+2015-12-18 Antoine Tremblay <antoine.tremblay@ericsson.com>
+
+ * Makefile.in (ALL_TARGET_OBS): Append arm-get-next-pcs.o,
+ arm-linux.o.
+ (ALLDEPFILES): Append arm-get-next-pcs.c, arm-linux.c
+ (arm-linux.o): New rule.
+ (arm-get-next-pcs.o): New rule.
+ * arch/arm-get-next-pcs.c: New file.
+ * arch/arm-get-next-pcs.h: New file.
+ * arch/arm-linux.h: New file.
+ * arch/arm-linux.c: New file.
+ * arm.c: Include common-regcache.c.
+ (thumb_advance_itstate): Moved from arm-tdep.c.
+ (arm_instruction_changes_pc): Likewise.
+ (thumb_instruction_changes_pc): Likewise.
+ (thumb2_instruction_changes_pc): Likewise.
+ (shifted_reg_val): Likewise.
+ * arm.h (submask): Move macro from arm-tdep.h
+ (bit): Likewise.
+ (bits): Likewise.
+ (sbits): Likewise.
+ (BranchDest): Likewise.
+ (thumb_advance_itstate): Moved declaration from arm-tdep.h
+ (arm_instruction_changes_pc): Likewise.
+ (thumb_instruction_changes_pc): Likewise.
+ (thumb2_instruction_changes_pc): Likewise.
+ (shifted_reg_val): Likewise.
+ * arm-linux-tdep.c: Include arch/arm.h, arch/arm-get-next-pcs.h
+ arch/arm-linux.h.
+ (arm_linux_get_next_pcs_ops): New struct.
+ (ARM_SIGCONTEXT_R0, ARM_UCONTEXT_SIGCONTEXT,
+ ARM_OLD_RT_SIGFRAME_SIGINFO, ARM_OLD_RT_SIGFRAME_UCONTEXT,
+ ARM_NEW_RT_SIGFRAME_UCONTEXT, ARM_NEW_SIGFRAME_MAGIC): Move stack
+ layout defines to arch/arm-linux.h.
+ (arm_linux_sigreturn_next_pc_offset): Move to arch/arm-linux.c.
+ (arm_linux_software_single_step): Adjust for arm_get_next_pcs
+ implementation.
+ * arm-tdep.c: Include arch/arm-get-next-pcs.h.
+ (arm_get_next_pcs_ops): New struct.
+ (submask): Move macro to arm.h.
+ (bit): Likewise.
+ (bits): Likewise.
+ (sbits): Likewise.
+ (BranchDest): Likewise.
+ (thumb_instruction_changes_pc): Move to arm.c
+ (thumb2_instruction_changes_pc): Likewise.
+ (arm_instruction_changes_pc): Likewise.
+ (shifted_reg_val): Likewise.
+ (thumb_advance_itstate): Likewise.
+ (thumb_get_next_pc_raw): Move to arm-get-next-pcs.c.
+ (arm_get_next_pc_raw): Likewise.
+ (arm_get_next_pc): Likewise.
+ (thumb_deal_with_atomic_sequence_raw): Likewise.
+ (arm_deal_with_atomic_sequence_raw): Likewise.
+ (arm_deal_with_atomic_sequence): Likewise.
+ (arm_get_next_pcs_read_memory_unsigned_integer): New function.
+ (arm_get_next_pcs_addr_bits_remove): Likewise.
+ (arm_get_next_pcs_syscall_next_pc): Likewise.
+ (arm_get_next_pcs_is_thumb): Likewise.
+ (arm_software_single_step): Adjust for arm_get_next_pcs
+ implementation.
+ * arm-tdep.h: (arm_get_next_pc): Remove declaration.
+ (arm_get_next_pcs_read_memory_unsigned_integer):
+ New declaration.
+ (arm_get_next_pcs_addr_bits_remove): Likewise.
+ (arm_get_next_pcs_syscall_next_pc): Likewise.
+ (arm_get_next_pcs_is_thumb): Likewise.
+ (arm_deal_with_atomic_sequence: Remove declaration.
+ * common/gdb_vecs.h: Add CORE_ADDR vector definition.
+ * configure.tgt (aarch64*-*-linux): Add arm-get-next-pcs.o,
+ arm-linux.o.
+ (arm*-wince-pe): Add arm-get-next-pcs.o.
+ (arm*-*-linux*): Add arm-get-next-pcs.o, arm-linux.o,
+ arm-get-next-pcs.o
+ (arm*-*-netbsd*,arm*-*-knetbsd*-gnu): Add arm-get-next-pcs.o.
+ (arm*-*-openbsd*): Likewise.
+ (arm*-*-symbianelf*): Likewise.
+ (arm*-*-*): Likewise.
+ * symtab.h: Move CORE_ADDR vector definition to gdb_vecs.h.
+
2015-12-18 Antoine Tremblay <antoine.tremblay@ericsson.com>
* Makefile.in (SFILES): Append common/common-regcache.c.
# All other target-dependent objects files (used with --enable-targets=all).
ALL_TARGET_OBS = \
- armbsd-tdep.o arm.o arm-linux-tdep.o arm-symbian-tdep.o \
+ armbsd-tdep.o arm.o arm-linux.o arm-linux-tdep.o \
+ arm-get-next-pcs.o arm-symbian-tdep.o \
armnbsd-tdep.o armobsd-tdep.o \
arm-tdep.o arm-wince-tdep.o \
avr-tdep.o \
amd64-dicos-tdep.c \
amd64-linux-nat.c amd64-linux-tdep.c \
amd64-sol2-tdep.c \
- arm.c \
- arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
+ arm.c arm-get-next-pcs.c \
+ arm-linux.c arm-linux-nat.c arm-linux-tdep.c \
+ arm-symbian-tdep.c arm-tdep.c \
armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
avr-tdep.c \
bfin-linux-tdep.c bfin-tdep.c \
$(COMPILE) $(srcdir)/arch/arm.c
$(POSTCOMPILE)
+arm-linux.o: ${srcdir}/arch/arm-linux.c
+ $(COMPILE) $(srcdir)/arch/arm-linux.c
+ $(POSTCOMPILE)
+
+arm-get-next-pcs.o: ${srcdir}/arch/arm-get-next-pcs.c
+ $(COMPILE) $(srcdir)/arch/arm-get-next-pcs.c
+ $(POSTCOMPILE)
+
# gdb/nat/ dependencies
#
# Need to explicitly specify the compile rule as make will do nothing
--- /dev/null
+/* Common code for ARM software single stepping support.
+
+ Copyright (C) 1988-2015 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "common-defs.h"
+#include "gdb_vecs.h"
+#include "common-regcache.h"
+#include "arm.h"
+#include "arm-get-next-pcs.h"
+
+/* See arm-get-next-pcs.h. */
+
+void
+arm_get_next_pcs_ctor (struct arm_get_next_pcs *self,
+ struct arm_get_next_pcs_ops *ops,
+ int byte_order,
+ int byte_order_for_code,
+ const gdb_byte *arm_thumb2_breakpoint,
+ struct regcache *regcache)
+{
+ self->ops = ops;
+ self->byte_order = byte_order;
+ self->byte_order_for_code = byte_order_for_code;
+ self->arm_thumb2_breakpoint = arm_thumb2_breakpoint;
+ self->regcache = regcache;
+}
+
+/* Checks for an atomic sequence of instructions beginning with a LDREX{,B,H,D}
+ instruction and ending with a STREX{,B,H,D} instruction. If such a sequence
+ is found, attempt to step through it. The end of the sequence address is
+ added to the next_pcs list. */
+
+static VEC (CORE_ADDR) *
+thumb_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self,
+ CORE_ADDR pc)
+{
+ int byte_order_for_code = self->byte_order_for_code;
+ CORE_ADDR breaks[2] = {-1, -1};
+ CORE_ADDR loc = pc;
+ unsigned short insn1, insn2;
+ int insn_count;
+ int index;
+ int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
+ const int atomic_sequence_length = 16; /* Instruction sequence length. */
+ ULONGEST status, itstate;
+ VEC (CORE_ADDR) *next_pcs = NULL;
+
+ /* We currently do not support atomic sequences within an IT block. */
+ status = regcache_raw_get_unsigned (self->regcache, ARM_PS_REGNUM);
+ itstate = ((status >> 8) & 0xfc) | ((status >> 25) & 0x3);
+ if (itstate & 0x0f)
+ return NULL;
+
+ /* Assume all atomic sequences start with a ldrex{,b,h,d} instruction. */
+ insn1 = self->ops->read_mem_uint (loc, 2, byte_order_for_code);
+
+ loc += 2;
+ if (thumb_insn_size (insn1) != 4)
+ return NULL;
+
+ insn2 = self->ops->read_mem_uint (loc, 2, byte_order_for_code);
+
+ loc += 2;
+ if (!((insn1 & 0xfff0) == 0xe850
+ || ((insn1 & 0xfff0) == 0xe8d0 && (insn2 & 0x00c0) == 0x0040)))
+ return NULL;
+
+ /* Assume that no atomic sequence is longer than "atomic_sequence_length"
+ instructions. */
+ for (insn_count = 0; insn_count < atomic_sequence_length; ++insn_count)
+ {
+ insn1 = self->ops->read_mem_uint (loc, 2,byte_order_for_code);
+ loc += 2;
+
+ if (thumb_insn_size (insn1) != 4)
+ {
+ /* Assume that there is at most one conditional branch in the
+ atomic sequence. If a conditional branch is found, put a
+ breakpoint in its destination address. */
+ if ((insn1 & 0xf000) == 0xd000 && bits (insn1, 8, 11) != 0x0f)
+ {
+ if (last_breakpoint > 0)
+ return NULL; /* More than one conditional branch found,
+ fallback to the standard code. */
+
+ breaks[1] = loc + 2 + (sbits (insn1, 0, 7) << 1);
+ last_breakpoint++;
+ }
+
+ /* We do not support atomic sequences that use any *other*
+ instructions but conditional branches to change the PC.
+ Fall back to standard code to avoid losing control of
+ execution. */
+ else if (thumb_instruction_changes_pc (insn1))
+ return NULL;
+ }
+ else
+ {
+ insn2 = self->ops->read_mem_uint (loc, 2, byte_order_for_code);
+
+ loc += 2;
+
+ /* Assume that there is at most one conditional branch in the
+ atomic sequence. If a conditional branch is found, put a
+ breakpoint in its destination address. */
+ if ((insn1 & 0xf800) == 0xf000
+ && (insn2 & 0xd000) == 0x8000
+ && (insn1 & 0x0380) != 0x0380)
+ {
+ int sign, j1, j2, imm1, imm2;
+ unsigned int offset;
+
+ sign = sbits (insn1, 10, 10);
+ imm1 = bits (insn1, 0, 5);
+ imm2 = bits (insn2, 0, 10);
+ j1 = bit (insn2, 13);
+ j2 = bit (insn2, 11);
+
+ offset = (sign << 20) + (j2 << 19) + (j1 << 18);
+ offset += (imm1 << 12) + (imm2 << 1);
+
+ if (last_breakpoint > 0)
+ return 0; /* More than one conditional branch found,
+ fallback to the standard code. */
+
+ breaks[1] = loc + offset;
+ last_breakpoint++;
+ }
+
+ /* We do not support atomic sequences that use any *other*
+ instructions but conditional branches to change the PC.
+ Fall back to standard code to avoid losing control of
+ execution. */
+ else if (thumb2_instruction_changes_pc (insn1, insn2))
+ return NULL;
+
+ /* If we find a strex{,b,h,d}, we're done. */
+ if ((insn1 & 0xfff0) == 0xe840
+ || ((insn1 & 0xfff0) == 0xe8c0 && (insn2 & 0x00c0) == 0x0040))
+ break;
+ }
+ }
+
+ /* If we didn't find the strex{,b,h,d}, we cannot handle the sequence. */
+ if (insn_count == atomic_sequence_length)
+ return NULL;
+
+ /* Insert a breakpoint right after the end of the atomic sequence. */
+ breaks[0] = loc;
+
+ /* Check for duplicated breakpoints. Check also for a breakpoint
+ placed (branch instruction's destination) anywhere in sequence. */
+ if (last_breakpoint
+ && (breaks[1] == breaks[0]
+ || (breaks[1] >= pc && breaks[1] < loc)))
+ last_breakpoint = 0;
+
+ /* Adds the breakpoints to the list to be inserted. */
+ for (index = 0; index <= last_breakpoint; index++)
+ VEC_safe_push (CORE_ADDR, next_pcs, MAKE_THUMB_ADDR (breaks[index]));
+
+ return next_pcs;
+}
+
+/* Checks for an atomic sequence of instructions beginning with a LDREX{,B,H,D}
+ instruction and ending with a STREX{,B,H,D} instruction. If such a sequence
+ is found, attempt to step through it. The end of the sequence address is
+ added to the next_pcs list. */
+
+static VEC (CORE_ADDR) *
+arm_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self,
+ CORE_ADDR pc)
+{
+ int byte_order_for_code = self->byte_order_for_code;
+ CORE_ADDR breaks[2] = {-1, -1};
+ CORE_ADDR loc = pc;
+ unsigned int insn;
+ int insn_count;
+ int index;
+ int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
+ const int atomic_sequence_length = 16; /* Instruction sequence length. */
+ VEC (CORE_ADDR) *next_pcs = NULL;
+
+ /* Assume all atomic sequences start with a ldrex{,b,h,d} instruction.
