extend.texi: Add -A suffix (ARMv8*-A, ARMv7-A).

2017-11-27  Tamar Christina  <tamar.christina@arm.com>

	* doc/extend.texi: Add -A suffix (ARMv8*-A, ARMv7-A).
	* doc/invoke.texi: Add -A suffix (ARMv8*-A, ARMv7-A).
	* doc/sourcebuild.texi: Add -A suffix (ARMv8*-A, ARMv7-A).

From-SVN: r255169

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index 98e49cdb9c0fb7636228650144355fccd86b296b..66d37d0dbb9490b1fbde4c46025e35b84133a0ca 100644 (file)
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,9 @@
+2017-11-27  Tamar Christina  <tamar.christina@arm.com>
+
+       * doc/extend.texi: Add -A suffix (ARMv8*-A, ARMv7-A).
+       * doc/invoke.texi: Add -A suffix (ARMv8*-A, ARMv7-A).
+       * doc/sourcebuild.texi: Add -A suffix (ARMv8*-A, ARMv7-A).
+
 2017-11-27  Markus Trippelsdorf  <markus@trippelsdorf.de>
 
        * hash-map.h (gt_cleare_cache): Avoid UB.

diff --git a/gcc/doc/extend.texi b/gcc/doc/extend.texi
index 65fc8602860c66270e501dead8481a2912462821..9349f95d0da43008328f43f7421e33049bfc42c6 100644 (file)
--- a/gcc/doc/extend.texi
+++ b/gcc/doc/extend.texi
@@ -1045,7 +1045,7 @@ expressions are automatically promoted to @code{float}.
 
 The ARM target provides hardware support for conversions between
 @code{__fp16} and @code{float} values
-as an extension to VFP and NEON (Advanced SIMD), and from ARMv8 provides
+as an extension to VFP and NEON (Advanced SIMD), and from ARMv8-A provides
 hardware support for conversions between @code{__fp16} and @code{double}
 values.  GCC generates code using these hardware instructions if you
 compile with options to select an FPU that provides them;

diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index cccf39f0b9b0acef33c5d6773bca5d31800f1f45..02a0c1e6d494f2c4337c68b7da981b965f3092d1 100644 (file)
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -15567,8 +15567,8 @@ entirely disabled by the @samp{+nofp} option that follows it.
 Most extension names are generically named, but have an effect that is
 dependent upon the architecture to which it is applied.  For example,
 the @samp{+simd} option can be applied to both @samp{armv7-a} and
-@samp{armv8-a} architectures, but will enable the original ARMv7
-Advanced SIMD (Neon) extensions for @samp{armv7-a} and the ARMv8-a
+@samp{armv8-a} architectures, but will enable the original ARMv7-A
+Advanced SIMD (Neon) extensions for @samp{armv7-a} and the ARMv8-A
 variant for @samp{armv8-a}.
 
 The table below lists the supported extensions for each architecture.
@@ -15709,7 +15709,7 @@ Disable the floating-point and Advanced SIMD instructions.
 @item +crc
 The Cyclic Redundancy Check (CRC) instructions.
 @item +simd
-The ARMv8 Advanced SIMD and floating-point instructions.
+The ARMv8-A Advanced SIMD and floating-point instructions.
 @item +crypto
 The cryptographic instructions.
 @item +nocrypto
@@ -15721,7 +15721,7 @@ Disable the floating-point, Advanced SIMD and cryptographic instructions.
 @item armv8.1-a
 @table @samp
 @item +simd
-The ARMv8.1 Advanced SIMD and floating-point instructions.
+The ARMv8.1-A Advanced SIMD and floating-point instructions.
 
 @item +crypto
 The cryptographic instructions.  This also enables the Advanced SIMD and
@@ -15741,7 +15741,7 @@ The half-precision floating-point data processing instructions.
 This also enables the Advanced SIMD and floating-point instructions.
 
 @item +simd
-The ARMv8.1 Advanced SIMD and floating-point instructions.
+The ARMv8.1-A Advanced SIMD and floating-point instructions.
 
 @item +crypto
 The cryptographic instructions.  This also enables the Advanced SIMD and
@@ -15817,7 +15817,7 @@ The Cyclic Redundancy Check (CRC) instructions.
 @item +fp.sp
 The single-precision FPv5 floating-point instructions.
 @item +simd
-The ARMv8 Advanced SIMD and floating-point instructions.
+The ARMv8-A Advanced SIMD and floating-point instructions.
 @item +crypto
 The cryptographic instructions.
 @item +nocrypto
@@ -16236,9 +16236,9 @@ Divided syntax should be considered deprecated.
 
 @item -mrestrict-it
 @opindex mrestrict-it
-Restricts generation of IT blocks to conform to the rules of ARMv8.
+Restricts generation of IT blocks to conform to the rules of ARMv8-A.
 IT blocks can only contain a single 16-bit instruction from a select
-set of instructions. This option is on by default for ARMv8 Thumb mode.
+set of instructions. This option is on by default for ARMv8-A Thumb mode.
 
