+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Sat Jan 31 00:17:40 2009
-#
-BR2_HAVE_DOT_CONFIG=y
-BR2_VERSION="2009.02-svn"
-# BR2_alpha is not set
-# BR2_arm is not set
-# BR2_armeb is not set
-BR2_avr32=y
-# BR2_cris is not set
-# BR2_ia64 is not set
-# BR2_i386 is not set
-# BR2_m68k is not set
-# BR2_mips is not set
-# BR2_mipsel is not set
-# BR2_nios2 is not set
-# BR2_powerpc is not set
-# BR2_sh is not set
-# BR2_sh64 is not set
-# BR2_sparc is not set
-# BR2_sparc64 is not set
-# BR2_x86_64 is not set
-BR2_ARCH="avr32"
-BR2_ENDIAN="BIG"
-
-#
-# Target options
-#
-
-#
-# Project Options
-#
-BR2_PROJECT="atstk1005"
-BR2_HOSTNAME="ATSTK1005"
-BR2_BANNER="ATNSTK1005 ($(DATE))"
-
-#
-# Preset Devices
-#
-BR2_BOARD_NAME="atstk1005"
-BR2_BOARD_PATH="target/device/Atmel/$(BR2_BOARD_NAME)"
-BR2_TARGET_ATMEL=y
-
-#
-# Atmel AVR32 Specific Device Support
-#
-BR2_TARGET_AVR32=y
-# BR2_TARGET_AT32AP7000 is not set
-# BR2_TARGET_AT32AP7001 is not set
-# BR2_TARGET_AT32AP7002 is not set
-BR2_TARGET_AT32AP7200=y
-
-#
-# Development board support
-#
-# BR2_TARGET_AVR32_ATSTK1002 is not set
-BR2_TARGET_AVR32_ATSTK1005=y
-# BR2_TARGET_AVR32_ATNGW100 is not set
-# BR2_TARGET_AVR32_ATNGW100_BASE is not set
-# BR2_TARGET_AVR32_ATNGW100_EXPANDED is not set
-
-#
-# Package support
-#
-
-#
-# Secondary locations
-#
-BR2_KERNEL_ARCH_PATCH_VERSION="2.6.27.6"
-BR2_KERNEL_ARCH_PATCH_DIR="target/device/Atmel/arch-avr32/kernel-patches-$(BR2_KERNEL_ARCH_PATCH_VERSION)"
-# BR2_TARGET_VALKA is not set
-
-#
-# Generic System Support
-#
-# BR2_TARGET_GENERIC_ACCESS_POINT is not set
-# BR2_TARGET_GENERIC_FIREWALL is not set
-# BR2_TARGET_GENERIC_DEV_SYSTEM is not set
-
-#
-# Build options
-#
-BR2_WGET="wget --passive-ftp --retry-connrefused --waitretry=10"
-BR2_SVN="svn"
-BR2_GIT="git"
-BR2_ZCAT="zcat"
-BR2_BZCAT="bzcat"
-BR2_TAR_OPTIONS=""
-BR2_DL_DIR="$(TOPDIR)/dl"
-
-#
-# Mirrors and Download locations
-#
-BR2_PRIMARY_SITE=""
-BR2_BACKUP_SITE="http://sources.buildroot.net/"
-BR2_SOURCEFORGE_MIRROR="easynews"
-BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
-BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
-BR2_DEBIAN_MIRROR="http://ftp.debian.org"
-
-#
-# Atmel Mirrors
-#
-BR2_STAGING_DIR="$(BASE_DIR)/staging"
-# BR2_FPU_SUFFIX is not set
-BR2_TOPDIR_PREFIX=""
-BR2_TOPDIR_SUFFIX=""
-BR2_ROOTFS_PREFIX="rootfs"
-BR2_JLEVEL=2
-# BR2_DEPRECATED is not set
-# BR2_ENABLE_DEBUG is not set
-BR2_STRIP_strip=y
-# BR2_STRIP_sstrip is not set
-# BR2_STRIP_none is not set
-# BR2_OPTIMIZE_0 is not set
-# BR2_OPTIMIZE_1 is not set
-# BR2_OPTIMIZE_2 is not set
-# BR2_OPTIMIZE_3 is not set
-BR2_OPTIMIZE_S=y
-# BR2_PREFER_STATIC_LIB is not set
-# BR2_HAVE_DOCUMENTATION is not set
-# BR2_HAVE_DEVFILES is not set
-
-#
-# Toolchain
-#
-BR2_TOOLCHAIN_BUILDROOT=y
-# BR2_TOOLCHAIN_EXTERNAL is not set
-
-#
-# Kernel Header Options
-#
-# BR2_KERNEL_HEADERS_2_4_31 is not set
-# BR2_KERNEL_HEADERS_2_6_20_4 is not set
-# BR2_KERNEL_HEADERS_2_6_20 is not set
-# BR2_KERNEL_HEADERS_2_6_21_5 is not set
-# BR2_KERNEL_HEADERS_2_6_21 is not set
-# BR2_KERNEL_HEADERS_2_6_22_1 is not set
-# BR2_KERNEL_HEADERS_2_6_22_10 is not set
-# BR2_KERNEL_HEADERS_2_6_22 is not set
-# BR2_KERNEL_HEADERS_2_6_23 is not set
-# BR2_KERNEL_HEADERS_2_6_24 is not set
-# BR2_KERNEL_HEADERS_2_6_25 is not set
-# BR2_KERNEL_HEADERS_2_6_26 is not set
-# BR2_KERNEL_HEADERS_2_6_27 is not set
-BR2_KERNEL_HEADERS_2_6_28=y
-# BR2_KERNEL_HEADERS_SNAP is not set
-BR2_KERNEL_HEADERS_PATCH_DIR=y
-BR2_DEFAULT_KERNEL_HEADERS="2.6.28.2"
-
-#
-# uClibc Options
-#
-# BR2_UCLIBC_VERSION_0_9_29 is not set
-# BR2_UCLIBC_VERSION_0_9_30 is not set
-BR2_UCLIBC_VERSION_0_9_30_1=y
-# BR2_UCLIBC_VERSION_SNAPSHOT is not set
-BR2_UCLIBC_VERSION_STRING="0.9.30.1"
-BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.30.config"
-# BR2_PTHREAD_DEBUG is not set
-# BR2_PROGRAM_INVOCATION is not set
-# BR2_UCLIBC_INSTALL_TEST_SUITE is not set
-
-#
-# Binutils Options
-#
-# BR2_BINUTILS_VERSION_2_17 is not set
-# BR2_BINUTILS_VERSION_2_17_50_0_17 is not set
-# BR2_BINUTILS_VERSION_2_18 is not set
-# BR2_BINUTILS_VERSION_2_18_50_0_1 is not set
-# BR2_BINUTILS_VERSION_2_18_50_0_3 is not set
-# BR2_BINUTILS_VERSION_2_18_50_0_6 is not set
-# BR2_BINUTILS_VERSION_2_18_50_0_8 is not set
-# BR2_BINUTILS_VERSION_2_18_50_0_9 is not set
-BR2_BINUTILS_VERSION_2_18_AVR32_1_0_1=y
-# BR2_BINUTILS_VERSION_2_19 is not set
-BR2_BINUTILS_VERSION="2.18-avr32-1.0.1"
-BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
-
-#
-# GCC Options
-#
-# BR2_GCC_VERSION_3_4_6 is not set
-# BR2_GCC_VERSION_4_0_4 is not set
-# BR2_GCC_VERSION_4_1_2 is not set
-# BR2_GCC_VERSION_4_2_1 is not set
-# BR2_GCC_VERSION_4_2_2 is not set
-BR2_GCC_VERSION_4_2_2_AVR32_2_1_5=y
-# BR2_GCC_VERSION_4_2_3 is not set
-# BR2_GCC_VERSION_4_2_4 is not set
-# BR2_GCC_VERSION_4_3_1 is not set
-# BR2_GCC_VERSION_4_3_2 is not set
-BR2_GCC_SUPPORTS_SYSROOT=y
-# BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE is not set
-BR2_GCC_VERSION="4.2.2-avr32-2.1.5"
-BR2_TOOLCHAIN_SYSROOT=y
-BR2_EXTRA_GCC_CONFIG_OPTIONS=""
-BR2_GCC_SHARED_LIBGCC=y
-
-#
-# Ccache Options
-#
-# BR2_CCACHE is not set
-
-#
-# Gdb Options
-#
-# BR2_PACKAGE_GDB is not set
-BR2_PACKAGE_GDB_SERVER=y
-BR2_PACKAGE_GDB_HOST=y
-# BR2_GDB_VERSION_6_2_1 is not set
-# BR2_GDB_VERSION_6_3 is not set
-# BR2_GDB_VERSION_6_4 is not set
-# BR2_GDB_VERSION_6_5 is not set
-# BR2_GDB_VERSION_6_6 is not set
-# BR2_GDB_VERSION_6_7_1 is not set
-BR2_GDB_VERSION_6_7_1_AVR32_2_1_5=y
-# BR2_GDB_VERSION_6_8 is not set
-# BR2_GDB_VERSION_SNAPSHOT is not set
-BR2_GDB_VERSION="6.7.1-avr32-2.1.5"
-
-#
-# Common Toolchain Options
-#
-BR2_LARGEFILE=y
-BR2_INET_IPV6=y
-BR2_INET_RPC=y
-BR2_ENABLE_LOCALE=y
-BR2_USE_WCHAR=y
-BR2_SOFT_FLOAT=y
-# BR2_PTHREADS_NONE is not set
-# BR2_PTHREADS is not set
-BR2_PTHREADS_OLD=y
-# BR2_PTHREADS_NATIVE is not set
-BR2_GCC_CROSS_CXX=y
-BR2_INSTALL_LIBSTDCPP=y
-BR2_TARGET_OPTIMIZATION="-Os -pipe"
-# BR2_MKLIBS is not set
-# BR2_PACKAGE_SSTRIP_TARGET is not set
-# BR2_PACKAGE_SSTRIP_HOST is not set
-BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y
-
-#
-# Package Selection for the target
-#
-BR2_PACKAGE_BUSYBOX=y
-# BR2_BUSYBOX_VERSION_1_2_2_1 is not set
-# BR2_BUSYBOX_VERSION_1_6_1 is not set
-# BR2_BUSYBOX_VERSION_1_7_X is not set
-# BR2_BUSYBOX_VERSION_1_8_X is not set
-# BR2_BUSYBOX_VERSION_1_9_X is not set
-# BR2_BUSYBOX_VERSION_1_10_X is not set
-# BR2_BUSYBOX_VERSION_1_11_X is not set
-# BR2_BUSYBOX_VERSION_1_12_X is not set
-BR2_BUSYBOX_VERSION_1_13_X=y
-# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
-BR2_BUSYBOX_VERSION="1.13.4"
-BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
-BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
-# BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
-
-#
-# The minimum needed to build a uClibc development system
-#
-# BR2_PACKAGE_FLEX is not set
-# BR2_PACKAGE_GCC_TARGET is not set
-# BR2_PACKAGE_MAKE is not set
-
-#
-# Other development stuff
-#
-# BR2_PACKAGE_AUTOCONF is not set
-# BR2_PACKAGE_AUTOMAKE is not set
-# BR2_PACKAGE_BISON is not set
-# BR2_PACKAGE_CCACHE_TARGET is not set
-# BR2_PACKAGE_CVS is not set
-# BR2_PACKAGE_DISTCC is not set
-# BR2_PACKAGE_DMALLOC is not set
-# BR2_PACKAGE_FAKEROOT is not set
-BR2_PACKAGE_GETTEXT=y
-BR2_PACKAGE_LIBINTL=y
-# BR2_PACKAGE_LIBGMP is not set
-# BR2_PACKAGE_GPERF is not set
-# BR2_PACKAGE_LIBMPFR is not set
-# BR2_PACKAGE_LIBTOOL is not set
-# BR2_PACKAGE_M4 is not set
-# BR2_PACKAGE_OPROFILE is not set
-# BR2_PACKAGE_READLINE is not set
-# BR2_PACKAGE_PCRE is not set
-
-#
-# Other stuff
-#
-# BR2_PACKAGE_AT is not set
-# BR2_PACKAGE_BEECRYPT is not set
-# BR2_PACKAGE_BERKELEYDB is not set
-# BR2_PACKAGE_BSDIFF is not set
-# BR2_PACKAGE_CUPS is not set
-# BR2_PACKAGE_CUSTOMIZE is not set
-# BR2_PACKAGE_FILE is not set
-# BR2_PACKAGE_GAMIN is not set
-# BR2_PACKAGE_ICU is not set
-# BR2_PACKAGE_KEXEC is not set
-# BR2_PACKAGE_LIBCONFIG is not set
-# BR2_PACKAGE_LIBCONFUSE is not set
-BR2_PACKAGE_LIBDAEMON=y
-# BR2_PACKAGE_LIBELF is not set
-# BR2_PACKAGE_LIBEVENT is not set
-# BR2_PACKAGE_LIBGCRYPT is not set
-# BR2_PACKAGE_LIBGPG_ERROR is not set
-BR2_PACKAGE_LIBICONV=y
-# BR2_PACKAGE_LIBIDN is not set
-# BR2_PACKAGE_LIBLOCKFILE is not set
-# BR2_PACKAGE_LIBOIL is not set
-# BR2_PACKAGE_LIBSYSFS is not set
-# BR2_PACKAGE_LOCKFILE_PROGS is not set
-# BR2_PACKAGE_LOGROTATE is not set
-# BR2_PACKAGE_LSOF is not set
-# BR2_PACKAGE_LTP-TESTSUITE is not set
-# BR2_PACKAGE_LTRACE is not set
-# BR2_PACKAGE_MEMSTAT is not set
-# BR2_PACKAGE_NG_SPICE_REWORK is not set
-# BR2_PACKAGE_POPT is not set
-# BR2_PACKAGE_SCREEN is not set
-# BR2_PACKAGE_STARTUP_NOTIFICATION is not set
-BR2_PACKAGE_STRACE=y
-# BR2_PACKAGE_SUDO is not set
-
-#
-# Database
-#
-# BR2_PACKAGE_MYSQL_CLIENT is not set
-# BR2_PACKAGE_SQLITE is not set
-
-#
-# Networking
-#
-
-#
-# Networking applications
-#
-# BR2_PACKAGE_ARGUS is not set
-BR2_PACKAGE_AVAHI=y
-BR2_PACKAGE_AVAHI_AUTOIPD=y
-# BR2_PACKAGE_AVAHI_DAEMON is not set
-# BR2_PACKAGE_AXEL is not set
-# BR2_PACKAGE_BIND is not set
-BR2_PACKAGE_BRIDGE=y
-BR2_PACKAGE_DNSMASQ=y
-BR2_PACKAGE_DNSMASQ_TFTP=y
-BR2_PACKAGE_DROPBEAR=y
-# BR2_PACKAGE_ETHTOOL is not set
-BR2_PACKAGE_HASERL=y
-# BR2_PACKAGE_HASERL_VERSION_0_8_X is not set
-BR2_PACKAGE_HASERL_VERSION_0_9_X=y
-BR2_PACKAGE_HASERL_VERSION="0.9.25"
-# BR2_PACKAGE_IFPLUGD is not set
-# BR2_PACKAGE_IPERF is not set
-# BR2_PACKAGE_IPROUTE2 is not set
-
-#
-# ipsec-tools - disabled (requires openssl, flex and the flex library (libfl.a) )
-#
-BR2_PACKAGE_IPTABLES=y
-# BR2_PACKAGE_KISMET is not set
-# BR2_PACKAGE_L2TP is not set
-# BR2_PACKAGE_LIBCGI is not set
-# BR2_PACKAGE_LIBCGICC is not set
-# BR2_PACKAGE_LIBCURL is not set
-# BR2_PACKAGE_LIBDNET is not set
-# BR2_PACKAGE_LIBEXOSIP2 is not set
-# BR2_PACKAGE_LIBOSIP2 is not set
-# BR2_PACKAGE_LIBPCAP is not set
-BR2_PACKAGE_LIBUPNP=y
-# BR2_PACKAGE_LINKS is not set
-BR2_PACKAGE_LRZSZ=y
-# BR2_PACKAGE_MDNSRESPONDER is not set
-BR2_PACKAGE_MICROCOM=y
-# BR2_PACKAGE_MIIDIAG is not set
-# BR2_PACKAGE_MROUTED is not set
-# BR2_PACKAGE_MUTT is not set
-BR2_PACKAGE_NBD=y
-BR2_PACKAGE_NCFTP=y
-
-#
-# ncFTP tools selection
-#
-# BR2_PACKAGE_NCFTP_GET is not set
-# BR2_PACKAGE_NCFTP_PUT is not set
-# BR2_PACKAGE_NCFTP_LS is not set
-# BR2_PACKAGE_NCFTP_BATCH is not set
-# BR2_PACKAGE_NCFTP_SPOOLER is not set
-# BR2_PACKAGE_NCFTP_BOOKMARKS is not set
-# BR2_PACKAGE_NEON is not set
-# BR2_PACKAGE_NETKITBASE is not set
-# BR2_PACKAGE_NETKITTELNET is not set
-# BR2_PACKAGE_NETPLUG is not set
-# BR2_PACKAGE_NETSNMP is not set
-# BR2_PACKAGE_NFS_UTILS is not set
-BR2_PACKAGE_NTP=y
-# BR2_PACKAGE_NTP_SNTP is not set
-# BR2_PACKAGE_OLSR is not set
-# BR2_PACKAGE_OPENNTPD is not set
-# BR2_PACKAGE_OPENSSH is not set
-# BR2_PACKAGE_OPENSSL is not set
-# BR2_PACKAGE_OPENVPN is not set
-# BR2_PACKAGE_OPENSWAN is not set
-BR2_PACKAGE_PORTMAP=y
-# BR2_PACKAGE_PPPD is not set
-# BR2_PACKAGE_RADVD is not set
-# BR2_PACKAGE_RP_PPPOE is not set
-# BR2_PACKAGE_PPTP_LINUX is not set
-BR2_PACKAGE_PROFTPD=y
-
-#
-# quagga suite
-#
-# BR2_PACKAGE_QUAGGA_ZEBRA is not set
-# BR2_PACKAGE_QUAGGA_BGPD is not set
-# BR2_PACKAGE_QUAGGA_RIPD is not set
-# BR2_PACKAGE_QUAGGA_RIPNGD is not set
-# BR2_PACKAGE_QUAGGA_OSPFD is not set
-# BR2_PACKAGE_QUAGGA_OSPF6D is not set
-# BR2_PACKAGE_QUAGGA_WATCHQUAGGA is not set
-# BR2_PACKAGE_QUAGGA_ISISD is not set
-BR2_PACKAGE_RSYNC=y
-BR2_PACKAGE_SAMBA=y
-
-#
-# Samba tools selection
-#
-# BR2_PACKAGE_SAMBA_CIFS is not set
-# BR2_PACKAGE_SAMBA_EVENTLOGADM is not set
-
-#
-# findsmb - disabled (requires nmblookup, smbclient and perl)
-#
-# BR2_PACKAGE_SAMBA_NET is not set
-BR2_PACKAGE_SAMBA_NMBD=y
-# BR2_PACKAGE_SAMBA_NMBLOOKUP is not set
-# BR2_PACKAGE_SAMBA_NTLM_AUTH is not set
-# BR2_PACKAGE_SAMBA_PDBEDIT is not set
-# BR2_PACKAGE_SAMBA_PROFILES is not set
-# BR2_PACKAGE_SAMBA_RPCCLIENT is not set
-# BR2_PACKAGE_SAMBA_SMBCACLS is not set
-# BR2_PACKAGE_SAMBA_SMBCLIENT is not set
-# BR2_PACKAGE_SAMBA_SMBCONTROL is not set
-# BR2_PACKAGE_SAMBA_SMBCQUOTAS is not set
-# BR2_PACKAGE_SAMBA_SMBGET is not set
-BR2_PACKAGE_SAMBA_SMBPASSWD=y
-# BR2_PACKAGE_SAMBA_SMBSPOOL is not set
-# BR2_PACKAGE_SAMBA_SMBSTATUS is not set
-# BR2_PACKAGE_SAMBA_SMBTREE is not set
-BR2_PACKAGE_SAMBA_SWAT=y
-
-#
-# smbtar - disabled (requires smbclient)
-#
-# BR2_PACKAGE_SAMBA_TDB is not set
-# BR2_PACKAGE_SAMBA_TESTPARM is not set
-# BR2_PACKAGE_SAMBA_WINBINDD is not set
-# BR2_PACKAGE_SOCAT is not set
-# BR2_PACKAGE_STUNNEL is not set
-# BR2_PACKAGE_TCPDUMP is not set
-# BR2_PACKAGE_DHCPDUMP is not set
-# BR2_PACKAGE_TFTPD is not set
-# BR2_PACKAGE_TN5250 is not set
-# BR2_PACKAGE_TTCP is not set
-# BR2_PACKAGE_UDPCAST is not set
-# BR2_PACKAGE_VPNC is not set
-# BR2_PACKAGE_VSFTPD is not set
-# BR2_PACKAGE_VTUN is not set
-# BR2_PACKAGE_WEBIF is not set
-BR2_PACKAGE_WIRELESS_TOOLS=y
-
-#
-# Hardware handling / blockdevices and filesystem maintenance
-#
-
-#
-# dbus not available (need expat or libxml2)
-#
-# BR2_PACKAGE_DEVMEM2 is not set
-# BR2_PACKAGE_DM is not set
-# BR2_PACKAGE_DMRAID is not set
-# BR2_PACKAGE_E2FSPROGS is not set
-# BR2_PACKAGE_EEPROG is not set
-# BR2_PACKAGE_FCONFIG is not set
-# BR2_PACKAGE_FIS is not set
-# BR2_PACKAGE_LIBFUSE is not set
-# BR2_PACKAGE_GADGETFS_TEST is not set
-# BR2_PACKAGE_HAL is not set
-# BR2_PACKAGE_HWDATA is not set
-# BR2_PACKAGE_I2C_TOOLS is not set
-# BR2_PACKAGE_INPUT_TOOLS is not set
-# BR2_PACKAGE_IOSTAT is not set
-# BR2_PACKAGE_LIBAIO is not set
-# BR2_PACKAGE_LIBRAW1394 is not set
-# BR2_PACKAGE_LIBUSB is not set
-# BR2_PACKAGE_LM_SENSORS is not set
-# BR2_PACKAGE_LVM2 is not set
-# BR2_PACKAGE_MDADM is not set
-# BR2_PACKAGE_MEMTESTER is not set
-# BR2_PACKAGE_MKDOSFS is not set
-BR2_PACKAGE_MTD=y
-BR2_PACKAGE_MTD_UTILS=y
-# BR2_PACKAGE_MTD_20061007 is not set
-# BR2_PACKAGE_MTD_20050122 is not set
-# BR2_PACKAGE_MTD_UTILS_GIT is not set
-
-#
-# MTD tools selection
-#
-# BR2_PACKAGE_MTD_DOCFDISK is not set
-# BR2_PACKAGE_MTD_DOC_LOADBIOS is not set
-BR2_PACKAGE_MTD_FLASHCP=y
-BR2_PACKAGE_MTD_FLASH_ERASE=y
-BR2_PACKAGE_MTD_FLASH_ERASEALL=y
-BR2_PACKAGE_MTD_FLASH_INFO=y
-# BR2_PACKAGE_MTD_FLASH_LOCK is not set
-# BR2_PACKAGE_MTD_FLASH_UNLOCK is not set
-# BR2_PACKAGE_MTD_FTL_CHECK is not set
-# BR2_PACKAGE_MTD_FTL_FORMAT is not set
-# BR2_PACKAGE_MTD_JFFS2DUMP is not set
-# BR2_PACKAGE_MTD_MKFSJFFS2 is not set
-# BR2_PACKAGE_MTD_MKFSJFFS is not set
-BR2_PACKAGE_MTD_MTD_DEBUG=y
-# BR2_PACKAGE_MTD_NANDDUMP is not set
-# BR2_PACKAGE_MTD_NANDWRITE is not set
-# BR2_PACKAGE_MTD_NFTL_FORMAT is not set
-# BR2_PACKAGE_MTD_NFTLDUMP is not set
-# BR2_PACKAGE_MTD_SUMTOOL is not set
-# BR2_PACKAGE_NTFS-3G is not set
-# BR2_PACKAGE_PCIUTILS is not set
-# BR2_PACKAGE_SETSERIAL is not set
-# BR2_PACKAGE_SMARTMONTOOLS is not set
-# BR2_PACKAGE_USBMOUNT is not set
-# BR2_PACKAGE_USBUTILS is not set
-# BR2_PACKAGE_WIPE is not set
-# BR2_PACKAGE_XFSPROGS is not set
-
-#
-# Audio and video libraries and applications
-#
-# BR2_PACKAGE_ALSA_LIB is not set
-
-#
-# asterisk - disabled (required openssl and mpg123)
-#
-# BR2_PACKAGE_AUMIX is not set
-# BR2_PACKAGE_GSTREAMER is not set
-# BR2_PACKAGE_LIBID3TAG is not set
-# BR2_PACKAGE_LIBMAD is not set
-# BR2_PACKAGE_LIBMPD is not set
-# BR2_PACKAGE_LIBOGG is not set
-# BR2_PACKAGE_LIBSNDFILE is not set
-# BR2_PACKAGE_LIBTHEORA is not set
-
-#
-# libvorbis requires the package libogg to build
-#
-# BR2_PACKAGE_MADPLAY is not set
-# BR2_PACKAGE_MPG123 is not set
-# BR2_PACKAGE_MPLAYER is not set
-# BR2_PACKAGE_SPEEX is not set
-# BR2_PACKAGE_FESTIVAL is not set
-# BR2_PACKAGE_VLC is not set
-
-#
-# Graphic libraries and applications (graphic/text)
-#
-
-#
-# text rendering libraries
-#
-BR2_PACKAGE_NCURSES=y
-# BR2_PACKAGE_NCURSES_TARGET_PANEL is not set
-# BR2_PACKAGE_NCURSES_TARGET_FORM is not set
-# BR2_PACKAGE_NCURSES_TARGET_MENU is not set
-# BR2_PACKAGE_NCURSES_TARGET_HEADERS is not set
-# BR2_PACKAGE_NEWT is not set
-# BR2_PACKAGE_SLANG is not set
-
-#
-# text rendering applications
-#
-# BR2_PACKAGE_DIALOG is not set
-
-#
-# graphic libraries
-#
-# BR2_PACKAGE_DIRECTFB is not set
-# BR2_PACKAGE_FBDUMP is not set
-# BR2_PACKAGE_IMAGEMAGICK is not set
-# BR2_PACKAGE_JPEG is not set
-# BR2_PACKAGE_LIBART is not set
-# BR2_PACKAGE_LIBPNG is not set
-# BR2_PACKAGE_LIBUNGIF is not set
-# BR2_PACKAGE_LINUX_FUSION is not set
-# BR2_PACKAGE_PIXMAN is not set
-# BR2_PACKAGE_SDL is not set
-# BR2_PACKAGE_TIFF is not set
-
-#
-# busybox graphic applications
-#
-
-#
-# --> May be broken in busybox
-#
-# BR2_PACKAGE_FBV is not set
-# BR2_PACKAGE_FBSET is not set
-
-#
-# other GUIs
-#
-# BR2_PACKAGE_QT is not set
-BR2_PACKAGE_XSERVER_none=y
-# BR2_PACKAGE_XSERVER_xorg is not set
-# BR2_PACKAGE_XSERVER_tinyx is not set
-
-#
-# X libraries and helper libraries
-#
-# BR2_PACKAGE_ATK is not set
-# BR2_PACKAGE_PANGO is not set
-# BR2_PACKAGE_LIBDRM is not set
-# BR2_PACKAGE_LIBERATION is not set
-BR2_PACKAGE_LIBGLIB2=y
-# BR2_PACKAGE_OPENMOTIF is not set
-# BR2_PACKAGE_FONTCONFIG is not set
-# BR2_PACKAGE_FREETYPE is not set
-# BR2_PACKAGE_TSLIB is not set
-# BR2_PACKAGE_WEBKIT is not set
-
-#
-# X Window managers
-#
-# BR2_PACKAGE_MATCHBOX is not set
-
-#
-# X applications
-#
-# BR2_PACKAGE_ALSAMIXERGUI is not set
-
-#
-# dillo - disabled (requires jpeg,libglib12,libgtk12,zlib,libpng and Xorg(7))
-#
-# BR2_PACKAGE_GQVIEW is not set
-# BR2_PACKAGE_LEAFPAD is not set
-
-#
-# midori - disabled (requires Xorg(7))
-#
-# BR2_PACKAGE_PCMANFM is not set
-# BR2_PACKAGE_SYLPHEED is not set
-# BR2_PACKAGE_TORSMO is not set
-# BR2_PACKAGE_X11VNC is not set
-# BR2_PACKAGE_XPDF is not set
-# BR2_PACKAGE_XSTROKE is not set
-# BR2_PACKAGE_XVKBD is not set
-
-#
-# Compressors / decompressors
-#
-BR2_PACKAGE_LZO=y
-# BR2_PACKAGE_LZMA is not set
-# BR2_PACKAGE_LZMA_HOST is not set
-BR2_PACKAGE_ZLIB=y
-# BR2_PACKAGE_ZLIB_TARGET_HEADERS is not set
-
-#
-# Package managers
-#
-# BR2_PACKAGE_IPKG is not set
-# BR2_PACKAGE_PORTAGE is not set
-
-#
-# Interpreter languages / Scripting
-#
-# BR2_PACKAGE_LUA is not set
-# BR2_PACKAGE_MICROPERL is not set
-# BR2_PACKAGE_PYTHON is not set
-# BR2_PACKAGE_RUBY is not set
-# BR2_PACKAGE_TCL is not set
-# BR2_PACKAGE_PHP is not set
-
-#
-# XML handling
-#
-# BR2_PACKAGE_EXPAT is not set
-# BR2_PACKAGE_EZXML is not set
-# BR2_PACKAGE_LIBXML2 is not set
-# BR2_PACKAGE_LIBXSLT is not set
-# BR2_PACKAGE_XERCES is not set
-
-#
-# Java
-#
-# BR2_PACKAGE_CLASSPATH is not set
-
-#
-# Games
-#
-# BR2_PACKAGE_GNUCHESS is not set
-# BR2_PACKAGE_MAGICCUBE4D is not set
-# BR2_PACKAGE_PRBOOM is not set
-# BR2_PACKAGE_RUBIX is not set
-# BR2_PACKAGE_VICE is not set
-# BR2_PACKAGE_XBOARD is not set
-
-#
-# Target filesystem options
-#
-
-#
-# filesystem for target device
-#
-BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/atstk1005/device_table.txt"
-BR2_ROOTFS_SKELETON_CUSTOM=y
-BR2_ROOTFS_SKELETON_CUSTOM_PATH="target/device/Atmel/atstk1005/target_skeleton"
-# BR2_TARGET_ROOTFS_CRAMFS is not set
-# BR2_TARGET_ROOTFS_CLOOP is not set
-# BR2_TARGET_ROOTFS_EXT2 is not set
-BR2_TARGET_ROOTFS_JFFS2=y
-# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056 is not set
-# BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528 is not set
-# BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_2K_128K is not set
-BR2_TARGET_ROOTFS_JFFS2_FLASH_128=y
-# BR2_TARGET_ROOTFS_JFFS2_FLASH_64 is not set
-# BR2_TARGET_ROOTFS_JFFS2_CUSTOM is not set
-BR2_TARGET_ROOTFS_JFFS2_PAGESIZE=0x1000
-BR2_TARGET_ROOTFS_JFFS2_EBSIZE=0x20000
-BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER=y
-# BR2_JFFS2_TARGET_SREC is not set
-# BR2_TARGET_ROOTFS_JFFS2_PAD is not set
-# BR2_TARGET_ROOTFS_JFFS2_LE is not set
-BR2_TARGET_ROOTFS_JFFS2_BE=y
-# BR2_TARGET_ROOTFS_JFFS2_SQUASH is not set
-# BR2_TARGET_ROOTFS_JFFS2_SUMMARY is not set
-
-
-# BR2_TARGET_ROOTFS_UBIFS is not set
-# BR2_TARGET_ROOTFS_SQUASHFS is not set
-BR2_TARGET_ROOTFS_TAR=y
-BR2_TARGET_ROOTFS_TAR_NONE=y
-# BR2_TARGET_ROOTFS_TAR_GZIP is not set
-# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
-# BR2_TARGET_ROOTFS_TAR_LZMA is not set
-BR2_TARGET_ROOTFS_TAR_OPTIONS=""
-
-# BR2_TARGET_ROOTFS_CPIO is not set
-# BR2_TARGET_ROOTFS_INITRAMFS is not set
-# BR2_TARGET_ROOTFS_ROMFS is not set
-
-#
-# bootloader for target device
-#
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="atngw100"
-BR2_TARGET_UBOOT_2009_01=y
-# BR2_TARGET_UBOOT_2008_10 is not set
-BR2_UBOOT_VERSION="2009.01"
-BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR=""
-# BR2_TARGET_UBOOT_TOOL_MKIMAGE is not set
-# BR2_TARGET_UBOOT_TOOL_ENV is not set
-
-#
-# Kernel
-#
-# BR2_KERNEL_none is not set
-BR2_KERNEL_LINUX_ADVANCED=y
-# BR2_KERNEL_LINUX is not set
-BR2_PACKAGE_LINUX=y
-BR2_PACKAGE_LINUX_KCONFIG="$(BR2_BOARD_PATH)/$(BR2_BOARD_NAME)-linux-$(BR2_LINUX_VERSION).config"
-BR2_PACKAGE_LINUX_FORMAT="uImage"
-BR2_KERNEL_CURRENT_VERSION="2.6.28.2"
-BR2_KERNEL_LATEST_2_6_28="2"
-BR2_KERNEL_LATEST_2_6_27="13"
-BR2_KERNEL_LATEST_2_6_26="8"
-BR2_KERNEL_LATEST_2_6_25="19"
-BR2_KERNEL_LATEST_2_6_24="7"
-BR2_KERNEL_LATEST_2_6_23="17"
-BR2_KERNEL_LATEST_2_6_22="19"
-BR2_KERNEL_LATEST_2_6_21="7"
-BR2_KERNEL_LATEST_2_6_20="21"
-BR2_KERNEL_PATCH_LEVEL="13"
-BR2_KERNEL_NEXT_VERSION="2.6.28"
-BR2_KERNEL_THIS_VERSION="2.6.27"
-BR2_KERNEL_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6"
-BR2_MM_PATCH_SITE="http://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6"
-BR2_RC_MM_PATCH_DIR="$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)/2.6.$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-mm$(BR2_KERNEL_MM_LEVEL)"
-BR2_KERNEL_PATCH_SITE="$(BR2_KERNEL_SITE)"
-# BR2_LINUX_2_6_STABLE is not set
-# BR2_LINUX_2_6_28 is not set
-BR2_LINUX_2_6_27=y
-# BR2_LINUX_2_6_26 is not set
-# BR2_LINUX_2_6_25 is not set
-# BR2_LINUX_2_6_24 is not set
-# BR2_LINUX_2_6_23 is not set
-# BR2_LINUX_2_6_22 is not set
-# BR2_LINUX_2_6_21 is not set
-# BR2_LINUX_2_6_20 is not set
-# BR2_LINUX_2_6_29 is not set
-# BR2_LINUX26_CUSTOM is not set
-
-#
-# Patches
-#
-BR2_KERNEL_ADD_KERNEL_ORG_PATCH=y
-BR2_KERNEL_ADD_LATEST=y
-BR2_KERNEL_ADD_LATEST_MINORPATCH=y
-# BR2_KERNEL_ADD_MINORPATCH is not set
-# BR2_KERNEL_ADD_LATEST_RC_PATCH is not set
-# BR2_KERNEL_ADD_RC_PATCH is not set
-# BR2_KERNEL_ADD_LATEST_SNAPSHOT is not set
-# BR2_KERNEL_ADD_SNAPSHOT is not set
-# BR2_KERNEL_ADD_LATEST_MM_PATCH is not set
-# BR2_KERNEL_ADD_MM_PATCH is not set
-BR2_KERNEL_ADD_PATCH=y
-BR2_KERNEL_ARCH_PATCH_ENABLED=y
-# BR2_ARCH_AVR32_2_6_28_2 is not set
-BR2_ARCH_AVR32_2_6_27_6=y
-BR2_LINUX_BSP_PATCH=""
-BR2_KERNEL_PATCH="patch-$(BR2_DOWNLOAD_LINUX26_VERSION).$(BR2_KERNEL_PATCH_LEVEL).bz2"
-BR2_EXTRA_VERSION=".$(BR2_KERNEL_PATCH_LEVEL)"
-BR2_KERNEL_BASE=y
-BR2_DOWNLOAD_LINUX26_VERSION="$(BR2_KERNEL_THIS_VERSION)"
-BR2_LINUX26_VERSION="$(BR2_KERNEL_THIS_VERSION).$(BR2_KERNEL_PATCH_LEVEL)"
-
-#
-# Linux Kernel Configuration
-#
-BR2_PACKAGE_LINUX_USE_KCONFIG=y
-# BR2_PACKAGE_LINUX_USE_DEFCONFIG is not set
-# BR2_PACKAGE_LINUX_USE_XCONFIG is not set
-# BR2_LINUX_BIN_BZIMAGE is not set
-BR2_LINUX_BIN_UIMAGE=y
-# BR2_LINUX_BIN_VMLINUX is not set
-# BR2_LINUX_BIN_ZIMAGE is not set
-# BR2_LINUX_BIN_CUSTOM is not set
-
-#
-# Destinations for linux kernel binaries
-#
-BR2_LINUX_COPYTO_ROOTFS=y
-# BR2_LINUX_COPYTO_TFTPBOOT is not set
-BR2_LINUX_COPYTO=""
-# BR2_LINUX_COPY_CONFIGURATION is not set
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27.13
-# Thu Jan 29 21:43:57 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
-CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type and features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PORTMUX_GPIO_V2=y
-CONFIG_TIMER_AST=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP720X=y
-CONFIG_CPU_AT32AP7200=y
-CONFIG_BOARD_ATSTK1000=y
-# CONFIG_BOARD_ATNGW100 is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MIMC200 is not set
-# CONFIG_BOARD_ATSTK1002 is not set
-# CONFIG_BOARD_ATSTK1003 is not set
-# CONFIG_BOARD_ATSTK1004 is not set
-CONFIG_BOARD_ATSTK1005=y
-# CONFIG_BOARD_ATSTK1006 is not set
-# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-CONFIG_BOARD_ATSTK1000_J2_LED=y
-CONFIG_BOARD_ATSTK1000_J2_LED8=y
-# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-CONFIG_BOARD_ATSTK1000_EXTDAC=y
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_OWNERSHIP_TRACE is not set
-# CONFIG_NMI_DEBUGGING is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
-CONFIG_BRIDGE=m
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_M25P80=m
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_PARPORT=y
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_UB=y
