+2014-09-02 Gary Benson <gbenson@redhat.com>
+
+ * i386-nat.h: Renamed as...
+ * x86-nat.h: New file. All type, function and variable name
+ prefixes changed from "i386_" to "x86_". All references updated.
+ * i386-nat.c: Renamed as...
+ * x86-nat.c: New file. All type, function and variable name
+ prefixes changed from "i386_" to "x86_". All references updated.
+ * common/i386-xstate.h: Renamed as...
+ * common/x86-xstate.h: New file. All type, function and variable
+ name prefixes changed from "i386_" to "x86_". All references
+ updated.
+ * nat/i386-cpuid.h: Renamed as...
+ * nat/x86-cpuid.h: New file. All type, function and variable name
+ prefixes changed from "i386_" to "x86_". All references updated.
+ * nat/i386-gcc-cpuid.h: Renamed as...
+ * nat/x86-gcc-cpuid.h: New file. All type, function and variable
+ name prefixes changed from "i386_" to "x86_". All references
+ updated.
+ * nat/i386-dregs.h: Renamed as...
+ * nat/x86-dregs.h: New file. All type, function and variable name
+ prefixes changed from "i386_" to "x86_". All references updated.
+ * nat/i386-dregs.c: Renamed as...
+ * nat/x86-dregs.c: New file. All type, function and variable name
+ prefixes changed from "i386_" to "x86_". All references updated.
+
2014-09-01 Maciej W. Rozycki <macro@codesourcery.com>
* varobj.c (_initialize_varobj): Move to the end of file.
HFILES_NO_SRCDIR = \
common/gdb_signals.h nat/gdb_thread_db.h common/gdb_vecs.h \
-common/i386-xstate.h nat/linux-ptrace.h nat/mips-linux-watch.h \
+common/x86-xstate.h nat/linux-ptrace.h nat/mips-linux-watch.h \
proc-utils.h aarch64-tdep.h arm-tdep.h ax-gdb.h ppcfbsd-tdep.h \
ppcnbsd-tdep.h cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h amd64bsd-nat.h \
amd64-darwin-tdep.h charset-list.h \
config/djgpp/langinfo.h config/djgpp/nl_types.h darwin-nat.h \
dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \
-i386-darwin-tdep.h i386-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \
+i386-darwin-tdep.h x86-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \
osdata.h procfs.h python/py-event.h python/py-events.h python/py-stopevent.h \
python/python-internal.h python/python.h ravenscar-thread.h record.h \
record-full.h solib-aix.h \
common/format.h common/host-defs.h utils.h common/queue.h \
nat/linux-osdata.h gdb-dlfcn.h auto-load.h probe.h stap-probe.h \
gdb_bfd.h sparc-ravenscar-thread.h ppc-ravenscar-thread.h nat/linux-btrace.h \
-ctf.h nat/i386-cpuid.h nat/i386-gcc-cpuid.h target/resume.h \
+ctf.h nat/x86-cpuid.h nat/x86-gcc-cpuid.h target/resume.h \
target/wait.h target/waitstatus.h nat/linux-nat.h nat/linux-waitpid.h \
-common/print-utils.h common/rsp-low.h nat/i386-dregs.h x86-linux-nat.h \
+common/print-utils.h common/rsp-low.h nat/x86-dregs.h x86-linux-nat.h \
i386-linux-nat.h common/common-defs.h common/errors.h common/common-types.h \
common/common-debug.h common/cleanups.h common/gdb_setjmp.h \
common/common-exceptions.h
i387-tdep.c \
i386-darwin-tdep.c i386-darwin-nat.c \
i386-dicos-tdep.c \
- i386-linux-tdep.c i386-nat.c \
+ i386-linux-tdep.c x86-nat.c \
i386-sol2-nat.c i386-sol2-tdep.c \
i386gnu-nat.c i386gnu-tdep.c \
ia64-hpux-nat.c ia64-hpux-tdep.c \
# Need to explicitly specify the compile rule as make will do nothing
# or try to compile the object file into the sub-directory.
-i386-dregs.o: ${srcdir}/nat/i386-dregs.c
- $(COMPILE) $(srcdir)/nat/i386-dregs.c
+x86-dregs.o: ${srcdir}/nat/x86-dregs.c
+ $(COMPILE) $(srcdir)/nat/x86-dregs.c
$(POSTCOMPILE)
linux-btrace.o: ${srcdir}/nat/linux-btrace.c
#include "amd64-tdep.h"
#include "amd64-linux-tdep.h"
#include "i386-linux-tdep.h"
-#include "i386-xstate.h"
+#include "x86-xstate.h"
#include "x86-linux-nat.h"
if (have_ptrace_getregset)
{
- char xstateregs[I386_XSTATE_MAX_SIZE];
+ char xstateregs[X86_XSTATE_MAX_SIZE];
struct iovec iov;
iov.iov_base = xstateregs;
if (have_ptrace_getregset)
{
- char xstateregs[I386_XSTATE_MAX_SIZE];
+ char xstateregs[X86_XSTATE_MAX_SIZE];
struct iovec iov;
iov.iov_base = xstateregs;
#include "amd64-linux-tdep.h"
#include "i386-linux-tdep.h"
#include "linux-tdep.h"
-#include "i386-xstate.h"
+#include "x86-xstate.h"
#include "amd64-tdep.h"
#include "solib-svr4.h"
{
{ ".reg", 27 * 8, "general-purpose" },
{ ".reg2", 512, "floating-point" },
- { ".reg-xstate", I386_XSTATE_MAX_SIZE, "XSAVE extended state" },
+ { ".reg-xstate", X86_XSTATE_MAX_SIZE, "XSAVE extended state" },
{ NULL, 0 }
};
/* Linux/x86-64. */
uint64_t xcr0 = i386_linux_core_read_xcr0 (abfd);
- switch (xcr0 & I386_XSTATE_ALL_MASK)
+ switch (xcr0 & X86_XSTATE_ALL_MASK)
{
- case I386_XSTATE_MPX_AVX512_MASK:
- case I386_XSTATE_AVX512_MASK:
+ case X86_XSTATE_MPX_AVX512_MASK:
+ case X86_XSTATE_AVX512_MASK:
if (gdbarch_ptr_bit (gdbarch) == 32)
return tdesc_x32_avx512_linux;
else
return tdesc_amd64_avx512_linux;
- case I386_XSTATE_MPX_MASK:
+ case X86_XSTATE_MPX_MASK:
if (gdbarch_ptr_bit (gdbarch) == 32)
return tdesc_x32_avx_linux; /* No x32 MPX falling back to AVX. */
else
return tdesc_amd64_mpx_linux;
- case I386_XSTATE_AVX_MASK:
+ case X86_XSTATE_AVX_MASK:
if (gdbarch_ptr_bit (gdbarch) == 32)
return tdesc_x32_avx_linux;
else
#include "defs.h"
#include "windows-nat.h"
-#include "i386-nat.h"
+#include "x86-nat.h"
#include "amd64-tdep.h"
#include <windows.h>
{
windows_set_context_register_offsets (mappings);
windows_set_segment_register_p (amd64_windows_segment_register_p);
- i386_set_debug_register_length (8);
+ x86_set_debug_register_length (8);
}
#include "amd64-tdep.h"
#include "amd64-nat.h"
#include "amd64bsd-nat.h"
-#include "i386-nat.h"
+#include "x86-nat.h"
\f
/* Offset in `struct reg' where MEMBER is stored. */
amd64fbsd_mourn_inferior (struct target_ops *ops)
{
#ifdef HAVE_PT_GETDBREGS
- i386_cleanup_dregs ();
+ x86_cleanup_dregs ();
#endif
super_mourn_inferior (ops);
}
#ifdef HAVE_PT_GETDBREGS
- i386_use_watchpoints (t);
+ x86_use_watchpoints (t);
- i386_dr_low.set_control = amd64bsd_dr_set_control;
- i386_dr_low.set_addr = amd64bsd_dr_set_addr;
- i386_dr_low.get_addr = amd64bsd_dr_get_addr;
- i386_dr_low.get_status = amd64bsd_dr_get_status;
- i386_dr_low.get_control = amd64bsd_dr_get_control;
- i386_set_debug_register_length (8);
+ x86_dr_low.set_control = amd64bsd_dr_set_control;
+ x86_dr_low.set_addr = amd64bsd_dr_set_addr;
+ x86_dr_low.get_addr = amd64bsd_dr_get_addr;
+ x86_dr_low.get_status = amd64bsd_dr_get_status;
+ x86_dr_low.get_control = amd64bsd_dr_get_control;
+ x86_set_debug_register_length (8);
#endif /* HAVE_PT_GETDBREGS */
+++ /dev/null
-/* Common code for i386 XSAVE extended state.
-
- Copyright (C) 2010-2014 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef I386_XSTATE_H
-#define I386_XSTATE_H 1
-
-/* The extended state feature bits. */
-#define I386_XSTATE_X87 (1ULL << 0)
-#define I386_XSTATE_SSE (1ULL << 1)
-#define I386_XSTATE_AVX (1ULL << 2)
-#define I386_XSTATE_BNDREGS (1ULL << 3)
-#define I386_XSTATE_BNDCFG (1ULL << 4)
-#define I386_XSTATE_MPX (I386_XSTATE_BNDREGS | I386_XSTATE_BNDCFG)
-
-/* AVX 512 adds three feature bits. All three must be enabled. */
-#define I386_XSTATE_K (1ULL << 5)
-#define I386_XSTATE_ZMM_H (1ULL << 6)
-#define I386_XSTATE_ZMM (1ULL << 7)
-#define I386_XSTATE_AVX512 (I386_XSTATE_K | I386_XSTATE_ZMM_H \
- | I386_XSTATE_ZMM)
-
-/* Supported mask and size of the extended state. */
-#define I386_XSTATE_X87_MASK I386_XSTATE_X87
-#define I386_XSTATE_SSE_MASK (I386_XSTATE_X87 | I386_XSTATE_SSE)
-#define I386_XSTATE_AVX_MASK (I386_XSTATE_SSE_MASK | I386_XSTATE_AVX)
-#define I386_XSTATE_MPX_MASK (I386_XSTATE_AVX_MASK | I386_XSTATE_MPX)
-#define I386_XSTATE_AVX512_MASK (I386_XSTATE_AVX_MASK | I386_XSTATE_AVX512)
-#define I386_XSTATE_MPX_AVX512_MASK (I386_XSTATE_MPX_MASK | I386_XSTATE_AVX512)
-
-#define I386_XSTATE_ALL_MASK (I386_XSTATE_MPX_AVX512_MASK)
-
-#define I386_XSTATE_SSE_SIZE 576
-#define I386_XSTATE_AVX_SIZE 832
-#define I386_XSTATE_BNDREGS_SIZE 1024
-#define I386_XSTATE_BNDCFG_SIZE 1088
-#define I386_XSTATE_AVX512_SIZE 2688
-#define I386_XSTATE_MAX_SIZE 2688
-
-
-/* In case one of the MPX XCR0 bits is set we consider we have MPX. */
-#define HAS_MPX(XCR0) (((XCR0) & I386_XSTATE_MPX) != 0)
-#define HAS_AVX(XCR0) (((XCR0) & I386_XSTATE_AVX) != 0)
-#define HAS_AVX512(XCR0) (((XCR0) & I386_XSTATE_AVX512) != 0)
-
-/* Get I386 XSAVE extended state size. */
-#define I386_XSTATE_SIZE(XCR0) \
- (HAS_AVX512 (XCR0) ? I386_XSTATE_AVX512_SIZE : \
- (HAS_MPX (XCR0) ? I386_XSTATE_BNDCFG_SIZE : \
- (HAS_AVX (XCR0) ? I386_XSTATE_AVX_SIZE : I386_XSTATE_SSE_SIZE)))
-
-#endif /* I386_XSTATE_H */
--- /dev/null
+/* Common code for x86 XSAVE extended state.
+
+ Copyright (C) 2010-2014 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#ifndef X86_XSTATE_H
+#define X86_XSTATE_H 1
+
+/* The extended state feature bits. */
+#define X86_XSTATE_X87 (1ULL << 0)
+#define X86_XSTATE_SSE (1ULL << 1)
+#define X86_XSTATE_AVX (1ULL << 2)
+#define X86_XSTATE_BNDREGS (1ULL << 3)
+#define X86_XSTATE_BNDCFG (1ULL << 4)
+#define X86_XSTATE_MPX (X86_XSTATE_BNDREGS | X86_XSTATE_BNDCFG)
+
+/* AVX 512 adds three feature bits. All three must be enabled. */
+#define X86_XSTATE_K (1ULL << 5)
+#define X86_XSTATE_ZMM_H (1ULL << 6)
+#define X86_XSTATE_ZMM (1ULL << 7)
+#define X86_XSTATE_AVX512 (X86_XSTATE_K | X86_XSTATE_ZMM_H \
+ | X86_XSTATE_ZMM)
+
+/* Supported mask and size of the extended state. */
+#define X86_XSTATE_X87_MASK X86_XSTATE_X87
+#define X86_XSTATE_SSE_MASK (X86_XSTATE_X87 | X86_XSTATE_SSE)
+#define X86_XSTATE_AVX_MASK (X86_XSTATE_SSE_MASK | X86_XSTATE_AVX)
+#define X86_XSTATE_MPX_MASK (X86_XSTATE_AVX_MASK | X86_XSTATE_MPX)
+#define X86_XSTATE_AVX512_MASK (X86_XSTATE_AVX_MASK | X86_XSTATE_AVX512)
+#define X86_XSTATE_MPX_AVX512_MASK (X86_XSTATE_MPX_MASK | X86_XSTATE_AVX512)
+
+#define X86_XSTATE_ALL_MASK (X86_XSTATE_MPX_AVX512_MASK)
+
+#define X86_XSTATE_SSE_SIZE 576
+#define X86_XSTATE_AVX_SIZE 832
+#define X86_XSTATE_BNDREGS_SIZE 1024
+#define X86_XSTATE_BNDCFG_SIZE 1088
+#define X86_XSTATE_AVX512_SIZE 2688
+#define X86_XSTATE_MAX_SIZE 2688
+
+
+/* In case one of the MPX XCR0 bits is set we consider we have MPX. */
+#define HAS_MPX(XCR0) (((XCR0) & X86_XSTATE_MPX) != 0)
+#define HAS_AVX(XCR0) (((XCR0) & X86_XSTATE_AVX) != 0)
+#define HAS_AVX512(XCR0) (((XCR0) & X86_XSTATE_AVX512) != 0)
+
+/* Get I386 XSAVE extended state size. */
+#define X86_XSTATE_SIZE(XCR0) \
+ (HAS_AVX512 (XCR0) ? X86_XSTATE_AVX512_SIZE : \
+ (HAS_MPX (XCR0) ? X86_XSTATE_BNDCFG_SIZE : \
+ (HAS_AVX (XCR0) ? X86_XSTATE_AVX_SIZE : X86_XSTATE_SSE_SIZE)))
+
+#endif /* X86_XSTATE_H */
MH_CFLAGS=
-NATDEPFILES= i386-nat.o i386-dregs.o windows-nat.o i386-windows-nat.o
+NATDEPFILES= x86-nat.o x86-dregs.o windows-nat.o i386-windows-nat.o
XM_CLIBS=
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>. */
-NATDEPFILES= i386-nat.o i386-dregs.o windows-nat.o amd64-windows-nat.o
+NATDEPFILES= x86-nat.o x86-dregs.o windows-nat.o amd64-windows-nat.o
# Host: IA86 running Darwin
NATDEPFILES = fork-child.o darwin-nat.o \
- i386-darwin-nat.o i386-nat.o i386-dregs.o amd64-nat.o darwin-nat-info.o
+ i386-darwin-nat.o x86-nat.o x86-dregs.o amd64-nat.o darwin-nat-info.o
# Host: FreeBSD/i386
NATDEPFILES= fork-child.o inf-ptrace.o \
- fbsd-nat.o i386-nat.o i386-dregs.o i386bsd-nat.o i386fbsd-nat.o \
+ fbsd-nat.o x86-nat.o x86-dregs.o i386bsd-nat.o i386fbsd-nat.o \
bsd-kvm.o
NAT_FILE= nm-fbsd.h
HAVE_NATIVE_GCORE_HOST = 1
# Host: FreeBSD/amd64
NATDEPFILES= fork-child.o inf-ptrace.o \
fbsd-nat.o amd64-nat.o amd64bsd-nat.o amd64fbsd-nat.o \
- bsd-kvm.o i386-nat.o i386-dregs.o
+ bsd-kvm.o x86-nat.o x86-dregs.o
HAVE_NATIVE_GCORE_HOST = 1
LOADLIBES= -lkvm
# We include several header files from config/djgpp
MH_CFLAGS= -I$(srcdir)/config/djgpp
-NATDEPFILES= go32-nat.o i386-nat.o i386-dregs.o
+NATDEPFILES= go32-nat.o x86-nat.o x86-dregs.o
HOST_IPC=
CC= gcc
NAT_FILE= config/nm-linux.h
NATDEPFILES= inf-ptrace.o fork-child.o \
- i386-nat.o i386-dregs.o i386-linux-nat.o x86-linux-nat.o \
+ x86-nat.o x86-dregs.o i386-linux-nat.o x86-linux-nat.o \
proc-service.o linux-thread-db.o \
linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
linux-btrace.o linux-waitpid.o
# Host: GNU/Linux x86-64
NATDEPFILES= inf-ptrace.o fork-child.o \
- i386-nat.o i386-dregs.o amd64-nat.o amd64-linux-nat.o \
+ x86-nat.o x86-dregs.o amd64-nat.o amd64-linux-nat.o \
x86-linux-nat.o \
linux-nat.o linux-osdata.o \
proc-service.o linux-thread-db.o linux-fork.o \
MH_CFLAGS=
-NATDEPFILES= i386-nat.o i386-dregs.o windows-nat.o i386-windows-nat.o
+NATDEPFILES= x86-nat.o x86-dregs.o windows-nat.o i386-windows-nat.o
XM_CLIBS=
-NATDEPFILES= i386-nat.o i386-dregs.o windows-nat.o amd64-windows-nat.o
+NATDEPFILES= x86-nat.o x86-dregs.o windows-nat.o amd64-windows-nat.o
+2014-09-02 Gary Benson <gbenson@redhat.com>
+
+ * i386-low.h: Renamed as...
+ * x86-low.h: New file. All type, function and variable name
+ prefixes changed from "i386_" to "x86_". All references updated.
+ * i386-low.c: Renamed as...
+ * x86-low.c: New file. All type, function and variable name
+ prefixes changed from "i386_" to "x86_". All references updated.
+
2014-09-02 Gary Benson <gbenson@redhat.com>
* linux-x86-low.c (x86_linux_new_process): Use XCNEW.