+ Note that we do not currently support conditionally executed atomic
+ instructions. */
+ insn = self->ops->read_mem_uint (loc, 4, byte_order_for_code);
+
+ loc += 4;
+ if ((insn & 0xff9000f0) != 0xe1900090)
+ return NULL;
+
+ /* Assume that no atomic sequence is longer than "atomic_sequence_length"
+ instructions. */
+ for (insn_count = 0; insn_count < atomic_sequence_length; ++insn_count)
+ {
+ insn = self->ops->read_mem_uint (loc, 4, byte_order_for_code);
+
+ loc += 4;
+
+ /* Assume that there is at most one conditional branch in the atomic
+ sequence. If a conditional branch is found, put a breakpoint in
+ its destination address. */
+ if (bits (insn, 24, 27) == 0xa)
+ {
+ if (last_breakpoint > 0)
+ return NULL; /* More than one conditional branch found, fallback
+ to the standard single-step code. */
+
+ breaks[1] = BranchDest (loc - 4, insn);
+ last_breakpoint++;
+ }
+
+ /* We do not support atomic sequences that use any *other* instructions
+ but conditional branches to change the PC. Fall back to standard
+ code to avoid losing control of execution. */
+ else if (arm_instruction_changes_pc (insn))
+ return NULL;
+
+ /* If we find a strex{,b,h,d}, we're done. */
+ if ((insn & 0xff9000f0) == 0xe1800090)
+ break;
+ }
+
+ /* If we didn't find the strex{,b,h,d}, we cannot handle the sequence. */
+ if (insn_count == atomic_sequence_length)
+ return NULL;
+
+ /* Insert a breakpoint right after the end of the atomic sequence. */
+ breaks[0] = loc;
+
+ /* Check for duplicated breakpoints. Check also for a breakpoint
+ placed (branch instruction's destination) anywhere in sequence. */
+ if (last_breakpoint
+ && (breaks[1] == breaks[0]
+ || (breaks[1] >= pc && breaks[1] < loc)))
+ last_breakpoint = 0;
+
+ /* Adds the breakpoints to the list to be inserted. */
+ for (index = 0; index <= last_breakpoint; index++)
+ VEC_safe_push (CORE_ADDR, next_pcs, breaks[index]);
+
+ return next_pcs;
+}
+
+/* See arm-get-next-pcs.h. */
+
+VEC (CORE_ADDR) *
+arm_get_next_pcs (struct arm_get_next_pcs *self, CORE_ADDR pc)
+{
+ VEC (CORE_ADDR) *next_pcs = NULL;
+
+ if (self->ops->is_thumb (self))
+ {
+ next_pcs = thumb_deal_with_atomic_sequence_raw (self, pc);
+ if (next_pcs == NULL)
+ next_pcs = thumb_get_next_pcs_raw (self, pc);
+ }
+ else
+ {
+ next_pcs = arm_deal_with_atomic_sequence_raw (self, pc);
+ if (next_pcs == NULL)
+ next_pcs = arm_get_next_pcs_raw (self, pc);
+ }
+
+ return next_pcs;
+}
+
+/* See arm-get-next-pcs.h. */
+
+VEC (CORE_ADDR) *
+thumb_get_next_pcs_raw (struct arm_get_next_pcs *self,
+ CORE_ADDR pc)
+{
+ int byte_order = self->byte_order;
+ int byte_order_for_code = self->byte_order_for_code;
+ unsigned long pc_val = ((unsigned long) pc) + 4; /* PC after prefetch */
+ unsigned short inst1;
+ CORE_ADDR nextpc = pc + 2; /* Default is next instruction. */
+ unsigned long offset;
+ ULONGEST status, itstate;
+ struct regcache *regcache = self->regcache;
+ VEC (CORE_ADDR) * next_pcs = NULL;
+
+ nextpc = MAKE_THUMB_ADDR (nextpc);
+ pc_val = MAKE_THUMB_ADDR (pc_val);
+
+ inst1 = self->ops->read_mem_uint (pc, 2, byte_order_for_code);
+
+ /* Thumb-2 conditional execution support. There are eight bits in
+ the CPSR which describe conditional execution state. Once
+ reconstructed (they're in a funny order), the low five bits
+ describe the low bit of the condition for each instruction and
+ how many instructions remain. The high three bits describe the
+ base condition. One of the low four bits will be set if an IT
+ block is active. These bits read as zero on earlier
+ processors. */
+ status = regcache_raw_get_unsigned (regcache, ARM_PS_REGNUM);
+ itstate = ((status >> 8) & 0xfc) | ((status >> 25) & 0x3);
+
+ /* If-Then handling. On GNU/Linux, where this routine is used, we
+ use an undefined instruction as a breakpoint. Unlike BKPT, IT
+ can disable execution of the undefined instruction. So we might
+ miss the breakpoint if we set it on a skipped conditional
+ instruction. Because conditional instructions can change the
+ flags, affecting the execution of further instructions, we may
+ need to set two breakpoints. */
+
+ if (self->arm_thumb2_breakpoint != NULL)
+ {
+ if ((inst1 & 0xff00) == 0xbf00 && (inst1 & 0x000f) != 0)
+ {
+ /* An IT instruction. Because this instruction does not
+ modify the flags, we can accurately predict the next
+ executed instruction. */
+ itstate = inst1 & 0x00ff;
+ pc += thumb_insn_size (inst1);
+
+ while (itstate != 0 && ! condition_true (itstate >> 4, status))
+ {
+ inst1 = self->ops->read_mem_uint (pc, 2,byte_order_for_code);
+ pc += thumb_insn_size (inst1);
+ itstate = thumb_advance_itstate (itstate);
+ }
+
+ VEC_safe_push (CORE_ADDR, next_pcs, MAKE_THUMB_ADDR (pc));
+ return next_pcs;
+ }
+ else if (itstate != 0)
+ {
+ /* We are in a conditional block. Check the condition. */
+ if (! condition_true (itstate >> 4, status))
+ {
+ /* Advance to the next executed instruction. */
+ pc += thumb_insn_size (inst1);
+ itstate = thumb_advance_itstate (itstate);
+
+ while (itstate != 0 && ! condition_true (itstate >> 4, status))
+ {
+ inst1 = self->ops->read_mem_uint (pc, 2, byte_order_for_code);
+
+ pc += thumb_insn_size (inst1);
+ itstate = thumb_advance_itstate (itstate);
+ }
+
+ VEC_safe_push (CORE_ADDR, next_pcs, MAKE_THUMB_ADDR (pc));
+ return next_pcs;
+ }
+ else if ((itstate & 0x0f) == 0x08)
+ {
+ /* This is the last instruction of the conditional
+ block, and it is executed. We can handle it normally
+ because the following instruction is not conditional,
+ and we must handle it normally because it is
+ permitted to branch. Fall through. */
+ }
+ else
+ {
+ int cond_negated;
+
+ /* There are conditional instructions after this one.
+ If this instruction modifies the flags, then we can
+ not predict what the next executed instruction will
+ be. Fortunately, this instruction is architecturally
+ forbidden to branch; we know it will fall through.
+ Start by skipping past it. */
+ pc += thumb_insn_size (inst1);
+ itstate = thumb_advance_itstate (itstate);
+
+ /* Set a breakpoint on the following instruction. */
+ gdb_assert ((itstate & 0x0f) != 0);
+ VEC_safe_push (CORE_ADDR, next_pcs, MAKE_THUMB_ADDR (pc));
+
+ cond_negated = (itstate >> 4) & 1;
+
+ /* Skip all following instructions with the same
+ condition. If there is a later instruction in the IT
+ block with the opposite condition, set the other
+ breakpoint there. If not, then set a breakpoint on
+ the instruction after the IT block. */
+ do
+ {
+ inst1 = self->ops->read_mem_uint (pc, 2, byte_order_for_code);
+ pc += thumb_insn_size (inst1);
+ itstate = thumb_advance_itstate (itstate);
+ }
+ while (itstate != 0 && ((itstate >> 4) & 1) == cond_negated);
+
+ VEC_safe_push (CORE_ADDR, next_pcs, MAKE_THUMB_ADDR (pc));
+
+ return next_pcs;
+ }
+ }
+ }
+ else if (itstate & 0x0f)
+ {
+ /* We are in a conditional block. Check the condition. */
+ int cond = itstate >> 4;
+
+ if (! condition_true (cond, status))
+ {
+ /* Advance to the next instruction. All the 32-bit
+ instructions share a common prefix. */
+ VEC_safe_push (CORE_ADDR, next_pcs,
+ MAKE_THUMB_ADDR (pc + thumb_insn_size (inst1)));
+ }
+
+ return next_pcs;
+
+ /* Otherwise, handle the instruction normally. */
+ }
+
+ if ((inst1 & 0xff00) == 0xbd00) /* pop {rlist, pc} */
+ {
+ CORE_ADDR sp;
+
+ /* Fetch the saved PC from the stack. It's stored above
+ all of the other registers. */
+ offset = bitcount (bits (inst1, 0, 7)) * INT_REGISTER_SIZE;
+ sp = regcache_raw_get_unsigned (regcache, ARM_SP_REGNUM);
+ nextpc = self->ops->read_mem_uint (sp + offset, 4, byte_order);
+ }
+ else if ((inst1 & 0xf000) == 0xd000) /* conditional branch */
+ {
+ unsigned long cond = bits (inst1, 8, 11);
+ if (cond == 0x0f) /* 0x0f = SWI */
+ {
+ nextpc = self->ops->syscall_next_pc (self, pc);
+ }
+ else if (cond != 0x0f && condition_true (cond, status))
+ nextpc = pc_val + (sbits (inst1, 0, 7) << 1);
+ }
+ else if ((inst1 & 0xf800) == 0xe000) /* unconditional branch */
+ {
+ nextpc = pc_val + (sbits (inst1, 0, 10) << 1);
+ }
+ else if (thumb_insn_size (inst1) == 4) /* 32-bit instruction */
+ {
+ unsigned short inst2;
+ inst2 = self->ops->read_mem_uint (pc + 2, 2, byte_order_for_code);
+
+ /* Default to the next instruction. */
+ nextpc = pc + 4;
+ nextpc = MAKE_THUMB_ADDR (nextpc);
+
+ if ((inst1 & 0xf800) == 0xf000 && (inst2 & 0x8000) == 0x8000)
+ {
+ /* Branches and miscellaneous control instructions. */
+
+ if ((inst2 & 0x1000) != 0 || (inst2 & 0xd001) == 0xc000)
+ {
+ /* B, BL, BLX. */
+ int j1, j2, imm1, imm2;
+
+ imm1 = sbits (inst1, 0, 10);
+ imm2 = bits (inst2, 0, 10);
+ j1 = bit (inst2, 13);
+ j2 = bit (inst2, 11);
+
+ offset = ((imm1 << 12) + (imm2 << 1));
+ offset ^= ((!j2) << 22) | ((!j1) << 23);
+
+ nextpc = pc_val + offset;
+ /* For BLX make sure to clear the low bits. */
+ if (bit (inst2, 12) == 0)
+ nextpc = nextpc & 0xfffffffc;
+ }
+ else if (inst1 == 0xf3de && (inst2 & 0xff00) == 0x3f00)
+ {
+ /* SUBS PC, LR, #imm8. */
+ nextpc = regcache_raw_get_unsigned (regcache, ARM_LR_REGNUM);
+ nextpc -= inst2 & 0x00ff;
+ }
+ else if ((inst2 & 0xd000) == 0x8000 && (inst1 & 0x0380) != 0x0380)
+ {
+ /* Conditional branch. */
+ if (condition_true (bits (inst1, 6, 9), status))
+ {
+ int sign, j1, j2, imm1, imm2;
+
+ sign = sbits (inst1, 10, 10);
+ imm1 = bits (inst1, 0, 5);
+ imm2 = bits (inst2, 0, 10);
+ j1 = bit (inst2, 13);
+ j2 = bit (inst2, 11);
+
+ offset = (sign << 20) + (j2 << 19) + (j1 << 18);
+ offset += (imm1 << 12) + (imm2 << 1);
+
+ nextpc = pc_val + offset;
+ }
+ }
+ }
+ else if ((inst1 & 0xfe50) == 0xe810)
+ {
+ /* Load multiple or RFE. */
+ int rn, offset, load_pc = 1;
+
+ rn = bits (inst1, 0, 3);
+ if (bit (inst1, 7) && !bit (inst1, 8))
+ {
+ /* LDMIA or POP */
+ if (!bit (inst2, 15))
+ load_pc = 0;
+ offset = bitcount (inst2) * 4 - 4;
+ }
+ else if (!bit (inst1, 7) && bit (inst1, 8))
+ {
+ /* LDMDB */
+ if (!bit (inst2, 15))
+ load_pc = 0;
+ offset = -4;
+ }
+ else if (bit (inst1, 7) && bit (inst1, 8))
+ {
+ /* RFEIA */
+ offset = 0;
+ }
+ else if (!bit (inst1, 7) && !bit (inst1, 8))
+ {
+ /* RFEDB */
+ offset = -8;
+ }
+ else
+ load_pc = 0;
+
+ if (load_pc)
+ {
+ CORE_ADDR addr = regcache_raw_get_unsigned (regcache, rn);
+ nextpc = self->ops->read_mem_uint (addr + offset, 4, byte_order);
+ }
+ }
+ else if ((inst1 & 0xffef) == 0xea4f && (inst2 & 0xfff0) == 0x0f00)
+ {
+ /* MOV PC or MOVS PC. */
+ nextpc = regcache_raw_get_unsigned (regcache, bits (inst2, 0, 3));
+ nextpc = MAKE_THUMB_ADDR (nextpc);
+ }
+ else if ((inst1 & 0xff70) == 0xf850 && (inst2 & 0xf000) == 0xf000)
+ {
+ /* LDR PC. */
+ CORE_ADDR base;
+ int rn, load_pc = 1;
+
+ rn = bits (inst1, 0, 3);
+ base = regcache_raw_get_unsigned (regcache, rn);
+ if (rn == ARM_PC_REGNUM)
+ {
+ base = (base + 4) & ~(CORE_ADDR) 0x3;
+ if (bit (inst1, 7))
+ base += bits (inst2, 0, 11);
+ else
+ base -= bits (inst2, 0, 11);
+ }
+ else if (bit (inst1, 7))
+ base += bits (inst2, 0, 11);
+ else if (bit (inst2, 11))
+ {
+ if (bit (inst2, 10))
+ {
+ if (bit (inst2, 9))
+ base += bits (inst2, 0, 7);
+ else
+ base -= bits (inst2, 0, 7);
+ }
+ }
+ else if ((inst2 & 0x0fc0) == 0x0000)
+ {
+ int shift = bits (inst2, 4, 5), rm = bits (inst2, 0, 3);
+ base += regcache_raw_get_unsigned (regcache, rm) << shift;
+ }
+ else
+ /* Reserved. */
+ load_pc = 0;
+
+ if (load_pc)
+ nextpc
+ = self->ops->read_mem_uint (base, 4, byte_order);
+ }
+ else if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf000)
+ {
+ /* TBB. */
+ CORE_ADDR tbl_reg, table, offset, length;
+
+ tbl_reg = bits (inst1, 0, 3);
+ if (tbl_reg == 0x0f)
+ table = pc + 4; /* Regcache copy of PC isn't right yet. */
+ else
+ table = regcache_raw_get_unsigned (regcache, tbl_reg);
+
+ offset = regcache_raw_get_unsigned (regcache, bits (inst2, 0, 3));
+ length = 2 * self->ops->read_mem_uint (table + offset, 1, byte_order);
+ nextpc = pc_val + length;
+ }
+ else if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf010)
+ {
+ /* TBH. */
+ CORE_ADDR tbl_reg, table, offset, length;
+
+ tbl_reg = bits (inst1, 0, 3);
+ if (tbl_reg == 0x0f)
+ table = pc + 4; /* Regcache copy of PC isn't right yet. */
+ else
+ table = regcache_raw_get_unsigned (regcache, tbl_reg);
+
+ offset = 2 * regcache_raw_get_unsigned (regcache, bits (inst2, 0, 3));
+ length = 2 * self->ops->read_mem_uint (table + offset, 2, byte_order);
+ nextpc = pc_val + length;
+ }
+ }
+ else if ((inst1 & 0xff00) == 0x4700) /* bx REG, blx REG */
+ {
+ if (bits (inst1, 3, 6) == 0x0f)
+ nextpc = UNMAKE_THUMB_ADDR (pc_val);
+ else
+ nextpc = regcache_raw_get_unsigned (regcache, bits (inst1, 3, 6));
+ }
+ else if ((inst1 & 0xff87) == 0x4687) /* mov pc, REG */
+ {
+ if (bits (inst1, 3, 6) == 0x0f)
+ nextpc = pc_val;
+ else
+ nextpc = regcache_raw_get_unsigned (regcache, bits (inst1, 3, 6));
+
+ nextpc = MAKE_THUMB_ADDR (nextpc);
+ }
+ else if ((inst1 & 0xf500) == 0xb100)
+ {
+ /* CBNZ or CBZ. */
+ int imm = (bit (inst1, 9) << 6) + (bits (inst1, 3, 7) << 1);
+ ULONGEST reg = regcache_raw_get_unsigned (regcache, bits (inst1, 0, 2));
+
+ if (bit (inst1, 11) && reg != 0)
+ nextpc = pc_val + imm;
+ else if (!bit (inst1, 11) && reg == 0)
+ nextpc = pc_val + imm;
+ }
+
+ VEC_safe_push (CORE_ADDR, next_pcs, nextpc);
+
+ return next_pcs;
+}
+
+/* Get the raw next possible addresses. PC in next_pcs is the current program
+ counter, which is assumed to be executing in ARM mode.
