* configure.in: Define GENINSRC_NEVER.
* doc/Makefile.am (bfd.info): Remove srcdir prefix.
(MAINTAINERCLEANFILES): Add info file.
(DISTCLEANFILES): Pretend to add info file.
* po/Make-in (.po.gmo): Put gmo files in objdir.
* configure, Makefile.in, doc/Makefile.in: Regenerated.
binutils/
* configure.in: Define GENINSRC_NEVER.
* doc/Makefile.am (MAINTAINERCLEANFILES): Add info file.
(DISTCLEANFILES): Pretend to add info file.
* po/Make-in (.po.gmo): Put gmo files in objdir.
* configure, Makefile.in, doc/Makefile.in: Regenerated.
gas/
* configure.in: Define GENINSRC_NEVER.
* doc/Makefile.am (as.info): Remove srcdir prefix.
(MAINTAINERCLEANFILES): Add info file.
(DISTCLEANFILES): Pretend to add info file.
* po/Make-in (.po.gmo): Put gmo files in objdir.
* configure, Makefile.in, doc/Makefile.in: Regenerated.
gprof/
* configure.in: Define GENINSRC_NEVER.
* doc/Makefile.am (gprof.info): Remove srcdir prefix.
(MAINTAINERCLEANFILES): Add info file.
(DISTCLEANFILES): Pretend to add info file.
* po/Make-in (.po.gmo): Put gmo files in objdir.
* configure, Makefile.in: Regenerated.
ld/
* configure.in: Define GENINSRC_NEVER.
* doc/Makefile.am (ld.info): Remove srcdir prefix.
(MAINTAINERCLEANFILES): Add info file.
(DISTCLEANFILES): Pretend to add info file.
* po/Make-in (.po.gmo): Put gmo files in objdir.
* configure, Makefile.in: Regenerated.
opcodes/
* po/Make-in (.po.gmo): Put gmo files in objdir.
+2006-12-11 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * configure.in: Define GENINSRC_NEVER.
+ * doc/Makefile.am (bfd.info): Remove srcdir prefix.
+ (MAINTAINERCLEANFILES): Add info file.
+ (DISTCLEANFILES): Pretend to add info file.
+ * po/Make-in (.po.gmo): Put gmo files in objdir.
+ * configure, Makefile.in, doc/Makefile.in: Regenerated.
+
2006-12-11 Eric Botcazou <ebotcazou@adacore.com>
* elflink.c (bfd_elf_gc_sections): Also search for corresponding
EXEEXT = @EXEEXT@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
GMSGFMT = @GMSGFMT@
+GREP = @GREP@
HDEFINES = @HDEFINES@
INCINTL = @INCINTL@
INSTALL_DATA = @INSTALL_DATA@
WIN32LDFLAGS = @WIN32LDFLAGS@
WIN32LIBADD = @WIN32LIBADD@
XGETTEXT = @XGETTEXT@
-ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
all_backends = @all_backends@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
+dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
+localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
+psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE AR ac_ct_AR RANLIB ac_ct_RANLIB LN_S LIBTOOL WARN_CFLAGS NO_WERROR MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT INSTALL_LIBBFD_TRUE INSTALL_LIBBFD_FALSE host_noncanonical target_noncanonical bfdlibdir bfdincludedir USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE HDEFINES CPP EGREP BFD_HOST_64BIT_LONG BFD_HOST_LONG_LONG BFD_HOST_64_BIT_DEFINED BFD_HOST_64_BIT BFD_HOST_U_64_BIT CC_FOR_BUILD EXEEXT_FOR_BUILD COREFILE COREFLAG WIN32LDFLAGS WIN32LIBADD TDEFINES wordsize bfd_libs all_backends bfd_backends bfd_machines bfd_default_target_size bfd_file_ptr bfd_ufile_ptr tdefaults datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE AR ac_ct_AR RANLIB ac_ct_RANLIB LN_S LIBTOOL WARN_CFLAGS NO_WERROR MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT GENINSRC_NEVER_TRUE GENINSRC_NEVER_FALSE INSTALL_LIBBFD_TRUE INSTALL_LIBBFD_FALSE host_noncanonical target_noncanonical bfdlibdir bfdincludedir USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE HDEFINES CPP EGREP BFD_HOST_64BIT_LONG BFD_HOST_LONG_LONG BFD_HOST_64_BIT_DEFINED BFD_HOST_64_BIT BFD_HOST_U_64_BIT CC_FOR_BUILD EXEEXT_FOR_BUILD COREFILE COREFLAG WIN32LDFLAGS WIN32LIBADD TDEFINES wordsize bfd_libs all_backends bfd_backends bfd_machines bfd_default_target_size bfd_file_ptr bfd_ufile_ptr tdefaults datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
ac_subst_files=''