$(srcdir)/thread-db.c $(srcdir)/utils.c $(srcdir)/debug.c \
$(srcdir)/linux-arm-low.c $(srcdir)/linux-bfin-low.c \
$(srcdir)/linux-cris-low.c $(srcdir)/linux-crisv32-low.c \
- ${srcdir}/i386-low.c $(srcdir)/i387-fp.c \
+ ${srcdir}/x86-low.c $(srcdir)/i387-fp.c \
$(srcdir)/linux-ia64-low.c $(srcdir)/linux-low.c \
$(srcdir)/linux-m32r-low.c \
$(srcdir)/linux-m68k-low.c $(srcdir)/linux-mips-low.c \
# Native object files rules from ../nat
-i386-dregs.o: ../nat/i386-dregs.c
+x86-dregs.o: ../nat/x86-dregs.c
$(COMPILE) $<
$(POSTCOMPILE)
linux-btrace.o: ../nat/linux-btrace.c
srv_linux_thread_db=yes
;;
i[34567]86-*-cygwin*) srv_regobj="$srv_i386_regobj"
- srv_tgtobj="i386-low.o i386-dregs.o win32-low.o win32-i386-low.o"
+ srv_tgtobj="x86-low.o x86-dregs.o win32-low.o win32-i386-low.o"
srv_xmlfiles="$srv_i386_xmlfiles"
;;
i[34567]86-*-linux*) srv_regobj="$srv_i386_linux_regobj"
srv_regobj="$srv_regobj $srv_amd64_linux_regobj"
srv_xmlfiles="${srv_xmlfiles} $srv_amd64_linux_xmlfiles"
fi
- srv_tgtobj="$srv_linux_obj linux-x86-low.o i386-low.o i386-dregs.o i387-fp.o"
+ srv_tgtobj="$srv_linux_obj linux-x86-low.o x86-low.o x86-dregs.o i387-fp.o"
srv_tgtobj="${srv_tgtobj} linux-btrace.o"
srv_linux_usrregs=yes
srv_linux_regsets=yes
;;
i[34567]86-*-mingw32ce*)
srv_regobj="$srv_i386_regobj"
- srv_tgtobj="i386-low.o i386-dregs.o win32-low.o win32-i386-low.o"
+ srv_tgtobj="x86-low.o x86-dregs.o win32-low.o win32-i386-low.o"
srv_tgtobj="${srv_tgtobj} wincecompat.o"
srv_xmlfiles="$srv_i386_xmlfiles"
# hostio_last_error implementation is in win32-low.c
srv_mingwce=yes
;;
i[34567]86-*-mingw*) srv_regobj="$srv_i386_regobj"
- srv_tgtobj="i386-low.o i386-dregs.o win32-low.o win32-i386-low.o"
+ srv_tgtobj="x86-low.o x86-dregs.o win32-low.o win32-i386-low.o"
srv_xmlfiles="$srv_i386_xmlfiles"
srv_mingw=yes
;;
srv_linux_thread_db=yes
;;
x86_64-*-linux*) srv_regobj="$srv_amd64_linux_regobj $srv_i386_linux_regobj"
- srv_tgtobj="$srv_linux_obj linux-x86-low.o i386-low.o i386-dregs.o i387-fp.o"
+ srv_tgtobj="$srv_linux_obj linux-x86-low.o x86-low.o x86-dregs.o i387-fp.o"
srv_tgtobj="${srv_tgtobj} linux-btrace.o"
srv_xmlfiles="$srv_i386_linux_xmlfiles $srv_amd64_linux_xmlfiles"
srv_linux_usrregs=yes # This is for i386 progs.
ipa_obj="${ipa_amd64_linux_regobj} linux-amd64-ipa.o"
;;
x86_64-*-mingw*) srv_regobj="$srv_amd64_regobj"
- srv_tgtobj="i386-low.o i386-dregs.o i387-fp.o win32-low.o win32-i386-low.o"
+ srv_tgtobj="x86-low.o x86-dregs.o i387-fp.o win32-low.o win32-i386-low.o"
srv_xmlfiles="$srv_i386_xmlfiles $srv_amd64_xmlfiles"
srv_mingw=yes
;;
x86_64-*-cygwin*) srv_regobj="$srv_amd64_regobj"
- srv_tgtobj="i386-low.o i386-dregs.o i387-fp.o win32-low.o win32-i386-low.o"
+ srv_tgtobj="x86-low.o x86-dregs.o i387-fp.o win32-low.o win32-i386-low.o"
srv_xmlfiles="$srv_i386_xmlfiles"
;;
+++ /dev/null
-/* Debug register code for the i386.
-
- Copyright (C) 2009-2014 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include "server.h"
-#include "i386-low.h"
-
-/* Clear the reference counts and forget everything we knew about the
- debug registers. */
-
-void
-i386_low_init_dregs (struct i386_debug_reg_state *state)
-{
- int i;
-
- ALL_DEBUG_REGISTERS (i)
- {
- state->dr_mirror[i] = 0;
- state->dr_ref_count[i] = 0;
- }
- state->dr_control_mirror = 0;
- state->dr_status_mirror = 0;
-}
+++ /dev/null
-/* Misc. low level support for i386.
-
- Copyright (C) 2009-2014 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-
-#include "nat/i386-dregs.h"
-
-/* Initialize STATE. */
-extern void i386_low_init_dregs (struct i386_debug_reg_state *state);
#include "server.h"
#include "i387-fp.h"
-#include "i386-xstate.h"
+#include "x86-xstate.h"
static const int num_mpx_bnd_registers = 4;
static const int num_mpx_cfg_registers = 2;
zero. */
if (clear_bv)
{
- if ((clear_bv & I386_XSTATE_X87))
+ if ((clear_bv & X86_XSTATE_X87))
for (i = 0; i < 8; i++)
memset (((char *) &fp->st_space[0]) + i * 16, 0, 10);
- if ((clear_bv & I386_XSTATE_SSE))
+ if ((clear_bv & X86_XSTATE_SSE))
for (i = 0; i < num_xmm_registers; i++)
memset (((char *) &fp->xmm_space[0]) + i * 16, 0, 16);
- if ((clear_bv & I386_XSTATE_AVX))
+ if ((clear_bv & X86_XSTATE_AVX))
for (i = 0; i < num_xmm_registers; i++)
memset (((char *) &fp->ymmh_space[0]) + i * 16, 0, 16);
- if ((clear_bv & I386_XSTATE_BNDREGS))
+ if ((clear_bv & X86_XSTATE_BNDREGS))
for (i = 0; i < num_mpx_bnd_registers; i++)
memset (((char *) &fp->mpx_bnd_space[0]) + i * 16, 0, 16);
- if ((clear_bv & I386_XSTATE_BNDCFG))
+ if ((clear_bv & X86_XSTATE_BNDCFG))
for (i = 0; i < num_mpx_cfg_registers; i++)
memset (((char *) &fp->mpx_cfg_space[0]) + i * 8, 0, 8);
- if ((clear_bv & I386_XSTATE_K))
+ if ((clear_bv & X86_XSTATE_K))
for (i = 0; i < num_avx512_k_registers; i++)
memset (((char *) &fp->k_space[0]) + i * 8, 0, 8);
- if ((clear_bv & I386_XSTATE_ZMM_H))
+ if ((clear_bv & X86_XSTATE_ZMM_H))
for (i = 0; i < num_avx512_zmmh_low_registers; i++)
memset (((char *) &fp->zmmh_low_space[0]) + i * 32, 0, 32);
- if ((clear_bv & I386_XSTATE_ZMM))
+ if ((clear_bv & X86_XSTATE_ZMM))
{
for (i = 0; i < num_avx512_zmmh_high_registers; i++)
memset (((char *) &fp->zmmh_low_space[0]) + 32 + i * 64, 0, 32);
}
/* Check if any x87 registers are changed. */
- if ((x86_xcr0 & I386_XSTATE_X87))
+ if ((x86_xcr0 & X86_XSTATE_X87))
{
int st0_regnum = find_regno (regcache->tdesc, "st0");
p = ((char *) &fp->st_space[0]) + i * 16;
if (memcmp (raw, p, 10))
{
- xstate_bv |= I386_XSTATE_X87;
+ xstate_bv |= X86_XSTATE_X87;
memcpy (p, raw, 10);
}
}
}
/* Check if any SSE registers are changed. */
- if ((x86_xcr0 & I386_XSTATE_SSE))
+ if ((x86_xcr0 & X86_XSTATE_SSE))
{
int xmm0_regnum = find_regno (regcache->tdesc, "xmm0");
p = ((char *) &fp->xmm_space[0]) + i * 16;
if (memcmp (raw, p, 16))
{
- xstate_bv |= I386_XSTATE_SSE;
+ xstate_bv |= X86_XSTATE_SSE;
memcpy (p, raw, 16);
}
}
}
/* Check if any AVX registers are changed. */
- if ((x86_xcr0 & I386_XSTATE_AVX))
+ if ((x86_xcr0 & X86_XSTATE_AVX))
{
int ymm0h_regnum = find_regno (regcache->tdesc, "ymm0h");
p = ((char *) &fp->ymmh_space[0]) + i * 16;
if (memcmp (raw, p, 16))
{
- xstate_bv |= I386_XSTATE_AVX;
+ xstate_bv |= X86_XSTATE_AVX;
memcpy (p, raw, 16);
}
}
}
/* Check if any bound register has changed. */
- if ((x86_xcr0 & I386_XSTATE_BNDREGS))
+ if ((x86_xcr0 & X86_XSTATE_BNDREGS))
{
int bnd0r_regnum = find_regno (regcache->tdesc, "bnd0raw");
p = ((char *) &fp->mpx_bnd_space[0]) + i * 16;
if (memcmp (raw, p, 16))
{
- xstate_bv |= I386_XSTATE_BNDREGS;
+ xstate_bv |= X86_XSTATE_BNDREGS;
memcpy (p, raw, 16);
}
}
}
/* Check if any status register has changed. */
- if ((x86_xcr0 & I386_XSTATE_BNDCFG))
+ if ((x86_xcr0 & X86_XSTATE_BNDCFG))
{
int bndcfg_regnum = find_regno (regcache->tdesc, "bndcfgu");
p = ((char *) &fp->mpx_cfg_space[0]) + i * 8;
if (memcmp (raw, p, 8))
{
- xstate_bv |= I386_XSTATE_BNDCFG;
+ xstate_bv |= X86_XSTATE_BNDCFG;
memcpy (p, raw, 8);
}
}
}
/* Check if any K registers are changed. */
- if ((x86_xcr0 & I386_XSTATE_K))
+ if ((x86_xcr0 & X86_XSTATE_K))
{
int k0_regnum = find_regno (regcache->tdesc, "k0");
p = ((char *) &fp->k_space[0]) + i * 8;
if (memcmp (raw, p, 8) != 0)
{
- xstate_bv |= I386_XSTATE_K;
+ xstate_bv |= X86_XSTATE_K;
memcpy (p, raw, 8);
}
}
}
/* Check if any of ZMM0H-ZMM15H registers are changed. */
- if ((x86_xcr0 & I386_XSTATE_ZMM_H))
+ if ((x86_xcr0 & X86_XSTATE_ZMM_H))
{
int zmm0h_regnum = find_regno (regcache->tdesc, "zmm0h");
p = ((char *) &fp->zmmh_low_space[0]) + i * 32;
if (memcmp (raw, p, 32) != 0)
{
- xstate_bv |= I386_XSTATE_ZMM_H;
+ xstate_bv |= X86_XSTATE_ZMM_H;
memcpy (p, raw, 32);
}
}
}
/* Check if any of ZMM16H-ZMM31H registers are changed. */
- if ((x86_xcr0 & I386_XSTATE_ZMM))
+ if ((x86_xcr0 & X86_XSTATE_ZMM))
{
int zmm16h_regnum = find_regno (regcache->tdesc, "zmm16h");
p = ((char *) &fp->zmmh_low_space[0]) + 32 + i * 64;
if (memcmp (raw, p, 32) != 0)
{
- xstate_bv |= I386_XSTATE_ZMM;
+ xstate_bv |= X86_XSTATE_ZMM;
memcpy (p, raw, 32);
}
}
}
/* Check if any XMM_AVX512 registers are changed. */
- if ((x86_xcr0 & I386_XSTATE_ZMM))
+ if ((x86_xcr0 & X86_XSTATE_ZMM))
{
int xmm_avx512_regnum = find_regno (regcache->tdesc, "xmm16");
p = ((char *) &fp->zmmh_high_space[0]) + i * 64;
if (memcmp (raw, p, 16) != 0)
{
- xstate_bv |= I386_XSTATE_ZMM;
+ xstate_bv |= X86_XSTATE_ZMM;
memcpy (p, raw, 16);
}
}
}
/* Check if any YMMH_AVX512 registers are changed. */
- if ((x86_xcr0 & I386_XSTATE_ZMM))
+ if ((x86_xcr0 & X86_XSTATE_ZMM))
{
int ymmh_avx512_regnum = find_regno (regcache->tdesc, "ymm16h");
p = ((char *) &fp->zmmh_high_space[0]) + 16 + i * 64;
if (memcmp (raw, p, 16) != 0)
{
- xstate_bv |= I386_XSTATE_ZMM;
+ xstate_bv |= X86_XSTATE_ZMM;
memcpy (p, raw, 16);
}
}
clear_bv = (~fp->xstate_bv) & x86_xcr0;
/* Check if any x87 registers are changed. */
- if ((x86_xcr0 & I386_XSTATE_X87) != 0)
+ if ((x86_xcr0 & X86_XSTATE_X87) != 0)
{
int st0_regnum = find_regno (regcache->tdesc, "st0");
- if ((clear_bv & I386_XSTATE_X87) != 0)
+ if ((clear_bv & X86_XSTATE_X87) != 0)
{
for (i = 0; i < 8; i++)
supply_register_zeroed (regcache, i + st0_regnum);
}
}
- if ((x86_xcr0 & I386_XSTATE_SSE) != 0)
+ if ((x86_xcr0 & X86_XSTATE_SSE) != 0)
{
int xmm0_regnum = find_regno (regcache->tdesc, "xmm0");
- if ((clear_bv & I386_XSTATE_SSE))
+ if ((clear_bv & X86_XSTATE_SSE))
{
for (i = 0; i < num_xmm_registers; i++)
supply_register_zeroed (regcache, i + xmm0_regnum);
}
}
- if ((x86_xcr0 & I386_XSTATE_AVX) != 0)
+ if ((x86_xcr0 & X86_XSTATE_AVX) != 0)
{
int ymm0h_regnum = find_regno (regcache->tdesc, "ymm0h");
- if ((clear_bv & I386_XSTATE_AVX) != 0)
+ if ((clear_bv & X86_XSTATE_AVX) != 0)
{
for (i = 0; i < num_xmm_registers; i++)
supply_register_zeroed (regcache, i + ymm0h_regnum);
}
}
- if ((x86_xcr0 & I386_XSTATE_BNDREGS))
+ if ((x86_xcr0 & X86_XSTATE_BNDREGS))
{
int bnd0r_regnum = find_regno (regcache->tdesc, "bnd0raw");
- if ((clear_bv & I386_XSTATE_BNDREGS) != 0)
+ if ((clear_bv & X86_XSTATE_BNDREGS) != 0)
{
for (i = 0; i < num_mpx_bnd_registers; i++)
supply_register_zeroed (regcache, i + bnd0r_regnum);
}
- if ((x86_xcr0 & I386_XSTATE_BNDCFG))
+ if ((x86_xcr0 & X86_XSTATE_BNDCFG))
{
int bndcfg_regnum = find_regno (regcache->tdesc, "bndcfgu");
- if ((clear_bv & I386_XSTATE_BNDCFG) != 0)
+ if ((clear_bv & X86_XSTATE_BNDCFG) != 0)
{
for (i = 0; i < num_mpx_cfg_registers; i++)
supply_register_zeroed (regcache, i + bndcfg_regnum);
}
}
- if ((x86_xcr0 & I386_XSTATE_K) != 0)
+ if ((x86_xcr0 & X86_XSTATE_K) != 0)
{
int k0_regnum = find_regno (regcache->tdesc, "k0");
- if ((clear_bv & I386_XSTATE_K) != 0)
+ if ((clear_bv & X86_XSTATE_K) != 0)
{
for (i = 0; i < num_avx512_k_registers; i++)
supply_register_zeroed (regcache, i + k0_regnum);
}
}
- if ((x86_xcr0 & I386_XSTATE_ZMM_H) != 0)
+ if ((x86_xcr0 & X86_XSTATE_ZMM_H) != 0)
{
int zmm0h_regnum = find_regno (regcache->tdesc, "zmm0h");
- if ((clear_bv & I386_XSTATE_ZMM_H) != 0)
+ if ((clear_bv & X86_XSTATE_ZMM_H) != 0)
{
for (i = 0; i < num_avx512_zmmh_low_registers; i++)
supply_register_zeroed (regcache, i + zmm0h_regnum);
}
}
- if ((x86_xcr0 & I386_XSTATE_ZMM) != 0)
+ if ((x86_xcr0 & X86_XSTATE_ZMM) != 0)
{
int zmm16h_regnum = find_regno (regcache->tdesc, "zmm16h");
int ymm16h_regnum = find_regno (regcache->tdesc, "ymm16h");
int xmm16_regnum = find_regno (regcache->tdesc, "xmm16");
- if ((clear_bv & I386_XSTATE_ZMM) != 0)
+ if ((clear_bv & X86_XSTATE_ZMM) != 0)
{
for (i = 0; i < num_avx512_zmmh_high_registers; i++)
supply_register_zeroed (regcache, i + zmm16h_regnum);
}
/* Default to SSE. */
-unsigned long long x86_xcr0 = I386_XSTATE_SSE_MASK;
+unsigned long long x86_xcr0 = X86_XSTATE_SSE_MASK;
#include <inttypes.h>
#include "linux-low.h"
#include "i387-fp.h"
-#include "i386-low.h"
-#include "i386-xstate.h"
+#include "x86-low.h"
+#include "x86-xstate.h"
#include "gdb_proc_service.h"
/* Don't include elf/common.h if linux/elf.h got included by
struct arch_process_info
{
- struct i386_debug_reg_state debug_reg_state;
+ struct x86_debug_reg_state debug_reg_state;
};
/* Per-thread arch-specific data we want to keep. */
/* Update the inferior's debug register REGNUM from STATE. */
static void
-i386_dr_low_set_addr (int regnum, CORE_ADDR addr)
+x86_dr_low_set_addr (int regnum, CORE_ADDR addr)
{
/* Only update the threads of this process. */
int pid = pid_of (current_inferior);
/* Return the inferior's debug register REGNUM. */
static CORE_ADDR
-i386_dr_low_get_addr (int regnum)
+x86_dr_low_get_addr (int regnum)
{
ptid_t ptid = ptid_of (current_inferior);
/* Update the inferior's DR7 debug control register from STATE. */
static void
-i386_dr_low_set_control (unsigned long control)
+x86_dr_low_set_control (unsigned long control)
{
/* Only update the threads of this process. */
int pid = pid_of (current_inferior);
/* Return the inferior's DR7 debug control register. */
static unsigned long
-i386_dr_low_get_control (void)
+x86_dr_low_get_control (void)
{
ptid_t ptid = ptid_of (current_inferior);
and record it in STATE. */
static unsigned long
-i386_dr_low_get_status (void)
+x86_dr_low_get_status (void)
{
ptid_t ptid = ptid_of (current_inferior);
}
/* Low-level function vector. */
-struct i386_dr_low_type i386_dr_low =
+struct x86_dr_low_type x86_dr_low =
{
- i386_dr_low_set_control,
- i386_dr_low_set_addr,
- i386_dr_low_get_addr,
- i386_dr_low_get_status,
- i386_dr_low_get_control,
+ x86_dr_low_set_control,
+ x86_dr_low_set_addr,
+ x86_dr_low_get_addr,
+ x86_dr_low_get_status,
+ x86_dr_low_get_control,
sizeof (void *),
};
\f
{
enum target_hw_bp_type hw_type
= raw_bkpt_type_to_target_hw_bp_type (type);
- struct i386_debug_reg_state *state
+ struct x86_debug_reg_state *state
