dwarf2: Reduce some redundant definitions.

Move some definitions to defaults.h; some simply aren't needed
anymore in the respective dwarf2{cfi,out}.c files.

        * defaults.h (DWARF_CIE_DATA_ALIGNMENT, DWARF_FRAME_RETURN_COLUMN,
        DWARF_FRAME_REGNUM, DWARF2_FRAME_REG_OUT): Move from ...
        * dwarf2cfi.c: ... here.
        (PTR_SIZE, DWARF_OFFSET_SIZE, DWARF_INITIAL_LENGTH_SIZE): Remove.
        (DWARF_ROUND, DWARF_CIE_ID): Remove.
        * dwarf2out.c (INCOMING_RETURN_ADDR_RTX): Remove.
        (DWARF2_FRAME_REG_OUT, DWARF_CIE_DATA_ALIGNMENT): Remove.
        (DWARF_FRAME_RETURN_COLUMN, DWARF_FRAME_REGNUM): Remove.

From-SVN: r176102

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index bf10d3d361c475c70fa0af9940cd75464c9b33ce..b0290cdf6ef49156a1ac6f5f5940a1544bf6aaac 100644 (file)
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,14 @@
+2011-07-09  Richard Henderson  <rth@redhat.com>
+
+       * defaults.h (DWARF_CIE_DATA_ALIGNMENT, DWARF_FRAME_RETURN_COLUMN,
+       DWARF_FRAME_REGNUM, DWARF2_FRAME_REG_OUT): Move from ...
+       * dwarf2cfi.c: ... here.
+       (PTR_SIZE, DWARF_OFFSET_SIZE, DWARF_INITIAL_LENGTH_SIZE): Remove.
+       (DWARF_ROUND, DWARF_CIE_ID): Remove.
+       * dwarf2out.c (INCOMING_RETURN_ADDR_RTX): Remove.
+       (DWARF2_FRAME_REG_OUT, DWARF_CIE_DATA_ALIGNMENT): Remove.
+       (DWARF_FRAME_RETURN_COLUMN, DWARF_FRAME_REGNUM): Remove.
+
 2011-07-09  Richard Henderson  <rth@redhat.com>
 
        * dwarf2cfi.c (cie_return_save): New.

diff --git a/gcc/defaults.h b/gcc/defaults.h
index 118cb1c25654ba66235bbc0520ebc824c37090d5..6bacb3c01394caa687c046ccc4a0b1802cfc04ce 100644 (file)
--- a/gcc/defaults.h
+++ b/gcc/defaults.h
@@ -413,6 +413,26 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
 #define DWARF_FRAME_REGISTERS FIRST_PSEUDO_REGISTER
 #endif
 
+/* Offsets recorded in opcodes are a multiple of this alignment factor.  */
+#ifndef DWARF_CIE_DATA_ALIGNMENT
+#ifdef STACK_GROWS_DOWNWARD
+#define DWARF_CIE_DATA_ALIGNMENT (-((int) UNITS_PER_WORD))
+#else
+#define DWARF_CIE_DATA_ALIGNMENT ((int) UNITS_PER_WORD)
+#endif
+#endif
+
+/* The DWARF 2 CFA column which tracks the return address.  Normally this
+   is the column for PC, or the first column after all of the hard
+   registers.  */
+#ifndef DWARF_FRAME_RETURN_COLUMN
+#ifdef PC_REGNUM
+#define DWARF_FRAME_RETURN_COLUMN      DWARF_FRAME_REGNUM (PC_REGNUM)
+#else
+#define DWARF_FRAME_RETURN_COLUMN      DWARF_FRAME_REGISTERS
+#endif
+#endif
+
 /* How to renumber registers for dbx and gdb.  If not defined, assume
    no renumbering is necessary.  */
 
@@ -420,6 +440,19 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
 #define DBX_REGISTER_NUMBER(REGNO) (REGNO)
 #endif
 
