[gcc]
2016-07-30 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/rs6000-protos.h (rs6000_adjust_vec_address): New
function that takes a vector memory address, a hard register, an
element number and a temporary base register, and recreates an
address that points to the appropriate element within the vector.
* config/rs6000/rs6000.c (rs6000_adjust_vec_address): Likewise.
(rs6000_split_vec_extract_var): Add support for the target of a
vec_extract with variable element number being a scalar memory
location.
(rtx_is_swappable_p): VLSO insns (UNSPEC_VSX_VSLOW) are not
swappable.
* config/rs6000/vsx.md (vsx_extract_<mode>_load): Replace
vsx_extract_<mode>_load insn with a new insn that optimizes
storing either element to a memory location, using scratch
registers to pick apart the vector and reconstruct the address.
(vsx_extract_<P:mode>_<VSX_D:mode>_load): Likewise.
(vsx_extract_<mode>_store): Rework alternatives to more correctly
support Altivec registers. Add support for ISA 3.0 Altivec d-form
store instruction.
(vsx_extract_<mode>_var): Add support for extracting a variable
element number from memory.
[gcc/testsuite]
2016-07-30 Michael Meissner <meissner@linux.vnet.ibm.com>
* gcc.target/powerpc/vec-extract-2.c: New tests for vec_extract of
vector double or vector long where the vector is in memory.
* gcc.target/powerpc/vec-extract-3.c: Likewise.
* gcc.target/powerpc/vec-extract-4.c: Likewise.
From-SVN: r238908
+2016-07-30 Michael Meissner <meissner@linux.vnet.ibm.com>
+
+ * config/rs6000/rs6000-protos.h (rs6000_adjust_vec_address): New
+ function that takes a vector memory address, a hard register, an
+ element number and a temporary base register, and recreates an
+ address that points to the appropriate element within the vector.
+ * config/rs6000/rs6000.c (rs6000_adjust_vec_address): Likewise.
+ (rs6000_split_vec_extract_var): Add support for the target of a
+ vec_extract with variable element number being a scalar memory
+ location.
+ (rtx_is_swappable_p): VLSO insns (UNSPEC_VSX_VSLOW) are not
+ swappable.
+ * config/rs6000/vsx.md (vsx_extract_<mode>_load): Replace
+ vsx_extract_<mode>_load insn with a new insn that optimizes
+ storing either element to a memory location, using scratch
+ registers to pick apart the vector and reconstruct the address.
+ (vsx_extract_<P:mode>_<VSX_D:mode>_load): Likewise.
+ (vsx_extract_<mode>_store): Rework alternatives to more correctly
+ support Altivec registers. Add support for ISA 3.0 Altivec d-form
+ store instruction.
+ (vsx_extract_<mode>_var): Add support for extracting a variable
+ element number from memory.
+
2016-07-29 Georg-Johann Lay <avr@gjlay.de>
* config/avr/avr.c (avr_out_compare): Use const0_rtx instead of 0
extern void rs6000_expand_vector_set (rtx, rtx, int);
extern void rs6000_expand_vector_extract (rtx, rtx, rtx);
extern void rs6000_split_vec_extract_var (rtx, rtx, rtx, rtx, rtx);
+extern rtx rs6000_adjust_vec_address (rtx, rtx, rtx, rtx, machine_mode);
extern bool altivec_expand_vec_perm_const (rtx op[4]);
extern void altivec_expand_vec_perm_le (rtx op[4]);
extern bool rs6000_expand_vec_perm_const (rtx op[4]);
emit_move_insn (target, adjust_address_nv (mem, inner_mode, 0));
}
+/* Adjust a memory address (MEM) of a vector type to point to a scalar field
+ within the vector (ELEMENT) with a mode (SCALAR_MODE). Use a base register
+ temporary (BASE_TMP) to fixup the address. Return the new memory address
+ that is valid for reads or writes to a given register (SCALAR_REG). */
+
+rtx
+rs6000_adjust_vec_address (rtx scalar_reg,
+ rtx mem,
+ rtx element,
+ rtx base_tmp,
+ machine_mode scalar_mode)
+{