= &proc->private->arch_private->debug_reg_state;
- return i386_dr_insert_watchpoint (state, hw_type, addr, size);
+ return x86_dr_insert_watchpoint (state, hw_type, addr, size);
}
default:
{
enum target_hw_bp_type hw_type
= raw_bkpt_type_to_target_hw_bp_type (type);
- struct i386_debug_reg_state *state
+ struct x86_debug_reg_state *state
= &proc->private->arch_private->debug_reg_state;
- return i386_dr_remove_watchpoint (state, hw_type, addr, size);
+ return x86_dr_remove_watchpoint (state, hw_type, addr, size);
}
default:
/* Unsupported. */
x86_stopped_by_watchpoint (void)
{
struct process_info *proc = current_process ();
- return i386_dr_stopped_by_watchpoint (&proc->private->arch_private->debug_reg_state);
+ return x86_dr_stopped_by_watchpoint (&proc->private->arch_private->debug_reg_state);
}
static CORE_ADDR
{
struct process_info *proc = current_process ();
CORE_ADDR addr;
- if (i386_dr_stopped_data_address (&proc->private->arch_private->debug_reg_state,
- &addr))
+ if (x86_dr_stopped_data_address (&proc->private->arch_private->debug_reg_state,
+ &addr))
return addr;
return 0;
}
{
struct arch_process_info *info = XCNEW (struct arch_process_info);
- i386_low_init_dregs (&info->debug_reg_state);
+ x86_low_init_dregs (&info->debug_reg_state);
return info;
}
int i;
int pid = ptid_get_pid (ptid);
struct process_info *proc = find_process_pid (pid);
- struct i386_debug_reg_state *state
+ struct x86_debug_reg_state *state
= &proc->private->arch_private->debug_reg_state;
x86_linux_dr_set (ptid, DR_CONTROL, 0);
/* If we're setting a watchpoint, any change the inferior
had done itself to the debug registers needs to be
- discarded, otherwise, i386_dr_stopped_data_address can
+ discarded, otherwise, x86_dr_stopped_data_address can
get confused. */
clear_status = 1;
}
if (!use_xml)
{
- x86_xcr0 = I386_XSTATE_SSE_MASK;
+ x86_xcr0 = X86_XSTATE_SSE_MASK;
/* Don't use XML. */
#ifdef __x86_64__
if (have_ptrace_getregset == -1)
{
- uint64_t xstateregs[(I386_XSTATE_SSE_SIZE / sizeof (uint64_t))];
+ uint64_t xstateregs[(X86_XSTATE_SSE_SIZE / sizeof (uint64_t))];
struct iovec iov;
iov.iov_base = xstateregs;
for (regset = x86_regsets;
regset->fill_function != NULL; regset++)
if (regset->get_request == PTRACE_GETREGSET)
- regset->size = I386_XSTATE_SIZE (xcr0);
+ regset->size = X86_XSTATE_SIZE (xcr0);
else if (regset->type != GENERAL_REGS)
regset->size = 0;
}
/* Check the native XCR0 only if PTRACE_GETREGSET is available. */
xcr0_features = (have_ptrace_getregset
- && (xcr0 & I386_XSTATE_ALL_MASK));
+ && (xcr0 & X86_XSTATE_ALL_MASK));
if (xcr0_features)
x86_xcr0 = xcr0;
{
if (xcr0_features)
{
- switch (xcr0 & I386_XSTATE_ALL_MASK)
+ switch (xcr0 & X86_XSTATE_ALL_MASK)
{
- case I386_XSTATE_AVX512_MASK:
+ case X86_XSTATE_AVX512_MASK:
return tdesc_amd64_avx512_linux;
- case I386_XSTATE_MPX_MASK:
+ case X86_XSTATE_MPX_MASK:
return tdesc_amd64_mpx_linux;
- case I386_XSTATE_AVX_MASK:
+ case X86_XSTATE_AVX_MASK:
return tdesc_amd64_avx_linux;
default:
{
if (xcr0_features)
{
- switch (xcr0 & I386_XSTATE_ALL_MASK)
+ switch (xcr0 & X86_XSTATE_ALL_MASK)
{
- case I386_XSTATE_AVX512_MASK:
+ case X86_XSTATE_AVX512_MASK:
return tdesc_x32_avx512_linux;
- case I386_XSTATE_MPX_MASK: /* No MPX on x32. */
- case I386_XSTATE_AVX_MASK:
+ case X86_XSTATE_MPX_MASK: /* No MPX on x32. */
+ case X86_XSTATE_AVX_MASK:
return tdesc_x32_avx_linux;
default:
{
if (xcr0_features)
{
- switch (xcr0 & I386_XSTATE_ALL_MASK)
+ switch (xcr0 & X86_XSTATE_ALL_MASK)
{
- case (I386_XSTATE_AVX512_MASK):
+ case (X86_XSTATE_AVX512_MASK):
return tdesc_i386_avx512_linux;
- case (I386_XSTATE_MPX_MASK):
+ case (X86_XSTATE_MPX_MASK):
return tdesc_i386_mpx_linux;
- case (I386_XSTATE_AVX_MASK):
+ case (X86_XSTATE_AVX_MASK):
return tdesc_i386_avx_linux;
default:
#include "server.h"
#include "win32-low.h"
-#include "i386-low.h"
+#include "x86-low.h"
#ifndef CONTEXT_EXTENDED_REGISTERS
#define CONTEXT_EXTENDED_REGISTERS 0
extern const struct target_desc *tdesc_i386;
#endif
-static struct i386_debug_reg_state debug_reg_state;
+static struct x86_debug_reg_state debug_reg_state;
static int debug_registers_changed = 0;
static int debug_registers_used = 0;
/* Update the inferior's debug register REGNUM from STATE. */
static void
-i386_dr_low_set_addr (int regnum, CORE_ADDR addr)
+x86_dr_low_set_addr (int regnum, CORE_ADDR addr)
{
gdb_assert (DR_FIRSTADDR <= regnum && regnum <= DR_LASTADDR);
}
static CORE_ADDR
-i386_dr_low_get_addr (int regnum)
+x86_dr_low_get_addr (int regnum)
{
gdb_assert (DR_FIRSTADDR <= regnum && regnum <= DR_LASTADDR);
/* Update the inferior's DR7 debug control register from STATE. */
static void
-i386_dr_low_set_control (unsigned long control)
+x86_dr_low_set_control (unsigned long control)
{
/* debug_reg_state.dr_control_mirror is already set.
Just notify i386_set_thread_context, i386_thread_added
}
static unsigned long
-i386_dr_low_get_control (void)
+x86_dr_low_get_control (void)
{
return debug_reg_state.dr_control_mirror;
}
and record it in STATE. */
static unsigned long
-i386_dr_low_get_status (void)
+x86_dr_low_get_status (void)
{
/* We don't need to do anything here, the last call to thread_rec for
current_event.dwThreadId id has already set it. */
}
/* Low-level function vector. */
-struct i386_dr_low_type i386_dr_low =
+struct x86_dr_low_type x86_dr_low =
{
- i386_dr_low_set_control,
- i386_dr_low_set_addr,
- i386_dr_low_get_addr,
- i386_dr_low_get_status,
- i386_dr_low_get_control,
+ x86_dr_low_set_control,
+ x86_dr_low_set_addr,
+ x86_dr_low_get_addr,
+ x86_dr_low_get_status,
+ x86_dr_low_get_control,
sizeof (void *),
};
enum target_hw_bp_type hw_type
= raw_bkpt_type_to_target_hw_bp_type (type);
- return i386_dr_insert_watchpoint (&debug_reg_state,
- hw_type, addr, size);
+ return x86_dr_insert_watchpoint (&debug_reg_state,
+ hw_type, addr, size);
}
default:
/* Unsupported. */
enum target_hw_bp_type hw_type
= raw_bkpt_type_to_target_hw_bp_type (type);
- return i386_dr_remove_watchpoint (&debug_reg_state,
- hw_type, addr, size);
+ return x86_dr_remove_watchpoint (&debug_reg_state,
+ hw_type, addr, size);
}
default:
/* Unsupported. */
}
static int
-i386_stopped_by_watchpoint (void)
+x86_stopped_by_watchpoint (void)
{
- return i386_dr_stopped_by_watchpoint (&debug_reg_state);
+ return x86_dr_stopped_by_watchpoint (&debug_reg_state);
}
static CORE_ADDR
-i386_stopped_data_address (void)
+x86_stopped_data_address (void)
{
CORE_ADDR addr;
- if (i386_dr_stopped_data_address (&debug_reg_state, &addr))
+ if (x86_dr_stopped_data_address (&debug_reg_state, &addr))
return addr;
return 0;
}
static void
i386_initial_stuff (void)
{
- i386_low_init_dregs (&debug_reg_state);
+ x86_low_init_dregs (&debug_reg_state);
debug_registers_changed = 0;
debug_registers_used = 0;
}
if (th->tid == current_event->dwThreadId)
{
/* Copy dr values from the current thread. */
- struct i386_debug_reg_state *dr = &debug_reg_state;
+ struct x86_debug_reg_state *dr = &debug_reg_state;
dr->dr_mirror[0] = th->context.Dr0;
dr->dr_mirror[1] = th->context.Dr1;
dr->dr_mirror[2] = th->context.Dr2;
{
if (debug_registers_changed)
{
- struct i386_debug_reg_state *dr = &debug_reg_state;
+ struct x86_debug_reg_state *dr = &debug_reg_state;
th->context.Dr0 = dr->dr_mirror[0];
th->context.Dr1 = dr->dr_mirror[1];
th->context.Dr2 = dr->dr_mirror[2];
/* Set the debug registers for the new thread if they are used. */
if (debug_registers_used)
{
- struct i386_debug_reg_state *dr = &debug_reg_state;
+ struct x86_debug_reg_state *dr = &debug_reg_state;
th->context.ContextFlags = CONTEXT_DEBUG_REGISTERS;
GetThreadContext (th->h, &th->context);
i386_supports_z_point_type,
i386_insert_point,
i386_remove_point,
- i386_stopped_by_watchpoint,
- i386_stopped_data_address
+ x86_stopped_by_watchpoint,
+ x86_stopped_data_address
};
--- /dev/null
+/* Low level support for x86 (i386 and x86-64).
+
+ Copyright (C) 2009-2014 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "server.h"
+#include "x86-low.h"
+
+/* Clear the reference counts and forget everything we knew about the
+ debug registers. */
+
+void
+x86_low_init_dregs (struct x86_debug_reg_state *state)
+{
+ int i;
+
+ ALL_DEBUG_REGISTERS (i)
+ {
+ state->dr_mirror[i] = 0;
+ state->dr_ref_count[i] = 0;
+ }
+ state->dr_control_mirror = 0;
+ state->dr_status_mirror = 0;
+}
--- /dev/null
+/* Low level support for x86 (i386 and x86-64).
+
+ Copyright (C) 2009-2014 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+
+#include "nat/x86-dregs.h"
+
+/* Initialize STATE. */
+extern void x86_low_init_dregs (struct x86_debug_reg_state *state);
#include <fcntl.h>
-#include "i386-nat.h"
+#include "x86-nat.h"
#include "inferior.h"
#include "infrun.h"
#include "gdbthread.h"
#include "buildsym.h"
#include "i387-tdep.h"
#include "i386-tdep.h"
-#include "nat/i386-cpuid.h"
+#include "nat/x86-cpuid.h"
#include "value.h"
#include "regcache.h"
#include "top.h"
be nice if GDB itself would take care to remove all breakpoints
at all times, but it doesn't, probably under an assumption that
the OS cleans up when the debuggee exits. */
- i386_cleanup_dregs ();
+ x86_cleanup_dregs ();
ptid = inferior_ptid;
inferior_ptid = null_ptid;
{
/* CPUID with EAX = 0 returns the Vendor ID. */
#if 0
- /* Ideally we would use i386_cpuid(), but it needs someone to run
+ /* Ideally we would use x86_cpuid(), but it needs someone to run
native tests first to make sure things actually work. They should.
http://sourceware.org/ml/gdb-patches/2013-05/msg00164.html */
unsigned int eax, ebx, ecx, edx;
- if (i386_cpuid (0, &eax, &ebx, &ecx, &edx))
+ if (x86_cpuid (0, &eax, &ebx, &ecx, &edx))
{
cpuid_max = eax;
memcpy (&vendor[0], &ebx, 4);
#if 0
/* See comment above about cpuid usage. */
- i386_cpuid (1, &cpuid_eax, &cpuid_ebx, NULL, &cpuid_edx);
+ x86_cpuid (1, &cpuid_eax, &cpuid_ebx, NULL, &cpuid_edx);
#else
__asm__ __volatile__ ("movl $1, %%eax;"
"cpuid;"
{
struct target_ops *t = go32_target ();
- i386_dr_low.set_control = go32_set_dr7;
- i386_dr_low.set_addr = go32_set_dr;
- i386_dr_low.get_status = go32_get_dr6;
- i386_dr_low.get_control = go32_get_dr7;
- i386_dr_low.get_addr = go32_get_dr;
- i386_set_debug_register_length (4);
+ x86_dr_low.set_control = go32_set_dr7;
+ x86_dr_low.set_addr = go32_set_dr;
+ x86_dr_low.get_status = go32_get_dr6;
+ x86_dr_low.get_control = go32_get_dr7;
+ x86_dr_low.get_addr = go32_get_dr;
+ x86_set_debug_register_length (4);
- i386_use_watchpoints (t);
+ x86_use_watchpoints (t);
add_target (t);
/* Initialize child's cwd as empty to be initialized when starting
#include "arch-utils.h"
#include "gdbcore.h"
-#include "i386-nat.h"
+#include "x86-nat.h"
#include "darwin-nat.h"
#include "i386-darwin-tdep.h"
amd64_native_gregset32_num_regs = i386_darwin_thread_state_num_regs;
#endif
- i386_use_watchpoints (target);
+ x86_use_watchpoints (target);
- i386_dr_low.set_control = i386_darwin_dr_set_control;
- i386_dr_low.set_addr = i386_darwin_dr_set_addr;
- i386_dr_low.get_addr = i386_darwin_dr_get_addr;
- i386_dr_low.get_status = i386_darwin_dr_get_status;
- i386_dr_low.get_control = i386_darwin_dr_get_control;
+ x86_dr_low.set_control = i386_darwin_dr_set_control;
+ x86_dr_low.set_addr = i386_darwin_dr_set_addr;
+ x86_dr_low.get_addr = i386_darwin_dr_get_addr;
+ x86_dr_low.get_status = i386_darwin_dr_get_status;
+ x86_dr_low.get_control = i386_darwin_dr_get_control;
/* Let's assume that the kernel is 64 bits iff the executable is. */
#ifdef __x86_64__
- i386_set_debug_register_length (8);
+ x86_set_debug_register_length (8);
#else
- i386_set_debug_register_length (4);
+ x86_set_debug_register_length (4);
#endif
target->to_fetch_registers = i386_darwin_fetch_inferior_registers;
#include "i387-tdep.h"
#include "i386-tdep.h"
#include "i386-linux-tdep.h"
-#include "i386-xstate.h"
+#include "x86-xstate.h"
#include "x86-linux-nat.h"
static int
fetch_xstateregs (struct regcache *regcache, int tid)
{
- char xstateregs[I386_XSTATE_MAX_SIZE];
+ char xstateregs[X86_XSTATE_MAX_SIZE];
struct iovec iov;
if (!have_ptrace_getregset)
static int
store_xstateregs (const struct regcache *regcache, int tid, int regno)
{
- char xstateregs[I386_XSTATE_MAX_SIZE];
+ char xstateregs[X86_XSTATE_MAX_SIZE];
struct iovec iov;
if (!have_ptrace_getregset)
#include "xml-syscall.h"
#include "i387-tdep.h"
-#include "i386-xstate.h"
+#include "x86-xstate.h"
/* The syscall's XML filename for i386. */
#define XML_SYSCALL_FILENAME_I386 "syscalls/i386-linux.xml"
static struct core_regset_section i386_linux_avx_regset_sections[] =
{
{ ".reg", 68, "general-purpose" },
- { ".reg-xstate", I386_XSTATE_MAX_SIZE, "XSAVE extended state" },
+ { ".reg-xstate", X86_XSTATE_MAX_SIZE, "XSAVE extended state" },
{ NULL, 0 }
};
size_t size = bfd_section_size (abfd, xstate);
/* Check extended state size. */
- if (size < I386_XSTATE_AVX_SIZE)
- xcr0 = I386_XSTATE_SSE_MASK;
+ if (size < X86_XSTATE_AVX_SIZE)
+ xcr0 = X86_XSTATE_SSE_MASK;
else
{
char contents[8];
/* Linux/i386. */
uint64_t xcr0 = i386_linux_core_read_xcr0 (abfd);
- switch ((xcr0 & I386_XSTATE_ALL_MASK))
+ switch ((xcr0 & X86_XSTATE_ALL_MASK))
{
- case I386_XSTATE_MPX_AVX512_MASK:
- case I386_XSTATE_AVX512_MASK:
+ case X86_XSTATE_MPX_AVX512_MASK:
+ case X86_XSTATE_AVX512_MASK:
return tdesc_i386_avx512_linux;
- case I386_XSTATE_MPX_MASK:
+ case X86_XSTATE_MPX_MASK:
return tdesc_i386_mpx_linux;
- case I386_XSTATE_AVX_MASK:
+ case X86_XSTATE_AVX_MASK:
return tdesc_i386_avx_linux;
- case I386_XSTATE_SSE_MASK:
+ case X86_XSTATE_SSE_MASK:
return tdesc_i386_linux;
- case I386_XSTATE_X87_MASK:
+ case X86_XSTATE_X87_MASK:
return tdesc_i386_mmx_linux;
default:
break;
+++ /dev/null
-/* Native-dependent code for the i386.