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_ATMEL_SSC=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-CONFIG_PATA_AT32=m
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NET_POCKET is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-CONFIG_USB_KAWETH=y
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
-# CONFIG_USB_ALI_M5632 is not set
-# CONFIG_USB_AN2720 is not set
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_GPIO=m
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_BUTTERFLY is not set
-# CONFIG_SPI_LM70_LLP is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT32_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_ATMEL=y
-CONFIG_FB_ATMEL_MPOP=y
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_LTV350QV=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_MTS64 is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_PORTMAN2X4 is not set
-CONFIG_SND_SPI=y
-CONFIG_SND_AT73C213=m
-CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-CONFIG_SND_USB=y
-CONFIG_SND_USB_AUDIO=m
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_AT32_SOC=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_WDM=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-# CONFIG_USB_EZUSB is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-CONFIG_USB_LCD=y
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-CONFIG_USB_SISUSBVGA=y
-CONFIG_USB_LD=y
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
-CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-CONFIG_LEDS_GPIO=m
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_AT32AP700X=y
-# CONFIG_RTC_DRV_AVR32_AST is not set
-CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_ATMEL_PDCA=y
-# CONFIG_DW_DMAC is not set
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.2
-# Thu Jan 29 21:40:53 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
-CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-CONFIG_FREEZER=y
-
-#
-# System Type and features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PORTMUX_GPIO_V2=y
-CONFIG_TIMER_AST=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP720X=y
-CONFIG_CPU_AT32AP7200=y
-CONFIG_BOARD_ATSTK1000=y
-# CONFIG_BOARD_ATNGW100 is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MIMC200 is not set
-# CONFIG_BOARD_ATSTK1002 is not set
-# CONFIG_BOARD_ATSTK1003 is not set
-# CONFIG_BOARD_ATSTK1004 is not set
-CONFIG_BOARD_ATSTK1005=y
-# CONFIG_BOARD_ATSTK1006 is not set
-# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-CONFIG_BOARD_ATSTK1000_J2_LED=y
-CONFIG_BOARD_ATSTK1000_J2_LED8=y
-# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-CONFIG_BOARD_ATSTK1000_EXTDAC=y
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_OWNERSHIP_TRACE is not set
-# CONFIG_NMI_DEBUGGING is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
-CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-CONFIG_MTD_M25P80=m
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_PARPORT=y
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_UB=y
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ICS932S401 is not set
-CONFIG_ATMEL_SSC=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-CONFIG_PATA_AT32=m
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_NET_POCKET is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-CONFIG_USB_KAWETH=y
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
-# CONFIG_USB_ALI_M5632 is not set
-# CONFIG_USB_AN2720 is not set
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=m
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_GPIO=m
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_BUTTERFLY is not set
-# CONFIG_SPI_LM70_LLP is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT32_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_ATMEL=y
-CONFIG_FB_ATMEL_MPOP=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_LTV350QV=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_MTS64 is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_PORTMAN2X4 is not set
-CONFIG_SND_SPI=y
-CONFIG_SND_AT73C213=m
-CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-CONFIG_SND_USB=y
-CONFIG_SND_USB_AUDIO=m
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_AT32_SOC=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_WDM=y
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-# CONFIG_USB_EZUSB is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-CONFIG_USB_LCD=y
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-CONFIG_USB_SISUSBVGA=y
-CONFIG_USB_LD=y
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
-CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-CONFIG_LEDS_GPIO=m
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_AT32AP700X=y
-# CONFIG_RTC_DRV_AVR32_AST is not set
-CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_ATMEL_PDCA=y
-# CONFIG_DW_DMAC is not set
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_WRITEBUFFER is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Busybox version: 1.8.2
-# Sun Dec 23 12:11:59 2007
-#
-CONFIG_HAVE_DOT_CONFIG=y
-
-#
-# Busybox Settings
-#
-
-#
-# General Configuration
-#
-# CONFIG_NITPICK is not set
-# CONFIG_DESKTOP is not set
-# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
-# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
-# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
-CONFIG_SHOW_USAGE=y
-CONFIG_FEATURE_VERBOSE_USAGE=y
-# CONFIG_FEATURE_COMPRESS_USAGE is not set
-# CONFIG_FEATURE_INSTALLER is not set
-# CONFIG_LOCALE_SUPPORT is not set
-CONFIG_GETOPT_LONG=y
-CONFIG_FEATURE_DEVPTS=y
-# CONFIG_FEATURE_CLEAN_UP is not set
-# CONFIG_FEATURE_PIDFILE is not set
-CONFIG_FEATURE_SUID=y
-# CONFIG_FEATURE_SUID_CONFIG is not set
-# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
-# CONFIG_SELINUX is not set
-# CONFIG_FEATURE_PREFER_APPLETS is not set
-CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
-CONFIG_FEATURE_SYSLOG=y
-CONFIG_FEATURE_HAVE_RPC=y
-
-#
-# Build Options
-#
-CONFIG_STATIC=y
-CONFIG_BUILD_LIBBUSYBOX=y
-# CONFIG_FEATURE_INDIVIDUAL is not set
-# CONFIG_FEATURE_SHARED_BUSYBOX is not set
-CONFIG_LFS=y
-
-#
-# Debugging Options
-#
-# CONFIG_DEBUG is not set
-# CONFIG_WERROR is not set
-CONFIG_NO_DEBUG_LIB=y
-# CONFIG_DMALLOC is not set
-# CONFIG_EFENCE is not set
-CONFIG_INCLUDE_SUSv2=y
-
-#
-# Installation Options
-#
-# CONFIG_INSTALL_NO_USR is not set
-CONFIG_INSTALL_APPLET_SYMLINKS=y
-# CONFIG_INSTALL_APPLET_HARDLINKS is not set
-# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
-# CONFIG_INSTALL_APPLET_DONT is not set
-# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
-# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
-# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
-CONFIG_PREFIX="/usr/avr32-linux"
-
-#
-# Busybox Library Tuning
-#
-CONFIG_PASSWORD_MINLEN=6
-CONFIG_MD5_SIZE_VS_SPEED=2
-CONFIG_FEATURE_FAST_TOP=y
-# CONFIG_FEATURE_ETC_NETWORKS is not set
-CONFIG_FEATURE_EDITING=y
-CONFIG_FEATURE_EDITING_MAX_LEN=1024
-CONFIG_FEATURE_EDITING_FANCY_KEYS=y
-# CONFIG_FEATURE_EDITING_VI is not set
-CONFIG_FEATURE_EDITING_HISTORY=100
-CONFIG_FEATURE_EDITING_SAVEHISTORY=y
-CONFIG_FEATURE_TAB_COMPLETION=y
-# CONFIG_FEATURE_USERNAME_COMPLETION is not set
-CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
-CONFIG_MONOTONIC_SYSCALL=y
-CONFIG_IOCTL_HEX2STR_ERROR=y
-
-#
-# Applets
-#
-
-#
-# Archival Utilities
-#
-CONFIG_AR=y
-CONFIG_FEATURE_AR_LONG_FILENAMES=y
-CONFIG_BUNZIP2=y
-CONFIG_BZIP2=y
-CONFIG_CPIO=y
-CONFIG_DPKG=y
-CONFIG_DPKG_DEB=y
-# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
-CONFIG_GUNZIP=y
-CONFIG_FEATURE_GUNZIP_UNCOMPRESS=y
-CONFIG_GZIP=y
-CONFIG_RPM2CPIO=y
-CONFIG_RPM=y
-CONFIG_FEATURE_RPM_BZ2=y
-CONFIG_TAR=y
-CONFIG_FEATURE_TAR_CREATE=y
-CONFIG_FEATURE_TAR_BZIP2=y
-CONFIG_FEATURE_TAR_LZMA=y
-CONFIG_FEATURE_TAR_FROM=y
-CONFIG_FEATURE_TAR_GZIP=y
-CONFIG_FEATURE_TAR_COMPRESS=y
-CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
-CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY=y
-CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
-CONFIG_FEATURE_TAR_LONG_OPTIONS=y
-CONFIG_UNCOMPRESS=y
-CONFIG_UNLZMA=y
-CONFIG_FEATURE_LZMA_FAST=y
-CONFIG_UNZIP=y
-
-#
-# Common options for cpio and tar
-#
-# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
-
-#
-# Common options for dpkg and dpkg_deb
-#
-CONFIG_FEATURE_DEB_TAR_GZ=y
-CONFIG_FEATURE_DEB_TAR_BZ2=y
-CONFIG_FEATURE_DEB_TAR_LZMA=y
-
-#
-# Coreutils
-#
-CONFIG_BASENAME=y
-CONFIG_CAL=y
-CONFIG_CAT=y
-CONFIG_CATV=y
-CONFIG_CHGRP=y
-CONFIG_CHMOD=y
-CONFIG_CHOWN=y
-CONFIG_CHROOT=y
-CONFIG_CKSUM=y
-CONFIG_COMM=y
-CONFIG_CP=y
-CONFIG_CUT=y
-CONFIG_DATE=y
-CONFIG_FEATURE_DATE_ISOFMT=y
-CONFIG_DD=y
-CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
-CONFIG_FEATURE_DD_IBS_OBS=y
-CONFIG_DF=y
-CONFIG_DIRNAME=y
-CONFIG_DOS2UNIX=y
-CONFIG_UNIX2DOS=y
-CONFIG_DU=y
-CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
-CONFIG_ECHO=y
-CONFIG_FEATURE_FANCY_ECHO=y
-CONFIG_ENV=y
-CONFIG_FEATURE_ENV_LONG_OPTIONS=y
-CONFIG_EXPAND=y
-CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
-CONFIG_EXPR=y
-CONFIG_EXPR_MATH_SUPPORT_64=y
-CONFIG_FALSE=y
-CONFIG_FOLD=y
-CONFIG_HEAD=y
-CONFIG_FEATURE_FANCY_HEAD=y
-CONFIG_HOSTID=y
-CONFIG_ID=y
-CONFIG_INSTALL=y
-CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
-CONFIG_LENGTH=y
-CONFIG_LN=y
-CONFIG_LOGNAME=y
-CONFIG_LS=y
-CONFIG_FEATURE_LS_FILETYPES=y
-CONFIG_FEATURE_LS_FOLLOWLINKS=y
-CONFIG_FEATURE_LS_RECURSIVE=y
-CONFIG_FEATURE_LS_SORTFILES=y
-CONFIG_FEATURE_LS_TIMESTAMPS=y
-CONFIG_FEATURE_LS_USERNAME=y
-CONFIG_FEATURE_LS_COLOR=y
-CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
-CONFIG_MD5SUM=y
-CONFIG_MKDIR=y
-CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
-CONFIG_MKFIFO=y
-CONFIG_MKNOD=y
-CONFIG_MV=y
-CONFIG_FEATURE_MV_LONG_OPTIONS=y
-CONFIG_NICE=y
-CONFIG_NOHUP=y
-CONFIG_OD=y
-CONFIG_PRINTENV=y
-CONFIG_PRINTF=y
-CONFIG_PWD=y
-CONFIG_READLINK=y
-CONFIG_FEATURE_READLINK_FOLLOW=y
-CONFIG_REALPATH=y
-CONFIG_RM=y
-CONFIG_RMDIR=y
-CONFIG_SEQ=y
-CONFIG_SHA1SUM=y
-CONFIG_SLEEP=y
-CONFIG_FEATURE_FANCY_SLEEP=y
-CONFIG_SORT=y
-CONFIG_FEATURE_SORT_BIG=y
-CONFIG_SPLIT=y
-CONFIG_FEATURE_SPLIT_FANCY=y
-CONFIG_STAT=y
-CONFIG_FEATURE_STAT_FORMAT=y
-CONFIG_STTY=y
-CONFIG_SUM=y
-CONFIG_SYNC=y
-CONFIG_TAIL=y
-CONFIG_FEATURE_FANCY_TAIL=y
-CONFIG_TEE=y
-CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
-CONFIG_TEST=y
-CONFIG_FEATURE_TEST_64=y
-CONFIG_TOUCH=y
-CONFIG_TR=y
-CONFIG_FEATURE_TR_CLASSES=y
-CONFIG_FEATURE_TR_EQUIV=y
-CONFIG_TRUE=y
-CONFIG_TTY=y
-CONFIG_UNAME=y
-CONFIG_UNEXPAND=y
-CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
-CONFIG_UNIQ=y
-CONFIG_USLEEP=y
-CONFIG_UUDECODE=y
-CONFIG_UUENCODE=y
-CONFIG_WC=y
-CONFIG_FEATURE_WC_LARGE=y
-CONFIG_WHO=y
-CONFIG_WHOAMI=y
-CONFIG_YES=y
-
-#
-# Common options for cp and mv
-#
-CONFIG_FEATURE_PRESERVE_HARDLINKS=y
-
-#
-# Common options for ls, more and telnet
-#
-CONFIG_FEATURE_AUTOWIDTH=y
-
-#
-# Common options for df, du, ls
-#
-CONFIG_FEATURE_HUMAN_READABLE=y
-
-#
-# Common options for md5sum, sha1sum
-#
-CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
-
-#
-# Console Utilities
-#
-CONFIG_CHVT=y
-CONFIG_CLEAR=y
-CONFIG_DEALLOCVT=y
-CONFIG_DUMPKMAP=y
-CONFIG_KBD_MODE=y
-CONFIG_LOADFONT=y
-CONFIG_LOADKMAP=y
-CONFIG_OPENVT=y
-CONFIG_RESET=y
-CONFIG_RESIZE=y
-CONFIG_FEATURE_RESIZE_PRINT=y
-CONFIG_SETCONSOLE=y
-CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
-CONFIG_SETKEYCODES=y
-CONFIG_SETLOGCONS=y
-
-#
-# Debian Utilities
-#
-CONFIG_MKTEMP=y
-# CONFIG_PIPE_PROGRESS is not set
-CONFIG_RUN_PARTS=y
-CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
-# CONFIG_FEATURE_RUN_PARTS_FANCY is not set
-CONFIG_START_STOP_DAEMON=y
-CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
-CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
-CONFIG_WHICH=y
-
-#
-# Editors
-#
-CONFIG_AWK=y
-CONFIG_FEATURE_AWK_MATH=y
-CONFIG_CMP=y
-CONFIG_DIFF=y
-CONFIG_FEATURE_DIFF_BINARY=y
-CONFIG_FEATURE_DIFF_DIR=y
-CONFIG_FEATURE_DIFF_MINIMAL=y
-CONFIG_ED=y
-CONFIG_PATCH=y
-CONFIG_SED=y
-CONFIG_VI=y
-CONFIG_FEATURE_VI_MAX_LEN=1024
-CONFIG_FEATURE_VI_COLON=y
-CONFIG_FEATURE_VI_YANKMARK=y
-CONFIG_FEATURE_VI_SEARCH=y
-CONFIG_FEATURE_VI_USE_SIGNALS=y
-CONFIG_FEATURE_VI_DOT_CMD=y
-CONFIG_FEATURE_VI_READONLY=y
-CONFIG_FEATURE_VI_SETOPTS=y
-CONFIG_FEATURE_VI_SET=y
-CONFIG_FEATURE_VI_WIN_RESIZE=y
-CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
-CONFIG_FEATURE_ALLOW_EXEC=y
-
-#
-# Finding Utilities
-#
-CONFIG_FIND=y
-CONFIG_FEATURE_FIND_PRINT0=y
-CONFIG_FEATURE_FIND_MTIME=y
-CONFIG_FEATURE_FIND_MMIN=y
-CONFIG_FEATURE_FIND_PERM=y
-CONFIG_FEATURE_FIND_TYPE=y
-CONFIG_FEATURE_FIND_XDEV=y
-CONFIG_FEATURE_FIND_MAXDEPTH=y
-CONFIG_FEATURE_FIND_NEWER=y
-CONFIG_FEATURE_FIND_INUM=y
-CONFIG_FEATURE_FIND_EXEC=y
-CONFIG_FEATURE_FIND_USER=y
-CONFIG_FEATURE_FIND_GROUP=y
-CONFIG_FEATURE_FIND_NOT=y
-CONFIG_FEATURE_FIND_DEPTH=y
-CONFIG_FEATURE_FIND_PAREN=y
-CONFIG_FEATURE_FIND_SIZE=y
-CONFIG_FEATURE_FIND_PRUNE=y
-CONFIG_FEATURE_FIND_DELETE=y
-CONFIG_FEATURE_FIND_PATH=y
-CONFIG_FEATURE_FIND_REGEX=y
-# CONFIG_FEATURE_FIND_CONTEXT is not set
-CONFIG_GREP=y
-CONFIG_FEATURE_GREP_EGREP_ALIAS=y
-CONFIG_FEATURE_GREP_FGREP_ALIAS=y
-CONFIG_FEATURE_GREP_CONTEXT=y
-CONFIG_XARGS=y
-CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
-CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
-CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
-CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
-
-#
-# Init Utilities
-#
-CONFIG_INIT=y
-# CONFIG_DEBUG_INIT is not set
-CONFIG_FEATURE_USE_INITTAB=y
-CONFIG_FEATURE_INIT_SCTTY=y
-CONFIG_FEATURE_INIT_SYSLOG=y
-CONFIG_FEATURE_EXTRA_QUIET=y
-# CONFIG_FEATURE_INIT_COREDUMPS is not set
-CONFIG_FEATURE_INITRD=y
-CONFIG_HALT=y
-CONFIG_MESG=y
-
-#
-# Login/Password Management Utilities
-#
-CONFIG_FEATURE_SHADOWPASSWDS=y
-# CONFIG_USE_BB_SHADOW is not set
-# CONFIG_USE_BB_PWD_GRP is not set
-CONFIG_ADDGROUP=y
-CONFIG_FEATURE_ADDUSER_TO_GROUP=y
-CONFIG_DELGROUP=y
-CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
-CONFIG_ADDUSER=y
-CONFIG_DELUSER=y
-CONFIG_GETTY=y
-CONFIG_FEATURE_UTMP=y
-CONFIG_FEATURE_WTMP=y
-CONFIG_LOGIN=y
-# CONFIG_PAM is not set
-CONFIG_LOGIN_SCRIPTS=y
-CONFIG_FEATURE_NOLOGIN=y
-CONFIG_FEATURE_SECURETTY=y
-CONFIG_PASSWD=y
-CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
-# CONFIG_CRYPTPW is not set
-# CONFIG_CHPASSWD is not set
-CONFIG_SU=y
-CONFIG_FEATURE_SU_SYSLOG=y
-CONFIG_FEATURE_SU_CHECKS_SHELLS=y
-CONFIG_SULOGIN=y
-CONFIG_VLOCK=y
-
-#
-# Linux Ext2 FS Progs
-#
-CONFIG_CHATTR=y
-CONFIG_FSCK=y
-CONFIG_LSATTR=y
-
-#
-# Linux Module Utilities
-#
-CONFIG_INSMOD=y
-# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
-# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
-# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
-CONFIG_FEATURE_INSMOD_LOAD_MAP=y
-CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL=y
-CONFIG_RMMOD=y
-CONFIG_LSMOD=y
-CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
-CONFIG_MODPROBE=y
-CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS=y
-CONFIG_FEATURE_MODPROBE_FANCY_ALIAS=y
-
-#
-# Options common to multiple modutils
-#
-CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-# CONFIG_FEATURE_2_4_MODULES is not set
-CONFIG_FEATURE_2_6_MODULES=y
-# CONFIG_FEATURE_QUERY_MODULE_INTERFACE is not set
-
-#
-# Linux System Utilities
-#
-CONFIG_DMESG=y
-CONFIG_FEATURE_DMESG_PRETTY=y
-CONFIG_FBSET=y
-CONFIG_FEATURE_FBSET_FANCY=y
-CONFIG_FEATURE_FBSET_READMODE=y
-CONFIG_FDFLUSH=y
-CONFIG_FDFORMAT=y
-CONFIG_FDISK=y
-CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
-CONFIG_FEATURE_FDISK_WRITABLE=y
-# CONFIG_FEATURE_AIX_LABEL is not set
-# CONFIG_FEATURE_SGI_LABEL is not set
-# CONFIG_FEATURE_SUN_LABEL is not set
-# CONFIG_FEATURE_OSF_LABEL is not set
-# CONFIG_FEATURE_FDISK_ADVANCED is not set
-# CONFIG_FREERAMDISK is not set
-# CONFIG_FSCK_MINIX is not set
-# CONFIG_MKFS_MINIX is not set
-# CONFIG_FEATURE_MINIX2 is not set
-CONFIG_GETOPT=y
-CONFIG_HEXDUMP=y
-CONFIG_HWCLOCK=y
-# CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS is not set
-# CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set
-CONFIG_IPCRM=y
-CONFIG_IPCS=y
-CONFIG_LOSETUP=y
-CONFIG_MDEV=y
-CONFIG_FEATURE_MDEV_CONF=y
-CONFIG_FEATURE_MDEV_EXEC=y
-CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
-CONFIG_MKSWAP=y
-# CONFIG_FEATURE_MKSWAP_V0 is not set
-CONFIG_MORE=y
-CONFIG_FEATURE_USE_TERMIOS=y
-CONFIG_MOUNT=y
-CONFIG_FEATURE_MOUNT_HELPERS=y
-CONFIG_FEATURE_MOUNT_NFS=y
-CONFIG_FEATURE_MOUNT_CIFS=y
-CONFIG_FEATURE_MOUNT_FLAGS=y
-CONFIG_FEATURE_MOUNT_FSTAB=y
-CONFIG_PIVOT_ROOT=y
-CONFIG_RDATE=y
-CONFIG_READPROFILE=y
-CONFIG_SETARCH=y
-CONFIG_SWAPONOFF=y
-CONFIG_SWITCH_ROOT=y
-CONFIG_UMOUNT=y
-CONFIG_FEATURE_UMOUNT_ALL=y
-
-#
-# Common options for mount/umount
-#
-CONFIG_FEATURE_MOUNT_LOOP=y
-CONFIG_FEATURE_MTAB_SUPPORT=y
-
-#
-# Miscellaneous Utilities
-#
-# CONFIG_ADJTIMEX is not set
-CONFIG_BBCONFIG=y
-CONFIG_CHRT=y
-CONFIG_CROND=y
-CONFIG_DEBUG_CROND_OPTION=y
-# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
-CONFIG_CRONTAB=y
-CONFIG_DC=y
-# CONFIG_DEVFSD is not set
-# CONFIG_DEVFSD_MODLOAD is not set
-# CONFIG_DEVFSD_FG_NP is not set
-# CONFIG_DEVFSD_VERBOSE is not set
-# CONFIG_FEATURE_DEVFS is not set
-# CONFIG_EJECT is not set
-CONFIG_LAST=y
-CONFIG_LESS=y
-CONFIG_FEATURE_LESS_MAXLINES=9999999
-CONFIG_FEATURE_LESS_BRACKETS=y
-CONFIG_FEATURE_LESS_FLAGS=y
-CONFIG_FEATURE_LESS_FLAGCS=y
-CONFIG_FEATURE_LESS_MARKS=y
-CONFIG_FEATURE_LESS_REGEXP=y
-CONFIG_HDPARM=y
-CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
-CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
-CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
-CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
-CONFIG_MAKEDEVS=y
-# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
-CONFIG_FEATURE_MAKEDEVS_TABLE=y
-CONFIG_MICROCOM=y
-CONFIG_MOUNTPOINT=y
-CONFIG_MT=y
-# CONFIG_RAIDAUTORUN is not set
-# CONFIG_READAHEAD is not set
-CONFIG_RUNLEVEL=y
-CONFIG_RX=y
-CONFIG_STRINGS=y
-CONFIG_SETSID=y
-# CONFIG_TASKSET is not set
-# CONFIG_FEATURE_TASKSET_FANCY is not set
-CONFIG_TIME=y
-CONFIG_TTYSIZE=y
-CONFIG_WATCHDOG=y
-
-#
-# Networking Utilities
-#
-CONFIG_FEATURE_IPV6=y
-# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
-CONFIG_ARP=y
-CONFIG_ARPING=y
-CONFIG_DNSD=y
-CONFIG_ETHER_WAKE=y
-# CONFIG_FAKEIDENTD is not set
-CONFIG_FTPGET=y
-CONFIG_FTPPUT=y
-CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
-CONFIG_HOSTNAME=y
-CONFIG_HTTPD=y
-CONFIG_FEATURE_HTTPD_RANGES=y
-CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
-CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP=y
-CONFIG_FEATURE_HTTPD_SETUID=y
-CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
-CONFIG_FEATURE_HTTPD_AUTH_MD5=y
-CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES=y
-CONFIG_FEATURE_HTTPD_CGI=y
-CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
-CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
-CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
-CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
-CONFIG_FEATURE_HTTPD_PROXY=y
-CONFIG_IFCONFIG=y
-CONFIG_FEATURE_IFCONFIG_STATUS=y
-# CONFIG_FEATURE_IFCONFIG_SLIP is not set
-# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
-CONFIG_FEATURE_IFCONFIG_HW=y
-# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
-CONFIG_IFUPDOWN=y
-CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
-# CONFIG_FEATURE_IFUPDOWN_IP is not set
-# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set
-CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN=y
-CONFIG_FEATURE_IFUPDOWN_IPV4=y
-CONFIG_FEATURE_IFUPDOWN_IPV6=y
-# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
-CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
-CONFIG_INETD=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME=y
-CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN=y
-CONFIG_FEATURE_INETD_RPC=y
-# CONFIG_IP is not set
-# CONFIG_FEATURE_IP_ADDRESS is not set
-# CONFIG_FEATURE_IP_LINK is not set
-# CONFIG_FEATURE_IP_ROUTE is not set
-# CONFIG_FEATURE_IP_TUNNEL is not set
-# CONFIG_FEATURE_IP_RULE is not set
-# CONFIG_FEATURE_IP_SHORT_FORMS is not set
-# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
-# CONFIG_IPADDR is not set
-# CONFIG_IPLINK is not set
-# CONFIG_IPROUTE is not set
-# CONFIG_IPTUNNEL is not set
-# CONFIG_IPRULE is not set
-# CONFIG_IPCALC is not set
-# CONFIG_FEATURE_IPCALC_FANCY is not set
-# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set
-# CONFIG_NAMEIF is not set
-# CONFIG_NC is not set
-# CONFIG_NC_SERVER is not set
-# CONFIG_NC_EXTRA is not set
-CONFIG_NETSTAT=y
-CONFIG_FEATURE_NETSTAT_WIDE=y
-CONFIG_NSLOOKUP=y
-CONFIG_PING=y
-CONFIG_PING6=y
-CONFIG_PSCAN=y
-CONFIG_FEATURE_FANCY_PING=y
-CONFIG_ROUTE=y
-# CONFIG_SLATTACH is not set
-CONFIG_TELNET=y
-CONFIG_FEATURE_TELNET_TTYPE=y
-CONFIG_FEATURE_TELNET_AUTOLOGIN=y
-CONFIG_TELNETD=y
-CONFIG_FEATURE_TELNETD_STANDALONE=y
-CONFIG_TFTP=y
-CONFIG_FEATURE_TFTP_GET=y
-CONFIG_FEATURE_TFTP_PUT=y
-CONFIG_FEATURE_TFTP_BLOCKSIZE=y
-# CONFIG_DEBUG_TFTP is not set
-CONFIG_TRACEROUTE=y
-CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
-# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
-# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
-CONFIG_APP_UDHCPD=y
-# CONFIG_APP_DHCPRELAY is not set
-# CONFIG_APP_DUMPLEASES is not set
-# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
-CONFIG_APP_UDHCPC=y
-# CONFIG_FEATURE_UDHCP_DEBUG is not set
-# CONFIG_FEATURE_RFC3397 is not set
-CONFIG_VCONFIG=y
-CONFIG_WGET=y
-CONFIG_FEATURE_WGET_STATUSBAR=y
-CONFIG_FEATURE_WGET_AUTHENTICATION=y
-# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
-# CONFIG_ZCIP is not set
-
-#
-# Process Utilities
-#
-CONFIG_FREE=y
-CONFIG_FUSER=y
-CONFIG_KILL=y
-CONFIG_KILLALL=y
-CONFIG_KILLALL5=y
-CONFIG_NMETER=y
-CONFIG_PGREP=y
-CONFIG_PIDOF=y
-CONFIG_FEATURE_PIDOF_SINGLE=y
-CONFIG_FEATURE_PIDOF_OMIT=y
-CONFIG_PKILL=y
-CONFIG_PS=y
-CONFIG_FEATURE_PS_WIDE=y
-CONFIG_RENICE=y
-CONFIG_BB_SYSCTL=y
-CONFIG_TOP=y
-CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
-CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
-CONFIG_FEATURE_TOP_DECIMALS=y
-CONFIG_FEATURE_TOPMEM=y
-CONFIG_UPTIME=y
-CONFIG_WATCH=y
-
-#
-# Shells
-#
-CONFIG_FEATURE_SH_IS_ASH=y
-# CONFIG_FEATURE_SH_IS_HUSH is not set
-# CONFIG_FEATURE_SH_IS_LASH is not set
-# CONFIG_FEATURE_SH_IS_MSH is not set
-# CONFIG_FEATURE_SH_IS_NONE is not set
-CONFIG_ASH=y
-
-#
-# Ash Shell Options
-#
-CONFIG_ASH_JOB_CONTROL=y
-CONFIG_ASH_READ_NCHARS=y
-CONFIG_ASH_READ_TIMEOUT=y
-CONFIG_ASH_ALIAS=y
-CONFIG_ASH_MATH_SUPPORT=y
-CONFIG_ASH_MATH_SUPPORT_64=y
-CONFIG_ASH_GETOPTS=y
-CONFIG_ASH_BUILTIN_ECHO=y
-CONFIG_ASH_BUILTIN_TEST=y
-# CONFIG_ASH_CMDCMD is not set
-# CONFIG_ASH_MAIL is not set
-CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
-# CONFIG_ASH_RANDOM_SUPPORT is not set
-CONFIG_ASH_EXPAND_PRMT=y
-# CONFIG_HUSH is not set
-# CONFIG_HUSH_HELP is not set
-# CONFIG_HUSH_INTERACTIVE is not set
-# CONFIG_HUSH_JOB is not set
-# CONFIG_HUSH_TICK is not set
-# CONFIG_HUSH_IF is not set
-# CONFIG_HUSH_LOOPS is not set
-# CONFIG_LASH is not set
-# CONFIG_MSH is not set
-
-#
-# Bourne Shell Options
-#
-# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
-# CONFIG_FEATURE_SH_STANDALONE is not set
-# CONFIG_CTTYHACK is not set
-
-#
-# System Logging Utilities
-#
-CONFIG_SYSLOGD=y
-CONFIG_FEATURE_ROTATE_LOGFILE=y
-# CONFIG_FEATURE_REMOTE_LOG is not set
-# CONFIG_FEATURE_IPC_SYSLOG is not set
-CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=
-# CONFIG_LOGREAD is not set
-# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
-CONFIG_KLOGD=y
-CONFIG_LOGGER=y
-
-#
-# Runit Utilities
-#
-# CONFIG_RUNSV is not set
-# CONFIG_RUNSVDIR is not set
-# CONFIG_SV is not set
-# CONFIG_SVLOGD is not set
-# CONFIG_CHPST is not set
-# CONFIG_SETUIDGID is not set
-# CONFIG_ENVUIDGID is not set
-# CONFIG_ENVDIR is not set
-# CONFIG_SOFTLIMIT is not set
-# CONFIG_CHCON is not set
-# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
-# CONFIG_GETENFORCE is not set
-# CONFIG_GETSEBOOL is not set
-# CONFIG_LOAD_POLICY is not set
-# CONFIG_MATCHPATHCON is not set
-# CONFIG_RESTORECON is not set
-# CONFIG_RUNCON is not set
-# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
-# CONFIG_SELINUXENABLED is not set
-# CONFIG_SETENFORCE is not set
-# CONFIG_SETFILES is not set
-# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
-# CONFIG_SETSEBOOL is not set
-
-#
-# ipsvd utilities
-#
-# CONFIG_TCPSVD is not set
-# CONFIG_UDPSVD is not set
+++ /dev/null
-# When building a target filesystem, it is desirable to not have to become
-# root and then run 'mknod' a thousand times. Using a device table you can
-# create device nodes and directories "on the fly".
