+++ /dev/null
-2001-06-23 Andrew Cagney <ac131313@redhat.com>
-
- * mi-disassemble.exp: Update patterns matching data-disassemble
- output. Now produces a list of instructions and a list of
- source/assembly lines.
-
-2001-06-18 Andrew Cagney <ac131313@redhat.com>
-
- * mi-basics.exp, mi-break.exp, mi-console.exp, mi-disassemble.exp,
- mi-eval.exp, mi-hack-cli.exp, mi-read-memory.exp, mi-regs.exp,
- mi-return.exp, mi-simplerun.exp, mi-stack.exp, mi-stepi.exp,
- mi-until.exp, mi-var-block.exp, mi-var-child.exp, mi-var-cmd.exp,
- mi-var-display.exp, mi-watch.exp, mi0-basics.exp, mi0-break.exp,
- mi0-console.exp, mi0-disassemble.exp, mi0-eval.exp,
- mi0-hack-cli.exp, mi0-read-memory.exp, mi0-regs.exp,
- mi0-return.exp, mi0-simplerun.exp, mi0-stack.exp, mi0-stepi.exp,
- mi0-until.exp, mi0-var-block.exp, mi0-var-child.exp,
- mi0-var-cmd.exp, mi0-var-display.exp, mi0-watch.exp: Use MIFLAGS
- to explictly select an interpreter.
-
-2001-06-16 Andrew Cagney <ac131313@redhat.com>
-
- MI0 was the never enabled MI interface included in GDB 5.0.
- * mi0-basics.exp: Copy mi-basics.exp.
- * mi0-break.exp: Copy mi-break.exp.
- * mi0-console.exp: Copy mi-console.exp.
- * mi0-disassemble.exp: Copy mi-disassemble.exp.
- * mi0-eval.exp: Copy mi-eval.exp.
- * mi0-hack-cli.exp: Copy mi-hack-cli.exp.
- * mi0-read-memory.exp: Copy mi-read-memory.exp.
- * mi0-regs.exp: Copy mi-regs.exp.
- * mi0-return.exp: Copy mi-return.exp.
- * mi0-simplerun.exp: Copy mi-simplerun.exp.
- * mi0-stack.exp: Copy mi-stack.exp.
- * mi0-stepi.exp: Copy mi-stepi.exp.
- * mi0-until.exp: Copy mi-until.exp.
- * mi0-var-block.exp: Copy mi-var-block.exp.
- * mi0-var-child.exp: Copy mi-var-child.exp.
- * mi0-var-cmd.exp: Copy mi-var-cmd.exp.
- * mi0-var-display.exp: Copy mi-var-display.exp.
- * mi0-watch.exp: Copy mi-watch.exp.
-
-2001-05-11 Fernando Nasser <fnasser@redhat.com>
-
- * mi-var-child.exp: Adjust for the fact that now (char *) can be
- dereferenced.
-
-2001-03-06 Kevin Buettner <kevinb@redhat.com>
-
- * mi-basics.exp, mi-break.exp, mi-disassemble.exp,
- mi-eval.exp, mi-hack-cli.exp, mi-read-memory.exp, mi-regs.exp,
- mi-return.exp, mi-simplerun.exp, mi-stack.exp, mi-stepi.exp,
- mi-until.exp, mi-watch.exp: Update/correct copyright notices.
-
-2001-01-20 Mark Kettenis <kettenis@gnu.org>
-
- * mi-support.exp (mi_gdb_start): Skip mi tests if -i flag is
- recognized (i.e. if GDB was compiled with UI_OUT, but the mi
- interpreter wasn't recognized (because it wasn't compiled in).
-
-Tue Apr 18 15:36:07 2000 Andrew Cagney <cagney@b1.cygnus.com>
-
- * Makefile.in (clean mostlyclean): Do not delete $(MISCELLANEOUS).
-
-Tue Mar 14 15:54:57 2000 Andrew Cagney <cagney@b1.cygnus.com>
-
- * basics.c: Add EMACS local variable pointing change-log at this
- file.
- * Makefile.in: Ditto
-
-2000-03-13 James Ingham <jingham@leda.cygnus.com>
-
- * mi-var-block.exp: The error report from varobj_create changed
- since I am now trapping parse_exp_1 errors. Change the tests to
- match the new error message.
- * mi-var-child.exp: Ditto.
- * mi-var-cmd.exp: Ditto.
-
-2000-03-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * mi-disassemble.exp: Don't assume numbers for the offset
- values. They can be different depending on the architecture.
-
- * mi-watch.exp (test_watchpoint_triggering): In same cases the
- type can be 'hw wathcpoint' not just 'watchpoint'. Adjust for that.
-
- * basics.c (callee4): Make the function return something,
- otherwise the return value is undefined.
-
-2000-03-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * mi-basics.exp: Comment out test for a still unimplemented operation.