-
- Copyright (C) 2001-2014 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include "defs.h"
-#include "i386-nat.h"
-#include "gdbcmd.h"
-#include "inferior.h"
-
-/* Support for hardware watchpoints and breakpoints using the i386
- debug registers.
-
- This provides several functions for inserting and removing
- hardware-assisted breakpoints and watchpoints, testing if one or
- more of the watchpoints triggered and at what address, checking
- whether a given region can be watched, etc.
-
- The functions below implement debug registers sharing by reference
- counts, and allow to watch regions up to 16 bytes long. */
-
-/* Whether or not to print the mirrored debug registers. */
-int debug_hw_points;
-
-/* Low-level function vector. */
-struct i386_dr_low_type i386_dr_low;
-
-/* Per-process data. We don't bind this to a per-inferior registry
- because of targets like x86 GNU/Linux that need to keep track of
- processes that aren't bound to any inferior (e.g., fork children,
- checkpoints). */
-
-struct i386_process_info
-{
- /* Linked list. */
- struct i386_process_info *next;
-
- /* The process identifier. */
- pid_t pid;
-
- /* Copy of i386 hardware debug registers. */
- struct i386_debug_reg_state state;
-};
-
-static struct i386_process_info *i386_process_list = NULL;
-
-/* Find process data for process PID. */
-
-static struct i386_process_info *
-i386_find_process_pid (pid_t pid)
-{
- struct i386_process_info *proc;
-
- for (proc = i386_process_list; proc; proc = proc->next)
- if (proc->pid == pid)
- return proc;
-
- return NULL;
-}
-
-/* Add process data for process PID. Returns newly allocated info
- object. */
-
-static struct i386_process_info *
-i386_add_process (pid_t pid)
-{
- struct i386_process_info *proc;
-
- proc = xcalloc (1, sizeof (*proc));
- proc->pid = pid;
-
- proc->next = i386_process_list;
- i386_process_list = proc;
-
- return proc;
-}
-
-/* Get data specific info for process PID, creating it if necessary.
- Never returns NULL. */
-
-static struct i386_process_info *
-i386_process_info_get (pid_t pid)
-{
- struct i386_process_info *proc;
-
- proc = i386_find_process_pid (pid);
- if (proc == NULL)
- proc = i386_add_process (pid);
-
- return proc;
-}
-
-/* Get debug registers state for process PID. */
-
-struct i386_debug_reg_state *
-i386_debug_reg_state (pid_t pid)
-{
- return &i386_process_info_get (pid)->state;
-}
-
-/* See declaration in i386-nat.h. */
-
-void
-i386_forget_process (pid_t pid)
-{
- struct i386_process_info *proc, **proc_link;
-
- proc = i386_process_list;
- proc_link = &i386_process_list;
-
- while (proc != NULL)
- {
- if (proc->pid == pid)
- {
- *proc_link = proc->next;
-
- xfree (proc);
- return;
- }
-
- proc_link = &proc->next;
- proc = *proc_link;
- }
-}
-
-/* Clear the reference counts and forget everything we knew about the
- debug registers. */
-
-void
-i386_cleanup_dregs (void)
-{
- /* Starting from scratch has the same effect. */
- i386_forget_process (ptid_get_pid (inferior_ptid));
-}
-
-/* Insert a watchpoint to watch a memory region which starts at
- address ADDR and whose length is LEN bytes. Watch memory accesses
- of the type TYPE. Return 0 on success, -1 on failure. */
-
-static int
-i386_insert_watchpoint (struct target_ops *self,
- CORE_ADDR addr, int len, int type,
- struct expression *cond)
-{
- struct i386_debug_reg_state *state
- = i386_debug_reg_state (ptid_get_pid (inferior_ptid));
-
- return i386_dr_insert_watchpoint (state, type, addr, len);
-}
-
-/* Remove a watchpoint that watched the memory region which starts at
- address ADDR, whose length is LEN bytes, and for accesses of the
- type TYPE. Return 0 on success, -1 on failure. */
-static int
-i386_remove_watchpoint (struct target_ops *self,
- CORE_ADDR addr, int len, int type,
- struct expression *cond)
-{
- struct i386_debug_reg_state *state
- = i386_debug_reg_state (ptid_get_pid (inferior_ptid));
-
- return i386_dr_remove_watchpoint (state, type, addr, len);
-}
-
-/* Return non-zero if we can watch a memory region that starts at
- address ADDR and whose length is LEN bytes. */
-
-static int
-i386_region_ok_for_watchpoint (struct target_ops *self,
- CORE_ADDR addr, int len)
-{
- struct i386_debug_reg_state *state
- = i386_debug_reg_state (ptid_get_pid (inferior_ptid));
-
- return i386_dr_region_ok_for_watchpoint (state, addr, len);
-}
-
-/* If the inferior has some break/watchpoint that triggered, set the
- address associated with that break/watchpoint and return non-zero.
- Otherwise, return zero. */
-
-static int
-i386_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr_p)
-{
- struct i386_debug_reg_state *state
- = i386_debug_reg_state (ptid_get_pid (inferior_ptid));
-
- return i386_dr_stopped_data_address (state, addr_p);
-}
-
-/* Return non-zero if the inferior has some watchpoint that triggered.
- Otherwise return zero. */
-
-static int
-i386_stopped_by_watchpoint (struct target_ops *ops)
-{
- struct i386_debug_reg_state *state
- = i386_debug_reg_state (ptid_get_pid (inferior_ptid));
-
- return i386_dr_stopped_by_watchpoint (state);
-}
-
-/* Insert a hardware-assisted breakpoint at BP_TGT->placed_address.
- Return 0 on success, EBUSY on failure. */
-
-static int
-i386_insert_hw_breakpoint (struct target_ops *self, struct gdbarch *gdbarch,
- struct bp_target_info *bp_tgt)
-{
- struct i386_debug_reg_state *state
- = i386_debug_reg_state (ptid_get_pid (inferior_ptid));
-
- return i386_dr_insert_watchpoint (state, hw_execute,
- bp_tgt->placed_address, 1) ? EBUSY : 0;
-}
-
-/* Remove a hardware-assisted breakpoint at BP_TGT->placed_address.
- Return 0 on success, -1 on failure. */
-
-static int
-i386_remove_hw_breakpoint (struct target_ops *self, struct gdbarch *gdbarch,
- struct bp_target_info *bp_tgt)
-{
- struct i386_debug_reg_state *state
- = i386_debug_reg_state (ptid_get_pid (inferior_ptid));
-
- return i386_dr_remove_watchpoint (state, hw_execute,
- bp_tgt->placed_address, 1);
-}
-
-/* Returns the number of hardware watchpoints of type TYPE that we can
- set. Value is positive if we can set CNT watchpoints, zero if
- setting watchpoints of type TYPE is not supported, and negative if
- CNT is more than the maximum number of watchpoints of type TYPE
- that we can support. TYPE is one of bp_hardware_watchpoint,
- bp_read_watchpoint, bp_write_watchpoint, or bp_hardware_breakpoint.
- CNT is the number of such watchpoints used so far (including this
- one). OTHERTYPE is non-zero if other types of watchpoints are
- currently enabled.
-
- We always return 1 here because we don't have enough information
- about possible overlap of addresses that they want to watch. As an
- extreme example, consider the case where all the watchpoints watch
- the same address and the same region length: then we can handle a
- virtually unlimited number of watchpoints, due to debug register
- sharing implemented via reference counts in i386-nat.c. */
-
-static int
-i386_can_use_hw_breakpoint (struct target_ops *self,
- int type, int cnt, int othertype)
-{
- return 1;
-}
-
-static void
-add_show_debug_regs_command (void)
-{
- /* A maintenance command to enable printing the internal DRi mirror
- variables. */
- add_setshow_boolean_cmd ("show-debug-regs", class_maintenance,
- &debug_hw_points, _("\
-Set whether to show variables that mirror the x86 debug registers."), _("\
-Show whether to show variables that mirror the x86 debug registers."), _("\
-Use \"on\" to enable, \"off\" to disable.\n\
-If enabled, the debug registers values are shown when GDB inserts\n\
-or removes a hardware breakpoint or watchpoint, and when the inferior\n\
-triggers a breakpoint or watchpoint."),
- NULL,
- NULL,
- &maintenance_set_cmdlist,
- &maintenance_show_cmdlist);
-}
-
-/* There are only two global functions left. */
-
-void
-i386_use_watchpoints (struct target_ops *t)
-{
- /* After a watchpoint trap, the PC points to the instruction after the
- one that caused the trap. Therefore we don't need to step over it.
- But we do need to reset the status register to avoid another trap. */
- t->to_have_continuable_watchpoint = 1;
-
- t->to_can_use_hw_breakpoint = i386_can_use_hw_breakpoint;
- t->to_region_ok_for_hw_watchpoint = i386_region_ok_for_watchpoint;
- t->to_stopped_by_watchpoint = i386_stopped_by_watchpoint;
- t->to_stopped_data_address = i386_stopped_data_address;
- t->to_insert_watchpoint = i386_insert_watchpoint;
- t->to_remove_watchpoint = i386_remove_watchpoint;
- t->to_insert_hw_breakpoint = i386_insert_hw_breakpoint;
- t->to_remove_hw_breakpoint = i386_remove_hw_breakpoint;
-}
-
-void
-i386_set_debug_register_length (int len)
-{
- /* This function should be called only once for each native target. */
- gdb_assert (i386_dr_low.debug_register_length == 0);
- gdb_assert (len == 4 || len == 8);
- i386_dr_low.debug_register_length = len;
- add_show_debug_regs_command ();
-}
+++ /dev/null
-/* Native-dependent code for the i386.
-
- Low level functions to implement Oeprating System specific
- code to manipulate I386 debug registers.
-
- Copyright (C) 2009-2014 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef I386_NAT_H
-#define I386_NAT_H 1
-
-#include "nat/i386-dregs.h"
-
-/* Hardware-assisted breakpoints and watchpoints. */
-
-/* Add watchpoint methods to the provided target_ops.
- Targets using i386 family debug registers for watchpoints should call
- this. */
-struct target_ops;
-extern void i386_use_watchpoints (struct target_ops *);
-
-/* Use this function to set i386_dr_low debug_register_length field
- rather than setting it directly to check that the length is only
- set once. It also enables the 'maint set/show show-debug-regs'
- command. */
-
-extern void i386_set_debug_register_length (int len);
-
-/* Use this function to reset the i386-nat.c debug register state. */
-
-extern void i386_cleanup_dregs (void);
-
-/* Return a pointer to the local mirror of the debug registers of
- process PID. */
-
-extern struct i386_debug_reg_state *i386_debug_reg_state (pid_t pid);
-
-/* Called whenever GDB is no longer debugging process PID. It deletes
- data structures that keep track of debug register state. */
-
-extern void i386_forget_process (pid_t pid);
-
-#endif /* I386_NAT_H */
#include "exceptions.h"
#include "i386-tdep.h"
#include "i387-tdep.h"
-#include "i386-xstate.h"
+#include "x86-xstate.h"
#include "record.h"
#include "record-full.h"
ymm_avx512_regnum_p = i386_ymm_avx512_regnum_p (gdbarch, regnum);
zmm_regnum_p = i386_zmm_regnum_p (gdbarch, regnum);
- avx512_p = ((tdep->xcr0 & I386_XSTATE_AVX512_MASK)
- == I386_XSTATE_AVX512_MASK);
- avx_p = ((tdep->xcr0 & I386_XSTATE_AVX512_MASK)
- == I386_XSTATE_AVX_MASK) && !avx512_p;
- sse_p = ((tdep->xcr0 & I386_XSTATE_AVX512_MASK)
- == I386_XSTATE_SSE_MASK) && !avx512_p && ! avx_p;
+ avx512_p = ((tdep->xcr0 & X86_XSTATE_AVX512_MASK)
+ == X86_XSTATE_AVX512_MASK);
+ avx_p = ((tdep->xcr0 & X86_XSTATE_AVX512_MASK)
+ == X86_XSTATE_AVX_MASK) && !avx512_p;
+ sse_p = ((tdep->xcr0 & X86_XSTATE_AVX512_MASK)
+ == X86_XSTATE_SSE_MASK) && !avx512_p && ! avx_p;
if (group == vector_reggroup)
return (mmx_regnum_p
bnd_regnum_p = i386_bnd_regnum_p (gdbarch, regnum);
if (group == all_reggroup
- && ((bnd_regnum_p && (tdep->xcr0 & I386_XSTATE_MPX_MASK))))
+ && ((bnd_regnum_p && (tdep->xcr0 & X86_XSTATE_MPX_MASK))))
return bnd_regnum_p;
bndr_regnum_p = i386_bndr_regnum_p (gdbarch, regnum);
if (group == all_reggroup
- && ((bndr_regnum_p && (tdep->xcr0 & I386_XSTATE_MPX_MASK))))
+ && ((bndr_regnum_p && (tdep->xcr0 & X86_XSTATE_MPX_MASK))))
return 0;
mpx_ctrl_regnum_p = i386_mpx_ctrl_regnum_p (gdbarch, regnum);
if (group == all_reggroup
- && ((mpx_ctrl_regnum_p && (tdep->xcr0 & I386_XSTATE_MPX_MASK))))
+ && ((mpx_ctrl_regnum_p && (tdep->xcr0 & X86_XSTATE_MPX_MASK))))
return mpx_ctrl_regnum_p;
if (group == general_reggroup)
if (!feature_avx)
return 0;
- tdep->xcr0 = I386_XSTATE_MPX_AVX512_MASK;
+ tdep->xcr0 = X86_XSTATE_MPX_AVX512_MASK;
/* It may have been set by OSABI initialization function. */
if (tdep->k0_regnum < 0)
return 0;
if (!feature_avx512)
- tdep->xcr0 = I386_XSTATE_AVX_MASK;
+ tdep->xcr0 = X86_XSTATE_AVX_MASK;
/* It may have been set by OSABI initialization function. */
if (tdep->num_ymm_regs == 0)
tdep->ymmh_register_names[i]);
}
else if (feature_sse)
- tdep->xcr0 = I386_XSTATE_SSE_MASK;
+ tdep->xcr0 = X86_XSTATE_SSE_MASK;
else
{
- tdep->xcr0 = I386_XSTATE_X87_MASK;
+ tdep->xcr0 = X86_XSTATE_X87_MASK;
tdep->num_xmm_regs = 0;
}
if (feature_mpx)
{
- tdep->xcr0 |= I386_XSTATE_MPX_MASK;
+ tdep->xcr0 |= X86_XSTATE_MPX_MASK;
if (tdep->bnd0r_regnum < 0)
{
#include "defs.h"
#include "windows-nat.h"
-#include "i386-nat.h"
+#include "x86-nat.h"
#include "i386-tdep.h"
#include <windows.h>
{
windows_set_context_register_offsets (mappings);
windows_set_segment_register_p (i386_windows_segment_register_p);
- i386_set_debug_register_length (4);
+ x86_set_debug_register_length (4);
}
#include "fbsd-nat.h"
#include "i386-tdep.h"
-#include "i386-nat.h"
+#include "x86-nat.h"
#include "i386bsd-nat.h"
/* Resume execution of the inferior process. If STEP is nonzero,
#ifdef HAVE_PT_GETDBREGS
- i386_use_watchpoints (t);
+ x86_use_watchpoints (t);
- i386_dr_low.set_control = i386bsd_dr_set_control;
- i386_dr_low.set_addr = i386bsd_dr_set_addr;
- i386_dr_low.get_addr = i386bsd_dr_get_addr;
- i386_dr_low.get_status = i386bsd_dr_get_status;
- i386_dr_low.get_control = i386bsd_dr_get_control;
- i386_set_debug_register_length (4);
+ x86_dr_low.set_control = i386bsd_dr_set_control;
+ x86_dr_low.set_addr = i386bsd_dr_set_addr;
+ x86_dr_low.get_addr = i386bsd_dr_get_addr;
+ x86_dr_low.get_status = i386bsd_dr_get_status;
+ x86_dr_low.get_control = i386bsd_dr_get_control;
+ x86_set_debug_register_length (4);
#endif /* HAVE_PT_GETDBREGS */
#include "i386-tdep.h"
#include "i387-tdep.h"
-#include "i386-xstate.h"
+#include "x86-xstate.h"
/* Print the floating point number specified by RAW. */
clear_bv = (~(*xstate_bv_p)) & tdep->xcr0;
}
else
- clear_bv = I386_XSTATE_ALL_MASK;
+ clear_bv = X86_XSTATE_ALL_MASK;
/* With the delayed xsave mechanism, in between the program
starting, and the program accessing the vector registers for the
break;
case avx512_zmm_h:
- if ((clear_bv & (I386_XSTATE_ZMM_H | I386_XSTATE_ZMM)))
+ if ((clear_bv & (X86_XSTATE_ZMM_H | X86_XSTATE_ZMM)))
regcache_raw_supply (regcache, regnum, zero);
else
regcache_raw_supply (regcache, regnum,
return;
case avx512_k:
- if ((clear_bv & I386_XSTATE_K))
+ if ((clear_bv & X86_XSTATE_K))
