Modified Files:

	sparclite.mt tm-sparclite.h

        * config/sparc/sparclite.mt: add sparclite-tdep.o.
        * config/sparc/tm-sparclite.h: add hardware breakpoints support
        defiines and code.

diff --git a/gdb/config/sparc/sparclite.mt b/gdb/config/sparc/sparclite.mt
index 351b331440c7807711ee089be9fd06fe5a7bdce6..f1341884643c12a00b449194272173ce0eaa331e 100644 (file)
--- a/gdb/config/sparc/sparclite.mt
+++ b/gdb/config/sparc/sparclite.mt
@@ -1,3 +1,3 @@
 # Target: Fujitsu SPARClite processor
-TDEPFILES= exec.o sparc-tdep.o sparc-pinsn.o
+TDEPFILES= exec.o sparc-tdep.o sparc-pinsn.o sparclite-tdep.o
 TM_FILE= tm-sparclite.h

diff --git a/gdb/config/sparc/tm-sparclite.h b/gdb/config/sparc/tm-sparclite.h
index f1b4eac7bb413b10cc80e821286d02f64c06f95c..3b2956be24012b88985f067c0258b8f4cc1e73b2 100644 (file)
--- a/gdb/config/sparc/tm-sparclite.h
+++ b/gdb/config/sparc/tm-sparclite.h
@@ -17,4 +17,65 @@ You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
 
+#define TARGET_SPARCLITE 1
+
 #include "sparc/tm-sparc.h"
+
+/* Amount PC must be decremented by after a hardware instruction breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#define DECR_PC_AFTER_HW_BREAK 4
+
+#undef NUM_REGS 
+#define NUM_REGS 80 
+
+#undef REGISTER_BYTES
+#define REGISTER_BYTES (32*4+32*4+8*4+8*4)
+
+#undef REGISTER_NAMES
+#define REGISTER_NAMES  \
+{ "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7",       \
+  "o0", "o1", "o2", "o3", "o4", "o5", "sp", "o7",       \
+  "l0", "l1", "l2", "l3", "l4", "l5", "l6", "l7",       \
+  "i0", "i1", "i2", "i3", "i4", "i5", "fp", "i7",       \
+                                                                \
+  "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",       \
+  "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", \
+  "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",       \
+  "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",       \
+                                                                \
+  "y", "psr", "wim", "tbr", "pc", "npc", "fpsr", "cpsr",        \
+  "dia1", "dia2", "dda1", "dda2", "ddv1", "ddv2", "dcr", "dsr" }
+
+#define DIA1_REGNUM 72          /* debug instr address register 1 */
+#define DIA2_REGNUM 73          /* debug instr address register 2 */
+#define DDA1_REGNUM 74          /* debug data address register 1 */
+#define DDA2_REGNUM 75          /* debug data address register 2 */
+#define DDV1_REGNUM 76          /* debug data value register 1 */
+#define DDV2_REGNUM 77          /* debug data value register 2 */
+#define DCR_REGNUM 78           /* debug control register */
+#define DSR_REGNUM 79           /* debug status regsiter */
+
+#define TARGET_HW_BREAK_LIMIT 2
+#define TARGET_HW_WATCH_LIMIT 2
+
+#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) \
+       sparclite_check_watch_resources (type, cnt, ot)
+
+/* When a hardware watchpoint fires off the PC will be left at the
+   instruction which caused the watchpoint.  It will be necessary for
+   GDB to step over the watchpoint. ***
+
+#define STOPPED_BY_WATCHPOINT(W) \
+  ((W).kind == TARGET_WAITKIND_STOPPED \
+   && (W).value.sig == TARGET_SIGNAL_TRAP \
+   && ((int) read_register (IPSW_REGNUM) & 0x00100000))
+*/
+
+/* Use these macros for watchpoint insertion/deletion.  */
+#define target_insert_watchpoint(addr, len, type) sparclite_insert_watchpoint (addr, len, type)
+#define target_remove_watchpoint(addr, len, type) sparclite_remove_watchpoint (addr, len, type)
+#define target_insert_hw_breakpoint(addr, len) sparclite_insert_hw_breakpoint (addr, len)
+#define target_remove_hw_breakpoint(addr, len) sparclite_remove_hw_breakpoint (addr, len)
+#define target_stopped_data_address() sparclite_stopped_data_address()