-#
-# This is a sample device table file for use with genext2fs. You can do all
-# sorts of interesting things with a device table file. For example, if you
-# want to adjust the permissions on a particular file you can just add an
-# entry like:
-# /sbin/foobar f 2755 0 0 - - - - -
-# and (assuming the file /sbin/foobar exists) it will be made setuid root
-# (regardless of what its permissions are on the host filesystem.
-# Furthermore, you can use a single table entry to create a many device
-# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15] I
-# could just use the following two table entries:
-# /dev/hda b 640 0 0 3 0 0 0 -
-# /dev/hda b 640 0 0 3 1 1 1 15
-#
-# Device table entries take the form of:
-# <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-# where name is the file name, type can be one of:
-# f A regular file
-# d Directory
-# c Character special device file
-# b Block special device file
-# p Fifo (named pipe)
-# uid is the user id for the target file, gid is the group id for the target
-# file. The rest of the entries (major, minor, etc) apply only to device
-# special files.
-
-# Have fun
-# -Erik Andersen <andersen@codepoet.org>
-#
-
-#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-/dev d 755 0 0 - - - - -
-#/dev/pts d 755 0 0 - - - - -
-#/dev/shm d 755 0 0 - - - - -
-/tmp d 1777 0 0 - - - - -
-/etc d 755 0 0 - - - - -
-/sys d 755 0 0 - - - - -
-/config d 755 0 0 - - - - -
-/proc d 755 0 0 - - - - -
-/lost+found d 700 0 0 - - - - -
-/var/lock d 1777 0 0 - - - - -
-/var/log d 755 0 0 - - - - -
-/var/run d 1777 0 0 - - - - -
-/var/tmp d 1777 0 0 - - - - -
-/home/avr32 d 2755 500 500 - - - - -
-/home/default d 2755 1000 1000 - - - - -
-/media d 755 0 0 - - - - -
-/www d 755 0 0 - - - - -
-#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
-/bin/busybox f 4755 0 0 - - - - -
-#/etc/shadow f 600 0 0 - - - - -
-/etc/passwd f 644 0 0 - - - - -
-/etc/network/if-up.d d 755 0 0 - - - - -
-/etc/network/if-pre-up.d d 755 0 0 - - - - -
-/etc/network/if-down.d d 755 0 0 - - - - -
-/etc/network/if-post-down.d d 755 0 0 - - - - -
-# uncomment this to allow starting x as non-root
-#/usr/X11R6/bin/Xfbdev f 4755 0 0 - - - - -
-# Normal system devices
-#/dev/mem c 640 0 0 1 1 0 0 -
-#/dev/kmem c 640 0 0 1 2 0 0 -
-/dev/null c 666 0 0 1 3 0 0 -
-#/dev/zero c 666 0 0 1 5 0 0 -
-#/dev/random c 666 0 0 1 8 0 0 -
-#/dev/urandom c 666 0 0 1 9 0 0 -
-#/dev/ram b 640 0 0 1 1 0 0 -
-#/dev/ram b 640 0 0 1 0 0 1 4
-#/dev/loop b 640 0 0 7 0 0 1 2
-#/dev/rtc c 640 0 0 10 135 - - -
-/dev/console c 666 0 0 5 1 - - -
-#/dev/tty c 666 0 0 5 0 - - -
-#/dev/tty c 666 0 0 4 0 0 1 8
-#/dev/ttyp c 666 0 0 3 0 0 1 10
-#/dev/ptyp c 666 0 0 2 0 0 1 10
-#/dev/ptmx c 666 0 0 5 2 - - -
-#/dev/ttyP c 666 0 0 57 0 0 1 4
-#/dev/ttyS c 666 0 0 4 64 0 1 4
-#/dev/fb c 640 0 5 29 0 0 32 4
-#/dev/ttySA c 666 0 0 204 5 0 1 3
-#/dev/psaux c 666 0 0 10 1 0 0 -
-#/dev/ppp c 666 0 0 108 0 - - -
-
-# Input stuff
-#/dev/input d 755 0 0 - - - - -
-#/dev/input/mice c 640 0 0 13 63 0 0 -
-#/dev/input/mouse c 660 0 0 13 32 0 1 4
-#/dev/input/event c 660 0 0 13 64 0 1 4
-#/dev/input/js c 660 0 0 13 0 0 1 4
-
-
-# MTD stuff
-#/dev/mtd c 640 0 0 90 0 0 2 4
-#/dev/mtdblock b 640 0 0 31 0 0 1 4
-
-#Tun/tap driver
-#/dev/net d 755 0 0 - - - - -
-#/dev/net/tun c 660 0 0 10 200 - - -
-
-# Audio stuff
-#/dev/audio c 666 0 29 14 4 - - -
-#/dev/audio1 c 666 0 29 14 20 - - -
-#/dev/dsp c 666 0 29 14 3 - - -
-#/dev/dsp1 c 666 0 29 14 19 - - -
-#/dev/sndstat c 666 0 29 14 6 - - -
-
-# User-mode Linux stuff
-#/dev/ubda b 640 0 0 98 0 0 0 -
-#/dev/ubda b 640 0 0 98 1 1 1 15
-
-# IDE Devices
-#/dev/hda b 640 0 0 3 0 0 0 -
-#/dev/hda b 640 0 0 3 1 1 1 15
-#/dev/hdb b 640 0 0 3 64 0 0 -
-#/dev/hdb b 640 0 0 3 65 1 1 15
-#/dev/hdc b 640 0 0 22 0 0 0 -
-#/dev/hdc b 640 0 0 22 1 1 1 15
-#/dev/hdd b 640 0 0 22 64 0 0 -
-#/dev/hdd b 640 0 0 22 65 1 1 15
-#/dev/hde b 640 0 0 33 0 0 0 -
-#/dev/hde b 640 0 0 33 1 1 1 15
-#/dev/hdf b 640 0 0 33 64 0 0 -
-#/dev/hdf b 640 0 0 33 65 1 1 15
-#/dev/hdg b 640 0 0 34 0 0 0 -
-#/dev/hdg b 640 0 0 34 1 1 1 15
-#/dev/hdh b 640 0 0 34 64 0 0 -
-#/dev/hdh b 640 0 0 34 65 1 1 15
-
-# SCSI Devices
-#/dev/sda b 640 0 0 8 0 0 0 -
-#/dev/sda b 640 0 0 8 1 1 1 15
-#/dev/sdb b 640 0 0 8 16 0 0 -
-#/dev/sdb b 640 0 0 8 17 1 1 15
-#/dev/sdc b 640 0 0 8 32 0 0 -
-#/dev/sdc b 640 0 0 8 33 1 1 15
-#/dev/sdd b 640 0 0 8 48 0 0 -
-#/dev/sdd b 640 0 0 8 49 1 1 15
-#/dev/sde b 640 0 0 8 64 0 0 -
-#/dev/sde b 640 0 0 8 65 1 1 15
-#/dev/sdf b 640 0 0 8 80 0 0 -
-#/dev/sdf b 640 0 0 8 81 1 1 15
-#/dev/sdg b 640 0 0 8 96 0 0 -
-#/dev/sdg b 640 0 0 8 97 1 1 15
-#/dev/sdh b 640 0 0 8 112 0 0 -
-#/dev/sdh b 640 0 0 8 113 1 1 15
-#/dev/sg c 640 0 0 21 0 0 1 15
-#/dev/scd b 640 0 0 11 0 0 1 15
-#/dev/st c 640 0 0 9 0 0 1 8
-#/dev/nst c 640 0 0 9 128 0 1 8
-#/dev/st c 640 0 0 9 32 1 1 4
-#/dev/st c 640 0 0 9 64 1 1 4
-#/dev/st c 640 0 0 9 96 1 1 4
-
-# Floppy disk devices
-#/dev/fd b 640 0 0 2 0 0 1 2
-#/dev/fd0d360 b 640 0 0 2 4 0 0 -
-#/dev/fd1d360 b 640 0 0 2 5 0 0 -
-#/dev/fd0h1200 b 640 0 0 2 8 0 0 -
-#/dev/fd1h1200 b 640 0 0 2 9 0 0 -
-#/dev/fd0u1440 b 640 0 0 2 28 0 0 -
-#/dev/fd1u1440 b 640 0 0 2 29 0 0 -
-#/dev/fd0u2880 b 640 0 0 2 32 0 0 -
-#/dev/fd1u2880 b 640 0 0 2 33 0 0 -
-
-# All the proprietary cdrom devices in the world
-#/dev/aztcd b 640 0 0 29 0 0 0 -
-#/dev/bpcd b 640 0 0 41 0 0 0 -
-#/dev/capi20 c 640 0 0 68 0 0 1 2
-#/dev/cdu31a b 640 0 0 15 0 0 0 -
-#/dev/cdu535 b 640 0 0 24 0 0 0 -
-#/dev/cm206cd b 640 0 0 32 0 0 0 -
-#/dev/sjcd b 640 0 0 18 0 0 0 -
-#/dev/sonycd b 640 0 0 15 0 0 0 -
-#/dev/gscd b 640 0 0 16 0 0 0 -
-#/dev/sbpcd b 640 0 0 25 0 0 0 -
-#/dev/sbpcd b 640 0 0 25 0 0 1 4
-#/dev/mcd b 640 0 0 23 0 0 0 -
-#/dev/optcd b 640 0 0 17 0 0 0 -
-
+++ /dev/null
-state.at73c213_0 {
- control.1 {
- comment.access 'read write'
- comment.type INTEGER
- comment.count 2
- comment.range '0 - 31'
- iface MIXER
- name 'Master Playback Volume'
- value.0 21
- value.1 21
- }
- control.2 {
- comment.access 'read write'
- comment.type BOOLEAN
- comment.count 2
- iface MIXER
- name 'Master Playback Switch'
- value.0 true
- value.1 true
- }
- control.3 {
- comment.access 'read write'
- comment.type INTEGER
- comment.count 2
- comment.range '0 - 31'
- iface MIXER
- name 'PCM Playback Volume'
- value.0 21
- value.1 21
- }
- control.4 {
- comment.access 'read write'
- comment.type BOOLEAN
- comment.count 2
- iface MIXER
- name 'PCM Playback Switch'
- value.0 true
- value.1 true
- }
- control.5 {
- comment.access 'read write'
- comment.type BOOLEAN
- comment.count 1
- iface MIXER
- name 'Mono PA Playback Switch'
- value true
- }
- control.6 {
- comment.access 'read write'
- comment.type INTEGER
- comment.count 1
- comment.range '0 - 14'
- iface MIXER
- name 'PA Playback Volume'
- value 10
- }
- control.7 {
- comment.access 'read write'
- comment.type BOOLEAN
- comment.count 1
- iface MIXER
- name 'PA High Gain Playback Switch'
- value true
- }
- control.8 {
- comment.access 'read write'
- comment.type BOOLEAN
- comment.count 1
- iface MIXER
- name 'PA Playback Switch'
- value true
- }
- control.9 {
- comment.access 'read write'
- comment.type INTEGER
- comment.count 1
- comment.range '14 - 31'
- iface MIXER
- name 'Aux Capture Volume'
- value 14
- }
- control.10 {
- comment.access 'read write'
- comment.type BOOLEAN
- comment.count 1
- iface MIXER
- name 'Aux Capture Switch'
- value false
- }
- control.11 {
- comment.access 'read write'
- comment.type INTEGER
- comment.count 2
- comment.range '14 - 31'
- iface MIXER
- name 'Line Capture Volume'
- value.0 14
- value.1 14
- }
- control.12 {
- comment.access 'read write'
- comment.type BOOLEAN
- comment.count 1
- iface MIXER
- name 'Line Capture Switch'
- value false
- }
-}
+++ /dev/null
-# servers to check. (Separate multiple servers with spaces.)
-NTPSERVERS="pool.ntp.org"
-#
-# additional options for ntpdate
-#NTPOPTIONS="-v"
-NTPOPTIONS="-u"
+++ /dev/null
-# Configuration file for dnsmasq.
-#
-# Format is one option per line, legal options are the same
-# as the long options legal on the command line. See
-# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.
-
-# The following two options make you a better netizen, since they
-# tell dnsmasq to filter out queries which the public DNS cannot
-# answer, and which load the servers (especially the root servers)
-# uneccessarily. If you have a dial-on-demand link they also stop
-# these requests from bringing up the link uneccessarily.
-
-# Never forward plain names (without a dot or domain part)
-domain-needed
-# Never forward addresses in the non-routed address spaces.
-bogus-priv
-
-
-# Uncomment this to filter useless windows-originated DNS requests
-# which can trigger dial-on-demand links needlessly.
-# Note that (amongst other things) this blocks all SRV requests,
-# so don't use it if you use eg Kerberos.
-# This option only affects forwarding, SRV records originating for
-# dnsmasq (via srv-host= lines) are not suppressed by it.
-#filterwin2k
-
-# Change this line if you want dns to get its upstream servers from
-# somewhere other that /etc/resolv.conf
-#resolv-file=
-
-# By default, dnsmasq will send queries to any of the upstream
-# servers it knows about and tries to favour servers to are known
-# to be up. Uncommenting this forces dnsmasq to try each query
-# with each server strictly in the order they appear in
-# /etc/resolv.conf
-#strict-order
-
-# If you don't want dnsmasq to read /etc/resolv.conf or any other
-# file, getting its servers from this file instead (see below), then
-# uncomment this
-#no-resolv
-
-# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv
-# files for changes and re-read them then uncomment this.
-#no-poll
-
-# Add other name servers here, with domain specs if they are for
-# non-public domains.
-#server=/localnet/192.168.0.1
-
-# Add local-only domains here, queries in these domains are answered
-# from /etc/hosts or DHCP only.
-#local=/localnet/
-
-# Add domains which you want to force to an IP address here.
-# The example below send any host in doubleclick.net to a local
-# webserver.
-#address=/doubleclick.net/127.0.0.1
-
-# If you want dnsmasq to change uid and gid to something other
-# than the default, edit the following lines.
-user=dnsmasq
-#group=
-
-# If you want dnsmasq to listen for DHCP and DNS requests only on
-# specified interfaces (and the loopback) give the name of the
-# interface (eg eth0) here.
-# Repeat the line for more than one interface.
-interface=eth1
-# Or you can specify which interface _not_ to listen on
-except-interface=eth0
-# Or which to listen on by address (remember to include 127.0.0.1 if
-# you use this.)
-#listen-address=
-# If you want dnsmasq to provide only DNS service on an interface,
-# configure it as shown above, and then use the following line to
-# disable DHCP on it.
-#no-dhcp-interface=
-
-# On systems which support it, dnsmasq binds the wildcard address,
-# even when it is listening on only some interfaces. It then discards
-# requests that it shouldn't reply to. This has the advantage of
-# working even when interfaces come and go and change address. If you
-# want dnsmasq to really bind only the interfaces it is listening on,
-# uncomment this option. About the only time you may need this is when
-# running another nameserver on the same machine.
-#bind-interfaces
-
-# If you don't want dnsmasq to read /etc/hosts, uncomment the
-# following line.
-#no-hosts
-# or if you want it to read another file, as well as /etc/hosts, use
-# this.
-addn-hosts=/etc/hosts.dnsmasq
-
-# Set this (and domain: see below) if you want to have a domain
-# automatically added to simple names in a hosts-file.
-#expand-hosts
-
-# Set the domain for dnsmasq. this is optional, but if it is set, it
-# does the following things.
-# 1) Allows DHCP hosts to have fully qualified domain names, as long
-# as the domain part matches this setting.
-# 2) Sets the "domain" DHCP option thereby potentially setting the
-# domain of all systems configured by DHCP
-# 3) Provides the domain part for "expand-hosts"
-domain=example.net
-
-# Uncomment this to enable the integrated DHCP server, you need
-# to supply the range of addresses available for lease and optionally
-# a lease time. If you have more than one network, you will need to
-# repeat this for each network on which you want to supply DHCP
-# service.
-#dhcp-range=192.168.0.50,192.168.0.150,12h
-
-# This is an example of a DHCP range where the netmask is given. This
-# is needed for networks we reach the dnsmasq DHCP server via a relay
-# agent. If you don't know what a DHCP relay agent is, you probably
-# don't need to worry about this.
-dhcp-range=10.0.0.20,10.0.0.254,255.255.255.0,72h
-
-# This is an example of a DHCP range with a network-id, so that
-# some DHCP options may be set only for this network.
-#dhcp-range=red,192.168.0.50,192.168.0.150
-
-# Supply parameters for specified hosts using DHCP. There are lots
-# of valid alternatives, so we will give examples of each. Note that
-# IP addresses DO NOT have to be in the range given above, they just
-# need to be on the same network. The order of the parameters in these
-# do not matter, it's permissble to give name,adddress and MAC in any order
-
-# Always allocate the host with ethernet address 11:22:33:44:55:66
-# The IP address 192.168.0.60
-#dhcp-host=11:22:33:44:55:66,192.168.0.60
-
-# Always set the name of the host with hardware address
-# 11:22:33:44:55:66 to be "fred"
-#dhcp-host=11:22:33:44:55:66,fred
-
-# Always give the host with ethernet address 11:22:33:44:55:66
-# the name fred and IP address 192.168.0.60 and lease time 45 minutes
-#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m
-
-# Give the machine which says it's name is "bert" IP address
-# 192.168.0.70 and an infinite lease
-#dhcp-host=bert,192.168.0.70,infinite
-
-# Always give the host with client identifier 01:02:02:04
-# the IP address 192.168.0.60
-#dhcp-host=id:01:02:02:04,192.168.0.60
-
-# Always give the host with client identifier "marjorie"
-# the IP address 192.168.0.60
-#dhcp-host=id:marjorie,192.168.0.60
-
-# Enable the address given for "judge" in /etc/hosts
-# to be given to a machine presenting the name "judge" when
-# it asks for a DHCP lease.
-#dhcp-host=judge
-
-# Never offer DHCP service to a machine whose ethernet
-# address is 11:22:33:44:55:66
-#dhcp-host=11:22:33:44:55:66,ignore
-
-# Ignore any client-id presented by the machine with ethernet
-# address 11:22:33:44:55:66. This is useful to prevent a machine
-# being treated differently when running under different OS's or
-# between PXE boot and OS boot.
-#dhcp-host=11:22:33:44:55:66,id:*
-
-# Send extra options which are tagged as "red" to
-# the machine with ethernet address 11:22:33:44:55:66
-#dhcp-host=11:22:33:44:55:66,net:red
-
-# Send extra options which are tagged as "red" to
-# any machine with ethernet address starting 11:22:33:
-#dhcp-host=11:22:33:*:*:*,net:red
-
-# Send extra options which are tagged as "red" to any machine whose
-# DHCP vendorclass string includes the substring "Linux"
-#dhcp-vendorclass=red,Linux
-
-# Send extra options which are tagged as "red" to any machine one
-# of whose DHCP userclass strings includes the substring "accounts"
-#dhcp-userclass=red,accounts
-
-# Send extra options which are tagged as "red" to any machine whose
-# MAC address matches the pattern.
-#dhcp-mac=red,00:60:8C:*:*:*
-
-# If this line is uncommented, dnsmasq will read /etc/ethers and act
-# on the ethernet-address/IP pairs found there just as if they had
-# been given as --dhcp-host options. Useful if you keep
-# MAC-address/host mappings there for other purposes.
-read-ethers
-
-# Send options to hosts which ask for a DHCP lease.
-# See RFC 2132 for details of available options.
-# Note that all the common settings, such as netmask and
-# broadcast address, DNS server and default route, are given
-# sane defaults by dnsmasq. You very likely will not need any
-# any dhcp-options. If you use Windows clients and Samba, there
-# are some options which are recommended, they are detailed at the
-# end of this section.
-# For reference, the common options are:
-# subnet mask - 1
-# default router - 3
-# DNS server - 6
-# broadcast address - 28
-
-# Override the default route supplied by dnsmasq, which assumes the
-# router is the same machine as the one running dnsmasq.
-#dhcp-option=3,1.2.3.4
-
-# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
-#dhcp-option=42,192.168.0.4,10.10.0.5
-
-# Set the NTP time server address to be the same machine as
-# is running dnsmasq
-dhcp-option=42,0.0.0.0
-
-# Set the NIS domain name to "welly"
-#dhcp-option=40,welly
-
-# Set the default time-to-live to 50
-#dhcp-option=23,50
-
-# Set the "all subnets are local" flag
-#dhcp-option=27,1
-
-# Send the etherboot magic flag and then etherboot options (a string).
-#dhcp-option=128,e4:45:74:68:00:00
-#dhcp-option=129,NIC=eepro100
-
-# Specify an option which will only be sent to the "red" network
-# (see dhcp-range for the declaration of the "red" network)
-#dhcp-option=red,42,192.168.1.1
-
-# The following DHCP options set up dnsmasq in the same way as is specified
-# for the ISC dhcpcd in
-# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt
-# adapted for a typical dnsmasq installation where the host running
-# dnsmasq is also the host running samba.
-# you may want to uncomment them if you use Windows clients and Samba.
-dhcp-option=19,0 # option ip-forwarding off
-dhcp-option=44,0.0.0.0 # set netbios-over-TCP/IP nameserver(s) aka WINS server(s)
-dhcp-option=45,0.0.0.0 # netbios datagram distribution server
-dhcp-option=46,8 # netbios node type
-dhcp-option=47 # empty netbios scope.
-
-# Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client
-# probably doesn't support this......
-#dhcp-option=119,eng.apple.com,marketing.apple.com
-
-# Send RFC-3442 classless static routes (note the netmask encoding)
-#dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8
-
-# Send encapsulated vendor-class specific options. The vendor-class
-# is sent as DHCP option 60, and all the options marked with the
-# vendor class are send encapsulated in DHCP option 43. The meaning of
-# the options is defined by the vendor-class. This example sets the
-# mtftp address to 0.0.0.0 for PXEClients
-#dhcp-option=vendor:PXEClient,1,0.0.0.0
-
-# Set the boot filename and tftpd server name and address
-# for BOOTP. You will only need this is you want to
-# boot machines over the network.
-#dhcp-boot=/var/ftpd/pxelinux.0,boothost,192.168.0.3
-
-# Set the limit on DHCP leases, the default is 150
-#dhcp-lease-max=150
-
-# The DHCP server needs somewhere on disk to keep its lease database.
-# This defaults to a sane location, but if you want to change it, use
-# the line below.
-dhcp-leasefile=/var/lib/dnsmasq/dnsmasq.leases
-
-# Set the DHCP server to authoritative mode. In this mode it will barge in
-# and take over the lease for any client which broadcasts on the network,
-# whether it has a record of the lease or not. This avoids long timeouts
-# when a machine wakes up on a new network. DO NOT enable this if there's
-# the slighest chance that you might end up accidentally configuring a DHCP
-# server for your campus/company accidentally. The ISC server uses the same
-# the same option, and this URL provides more information:
-# http://www.isc.org/index.pl?/sw/dhcp/authoritative.php
-dhcp-authoritative
-
-# Run an executable when a DHCP lease is created or destroyed.