regcache_raw_supply (regcache, regnum, zero);
else
regcache_raw_supply (regcache, regnum,
return;
case avx512_ymmh_avx512:
- if ((clear_bv & I386_XSTATE_ZMM))
+ if ((clear_bv & X86_XSTATE_ZMM))
regcache_raw_supply (regcache, regnum, zero);
else
regcache_raw_supply (regcache, regnum,
return;
case avx512_xmm_avx512:
- if ((clear_bv & I386_XSTATE_ZMM))
+ if ((clear_bv & X86_XSTATE_ZMM))
regcache_raw_supply (regcache, regnum, zero);
else
regcache_raw_supply (regcache, regnum,
return;
case avxh:
- if ((clear_bv & I386_XSTATE_AVX))
+ if ((clear_bv & X86_XSTATE_AVX))
regcache_raw_supply (regcache, regnum, zero);
else
regcache_raw_supply (regcache, regnum,
return;
case mpx:
- if ((clear_bv & I386_XSTATE_BNDREGS))
+ if ((clear_bv & X86_XSTATE_BNDREGS))
regcache_raw_supply (regcache, regnum, zero);
else
regcache_raw_supply (regcache, regnum,
return;
case sse:
- if ((clear_bv & I386_XSTATE_SSE))
+ if ((clear_bv & X86_XSTATE_SSE))
regcache_raw_supply (regcache, regnum, zero);
else
regcache_raw_supply (regcache, regnum,
return;
case x87:
- if ((clear_bv & I386_XSTATE_X87))
+ if ((clear_bv & X86_XSTATE_X87))
regcache_raw_supply (regcache, regnum, zero);
else
regcache_raw_supply (regcache, regnum,
case all:
/* Handle the upper ZMM registers. */
- if ((tdep->xcr0 & (I386_XSTATE_ZMM_H | I386_XSTATE_ZMM)))
+ if ((tdep->xcr0 & (X86_XSTATE_ZMM_H | X86_XSTATE_ZMM)))
{
- if ((clear_bv & (I386_XSTATE_ZMM_H | I386_XSTATE_ZMM)))
+ if ((clear_bv & (X86_XSTATE_ZMM_H | X86_XSTATE_ZMM)))
{
for (i = I387_ZMM0H_REGNUM (tdep);
i < I387_ZMMENDH_REGNUM (tdep);
}
/* Handle AVX512 OpMask registers. */
- if ((tdep->xcr0 & I386_XSTATE_K))
+ if ((tdep->xcr0 & X86_XSTATE_K))
{
- if ((clear_bv & I386_XSTATE_K))
+ if ((clear_bv & X86_XSTATE_K))
{
for (i = I387_K0_REGNUM (tdep);
i < I387_KEND_REGNUM (tdep);
}
/* Handle the YMM_AVX512 registers. */
- if ((tdep->xcr0 & I386_XSTATE_ZMM))
+ if ((tdep->xcr0 & X86_XSTATE_ZMM))
{
- if ((clear_bv & I386_XSTATE_ZMM))
+ if ((clear_bv & X86_XSTATE_ZMM))
{
for (i = I387_YMM16H_REGNUM (tdep);
i < I387_YMMH_AVX512_END_REGNUM (tdep);
}
}
/* Handle the upper YMM registers. */
- if ((tdep->xcr0 & I386_XSTATE_AVX))
+ if ((tdep->xcr0 & X86_XSTATE_AVX))
{
- if ((clear_bv & I386_XSTATE_AVX))
+ if ((clear_bv & X86_XSTATE_AVX))
{
for (i = I387_YMM0H_REGNUM (tdep);
i < I387_YMMENDH_REGNUM (tdep);
}
/* Handle the MPX registers. */
- if ((tdep->xcr0 & I386_XSTATE_BNDREGS))
+ if ((tdep->xcr0 & X86_XSTATE_BNDREGS))
{
- if (clear_bv & I386_XSTATE_BNDREGS)
+ if (clear_bv & X86_XSTATE_BNDREGS)
{
for (i = I387_BND0R_REGNUM (tdep);
i < I387_BNDCFGU_REGNUM (tdep); i++)
}
/* Handle the MPX registers. */
- if ((tdep->xcr0 & I386_XSTATE_BNDCFG))
+ if ((tdep->xcr0 & X86_XSTATE_BNDCFG))
{
- if (clear_bv & I386_XSTATE_BNDCFG)
+ if (clear_bv & X86_XSTATE_BNDCFG)
{
for (i = I387_BNDCFGU_REGNUM (tdep);
i < I387_MPXEND_REGNUM (tdep); i++)
}
/* Handle the XMM registers. */
- if ((tdep->xcr0 & I386_XSTATE_SSE))
+ if ((tdep->xcr0 & X86_XSTATE_SSE))
{
- if ((clear_bv & I386_XSTATE_SSE))
+ if ((clear_bv & X86_XSTATE_SSE))
{
for (i = I387_XMM0_REGNUM (tdep);
i < I387_MXCSR_REGNUM (tdep);
}
/* Handle the x87 registers. */
- if ((tdep->xcr0 & I386_XSTATE_X87))
+ if ((tdep->xcr0 & X86_XSTATE_X87))
{
- if ((clear_bv & I386_XSTATE_X87))
+ if ((clear_bv & X86_XSTATE_X87))
{
for (i = I387_ST0_REGNUM (tdep);
i < I387_FCTRL_REGNUM (tdep);
if (gcore)
{
/* Clear XSAVE extended state. */
- memset (regs, 0, I386_XSTATE_SIZE (tdep->xcr0));
+ memset (regs, 0, X86_XSTATE_SIZE (tdep->xcr0));
/* Update XCR0 and `xstate_bv' with XCR0 for gcore. */
if (tdep->xsave_xcr0_offset != -1)
/* Clear register set if its bit in xstat_bv is zero. */
if (clear_bv)
{
- if ((clear_bv & I386_XSTATE_BNDREGS))
+ if ((clear_bv & X86_XSTATE_BNDREGS))
for (i = I387_BND0R_REGNUM (tdep);
i < I387_BNDCFGU_REGNUM (tdep); i++)
memset (XSAVE_MPX_ADDR (tdep, regs, i), 0, 16);
- if ((clear_bv & I386_XSTATE_BNDCFG))
+ if ((clear_bv & X86_XSTATE_BNDCFG))
for (i = I387_BNDCFGU_REGNUM (tdep);
i < I387_MPXEND_REGNUM (tdep); i++)
memset (XSAVE_MPX_ADDR (tdep, regs, i), 0, 8);
- if ((clear_bv & (I386_XSTATE_ZMM_H | I386_XSTATE_ZMM)))
+ if ((clear_bv & (X86_XSTATE_ZMM_H | X86_XSTATE_ZMM)))
for (i = I387_ZMM0H_REGNUM (tdep);
i < I387_ZMMENDH_REGNUM (tdep); i++)
memset (XSAVE_AVX512_ZMM_H_ADDR (tdep, regs, i), 0, 32);
- if ((clear_bv & I386_XSTATE_K))
+ if ((clear_bv & X86_XSTATE_K))
for (i = I387_K0_REGNUM (tdep);
i < I387_KEND_REGNUM (tdep); i++)
memset (XSAVE_AVX512_K_ADDR (tdep, regs, i), 0, 8);
- if ((clear_bv & I386_XSTATE_ZMM))
+ if ((clear_bv & X86_XSTATE_ZMM))
{
for (i = I387_YMM16H_REGNUM (tdep);
i < I387_YMMH_AVX512_END_REGNUM (tdep); i++)
memset (XSAVE_XMM_AVX512_ADDR (tdep, regs, i), 0, 16);
}
- if ((clear_bv & I386_XSTATE_AVX))
+ if ((clear_bv & X86_XSTATE_AVX))
for (i = I387_YMM0H_REGNUM (tdep);
i < I387_YMMENDH_REGNUM (tdep); i++)
memset (XSAVE_AVXH_ADDR (tdep, regs, i), 0, 16);
- if ((clear_bv & I386_XSTATE_SSE))
+ if ((clear_bv & X86_XSTATE_SSE))
for (i = I387_XMM0_REGNUM (tdep);
i < I387_MXCSR_REGNUM (tdep); i++)
memset (FXSAVE_ADDR (tdep, regs, i), 0, 16);
- if ((clear_bv & I386_XSTATE_X87))
+ if ((clear_bv & X86_XSTATE_X87))
for (i = I387_ST0_REGNUM (tdep);
i < I387_FCTRL_REGNUM (tdep); i++)
memset (FXSAVE_ADDR (tdep, regs, i), 0, 10);
if (regclass == all)
{
/* Check if any ZMMH registers are changed. */
- if ((tdep->xcr0 & (I386_XSTATE_ZMM_H | I386_XSTATE_ZMM)))
+ if ((tdep->xcr0 & (X86_XSTATE_ZMM_H | X86_XSTATE_ZMM)))
for (i = I387_ZMM0H_REGNUM (tdep);
i < I387_ZMMENDH_REGNUM (tdep); i++)
{
p = XSAVE_AVX512_ZMM_H_ADDR (tdep, regs, i);
if (memcmp (raw, p, 32) != 0)
{
- xstate_bv |= (I386_XSTATE_ZMM_H | I386_XSTATE_ZMM);
+ xstate_bv |= (X86_XSTATE_ZMM_H | X86_XSTATE_ZMM);
memcpy (p, raw, 32);
}
}
/* Check if any K registers are changed. */
- if ((tdep->xcr0 & I386_XSTATE_K))
+ if ((tdep->xcr0 & X86_XSTATE_K))
for (i = I387_K0_REGNUM (tdep);
i < I387_KEND_REGNUM (tdep); i++)
{
p = XSAVE_AVX512_K_ADDR (tdep, regs, i);
if (memcmp (raw, p, 8) != 0)
{
- xstate_bv |= I386_XSTATE_K;
+ xstate_bv |= X86_XSTATE_K;
memcpy (p, raw, 8);
}
}
/* Check if any XMM or upper YMM registers are changed. */
- if ((tdep->xcr0 & I386_XSTATE_ZMM))
+ if ((tdep->xcr0 & X86_XSTATE_ZMM))
{
for (i = I387_YMM16H_REGNUM (tdep);
i < I387_YMMH_AVX512_END_REGNUM (tdep); i++)
p = XSAVE_YMM_AVX512_ADDR (tdep, regs, i);
if (memcmp (raw, p, 16) != 0)
{
- xstate_bv |= I386_XSTATE_ZMM;
+ xstate_bv |= X86_XSTATE_ZMM;
memcpy (p, raw, 16);
}
}
p = XSAVE_XMM_AVX512_ADDR (tdep, regs, i);
if (memcmp (raw, p, 16) != 0)
{
- xstate_bv |= I386_XSTATE_ZMM;
+ xstate_bv |= X86_XSTATE_ZMM;
memcpy (p, raw, 16);
}
}
}
/* Check if any upper YMM registers are changed. */
- if ((tdep->xcr0 & I386_XSTATE_AVX))
+ if ((tdep->xcr0 & X86_XSTATE_AVX))
for (i = I387_YMM0H_REGNUM (tdep);
i < I387_YMMENDH_REGNUM (tdep); i++)
{
p = XSAVE_AVXH_ADDR (tdep, regs, i);
if (memcmp (raw, p, 16))
{
- xstate_bv |= I386_XSTATE_AVX;
+ xstate_bv |= X86_XSTATE_AVX;
memcpy (p, raw, 16);
}
}
/* Check if any upper MPX registers are changed. */
- if ((tdep->xcr0 & I386_XSTATE_BNDREGS))
+ if ((tdep->xcr0 & X86_XSTATE_BNDREGS))
for (i = I387_BND0R_REGNUM (tdep);
i < I387_BNDCFGU_REGNUM (tdep); i++)
{
p = XSAVE_MPX_ADDR (tdep, regs, i);
if (memcmp (raw, p, 16))
{
- xstate_bv |= I386_XSTATE_BNDREGS;
+ xstate_bv |= X86_XSTATE_BNDREGS;
memcpy (p, raw, 16);
}
}
/* Check if any upper MPX registers are changed. */
- if ((tdep->xcr0 & I386_XSTATE_BNDCFG))
+ if ((tdep->xcr0 & X86_XSTATE_BNDCFG))
for (i = I387_BNDCFGU_REGNUM (tdep);
i < I387_MPXEND_REGNUM (tdep); i++)
{
p = XSAVE_MPX_ADDR (tdep, regs, i);
if (memcmp (raw, p, 8))
{
- xstate_bv |= I386_XSTATE_BNDCFG;
+ xstate_bv |= X86_XSTATE_BNDCFG;
memcpy (p, raw, 8);
}
}
/* Check if any SSE registers are changed. */
- if ((tdep->xcr0 & I386_XSTATE_SSE))
+ if ((tdep->xcr0 & X86_XSTATE_SSE))
for (i = I387_XMM0_REGNUM (tdep);
i < I387_MXCSR_REGNUM (tdep); i++)
{
p = FXSAVE_ADDR (tdep, regs, i);
if (memcmp (raw, p, 16))
{
- xstate_bv |= I386_XSTATE_SSE;
+ xstate_bv |= X86_XSTATE_SSE;
memcpy (p, raw, 16);
}
}
/* Check if any X87 registers are changed. */
- if ((tdep->xcr0 & I386_XSTATE_X87))
+ if ((tdep->xcr0 & X86_XSTATE_X87))
for (i = I387_ST0_REGNUM (tdep);
i < I387_FCTRL_REGNUM (tdep); i++)
{
p = FXSAVE_ADDR (tdep, regs, i);
if (memcmp (raw, p, 10))
{
- xstate_bv |= I386_XSTATE_X87;
+ xstate_bv |= X86_XSTATE_X87;
memcpy (p, raw, 10);
}
}
p = XSAVE_AVX512_ZMM_H_ADDR (tdep, regs, regnum);
if (memcmp (raw, p, 32) != 0)
{
- xstate_bv |= (I386_XSTATE_ZMM_H | I386_XSTATE_ZMM);
+ xstate_bv |= (X86_XSTATE_ZMM_H | X86_XSTATE_ZMM);
memcpy (p, raw, 32);
}
break;
p = XSAVE_AVX512_K_ADDR (tdep, regs, regnum);
if (memcmp (raw, p, 8) != 0)
{
- xstate_bv |= I386_XSTATE_K;
+ xstate_bv |= X86_XSTATE_K;
memcpy (p, raw, 8);
}
break;
p = XSAVE_YMM_AVX512_ADDR (tdep, regs, regnum);
if (memcmp (raw, p, 16) != 0)
{
- xstate_bv |= I386_XSTATE_ZMM;
+ xstate_bv |= X86_XSTATE_ZMM;
memcpy (p, raw, 16);
}
break;
p = XSAVE_XMM_AVX512_ADDR (tdep, regs, regnum);
if (memcmp (raw, p, 16) != 0)
{
- xstate_bv |= I386_XSTATE_ZMM;
+ xstate_bv |= X86_XSTATE_ZMM;
memcpy (p, raw, 16);
}
break;
p = XSAVE_AVXH_ADDR (tdep, regs, regnum);
if (memcmp (raw, p, 16))
{
- xstate_bv |= I386_XSTATE_AVX;
+ xstate_bv |= X86_XSTATE_AVX;
memcpy (p, raw, 16);
}
break;
p = XSAVE_MPX_ADDR (tdep, regs, regnum);
if (memcmp (raw, p, 16))
{
- xstate_bv |= I386_XSTATE_BNDREGS;
+ xstate_bv |= X86_XSTATE_BNDREGS;
memcpy (p, raw, 16);
}
}
else
{
p = XSAVE_MPX_ADDR (tdep, regs, regnum);
- xstate_bv |= I386_XSTATE_BNDCFG;
+ xstate_bv |= X86_XSTATE_BNDCFG;
memcpy (p, raw, 8);
}
break;
p = FXSAVE_ADDR (tdep, regs, regnum);
if (memcmp (raw, p, 16))
{
- xstate_bv |= I386_XSTATE_SSE;
+ xstate_bv |= X86_XSTATE_SSE;
memcpy (p, raw, 16);
}
break;
p = FXSAVE_ADDR (tdep, regs, regnum);
if (memcmp (raw, p, 10))
{
- xstate_bv |= I386_XSTATE_X87;
+ xstate_bv |= X86_XSTATE_X87;
memcpy (p, raw, 10);
}
break;
+++ /dev/null
-/* C API for x86 cpuid insn.
- Copyright (C) 2007-2014 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This file is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 3, or (at your option) any
- later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef I386_CPUID_COMMON_H
-#define I386_CPUID_COMMON_H
-
-/* Always include the header for the cpu bit defines. */
-#include "i386-gcc-cpuid.h"
-
-#if defined(__i386__) || defined(__x86_64__)
-
-/* Return cpuid data for requested cpuid level, as found in returned
- eax, ebx, ecx and edx registers. The function checks if cpuid is
- supported and returns 1 for valid cpuid information or 0 for
- unsupported cpuid level. Pointers may be non-null. */
-
-static __inline int
-i386_cpuid (unsigned int __level,
- unsigned int *__eax, unsigned int *__ebx,
- unsigned int *__ecx, unsigned int *__edx)
-{
- unsigned int __scratch;
-
- if (!__eax)
- __eax = &__scratch;
- if (!__ebx)
- __ebx = &__scratch;
- if (!__ecx)
- __ecx = &__scratch;
- if (!__edx)
- __edx = &__scratch;
-
- return __get_cpuid (__level, __eax, __ebx, __ecx, __edx);
-}
-
-#else
-
-static __inline int
-i386_cpuid (unsigned int __level,
- unsigned int *__eax, unsigned int *__ebx,
- unsigned int *__ecx, unsigned int *__edx)
-{
- return 0;
-}
-
-#endif /* i386 && x86_64 */
-
-#endif /* I386_CPUID_COMMON_H */
+++ /dev/null
-/* Debug register code for the i386.
-
- Copyright (C) 2001-2014 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifdef GDBSERVER
-#include "server.h"
-#else
-#include "defs.h"
-#include "inferior.h"
-#endif
-#include "i386-dregs.h"
-
-/* Support for hardware watchpoints and breakpoints using the i386
- debug registers.
-
- This provides several functions for inserting and removing
- hardware-assisted breakpoints and watchpoints, testing if one or
- more of the watchpoints triggered and at what address, checking
- whether a given region can be watched, etc.
-
- The functions below implement debug registers sharing by reference
- counts, and allow to watch regions up to 16 bytes long. */
-
-/* Accessor macros for low-level function vector. */
-
-/* Can we update the inferior's debug registers? */
-#define i386_dr_low_can_set_addr() (i386_dr_low.set_addr != NULL)
-
-/* Update the inferior's debug register REGNUM from STATE. */
-#define i386_dr_low_set_addr(new_state, i) \
- (i386_dr_low.set_addr ((i), (new_state)->dr_mirror[(i)]))
-
-/* Return the inferior's debug register REGNUM. */
-#define i386_dr_low_get_addr(i) (i386_dr_low.get_addr ((i)))
-
-/* Can we update the inferior's DR7 control register? */
-#define i386_dr_low_can_set_control() (i386_dr_low.set_control != NULL)
-
-/* Update the inferior's DR7 debug control register from STATE. */
-#define i386_dr_low_set_control(new_state) \
- (i386_dr_low.set_control ((new_state)->dr_control_mirror))
-
-/* Return the value of the inferior's DR7 debug control register. */
-#define i386_dr_low_get_control() (i386_dr_low.get_control ())
-
-/* Return the value of the inferior's DR6 debug status register. */
-#define i386_dr_low_get_status() (i386_dr_low.get_status ())
-
-/* Return the debug register size, in bytes. */
-#define i386_get_debug_register_length() \
- (i386_dr_low.debug_register_length)
-
-/* Support for 8-byte wide hw watchpoints. */
-#define TARGET_HAS_DR_LEN_8 (i386_get_debug_register_length () == 8)
-
-/* DR7 Debug Control register fields. */
-
-/* How many bits to skip in DR7 to get to R/W and LEN fields. */
-#define DR_CONTROL_SHIFT 16
-/* How many bits in DR7 per R/W and LEN field for each watchpoint. */
-#define DR_CONTROL_SIZE 4
-
-/* Watchpoint/breakpoint read/write fields in DR7. */
-#define DR_RW_EXECUTE (0x0) /* Break on instruction execution. */
-#define DR_RW_WRITE (0x1) /* Break on data writes. */
-#define DR_RW_READ (0x3) /* Break on data reads or writes. */
-
-/* This is here for completeness. No platform supports this
- functionality yet (as of March 2001). Note that the DE flag in the
- CR4 register needs to be set to support this. */
-#ifndef DR_RW_IORW
-#define DR_RW_IORW (0x2) /* Break on I/O reads or writes. */
-#endif
-
-/* Watchpoint/breakpoint length fields in DR7. The 2-bit left shift
- is so we could OR this with the read/write field defined above. */
-#define DR_LEN_1 (0x0 << 2) /* 1-byte region watch or breakpoint. */
-#define DR_LEN_2 (0x1 << 2) /* 2-byte region watch. */
-#define DR_LEN_4 (0x3 << 2) /* 4-byte region watch. */
-#define DR_LEN_8 (0x2 << 2) /* 8-byte region watch (AMD64). */
-
-/* Local and Global Enable flags in DR7.