 @item -mprint-tune-info
 @opindex mprint-tune-info

diff --git a/gcc/doc/sourcebuild.texi b/gcc/doc/sourcebuild.texi
index d1a3ec03431fa943d21c7951c239f4bbd042fcb2..7daca45b49165033bdc5c6925017ac573e4edc52 100644 (file)
--- a/gcc/doc/sourcebuild.texi
+++ b/gcc/doc/sourcebuild.texi
@@ -1714,11 +1714,11 @@ Some multilibs may be incompatible with these options.
 
 @item arm_v8_1a_neon_ok
 @anchor{arm_v8_1a_neon_ok}
-ARM target supports options to generate ARMv8.1 Adv.SIMD instructions.
+ARM target supports options to generate ARMv8.1-A Adv.SIMD instructions.
 Some multilibs may be incompatible with these options.
 
 @item arm_v8_1a_neon_hw
-ARM target supports executing ARMv8.1 Adv.SIMD instructions.  Some
+ARM target supports executing ARMv8.1-A Adv.SIMD instructions.  Some
 multilibs may be incompatible with the options needed.  Implies
 arm_v8_1a_neon_ok.
 
@@ -1727,34 +1727,34 @@ ARM target supports acquire-release instructions.
 
 @item arm_v8_2a_fp16_scalar_ok
 @anchor{arm_v8_2a_fp16_scalar_ok}
-ARM target supports options to generate instructions for ARMv8.2 and
+ARM target supports options to generate instructions for ARMv8.2-A and
 scalar instructions from the FP16 extension.  Some multilibs may be
 incompatible with these options.
 
 @item arm_v8_2a_fp16_scalar_hw
-ARM target supports executing instructions for ARMv8.2 and scalar
+ARM target supports executing instructions for ARMv8.2-A and scalar
 instructions from the FP16 extension.  Some multilibs may be
 incompatible with these options.  Implies arm_v8_2a_fp16_neon_ok.
 
 @item arm_v8_2a_fp16_neon_ok
 @anchor{arm_v8_2a_fp16_neon_ok}
-ARM target supports options to generate instructions from ARMv8.2 with
+ARM target supports options to generate instructions from ARMv8.2-A with
 the FP16 extension.  Some multilibs may be incompatible with these
 options.  Implies arm_v8_2a_fp16_scalar_ok.
 
 @item arm_v8_2a_fp16_neon_hw
-ARM target supports executing instructions from ARMv8.2 with the FP16
+ARM target supports executing instructions from ARMv8.2-A with the FP16
 extension.  Some multilibs may be incompatible with these options.
 Implies arm_v8_2a_fp16_neon_ok and arm_v8_2a_fp16_scalar_hw.
 
 @item arm_v8_2a_dotprod_neon_ok
 @anchor{arm_v8_2a_dotprod_neon_ok}
-ARM target supports options to generate instructions from ARMv8.2 with
+ARM target supports options to generate instructions from ARMv8.2-A with
 the Dot Product extension. Some multilibs may be incompatible with these
 options.
 
 @item arm_v8_2a_dotprod_neon_hw
-ARM target supports executing instructions from ARMv8.2 with the Dot
+ARM target supports executing instructions from ARMv8.2-A with the Dot
 Product extension. Some multilibs may be incompatible with these options.
 Implies arm_v8_2a_dotprod_neon_ok.
 
@@ -2352,24 +2352,24 @@ arm vfp3 floating point support; see
 the @ref{arm_vfp3_ok,,arm_vfp3_ok effective target keyword}.
 
 @item arm_v8_1a_neon
-Add options for ARMv8.1 with Adv.SIMD support, if this is supported
+Add options for ARMv8.1-A with Adv.SIMD support, if this is supported
 by the target; see the @ref{arm_v8_1a_neon_ok,,arm_v8_1a_neon_ok}
 effective target keyword.
 
 @item arm_v8_2a_fp16_scalar
-Add options for ARMv8.2 with scalar FP16 support, if this is
+Add options for ARMv8.2-A with scalar FP16 support, if this is
 supported by the target; see the
 @ref{arm_v8_2a_fp16_scalar_ok,,arm_v8_2a_fp16_scalar_ok} effective
 target keyword.
 
 @item arm_v8_2a_fp16_neon
-Add options for ARMv8.2 with Adv.SIMD FP16 support, if this is
+Add options for ARMv8.2-A with Adv.SIMD FP16 support, if this is
 supported by the target; see the
 @ref{arm_v8_2a_fp16_neon_ok,,arm_v8_2a_fp16_neon_ok} effective target
 keyword.
 
 @item arm_v8_2a_dotprod_neon
-Add options for ARMv8.2 with Adv.SIMD Dot Product support, if this is
+Add options for ARMv8.2-A with Adv.SIMD Dot Product support, if this is
 supported by the target; see the
 @ref{arm_v8_2a_dotprod_neon_ok} effective target keyword.