+++ /dev/null
-config BR2_TARGET_Q5
- bool "jp-embedded Q5 board support"
- depends on BR2_mipsel
- select BR2_PACKAGE_LINUX
- help
- jp-embedded Q5 series MIPS based boards, see
- http://www.jp-embedded.com for further information.
-
-
-comment "Package support"
- depends on BR2_TARGET_Q5
-
+++ /dev/null
-# Override the default uClibc configuration
-ifeq ($(BR2_TARGET_Q5),y)
-
-include target/device/jp/q5/Makefile.in
-include target/device/jp/q5/linux.mk
-
-endif
+++ /dev/null
-#JP_Q5_PATH=target/device/jp/q5
-BOARD_PATH=target/device/jp/q5
-
-BR2_PACKAGE_BUSYBOX_CONFIG=$(BOARD_PATH)/busybox.config
-UCLIBC_CONFIG_FILE=$(BOARD_PATH)/uClibc.config.$(ARCH)
-
-TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
-TARGET_DEVICE_TABLE=$(BOARD_PATH)/device_table.txt
-
-TARGETS+=linux
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-#
-HAVE_DOT_CONFIG=y
-
-#
-# General Configuration
-#
-# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
-CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y
-# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
-CONFIG_FEATURE_VERBOSE_USAGE=y
-# CONFIG_FEATURE_INSTALLER is not set
-# CONFIG_LOCALE_SUPPORT is not set
-# CONFIG_FEATURE_DEVFS is not set
-CONFIG_FEATURE_DEVPTS=y
-# CONFIG_FEATURE_CLEAN_UP is not set
-CONFIG_FEATURE_SUID=y
-# CONFIG_FEATURE_SUID_CONFIG is not set
-# CONFIG_SELINUX is not set
-
-#
-# Build Options
-#
-# CONFIG_STATIC is not set
-CONFIG_LFS=y
-# USING_CROSS_COMPILER is not set
-EXTRA_CFLAGS_OPTIONS=""
-
-#
-# Installation Options
-#
-# CONFIG_INSTALL_NO_USR is not set
-PREFIX="./_install"
-
-#
-# Archival Utilities
-#
-# CONFIG_AR is not set
-CONFIG_BUNZIP2=y
-# CONFIG_CPIO is not set
-# CONFIG_DPKG is not set
-# CONFIG_DPKG_DEB is not set
-CONFIG_GUNZIP=y
-# CONFIG_FEATURE_GUNZIP_UNCOMPRESS is not set
-CONFIG_GZIP=y
-# CONFIG_RPM2CPIO is not set
-# CONFIG_RPM is not set
-CONFIG_TAR=y
-CONFIG_FEATURE_TAR_CREATE=y
-CONFIG_FEATURE_TAR_BZIP2=y
-# CONFIG_FEATURE_TAR_FROM is not set
-CONFIG_FEATURE_TAR_GZIP=y
-# CONFIG_FEATURE_TAR_COMPRESS is not set
-# CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY is not set
-CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
-# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set
-# CONFIG_UNCOMPRESS is not set
-CONFIG_UNZIP=y
-
-#
-# Common options for cpio and tar
-#
-# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
-
-#
-# Coreutils
-#
-CONFIG_BASENAME=y
-# CONFIG_CAL is not set
-CONFIG_CAT=y
-CONFIG_CHGRP=y
-CONFIG_CHMOD=y
-CONFIG_CHOWN=y
-CONFIG_CHROOT=y
-CONFIG_CMP=y
-# CONFIG_COMM is not set
-CONFIG_CP=y
-CONFIG_CUT=y
-CONFIG_DATE=y
-CONFIG_FEATURE_DATE_ISOFMT=y
-CONFIG_DD=y
-CONFIG_DF=y
-CONFIG_DIRNAME=y
-CONFIG_DOS2UNIX=y
-CONFIG_UNIX2DOS=y
-CONFIG_DU=y
-CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K=y
-CONFIG_ECHO=y
-CONFIG_FEATURE_FANCY_ECHO=y
-CONFIG_ENV=y
-# CONFIG_PRINTENV is not set
-CONFIG_EXPR=y
-CONFIG_FALSE=y
-# CONFIG_FOLD is not set
-CONFIG_HEAD=y
-# CONFIG_FEATURE_FANCY_HEAD is not set
-CONFIG_HOSTID=y
-CONFIG_ID=y
-CONFIG_INSTALL=y
-# CONFIG_LENGTH is not set
-CONFIG_LN=y
-CONFIG_LOGNAME=y
-CONFIG_LS=y
-CONFIG_FEATURE_LS_FILETYPES=y
-CONFIG_FEATURE_LS_FOLLOWLINKS=y
-CONFIG_FEATURE_LS_RECURSIVE=y
-CONFIG_FEATURE_LS_SORTFILES=y
-CONFIG_FEATURE_LS_TIMESTAMPS=y
-CONFIG_FEATURE_LS_USERNAME=y
-CONFIG_FEATURE_LS_COLOR=y
-CONFIG_MD5SUM=y
-CONFIG_MKDIR=y
-# CONFIG_MKFIFO is not set
-CONFIG_MKNOD=y
-CONFIG_MV=y
-# CONFIG_NICE is not set
-# CONFIG_OD is not set
-# CONFIG_PRINTF is not set
-CONFIG_PWD=y
-# CONFIG_REALPATH is not set
-CONFIG_RM=y
-CONFIG_RMDIR=y
-# CONFIG_SEQ is not set
-CONFIG_SHA1SUM=y
-CONFIG_SLEEP=y
-# CONFIG_FEATURE_FANCY_SLEEP is not set
-CONFIG_SORT=y
-CONFIG_SORT_BIG=y
-# CONFIG_STAT is not set
-CONFIG_STTY=y
-# CONFIG_SUM is not set
-CONFIG_SYNC=y
-CONFIG_TAIL=y
-CONFIG_FEATURE_FANCY_TAIL=y
-CONFIG_TEE=y
-CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
-CONFIG_TEST=y
-
-#
-# test (forced enabled for use with shell)
-#
-CONFIG_FEATURE_TEST_64=y
-CONFIG_TOUCH=y
-# CONFIG_TR is not set
-CONFIG_TRUE=y
-CONFIG_TTY=y
-CONFIG_UNAME=y
-CONFIG_UNIQ=y
-CONFIG_USLEEP=y
-CONFIG_UUDECODE=y
-CONFIG_UUENCODE=y
-# CONFIG_WATCH is not set
-CONFIG_WC=y
-# CONFIG_WHO is not set
-CONFIG_WHOAMI=y
-CONFIG_YES=y
-
-#
-# Common options for cp and mv
-#
-CONFIG_FEATURE_PRESERVE_HARDLINKS=y
-
-#
-# Common options for ls and more
-#
-CONFIG_FEATURE_AUTOWIDTH=y
-
-#
-# Common options for df, du, ls
-#
-CONFIG_FEATURE_HUMAN_READABLE=y
-
-#
-# Common options for md5sum, sha1sum
-#
-CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
-
-#
-# Console Utilities
-#
-CONFIG_CHVT=y
-CONFIG_CLEAR=y
-CONFIG_DEALLOCVT=y
-# CONFIG_DUMPKMAP is not set
-# CONFIG_LOADFONT is not set
-# CONFIG_LOADKMAP is not set
-CONFIG_OPENVT=y
-CONFIG_RESET=y
-# CONFIG_SETKEYCODES is not set
-
-#
-# Debian Utilities
-#
-CONFIG_MKTEMP=y
-# CONFIG_PIPE_PROGRESS is not set
-CONFIG_READLINK=y
-CONFIG_FEATURE_READLINK_FOLLOW=y
-CONFIG_RUN_PARTS=y
-CONFIG_START_STOP_DAEMON=y
-CONFIG_WHICH=y
-
-#
-# Linux Ext2 FS Progs
-#
-# CONFIG_CHATTR is not set
-# CONFIG_LSATTR is not set
-
-#
-# Editors
-#
-# CONFIG_AWK is not set
-# CONFIG_PATCH is not set
-CONFIG_SED=y
-CONFIG_VI=y
-CONFIG_FEATURE_VI_COLON=y
-CONFIG_FEATURE_VI_YANKMARK=y
-CONFIG_FEATURE_VI_SEARCH=y
-CONFIG_FEATURE_VI_USE_SIGNALS=y
-CONFIG_FEATURE_VI_DOT_CMD=y
-CONFIG_FEATURE_VI_READONLY=y
-CONFIG_FEATURE_VI_SETOPTS=y
-CONFIG_FEATURE_VI_SET=y
-CONFIG_FEATURE_VI_WIN_RESIZE=y
-CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
-
-#
-# Finding Utilities
-#
-CONFIG_FIND=y
-CONFIG_FEATURE_FIND_MTIME=y
-CONFIG_FEATURE_FIND_PERM=y
-CONFIG_FEATURE_FIND_TYPE=y
-CONFIG_FEATURE_FIND_XDEV=y
-# CONFIG_FEATURE_FIND_NEWER is not set
-# CONFIG_FEATURE_FIND_INUM is not set
-CONFIG_GREP=y
-CONFIG_FEATURE_GREP_EGREP_ALIAS=y
-CONFIG_FEATURE_GREP_FGREP_ALIAS=y
-CONFIG_FEATURE_GREP_CONTEXT=y
-CONFIG_XARGS=y
-# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set
-CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
-CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
-CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
-
-#
-# Init Utilities
-#
-CONFIG_INIT=y
-CONFIG_FEATURE_USE_INITTAB=y
-CONFIG_FEATURE_INITRD=y
-# CONFIG_FEATURE_INIT_COREDUMPS is not set
-CONFIG_FEATURE_EXTRA_QUIET=y
-CONFIG_HALT=y
-CONFIG_POWEROFF=y
-CONFIG_REBOOT=y
-# CONFIG_MESG is not set
-
-#
-# Login/Password Management Utilities
-#
-# CONFIG_USE_BB_PWD_GRP is not set
-CONFIG_ADDGROUP=y
-CONFIG_DELGROUP=y
-CONFIG_ADDUSER=y
-CONFIG_DELUSER=y
-CONFIG_GETTY=y
-# CONFIG_FEATURE_U_W_TMP is not set
-CONFIG_LOGIN=y
-CONFIG_FEATURE_SECURETTY=y
-CONFIG_PASSWD=y
-CONFIG_SU=y
-CONFIG_SULOGIN=y
-CONFIG_VLOCK=y
-
-#
-# Common options for adduser, deluser, login, su
-#
-CONFIG_FEATURE_SHADOWPASSWDS=y
-
-#
-# Miscellaneous Utilities
-#
-# CONFIG_ADJTIMEX is not set
-# CONFIG_CROND is not set
-# CONFIG_CRONTAB is not set
-CONFIG_DC=y
-# CONFIG_DEVFSD is not set
-# CONFIG_EJECT is not set
-# CONFIG_LAST is not set
-# CONFIG_HDPARM is not set
-# CONFIG_MAKEDEVS is not set
-CONFIG_MT=y
-# CONFIG_RX is not set
-CONFIG_STRINGS=y
-CONFIG_TIME=y
-# CONFIG_WATCHDOG is not set
-
-#
-# Linux Module Utilities
-#
-CONFIG_INSMOD=y
-CONFIG_FEATURE_2_4_MODULES=y
-# CONFIG_FEATURE_2_6_MODULES is not set
-# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
-# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
-# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
-# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
-CONFIG_LSMOD=y
-CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
-CONFIG_FEATURE_QUERY_MODULE_INTERFACE=y
-CONFIG_MODPROBE=y
-CONFIG_RMMOD=y
-CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-
-#
-# Networking Utilities
-#
-# CONFIG_FEATURE_IPV6 is not set
-# CONFIG_ARPING is not set
-# CONFIG_ETHER_WAKE is not set
-# CONFIG_FAKEIDENTD is not set
-# CONFIG_FTPGET is not set
-# CONFIG_FTPPUT is not set
-CONFIG_HOSTNAME=y
-# CONFIG_HTTPD is not set
-CONFIG_IFCONFIG=y
-CONFIG_FEATURE_IFCONFIG_STATUS=y
-# CONFIG_FEATURE_IFCONFIG_SLIP is not set
-# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
-# CONFIG_FEATURE_IFCONFIG_HW is not set
-# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
-CONFIG_IFUPDOWN=y
-# CONFIG_FEATURE_IFUPDOWN_IP is not set
-CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y
-CONFIG_FEATURE_IFUPDOWN_IPV4=y
-# CONFIG_FEATURE_IFUPDOWN_IPV6 is not set
-# CONFIG_FEATURE_IFUPDOWN_IPX is not set
-# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
-# CONFIG_INETD is not set
-# CONFIG_IP is not set
-# CONFIG_IPCALC is not set
-# CONFIG_IPADDR is not set
-# CONFIG_IPLINK is not set
-# CONFIG_IPROUTE is not set
-# CONFIG_IPTUNNEL is not set
-# CONFIG_NAMEIF is not set
-# CONFIG_NC is not set
-CONFIG_NETSTAT=y
-CONFIG_NSLOOKUP=y
-CONFIG_PING=y
-CONFIG_FEATURE_FANCY_PING=y
-CONFIG_ROUTE=y
-CONFIG_TELNET=y
-CONFIG_FEATURE_TELNET_TTYPE=y
-# CONFIG_FEATURE_TELNET_AUTOLOGIN is not set
-# CONFIG_TELNETD is not set
-# CONFIG_TFTP is not set
-# CONFIG_TRACEROUTE is not set
-# CONFIG_VCONFIG is not set
-CONFIG_WGET=y
-CONFIG_FEATURE_WGET_STATUSBAR=y
-CONFIG_FEATURE_WGET_AUTHENTICATION=y
-# CONFIG_FEATURE_WGET_IP6_LITERAL is not set
-
-#
-# udhcp Server/Client
-#
-CONFIG_UDHCPD=y
-CONFIG_UDHCPC=y
-CONFIG_DUMPLEASES=y
-CONFIG_FEATURE_UDHCP_SYSLOG=y
-# CONFIG_FEATURE_UDHCP_DEBUG is not set
-# CONFIG_ZCIP is not set
-
-#
-# Process Utilities
-#
-CONFIG_FREE=y
-CONFIG_KILL=y
-CONFIG_KILLALL=y
-CONFIG_PIDOF=y
-CONFIG_PS=y
-# CONFIG_RENICE is not set
-# CONFIG_TOP is not set
-CONFIG_UPTIME=y
-# CONFIG_SYSCTL is not set
-
-#
-# Another Bourne-like Shell
-#
-CONFIG_FEATURE_SH_IS_ASH=y
-# CONFIG_FEATURE_SH_IS_HUSH is not set
-# CONFIG_FEATURE_SH_IS_LASH is not set
-# CONFIG_FEATURE_SH_IS_MSH is not set
-# CONFIG_FEATURE_SH_IS_NONE is not set
-CONFIG_ASH=y
-
-#
-# Ash Shell Options
-#
-CONFIG_ASH_JOB_CONTROL=y
-# CONFIG_ASH_TIMEOUT is not set
-CONFIG_ASH_ALIAS=y
-CONFIG_ASH_MATH_SUPPORT=y
-CONFIG_ASH_MATH_SUPPORT_64=y
-# CONFIG_ASH_GETOPTS is not set
-# CONFIG_ASH_CMDCMD is not set
-# CONFIG_ASH_MAIL is not set
-CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
-# CONFIG_ASH_RANDOM_SUPPORT is not set
-# CONFIG_HUSH is not set
-# CONFIG_LASH is not set
-# CONFIG_MSH is not set
-
-#
-# Bourne Shell Options
-#
-# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
-# CONFIG_FEATURE_SH_STANDALONE_SHELL is not set
-CONFIG_FEATURE_COMMAND_EDITING=y
-CONFIG_FEATURE_COMMAND_HISTORY=15
-CONFIG_FEATURE_COMMAND_SAVEHISTORY=y
-CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y
-# CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION is not set
-CONFIG_FEATURE_SH_FANCY_PROMPT=y
-
-#
-# System Logging Utilities
-#
-CONFIG_SYSLOGD=y
-CONFIG_FEATURE_ROTATE_LOGFILE=y
-# CONFIG_FEATURE_REMOTE_LOG is not set
-# CONFIG_FEATURE_IPC_SYSLOG is not set
-CONFIG_KLOGD=y
-CONFIG_LOGGER=y
-
-#
-# Linux System Utilities
-#
-CONFIG_DMESG=y
-# CONFIG_FBSET is not set
-# CONFIG_FDFLUSH is not set
-CONFIG_FDFORMAT=y
-CONFIG_FDISK=y
-FDISK_SUPPORT_LARGE_DISKS=y
-CONFIG_FEATURE_FDISK_WRITABLE=y
-# CONFIG_FEATURE_AIX_LABEL is not set
-# CONFIG_FEATURE_SGI_LABEL is not set
-# CONFIG_FEATURE_SUN_LABEL is not set
-# CONFIG_FEATURE_OSF_LABEL is not set
-# CONFIG_FEATURE_FDISK_ADVANCED is not set
-# CONFIG_FREERAMDISK is not set
-# CONFIG_FSCK_MINIX is not set
-# CONFIG_MKFS_MINIX is not set
-CONFIG_GETOPT=y
-CONFIG_HEXDUMP=y
-CONFIG_HWCLOCK=y
-CONFIG_FEATURE_HWCLOCK_LONGOPTIONS=y
-# CONFIG_LOSETUP is not set
-# CONFIG_MKSWAP is not set
-CONFIG_MORE=y
-CONFIG_FEATURE_USE_TERMIOS=y
-CONFIG_PIVOT_ROOT=y
-CONFIG_RDATE=y
-CONFIG_SWAPONOFF=y
-CONFIG_MOUNT=y
-# CONFIG_NFSMOUNT is not set
-CONFIG_UMOUNT=y
-# CONFIG_FEATURE_MOUNT_FORCE is not set
-
-#
-# Common options for mount/umount
-#
-CONFIG_FEATURE_MOUNT_LOOP=y
-# CONFIG_FEATURE_MTAB_SUPPORT is not set
-# CONFIG_READPROFILE is not set
-
-#
-# Debugging Options
-#
-# CONFIG_DEBUG is not set
+++ /dev/null
-# When building a target filesystem, it is desirable to not have to
-# become root and then run 'mknod' a thousand times. Using a device
-# table you can create device nodes and directories "on the fly".
-#
-# This is a sample device table file for use with genext2fs. You can
-# do all sorts of interesting things with a device table file. For
-# example, if you want to adjust the permissions on a particular file
-# you can just add an entry like:
-# /sbin/foobar f 2755 0 0 - - - - -
-# and (assuming the file /sbin/foobar exists) it will be made setuid
-# root (regardless of what its permissions are on the host filesystem.