# Initialize some variables set by options.
MAINT=$MAINTAINER_MODE_TRUE
+
+
+if false; then
+ GENINSRC_NEVER_TRUE=
+ GENINSRC_NEVER_FALSE='#'
+else
+ GENINSRC_NEVER_TRUE='#'
+ GENINSRC_NEVER_FALSE=
+fi
+
case ${build_alias} in
"") build_noncanonical=${build} ;;
*) build_noncanonical=${build_alias} ;;
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
+if test -z "${GENINSRC_NEVER_TRUE}" && test -z "${GENINSRC_NEVER_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
if test -z "${INSTALL_LIBBFD_TRUE}" && test -z "${INSTALL_LIBBFD_FALSE}"; then
{ { echo "$as_me:$LINENO: error: conditional \"INSTALL_LIBBFD\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
s,@MAINT@,$MAINT,;t t
+s,@GENINSRC_NEVER_TRUE@,$GENINSRC_NEVER_TRUE,;t t
+s,@GENINSRC_NEVER_FALSE@,$GENINSRC_NEVER_FALSE,;t t
s,@INSTALL_LIBBFD_TRUE@,$INSTALL_LIBBFD_TRUE,;t t
s,@INSTALL_LIBBFD_FALSE@,$INSTALL_LIBBFD_FALSE,;t t
s,@host_noncanonical@,$host_noncanonical,;t t
fi
AM_MAINTAINER_MODE
+AM_CONDITIONAL(GENINSRC_NEVER, false)
AM_INSTALL_LIBBFD
AC_EXEEXT
protos: libbfd.h libcoff.h bfd.h
-$(srcdir)/bfd.info bfd.dvi bfd.html: $(DOCFILES) bfdsumm.texi bfd.texinfo
+bfd.info bfd.dvi bfd.html: $(DOCFILES) bfdsumm.texi bfd.texinfo
# We can't replace these rules with an implicit rule, because
# makes without VPATH support couldn't find the .h files in `..'.
fi; \
done
+MAINTAINERCLEANFILES += bfd.info
-
-
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES. It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+if GENINSRC_NEVER
+DISTCLEANFILES += bfd.info
+endif
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES. It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+@GENINSRC_NEVER_TRUE@am__append_1 = bfd.info
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
depcomp =
am__depfiles_maybe =
SOURCES =
-INFO_DEPS = $(srcdir)/bfd.info
+INFO_DEPS = bfd.info
TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
DVIS = bfd.dvi
EXEEXT = @EXEEXT@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
GMSGFMT = @GMSGFMT@
+GREP = @GREP@
HDEFINES = @HDEFINES@
INCINTL = @INCINTL@
INSTALL_DATA = @INSTALL_DATA@
WIN32LDFLAGS = @WIN32LDFLAGS@
WIN32LIBADD = @WIN32LIBADD@
XGETTEXT = @XGETTEXT@
-ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
all_backends = @all_backends@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
+dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
+localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
+psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
noinst_TEXINFOS = bfdint.texi
MOSTLYCLEANFILES = $(MKDOC) *.o
CLEANFILES = *.p *.ip
-DISTCLEANFILES = bfd.?? bfd.??? bfd.h libbfd.h libcoff.h texput.log
-MAINTAINERCLEANFILES = $(DOCFILES)
+DISTCLEANFILES = bfd.?? bfd.??? bfd.h libbfd.h libcoff.h texput.log \
+ $(am__append_1)
+MAINTAINERCLEANFILES = $(DOCFILES) bfd.info
html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
all: all-am
.SUFFIXES:
-.SUFFIXES: .dvi .html .info .pdf .ps .texinfo
+.SUFFIXES: .dvi .ps
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
distclean-libtool:
-rm -f libtool
-.texinfo.info:
+bfd.info: bfd.texinfo
restore=: && backupdir="$(am__leading_dot)am$$$$" && \
- am__cwd=`pwd` && cd $(srcdir) && \
rm -rf $$backupdir && mkdir $$backupdir && \
if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
done; \
else :; fi && \
- cd "$$am__cwd"; \
if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $@ $<; \
+ -o $@ `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo; \
then \
rc=0; \
- cd $(srcdir); \
else \
rc=$$?; \
- cd $(srcdir) && \
$$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
fi; \
rm -rf $$backupdir; exit $$rc
-.texinfo.dvi:
+bfd.dvi: bfd.texinfo
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2DVI) $<
+ $(TEXI2DVI) -o $@ `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo
-.texinfo.pdf:
+bfd.pdf: bfd.texinfo
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2PDF) $<
+ $(TEXI2PDF) -o $@ `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo
-.texinfo.html:
+bfd.html: bfd.texinfo
rm -rf $(@:.html=.htp)
if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $(@:.html=.htp) $<; \
+ -o $(@:.html=.htp) `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo; \
then \
rm -rf $@; \
if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
exit 1; \
fi
-$(srcdir)/bfd.info: bfd.texinfo
-bfd.dvi: bfd.texinfo
-bfd.pdf: bfd.texinfo
-bfd.html: bfd.texinfo
.dvi.ps:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
$(DVIPS) -o $@ $<
protos: libbfd.h libcoff.h bfd.h
-$(srcdir)/bfd.info bfd.dvi bfd.html: $(DOCFILES) bfdsumm.texi bfd.texinfo
+bfd.info bfd.dvi bfd.html: $(DOCFILES) bfdsumm.texi bfd.texinfo
# We can't replace these rules with an implicit rule, because
# makes without VPATH support couldn't find the .h files in `..'.
$(MSGFMT) -o $@ $<
.po.gmo:
- file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
+ file=`echo $* | sed 's,.*/,,'`.gmo \
&& rm -f $$file && $(GMSGFMT) -o $$file $<
.po.cat:
+2006-12-11 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * configure.in: Define GENINSRC_NEVER.