-# The arguments sent to the script are "add" or "del",
-# then the MAC address, the IP address and finally the hostname
-# if there is one.
-#dhcp-script=/bin/echo
-
-# Set the cachesize here.
-#cache-size=150
-
-# If you want to disable negative caching, uncomment this.
-#no-negcache
-
-# Normally responses which come form /etc/hosts and the DHCP lease
-# file have Time-To-Live set as zero, which conventionally means
-# do not cache further. If you are happy to trade lower load on the
-# server for potentially stale date, you can set a time-to-live (in
-# seconds) here.
-#local-ttl=
-
-# If you want dnsmasq to detect attempts by Verisign to send queries
-# to unregistered .com and .net hosts to its sitefinder service and
-# have dnsmasq instead return the correct NXDOMAIN response, uncomment
-# this line. You can add similar lines to do the same for other
-# registries which have implemented wildcard A records.
-#bogus-nxdomain=64.94.110.11
-
-# If you want to fix up DNS results from upstream servers, use the
-# alias option. This only works for IPv4.
-# This alias makes a result of 1.2.3.4 appear as 5.6.7.8
-#alias=1.2.3.4,5.6.7.8
-# and this maps 1.2.3.x to 5.6.7.x
-#alias=1.2.3.0,5.6.7.0,255.255.255.0
-
-
-# Change these lines if you want dnsmasq to serve MX records.
-
-# Return an MX record named "maildomain.com" with target
-# servermachine.com and preference 50
-#mx-host=maildomain.com,servermachine.com,50
-
-# Set the default target for MX records created using the localmx option.
-#mx-target=servermachine.com
-
-# Return an MX record pointing to the mx-target for all local
-# machines.
-#localmx
-
-# Return an MX record pointing to itself for all local machines.
-#selfmx
-
-# Change the following lines if you want dnsmasq to serve SRV
-# records. These are useful if you want to serve ldap requests for
-# Active Directory and other windows-originated DNS requests.
-# See RFC 2782.
-# You may add multiple srv-host lines.
-# The fields are <name>,<target>,<port>,<priority>,<weight>
-# If the domain part if missing from the name (so that is just has the
-# service and protocol sections) then the domain given by the domain=
-# config option is used. (Note that expand-hosts does not need to be
-# set for this to work.)
-
-# A SRV record sending LDAP for the example.com domain to
-# ldapserver.example.com port 289
-#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389
-
-# A SRV record sending LDAP for the example.com domain to
-# ldapserver.example.com port 289 (using domain=)
-#domain=example.com
-#srv-host=_ldap._tcp,ldapserver.example.com,389
-
-# Two SRV records for LDAP, each with different priorities
-#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1
-#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2
-
-# A SRV record indicating that there is no LDAP server for the domain
-# example.com
-#srv-host=_ldap._tcp.example.com
-
-
-# Change the following lines to enable dnsmasq to serve TXT records.
-# These are used for things like SPF and zeroconf. (Note that the
-# domain-name expansion done for SRV records _does_not
-# occur for TXT records.)
-
-#Example SPF.
-#txt-record=example.com,v=spf1 a -all
-
-#Example zeroconf
-#txt-record=_http._tcp.example.com,name=value,paper=A4
-
-
-# For debugging purposes, log each DNS query as it passes through
-# dnsmasq.
-#log-queries
-
-# Include a another lot of configuration options.
-#conf-file=/etc/dnsmasq.more.conf
-
+++ /dev/null
-mode "320x240-68"
- # D: 6.891 MHz, H: 17.852 kHz, V: 68.400 Hz
- geometry 320 240 320 240 24
- timings 145116 17 33 10 10 16 1
-endmode
+++ /dev/null
-# /etc/fstab: static file system information.
-#
-# <file system> <mount pt> <type> <options> <dump> <pass>
+++ /dev/null
-root::0:
-daemon:x:1:
-bin:x:2:
-sys:x:3:
-adm:x:4:
-tty:x:5:
-disk:x:6:
-kmem:x:9:
-wheel:x:10:root
-dialout:x:20:
-utmp:x:43:
-staff:x:50:
-www-data::51:
-ftp::52:
-haldaemon:x:68:
-dbus:x:81:
-audio::101:
-users::500:
-default::1000:
-nogroup::65534:
+++ /dev/null
-stk1000.example.net
+++ /dev/null
-127.0.0.1 localhost.localdomain localhost
-127.0.1.1 stk1000.example.net stk1000
-
-# The following lines are desirable for IPv6 capable hosts
-::1 localhost
-::1 ip6-localhost ip6-loopback
-::1 stk1000.example.net stk1000
-fe00::0 ip6-localnet
-ff00::0 ip6-mcastprefix
-ff02::1 ip6-allnodes
-ff02::2 ip6-allrouters
-ff02::3 ip6-allhosts
+++ /dev/null
-# Local server
-10.0.0.1 stk1000.example.net
-10.0.0.1 hostmaster.example.net
-10.0.0.1 ftp.example.net
-10.0.0.1 ns.example.net
-10.0.0.1 ssh.example.net
-10.0.0.1 samba.example.net
-10.0.0.1 telnet.example.net
-10.0.0.1 www.example.net
-
-# DHCP pool
-10.0.0.20 dhcp-020.example.net
-10.0.0.21 dhcp-021.example.net
-10.0.0.22 dhcp-022.example.net
-10.0.0.23 dhcp-023.example.net
-10.0.0.24 dhcp-024.example.net
-10.0.0.25 dhcp-025.example.net
-10.0.0.26 dhcp-026.example.net
-10.0.0.27 dhcp-027.example.net
-10.0.0.28 dhcp-028.example.net
-10.0.0.29 dhcp-029.example.net
-10.0.0.30 dhcp-030.example.net
-10.0.0.31 dhcp-031.example.net
-10.0.0.32 dhcp-032.example.net
-10.0.0.33 dhcp-033.example.net
-10.0.0.34 dhcp-034.example.net
-10.0.0.35 dhcp-035.example.net
-10.0.0.36 dhcp-036.example.net
-10.0.0.37 dhcp-037.example.net
-10.0.0.38 dhcp-038.example.net
-10.0.0.39 dhcp-039.example.net
-10.0.0.40 dhcp-040.example.net
-10.0.0.41 dhcp-041.example.net
-10.0.0.42 dhcp-042.example.net
-10.0.0.43 dhcp-043.example.net
-10.0.0.44 dhcp-044.example.net
-10.0.0.45 dhcp-045.example.net
-10.0.0.46 dhcp-046.example.net
-10.0.0.47 dhcp-047.example.net
-10.0.0.48 dhcp-048.example.net
-10.0.0.49 dhcp-049.example.net
-10.0.0.50 dhcp-050.example.net
-10.0.0.51 dhcp-051.example.net
-10.0.0.52 dhcp-052.example.net
-10.0.0.53 dhcp-053.example.net
-10.0.0.54 dhcp-054.example.net
-10.0.0.55 dhcp-055.example.net
-10.0.0.56 dhcp-056.example.net
-10.0.0.57 dhcp-057.example.net
-10.0.0.58 dhcp-058.example.net
-10.0.0.59 dhcp-059.example.net
-10.0.0.60 dhcp-060.example.net
-10.0.0.61 dhcp-061.example.net
-10.0.0.62 dhcp-062.example.net
-10.0.0.63 dhcp-063.example.net
-10.0.0.64 dhcp-064.example.net
-10.0.0.65 dhcp-065.example.net
-10.0.0.66 dhcp-066.example.net
-10.0.0.67 dhcp-067.example.net
-10.0.0.68 dhcp-068.example.net
-10.0.0.69 dhcp-069.example.net
-10.0.0.70 dhcp-070.example.net
-10.0.0.71 dhcp-071.example.net
-10.0.0.72 dhcp-072.example.net
-10.0.0.73 dhcp-073.example.net
-10.0.0.74 dhcp-074.example.net
-10.0.0.75 dhcp-075.example.net
-10.0.0.76 dhcp-076.example.net
-10.0.0.77 dhcp-077.example.net
-10.0.0.78 dhcp-078.example.net
-10.0.0.79 dhcp-079.example.net
-10.0.0.80 dhcp-080.example.net
-10.0.0.81 dhcp-081.example.net
-10.0.0.82 dhcp-082.example.net
-10.0.0.83 dhcp-083.example.net
-10.0.0.84 dhcp-084.example.net
-10.0.0.85 dhcp-085.example.net
-10.0.0.86 dhcp-086.example.net
-10.0.0.87 dhcp-087.example.net
-10.0.0.88 dhcp-088.example.net
-10.0.0.89 dhcp-089.example.net
-10.0.0.90 dhcp-090.example.net
-10.0.0.91 dhcp-091.example.net
-10.0.0.92 dhcp-092.example.net
-10.0.0.93 dhcp-093.example.net
-10.0.0.94 dhcp-094.example.net
-10.0.0.95 dhcp-095.example.net
-10.0.0.96 dhcp-096.example.net
-10.0.0.97 dhcp-097.example.net
-10.0.0.98 dhcp-098.example.net
-10.0.0.99 dhcp-099.example.net
-10.0.0.100 dhcp-100.example.net
-10.0.0.101 dhcp-101.example.net
-10.0.0.102 dhcp-102.example.net
-10.0.0.103 dhcp-103.example.net
-10.0.0.104 dhcp-104.example.net
-10.0.0.105 dhcp-105.example.net
-10.0.0.106 dhcp-106.example.net
-10.0.0.107 dhcp-107.example.net
-10.0.0.108 dhcp-108.example.net
-10.0.0.109 dhcp-109.example.net
-10.0.0.110 dhcp-110.example.net
-10.0.0.111 dhcp-111.example.net
-10.0.0.112 dhcp-112.example.net
-10.0.0.113 dhcp-113.example.net
-10.0.0.114 dhcp-114.example.net
-10.0.0.115 dhcp-115.example.net
-10.0.0.116 dhcp-116.example.net
-10.0.0.117 dhcp-117.example.net
-10.0.0.118 dhcp-118.example.net
-10.0.0.119 dhcp-119.example.net
-10.0.0.120 dhcp-120.example.net
-10.0.0.121 dhcp-121.example.net
-10.0.0.122 dhcp-122.example.net
-10.0.0.123 dhcp-123.example.net
-10.0.0.124 dhcp-124.example.net
-10.0.0.125 dhcp-125.example.net
-10.0.0.126 dhcp-126.example.net
-10.0.0.127 dhcp-127.example.net
-10.0.0.128 dhcp-128.example.net
-10.0.0.129 dhcp-129.example.net
-10.0.0.130 dhcp-130.example.net
-10.0.0.131 dhcp-131.example.net
-10.0.0.132 dhcp-132.example.net
-10.0.0.133 dhcp-133.example.net
-10.0.0.134 dhcp-134.example.net
-10.0.0.135 dhcp-135.example.net
-10.0.0.136 dhcp-136.example.net
-10.0.0.137 dhcp-137.example.net
-10.0.0.138 dhcp-138.example.net
-10.0.0.139 dhcp-139.example.net
-10.0.0.140 dhcp-140.example.net
-10.0.0.141 dhcp-141.example.net
-10.0.0.142 dhcp-142.example.net
-10.0.0.143 dhcp-143.example.net
-10.0.0.144 dhcp-144.example.net
-10.0.0.145 dhcp-145.example.net
-10.0.0.146 dhcp-146.example.net
-10.0.0.147 dhcp-147.example.net
-10.0.0.148 dhcp-148.example.net
-10.0.0.149 dhcp-149.example.net
-10.0.0.150 dhcp-150.example.net
-10.0.0.151 dhcp-151.example.net
-10.0.0.152 dhcp-152.example.net
-10.0.0.153 dhcp-153.example.net
-10.0.0.154 dhcp-154.example.net
-10.0.0.155 dhcp-155.example.net
-10.0.0.156 dhcp-156.example.net
-10.0.0.157 dhcp-157.example.net
-10.0.0.158 dhcp-158.example.net
-10.0.0.159 dhcp-159.example.net
-10.0.0.160 dhcp-160.example.net
-10.0.0.161 dhcp-161.example.net
-10.0.0.162 dhcp-162.example.net
-10.0.0.163 dhcp-163.example.net
-10.0.0.164 dhcp-164.example.net
-10.0.0.165 dhcp-165.example.net
-10.0.0.166 dhcp-166.example.net
-10.0.0.167 dhcp-167.example.net
-10.0.0.168 dhcp-168.example.net
-10.0.0.169 dhcp-169.example.net
-10.0.0.170 dhcp-170.example.net
-10.0.0.171 dhcp-171.example.net
-10.0.0.172 dhcp-172.example.net
-10.0.0.173 dhcp-173.example.net
-10.0.0.174 dhcp-174.example.net
-10.0.0.175 dhcp-175.example.net
-10.0.0.176 dhcp-176.example.net
-10.0.0.177 dhcp-177.example.net
-10.0.0.178 dhcp-178.example.net
-10.0.0.179 dhcp-179.example.net
-10.0.0.180 dhcp-180.example.net
-10.0.0.181 dhcp-181.example.net
-10.0.0.182 dhcp-182.example.net
-10.0.0.183 dhcp-183.example.net
-10.0.0.184 dhcp-184.example.net
-10.0.0.185 dhcp-185.example.net
-10.0.0.186 dhcp-186.example.net
-10.0.0.187 dhcp-187.example.net
-10.0.0.188 dhcp-188.example.net
-10.0.0.189 dhcp-189.example.net
-10.0.0.190 dhcp-190.example.net
-10.0.0.191 dhcp-191.example.net
-10.0.0.192 dhcp-192.example.net
-10.0.0.193 dhcp-193.example.net
-10.0.0.194 dhcp-194.example.net
-10.0.0.195 dhcp-195.example.net
-10.0.0.196 dhcp-196.example.net
-10.0.0.197 dhcp-197.example.net
-10.0.0.198 dhcp-198.example.net
-10.0.0.199 dhcp-199.example.net
-10.0.0.200 dhcp-200.example.net
-10.0.0.201 dhcp-201.example.net
-10.0.0.202 dhcp-202.example.net
-10.0.0.203 dhcp-203.example.net
-10.0.0.204 dhcp-204.example.net
-10.0.0.205 dhcp-205.example.net
-10.0.0.206 dhcp-206.example.net
-10.0.0.207 dhcp-207.example.net
-10.0.0.208 dhcp-208.example.net
-10.0.0.209 dhcp-209.example.net
-10.0.0.210 dhcp-210.example.net
-10.0.0.211 dhcp-211.example.net
-10.0.0.212 dhcp-212.example.net
-10.0.0.213 dhcp-213.example.net
-10.0.0.214 dhcp-214.example.net
-10.0.0.215 dhcp-215.example.net
-10.0.0.216 dhcp-216.example.net
-10.0.0.217 dhcp-217.example.net
-10.0.0.218 dhcp-218.example.net
-10.0.0.219 dhcp-219.example.net
-10.0.0.220 dhcp-220.example.net
-10.0.0.221 dhcp-221.example.net
-10.0.0.222 dhcp-222.example.net
-10.0.0.223 dhcp-223.example.net
-10.0.0.224 dhcp-224.example.net
-10.0.0.225 dhcp-225.example.net
-10.0.0.226 dhcp-226.example.net
-10.0.0.227 dhcp-227.example.net
-10.0.0.228 dhcp-228.example.net
-10.0.0.229 dhcp-229.example.net
-10.0.0.230 dhcp-230.example.net
-10.0.0.231 dhcp-231.example.net
-10.0.0.232 dhcp-232.example.net
-10.0.0.233 dhcp-233.example.net
-10.0.0.234 dhcp-234.example.net
-10.0.0.235 dhcp-235.example.net
-10.0.0.236 dhcp-236.example.net
-10.0.0.237 dhcp-237.example.net
-10.0.0.238 dhcp-238.example.net
-10.0.0.239 dhcp-239.example.net
-10.0.0.240 dhcp-240.example.net
-10.0.0.241 dhcp-241.example.net
-10.0.0.242 dhcp-242.example.net
-10.0.0.243 dhcp-243.example.net
-10.0.0.244 dhcp-244.example.net
-10.0.0.245 dhcp-245.example.net
-10.0.0.246 dhcp-246.example.net
-10.0.0.247 dhcp-247.example.net
-10.0.0.248 dhcp-248.example.net
-10.0.0.249 dhcp-249.example.net
-10.0.0.250 dhcp-250.example.net
-10.0.0.251 dhcp-251.example.net
-10.0.0.252 dhcp-252.example.net
-10.0.0.253 dhcp-253.example.net
-10.0.0.254 dhcp-254.example.net
+++ /dev/null
-# Allow all trafic
-A: *
+++ /dev/null
-#netbios-ssn stream tcp nowait root.root /usr/sbin/smbd smbd
-#netbios-ns dgram udp wait root.root /usr/sbin/nmbd nmbd
-#swat stream tcp nowait.400 root.root /usr/sbin/swat swat
+++ /dev/null
-#!/bin/sh
-
-PROGRAM=/usr/sbin/alsactl
-
-# Exit silently if alsa-utils isn't installed
-[ -x ${PROGRAM} ] || exit 0
-
-echo -n "Saving mixer state: "
-if ${PROGRAM} store; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-IFDOWN=/sbin/ifdown
-
-echo -n "Stopping networking: "
-if ${IFDOWN} -a; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-MOUNT=/bin/mount
-MKDIR=/bin/mkdir
-
-retval=0
-
-mount_fs()
-{
- if [ "$1" = "" -o "$2" = "" -o "$3" = "" ]; then
- return;
- fi
-
- if [ "$4" = "" ]; then
- if ! ${MOUNT} -t $3 $1 $2; then
- echo " mount $2 failed"
- retval=1
- return 1
- else
- echo " $2 mounted"
- fi
- else
- if ! ${MOUNT} -t $3 -o $4 $1 $2; then
- echo " mount $2 failed"
- retval=1
- return 1
- else
- echo " $2 mounted"
- fi
- fi
-
- return 0
-}
-
-mkdir_fs()
-{
- if [ "$1" = "" ]; then
- return;
- fi
-
- if ! ${MKDIR} $1; then
- echo " mkdir $1 failed"
- retval=1
- return 1
- else
- echo " $1 directory made"
- fi
-
- return 0
-}
-
-echo "Mounting virtual filesystems:"
-
-mount_fs proc /proc proc
-mount_fs sys /sys sysfs
-
-if mount_fs dev /dev tmpfs "size=512k,mode=0755"; then
- mkdir_fs /dev/pts
- mount_fs pts /dev/pts devpts
- mkdir_fs /dev/shm
- # g_serial is not detected by mdev.
- mknod /dev/ttygserial c 127 0
-fi
-
-mount_fs config /config configfs
-mount_fs tmp /tmp tmpfs
-mount_fs run /var/run tmpfs
-mount_fs log /var/log tmpfs
-
-if [ $retval -ne 0 ]; then
- echo " WARNING: not able to mount all virtual file systems"
-fi
-
-exit $retval
+++ /dev/null
-#!/bin/sh
-
-echo -n "Setting up mdev: "
-set -e
-trap 'echo "failed"' EXIT
-/bin/ln -s /proc/self/fd /dev/fd
-/bin/ln -s /proc/self/fd/0 /dev/stdin
-/bin/ln -s /proc/self/fd/1 /dev/stdout
-/bin/ln -s /proc/self/fd/2 /dev/stderr
-/bin/ln -s /proc/kcore /dev/core
-/bin/echo /sbin/mdev > /proc/sys/kernel/hotplug
-/sbin/mdev -s
-trap - EXIT
-echo "done"
+++ /dev/null
-#!/bin/sh
-
-PROGRAM=/bin/hostname
-
-echo -n "Setting hostname: "
-[ -x ${PROGRAM} ] || (echo " missing"; exit 0)
-
-if [ -f /etc/hostname ]; then
- HOST="$(cat /etc/hostname)"
-else
- HOST="localhost.localdomain"
-fi
-
-start() {
- if ${PROGRAM} "${HOST}"; then
- echo "'${HOST}'"
- else
- echo "failed"
- exit 1
- fi
-}
-
-stop() {
- return 0
-}
-
-restart() {
- stop
- start
-}
-
-case "$1" in
- start)
- start
- ;;
- stop)
- stop
- ;;
- restart|reload)
- restart
- ;;
- *)
- echo $"Usage: $0 {start|stop|restart}"
- exit 1
-esac
-
-exit $?
+++ /dev/null
-#!/bin/sh
-
-FBV=/usr/bin/fbv
-FBSET=/usr/sbin/fbset
-FBMODEFILE="/etc/fb.modes"
-SPLASHFILE="/etc/stk1000bootsplash.jpg"
-
-echo -n "Bootsplash image: "
-if [ ! -x "${FBV}" -o ! -x "${FBSET}" -o \
- ! -f "${SPLASHFILE}" -o ! -f "${FBMODEFILE}" ]; then
- echo "missing"
- exit 1
-fi
-
-if ! ${FBSET} 320x240-68; then
- echo "failed"
- exit 1
-fi
-
-${FBV} ${SPLASHFILE} > /dev/null &
-if [ $? -eq 0 ]; then
- echo "loaded"
-else
- echo "failed"
-fi
+++ /dev/null
-#!/bin/sh
-
-SYSLOGD=/sbin/syslogd
-
-echo -n "Starting syslogd: "
-if [ ! -x "${SYSLOGD}" ]; then
- echo "missing"
- exit 1
-fi
-
-if ${SYSLOGD}; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
-
-echo -n "Log messages to syslog: "
-if echo 4 4 1 7 > /proc/sys/kernel/printk; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-KLOGD=/sbin/klogd
-
-echo -n "Starting klogd: "
-if [ ! -x "${KLOGD}" ]; then
- echo "missing"
- exit 1
-fi
-
-if ${KLOGD}; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-MODPROBE=/sbin/modprobe
-
-echo -n "Probing modules: "
-if [ ! -x "${MODPROBE}" -o ! -f "/etc/modules" ]; then
- echo "missing"
- exit 1
-else
- echo
-fi
-
-grep '^[^#]' "/etc/modules" | \
-while read module args; do
- [ "$module" ] || continue
- if ${MODPROBE} $module $args; then
- echo " $module loaded"
- else
- echo " $module failed"
- fi
-done
+++ /dev/null
-#!/bin/sh
-
-MOUNT=/bin/mount
-
-echo -n "Mounting local filesystems: "
-if ${MOUNT} -a; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#! /bin/sh
-
-IFUP=/sbin/ifup
-
-echo -n "Network interfaces: "
-if ${IFUP} -a; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-TELNETD=/usr/sbin/telnetd
-
-echo -n "Starting telnetd: "
-if [ ! -x "${TELNETD}" ]; then
- echo "missing"
- exit 1
-fi
-
-if ${TELNETD} -l /bin/sh; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-INETD=/usr/sbin/inetd
-
-echo -n "Starting inetd: "
-if [ ! -x "${INETD}" ]; then
- echo "missing"
- exit 1
-fi
-
-if ${INETD}; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-HTTPD=/usr/sbin/httpd
-
-echo -n "Starting httpd: "
-if [ ! -x "${HTTPD}" ]; then
- echo "missing"
- exit 1
-fi
-
-if ${HTTPD} -h /www; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-NTPDATE=/usr/bin/ntpdate
-
-if [ -f /etc/default/ntpdate ]; then
- . /etc/default/ntpdate
-else
- echo "WARNING: missing /etc/default/ntpdate"
- exit 1
-fi
-
-echo -n "Starting ntpdate: "
-if [ ! -x ${NTPDATE} ]; then
- echo "missing"
- echo -n " WARNING: could not syncronize clock, "
- echo "edit NTPSERVERS in /etc/default/ntpdate."
- exit 1
-fi
-
-if ${NTPDATE} $NTPOPTIONS $NTPSERVERS; then
- echo "done"
-else
- echo "failed"
- echo -n " WARNING: could not syncronize clock, "
- echo "edit NTPSERVERS in /etc/default/ntpdate."
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-MOUNT=/bin/mount
-
-echo -n "Mounting remote filesystems: "
-if ${MOUNT} -t nfs -a; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-PROGRAM=/usr/sbin/alsactl
-
-# Exit silently if alsa-utils isn't installed
-[ -x ${PROGRAM} ] || exit 0
-
-echo -n "Restoring mixer state: "
-if [ ! -f /etc/asound.state ]; then
- echo "missing"
- exit 1
-fi
-
-if ${PROGRAM} restore; then
- echo "done"
-else
- echo "failed"
- exit 1
-fi
+++ /dev/null
-#!/bin/sh
-
-echo -n "Get board type for GPIO: "
-if [ ! -e "/etc/release" ]; then
- echo "missing";
- exit 1
-fi
-
-BOARD=`cat /etc/release | cut -d ' ' -f1`
-
-if [ "${BOARD}" = "" ]; then
- echo "none";
-elif [ "${BOARD}" = "NGW" ]; then
- echo "'${BOARD}'"
-
- echo -n " boot LED: "
- if mkdir /config/gpio/bootled > /dev/null 2> /dev/null; then
- if ! echo 0 > /config/gpio/bootled/gpio_id; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0x10000 > /config/gpio/bootled/pin_mask; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0x10000 > /config/gpio/bootled/oe_mask; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 1 > /config/gpio/bootled/enabled; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0x10000 > /dev/gpio0; then
- echo "failed"
- exit 1
- fi
-
- echo "done"
- else
- echo "failed"
- exit 1
- fi
-
- echo -n " LED A: "
- if mkdir /config/gpio/leda > /dev/null 2> /dev/null; then
- if ! echo 0 > /config/gpio/leda/gpio_id; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0x80000 > /config/gpio/leda/pin_mask; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0x80000 > /config/gpio/leda/oe_mask; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 1 > /config/gpio/leda/enabled; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0 > /dev/gpio1; then
- echo "failed"
- exit 1
- fi
-
- echo "done"
- else
- echo "failed"
- exit 1
- fi
-
- echo -n " LED B: "
- if mkdir /config/gpio/ledb > /dev/null 2> /dev/null; then
- if ! echo 4 > /config/gpio/ledb/gpio_id; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0x80000 > /config/gpio/ledb/pin_mask; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0x80000 > /config/gpio/ledb/oe_mask; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 1 > /config/gpio/ledb/enabled; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0 > /dev/gpio2; then
- echo "failed"
- exit 1
- fi
-
- echo "done"
- else
- echo "failed"
- exit 1
- fi
-elif [ "${BOARD}" = "STK1000" ]; then # end NGW
- echo "'${BOARD}'"
-
- echo -n " switches: "
- if mkdir /config/gpio/switches > /dev/null 2> /dev/null; then
- if ! echo 1 > /config/gpio/switches/gpio_id; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 0xff > /config/gpio/switches/pin_mask; then
- echo "failed"
- exit 1
- fi
-
- if ! echo 1 > /config/gpio/switches/enabled; then
- echo "failed"
- exit 1
- fi
-
- echo "done"
- else
- echo "failed"
- exit 1
- fi
-else # end STK1000
- echo "'${BOARD}'"
- echo " WARNING: no GPIO for this board"
-fi
+++ /dev/null
-#!/bin/sh
-
-PROGRAM=/usr/bin/fbv
-SPLASHFILE="/etc/stk1000splash.jpg"
-
-echo -n "Splash image: "
-if [ ! -x "${PROGRAM}" -o ! -f "${SPLASHFILE}" ]; then
- echo "missing"
- exit 1
-fi
-
-${PROGRAM} ${SPLASHFILE} > /dev/null &
-if [ $? -eq 0 ]; then
- echo "loaded"
-else
- echo "failed"
-fi
+++ /dev/null
-#!/bin/sh
-
-echo "Shutting down ..."
-for k in /etc/init.d/K*; do
- $k stop
-done
+++ /dev/null
-#!/bin/sh
-
-for s in /etc/init.d/S*; do
- if [ -x $s ]; then
- $s start
- fi
-done
-
-echo
-echo "STK1000 ready"
-echo
+++ /dev/null
-# Inittab for the ATSTK1000 development board
-#
-# Note: BusyBox init doesn't support runlevels. The runlevels field is
-# completely ignored by BusyBox init. If you want runlevels, use sysvinit.
-#
-# Format for each entry: <id>:<runlevels>:<action>:<process>
-#
-# id == tty to run on, or empty for /dev/console
-# runlevels == ignored
-# action == one of sysinit, respawn, askfirst, wait, and once
-# process == program to run
-
-# Run the rcS script after kernel is booted.
-::sysinit:/etc/init.d/rcS
-
-# Run a shell on the first serial port. Comment out if you want a getty instead.
-ttyS0::respawn:-/bin/sh
-
-# Run a shell on the g_serial port (USB gadget device)? This shell will spawn
-# error message if the device is not connected.
-#ttygserial::respawn:-/bin/sh
-
-# Uncomment this to run a getty on the first serial port.
-#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100
-ttyS2::respawn:/sbin/getty -L ttyS2 115200 vt100
-
-# Run a script on shutdown.
-::shutdown:/etc/init.d/rcK
+++ /dev/null
-# mdev.conf for ATSTK1000
-#
-# Syntax:
-# <regexp> <UID>:<GID> <PERM> [{@,$,*} <CMD>]
-# @: run <CMD> after creating
-# $: run <CMD> before removal
-# *: like @ and $ at the same time
-# <CMD> is run inside /dev using system()
-
-full 0:0 666
-null 0:0 777
-zero 0:0 666
-
-random 0:0 444
-urandom 0:0 444
-
-console 0:5 0600
-kmem 0:9 000
-mem 0:9 0640
-ptmx 0:5 0660
-
-sda.* 0:6 0660
-sdb.* 0:6 0660
-hda.* 0:6 0660
-hdb.* 0:6 0660
-mtd.* 0:6 0660
-mmc.* 0:6 0660
-
-# Move input devices to input directory
-event.* 0:0 0660 @(mkdir -p input&&mv $MDEV input)
-mice 0:0 0660 @(mkdir -p input&&mv $MDEV input)
-mouse.* 0:0 0660 @(mkdir -p input&&mv $MDEV input)
-
-# Move sound devices to sound directory
-pcm.* 0:101 0660 @(mkdir -p snd&&mv $MDEV snd)
-seq 0:101 0660 @(mkdir -p snd&&mv $MDEV snd)
-timer 0:101 0660 @(mkdir -p snd&&mv $MDEV snd)
-control.* 0:101 0660 @(mkdir -p snd&&mv $MDEV snd)
-
-tty 0:5 0660
-tty0.* 0:5 0660
-tty1.* 0:5 0660
-tty2.* 0:5 0660
-tty3.* 0:5 0660
-tty4.* 0:5 0660
-tty5.* 0:5 0660
-tty6.* 0:5 0660
-
-ttyS.* 0:20 640
+++ /dev/null
-snd-at73c213
-snd-pcm-oss
-gpio_mouse
-mousedev
+++ /dev/null
-#
-# MPlayer configuration file
-#
-# Configuration files are read system-wide from /usr/local/etc/mplayer.conf
-# and per user from ~/.mplayer/config, where per-user settings override
-# system-wide settings, all of which are overrriden by the command line.