-# Furthermore, you can use a single table entry to create a many device
-# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15]
-# I could just use the following two table entries:
-# /dev/hda b 640 0 0 3 0 0 0 -
-# /dev/hda b 640 0 0 3 1 1 1 15
-#
-# Device table entries take the form of:
-# <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-# where name is the file name, type can be one of:
-# f A regular file
-# d Directory
-# c Character special device file
-# b Block special device file
-# p Fifo (named pipe)
-# uid is the user id for the target file, gid is the group id for the
-# target file. The rest of the entries (major, minor, etc) apply only
-# to device special files.
-
-# Have fun
-# -Erik Andersen <andersen@codepoet.org>
-#
-
-#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-/dev d 755 0 0 - - - - -
-/dev/pts d 755 0 0 - - - - -
-/tmp d 1777 0 0 - - - - -
-/etc d 755 0 0 - - - - -
-/home/default d 2755 1000 1000 - - - - -
-#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-/bin/busybox f 4755 0 0 - - - - -
-/etc/shadow f 600 0 0 - - - - -
-/etc/passwd f 644 0 0 - - - - -
-/etc/network/if-up.d d 755 0 0 - - - - -
-/etc/network/if-pre-up.d d 755 0 0 - - - - -
-/etc/network/if-down.d d 755 0 0 - - - - -
-/etc/network/if-post-down.d d 755 0 0 - - - - -
-/usr/share/udhcpc/default.script f 755 0 0 - - - - -
-# uncomment this to allow starting x as non-root
-#/usr/X11R6/bin/Xfbdev f 4755 0 0 - - - - -
-# Normal system devices
-/dev/mem c 640 0 0 1 1 0 0 -
-/dev/kmem c 640 0 0 1 2 0 0 -
-/dev/null c 666 0 0 1 3 0 0 -
-/dev/zero c 666 0 0 1 5 0 0 -
-/dev/random c 666 0 0 1 8 0 0 -
-/dev/urandom c 666 0 0 1 9 0 0 -
-/dev/ram b 640 0 0 1 1 0 0 -
-/dev/ram b 640 0 0 1 0 0 1 4
-/dev/loop b 640 0 0 7 0 0 1 2
-/dev/rtc c 640 0 0 10 135 - - -
-/dev/console c 666 0 0 5 1 - - -
-/dev/tty c 666 0 0 5 0 - - -
-/dev/tty c 666 0 0 4 0 0 1 8
-/dev/ttyp c 666 0 0 3 0 0 1 10
-/dev/ptyp c 666 0 0 2 0 0 1 10
-/dev/ptmx c 666 0 0 5 2 - - -
-/dev/ttyP c 666 0 0 57 0 0 1 4
-/dev/ttyS c 666 0 0 4 64 0 1 4
-/dev/fb c 640 0 5 29 0 0 32 4
-#/dev/ttySA c 666 0 0 204 5 0 1 3
-/dev/psaux c 666 0 0 10 1 0 0 -
-#/dev/ppp c 666 0 0 108 0 - - -
-
-# MTD stuff
-/dev/mtd c 640 0 0 90 0 0 2 4
-/dev/mtdblock b 640 0 0 31 0 0 1 4
-
-#Tun/tap driver
-/dev/net d 755 0 0 - - - - -
-/dev/net/tun c 660 0 0 10 200 - - -
-
-# Audio stuff
-#/dev/audio c 666 0 29 14 4 - - -
-#/dev/audio1 c 666 0 29 14 20 - - -
-#/dev/dsp c 666 0 29 14 3 - - -
-#/dev/dsp1 c 666 0 29 14 19 - - -
-#/dev/sndstat c 666 0 29 14 6 - - -
-
-# User-mode Linux stuff
-/dev/ubda b 640 0 0 98 0 0 0 -
-/dev/ubda b 640 0 0 98 1 1 1 15
-
-# IDE Devices
-/dev/hda b 640 0 0 3 0 0 0 -
-/dev/hda b 640 0 0 3 1 1 1 15
-/dev/hdb b 640 0 0 3 64 0 0 -
-/dev/hdb b 640 0 0 3 65 1 1 15
-#/dev/hdc b 640 0 0 22 0 0 0 -
-#/dev/hdc b 640 0 0 22 1 1 1 15
-#/dev/hdd b 640 0 0 22 64 0 0 -
-#/dev/hdd b 640 0 0 22 65 1 1 15
-#/dev/hde b 640 0 0 33 0 0 0 -
-#/dev/hde b 640 0 0 33 1 1 1 15
-#/dev/hdf b 640 0 0 33 64 0 0 -
-#/dev/hdf b 640 0 0 33 65 1 1 15
-#/dev/hdg b 640 0 0 34 0 0 0 -
-#/dev/hdg b 640 0 0 34 1 1 1 15
-#/dev/hdh b 640 0 0 34 64 0 0 -
-#/dev/hdh b 640 0 0 34 65 1 1 15
-
-# SCSI Devices
-#/dev/sda b 640 0 0 8 0 0 0 -
-#/dev/sda b 640 0 0 8 1 1 1 15
-#/dev/sdb b 640 0 0 8 16 0 0 -
-#/dev/sdb b 640 0 0 8 17 1 1 15
-#/dev/sdc b 640 0 0 8 32 0 0 -
-#/dev/sdc b 640 0 0 8 33 1 1 15
-#/dev/sdd b 640 0 0 8 48 0 0 -
-#/dev/sdd b 640 0 0 8 49 1 1 15
-#/dev/sde b 640 0 0 8 64 0 0 -
-#/dev/sde b 640 0 0 8 65 1 1 15
-#/dev/sdf b 640 0 0 8 80 0 0 -
-#/dev/sdf b 640 0 0 8 81 1 1 15
-#/dev/sdg b 640 0 0 8 96 0 0 -
-#/dev/sdg b 640 0 0 8 97 1 1 15
-#/dev/sdh b 640 0 0 8 112 0 0 -
-#/dev/sdh b 640 0 0 8 113 1 1 15
-#/dev/sg c 640 0 0 21 0 0 1 15
-#/dev/scd b 640 0 0 11 0 0 1 15
-#/dev/st c 640 0 0 9 0 0 1 8
-#/dev/nst c 640 0 0 9 128 0 1 8
-#/dev/st c 640 0 0 9 32 1 1 4
-#/dev/st c 640 0 0 9 64 1 1 4
-#/dev/st c 640 0 0 9 96 1 1 4
-
-# Floppy disk devices
-#/dev/fd b 640 0 0 2 0 0 1 2
-#/dev/fd0d360 b 640 0 0 2 4 0 0 -
-#/dev/fd1d360 b 640 0 0 2 5 0 0 -
-#/dev/fd0h1200 b 640 0 0 2 8 0 0 -
-#/dev/fd1h1200 b 640 0 0 2 9 0 0 -
-#/dev/fd0u1440 b 640 0 0 2 28 0 0 -
-#/dev/fd1u1440 b 640 0 0 2 29 0 0 -
-#/dev/fd0u2880 b 640 0 0 2 32 0 0 -
-#/dev/fd1u2880 b 640 0 0 2 33 0 0 -
-
-# All the proprietary cdrom devices in the world
-#/dev/aztcd b 640 0 0 29 0 0 0 -
-#/dev/bpcd b 640 0 0 41 0 0 0 -
-#/dev/capi20 c 640 0 0 68 0 0 1 2
-#/dev/cdu31a b 640 0 0 15 0 0 0 -
-#/dev/cdu535 b 640 0 0 24 0 0 0 -
-#/dev/cm206cd b 640 0 0 32 0 0 0 -
-#/dev/sjcd b 640 0 0 18 0 0 0 -
-#/dev/sonycd b 640 0 0 15 0 0 0 -
-#/dev/gscd b 640 0 0 16 0 0 0 -
-#/dev/sbpcd b 640 0 0 25 0 0 0 -
-#/dev/sbpcd b 640 0 0 25 0 0 1 4
-#/dev/mcd b 640 0 0 23 0 0 0 -
-#/dev/optcd b 640 0 0 17 0 0 0 -
-
+++ /dev/null
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile 2004-02-13 01:03:35.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile 2004-02-13 10:04:07.000000000 +0100
-@@ -16,7 +16,7 @@ all: au1000.o
-
- O_TARGET := au1000.o
-
--export-objs = prom.o clocks.o power.o usbdev.o
-+export-objs = prom.o clocks.o power.o usbdev.o setup.o
-
- obj-y := prom.o int-handler.o dma.o irq.o puts.o time.o reset.o \
- clocks.o power.o setup.o sleeper.o
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/pci_fixup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/pci_fixup.c
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/pci_fixup.c 2004-02-13 01:03:35.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/pci_fixup.c 2004-02-13 10:09:43.000000000 +0100
-@@ -105,42 +105,8 @@ void __init pcibios_fixup(void)
-
- void __init pcibios_fixup_irqs(void)
- {
--#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
-- unsigned int slot, func;
-- unsigned char pin;
-- struct pci_dev *dev;
--
-- pci_for_each_dev(dev) {
-- if (dev->bus->number != 0)
-- return;
--
-- dev->irq = 0xff;
-- slot = PCI_SLOT(dev->devfn);
--#if defined( CONFIG_SOC_AU1500 )
-- switch (slot) {
-- case 12:
-- case 13:
-- default:
-- dev->irq = AU1000_PCI_INTA;
-- break;
-- }
--#elif defined( CONFIG_SOC_AU1550 )
-- switch (slot) {
-- default:
-- case 12:
-- dev->irq = AU1000_PCI_INTA;
-- break;
-- case 13:
-- dev->irq = AU1000_PCI_INTB;
-- break;
-- }
--#endif
--
-- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-- DBG("slot %d irq %d\n", slot, dev->irq);
-- }
--#endif
- }
-+
- unsigned int pcibios_assign_all_busses(void)
- {
- return 0;
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c 2004-02-13 01:03:32.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c 2004-02-13 10:07:12.000000000 +0100
-@@ -81,7 +81,7 @@ void prom_init_cmdline(void)
- }
-
-
--char *prom_getenv(char *envname)
-+char *prom_getenv_n(char *envname, int n)
- {
- /*
- * Return a pointer to the given environment variable.
-@@ -89,19 +89,24 @@ char *prom_getenv(char *envname)
- */
-
- t_env_var *env = (t_env_var *)prom_envp;
-- int i;
-+ int i, j=0;
-
- i = strlen(envname);
-
- while(env->name) {
- if(strncmp(envname, env->name, i) == 0) {
-- return(env->name + strlen(envname) + 1);
-+ if(j++ == n) return(env->name + strlen(envname) + 1);
- }
- env++;
- }
- return(NULL);
- }
-
-+char *prom_getenv(char *envname)
-+{
-+ return prom_getenv_n(envname, 0);
-+}
-+
- inline unsigned char str2hexnum(unsigned char c)
- {
- if(c >= '0' && c <= '9')
-@@ -128,18 +133,18 @@ inline void str2eaddr(unsigned char *ea,
- }
- }
-
--int get_ethernet_addr(char *ethernet_addr)
-+int get_ethernet_addr_n(char *ethernet_addr, int n)
- {
- char *ethaddr_str;
-
-- ethaddr_str = prom_getenv("ethaddr");
-+ ethaddr_str = prom_getenv_n("ethaddr", n);
- if (!ethaddr_str) {
- printk("ethaddr not set in boot prom\n");
- return -1;
- }
- str2eaddr(ethernet_addr, ethaddr_str);
-
--#if 0
-+#if 1
- {
- int i;
-
-@@ -153,7 +158,13 @@ int get_ethernet_addr(char *ethernet_add
- return 0;
- }
-
-+int get_ethernet_addr(char *ethernet_addr)
-+{
-+ return get_ethernet_addr_n(ethernet_addr, 0);
-+}
-+
- void prom_free_prom_memory (void) {}
-+EXPORT_SYMBOL(get_ethernet_addr_n);
- EXPORT_SYMBOL(prom_getcmdline);
- EXPORT_SYMBOL(get_ethernet_addr);
- EXPORT_SYMBOL(str2eaddr);
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c 2004-02-13 01:03:31.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c 2004-02-13 10:04:07.000000000 +0100
-@@ -57,6 +57,7 @@ extern struct ide_ops *ide_ops;
- #endif
-
- extern struct rtc_ops no_rtc_ops;
-+void (*__wbflush) (void);
- extern char * __init prom_getcmdline(void);
- extern void __init board_setup(void);
- extern void au1000_restart(char *);
-@@ -71,6 +72,11 @@ static phys_t au1500_fixup_bigphys_addr(
- extern void au1xxx_time_init(void);
- extern void au1xxx_timer_setup(void);
-
-+void au1500_wbflush(void)
-+{
-+ __asm__ volatile ("sync");
-+}
-+
- void __init au1x00_setup(void)
- {
- char *argptr;
-@@ -89,6 +95,8 @@ void __init au1x00_setup(void)
- }
- #endif
-
-+ __wbflush = au1500_wbflush;
-+
- #ifdef CONFIG_FB_AU1100
- if ((argptr = strstr(argptr, "video=")) == NULL) {
- argptr = prom_getcmdline();
-@@ -215,3 +223,6 @@ static phys_t au1500_fixup_bigphys_addr(
- return phys_addr;
- }
- #endif
-+
-+EXPORT_SYMBOL(__wbflush);
-+
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/pb1500/irqmap.c linux-2.4.25-rc2_q/arch/mips/au1000/pb1500/irqmap.c
---- linux-2.4.25-rc2_org/arch/mips/au1000/pb1500/irqmap.c 2004-02-13 01:03:28.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/pb1500/irqmap.c 2004-02-13 10:10:21.000000000 +0100
-@@ -76,6 +76,7 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
- { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
-+ { AU1500_GPIO_206, INTC_INT_FALL_EDGE, 0 },
- { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
-
- { AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/kernel/head.S linux-2.4.25-rc2_q/arch/mips/kernel/head.S
---- linux-2.4.25-rc2_org/arch/mips/kernel/head.S 2004-02-13 01:02:42.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/kernel/head.S 2004-02-13 10:07:43.000000000 +0100
-@@ -33,7 +33,9 @@
- * Reserved space for exception handlers.
- * Necessary for machines which link their kernels at KSEG0.
- */
-- .fill 0x400
-+ j kernel_entry
-+ nop
-+ .org 0x400
-
- /* The following two symbols are used for kernel profiling. */
- EXPORT(stext)
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/Makefile linux-2.4.25-rc2_q/arch/mips/Makefile
---- linux-2.4.25-rc2_org/arch/mips/Makefile 2004-02-13 01:01:00.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/Makefile 2004-04-09 10:40:09.000000000 +0200
-@@ -69,13 +69,13 @@ endif
- set_gccflags = $(shell \
- while :; do \
- cpu=$(1); isa=-$(2); \
-- for gcc_opt in -march= -mcpu=; do \
-+ for gcc_opt in -march=; do \
- $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
- -xc /dev/null > /dev/null 2>&1 && \
- break 2; \
- done; \
- cpu=$(3); isa=-$(4); \
-- for gcc_opt in -march= -mcpu=; do \
-+ for gcc_opt in -march=; do \
- $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
- -xc /dev/null > /dev/null 2>&1 && \
- break 2; \
-@@ -90,7 +90,7 @@ else \
- fi; \
- gas_abi=-Wa,-32; gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \
- while :; do \
-- for gas_opt in -Wa,-march= -Wa,-mcpu=; do \
-+ for gas_opt in -Wa,-march=; do \
- $(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \
- -o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \
- break 2; \
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c
---- linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c 2004-02-12 23:51:10.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c 2004-02-13 10:11:06.000000000 +0100
-@@ -29,6 +29,7 @@
- #include <linux/errno.h>
- #include <linux/init.h>
- #include <linux/input.h>
-+#include <linux/pm.h>
-
- void kbd_leds(unsigned char leds)
- {
-@@ -140,3 +141,46 @@ void __init kbd_init_hw(void)
- {
- printk("Dummy keyboard driver installed.\n");
- }
-+
-+
-+void panic_blink(void)
-+ {
-+ }
-+
-+
-+ int pckbd_translate(unsigned char scancode, unsigned char *keycode,
-+ char raw_mode)
-+ {
-+ return 0;
-+ }
-+
-+ char pckbd_unexpected_up(unsigned char keycode)
-+ {
-+ return 0;
-+ }
-+
-+
-+ void pckbd_leds(unsigned char leds)
-+ {
-+ }
-+
-+
-+ int pckbd_setkeycode(unsigned int scancode, unsigned int keycode)
-+ {
-+ return 0;
-+ }
-+
-+ int pckbd_getkeycode(unsigned int scancode)
-+ {
-+ return 0;
-+ }
-+
-+ void __init pckbd_init_hw(void)
-+ {
-+ }
-+
-+ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data)
-+ {
-+ return 0;
-+ }
-+
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/Makefile linux-2.4.25-rc2_q/drivers/char/Makefile
---- linux-2.4.25-rc2_org/drivers/char/Makefile 2004-02-12 23:50:40.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/char/Makefile 2004-02-13 10:11:06.000000000 +0100
-@@ -32,7 +32,7 @@ mod-subdirs := joystick ftape drm drm-4.