-
- * mi-disassemble.exp: Rewrite most of the tests to conform to new
- disassemble interface.
-
-Sat Mar 4 13:55:08 2000 Andrew Cagney <cagney@b1.cygnus.com>
-
- From Fri 3 Mar 2000 Peter Schauer:
- * mi-support.exp (mi_gdb_start): When GDB doesn't recongize -i=mi
- option, assume no MI support present.
-
-2000-02-01 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * mi-support.exp (mi_gdb_start): Update to recognize start up
- message with 'UI_OUT' instead of 'HEADLESS'.
-
-2000-01-27 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * mi-regs.exp (test_running_the_program): Add global var 'hex'.
-
- * mi-stack.exp, mi-stepi.exp, mi-until.exp, mi-watch.exp,
- mi-var-display.exp, mi-var-cmd.exp, mi-var-child.exp,
- mi-var-block.exp: Update all stopped messages.
-
-2000-01-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * mi-console.exp, mi-disassemble.exp, mi-eval.exp,
- mi-read-memory.exp, mi-regs.exp, mi-return.exp, mi-simplerun.exp:
- Update stopped messages, update copyright.
-
- * mi-disassemble.exp: Update error messages output.
-
- * mi-support.exp (proc mi_step): Make gdb do a 'step' command, not
- a 'next'. Update stopped message.
- (proc mi_next): Update stop message.
- (proc mi_run_to_main): Update stopped message.
- Update copyright.
-
-2000-01-11 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * mi-simplerun.exp: Remove stack frames tests from here, to:
-
- * mi-stack.exp: New file, tests for stack commands.
-
- * mi-support.exp (mi_run_to_main, mi_next, mi_step) : Update to
- include thread-id in stopped message.
-
- * mi-regs.exp: Update break-insert output.
-
- * (mi-console.exp, mi-disassemble.exp, mi-eval.exp,
- mi-read-memory.exp, mi-regs.exp, mi-return.exp, mi-simplerun.exp,
- mi-stepi.exp, mi-until.exp, mi-var-block.exp, mi-var-child.exp,
- mi-var-cmd.exp, mi-var-display.exp, mi-watch.exp): Update stopped
- message to include thread-id.
-
-Wed Dec 29 22:06:05 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mi-watch.exp, mi-var-display.exp, mi-var-cmd.exp,
- mi-var-child.exp, mi-var-block.exp, mi-until.exp, mi-stepi.exp,
- mi-simplerun.exp, mi-return.exp, mi-support.exp, mi-eval.exp,
- mi-console.exp, mi-disassemble.exp, mi-break.exp: Update to
- reflect extended output from -break-insert command.
-
- * mi-break.exp (test_rbreak_creation_and_listing): XFAIL regexp
- tests. -r flag broken by above.
-
-Sun Dec 19 19:28:13 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * cpp_variable.cc, cpp_variable.h, c_variable.c: Delete.
-
-Fri Dec 17 20:59:55 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mi-read-memory.exp: Test of ``-o <offset>'' now works.
-
-1999-12-16 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * mi-var-cmd.exp: Fix 2 tests outputs.
-
- * mi-var-child.exp: Add many more tests.
-
- * mi-var-display.exp: Add many more tests.
-
- * var-cmd.c: Change type of incr_a parameter to char.
-
-1999-12-15 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * mi-var-block.exp: Set up xfails fro known problems.
-
- * mi-var-display.exp: Set up printing of values of 'e' and 'anone'
- as xfails.
-
- * mi-var-child.exp: Fix typos.
-
-1999-12-15 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mi-var-child.exp: Space was missing before ``[10]''.
-
-Wed Dec 15 19:23:38 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mi-read-memory.exp: Add test for ``-o <offset>''. Update checks
- and match next-row et.al.
-
-1999-12-14 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * mi-var-display.exp : New file. Tests for format and type, with
- unions, structs and enums.
-
- * mi-var-cmd.exp: Add some var-assign tests.
-
-1999-12-14 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * mi-var-cmd.exp, mi-var-block.exp, mi-var-child.exp: New files
- some tests for -var* commands.
-
- * var-cmd.c: New source file for var-* commands tests.
- * gdb.mi/Makefile.in (PROGS): Add var-cmd.
-
-Mon Dec 13 18:06:09 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mi-break.exp: Fix quoting. Changed "srcfile.c":6 to
- "\"srcfile.c\":6".
- * mi-simplerun.exp: Fix quoting.
-
-Sat Dec 11 21:33:37 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mi-simplerun.exp (exec-finish): Fix return value was zero,
- should have been three.
-
- * mi-disassemble.exp: Reduce number of wild card matches in
- * patterns. Remove all numeric constants.
-
-1999-12-09 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * mi-eval.exp: New file. Some initial tests for
- -data-evaluate-expression.