-
- When the Local Enable flag is set, the breakpoint/watchpoint is
- enabled only for the current task; the processor automatically
- clears this flag on every task switch. When the Global Enable flag
- is set, the breakpoint/watchpoint is enabled for all tasks; the
- processor never clears this flag.
-
- Currently, all watchpoint are locally enabled. If you need to
- enable them globally, read the comment which pertains to this in
- i386_insert_aligned_watchpoint below. */
-#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit. */
-#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit. */
-#define DR_ENABLE_SIZE 2 /* Two enable bits per debug register. */
-
-/* Local and global exact breakpoint enable flags (a.k.a. slowdown
- flags). These are only required on i386, to allow detection of the
- exact instruction which caused a watchpoint to break; i486 and
- later processors do that automatically. We set these flags for
- backwards compatibility. */
-#define DR_LOCAL_SLOWDOWN (0x100)
-#define DR_GLOBAL_SLOWDOWN (0x200)
-
-/* Fields reserved by Intel. This includes the GD (General Detect
- Enable) flag, which causes a debug exception to be generated when a
- MOV instruction accesses one of the debug registers.
-
- FIXME: My Intel manual says we should use 0xF800, not 0xFC00. */
-#define DR_CONTROL_RESERVED (0xFC00)
-
-/* Auxiliary helper macros. */
-
-/* A value that masks all fields in DR7 that are reserved by Intel. */
-#define I386_DR_CONTROL_MASK (~DR_CONTROL_RESERVED)
-
-/* The I'th debug register is vacant if its Local and Global Enable
- bits are reset in the Debug Control register. */
-#define I386_DR_VACANT(state, i) \
- (((state)->dr_control_mirror & (3 << (DR_ENABLE_SIZE * (i)))) == 0)
-
-/* Locally enable the break/watchpoint in the I'th debug register. */
-#define I386_DR_LOCAL_ENABLE(state, i) \
- do { \
- (state)->dr_control_mirror |= \
- (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \
- } while (0)
-
-/* Globally enable the break/watchpoint in the I'th debug register. */
-#define I386_DR_GLOBAL_ENABLE(state, i) \
- do { \
- (state)->dr_control_mirror |= \
- (1 << (DR_GLOBAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \
- } while (0)
-
-/* Disable the break/watchpoint in the I'th debug register. */
-#define I386_DR_DISABLE(state, i) \
- do { \
- (state)->dr_control_mirror &= \
- ~(3 << (DR_ENABLE_SIZE * (i))); \
- } while (0)
-
-/* Set in DR7 the RW and LEN fields for the I'th debug register. */
-#define I386_DR_SET_RW_LEN(state, i, rwlen) \
- do { \
- (state)->dr_control_mirror &= \
- ~(0x0f << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \
- (state)->dr_control_mirror |= \
- ((rwlen) << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \
- } while (0)
-
-/* Get from DR7 the RW and LEN fields for the I'th debug register. */
-#define I386_DR_GET_RW_LEN(dr7, i) \
- (((dr7) \
- >> (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))) & 0x0f)
-
-/* Did the watchpoint whose address is in the I'th register break? */
-#define I386_DR_WATCH_HIT(dr6, i) ((dr6) & (1 << (i)))
-
-/* Types of operations supported by i386_handle_nonaligned_watchpoint. */
-typedef enum { WP_INSERT, WP_REMOVE, WP_COUNT } i386_wp_op_t;
-
-#ifndef GDBSERVER
-/* Whether or not to print the mirrored debug registers. */
-extern int debug_hw_points;
-#endif
-
-/* Print the values of the mirrored debug registers. */
-
-static void
-i386_show_dr (struct i386_debug_reg_state *state,
- const char *func, CORE_ADDR addr,
- int len, enum target_hw_bp_type type)
-{
- int i;
-
- debug_printf ("%s", func);
- if (addr || len)
- debug_printf (" (addr=%s, len=%d, type=%s)",
- phex (addr, 8), len,
- type == hw_write ? "data-write"
- : (type == hw_read ? "data-read"
- : (type == hw_access ? "data-read/write"
- : (type == hw_execute ? "instruction-execute"
- /* FIXME: if/when I/O read/write
- watchpoints are supported, add them
- here. */
- : "??unknown??"))));
- debug_printf (":\n");
- debug_printf ("\tCONTROL (DR7): %s STATUS (DR6): %s\n",
- phex (state->dr_control_mirror, 8),
- phex (state->dr_status_mirror, 8));
- ALL_DEBUG_REGISTERS (i)
- {
- debug_printf ("\
-\tDR%d: addr=0x%s, ref.count=%d DR%d: addr=0x%s, ref.count=%d\n",
- i, phex (state->dr_mirror[i],
- i386_get_debug_register_length ()),
- state->dr_ref_count[i],
- i + 1, phex (state->dr_mirror[i + 1],
- i386_get_debug_register_length ()),
- state->dr_ref_count[i + 1]);
- i++;
- }
-}
-
-/* Return the value of a 4-bit field for DR7 suitable for watching a
- region of LEN bytes for accesses of type TYPE. LEN is assumed to
- have the value of 1, 2, or 4. */
-
-static unsigned
-i386_length_and_rw_bits (int len, enum target_hw_bp_type type)
-{
- unsigned rw;
-
- switch (type)
- {
- case hw_execute:
- rw = DR_RW_EXECUTE;
- break;
- case hw_write:
- rw = DR_RW_WRITE;
- break;
- case hw_read:
- internal_error (__FILE__, __LINE__,
- _("The i386 doesn't support "
- "data-read watchpoints.\n"));
- case hw_access:
- rw = DR_RW_READ;
- break;
-#if 0
- /* Not yet supported. */
- case hw_io_access:
- rw = DR_RW_IORW;
- break;
-#endif
- default:
- internal_error (__FILE__, __LINE__, _("\
-Invalid hardware breakpoint type %d in i386_length_and_rw_bits.\n"),
- (int) type);
- }
-
- switch (len)
- {
- case 1:
- return (DR_LEN_1 | rw);
- case 2:
- return (DR_LEN_2 | rw);
- case 4:
- return (DR_LEN_4 | rw);
- case 8:
- if (TARGET_HAS_DR_LEN_8)
- return (DR_LEN_8 | rw);
- /* ELSE FALL THROUGH */
- default:
- internal_error (__FILE__, __LINE__, _("\
-Invalid hardware breakpoint length %d in i386_length_and_rw_bits.\n"), len);
- }
-}
-
-/* Insert a watchpoint at address ADDR, which is assumed to be aligned
- according to the length of the region to watch. LEN_RW_BITS is the
- value of the bits from DR7 which describes the length and access
- type of the region to be watched by this watchpoint. Return 0 on
- success, -1 on failure. */
-
-static int
-i386_insert_aligned_watchpoint (struct i386_debug_reg_state *state,
- CORE_ADDR addr, unsigned len_rw_bits)
-{
- int i;
-
- if (!i386_dr_low_can_set_addr () || !i386_dr_low_can_set_control ())
- return -1;
-
- /* First, look for an occupied debug register with the same address
- and the same RW and LEN definitions. If we find one, we can
- reuse it for this watchpoint as well (and save a register). */
- ALL_DEBUG_REGISTERS (i)
- {
- if (!I386_DR_VACANT (state, i)
- && state->dr_mirror[i] == addr
- && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits)
- {
- state->dr_ref_count[i]++;
- return 0;
- }
- }
-
- /* Next, look for a vacant debug register. */
- ALL_DEBUG_REGISTERS (i)
- {
- if (I386_DR_VACANT (state, i))
- break;
- }
-
- /* No more debug registers! */
- if (i >= DR_NADDR)
- return -1;
-
- /* Now set up the register I to watch our region. */
-
- /* Record the info in our local mirrored array. */
- state->dr_mirror[i] = addr;
- state->dr_ref_count[i] = 1;
- I386_DR_SET_RW_LEN (state, i, len_rw_bits);
- /* Note: we only enable the watchpoint locally, i.e. in the current
- task. Currently, no i386 target allows or supports global
- watchpoints; however, if any target would want that in the
- future, GDB should probably provide a command to control whether
- to enable watchpoints globally or locally, and the code below
- should use global or local enable and slow-down flags as
- appropriate. */
- I386_DR_LOCAL_ENABLE (state, i);
- state->dr_control_mirror |= DR_LOCAL_SLOWDOWN;
- state->dr_control_mirror &= I386_DR_CONTROL_MASK;
-
- return 0;
-}
-
-/* Remove a watchpoint at address ADDR, which is assumed to be aligned
- according to the length of the region to watch. LEN_RW_BITS is the
- value of the bits from DR7 which describes the length and access
- type of the region watched by this watchpoint. Return 0 on
- success, -1 on failure. */
-
-static int
-i386_remove_aligned_watchpoint (struct i386_debug_reg_state *state,
- CORE_ADDR addr, unsigned len_rw_bits)
-{
- int i, retval = -1;
- int all_vacant = 1;
-
- ALL_DEBUG_REGISTERS (i)
- {
- if (!I386_DR_VACANT (state, i)
- && state->dr_mirror[i] == addr
- && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits)
- {
- if (--state->dr_ref_count[i] == 0) /* No longer in use? */
- {
- /* Reset our mirror. */
- state->dr_mirror[i] = 0;
- I386_DR_DISABLE (state, i);
- /* Even though not strictly necessary, clear out all
- bits in DR_CONTROL related to this debug register.
- Debug output is clearer when we don't have stale bits
- in place. This also allows the assertion below. */
- I386_DR_SET_RW_LEN (state, i, 0);
- }
- retval = 0;
- }
-
- if (!I386_DR_VACANT (state, i))
- all_vacant = 0;
- }
-
- if (all_vacant)
- {
- /* Even though not strictly necessary, clear out all of
- DR_CONTROL, so that when we have no debug registers in use,
- we end up with DR_CONTROL == 0. The Linux support relies on
- this for an optimization. Plus, it makes for clearer debug
- output. */
- state->dr_control_mirror &= ~DR_LOCAL_SLOWDOWN;
-
- gdb_assert (state->dr_control_mirror == 0);
- }
- return retval;
-}
-
-/* Insert or remove a (possibly non-aligned) watchpoint, or count the
- number of debug registers required to watch a region at address
- ADDR whose length is LEN for accesses of type TYPE. Return 0 on
- successful insertion or removal, a positive number when queried
- about the number of registers, or -1 on failure. If WHAT is not a
- valid value, bombs through internal_error. */
-
-static int
-i386_handle_nonaligned_watchpoint (struct i386_debug_reg_state *state,
- i386_wp_op_t what, CORE_ADDR addr, int len,
- enum target_hw_bp_type type)
-{
- int retval = 0;
- int max_wp_len = TARGET_HAS_DR_LEN_8 ? 8 : 4;
-
- static const int size_try_array[8][8] =
- {
- {1, 1, 1, 1, 1, 1, 1, 1}, /* Trying size one. */
- {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size two. */
- {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size three. */
- {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size four. */
- {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size five. */
- {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size six. */
- {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size seven. */
- {8, 1, 2, 1, 4, 1, 2, 1}, /* Trying size eight. */
- };
-
- while (len > 0)
- {
- int align = addr % max_wp_len;
- /* Four (eight on AMD64) is the maximum length a debug register
- can watch. */
- int try = (len > max_wp_len ? (max_wp_len - 1) : len - 1);
- int size = size_try_array[try][align];
-
- if (what == WP_COUNT)
- {
- /* size_try_array[] is defined such that each iteration
- through the loop is guaranteed to produce an address and a
- size that can be watched with a single debug register.
- Thus, for counting the registers required to watch a
- region, we simply need to increment the count on each
- iteration. */
- retval++;
- }
- else
- {
- unsigned len_rw = i386_length_and_rw_bits (size, type);
-
- if (what == WP_INSERT)
- retval = i386_insert_aligned_watchpoint (state, addr, len_rw);
- else if (what == WP_REMOVE)
- retval = i386_remove_aligned_watchpoint (state, addr, len_rw);
- else
- internal_error (__FILE__, __LINE__, _("\
-Invalid value %d of operation in i386_handle_nonaligned_watchpoint.\n"),
- (int) what);
- if (retval)
- break;
- }
-
- addr += size;
- len -= size;
- }
-
- return retval;
-}
-
-/* Update the inferior debug registers state, in STATE, with the
- new debug registers state, in NEW_STATE. */
-
-static void
-i386_update_inferior_debug_regs (struct i386_debug_reg_state *state,
- struct i386_debug_reg_state *new_state)
-{
- int i;
-
- ALL_DEBUG_REGISTERS (i)
- {
- if (I386_DR_VACANT (new_state, i) != I386_DR_VACANT (state, i))
- i386_dr_low_set_addr (new_state, i);
- else
- gdb_assert (new_state->dr_mirror[i] == state->dr_mirror[i]);
- }
-
- if (new_state->dr_control_mirror != state->dr_control_mirror)
- i386_dr_low_set_control (new_state);
-
- *state = *new_state;
-}
-
-/* Insert a watchpoint to watch a memory region which starts at
- address ADDR and whose length is LEN bytes. Watch memory accesses
- of the type TYPE. Return 0 on success, -1 on failure. */
-
-int
-i386_dr_insert_watchpoint (struct i386_debug_reg_state *state,
- enum target_hw_bp_type type,
- CORE_ADDR addr, int len)
-{
- int retval;
- /* Work on a local copy of the debug registers, and on success,
- commit the change back to the inferior. */
- struct i386_debug_reg_state local_state = *state;
-
- if (type == hw_read)
- return 1; /* unsupported */
-
- if (((len != 1 && len != 2 && len != 4)
- && !(TARGET_HAS_DR_LEN_8 && len == 8))
- || addr % len != 0)
- {
- retval = i386_handle_nonaligned_watchpoint (&local_state,
- WP_INSERT,
- addr, len, type);
- }
- else
- {
- unsigned len_rw = i386_length_and_rw_bits (len, type);
-
- retval = i386_insert_aligned_watchpoint (&local_state,
- addr, len_rw);
- }
-
- if (retval == 0)
- i386_update_inferior_debug_regs (state, &local_state);
-
- if (debug_hw_points)
- i386_show_dr (state, "insert_watchpoint", addr, len, type);
-
- return retval;
-}
-
-/* Remove a watchpoint that watched the memory region which starts at
- address ADDR, whose length is LEN bytes, and for accesses of the
- type TYPE. Return 0 on success, -1 on failure. */
-
-int
-i386_dr_remove_watchpoint (struct i386_debug_reg_state *state,
- enum target_hw_bp_type type,
- CORE_ADDR addr, int len)
-{
- int retval;
- /* Work on a local copy of the debug registers, and on success,
- commit the change back to the inferior. */
- struct i386_debug_reg_state local_state = *state;
-
- if (((len != 1 && len != 2 && len != 4)
- && !(TARGET_HAS_DR_LEN_8 && len == 8))
- || addr % len != 0)
- {
- retval = i386_handle_nonaligned_watchpoint (&local_state,
- WP_REMOVE,
- addr, len, type);
- }
- else
- {
- unsigned len_rw = i386_length_and_rw_bits (len, type);
-
- retval = i386_remove_aligned_watchpoint (&local_state,
- addr, len_rw);
- }
-
- if (retval == 0)
- i386_update_inferior_debug_regs (state, &local_state);
-
- if (debug_hw_points)
- i386_show_dr (state, "remove_watchpoint", addr, len, type);
-
- return retval;
-}
-
-/* Return non-zero if we can watch a memory region that starts at
- address ADDR and whose length is LEN bytes. */
-
-int
-i386_dr_region_ok_for_watchpoint (struct i386_debug_reg_state *state,
- CORE_ADDR addr, int len)
-{
- int nregs;
-
- /* Compute how many aligned watchpoints we would need to cover this
- region. */
- nregs = i386_handle_nonaligned_watchpoint (state, WP_COUNT,
- addr, len, hw_write);
- return nregs <= DR_NADDR ? 1 : 0;
-}
-
-/* If the inferior has some break/watchpoint that triggered, set the
- address associated with that break/watchpoint and return non-zero.
- Otherwise, return zero. */
-
-int
-i386_dr_stopped_data_address (struct i386_debug_reg_state *state,
- CORE_ADDR *addr_p)
-{
- CORE_ADDR addr = 0;
- int i;
- int rc = 0;
- /* The current thread's DR_STATUS. We always need to read this to
- check whether some watchpoint caused the trap. */
- unsigned status;
- /* We need DR_CONTROL as well, but only iff DR_STATUS indicates a
- data breakpoint trap. Only fetch it when necessary, to avoid an
- unnecessary extra syscall when no watchpoint triggered. */
- int control_p = 0;
- unsigned control = 0;
-
- /* In non-stop/async, threads can be running while we change the
- global dr_mirror (and friends). Say, we set a watchpoint, and
- let threads resume. Now, say you delete the watchpoint, or
- add/remove watchpoints such that dr_mirror changes while threads
- are running. On targets that support non-stop,
- inserting/deleting watchpoints updates the global dr_mirror only.
- It does not update the real thread's debug registers; that's only
- done prior to resume. Instead, if threads are running when the
- mirror changes, a temporary and transparent stop on all threads
- is forced so they can get their copy of the debug registers
- updated on re-resume. Now, say, a thread hit a watchpoint before
- having been updated with the new dr_mirror contents, and we
- haven't yet handled the corresponding SIGTRAP. If we trusted
- dr_mirror below, we'd mistake the real trapped address (from the
- last time we had updated debug registers in the thread) with
- whatever was currently in dr_mirror. So to fix this, dr_mirror
- always represents intention, what we _want_ threads to have in
- debug registers. To get at the address and cause of the trap, we
- need to read the state the thread still has in its debug
- registers.