- list-multi :=
-
- KEYMAP =defkeymap.o
--KEYBD =pc_keyb.o
-+KEYBD =dummy_keyb.o
- CONSOLE =console.o
- SERIAL =serial.o
-
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c
---- linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c 2004-02-13 00:49:45.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c 2004-03-16 10:04:18.000000000 +0100
-@@ -511,7 +511,7 @@ static int do_write_oneword(struct map_i
- or tells us why it failed. */
- dq6 = CMD(1<<6);
- dq5 = CMD(1<<5);
-- timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */
-+ timeo = jiffies + HZ; /* setting timeout to 1ms for now */
-
- oldstatus = cfi_read(map, adr);
- status = cfi_read(map, adr);
-@@ -540,9 +540,7 @@ static int do_write_oneword(struct map_i
- oldstatus = cfi_read(map, adr);
- status = cfi_read(map, adr);
-
-- if ( (oldstatus & 0x00FF) == (status & 0x00FF) ) {
-- printk(KERN_WARNING "Warning: DQ5 raised while program operation was in progress, however operation completed OK\n" );
-- } else {
-+ if ( (oldstatus & 0x00FF) != (status & 0x00FF) ) {
- /* DQ5 is active so we can do a reset and stop the erase */
- cfi_write(map, CMD(0xF0), chip->start);
- printk(KERN_WARNING "Internal flash device timeout occurred or write operation was performed while flash was programming.\n" );
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c
---- linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c 2004-02-13 00:50:09.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c 2004-02-13 10:11:40.000000000 +0100
-@@ -86,28 +86,24 @@ static int mtd_parts_n
- #else
- static struct mtd_partition physmap_partitions[] = {
- /* Put your own partition definitions here */
--#if 0
- {
-- name: "bootROM",
-- size: 0x80000,
-+ name: "fs1",
-+ size: 28*1024*1024,
- offset: 0,
-- mask_flags: MTD_WRITEABLE, /* force read-only */
- }, {
-- name: "zImage",
-- size: 0x100000,
-+ name: "bootldr",
-+ size: 128*1024,
- offset: MTDPART_OFS_APPEND,
- mask_flags: MTD_WRITEABLE, /* force read-only */
- }, {
-- name: "ramdisk.gz",
-- size: 0x300000,
-+ name: "kernel",
-+ size: 1*1024*1024,
- offset: MTDPART_OFS_APPEND,
-- mask_flags: MTD_WRITEABLE, /* force read-only */
- }, {
-- name: "User FS",
-+ name: "fs2",
- size: MTDPART_SIZ_FULL,
- offset: MTDPART_OFS_APPEND,
- }
--#endif
- };
-
- #define NUM_PARTITIONS (sizeof(physmap_partitions)/sizeof(struct mtd_partition))
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/au1000_eth.c linux-2.4.25-rc2_q/drivers/net/au1000_eth.c
---- linux-2.4.25-rc2_org/drivers/net/au1000_eth.c 2004-02-12 23:33:59.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/net/au1000_eth.c 2004-02-13 10:06:01.000000000 +0100
-@@ -97,6 +97,7 @@ extern int get_ethernet_addr(char *ether
- extern inline void str2eaddr(unsigned char *ea, unsigned char *str);
- extern inline unsigned char str2hexnum(unsigned char c);
- extern char * __init prom_getcmdline(void);
-+extern int get_ethernet_addr_n(char *ethernet_addr, int n);
-
- /*
- * Theory of operation
-@@ -591,6 +592,99 @@ int ks8995m_status(struct net_device *de
- return 0;
- }
-
-+int ns_83847_reset(struct net_device *dev, int phy_addr)
-+ {
-+ s16 mii_control, timeout;
-+
-+ // printk("ns_reset\n");
-+ mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
-+ mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET);
-+ mdelay(1);
-+ for (timeout = 100; timeout > 0; --timeout) {
-+ mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
-+ if ((mii_control & MII_CNTL_RESET) == 0)
-+ break;
-+ mdelay(1);
-+ }
-+ if (mii_control & MII_CNTL_RESET) {
-+ printk(KERN_ERR "%s PHY reset timeout !\n", dev->name);
-+ return -1;
-+ }
-+ return 0;
-+ }
-+
-+int ns_83847_init(struct net_device *dev, int phy_addr)
-+ {
-+ s16 data;
-+ // printk("ns_init\n");
-+
-+ /* Stop auto-negotiation */
-+ // data = mdio_read(dev, phy_addr, MII_CONTROL);
-+ // mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO);
-+ // mdio_write(dev, phy_addr, 0, 0x0000);
-+ mdio_write(dev, phy_addr, MII_CONTROL, MII_CNTL_F100 /* | MII_CNTL_FDX */);
-+
-+ /* Set advertisement to 10/100 and Half/Full duplex (full capabilities) */
-+ data = mdio_read(dev, phy_addr, MII_ANADV);
-+ /* obs PAUSE bit */
-+ data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; /* MII_NWAY_T4 not sopported */ ;
-+ mdio_write(dev, phy_addr, MII_ANADV, data);
-+
-+ /* Bypass led stretching? */
-+ data = mdio_read(dev, phy_addr, MII_NS_PHYCTRL);
-+ data |= MII_NS_PHYCTRL_BP_STRETCH;
-+ mdio_write(dev, phy_addr, MII_NS_PHYCTRL, data);
-+
-+ /* Restart auto-negotiation */
-+ data = mdio_read(dev, phy_addr, MII_CONTROL);
-+ data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO;
-+ mdio_write(dev, phy_addr, MII_CONTROL, data);
-+
-+ return 0;
-+ }
-+
-+int ns_83847_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
-+ {
-+ u16 mii_data;
-+ struct au1000_private *aup;
-+
-+ if (!dev) {
-+ printk(KERN_ERR "ns_83847_status error: NULL dev\n");
-+ return -1;
-+ }
-+ aup = (struct au1000_private *) dev->priv;
-+
-+ mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS);
-+ // printk("ns_status: %04x\n", mii_data);
-+ if (mii_data & MII_STAT_LINK) {
-+ *link = 1;
-+ mii_data = mdio_read(dev, aup->phy_addr, MII_NS_PHYSTS);
-+ if (mii_data & MII_NS_PHYSTS_SPEED_10) {
-+ *speed = IF_PORT_10BASET;
-+ dev->if_port = IF_PORT_10BASET;
-+ }
-+ else {
-+ if (mii_data & MII_NS_PHYSTS_DUPLEX_FULL) {
-+ *speed = IF_PORT_100BASEFX;
-+ dev->if_port = IF_PORT_100BASEFX;
-+ }
-+ else {
-+ *speed = IF_PORT_100BASETX;
-+ dev->if_port = IF_PORT_100BASETX;
-+ }
-+ }
-+
-+ }
-+ else {
-+ *link = 0;
-+ *speed = 0;
-+ dev->if_port = IF_PORT_UNKNOWN;
-+ }
-+ return 0;
-+ }
-+
-+
-+
- #ifdef CONFIG_MIPS_BOSPORUS
- int stub_init(struct net_device *dev, int phy_addr)
- {
-@@ -616,6 +710,12 @@ stub_status(struct net_device *dev, int
- }
- #endif
-
-+struct phy_ops ns_83847_ops = {
-+ ns_83847_init,
-+ ns_83847_reset,
-+ ns_83847_status,
-+};
-+
- struct phy_ops bcm_5201_ops = {
- bcm_5201_init,
- bcm_5201_reset,
-@@ -667,6 +767,7 @@ static struct mii_chip_info {
- struct phy_ops *phy_ops;
- int dual_phy;
- } mii_chip_table[] = {
-+ {"Natsemi DP83847 PHY", 0x2000, 0x5c30, &ns_83847_ops },
- {"Broadcom BCM5201 10/100 BaseT PHY",0x0040,0x6212, &bcm_5201_ops,0},
- {"Broadcom BCM5221 10/100 BaseT PHY",0x0040,0x61e4, &bcm_5201_ops,0},
- {"Broadcom BCM5222 10/100 BaseT PHY",0x0040,0x6322, &bcm_5201_ops,1},
-@@ -868,6 +969,8 @@ static int mii_probe (struct net_device
- }
- }
- }
-+ printk(KERN_ERR "%s: Au1x No MII transceivers found!\n", dev->name);
-+ return -1;
- found:
-
- #ifdef CONFIG_MIPS_BOSPORUS
-@@ -1176,21 +1279,10 @@ au1000_probe(u32 ioaddr, int irq, int po
- switch (ioaddr) {
- case AU1000_ETH0_BASE:
- case AU1500_ETH0_BASE:
-- /* check env variables first */
- if (!get_ethernet_addr(ethaddr)) {
- memcpy(au1000_mac_addr, ethaddr, sizeof(dev->dev_addr));
- } else {
-- /* Check command line */
-- argptr = prom_getcmdline();
-- if ((pmac = strstr(argptr, "ethaddr=")) == NULL) {
-- printk(KERN_INFO "%s: No mac address found\n",
-- dev->name);
-- /* use the hard coded mac addresses */
-- } else {
-- str2eaddr(ethaddr, pmac + strlen("ethaddr="));
-- memcpy(au1000_mac_addr, ethaddr,
-- sizeof(dev->dev_addr));
-- }
-+ printk(KERN_INFO "%s: No mac address found\n", dev->name);
- }
- if (ioaddr == AU1000_ETH0_BASE)
- aup->enable = (volatile u32 *)
-@@ -1206,6 +1298,11 @@ au1000_probe(u32 ioaddr, int irq, int po
-
- case AU1000_ETH1_BASE:
- case AU1500_ETH1_BASE:
-+ if (!get_ethernet_addr_n(ethaddr, 1)) {
-+ memcpy(au1000_mac_addr, ethaddr, sizeof(dev->dev_addr));
-+ } else {
-+ printk(KERN_INFO "%s: No mac address found\n", dev->name);
-+ }
- if (ioaddr == AU1000_ETH1_BASE)
- aup->enable = (volatile u32 *)
- ((unsigned long)AU1000_MAC1_ENABLE);
-@@ -1213,7 +1310,6 @@ au1000_probe(u32 ioaddr, int irq, int po
- aup->enable = (volatile u32 *)
- ((unsigned long)AU1500_MAC1_ENABLE);
- memcpy(dev->dev_addr, au1000_mac_addr, sizeof(dev->dev_addr));
-- dev->dev_addr[4] += 0x10;
- setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
- aup->mac_id = 1;
- au_macs[1] = aup;
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/au1000_eth.h linux-2.4.25-rc2_q/drivers/net/au1000_eth.h
---- linux-2.4.25-rc2_org/drivers/net/au1000_eth.h 2004-02-12 23:33:54.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/net/au1000_eth.h 2004-02-13 10:06:01.000000000 +0100
-@@ -86,6 +86,28 @@
- #define MII_STAT_CAN_TX_FDX 0x4000
- #define MII_STAT_CAN_T4 0x8000
-
-+/* mii registers for NS 83847 */
-+#define MII_NS_PHYSTS 0x10
-+#define MII_NS_FCSCR 0x14
-+#define MII_NS_RECR 0x15
-+#define MII_NS_PCSR 0x16
-+#define MII_NS_PHYCTRL 0x19
-+#define MII_NS_10BTSCR 0x1a
-+#define MII_NS_CDCTRL 0x1b
-+
-+/* MII_NS_PHYSTS bits */
-+#define MII_NS_PHYSTS_LINK (1)
-+#define MII_NS_PHYSTS_SPEED_10 (1<<1)
-+#define MII_NS_PHYSTS_DUPLEX_FULL (1<<2)
-+
-+/* MII_NS_PHYCTRL bits */
-+#define MII_NS_PHYCTRL_BP_STRETCH (1<<8)
-+
-+/* MII_NS_CDCTRL bits */
-+#define MII_NS_CDCTRL_CD_ENABLE (1<<15)
-+#define MII_NS_CDCTRL_RISETIME (1<<11)
-+#define MII_NS_CDCTRL_FALLTIME (1<<9)
-+
-
- #define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */
- #define MII_ID1_MODEL 0x03F0 /* model number */
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/natsemi.c linux-2.4.25-rc2_q/drivers/net/natsemi.c
---- linux-2.4.25-rc2_org/drivers/net/natsemi.c 2004-02-12 23:29:19.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/net/natsemi.c 2004-04-22 09:28:51.000000000 +0200
-@@ -773,7 +773,11 @@ static int __devinit natsemi_probe1 (str
- goto err_ioremap;
- }
-
-- /* Work around the dropped serial bit. */
-+#ifdef __mips__
-+ if (get_ethernet_addr_n(dev->dev_addr, 2)) {
-+ printk(KERN_INFO "%s: No mac address found\n", dev->name);
-+ }
-+#else
- prev_eedata = eeprom_read(ioaddr, 6);
- for (i = 0; i < 3; i++) {
- int eedata = eeprom_read(ioaddr, i + 7);
-@@ -781,6 +785,7 @@ static int __devinit natsemi_probe1 (str
- dev->dev_addr[i*2+1] = eedata >> 7;
- prev_eedata = eedata;
- }
-+#endif
-
- dev->base_addr = ioaddr;
- dev->irq = irq;
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h
---- linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h 2004-02-12 23:47:43.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h 2004-02-13 10:13:40.000000000 +0100
-@@ -302,9 +302,9 @@ typedef struct hermes_response {
- #define hermes_read_reg(hw, off) ((hw)->io_space ? \
- inw((hw)->iobase + ( (off) << (hw)->reg_spacing )) : \
- readw((hw)->iobase + ( (off) << (hw)->reg_spacing )))
--#define hermes_write_reg(hw, off, val) ((hw)->io_space ? \
-- outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )) : \
-- writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )))
-+#define hermes_write_reg(hw, off, val) { if((hw)->io_space) \
-+ outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )); else \
-+ writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ));}
-
- #define hermes_read_regn(hw, name) (hermes_read_reg((hw), HERMES_##name))
- #define hermes_write_regn(hw, name, val) (hermes_write_reg((hw), HERMES_##name, (val)))
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/au1000.h linux-2.4.25-rc2_q/include/asm-mips/au1000.h
---- linux-2.4.25-rc2_org/include/asm-mips/au1000.h 2004-02-12 23:06:31.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/asm-mips/au1000.h 2004-02-13 10:41:49.000000000 +0100
-@@ -283,14 +283,14 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
- #define INTC_INT_HIGH_AND_LOW_LEVEL 0x7
-
- /* Interrupt Numbers */
--#define AU1000_UART0_INT 0
-+#define AU1000_UART0_INT 3
- #define AU1000_UART1_INT 1 /* au1000 */
- #define AU1000_UART2_INT 2 /* au1000 */
-
- #define AU1000_PCI_INTA 1 /* au1500 */
- #define AU1000_PCI_INTB 2 /* au1500 */
-
--#define AU1000_UART3_INT 3
-+#define AU1000_UART3_INT 0
-
- #define AU1000_SSI0_INT 4 /* au1000 */
- #define AU1000_SSI1_INT 5 /* au1000 */
-@@ -693,12 +693,12 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
-
-
- /* UARTS 0-3 */
--#define UART0_ADDR 0xB1100000
-+#define UART0_ADDR 0xB1400000
- #define UART1_ADDR 0xB1200000
- #define UART2_ADDR 0xB1300000
--#define UART3_ADDR 0xB1400000
-+#define UART3_ADDR 0xB1100000
- #define UART_BASE UART0_ADDR
--#define UART_DEBUG_BASE UART3_ADDR
-+#define UART_DEBUG_BASE UART0_ADDR
-
- #define UART_RX 0 /* Receive buffer */
- #define UART_TX 4 /* Transmit buffer */
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/page.h linux-2.4.25-rc2_q/include/asm-mips/page.h
---- linux-2.4.25-rc2_org/include/asm-mips/page.h 2004-02-12 23:06:14.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/asm-mips/page.h 2004-03-23 14:18:38.000000000 +0100
-@@ -13,7 +13,6 @@
- #include <linux/config.h>
- #include <asm/break.h>
-
--#ifdef __KERNEL__
-
- /*
- * PAGE_SHIFT determines the page size
-@@ -30,6 +29,7 @@
- #define PAGE_SIZE (1L << PAGE_SHIFT)
- #define PAGE_MASK (~(PAGE_SIZE-1))
-
-+#ifdef __KERNEL__
- #ifndef __ASSEMBLY__
-
- #include <asm/cacheflush.h>
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/wbflush.h linux-2.4.25-rc2_q/include/asm-mips/wbflush.h
---- linux-2.4.25-rc2_org/include/asm-mips/wbflush.h 2004-02-12 23:06:33.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/asm-mips/wbflush.h 2004-02-13 20:42:57.000000000 +0100
-@@ -15,8 +15,11 @@
-
- #ifdef CONFIG_CPU_HAS_WB
-
--extern void (*__wbflush)(void);
--extern void wbflush_setup(void);
-+//extern void (*__wbflush)(void);
-+//extern void wbflush_setup(void);
-+
-+
-+#define __wbflush() { __asm__ volatile ("sync"); }
-
- #define wbflush() \
- do { \
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/cs_types.h linux-2.4.25-rc2_q/include/pcmcia/cs_types.h
---- linux-2.4.25-rc2_org/include/pcmcia/cs_types.h 2004-02-12 23:13:05.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/pcmcia/cs_types.h 2004-02-13 10:15:10.000000000 +0100
-@@ -37,6 +37,7 @@
- #endif
-
- #if defined(__arm__) || defined(__mips__)
-+//obs jp: on mips, "typedef unsigned long long ioaddr_t;" may be needed to support cardbus
- typedef u_int ioaddr_t;
- #else
- typedef u_short ioaddr_t;
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/ss.h linux-2.4.25-rc2_q/include/pcmcia/ss.h
---- linux-2.4.25-rc2_org/include/pcmcia/ss.h 2004-02-12 23:13:02.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/pcmcia/ss.h 2004-02-13 10:15:32.000000000 +0100
-@@ -112,7 +112,7 @@ typedef struct pccard_mem_map {
- u_char map;
- u_char flags;
- u_short speed;
-- u_long sys_start, sys_stop;
-+ ioaddr_t sys_start, sys_stop;
- u_int card_start;
- } pccard_mem_map;
-
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/init/do_mounts.c linux-2.4.25-rc2_q/init/do_mounts.c
---- linux-2.4.25-rc2_org/init/do_mounts.c 2004-02-12 22:59:08.000000000 +0100
-+++ linux-2.4.25-rc2_q/init/do_mounts.c 2004-02-13 10:16:02.000000000 +0100
-@@ -760,8 +760,6 @@ static void __init devfs_make_root(char
- static void __init mount_root(void)
- {
- #ifdef CONFIG_ROOT_NFS
-- if (MAJOR(ROOT_DEV) == NFS_MAJOR
-- && MINOR(ROOT_DEV) == NFS_MINOR) {
- if (mount_nfs_root()) {
- sys_chdir("/root");
- ROOT_DEV = current->fs->pwdmnt->mnt_sb->s_dev;
-@@ -770,7 +768,6 @@ static void __init mount_root(void)
- }
- printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n");
- ROOT_DEV = MKDEV(FLOPPY_MAJOR, 0);
-- }
- #endif
- devfs_make_root(root_device_name);
- create_dev("/dev/root", ROOT_DEV, root_device_name);
-
+++ /dev/null
-diff -Naur linux-2.4.26-q5.org/arch/mips/au1000/common/clocks.c linux-2.4.26-q5/arch/mips/au1000/common/clocks.c
---- linux-2.4.26-q5.org/arch/mips/au1000/common/clocks.c 2003-08-25 07:44:39.000000000 -0400
-+++ linux-2.4.26-q5/arch/mips/au1000/common/clocks.c 2005-06-23 02:52:03.390000000 -0400
-@@ -85,9 +85,8 @@
- lcd_clock = sys_busclk / 4;
-
- if (lcd_clock > 50000) /* Epson MAX */
-- printk(__FUNCTION__
-- ": warning: LCD clock too high (%d KHz)\n",
-- lcd_clock);
-+ printk("%s: warning: LCD clock too high (%d KHz)\n",
-+ __FUNCTION__, lcd_clock);
- }
-
- unsigned int get_au1x00_lcd_clock(void)
---- linux-2.4.26-q5.org/arch/mips/kernel/time.c 2004-02-18 08:36:30.000000000 -0500
-+++ linux-2.4.26-q5/arch/mips/kernel/time.c 2005-06-23 03:13:07.720000000 -0400
-@@ -25,6 +25,7 @@
- #include <linux/interrupt.h>
- #include <linux/module.h>
-
-+#include <asm/compiler.h>
- #include <asm/bootinfo.h>
- #include <asm/cpu.h>
- #include <asm/time.h>
-@@ -242,7 +243,7 @@
- __asm__("multu %1,%2"
- : "=h" (res)
- : "r" (count), "r" (sll32_usecs_per_cycle)
-- : "lo", "accum");
-+ : "lo", GCC_REG_ACCUM);
-
- /*
- * Due to possible jiffies inconsistencies, we need to check
-@@ -297,7 +298,7 @@
- __asm__("multu %1,%2"
- : "=h" (res)
- : "r" (count), "r" (quotient)
-- : "lo", "accum");
-+ : "lo", GCC_REG_ACCUM);
-
- /*
- * Due to possible jiffies inconsistencies, we need to check
-@@ -339,7 +340,7 @@
- : "r" (timerhi), "m" (timerlo),
- "r" (tmp), "r" (USECS_PER_JIFFY),
- "r" (USECS_PER_JIFFY_FRAC)
-- : "hi", "lo", "accum");
-+ : "hi", "lo", GCC_REG_ACCUM);
- cached_quotient = quotient;
- }
- }
-@@ -353,7 +354,7 @@
- __asm__("multu %1,%2"
- : "=h" (res)
- : "r" (count), "r" (quotient)
-- : "lo", "accum");
-+ : "lo", GCC_REG_ACCUM);
-
- /*
- * Due to possible jiffies inconsistencies, we need to checkdiff -Naur linux-2.4.26-q5.org/include/asm-mips/compiler.h linux-2.4.26-q5/include/asm-mips/compiler.h
---- linux-2.4.26-q5.org/include/asm-mips/compiler.h 1969-12-31 19:00:00.000000000 -0500
-+++ linux-2.4.26-q5/include/asm-mips/compiler.h 2005-06-23 02:52:25.000000000 -0400
-@@ -0,0 +1,17 @@
-+/*
-+ * Copyright (C) 2004 Maciej W. Rozycki
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ */
-+#ifndef _ASM_COMPILER_H
-+#define _ASM_COMPILER_H
-+
-+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)
-+#define GCC_REG_ACCUM "$0"
-+#else
-+#define GCC_REG_ACCUM "accum"
-+#endif
-+
-+#endif /* _ASM_COMPILER_H */
+++ /dev/null
---- linux-2.4.29/arch/mips/Makefile.orig 2005-03-08 23:24:05.000000000 -0700
-+++ linux-2.4.29/arch/mips/Makefile 2005-03-08 23:27:37.000000000 -0700
-@@ -17,16 +17,16 @@
- # Select the object file format to substitute into the linker script.