+
+ The values returned have the execution state of the next instruction
+ encoded in it. Use IS_THUMB_ADDR () to see whether the instruction is
+ in Thumb-State, and gdbarch_addr_bits_remove () to get the plain memory
+ address in GDB and arm_addr_bits_remove in GDBServer. */
+
+VEC (CORE_ADDR) *
+arm_get_next_pcs_raw (struct arm_get_next_pcs *self,
+ CORE_ADDR pc)
+{
+ int byte_order = self->byte_order;
+ unsigned long pc_val;
+ unsigned long this_instr = 0;
+ unsigned long status;
+ CORE_ADDR nextpc;
+ struct regcache *regcache = self->regcache;
+ VEC (CORE_ADDR) *next_pcs = NULL;
+
+ pc_val = (unsigned long) pc;
+ this_instr = self->ops->read_mem_uint (pc, 4, byte_order);
+
+ status = regcache_raw_get_unsigned (regcache, ARM_PS_REGNUM);
+ nextpc = (CORE_ADDR) (pc_val + 4); /* Default case */
+
+ if (bits (this_instr, 28, 31) == INST_NV)
+ switch (bits (this_instr, 24, 27))
+ {
+ case 0xa:
+ case 0xb:
+ {
+ /* Branch with Link and change to Thumb. */
+ nextpc = BranchDest (pc, this_instr);
+ nextpc |= bit (this_instr, 24) << 1;
+ nextpc = MAKE_THUMB_ADDR (nextpc);
+ break;
+ }
+ case 0xc:
+ case 0xd:
+ case 0xe:
+ /* Coprocessor register transfer. */
+ if (bits (this_instr, 12, 15) == 15)
+ error (_("Invalid update to pc in instruction"));
+ break;
+ }
+ else if (condition_true (bits (this_instr, 28, 31), status))
+ {
+ switch (bits (this_instr, 24, 27))
+ {
+ case 0x0:
+ case 0x1: /* data processing */
+ case 0x2:
+ case 0x3:
+ {
+ unsigned long operand1, operand2, result = 0;
+ unsigned long rn;
+ int c;
+
+ if (bits (this_instr, 12, 15) != 15)
+ break;
+
+ if (bits (this_instr, 22, 25) == 0
+ && bits (this_instr, 4, 7) == 9) /* multiply */
+ error (_("Invalid update to pc in instruction"));
+
+ /* BX <reg>, BLX <reg> */
+ if (bits (this_instr, 4, 27) == 0x12fff1
+ || bits (this_instr, 4, 27) == 0x12fff3)
+ {
+ rn = bits (this_instr, 0, 3);
+ nextpc = ((rn == ARM_PC_REGNUM)
+ ? (pc_val + 8)
+ : regcache_raw_get_unsigned (regcache, rn));
+
+ VEC_safe_push (CORE_ADDR, next_pcs, nextpc);
+ return next_pcs;
+ }
+
+ /* Multiply into PC. */
+ c = (status & FLAG_C) ? 1 : 0;
+ rn = bits (this_instr, 16, 19);
+ operand1 = ((rn == ARM_PC_REGNUM)
+ ? (pc_val + 8)
+ : regcache_raw_get_unsigned (regcache, rn));
+
+ if (bit (this_instr, 25))
+ {
+ unsigned long immval = bits (this_instr, 0, 7);
+ unsigned long rotate = 2 * bits (this_instr, 8, 11);
+ operand2 = ((immval >> rotate) | (immval << (32 - rotate)))
+ & 0xffffffff;
+ }
+ else /* operand 2 is a shifted register. */
+ operand2 = shifted_reg_val (regcache, this_instr, c,
+ pc_val, status);
+
+ switch (bits (this_instr, 21, 24))
+ {
+ case 0x0: /*and */
+ result = operand1 & operand2;
+ break;
+
+ case 0x1: /*eor */
+ result = operand1 ^ operand2;
+ break;
+
+ case 0x2: /*sub */
+ result = operand1 - operand2;
+ break;
+
+ case 0x3: /*rsb */
+ result = operand2 - operand1;
+ break;
+
+ case 0x4: /*add */
+ result = operand1 + operand2;
+ break;
+
+ case 0x5: /*adc */
+ result = operand1 + operand2 + c;
+ break;
+
+ case 0x6: /*sbc */
+ result = operand1 - operand2 + c;
+ break;
+
+ case 0x7: /*rsc */
+ result = operand2 - operand1 + c;
+ break;
+
+ case 0x8:
+ case 0x9:
+ case 0xa:
+ case 0xb: /* tst, teq, cmp, cmn */
+ result = (unsigned long) nextpc;
+ break;
+
+ case 0xc: /*orr */
+ result = operand1 | operand2;
+ break;
+
+ case 0xd: /*mov */
+ /* Always step into a function. */
+ result = operand2;
+ break;
+
+ case 0xe: /*bic */
+ result = operand1 & ~operand2;
+ break;
+
+ case 0xf: /*mvn */
+ result = ~operand2;
+ break;
+ }
+ nextpc = self->ops->addr_bits_remove (self, result);
+ break;
+ }
+
+ case 0x4:
+ case 0x5: /* data transfer */
+ case 0x6:
+ case 0x7:
+ if (bits (this_instr, 25, 27) == 0x3 && bit (this_instr, 4) == 1)
+ {
+ /* Media instructions and architecturally undefined
+ instructions. */
+ break;
+ }
+
+ if (bit (this_instr, 20))
+ {
+ /* load */
+ if (bits (this_instr, 12, 15) == 15)
+ {
+ /* rd == pc */
+ unsigned long rn;
+ unsigned long base;
+
+ if (bit (this_instr, 22))
+ error (_("Invalid update to pc in instruction"));
+
+ /* byte write to PC */
+ rn = bits (this_instr, 16, 19);
+ base = ((rn == ARM_PC_REGNUM)
+ ? (pc_val + 8)
+ : regcache_raw_get_unsigned (regcache, rn));
+
+ if (bit (this_instr, 24))
+ {
+ /* pre-indexed */
+ int c = (status & FLAG_C) ? 1 : 0;
+ unsigned long offset =
+ (bit (this_instr, 25)
+ ? shifted_reg_val (regcache, this_instr, c,
+ pc_val, status)
+ : bits (this_instr, 0, 11));
+
+ if (bit (this_instr, 23))
+ base += offset;
+ else
+ base -= offset;
+ }
+ nextpc
+ = (CORE_ADDR) self->ops->read_mem_uint ((CORE_ADDR) base,
+ 4, byte_order);
+ }
+ }
+ break;
+
+ case 0x8:
+ case 0x9: /* block transfer */
+ if (bit (this_instr, 20))
+ {
+ /* LDM */
+ if (bit (this_instr, 15))
+ {
+ /* loading pc */
+ int offset = 0;
+ CORE_ADDR rn_val_offset = 0;
+ unsigned long rn_val
+ = regcache_raw_get_unsigned (regcache,
+ bits (this_instr, 16, 19));
+
+ if (bit (this_instr, 23))
+ {
+ /* up */
+ unsigned long reglist = bits (this_instr, 0, 14);
+ offset = bitcount (reglist) * 4;
+ if (bit (this_instr, 24)) /* pre */
+ offset += 4;
+ }
+ else if (bit (this_instr, 24))
+ offset = -4;
+
+ rn_val_offset = rn_val + offset;
+ nextpc = (CORE_ADDR) self->ops->read_mem_uint (rn_val_offset,
+ 4, byte_order);
+ }
+ }
+ break;
+
+ case 0xb: /* branch & link */
+ case 0xa: /* branch */
+ {
+ nextpc = BranchDest (pc, this_instr);
+ break;
+ }
+
+ case 0xc:
+ case 0xd:
+ case 0xe: /* coproc ops */
+ break;
+ case 0xf: /* SWI */
+ {
+ nextpc = self->ops->syscall_next_pc (self, pc);
+ }
+ break;
+
+ default:
+ error (_("Bad bit-field extraction\n"));
+ return next_pcs;
+ }
+ }
+
+ VEC_safe_push (CORE_ADDR, next_pcs, nextpc);
+ return next_pcs;
+}
--- /dev/null
+/* Common code for ARM software single stepping support.
+
+ Copyright (C) 1988-2015 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#ifndef ARM_GET_NEXT_PCS_H
+#define ARM_GET_NEXT_PCS_H 1
+
+/* Forward declaration. */
+struct arm_get_next_pcs;
+
+/* get_next_pcs operations. */
+struct arm_get_next_pcs_ops
+{
+ ULONGEST (*read_mem_uint) (CORE_ADDR memaddr, int len, int byte_order);
+ CORE_ADDR (*syscall_next_pc) (struct arm_get_next_pcs *self, CORE_ADDR pc);
+ CORE_ADDR (*addr_bits_remove) (struct arm_get_next_pcs *self, CORE_ADDR val);
+ int (*is_thumb) (struct arm_get_next_pcs *self);
+};
+
+/* Context for a get_next_pcs call on ARM. */
+struct arm_get_next_pcs
+{
+ /* Operations implementations. */
+ struct arm_get_next_pcs_ops *ops;
+ /* Byte order for data. */
+ int byte_order;
+ /* Byte order for code. */
+ int byte_order_for_code;
+ /* Thumb2 breakpoint instruction. */
+ const gdb_byte *arm_thumb2_breakpoint;
+ /* Registry cache. */
+ struct regcache *regcache;
+};
+
+/* Initialize arm_get_next_pcs. */
+void arm_get_next_pcs_ctor (struct arm_get_next_pcs *self,
+ struct arm_get_next_pcs_ops *ops,
+ int byte_order,
+ int byte_order_for_code,
+ const gdb_byte *arm_thumb2_breakpoint,
+ struct regcache *regcache);
+
+/* Find the next possible PCs after the current instruction executes. */
+VEC (CORE_ADDR) *arm_get_next_pcs (struct arm_get_next_pcs *self,
+ CORE_ADDR pc);
+
+/* Find the next possible PCs for thumb mode. */
+VEC (CORE_ADDR) *thumb_get_next_pcs_raw (struct arm_get_next_pcs *self,
+ CORE_ADDR pc);
+
+/* Find the next possible PCs for arm mode. */
+VEC (CORE_ADDR) *arm_get_next_pcs_raw (struct arm_get_next_pcs *self,
+ CORE_ADDR pc);
+
+#endif /* ARM_GET_NEXT_PCS_H */
--- /dev/null
+/* Common target dependent code for GNU/Linux on ARM systems.
+
+ Copyright (C) 1999-2015 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "common-defs.h"
+#include "arch/arm.h"
+#include "arm-linux.h"
+
+/* Calculate the offset from stack pointer of the pc register on the stack
+ in the case of a sigreturn or sigreturn_rt syscall. */
+int
+arm_linux_sigreturn_next_pc_offset (unsigned long sp,
+ unsigned long sp_data,
+ unsigned long svc_number,
+ int is_sigreturn)
+{
+ /* Offset of R0 register. */
+ int r0_offset = 0;
+ /* Offset of PC register. */
+ int pc_offset = 0;
+
+ if (is_sigreturn)
+ {
+ if (sp_data == ARM_NEW_SIGFRAME_MAGIC)
+ r0_offset = ARM_UCONTEXT_SIGCONTEXT + ARM_SIGCONTEXT_R0;
+ else
+ r0_offset = ARM_SIGCONTEXT_R0;
+ }
+ else
+ {
+ if (sp_data == sp + ARM_OLD_RT_SIGFRAME_SIGINFO)
+ r0_offset = ARM_OLD_RT_SIGFRAME_UCONTEXT;
+ else
+ r0_offset = ARM_NEW_RT_SIGFRAME_UCONTEXT;
+
+ r0_offset += ARM_UCONTEXT_SIGCONTEXT + ARM_SIGCONTEXT_R0;
+ }
+
+ pc_offset = r0_offset + INT_REGISTER_SIZE * ARM_PC_REGNUM;
+
+ return pc_offset;
+}
--- /dev/null
+/* Common target dependent code for GNU/Linux on ARM systems.
+
+ Copyright (C) 1999-2015 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#ifndef ARM_LINUX_H
+#define ARM_LINUX_H
+
+/* There are a couple of different possible stack layouts that
+ we need to support.
+
+ Before version 2.6.18, the kernel used completely independent
+ layouts for non-RT and RT signals. For non-RT signals the stack
+ began directly with a struct sigcontext. For RT signals the stack
+ began with two redundant pointers (to the siginfo and ucontext),
+ and then the siginfo and ucontext.
+
+ As of version 2.6.18, the non-RT signal frame layout starts with
+ a ucontext and the RT signal frame starts with a siginfo and then
+ a ucontext. Also, the ucontext now has a designated save area
+ for coprocessor registers.
+
+ For RT signals, it's easy to tell the difference: we look for
+ pinfo, the pointer to the siginfo. If it has the expected
+ value, we have an old layout. If it doesn't, we have the new
+ layout.
+
+ For non-RT signals, it's a bit harder. We need something in one
+ layout or the other with a recognizable offset and value. We can't
+ use the return trampoline, because ARM usually uses SA_RESTORER,
+ in which case the stack return trampoline is not filled in.
+ We can't use the saved stack pointer, because sigaltstack might
+ be in use. So for now we guess the new layout... */
+
+/* There are three words (trap_no, error_code, oldmask) in
+ struct sigcontext before r0. */
+#define ARM_SIGCONTEXT_R0 0xc
+
+/* There are five words (uc_flags, uc_link, and three for uc_stack)
+ in the ucontext_t before the sigcontext. */
+#define ARM_UCONTEXT_SIGCONTEXT 0x14
+
+/* There are three elements in an rt_sigframe before the ucontext:
+ pinfo, puc, and info. The first two are pointers and the third
+ is a struct siginfo, with size 128 bytes. We could follow puc
+ to the ucontext, but it's simpler to skip the whole thing. */
+#define ARM_OLD_RT_SIGFRAME_SIGINFO 0x8
+#define ARM_OLD_RT_SIGFRAME_UCONTEXT 0x88
+
+#define ARM_NEW_RT_SIGFRAME_UCONTEXT 0x80
+
+#define ARM_NEW_SIGFRAME_MAGIC 0x5ac3c35a
+
+int
+arm_linux_sigreturn_next_pc_offset (unsigned long sp,
+ unsigned long sp_data,
+ unsigned long svc_number,
+ int is_sigreturn);
+
+#endif /* ARM_LINUX_H */
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "common-defs.h"
+#include "common-regcache.h"
#include "arm.h"
/* See arm.h. */
}
return 1;
}
+
+
+/* See arm.h. */
+
+int
+thumb_advance_itstate (unsigned int itstate)
+{
+ /* Preserve IT[7:5], the first three bits of the condition. Shift
+ the upcoming condition flags left by one bit. */
+ itstate = (itstate & 0xe0) | ((itstate << 1) & 0x1f);
+
+ /* If we have finished the IT block, clear the state. */
+ if ((itstate & 0x0f) == 0)
+ itstate = 0;
+
+ return itstate;
+}
+
+/* See arm.h. */
+
+int
+arm_instruction_changes_pc (uint32_t this_instr)
+{
+ if (bits (this_instr, 28, 31) == INST_NV)
+ /* Unconditional instructions. */
+ switch (bits (this_instr, 24, 27))
+ {
+ case 0xa:
+ case 0xb:
+ /* Branch with Link and change to Thumb. */
+ return 1;
+ case 0xc:
+ case 0xd:
+ case 0xe:
+ /* Coprocessor register transfer. */
+ if (bits (this_instr, 12, 15) == 15)
+ error (_("Invalid update to pc in instruction"));
+ return 0;
+ default:
+ return 0;
+ }
+ else
+ switch (bits (this_instr, 25, 27))
+ {
+ case 0x0:
+ if (bits (this_instr, 23, 24) == 2 && bit (this_instr, 20) == 0)
+ {
+ /* Multiplies and extra load/stores. */
+ if (bit (this_instr, 4) == 1 && bit (this_instr, 7) == 1)
+ /* Neither multiplies nor extension load/stores are allowed
+ to modify PC. */
+ return 0;
+
+ /* Otherwise, miscellaneous instructions. */
+
+ /* BX <reg>, BXJ <reg>, BLX <reg> */
+ if (bits (this_instr, 4, 27) == 0x12fff1
+ || bits (this_instr, 4, 27) == 0x12fff2
+ || bits (this_instr, 4, 27) == 0x12fff3)
+ return 1;
+
+ /* Other miscellaneous instructions are unpredictable if they
+ modify PC. */
+ return 0;
+ }
+ /* Data processing instruction. Fall through. */
+
+ case 0x1:
+ if (bits (this_instr, 12, 15) == 15)
+ return 1;
+ else
+ return 0;
+
+ case 0x2:
+ case 0x3:
+ /* Media instructions and architecturally undefined instructions. */
+ if (bits (this_instr, 25, 27) == 3 && bit (this_instr, 4) == 1)
+ return 0;
+
+ /* Stores. */
+ if (bit (this_instr, 20) == 0)
+ return 0;
+
+ /* Loads. */
+ if (bits (this_instr, 12, 15) == ARM_PC_REGNUM)
+ return 1;
+ else
+ return 0;
+
+ case 0x4:
+ /* Load/store multiple. */
+ if (bit (this_instr, 20) == 1 && bit (this_instr, 15) == 1)
+ return 1;
+ else
+ return 0;
+
+ case 0x5:
+ /* Branch and branch with link. */
+ return 1;
+
+ case 0x6:
+ case 0x7:
+ /* Coprocessor transfers or SWIs can not affect PC. */
+ return 0;
+
+ default:
+ internal_error (__FILE__, __LINE__, _("bad value in switch"));
+ }
+}
+
+/* See arm.h. */
+
+int
+thumb_instruction_changes_pc (unsigned short inst)
+{
+ if ((inst & 0xff00) == 0xbd00) /* pop {rlist, pc} */
+ return 1;
+
+ if ((inst & 0xf000) == 0xd000) /* conditional branch */
+ return 1;
+
+ if ((inst & 0xf800) == 0xe000) /* unconditional branch */
+ return 1;
+
+ if ((inst & 0xff00) == 0x4700) /* bx REG, blx REG */
+ return 1;
+
+ if ((inst & 0xff87) == 0x4687) /* mov pc, REG */
+ return 1;
+
+ if ((inst & 0xf500) == 0xb100) /* CBNZ or CBZ. */
+ return 1;
+
+ return 0;
+}
+
+
+/* See arm.h. */
+
+int
+thumb2_instruction_changes_pc (unsigned short inst1, unsigned short inst2)
+{
+ if ((inst1 & 0xf800) == 0xf000 && (inst2 & 0x8000) == 0x8000)
+ {
+ /* Branches and miscellaneous control instructions. */
+
+ if ((inst2 & 0x1000) != 0 || (inst2 & 0xd001) == 0xc000)
+ {
+ /* B, BL, BLX. */
+ return 1;
+ }
+ else if (inst1 == 0xf3de && (inst2 & 0xff00) == 0x3f00)
+ {
+ /* SUBS PC, LR, #imm8. */
+ return 1;
+ }
+ else if ((inst2 & 0xd000) == 0x8000 && (inst1 & 0x0380) != 0x0380)
+ {
+ /* Conditional branch. */
+ return 1;
+ }
+
+ return 0;
+ }
+
+ if ((inst1 & 0xfe50) == 0xe810)
+ {
+ /* Load multiple or RFE. */
+
+ if (bit (inst1, 7) && !bit (inst1, 8))
+ {
+ /* LDMIA or POP */
+ if (bit (inst2, 15))
+ return 1;
+ }
+ else if (!bit (inst1, 7) && bit (inst1, 8))
+ {
+ /* LDMDB */
+ if (bit (inst2, 15))
+ return 1;
+ }
+ else if (bit (inst1, 7) && bit (inst1, 8))
+ {
+ /* RFEIA */
+ return 1;
+ }
+ else if (!bit (inst1, 7) && !bit (inst1, 8))
+ {
+ /* RFEDB */
+ return 1;
+ }
+
+ return 0;
+ }
+
+ if ((inst1 & 0xffef) == 0xea4f && (inst2 & 0xfff0) == 0x0f00)