+ * doc/Makefile.am (MAINTAINERCLEANFILES): Add info file.
+ (DISTCLEANFILES): Pretend to add info file.
+ * po/Make-in (.po.gmo): Put gmo files in objdir.
+ * configure, Makefile.in, doc/Makefile.in: Regenerated.
+
2006-12-07 Kazu Hirata <kazu@codesourcery.com>
* readelf.c: Update uses of EF_M68K_*.
EXEEXT = @EXEEXT@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
GMSGFMT = @GMSGFMT@
+GREP = @GREP@
HDEFINES = @HDEFINES@
INCINTL = @INCINTL@
INSTALL_DATA = @INSTALL_DATA@
WARN_CFLAGS = @WARN_CFLAGS@
XGETTEXT = @XGETTEXT@
YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
+YFLAGS = -d
ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
+dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
+localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
+psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
AUTOMAKE_OPTIONS = cygnus dejagnu
SUBDIRS = doc po
tooldir = $(exec_prefix)/$(target_alias)
-YFLAGS = -d
AM_CFLAGS = $(WARN_CFLAGS)
# these two are almost the same program
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S RANLIB ac_ct_RANLIB LIBTOOL WARN_CFLAGS NO_WERROR YACC LEX LEXLIB LEX_OUTPUT_ROOT USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT HDEFINES AR CC_FOR_BUILD EXEEXT_FOR_BUILD DEMANGLER_NAME CPP EGREP ALLOCA NLMCONV_DEFS BUILD_NLMCONV BUILD_SRCONV BUILD_DLLTOOL DLLTOOL_DEFS BUILD_WINDRES BUILD_DLLWRAP BUILD_MISC OBJDUMP_DEFS EMULATION EMULATION_VECTOR datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S RANLIB ac_ct_RANLIB LIBTOOL WARN_CFLAGS NO_WERROR YACC LEX LEXLIB LEX_OUTPUT_ROOT USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT GENINSRC_NEVER_TRUE GENINSRC_NEVER_FALSE HDEFINES AR CC_FOR_BUILD EXEEXT_FOR_BUILD DEMANGLER_NAME CPP EGREP ALLOCA NLMCONV_DEFS BUILD_NLMCONV BUILD_SRCONV BUILD_DLLTOOL DLLTOOL_DEFS BUILD_WINDRES BUILD_DLLWRAP BUILD_MISC OBJDUMP_DEFS EMULATION EMULATION_VECTOR datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
ac_subst_files=''
# Initialize some variables set by options.
+
+if false; then
+ GENINSRC_NEVER_TRUE=
+ GENINSRC_NEVER_FALSE='#'
+else
+ GENINSRC_NEVER_TRUE='#'
+ GENINSRC_NEVER_FALSE=
+fi
+
+
if test -n "$EXEEXT"; then
cat >>confdefs.h <<\_ACEOF
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
+if test -z "${GENINSRC_NEVER_TRUE}" && test -z "${GENINSRC_NEVER_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
s,@MAINT@,$MAINT,;t t
+s,@GENINSRC_NEVER_TRUE@,$GENINSRC_NEVER_TRUE,;t t
+s,@GENINSRC_NEVER_FALSE@,$GENINSRC_NEVER_FALSE,;t t
s,@HDEFINES@,$HDEFINES,;t t
s,@AR@,$AR,;t t
s,@CC_FOR_BUILD@,$CC_FOR_BUILD,;t t
AM_PO_SUBDIRS
AM_MAINTAINER_MODE
+AM_CONDITIONAL(GENINSRC_NEVER, false)
AC_EXEEXT
if test -n "$EXEEXT"; then
AC_DEFINE(HAVE_EXECUTABLE_SUFFIX, 1,
fi; \
done
+MAINTAINERCLEANFILES += binutils.info
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES. It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+if GENINSRC_NEVER