-#
-# The configuration file settings are the same as the command line
-# options without the preceding '-'.
-#
-# See the CONFIGURATION FILES section in the man page
-# for a detailed description of the syntax.
-
-
-##################
-# video settings #
-##################
-
-# Specify default video driver (see -vo help for a list).
-vo=fbdev2
-
-# Direct rendring, skip double buffering for framebuffer device
-dr=yes
-
-# Use SDL video with the aalib subdriver by default.
-#vo = sdl:aalib
-
-# FBdev driver:
-#
-# mode to use (read from fb.modes)
-#fbmode = 640x480-120
-#
-# location of the fb.modes file
-#fbmodeconfig = /etc/fb.modes
-
-# Specify your monitor timings for the vesa and fbdev video output drivers.
-# See /etc/X11/XF86Config for timings. Be careful; if you specify settings
-# that exceed the capabilities of your monitor, you may damage it.
-#
-# horizontal frequency range (k stands for 1000)
-#monitor-hfreq = 31.5k-50k,70k
-#
-# vertical frequency range
-#monitor-vfreq = 50-90
-#
-# dotclock (or pixelclock) range (m stands for 1000000)
-#monitor-dotclock = 30M-300M
-
-# Start in fullscreen mode by default.
-#fs=yes
-
-# Change to a different videomode when going fullscreen.
-#vm=yes
-
-# Override the autodetected color depth, may need 'vm=yes' as well.
-#bpp=0
-
-# Enable software scaling (powerful CPU needed) for video output
-# drivers that do not support hardware scaling.
-#zoom=yes
-
-# standard monitor size, with square pixels
-#monitoraspect=4:3
-
-# Use this for a widescreen monitor, non-square pixels.
-#monitoraspect=16:9
-
-# Keep the player window on top of all other windows.
-#ontop=yes
-
-
-##################
-# audio settings #
-##################
-
-# Specify default audio driver (see -ao help for a list).
-ao=oss,
-
-# Use SDL audio driver with the esd subdriver by default.
-#ao = sdl:esd
-
-# Specify the mixer device.
-#mixer = /dev/mixer
-
-# Resample the sound to 44100Hz with the lavcresample audio filter.
-#af=lavcresample=44100
-
-# Specify default audio codec (see -ac help for a list).
-ac=mad,
-
-
-##################
-# other settings #
-##################
-
-# Drop frames to preserve audio/video sync.
-#framedrop = yes
-
-# Specify your preferred skin here (skins are searched for in
-# /usr/local/share/mplayer/skins/<name> and ~/.mplayer/skins/<name>).
-#skin = Abyss
-
-# Resample the font alphamap.
-# 0 plain white fonts
-# 0.75 very narrow black outline (default)
-# 1 narrow black outline
-# 10 bold black outline
-#ffactor = 0.75
-
-# cache settings
-#
-# Use 8MB input cache by default.
-#cache = 8192
-#
-# Prefill 20% of the cache before starting playback.
-#cache-min = 20.0
-#
-# Prefill 50% of the cache before restarting playback after the cache emptied.
-#cache-seek-min = 50
-
-# DVD: Display English subtitles if available.
-#slang = en
-
-# DVD: Play English audio tracks if available.
-#alang = en
-
-
-# You can also include other configuration files.
-#include = /path/to/the/file/you/want/to/include
+++ /dev/null
-../proc/mounts
\ No newline at end of file
+++ /dev/null
-# Configure Loopback
-auto lo
-iface lo inet loopback
-
-# Configure Ethernet 0
-auto eth0
-iface eth0 inet dhcp
-
-# Configure Ethernet 1, not enabled by default
-#auto eth1
-iface eth1 inet dhcp
+++ /dev/null
-# /etc/ntp.conf, configuration for ntpd
-
-# ntpd will use syslog() if logfile is not defined
-#logfile /var/log/ntpd
-
-driftfile /var/lib/ntp/ntp.drift
-statsdir /var/log/
-
-statistics loopstats peerstats clockstats
-filegen loopstats file loopstats type day enable
-filegen peerstats file peerstats type day enable
-filegen clockstats file clockstats type day enable
-
-# You do need to talk to an NTP server or two (or three).
-#server ntp.your-provider.example
-
-# pool.ntp.org maps to more than 100 low-stratum NTP servers.
-# Your server will pick a different set every time it starts up.
-# *** Please consider joining the pool! ***
-# *** <http://www.pool.ntp.org/#join> ***
-server pool.ntp.org
-server pool.ntp.org
-
-# ... and use the local system clock as a reference if all else fails
-# NOTE: in a local network, set the local stratum of *one* stable server
-# to 10; otherwise your clocks will drift apart if you lose connectivity.
-server 127.127.1.0
-fudge 127.127.1.0 stratum 13
-
-# By default, exchange time with everybody, but don't allow configuration.
-# See /usr/share/doc/ntp-doc/html/accopt.html for details.
-restrict default kod notrap nomodify nopeer noquery
-
-# Local users may interrogate the ntp server more closely.
-restrict 127.0.0.1 nomodify
-
-# Clients from this (example!) subnet have unlimited access,
-# but only if cryptographically authenticated
-restrict 10.0.0.0 mask 255.255.255.0 notrust
-
-# If you want to provide time to your local subnet, change the next line.
-# (Again, the address is an example only.)
-broadcast 10.0.0.255
-
-# If you want to listen to time broadcasts on your local subnet,
-# de-comment the next lines. Please do this only if you trust everybody
-# on the network!
-#disable auth
-#broadcastclient
+++ /dev/null
-root:x:0:0:root:/:/bin/sh
-daemon:x:1:1:daemon:/usr/sbin:/bin/sh
-bin:x:2:2:bin:/bin:/bin/sh
-sys:x:3:3:sys:/dev:/bin/sh
-sync:x:4:100:sync:/bin:/bin/sync
-mail:x:8:8:mail:/var/spool/mail:/bin/sh
-proxy:x:13:13:proxy:/bin:/bin/sh
-www-data:x:33:33:www-data:/var/www:/bin/sh
-backup:x:34:34:backup:/var/backups:/bin/sh
-operator:x:37:37:Operator:/var:/bin/sh
-haldaemon:x:68:68:hald:/:/bin/sh
-dbus:x:81:81:dbus:/var/run/dbus:/bin/sh
-ftp:x:50:50:Anonymous FTP user:/home/ftp:/bin/ash
-dnsmasq:x:52:52:dnsmasq:/var/lib/dnsmasq:/bin/false
-sshd:x:110:65534:Operator:/var/run/sshd:/bin/false
-nobody:x:65534:65534:nobody:/nonexistent:/bin/false
-avr32:x:500:500:Linux User,,,:/home/avr32:/bin/sh
-default:x:1000:1000:Default non-root user:/home/default:/bin/sh
+++ /dev/null
-ServerName "ATSTK1002 FTP server"
-ServerType standalone
-DefaultServer on
-
-# Port 21 is the standard FTP port.
-Port 21
-
-# Umask 022 is a good standard umask to prevent new dirs and files
-# from being group and world writable.
-Umask 022
-
-# Note that this ONLY works in standalone mode, in inetd mode you should use an
-# inetd server that allows you to limit maximum number of processes per service
-# (such as inetd).
-MaxInstances 5
-
-# Set the user and group under which the server will run.
-User nobody
-Group nogroup
-
-# To cause every FTP user to be "jailed" (chrooted) into their home
-# directory, uncomment this line.
-#DefaultRoot ~
-
-# Normally, we want files to be overwriteable.
-AllowOverwrite on
-
-# Deny use of SITE CHMOD, uncomment the three lines below.
-#<Limit SITE_CHMOD>
-# DenyAll
-#</Limit>
+++ /dev/null
-# /etc/protocols:
-# $Id: protocols,v 1.3 2001/07/07 07:07:15 nalin Exp $
-#
-# Internet (IP) protocols
-#
-# from: @(#)protocols 5.1 (Berkeley) 4/17/89
-#
-# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
-#
-# See also http://www.iana.org/assignments/protocol-numbers
-
-ip 0 IP # internet protocol, pseudo protocol number
-#hopopt 0 HOPOPT # hop-by-hop options for ipv6
-icmp 1 ICMP # internet control message protocol
-igmp 2 IGMP # internet group management protocol
-ggp 3 GGP # gateway-gateway protocol
-ipencap 4 IP-ENCAP # IP encapsulated in IP (officially ``IP'')
-st 5 ST # ST datagram mode
-tcp 6 TCP # transmission control protocol
-cbt 7 CBT # CBT, Tony Ballardie <A.Ballardie@cs.ucl.ac.uk>
-egp 8 EGP # exterior gateway protocol
-igp 9 IGP # any private interior gateway (Cisco: for IGRP)
-bbn-rcc 10 BBN-RCC-MON # BBN RCC Monitoring
-nvp 11 NVP-II # Network Voice Protocol
-pup 12 PUP # PARC universal packet protocol
-argus 13 ARGUS # ARGUS
-emcon 14 EMCON # EMCON
-xnet 15 XNET # Cross Net Debugger
-chaos 16 CHAOS # Chaos
-udp 17 UDP # user datagram protocol
-mux 18 MUX # Multiplexing protocol
-dcn 19 DCN-MEAS # DCN Measurement Subsystems
-hmp 20 HMP # host monitoring protocol
-prm 21 PRM # packet radio measurement protocol
-xns-idp 22 XNS-IDP # Xerox NS IDP
-trunk-1 23 TRUNK-1 # Trunk-1
-trunk-2 24 TRUNK-2 # Trunk-2
-leaf-1 25 LEAF-1 # Leaf-1
-leaf-2 26 LEAF-2 # Leaf-2
-rdp 27 RDP # "reliable datagram" protocol
-irtp 28 IRTP # Internet Reliable Transaction Protocol
-iso-tp4 29 ISO-TP4 # ISO Transport Protocol Class 4
-netblt 30 NETBLT # Bulk Data Transfer Protocol
-mfe-nsp 31 MFE-NSP # MFE Network Services Protocol
-merit-inp 32 MERIT-INP # MERIT Internodal Protocol
-sep 33 SEP # Sequential Exchange Protocol
-3pc 34 3PC # Third Party Connect Protocol
-idpr 35 IDPR # Inter-Domain Policy Routing Protocol
-xtp 36 XTP # Xpress Tranfer Protocol
-ddp 37 DDP # Datagram Delivery Protocol
-idpr-cmtp 38 IDPR-CMTP # IDPR Control Message Transport Proto
-tp++ 39 TP++ # TP++ Transport Protocol
-il 40 IL # IL Transport Protocol
-ipv6 41 IPv6 # IPv6
-sdrp 42 SDRP # Source Demand Routing Protocol
-ipv6-route 43 IPv6-Route # Routing Header for IPv6
-ipv6-frag 44 IPv6-Frag # Fragment Header for IPv6
-idrp 45 IDRP # Inter-Domain Routing Protocol
-rsvp 46 RSVP # Resource ReSerVation Protocol
-gre 47 GRE # Generic Routing Encapsulation
-mhrp 48 MHRP # Mobile Host Routing Protocol
-bna 49 BNA # BNA
-ipv6-crypt 50 IPv6-Crypt # Encryption Header for IPv6
-ipv6-auth 51 IPv6-Auth # Authentication Header for IPv6
-i-nlsp 52 I-NLSP # Integrated Net Layer Security TUBA
-swipe 53 SWIPE # IP with Encryption
-narp 54 NARP # NBMA Address Resolution Protocol
-mobile 55 MOBILE # IP Mobility
-tlsp 56 TLSP # Transport Layer Security Protocol
-skip 57 SKIP # SKIP
-ipv6-icmp 58 IPv6-ICMP # ICMP for IPv6
-ipv6-nonxt 59 IPv6-NoNxt # No Next Header for IPv6
-ipv6-opts 60 IPv6-Opts # Destination Options for IPv6
-# 61 # any host internal protocol
-cftp 62 CFTP # CFTP
-# 63 # any local network
-sat-expak 64 SAT-EXPAK # SATNET and Backroom EXPAK
-kryptolan 65 KRYPTOLAN # Kryptolan
-rvd 66 RVD # MIT Remote Virtual Disk Protocol
-ippc 67 IPPC # Internet Pluribus Packet Core
-# 68 # any distributed file system
-sat-mon 69 SAT-MON # SATNET Monitoring
-visa 70 VISA # VISA Protocol
-ipcv 71 IPCV # Internet Packet Core Utility
-cpnx 72 CPNX # Computer Protocol Network Executive
-cphb 73 CPHB # Computer Protocol Heart Beat
-wsn 74 WSN # Wang Span Network
-pvp 75 PVP # Packet Video Protocol
-br-sat-mon 76 BR-SAT-MON # Backroom SATNET Monitoring
-sun-nd 77 SUN-ND # SUN ND PROTOCOL-Temporary
-wb-mon 78 WB-MON # WIDEBAND Monitoring
-wb-expak 79 WB-EXPAK # WIDEBAND EXPAK
-iso-ip 80 ISO-IP # ISO Internet Protocol
-vmtp 81 VMTP # Versatile Message Transport
-secure-vmtp 82 SECURE-VMTP # SECURE-VMTP
-vines 83 VINES # VINES
-ttp 84 TTP # TTP
-nsfnet-igp 85 NSFNET-IGP # NSFNET-IGP
-dgp 86 DGP # Dissimilar Gateway Protocol
-tcf 87 TCF # TCF
-eigrp 88 EIGRP # Enhanced Interior Routing Protocol (Cisco)
-ospf 89 OSPFIGP # Open Shortest Path First IGP
-sprite-rpc 90 Sprite-RPC # Sprite RPC Protocol
-larp 91 LARP # Locus Address Resolution Protocol
-mtp 92 MTP # Multicast Transport Protocol
-ax.25 93 AX.25 # AX.25 Frames
-ipip 94 IPIP # Yet Another IP encapsulation
-micp 95 MICP # Mobile Internetworking Control Pro.
-scc-sp 96 SCC-SP # Semaphore Communications Sec. Pro.
-etherip 97 ETHERIP # Ethernet-within-IP Encapsulation
-encap 98 ENCAP # Yet Another IP encapsulation
-# 99 # any private encryption scheme
-gmtp 100 GMTP # GMTP
-ifmp 101 IFMP # Ipsilon Flow Management Protocol
-pnni 102 PNNI # PNNI over IP
-pim 103 PIM # Protocol Independent Multicast
-aris 104 ARIS # ARIS
-scps 105 SCPS # SCPS
-qnx 106 QNX # QNX
-a/n 107 A/N # Active Networks
-ipcomp 108 IPComp # IP Payload Compression Protocol
-snp 109 SNP # Sitara Networks Protocol
-compaq-peer 110 Compaq-Peer # Compaq Peer Protocol
-ipx-in-ip 111 IPX-in-IP # IPX in IP
-vrrp 112 VRRP # Virtual Router Redundancy Protocol
-pgm 113 PGM # PGM Reliable Transport Protocol
-# 114 # any 0-hop protocol
-l2tp 115 L2TP # Layer Two Tunneling Protocol
-ddx 116 DDX # D-II Data Exchange
-iatp 117 IATP # Interactive Agent Transfer Protocol
-stp 118 STP # Schedule Transfer
-srp 119 SRP # SpectraLink Radio Protocol
-uti 120 UTI # UTI
-smp 121 SMP # Simple Message Protocol
-sm 122 SM # SM
-ptp 123 PTP # Performance Transparency Protocol
-isis 124 ISIS # ISIS over IPv4
-fire 125 FIRE
-crtp 126 CRTP # Combat Radio Transport Protocol
-crdup 127 CRUDP # Combat Radio User Datagram
-sscopmce 128 SSCOPMCE
-iplt 129 IPLT
-sps 130 SPS # Secure Packet Shield
-pipe 131 PIPE # Private IP Encapsulation within IP
-sctp 132 SCTP # Stream Control Transmission Protocol
-fc 133 FC # Fibre Channel
-# rsvp-e2e-ignore 134 RSVP-E2E-IGNORE
-# 134-254 # Unassigned
-# 255 # Reserved
+++ /dev/null
-../tmp/resolv.conf
\ No newline at end of file
+++ /dev/null
-# This is the main Samba configuration file. You should read the
-# smb.conf(5) manual page in order to understand the options listed
-# here. Samba has a huge number of configurable options (perhaps too
-# many!) most of which are not shown in this example
-#
-# For a step to step guide on installing, configuring and using samba,
-# read the Samba-HOWTO-Collection. This may be obtained from:
-# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
-#
-# Many working examples of smb.conf files can be found in the
-# Samba-Guide which is generated daily and can be downloaded from:
-# http://www.samba.org/samba/docs/Samba-Guide.pdf
-#
-# Any line which starts with a ; (semi-colon) or a # (hash)
-# is a comment and is ignored. In this example we will use a #
-# for commentry and a ; for parts of the config file that you
-# may wish to enable
-#
-# NOTE: Whenever you modify this file you should run the command "testparm"
-# to check that you have not made any basic syntactic errors.
-#
-#======================= Global Settings =====================================
-[global]
-
-# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
- workgroup = AVR32
-
-# Network name
- netbios name = stk1000
-
-# server string is the equivalent of the NT Description field
- server string = AVR32 STK1000 development kit
-
-# Security mode. Defines in which mode Samba will operate. Possible
-# values are share, user, server, domain and ads. Most people will want
-# user level security. See the Samba-HOWTO-Collection for details.
- security = user
-
-# This option is important for security. It allows you to restrict
-# connections to machines which are on your local network. The
-# following example restricts access to two C class networks and
-# the "loopback" interface. For more examples of the syntax see
-# the smb.conf man page
- hosts allow = 10.0.0. 127.
-
-# If you want to automatically load your printer list rather
-# than setting them up individually then you'll need this
- load printers = no
-
-# you may wish to override the location of the printcap file
-; printcap name = /etc/printcap
-
-# on SystemV system setting printcap name to lpstat should allow
-# you to automatically obtain a printer list from the SystemV spool
-# system
-; printcap name = lpstat
-
-# It should not be necessary to specify the print system type unless
-# it is non-standard. Currently supported print systems include:
-# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
-; printing = cups
-
-# Uncomment this if you want a guest account, you must add this to /etc/passwd
-# otherwise the user "nobody" is used
-; guest account = pcguest
-
-# this tells Samba to use a separate log file for each machine
-# that connects
- log file = /var/log/samba/log.%m
- debug level = 1
- syslog = 0
-
-# Put a capping on the size of the log files (in Kb).
- max log size = 1000
-
-# Use password server option only with security = server
-# The argument list may include:
-# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
-# or to auto-locate the domain controller/s
-# password server = *
-; password server = <NT-Server-Name>
-
-# Use the realm option only with security = ads
-# Specifies the Active Directory realm the host is part of
-; realm = MY_REALM
-
-# Backend to store user information in. New installations should
-# use either tdbsam or ldapsam. smbpasswd is available for backwards
-# compatibility. tdbsam requires no further configuration.
- passdb backend = smbpasswd:/etc/samba/smbpasswd
-
-# Using the following line enables you to customise your configuration
-# on a per machine basis. The %m gets replaced with the netbios name
-# of the machine that is connecting.
-# Note: Consider carefully the location in the configuration file of
-# this line. The included file is read at that point.
-; include = /usr/local/samba/lib/smb.conf.%m
-
-# Configure Samba to use multiple interfaces
-# If you have multiple network interfaces then you must list them
-# here. See the man page for details.
- interfaces = lo eth0
-
- socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
-
-# Browser Control Options:
-# set local master to no if you don't want Samba to become a master
-# browser on your network. Otherwise the normal election rules apply
- local master = yes
-
-# OS Level determines the precedence of this server in master browser
-# elections. The default value should be reasonable
- os level = 254
-
-# Domain Master specifies Samba to be the Domain Master Browser. This
-# allows Samba to collate browse lists between subnets. Don't use this
-# if you already have a Windows NT domain controller doing this job
- domain master = yes
-
-# Preferred Master causes Samba to force a local browser election on startup
-# and gives it a slightly higher chance of winning the election
- preferred master = yes
-
-# Enable this if you want Samba to be a domain logon server for
-# Windows95 workstations.
-; domain logons = yes
-
-# if you enable domain logons then you may want a per-machine or
-# per user logon script
-# run a specific logon batch file per workstation (machine)
-; logon script = %m.bat
-# run a specific logon batch file per username
-; logon script = %U.bat
-
-# Where to store roving profiles (only for Win95 and WinNT)
-# %L substitutes for this servers netbios name, %U is username
-# You must uncomment the [Profiles] share below
-; logon path = \\%L\Profiles\%U
-
-# Windows Internet Name Serving Support Section:
-# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
-; wins support = yes
-
-# WINS Server - Tells the NMBD components of Samba to be a WINS Client
-# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
-; wins server = w.x.y.z
-
-# WINS Proxy - Tells Samba to answer name resolution queries on
-# behalf of a non WINS capable client, for this to work there must be
-# at least one WINS Server on the network. The default is NO.
-; wins proxy = yes
-
-# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
-# via DNS nslookups. The default is NO.
- dns proxy = no
-
-# These scripts are used on a domain controller or stand-alone
-# machine to add or delete corresponding unix accounts
-; add user script = /usr/sbin/useradd %u
-; add group script = /usr/sbin/groupadd %g
-; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
-; delete user script = /usr/sbin/userdel %u
-; delete user from group script = /usr/sbin/deluser %u %g
-; delete group script = /usr/sbin/groupdel %g
-
-# Unix charset on the filesystem
- unix charset = iso8859-1
-
-# Code page for the client
-# client code page = 850
-
-#============================ Share Definitions ==============================
-[homes]
- comment = Home Directories
- browseable = no
- writable = yes
-
-[netdisk]
- comment = Network share on STK1000
- path = /media
- read only = no
- public = yes
-
-# Un-comment the following and create the netlogon directory for Domain Logons
-; [netlogon]
-; comment = Network Logon Service
-; path = /usr/local/samba/lib/netlogon
-; guest ok = yes
-; writable = no
-; share modes = no
-
-
-# Un-comment the following to provide a specific roving profile share
-# the default is to use the user's home directory
-;[Profiles]
-; path = /usr/local/samba/profiles
-; browseable = no
-; guest ok = yes
-
-
-# NOTE: If you have a BSD-style print system there is no need to
-# specifically define each individual printer
-;[printers]
-; comment = All Printers
-; path = /usr/spool/samba
-; browseable = no
-# Set public = yes to allow user 'guest account' to print
-; guest ok = no
-; writable = no
-; printable = yes
-
-# This one is useful for people to share files
-;[tmp]
-; comment = Temporary file space
-; path = /tmp
-; read only = no
-; public = yes
-
-# A publicly accessible directory, but read only, except for people in
-# the "staff" group
-;[public]
-; comment = Public Stuff
-; path = /home/samba
-; public = yes
-; writable = yes
-; printable = no
-; write list = @staff
-
-# Other examples.
-#
-# A private printer, usable only by fred. Spool data will be placed in fred's
-# home directory. Note that fred must have write access to the spool directory,
-# wherever it is.
-;[fredsprn]
-; comment = Fred's Printer
-; valid users = fred
-; path = /homes/fred
-; printer = freds_printer
-; public = no
-; writable = no
-; printable = yes
-
-# A private directory, usable only by fred. Note that fred requires write
-# access to the directory.
-;[fredsdir]
-; comment = Fred's Service
-; path = /usr/somewhere/private
-; valid users = fred
-; public = no
-; writable = yes
-; printable = no
-
-# a service which has a different directory for each machine that connects
-# this allows you to tailor configurations to incoming machines. You could
-# also use the %U option to tailor it by user name.
-# The %m gets replaced with the machine name that is connecting.
-;[pchome]
-; comment = PC Directories
-; path = /usr/pc/%m
-; public = no
-; writable = yes
-
-# A publicly accessible directory, read/write to all users. Note that all files
-# created in the directory by users will be owned by the default user, so
-# any user with access can delete any other user's files. Obviously this
-# directory must be writable by the default user. Another user could of course
-# be specified, in which case all files would be owned by that user instead.
-;[public]
-; path = /usr/somewhere/else/public
-; public = yes
-; only guest = yes
-; writable = yes
-; printable = no
-
-# The following two entries demonstrate how to share a directory so that two
-# users can place files there that will be owned by the specific users. In this
-# setup, the directory should be writable by both users and should have the
-# sticky bit set on it to prevent abuse. Obviously this could be extended to
-# as many users as required.
-;[myshare]
-; comment = Mary's and Fred's stuff
-; path = /usr/somewhere/shared
-; valid users = mary fred
-; public = no
-; writable = yes
-; printable = no
-; create mask = 0765
+++ /dev/null
-root:0:172DC9BBE870E1B6AAD3B435B51404EE:090A846DE05FDBC2D90864D49620FD7C:[U ]:LCT-4561C217:
+++ /dev/null
-#
-# Network services, Internet style
-#
-# Note that it is presently the policy of IANA to assign a single well-known
-# port number for both TCP and UDP; hence, most entries here have two entries
-# even if the protocol doesn't support UDP operations.
-#
-# The latest IANA port assignments can be gotten from
-#
-# http://www.iana.org/assignments/port-numbers
-#
-# The Well Known Ports are those from 0 through 1023.
-# The Registered Ports are those from 1024 through 49151
-# The Dynamic and/or Private Ports are those from 49152 through 65535
-#
-# Kerberos services are for Kerberos v4, and are unofficial. Sites running
-# v5 should uncomment v5 entries and comment v4 entries.