-
-1999-12-09 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * c_variable.c, cpp_variable.cc, cpp_variable.h: New files. Used
- for testing "var" operations.
- * Makefile.in: Add reference to the above files.
-
-1999-12-08 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * mi-regs.exp: Fix test for format 'N' for
- data-list-register-values.
-
-1999-12-07 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * mi-disassemble.exp: Update expected output. Break test of
- disassembly in mixed mode into 2 functions.
-
- * mi-regs.exp: Initial register tests. Works only on sparc right
- now.
-
-1999-12-02 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * mi-stepi.exp: New file. Tests exec-step-instruction and
- exec-next-instruction.
- * mi-until.exp: New file. Tests exec-until.
- * until.c: New file.
- * mi-return.exp: New file. Tests exec-return.
-
-Thu Dec 2 09:38:23 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mi-hack-cli.exp: New test. Check the hacked up access to the
- CLI.
-
-Wed Dec 1 16:47:40 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mi-basics.exp: Delete calls to mi_delete_breakpoints,
- mi_gdb_reinitialize_dir and mi_gdb_load. This test is checking
- that these can work.
-
- * mi-support.exp (mi_step, mi_next, mi_run_to_main): New
- procedures.
-
- * mi-read-memory.exp, mi-read-memory.c: New files. Test
- data-read-memory command.
-
-Tue Nov 30 23:54:16 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mi-support.exp: Don't start SID until after GDB has been started
- and verified.
-
-Tue Nov 30 22:21:33 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mi-support.exp (mi_uncatched_gdb_exit): When SID, call sid_exit.
- (mi_gdb_start): When SID, call sid_start.
- (mi_gdb_start): Add MIFLAGS to spawn-GDB command. Check for
- HEADLESS gdb. Return non-zero when GDB fails to start.
- (mi_gdb_load): When SID or SIM, download program.
- (mi_run_cmd): Don't do download here. Assume target supports the
- 00-exec-run command.
- (skip_mi_tests, setup_gdbmi, unset_gdbmi): Delete. Merged into
- mi_gdb_start.
-
- * mi-basics.exp, mi-break.exp, mi-console.exp, mi-disassemble.exp,
- mi-simplerun.exp, mi-watch.exp: Update. Check status from
- mi_gdb_start indicating that GDB started correctly.
-
-Tue Nov 30 15:22:08 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mi-support.exp (setup_gdbmi, unset_gdbmi): New
- procedures. Setup/unset dejagnu for mi tests.
- * mi-basics.exp, mi-console.exp, mi-simplerun.exp, mi-break.exp,
- mi-disassemble.exp, mi-watch.exp: Update.
-
-1999-11-29 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * mi-simplerun.exp (test_running_the_program): Remove XFAIL. The
- output is fixed now.
- (test_program_termination): Update output pattern.
-
-Tue Nov 30 00:19:10 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mi-console.c, mi-console.exp: New files. Test console output.
-
-Mon Nov 29 17:59:13 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mi-support.exp (mi_run_command): Check for exec-run command
- failure due to MI not having an active target.
- (mi_run_command): Check for and handle a builtin simulator target.
- (mi_run_command): Don't check/handle for ``The program has been
- started already'', not a valid MI response.
-
- * mi-simplerun.exp (test_running_the_program): Update all patterns
- to match async output.
- (test_running_the_program): Mark ``step to callee4'' as XFAIL. MI
- output contains {,reason="end-stepping-range"}+.
-
- * mi-simplerun.exp: Limit the timeout for ``step to callee4'' to
- 30 seconds.
-
-Mon Nov 29 17:30:00 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mi-support.exp (skip_mi_tests): Print UNTESTED when MI interface
- isn't available. Start/stop instead of assuming GDB is running.
- (MIFLAGS): Define.
- * mi-simplerun.exp, mi-disassemble.exp, mi-break.exp,
- mi-basics.exp, mi-watch.exp: Update.
-
-1999-11-26 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * mi-simplerun.exp: Move break-insert {-t, -r} from here.
- * mi-break.exp: To here. New file.
- * mi-watch.exp: New file. Tests for watchpoints.
-
-Wed Nov 24 17:42:07 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdb.mi/ChangeLog-mi: MI entries moved to here.
-
-Wed Nov 24 17:31:04 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * gdb.mi/mi-basics.exp, gdb.mi/mi-disassemble.exp,
- gdb.mi/mi-simplerun.exp: Print warning message when test isn't
- run.
-
-1999-11-23 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * gdb.mi/mi-simplerun.exp: Update output of break-list to account for
- "times" field.
-
-1999-11-05 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * gdb.mi/mi-simplerun.exp: Add tests for temporary breakpoints
- and bp based on regular expressions.
- * gdb.mi/mi-disassemble.exp: Fix typo.
-
-1999-11-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * gdb.mi/mi-disassemble.exp: Update output of execution commands
- to reflect new 'reason' field.