+ unsigned scalar_size = GET_MODE_SIZE (scalar_mode);
+ rtx addr = XEXP (mem, 0);
+ rtx element_offset;
+ rtx new_addr;
+ bool valid_addr_p;
+
+ /* Vector addresses should not have PRE_INC, PRE_DEC, or PRE_MODIFY. */
+ gcc_assert (GET_RTX_CLASS (GET_CODE (addr)) != RTX_AUTOINC);
+
+ /* Calculate what we need to add to the address to get the element
+ address. */
+ if (CONST_INT_P (element))
+ element_offset = GEN_INT (INTVAL (element) * scalar_size);
+ else
+ {
+ int byte_shift = exact_log2 (scalar_size);
+ gcc_assert (byte_shift >= 0);
+
+ if (byte_shift == 0)
+ element_offset = element;
+
+ else
+ {
+ if (TARGET_POWERPC64)
+ emit_insn (gen_ashldi3 (base_tmp, element, GEN_INT (byte_shift)));
+ else
+ emit_insn (gen_ashlsi3 (base_tmp, element, GEN_INT (byte_shift)));
+
+ element_offset = base_tmp;
+ }
+ }
+
+ /* Create the new address pointing to the element within the vector. If we
+ are adding 0, we don't have to change the address. */
+ if (element_offset == const0_rtx)
+ new_addr = addr;
+
+ /* A simple indirect address can be converted into a reg + offset
+ address. */
+ else if (REG_P (addr) || SUBREG_P (addr))
+ new_addr = gen_rtx_PLUS (Pmode, addr, element_offset);
+
+ /* Optimize D-FORM addresses with constant offset with a constant element, to
+ include the element offset in the address directly. */
+ else if (GET_CODE (addr) == PLUS)
+ {
+ rtx op0 = XEXP (addr, 0);
+ rtx op1 = XEXP (addr, 1);
+ rtx insn;
+
+ gcc_assert (REG_P (op0) || SUBREG_P (op0));
+ if (CONST_INT_P (op1) && CONST_INT_P (element_offset))
+ {
+ HOST_WIDE_INT offset = INTVAL (op1) + INTVAL (element_offset);
+ rtx offset_rtx = GEN_INT (offset);
+
+ if (IN_RANGE (offset, -32768, 32767)
+ && (scalar_size < 8 || (offset & 0x3) == 0))
+ new_addr = gen_rtx_PLUS (Pmode, op0, offset_rtx);
+ else
+ {
+ emit_move_insn (base_tmp, offset_rtx);
+ new_addr = gen_rtx_PLUS (Pmode, op0, base_tmp);
+ }
+ }
+ else
+ {
+ if (REG_P (op1) || SUBREG_P (op1))
+ {
+ insn = gen_add3_insn (base_tmp, op1, element_offset);
+ gcc_assert (insn != NULL_RTX);
+ emit_insn (insn);
+ }
+
+ else if (REG_P (element_offset) || SUBREG_P (element_offset))
+ {
+ insn = gen_add3_insn (base_tmp, element_offset, op1);
+ gcc_assert (insn != NULL_RTX);
+ emit_insn (insn);
+ }
+
+ else
+ {
+ emit_move_insn (base_tmp, op1);
+ emit_insn (gen_add2_insn (base_tmp, element_offset));
+ }
+
+ new_addr = gen_rtx_PLUS (Pmode, op0, base_tmp);
+ }
+ }
+
+ else
+ {
+ emit_move_insn (base_tmp, addr);
+ new_addr = gen_rtx_PLUS (Pmode, base_tmp, element_offset);
+ }
+
+ /* If we have a PLUS, we need to see whether the particular register class
+ allows for D-FORM or X-FORM addressing. */
+ if (GET_CODE (new_addr) == PLUS)
+ {
+ rtx op1 = XEXP (new_addr, 1);
+ addr_mask_type addr_mask;
+ int scalar_regno;
+
+ if (REG_P (scalar_reg))
+ scalar_regno = REGNO (scalar_reg);
+ else if (SUBREG_P (scalar_reg))
+ scalar_regno = subreg_regno (scalar_reg);
+ else
+ gcc_unreachable ();
+
+ gcc_assert (scalar_regno < FIRST_PSEUDO_REGISTER);
+ if (INT_REGNO_P (scalar_regno))
+ addr_mask = reg_addr[scalar_mode].addr_mask[RELOAD_REG_GPR];
+
+ else if (FP_REGNO_P (scalar_regno))
+ addr_mask = reg_addr[scalar_mode].addr_mask[RELOAD_REG_FPR];
+
+ else if (ALTIVEC_REGNO_P (scalar_regno))
+ addr_mask = reg_addr[scalar_mode].addr_mask[RELOAD_REG_VMX];
+
+ else
+ gcc_unreachable ();
+
+ if (REG_P (op1) || SUBREG_P (op1))
+ valid_addr_p = (addr_mask & RELOAD_REG_INDEXED) != 0;
+ else
+ valid_addr_p = (addr_mask & RELOAD_REG_OFFSET) != 0;
+ }
+
+ else if (REG_P (new_addr) || SUBREG_P (new_addr))
+ valid_addr_p = true;
+
+ else
+ valid_addr_p = false;
+
+ if (!valid_addr_p)
+ {