+ {
+ /* MOV PC or MOVS PC. */
+ return 1;
+ }
+
+ if ((inst1 & 0xff70) == 0xf850 && (inst2 & 0xf000) == 0xf000)
+ {
+ /* LDR PC. */
+ if (bits (inst1, 0, 3) == 15)
+ return 1;
+ if (bit (inst1, 7))
+ return 1;
+ if (bit (inst2, 11))
+ return 1;
+ if ((inst2 & 0x0fc0) == 0x0000)
+ return 1;
+
+ return 0;
+ }
+
+ if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf000)
+ {
+ /* TBB. */
+ return 1;
+ }
+
+ if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf010)
+ {
+ /* TBH. */
+ return 1;
+ }
+
+ return 0;
+}
+
+/* See arm.h. */
+
+unsigned long
+shifted_reg_val (struct regcache *regcache, unsigned long inst,
+ int carry, unsigned long pc_val, unsigned long status_reg)
+{
+ unsigned long res, shift;
+ int rm = bits (inst, 0, 3);
+ unsigned long shifttype = bits (inst, 5, 6);
+
+ if (bit (inst, 4))
+ {
+ int rs = bits (inst, 8, 11);
+ shift = (rs == 15
+ ? pc_val + 8
+ : regcache_raw_get_unsigned (regcache, rs)) & 0xFF;
+ }
+ else
+ shift = bits (inst, 7, 11);
+
+ res = (rm == ARM_PC_REGNUM
+ ? (pc_val + (bit (inst, 4) ? 12 : 8))
+ : regcache_raw_get_unsigned (regcache, rm));
+
+ switch (shifttype)
+ {
+ case 0: /* LSL */
+ res = shift >= 32 ? 0 : res << shift;
+ break;
+
+ case 1: /* LSR */
+ res = shift >= 32 ? 0 : res >> shift;
+ break;
+
+ case 2: /* ASR */
+ if (shift >= 32)
+ shift = 31;
+ res = ((res & 0x80000000L)
+ ? ~((~res) >> shift) : res >> shift);
+ break;
+
+ case 3: /* ROR/RRX */
+ shift &= 31;
+ if (shift == 0)
+ res = (res >> 1) | (carry ? 0x80000000L : 0);
+ else
+ res = (res >> shift) | (res << (32 - shift));
+ break;
+ }
+
+ return res & 0xffffffff;
+}
#define MAKE_THUMB_ADDR(addr) ((addr) | 1)
#define UNMAKE_THUMB_ADDR(addr) ((addr) & ~1)
+/* Support routines for instruction parsing. */
+#define submask(x) ((1L << ((x) + 1)) - 1)
+#define bits(obj,st,fn) (((obj) >> (st)) & submask ((fn) - (st)))
+#define bit(obj,st) (((obj) >> (st)) & 1)
+#define sbits(obj,st,fn) \
+ ((long) (bits(obj,st,fn) | ((long) bit(obj,fn) * ~ submask (fn - st))))
+#define BranchDest(addr,instr) \
+ ((CORE_ADDR) (((unsigned long) (addr)) + 8 + (sbits (instr, 0, 23) << 2)))
+
+/* Forward declaration. */
+struct regcache;
+
/* Return the size in bytes of the complete Thumb instruction whose
first halfword is INST1. */
int thumb_insn_size (unsigned short inst1);
/* Return number of 1-bits in VAL. */
int bitcount (unsigned long val);
+/* Return 1 if THIS_INSTR might change control flow, 0 otherwise. */
+int arm_instruction_changes_pc (uint32_t this_instr);
+
+/* Return 1 if the 16-bit Thumb instruction INST might change
+ control flow, 0 otherwise. */
+int thumb_instruction_changes_pc (unsigned short inst);
+
+/* Return 1 if the 32-bit Thumb instruction in INST1 and INST2
+ might change control flow, 0 otherwise. */
+int thumb2_instruction_changes_pc (unsigned short inst1, unsigned short inst2);
+
+/* Advance the state of the IT block and return that state. */
+int thumb_advance_itstate (unsigned int itstate);
+
+/* Decode shifted register value. */
+
+unsigned long shifted_reg_val (struct regcache *regcache,
+ unsigned long inst,
+ int carry,
+ unsigned long pc_val,
+ unsigned long status_reg);
+
#endif
#include "auxv.h"
#include "xml-syscall.h"
+#include "arch/arm.h"
+#include "arch/arm-get-next-pcs.h"
+#include "arch/arm-linux.h"
#include "arm-tdep.h"
#include "arm-linux-tdep.h"
#include "linux-tdep.h"
/* Syscall number for rt_sigreturn. */
#define ARM_RT_SIGRETURN 173
+/* Operation function pointers for get_next_pcs. */
+static struct arm_get_next_pcs_ops arm_linux_get_next_pcs_ops = {
+ arm_get_next_pcs_read_memory_unsigned_integer,
+ arm_get_next_pcs_syscall_next_pc,
+ arm_get_next_pcs_addr_bits_remove,
+ arm_get_next_pcs_is_thumb
+};
+
static void
arm_linux_sigtramp_cache (struct frame_info *this_frame,
struct trad_frame_cache *this_cache,
trad_frame_set_id (this_cache, frame_id_build (sp, func));
}
-/* There are a couple of different possible stack layouts that
- we need to support.
-
- Before version 2.6.18, the kernel used completely independent
- layouts for non-RT and RT signals. For non-RT signals the stack
- began directly with a struct sigcontext. For RT signals the stack
- began with two redundant pointers (to the siginfo and ucontext),
- and then the siginfo and ucontext.
-
- As of version 2.6.18, the non-RT signal frame layout starts with
- a ucontext and the RT signal frame starts with a siginfo and then
- a ucontext. Also, the ucontext now has a designated save area
- for coprocessor registers.
-
- For RT signals, it's easy to tell the difference: we look for
- pinfo, the pointer to the siginfo. If it has the expected
- value, we have an old layout. If it doesn't, we have the new
- layout.
-
- For non-RT signals, it's a bit harder. We need something in one
- layout or the other with a recognizable offset and value. We can't
- use the return trampoline, because ARM usually uses SA_RESTORER,
- in which case the stack return trampoline is not filled in.
- We can't use the saved stack pointer, because sigaltstack might
- be in use. So for now we guess the new layout... */
-
-/* There are three words (trap_no, error_code, oldmask) in
- struct sigcontext before r0. */
-#define ARM_SIGCONTEXT_R0 0xc
-
-/* There are five words (uc_flags, uc_link, and three for uc_stack)
- in the ucontext_t before the sigcontext. */
-#define ARM_UCONTEXT_SIGCONTEXT 0x14
-
-/* There are three elements in an rt_sigframe before the ucontext:
- pinfo, puc, and info. The first two are pointers and the third
- is a struct siginfo, with size 128 bytes. We could follow puc
- to the ucontext, but it's simpler to skip the whole thing. */
-#define ARM_OLD_RT_SIGFRAME_SIGINFO 0x8
-#define ARM_OLD_RT_SIGFRAME_UCONTEXT 0x88
-
-#define ARM_NEW_RT_SIGFRAME_UCONTEXT 0x80
-
-#define ARM_NEW_SIGFRAME_MAGIC 0x5ac3c35a
-
+/* See arm-linux.h for stack layout details. */
static void
arm_linux_sigreturn_init (const struct tramp_frame *self,
struct frame_info *this_frame,
return 0;
}
-/* Calculate the offset from stack pointer of the pc register on the stack
- in the case of a sigreturn or sigreturn_rt syscall. */
-static int
-arm_linux_sigreturn_next_pc_offset (unsigned long sp,
- unsigned long sp_data,
- unsigned long svc_number,
- int is_sigreturn)
-{
- /* Offset of R0 register. */
- int r0_offset = 0;
- /* Offset of PC register. */
- int pc_offset = 0;
-
- if (is_sigreturn)
- {
- if (sp_data == ARM_NEW_SIGFRAME_MAGIC)
- r0_offset = ARM_UCONTEXT_SIGCONTEXT + ARM_SIGCONTEXT_R0;
- else
- r0_offset = ARM_SIGCONTEXT_R0;
- }
- else
- {
- if (sp_data == sp + ARM_OLD_RT_SIGFRAME_SIGINFO)
- r0_offset = ARM_OLD_RT_SIGFRAME_UCONTEXT;
- else
- r0_offset = ARM_NEW_RT_SIGFRAME_UCONTEXT;
-
- r0_offset += ARM_UCONTEXT_SIGCONTEXT + ARM_SIGCONTEXT_R0;
- }
-
- pc_offset = r0_offset + INT_REGISTER_SIZE * ARM_PC_REGNUM;
-
- return pc_offset;
-}
-
/* Find the value of the next PC after a sigreturn or rt_sigreturn syscall
based on current processor state. */
static CORE_ADDR
struct regcache *regcache = get_current_regcache ();
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct address_space *aspace = get_regcache_aspace (regcache);
-
- CORE_ADDR next_pc;
-
- if (arm_deal_with_atomic_sequence (regcache))
- return 1;
+ struct arm_get_next_pcs next_pcs_ctx;
+ CORE_ADDR pc;
+ int i;
+ VEC (CORE_ADDR) *next_pcs = NULL;
+ struct cleanup *old_chain = make_cleanup (VEC_cleanup (CORE_ADDR), &next_pcs);
/* If the target does have hardware single step, GDB doesn't have
to bother software single step. */
if (target_can_do_single_step () == 1)
return 0;
- next_pc = arm_get_next_pc (regcache, regcache_read_pc (regcache));
+ arm_get_next_pcs_ctor (&next_pcs_ctx,
+ &arm_linux_get_next_pcs_ops,
+ gdbarch_byte_order (gdbarch),
+ gdbarch_byte_order_for_code (gdbarch),
+ gdbarch_tdep (gdbarch)->thumb2_breakpoint,
+ regcache);
+
+ next_pcs = arm_get_next_pcs (&next_pcs_ctx, regcache_read_pc (regcache));
- /* The Linux kernel offers some user-mode helpers in a high page. We can
- not read this page (as of 2.6.23), and even if we could then we couldn't
- set breakpoints in it, and even if we could then the atomic operations
- would fail when interrupted. They are all called as functions and return
- to the address in LR, so step to there instead. */
- if (next_pc > 0xffff0000)
- next_pc = get_frame_register_unsigned (frame, ARM_LR_REGNUM);
+ for (i = 0; VEC_iterate (CORE_ADDR, next_pcs, i, pc); i++)
+ {
+ /* The Linux kernel offers some user-mode helpers in a high page. We can
+ not read this page (as of 2.6.23), and even if we could then we
+ couldn't set breakpoints in it, and even if we could then the atomic
+ operations would fail when interrupted. They are all called as
+ functions and return to the address in LR, so step to there
+ instead. */
+ if (pc > 0xffff0000)
+ pc = get_frame_register_unsigned (frame, ARM_LR_REGNUM);
+
+ arm_insert_single_step_breakpoint (gdbarch, aspace, pc);
+ }
- arm_insert_single_step_breakpoint (gdbarch, aspace, next_pc);
+ do_cleanups (old_chain);
return 1;
}
#include "observer.h"
#include "arch/arm.h"
+#include "arch/arm-get-next-pcs.h"
#include "arm-tdep.h"
#include "gdb/sim-arm.h"
struct regcache *regcache,
int regnum, const gdb_byte *buf);
+/* get_next_pcs operations. */
+static struct arm_get_next_pcs_ops arm_get_next_pcs_ops = {
+ arm_get_next_pcs_read_memory_unsigned_integer,
+ arm_get_next_pcs_syscall_next_pc,
+ arm_get_next_pcs_addr_bits_remove,
+ arm_get_next_pcs_is_thumb
+};
+
struct arm_prologue_cache
{
/* The stack pointer at the time this frame was created; i.e. the
return 0;
}
-/* Support routines for instruction parsing. */
-#define submask(x) ((1L << ((x) + 1)) - 1)
-#define bit(obj,st) (((obj) >> (st)) & 1)
-#define bits(obj,st,fn) (((obj) >> (st)) & submask ((fn) - (st)))
-#define sbits(obj,st,fn) \
- ((long) (bits(obj,st,fn) | ((long) bit(obj,fn) * ~ submask (fn - st))))
-#define BranchDest(addr,instr) \
- ((CORE_ADDR) (((unsigned long) (addr)) + 8 + (sbits (instr, 0, 23) << 2)))
-
/* Extract the immediate from instruction movw/movt of encoding T. INSN1 is
the first 16-bit of instruction, and INSN2 is the second 16-bit of
instruction. */
return (0x80 | (imm & 0x7f)) << (32 - count);
}
-/* Return 1 if the 16-bit Thumb instruction INST might change
- control flow, 0 otherwise. */
-
-static int
-thumb_instruction_changes_pc (unsigned short inst)
-{
- if ((inst & 0xff00) == 0xbd00) /* pop {rlist, pc} */
- return 1;
-
- if ((inst & 0xf000) == 0xd000) /* conditional branch */
- return 1;
-
- if ((inst & 0xf800) == 0xe000) /* unconditional branch */
- return 1;
-
- if ((inst & 0xff00) == 0x4700) /* bx REG, blx REG */
- return 1;
-
- if ((inst & 0xff87) == 0x4687) /* mov pc, REG */
- return 1;
-
- if ((inst & 0xf500) == 0xb100) /* CBNZ or CBZ. */
- return 1;
-
- return 0;
-}
-
-/* Return 1 if the 32-bit Thumb instruction in INST1 and INST2
- might change control flow, 0 otherwise. */
-
-static int
-thumb2_instruction_changes_pc (unsigned short inst1, unsigned short inst2)
-{
- if ((inst1 & 0xf800) == 0xf000 && (inst2 & 0x8000) == 0x8000)
- {
- /* Branches and miscellaneous control instructions. */
-
- if ((inst2 & 0x1000) != 0 || (inst2 & 0xd001) == 0xc000)
- {
- /* B, BL, BLX. */
- return 1;
- }
- else if (inst1 == 0xf3de && (inst2 & 0xff00) == 0x3f00)
- {
- /* SUBS PC, LR, #imm8. */
- return 1;
- }
- else if ((inst2 & 0xd000) == 0x8000 && (inst1 & 0x0380) != 0x0380)
- {
- /* Conditional branch. */
- return 1;
- }
-
- return 0;
- }
-
- if ((inst1 & 0xfe50) == 0xe810)
- {
- /* Load multiple or RFE. */
-
- if (bit (inst1, 7) && !bit (inst1, 8))
- {
- /* LDMIA or POP */
- if (bit (inst2, 15))
- return 1;
- }
- else if (!bit (inst1, 7) && bit (inst1, 8))
- {
- /* LDMDB */
- if (bit (inst2, 15))
- return 1;
- }
- else if (bit (inst1, 7) && bit (inst1, 8))
- {
- /* RFEIA */
- return 1;
- }
- else if (!bit (inst1, 7) && !bit (inst1, 8))
- {
- /* RFEDB */
- return 1;
- }
-
- return 0;
- }
-
- if ((inst1 & 0xffef) == 0xea4f && (inst2 & 0xfff0) == 0x0f00)
- {
- /* MOV PC or MOVS PC. */
- return 1;
- }
-
- if ((inst1 & 0xff70) == 0xf850 && (inst2 & 0xf000) == 0xf000)
- {
- /* LDR PC. */
- if (bits (inst1, 0, 3) == 15)
- return 1;
- if (bit (inst1, 7))
- return 1;
- if (bit (inst2, 11))
- return 1;
- if ((inst2 & 0x0fc0) == 0x0000)
- return 1;
-
- return 0;
- }
-
- if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf000)
- {
- /* TBB. */
- return 1;
- }
-
- if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf010)
- {
- /* TBH. */
- return 1;
- }
-
- return 0;
-}
-
/* Return 1 if the 16-bit Thumb instruction INSN restores SP in
epilogue, 0 otherwise. */
thumb_analyze_prologue (gdbarch, prologue_start, prologue_end, cache);
}
-/* Return 1 if THIS_INSTR might change control flow, 0 otherwise. */
-
-static int
-arm_instruction_changes_pc (uint32_t this_instr)
-{
- if (bits (this_instr, 28, 31) == INST_NV)
- /* Unconditional instructions. */
- switch (bits (this_instr, 24, 27))
- {
- case 0xa:
- case 0xb:
- /* Branch with Link and change to Thumb. */
- return 1;
- case 0xc:
- case 0xd:
- case 0xe:
- /* Coprocessor register transfer. */
- if (bits (this_instr, 12, 15) == 15)
- error (_("Invalid update to pc in instruction"));
- return 0;
- default:
- return 0;
- }
- else
- switch (bits (this_instr, 25, 27))
- {
- case 0x0:
- if (bits (this_instr, 23, 24) == 2 && bit (this_instr, 20) == 0)
- {
- /* Multiplies and extra load/stores. */
- if (bit (this_instr, 4) == 1 && bit (this_instr, 7) == 1)
- /* Neither multiplies nor extension load/stores are allowed
- to modify PC. */
- return 0;
-
- /* Otherwise, miscellaneous instructions. */
-
- /* BX <reg>, BXJ <reg>, BLX <reg> */
- if (bits (this_instr, 4, 27) == 0x12fff1
- || bits (this_instr, 4, 27) == 0x12fff2
- || bits (this_instr, 4, 27) == 0x12fff3)
- return 1;
-
- /* Other miscellaneous instructions are unpredictable if they
- modify PC. */
- return 0;
- }
- /* Data processing instruction. Fall through. */
-
- case 0x1:
- if (bits (this_instr, 12, 15) == 15)
- return 1;
- else
- return 0;
-
- case 0x2:
- case 0x3:
- /* Media instructions and architecturally undefined instructions. */
- if (bits (this_instr, 25, 27) == 3 && bit (this_instr, 4) == 1)
- return 0;
-
- /* Stores. */
- if (bit (this_instr, 20) == 0)
- return 0;
-
- /* Loads. */
- if (bits (this_instr, 12, 15) == ARM_PC_REGNUM)
- return 1;
- else
- return 0;
-
- case 0x4:
- /* Load/store multiple. */
- if (bit (this_instr, 20) == 1 && bit (this_instr, 15) == 1)
- return 1;
- else
- return 0;
-
- case 0x5:
- /* Branch and branch with link. */
- return 1;
-
- case 0x6:
- case 0x7:
- /* Coprocessor transfers or SWIs can not affect PC. */
- return 0;
-
- default:
- internal_error (__FILE__, __LINE__, _("bad value in switch"));
- }
-}
-
/* Return 1 if the ARM instruction INSN restores SP in epilogue, 0
otherwise. */
/* We also assume exception information is valid if we're currently
blocked in a system call. The system library is supposed to
- ensure this, so that e.g. pthread cancellation works.
