Pass and Stop may be combined.");
+Pass and Stop may be combined.", NULL));
stop_command = add_cmd ("stop", class_obscure, not_just_help_class_command,
"There is no `stop' command, but you can set a hook on `stop'.\n\
projects / binutils-gdb.git / commitdiff