int uip:16;
} break_cont;
+ /**
+ * \defgroup SEND instructions / Message Descriptors
+ *
+ * @{
+ */
+
+ /**
+ * Generic Message Descriptor for Gen4 SEND instructions. The structs
+ * below expand function_control to something specific for their
+ * message. Due to struct packing issues, they duplicate these bits.
+ *
+ * See the G45 PRM, Volume 4, Table 14-15.
+ */
+ struct {
+ GLuint function_control:16;
+ GLuint response_length:4;
+ GLuint msg_length:4;
+ GLuint msg_target:4;
+ GLuint pad1:3;
+ GLuint end_of_thread:1;
+ } generic;
+
+ /**
+ * Generic Message Descriptor for Gen5-7 SEND instructions.
+ *
+ * See the Sandybridge PRM, Volume 2 Part 2, Table 8-15. (Sadly, most
+ * of the information on the SEND instruction is missing from the public
+ * Ironlake PRM.)
+ *
+ * The table claims that bit 31 is reserved/MBZ on Gen6+, but it lies.
+ * According to the SEND instruction description:
+ * "The MSb of the message description, the EOT field, always comes from
+ * bit 127 of the instruction word"...which is bit 31 of this field.
+ */
+ struct {
+ GLuint function_control:19;
+ GLuint header_present:1;
+ GLuint response_length:5;
+ GLuint msg_length:4;
+ GLuint pad1:2;
+ GLuint end_of_thread:1;
+ } generic_gen5;
+
+ /** G45 PRM, Volume 4, Section 6.1.1.1 */
struct {
GLuint function:4;
GLuint int_type:1;
GLuint end_of_thread:1;
} math;
+ /** Ironlake PRM, Volume 4 Part 1, Section 6.1.1.1 */
struct {
GLuint function:4;
GLuint int_type:1;
GLuint end_of_thread:1;
} math_gen5;
+ /** G45 PRM, Volume 4, Section 4.8.1.1.1 [DevBW] and [DevCL] */
struct {
GLuint binding_table_index:8;
GLuint sampler:4;
GLuint end_of_thread:1;
} sampler;
+ /** G45 PRM, Volume 4, Section 4.8.1.1.2 [DevCTG] */
struct {
GLuint binding_table_index:8;
GLuint sampler:4;
GLuint end_of_thread:1;
} sampler_g4x;
+ /** Ironlake PRM, Volume 4 Part 1, Section 4.11.1.1.3 */
struct {
GLuint binding_table_index:8;
GLuint sampler:4;
GLuint end_of_thread:1;
} urb_gen7;
+ /** 965 PRM, Volume 4, Section 5.10.1.1: Message Descriptor */
struct {
GLuint binding_table_index:8;
GLuint msg_control:4;
GLuint end_of_thread:1;
} dp_read;
+ /** G45 PRM, Volume 4, Section 5.10.1.1.2 */
struct {
GLuint binding_table_index:8;
GLuint msg_control:3;
GLuint end_of_thread:1;
} dp_read_g4x;
+ /** Ironlake PRM, Volume 4 Part 1, Section 5.10.2.1.2. */
struct {
GLuint binding_table_index:8;
GLuint msg_control:3;
GLuint end_of_thread:1;
} dp_read_gen5;
+ /** G45 PRM, Volume 4, Section 5.10.1.1.2. For both Gen4 and G45. */
struct {
GLuint binding_table_index:8;
GLuint msg_control:3;
GLuint end_of_thread:1;
} dp_write;
+ /** Ironlake PRM, Volume 4 Part 1, Section 5.10.2.1.2. */
struct {
GLuint binding_table_index:8;
GLuint msg_control:3;
GLuint end_of_thread:1;
} dp_write_gen5;
- /* Sandybridge DP for sample cache, constant cache, render cache */
+ /**
+ * Message for the Sandybridge Sampler Cache or Constant Cache Data Port.
+ *
+ * See the Sandybridge PRM, Volume 4 Part 1, Section 3.9.2.1.1.
+ **/
struct {
GLuint binding_table_index:8;
GLuint msg_control:5;
GLuint msg_length:4;
GLuint pad1:2;
GLuint end_of_thread:1;
- } dp_sampler_const_cache;
+ } gen6_dp_sampler_const_cache;
+ /**
+ * Message for the Sandybridge Render Cache Data Port.
+ *
+ * Most fields are defined in the Sandybridge PRM, Volume 4 Part 1,
+ * Section 3.9.2.1.1: Message Descriptor.
+ *
+ * "Slot Group Select" and "Last Render Target" are part of the
+ * 5-bit message control for Render Target Write messages. See
+ * Section 3.9.9.2.1 of the same volume.
+ */
struct {
GLuint binding_table_index:8;
GLuint msg_control:3;
GLuint end_of_thread:1;
} gen6_dp;
- /* See volume vol5c.2 sections 2.11.2.1.5 and 2.11.21.2.2. */
+ /**
+ * Message for any of the Gen7 Data Port caches.
+ *
+ * Most fields are defined in BSpec volume 5c.2 Data Port / Messages /
+ * Data Port Messages / Message Descriptor. Once again, "Slot Group
+ * Select" and "Last Render Target" are part of the 6-bit message
+ * control for Render Target Writes.
+ */
struct {
GLuint binding_table_index:8;
GLuint msg_control:3;
GLuint slot_group_select:1;
GLuint last_render_target:1;
- GLuint pad0:1;
+ GLuint msg_control_pad:1;
GLuint msg_type:4;
GLuint pad1:1;
GLuint header_present:1;
GLuint pad2:2;
GLuint end_of_thread:1;
} gen7_dp;
-
- /**
- * Message Descriptor for Gen4 SEND instructions (no particular message).
- *
- * See the G45 PRM, Volume 4, Table 14-15.
- */
- struct {
- GLuint function_control:16;
- GLuint response_length:4;
- GLuint msg_length:4;
- GLuint msg_target:4;
- GLuint pad1:3;
- GLuint end_of_thread:1;
- } generic;
-
- /**
- * Message Descriptor for Gen5-7 SEND instructions.
- *
- * See the Sandybridge PRM, Volume 2 Part 2, Table 8-15. (Sadly, most
- * of the information on the SEND instruction is missing from the public
- * Ironlake PRM.)
- *
- * The table claims that bit 31 is reserved/MBZ on Gen6+, but it lies.
- * According to the SEND instruction description:
- * "The MSb of the message description, the EOT field, always comes from
- * bit 127 of the instruction word"...which is bit 31 of this field.
- */
- struct {
- GLuint function_control:19;
- GLuint header_present:1;
- GLuint response_length:5;
- GLuint msg_length:4;
- GLuint pad1:2;
- GLuint end_of_thread:1;
- } generic_gen5;
+ /** @} */
GLint d;
GLuint ud;
projects / mesa.git / commitdiff