-
- But before verifying the instruction at the point of call, make
- sure this_frame is actually making a call (or, said differently,
- that it is not the innermost frame). For that, we compare
- this_frame's PC vs this_frame's addr_in_block. If equal, it means
- there is no call (otherwise, the PC would be the return address,
- which is the instruction after the call). */
-
- if (get_frame_pc (this_frame) != addr_in_block)
+ ensure this, so that e.g. pthread cancellation works. */
+ if (arm_frame_is_thumb (this_frame))
{
- if (arm_frame_is_thumb (this_frame))
- {
- LONGEST insn;
-
- if (safe_read_memory_integer (get_frame_pc (this_frame) - 2, 2,
- byte_order_for_code, &insn)
- && (insn & 0xff00) == 0xdf00 /* svc */)
- exc_valid = 1;
- }
- else
- {
- LONGEST insn;
+ LONGEST insn;
- if (safe_read_memory_integer (get_frame_pc (this_frame) - 4, 4,
- byte_order_for_code, &insn)
- && (insn & 0x0f000000) == 0x0f000000 /* svc */)
- exc_valid = 1;
- }
+ if (safe_read_memory_integer (get_frame_pc (this_frame) - 2, 2,
+ byte_order_for_code, &insn)
+ && (insn & 0xff00) == 0xdf00 /* svc */)
+ exc_valid = 1;
}
+ else
+ {
+ LONGEST insn;
+ if (safe_read_memory_integer (get_frame_pc (this_frame) - 4, 4,
+ byte_order_for_code, &insn)
+ && (insn & 0x0f000000) == 0x0f000000 /* svc */)
+ exc_valid = 1;
+ }
+
/* Bail out if we don't know that exception information is valid. */
if (!exc_valid)
return 0;
&d, dbl);
}
-static unsigned long
-shifted_reg_val (struct regcache *regcache, unsigned long inst, int carry,
- unsigned long pc_val, unsigned long status_reg)
+/* Like insert_single_step_breakpoint, but make sure we use a breakpoint
+ of the appropriate mode (as encoded in the PC value), even if this
+ differs from what would be expected according to the symbol tables. */
+
+void
+arm_insert_single_step_breakpoint (struct gdbarch *gdbarch,
+ struct address_space *aspace,
+ CORE_ADDR pc)
{
- unsigned long res, shift;
- int rm = bits (inst, 0, 3);
- unsigned long shifttype = bits (inst, 5, 6);
+ struct cleanup *old_chain
+ = make_cleanup_restore_integer (&arm_override_mode);
- if (bit (inst, 4))
- {
- int rs = bits (inst, 8, 11);
- shift = (rs == 15 ? pc_val + 8
- : regcache_raw_get_unsigned (regcache, rs)) & 0xFF;
- }
- else
- shift = bits (inst, 7, 11);
+ arm_override_mode = IS_THUMB_ADDR (pc);
+ pc = gdbarch_addr_bits_remove (gdbarch, pc);
- res = (rm == ARM_PC_REGNUM
- ? (pc_val + (bit (inst, 4) ? 12 : 8))
- : regcache_raw_get_unsigned (regcache, rm));
+ insert_single_step_breakpoint (gdbarch, aspace, pc);
- switch (shifttype)
- {
- case 0: /* LSL */
- res = shift >= 32 ? 0 : res << shift;
- break;
+ do_cleanups (old_chain);
+}
- case 1: /* LSR */
- res = shift >= 32 ? 0 : res >> shift;
- break;
+/* Given BUF, which is OLD_LEN bytes ending at ENDADDR, expand
+ the buffer to be NEW_LEN bytes ending at ENDADDR. Return
+ NULL if an error occurs. BUF is freed. */
- case 2: /* ASR */
- if (shift >= 32)
- shift = 31;
- res = ((res & 0x80000000L)
- ? ~((~res) >> shift) : res >> shift);
- break;
+static gdb_byte *
+extend_buffer_earlier (gdb_byte *buf, CORE_ADDR endaddr,
+ int old_len, int new_len)
+{
+ gdb_byte *new_buf;
+ int bytes_to_read = new_len - old_len;
- case 3: /* ROR/RRX */
- shift &= 31;
- if (shift == 0)
- res = (res >> 1) | (carry ? 0x80000000L : 0);
- else
- res = (res >> shift) | (res << (32 - shift));
- break;
+ new_buf = (gdb_byte *) xmalloc (new_len);
+ memcpy (new_buf + bytes_to_read, buf, old_len);
+ xfree (buf);
+ if (target_read_memory (endaddr - new_len, new_buf, bytes_to_read) != 0)
+ {
+ xfree (new_buf);
+ return NULL;
}
-
- return res & 0xffffffff;
+ return new_buf;
}
-static int
-thumb_advance_itstate (unsigned int itstate)
-{
- /* Preserve IT[7:5], the first three bits of the condition. Shift
- the upcoming condition flags left by one bit. */
- itstate = (itstate & 0xe0) | ((itstate << 1) & 0x1f);
-
- /* If we have finished the IT block, clear the state. */
- if ((itstate & 0x0f) == 0)
- itstate = 0;
-
- return itstate;
-}
+/* An IT block is at most the 2-byte IT instruction followed by
+ four 4-byte instructions. The furthest back we must search to
+ find an IT block that affects the current instruction is thus
+ 2 + 3 * 4 == 14 bytes. */
+#define MAX_IT_BLOCK_PREFIX 14
-/* Find the next PC after the current instruction executes. In some
- cases we can not statically determine the answer (see the IT state
- handling in this function); in that case, a breakpoint may be
- inserted in addition to the returned PC, which will be used to set
- another breakpoint by our caller. */
+/* Use a quick scan if there are more than this many bytes of
+ code. */
+#define IT_SCAN_THRESHOLD 32
+/* Adjust a breakpoint's address to move breakpoints out of IT blocks.
+ A breakpoint in an IT block may not be hit, depending on the
+ condition flags. */
static CORE_ADDR
-thumb_get_next_pc_raw (struct regcache *regcache, CORE_ADDR pc)
+arm_adjust_breakpoint_address (struct gdbarch *gdbarch, CORE_ADDR bpaddr)
{
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
- struct address_space *aspace = get_regcache_aspace (regcache);
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- unsigned long pc_val = ((unsigned long) pc) + 4; /* PC after prefetch */
- unsigned short inst1;
- CORE_ADDR nextpc = pc + 2; /* Default is next instruction. */
- unsigned long offset;
- ULONGEST status, itstate;
-
- nextpc = MAKE_THUMB_ADDR (nextpc);
- pc_val = MAKE_THUMB_ADDR (pc_val);
-
- inst1 = read_memory_unsigned_integer (pc, 2, byte_order_for_code);
-
- /* Thumb-2 conditional execution support. There are eight bits in
- the CPSR which describe conditional execution state. Once
- reconstructed (they're in a funny order), the low five bits
- describe the low bit of the condition for each instruction and
- how many instructions remain. The high three bits describe the
- base condition. One of the low four bits will be set if an IT
- block is active. These bits read as zero on earlier
- processors. */
- status = regcache_raw_get_unsigned (regcache, ARM_PS_REGNUM);
- itstate = ((status >> 8) & 0xfc) | ((status >> 25) & 0x3);
-
- /* If-Then handling. On GNU/Linux, where this routine is used, we
- use an undefined instruction as a breakpoint. Unlike BKPT, IT
- can disable execution of the undefined instruction. So we might
- miss the breakpoint if we set it on a skipped conditional
- instruction. Because conditional instructions can change the
- flags, affecting the execution of further instructions, we may
- need to set two breakpoints. */
-
- if (gdbarch_tdep (gdbarch)->thumb2_breakpoint != NULL)
- {
- if ((inst1 & 0xff00) == 0xbf00 && (inst1 & 0x000f) != 0)
- {
- /* An IT instruction. Because this instruction does not
- modify the flags, we can accurately predict the next
- executed instruction. */
- itstate = inst1 & 0x00ff;
- pc += thumb_insn_size (inst1);
-
- while (itstate != 0 && ! condition_true (itstate >> 4, status))
- {
- inst1 = read_memory_unsigned_integer (pc, 2,
- byte_order_for_code);
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
- }
-
- return MAKE_THUMB_ADDR (pc);
- }
- else if (itstate != 0)
- {
- /* We are in a conditional block. Check the condition. */
- if (! condition_true (itstate >> 4, status))
- {
- /* Advance to the next executed instruction. */
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
+ gdb_byte *buf;
+ char map_type;
+ CORE_ADDR boundary, func_start;
+ int buf_len;
+ enum bfd_endian order = gdbarch_byte_order_for_code (gdbarch);
+ int i, any, last_it, last_it_count;
- while (itstate != 0 && ! condition_true (itstate >> 4, status))
- {
- inst1 = read_memory_unsigned_integer (pc, 2,
- byte_order_for_code);
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
- }
+ /* If we are using BKPT breakpoints, none of this is necessary. */
+ if (gdbarch_tdep (gdbarch)->thumb2_breakpoint == NULL)
+ return bpaddr;
- return MAKE_THUMB_ADDR (pc);
- }
- else if ((itstate & 0x0f) == 0x08)
- {
- /* This is the last instruction of the conditional
- block, and it is executed. We can handle it normally
- because the following instruction is not conditional,
- and we must handle it normally because it is
- permitted to branch. Fall through. */
- }
- else
- {
- int cond_negated;
-
- /* There are conditional instructions after this one.
- If this instruction modifies the flags, then we can
- not predict what the next executed instruction will
- be. Fortunately, this instruction is architecturally
- forbidden to branch; we know it will fall through.