-
- In sum, always get the current debug register values the current
- thread has, instead of trusting the global mirror. If the thread
- was running when we last changed watchpoints, the mirror no
- longer represents what was set in this thread's debug
- registers. */
- status = i386_dr_low_get_status ();
-
- ALL_DEBUG_REGISTERS (i)
- {
- if (!I386_DR_WATCH_HIT (status, i))
- continue;
-
- if (!control_p)
- {
- control = i386_dr_low_get_control ();
- control_p = 1;
- }
-
- /* This second condition makes sure DRi is set up for a data
- watchpoint, not a hardware breakpoint. The reason is that
- GDB doesn't call the target_stopped_data_address method
- except for data watchpoints. In other words, I'm being
- paranoiac. */
- if (I386_DR_GET_RW_LEN (control, i) != 0)
- {
- addr = i386_dr_low_get_addr (i);
- rc = 1;
- if (debug_hw_points)
- i386_show_dr (state, "watchpoint_hit", addr, -1, hw_write);
- }
- }
-
- if (debug_hw_points && addr == 0)
- i386_show_dr (state, "stopped_data_addr", 0, 0, hw_write);
-
- if (rc)
- *addr_p = addr;
- return rc;
-}
-
-/* Return non-zero if the inferior has some watchpoint that triggered.
- Otherwise return zero. */
-
-int
-i386_dr_stopped_by_watchpoint (struct i386_debug_reg_state *state)
-{
- CORE_ADDR addr = 0;
- return i386_dr_stopped_data_address (state, &addr);
-}
+++ /dev/null
-/* Debug register code for the i386.
-
- Copyright (C) 2009-2014 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-/* Support for hardware watchpoints and breakpoints using the i386
- debug registers.
-
- This provides several functions for inserting and removing
- hardware-assisted breakpoints and watchpoints, testing if one or
- more of the watchpoints triggered and at what address, checking
- whether a given region can be watched, etc.
-
- The functions below implement debug registers sharing by reference
- counts, and allow to watch regions up to 16 bytes long
- (32 bytes on 64 bit hosts). */
-
-#ifndef I386_DREGS_H
-#define I386_DREGS_H 1
-
-/* Forward declaration. */
-enum target_hw_bp_type;
-
-/* Low-level function vector. */
-
-struct i386_dr_low_type
- {
- /* Set the debug control (DR7) register to a given value for
- all LWPs. May be NULL if the debug control register cannot
- be set. */
- void (*set_control) (unsigned long);
-
- /* Put an address into one debug register for all LWPs. May
- be NULL if debug registers cannot be set*/
- void (*set_addr) (int, CORE_ADDR);
-
- /* Return the address in a given debug register of the current
- LWP. */
- CORE_ADDR (*get_addr) (int);
-
- /* Return the value of the debug status (DR6) register for
- current LWP. */
- unsigned long (*get_status) (void);
-
- /* Return the value of the debug control (DR7) register for
- current LWP. */
- unsigned long (*get_control) (void);
-
- /* Number of bytes used for debug registers (4 or 8). */
- int debug_register_length;
- };
-
-extern struct i386_dr_low_type i386_dr_low;
-
-/* Debug registers' indices. */
-#define DR_FIRSTADDR 0
-#define DR_LASTADDR 3
-#define DR_NADDR 4 /* The number of debug address registers. */
-#define DR_STATUS 6 /* Index of debug status register (DR6). */
-#define DR_CONTROL 7 /* Index of debug control register (DR7). */
-
-/* Global state needed to track h/w watchpoints. */
-
-struct i386_debug_reg_state
-{
- /* Mirror the inferior's DRi registers. We keep the status and
- control registers separated because they don't hold addresses.
- Note that since we can change these mirrors while threads are
- running, we never trust them to explain a cause of a trap.
- For that, we need to peek directly in the inferior registers. */
- CORE_ADDR dr_mirror[DR_NADDR];
- unsigned dr_status_mirror, dr_control_mirror;
-
- /* Reference counts for each debug register. */
- int dr_ref_count[DR_NADDR];
-};
-
-/* A macro to loop over all debug registers. */
-#define ALL_DEBUG_REGISTERS(i) for (i = 0; i < DR_NADDR; i++)
-
-/* Insert a watchpoint to watch a memory region which starts at
- address ADDR and whose length is LEN bytes. Watch memory accesses
- of the type TYPE. Return 0 on success, -1 on failure. */
-extern int i386_dr_insert_watchpoint (struct i386_debug_reg_state *state,
- enum target_hw_bp_type type,
- CORE_ADDR addr,
- int len);
-
-/* Remove a watchpoint that watched the memory region which starts at
- address ADDR, whose length is LEN bytes, and for accesses of the
- type TYPE. Return 0 on success, -1 on failure. */
-extern int i386_dr_remove_watchpoint (struct i386_debug_reg_state *state,
- enum target_hw_bp_type type,
- CORE_ADDR addr,
- int len);
-
-/* Return non-zero if we can watch a memory region that starts at
- address ADDR and whose length is LEN bytes. */
-extern int i386_dr_region_ok_for_watchpoint (struct i386_debug_reg_state *state,
- CORE_ADDR addr, int len);
-
-/* If the inferior has some break/watchpoint that triggered, set the
- address associated with that break/watchpoint and return true.
- Otherwise, return false. */
-extern int i386_dr_stopped_data_address (struct i386_debug_reg_state *state,
- CORE_ADDR *addr_p);
-
-/* Return true if the inferior has some watchpoint that triggered.
- Otherwise return false. */
-extern int i386_dr_stopped_by_watchpoint (struct i386_debug_reg_state *state);
-
-#endif /* I386_DREGS_H */
+++ /dev/null
-/*
- * Helper cpuid.h file copied from gcc-4.8.0. Code in gdb should not
- * include this directly, but pull in i386-cpuid.h and use that func.
- */
-/*
- * Copyright (C) 2007-2014 Free Software Foundation, Inc.
- *
- * This file is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 3, or (at your option) any
- * later version.
- *
- * This file is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * Under Section 7 of GPL version 3, you are granted additional
- * permissions described in the GCC Runtime Library Exception, version
- * 3.1, as published by the Free Software Foundation.
- *
- * You should have received a copy of the GNU General Public License and
- * a copy of the GCC Runtime Library Exception along with this program;
- * see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
- * <http://www.gnu.org/licenses/>.
- */
-
-/* %ecx */
-#define bit_SSE3 (1 << 0)
-#define bit_PCLMUL (1 << 1)
-#define bit_LZCNT (1 << 5)
-#define bit_SSSE3 (1 << 9)
-#define bit_FMA (1 << 12)
-#define bit_CMPXCHG16B (1 << 13)
-#define bit_SSE4_1 (1 << 19)
-#define bit_SSE4_2 (1 << 20)
-#define bit_MOVBE (1 << 22)
-#define bit_POPCNT (1 << 23)
-#define bit_AES (1 << 25)
-#define bit_XSAVE (1 << 26)
-#define bit_OSXSAVE (1 << 27)
-#define bit_AVX (1 << 28)
-#define bit_F16C (1 << 29)
-#define bit_RDRND (1 << 30)
-
-/* %edx */
-#define bit_CMPXCHG8B (1 << 8)
-#define bit_CMOV (1 << 15)
-#define bit_MMX (1 << 23)
-#define bit_FXSAVE (1 << 24)
-#define bit_SSE (1 << 25)
-#define bit_SSE2 (1 << 26)
-
-/* Extended Features */
-/* %ecx */
-#define bit_LAHF_LM (1 << 0)
-#define bit_ABM (1 << 5)
-#define bit_SSE4a (1 << 6)
-#define bit_PRFCHW (1 << 8)
-#define bit_XOP (1 << 11)
-#define bit_LWP (1 << 15)
-#define bit_FMA4 (1 << 16)
-#define bit_TBM (1 << 21)
-
-/* %edx */
-#define bit_MMXEXT (1 << 22)
-#define bit_LM (1 << 29)
-#define bit_3DNOWP (1 << 30)
-#define bit_3DNOW (1 << 31)
-
-/* Extended Features (%eax == 7) */
-#define bit_FSGSBASE (1 << 0)
-#define bit_BMI (1 << 3)
-#define bit_HLE (1 << 4)
-#define bit_AVX2 (1 << 5)
-#define bit_BMI2 (1 << 8)
-#define bit_RTM (1 << 11)
-#define bit_AVX512F (1 << 16)
-#define bit_MPX (1 << 14)
-#define bit_RDSEED (1 << 18)
-#define bit_ADX (1 << 19)
-#define bit_AVX512PF (1 << 26)
-#define bit_AVX512ER (1 << 27)
-#define bit_AVX512CD (1 << 28)
-#define bit_SHA (1 << 29)
-
-/* Extended State Enumeration Sub-leaf (%eax == 13, %ecx == 1) */
-#define bit_XSAVEOPT (1 << 0)
-
-/* Signatures for different CPU implementations as returned in uses
- of cpuid with level 0. */
-#define signature_AMD_ebx 0x68747541
-#define signature_AMD_ecx 0x444d4163
-#define signature_AMD_edx 0x69746e65
-
-#define signature_CENTAUR_ebx 0x746e6543
-#define signature_CENTAUR_ecx 0x736c7561
-#define signature_CENTAUR_edx 0x48727561
-
-#define signature_CYRIX_ebx 0x69727943
-#define signature_CYRIX_ecx 0x64616574
-#define signature_CYRIX_edx 0x736e4978
-
-#define signature_INTEL_ebx 0x756e6547
-#define signature_INTEL_ecx 0x6c65746e
-#define signature_INTEL_edx 0x49656e69
-
-#define signature_TM1_ebx 0x6e617254
-#define signature_TM1_ecx 0x55504361
-#define signature_TM1_edx 0x74656d73
-
-#define signature_TM2_ebx 0x756e6547
-#define signature_TM2_ecx 0x3638784d
-#define signature_TM2_edx 0x54656e69
-
-#define signature_NSC_ebx 0x646f6547
-#define signature_NSC_ecx 0x43534e20
-#define signature_NSC_edx 0x79622065
-
-#define signature_NEXGEN_ebx 0x4778654e
-#define signature_NEXGEN_ecx 0x6e657669
-#define signature_NEXGEN_edx 0x72446e65
-
-#define signature_RISE_ebx 0x65736952
-#define signature_RISE_ecx 0x65736952
-#define signature_RISE_edx 0x65736952
-
-#define signature_SIS_ebx 0x20536953
-#define signature_SIS_ecx 0x20536953
-#define signature_SIS_edx 0x20536953
-
-#define signature_UMC_ebx 0x20434d55
-#define signature_UMC_ecx 0x20434d55
-#define signature_UMC_edx 0x20434d55
-
-#define signature_VIA_ebx 0x20414956
-#define signature_VIA_ecx 0x20414956
-#define signature_VIA_edx 0x20414956
-
-#define signature_VORTEX_ebx 0x74726f56
-#define signature_VORTEX_ecx 0x436f5320
-#define signature_VORTEX_edx 0x36387865
-
-#if defined(__i386__) && defined(__PIC__)
-/* %ebx may be the PIC register. */
-#if __GNUC__ >= 3
-#define __cpuid(level, a, b, c, d) \
- __asm__ ("xchg{l}\t{%%}ebx, %k1\n\t" \
- "cpuid\n\t" \
- "xchg{l}\t{%%}ebx, %k1\n\t" \
- : "=a" (a), "=&r" (b), "=c" (c), "=d" (d) \
- : "0" (level))
-
-#define __cpuid_count(level, count, a, b, c, d) \
- __asm__ ("xchg{l}\t{%%}ebx, %k1\n\t" \
- "cpuid\n\t" \
- "xchg{l}\t{%%}ebx, %k1\n\t" \
- : "=a" (a), "=&r" (b), "=c" (c), "=d" (d) \
- : "0" (level), "2" (count))
-#else
-/* Host GCCs older than 3.0 weren't supporting Intel asm syntax
- nor alternatives in i386 code. */
-#define __cpuid(level, a, b, c, d) \
- __asm__ ("xchgl\t%%ebx, %k1\n\t" \
- "cpuid\n\t" \
- "xchgl\t%%ebx, %k1\n\t" \
- : "=a" (a), "=&r" (b), "=c" (c), "=d" (d) \
- : "0" (level))
-
-#define __cpuid_count(level, count, a, b, c, d) \
- __asm__ ("xchgl\t%%ebx, %k1\n\t" \
- "cpuid\n\t" \
- "xchgl\t%%ebx, %k1\n\t" \
- : "=a" (a), "=&r" (b), "=c" (c), "=d" (d) \
- : "0" (level), "2" (count))
-#endif
-#elif defined(__x86_64__) && (defined(__code_model_medium__) || defined(__code_model_large__)) && defined(__PIC__)
-/* %rbx may be the PIC register. */
-#define __cpuid(level, a, b, c, d) \
- __asm__ ("xchg{q}\t{%%}rbx, %q1\n\t" \
- "cpuid\n\t" \
- "xchg{q}\t{%%}rbx, %q1\n\t" \
- : "=a" (a), "=&r" (b), "=c" (c), "=d" (d) \
- : "0" (level))
-
-#define __cpuid_count(level, count, a, b, c, d) \
- __asm__ ("xchg{q}\t{%%}rbx, %q1\n\t" \
- "cpuid\n\t" \
- "xchg{q}\t{%%}rbx, %q1\n\t" \
- : "=a" (a), "=&r" (b), "=c" (c), "=d" (d) \
- : "0" (level), "2" (count))
-#else
-#define __cpuid(level, a, b, c, d) \
- __asm__ ("cpuid\n\t" \
- : "=a" (a), "=b" (b), "=c" (c), "=d" (d) \
- : "0" (level))
-
-#define __cpuid_count(level, count, a, b, c, d) \
- __asm__ ("cpuid\n\t" \
- : "=a" (a), "=b" (b), "=c" (c), "=d" (d) \
- : "0" (level), "2" (count))
-#endif
-
-/* Return highest supported input value for cpuid instruction. ext can
- be either 0x0 or 0x8000000 to return highest supported value for
- basic or extended cpuid information. Function returns 0 if cpuid
- is not supported or whatever cpuid returns in eax register. If sig
- pointer is non-null, then first four bytes of the signature
- (as found in ebx register) are returned in location pointed by sig. */
-
-static __inline unsigned int
-__get_cpuid_max (unsigned int __ext, unsigned int *__sig)
-{
- unsigned int __eax, __ebx, __ecx, __edx;
-
-#ifndef __x86_64__
- /* See if we can use cpuid. On AMD64 we always can. */
-#if __GNUC__ >= 3
- __asm__ ("pushf{l|d}\n\t"
- "pushf{l|d}\n\t"
- "pop{l}\t%0\n\t"
- "mov{l}\t{%0, %1|%1, %0}\n\t"
- "xor{l}\t{%2, %0|%0, %2}\n\t"
- "push{l}\t%0\n\t"
- "popf{l|d}\n\t"
- "pushf{l|d}\n\t"
- "pop{l}\t%0\n\t"
- "popf{l|d}\n\t"
- : "=&r" (__eax), "=&r" (__ebx)
- : "i" (0x00200000));
-#else
-/* Host GCCs older than 3.0 weren't supporting Intel asm syntax
- nor alternatives in i386 code. */
- __asm__ ("pushfl\n\t"
- "pushfl\n\t"
- "popl\t%0\n\t"
- "movl\t%0, %1\n\t"
- "xorl\t%2, %0\n\t"
- "pushl\t%0\n\t"
- "popfl\n\t"
- "pushfl\n\t"
- "popl\t%0\n\t"
- "popfl\n\t"
- : "=&r" (__eax), "=&r" (__ebx)
- : "i" (0x00200000));
-#endif
-
- if (!((__eax ^ __ebx) & 0x00200000))
- return 0;
-#endif
-
- /* Host supports cpuid. Return highest supported cpuid input value. */
- __cpuid (__ext, __eax, __ebx, __ecx, __edx);
-
- if (__sig)
- *__sig = __ebx;
-
- return __eax;
-}
-
-/* Return cpuid data for requested cpuid level, as found in returned
- eax, ebx, ecx and edx registers. The function checks if cpuid is
- supported and returns 1 for valid cpuid information or 0 for
- unsupported cpuid level. All pointers are required to be non-null. */
-
-static __inline int
-__get_cpuid (unsigned int __level,
- unsigned int *__eax, unsigned int *__ebx,
- unsigned int *__ecx, unsigned int *__edx)
-{
- unsigned int __ext = __level & 0x80000000;
-
- if (__get_cpuid_max (__ext, 0) < __level)
- return 0;
-
- __cpuid (__level, *__eax, *__ebx, *__ecx, *__edx);
- return 1;
-}
#include "regcache.h"
#include "gdbthread.h"
#include "gdb_wait.h"
-#include "i386-cpuid.h"
+#include "x86-cpuid.h"
#ifdef HAVE_SYS_SYSCALL_H
#include <sys/syscall.h>
{
unsigned int cpuid, model, family;
- if (!i386_cpuid (1, &cpuid, NULL, NULL, NULL))
+ if (!x86_cpuid (1, &cpuid, NULL, NULL, NULL))
return 0;
family = (cpuid >> 8) & 0xf;
{
unsigned int ebx, ecx, edx;
- if (!i386_cpuid (0, NULL, &ebx, &ecx, &edx))
+ if (!x86_cpuid (0, NULL, &ebx, &ecx, &edx))
return 0;
if (ebx == signature_INTEL_ebx && ecx == signature_INTEL_ecx
--- /dev/null
+/* C API for x86 cpuid insn.
+ Copyright (C) 2007-2014 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This file is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by the
+ Free Software Foundation; either version 3, or (at your option) any
+ later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#ifndef X86_CPUID_COMMON_H
+#define X86_CPUID_COMMON_H
+
+/* Always include the header for the cpu bit defines. */
+#include "x86-gcc-cpuid.h"
+
+#if defined(__i386__) || defined(__x86_64__)
+
+/* Return cpuid data for requested cpuid level, as found in returned
+ eax, ebx, ecx and edx registers. The function checks if cpuid is
+ supported and returns 1 for valid cpuid information or 0 for
+ unsupported cpuid level. Pointers may be non-null. */
+
+static __inline int
+x86_cpuid (unsigned int __level,
+ unsigned int *__eax, unsigned int *__ebx,
+ unsigned int *__ecx, unsigned int *__edx)
+{
+ unsigned int __scratch;
+
+ if (!__eax)
+ __eax = &__scratch;
+ if (!__ebx)
+ __ebx = &__scratch;
+ if (!__ecx)
+ __ecx = &__scratch;
+ if (!__edx)
+ __edx = &__scratch;
+
+ return __get_cpuid (__level, __eax, __ebx, __ecx, __edx);
+}
+
+#else
+
+static __inline int
+x86_cpuid (unsigned int __level,
+ unsigned int *__eax, unsigned int *__ebx,
+ unsigned int *__ecx, unsigned int *__edx)
+{
+ return 0;
+}
+
+#endif /* i386 && x86_64 */
+
+#endif /* X86_CPUID_COMMON_H */
--- /dev/null
+/* Debug register code for x86 (i386 and x86-64).