+DISTCLEANFILES = binutils.info
+endif
+
# Maintenance
# We need it for the taz target in ../../Makefile.in.
depcomp =
am__depfiles_maybe =
SOURCES =
-INFO_DEPS = $(srcdir)/binutils.info
+INFO_DEPS = binutils.info
TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
DVIS = binutils.dvi
EXEEXT = @EXEEXT@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
GMSGFMT = @GMSGFMT@
+GREP = @GREP@
HDEFINES = @HDEFINES@
INCINTL = @INCINTL@
INSTALL_DATA = @INSTALL_DATA@
WARN_CFLAGS = @WARN_CFLAGS@
XGETTEXT = @XGETTEXT@
YACC = @YACC@
+YFLAGS = @YFLAGS@
ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
+dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
+localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
+psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
binutils_TEXI = $(srcdir)/binutils.texi
AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty"
TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty"
-MAINTAINERCLEANFILES = config.texi
+MAINTAINERCLEANFILES = config.texi binutils.info
MOSTLYCLEANFILES = $(DEMANGLER_NAME).1
html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES. It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+@GENINSRC_NEVER_TRUE@DISTCLEANFILES = binutils.info
all: all-am
.SUFFIXES:
-.SUFFIXES: .dvi .html .info .pdf .ps .texi
+.SUFFIXES: .dvi .ps
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
distclean-libtool:
-rm -f libtool
-.texi.info:
+binutils.info: binutils.texi $(binutils_TEXINFOS)
restore=: && backupdir="$(am__leading_dot)am$$$$" && \
- am__cwd=`pwd` && cd $(srcdir) && \
rm -rf $$backupdir && mkdir $$backupdir && \
if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
done; \
else :; fi && \
- cd "$$am__cwd"; \
if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $@ $<; \
+ -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
then \
rc=0; \
- cd $(srcdir); \
else \
rc=$$?; \
- cd $(srcdir) && \
$$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
fi; \
rm -rf $$backupdir; exit $$rc
-.texi.dvi:
+binutils.dvi: binutils.texi $(binutils_TEXINFOS)
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2DVI) $<
+ $(TEXI2DVI) -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
-.texi.pdf:
+binutils.pdf: binutils.texi $(binutils_TEXINFOS)
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2PDF) $<
+ $(TEXI2PDF) -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
-.texi.html:
+binutils.html: binutils.texi $(binutils_TEXINFOS)
rm -rf $(@:.html=.htp)
if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $(@:.html=.htp) $<; \
+ -o $(@:.html=.htp) `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
then \
rm -rf $@; \
if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
exit 1; \
fi
-$(srcdir)/binutils.info: binutils.texi $(binutils_TEXINFOS)
-binutils.dvi: binutils.texi $(binutils_TEXINFOS)
-binutils.pdf: binutils.texi $(binutils_TEXINFOS)
-binutils.html: binutils.texi $(binutils_TEXINFOS)
.dvi.ps:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
$(DVIPS) -o $@ $<
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
$(MSGFMT) -o $@ $<
.po.gmo:
- file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
+ file=`echo $* | sed 's,.*/,,'`.gmo \
&& rm -f $$file && $(GMSGFMT) -o $$file $<
.po.cat:
+2006-12-11 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * configure.in: Define GENINSRC_NEVER.
+ * doc/Makefile.am (as.info): Remove srcdir prefix.
+ (MAINTAINERCLEANFILES): Add info file.
+ (DISTCLEANFILES): Pretend to add info file.
+ * po/Make-in (.po.gmo): Put gmo files in objdir.
+ * configure, Makefile.in, doc/Makefile.in: Regenerated.
+
2006-12-09 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.h (template): Use MAX_OPERANDS instead of 4
EXEEXT = @EXEEXT@
GDBINIT = @GDBINIT@
GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
GMSGFMT = @GMSGFMT@
+GREP = @GREP@
INCINTL = @INCINTL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
WARN_CFLAGS = @WARN_CFLAGS@
XGETTEXT = @XGETTEXT@
YACC = `if [ -f ../bison/bison ] ; then echo ../bison/bison -y -L../bison/bison ; else echo @YACC@ ; fi`
+YFLAGS = @YFLAGS@
ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
+dvidir = @dvidir@
exec_prefix = @exec_prefix@
extra_objects = @extra_objects@
host = @host@
install_tooldir = @install_tooldir@
libdir = @libdir@
libexecdir = @libexecdir@
+localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
obj_format = @obj_format@
oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
+psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S RANLIB ac_ct_RANLIB LIBTOOL WARN_CFLAGS NO_WERROR GDBINIT cgen_cpu_prefix extra_objects target_cpu_type obj_format te_file install_tooldir atof OPCODES_LIB YACC LEX LEXLIB LEX_OUTPUT_ROOT USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CPP EGREP ALLOCA LIBM datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S RANLIB ac_ct_RANLIB LIBTOOL WARN_CFLAGS NO_WERROR GDBINIT cgen_cpu_prefix extra_objects target_cpu_type obj_format te_file install_tooldir atof OPCODES_LIB YACC LEX LEXLIB LEX_OUTPUT_ROOT USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT GENINSRC_NEVER_TRUE GENINSRC_NEVER_FALSE CPP EGREP ALLOCA LIBM datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
ac_subst_files=''