- Start by skipping past it. */
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
-
- /* Set a breakpoint on the following instruction. */
- gdb_assert ((itstate & 0x0f) != 0);
- arm_insert_single_step_breakpoint (gdbarch, aspace,
- MAKE_THUMB_ADDR (pc));
- cond_negated = (itstate >> 4) & 1;
-
- /* Skip all following instructions with the same
- condition. If there is a later instruction in the IT
- block with the opposite condition, set the other
- breakpoint there. If not, then set a breakpoint on
- the instruction after the IT block. */
- do
- {
- inst1 = read_memory_unsigned_integer (pc, 2,
- byte_order_for_code);
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
- }
- while (itstate != 0 && ((itstate >> 4) & 1) == cond_negated);
+ /* ARM mode does not have this problem. */
+ if (!arm_pc_is_thumb (gdbarch, bpaddr))
+ return bpaddr;
- return MAKE_THUMB_ADDR (pc);
- }
- }
- }
- else if (itstate & 0x0f)
- {
- /* We are in a conditional block. Check the condition. */
- int cond = itstate >> 4;
+ /* We are setting a breakpoint in Thumb code that could potentially
+ contain an IT block. The first step is to find how much Thumb
+ code there is; we do not need to read outside of known Thumb
+ sequences. */
+ map_type = arm_find_mapping_symbol (bpaddr, &boundary);
+ if (map_type == 0)
+ /* Thumb-2 code must have mapping symbols to have a chance. */
+ return bpaddr;
- if (! condition_true (cond, status))
- /* Advance to the next instruction. All the 32-bit
- instructions share a common prefix. */
- return MAKE_THUMB_ADDR (pc + thumb_insn_size (inst1));
+ bpaddr = gdbarch_addr_bits_remove (gdbarch, bpaddr);
- /* Otherwise, handle the instruction normally. */
- }
+ if (find_pc_partial_function (bpaddr, NULL, &func_start, NULL)
+ && func_start > boundary)
+ boundary = func_start;
- if ((inst1 & 0xff00) == 0xbd00) /* pop {rlist, pc} */
- {
- CORE_ADDR sp;
+ /* Search for a candidate IT instruction. We have to do some fancy
+ footwork to distinguish a real IT instruction from the second
+ half of a 32-bit instruction, but there is no need for that if
+ there's no candidate. */
+ buf_len = min (bpaddr - boundary, MAX_IT_BLOCK_PREFIX);
+ if (buf_len == 0)
+ /* No room for an IT instruction. */
+ return bpaddr;
- /* Fetch the saved PC from the stack. It's stored above
- all of the other registers. */
- offset = bitcount (bits (inst1, 0, 7)) * INT_REGISTER_SIZE;
- sp = regcache_raw_get_unsigned (regcache, ARM_SP_REGNUM);
- nextpc = read_memory_unsigned_integer (sp + offset, 4, byte_order);
- }
- else if ((inst1 & 0xf000) == 0xd000) /* conditional branch */
+ buf = (gdb_byte *) xmalloc (buf_len);
+ if (target_read_memory (bpaddr - buf_len, buf, buf_len) != 0)
+ return bpaddr;
+ any = 0;
+ for (i = 0; i < buf_len; i += 2)
{
- unsigned long cond = bits (inst1, 8, 11);
- if (cond == 0x0f) /* 0x0f = SWI */
+ unsigned short inst1 = extract_unsigned_integer (&buf[i], 2, order);
+ if ((inst1 & 0xff00) == 0xbf00 && (inst1 & 0x000f) != 0)
{
- struct gdbarch_tdep *tdep;
- tdep = gdbarch_tdep (gdbarch);
-
- if (tdep->syscall_next_pc != NULL)
- nextpc = tdep->syscall_next_pc (regcache);
-
+ any = 1;
+ break;
}
- else if (cond != 0x0f && condition_true (cond, status))
- nextpc = pc_val + (sbits (inst1, 0, 7) << 1);
}
- else if ((inst1 & 0xf800) == 0xe000) /* unconditional branch */
- {
- nextpc = pc_val + (sbits (inst1, 0, 10) << 1);
- }
- else if (thumb_insn_size (inst1) == 4) /* 32-bit instruction */
- {
- unsigned short inst2;
- inst2 = read_memory_unsigned_integer (pc + 2, 2, byte_order_for_code);
-
- /* Default to the next instruction. */
- nextpc = pc + 4;
- nextpc = MAKE_THUMB_ADDR (nextpc);
-
- if ((inst1 & 0xf800) == 0xf000 && (inst2 & 0x8000) == 0x8000)
- {
- /* Branches and miscellaneous control instructions. */
-
- if ((inst2 & 0x1000) != 0 || (inst2 & 0xd001) == 0xc000)
- {
- /* B, BL, BLX. */
- int j1, j2, imm1, imm2;
-
- imm1 = sbits (inst1, 0, 10);
- imm2 = bits (inst2, 0, 10);
- j1 = bit (inst2, 13);
- j2 = bit (inst2, 11);
-
- offset = ((imm1 << 12) + (imm2 << 1));
- offset ^= ((!j2) << 22) | ((!j1) << 23);
-
- nextpc = pc_val + offset;
- /* For BLX make sure to clear the low bits. */
- if (bit (inst2, 12) == 0)
- nextpc = nextpc & 0xfffffffc;
- }
- else if (inst1 == 0xf3de && (inst2 & 0xff00) == 0x3f00)
- {
- /* SUBS PC, LR, #imm8. */
- nextpc = regcache_raw_get_unsigned (regcache, ARM_LR_REGNUM);
- nextpc -= inst2 & 0x00ff;
- }
- else if ((inst2 & 0xd000) == 0x8000 && (inst1 & 0x0380) != 0x0380)
- {
- /* Conditional branch. */
- if (condition_true (bits (inst1, 6, 9), status))
- {
- int sign, j1, j2, imm1, imm2;
-
- sign = sbits (inst1, 10, 10);
- imm1 = bits (inst1, 0, 5);
- imm2 = bits (inst2, 0, 10);
- j1 = bit (inst2, 13);
- j2 = bit (inst2, 11);
-
- offset = (sign << 20) + (j2 << 19) + (j1 << 18);
- offset += (imm1 << 12) + (imm2 << 1);
-
- nextpc = pc_val + offset;
- }
- }
- }
- else if ((inst1 & 0xfe50) == 0xe810)
- {
- /* Load multiple or RFE. */
- int rn, offset, load_pc = 1;
-
- rn = bits (inst1, 0, 3);
- if (bit (inst1, 7) && !bit (inst1, 8))
- {
- /* LDMIA or POP */
- if (!bit (inst2, 15))
- load_pc = 0;
- offset = bitcount (inst2) * 4 - 4;
- }
- else if (!bit (inst1, 7) && bit (inst1, 8))
- {
- /* LDMDB */
- if (!bit (inst2, 15))
- load_pc = 0;
- offset = -4;
- }
- else if (bit (inst1, 7) && bit (inst1, 8))
- {
- /* RFEIA */
- offset = 0;
- }
- else if (!bit (inst1, 7) && !bit (inst1, 8))
- {
- /* RFEDB */
- offset = -8;
- }
- else
- load_pc = 0;
-
- if (load_pc)
- {
- CORE_ADDR addr = regcache_raw_get_unsigned (regcache, rn);
- nextpc = read_memory_unsigned_integer (addr + offset, 4,
- byte_order);
- }
- }
- else if ((inst1 & 0xffef) == 0xea4f && (inst2 & 0xfff0) == 0x0f00)
- {
- /* MOV PC or MOVS PC. */
- nextpc = regcache_raw_get_unsigned (regcache, bits (inst2, 0, 3));
- nextpc = MAKE_THUMB_ADDR (nextpc);
- }
- else if ((inst1 & 0xff70) == 0xf850 && (inst2 & 0xf000) == 0xf000)
- {
- /* LDR PC. */
- CORE_ADDR base;
- int rn, load_pc = 1;
-
- rn = bits (inst1, 0, 3);
- base = regcache_raw_get_unsigned (regcache, rn);
- if (rn == ARM_PC_REGNUM)
- {
- base = (base + 4) & ~(CORE_ADDR) 0x3;
- if (bit (inst1, 7))
- base += bits (inst2, 0, 11);
- else
- base -= bits (inst2, 0, 11);
- }
- else if (bit (inst1, 7))
- base += bits (inst2, 0, 11);
- else if (bit (inst2, 11))
- {
- if (bit (inst2, 10))
- {
- if (bit (inst2, 9))
- base += bits (inst2, 0, 7);
- else
- base -= bits (inst2, 0, 7);
- }
- }
- else if ((inst2 & 0x0fc0) == 0x0000)
- {
- int shift = bits (inst2, 4, 5), rm = bits (inst2, 0, 3);
- base += regcache_raw_get_unsigned (regcache, rm) << shift;
- }
- else
- /* Reserved. */
- load_pc = 0;
-
- if (load_pc)
- nextpc = read_memory_unsigned_integer (base, 4, byte_order);
- }
- else if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf000)
- {
- /* TBB. */
- CORE_ADDR tbl_reg, table, offset, length;
-
- tbl_reg = bits (inst1, 0, 3);
- if (tbl_reg == 0x0f)
- table = pc + 4; /* Regcache copy of PC isn't right yet. */
- else
- table = regcache_raw_get_unsigned (regcache, tbl_reg);
-
- offset = regcache_raw_get_unsigned (regcache, bits (inst2, 0, 3));
- length = 2 * read_memory_unsigned_integer (table + offset, 1,
- byte_order);
- nextpc = pc_val + length;
- }
- else if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf010)
- {
- /* TBH. */
- CORE_ADDR tbl_reg, table, offset, length;
-
- tbl_reg = bits (inst1, 0, 3);
- if (tbl_reg == 0x0f)
- table = pc + 4; /* Regcache copy of PC isn't right yet. */
- else
- table = regcache_raw_get_unsigned (regcache, tbl_reg);
-
- offset = 2 * regcache_raw_get_unsigned (regcache, bits (inst2, 0, 3));
- length = 2 * read_memory_unsigned_integer (table + offset, 2,
- byte_order);
- nextpc = pc_val + length;
- }
- }
- else if ((inst1 & 0xff00) == 0x4700) /* bx REG, blx REG */
- {
- if (bits (inst1, 3, 6) == 0x0f)
- nextpc = UNMAKE_THUMB_ADDR (pc_val);
- else
- nextpc = regcache_raw_get_unsigned (regcache, bits (inst1, 3, 6));
- }
- else if ((inst1 & 0xff87) == 0x4687) /* mov pc, REG */
- {
- if (bits (inst1, 3, 6) == 0x0f)
- nextpc = pc_val;
- else
- nextpc = regcache_raw_get_unsigned (regcache, bits (inst1, 3, 6));
-
- nextpc = MAKE_THUMB_ADDR (nextpc);
- }
- else if ((inst1 & 0xf500) == 0xb100)
- {
- /* CBNZ or CBZ. */
- int imm = (bit (inst1, 9) << 6) + (bits (inst1, 3, 7) << 1);
- ULONGEST reg = regcache_raw_get_unsigned (regcache, bits (inst1, 0, 2));
-
- if (bit (inst1, 11) && reg != 0)
- nextpc = pc_val + imm;
- else if (!bit (inst1, 11) && reg == 0)
- nextpc = pc_val + imm;
- }
- return nextpc;
-}
-
-/* Get the raw next address. PC is the current program counter, in
- FRAME, which is assumed to be executing in ARM mode.
-
- The value returned has the execution state of the next instruction
- encoded in it. Use IS_THUMB_ADDR () to see whether the instruction is
- in Thumb-State, and gdbarch_addr_bits_remove () to get the plain memory
- address. */
-
-static CORE_ADDR
-arm_get_next_pc_raw (struct regcache *regcache, CORE_ADDR pc)
-{
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- unsigned long pc_val;
- unsigned long this_instr;
- unsigned long status;
- CORE_ADDR nextpc;
-
- pc_val = (unsigned long) pc;
- this_instr = read_memory_unsigned_integer (pc, 4, byte_order_for_code);
-
- status = regcache_raw_get_unsigned (regcache, ARM_PS_REGNUM);
- nextpc = (CORE_ADDR) (pc_val + 4); /* Default case */
-
- if (bits (this_instr, 28, 31) == INST_NV)
- switch (bits (this_instr, 24, 27))
- {
- case 0xa:
- case 0xb:
- {
- /* Branch with Link and change to Thumb. */
- nextpc = BranchDest (pc, this_instr);
- nextpc |= bit (this_instr, 24) << 1;
- nextpc = MAKE_THUMB_ADDR (nextpc);
- break;
- }
- case 0xc:
- case 0xd:
- case 0xe:
- /* Coprocessor register transfer. */
- if (bits (this_instr, 12, 15) == 15)
- error (_("Invalid update to pc in instruction"));
- break;
- }
- else if (condition_true (bits (this_instr, 28, 31), status))
- {
- switch (bits (this_instr, 24, 27))
- {
- case 0x0:
- case 0x1: /* data processing */
- case 0x2:
- case 0x3:
- {
- unsigned long operand1, operand2, result = 0;
- unsigned long rn;
- int c;
-
- if (bits (this_instr, 12, 15) != 15)
- break;
-
- if (bits (this_instr, 22, 25) == 0
- && bits (this_instr, 4, 7) == 9) /* multiply */
- error (_("Invalid update to pc in instruction"));
-
- /* BX <reg>, BLX <reg> */
- if (bits (this_instr, 4, 27) == 0x12fff1
- || bits (this_instr, 4, 27) == 0x12fff3)
- {
- rn = bits (this_instr, 0, 3);
- nextpc = ((rn == ARM_PC_REGNUM)
- ? (pc_val + 8)
- : regcache_raw_get_unsigned (regcache, rn));
-
- return nextpc;
- }
-
- /* Multiply into PC. */
- c = (status & FLAG_C) ? 1 : 0;
- rn = bits (this_instr, 16, 19);
- operand1 = ((rn == ARM_PC_REGNUM)
- ? (pc_val + 8)
- : regcache_raw_get_unsigned (regcache, rn));
-
- if (bit (this_instr, 25))
- {
- unsigned long immval = bits (this_instr, 0, 7);
- unsigned long rotate = 2 * bits (this_instr, 8, 11);
- operand2 = ((immval >> rotate) | (immval << (32 - rotate)))
- & 0xffffffff;
- }
- else /* operand 2 is a shifted register. */
- operand2 = shifted_reg_val (regcache, this_instr, c,
- pc_val, status);
-
- switch (bits (this_instr, 21, 24))
- {
- case 0x0: /*and */
- result = operand1 & operand2;
- break;
-
- case 0x1: /*eor */
- result = operand1 ^ operand2;
- break;
-
- case 0x2: /*sub */
- result = operand1 - operand2;
- break;
-
- case 0x3: /*rsb */
- result = operand2 - operand1;
- break;
-
- case 0x4: /*add */
- result = operand1 + operand2;
- break;
-
- case 0x5: /*adc */
- result = operand1 + operand2 + c;
- break;
-
- case 0x6: /*sbc */
- result = operand1 - operand2 + c;
- break;
-
- case 0x7: /*rsc */
- result = operand2 - operand1 + c;
- break;
-
- case 0x8:
- case 0x9:
- case 0xa:
- case 0xb: /* tst, teq, cmp, cmn */
- result = (unsigned long) nextpc;
- break;
-
- case 0xc: /*orr */
- result = operand1 | operand2;
- break;
-
- case 0xd: /*mov */
- /* Always step into a function. */
- result = operand2;
- break;
-
- case 0xe: /*bic */
- result = operand1 & ~operand2;
- break;
-
- case 0xf: /*mvn */
- result = ~operand2;
- break;
- }
-
- /* In 26-bit APCS the bottom two bits of the result are
- ignored, and we always end up in ARM state. */
- if (!arm_apcs_32)
- nextpc = arm_addr_bits_remove (gdbarch, result);
- else
- nextpc = result;
-
- break;
- }
-
- case 0x4:
- case 0x5: /* data transfer */
- case 0x6:
- case 0x7:
- if (bits (this_instr, 25, 27) == 0x3 && bit (this_instr, 4) == 1)
- {
- /* Media instructions and architecturally undefined
- instructions. */
- break;
- }
-
- if (bit (this_instr, 20))
- {
- /* load */
- if (bits (this_instr, 12, 15) == 15)
- {
- /* rd == pc */
- unsigned long rn;
- unsigned long base;
-
- if (bit (this_instr, 22))
- error (_("Invalid update to pc in instruction"));
-
- /* byte write to PC */
- rn = bits (this_instr, 16, 19);
- base = ((rn == ARM_PC_REGNUM)
- ? (pc_val + 8)
- : regcache_raw_get_unsigned (regcache, rn));
-
- if (bit (this_instr, 24))
- {
- /* pre-indexed */
- int c = (status & FLAG_C) ? 1 : 0;
- unsigned long offset =
- (bit (this_instr, 25)
- ? shifted_reg_val (regcache, this_instr, c, pc_val,
- status)
- : bits (this_instr, 0, 11));
-
- if (bit (this_instr, 23))
- base += offset;
- else
- base -= offset;
- }
- nextpc =
- (CORE_ADDR) read_memory_unsigned_integer ((CORE_ADDR) base,
- 4, byte_order);
- }
- }
- break;
-
- case 0x8:
- case 0x9: /* block transfer */
- if (bit (this_instr, 20))
- {
- /* LDM */
- if (bit (this_instr, 15))
- {
- /* loading pc */
- int offset = 0;
- unsigned long rn_val
- = regcache_raw_get_unsigned (regcache,
- bits (this_instr, 16, 19));
-
- if (bit (this_instr, 23))
- {
- /* up */
- unsigned long reglist = bits (this_instr, 0, 14);
- offset = bitcount (reglist) * 4;
- if (bit (this_instr, 24)) /* pre */
- offset += 4;
- }
- else if (bit (this_instr, 24))
- offset = -4;
-
- nextpc =
- (CORE_ADDR) read_memory_unsigned_integer ((CORE_ADDR)
- (rn_val + offset),
- 4, byte_order);
- }
- }
- break;
-
- case 0xb: /* branch & link */
- case 0xa: /* branch */
- {
- nextpc = BranchDest (pc, this_instr);
- break;
- }
-
- case 0xc:
- case 0xd:
- case 0xe: /* coproc ops */
- break;
- case 0xf: /* SWI */
- {
- struct gdbarch_tdep *tdep;
- tdep = gdbarch_tdep (gdbarch);
-
- if (tdep->syscall_next_pc != NULL)
- nextpc = tdep->syscall_next_pc (regcache);
-
- }
- break;
-
- default:
- fprintf_filtered (gdb_stderr, _("Bad bit-field extraction\n"));
- return (pc);
- }
- }
-
- return nextpc;
-}
-
-/* Determine next PC after current instruction executes. Will call either
- arm_get_next_pc_raw or thumb_get_next_pc_raw. Error out if infinite
- loop is detected. */
-
-CORE_ADDR
-arm_get_next_pc (struct regcache *regcache, CORE_ADDR pc)
-{
- CORE_ADDR nextpc;
-
- if (arm_is_thumb (regcache))
- nextpc = thumb_get_next_pc_raw (regcache, pc);
- else
- nextpc = arm_get_next_pc_raw (regcache, pc);
-
- return nextpc;
-}
-
-/* Like insert_single_step_breakpoint, but make sure we use a breakpoint
- of the appropriate mode (as encoded in the PC value), even if this
- differs from what would be expected according to the symbol tables. */
-
-void
-arm_insert_single_step_breakpoint (struct gdbarch *gdbarch,
- struct address_space *aspace,
- CORE_ADDR pc)
-{
- struct cleanup *old_chain
- = make_cleanup_restore_integer (&arm_override_mode);
-
- arm_override_mode = IS_THUMB_ADDR (pc);
- pc = gdbarch_addr_bits_remove (gdbarch, pc);
-
- insert_single_step_breakpoint (gdbarch, aspace, pc);
-
- do_cleanups (old_chain);
-}
-
-/* Checks for an atomic sequence of instructions beginning with a LDREX{,B,H,D}
- instruction and ending with a STREX{,B,H,D} instruction. If such a sequence
- is found, attempt to step through it. A breakpoint is placed at the end of
- the sequence. */
-
-static int
-thumb_deal_with_atomic_sequence_raw (struct regcache *regcache)
-{
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
- struct address_space *aspace = get_regcache_aspace (regcache);
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- CORE_ADDR pc = regcache_read_pc (regcache);
- CORE_ADDR breaks[2] = {-1, -1};
- CORE_ADDR loc = pc;
- unsigned short insn1, insn2;
- int insn_count;
- int index;
- int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
- const int atomic_sequence_length = 16; /* Instruction sequence length. */
- ULONGEST status, itstate;
-
- /* We currently do not support atomic sequences within an IT block. */
- status = regcache_raw_get_unsigned (regcache, ARM_PS_REGNUM);
- itstate = ((status >> 8) & 0xfc) | ((status >> 25) & 0x3);
- if (itstate & 0x0f)
- return 0;
-
- /* Assume all atomic sequences start with a ldrex{,b,h,d} instruction. */
- insn1 = read_memory_unsigned_integer (loc, 2, byte_order_for_code);
- loc += 2;
- if (thumb_insn_size (insn1) != 4)
- return 0;
-
- insn2 = read_memory_unsigned_integer (loc, 2, byte_order_for_code);
- loc += 2;
- if (!((insn1 & 0xfff0) == 0xe850
- || ((insn1 & 0xfff0) == 0xe8d0 && (insn2 & 0x00c0) == 0x0040)))
- return 0;
-
- /* Assume that no atomic sequence is longer than "atomic_sequence_length"
- instructions. */
- for (insn_count = 0; insn_count < atomic_sequence_length; ++insn_count)
- {
- insn1 = read_memory_unsigned_integer (loc, 2, byte_order_for_code);
- loc += 2;
-
- if (thumb_insn_size (insn1) != 4)
- {
- /* Assume that there is at most one conditional branch in the
- atomic sequence. If a conditional branch is found, put a
- breakpoint in its destination address. */
- if ((insn1 & 0xf000) == 0xd000 && bits (insn1, 8, 11) != 0x0f)
- {
- if (last_breakpoint > 0)
- return 0; /* More than one conditional branch found,
- fallback to the standard code. */
-
- breaks[1] = loc + 2 + (sbits (insn1, 0, 7) << 1);
- last_breakpoint++;
- }
-
- /* We do not support atomic sequences that use any *other*
- instructions but conditional branches to change the PC.