- #
- ifdef CONFIG_CPU_LITTLE_ENDIAN
--tool-prefix = mipsel-linux-
-+#tool-prefix = mipsel-linux-
- ld-emul = elf32ltsmip
- else
--tool-prefix = mips-linux-
-+#tool-prefix = mips-linux-
- ld-emul = elf32btsmip
- endif
-
--ifdef CONFIG_CROSSCOMPILE
--CROSS_COMPILE = $(tool-prefix)
--endif
-+#ifdef CONFIG_CROSSCOMPILE
-+#CROSS_COMPILE = $(tool-prefix)
-+#endif
-
- MAKEBOOT = $(MAKE) -C arch/$(ARCH)/boot
-
+++ /dev/null
---- linux/Makefile.orig 2004-08-18 14:17:14.000000000 -0600
-+++ linux/Makefile 2004-08-18 14:17:54.000000000 -0600
-@@ -1,7 +1,7 @@
- VERSION = 2
- PATCHLEVEL = 4
- SUBLEVEL = 26
--EXTRAVERSION =
-+EXTRAVERSION =-q5
-
- KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
-
+++ /dev/null
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/Makefile 2004-02-13 01:03:35.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/Makefile 2004-02-13 10:04:07.000000000 +0100
-@@ -16,7 +16,7 @@ all: au1000.o
-
- O_TARGET := au1000.o
-
--export-objs = prom.o clocks.o power.o usbdev.o
-+export-objs = prom.o clocks.o power.o usbdev.o setup.o
-
- obj-y := prom.o int-handler.o dma.o irq.o puts.o time.o reset.o \
- clocks.o power.o setup.o sleeper.o
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/prom.c 2004-02-13 01:03:32.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/prom.c 2004-02-13 10:07:12.000000000 +0100
-@@ -81,7 +81,7 @@ void prom_init_cmdline(void)
- }
-
-
--char *prom_getenv(char *envname)
-+char *prom_getenv_n(char *envname, int n)
- {
- /*
- * Return a pointer to the given environment variable.
-@@ -89,19 +89,24 @@ char *prom_getenv(char *envname)
- */
-
- t_env_var *env = (t_env_var *)prom_envp;
-- int i;
-+ int i, j=0;
-
- i = strlen(envname);
-
- while(env->name) {
- if(strncmp(envname, env->name, i) == 0) {
-- return(env->name + strlen(envname) + 1);
-+ if(j++ == n) return(env->name + strlen(envname) + 1);
- }
- env++;
- }
- return(NULL);
- }
-
-+char *prom_getenv(char *envname)
-+{
-+ return prom_getenv_n(envname, 0);
-+}
-+
- inline unsigned char str2hexnum(unsigned char c)
- {
- if(c >= '0' && c <= '9')
-@@ -128,18 +133,18 @@ inline void str2eaddr(unsigned char *ea,
- }
- }
-
--int get_ethernet_addr(char *ethernet_addr)
-+int get_ethernet_addr_n(char *ethernet_addr, int n)
- {
- char *ethaddr_str;
-
-- ethaddr_str = prom_getenv("ethaddr");
-+ ethaddr_str = prom_getenv_n("ethaddr", n);
- if (!ethaddr_str) {
- printk("ethaddr not set in boot prom\n");
- return -1;
- }
- str2eaddr(ethernet_addr, ethaddr_str);
-
--#if 0
-+#if 1
- {
- int i;
-
-@@ -153,7 +158,13 @@ int get_ethernet_addr(char *ethernet_add
- return 0;
- }
-
-+int get_ethernet_addr(char *ethernet_addr)
-+{
-+ return get_ethernet_addr_n(ethernet_addr, 0);
-+}
-+
- void prom_free_prom_memory (void) {}
-+EXPORT_SYMBOL(get_ethernet_addr_n);
- EXPORT_SYMBOL(prom_getcmdline);
- EXPORT_SYMBOL(get_ethernet_addr);
- EXPORT_SYMBOL(str2eaddr);
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c
---- linux-2.4.25-rc2_org/arch/mips/au1000/common/setup.c 2004-02-13 01:03:31.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/au1000/common/setup.c 2004-02-13 10:04:07.000000000 +0100
-@@ -57,6 +57,7 @@ extern struct ide_ops *ide_ops;
- #endif
-
- extern struct rtc_ops no_rtc_ops;
-+void (*__wbflush) (void);
- extern char * __init prom_getcmdline(void);
- extern void __init board_setup(void);
- extern void au1000_restart(char *);
-@@ -71,6 +72,11 @@ static phys_t au1500_fixup_bigphys_addr(
- extern void au1xxx_time_init(void);
- extern void au1xxx_timer_setup(void);
-
-+void au1500_wbflush(void)
-+{
-+ __asm__ volatile ("sync");
-+}
-+
- void __init au1x00_setup(void)
- {
- char *argptr;
-@@ -89,6 +95,8 @@ void __init au1x00_setup(void)
- }
- #endif
-
-+ __wbflush = au1500_wbflush;
-+
- #ifdef CONFIG_FB_AU1100
- if ((argptr = strstr(argptr, "video=")) == NULL) {
- argptr = prom_getcmdline();
-@@ -215,3 +223,6 @@ static phys_t au1500_fixup_bigphys_addr(
- return phys_addr;
- }
- #endif
-+
-+EXPORT_SYMBOL(__wbflush);
-+
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/kernel/head.S linux-2.4.25-rc2_q/arch/mips/kernel/head.S
---- linux-2.4.25-rc2_org/arch/mips/kernel/head.S 2004-02-13 01:02:42.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/kernel/head.S 2004-02-13 10:07:43.000000000 +0100
-@@ -33,7 +33,9 @@
- * Reserved space for exception handlers.
- * Necessary for machines which link their kernels at KSEG0.
- */
-- .fill 0x400
-+ j kernel_entry
-+ nop
-+ .org 0x400
-
- /* The following two symbols are used for kernel profiling. */
- EXPORT(stext)
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/arch/mips/Makefile linux-2.4.25-rc2_q/arch/mips/Makefile
---- linux-2.4.25-rc2_org/arch/mips/Makefile 2004-02-13 01:01:00.000000000 +0100
-+++ linux-2.4.25-rc2_q/arch/mips/Makefile 2004-04-09 10:40:09.000000000 +0200
-@@ -69,13 +69,13 @@ endif
- set_gccflags = $(shell \
- while :; do \
- cpu=$(1); isa=-$(2); \
-- for gcc_opt in -march= -mcpu=; do \
-+ for gcc_opt in -march=; do \
- $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
- -xc /dev/null > /dev/null 2>&1 && \
- break 2; \
- done; \
- cpu=$(3); isa=-$(4); \
-- for gcc_opt in -march= -mcpu=; do \
-+ for gcc_opt in -march=; do \
- $(CC) $$gcc_opt$$cpu $$isa -S -o /dev/null \
- -xc /dev/null > /dev/null 2>&1 && \
- break 2; \
-@@ -90,7 +90,7 @@ else \
- fi; \
- gas_abi=-Wa,-32; gas_cpu=$$cpu; gas_isa=-Wa,$$isa; \
- while :; do \
-- for gas_opt in -Wa,-march= -Wa,-mcpu=; do \
-+ for gas_opt in -Wa,-march=; do \
- $(CC) $$gas_abi $$gas_opt$$cpu $$gas_isa -Wa,-Z -c \
- -o /dev/null -xassembler /dev/null > /dev/null 2>&1 && \
- break 2; \
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c
---- linux-2.4.25-rc2_org/drivers/char/dummy_keyb.c 2004-02-12 23:51:10.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/char/dummy_keyb.c 2004-02-13 10:11:06.000000000 +0100
-@@ -29,6 +29,7 @@
- #include <linux/errno.h>
- #include <linux/init.h>
- #include <linux/input.h>
-+#include <linux/pm.h>
-
- void kbd_leds(unsigned char leds)
- {
-@@ -140,3 +141,46 @@ void __init kbd_init_hw(void)
- {
- printk("Dummy keyboard driver installed.\n");
- }
-+
-+
-+void panic_blink(void)
-+ {
-+ }
-+
-+
-+ int pckbd_translate(unsigned char scancode, unsigned char *keycode,
-+ char raw_mode)
-+ {
-+ return 0;
-+ }
-+
-+ char pckbd_unexpected_up(unsigned char keycode)
-+ {
-+ return 0;
-+ }
-+
-+
-+ void pckbd_leds(unsigned char leds)
-+ {
-+ }
-+
-+
-+ int pckbd_setkeycode(unsigned int scancode, unsigned int keycode)
-+ {
-+ return 0;
-+ }
-+
-+ int pckbd_getkeycode(unsigned int scancode)
-+ {
-+ return 0;
-+ }
-+
-+ void __init pckbd_init_hw(void)
-+ {
-+ }
-+
-+ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data)
-+ {
-+ return 0;
-+ }
-+
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/char/Makefile linux-2.4.25-rc2_q/drivers/char/Makefile
---- linux-2.4.25-rc2_org/drivers/char/Makefile 2004-02-12 23:50:40.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/char/Makefile 2004-02-13 10:11:06.000000000 +0100
-@@ -32,7 +32,7 @@ mod-subdirs := joystick ftape drm drm-4.
- list-multi :=
-
- KEYMAP =defkeymap.o
--KEYBD =pc_keyb.o
-+KEYBD =dummy_keyb.o
- CONSOLE =console.o
- SERIAL =serial.o
-
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c
---- linux-2.4.25-rc2_org/drivers/mtd/chips/cfi_cmdset_0002.c 2004-02-13 00:49:45.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/mtd/chips/cfi_cmdset_0002.c 2004-03-16 10:04:18.000000000 +0100
-@@ -511,7 +511,7 @@ static int do_write_oneword(struct map_i
- or tells us why it failed. */
- dq6 = CMD(1<<6);
- dq5 = CMD(1<<5);
-- timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */
-+ timeo = jiffies + HZ; /* setting timeout to 1ms for now */
-
- oldstatus = cfi_read(map, adr);
- status = cfi_read(map, adr);
-@@ -540,9 +540,7 @@ static int do_write_oneword(struct map_i
- oldstatus = cfi_read(map, adr);
- status = cfi_read(map, adr);
-
-- if ( (oldstatus & 0x00FF) == (status & 0x00FF) ) {
-- printk(KERN_WARNING "Warning: DQ5 raised while program operation was in progress, however operation completed OK\n" );
-- } else {
-+ if ( (oldstatus & 0x00FF) != (status & 0x00FF) ) {
- /* DQ5 is active so we can do a reset and stop the erase */
- cfi_write(map, CMD(0xF0), chip->start);
- printk(KERN_WARNING "Internal flash device timeout occurred or write operation was performed while flash was programming.\n" );
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c
---- linux-2.4.25-rc2_org/drivers/mtd/maps/physmap.c 2004-02-13 00:50:09.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/mtd/maps/physmap.c 2004-02-13 10:11:40.000000000 +0100
-@@ -86,28 +86,24 @@ static int mtd_parts_n
- #else
- static struct mtd_partition physmap_partitions[] = {
- /* Put your own partition definitions here */
--#if 0
- {
-- name: "bootROM",
-- size: 0x80000,
-+ name: "fs1",
-+ size: 28*1024*1024,
- offset: 0,
-- mask_flags: MTD_WRITEABLE, /* force read-only */
- }, {
-- name: "zImage",
-- size: 0x100000,
-+ name: "bootldr",
-+ size: 128*1024,
- offset: MTDPART_OFS_APPEND,
- mask_flags: MTD_WRITEABLE, /* force read-only */
- }, {
-- name: "ramdisk.gz",
-- size: 0x300000,
-+ name: "kernel",
-+ size: 1*1024*1024,
- offset: MTDPART_OFS_APPEND,
-- mask_flags: MTD_WRITEABLE, /* force read-only */
- }, {
-- name: "User FS",
-+ name: "fs2",
- size: MTDPART_SIZ_FULL,
- offset: MTDPART_OFS_APPEND,
- }
--#endif
- };
-
- #define NUM_PARTITIONS (sizeof(physmap_partitions)/sizeof(struct mtd_partition))
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/natsemi.c linux-2.4.25-rc2_q/drivers/net/natsemi.c
---- linux-2.4.25-rc2_org/drivers/net/natsemi.c 2004-02-12 23:29:19.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/net/natsemi.c 2004-04-22 09:28:51.000000000 +0200
-@@ -773,7 +773,11 @@ static int __devinit natsemi_probe1 (str
- goto err_ioremap;
- }
-
-- /* Work around the dropped serial bit. */
-+#ifdef __mips__
-+ if (get_ethernet_addr_n(dev->dev_addr, 2)) {
-+ printk(KERN_INFO "%s: No mac address found\n", dev->name);
-+ }
-+#else
- prev_eedata = eeprom_read(ioaddr, 6);
- for (i = 0; i < 3; i++) {
- int eedata = eeprom_read(ioaddr, i + 7);
-@@ -781,6 +785,7 @@ static int __devinit natsemi_probe1 (str
- dev->dev_addr[i*2+1] = eedata >> 7;
- prev_eedata = eedata;
- }
-+#endif
-
- dev->base_addr = ioaddr;
- dev->irq = irq;
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h
---- linux-2.4.25-rc2_org/drivers/net/wireless/hermes.h 2004-02-12 23:47:43.000000000 +0100
-+++ linux-2.4.25-rc2_q/drivers/net/wireless/hermes.h 2004-02-13 10:13:40.000000000 +0100
-@@ -302,9 +302,9 @@ typedef struct hermes_response {
- #define hermes_read_reg(hw, off) ((hw)->io_space ? \
- inw((hw)->iobase + ( (off) << (hw)->reg_spacing )) : \
- readw((hw)->iobase + ( (off) << (hw)->reg_spacing )))
--#define hermes_write_reg(hw, off, val) ((hw)->io_space ? \
-- outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )) : \
-- writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )))
-+#define hermes_write_reg(hw, off, val) { if((hw)->io_space) \
-+ outw_p((val), (hw)->iobase + ( (off) << (hw)->reg_spacing )); else \
-+ writew((val), (hw)->iobase + ( (off) << (hw)->reg_spacing ));}
-
- #define hermes_read_regn(hw, name) (hermes_read_reg((hw), HERMES_##name))
- #define hermes_write_regn(hw, name, val) (hermes_write_reg((hw), HERMES_##name, (val)))
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/page.h linux-2.4.25-rc2_q/include/asm-mips/page.h
---- linux-2.4.25-rc2_org/include/asm-mips/page.h 2004-02-12 23:06:14.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/asm-mips/page.h 2004-03-23 14:18:38.000000000 +0100
-@@ -13,7 +13,6 @@
- #include <linux/config.h>
- #include <asm/break.h>
-
--#ifdef __KERNEL__
-
- /*
- * PAGE_SHIFT determines the page size
-@@ -30,6 +29,7 @@
- #define PAGE_SIZE (1L << PAGE_SHIFT)
- #define PAGE_MASK (~(PAGE_SIZE-1))
-
-+#ifdef __KERNEL__
- #ifndef __ASSEMBLY__
-
- #include <asm/cacheflush.h>
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/asm-mips/wbflush.h linux-2.4.25-rc2_q/include/asm-mips/wbflush.h
---- linux-2.4.25-rc2_org/include/asm-mips/wbflush.h 2004-02-12 23:06:33.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/asm-mips/wbflush.h 2004-02-13 20:42:57.000000000 +0100
-@@ -15,8 +15,11 @@
-
- #ifdef CONFIG_CPU_HAS_WB
-
--extern void (*__wbflush)(void);
--extern void wbflush_setup(void);
-+//extern void (*__wbflush)(void);
-+//extern void wbflush_setup(void);
-+
-+
-+#define __wbflush() { __asm__ volatile ("sync"); }
-
- #define wbflush() \
- do { \
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/cs_types.h linux-2.4.25-rc2_q/include/pcmcia/cs_types.h
---- linux-2.4.25-rc2_org/include/pcmcia/cs_types.h 2004-02-12 23:13:05.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/pcmcia/cs_types.h 2004-02-13 10:15:10.000000000 +0100
-@@ -37,6 +37,7 @@
- #endif
-
- #if defined(__arm__) || defined(__mips__)
-+//obs jp: on mips, "typedef unsigned long long ioaddr_t;" may be needed to support cardbus
- typedef u_int ioaddr_t;
- #else
- typedef u_short ioaddr_t;
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/include/pcmcia/ss.h linux-2.4.25-rc2_q/include/pcmcia/ss.h
---- linux-2.4.25-rc2_org/include/pcmcia/ss.h 2004-02-12 23:13:02.000000000 +0100
-+++ linux-2.4.25-rc2_q/include/pcmcia/ss.h 2004-02-13 10:15:32.000000000 +0100
-@@ -112,7 +112,7 @@ typedef struct pccard_mem_map {
- u_char map;
- u_char flags;
- u_short speed;
-- u_long sys_start, sys_stop;
-+ ioaddr_t sys_start, sys_stop;
- u_int card_start;
- } pccard_mem_map;
-
-diff -Naur -p -X do_not_diff -I '\$Id' -I '@(#)' linux-2.4.25-rc2_org/init/do_mounts.c linux-2.4.25-rc2_q/init/do_mounts.c
---- linux-2.4.25-rc2_org/init/do_mounts.c 2004-02-12 22:59:08.000000000 +0100
-+++ linux-2.4.25-rc2_q/init/do_mounts.c 2004-02-13 10:16:02.000000000 +0100
-@@ -760,8 +760,6 @@ static void __init devfs_make_root(char
- static void __init mount_root(void)
- {
- #ifdef CONFIG_ROOT_NFS
-- if (MAJOR(ROOT_DEV) == NFS_MAJOR
-- && MINOR(ROOT_DEV) == NFS_MINOR) {
- if (mount_nfs_root()) {
- sys_chdir("/root");
- ROOT_DEV = current->fs->pwdmnt->mnt_sb->s_dev;
-@@ -770,7 +768,6 @@ static void __init mount_root(void)
- }
- printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n");
- ROOT_DEV = MKDEV(FLOPPY_MAJOR, 0);
-- }
- #endif
- devfs_make_root(root_device_name);
- create_dev("/dev/root", ROOT_DEV, root_device_name);
-
+++ /dev/null
---- linux-2.4.29/arch/mips/Makefile.orig 2005-03-08 23:24:05.000000000 -0700
-+++ linux-2.4.29/arch/mips/Makefile 2005-03-08 23:27:37.000000000 -0700
-@@ -17,16 +17,16 @@
- # Select the object file format to substitute into the linker script.
