static struct serial_ops *serial_ops_list = NULL;
-/* This is the last serial stream opened. Used by connect command. */
-
-static struct serial *last_serial_opened = NULL;
-
-/* Pointer to list of scb's. */
-
-static struct serial *scb_base;
-
/* Non-NULL gives filename which contains a recording of the remote session,
suitable for playback by gdbserver. */
struct serial_ops *ops;
const char *open_name = name;
- for (scb = scb_base; scb; scb = scb->next)
- if (scb->name && strcmp (scb->name, name) == 0)
- {
- scb->refcnt++;
- return scb;
- }
-
if (strcmp (name, "pc") == 0)
ops = serial_interface_lookup ("pc");
else if (strncmp (name, "lpt", 3) == 0)
}
scb->name = xstrdup (name);
- scb->next = scb_base;
- scb->refcnt = 1;
scb->debug_p = 0;
scb->async_state = 0;
scb->async_handler = NULL;
scb->async_context = NULL;
- scb_base = scb;
-
- last_serial_opened = scb;
if (serial_logfile != NULL)
{
return scb;
}
-/* Return the open serial device for FD, if found, or NULL if FD
- is not already opened. */
-
-struct serial *
-serial_for_fd (int fd)
-{
- struct serial *scb;
-
- for (scb = scb_base; scb; scb = scb->next)
- if (scb->fd == fd)
- return scb;
-
- return NULL;
-}
-
/* Open a new serial stream using a file handle, using serial
interface ops OPS. */
{
struct serial *scb;
- scb = serial_for_fd (fd);
- if (scb)
- {
- scb->refcnt++;
- return scb;
- }
-
if (!ops)
{
ops = serial_interface_lookup ("terminal");
scb->error_fd = -1;
scb->name = NULL;
- scb->next = scb_base;
- scb->refcnt = 1;
scb->debug_p = 0;
scb->async_state = 0;
scb->async_handler = NULL;
scb->async_context = NULL;
- scb_base = scb;
if ((ops->fdopen) != NULL)
(*ops->fdopen) (scb, fd);
else
scb->fd = fd;
- last_serial_opened = scb;
-
return scb;
}
{
struct serial *tmp_scb;
- last_serial_opened = NULL;
-
if (serial_logfp)
{
fputs_unfiltered ("\nEnd of log\n", serial_logfp);
serial_logfp = NULL;
}
- scb->refcnt--;
- if (scb->refcnt > 0)
- return;
-
/* ensure that the FD has been taken out of async mode. */
if (scb->async_handler != NULL)
serial_async (scb, NULL, NULL);
if (scb->name)
xfree (scb->name);
- if (scb_base == scb)
- scb_base = scb_base->next;
- else
- for (tmp_scb = scb_base; tmp_scb; tmp_scb = tmp_scb->next)
- {
- if (tmp_scb->next != scb)
- continue;
-
- tmp_scb->next = tmp_scb->next->next;
- break;
- }
-
xfree (scb);
}
return 0;
}
-#if 0
-/* The connect command is #if 0 because I hadn't thought of an elegant
- way to wait for I/O on two `struct serial *'s simultaneously. Two
- solutions came to mind:
-
- 1) Fork, and have have one fork handle the to user direction,
- and have the other hand the to target direction. This
- obviously won't cut it for MSDOS.
-
- 2) Use something like select. This assumes that stdin and
- the target side can both be waited on via the same
- mechanism. This may not be true for DOS, if GDB is
- talking to the target via a TCP socket.
- -grossman, 8 Jun 93 */
-
-/* Connect the user directly to the remote system. This command acts just like
- the 'cu' or 'tip' command. Use <CR>~. or <CR>~^D to break out. */
-
-static struct serial *tty_desc; /* Controlling terminal */
-
-static void
-cleanup_tty (serial_ttystate ttystate)
-{
- printf_unfiltered ("\r\n[Exiting connect mode]\r\n");
- serial_set_tty_state (tty_desc, ttystate);
- xfree (ttystate);
- serial_close (tty_desc);
-}
-
-static void
-connect_command (char *args, int fromtty)
-{
- int c;
- char cur_esc = 0;
- serial_ttystate ttystate;
- struct serial *port_desc; /* TTY port */
-
- dont_repeat ();
-
- if (args)
- fprintf_unfiltered (gdb_stderr,
- "This command takes no args. "
- "They have been ignored.\n");
-
- printf_unfiltered ("[Entering connect mode. Use ~. or ~^D to escape]\n");
-
- tty_desc = serial_fdopen (0);
- port_desc = last_serial_opened;
-
- ttystate = serial_get_tty_state (tty_desc);
-
- serial_raw (tty_desc);
- serial_raw (port_desc);
-
- make_cleanup (cleanup_tty, ttystate);
-
- while (1)
- {
- int mask;
-
- mask = serial_wait_2 (tty_desc, port_desc, -1);
-
- if (mask & 2)
- { /* tty input */
- char cx;
-
- while (1)
- {
- c = serial_readchar (tty_desc, 0);
-
- if (c == SERIAL_TIMEOUT)
- break;
-
- if (c < 0)
- perror_with_name (_("connect"));
-
- cx = c;
- serial_write (port_desc, &cx, 1);
-
- switch (cur_esc)
- {
- case 0:
- if (c == '\r')
- cur_esc = c;
- break;
- case '\r':
- if (c == '~')
- cur_esc = c;
- else
- cur_esc = 0;
- break;
- case '~':
- if (c == '.' || c == '\004')
- return;
- else
- cur_esc = 0;
- }
- }
- }
-
- if (mask & 1)
- { /* Port input */
- char cx;
-
- while (1)
- {
- c = serial_readchar (port_desc, 0);
-
- if (c == SERIAL_TIMEOUT)
- break;
-
- if (c < 0)
- perror_with_name (_("connect"));
-
- cx = c;
-
- serial_write (tty_desc, &cx, 1);
- }
- }
- }
-}
-#endif /* 0 */
-
/* Serial set/show framework. */
static struct cmd_list_element *serial_set_cmdlist;
projects / binutils-gdb.git / commitdiff