- * gdb.mi/mi-simplerun.exp: Ditto.
-
-1999-10-25 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * gdb.mi/mi-simplerun.exp: Add more stack-list-frames tests.
-
- * gdb.mi/mi-disassemble.exp: Update 'run to main' output.
-
- * gdb.mi/mi-simplerun.exp: Update execution commands
- output. Update backtrace output.
-
-1999-10-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * gdb.mi/mi-disassemble.exp: Add new tests for the new
- disassembly command parameter, number of lines.
-
-Mon Oct 11 13:57:21 1999 Andrew Cagney <cagney@amy.cygnus.com>
-
- * lib/mi-support.exp: Break complicated gdb_expect containing
- exp_continue into a while within an expect. Don't attempt a start
- more than three times. Check return value from gdb_load.
-
-1999-10-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-
- * gdb.mi/mi-disassemble.exp: New file.
-
-Wed Oct 6 12:05:58 1999 Andrew Cagney <cagney@b1.cygnus.com>
-
- * lib/mi-support.exp (mi_run_cmd): Give up after two restart
- attempts.
-
-1999-09290 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * gdb.mi/mi-basics.exp: Update to current syntax and output formats.
- * gdb.mi/mi-simplerun.exp: Ditto.
- * lib/mi-support.exp (mi_delete_breakpoints): Ditto.
-
-1999-06-30 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * gdb.mi/basics.c (main): Fix return code. Add a print "Hello,
- World".
- * gdb.mi/mi-basics.exp: Fix message texts and numbering.
- * gdb.mi/mi-simplerun.exp: Ditto. Also, add new tests and improve
- some patterns.
-
-1999-06-30 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * lib/mi-support.exp (mi_gdb_reinitialize_dir): Remove query as an
- acceptable response to the environment-dir command.
-
-1999-06-30 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * lib/mi-support.exp (mi_delete_breakpoints): Remove references to
- gdb-cli.
- (mi_run_cmd): Ditto.
-
-1999-06-25 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * lib/mi-support.exp (skip_mi_tests): Use gdb-version to check for
- headless output format.
-
-1999-06-24 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * gdb.mi/mi-simplerun.exp (test_controlled_execution): Add global
- spec for hex.
-
-1999-06-24 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * lib/mi-support.exp (mi_run_cmd): Fix pattern and add a timeout
- clause.
-
-1999-06-24 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * lib/mi-support.exp: Use mi_gdb_prompt instead of a modified
- gdb_prompt. Remove uneeded loading of libgloss.
- (mi_gdb_exit): Remove prompt argument.
- (mi_uncatched_gdb_exit): Ditto.
- (mi_run_cmd): New proc. MI version of gdb_run.
- (skip_mi_tests): New proc. Check if gdb is capable of producing
- headless formatted output.
- * gdb.mi/mi-basics.exp: Use mi_gdb_prompt instead of a modified
- gdb_prompt. Eliminate parameter to mi_gdb_exit (as a result of
- the above). Test for skip_mi_tests before running.
- Note: The above changes are interelated (need each other).
- * gdb.mi/mi-simplerun.exp: Same changes as for mi-basics.exe
- above.
- (test_breakpoint_creation_and_listing): Remove insertion of
- breakpoint at callee1 (and renumber tokens). Add tests for
- break-list, break-disable and break-info.
- (test_running_the_program): Use mi_run_cmd so it can run on remote
- targets.
- (test_controlled_execution): Fix broken test.
- (test_program_termination): Test implemented.
- * gdb.mi/basic.c (main): Small change to allow for testing of both
- exec-next and exec-step operations.
-
-1999-06-22 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * lib/mi-support.exp (mi_gdb_test): New proc. MI version of gdb_test.
- * gdb.mi/mi-basics.exp: Use the above instead of gdb_test.
- * gdb.mi/mi-simplerun.exp: Ditto.
-
-1999-06-22 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * gdb.mi/mi-simplerun.exp: New file. Tests simple debugging tasks.
- * gdb.mi/mi-basics.exp: Remove tests moved to above new file.
- * lib/mi-support.exp: New file. Support procedures for mi tests.
-
-1999-06-08 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * gdb.mi/mi-basics.exp: Skip all tests if the MI interpreter is
- not active.
-
-1999-06-03 Fernando Nasser <fnasser@totem.to.cygnus.com>
-
- * gdb.mi: New directory.
- * configure.in: Configure it.
- * configure: Regenerate.
- * gdb.mi/{Makefile.in,configure.in,configure}: New files.
- * gdb.mi/{mi-basics.exp,basics.c,testcmds}: New files.
-
-\f
-Local Variables:
-mode: indented-text
-left-margin: 8
-fill-column: 74
-version-control: never
-End:
projects / binutils-gdb.git / commitdiff