- #
- ifdef CONFIG_CPU_LITTLE_ENDIAN
--tool-prefix = mipsel-linux-
-+#tool-prefix = mipsel-linux-
- ld-emul = elf32ltsmip
- else
--tool-prefix = mips-linux-
-+#tool-prefix = mips-linux-
- ld-emul = elf32btsmip
- endif
-
--ifdef CONFIG_CROSSCOMPILE
--CROSS_COMPILE = $(tool-prefix)
--endif
-+#ifdef CONFIG_CROSSCOMPILE
-+#CROSS_COMPILE = $(tool-prefix)
-+#endif
-
- MAKEBOOT = $(MAKE) -C arch/$(ARCH)/boot
-
+++ /dev/null
---- linux/Makefile.orig 2004-08-18 14:17:14.000000000 -0600
-+++ linux/Makefile 2004-08-18 14:17:54.000000000 -0600
-@@ -1,7 +1,7 @@
- VERSION = 2
- PATCHLEVEL = 4
- SUBLEVEL = 29
--EXTRAVERSION =
-+EXTRAVERSION =-q5
-
- KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
-
+++ /dev/null
-diff -Naur linux-2.4.31.org/arch/mips/Makefile linux-2.4.31/arch/mips/Makefile
---- linux-2.4.31.org/arch/mips/Makefile 2005-01-19 09:09:26.000000000 -0500
-+++ linux-2.4.31/arch/mips/Makefile 2005-09-10 17:29:44.000000000 -0400
-@@ -241,6 +241,16 @@
- endif
-
- #
-+# jp-embedded Q5 board
-+#
-+ifdef CONFIG_MIPS_Q5
-+LIBS += arch/mips/jp-embedded/q5/q5.o \
-+ arch/mips/au1000/common/au1000.o
-+SUBDIRS += arch/mips/jp-embedded/q5 arch/mips/au1000/common
-+LOADADDR := 0x80100000
-+endif
-+
-+#
- # Au1x00 (AMD/Alchemy) eval boards
- #
- ifdef CONFIG_MIPS_DB1000
-diff -Naur linux-2.4.31.org/arch/mips/au1000/common/pci_fixup.c linux-2.4.31/arch/mips/au1000/common/pci_fixup.c
---- linux-2.4.31.org/arch/mips/au1000/common/pci_fixup.c 2005-01-19 09:09:26.000000000 -0500
-+++ linux-2.4.31/arch/mips/au1000/common/pci_fixup.c 2005-09-10 17:47:29.000000000 -0400
-@@ -101,7 +101,7 @@
-
- void __init pcibios_fixup_irqs(void)
- {
--#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
-+#if defined( CONFIG_MIPS_PB1500 ) || defined( CONFIG_MIPS_PB1550 )
- unsigned int slot;
- unsigned char pin;
- struct pci_dev *dev;
-diff -Naur linux-2.4.31.org/arch/mips/config-shared.in linux-2.4.31/arch/mips/config-shared.in
---- linux-2.4.31.org/arch/mips/config-shared.in 2005-01-19 09:09:27.000000000 -0500
-+++ linux-2.4.31/arch/mips/config-shared.in 2005-08-23 00:30:32.000000000 -0400
-@@ -31,6 +31,7 @@
- dep_bool 'Support for Alchemy PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32
- dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32
- dep_bool 'Support for Alchemy PB1550 board' CONFIG_MIPS_PB1550 $CONFIG_MIPS32
-+dep_bool 'Support for jp-embedded Q5 board' CONFIG_MIPS_Q5 $CONFIG_MIPS32
- dep_bool 'Support for MyCable XXS1500 board' CONFIG_MIPS_XXS1500 $CONFIG_MIPS32
- dep_bool 'Support for 4G Systems MTX-1 board' CONFIG_MIPS_MTX1 $CONFIG_MIPS32
- dep_bool 'Support for Cogent CSB250 board' CONFIG_COGENT_CSB250 $CONFIG_MIPS32
-@@ -277,6 +278,12 @@
- define_bool CONFIG_NONCOHERENT_IO y
- define_bool CONFIG_PC_KEYB y
- fi
-+if [ "$CONFIG_MIPS_Q5" = "y" ]; then
-+ define_bool CONFIG_SOC_AU1X00 y
-+ define_bool CONFIG_SOC_AU1500 y
-+ define_bool CONFIG_NONCOHERENT_IO y
-+ define_bool CONFIG_PC_KEYB y
-+fi
- if [ "$CONFIG_MIPS_DB1000" = "y" ]; then
- define_bool CONFIG_SOC_AU1X00 y
- define_bool CONFIG_SOC_AU1000 y
-@@ -729,6 +736,7 @@
- "$CONFIG_MIPS_PB1000" = "y" -o \
- "$CONFIG_MIPS_PB1100" = "y" -o \
- "$CONFIG_MIPS_PB1500" = "y" -o \
-+ "$CONFIG_MIPS_Q5" = "y" -o \
- "$CONFIG_NEC_OSPREY" = "y" -o \
- "$CONFIG_NEC_EAGLE" = "y" -o \
- "$CONFIG_NINO" = "y" -o \
-diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/Makefile linux-2.4.31/arch/mips/jp-embedded/q5/Makefile
---- linux-2.4.31.org/arch/mips/jp-embedded/q5/Makefile 1969-12-31 19:00:00.000000000 -0500
-+++ linux-2.4.31/arch/mips/jp-embedded/q5/Makefile 2005-09-10 16:46:20.000000000 -0400
-@@ -0,0 +1,9 @@
-+USE_STANDARD_AS_RULE := true
-+
-+O_TARGET := q5.o
-+
-+export-objs = init.o
-+
-+obj-y := init.o board_setup.o irqmap.o
-+
-+include $(TOPDIR)/Rules.make
-diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/board_setup.c linux-2.4.31/arch/mips/jp-embedded/q5/board_setup.c
---- linux-2.4.31.org/arch/mips/jp-embedded/q5/board_setup.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-2.4.31/arch/mips/jp-embedded/q5/board_setup.c 2005-08-30 14:46:21.000000000 -0400
-@@ -0,0 +1,97 @@
-+/*
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ * jp-embedded Q5 board setup.
-+ *
-+ * Author: jp@jp-embedded.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/ioport.h>
-+#include <linux/mm.h>
-+#include <linux/console.h>
-+#include <linux/mc146818rtc.h>
-+#include <linux/delay.h>
-+
-+#include <asm/cpu.h>
-+#include <asm/bootinfo.h>
-+#include <asm/irq.h>
-+#include <asm/keyboard.h>
-+#include <asm/mipsregs.h>
-+#include <asm/reboot.h>
-+#include <asm/pgtable.h>
-+#include <asm/au1000.h>
-+#include <asm/pb1500.h>
-+
-+#ifdef CONFIG_USB_OHCI
-+// Enable the workaround for the OHCI DoneHead
-+// register corruption problem.
-+#define CONFIG_AU1000_OHCI_FIX
-+#endif
-+
-+#ifdef CONFIG_RTC
-+extern struct rtc_ops pb1500_rtc_ops;
-+#endif
-+
-+void board_reset (void)
-+{
-+ /* Hit BCSR.SYSTEM_CONTROL[SW_RST] obs */
-+ au_writel(0x00000000, 0xAE00001C);
-+}
-+
-+void __init board_setup(void)
-+{
-+ u32 pin_func;
-+ u32 sys_freqctrl, sys_clksrc;
-+
-+#ifdef CONFIG_PCI
-+ // Setup PCI bus controller
-+ au_writel(0, Au1500_PCI_CMEM);
-+ au_writel(0x00003fff, Au1500_CFG_BASE);
-+ au_writel(0xf, Au1500_PCI_CFG);
-+ au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV);
-+ au_writel(0, Au1500_PCI_MWBASE_REV_CCL);
-+ au_writel(0x02a00356, Au1500_PCI_STATCMD);
-+ au_writel(0x00003c04, Au1500_PCI_HDRTYPE);
-+ au_writel(0x00000008, Au1500_PCI_MBAR);
-+ au_sync();
-+#endif
-+
-+ /* Enable sys bus clock divider when IDLE state or no bus activity. */
-+ au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
-+
-+#ifdef CONFIG_RTC
-+ rtc_ops = &pb1500_rtc_ops;
-+ // Enable the RTC if not already enabled
-+ if (!(au_readl(0xac000028) & 0x20)) {
-+ printk("enabling clock ...\n");
-+ au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
-+ }
-+ // Put the clock in BCD mode
-+ if (readl(0xac00002C) & 0x4) { /* reg B */
-+ au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
-+ au_sync();
-+ }
-+#endif
-+}
-diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/init.c linux-2.4.31/arch/mips/jp-embedded/q5/init.c
---- linux-2.4.31.org/arch/mips/jp-embedded/q5/init.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-2.4.31/arch/mips/jp-embedded/q5/init.c 2005-09-10 16:43:21.000000000 -0400
-@@ -0,0 +1,80 @@
-+/*
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ * jp-embedded Q5 board setup.
-+ *
-+ * Author: jp@jp-embedded.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/sched.h>
-+#include <linux/bootmem.h>
-+#include <asm/addrspace.h>
-+#include <asm/bootinfo.h>
-+#include <linux/string.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+
-+int prom_argc;
-+char **prom_argv, **prom_envp;
-+extern void __init prom_init_cmdline(void);
-+extern char *prom_getenv(char *envname);
-+void (*__wbflush) (void);
-+
-+void au1500_wbflush(void)
-+{
-+ __asm__ volatile ("sync");
-+}
-+
-+const char *get_system_type(void)
-+{
-+ return "jp-embedded Q5";
-+}
-+
-+int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
-+{
-+ unsigned char *memsize_str;
-+ unsigned long memsize;
-+
-+ prom_argc = argc;
-+ prom_argv = argv;
-+ prom_envp = envp;
-+
-+ __wbflush = au1500_wbflush;
-+
-+ /* obs */
-+ mips_machgroup = MACH_GROUP_ALCHEMY;
-+ mips_machtype = MACH_PB1500;
-+
-+ prom_init_cmdline();
-+ memsize_str = prom_getenv("memsize");
-+ if (!memsize_str) {
-+ memsize = 0x04000000;
-+ } else {
-+ memsize = simple_strtol(memsize_str, NULL, 0);
-+ }
-+ add_memory_region(0, memsize, BOOT_MEM_RAM);
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(__wbflush);
-diff -Naur linux-2.4.31.org/arch/mips/jp-embedded/q5/irqmap.c linux-2.4.31/arch/mips/jp-embedded/q5/irqmap.c
---- linux-2.4.31.org/arch/mips/jp-embedded/q5/irqmap.c 1969-12-31 19:00:00.000000000 -0500
-+++ linux-2.4.31/arch/mips/jp-embedded/q5/irqmap.c 2005-09-10 16:45:18.000000000 -0400
-@@ -0,0 +1,61 @@
-+/*
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ * jp-embedded Q5 board setup.
-+ *
-+ * Author: jp@jp-embedded.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/module.h>
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/interrupt.h>
-+#include <linux/ioport.h>
-+#include <linux/timex.h>
-+#include <linux/slab.h>
-+#include <linux/random.h>
-+#include <linux/delay.h>
-+
-+#include <asm/bitops.h>
-+#include <asm/bootinfo.h>
-+#include <asm/io.h>
-+#include <asm/mipsregs.h>
-+#include <asm/system.h>
-+#include <asm/au1000.h>
-+
-+au1xxx_irq_map_t au1xxx_irq_map[] = {
-+ { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
-+ { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
-+ { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
-+ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
-+ { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
-+ { AU1500_GPIO_206, INTC_INT_FALL_EDGE, 0 },
-+ { AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
-+};
-+
-+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
-+
---- linux-2.4.31.org/Documentation/Configure.help 2005-04-03 21:42:19.000000000 -0400
-+++ linux-2.4.31/Documentation/Configure.help 2005-09-10 18:50:14.340000000 -0400
-@@ -2197,6 +2197,12 @@
- MIPS-32-based Baget embedded system. This chipset is better known
- via the NE2100 cards.
-
-+jp-embedded Q5 support
-+CONFIG_MIPS_Q5
-+ This enables support for jp-embedded's MIPS based boards. The
-+ boards uses the AU1500 cpu. For more information about these
-+ boards, see <http://www.jp-embedded.com/>.