- Fall back to standard code to avoid losing control of
- execution. */
- else if (thumb_instruction_changes_pc (insn1))
- return 0;
- }
- else
- {
- insn2 = read_memory_unsigned_integer (loc, 2, byte_order_for_code);
- loc += 2;
-
- /* Assume that there is at most one conditional branch in the
- atomic sequence. If a conditional branch is found, put a
- breakpoint in its destination address. */
- if ((insn1 & 0xf800) == 0xf000
- && (insn2 & 0xd000) == 0x8000
- && (insn1 & 0x0380) != 0x0380)
- {
- int sign, j1, j2, imm1, imm2;
- unsigned int offset;
-
- sign = sbits (insn1, 10, 10);
- imm1 = bits (insn1, 0, 5);
- imm2 = bits (insn2, 0, 10);
- j1 = bit (insn2, 13);
- j2 = bit (insn2, 11);
-
- offset = (sign << 20) + (j2 << 19) + (j1 << 18);
- offset += (imm1 << 12) + (imm2 << 1);
-
- if (last_breakpoint > 0)
- return 0; /* More than one conditional branch found,
- fallback to the standard code. */
-
- breaks[1] = loc + offset;
- last_breakpoint++;
- }
-
- /* We do not support atomic sequences that use any *other*
- instructions but conditional branches to change the PC.
- Fall back to standard code to avoid losing control of
- execution. */
- else if (thumb2_instruction_changes_pc (insn1, insn2))
- return 0;
-
- /* If we find a strex{,b,h,d}, we're done. */
- if ((insn1 & 0xfff0) == 0xe840
- || ((insn1 & 0xfff0) == 0xe8c0 && (insn2 & 0x00c0) == 0x0040))
- break;
- }
- }
-
- /* If we didn't find the strex{,b,h,d}, we cannot handle the sequence. */
- if (insn_count == atomic_sequence_length)
- return 0;
-
- /* Insert a breakpoint right after the end of the atomic sequence. */
- breaks[0] = loc;
-
- /* Check for duplicated breakpoints. Check also for a breakpoint
- placed (branch instruction's destination) anywhere in sequence. */
- if (last_breakpoint
- && (breaks[1] == breaks[0]
- || (breaks[1] >= pc && breaks[1] < loc)))
- last_breakpoint = 0;
-
- /* Effectively inserts the breakpoints. */
- for (index = 0; index <= last_breakpoint; index++)
- arm_insert_single_step_breakpoint (gdbarch, aspace,
- MAKE_THUMB_ADDR (breaks[index]));
-
- return 1;
-}
-
-static int
-arm_deal_with_atomic_sequence_raw (struct regcache *regcache)
-{
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
- struct address_space *aspace = get_regcache_aspace (regcache);
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- CORE_ADDR pc = regcache_read_pc (regcache);
- CORE_ADDR breaks[2] = {-1, -1};
- CORE_ADDR loc = pc;
- unsigned int insn;
- int insn_count;
- int index;
- int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
- const int atomic_sequence_length = 16; /* Instruction sequence length. */
-
- /* Assume all atomic sequences start with a ldrex{,b,h,d} instruction.
- Note that we do not currently support conditionally executed atomic
- instructions. */
- insn = read_memory_unsigned_integer (loc, 4, byte_order_for_code);
- loc += 4;
- if ((insn & 0xff9000f0) != 0xe1900090)
- return 0;
-
- /* Assume that no atomic sequence is longer than "atomic_sequence_length"
- instructions. */
- for (insn_count = 0; insn_count < atomic_sequence_length; ++insn_count)
- {
- insn = read_memory_unsigned_integer (loc, 4, byte_order_for_code);
- loc += 4;
-
- /* Assume that there is at most one conditional branch in the atomic
- sequence. If a conditional branch is found, put a breakpoint in
- its destination address. */
- if (bits (insn, 24, 27) == 0xa)
- {
- if (last_breakpoint > 0)
- return 0; /* More than one conditional branch found, fallback
- to the standard single-step code. */
-
- breaks[1] = BranchDest (loc - 4, insn);
- last_breakpoint++;
- }
-
- /* We do not support atomic sequences that use any *other* instructions
- but conditional branches to change the PC. Fall back to standard
- code to avoid losing control of execution. */
- else if (arm_instruction_changes_pc (insn))
- return 0;
-
- /* If we find a strex{,b,h,d}, we're done. */
- if ((insn & 0xff9000f0) == 0xe1800090)
- break;
- }
-
- /* If we didn't find the strex{,b,h,d}, we cannot handle the sequence. */
- if (insn_count == atomic_sequence_length)
- return 0;
-
- /* Insert a breakpoint right after the end of the atomic sequence. */
- breaks[0] = loc;
-
- /* Check for duplicated breakpoints. Check also for a breakpoint
- placed (branch instruction's destination) anywhere in sequence. */
- if (last_breakpoint
- && (breaks[1] == breaks[0]
- || (breaks[1] >= pc && breaks[1] < loc)))
- last_breakpoint = 0;
-
- /* Effectively inserts the breakpoints. */
- for (index = 0; index <= last_breakpoint; index++)
- arm_insert_single_step_breakpoint (gdbarch, aspace, breaks[index]);
-
- return 1;
-}
-
-int
-arm_deal_with_atomic_sequence (struct regcache *regcache)
-{
- if (arm_is_thumb (regcache))
- return thumb_deal_with_atomic_sequence_raw (regcache);
- else
- return arm_deal_with_atomic_sequence_raw (regcache);
-}
-
-/* single_step() is called just before we want to resume the inferior,
- if we want to single-step it but there is no hardware or kernel
- single-step support. We find the target of the coming instruction
- and breakpoint it. */
-
-int
-arm_software_single_step (struct frame_info *frame)
-{
- struct regcache *regcache = get_current_regcache ();
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
- struct address_space *aspace = get_regcache_aspace (regcache);
- CORE_ADDR next_pc;
-
- if (arm_deal_with_atomic_sequence (regcache))
- return 1;
-
- next_pc = arm_get_next_pc (regcache, regcache_read_pc (regcache));
- arm_insert_single_step_breakpoint (gdbarch, aspace, next_pc);
-
- return 1;
-}
-
-/* Given BUF, which is OLD_LEN bytes ending at ENDADDR, expand
- the buffer to be NEW_LEN bytes ending at ENDADDR. Return
- NULL if an error occurs. BUF is freed. */
-
-static gdb_byte *
-extend_buffer_earlier (gdb_byte *buf, CORE_ADDR endaddr,
- int old_len, int new_len)
-{
- gdb_byte *new_buf;
- int bytes_to_read = new_len - old_len;
-
- new_buf = (gdb_byte *) xmalloc (new_len);
- memcpy (new_buf + bytes_to_read, buf, old_len);
- xfree (buf);
- if (target_read_memory (endaddr - new_len, new_buf, bytes_to_read) != 0)
- {
- xfree (new_buf);
- return NULL;
- }
- return new_buf;
-}
-/* An IT block is at most the 2-byte IT instruction followed by
- four 4-byte instructions. The furthest back we must search to
- find an IT block that affects the current instruction is thus
- 2 + 3 * 4 == 14 bytes. */
-#define MAX_IT_BLOCK_PREFIX 14
-
-/* Use a quick scan if there are more than this many bytes of
- code. */
-#define IT_SCAN_THRESHOLD 32
-
-/* Adjust a breakpoint's address to move breakpoints out of IT blocks.
- A breakpoint in an IT block may not be hit, depending on the
- condition flags. */
-static CORE_ADDR
-arm_adjust_breakpoint_address (struct gdbarch *gdbarch, CORE_ADDR bpaddr)
-{
- gdb_byte *buf;
- char map_type;
- CORE_ADDR boundary, func_start;
- int buf_len;
- enum bfd_endian order = gdbarch_byte_order_for_code (gdbarch);
- int i, any, last_it, last_it_count;
-
- /* If we are using BKPT breakpoints, none of this is necessary. */
- if (gdbarch_tdep (gdbarch)->thumb2_breakpoint == NULL)
- return bpaddr;
-
- /* ARM mode does not have this problem. */
- if (!arm_pc_is_thumb (gdbarch, bpaddr))
- return bpaddr;
-
- /* We are setting a breakpoint in Thumb code that could potentially
- contain an IT block. The first step is to find how much Thumb
- code there is; we do not need to read outside of known Thumb
- sequences. */
- map_type = arm_find_mapping_symbol (bpaddr, &boundary);
- if (map_type == 0)
- /* Thumb-2 code must have mapping symbols to have a chance. */
- return bpaddr;
-
- bpaddr = gdbarch_addr_bits_remove (gdbarch, bpaddr);
-
- if (find_pc_partial_function (bpaddr, NULL, &func_start, NULL)
- && func_start > boundary)
- boundary = func_start;
-
- /* Search for a candidate IT instruction. We have to do some fancy
- footwork to distinguish a real IT instruction from the second
- half of a 32-bit instruction, but there is no need for that if
- there's no candidate. */
- buf_len = min (bpaddr - boundary, MAX_IT_BLOCK_PREFIX);
- if (buf_len == 0)
- /* No room for an IT instruction. */
- return bpaddr;
-
- buf = (gdb_byte *) xmalloc (buf_len);
- if (target_read_memory (bpaddr - buf_len, buf, buf_len) != 0)
- return bpaddr;
- any = 0;
- for (i = 0; i < buf_len; i += 2)
- {
- unsigned short inst1 = extract_unsigned_integer (&buf[i], 2, order);
- if ((inst1 & 0xff00) == 0xbf00 && (inst1 & 0x000f) != 0)
- {
- any = 1;
- break;
- }
- }
if (any == 0)
{
xfree (buf);
return 0;
}
+/* Wrapper over read_memory_unsigned_integer for use in arm_get_next_pcs.