+ emit_move_insn (base_tmp, new_addr);
+ new_addr = base_tmp;
+ }
+
+ return change_address (mem, scalar_mode, new_addr);
+}
+
/* Split a variable vec_extract operation into the component instructions. */
void
gcc_assert (byte_shift >= 0);
- if (REG_P (src) || SUBREG_P (src))
+ /* If we are given a memory address, optimize to load just the element. We
+ don't have to adjust the vector element number on little endian
+ systems. */
+ if (MEM_P (src))
+ {
+ gcc_assert (REG_P (tmp_gpr));
+ emit_move_insn (dest, rs6000_adjust_vec_address (dest, src, element,
+ tmp_gpr, scalar_mode));
+ return;
+ }
+
+ else if (REG_P (src) || SUBREG_P (src))
{
int bit_shift = byte_shift + 3;
rtx element2;
case UNSPEC_VSX_CVSPDP:
case UNSPEC_VSX_CVSPDPN:
case UNSPEC_VSX_EXTRACT:
+ case UNSPEC_VSX_VSLO:
return 0;
case UNSPEC_VSPLT_DIRECT:
*special = SH_SPLAT;
}
[(set_attr "type" "veclogical,mftgpr,mftgpr,vecperm")])
-;; Optimize extracting a single scalar element from memory if the scalar is in
-;; the correct location to use a single load.
-(define_insn "*vsx_extract_<mode>_load"
- [(set (match_operand:<VS_scalar> 0 "register_operand" "=d,wv,wr")
- (vec_select:<VS_scalar>
- (match_operand:VSX_D 1 "memory_operand" "m,Z,m")
- (parallel [(const_int 0)])))]
- "VECTOR_MEM_VSX_P (<MODE>mode)"
- "@
- lfd%U1%X1 %0,%1
- lxsd%U1x %x0,%y1
- ld%U1%X1 %0,%1"
- [(set_attr "type" "fpload,fpload,load")
- (set_attr "length" "4")])
+;; Optimize extracting a single scalar element from memory.
+(define_insn_and_split "*vsx_extract_<P:mode>_<VSX_D:mode>_load"
+ [(set (match_operand:<VS_scalar> 0 "register_operand" "=<VSX_D:VS_64reg>,wr")
+ (vec_select:<VSX_D:VS_scalar>
+ (match_operand:VSX_D 1 "memory_operand" "m,m")
+ (parallel [(match_operand:QI 2 "const_0_to_1_operand" "n,n")])))
+ (clobber (match_scratch:P 3 "=&b,&b"))]
+ "VECTOR_MEM_VSX_P (<VSX_D:MODE>mode)"
+ "#"
+ "&& reload_completed"
+ [(set (match_dup 0) (match_dup 4))]
+{
+ operands[4] = rs6000_adjust_vec_address (operands[0], operands[1], operands[2],
+ operands[3], <VSX_D:VS_scalar>mode);
+}
+ [(set_attr "type" "fpload,load")
+ (set_attr "length" "8")])
;; Optimize storing a single scalar element that is the right location to
;; memory
(define_insn "*vsx_extract_<mode>_store"
- [(set (match_operand:<VS_scalar> 0 "memory_operand" "=m,Z,?Z")
+ [(set (match_operand:<VS_scalar> 0 "memory_operand" "=m,Z,o")
(vec_select:<VS_scalar>
- (match_operand:VSX_D 1 "register_operand" "d,wd,<VSa>")
+ (match_operand:VSX_D 1 "register_operand" "d,wv,wb")
(parallel [(match_operand:QI 2 "vsx_scalar_64bit" "wD,wD,wD")])))]
"VECTOR_MEM_VSX_P (<MODE>mode)"
"@
stfd%U0%X0 %1,%0
stxsd%U0x %x1,%y0
- stxsd%U0x %x1,%y0"
+ stxsd %1,%0"
[(set_attr "type" "fpstore")
(set_attr "length" "4")])
;; Variable V2DI/V2DF extract
(define_insn_and_split "vsx_extract_<mode>_var"
- [(set (match_operand:<VS_scalar> 0 "gpc_reg_operand" "=v")
- (unspec:<VS_scalar> [(match_operand:VSX_D 1 "input_operand" "v")
- (match_operand:DI 2 "gpc_reg_operand" "r")]
+ [(set (match_operand:<VS_scalar> 0 "gpc_reg_operand" "=v,<VSa>,r")
+ (unspec:<VS_scalar> [(match_operand:VSX_D 1 "input_operand" "v,m,m")
+ (match_operand:DI 2 "gpc_reg_operand" "r,r,r")]
UNSPEC_VSX_EXTRACT))
- (clobber (match_scratch:DI 3 "=r"))
- (clobber (match_scratch:V2DI 4 "=&v"))]
+ (clobber (match_scratch:DI 3 "=r,&b,&b"))
+ (clobber (match_scratch:V2DI 4 "=&v,X,X"))]
"VECTOR_MEM_VSX_P (<MODE>mode) && TARGET_DIRECT_MOVE_64BIT"
"#"
"&& reload_completed"
+2016-07-30 Michael Meissner <meissner@linux.vnet.ibm.com>
+
+ * gcc.target/powerpc/vec-extract-2.c: New tests for vec_extract of
+ vector double or vector long where the vector is in memory.