# Initialize some variables set by options.
+if false; then
+ GENINSRC_NEVER_TRUE=
+ GENINSRC_NEVER_FALSE='#'
+else
+ GENINSRC_NEVER_TRUE='#'
+ GENINSRC_NEVER_FALSE=
+fi
+
+
+
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
+if test -z "${GENINSRC_NEVER_TRUE}" && test -z "${GENINSRC_NEVER_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
s,@MAINT@,$MAINT,;t t
+s,@GENINSRC_NEVER_TRUE@,$GENINSRC_NEVER_TRUE,;t t
+s,@GENINSRC_NEVER_FALSE@,$GENINSRC_NEVER_FALSE,;t t
s,@CPP@,$CPP,;t t
s,@EGREP@,$EGREP,;t t
s,@ALLOCA@,$ALLOCA,;t t
AM_PO_SUBDIRS
AM_MAINTAINER_MODE
+AM_CONDITIONAL(GENINSRC_NEVER, false)
AC_EXEEXT
AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
eval `grep '^ *VERSION=' $(srcdir)/../../bfd/configure`; \
echo "@set VERSION $$VERSION" > $@
-$(srcdir)/as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
+as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
# We want install to imply install-info as per GNU standards, despite the
# cygnus option.
mv -f $@.T$$$$ $@) || \
(rm -f $@.T$$$$ && exit 1)
rm -f as.pod
+
+MAINTAINERCLEANFILES += as.info
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES. It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+if GENINSRC_NEVER
+DISTCLEANFILES = as.info
+endif
depcomp =
am__depfiles_maybe =
SOURCES =
-INFO_DEPS = $(srcdir)/as.info
+INFO_DEPS = as.info
TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
DVIS = as.dvi
EXEEXT = @EXEEXT@
GDBINIT = @GDBINIT@
GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
GMSGFMT = @GMSGFMT@
+GREP = @GREP@
INCINTL = @INCINTL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
WARN_CFLAGS = @WARN_CFLAGS@
XGETTEXT = @XGETTEXT@
YACC = @YACC@
+YFLAGS = @YFLAGS@
ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
+dvidir = @dvidir@
exec_prefix = @exec_prefix@
extra_objects = @extra_objects@
host = @host@
install_tooldir = @install_tooldir@
libdir = @libdir@
libexecdir = @libexecdir@
+localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
obj_format = @obj_format@
oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
+psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
# This one isn't ready for prime time yet. Not even a little bit.
noinst_TEXINFOS = internals.texi
-MAINTAINERCLEANFILES = asconfig.texi gasver.texi
+MAINTAINERCLEANFILES = asconfig.texi gasver.texi as.info
BASEDIR = $(srcdir)/../..
BFDDIR = $(BASEDIR)/bfd
CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES. It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+@GENINSRC_NEVER_TRUE@DISTCLEANFILES = as.info
all: all-am
.SUFFIXES:
-.SUFFIXES: .dvi .html .info .pdf .ps .texinfo
+.SUFFIXES: .dvi .ps
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
distclean-libtool:
-rm -f libtool
-.texinfo.info:
+as.info: as.texinfo
restore=: && backupdir="$(am__leading_dot)am$$$$" && \
- am__cwd=`pwd` && cd $(srcdir) && \
rm -rf $$backupdir && mkdir $$backupdir && \
if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
done; \
else :; fi && \
- cd "$$am__cwd"; \
if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $@ $<; \
+ -o $@ `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo; \
then \
rc=0; \
- cd $(srcdir); \
else \
rc=$$?; \
- cd $(srcdir) && \
$$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
fi; \
rm -rf $$backupdir; exit $$rc
-.texinfo.dvi:
+as.dvi: as.texinfo
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2DVI) $<
+ $(TEXI2DVI) -o $@ `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo
-.texinfo.pdf:
+as.pdf: as.texinfo
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2PDF) $<
+ $(TEXI2PDF) -o $@ `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo
-.texinfo.html:
+as.html: as.texinfo
rm -rf $(@:.html=.htp)
if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $(@:.html=.htp) $<; \
+ -o $(@:.html=.htp) `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo; \
then \
rm -rf $@; \
if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
exit 1; \
fi
-$(srcdir)/as.info: as.texinfo
-as.dvi: as.texinfo
-as.pdf: as.texinfo
-as.html: as.texinfo
.dvi.ps:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
$(DVIPS) -o $@ $<
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
eval `grep '^ *VERSION=' $(srcdir)/../../bfd/configure`; \
echo "@set VERSION $$VERSION" > $@
-$(srcdir)/as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
+as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
# We want install to imply install-info as per GNU standards, despite the
# cygnus option.
$(MSGFMT) -o $@ $<
.po.gmo:
- file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
+ file=`echo $* | sed 's,.*/,,'`.gmo \
&& rm -f $$file && $(GMSGFMT) -o $$file $<
.po.cat:
+2006-12-11 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * configure.in: Define GENINSRC_NEVER.
+ * doc/Makefile.am (gprof.info): Remove srcdir prefix.
+ (MAINTAINERCLEANFILES): Add info file.