-+
- Support for DECstations
- CONFIG_DECSTATION
- This enables support for DEC's MIPS based workstations. For details
+++ /dev/null
-diff -Naur linux-2.4.31.org/drivers/net/au1000_eth.c linux-2.4.31/drivers/net/au1000_eth.c
---- linux-2.4.31.org/drivers/net/au1000_eth.c 2005-01-19 09:09:56.000000000 -0500
-+++ linux-2.4.31/drivers/net/au1000_eth.c 2005-08-22 12:24:31.000000000 -0400
-@@ -595,6 +595,97 @@
- return 0;
- }
-
-+int ns_83847_reset(struct net_device *dev, int phy_addr)
-+ {
-+ s16 mii_control, timeout;
-+
-+ // printk("ns_reset\n");
-+ mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
-+ mdio_write(dev, phy_addr, MII_CONTROL, mii_control | MII_CNTL_RESET);
-+ mdelay(1);
-+ for (timeout = 100; timeout > 0; --timeout) {
-+ mii_control = mdio_read(dev, phy_addr, MII_CONTROL);
-+ if ((mii_control & MII_CNTL_RESET) == 0)
-+ break;
-+ mdelay(1);
-+ }
-+ if (mii_control & MII_CNTL_RESET) {
-+ printk(KERN_ERR "%s PHY reset timeout !\n", dev->name);
-+ return -1;
-+ }
-+ return 0;
-+ }
-+
-+int ns_83847_init(struct net_device *dev, int phy_addr)
-+ {
-+ s16 data;
-+ // printk("ns_init\n");
-+
-+ /* Stop auto-negotiation */
-+ // data = mdio_read(dev, phy_addr, MII_CONTROL);
-+ // mdio_write(dev, phy_addr, MII_CONTROL, data & ~MII_CNTL_AUTO);
-+ // mdio_write(dev, phy_addr, 0, 0x0000);
-+ mdio_write(dev, phy_addr, MII_CONTROL, MII_CNTL_F100 /* | MII_CNTL_FDX */);
-+
-+ /* Set advertisement to 10/100 and Half/Full duplex (full capabilities) */
-+ data = mdio_read(dev, phy_addr, MII_ANADV);
-+ /* obs PAUSE bit */
-+ data |= MII_NWAY_TX | MII_NWAY_TX_FDX | MII_NWAY_T_FDX | MII_NWAY_T; /* MII_NWAY_T4 not sopported */ ;
-+ mdio_write(dev, phy_addr, MII_ANADV, data);
-+
-+ /* Bypass led stretching? */
-+ data = mdio_read(dev, phy_addr, MII_NS_PHYCTRL);
-+ data |= MII_NS_PHYCTRL_BP_STRETCH;
-+ mdio_write(dev, phy_addr, MII_NS_PHYCTRL, data);
-+
-+ /* Restart auto-negotiation */
-+ data = mdio_read(dev, phy_addr, MII_CONTROL);
-+ data |= MII_CNTL_RST_AUTO | MII_CNTL_AUTO;
-+ mdio_write(dev, phy_addr, MII_CONTROL, data);
-+
-+ return 0;
-+ }
-+
-+int ns_83847_status(struct net_device *dev, int phy_addr, u16 *link, u16 *speed)
-+ {
-+ u16 mii_data;
-+ struct au1000_private *aup;
-+
-+ if (!dev) {
-+ printk(KERN_ERR "ns_83847_status error: NULL dev\n");
-+ return -1;
-+ }
-+ aup = (struct au1000_private *) dev->priv;
-+
-+ mii_data = mdio_read(dev, aup->phy_addr, MII_STATUS);
-+ // printk("ns_status: %04x\n", mii_data);
-+ if (mii_data & MII_STAT_LINK) {
-+ *link = 1;
-+ mii_data = mdio_read(dev, aup->phy_addr, MII_NS_PHYSTS);
-+ if (mii_data & MII_NS_PHYSTS_SPEED_10) {
-+ *speed = IF_PORT_10BASET;
-+ dev->if_port = IF_PORT_10BASET;
-+ }
-+ else {
-+ if (mii_data & MII_NS_PHYSTS_DUPLEX_FULL) {
-+ *speed = IF_PORT_100BASEFX;
-+ dev->if_port = IF_PORT_100BASEFX;
-+ }
-+ else {
-+ *speed = IF_PORT_100BASETX;
-+ dev->if_port = IF_PORT_100BASETX;
-+ }
-+ }
-+
-+ }
-+ else {
-+ *link = 0;
-+ *speed = 0;
-+ dev->if_port = IF_PORT_UNKNOWN;
-+ }
-+ return 0;
-+ }
-+
- #ifdef CONFIG_MIPS_BOSPORUS
- int stub_init(struct net_device *dev, int phy_addr)
- {
-@@ -620,6 +711,12 @@
- }
- #endif
-
-+struct phy_ops ns_83847_ops = {
-+ ns_83847_init,
-+ ns_83847_reset,
-+ ns_83847_status,
-+};
-+
- struct phy_ops bcm_5201_ops = {
- bcm_5201_init,
- bcm_5201_reset,
-@@ -679,6 +776,7 @@
- {"LSI 80227 10/100 BaseT PHY",0x0016,0xf840, &lsi_80227_ops,0},
- {"Intel LXT971A Dual Speed PHY",0x0013,0x78e2, &lxt971a_ops,0},
- {"Kendin KS8995M 10/100 BaseT PHY",0x0022,0x1450, &ks8995m_ops,0},
-+ {"Natsemi DP83847 PHY", 0x2000, 0x5c30, &ns_83847_ops },
- #ifdef CONFIG_MIPS_BOSPORUS
- {"Stub", 0x1234, 0x5678, &stub_ops },
- #endif
-@@ -872,6 +970,8 @@
- }
- }
- }
-+ printk(KERN_ERR "%s: Au1x No MII transceivers found!\n", dev->name);
-+ return -1;
- found:
-
- #ifdef CONFIG_MIPS_BOSPORUS
-diff -Naur linux-2.4.31.org/drivers/net/au1000_eth.h linux-2.4.31/drivers/net/au1000_eth.h
---- linux-2.4.31.org/drivers/net/au1000_eth.h 2004-02-18 08:36:31.000000000 -0500
-+++ linux-2.4.31/drivers/net/au1000_eth.h 2005-08-22 12:31:37.000000000 -0400
-@@ -86,6 +86,27 @@
- #define MII_STAT_CAN_TX_FDX 0x4000
- #define MII_STAT_CAN_T4 0x8000
-
-+/* mii registers for NS 83847 */
-+#define MII_NS_PHYSTS 0x10
-+#define MII_NS_FCSCR 0x14
-+#define MII_NS_RECR 0x15
-+#define MII_NS_PCSR 0x16
-+#define MII_NS_PHYCTRL 0x19
-+#define MII_NS_10BTSCR 0x1a
-+#define MII_NS_CDCTRL 0x1b
-+
-+/* MII_NS_PHYSTS bits */
-+#define MII_NS_PHYSTS_LINK (1)
-+#define MII_NS_PHYSTS_SPEED_10 (1<<1)
-+#define MII_NS_PHYSTS_DUPLEX_FULL (1<<2)
-+
-+/* MII_NS_PHYCTRL bits */
-+#define MII_NS_PHYCTRL_BP_STRETCH (1<<8)
-+
-+/* MII_NS_CDCTRL bits */
-+#define MII_NS_CDCTRL_CD_ENABLE (1<<15)
-+#define MII_NS_CDCTRL_RISETIME (1<<11)
-+#define MII_NS_CDCTRL_FALLTIME (1<<9)
-
- #define MII_ID1_OUI_LO 0xFC00 /* low bits of OUI mask */
- #define MII_ID1_MODEL 0x03F0 /* model number */
+++ /dev/null
-diff -Naur linux-2.4.31.org/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.4.31/drivers/mtd/chips/cfi_cmdset_0002.c
---- linux-2.4.31.org/drivers/mtd/chips/cfi_cmdset_0002.c 2004-11-17 06:54:21.000000000 -0500
-+++ linux-2.4.31/drivers/mtd/chips/cfi_cmdset_0002.c 2005-08-22 12:14:17.000000000 -0400
-@@ -510,7 +510,7 @@
- or tells us why it failed. */
- dq6 = CMD(1<<6);
- dq5 = CMD(1<<5);
-- timeo = jiffies + (HZ/1000); /* setting timeout to 1ms for now */
-+ timeo = jiffies + (HZ); /* setting timeout to 1s for now */
-
- oldstatus = cfi_read(map, adr);
- status = cfi_read(map, adr);
-@@ -950,12 +950,8 @@
- oldstatus = cfi_read( map, adr );
- status = cfi_read( map, adr );
-
-- if( ( oldstatus & 0x00FF ) == ( status & 0x00FF ) )
-+ if( ( oldstatus & 0x00FF ) != ( status & 0x00FF ) )
- {
-- printk( "Warning: DQ5 raised while erase operation was in progress, but erase completed OK\n" );
-- }
-- else
-- {
- /* DQ5 is active so we can do a reset and stop the erase */
- cfi_write(map, CMD(0xF0), chip->start);
- printk( KERN_WARNING "Internal flash device timeout occured or write operation was performed while flash was erasing\n" );
-
+++ /dev/null
---- linux-2.4.32_old/arch/mips/au1000/common/clocks.c 2005-01-19 15:09:26.000000000 +0100
-+++ linux-2.4.32/arch/mips/au1000/common/clocks.c 2006-01-27 13:51:39.000000000 +0100
-@@ -85,9 +85,7 @@
- lcd_clock = sys_busclk / 4;
-
- if (lcd_clock > 50000) /* Epson MAX */
-- printk(__FUNCTION__
-- ": warning: LCD clock too high (%d KHz)\n",
-- lcd_clock);
-+ printk("warning: LCD clock too high (%d KHz)\n", lcd_clock);
- }
-
- unsigned int get_au1x00_lcd_clock(void)
+++ /dev/null
---- linux-2.4.32_old/include/asm-mips/wbflush.h 2006-01-26 15:16:14.000000000 +0100
-+++ linux-2.4.32/include/asm-mips/wbflush.h 2006-01-27 15:25:54.030500656 +0100
-@@ -15,9 +15,8 @@
-
- #ifdef CONFIG_CPU_HAS_WB
-
--extern void (*__wbflush)(void);
--extern void wbflush_setup(void);
--
-+#define __wbflush() { __asm__ volatile ("sync"); }
-+
- #define wbflush() \
- do { \
- __sync(); \
+++ /dev/null
---- linux/Makefile.orig 2004-08-18 14:17:14.000000000 -0600
-+++ linux/Makefile 2004-08-18 14:17:54.000000000 -0600
-@@ -1,7 +1,7 @@
- VERSION = 2
- PATCHLEVEL = 4
- SUBLEVEL = 32
--EXTRAVERSION =
-+EXTRAVERSION =-q5
-
- KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
-
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MIPS=y
-CONFIG_MIPS32=y
-# CONFIG_MIPS64 is not set
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_KMOD is not set
-
-#
-# Machine selection
-#
-# CONFIG_ACER_PICA_61 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
-# CONFIG_MIPS_PB1550 is not set
-CONFIG_MIPS_Q5=y
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_COGENT_CSB250 is not set
-# CONFIG_BAGET_MIPS is not set
-# CONFIG_CASIO_E55 is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_HP_LASERJET is not set
-# CONFIG_IBM_WORKPAD is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MAGNUM_4000 is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_PMC_BIG_SUR is not set
-# CONFIG_PMC_STRETCH is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_DDB5074 is not set
-# CONFIG_DDB5476 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_NEC_OSPREY is not set
-# CONFIG_NEC_EAGLE is not set
-# CONFIG_OLIVETTI_M700 is not set
-# CONFIG_NINO is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SIBYTE_SB1xxx_SOC is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TANBAC_TB0226 is not set
-# CONFIG_TANBAC_TB0229 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_VICTOR_MPC30X is not set
-# CONFIG_ZAO_CAPCELLA is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_SOC_AU1X00=y
-CONFIG_SOC_AU1500=y
-CONFIG_NONCOHERENT_IO=y
-CONFIG_PC_KEYB=y
-# CONFIG_MIPS_AU1000 is not set
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS64 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-# CONFIG_VTAG_ICACHE is not set
-CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_ADVANCED=y
-CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_HAS_LLDSCD is not set
-CONFIG_CPU_HAS_WB=y
-CONFIG_CPU_HAS_SYNC=y
-
-#
-# General setup
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_BUILD_ELF64 is not set
-CONFIG_NET=y
-CONFIG_PCI=y
-CONFIG_PCI_NEW=y
-CONFIG_PCI_AUTO=y
-# CONFIG_PCI_NAMES is not set
-# CONFIG_ISA is not set
-# CONFIG_TC is not set
-# CONFIG_MCA is not set
-# CONFIG_SBUS is not set
-CONFIG_HOTPLUG=y
-
-#
-# PCMCIA/CardBus support
-#
-# CONFIG_PCMCIA is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
-# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_MIPS32_COMPAT is not set
-# CONFIG_MIPS32_O32 is not set
-# CONFIG_MIPS32_N32 is not set
-# CONFIG_BINFMT_ELF32 is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_OOM_KILLER is not set
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CONCAT=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_B1 is not set
-CONFIG_MTD_CFI_B2=y
-CONFIG_MTD_CFI_B4=y
-# CONFIG_MTD_CFI_B8 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_AMDSTD is not set
-# CONFIG_MTD_SHARP is not set
-# CONFIG_MTD_JEDEC is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x18000000
-CONFIG_MTD_PHYSMAP_LEN=0x2000000
-CONFIG_MTD_PHYSMAP_BUSWIDTH=4
-# CONFIG_MTD_PB1000 is not set
-# CONFIG_MTD_PB1500 is not set
-# CONFIG_MTD_PB1100 is not set
-# CONFIG_MTD_CSTM_MIPS_IXX is not set
-# CONFIG_MTD_OCELOT is not set
-# CONFIG_MTD_LASAT is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PCMCIA is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC1000 is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOCPROBE is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play configuration
-#
-# CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_CISS_SCSI_TAPE is not set
-# CONFIG_CISS_MONITOR_THREAD is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_BLK_STATS is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_FILTER=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_ROUTE_FWMARK is not set
-# CONFIG_IP_ROUTE_NAT is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_TOS is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_FTP=m
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_IRC is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_MAC=m
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-CONFIG_IP_NF_MATCH_TCPMSS=m
-# CONFIG_IP_NF_MATCH_HELPER is not set
-CONFIG_IP_NF_MATCH_STATE=m
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-CONFIG_IP_NF_MATCH_UNCLEAN=m
-# CONFIG_IP_NF_MATCH_OWNER is not set
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-# CONFIG_IP_NF_TARGET_MIRROR is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_DSCP is not set
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_LOG=m
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-# CONFIG_KHTTPD is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_VLAN_8021Q=y
-
-#
-#
-#
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_DECNET is not set
-CONFIG_BRIDGE=m
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-# CONFIG_NET_SCH_CSZ is not set
-# CONFIG_NET_SCH_HFSC is not set
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-# CONFIG_PHONE_IXJ is not set
-# CONFIG_PHONE_IXJ_PCMCIA is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_BOOT is not set
-# CONFIG_FUSION_ISENSE is not set
-# CONFIG_FUSION_CTL is not set
-# CONFIG_FUSION_LAN is not set
-
-#
-# IEEE 1394 (FireWire) support (EXPERIMENTAL)
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_I2O_PCI is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_LAN is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-CONFIG_BONDING=m
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_BCM5222_DUAL_PHY is not set
-# CONFIG_SUNLANCE is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNBMAC is not set
-# CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_TULIP is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_DGRS is not set
-# CONFIG_DM9102 is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_LNE390 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_NE3210 is not set
-# CONFIG_ES3210 is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNDANCE_MMIO is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_LAN_SAA9730 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_MYRI_SBUS is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-CONFIG_STRIP=m
-CONFIG_WAVELAN=m
-CONFIG_ARLAN=m
-CONFIG_AIRONET4500=m
-CONFIG_AIRONET4500_NONCS=m
-CONFIG_AIRONET4500_PNP=y
-CONFIG_AIRONET4500_PCI=y
-# CONFIG_AIRONET4500_ISA is not set
-# CONFIG_AIRONET4500_I365 is not set
-CONFIG_AIRONET4500_PROC=m
-CONFIG_AIRO=m
-# CONFIG_HERMES is not set
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-
-#
-# Prism54 PCI/PCMCIA GT/Duette Driver - 802.11(a/b/g)
-#
-CONFIG_PRISM54=m
-CONFIG_NET_WIRELESS=y
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-# CONFIG_SERIAL is not set
-# CONFIG_SERIAL_EXTENDED is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_DIGI is not set
-# CONFIG_ESPSERIAL is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-# CONFIG_SERIAL_TX3912 is not set
-# CONFIG_SERIAL_TX3912_CONSOLE is not set
-# CONFIG_SERIAL_TXX9 is not set
-# CONFIG_SERIAL_TXX9_CONSOLE is not set
-CONFIG_AU1X00_UART=y
-CONFIG_AU1X00_SERIAL_CONSOLE=y
-# CONFIG_AU1X00_USB_TTY is not set
-# CONFIG_AU1X00_USB_RAW is not set
-# CONFIG_TXX927_SERIAL is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-
-#
-# Input core support is needed for gameports
-#
-
-#
-# Input core support is needed for joysticks
-#
-# CONFIG_QIC02_TAPE is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPMI_PANIC_EVENT is not set
-# CONFIG_IPMI_DEVICE_INTERFACE is not set
-# CONFIG_IPMI_KCS is not set
-# CONFIG_IPMI_WATCHDOG is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_SCx200 is not set
-# CONFIG_SCx200_GPIO is not set
-# CONFIG_AMD_PM768 is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-
-#
-# Direct Rendering Manager (XFree86 DRI support)
-#
-# CONFIG_DRM is not set
-# CONFIG_AU1X00_GPIO is not set
-# CONFIG_TS_AU1X00_ADS7846 is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_QFMT_V2 is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BEFS_DEBUG is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_CRAMFS is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_EXT2_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_TRACE is not set
-# CONFIG_XFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_LOCKD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-# CONFIG_ZISOFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_SMB_NLS is not set
-# CONFIG_NLS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Console drivers
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-
-#
-# Frame-buffer support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# Support for USB gadgets
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BLUEZ is not set
-
-#
-# Kernel hacking
-#
-CONFIG_CROSSCOMPILE=y
-# CONFIG_RUNTIME_DEBUG is not set
-# CONFIG_KGDB is not set
-# CONFIG_GDB_CONSOLE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_MIPS_UNCACHED is not set
-CONFIG_LOG_BUF_SHIFT=0
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_FW_LOADER=y
+++ /dev/null
-#############################################################
-#
-# Linux kernel targets
-#
-# Note: If you have any patches to apply, create the directory
-# sources/kernel-patches and put your patches in there and number
-# them in the order you wish to apply them... i.e.
-#
-# sources/kernel-patches/001-my-special-stuff.bz2
-# sources/kernel-patches/003-gcc-Os.bz2
-# sources/kernel-patches/004_no-warnings.bz2
-# sources/kernel-patches/030-lowlatency-mini.bz2
-# sources/kernel-patches/031-lowlatency-fixes-5.bz2
-# sources/kernel-patches/099-shutup.bz2
-# etc...