-#
-# $FreeBSD: src/etc/services,v 1.102.8.1 2006/01/29 11:32:48 maxim Exp $
-# From: @(#)services 5.8 (Berkeley) 5/9/91
-#
-# WELL KNOWN PORT NUMBERS
-#
-rtmp 1/ddp #Routing Table Maintenance Protocol
-tcpmux 1/tcp #TCP Port Service Multiplexer
-tcpmux 1/udp #TCP Port Service Multiplexer
-nbp 2/ddp #Name Binding Protocol
-compressnet 2/tcp #Management Utility
-compressnet 2/udp #Management Utility
-compressnet 3/tcp #Compression Process
-compressnet 3/udp #Compression Process
-echo 4/ddp #AppleTalk Echo Protocol
-rje 5/tcp #Remote Job Entry
-rje 5/udp #Remote Job Entry
-zip 6/ddp #Zone Information Protocol
-echo 7/tcp
-echo 7/udp
-discard 9/tcp sink null
-discard 9/udp sink null
-systat 11/tcp users #Active Users
-systat 11/udp users #Active Users
-daytime 13/tcp
-daytime 13/udp
-qotd 17/tcp quote #Quote of the Day
-qotd 17/udp quote #Quote of the Day
-msp 18/tcp #Message Send Protocol
-msp 18/udp #Message Send Protocol
-chargen 19/tcp ttytst source #Character Generator
-chargen 19/udp ttytst source #Character Generator
-ftp-data 20/tcp #File Transfer [Default Data]
-ftp-data 20/udp #File Transfer [Default Data]
-ftp 21/tcp #File Transfer [Control]
-ftp 21/udp #File Transfer [Control]
-ssh 22/tcp #Secure Shell Login
-ssh 22/udp #Secure Shell Login
-telnet 23/tcp
-telnet 23/udp
-# 24/tcp any private mail system
-# 24/udp any private mail system
-smtp 25/tcp mail #Simple Mail Transfer
-smtp 25/udp mail #Simple Mail Transfer
-nsw-fe 27/tcp #NSW User System FE
-nsw-fe 27/udp #NSW User System FE
-msg-icp 29/tcp #MSG ICP
-msg-icp 29/udp #MSG ICP
-msg-auth 31/tcp #MSG Authentication
-msg-auth 31/udp #MSG Authentication
-dsp 33/tcp #Display Support Protocol
-dsp 33/udp #Display Support Protocol
-# 35/tcp any private printer server
-# 35/udp any private printer server
-time 37/tcp timserver
-time 37/udp timserver
-rap 38/tcp #Route Access Protocol
-rap 38/udp #Route Access Protocol
-rlp 39/tcp resource #Resource Location Protocol
-rlp 39/udp resource #Resource Location Protocol
-graphics 41/tcp
-graphics 41/udp
-nameserver 42/tcp name #Host Name Server
-nameserver 42/udp name #Host Name Server
-nicname 43/tcp whois
-nicname 43/udp whois
-mpm-flags 44/tcp #MPM FLAGS Protocol
-mpm-flags 44/udp #MPM FLAGS Protocol
-mpm 45/tcp #Message Processing Module [recv]
-mpm 45/udp #Message Processing Module [recv]
-mpm-snd 46/tcp #MPM [default send]
-mpm-snd 46/udp #MPM [default send]
-ni-ftp 47/tcp #NI FTP
-ni-ftp 47/udp #NI FTP
-auditd 48/tcp #Digital Audit Daemon
-auditd 48/udp #Digital Audit Daemon
-tacacs 49/tcp #Login Host Protocol (TACACS)
-tacacs 49/udp #Login Host Protocol (TACACS)
-re-mail-ck 50/tcp #Remote Mail Checking Protocol
-re-mail-ck 50/udp #Remote Mail Checking Protocol
-la-maint 51/tcp #IMP Logical Address Maintenance
-la-maint 51/udp #IMP Logical Address Maintenance
-xns-time 52/tcp #XNS Time Protocol
-xns-time 52/udp #XNS Time Protocol
-domain 53/tcp #Domain Name Server
-domain 53/udp #Domain Name Server
-xns-ch 54/tcp #XNS Clearinghouse
-xns-ch 54/udp #XNS Clearinghouse
-isi-gl 55/tcp #ISI Graphics Language
-isi-gl 55/udp #ISI Graphics Language
-xns-auth 56/tcp #XNS Authentication
-xns-auth 56/udp #XNS Authentication
-mtp 57/tcp # deprecated
-#PROBLEMS!==============================================================
-# 57/tcp any private terminal access
-#PROBLEMS!==============================================================
-# 57/udp any private terminal access
-xns-mail 58/tcp #XNS Mail
-xns-mail 58/udp #XNS Mail
-# 59/tcp any private file service
-# 59/udp any private file service
-ni-mail 61/tcp #NI MAIL
-ni-mail 61/udp #NI MAIL
-acas 62/tcp #ACA Services
-acas 62/udp #ACA Services
-whois++ 63/tcp
-whois++ 63/udp
-covia 64/tcp #Communications Integrator (CI)
-covia 64/udp #Communications Integrator (CI)
-tacacs-ds 65/tcp #TACACS-Database Service
-tacacs-ds 65/udp #TACACS-Database Service
-sql*net 66/tcp #Oracle SQL*NET
-sql*net 66/udp #Oracle SQL*NET
-bootps 67/tcp dhcps #Bootstrap Protocol Server
-bootps 67/udp dhcps #Bootstrap Protocol Server
-bootpc 68/tcp dhcpc #Bootstrap Protocol Client
-bootpc 68/udp dhcpc #Bootstrap Protocol Client
-tftp 69/tcp #Trivial File Transfer
-tftp 69/udp #Trivial File Transfer
-gopher 70/tcp
-gopher 70/udp
-netrjs-1 71/tcp #Remote Job Service
-netrjs-1 71/udp #Remote Job Service
-netrjs-2 72/tcp #Remote Job Service
-netrjs-2 72/udp #Remote Job Service
-netrjs-3 73/tcp #Remote Job Service
-netrjs-3 73/udp #Remote Job Service
-netrjs-4 74/tcp #Remote Job Service
-netrjs-4 74/udp #Remote Job Service
-# 75/tcp any private dial out service
-# 75/udp any private dial out service
-deos 76/tcp #Distributed External Object Store
-deos 76/udp #Distributed External Object Store
-netrjs 77/tcp
-#PROBLEMS!==============================================================
-# 77/tcp any private RJE service
-#PROBLEMS!==============================================================
-# 77/udp any private RJE service
-vettcp 78/tcp
-vettcp 78/udp
-finger 79/tcp
-finger 79/udp
-http 80/tcp www www-http #World Wide Web HTTP
-http 80/udp www www-http #World Wide Web HTTP
-hosts2-ns 81/tcp #HOSTS2 Name Server
-hosts2-ns 81/udp #HOSTS2 Name Server
-xfer 82/tcp #XFER Utility
-xfer 82/udp #XFER Utility
-mit-ml-dev 83/tcp #MIT ML Device
-mit-ml-dev 83/udp #MIT ML Device
-ctf 84/tcp #Common Trace Facility
-ctf 84/udp #Common Trace Facility
-mit-ml-dev 85/tcp #MIT ML Device
-mit-ml-dev 85/udp #MIT ML Device
-mfcobol 86/tcp #Micro Focus Cobol
-mfcobol 86/udp #Micro Focus Cobol
-ttylink 87/tcp
-#PROBLEMS!===========================================================
-# 87/tcp any private terminal link
-#PROBLEMS!===========================================================
-# 87/udp any private terminal link
-kerberos-sec 88/tcp kerberos # krb5 # Kerberos (v5)
-kerberos-sec 88/udp kerberos # krb5 # Kerberos (v5)
-su-mit-tg 89/tcp #SU/MIT Telnet Gateway
-su-mit-tg 89/udp #SU/MIT Telnet Gateway
-dnsix 90/tcp #DNSIX Securit Attribute Token Map
-dnsix 90/udp #DNSIX Securit Attribute Token Map
-mit-dov 91/tcp #MIT Dover Spooler
-mit-dov 91/udp #MIT Dover Spooler
-npp 92/tcp #Network Printing Protocol
-npp 92/udp #Network Printing Protocol
-dcp 93/tcp #Device Control Protocol
-dcp 93/udp #Device Control Protocol
-objcall 94/tcp #Tivoli Object Dispatcher
-objcall 94/udp #Tivoli Object Dispatcher
-supdup 95/tcp
-supdup 95/udp
-dixie 96/tcp #DIXIE Protocol Specification
-dixie 96/udp #DIXIE Protocol Specification
-swift-rvf 97/tcp #Swift Remote Virtural File Protocol
-swift-rvf 97/udp #Swift Remote Virtural File Protocol
-tacnews 98/tcp #TAC News, Unofficial: Red Hat linuxconf
-tacnews 98/udp #TAC News, Unofficial: Red Hat linuxconf
-metagram 99/tcp #Metagram Relay
-metagram 99/udp #Metagram Relay
-newacct 100/tcp #[unauthorized use]
-hostname 101/tcp hostnames #NIC Host Name Server
-hostname 101/udp hostnames #NIC Host Name Server
-iso-tsap 102/tcp tsap #ISO-TSAP Class 0
-iso-tsap 102/udp tsap #ISO-TSAP Class 0
-gppitnp 103/tcp #Genesis Point-to-Point Trans Net
-gppitnp 103/udp #Genesis Point-to-Point Trans Net
-acr-nema 104/tcp #ACR-NEMA Digital Imag. & Comm. 300
-acr-nema 104/udp #ACR-NEMA Digital Imag. & Comm. 300
-csnet-ns 105/tcp cso-ns cso #Mailbox Name Nameserver
-csnet-ns 105/udp cso-ns cso #Mailbox Name Nameserver
-pop3pw 106/tcp 3com-tsmux #Eudora compatible PW changer
-3com-tsmux 106/udp
-rtelnet 107/tcp #Remote Telnet Service
-rtelnet 107/udp #Remote Telnet Service
-snagas 108/tcp #SNA Gateway Access Server
-snagas 108/udp #SNA Gateway Access Server
-pop2 109/tcp postoffice #Post Office Protocol - Version 2
-pop2 109/udp postoffice #Post Office Protocol - Version 2
-pop3 110/tcp #Post Office Protocol - Version 3
-pop3 110/udp #Post Office Protocol - Version 3
-sunrpc 111/tcp rpcbind #SUN Remote Procedure Call
-sunrpc 111/udp rpcbind #SUN Remote Procedure Call
-mcidas 112/tcp #McIDAS Data Transmission Protocol
-mcidas 112/udp #McIDAS Data Transmission Protocol
-auth 113/tcp ident tap #Authentication Service
-auth 113/udp ident tap #Authentication Service
-audionews 114/tcp #Audio News Multicast
-audionews 114/udp #Audio News Multicast
-sftp 115/tcp #Simple File Transfer Protocol
-sftp 115/udp #Simple File Transfer Protocol
-ansanotify 116/tcp #ANSA REX Notify
-ansanotify 116/udp #ANSA REX Notify
-uucp-path 117/tcp #UUCP Path Service
-uucp-path 117/udp #UUCP Path Service
-sqlserv 118/tcp #SQL Services
-sqlserv 118/udp #SQL Services
-nntp 119/tcp usenet #Network News Transfer Protocol
-nntp 119/udp usenet #Network News Transfer Protocol
-cfdptkt 120/tcp
-cfdptkt 120/udp
-erpc 121/tcp #Encore Expedited Remote Pro.Call
-erpc 121/udp #Encore Expedited Remote Pro.Call
-smakynet 122/tcp
-smakynet 122/udp
-ntp 123/tcp #Network Time Protocol
-ntp 123/udp #Network Time Protocol
-ansatrader 124/tcp #ANSA REX Trader
-ansatrader 124/udp #ANSA REX Trader
-locus-map 125/tcp #Locus PC-Interface Net Map Ser
-locus-map 125/udp #Locus PC-Interface Net Map Ser
-unitary 126/tcp #Unisys Unitary Login
-unitary 126/udp #Unisys Unitary Login
-locus-con 127/tcp #Locus PC-Interface Conn Server
-locus-con 127/udp #Locus PC-Interface Conn Server
-gss-xlicen 128/tcp #GSS X License Verification
-gss-xlicen 128/udp #GSS X License Verification
-pwdgen 129/tcp #Password Generator Protocol
-pwdgen 129/udp #Password Generator Protocol
-cisco-fna 130/tcp #cisco FNATIVE
-cisco-fna 130/udp #cisco FNATIVE
-cisco-tna 131/tcp #cisco TNATIVE
-cisco-tna 131/udp #cisco TNATIVE
-cisco-sys 132/tcp #cisco SYSMAINT
-cisco-sys 132/udp #cisco SYSMAINT
-statsrv 133/tcp #Statistics Service
-statsrv 133/udp #Statistics Service
-ingres-net 134/tcp #INGRES-NET Service
-ingres-net 134/udp #INGRES-NET Service
-loc-srv 135/tcp epmap #Location Service
-loc-srv 135/udp epmap #Location Service
-profile 136/tcp #PROFILE Naming System
-profile 136/udp #PROFILE Naming System
-netbios-ns 137/tcp #NETBIOS Name Service
-netbios-ns 137/udp #NETBIOS Name Service
-netbios-dgm 138/tcp #NETBIOS Datagram Service
-netbios-dgm 138/udp #NETBIOS Datagram Service
-netbios-ssn 139/tcp #NETBIOS Session Service
-netbios-ssn 139/udp #NETBIOS Session Service
-emfis-data 140/tcp #EMFIS Data Service
-emfis-data 140/udp #EMFIS Data Service
-emfis-cntl 141/tcp #EMFIS Control Service
-emfis-cntl 141/udp #EMFIS Control Service
-bl-idm 142/tcp #Britton-Lee IDM
-bl-idm 142/udp #Britton-Lee IDM
-imap 143/tcp imap2 imap4 #Interim Mail Access Protocol v2
-imap 143/udp imap2 imap4 #Interim Mail Access Protocol v2
-NeWS 144/tcp # Window System
-NeWS 144/udp # Window System
-#PROBLEMS!==============================================================
-#uma 144/tcp #Universal Management Architecture
-#uma 144/udp #Universal Management Architecture
-#PROBLEMS!==============================================================
-uaac 145/tcp #UAAC Protocol
-uaac 145/udp #UAAC Protocol
-iso-tp0 146/tcp
-iso-tp0 146/udp
-iso-ip 147/tcp
-iso-ip 147/udp
-cronus 148/tcp jargon #CRONUS-SUPPORT
-cronus 148/udp jargon #CRONUS-SUPPORT
-aed-512 149/tcp #AED 512 Emulation Service
-aed-512 149/udp #AED 512 Emulation Service
-sql-net 150/tcp
-sql-net 150/udp
-hems 151/tcp
-hems 151/udp
-bftp 152/tcp #Background File Transfer Program
-bftp 152/udp #Background File Transfer Program
-sgmp 153/tcp
-sgmp 153/udp
-netsc-prod 154/tcp
-netsc-prod 154/udp
-netsc-dev 155/tcp
-netsc-dev 155/udp
-sqlsrv 156/tcp #SQL Service
-sqlsrv 156/udp #SQL Service
-knet-cmp 157/tcp #KNET/VM Command/Message Protocol
-knet-cmp 157/udp #KNET/VM Command/Message Protocol
-pcmail-srv 158/tcp #PCMail Server
-pcmail-srv 158/udp #PCMail Server
-nss-routing 159/tcp
-nss-routing 159/udp
-sgmp-traps 160/tcp
-sgmp-traps 160/udp
-snmp 161/tcp
-snmp 161/udp
-snmptrap 162/tcp snmp-trap
-snmptrap 162/udp snmp-trap
-cmip-man 163/tcp #CMIP/TCP Manager
-cmip-man 163/udp #CMIP/TCP Manager
-cmip-agent 164/tcp #CMIP/TCP Agent
-smip-agent 164/udp #CMIP/TCP Agent
-xns-courier 165/tcp #Xerox
-xns-courier 165/udp #Xerox
-s-net 166/tcp #Sirius Systems
-s-net 166/udp #Sirius Systems
-namp 167/tcp
-namp 167/udp
-rsvd 168/tcp
-rsvd 168/udp
-send 169/tcp
-send 169/udp
-print-srv 170/tcp #Network PostScript
-print-srv 170/udp #Network PostScript
-multiplex 171/tcp #Network Innovations Multiplex
-multiplex 171/udp #Network Innovations Multiplex
-cl/1 172/tcp #Network Innovations CL/1
-cl/1 172/udp #Network Innovations CL/1
-xyplex-mux 173/tcp
-xyplex-mux 173/udp
-mailq 174/tcp
-mailq 174/udp
-vmnet 175/tcp
-vmnet 175/udp
-genrad-mux 176/tcp
-genrad-mux 176/udp
-xdmcp 177/tcp #X Display Manager Control Protocol
-xdmcp 177/udp #X Display Manager Control Protocol
-NextStep 178/tcp nextstep NeXTStep #NextStep Window Server
-NextStep 178/udp nextstep NeXTStep #NextStep Window Server
-bgp 179/tcp #Border Gateway Protocol
-bgp 179/udp #Border Gateway Protocol
-ris 180/tcp #Intergraph
-ris 180/udp #Intergraph
-unify 181/tcp
-unify 181/udp
-audit 182/tcp #Unisys Audit SITP
-audit 182/udp #Unisys Audit SITP
-ocbinder 183/tcp
-ocbinder 183/udp
-ocserver 184/tcp
-ocserver 184/udp
-remote-kis 185/tcp
-remote-kis 185/udp
-kis 186/tcp #KIS Protocol
-kis 186/udp #KIS Protocol
-aci 187/tcp #Application Communication Interface
-aci 187/udp #Application Communication Interface
-mumps 188/tcp #Plus Five's MUMPS
-mumps 188/udp #Plus Five's MUMPS
-qft 189/tcp #Queued File Transport
-qft 189/udp #Queued File Transport
-gacp 190/tcp #Gateway Access Control Protocol
-gacp 190/udp cacp #Gateway Access Control Protocol
-prospero 191/tcp #Prospero Directory Service
-prospero 191/udp #Prospero Directory Service
-osu-nms 192/tcp #OSU Network Monitoring System
-osu-nms 192/udp #OSU Network Monitoring System
-srmp 193/tcp #Spider Remote Monitoring Protocol
-srmp 193/udp #Spider Remote Monitoring Protocol
-irc 194/tcp #Internet Relay Chat Protocol
-irc 194/udp #Internet Relay Chat Protocol
-dn6-nlm-aud 195/tcp #DNSIX Network Level Module Audit
-dn6-nlm-aud 195/udp #DNSIX Network Level Module Audit
-dn6-smm-red 196/tcp #DNSIX Session Mgt Module Audit Redir
-dn6-smm-red 196/udp #DNSIX Session Mgt Module Audit Redir
-dls 197/tcp #Directory Location Service
-dls 197/udp #Directory Location Service
-dls-mon 198/tcp #Directory Location Service Monitor
-dls-mon 198/udp #Directory Location Service Monitor
-smux 199/tcp
-smux 199/udp
-src 200/tcp #IBM System Resource Controller
-src 200/udp #IBM System Resource Controller
-at-rtmp 201/tcp #AppleTalk Routing Maintenance
-at-rtmp 201/udp #AppleTalk Routing Maintenance
-at-nbp 202/tcp #AppleTalk Name Binding
-at-nbp 202/udp #AppleTalk Name Binding
-at-3 203/tcp #AppleTalk Unused
-at-3 203/udp #AppleTalk Unused
-at-echo 204/tcp #AppleTalk Echo
-at-echo 204/udp #AppleTalk Echo
-at-5 205/tcp #AppleTalk Unused
-at-5 205/udp #AppleTalk Unused
-at-zis 206/tcp #AppleTalk Zone Information
-at-zis 206/udp #AppleTalk Zone Information
-at-7 207/tcp #AppleTalk Unused
-at-7 207/udp #AppleTalk Unused
-at-8 208/tcp #AppleTalk Unused
-at-8 208/udp #AppleTalk Unused
-qmtp 209/tcp #The Quick Mail Transfer Protocol
-qmtp 209/udp #The Quick Mail Transfer Protocol
-#PROBLEMS!==============================================================
-#tam 209/tcp #Trivial Authenticated Mail Protocol
-#tam 209/udp #Trivial Authenticated Mail Protocol
-#PROBLEMS!==============================================================
-z39.50 210/tcp wais #ANSI Z39.50
-z39.50 210/udp wais #ANSI Z39.50
-914c/g 211/tcp #Texas Instruments 914C/G Terminal
-914c/g 211/udp #Texas Instruments 914C/G Terminal
-anet 212/tcp #ATEXSSTR
-anet 212/udp #ATEXSSTR
-ipx 213/tcp
-ipx 213/udp
-vmpwscs 214/tcp
-vmpwscs 214/udp
-softpc 215/tcp #Insignia Solutions
-softpc 215/udp #Insignia Solutions
-CAIlic 216/tcp atls #Computer Associates Int'l License Server
-CAIlic 216/udp atls #Computer Associates Int'l License Server
-dbase 217/tcp #dBASE Unix
-dbase 217/udp #dBASE Unix
-mpp 218/tcp #Netix Message Posting Protocol
-mpp 218/udp #Netix Message Posting Protocol
-uarps 219/tcp #Unisys ARPs
-uarps 219/udp #Unisys ARPs
-#imap3@220 was never used and never should have been allocated. See PR 46294.
-#imap3 220/tcp #Interactive Mail Access Protocol v3
-#imap3 220/udp #Interactive Mail Access Protocol v3
-fln-spx 221/tcp #Berkeley rlogind with SPX auth
-fln-spx 221/udp #Berkeley rlogind with SPX auth
-rsh-spx 222/tcp #Berkeley rshd with SPX auth
-rsh-spx 222/udp #Berkeley rshd with SPX auth
-cdc 223/tcp #Certificate Distribution Center
-cdc 223/udp #Certificate Distribution Center
-direct 242/tcp
-direct 242/udp
-sur-meas 243/tcp #Survey Measurement
-sur-meas 243/udp #Survey Measurement
-dayna 244/tcp
-dayna 244/udp
-link 245/tcp
-link 245/udp
-dsp3270 246/tcp #Display Systems Protocol
-dsp3270 246/udp #Display Systems Protocol
-subntbcst_tftp 247/tcp #subntbcst_tftp
-subntbcst_tftp 247/udp #subntbcst_tftp
-bhfhs 248/tcp
-bhfhs 248/udp
-# 249-255 reserved
-rap 256/tcp
-rap 256/udp
-set 257/tcp #secure electronic transaction
-set 257/udp #secure electronic transaction
-yak-chat 258/tcp #yak winsock personal chat
-yak-chat 258/udp #yak winsock personal chat
-esro-gen 259/tcp #efficient short remote operations
-esro-gen 259/udp #efficient short remote operations
-openport 260/tcp
-openport 260/udp
-nsiiops 261/tcp #iiop name service over tls/ssl
-nsiiops 261/udp #iiop name service over tls/ssl
-arcisdms 262/tcp
-arcisdms 262/udp
-hdap 263/tcp
-hdap 263/udp
-bgmp 264/tcp
-bgmp 264/udp
-# 265-279 unassigned
-http-mgmt 280/tcp
-http-mgmt 280/udp
-personal-link 281/tcp
-personal-link 281/udp
-cableport-ax 282/tcp #cable port a/x
-cableport-ax 282/udp #cable port a/x
-# 283-307 unassigned
-novastorbakcup 308/tcp #novastor backup
-novastorbakcup 308/udp #novastor backup
-entrusttime 309/tcp
-entrusttime 309/udp
-bhmds 310/tcp
-bhmds 310/udp
-asip-webadmin 311/tcp #appleshare ip webadmin
-asip-webadmin 311/udp #appleshare ip webadmin
-vslmp 312/tcp
-vslmp 312/udp
-magenta-logic 313/tcp
-magenta-logic 313/udp
-opalis-robot 314/tcp
-opalis-robot 314/udp
-dpsi 315/tcp
-dpsi 315/udp
-decauth 316/tcp
-decauth 316/udp
-zannet 317/tcp
-zannet 317/udp
-# 318-320 #unassigned
-pip 321/tcp
-pip 321/udp
-# 322-343 #unassigned
-pdap 344/tcp #Prospero Data Access Protocol
-pdap 344/udp #Prospero Data Access Protocol
-pawserv 345/tcp #Perf Analysis Workbench
-pawserv 345/udp #Perf Analysis Workbench
-zserv 346/tcp #Zebra server
-zserv 346/udp #Zebra server
-fatserv 347/tcp #Fatmen Server
-fatserv 347/udp #Fatmen Server
-csi-sgwp 348/tcp #Cabletron Management Protocol
-csi-sgwp 348/udp #Cabletron Management Protocol
-mftp 349/tcp
-mftp 349/udp
-matip-type-a 350/tcp #MATIP Type A
-matip-type-a 350/udp
-matip-type-b 351/tcp #MATIP Type B
-matip-type-b 351/udp
-bhoetty 351/tcp #unassigned but widespread use
-bhoetty 351/udp #unassigned but widespread use
-dtag-ste-sb 352/tcp #DTAG
-dtag-ste-sb 352/udp #DTAG
-bhoedap4 352/tcp #unassigned but widespread use
-bhoedap4 352/udp #unassigned but widespread use
-ndsauth 353/tcp
-ndsauth 353/udp
-bh611 354/tcp
-bh611 354/udp
-datex-asn 355/tcp
-datex-asn 355/udp
-cloanto-net-1 356/tcp #Cloanto Net 1
-cloanto-net-1 356/udp
-bhevent 357/tcp
-bhevent 357/udp
-shrinkwrap 358/tcp
-shrinkwrap 358/udp
-tenebris_nts 359/tcp #Tenebris Network Trace Service
-tenebris_nts 359/udp #Tenebris Network Trace Service
-scoi2odialog 360/tcp
-scoi2odialog 360/udp
-semantix 361/tcp
-semantix 361/udp
-srssend 362/tcp #SRS Send
-srssend 362/udp #SRS Send
-rsvp_tunnel 363/tcp
-rsvp_tunnel 363/udp
-aurora-cmgr 364/tcp
-aurora-cmgr 364/udp
-dtk 365/tcp #Deception Tool Kit - Fred Cohen <fc@all.net>
-dtk 365/udp #Deception Tool Kit - Fred Cohen <fc@all.net>
-odmr 366/tcp
-odmr 366/udp
-mortgageware 367/tcp
-mortgageware 367/udp
-qbikgdp 368/tcp #QbikGDP
-qbikgdp 368/udp
-rpc2portmap 369/tcp
-rpc2portmap 369/udp
-codaauth2 370/tcp
-codaauth2 370/udp
-clearcase 371/tcp
-clearcase 371/udp
-ulistserv 372/tcp ulistproc #Unix Listserv
-ulistserv 372/udp ulistproc #Unix Listserv
-legent-1 373/tcp #Legent Corporation (now Computer Associates Intl.)
-legent-1 373/udp #Legent Corporation (now Computer Associates Intl.)
-legent-2 374/tcp #Legent Corporation (now Computer Associates Intl.)
-legent-2 374/udp #Legent Corporation (now Computer Associates Intl.)
-hassle 375/tcp
-hassle 375/udp
-nip 376/tcp #Amiga Envoy Network Inquiry Proto
-nip 376/udp #Amiga Envoy Network Inquiry Proto
-tnETOS 377/tcp #NEC Corporation
-tnETOS 377/udp #NEC Corporation
-dsETOS 378/tcp #NEC Corporation
-dsETOS 378/udp #NEC Corporation
-is99c 379/tcp #TIA/EIA/IS-99 modem client
-is99c 379/udp #TIA/EIA/IS-99 modem client
-is99s 380/tcp #TIA/EIA/IS-99 modem server
-is99s 380/udp #TIA/EIA/IS-99 modem server
-hp-collector 381/tcp #hp performance data collector
-hp-collector 381/udp #hp performance data collector
-hp-managed-node 382/tcp #hp performance data managed node
-hp-managed-node 382/udp #hp performance data managed node
-hp-alarm-mgr 383/tcp #hp performance data alarm manager
-hp-alarm-mgr 383/udp #hp performance data alarm manager
-arns 384/tcp #A Remote Network Server System
-arns 384/udp #A Remote Network Server System
-ibm-app 385/tcp #IBM Application
-ibm-app 385/udp #IBM Application
-asa 386/tcp #ASA Message Router Object Def.
-asa 386/udp #ASA Message Router Object Def.
-aurp 387/tcp #Appletalk Update-Based Routing Pro.
-aurp 387/udp #Appletalk Update-Based Routing Pro.
-unidata-ldm 388/tcp #Unidata LDM Version 4
-unidata-ldm 388/udp #Unidata LDM Version 4
-ldap 389/tcp #Lightweight Directory Access Protocol
-ldap 389/udp #Lightweight Directory Access Protocol
-uis 390/tcp
-uis 390/udp
-synotics-relay 391/tcp #SynOptics SNMP Relay Port
-synotics-relay 391/udp #SynOptics SNMP Relay Port
-synotics-broker 392/tcp #SynOptics Port Broker Port
-synotics-broker 392/udp #SynOptics Port Broker Port
-dis 393/tcp #Data Interpretation System
-dis 393/udp #Data Interpretation System
-embl-ndt 394/tcp #EMBL Nucleic Data Transfer
-embl-ndt 394/udp #EMBL Nucleic Data Transfer
-netcp 395/tcp #NETscout Control Protocol
-netcp 395/udp #NETscout Control Protocol
-netware-ip 396/tcp #Novell Netware over IP
-netware-ip 396/udp #Novell Netware over IP
-mptn 397/tcp #Multi Protocol Trans. Net.
-mptn 397/udp #Multi Protocol Trans. Net.
-kryptolan 398/tcp
-kryptolan 398/udp
-iso-tsap-c2 399/tcp #ISO-TSAP Class 2
-iso-tsap-c2 399/udp #ISO-TSAP Class 2
-work-sol 400/tcp #Workstation Solutions
-work-sol 400/udp #Workstation Solutions
-ups 401/tcp #Uninterruptible Power Supply
-ups 401/udp #Uninterruptible Power Supply
-genie 402/tcp #Genie Protocol
-genie 402/udp #Genie Protocol
-decap 403/tcp
-decap 403/udp
-nced 404/tcp
-nced 404/udp
-ncld 405/tcp
-ncld 405/udp
-imsp 406/tcp #Interactive Mail Support Protocol
-imsp 406/udp #Interactive Mail Support Protocol
-timbuktu 407/tcp
-timbuktu 407/udp
-prm-sm 408/tcp #Prospero Resource Manager Sys. Man.
-prm-sm 408/udp #Prospero Resource Manager Sys. Man.
-prm-nm 409/tcp #Prospero Resource Manager Node Man.
-prm-nm 409/udp #Prospero Resource Manager Node Man.