+ This is used to avoid a dependency on BFD's bfd_endian enum. */
+
+ULONGEST
+arm_get_next_pcs_read_memory_unsigned_integer (CORE_ADDR memaddr, int len,
+ int byte_order)
+{
+ return read_memory_unsigned_integer (memaddr, len, byte_order);
+}
+
+/* Wrapper over gdbarch_addr_bits_remove for use in arm_get_next_pcs. */
+
+CORE_ADDR
+arm_get_next_pcs_addr_bits_remove (struct arm_get_next_pcs *self,
+ CORE_ADDR val)
+{
+ return gdbarch_addr_bits_remove (get_regcache_arch (self->regcache), val);
+}
+
+/* Wrapper over syscall_next_pc for use in get_next_pcs. */
+
+CORE_ADDR
+arm_get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self, CORE_ADDR pc)
+{
+ struct gdbarch_tdep *tdep;
+
+ tdep = gdbarch_tdep (get_regcache_arch (self->regcache));
+ if (tdep->syscall_next_pc != NULL)
+ return tdep->syscall_next_pc (self->regcache);
+
+ return 0;
+}
+
+/* Wrapper over arm_is_thumb for use in arm_get_next_pcs. */
+
+int
+arm_get_next_pcs_is_thumb (struct arm_get_next_pcs *self)
+{
+ return arm_is_thumb (self->regcache);
+}
+
+/* single_step() is called just before we want to resume the inferior,
+ if we want to single-step it but there is no hardware or kernel
+ single-step support. We find the target of the coming instructions
+ and breakpoint them. */
+
+int
+arm_software_single_step (struct frame_info *frame)
+{
+ struct regcache *regcache = get_current_regcache ();
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct address_space *aspace = get_regcache_aspace (regcache);
+ struct arm_get_next_pcs next_pcs_ctx;
+ CORE_ADDR pc;
+ int i;
+ VEC (CORE_ADDR) *next_pcs = NULL;
+ struct cleanup *old_chain = make_cleanup (VEC_cleanup (CORE_ADDR), &next_pcs);
+
+ arm_get_next_pcs_ctor (&next_pcs_ctx,
+ &arm_get_next_pcs_ops,
+ gdbarch_byte_order (gdbarch),
+ gdbarch_byte_order_for_code (gdbarch),
+ gdbarch_tdep (gdbarch)->thumb2_breakpoint,
+ regcache);
+
+ next_pcs = arm_get_next_pcs (&next_pcs_ctx, regcache_read_pc (regcache));
+
+ for (i = 0; VEC_iterate (CORE_ADDR, next_pcs, i, pc); i++)
+ arm_insert_single_step_breakpoint (gdbarch, aspace, pc);
+
+ do_cleanups (old_chain);
+
+ return 1;
+}
+
/* Cleanup/copy SVC (SWI) instructions. These two functions are overridden
for Linux, where some SVC instructions must be treated specially. */
struct gdbarch;
struct regset;
struct address_space;
+struct get_next_pcs;
+struct arm_get_next_pcs;
+struct gdb_get_next_pcs;
#include "arch/arm.h"
ULONGEST val, enum pc_write_style write_pc);
CORE_ADDR arm_skip_stub (struct frame_info *, CORE_ADDR);
-CORE_ADDR arm_get_next_pc (struct regcache *regcache, CORE_ADDR pc);
+
+ULONGEST arm_get_next_pcs_read_memory_unsigned_integer (CORE_ADDR memaddr,
+ int len,
+ int byte_order);
+
+CORE_ADDR arm_get_next_pcs_addr_bits_remove (struct arm_get_next_pcs *self,
+ CORE_ADDR val);
+
+CORE_ADDR arm_get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self,
+ CORE_ADDR pc);
+
+int arm_get_next_pcs_is_thumb (struct arm_get_next_pcs *self);
+
void arm_insert_single_step_breakpoint (struct gdbarch *,
struct address_space *, CORE_ADDR);
-int arm_deal_with_atomic_sequence (struct regcache *);
int arm_software_single_step (struct frame_info *);
int arm_is_thumb (struct regcache *regcache);
int arm_frame_is_thumb (struct frame_info *frame);
DEF_VEC_I (int);
+DEF_VEC_I (CORE_ADDR);
+
extern void free_char_ptr_vec (VEC (char_ptr) *char_ptr_vec);
extern struct cleanup *
aarch64*-*-linux*)
# Target: AArch64 linux
gdb_target_obs="aarch64-tdep.o aarch64-linux-tdep.o aarch64-insn.o \
- arm.o arm-tdep.o arm-linux-tdep.o \
+ arm.o arm-linux.o arm-get-next-pcs.o arm-tdep.o \
+ arm-linux-tdep.o \
glibc-tdep.o linux-tdep.o solib-svr4.o \
symfile-mem.o linux-record.o"
build_gdbserver=yes
arm*-wince-pe | arm*-*-mingw32ce*)
# Target: ARM based machine running Windows CE (win32)
- gdb_target_obs="arm.o arm-tdep.o arm-wince-tdep.o windows-tdep.o"
+ gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o \
+ arm-wince-tdep.o windows-tdep.o"
build_gdbserver=yes
;;
arm*-*-linux*)
# Target: ARM based machine running GNU/Linux
- gdb_target_obs="arm.o arm-tdep.o arm-linux-tdep.o glibc-tdep.o \
+ gdb_target_obs="arm.o arm-linux.o arm-get-next-pcs.o arm-tdep.o \
+ arm-linux-tdep.o glibc-tdep.o \
solib-svr4.o symfile-mem.o linux-tdep.o linux-record.o"
build_gdbserver=yes
;;
arm*-*-netbsd* | arm*-*-knetbsd*-gnu)
# Target: NetBSD/arm
- gdb_target_obs="arm.o arm-tdep.o armnbsd-tdep.o solib-svr4.o"
+ gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o armnbsd-tdep.o \
+ solib-svr4.o"
;;
arm*-*-openbsd*)
# Target: OpenBSD/arm
- gdb_target_obs="arm.o arm-tdep.o armbsd-tdep.o armobsd-tdep.o \
- obsd-tdep.o solib-svr4.o"
+ gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o armbsd-tdep.o \
+ armobsd-tdep.o obsd-tdep.o solib-svr4.o"
;;
arm*-*-symbianelf*)
# Target: SymbianOS/arm
- gdb_target_obs="arm.o arm-tdep.o arm-symbian-tdep.o"
+ gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o arm-symbian-tdep.o"
;;
arm*-*-*)
# Target: ARM embedded system
- gdb_target_obs="arm.o arm-tdep.o"
+ gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o"
gdb_sim=../sim/arm/libsim.a
;;
+2015-12-18 Antoine Tremblay <antoine.tremblay@ericsson.com>
+
+ * Makefile.in (SFILES): Append arch/arm-linux.c,
+ arch/arm-get-next-pcs.c.
+ (arm-linux.o): New rule.
+ (arm-get-next-pcs.o): New rule.
+ * configure.srv (arm*-*-linux*): Add arm-get-next-pcs.o,
+ arm-linux.o.
+ * linux-aarch32-low.c (arm_abi_breakpoint): Remove macro. Moved
+ to linux-aarch32-low.c.
+ (arm_eabi_breakpoint, arm_breakpoint): Likewise.
+ (arm_breakpoint_len, thumb_breakpoint): Likewise.
+ (thumb_breakpoint_len, thumb2_breakpoint): Likewise.
+ (thumb2_breakpoint_len): Likewise.
+ (arm_is_thumb_mode): Make non-static.
+ * linux-aarch32-low.h (arm_abi_breakpoint): New macro. Moved
+ from linux-aarch32-low.c.
+ (arm_eabi_breakpoint, arm_breakpoint): Likewise.
+ (arm_breakpoint_len, thumb_breakpoint): Likewise.
+ (thumb_breakpoint_len, thumb2_breakpoint): Likewise.
+ (thumb2_breakpoint_len): Likewise.
+ (arm_is_thumb_mode): New declaration.
+ * linux-arm-low.c: Include arch/arm-linux.h
+ aarch/arm-get-next-pcs.h, sys/syscall.h.
+ (get_next_pcs_ops): New struct.
+ (get_next_pcs_addr_bits_remove): New function.
+ (get_next_pcs_is_thumb): New function.
+ (get_next_pcs_read_memory_unsigned_integer): Likewise.
+ (arm_sigreturn_next_pc): Likewise.
+ (get_next_pcs_syscall_next_pc): Likewise.
+ (arm_gdbserver_get_next_pcs): Likewise.
+ (struct linux_target_ops) <arm_gdbserver_get_next_pcs>:
+ Initialize.
+ * linux-low.h: Move CORE_ADDR vector definition to gdb_vecs.h.
+ * server.h: Include gdb_vecs.h.
+
2015-12-18 Antoine Tremblay <antoine.tremblay@ericsson.com>
* Makefile.in (SFILES): Append common/common-regcache.c.
$(srcdir)/common/common-exceptions.c $(srcdir)/symbol.c \
$(srcdir)/common/btrace-common.c \
$(srcdir)/common/fileio.c $(srcdir)/nat/linux-namespaces.c \
- $(srcdir)/arch/arm.c $(srcdir)/common/common-regcache.c
+ $(srcdir)/arch/arm.c $(srcdir)/common/common-regcache.c \
+ $(srcdir)/arch/arm-linux.c $(srcdir)/arch/arm-get-next-pcs.c
DEPFILES = @GDBSERVER_DEPFILES@
arm.o: ../arch/arm.c
$(COMPILE) $<
$(POSTCOMPILE)
+arm-linux.o: ../arch/arm-linux.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
+arm-get-next-pcs.o: ../arch/arm-get-next-pcs.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
# Native object files rules from ../nat
srv_tgtobj="$srv_linux_obj linux-arm-low.o"
srv_tgtobj="$srv_tgtobj linux-aarch32-low.o"
srv_tgtobj="${srv_tgtobj} arm.o"
+ srv_tgtobj="${srv_tgtobj} arm-linux.o"
+ srv_tgtobj="${srv_tgtobj} arm-get-next-pcs.o"
srv_xmlfiles="arm-with-iwmmxt.xml"
srv_xmlfiles="${srv_xmlfiles} arm-with-vfpv2.xml"
srv_xmlfiles="${srv_xmlfiles} arm-with-vfpv3.xml"
&aarch32_regsets_info
};
-/* Correct in either endianness. */
-#define arm_abi_breakpoint 0xef9f0001UL
-
-/* For new EABI binaries. We recognize it regardless of which ABI
- is used for gdbserver, so single threaded debugging should work
- OK, but for multi-threaded debugging we only insert the current
- ABI's breakpoint instruction. For now at least. */
-#define arm_eabi_breakpoint 0xe7f001f0UL
-
-#if (defined __ARM_EABI__ || defined __aarch64__)
-static const unsigned long arm_breakpoint = arm_eabi_breakpoint;
-#else
-static const unsigned long arm_breakpoint = arm_abi_breakpoint;
-#endif
-
-#define arm_breakpoint_len 4
-static const unsigned short thumb_breakpoint = 0xde01;
-#define thumb_breakpoint_len 2
-static const unsigned short thumb2_breakpoint[] = { 0xf7f0, 0xa000 };
-#define thumb2_breakpoint_len 4
-
/* Returns 1 if the current instruction set is thumb, 0 otherwise. */
-static int
+int
arm_is_thumb_mode (void)
{
struct regcache *regcache = get_thread_regcache (current_thread, 1);
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
+/* Correct in either endianness. */
+#define arm_abi_breakpoint 0xef9f0001UL
+
+/* For new EABI binaries. We recognize it regardless of which ABI
+ is used for gdbserver, so single threaded debugging should work
+ OK, but for multi-threaded debugging we only insert the current
+ ABI's breakpoint instruction. For now at least. */
+#define arm_eabi_breakpoint 0xe7f001f0UL
+
+#ifndef __ARM_EABI__
+static const unsigned long arm_breakpoint = arm_abi_breakpoint;
+#else
+static const unsigned long arm_breakpoint = arm_eabi_breakpoint;
+#endif
+
+#define arm_breakpoint_len 4
+static const unsigned short thumb_breakpoint = 0xde01;
+#define thumb_breakpoint_len 2
+static const unsigned short thumb2_breakpoint[] = { 0xf7f0, 0xa000 };
+#define thumb2_breakpoint_len 4
+
extern struct regs_info regs_info_aarch32;
void arm_fill_gregset (struct regcache *regcache, void *buf);
void initialize_low_arch_aarch32 (void);
void init_registers_arm_with_neon (void);
+int arm_is_thumb_mode (void);
+
extern const struct target_desc *tdesc_arm_with_neon;
#include "server.h"
#include "linux-low.h"
#include "arch/arm.h"
+#include "arch/arm-linux.h"
+#include "arch/arm-get-next-pcs.h"
#include "linux-aarch32-low.h"
#include <sys/uio.h>
#endif
#include "nat/gdb_ptrace.h"
#include <signal.h>
+#include <sys/syscall.h>
/* Defined in auto-generated files. */
void init_registers_arm (void);
64
};
+/* Forward declarations needed for get_next_pcs ops. */
+static ULONGEST get_next_pcs_read_memory_unsigned_integer (CORE_ADDR memaddr,
+ int len,
+ int byte_order);
+
+static CORE_ADDR get_next_pcs_addr_bits_remove (struct arm_get_next_pcs *self,
+ CORE_ADDR val);
+
+static CORE_ADDR get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self,
+ CORE_ADDR pc);
+
+static int get_next_pcs_is_thumb (struct arm_get_next_pcs *self);
+
+/* get_next_pcs operations. */
+static struct arm_get_next_pcs_ops get_next_pcs_ops = {
+ get_next_pcs_read_memory_unsigned_integer,
+ get_next_pcs_syscall_next_pc,
+ get_next_pcs_addr_bits_remove,
+ get_next_pcs_is_thumb
+};
+
static int
arm_cannot_store_register (int regno)
{
arm_fill_vfpregset_num (regcache, buf, num);
}
+/* Wrapper of UNMAKE_THUMB_ADDR for get_next_pcs. */
+static CORE_ADDR
+get_next_pcs_addr_bits_remove (struct arm_get_next_pcs *self, CORE_ADDR val)
+{
+ return UNMAKE_THUMB_ADDR (val);
+}
+
static void
arm_store_vfpregset (struct regcache *regcache, const void *buf)
{
supply_register_by_name (regcache, "pc", &newpc);
}
+/* Wrapper of arm_is_thumb_mode for get_next_pcs. */
+static int
+get_next_pcs_is_thumb (struct arm_get_next_pcs *self)
+{
+ return arm_is_thumb_mode ();
+}
+
+/* Read memory from the inferiror.
+ BYTE_ORDER is ignored and there to keep compatiblity with GDB's
+ read_memory_unsigned_integer. */
+static ULONGEST
+get_next_pcs_read_memory_unsigned_integer (CORE_ADDR memaddr,
+ int len,
+ int byte_order)
+{
+ ULONGEST res;
+
+ (*the_target->read_memory) (memaddr, (unsigned char *) &res, len);
+ return res;
+}
+
/* Fetch the thread-local storage pointer for libthread_db. */
ps_err_e
}
}
+/* Find the next pc for a sigreturn or rt_sigreturn syscall.
+ See arm-linux.h for stack layout details. */
+static CORE_ADDR
+arm_sigreturn_next_pc (struct regcache *regcache, int svc_number)
+{
+ unsigned long sp;
+ unsigned long sp_data;
+ /* Offset of PC register. */
+ int pc_offset = 0;
+ CORE_ADDR next_pc = 0;
+
+ gdb_assert (svc_number == __NR_sigreturn || svc_number == __NR_rt_sigreturn);
+
+ collect_register_by_name (regcache, "sp", &sp);
+ (*the_target->read_memory) (sp, (unsigned char *) &sp_data, 4);
+
+ pc_offset = arm_linux_sigreturn_next_pc_offset
+ (sp, sp_data, svc_number, __NR_sigreturn == svc_number ? 1 : 0);
+
+ (*the_target->read_memory) (sp + pc_offset, (unsigned char *) &next_pc, 4);
+
+ return next_pc;
+}
+
+/* When PC is at a syscall instruction, return the PC of the next
+ instruction to be executed. */
+static CORE_ADDR
+get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self, CORE_ADDR pc)
+{
+ CORE_ADDR next_pc = 0;
+ int is_thumb = arm_is_thumb_mode ();
+ ULONGEST svc_number = 0;
+ struct regcache *regcache = self->regcache;
+
+ if (is_thumb)
+ {
+ collect_register (regcache, 7, &svc_number);
+ next_pc = pc + 2;
+ }
+ else
+ {
+ unsigned long this_instr;
+ unsigned long svc_operand;
+
+ (*the_target->read_memory) (pc, (unsigned char *) &this_instr, 4);
+ svc_operand = (0x00ffffff & this_instr);
+
+ if (svc_operand) /* OABI. */
+ {
+ svc_number = svc_operand - 0x900000;
+ }
+ else /* EABI. */
+ {
+ collect_register (regcache, 7, &svc_number);
+ }
+
+ next_pc = pc + 4;
+ }
+
+ /* This is a sigreturn or sigreturn_rt syscall. */
+ if (svc_number == __NR_sigreturn || svc_number == __NR_rt_sigreturn)
+ {
+ next_pc = arm_sigreturn_next_pc (regcache, svc_number);
+ }
+
+ /* Addresses for calling Thumb functions have the bit 0 set. */
+ if (is_thumb)
+ next_pc = MAKE_THUMB_ADDR (next_pc);
+
+ return next_pc;
+}
static int
arm_get_hwcap (unsigned long *valp)
have_ptrace_getregset = 0;
}
+/* Fetch the next possible PCs after the current instruction executes. */
+
+static VEC (CORE_ADDR) *
+arm_gdbserver_get_next_pcs (CORE_ADDR pc, struct regcache *regcache)
+{
+ struct arm_get_next_pcs next_pcs_ctx;
+ VEC (CORE_ADDR) *next_pcs = NULL;
+
+ arm_get_next_pcs_ctor (&next_pcs_ctx,
+ &get_next_pcs_ops,
+ /* Byte order is ignored assumed as host. */
+ 0,
+ 0,
+ (const gdb_byte *) &thumb2_breakpoint,
+ regcache);
+
+ next_pcs = arm_get_next_pcs (&next_pcs_ctx, pc);
+
+ return next_pcs;
+}
+
/* Support for hardware single step. */
static int
arm_set_pc,
arm_breakpoint_kind_from_pc,
arm_sw_breakpoint_from_kind,
- NULL, /* get_next_pcs */
+ arm_gdbserver_get_next_pcs,
0,
arm_breakpoint_at,
arm_supports_z_point_type,
struct lwp_info;
-DEF_VEC_I (CORE_ADDR);
-
struct linux_target_ops
{
/* Architecture-specific setup. */
#include "utils.h"
#include "debug.h"
+#include "gdb_vecs.h"
/* Maximum number of bytes to read/write at once. The value here
is chosen to fill up a packet (the headers account for the 32). */
void *data),
void *data);
-DEF_VEC_I (CORE_ADDR);
-
VEC (CORE_ADDR) *find_pcs_for_symtab_line (struct symtab *symtab, int line,
struct linetable_entry **best_entry);
projects / binutils-gdb.git / commitdiff