-#
-# these patches will all be applied by the patch-kernel.sh
-# script (which will also abort the build if it finds rejects)
-# -Erik
-#
-#############################################################
-ifneq ($(filter $(TARGETS),linux),)
-
-# Base version of Linux kernel that we need to download
-DOWNLOAD_LINUX_VERSION=2.4.32
-# Version of Linux kernel AFTER applying all patches
-LINUX_VERSION=$(DOWNLOAD_LINUX_VERSION)-q5
-
-
-# File name for the Linux kernel binary
-LINUX_KERNEL=linux-kernel-$(LINUX_VERSION)-$(ARCH).srec
-
-
-# Linux kernel configuration file
-LINUX_KCONFIG=$(BOARD_PATH)/linux.config
-
-# kernel patches
-LINUX_PATCH_DIR=target/device/jp/q5/kernel-patches-$(DOWNLOAD_LINUX_VERSION)/
-
-
-
-
-LINUX_FORMAT=vmlinux
-LINUX_KARCH:=$(shell echo $(ARCH) | sed -e 's/i[3-9]86/i386/' \
- -e 's/mipsel/mips/' \
- -e 's/powerpc/ppc/' \
- -e 's/sh[234]/sh/' \
- )
-LINUX_BINLOC=$(LINUX_FORMAT)
-LINUX_DIR=$(BUILD_DIR)/linux-$(LINUX_VERSION)
-LINUX_SOURCE=linux-$(DOWNLOAD_LINUX_VERSION).tar.bz2
-LINUX_CAT:=$(BZCAT)
-LINUX_SITE=$(BR2_KERNEL_MIRROR)/linux/kernel/v2.4
-# Used by pcmcia-cs and others
-LINUX_SOURCE_DIR=$(LINUX_DIR)
-
-$(DL_DIR)/$(LINUX_SOURCE):
- mkdir -p $(DL_DIR)
- $(call DOWNLOAD,$(LINUX_SITE),$(LINUX_SOURCE))
-
-$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE)
- mkdir -p $(TOOL_BUILD_DIR)
- -(cd $(TOOL_BUILD_DIR); ln -snf $(LINUX_DIR) linux)
- $(LINUX_CAT) $(DL_DIR)/$(LINUX_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
-ifneq ($(DOWNLOAD_LINUX_VERSION),$(LINUX_VERSION))
- # Rename the dir from the downloaded version to the AFTER patch version
- mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX_VERSION) $(BUILD_DIR)/linux-$(LINUX_VERSION)
-endif
- toolchain/patch-kernel.sh $(LINUX_DIR) $(LINUX_PATCH_DIR)
- #New versions of binutils does not have -mcpu, but -mtune. -march is not needed because -mips2 is used
- mv $(LINUX_DIR)/arch/mips/Makefile $(LINUX_DIR)/arch/mips/Makefile.org && sed 's/-mcpu/-mtune/g' < $(LINUX_DIR)/arch/mips/Makefile.org > $(LINUX_DIR)/arch/mips/Makefile
- touch $(LINUX_DIR)/.unpacked
-
-$(LINUX_KCONFIG):
- @if [ ! -f "$(LINUX_KCONFIG)" ]; then \
- echo ""; \
- echo "You should create a .config for your kernel"; \
- echo "and install it as $(LINUX_KCONFIG)"; \
- echo ""; \
- sleep 5; \
- fi
-
-$(LINUX_DIR)/.configured $(BUILD_DIR)/linux/.configured: $(LINUX_DIR)/.unpacked $(LINUX_KCONFIG)
- $(SED) "s,^ARCH.*,ARCH=$(LINUX_KARCH),g;" $(LINUX_DIR)/Makefile
- $(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/Makefile
- -cp $(LINUX_KCONFIG) $(LINUX_DIR)/.config
-ifeq ($(BR2_mips),y)
- $(SED) "s,CONFIG_CPU_LITTLE_ENDIAN=y,# CONFIG_CPU_LITTLE_ENDIAN is not set\n# CONFIG_BINFMT_IRIX is not set," $(LINUX_DIR)/.config
-endif
- $(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) oldconfig include/linux/version.h
- touch $(LINUX_DIR)/.configured
-
-$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.configured
- $(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) dep
- touch $(LINUX_DIR)/.depend_done
-
-$(LINUX_DIR)/$(LINUX_BINLOC): $(LINUX_DIR)/.depend_done
- $(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) $(LINUX_FORMAT)
- $(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) modules
-
-$(LINUX_KERNEL): $(LINUX_DIR)/$(LINUX_BINLOC)
- $(KERNEL_CROSS)objcopy -O srec $(LINUX_DIR)/$(LINUX_BINLOC) $(LINUX_KERNEL)
- touch -c $(LINUX_KERNEL)
-
-$(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/modules.dep: $(LINUX_KERNEL) cross-depmod
- rm -rf $(TARGET_DIR)/lib/modules
- rm -f $(TARGET_DIR)/sbin/cardmgr
- $(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) \
- DEPMOD=$(STAGING_DIR)/usr/bin/$(GNU_TARGET_NAME)-depmod \
- INSTALL_MOD_PATH=$(TARGET_DIR) modules_install
-
-$(STAGING_DIR)/usr/include/linux/version.h: $(LINUX_DIR)/.configured
- mkdir -p $(STAGING_DIR)/usr/include
- tar -ch -C $(LINUX_DIR)/include -f - linux | tar -xf - -C $(STAGING_DIR)/usr/include/
- tar -ch -C $(LINUX_DIR)/include -f - asm | tar -xf - -C $(STAGING_DIR)/usr/include/
-
-linux: $(STAGING_DIR)/usr/include/linux/version.h $(TARGET_DIR)/lib/modules/$(LINUX_VERSION)/modules.dep
-
-linux-source: $(DL_DIR)/$(LINUX_SOURCE)
-
-# This has been renamed so we do _NOT_ by default run this on 'make clean'
-linuxclean: clean
- rm -f $(LINUX_KERNEL)
- -$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX_DIR) clean
-
-linux-dirclean:
- rm -rf $(LINUX_DIR)
-
-endif
+++ /dev/null
-../tmp/log
\ No newline at end of file
+++ /dev/null
-# /etc/fstab: static file system information.
-#
-# <file system> <mount pt> <type> <options> <dump> <pass>
-/dev/root / ext2 rw,noauto 0 1
-proc /proc proc defaults 0 0
-devpts /dev/pts devpts defaults,gid=5,mode=620 0 0
-tmpfs /tmp tmpfs defaults 0 0
-
+++ /dev/null
-root:x:0:
-daemon:x:1:
-bin:x:2:
-sys:x:3:
-adm:x:4:
-tty:x:5:
-disk:x:6:
-utmp:x:43:
-staff:x:50:
-default:x:1000:
+++ /dev/null
-127.0.0.1 localhost
+++ /dev/null
-#! /bin/sh
-#
-# urandom This script saves the random seed between reboots.
-# It is called from the boot, halt and reboot scripts.
-#
-# Version: @(#)urandom 1.33 22-Jun-1998 miquels@cistron.nl
-#
-
-[ -c /dev/urandom ] || exit 0
-#. /etc/default/rcS
-
-case "$1" in
- start|"")
- if [ "$VERBOSE" != no ]
- then
- echo -n "Initializing random number generator... "
- fi
- # Load and then save 512 bytes,
- # which is the size of the entropy pool
- if [ -f /etc/random-seed ]
- then
- cat /etc/random-seed >/dev/urandom
- fi
- # check for read only file system
- if ! touch /etc/random-seed 2>/dev/null
- then
- echo "read-only file system detected...done"
- exit
- fi
- rm -f /etc/random-seed
- umask 077
- dd if=/dev/urandom of=/etc/random-seed count=1 \
- >/dev/null 2>&1 || echo "urandom start: failed."
- umask 022
- [ "$VERBOSE" != no ] && echo "done."
- ;;
- stop)
- if ! touch /etc/random-seed 2>/dev/null
- then
- exit
- fi
- # Carry a random seed from shut-down to start-up;
- # see documentation in linux/drivers/char/random.c
- [ "$VERBOSE" != no ] && echo -n "Saving random seed... "
- umask 077
- dd if=/dev/urandom of=/etc/random-seed count=1 \
- >/dev/null 2>&1 || echo "urandom stop: failed."
- [ "$VERBOSE" != no ] && echo "done."
- ;;
- *)
- echo "Usage: urandom {start|stop}" >&2
- exit 1
- ;;
-esac
+++ /dev/null
-#!/bin/sh
-#
-# Start the network....
-#
-
-start() {
- echo "Starting network..."
- /sbin/ifup -a
-}
-stop() {
- echo -n "Stopping network..."
- /sbin/ifdown -a
-}
-restart() {
- stop
- start
-}
-
-case "$1" in
- start)
- start
- ;;
- stop)
- stop
- ;;
- restart|reload)
- restart
- ;;
- *)
- echo $"Usage: $0 {start|stop|restart}"
- exit 1
-esac
-
-exit $?
-
+++ /dev/null
-#!/bin/sh
-
-
-# Start all init scripts in /etc/init.d
-# executing them in numerical order.
-#
-for i in /etc/init.d/S??* ;do
-
- # Ignore dangling symlinks (if any).
- [ ! -f "$i" ] && continue
-
- case "$i" in
- *.sh)
- # Source shell script for speed.
- (
- trap - INT QUIT TSTP
- set start
- . $i
- )
- ;;
- *)
- # No sh extension, so fork subprocess.
- $i start
- ;;
- esac
-done
-
+++ /dev/null
-# /etc/inittab
-#
-# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
-#
-# Note: BusyBox init doesn't support runlevels. The runlevels field is
-# completely ignored by BusyBox init. If you want runlevels, use
-# sysvinit.
-#
-# Format for each entry: <id>:<runlevels>:<action>:<process>
-#
-# id == tty to run on, or empty for /dev/console
-# runlevels == ignored
-# action == one of sysinit, respawn, askfirst, wait, and once
-# process == program to run
-
-# Startup the system
-null::sysinit:/bin/mount -o remount,rw /
-null::sysinit:/bin/mount -t proc proc /proc
-null::sysinit:/bin/mount -a
-null::sysinit:/bin/hostname -F /etc/hostname
-null::sysinit:/sbin/ifconfig lo 127.0.0.1 up
-null::sysinit:/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
-# now run any rc scripts
-::sysinit:/etc/init.d/rcS
-
-# Set up a couple of getty's
-#tty1::respawn:/sbin/getty 38400 tty1
-#tty2::respawn:/sbin/getty 38400 tty2
-
-# Put a getty on the serial port
-ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100
-
-# Logging junk
-null::sysinit:/bin/touch /var/log/messages
-null::respawn:/sbin/syslogd -n -m 0
-null::respawn:/sbin/klogd -n
-#tty3::respawn:/usr/bin/tail -f /var/log/messages
-
-# Stuff to do for the 3-finger salute
-::ctrlaltdel:/sbin/reboot
-
-# Stuff to do before rebooting
-null::shutdown:/usr/bin/killall klogd
-null::shutdown:/usr/bin/killall syslogd
-null::shutdown:/bin/umount -a -r
-null::shutdown:/sbin/swapoff -a
-
+++ /dev/null
-# /etc/inputrc - global inputrc for libreadline
-# See readline(3readline) and `info readline' for more information.
-
-# Be 8 bit clean.
-set input-meta on
-set output-meta on
-set bell-style visible
-
-# To allow the use of 8bit-characters like the german umlauts, comment out
-# the line below. However this makes the meta key not work as a meta key,
-# which is annoying to those which don't need to type in 8-bit characters.
-
-# set convert-meta off
-
-"\e0d": backward-word
-"\e0c": forward-word
-"\e[h": beginning-of-line
-"\e[f": end-of-line
-"\e[1~": beginning-of-line
-"\e[4~": end-of-line
-#"\e[5~": beginning-of-history
-#"\e[6~": end-of-history
-"\e[3~": delete-char
-"\e[2~": quoted-insert
-
-# Common standard keypad and cursor
-# (codes courtsey Werner Fink, <werner@suse.de>)
-#"\e[1~": history-search-backward
-"\e[2~": yank
-"\e[3~": delete-char
-#"\e[4~": set-mark
-"\e[5~": history-search-backward
-"\e[6~": history-search-forward
-# Normal keypad and cursor of xterm
-"\e[F": end-of-line
-"\e[H": beginning-of-line
-# Application keypad and cursor of xterm
-"\eOA": previous-history
-"\eOC": forward-char
-"\eOB": next-history
-"\eOD": backward-char
-"\eOF": end-of-line
-"\eOH": beginning-of-line
-
+++ /dev/null
-
-
-Welcome to the Erik's uClibc development environment.
-
+++ /dev/null
-../proc/mounts
\ No newline at end of file
+++ /dev/null
-# Configure Loopback
-auto lo
-iface lo inet loopback
-
+++ /dev/null
-root:x:0:0:root:/root:/bin/sh
-daemon:x:1:1:daemon:/usr/sbin:/bin/sh
-bin:x:2:2:bin:/bin:/bin/sh
-sys:x:3:3:sys:/dev:/bin/sh
-sync:x:4:100:sync:/bin:/bin/sync
-mail:x:8:8:mail:/var/spool/mail:/bin/sh
-proxy:x:13:13:proxy:/bin:/bin/sh
-www-data:x:33:33:www-data:/var/www:/bin/sh
-backup:x:34:34:backup:/var/backups:/bin/sh
-operator:x:37:37:Operator:/var:/bin/sh
-sshd:x:103:99:Operator:/var:/bin/sh
-nobody:x:99:99:nobody:/home:/bin/sh
-default:x:1000:1000:Default non-root user:/home/default:/bin/sh
+++ /dev/null
-# ~/.bashrc: executed by bash(1) for non-login interactive shells.
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-# If running interactively, then:
-if [ "$PS1" ]; then
-
- if [ "$BASH" ]; then
- export PS1="[\u@\h \W]\\$ "
- alias ll='/bin/ls -laFh'
- alias ls='/bin/ls -F'
- export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
- else
- if [ "`id -u`" -eq 0 ]; then
- export PS1='# '
- else
- export PS1='$ '
- fi
- fi
-
- export USER=`id -un`
- export LOGNAME=$USER
- export HOSTNAME=`/bin/hostname`
- export HISTSIZE=1000
- export HISTFILESIZE=1000
- export PAGER='/bin/more '
- export EDITOR='/bin/vi'
- export INPUTRC=/etc/inputrc
- export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
-
- ### Some aliases
- alias ps2='ps facux '
- alias ps1='ps faxo "%U %t %p %a" '
- alias af='ps af'
- alias cls='clear'
- alias df='df -h'
- alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
- #alias bc='bc -l'
- alias minicom='minicom -c on'
- alias calc='calc -Cd '
- alias bc='calc -Cd '
-fi;
+++ /dev/null
-# /etc/protocols:
-# $Id: protocols,v 1.1 2004/10/09 02:49:18 andersen Exp $
-#
-# Internet (IP) protocols
-#
-# from: @(#)protocols 5.1 (Berkeley) 4/17/89
-#
-# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
-
-ip 0 IP # internet protocol, pseudo protocol number
-icmp 1 ICMP # internet control message protocol
-igmp 2 IGMP # Internet Group Management
-ggp 3 GGP # gateway-gateway protocol
-ipencap 4 IP-ENCAP # IP encapsulated in IP (officially ``IP'')
-st 5 ST # ST datagram mode
-tcp 6 TCP # transmission control protocol
-egp 8 EGP # exterior gateway protocol
-pup 12 PUP # PARC universal packet protocol
-udp 17 UDP # user datagram protocol
-hmp 20 HMP # host monitoring protocol
-xns-idp 22 XNS-IDP # Xerox NS IDP
-rdp 27 RDP # "reliable datagram" protocol
-iso-tp4 29 ISO-TP4 # ISO Transport Protocol class 4
-xtp 36 XTP # Xpress Tranfer Protocol
-ddp 37 DDP # Datagram Delivery Protocol
-idpr-cmtp 39 IDPR-CMTP # IDPR Control Message Transport
-rspf 73 RSPF #Radio Shortest Path First.
-vmtp 81 VMTP # Versatile Message Transport
-ospf 89 OSPFIGP # Open Shortest Path First IGP
-ipip 94 IPIP # Yet Another IP encapsulation
-encap 98 ENCAP # Yet Another IP encapsulation
+++ /dev/null
-../tmp/resolv.conf
\ No newline at end of file
+++ /dev/null
-tty1
-tty2
-tty3
-tty4
-tty5
-tty6
-tty7
-tty8
-ttyS0
-ttyS1
-ttyS2
-ttyS3
+++ /dev/null
-# /etc/services:
-# $Id: services,v 1.1 2004/10/09 02:49:18 andersen Exp $
-#
-# Network services, Internet style
-#
-# Note that it is presently the policy of IANA to assign a single well-known
-# port number for both TCP and UDP; hence, most entries here have two entries
-# even if the protocol doesn't support UDP operations.
-# Updated from RFC 1700, ``Assigned Numbers'' (October 1994). Not all ports
-# are included, only the more common ones.
-
-tcpmux 1/tcp # TCP port service multiplexer
-echo 7/tcp
-echo 7/udp
-discard 9/tcp sink null
-discard 9/udp sink null
-systat 11/tcp users
-daytime 13/tcp
-daytime 13/udp
-netstat 15/tcp
-qotd 17/tcp quote
-msp 18/tcp # message send protocol
-msp 18/udp # message send protocol
-chargen 19/tcp ttytst source
-chargen 19/udp ttytst source
-ftp-data 20/tcp
-ftp 21/tcp
-fsp 21/udp fspd
-ssh 22/tcp # SSH Remote Login Protocol
-ssh 22/udp # SSH Remote Login Protocol
-telnet 23/tcp
-# 24 - private
-smtp 25/tcp mail
-# 26 - unassigned
-time 37/tcp timserver
-time 37/udp timserver
-rlp 39/udp resource # resource location
-nameserver 42/tcp name # IEN 116
-whois 43/tcp nicname
-re-mail-ck 50/tcp # Remote Mail Checking Protocol
-re-mail-ck 50/udp # Remote Mail Checking Protocol
-domain 53/tcp nameserver # name-domain server
-domain 53/udp nameserver
-mtp 57/tcp # deprecated
-bootps 67/tcp # BOOTP server
-bootps 67/udp
-bootpc 68/tcp # BOOTP client
-bootpc 68/udp
-tftp 69/udp
-gopher 70/tcp # Internet Gopher
-gopher 70/udp
-rje 77/tcp netrjs
-finger 79/tcp
-www 80/tcp http # WorldWideWeb HTTP
-www 80/udp # HyperText Transfer Protocol
-link 87/tcp ttylink
-kerberos 88/tcp kerberos5 krb5 # Kerberos v5
-kerberos 88/udp kerberos5 krb5 # Kerberos v5
-supdup 95/tcp
-# 100 - reserved
-hostnames 101/tcp hostname # usually from sri-nic
-iso-tsap 102/tcp tsap # part of ISODE.
-csnet-ns 105/tcp cso-ns # also used by CSO name server
-csnet-ns 105/udp cso-ns
-# unfortunately the poppassd (Eudora) uses a port which has already
-# been assigned to a different service. We list the poppassd as an
-# alias here. This should work for programs asking for this service.
-# (due to a bug in inetd the 3com-tsmux line is disabled)
-#3com-tsmux 106/tcp poppassd
-#3com-tsmux 106/udp poppassd
-rtelnet 107/tcp # Remote Telnet
-rtelnet 107/udp
-pop-2 109/tcp postoffice # POP version 2
-pop-2 109/udp
-pop-3 110/tcp # POP version 3
-pop-3 110/udp
-sunrpc 111/tcp portmapper # RPC 4.0 portmapper TCP
-sunrpc 111/udp portmapper # RPC 4.0 portmapper UDP
-auth 113/tcp authentication tap ident
-sftp 115/tcp
-uucp-path 117/tcp
-nntp 119/tcp readnews untp # USENET News Transfer Protocol
-ntp 123/tcp
-ntp 123/udp # Network Time Protocol
-netbios-ns 137/tcp # NETBIOS Name Service
-netbios-ns 137/udp
-netbios-dgm 138/tcp # NETBIOS Datagram Service
-netbios-dgm 138/udp
-netbios-ssn 139/tcp # NETBIOS session service
-netbios-ssn 139/udp
-imap2 143/tcp # Interim Mail Access Proto v2
-imap2 143/udp
-snmp 161/udp # Simple Net Mgmt Proto
-snmp-trap 162/udp snmptrap # Traps for SNMP
-cmip-man 163/tcp # ISO mgmt over IP (CMOT)
-cmip-man 163/udp
-cmip-agent 164/tcp
-cmip-agent 164/udp
-xdmcp 177/tcp # X Display Mgr. Control Proto
-xdmcp 177/udp
-nextstep 178/tcp NeXTStep NextStep # NeXTStep window
-nextstep 178/udp NeXTStep NextStep # server
-bgp 179/tcp # Border Gateway Proto.