-decladebug 410/tcp #DECLadebug Remote Debug Protocol
-decladebug 410/udp #DECLadebug Remote Debug Protocol
-rmt 411/tcp #Remote MT Protocol
-rmt 411/udp #Remote MT Protocol
-synoptics-trap 412/tcp #Trap Convention Port
-synoptics-trap 412/udp #Trap Convention Port
-smsp 413/tcp
-smsp 413/udp
-infoseek 414/tcp
-infoseek 414/udp
-bnet 415/tcp
-bnet 415/udp
-silverplatter 416/tcp
-silverplatter 416/udp
-onmux 417/tcp
-onmux 417/udp
-hyper-g 418/tcp
-hyper-g 418/udp
-ariel1 419/tcp
-ariel1 419/udp
-smpte 420/tcp
-smpte 420/udp
-ariel2 421/tcp
-ariel2 421/udp
-ariel3 422/tcp
-ariel3 422/udp
-opc-job-start 423/tcp #IBM Operations Planning and Control Start
-opc-job-start 423/udp #IBM Operations Planning and Control Start
-opc-job-track 424/tcp #IBM Operations Planning and Control Track
-opc-job-track 424/udp #IBM Operations Planning and Control Track
-icad-el 425/tcp
-icad-el 425/udp
-smartsdp 426/tcp
-smartsdp 426/udp
-svrloc 427/tcp #Server Location
-svrloc 427/udp #Server Location
-ocs_cmu 428/tcp
-ocs_cmu 428/udp
-ocs_amu 429/tcp
-ocs_amu 429/udp
-utmpsd 430/tcp
-utmpsd 430/udp
-utmpcd 431/tcp
-utmpcd 431/udp
-iasd 432/tcp
-iasd 432/udp
-nnsp 433/tcp
-nnsp 433/udp
-mobileip-agent 434/tcp
-mobileip-agent 434/udp
-mobilip-mn 435/tcp
-mobilip-mn 435/udp
-dna-cml 436/tcp
-dna-cml 436/udp
-comscm 437/tcp
-comscm 437/udp
-dsfgw 438/tcp
-dsfgw 438/udp
-dasp 439/tcp
-dasp 439/udp
-sgcp 440/tcp
-sgcp 440/udp
-decvms-sysmgt 441/tcp
-decvms-sysmgt 441/udp
-cvc_hostd 442/tcp
-cvc_hostd 442/udp
-https 443/tcp
-https 443/udp
-snpp 444/tcp #Simple Network Paging Protocol
-snpp 444/udp #Simple Network Paging Protocol
-# [RFC1568]
-microsoft-ds 445/tcp
-microsoft-ds 445/udp
-ddm-rdb 446/tcp
-ddm-rdb 446/udp
-ddm-dfm 447/tcp
-ddm-dfm 447/udp
-ddm-ssl 448/tcp ddm-byte
-ddm-ssl 448/udp ddm-byte
-as-servermap 449/tcp #AS Server Mapper
-as-servermap 449/udp #AS Server Mapper
-tserver 450/tcp
-tserver 450/udp
-sfs-smp-net 451/tcp #Cray Network Semaphore server
-sfs-smp-net 451/udp #Cray Network Semaphore server
-sfs-config 452/tcp #Cray SFS config server
-sfs-config 452/udp #Cray SFS config server
-creativeserver 453/tcp #CreativeServer
-creativeserver 453/udp #CreativeServer
-contentserver 454/tcp #ContentServer
-contentserver 454/udp #ContentServer
-creativepartnr 455/tcp #CreativePartnr
-creativepartnr 455/udp #CreativePartnr
-macon-tcp 456/tcp
-macon-udp 456/udp
-scohelp 457/tcp
-scohelp 457/udp
-appleqtc 458/tcp #apple quick time
-appleqtc 458/udp #apple quick time
-ampr-rcmd 459/tcp
-ampr-rcmd 459/udp
-skronk 460/tcp
-skronk 460/udp
-datasurfsrv 461/tcp
-datasurfsrv 461/udp
-datasurfsrvsec 462/tcp
-datasurfsrvsec 462/udp
-alpes 463/tcp
-alpes 463/udp
-#
-kpasswd5 464/tcp # Kerberos (v5)
-kpasswd5 464/udp # Kerberos (v5)
-#PROBLEMS!==============================================================
-# IANA has offically assigned these two ports as ``kpasswd''
-#kpasswd 464/tcp # Kerberos (v5)
-#kpasswd 464/udp # Kerberos (v5)
-#PROBLEMS!==============================================================
-smtps 465/tcp #smtp protocol over TLS/SSL (was ssmtp)
-smtps 465/udp #smtp protocol over TLS/SSL (was ssmtp)
-digital-vrc 466/tcp
-digital-vrc 466/udp
-mylex-mapd 467/tcp
-mylex-mapd 467/udp
-photuris 468/tcp
-photuris 468/udp
-rcp 469/tcp #Radio Control Protocol
-rcp 469/udp #Radio Control Protocol
-scx-proxy 470/tcp
-scx-proxy 470/udp
-mondex 471/tcp
-mondex 471/udp
-ljk-login 472/tcp
-ljk-login 472/udp
-hybrid-pop 473/tcp
-hybrid-pop 473/udp
-tn-tl-w1 474/tcp
-tn-tl-w2 474/udp
-tcpnethaspsrv 475/tcp
-tcpnethaspsrv 475/udp
-tn-tl-fd1 476/tcp
-tn-tl-fd1 476/udp
-ss7ns 477/tcp
-ss7ns 477/udp
-spsc 478/tcp
-spsc 478/udp
-iafserver 479/tcp
-iafserver 479/udp
-iafdbase 480/tcp
-iafdbase 480/udp
-ph 481/tcp
-ph 481/udp
-bgs-nsi 482/tcp
-bgs-nsi 482/udp
-ulpnet 483/tcp
-ulpnet 483/udp
-integra-sme 484/tcp #Integra Software Management Environment
-integra-sme 484/udp #Integra Software Management Environment
-powerburst 485/tcp #Air Soft Power Burst
-powerburst 485/udp #Air Soft Power Burst
-avian 486/tcp
-avian 486/udp
-saft 487/tcp #saft Simple Asynchronous File Transfer
-saft 487/udp #saft Simple Asynchronous File Transfer
-gss-http 488/tcp
-gss-http 488/udp
-nest-protocol 489/tcp
-nest-protocol 489/udp
-micom-pfs 490/tcp
-micom-pfs 490/udp
-go-login 491/tcp
-go-login 491/udp
-ticf-1 492/tcp #Transport Independent Convergence for FNA
-ticf-1 492/udp #Transport Independent Convergence for FNA
-ticf-2 493/tcp #Transport Independent Convergence for FNA
-ticf-2 493/udp #Transport Independent Convergence for FNA
-pov-ray 494/tcp
-pov-ray 494/udp
-intecourier 495/tcp
-intecourier 495/udp
-pim-rp-disc 496/tcp
-pim-rp-disc 496/udp
-dantz 497/tcp
-dantz 497/udp
-siam 498/tcp
-siam 498/udp
-iso-ill 499/tcp #ISO ILL Protocol
-iso-ill 499/udp #ISO ILL Protocol
-isakmp 500/tcp
-isakmp 500/udp
-stmf 501/tcp
-stmf 501/udp
-asa-appl-proto 502/tcp
-asa-appl-proto 502/udp
-intrinsa 503/tcp
-intrinsa 503/udp
-citadel 504/tcp
-citadel 504/udp
-mailbox-lm 505/tcp
-mailbox-lm 505/udp
-ohimsrv 506/tcp
-ohimsrv 506/udp
-crs 507/tcp
-crs 507/udp
-xvttp 508/tcp
-xvttp 508/udp
-snare 509/tcp
-snare 509/udp
-fcp 510/tcp #FirstClass Protocol
-fcp 510/udp #FirstClass Protocol
-passgo 511/tcp
-passgo 511/udp
-#
-# Berkeley-specific services
-#
-exec 512/tcp #remote process execution;
-# authentication performed using
-# passwords and UNIX login names
-biff 512/udp comsat #used by mail system to notify users
-# of new mail received; currently
-# receives messages only from
-# processes on the same machine
-login 513/tcp #remote login a la telnet;
-# automatic authentication performed
-# based on priviledged port numbers
-# and distributed data bases which
-# identify "authentication domains"
-who 513/udp whod #maintains data bases showing who's
-# logged in to machines on a local
-# net and the load average of the
-# machine
-shell 514/tcp cmd #like exec, but automatic
-# authentication is performed as for
-# login server
-syslog 514/udp
-printer 515/tcp spooler
-printer 515/udp spooler
-videotex 516/tcp
-videotex 516/udp
-talk 517/tcp #like tenex link, but across
-# machine - unfortunately, doesn't
-# use link protocol (this is actually
-# just a rendezvous port from which a
-# tcp connection is established)
-talk 517/udp #like tenex link, but across
-# machine - unfortunately, doesn't
-# use link protocol (this is actually
-# just a rendezvous port from which a
-# tcp connection is established)
-ntalk 518/tcp
-ntalk 518/udp
-utime 519/tcp unixtime
-utime 519/udp unixtime
-efs 520/tcp #extended file name server
-router 520/udp route routed #local routing process (on site);
-# uses variant of Xerox NS routing
-# information protocol
-ripng 521/tcp
-ripng 521/udp
-ulp 522/tcp
-ulp 522/udp
-ibm-db2 523/tcp
-ibm-db2 523/udp
-ncp 524/tcp
-ncp 524/udp
-timed 525/tcp timeserver
-timed 525/udp timeserver
-tempo 526/tcp newdate
-tempo 526/udp newdate
-stx 527/tcp #Stock IXChange
-stx 527/udp #Stock IXChange
-custix 528/tcp #Customer IXChange
-custix 528/udp #Customer IXChange
-irc-serv 529/tcp
-irc-serv 529/udp
-courier 530/tcp rpc
-courier 530/udp rpc
-conference 531/tcp chat
-conference 531/udp chat
-netnews 532/tcp readnews
-netnews 532/udp readnews
-netwall 533/tcp #for emergency broadcasts
-netwall 533/udp #for emergency broadcasts
-mm-admin 534/tcp #MegaMedia Admin
-mm-admin 534/udp #MegaMedia Admin
-iiop 535/tcp
-iiop 535/udp
-opalis-rdv 536/tcp
-opalis-rdv 536/udp
-nmsp 537/tcp #Networked Media Streaming Protocol
-nmsp 537/udp #Networked Media Streaming Protocol
-gdomap 538/tcp
-gdomap 538/udp
-apertus-ldp 539/tcp #Apertus Technologies Load Determination
-apertus-ldp 539/udp #Apertus Technologies Load Determination
-uucp 540/tcp uucpd
-uucp 540/udp uucpd
-uucp-rlogin 541/tcp
-uucp-rlogin 541/udp
-commerce 542/tcp
-commerce 542/udp
-klogin 543/tcp # Kerberos (v4/v5)
-klogin 543/udp # Kerberos (v4/v5)
-kshell 544/tcp krcmd # Kerberos (v4/v5)
-kshell 544/udp krcmd # Kerberos (v4/v5)
-appleqtcsrvr 545/tcp
-appleqtcsrvr 545/udp
-dhcpv6-client 546/tcp #DHCPv6 Client
-dhcpv6-client 546/udp #DHCPv6 Client
-dhcpv6-server 547/tcp #DHCPv6 Server
-dhcpv6-server 547/udp #DHCPv6 Server
-afpovertcp 548/tcp #AFP over TCP
-afpovertcp 548/udp #AFP over TCP
-idfp 549/tcp
-idfp 549/udp
-new-rwho 550/tcp new-who
-new-rwho 550/udp new-who
-cybercash 551/tcp
-cybercash 551/udp
-deviceshare 552/tcp
-deviceshare 552/udp
-pirp 553/tcp
-pirp 553/udp
-rtsp 554/tcp #Real Time Stream Control Protocol
-rtsp 554/udp #Real Time Stream Control Protocol
-dsf 555/tcp
-dsf 555/udp
-remotefs 556/tcp rfs rfs_server # Brunhoff remote filesystem
-remotefs 556/udp rfs rfs_server # Brunhoff remote filesystem
-openvms-sysipc 557/tcp
-openvms-sysipc 557/udp
-sdnskmp 558/tcp
-sdnskmp 558/udp
-teedtap 559/tcp
-teedtap 559/udp
-rmonitor 560/tcp rmonitord
-rmonitor 560/udp rmonitord
-monitor 561/tcp
-monitor 561/udp
-chshell 562/tcp chcmd
-chshell 562/udp chcmd
-nntps 563/tcp snntp #nntp protocol over TLS/SSL
-nntps 563/udp snntp #nntp protocol over TLS/SSL
-9pfs 564/tcp #plan 9 file service
-9pfs 564/udp #plan 9 file service
-whoami 565/tcp
-whoami 565/udp
-streettalk 566/tcp
-banyan-rpc 567/tcp
-banyan-rpc 567/udp
-ms-shuttle 568/tcp #Microsoft shuttle
-ms-shuttle 568/udp #Microsoft shuttle
-ms-rome 569/tcp #Microsoft rome
-ms-rome 569/udp #Microsoft rome
-meter 570/tcp #demon
-meter 570/udp #demon
-umeter 571/tcp #udemon
-umeter 571/udp #udemon
-sonar 572/tcp
-sonar 572/udp
-banyan-vip 573/tcp
-banyan-vip 573/udp
-ftp-agent 574/tcp #FTP Software Agent System
-ftp-agent 574/udp #FTP Software Agent System
-vemmi 575/tcp
-vemmi 575/udp
-ipcd 576/tcp
-ipcd 576/udp
-vnas 577/tcp
-vnas 577/udp
-ipdd 578/tcp
-ipdd 578/udp
-decbsrv 579/tcp
-decbsrv 579/udp
-sntp-heartbeat 580/tcp
-sntp-heartbeat 580/udp
-bdp 581/tcp #Bundle Discovery Protocol
-bdp 581/udp #Bundle Discovery Protocol
-scc-security 582/tcp
-scc-security 582/udp
-philips-vc 583/tcp #Philips Video-Conferencing
-philips-vc 583/udp #Philips Video-Conferencing
-keyserver 584/tcp
-keyserver 584/udp
-#imap4-ssl@585 never should have been allocated. See PR 46294.
-#imap4-ssl 585/tcp #IMAP4+SSL (use of 585 is not recommended,
-#imap4-ssl 585/udp # use 993 instead)
-password-chg 586/tcp
-password-chg 586/udp
-submission 587/tcp
-submission 587/udp
-cal 588/tcp
-cal 588/udp
-eyelink 589/tcp
-eyelink 589/udp
-tns-cml 590/tcp
-tns-cml 590/udp
-http-alt 591/tcp #FileMaker, Inc. - HTTP Alternate (see Port 80)
-http-alt 591/udp #FileMaker, Inc. - HTTP Alternate (see Port 80)
-eudora-set 592/tcp
-eudora-set 592/udp
-http-rpc-epmap 593/tcp #HTTP RPC Ep Map
-http-rpc-epmap 593/udp #HTTP RPC Ep Map
-tpip 594/tcp
-tpip 594/udp
-cab-protocol 595/tcp
-cab-protocol 595/udp
-smsd 596/tcp
-smsd 596/udp
-ptcnameservice 597/tcp #PTC Name Service
-ptcnameservice 597/udp #PTC Name Service
-sco-websrvrmg3 598/tcp #SCO Web Server Manager 3
-sco-websrvrmg3 598/udp #SCO Web Server Manager 3
-acp 599/tcp #Aeolon Core Protocol
-acp 599/udp #Aeolon Core Protocol
-ipcserver 600/tcp #Sun IPC server
-ipcserver 600/udp #Sun IPC server
-urm 606/tcp #Cray Unified Resource Manager
-urm 606/udp #Cray Unified Resource Manager
-nqs 607/tcp
-nqs 607/udp
-sift-uft 608/tcp #Sender-Initiated/Unsolicited File Transfer
-sift-uft 608/udp #Sender-Initiated/Unsolicited File Transfer
-npmp-trap 609/tcp
-npmp-trap 609/udp
-npmp-local 610/tcp
-npmp-local 610/udp
-npmp-gui 611/tcp
-npmp-gui 611/udp
-sshell 614/tcp #SSLshell
-sshell 614/udp
-ipp 631/tcp #IPP (Internet Printing Protocol)
-ipp 631/udp #IPP (Internet Printing Protocol)
-ginad 634/tcp
-ginad 634/udp
-ldaps 636/tcp sldap #ldap protocol over TLS/SSL
-ldaps 636/udp sldap
-aodv 654/tcp #Ad-Hoc On-Demand Distance Vector Routing Protocol
-aodv 654/udp #Ad-Hoc On-Demand Distance Vector Routing Protocol
-mdqs 666/tcp
-mdqs 666/udp
-#PROBLEMS!===============================================
-doom 666/tcp #doom Id Software
-doom 666/udp #doom Id Software
-#PROBLEMS!===============================================
-acap 674/tcp #Application Configuration Access Protocol
-acap 674/udp #Application Configuration Access Protocol
-elcsd 704/tcp #errlog copy/server daemon
-elcsd 704/udp #errlog copy/server daemon
-entrustmanager 709/tcp #EntrustManager
-entrustmanager 709/udp #EntrustManager
-netviewdm1 729/tcp #IBM NetView DM/6000 Server/Client
-netviewdm1 729/udp #IBM NetView DM/6000 Server/Client
-netviewdm2 730/tcp #IBM NetView DM/6000 send/tcp
-netviewdm2 730/udp #IBM NetView DM/6000 send/tcp
-netviewdm3 731/tcp #IBM NetView DM/6000 receive/tcp
-netviewdm3 731/udp #IBM NetView DM/6000 receive/tcp
-netgw 741/tcp
-netgw 741/udp
-netrcs 742/tcp #Network based Rev. Cont. Sys.
-netrcs 742/udp #Network based Rev. Cont. Sys.
-flexlm 744/tcp #Flexible License Manager
-flexlm 744/udp #Flexible License Manager
-fujitsu-dev 747/tcp #Fujitsu Device Control
-fujitsu-dev 747/udp #Fujitsu Device Control
-ris-cm 748/tcp #Russell Info Sci Calendar Manager
-ris-cm 748/udp #Russell Info Sci Calendar Manager
-kerberos-adm 749/tcp #Kerberos administration (v5)
-kerberos-adm 749/udp #Kerberos administration (v5)
-kerberos-iv 750/udp kdc # Kerberos (v4)
-kerberos-iv 750/tcp kdc # Kerberos (v4)
-#PROBLEMS!========================================================
-#rfile 750/tcp
-#loadav 750/udp
-#PROBLEMS!========================================================
-kerberos_master 751/tcp # Kerberos `kadmin' (v4)
-kerberos_master 751/udp # Kerberos `kadmin' (v4)
-#PROBLEMS!========================================================
-pump 751/tcp
-pump 751/udp
-#PROBLEMS!========================================================
-qrh 752/tcp
-qrh 752/udp
-rrh 753/tcp
-rrh 753/udp
-krb_prop 754/tcp krb5_prop # kerberos/v5 server propagation
-#PROBLEMS!========================================================
-tell 754/tcp #send
-#PROBLEMS!========================================================
-tell 754/udp #send
-nlogin 758/tcp
-nlogin 758/udp
-con 759/tcp
-con 759/udp
-krbupdate 760/tcp kreg # Kerberos (v4) registration
-#PROBLEMS!========================================================
-ns 760/tcp
-#PROBLEMS!========================================================
-ns 760/udp
-kpasswd 761/tcp kpwd # Kerberos (v4) "passwd"
-#PROBLEMS!========================================================
-rxe 761/tcp
-#PROBLEMS!========================================================
-rxe 761/udp
-quotad 762/tcp
-quotad 762/udp
-cycleserv 763/tcp
-cycleserv 763/udp
-omserv 764/tcp
-omserv 764/udp
-webster 765/tcp
-webster 765/udp
-phonebook 767/tcp #phone
-phonebook 767/udp #phone
-vid 769/tcp
-vid 769/udp
-cadlock 770/tcp
-cadlock 770/udp
-rtip 771/tcp
-rtip 771/udp
-cycleserv2 772/tcp
-cycleserv2 772/udp
-submit 773/tcp
-notify 773/udp
-rpasswd 774/tcp
-acmaint_dbd 774/udp
-entomb 775/tcp
-acmaint_transd 775/udp
-wpages 776/tcp
-wpages 776/udp
-wpgs 780/tcp
-wpgs 780/udp
-concert 786/tcp
-concert 786/udp
-mdbs_daemon 800/tcp
-mdbs_daemon 800/udp
-device 801/tcp
-device 801/udp
-supfilesrv 871/tcp # for SUP
-rsync 873/tcp
-rsync 873/udp
-accessbuilder 888/tcp
-accessbuilder 888/udp
-swat 901/tcp # samba web configuration tool
-rndc 953/tcp # named's rndc control socket
-ftps-data 989/tcp # ftp protocol, data, over TLS/SSL
-ftps-data 989/udp
-ftps 990/tcp # ftp protocol, control, over TLS/SSL
-ftps 990/udp
-telnets 992/tcp # telnet protocol over TLS/SSL
-telnets 992/udp
-imaps 993/tcp # imap4 protocol over TLS/SSL
-imaps 993/udp
-ircs 994/tcp # irc protocol over TLS/SSL
-ircs 994/udp
-pop3s 995/tcp spop3 # pop3 protocol over TLS/SSL
-pop3s 995/udp spop3
-vsinet 996/tcp
-vsinet 996/udp
-maitrd 997/tcp
-maitrd 997/udp
-busboy 998/tcp
-puparp 998/udp
-garcon 999/tcp
-applix 999/udp #Applix ac
-puprouter 999/tcp
-puprouter 999/udp
-cadlock2 1000/tcp
-cadlock2 1000/udp
-#
-# REGISTERED PORT NUMBERS
-#
-blackjack 1025/tcp #network blackjack
-blackjack 1025/udp #network blackjack
-iad1 1030/tcp #BBN IAD
-iad1 1030/udp #BBN IAD
-iad2 1031/tcp #BBN IAD
-iad2 1031/udp #BBN IAD
-iad3 1032/tcp #BBN IAD
-iad3 1032/udp #BBN IAD
-nim 1058/tcp
-nim 1058/udp
-nimreg 1059/tcp
-nimreg 1059/udp
-instl_boots 1067/tcp #Installation Bootstrap Proto. Serv.
-instl_boots 1067/udp #Installation Bootstrap Proto. Serv.
-instl_bootc 1068/tcp #Installation Bootstrap Proto. Cli.
-instl_bootc 1068/udp #Installation Bootstrap Proto. Cli.
-socks 1080/tcp
-socks 1080/udp
-ansoft-lm-1 1083/tcp #Anasoft License Manager
-ansoft-lm-1 1083/udp #Anasoft License Manager
-ansoft-lm-2 1084/tcp #Anasoft License Manager
-ansoft-lm-2 1084/udp #Anasoft License Manager
-webobjects 1085/tcp #Web Objects
-webobjects 1085/udp #Web Objects
-kpop 1109/tcp #Unofficial
-kpop 1109/udp #Unofficial
-nfsd-status 1110/tcp #Cluster status info
-nfsd-keepalive 1110/udp #Client status info
-supfiledbg 1127/tcp # for SUP
-nfa 1155/tcp #Network File Access
-nfa 1155/udp #Network File Access
-phone 1167/udp #conference calling
-skkserv 1178/tcp #SKK (kanji input)
-lupa 1212/tcp
-lupa 1212/udp
-nerv 1222/tcp #SNI R&D network
-nerv 1222/udp #SNI R&D network
-hermes 1248/tcp
-hermes 1248/udp
-healthd 1281/tcp #healthd
-healthd 1281/udp #healthd
-alta-ana-lm 1346/tcp #Alta Analytics License Manager
-alta-ana-lm 1346/udp #Alta Analytics License Manager
-bbn-mmc 1347/tcp #multi media conferencing
-bbn-mmc 1347/udp #multi media conferencing
-bbn-mmx 1348/tcp #multi media conferencing
-bbn-mmx 1348/udp #multi media conferencing
-sbook 1349/tcp #Registration Network Protocol
-sbook 1349/udp #Registration Network Protocol
-editbench 1350/tcp #Registration Network Protocol
-editbench 1350/udp #Registration Network Protocol
-equationbuilder 1351/tcp #Digital Tool Works (MIT)
-equationbuilder 1351/udp #Digital Tool Works (MIT)
-lotusnote 1352/tcp #Lotus Note
-lotusnote 1352/udp #Lotus Note
-relief 1353/tcp #Relief Consulting
-relief 1353/udp #Relief Consulting
-rightbrain 1354/tcp #RightBrain Software
-rightbrain 1354/udp #RightBrain Software
-intuitive-edge 1355/tcp #Intuitive Edge
-intuitive-edge 1355/udp #Intuitive Edge
-cuillamartin 1356/tcp #CuillaMartin Company
-cuillamartin 1356/udp #CuillaMartin Company
-pegboard 1357/tcp #Electronic PegBoard
-pegboard 1357/udp #Electronic PegBoard
-connlcli 1358/tcp
-connlcli 1358/udp
-ftsrv 1359/tcp
-ftsrv 1359/udp
-mimer 1360/tcp
-mimer 1360/udp
-linx 1361/tcp
-linx 1361/udp
-timeflies 1362/tcp
-timeflies 1362/udp
-ndm-requester 1363/tcp #Network DataMover Requester
-ndm-requester 1363/udp #Network DataMover Requester
-ndm-server 1364/tcp #Network DataMover Server
-ndm-server 1364/udp #Network DataMover Server
-adapt-sna 1365/tcp #Network Software Associates
-adapt-sna 1365/udp #Network Software Associates
-netware-csp 1366/tcp #Novell NetWare Comm Service Platform
-netware-csp 1366/udp #Novell NetWare Comm Service Platform
-dcs 1367/tcp
-dcs 1367/udp
-screencast 1368/tcp
-screencast 1368/udp
-gv-us 1369/tcp #GlobalView to Unix Shell
-gv-us 1369/udp #GlobalView to Unix Shell
-us-gv 1370/tcp #Unix Shell to GlobalView
-us-gv 1370/udp #Unix Shell to GlobalView
-fc-cli 1371/tcp #Fujitsu Config Protocol
-fc-cli 1371/udp #Fujitsu Config Protocol
-fc-ser 1372/tcp #Fujitsu Config Protocol
-fc-ser 1372/udp #Fujitsu Config Protocol
-chromagrafx 1373/tcp
-chromagrafx 1373/udp
-molly 1374/tcp #EPI Software Systems
-molly 1374/udp #EPI Software Systems
-bytex 1375/tcp
-bytex 1375/udp
-ibm-pps 1376/tcp #IBM Person to Person Software
-ibm-pps 1376/udp #IBM Person to Person Software
-cichlid 1377/tcp #Cichlid License Manager
-cichlid 1377/udp #Cichlid License Manager
-elan 1378/tcp #Elan License Manager
-elan 1378/udp #Elan License Manager
-dbreporter 1379/tcp #Integrity Solutions
-dbreporter 1379/udp #Integrity Solutions
-telesis-licman 1380/tcp #Telesis Network License Manager
-telesis-licman 1380/udp #Telesis Network License Manager
-apple-licman 1381/tcp #Apple Network License Manager
-apple-licman 1381/udp #Apple Network License Manager
-#udt_os 1382/tcp
-#udt_os 1382/udp
-gwha 1383/tcp #GW Hannaway Network License Manager
-gwha 1383/udp #GW Hannaway Network License Manager
-os-licman 1384/tcp #Objective Solutions License Manager
-os-licman 1384/udp #Objective Solutions License Manager
-atex_elmd 1385/tcp #Atex Publishing License Manager
-atex_elmd 1385/udp #Atex Publishing License Manager
-checksum 1386/tcp #CheckSum License Manager
-checksum 1386/udp #CheckSum License Manager
-cadsi-lm 1387/tcp #Computer Aided Design Software Inc LM
-cadsi-lm 1387/udp #Computer Aided Design Software Inc LM
-objective-dbc 1388/tcp #Objective Solutions DataBase Cache
-objective-dbc 1388/udp #Objective Solutions DataBase Cache
-iclpv-dm 1389/tcp #Document Manager
-iclpv-dm 1389/udp #Document Manager
-iclpv-sc 1390/tcp #Storage Controller
-iclpv-sc 1390/udp #Storage Controller
-iclpv-sas 1391/tcp #Storage Access Server
-iclpv-sas 1391/udp #Storage Access Server
-iclpv-pm 1392/tcp #Print Manager
-iclpv-pm 1392/udp #Print Manager
-iclpv-nls 1393/tcp #Network Log Server
-iclpv-nls 1393/udp #Network Log Server
-iclpv-nlc 1394/tcp #Network Log Client
-iclpv-nlc 1394/udp #Network Log Client
-iclpv-wsm 1395/tcp #PC Workstation Manager software
-iclpv-wsm 1395/udp #PC Workstation Manager software
-dvl-activemail 1396/tcp #DVL Active Mail
-dvl-activemail 1396/udp #DVL Active Mail
-audio-activmail 1397/tcp #Audio Active Mail
-audio-activmail 1397/udp #Audio Active Mail
-video-activmail 1398/tcp #Video Active Mail
-video-activmail 1398/udp #Video Active Mail
-cadkey-licman 1399/tcp #Cadkey License Manager
-cadkey-licman 1399/udp #Cadkey License Manager
-cadkey-tablet 1400/tcp #Cadkey Tablet Daemon
-cadkey-tablet 1400/udp #Cadkey Tablet Daemon
-goldleaf-licman 1401/tcp #Goldleaf License Manager
-goldleaf-licman 1401/udp #Goldleaf License Manager
-prm-sm-np 1402/tcp #Prospero Resource Manager
-prm-sm-np 1402/udp #Prospero Resource Manager
-prm-nm-np 1403/tcp #Prospero Resource Manager
-prm-nm-np 1403/udp #Prospero Resource Manager
-igi-lm 1404/tcp #Infinite Graphics License Manager
-igi-lm 1404/udp #Infinite Graphics License Manager
-ibm-res 1405/tcp #IBM Remote Execution Starter
-ibm-res 1405/udp #IBM Remote Execution Starter
-netlabs-lm 1406/tcp #NetLabs License Manager
-netlabs-lm 1406/udp #NetLabs License Manager
-dbsa-lm 1407/tcp #DBSA License Manager
-dbsa-lm 1407/udp #DBSA License Manager
-sophia-lm 1408/tcp #Sophia License Manager
-sophia-lm 1408/udp #Sophia License Manager
-here-lm 1409/tcp #Here License Manager
-here-lm 1409/udp #Here License Manager
-hiq 1410/tcp #HiQ License Manager
-hiq 1410/udp #HiQ License Manager
-af 1411/tcp #AudioFile
-af 1411/udp #AudioFile
-innosys 1412/tcp
-innosys 1412/udp
-innosys-acl 1413/tcp
-innosys-acl 1413/udp
-ibm-mqseries 1414/tcp #IBM MQSeries
-ibm-mqseries 1414/udp #IBM MQSeries
-dbstar 1415/tcp
-dbstar 1415/udp
-novell-lu6.2 1416/tcp #Novell LU6.2
-novell-lu6.2 1416/udp #Novell LU6.2
-timbuktu-srv1 1417/tcp #Timbuktu Service 1 Port
-timbuktu-srv1 1417/udp #Timbuktu Service 1 Port
-timbuktu-srv2 1418/tcp #Timbuktu Service 2 Port
-timbuktu-srv2 1418/udp #Timbuktu Service 2 Port
-timbuktu-srv3 1419/tcp #Timbuktu Service 3 Port
-timbuktu-srv3 1419/udp #Timbuktu Service 3 Port
-timbuktu-srv4 1420/tcp #Timbuktu Service 4 Port
-timbuktu-srv4 1420/udp #Timbuktu Service 4 Port
-gandalf-lm 1421/tcp #Gandalf License Manager
-gandalf-lm 1421/udp #Gandalf License Manager
-autodesk-lm 1422/tcp #Autodesk License Manager
-autodesk-lm 1422/udp #Autodesk License Manager
-essbase 1423/tcp #Essbase Arbor Software
-essbase 1423/udp #Essbase Arbor Software
-hybrid 1424/tcp #Hybrid Encryption Protocol
-hybrid 1424/udp #Hybrid Encryption Protocol
-zion-lm 1425/tcp #Zion Software License Manager
-zion-lm 1425/udp #Zion Software License Manager
-sas-1 1426/tcp #Satellite-data Acquisition System 1
-sas-1 1426/udp #Satellite-data Acquisition System 1
-mloadd 1427/tcp #mloadd monitoring tool
-mloadd 1427/udp #mloadd monitoring tool
-informatik-lm 1428/tcp #Informatik License Manager
-informatik-lm 1428/udp #Informatik License Manager
-nms 1429/tcp #Hypercom NMS
-nms 1429/udp #Hypercom NMS
-tpdu 1430/tcp #Hypercom TPDU
-tpdu 1430/udp #Hypercom TPDU
-rgtp 1431/tcp #Reverse Gossip Transport
-rgtp 1431/udp #Reverse Gossip Transport
-blueberry-lm 1432/tcp #Blueberry Software License Manager
-blueberry-lm 1432/udp #Blueberry Software License Manager
-ms-sql-s 1433/tcp #Microsoft-SQL-Server
-ms-sql-s 1433/udp #Microsoft-SQL-Server
-ms-sql-m 1434/tcp #Microsoft-SQL-Monitor
-ms-sql-m 1434/udp #Microsoft-SQL-Monitor
-ibm-cics 1435/tcp
-ibm-cics 1435/udp
-sas-2 1436/tcp #Satellite-data Acquisition System 2
-sas-2 1436/udp #Satellite-data Acquisition System 2
-tabula 1437/tcp
-tabula 1437/udp
-eicon-server 1438/tcp #Eicon Security Agent/Server
-eicon-server 1438/udp #Eicon Security Agent/Server
-eicon-x25 1439/tcp #Eicon X25/SNA Gateway
-eicon-x25 1439/udp #Eicon X25/SNA Gateway
-eicon-slp 1440/tcp #Eicon Service Location Protocol
-eicon-slp 1440/udp #Eicon Service Location Protocol
-cadis-1 1441/tcp #Cadis License Management
-cadis-1 1441/udp #Cadis License Management
-cadis-2 1442/tcp #Cadis License Management
-cadis-2 1442/udp #Cadis License Management
-ies-lm 1443/tcp #Integrated Engineering Software
-ies-lm 1443/udp #Integrated Engineering Software
-marcam-lm 1444/tcp #Marcam License Management
-marcam-lm 1444/udp #Marcam License Management
-proxima-lm 1445/tcp #Proxima License Manager
-proxima-lm 1445/udp #Proxima License Manager
-ora-lm 1446/tcp #Optical Research Associates License Manager
-ora-lm 1446/udp #Optical Research Associates License Manager
-apri-lm 1447/tcp #Applied Parallel Research LM
-apri-lm 1447/udp #Applied Parallel Research LM
-oc-lm 1448/tcp #OpenConnect License Manager
-oc-lm 1448/udp #OpenConnect License Manager
-peport 1449/tcp
-peport 1449/udp
-dwf 1450/tcp #Tandem Distributed Workbench Facility
-dwf 1450/udp #Tandem Distributed Workbench Facility
-infoman 1451/tcp #IBM Information Management
-infoman 1451/udp #IBM Information Management
-gtegsc-lm 1452/tcp #GTE Government Systems License Man
-gtegsc-lm 1452/udp #GTE Government Systems License Man
-genie-lm 1453/tcp #Genie License Manager
-genie-lm 1453/udp #Genie License Manager
-interhdl_elmd 1454/tcp #interHDL License Manager
-interhdl_elmd 1454/udp #interHDL License Manager
-esl-lm 1455/tcp #ESL License Manager
-esl-lm 1455/udp #ESL License Manager
-dca 1456/tcp
-dca 1456/udp
-valisys-lm 1457/tcp #Valisys License Manager
-valisys-lm 1457/udp #Valisys License Manager
-nrcabq-lm 1458/tcp #Nichols Research Corp.
-nrcabq-lm 1458/udp #Nichols Research Corp.