+ (DISTCLEANFILES): Pretend to add info file.
+ * po/Make-in (.po.gmo): Put gmo files in objdir.
+ * configure, Makefile.in: Regenerated.
+
2006-11-27 Nick Clifton <nickc@redhat.com>
* po/ms.po: Updated Malay translation.
info_TEXINFOS = gprof.texi
man_MANS = gprof.1
-$(srcdir)/gprof.info: gprof.texi config.texi
+gprof.info: gprof.texi config.texi
config.texi:
echo "@set top_srcdir $(top_srcdir)" >> ./config.texi
CLEANFILES = dep.sed DEP DEPA DEP1 DEP2
+MAINTAINERCLEANFILES = gprof.info
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES. It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+if GENINSRC_NEVER
+DISTCLEANFILES = gprof.info
+endif
+
# DO NOT DELETE THIS LINE -- mkdep uses it.
# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.
basic_blocks.o: basic_blocks.c $(INCDIR)/libiberty.h \
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(gprof_SOURCES)
-INFO_DEPS = $(srcdir)/gprof.info
+INFO_DEPS = gprof.info
TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
DVIS = gprof.dvi
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
GMSGFMT = @GMSGFMT@
+GREP = @GREP@
INCINTL = @INCINTL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
WARN_CFLAGS = @WARN_CFLAGS@
XGETTEXT = @XGETTEXT@
ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
+dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
+localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
+psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
man_MANS = gprof.1
html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
CLEANFILES = dep.sed DEP DEPA DEP1 DEP2
+MAINTAINERCLEANFILES = gprof.info
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES. It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+@GENINSRC_NEVER_TRUE@DISTCLEANFILES = gprof.info
all: $(BUILT_SOURCES) gconfig.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
-.SUFFIXES: .m .c .dvi .html .info .lo .o .obj .pdf .ps .texi
+.SUFFIXES: .m .c .dvi .lo .o .obj .ps
am--refresh:
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
distclean-libtool:
-rm -f libtool
-.texi.info:
- restore=: && backupdir="$(am__leading_dot)am$$$$" && \
- am__cwd=`pwd` && cd $(srcdir) && \
- rm -rf $$backupdir && mkdir $$backupdir && \
- if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
- for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
- if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
- done; \
- else :; fi && \
- cd "$$am__cwd"; \
- if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $@ $<; \
- then \
- rc=0; \
- cd $(srcdir); \
- else \
- rc=$$?; \
- cd $(srcdir) && \
- $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
- fi; \
- rm -rf $$backupdir; exit $$rc
-
-.texi.dvi:
+gprof.dvi: gprof.texi
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2DVI) $<
+ $(TEXI2DVI) -o $@ `test -f 'gprof.texi' || echo '$(srcdir)/'`gprof.texi
-.texi.pdf:
+gprof.pdf: gprof.texi
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2PDF) $<
+ $(TEXI2PDF) -o $@ `test -f 'gprof.texi' || echo '$(srcdir)/'`gprof.texi
-.texi.html:
+gprof.html: gprof.texi
rm -rf $(@:.html=.htp)
if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $(@:.html=.htp) $<; \
+ -o $(@:.html=.htp) `test -f 'gprof.texi' || echo '$(srcdir)/'`gprof.texi; \
then \
rm -rf $@; \
if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
exit 1; \
fi
-gprof.dvi: gprof.texi
-gprof.pdf: gprof.texi
-gprof.html: gprof.texi
.dvi.ps:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
$(DVIPS) -o $@ $<
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive
clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
for f in $(POTFILES); do echo $$f; done | LC_COLLATE= sort > tmp \
&& mv tmp $(srcdir)/po/POTFILES.in
-$(srcdir)/gprof.info: gprof.texi config.texi
+gprof.info: gprof.texi config.texi
config.texi:
echo "@set top_srcdir $(top_srcdir)" >> ./config.texi
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S RANLIB ac_ct_RANLIB LIBTOOL USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CPP EGREP WARN_CFLAGS NO_WERROR datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S RANLIB ac_ct_RANLIB LIBTOOL USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT GENINSRC_NEVER_TRUE GENINSRC_NEVER_FALSE CPP EGREP WARN_CFLAGS NO_WERROR datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
ac_subst_files=''
# Initialize some variables set by options.
+if false; then
+ GENINSRC_NEVER_TRUE=
+ GENINSRC_NEVER_FALSE='#'
+else
+ GENINSRC_NEVER_TRUE='#'
+ GENINSRC_NEVER_FALSE=
+fi
+
+
+
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
+if test -z "${GENINSRC_NEVER_TRUE}" && test -z "${GENINSRC_NEVER_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
s,@MAINT@,$MAINT,;t t
+s,@GENINSRC_NEVER_TRUE@,$GENINSRC_NEVER_TRUE,;t t
+s,@GENINSRC_NEVER_FALSE@,$GENINSRC_NEVER_FALSE,;t t
s,@CPP@,$CPP,;t t
s,@EGREP@,$EGREP,;t t
s,@WARN_CFLAGS@,$WARN_CFLAGS,;t t
AM_PO_SUBDIRS
AM_MAINTAINER_MODE
+AM_CONDITIONAL(GENINSRC_NEVER, false)
AC_EXEEXT
AC_CHECK_HEADERS(sys/gmon_out.h)
$(MSGFMT) -o $@ $<
.po.gmo:
- file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
+ file=`echo $* | sed 's,.*/,,'`.gmo \
&& rm -f $$file && $(GMSGFMT) -o $$file $<
.po.cat:
+2006-12-11 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * configure.in: Define GENINSRC_NEVER.