+ * gcc.target/powerpc/vec-extract-3.c: Likewise.
+ * gcc.target/powerpc/vec-extract-4.c: Likewise.
+
2016-07-30 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/69867
--- /dev/null
+/* { dg-do compile { target { powerpc*-*-* && lp64 } } } */
+/* { dg-skip-if "" { powerpc*-*-darwin* } { "*" } { "" } } */
+/* { dg-require-effective-target powerpc_vsx_ok } */
+/* { dg-options "-O2 -mvsx" } */
+
+#include <altivec.h>
+
+double
+add_double_0 (vector double *p, double x)
+{
+ return vec_extract (*p, 0) + x;
+}
+
+double
+add_double_1 (vector double *p, double x)
+{
+ return vec_extract (*p, 1) + x;
+}
+
+long
+add_long_0 (vector long *p, long x)
+{
+ return vec_extract (*p, 0) + x;
+}
+
+long
+add_long_1 (vector long *p, long x)
+{
+ return vec_extract (*p, 1) + x;
+}
+
+/* { dg-final { scan-assembler-not "lxvd2x" } } */
+/* { dg-final { scan-assembler-not "lxvw4x" } } */
+/* { dg-final { scan-assembler-not "lxvx" } } */
+/* { dg-final { scan-assembler-not "lxv" } } */
+/* { dg-final { scan-assembler-not "lvx" } } */
+/* { dg-final { scan-assembler-not "xxpermdi" } } */
--- /dev/null
+/* { dg-do compile { target { powerpc*-*-* && lp64 } } } */
+/* { dg-skip-if "" { powerpc*-*-darwin* } { "*" } { "" } } */
+/* { dg-require-effective-target powerpc_p8vector_ok } */
+/* { dg-skip-if "do not override -mcpu" { powerpc*-*-* } { "-mcpu=*" } { "-mcpu=power8" } } */
+/* { dg-options "-O2 -mcpu=power8" } */
+
+#include <altivec.h>
+
+double
+add_double_n (vector double *p, double x, long n)
+{
+ return vec_extract (*p, n) + x;
+}
+
+long
+add_long_n (vector long *p, long x, long n)
+{
+ return vec_extract (*p, n) + x;
+}
+
+/* { dg-final { scan-assembler-not "lxvd2x" } } */
+/* { dg-final { scan-assembler-not "lxvw4x" } } */
+/* { dg-final { scan-assembler-not "lxvx" } } */
+/* { dg-final { scan-assembler-not "lxv" } } */
+/* { dg-final { scan-assembler-not "lvx" } } */
+/* { dg-final { scan-assembler-not "xxpermdi" } } */
--- /dev/null
+/* { dg-do compile { target { powerpc*-*-* && lp64 } } } */
+/* { dg-skip-if "" { powerpc*-*-darwin* } { "*" } { "" } } */
+/* { dg-require-effective-target powerpc_p9vector_ok } */
+/* { dg-skip-if "do not override -mcpu" { powerpc*-*-* } { "-mcpu=*" } { "-mcpu=power9" } } */
+/* { dg-options "-O2 -mcpu=power9" } */
+
+#include <altivec.h>
+
+#ifdef __LITTLE_ENDIAN__
+#define ELEMENT 1
+#else
+#define ELEMENT 0
+#endif
+
+void foo (double *p, vector double v)
+{
+ p[10] = vec_extract (v, ELEMENT);
+}
+
+/* { dg-final { scan-assembler "stxsd " } } */
+/* { dg-final { scan-assembler-not "stxsdx" } } */
+/* { dg-final { scan-assembler-not "stfd" } } */
+/* { dg-final { scan-assembler-not "xxpermdi" } } */
projects / gcc.git / commitdiff