-proshare1 1459/tcp #Proshare Notebook Application
-proshare1 1459/udp #Proshare Notebook Application
-proshare2 1460/tcp #Proshare Notebook Application
-proshare2 1460/udp #Proshare Notebook Application
-ibm_wrless_lan 1461/tcp #IBM Wireless LAN
-ibm_wrless_lan 1461/udp #IBM Wireless LAN
-world-lm 1462/tcp #World License Manager
-world-lm 1462/udp #World License Manager
-nucleus 1463/tcp
-nucleus 1463/udp
-msl_lmd 1464/tcp #MSL License Manager
-msl_lmd 1464/udp #MSL License Manager
-pipes 1465/tcp #Pipes Platform
-pipes 1465/udp #Pipes Platform mfarlin@peerlogic.com
-oceansoft-lm 1466/tcp #Ocean Software License Manager
-oceansoft-lm 1466/udp #Ocean Software License Manager
-csdmbase 1467/tcp
-csdmbase 1467/udp
-csdm 1468/tcp
-csdm 1468/udp
-aal-lm 1469/tcp #Active Analysis Limited License Manager
-aal-lm 1469/udp #Active Analysis Limited License Manager
-uaiact 1470/tcp #Universal Analytics
-uaiact 1470/udp #Universal Analytics
-csdmbase 1471/tcp
-csdmbase 1471/udp
-csdm 1472/tcp
-csdm 1472/udp
-openmath 1473/tcp
-openmath 1473/udp
-telefinder 1474/tcp
-telefinder 1474/udp
-taligent-lm 1475/tcp #Taligent License Manager
-taligent-lm 1475/udp #Taligent License Manager
-clvm-cfg 1476/tcp
-clvm-cfg 1476/udp
-ms-sna-server 1477/tcp
-ms-sna-server 1477/udp
-ms-sna-base 1478/tcp
-ms-sna-base 1478/udp
-dberegister 1479/tcp
-dberegister 1479/udp
-pacerforum 1480/tcp
-pacerforum 1480/udp
-airs 1481/tcp
-airs 1481/udp
-miteksys-lm 1482/tcp #Miteksys License Manager
-miteksys-lm 1482/udp #Miteksys License Manager
-afs 1483/tcp #AFS License Manager
-afs 1483/udp #AFS License Manager
-confluent 1484/tcp #Confluent License Manager
-confluent 1484/udp #Confluent License Manager
-lansource 1485/tcp
-lansource 1485/udp
-nms_topo_serv 1486/tcp
-nms_topo_serv 1486/udp
-localinfosrvr 1487/tcp
-localinfosrvr 1487/udp
-docstor 1488/tcp
-docstor 1488/udp
-dmdocbroker 1489/tcp
-dmdocbroker 1489/udp
-insitu-conf 1490/tcp
-insitu-conf 1490/udp
-anynetgateway 1491/tcp
-anynetgateway 1491/udp
-stone-design-1 1492/tcp
-stone-design-1 1492/udp
-netmap_lm 1493/tcp
-netmap_lm 1493/udp
-ica 1494/tcp
-ica 1494/udp
-cvc 1495/tcp
-cvc 1495/udp
-liberty-lm 1496/tcp
-liberty-lm 1496/udp
-rfx-lm 1497/tcp
-rfx-lm 1497/udp
-watcom-sql 1498/tcp
-watcom-sql 1498/udp
-fhc 1499/tcp #Federico Heinz Consultora
-fhc 1499/udp #Federico Heinz Consultora
-vlsi-lm 1500/tcp #VLSI License Manager
-vlsi-lm 1500/udp #VLSI License Manager
-sas-3 1501/tcp #Satellite-data Acquisition System 3
-sas-3 1501/udp #Satellite-data Acquisition System 3
-shivadiscovery 1502/tcp #Shiva
-shivadiscovery 1502/udp #Shiva
-imtc-mcs 1503/tcp #Databeam
-imtc-mcs 1503/udp #Databeam
-evb-elm 1504/tcp #EVB Software Engineering License Manager
-evb-elm 1504/udp #EVB Software Engineering License Manager
-funkproxy 1505/tcp #Funk Software, Inc.
-funkproxy 1505/udp #Funk Software, Inc.
-utcd 1506/tcp #Universal Time daemon (utcd)
-utcd 1506/udp #Universal Time daemon (utcd)
-symplex 1507/tcp
-symplex 1507/udp
-diagmond 1508/tcp
-diagmond 1508/udp
-robcad-lm 1509/tcp #Robcad, Ltd. License Manager
-robcad-lm 1509/udp #Robcad, Ltd. License Manager
-mvx-lm 1510/tcp #Midland Valley Exploration Ltd. Lic. Man.
-mvx-lm 1510/udp #Midland Valley Exploration Ltd. Lic. Man.
-3l-l1 1511/tcp
-3l-l1 1511/udp
-wins 1512/tcp #Microsoft's Windows Internet Name Service
-wins 1512/udp #Microsoft's Windows Internet Name Service
-fujitsu-dtc 1513/tcp #Fujitsu Systems Business of America, Inc
-fujitsu-dtc 1513/udp #Fujitsu Systems Business of America, Inc
-fujitsu-dtcns 1514/tcp #Fujitsu Systems Business of America, Inc
-fujitsu-dtcns 1514/udp #Fujitsu Systems Business of America, Inc
-ifor-protocol 1515/tcp
-ifor-protocol 1515/udp
-vpad 1516/tcp #Virtual Places Audio data
-vpad 1516/udp #Virtual Places Audio data
-vpac 1517/tcp #Virtual Places Audio control
-vpac 1517/udp #Virtual Places Audio control
-vpvd 1518/tcp #Virtual Places Video data
-vpvd 1518/udp #Virtual Places Video data
-vpvc 1519/tcp #Virtual Places Video control
-vpvc 1519/udp #Virtual Places Video control
-atm-zip-office 1520/tcp #atm zip office
-atm-zip-office 1520/udp #atm zip office
-ncube-lm 1521/tcp #nCube License Manager
-ncube-lm 1521/udp #nCube License Manager
-rna-lm 1522/tcp #Ricardo North America License Manager
-rna-lm 1522/udp #Ricardo North America License Manager
-cichild-lm 1523/tcp
-cichild-lm 1523/udp
-ingreslock 1524/tcp #ingres
-ingreslock 1524/udp #ingres
-prospero-np 1525/tcp #Prospero Directory Service non-priv
-prospero-np 1525/udp #Prospero Directory Service non-priv
-#PROBLEMS!========================================================
-orasrv 1525/tcp #oracle
-orasrv 1525/udp #oracle
-#PROBLEMS!========================================================
-pdap-np 1526/tcp #Prospero Data Access Prot non-priv
-pdap-np 1526/udp #Prospero Data Access Prot non-priv
-tlisrv 1527/tcp #oracle
-tlisrv 1527/udp #oracle
-mciautoreg 1528/tcp
-mciautoreg 1528/udp
-support 1529/tcp prmsd gnatsd # cygnus bug tracker
-coauthor 1529/tcp #oracle
-coauthor 1529/udp #oracle
-rap-service 1530/tcp
-rap-service 1530/udp
-rap-listen 1531/tcp
-rap-listen 1531/udp
-miroconnect 1532/tcp
-miroconnect 1532/udp
-virtual-places 1533/tcp #Virtual Places Software
-virtual-places 1533/udp #Virtual Places Software
-micromuse-lm 1534/tcp
-micromuse-lm 1534/udp
-ampr-info 1535/tcp
-ampr-info 1535/udp
-ampr-inter 1536/tcp
-ampr-inter 1536/udp
-sdsc-lm 1537/tcp
-sdsc-lm 1537/udp
-3ds-lm 1538/tcp
-3ds-lm 1538/udp
-intellistor-lm 1539/tcp #Intellistor License Manager
-intellistor-lm 1539/udp #Intellistor License Manager
-rds 1540/tcp
-rds 1540/udp
-rds2 1541/tcp
-rds2 1541/udp
-gridgen-elmd 1542/tcp
-gridgen-elmd 1542/udp
-simba-cs 1543/tcp
-simba-cs 1543/udp
-aspeclmd 1544/tcp
-aspeclmd 1544/udp
-vistium-share 1545/tcp
-vistium-share 1545/udp
-abbaccuray 1546/tcp
-abbaccuray 1546/udp
-laplink 1547/tcp
-laplink 1547/udp
-axon-lm 1548/tcp #Axon License Manager
-axon-lm 1548/udp #Axon License Manager
-shivahose 1549/tcp #Shiva Hose
-shivasound 1549/udp #Shiva Sound
-3m-image-lm 1550/tcp #Image Storage license manager 3M Company
-3m-image-lm 1550/udp #Image Storage license manager 3M Company
-hecmtl-db 1551/tcp
-hecmtl-db 1551/udp
-pciarray 1552/tcp
-pciarray 1552/udp
-issd 1600/tcp
-issd 1600/udp
-# IMPORTANT NOTE: Ports 1645/1646 are the traditional radius ports used by
-# many vendors without obtaining official IANA assignment. The official
-# assignment is now ports 1812/1813 and users are encouraged to migrate
-# when possible to these new ports.
-#radius 1645/udp #RADIUS authentication protocol (old)
-#radacct 1646/udp #RADIUS accounting protocol (old)
-nkd 1650/tcp
-nkd 1650/udp
-shiva_confsrvr 1651/tcp
-shiva_confsrvr 1651/udp
-xnmp 1652/tcp
-xnmp 1652/udp
-netview-aix-1 1661/tcp
-netview-aix-1 1661/udp
-netview-aix-2 1662/tcp
-netview-aix-2 1662/udp
-netview-aix-3 1663/tcp
-netview-aix-3 1663/udp
-netview-aix-4 1664/tcp
-netview-aix-4 1664/udp
-netview-aix-5 1665/tcp
-netview-aix-5 1665/udp
-netview-aix-6 1666/tcp
-netview-aix-6 1666/udp
-netview-aix-7 1667/tcp
-netview-aix-7 1667/udp
-netview-aix-8 1668/tcp
-netview-aix-8 1668/udp
-netview-aix-9 1669/tcp
-netview-aix-9 1669/udp
-netview-aix-10 1670/tcp
-netview-aix-10 1670/udp
-netview-aix-11 1671/tcp
-netview-aix-11 1671/udp
-netview-aix-12 1672/tcp
-netview-aix-12 1672/udp
-l2f 1701/tcp #l2f
-l2f 1701/udp #l2f
-l2tp 1701/tcp #Layer 2 Tunnelling Protocol
-l2tp 1701/udp #Layer 2 Tunnelling Protocol
-pptp 1723/tcp #Point-to-point tunnelling protocol
-# IMPORTANT NOTE: See comments for ports 1645/1646 when using older equipment
-radius 1812/udp #RADIUS authentication protocol (IANA sanctioned)
-radacct 1813/udp #RADIUS accounting protocol (IANA sanctioned)
-licensedaemon 1986/tcp #cisco license management
-licensedaemon 1986/udp #cisco license management
-tr-rsrb-p1 1987/tcp #cisco RSRB Priority 1 port
-tr-rsrb-p1 1987/udp #cisco RSRB Priority 1 port
-tr-rsrb-p2 1988/tcp #cisco RSRB Priority 2 port
-tr-rsrb-p2 1988/udp #cisco RSRB Priority 2 port
-tr-rsrb-p3 1989/tcp #cisco RSRB Priority 3 port
-tr-rsrb-p3 1989/udp #cisco RSRB Priority 3 port
-#PROBLEMS!===================================================
-mshnet 1989/tcp #MHSnet system
-mshnet 1989/udp #MHSnet system
-#PROBLEMS!===================================================
-stun-p1 1990/tcp #cisco STUN Priority 1 port
-stun-p1 1990/udp #cisco STUN Priority 1 port
-stun-p2 1991/tcp #cisco STUN Priority 2 port
-stun-p2 1991/udp #cisco STUN Priority 2 port
-stun-p3 1992/tcp #cisco STUN Priority 3 port
-stun-p3 1992/udp #cisco STUN Priority 3 port
-#PROBLEMS!===================================================
-ipsendmsg 1992/tcp
-ipsendmsg 1992/udp
-#PROBLEMS!===================================================
-snmp-tcp-port 1993/tcp #cisco SNMP TCP port
-snmp-tcp-port 1993/udp #cisco SNMP TCP port
-stun-port 1994/tcp #cisco serial tunnel port
-stun-port 1994/udp #cisco serial tunnel port
-perf-port 1995/tcp #cisco perf port
-perf-port 1995/udp #cisco perf port
-tr-rsrb-port 1996/tcp #cisco Remote SRB port
-tr-rsrb-port 1996/udp #cisco Remote SRB port
-gdp-port 1997/tcp #cisco Gateway Discovery Protocol
-gdp-port 1997/udp #cisco Gateway Discovery Protocol
-x25-svc-port 1998/tcp #cisco X.25 service (XOT)
-x25-svc-port 1998/udp #cisco X.25 service (XOT)
-tcp-id-port 1999/tcp #cisco identification port
-tcp-id-port 1999/udp #cisco identification port
-callbook 2000/tcp
-callbook 2000/udp
-dc 2001/tcp
-wizard 2001/udp #curry
-globe 2002/tcp
-globe 2002/udp
-cfingerd 2003/tcp #GNU finger
-mailbox 2004/tcp
-emce 2004/udp #CCWS mm conf
-berknet 2005/tcp
-oracle 2005/udp
-invokator 2006/tcp
-raid-cc 2006/udp #raid
-dectalk 2007/tcp
-raid-am 2007/udp
-conf 2008/tcp
-terminaldb 2008/udp
-news 2009/tcp
-whosockami 2009/udp
-search 2010/tcp
-pipe_server 2010/udp
-raid-cc 2011/tcp #raid
-servserv 2011/udp
-ttyinfo 2012/tcp
-raid-ac 2012/udp
-raid-am 2013/tcp
-raid-cd 2013/udp
-troff 2014/tcp
-raid-sf 2014/udp
-cypress 2015/tcp
-raid-cs 2015/udp
-bootserver 2016/tcp
-bootserver 2016/udp
-cypress-stat 2017/tcp
-bootclient 2017/udp
-terminaldb 2018/tcp
-rellpack 2018/udp
-whosockami 2019/tcp
-about 2019/udp
-xinupageserver 2020/tcp
-xinupageserver 2020/udp
-servexec 2021/tcp
-xinuexpansion1 2021/udp
-down 2022/tcp
-xinuexpansion2 2022/udp
-xinuexpansion3 2023/tcp
-xinuexpansion3 2023/udp
-xinuexpansion4 2024/tcp
-xinuexpansion4 2024/udp
-ellpack 2025/tcp
-xribs 2025/udp
-scrabble 2026/tcp
-scrabble 2026/udp
-shadowserver 2027/tcp
-shadowserver 2027/udp
-submitserver 2028/tcp
-submitserver 2028/udp
-device2 2030/tcp
-device2 2030/udp
-blackboard 2032/tcp
-blackboard 2032/udp
-glogger 2033/tcp
-glogger 2033/udp
-scoremgr 2034/tcp
-scoremgr 2034/udp
-imsldoc 2035/tcp
-imsldoc 2035/udp
-objectmanager 2038/tcp
-objectmanager 2038/udp
-lam 2040/tcp
-lam 2040/udp
-interbase 2041/tcp
-interbase 2041/udp
-isis 2042/tcp
-isis 2042/udp
-isis-bcast 2043/tcp
-isis-bcast 2043/udp
-rimsl 2044/tcp
-rimsl 2044/udp
-cdfunc 2045/tcp
-cdfunc 2045/udp
-sdfunc 2046/tcp
-sdfunc 2046/udp
-#dls 2047/tcp
-#dls 2047/udp
-dls-monitor 2048/tcp
-dls-monitor 2048/udp
-nfsd 2049/tcp nfs # NFS server daemon
-nfsd 2049/udp nfs # NFS server daemon
-#PROBLEMS!=============================================================
-#shilp 2049/tcp
-#shilp 2049/udp
-#PROBLEMS!=============================================================
-dlsrpn 2065/tcp #Data Link Switch Read Port Number
-dlsrpn 2065/udp #Data Link Switch Read Port Number
-dlswpn 2067/tcp #Data Link Switch Write Port Number
-dlswpn 2067/udp #Data Link Switch Write Port Number
-zephyr-clt 2103/udp #Zephyr serv-hm connection
-zephyr-hm 2104/udp #Zephyr hostmanager
-#PROBLEMS!=============================================================
-#zephyr-hm-srv 2105/udp #Zephyr hm-serv connection
-#PROBLEMS!=============================================================
-eklogin 2105/tcp #Kerberos (v4) encrypted rlogin
-eklogin 2105/udp #Kerberos (v4) encrypted rlogin
-ekshell 2106/tcp #Kerberos (v4) encrypted rshell
-ekshell 2106/udp #Kerberos (v4) encrypted rshell
-rkinit 2108/tcp #Kerberos (v4) remote initialization
-rkinit 2108/udp #Kerberos (v4) remote initialization
-ats 2201/tcp #Advanced Training System Program
-ats 2201/udp #Advanced Training System Program
-ivs-video 2232/tcp #IVS Video default
-ivs-video 2232/udp #IVS Video default
-ivsd 2241/tcp #IVS Daemon
-ivsd 2241/udp #IVS Daemon
-pehelp 2307/tcp
-pehelp 2307/udp
-cvspserver 2401/tcp #CVS network server
-cvspserver 2401/udp #CVS network server
-venus 2430/tcp #venus
-venus 2430/udp #venus
-venus-se 2431/tcp #venus-se
-venus-se 2431/udp #venus-se
-codasrv 2432/tcp #codasrv
-codasrv 2432/udp #codasrv
-codasrv-se 2433/tcp #codasrv-se
-codasrv-se 2433/udp #codasrv-se
-rtsserv 2500/tcp #Resource Tracking system server
-rtsserv 2500/udp #Resource Tracking system server
-rtsclient 2501/tcp #Resource Tracking system client
-rtsclient 2501/udp #Resource Tracking system client
-hp-3000-telnet 2564/tcp #HP 3000 NS/VT block mode telnet
-zebrasrv 2600/tcp #zebra service
-zebra 2601/tcp #zebra vty
-ripd 2602/tcp #RIPd vty
-ripngd 2603/tcp #RIPngd vty
-ospfd 2604/tcp #OSPFd vty
-bgpd 2605/tcp #BGPd vty
-ospf6d 2606/tcp #OSPF6d vty
-dict 2628/tcp #RFC 2229
-dict 2628/udp #RFC 2229
-listen 2766/tcp #System V listener port
-www-dev 2784/tcp #world wide web - development
-www-dev 2784/udp #world wide web - development
-eppc 3031/tcp #Remote AppleEvents/PPC Toolbox
-eppc 3031/udp #Remote AppleEvents/PPC Toolbox
-NSWS 3049/tcp
-NSWS 3049/udp
-gds_db 3050/tcp #InterBase Database Remote Protocol
-gds_db 3050/udp #InterBase Database Remote Protocol
-sj3 3086/tcp #SJ3 (kanji input)
-vmodem 3141/tcp
-vmodem 3141/udp
-ccmail 3264/tcp #cc:mail/lotus
-ccmail 3264/udp #cc:mail/lotus
-dec-notes 3333/tcp #DEC Notes
-dec-notes 3333/udp #DEC Notes
-rdp 3389/tcp #Microsoft Remote Desktop Protocol
-bmap 3421/tcp #Bull Apprise portmapper
-bmap 3421/udp #Bull Apprise portmapper
-prsvp 3455/tcp #RSVP Port
-prsvp 3455/udp rsvp-encap #RSVP Port
-vat 3456/tcp #VAT default data
-vat 3456/udp #VAT default data
-vat-control 3457/tcp #VAT default control
-vat-control 3457/udp #VAT default control
-nut 3493/tcp #Network UPS Tools
-nut 3493/udp #Network UPS Tools
-tsp 3653/tcp #Tunnel Setup Protocol
-tsp 3653/udp #Tunnel Setup Protocol
-svn 3690/tcp #Subversion
-svn 3690/udp #Subversion
-udt_os 3900/tcp #Unidata UDT OS
-udt_os 3900/udp #Unidata UDT OS
-mapper-nodemgr 3984/tcp #MAPPER network node manager
-mapper-nodemgr 3984/udp #MAPPER network node manager
-mapper-mapethd 3985/tcp #MAPPER TCP/IP server
-mapper-mapethd 3985/udp #MAPPER TCP/IP server
-mapper-ws_ethd 3986/tcp #MAPPER workstation server
-mapper-ws_ethd 3986/udp #MAPPER workstation server
-netcheque 4008/tcp #NetCheque accounting
-netcheque 4008/udp #NetCheque accounting
-lockd 4045/udp # NFS lock daemon/manager
-lockd 4045/tcp
-nuts_dem 4132/tcp #NUTS Daemon
-nuts_dem 4132/udp #NUTS Daemon
-nuts_bootp 4133/tcp #NUTS Bootp Server
-nuts_bootp 4133/udp #NUTS Bootp Server
-rwhois 4321/tcp #Remote Who Is
-rwhois 4321/udp #Remote Who Is
-unicall 4343/tcp
-unicall 4343/udp
-krb524 4444/tcp
-krb524 4444/udp
-# PROBLEM krb524 assigned the port,
-# PROBLEM nv used it without an assignment
-nv-video 4444/tcp #NV Video default
-nv-video 4444/udp #NV Video default
-sae-urn 4500/tcp
-sae-urn 4500/udp
-fax 4557/tcp #FAX transmission service
-hylafax 4559/tcp #HylaFAX client-server protocol
-rfa 4672/tcp #remote file access server
-rfa 4672/udp #remote file access server
-commplex-main 5000/tcp
-commplex-main 5000/udp
-commplex-link 5001/tcp
-commplex-link 5001/udp
-rfe 5002/tcp #radio free ethernet
-rfe 5002/udp #radio free ethernet
-telelpathstart 5010/tcp
-telelpathstart 5010/udp
-telelpathattack 5011/tcp
-telelpathattack 5011/udp
-mmcc 5050/tcp #multimedia conference control tool
-mmcc 5050/udp #multimedia conference control tool
-rmonitor_secure 5145/tcp
-rmonitor_secure 5145/udp
-aol 5190/tcp #America-Online
-aol 5190/udp #America-Online
-aol-1 5191/tcp #AmericaOnline1
-aol-1 5191/udp #AmericaOnline1
-aol-2 5192/tcp #AmericaOnline2
-aol-2 5192/udp #AmericaOnline2
-aol-3 5193/tcp #AmericaOnline3
-aol-3 5193/udp #AmericaOnline3
-jabber-client 5222/tcp #Jabber Client Connection
-jabber-client 5222/udp #Jabber Client Connection
-padl2sim 5236/tcp
-padl2sim 5236/udp
-jabber-server 5269/tcp #Jabber Server Connection
-jabber-server 5269/udp #Jabber Server Connection
-hacl-hb 5300/tcp # HA cluster heartbeat
-hacl-hb 5300/udp # HA cluster heartbeat
-hacl-gs 5301/tcp # HA cluster general services
-hacl-gs 5301/udp # HA cluster general services
-hacl-cfg 5302/tcp # HA cluster configuration
-hacl-cfg 5302/udp # HA cluster configuration
-hacl-probe 5303/tcp # HA cluster probing
-hacl-probe 5303/udp # HA cluster probing
-hacl-local 5304/tcp
-hacl-local 5304/udp
-hacl-test 5305/tcp
-hacl-test 5305/udp
-cfengine 5308/tcp
-cfengine 5308/udp
-mdns 5353/tcp #Multicast DNS
-mdns 5353/udp #Multicast DNS
-postgresql 5432/tcp #PostgreSQL Database
-postgresql 5432/udp #PostgreSQL Database
-rplay 5555/udp
-canna 5680/tcp #Canna (Japanese Input)
-proshareaudio 5713/tcp #proshare conf audio
-proshareaudio 5713/udp #proshare conf audio
-prosharevideo 5714/tcp #proshare conf video
-prosharevideo 5714/udp #proshare conf video
-prosharedata 5715/tcp #proshare conf data
-prosharedata 5715/udp #proshare conf data
-prosharerequest 5716/tcp #proshare conf request
-prosharerequest 5716/udp #proshare conf request
-prosharenotify 5717/tcp #proshare conf notify
-prosharenotify 5717/udp #proshare conf notify
-cvsup 5999/tcp #CVSup file transfer/John Polstra/FreeBSD
-x11 6000/tcp #6000-6063 are assigned to X Window System
-x11 6000/udp
-x11-ssh 6010/tcp #Unofficial name, for convenience
-x11-ssh 6010/udp
-softcm 6110/tcp #HP SoftBench CM
-softcm 6110/udp #HP SoftBench CM
-spc 6111/tcp #HP SoftBench Sub-Process Control
-spc 6111/udp #HP SoftBench Sub-Process Control
-meta-corp 6141/tcp #Meta Corporation License Manager
-meta-corp 6141/udp #Meta Corporation License Manager
-aspentec-lm 6142/tcp #Aspen Technology License Manager
-aspentec-lm 6142/udp #Aspen Technology License Manager
-watershed-lm 6143/tcp #Watershed License Manager
-watershed-lm 6143/udp #Watershed License Manager
-statsci1-lm 6144/tcp #StatSci License Manager - 1
-statsci1-lm 6144/udp #StatSci License Manager - 1
-statsci2-lm 6145/tcp #StatSci License Manager - 2
-statsci2-lm 6145/udp #StatSci License Manager - 2
-lonewolf-lm 6146/tcp #Lone Wolf Systems License Manager
-lonewolf-lm 6146/udp #Lone Wolf Systems License Manager
-montage-lm 6147/tcp #Montage License Manager
-montage-lm 6147/udp #Montage License Manager
-ricardo-lm 6148/tcp #Ricardo North America License Manager
-ricardo-lm 6148/udp #Ricardo North America License Manager
-xdsxdm 6558/tcp
-xdsxdm 6558/udp
-ircd 6667/tcp #Internet Relay Chat (unoffical)
-acmsoda 6969/tcp
-acmsoda 6969/udp
-afs3-fileserver 7000/tcp #file server itself
-afs3-fileserver 7000/udp #file server itself
-afs3-callback 7001/tcp #callbacks to cache managers
-afs3-callback 7001/udp #callbacks to cache managers
-afs3-prserver 7002/tcp #users & groups database
-afs3-prserver 7002/udp #users & groups database
-afs3-vlserver 7003/tcp #volume location database
-afs3-vlserver 7003/udp #volume location database
-afs3-kaserver 7004/tcp #AFS/Kerberos authentication service
-afs3-kaserver 7004/udp #AFS/Kerberos authentication service
-afs3-volser 7005/tcp #volume management server
-afs3-volser 7005/udp #volume management server
-afs3-errors 7006/tcp #error interpretation service
-afs3-errors 7006/udp #error interpretation service
-afs3-bos 7007/tcp #basic overseer process
-afs3-bos 7007/udp #basic overseer process
-afs3-update 7008/tcp #server-to-server updater
-afs3-update 7008/udp #server-to-server updater
-afs3-rmtsys 7009/tcp #remote cache manager service
-afs3-rmtsys 7009/udp #remote cache manager service
-afs3-resserver 7010/tcp #MR-AFS residence server
-afs3-resserver 7010/udp #MR-AFS residence server
-ups-onlinet 7010/tcp #onlinet uninterruptable power supplies
-ups-onlinet 7010/udp #onlinet uninterruptable power supplies
-afs3-remio 7011/tcp #MR-AFS remote IO server
-afs3-remio 7011/udp #MR-AFS remote IO server
-font-service 7100/tcp #X Font Service
-font-service 7100/udp #X Font Service
-fodms 7200/tcp #FODMS FLIP
-fodms 7200/udp #FODMS FLIP
-dlip 7201/tcp
-dlip 7201/udp
-ftp-proxy 8021/tcp # FTP proxy
-natd 8668/divert # Network Address Translation
-jetdirect 9100/tcp #HP JetDirect card
-git 9418/tcp # Git Version Control System
-man 9535/tcp
-man 9535/udp
-sd 9876/tcp #Session Director
-sd 9876/udp #Session Director
-amanda 10080/udp #Dump server control
-amandaidx 10082/tcp #Amanda indexing
-amidxtape 10083/tcp #Amanda tape indexing
-isode-dua 17007/tcp
-isode-dua 17007/udp
-biimenu 18000/tcp #Beckman Instruments, Inc.
-biimenu 18000/udp #Beckman Instruments, Inc.
-wnn4 22273/tcp wnn6 #Wnn4 (Japanese input)
-wnn4_Cn 22289/tcp wnn6_Cn #Wnn4 (Chinese input)
-wnn4_Kr 22305/tcp wnn6_Kr #Wnn4 (Korean input)
-wnn4_Tw 22321/tcp wnn6_Tw #Wnn4 (Taiwanse input)
-wnn6_DS 26208/tcp #Wnn6 (Dserver)
-dbbrowse 47557/tcp #Databeam Corporation
-dbbrowse 47557/udp #Databeam Corporation
+++ /dev/null
-root:$1$OJeedGT3$uG0eWkNhkeq0WO6Wldk1Y.:13200:0:99999:7:::
-daemon:!:13200:0:99999:7:::
-bin:!:13200:0:99999:7:::
-sys:!:13200:0:99999:7:::
-sync:!:13200:0:99999:7:::
-mail:!:13200:0:99999:7:::
-proxy:!:13200:0:99999:7:::
-www-data:!:13200:0:99999:7:::
-backup:!:13200:0:99999:7:::
-operator:!:13200:0:99999:7:::
-haldaemon:!:13200:0:99999:7:::
-dbus:!:13200:0:99999:7:::
-ftp:!:13200:0:99999:7:::
-dnsmasq:!:13200:0:99999:7:::
-sshd:!:13200:0:99999:7:::
-nobody:!:13200:0:99999:7:::
-avr32:$1$TVWxUVs7$/ze18sFeD6F26w0hgyB6M.:13200:0:99999:7:::
-default:!:13200:0:99999:7:::
+++ /dev/null
-# /etc/shells: valid login shells
-/bin/ash
-/bin/sh
-/bin/zsh
-/bin/bash
-/usr/bin/zsh
-/usr/bin/bash
-/usr/bin/screen
+++ /dev/null
-# ~/.bash_logout: executed by bash(1) when login shell exits.
-
-# when leaving the console clear the screen to increase privacy
-
-case "`tty`" in
- /dev/tty[0-9]*) clear
-esac
+++ /dev/null
-# .bash_profile
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-umask 022
-
-if [ -f ~/.bashrc ]; then
- source ~/.bashrc
-fi
+++ /dev/null
-# ~/.bashrc: executed by bash(1) for non-login interactive shells.
-
-export PATH=\
-/bin:\
-/sbin:\
-/usr/bin:\
-/usr/sbin:\
-/usr/bin/X11:\
-/usr/local/bin
-
-# If running interactively, then:
-if [ "$PS1" ]; then
-
- if [ "$BASH" ]; then
- export PS1="[\u@\h \W]\\$ "
- else
- if [ "`id -u`" -eq 0 ]; then
- export PS1='# '
- else
- export PS1='$ '
- fi
- fi
-
- export USER=`id -un`
- export LOGNAME=$USER
- export HOSTNAME=`/bin/hostname`
- export HISTSIZE=1000
- export HISTFILESIZE=1000
- export PAGER='/bin/more '
- export EDITOR='/bin/vi'
- export INPUTRC=/etc/inputrc
- export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
- export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
-
- ### Some aliases
- alias ps2='ps facux '
- alias ps1='ps faxo "%U %t %p %a" '
- alias af='ps af'
- alias cls='clear'
- alias ll='/bin/ls --color=tty -laFh'
- alias ls='/bin/ls --color=tty -F'
- alias df='df -h'
- alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
- #alias bc='bc -l'
- alias minicom='minicom -c on'
- alias calc='calc -Cd '
- alias bc='calc -Cd '
-fi;
+++ /dev/null
-#!/bin/sh
-
-
-case $1 in
- deconfig)
- ifconfig $interface 0.0.0.0
- ;;
- bound|renew)
- ifconfig $interface $ip netmask $subnet broadcast $broadcast
- route add default gw $router
- echo -n > /etc/resolv.conf
- [ -z "$domain" ] || echo "domain $domain" >> /etc/resolv.conf
- for n in $dns; do echo "nameserver $n" >> /etc/resolv.conf; done
- if [ ! -z "$hostname" ]; then
- echo $hostname > /etc/hostname
- hostname $hostname
- fi
- ;;
-esac
projects / buildroot.git / commitdiff