+ * doc/Makefile.am (ld.info): Remove srcdir prefix.
+ (MAINTAINERCLEANFILES): Add info file.
+ (DISTCLEANFILES): Pretend to add info file.
+ * po/Make-in (.po.gmo): Put gmo files in objdir.
+ * configure, Makefile.in: Regenerated.
+
2006-12-04 Jan Beulich <jbeulich@novell.com>
* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Create
eval `grep '^ *VERSION=' $(srcdir)/../bfd/configure`; \
echo "@set VERSION $$VERSION" > $@
-$(srcdir)/ld.info ld.dvi ld.html: $(srcdir)/ld.texinfo configdoc.texi ldver.texi
+ld.info ld.dvi ld.html: $(srcdir)/ld.texinfo configdoc.texi ldver.texi
# Build the man page from the texinfo file
# The sed command removes the no-adjust Nroff command so that
distclean-local:
rm -rf ldscripts
+MAINTAINERCLEANFILES += ld.info
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES. It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+if GENINSRC_NEVER
+DISTCLEANFILES += ld.info
+endif
+
# Targets to rebuild dependencies in this Makefile.
# Have to get rid of DEP1 here so that "$?" later includes all of $(CFILES).
DEP: dep.sed $(CFILES) $(HFILES) $(GENERATED_CFILES) $(GENERATED_HFILES) config.h
host_triplet = @host@
target_triplet = @target@
noinst_PROGRAMS = ld-new$(EXEEXT)
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES. It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+@GENINSRC_NEVER_TRUE@am__append_1 = ld.info
DIST_COMMON = $(srcdir)/../config.guess $(srcdir)/../config.sub NEWS \
README ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
$(top_srcdir)/configure $(am__configure_deps) \
$(AM_YFLAGS)
YLWRAP = $(top_srcdir)/../ylwrap
SOURCES = $(ld_new_SOURCES) $(EXTRA_ld_new_SOURCES)
-INFO_DEPS = $(srcdir)/ld.info
+INFO_DEPS = ld.info
TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
DVIS = ld.dvi
EMUL_EXTRA_OFILES = @EMUL_EXTRA_OFILES@
EXEEXT = @EXEEXT@
GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
GMSGFMT = @GMSGFMT@
+GREP = @GREP@
HDEFINES = @HDEFINES@
#stuff for self hosting (can be overridden in config file).
WARN_CFLAGS = @WARN_CFLAGS@
XGETTEXT = @XGETTEXT@
YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
+YFLAGS = -d
ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
+dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
+localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
+psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
AUTOMAKE_OPTIONS = cygnus dejagnu
SUBDIRS = po
tooldir = $(exec_prefix)/$(target_alias)
-YFLAGS = -d
AM_CFLAGS = $(WARN_CFLAGS)
# We put the scripts in the directory $(scriptdir)/ldscripts.
ld_new_DEPENDENCIES = $(EMULATION_OFILES) $(EMUL_EXTRA_OFILES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL_DEP)
ld_new_LDADD = $(EMULATION_OFILES) $(EMUL_EXTRA_OFILES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