-bgp 179/udp
-prospero 191/tcp # Cliff Neuman's Prospero
-prospero 191/udp
-irc 194/tcp # Internet Relay Chat
-irc 194/udp
-smux 199/tcp # SNMP Unix Multiplexer
-smux 199/udp
-at-rtmp 201/tcp # AppleTalk routing
-at-rtmp 201/udp
-at-nbp 202/tcp # AppleTalk name binding
-at-nbp 202/udp
-at-echo 204/tcp # AppleTalk echo
-at-echo 204/udp
-at-zis 206/tcp # AppleTalk zone information
-at-zis 206/udp
-qmtp 209/tcp # The Quick Mail Transfer Protocol
-qmtp 209/udp # The Quick Mail Transfer Protocol
-z3950 210/tcp wais # NISO Z39.50 database
-z3950 210/udp wais
-ipx 213/tcp # IPX
-ipx 213/udp
-imap3 220/tcp # Interactive Mail Access
-imap3 220/udp # Protocol v3
-ulistserv 372/tcp # UNIX Listserv
-ulistserv 372/udp
-https 443/tcp # MCom
-https 443/udp # MCom
-snpp 444/tcp # Simple Network Paging Protocol
-snpp 444/udp # Simple Network Paging Protocol
-saft 487/tcp # Simple Asynchronous File Transfer
-saft 487/udp # Simple Asynchronous File Transfer
-npmp-local 610/tcp dqs313_qmaster # npmp-local / DQS
-npmp-local 610/udp dqs313_qmaster # npmp-local / DQS
-npmp-gui 611/tcp dqs313_execd # npmp-gui / DQS
-npmp-gui 611/udp dqs313_execd # npmp-gui / DQS
-hmmp-ind 612/tcp dqs313_intercell# HMMP Indication / DQS
-hmmp-ind 612/udp dqs313_intercell# HMMP Indication / DQS
-#
-# UNIX specific services
-#
-exec 512/tcp
-biff 512/udp comsat
-login 513/tcp
-who 513/udp whod
-shell 514/tcp cmd # no passwords used
-syslog 514/udp
-printer 515/tcp spooler # line printer spooler
-talk 517/udp
-ntalk 518/udp
-route 520/udp router routed # RIP
-timed 525/udp timeserver
-tempo 526/tcp newdate
-courier 530/tcp rpc
-conference 531/tcp chat
-netnews 532/tcp readnews
-netwall 533/udp # -for emergency broadcasts
-uucp 540/tcp uucpd # uucp daemon
-afpovertcp 548/tcp # AFP over TCP
-afpovertcp 548/udp # AFP over TCP
-remotefs 556/tcp rfs_server rfs # Brunhoff remote filesystem
-klogin 543/tcp # Kerberized `rlogin' (v5)
-kshell 544/tcp krcmd # Kerberized `rsh' (v5)
-kerberos-adm 749/tcp # Kerberos `kadmin' (v5)
-#
-webster 765/tcp # Network dictionary
-webster 765/udp
-#
-# From ``Assigned Numbers'':
-#
-#> The Registered Ports are not controlled by the IANA and on most systems
-#> can be used by ordinary user processes or programs executed by ordinary
-#> users.
-#
-#> Ports are used in the TCP [45,106] to name the ends of logical
-#> connections which carry long term conversations. For the purpose of
-#> providing services to unknown callers, a service contact port is
-#> defined. This list specifies the port used by the server process as its
-#> contact port. While the IANA can not control uses of these ports it
-#> does register or list uses of these ports as a convienence to the
-#> community.
-#
-nfsdstatus 1110/tcp
-nfsd-keepalive 1110/udp
-
-ingreslock 1524/tcp
-ingreslock 1524/udp
-prospero-np 1525/tcp # Prospero non-privileged
-prospero-np 1525/udp
-datametrics 1645/tcp old-radius # datametrics / old radius entry
-datametrics 1645/udp old-radius # datametrics / old radius entry
-sa-msg-port 1646/tcp old-radacct # sa-msg-port / old radacct entry
-sa-msg-port 1646/udp old-radacct # sa-msg-port / old radacct entry
-radius 1812/tcp # Radius
-radius 1812/udp # Radius
-radacct 1813/tcp # Radius Accounting
-radacct 1813/udp # Radius Accounting
-nfsd 2049/tcp nfs
-nfsd 2049/udp nfs
-cvspserver 2401/tcp # CVS client/server operations
-cvspserver 2401/udp # CVS client/server operations
-mysql 3306/tcp # MySQL
-mysql 3306/udp # MySQL
-rfe 5002/tcp # Radio Free Ethernet
-rfe 5002/udp # Actually uses UDP only
-cfengine 5308/tcp # CFengine
-cfengine 5308/udp # CFengine
-bbs 7000/tcp # BBS service
-#
-#
-# Kerberos (Project Athena/MIT) services
-# Note that these are for Kerberos v4, and are unofficial. Sites running
-# v4 should uncomment these and comment out the v5 entries above.
-#
-kerberos4 750/udp kerberos-iv kdc # Kerberos (server) udp
-kerberos4 750/tcp kerberos-iv kdc # Kerberos (server) tcp
-kerberos_master 751/udp # Kerberos authentication
-kerberos_master 751/tcp # Kerberos authentication
-passwd_server 752/udp # Kerberos passwd server
-krb_prop 754/tcp # Kerberos slave propagation
-krbupdate 760/tcp kreg # Kerberos registration
-kpasswd 761/tcp kpwd # Kerberos "passwd"
-kpop 1109/tcp # Pop with Kerberos
-knetd 2053/tcp # Kerberos de-multiplexor
-zephyr-srv 2102/udp # Zephyr server
-zephyr-clt 2103/udp # Zephyr serv-hm connection
-zephyr-hm 2104/udp # Zephyr hostmanager
-eklogin 2105/tcp # Kerberos encrypted rlogin
-#
-# Unofficial but necessary (for NetBSD) services
-#
-supfilesrv 871/tcp # SUP server
-supfiledbg 1127/tcp # SUP debugging
-#
-# Datagram Delivery Protocol services
-#
-rtmp 1/ddp # Routing Table Maintenance Protocol
-nbp 2/ddp # Name Binding Protocol
-echo 4/ddp # AppleTalk Echo Protocol
-zip 6/ddp # Zone Information Protocol
-#
-# Services added for the Debian GNU/Linux distribution
-poppassd 106/tcp # Eudora
-poppassd 106/udp # Eudora
-mailq 174/tcp # Mailer transport queue for Zmailer
-mailq 174/tcp # Mailer transport queue for Zmailer
-omirr 808/tcp omirrd # online mirror
-omirr 808/udp omirrd # online mirror
-rmtcfg 1236/tcp # Gracilis Packeten remote config server
-xtel 1313/tcp # french minitel
-coda_opcons 1355/udp # Coda opcons (Coda fs)
-coda_venus 1363/udp # Coda venus (Coda fs)
-coda_auth 1357/udp # Coda auth (Coda fs)
-coda_udpsrv 1359/udp # Coda udpsrv (Coda fs)
-coda_filesrv 1361/udp # Coda filesrv (Coda fs)
-codacon 1423/tcp venus.cmu # Coda Console (Coda fs)
-coda_aux1 1431/tcp # coda auxiliary service (Coda fs)
-coda_aux1 1431/udp # coda auxiliary service (Coda fs)
-coda_aux2 1433/tcp # coda auxiliary service (Coda fs)
-coda_aux2 1433/udp # coda auxiliary service (Coda fs)
-coda_aux3 1435/tcp # coda auxiliary service (Coda fs)
-coda_aux3 1435/udp # coda auxiliary service (Coda fs)
-cfinger 2003/tcp # GNU Finger
-afbackup 2988/tcp # Afbackup system
-afbackup 2988/udp # Afbackup system
-icp 3130/tcp # Internet Cache Protocol (Squid)
-icp 3130/udp # Internet Cache Protocol (Squid)
-postgres 5432/tcp # POSTGRES
-postgres 5432/udp # POSTGRES
-fax 4557/tcp # FAX transmission service (old)
-hylafax 4559/tcp # HylaFAX client-server protocol (new)
-noclog 5354/tcp # noclogd with TCP (nocol)
-noclog 5354/udp # noclogd with UDP (nocol)
-hostmon 5355/tcp # hostmon uses TCP (nocol)
-hostmon 5355/udp # hostmon uses TCP (nocol)
-ircd 6667/tcp # Internet Relay Chat
-ircd 6667/udp # Internet Relay Chat
-webcache 8080/tcp # WWW caching service
-webcache 8080/udp # WWW caching service
-tproxy 8081/tcp # Transparent Proxy
-tproxy 8081/udp # Transparent Proxy
-mandelspawn 9359/udp mandelbrot # network mandelbrot
-amanda 10080/udp # amanda backup services
-amandaidx 10082/tcp # amanda backup services
-amidxtape 10083/tcp # amanda backup services
-isdnlog 20011/tcp # isdn logging system
-isdnlog 20011/udp # isdn logging system
-vboxd 20012/tcp # voice box system
-vboxd 20012/udp # voice box system
-binkp 24554/tcp # Binkley
-binkp 24554/udp # Binkley
-asp 27374/tcp # Address Search Protocol
-asp 27374/udp # Address Search Protocol
-tfido 60177/tcp # Ifmail
-tfido 60177/udp # Ifmail
-fido 60179/tcp # Ifmail
-fido 60179/udp # Ifmail
-
-# Local services
-
+++ /dev/null
-root::10933:0:99999:7:::
-bin:*:10933:0:99999:7:::
-daemon:*:10933:0:99999:7:::
-adm:*:10933:0:99999:7:::
-lp:*:10933:0:99999:7:::
-sync:*:10933:0:99999:7:::
-shutdown:*:10933:0:99999:7:::
-halt:*:10933:0:99999:7:::
-uucp:*:10933:0:99999:7:::
-operator:*:10933:0:99999:7:::
-nobody:*:10933:0:99999:7:::
-default::10933:0:99999:7:::
+++ /dev/null
-# ~/.bash_logout: executed by bash(1) when login shell exits.
-
-# when leaving the console clear the screen to increase privacy
-
-case "`tty`" in
- /dev/tty[0-9]*) clear
-esac
+++ /dev/null
-# .bash_profile
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-umask 022
-
-if [ -f ~/.bashrc ]; then
- source ~/.bashrc
-fi
+++ /dev/null
-# ~/.bashrc: executed by bash(1) for non-login interactive shells.
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-# If running interactively, then:
-if [ "$PS1" ]; then
-
- if [ "$BASH" ]; then
- export PS1="[\u@\h \W]\\$ "
- else
- if [ "`id -u`" -eq 0 ]; then
- export PS1='# '
- else
- export PS1='$ '
- fi
- fi
-
- export USER=`id -un`
- export LOGNAME=$USER
- export HOSTNAME=`/bin/hostname`
- export HISTSIZE=1000
- export HISTFILESIZE=1000
- export PAGER='/bin/more '
- export EDITOR='/bin/vi'
- export INPUTRC=/etc/inputrc
- export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
- export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
-
- ### Some aliases
- alias ps2='ps facux '
- alias ps1='ps faxo "%U %t %p %a" '
- alias af='ps af'
- alias cls='clear'
- alias ll='/bin/ls -laFh'
- alias ls='/bin/ls -F'
- alias df='df -h'
- alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
- #alias bc='bc -l'
- alias minicom='minicom -c on'
- alias calc='calc -Cd '
- alias bc='calc -Cd '
-fi;
+++ /dev/null
-#!/bin/sh
-
-# udhcpc script edited by Tim Riker <Tim@Rikers.org>
-
-[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1
-
-RESOLV_CONF="/etc/resolv.conf"
-[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
-[ -n "$subnet" ] && NETMASK="netmask $subnet"
-
-case "$1" in
- deconfig)
- /sbin/ifconfig $interface 0.0.0.0
- ;;
-
- renew|bound)
- /sbin/ifconfig $interface $ip $BROADCAST $NETMASK
-
- if [ -n "$router" ] ; then
- echo "deleting routers"
- while route del default gw 0.0.0.0 dev $interface ; do
- :
- done
-
- for i in $router ; do
- route add default gw $i dev $interface
- done
- fi
-
- echo -n > $RESOLV_CONF
- [ -n "$domain" ] && echo search $domain >> $RESOLV_CONF
- for i in $dns ; do
- echo adding dns $i
- echo nameserver $i >> $RESOLV_CONF
- done
- ;;
-esac
-
-exit 0
+++ /dev/null
-../../tmp
\ No newline at end of file
+++ /dev/null
-../tmp
\ No newline at end of file
+++ /dev/null
-../tmp
\ No newline at end of file
+++ /dev/null
-../tmp
\ No newline at end of file
+++ /dev/null
-../tmp
\ No newline at end of file
+++ /dev/null
-../tmp
\ No newline at end of file
+++ /dev/null
-../tmp
\ No newline at end of file
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-#
-# TARGET_alpha is not set
-# TARGET_arm is not set
-# TARGET_bfin is not set
-# TARGET_cris is not set
-# TARGET_e1 is not set
-# TARGET_frv is not set
-# TARGET_h8300 is not set
-# TARGET_i386 is not set
-# TARGET_i960 is not set
-# TARGET_m68k is not set
-# TARGET_microblaze is not set
-TARGET_mips=y
-# TARGET_nios is not set
-# TARGET_nios2 is not set
-# TARGET_powerpc is not set
-# TARGET_sh is not set
-# TARGET_sh64 is not set
-# TARGET_sparc is not set
-# TARGET_v850 is not set
-# TARGET_x86_64 is not set
-
-#
-# Target Architecture Features and Options
-#
-HAVE_ELF=y
-ARCH_SUPPORTS_LITTLE_ENDIAN=y
-TARGET_ARCH="mips"
-ARCH_CFLAGS="-mno-split-addresses"
-ARCH_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_MIPS_ISA_1 is not set
-# CONFIG_MIPS_ISA_2 is not set
-# CONFIG_MIPS_ISA_3 is not set
-# CONFIG_MIPS_ISA_4 is not set
-CONFIG_MIPS_ISA_MIPS32=y
-# CONFIG_MIPS_ISA_MIPS64 is not set
-ARCH_LITTLE_ENDIAN=y
-# ARCH_BIG_ENDIAN is not set
-# ARCH_HAS_NO_MMU is not set
-ARCH_HAS_MMU=y
-UCLIBC_HAS_FLOATS=y
-HAS_FPU=y
-DO_C99_MATH=y
-KERNEL_SOURCE="/mnt/storage1/jp/cvs/q5/sw/build/buildroot/toolchain_build_mipsel/linux"
-C_SYMBOL_PREFIX=""
-HAVE_DOT_CONFIG=y
-
-#
-# General Library Settings
-#
-# HAVE_NO_PIC is not set
-DOPIC=y
-# HAVE_NO_SHARED is not set
-HAVE_SHARED=y
-# ARCH_HAS_NO_LDSO is not set
-BUILD_UCLIBC_LDSO=y
-# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
-LDSO_LDD_SUPPORT=y
-LDSO_CACHE_SUPPORT=y
-# LDSO_PRELOAD_FILE_SUPPORT is not set
-LDSO_BASE_FILENAME="ld.so"
-LDSO_RUNPATH=y
-# DL_FINI_CRT_COMPAT is not set
-UCLIBC_CTOR_DTOR=y
-# HAS_NO_THREADS is not set
-UCLIBC_HAS_THREADS=y
-PTHREADS_DEBUG_SUPPORT=y
-UCLIBC_HAS_LFS=y
-# UCLIBC_STATIC_LDCONFIG is not set
-# MALLOC is not set
-# MALLOC_SIMPLE is not set
-MALLOC_STANDARD=y
-MALLOC_GLIBC_COMPAT=y
-UCLIBC_DYNAMIC_ATEXIT=y
-HAS_SHADOW=y
-# UNIX98PTY_ONLY is not set
-ASSUME_DEVPTS=y
-UCLIBC_HAS_TM_EXTENSIONS=y
-UCLIBC_HAS_TZ_CACHING=y
-UCLIBC_HAS_TZ_FILE=y
-UCLIBC_HAS_TZ_FILE_READ_MANY=y
-UCLIBC_TZ_FILE_PATH="/etc/TZ"
-
-#
-# Networking Support
-#
-UCLIBC_HAS_IPV6=y
-UCLIBC_HAS_RPC=y
-UCLIBC_HAS_FULL_RPC=y
-
-#
-# String and Stdio Support
-#
-UCLIBC_HAS_STRING_GENERIC_OPT=y
-UCLIBC_HAS_STRING_ARCH_OPT=y
-UCLIBC_HAS_CTYPE_TABLES=y
-UCLIBC_HAS_CTYPE_SIGNED=y
-# UCLIBC_HAS_CTYPE_UNSAFE is not set
-UCLIBC_HAS_CTYPE_CHECKED=y
-# UCLIBC_HAS_CTYPE_ENFORCED is not set
-UCLIBC_HAS_WCHAR=y
-# UCLIBC_HAS_LOCALE is not set
-UCLIBC_HAS_HEXADECIMAL_FLOATS=y
-UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
-UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
-UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
-# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
-UCLIBC_HAS_STDIO_BUFSIZ_4096=y
-# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
-UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
-# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
-UCLIBC_HAS_STDIO_GETC_MACRO=y
-UCLIBC_HAS_STDIO_PUTC_MACRO=y
-UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
-# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
-UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
-UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
-UCLIBC_HAS_PRINTF_M_SPEC=y
-UCLIBC_HAS_ERRNO_MESSAGES=y
-# UCLIBC_HAS_SYS_ERRLIST is not set
-UCLIBC_HAS_SIGNUM_MESSAGES=y
-# UCLIBC_HAS_SYS_SIGLIST is not set
-UCLIBC_HAS_GNU_GETOPT=y
-
-#
-# Big and Tall
-#
-UCLIBC_HAS_REGEX=y
-# UCLIBC_HAS_WORDEXP is not set
-UCLIBC_HAS_FTW=y
-UCLIBC_HAS_GLOB=y
-
-#
-# Library Installation Options
-#
-SHARED_LIB_LOADER_PREFIX="/lib"
-RUNTIME_PREFIX="/"
-DEVEL_PREFIX="/usr/"
-
-#
-# uClibc security related options
-#
-# UCLIBC_SECURITY is not set
-
-#
-# uClibc development/debugging options
-#
-CROSS_COMPILER_PREFIX="/mnt/storage1/jp/cvs/q5/sw/build/buildroot/build_mipsel/staging_dir/bin/mipsel-linux-uclibc-"
-# DODEBUG is not set
-# DODEBUG_PT is not set
-# DOASSERTS is not set
-# SUPPORT_LD_DEBUG is not set
-# SUPPORT_LD_DEBUG_EARLY is not set
-WARNINGS="-Wall"
-# UCLIBC_MJN3_ONLY is not set
projects / buildroot.git / commitdiff