+/* The mapping from gcc register number to DWARF 2 CFA column number.
+   By default, we just provide columns for all registers.  */
+#ifndef DWARF_FRAME_REGNUM
+#define DWARF_FRAME_REGNUM(REG) DBX_REGISTER_NUMBER (REG)
+#endif
+
+/* Map register numbers held in the call frame info that gcc has
+   collected using DWARF_FRAME_REGNUM to those that should be output in
+   .debug_frame and .eh_frame.  */
+#ifndef DWARF2_FRAME_REG_OUT
+#define DWARF2_FRAME_REG_OUT(REGNO, FOR_EH) (REGNO)
+#endif
+
 /* Default sizes for base C types.  If the sizes are different for
    your target, you should override these values by defining the
    appropriate symbols in your tm.h file.  */

diff --git a/gcc/dwarf2cfi.c b/gcc/dwarf2cfi.c
index 5b76df359f4256ca21aa3ee0c02caf3c6d4feb25..28f9b938a2adb774d48b17cb08ee3661f4e72c04 100644 (file)
--- a/gcc/dwarf2cfi.c
+++ b/gcc/dwarf2cfi.c
@@ -55,88 +55,8 @@ along with GCC; see the file COPYING3.  If not see
 #define INCOMING_RETURN_ADDR_RTX  (gcc_unreachable (), NULL_RTX)
 #endif
 
-/* The size of the target's pointer type.  */
-#ifndef PTR_SIZE
-#define PTR_SIZE (POINTER_SIZE / BITS_PER_UNIT)
-#endif
-
 /* Maximum size (in bytes) of an artificially generated label.  */
 #define MAX_ARTIFICIAL_LABEL_BYTES     30
-
-/* The size of addresses as they appear in the Dwarf 2 data.
-   Some architectures use word addresses to refer to code locations,
-   but Dwarf 2 info always uses byte addresses.  On such machines,
-   Dwarf 2 addresses need to be larger than the architecture's
-   pointers.  */
-#ifndef DWARF2_ADDR_SIZE
-#define DWARF2_ADDR_SIZE (POINTER_SIZE / BITS_PER_UNIT)
-#endif
-
-/* The size in bytes of a DWARF field indicating an offset or length
-   relative to a debug info section, specified to be 4 bytes in the
-   DWARF-2 specification.  The SGI/MIPS ABI defines it to be the same
-   as PTR_SIZE.  */
-
-#ifndef DWARF_OFFSET_SIZE
-#define DWARF_OFFSET_SIZE 4
-#endif
-
-/* According to the (draft) DWARF 3 specification, the initial length
-   should either be 4 or 12 bytes.  When it's 12 bytes, the first 4
-   bytes are 0xffffffff, followed by the length stored in the next 8
-   bytes.
-
-   However, the SGI/MIPS ABI uses an initial length which is equal to
-   DWARF_OFFSET_SIZE.  It is defined (elsewhere) accordingly.  */
-
-#ifndef DWARF_INITIAL_LENGTH_SIZE
-#define DWARF_INITIAL_LENGTH_SIZE (DWARF_OFFSET_SIZE == 4 ? 4 : 12)
-#endif
-
-/* Round SIZE up to the nearest BOUNDARY.  */
-#define DWARF_ROUND(SIZE,BOUNDARY) \
-  ((((SIZE) + (BOUNDARY) - 1) / (BOUNDARY)) * (BOUNDARY))
-
-/* Offsets recorded in opcodes are a multiple of this alignment factor.  */
-#ifndef DWARF_CIE_DATA_ALIGNMENT
-#ifdef STACK_GROWS_DOWNWARD
-#define DWARF_CIE_DATA_ALIGNMENT (-((int) UNITS_PER_WORD))
-#else
-#define DWARF_CIE_DATA_ALIGNMENT ((int) UNITS_PER_WORD)
-#endif
-#endif
-
-/* CIE identifier.  */
-#if HOST_BITS_PER_WIDE_INT >= 64
-#define DWARF_CIE_ID \
-  (unsigned HOST_WIDE_INT) (DWARF_OFFSET_SIZE == 4 ? DW_CIE_ID : DW64_CIE_ID)
-#else
-#define DWARF_CIE_ID DW_CIE_ID
-#endif
-
-/* The DWARF 2 CFA column which tracks the return address.  Normally this
-   is the column for PC, or the first column after all of the hard
-   registers.  */
-#ifndef DWARF_FRAME_RETURN_COLUMN
-#ifdef PC_REGNUM
-#define DWARF_FRAME_RETURN_COLUMN      DWARF_FRAME_REGNUM (PC_REGNUM)
-#else
-#define DWARF_FRAME_RETURN_COLUMN      DWARF_FRAME_REGISTERS
-#endif
-#endif
-
-/* The mapping from gcc register number to DWARF 2 CFA column number.  By
-   default, we just provide columns for all registers.  */
-#ifndef DWARF_FRAME_REGNUM
-#define DWARF_FRAME_REGNUM(REG) DBX_REGISTER_NUMBER (REG)
-#endif
-
-/* Map register numbers held in the call frame info that gcc has
-   collected using DWARF_FRAME_REGNUM to those that should be output in
-   .debug_frame and .eh_frame.  */
-#ifndef DWARF2_FRAME_REG_OUT
-#define DWARF2_FRAME_REG_OUT(REGNO, FOR_EH) (REGNO)
-#endif
 \f
 /* A vector of call frame insns for the CIE.  */
 cfi_vec cie_cfi_vec;