-MAINTAINERCLEANFILES = ldver.texi configdoc.texi
+MAINTAINERCLEANFILES = ldver.texi configdoc.texi ld.info
# We want to reconfigure if configure.host or configure.tgt changes. We
# extract version from bfd/configure.in, so we must depend on that also.
# Stuff that should be included in a distribution. The diststuff
# target is run by the taz target in ../Makefile.in.
EXTRA_DIST = ldgram.c ldgram.h ldlex.c emultempl/spu_ovl.o $(man_MANS)
-DISTCLEANFILES = tdirs site.exp site.bak stringify.sed
+DISTCLEANFILES = tdirs site.exp site.bak stringify.sed $(am__append_1)
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
-.SUFFIXES: .c .dvi .html .info .l .lo .o .obj .pdf .ps .texinfo .y
+.SUFFIXES: .c .dvi .l .lo .o .obj .ps .y
am--refresh:
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
distclean-libtool:
-rm -f libtool
-.texinfo.info:
+ld.info: ld.texinfo
restore=: && backupdir="$(am__leading_dot)am$$$$" && \
- am__cwd=`pwd` && cd $(srcdir) && \
rm -rf $$backupdir && mkdir $$backupdir && \
if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
done; \
else :; fi && \
- cd "$$am__cwd"; \
if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $@ $<; \
+ -o $@ `test -f 'ld.texinfo' || echo '$(srcdir)/'`ld.texinfo; \
then \
rc=0; \
- cd $(srcdir); \
else \
rc=$$?; \
- cd $(srcdir) && \
$$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
fi; \
rm -rf $$backupdir; exit $$rc
-.texinfo.dvi:
+ld.dvi: ld.texinfo
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2DVI) $<
+ $(TEXI2DVI) -o $@ `test -f 'ld.texinfo' || echo '$(srcdir)/'`ld.texinfo
-.texinfo.pdf:
+ld.pdf: ld.texinfo
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2PDF) $<
+ $(TEXI2PDF) -o $@ `test -f 'ld.texinfo' || echo '$(srcdir)/'`ld.texinfo
-.texinfo.html:
+ld.html: ld.texinfo
rm -rf $(@:.html=.htp)
if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $(@:.html=.htp) $<; \
+ -o $(@:.html=.htp) `test -f 'ld.texinfo' || echo '$(srcdir)/'`ld.texinfo; \
then \
rm -rf $@; \
if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
exit 1; \
fi
-$(srcdir)/ld.info: ld.texinfo
-ld.dvi: ld.texinfo
-ld.pdf: ld.texinfo
-ld.html: ld.texinfo
.dvi.ps:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
$(DVIPS) -o $@ $<
eval `grep '^ *VERSION=' $(srcdir)/../bfd/configure`; \
echo "@set VERSION $$VERSION" > $@
-$(srcdir)/ld.info ld.dvi ld.html: $(srcdir)/ld.texinfo configdoc.texi ldver.texi
+ld.info ld.dvi ld.html: $(srcdir)/ld.texinfo configdoc.texi ldver.texi
# Build the man page from the texinfo file
# The sed command removes the no-adjust Nroff command so that
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S RANLIB ac_ct_RANLIB LIBTOOL use_sysroot TARGET_SYSTEM_ROOT TARGET_SYSTEM_ROOT_DEFINE WARN_CFLAGS NO_WERROR USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE YACC LEX LEXLIB LEX_OUTPUT_ROOT MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT HDEFINES HOSTING_CRT0 HOSTING_LIBS NATIVE_LIB_DIRS CPP EGREP STRINGIFY EMUL EMULATION_OFILES EMUL_EXTRA_OFILES LIB_PATH EMULATION_LIBPATH TESTBFDLIB datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S RANLIB ac_ct_RANLIB LIBTOOL use_sysroot TARGET_SYSTEM_ROOT TARGET_SYSTEM_ROOT_DEFINE WARN_CFLAGS NO_WERROR USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE YACC LEX LEXLIB LEX_OUTPUT_ROOT MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT GENINSRC_NEVER_TRUE GENINSRC_NEVER_FALSE HDEFINES HOSTING_CRT0 HOSTING_LIBS NATIVE_LIB_DIRS CPP EGREP STRINGIFY EMUL EMULATION_OFILES EMUL_EXTRA_OFILES LIB_PATH EMULATION_LIBPATH TESTBFDLIB datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
ac_subst_files='TDIRS'
# Initialize some variables set by options.
+
+if false; then
+ GENINSRC_NEVER_TRUE=
+ GENINSRC_NEVER_FALSE='#'
+else
+ GENINSRC_NEVER_TRUE='#'
+ GENINSRC_NEVER_FALSE=
+fi
+
+
. ${srcdir}/configure.host
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
+if test -z "${GENINSRC_NEVER_TRUE}" && test -z "${GENINSRC_NEVER_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
s,@MAINT@,$MAINT,;t t
+s,@GENINSRC_NEVER_TRUE@,$GENINSRC_NEVER_TRUE,;t t
+s,@GENINSRC_NEVER_FALSE@,$GENINSRC_NEVER_FALSE,;t t
s,@HDEFINES@,$HDEFINES,;t t
s,@HOSTING_CRT0@,$HOSTING_CRT0,;t t
s,@HOSTING_LIBS@,$HOSTING_LIBS,;t t
AM_PROG_LEX
AM_MAINTAINER_MODE
+AM_CONDITIONAL(GENINSRC_NEVER, false)
. ${srcdir}/configure.host
$(MSGFMT) -o $@ $<
.po.gmo:
- file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
+ file=`echo $* | sed 's,.*/,,'`.gmo \
&& rm -f $$file && $(GMSGFMT) -o $$file $<
.po.cat:
+2006-12-11 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * po/Make-in (.po.gmo): Put gmo files in objdir.
+
2006-12-09 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (X86_64_1): New.
$(MSGFMT) -o $@ $<
.po.gmo:
- file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
+ file=`echo $* | sed 's,.*/,,'`.gmo \
&& rm -f $$file && $(GMSGFMT) -o $$file $<
.po.cat:
projects / binutils-gdb.git / commitdiff