commands in order to spot a problem. This kind of troubleshooting is much easier
if the circuit under investigation is encapsulated in a separate module.
-\begin{figure}[b]
-\includegraphics[width=\linewidth,trim=0 0cm 0 0cm]{APPNOTE_011_Design_Investigation/submod_00.pdf} \\ \centerline{\tt memdemo} \vskip1em
-
-\includegraphics[width=\linewidth,trim=0 0cm 0 0cm]{APPNOTE_011_Design_Investigation/submod_01.pdf} \\ \centerline{\tt scramble} \vskip1em
-
-\includegraphics[width=\linewidth,trim=0 0cm 0 0cm]{APPNOTE_011_Design_Investigation/submod_02.pdf} \\ \centerline{\tt outstage} \vskip1em
-
-\includegraphics[width=\linewidth,trim=0 0cm 0 0cm]{APPNOTE_011_Design_Investigation/submod_03.pdf} \\ \centerline{\tt selstage} \vskip1em
+Fig.~\ref{submod} shows how the {\tt submod} command can be used to split the
+circuit from Fig.~\ref{memdemo_src} and \ref{memdemo_00} into its components.
+The {\tt -name} option can is used to specify the name of the new module and
+also the name of the new cell in the current module.
+\begin{figure}[t]
+\includegraphics[width=\linewidth,trim=0 1.3cm 0 0cm]{APPNOTE_011_Design_Investigation/submod_00.pdf} \\ \centerline{\tt memdemo} \vskip1em\par
+\includegraphics[width=\linewidth,trim=0 1.3cm 0 0cm]{APPNOTE_011_Design_Investigation/submod_01.pdf} \\ \centerline{\tt scramble} \vskip1em\par
+\includegraphics[width=\linewidth,trim=0 1.3cm 0 0cm]{APPNOTE_011_Design_Investigation/submod_02.pdf} \\ \centerline{\tt outstage} \vskip1em\par
+\includegraphics[width=\linewidth,trim=0 1.3cm 0 0cm]{APPNOTE_011_Design_Investigation/submod_03.pdf} \\ \centerline{\tt selstage} \vskip1em\par
\begin{lstlisting}[basicstyle=\ttfamily\scriptsize]
select -set outstage y %ci2:+$dff[Q,D] %ci*:-$mux[S]:-$dff
select -set selstage y %ci2:+$dff[Q,D] %ci*:-$dff @outstage %d
\label{submod}
\end{figure}
+\subsection{Evaluation of combinatorial circuits}
+
+The {\tt eval} command can be used to evaluate combinatorial circuits.
+For example (see Fig.~\ref{submod} for the circuit diagram of {\tt selstage}):
+
+{\scriptsize
+\begin{verbatim}
+ yosys [selstage]> eval -set s2,s1 4'b1001 -set d 4'hc -show n2 -show n1
+
+ 9. Executing EVAL pass (evaluate the circuit given an input).
+ Full command line: eval -set s2,s1 4'b1001 -set d 4'hc -show n2 -show n1
+ Eval result: \n2 = 2'10.
+ Eval result: \n1 = 2'10.
+\end{verbatim}
+\par}
+
+So the {\tt -set} option is used to set input values and the {\tt -show} option
+is used to specify the nets to evaluate. If no {\tt -show} option is specified,
+all selected output ports are used per default.
-\FIXME{} --- submod, eval, sat
+If a necessary input value is not given, an error is produced. The option
+{\tt -set-undef} can be used to instead set all unspecified input nets to
+undef ({\tt x}).
+
+The {\tt -table} option can be used to create a truth table. For example:
+
+{\scriptsize
+\begin{verbatim}
+ yosys [selstage]> eval -set-undef -set d[3:1] 0 -table s1,d[0]
+
+ 15. Executing EVAL pass (evaluate the circuit given an input).