diff --git a/gcc/dwarf2out.c b/gcc/dwarf2out.c
index af7b58fa399d367c2e1cab1a0997d5471e2e63c0..4431655af6a08a88fb50572fce0adccd692fa347 100644 (file)
--- a/gcc/dwarf2out.c
+++ b/gcc/dwarf2out.c
@@ -122,17 +122,6 @@ int vms_file_stats_name (const char *, long long *, long *, char *, int *);
  #pragma GCC poison DWARF2_UNWIND_INFO DWARF2_FRAME_INFO
 #endif
 
-#ifndef INCOMING_RETURN_ADDR_RTX
-#define INCOMING_RETURN_ADDR_RTX  (gcc_unreachable (), NULL_RTX)
-#endif
-
-/* Map register numbers held in the call frame info that gcc has
-   collected using DWARF_FRAME_REGNUM to those that should be output in
-   .debug_frame and .eh_frame.  */
-#ifndef DWARF2_FRAME_REG_OUT
-#define DWARF2_FRAME_REG_OUT(REGNO, FOR_EH) (REGNO)
-#endif
-
 /* The size of the target's pointer type.  */
 #ifndef PTR_SIZE
 #define PTR_SIZE (POINTER_SIZE / BITS_PER_UNIT)
@@ -211,15 +200,6 @@ static GTY(()) section *debug_frame_section;
 #define DWARF_ROUND(SIZE,BOUNDARY) \
   ((((SIZE) + (BOUNDARY) - 1) / (BOUNDARY)) * (BOUNDARY))
 
-/* Offsets recorded in opcodes are a multiple of this alignment factor.  */
-#ifndef DWARF_CIE_DATA_ALIGNMENT
-#ifdef STACK_GROWS_DOWNWARD
-#define DWARF_CIE_DATA_ALIGNMENT (-((int) UNITS_PER_WORD))
-#else
-#define DWARF_CIE_DATA_ALIGNMENT ((int) UNITS_PER_WORD)
-#endif
-#endif
-
 /* CIE identifier.  */
 #if HOST_BITS_PER_WIDE_INT >= 64
 #define DWARF_CIE_ID \
@@ -309,23 +289,6 @@ static GTY(()) rtx current_unit_personality;
 #define LN_PROLOG_AS_LABEL     "LASLTP"
 #define LN_PROLOG_END_LABEL    "LELTP"
 #define DIE_LABEL_PREFIX       "DW"
-
-/* The DWARF 2 CFA column which tracks the return address.  Normally this
-   is the column for PC, or the first column after all of the hard
-   registers.  */
-#ifndef DWARF_FRAME_RETURN_COLUMN
-#ifdef PC_REGNUM
-#define DWARF_FRAME_RETURN_COLUMN      DWARF_FRAME_REGNUM (PC_REGNUM)
-#else
-#define DWARF_FRAME_RETURN_COLUMN      DWARF_FRAME_REGISTERS
-#endif
-#endif
-
-/* The mapping from gcc register number to DWARF 2 CFA column number.  By
-   default, we just provide columns for all registers.  */
-#ifndef DWARF_FRAME_REGNUM
-#define DWARF_FRAME_REGNUM(REG) DBX_REGISTER_NUMBER (REG)
-#endif
 \f
 /* Match the base name of a file to the base name of a compilation unit. */