Removed alu and div_mod tests as agreed

diff --git a/tests/ecp5/alu.v b/tests/ecp5/alu.v
deleted file mode 100644 (file)
index f82cc2e..0000000
--- a/tests/ecp5/alu.v
+++ /dev/null
@@ -1,19 +0,0 @@
-module top (
-       input clock,
-       input [31:0] dinA, dinB,
-       input [2:0] opcode,
-       output reg [31:0] dout
-);
-       always @(posedge clock) begin
-               case (opcode)
-               0: dout <= dinA + dinB;
-               1: dout <= dinA - dinB;
-               2: dout <= dinA >> dinB;
-               3: dout <= $signed(dinA) >>> dinB;
-               4: dout <= dinA << dinB;
-               5: dout <= dinA & dinB;
-               6: dout <= dinA | dinB;
-               7: dout <= dinA ^ dinB;
-               endcase
-       end
-endmodule

diff --git a/tests/ecp5/alu.ys b/tests/ecp5/alu.ys
deleted file mode 100644 (file)
index c2950b1..0000000
--- a/tests/ecp5/alu.ys
+++ /dev/null
@@ -1,13 +0,0 @@
-read_verilog alu.v
-hierarchy -top top
-proc
-flatten
-equiv_opt -assert -map +/ecp5/cells_sim.v synth_ecp5 # equivalency check
-design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
-cd top # Constrain all select calls below inside the top module
-select -assert-count 32 t:CCU2C
-select -assert-count 242 t:L6MUX21
-select -assert-count 1127 t:LUT4
-select -assert-count 417 t:PFUMX
-select -assert-count 32 t:TRELLIS_FF
-select -assert-none t:CCU2C t:L6MUX21 t:LUT4 t:PFUMX t:TRELLIS_FF %% t:* %D

diff --git a/tests/ecp5/div_mod.v b/tests/ecp5/div_mod.v
deleted file mode 100644 (file)
index 64a3670..0000000
--- a/tests/ecp5/div_mod.v
+++ /dev/null
@@ -1,13 +0,0 @@
-module top
-(
- input [3:0] x,
- input [3:0] y,
-
- output [3:0] A,
- output [3:0] B
- );
-
-assign A =  x % y;
-assign B =  x / y;
-
-endmodule

diff --git a/tests/ecp5/div_mod.ys b/tests/ecp5/div_mod.ys
deleted file mode 100644 (file)
index 9efb007..0000000
--- a/tests/ecp5/div_mod.ys
+++ /dev/null
@@ -1,12 +0,0 @@
-read_verilog div_mod.v
-hierarchy -top top
-flatten
-equiv_opt -assert -map +/ecp5/cells_sim.v synth_ecp5 # equivalency check
-design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
-cd top # Constrain all select calls below inside the top module
-
-select -assert-count 28 t:CCU2C
-select -assert-count 26 t:L6MUX21
-select -assert-count 138 t:LUT4
-select -assert-count 60 t:PFUMX
-select -assert-none t:LUT4 t:CCU2C t:L6MUX21 t:PFUMX %% t:* %D