+ Full command line: eval -set-undef -set d[3:1] 0 -table s1,d[0]
+
+ \s1 \d [0] | \n1 \n2
+ ---- ------ | ---- ----
+ 2'00 1'0 | 2'00 2'00
+ 2'00 1'1 | 2'xx 2'00
+ 2'01 1'0 | 2'00 2'00
+ 2'01 1'1 | 2'xx 2'01
+ 2'10 1'0 | 2'00 2'00
+ 2'10 1'1 | 2'xx 2'10
+ 2'11 1'0 | 2'00 2'00
+ 2'11 1'1 | 2'xx 2'11
+
+ Assumend undef (x) value for the following singals: \s2
+\end{verbatim}
+}
+
+\subsection{Solving combinatorial SAT problems}
+
+\FIXME
+
+\subsection{Solving sequential SAT problems}
+
+\FIXME
\section{Conclusion}
\label{conclusion}
#!/bin/bash
-../../yosys example.ys
-../../yosys -p 'proc; opt; show -format dot -prefix splice' splice.v
-../../yosys -p 'techmap; abc -liberty ../../techlibs/cmos/cmos_cells.lib;; show -format dot -prefix cmos_00' cmos.v
-../../yosys -p 'techmap; splitnets -ports; abc -liberty ../../techlibs/cmos/cmos_cells.lib;; show -lib ../../techlibs/cmos/cmos_cells.v -format dot -prefix cmos_01' cmos.v
-../../yosys -p 'opt; cd sumprod; select a:sumstuff; show -format dot -prefix sumprod_00' sumprod.v
-../../yosys -p 'opt; cd sumprod; select a:sumstuff %x; show -format dot -prefix sumprod_01' sumprod.v
-../../yosys -p 'opt; cd sumprod; select prod; show -format dot -prefix sumprod_02' sumprod.v
-../../yosys -p 'opt; cd sumprod; select prod %ci; show -format dot -prefix sumprod_03' sumprod.v
-../../yosys -p 'opt; cd sumprod; select prod %ci2; show -format dot -prefix sumprod_04' sumprod.v
-../../yosys -p 'opt; cd sumprod; select prod %ci3; show -format dot -prefix sumprod_05' sumprod.v
-../../yosys -p 'proc; opt; memory; opt; cd memdemo; show -format dot -prefix memdemo_00' memdemo.v
-../../yosys -p 'proc; opt; memory; opt; cd memdemo; show -format dot -prefix memdemo_01 y %ci2:+$dff[Q,D] %ci*:-$mux[S]:-$dff' memdemo.v
-../../yosys submod.ys
-sed -i '/^label=/ d;' example_*.dot splice.dot cmos_*.dot sumprod_*.dot memdemo_*.dot submod_*.dot
-dot -Tpdf -o example_00.pdf example_00.dot
-dot -Tpdf -o example_01.pdf example_01.dot
-dot -Tpdf -o example_02.pdf example_02.dot
-dot -Tpdf -o example_03.pdf example_03.dot
-dot -Tpdf -o splice.pdf splice.dot
-dot -Tpdf -o cmos_00.pdf cmos_00.dot
-dot -Tpdf -o cmos_01.pdf cmos_01.dot
-dot -Tpdf -o sumprod_00.pdf sumprod_00.dot
-dot -Tpdf -o sumprod_01.pdf sumprod_01.dot
-dot -Tpdf -o sumprod_02.pdf sumprod_02.dot
-dot -Tpdf -o sumprod_03.pdf sumprod_03.dot
-dot -Tpdf -o sumprod_04.pdf sumprod_04.dot
-dot -Tpdf -o sumprod_05.pdf sumprod_05.dot
-dot -Tpdf -o memdemo_00.pdf memdemo_00.dot
-dot -Tpdf -o memdemo_01.pdf memdemo_01.dot
-dot -Tpdf -o submod_00.pdf submod_00.dot
-dot -Tpdf -o submod_01.pdf submod_01.dot
-dot -Tpdf -o submod_02.pdf submod_02.dot
-dot -Tpdf -o submod_03.pdf submod_03.dot
+set -ex
+if true; then
+ rm -f *.dot
+ ../../yosys example.ys
+ ../../yosys -p 'proc; opt; show -format dot -prefix splice' splice.v
+ ../../yosys -p 'techmap; abc -liberty ../../techlibs/cmos/cmos_cells.lib;; show -format dot -prefix cmos_00' cmos.v
+ ../../yosys -p 'techmap; splitnets -ports; abc -liberty ../../techlibs/cmos/cmos_cells.lib;; show -lib ../../techlibs/cmos/cmos_cells.v -format dot -prefix cmos_01' cmos.v
+ ../../yosys -p 'opt; cd sumprod; select a:sumstuff; show -format dot -prefix sumprod_00' sumprod.v
+ ../../yosys -p 'opt; cd sumprod; select a:sumstuff %x; show -format dot -prefix sumprod_01' sumprod.v
+ ../../yosys -p 'opt; cd sumprod; select prod; show -format dot -prefix sumprod_02' sumprod.v
+ ../../yosys -p 'opt; cd sumprod; select prod %ci; show -format dot -prefix sumprod_03' sumprod.v
+ ../../yosys -p 'opt; cd sumprod; select prod %ci2; show -format dot -prefix sumprod_04' sumprod.v
+ ../../yosys -p 'opt; cd sumprod; select prod %ci3; show -format dot -prefix sumprod_05' sumprod.v
+ ../../yosys -p 'proc; opt; memory; opt; cd memdemo; show -format dot -prefix memdemo_00' memdemo.v
+ ../../yosys -p 'proc; opt; memory; opt; cd memdemo; show -format dot -prefix memdemo_01 y %ci2:+$dff[Q,D] %ci*:-$mux[S]:-$dff' memdemo.v
+ ../../yosys submod.ys
+ sed -i '/^label=/ d;' *.dot
+fi
+for dot_file in *.dot; do
+ pdf_file=${dot_file#.dot}.pdf
+ dot -Tpdf -o example_00.pdf example_00.dot
+done
for job in APPNOTE_010_Verilog_to_BLIF APPNOTE_011_Design_Investigation
do
[ -f $job.ok -a $job.ok -nt $job.tex ] && continue
+ if [ -f $job/make.sh ]; then
+ cd $job
+ bash make.sh
+ cd ..
+ fi
old_md5=$([ -f $job.aux ] && md5sum < $job.aux || true)
while
pdflatex -shell-escape -halt-on-error $job.tex
projects / yosys.git / commitdiff