+
+ Copyright (C) 2001-2014 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#ifdef GDBSERVER
+#include "server.h"
+#else
+#include "defs.h"
+#include "inferior.h"
+#endif
+#include "x86-dregs.h"
+
+/* Support for hardware watchpoints and breakpoints using the x86
+ debug registers.
+
+ This provides several functions for inserting and removing
+ hardware-assisted breakpoints and watchpoints, testing if one or
+ more of the watchpoints triggered and at what address, checking
+ whether a given region can be watched, etc.
+
+ The functions below implement debug registers sharing by reference
+ counts, and allow to watch regions up to 16 bytes long. */
+
+/* Accessor macros for low-level function vector. */
+
+/* Can we update the inferior's debug registers? */
+#define x86_dr_low_can_set_addr() (x86_dr_low.set_addr != NULL)
+
+/* Update the inferior's debug register REGNUM from STATE. */
+#define x86_dr_low_set_addr(new_state, i) \
+ (x86_dr_low.set_addr ((i), (new_state)->dr_mirror[(i)]))
+
+/* Return the inferior's debug register REGNUM. */
+#define x86_dr_low_get_addr(i) (x86_dr_low.get_addr ((i)))
+
+/* Can we update the inferior's DR7 control register? */
+#define x86_dr_low_can_set_control() (x86_dr_low.set_control != NULL)
+
+/* Update the inferior's DR7 debug control register from STATE. */
+#define x86_dr_low_set_control(new_state) \
+ (x86_dr_low.set_control ((new_state)->dr_control_mirror))
+
+/* Return the value of the inferior's DR7 debug control register. */
+#define x86_dr_low_get_control() (x86_dr_low.get_control ())
+
+/* Return the value of the inferior's DR6 debug status register. */
+#define x86_dr_low_get_status() (x86_dr_low.get_status ())
+
+/* Return the debug register size, in bytes. */
+#define x86_get_debug_register_length() \
+ (x86_dr_low.debug_register_length)
+
+/* Support for 8-byte wide hw watchpoints. */
+#define TARGET_HAS_DR_LEN_8 (x86_get_debug_register_length () == 8)
+
+/* DR7 Debug Control register fields. */
+
+/* How many bits to skip in DR7 to get to R/W and LEN fields. */
+#define DR_CONTROL_SHIFT 16
+/* How many bits in DR7 per R/W and LEN field for each watchpoint. */
+#define DR_CONTROL_SIZE 4
+
+/* Watchpoint/breakpoint read/write fields in DR7. */
+#define DR_RW_EXECUTE (0x0) /* Break on instruction execution. */
+#define DR_RW_WRITE (0x1) /* Break on data writes. */
+#define DR_RW_READ (0x3) /* Break on data reads or writes. */
+
+/* This is here for completeness. No platform supports this
+ functionality yet (as of March 2001). Note that the DE flag in the
+ CR4 register needs to be set to support this. */
+#ifndef DR_RW_IORW
+#define DR_RW_IORW (0x2) /* Break on I/O reads or writes. */
+#endif
+
+/* Watchpoint/breakpoint length fields in DR7. The 2-bit left shift
+ is so we could OR this with the read/write field defined above. */
+#define DR_LEN_1 (0x0 << 2) /* 1-byte region watch or breakpoint. */
+#define DR_LEN_2 (0x1 << 2) /* 2-byte region watch. */
+#define DR_LEN_4 (0x3 << 2) /* 4-byte region watch. */
+#define DR_LEN_8 (0x2 << 2) /* 8-byte region watch (AMD64). */
+
+/* Local and Global Enable flags in DR7.
+
+ When the Local Enable flag is set, the breakpoint/watchpoint is
+ enabled only for the current task; the processor automatically
+ clears this flag on every task switch. When the Global Enable flag
+ is set, the breakpoint/watchpoint is enabled for all tasks; the
+ processor never clears this flag.
+
+ Currently, all watchpoint are locally enabled. If you need to
+ enable them globally, read the comment which pertains to this in
+ x86_insert_aligned_watchpoint below. */
+#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit. */
+#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit. */
+#define DR_ENABLE_SIZE 2 /* Two enable bits per debug register. */
+
+/* Local and global exact breakpoint enable flags (a.k.a. slowdown
+ flags). These are only required on i386, to allow detection of the
+ exact instruction which caused a watchpoint to break; i486 and
+ later processors do that automatically. We set these flags for
+ backwards compatibility. */
+#define DR_LOCAL_SLOWDOWN (0x100)
+#define DR_GLOBAL_SLOWDOWN (0x200)
+
+/* Fields reserved by Intel. This includes the GD (General Detect
+ Enable) flag, which causes a debug exception to be generated when a
+ MOV instruction accesses one of the debug registers.
+
+ FIXME: My Intel manual says we should use 0xF800, not 0xFC00. */
+#define DR_CONTROL_RESERVED (0xFC00)
+
+/* Auxiliary helper macros. */
+
+/* A value that masks all fields in DR7 that are reserved by Intel. */
+#define X86_DR_CONTROL_MASK (~DR_CONTROL_RESERVED)
+
+/* The I'th debug register is vacant if its Local and Global Enable
+ bits are reset in the Debug Control register. */
+#define X86_DR_VACANT(state, i) \
+ (((state)->dr_control_mirror & (3 << (DR_ENABLE_SIZE * (i)))) == 0)
+
+/* Locally enable the break/watchpoint in the I'th debug register. */
+#define X86_DR_LOCAL_ENABLE(state, i) \
+ do { \
+ (state)->dr_control_mirror |= \
+ (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \
+ } while (0)
+
+/* Globally enable the break/watchpoint in the I'th debug register. */
+#define X86_DR_GLOBAL_ENABLE(state, i) \
+ do { \
+ (state)->dr_control_mirror |= \
+ (1 << (DR_GLOBAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \
+ } while (0)
+
+/* Disable the break/watchpoint in the I'th debug register. */
+#define X86_DR_DISABLE(state, i) \
+ do { \
+ (state)->dr_control_mirror &= \
+ ~(3 << (DR_ENABLE_SIZE * (i))); \
+ } while (0)
+
+/* Set in DR7 the RW and LEN fields for the I'th debug register. */
+#define X86_DR_SET_RW_LEN(state, i, rwlen) \
+ do { \
+ (state)->dr_control_mirror &= \
+ ~(0x0f << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \
+ (state)->dr_control_mirror |= \
+ ((rwlen) << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \
+ } while (0)
+
+/* Get from DR7 the RW and LEN fields for the I'th debug register. */
+#define X86_DR_GET_RW_LEN(dr7, i) \
+ (((dr7) \
+ >> (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))) & 0x0f)
+
+/* Did the watchpoint whose address is in the I'th register break? */
+#define X86_DR_WATCH_HIT(dr6, i) ((dr6) & (1 << (i)))
+
+/* Types of operations supported by x86_handle_nonaligned_watchpoint. */
+typedef enum { WP_INSERT, WP_REMOVE, WP_COUNT } x86_wp_op_t;
+
+#ifndef GDBSERVER
+/* Whether or not to print the mirrored debug registers. */
+extern int debug_hw_points;
+#endif
+
+/* Print the values of the mirrored debug registers. */
+
+static void
+x86_show_dr (struct x86_debug_reg_state *state,
+ const char *func, CORE_ADDR addr,
+ int len, enum target_hw_bp_type type)
+{
+ int i;
+
+ debug_printf ("%s", func);
+ if (addr || len)
+ debug_printf (" (addr=%s, len=%d, type=%s)",
+ phex (addr, 8), len,
+ type == hw_write ? "data-write"
+ : (type == hw_read ? "data-read"
+ : (type == hw_access ? "data-read/write"
+ : (type == hw_execute ? "instruction-execute"
+ /* FIXME: if/when I/O read/write
+ watchpoints are supported, add them
+ here. */
+ : "??unknown??"))));
+ debug_printf (":\n");
+ debug_printf ("\tCONTROL (DR7): %s STATUS (DR6): %s\n",
+ phex (state->dr_control_mirror, 8),
+ phex (state->dr_status_mirror, 8));
+ ALL_DEBUG_REGISTERS (i)
+ {
+ debug_printf ("\
+\tDR%d: addr=0x%s, ref.count=%d DR%d: addr=0x%s, ref.count=%d\n",
+ i, phex (state->dr_mirror[i],
+ x86_get_debug_register_length ()),
+ state->dr_ref_count[i],
+ i + 1, phex (state->dr_mirror[i + 1],
+ x86_get_debug_register_length ()),
+ state->dr_ref_count[i + 1]);
+ i++;
+ }
+}
+
+/* Return the value of a 4-bit field for DR7 suitable for watching a
+ region of LEN bytes for accesses of type TYPE. LEN is assumed to
+ have the value of 1, 2, or 4. */
+
+static unsigned
+x86_length_and_rw_bits (int len, enum target_hw_bp_type type)
+{
+ unsigned rw;
+
+ switch (type)
+ {
+ case hw_execute:
+ rw = DR_RW_EXECUTE;
+ break;
+ case hw_write:
+ rw = DR_RW_WRITE;
+ break;
+ case hw_read:
+ internal_error (__FILE__, __LINE__,
+ _("The i386 doesn't support "
+ "data-read watchpoints.\n"));
+ case hw_access:
+ rw = DR_RW_READ;
+ break;
+#if 0
+ /* Not yet supported. */
+ case hw_io_access:
+ rw = DR_RW_IORW;
+ break;
+#endif
+ default:
+ internal_error (__FILE__, __LINE__, _("\
+Invalid hardware breakpoint type %d in x86_length_and_rw_bits.\n"),
+ (int) type);
+ }
+
+ switch (len)
+ {
+ case 1:
+ return (DR_LEN_1 | rw);
+ case 2:
+ return (DR_LEN_2 | rw);
+ case 4:
+ return (DR_LEN_4 | rw);
+ case 8:
+ if (TARGET_HAS_DR_LEN_8)
+ return (DR_LEN_8 | rw);
+ /* ELSE FALL THROUGH */
+ default:
+ internal_error (__FILE__, __LINE__, _("\
+Invalid hardware breakpoint length %d in x86_length_and_rw_bits.\n"), len);
+ }
+}
+
+/* Insert a watchpoint at address ADDR, which is assumed to be aligned
+ according to the length of the region to watch. LEN_RW_BITS is the
+ value of the bits from DR7 which describes the length and access
+ type of the region to be watched by this watchpoint. Return 0 on
+ success, -1 on failure. */
+
+static int
+x86_insert_aligned_watchpoint (struct x86_debug_reg_state *state,
+ CORE_ADDR addr, unsigned len_rw_bits)
+{
+ int i;
+
+ if (!x86_dr_low_can_set_addr () || !x86_dr_low_can_set_control ())
+ return -1;
+
+ /* First, look for an occupied debug register with the same address
+ and the same RW and LEN definitions. If we find one, we can
+ reuse it for this watchpoint as well (and save a register). */
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (!X86_DR_VACANT (state, i)
+ && state->dr_mirror[i] == addr
+ && X86_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits)
+ {
+ state->dr_ref_count[i]++;
+ return 0;
+ }
+ }
+
+ /* Next, look for a vacant debug register. */
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (X86_DR_VACANT (state, i))
+ break;
+ }
+
+ /* No more debug registers! */
+ if (i >= DR_NADDR)
+ return -1;
+
+ /* Now set up the register I to watch our region. */
+
+ /* Record the info in our local mirrored array. */
+ state->dr_mirror[i] = addr;
+ state->dr_ref_count[i] = 1;
+ X86_DR_SET_RW_LEN (state, i, len_rw_bits);
+ /* Note: we only enable the watchpoint locally, i.e. in the current
+ task. Currently, no x86 target allows or supports global
+ watchpoints; however, if any target would want that in the
+ future, GDB should probably provide a command to control whether
+ to enable watchpoints globally or locally, and the code below
+ should use global or local enable and slow-down flags as
+ appropriate. */
+ X86_DR_LOCAL_ENABLE (state, i);
+ state->dr_control_mirror |= DR_LOCAL_SLOWDOWN;
+ state->dr_control_mirror &= X86_DR_CONTROL_MASK;
+
+ return 0;
+}
+
+/* Remove a watchpoint at address ADDR, which is assumed to be aligned
+ according to the length of the region to watch. LEN_RW_BITS is the
+ value of the bits from DR7 which describes the length and access
+ type of the region watched by this watchpoint. Return 0 on
+ success, -1 on failure. */
+
+static int
+x86_remove_aligned_watchpoint (struct x86_debug_reg_state *state,
+ CORE_ADDR addr, unsigned len_rw_bits)
+{
+ int i, retval = -1;
+ int all_vacant = 1;
+
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (!X86_DR_VACANT (state, i)
+ && state->dr_mirror[i] == addr
+ && X86_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits)
+ {
+ if (--state->dr_ref_count[i] == 0) /* No longer in use? */
+ {
+ /* Reset our mirror. */
+ state->dr_mirror[i] = 0;
+ X86_DR_DISABLE (state, i);
+ /* Even though not strictly necessary, clear out all
+ bits in DR_CONTROL related to this debug register.
+ Debug output is clearer when we don't have stale bits
+ in place. This also allows the assertion below. */
+ X86_DR_SET_RW_LEN (state, i, 0);
+ }
+ retval = 0;
+ }
+
+ if (!X86_DR_VACANT (state, i))
+ all_vacant = 0;
+ }
+
+ if (all_vacant)
+ {
+ /* Even though not strictly necessary, clear out all of
+ DR_CONTROL, so that when we have no debug registers in use,
+ we end up with DR_CONTROL == 0. The Linux support relies on
+ this for an optimization. Plus, it makes for clearer debug
+ output. */
+ state->dr_control_mirror &= ~DR_LOCAL_SLOWDOWN;
+
+ gdb_assert (state->dr_control_mirror == 0);
+ }
+ return retval;
+}
+
+/* Insert or remove a (possibly non-aligned) watchpoint, or count the
+ number of debug registers required to watch a region at address
+ ADDR whose length is LEN for accesses of type TYPE. Return 0 on
+ successful insertion or removal, a positive number when queried
+ about the number of registers, or -1 on failure. If WHAT is not a
+ valid value, bombs through internal_error. */
+
+static int
+x86_handle_nonaligned_watchpoint (struct x86_debug_reg_state *state,
+ x86_wp_op_t what, CORE_ADDR addr, int len,
+ enum target_hw_bp_type type)
+{
+ int retval = 0;
+ int max_wp_len = TARGET_HAS_DR_LEN_8 ? 8 : 4;
+
+ static const int size_try_array[8][8] =
+ {
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* Trying size one. */
+ {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size two. */
+ {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size three. */
+ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size four. */
+ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size five. */
+ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size six. */
+ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size seven. */
+ {8, 1, 2, 1, 4, 1, 2, 1}, /* Trying size eight. */
+ };
+
+ while (len > 0)
+ {
+ int align = addr % max_wp_len;
+ /* Four (eight on AMD64) is the maximum length a debug register
+ can watch. */
+ int try = (len > max_wp_len ? (max_wp_len - 1) : len - 1);
+ int size = size_try_array[try][align];
+
+ if (what == WP_COUNT)
+ {
+ /* size_try_array[] is defined such that each iteration
+ through the loop is guaranteed to produce an address and a
+ size that can be watched with a single debug register.
+ Thus, for counting the registers required to watch a
+ region, we simply need to increment the count on each
+ iteration. */
+ retval++;
+ }
+ else
+ {
+ unsigned len_rw = x86_length_and_rw_bits (size, type);
+
+ if (what == WP_INSERT)
+ retval = x86_insert_aligned_watchpoint (state, addr, len_rw);
+ else if (what == WP_REMOVE)
+ retval = x86_remove_aligned_watchpoint (state, addr, len_rw);
+ else
+ internal_error (__FILE__, __LINE__, _("\
+Invalid value %d of operation in x86_handle_nonaligned_watchpoint.\n"),
+ (int) what);
+ if (retval)
+ break;
+ }
+
+ addr += size;
+ len -= size;
+ }
+
+ return retval;
+}
+
+/* Update the inferior debug registers state, in STATE, with the
+ new debug registers state, in NEW_STATE. */
+
+static void
+x86_update_inferior_debug_regs (struct x86_debug_reg_state *state,
+ struct x86_debug_reg_state *new_state)
+{
+ int i;
+
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (X86_DR_VACANT (new_state, i) != X86_DR_VACANT (state, i))
+ x86_dr_low_set_addr (new_state, i);
+ else
+ gdb_assert (new_state->dr_mirror[i] == state->dr_mirror[i]);
+ }
+
+ if (new_state->dr_control_mirror != state->dr_control_mirror)
+ x86_dr_low_set_control (new_state);
+
+ *state = *new_state;
+}
+
+/* Insert a watchpoint to watch a memory region which starts at
+ address ADDR and whose length is LEN bytes. Watch memory accesses
+ of the type TYPE. Return 0 on success, -1 on failure. */
+
+int
+x86_dr_insert_watchpoint (struct x86_debug_reg_state *state,
+ enum target_hw_bp_type type,
+ CORE_ADDR addr, int len)
+{
+ int retval;
+ /* Work on a local copy of the debug registers, and on success,
+ commit the change back to the inferior. */
+ struct x86_debug_reg_state local_state = *state;
+
+ if (type == hw_read)
+ return 1; /* unsupported */
+
+ if (((len != 1 && len != 2 && len != 4)
+ && !(TARGET_HAS_DR_LEN_8 && len == 8))
+ || addr % len != 0)
+ {
+ retval = x86_handle_nonaligned_watchpoint (&local_state,
+ WP_INSERT,
+ addr, len, type);
+ }
+ else
+ {
+ unsigned len_rw = x86_length_and_rw_bits (len, type);
+
+ retval = x86_insert_aligned_watchpoint (&local_state,
+ addr, len_rw);
+ }
+
+ if (retval == 0)
+ x86_update_inferior_debug_regs (state, &local_state);
+
+ if (debug_hw_points)
+ x86_show_dr (state, "insert_watchpoint", addr, len, type);
+
+ return retval;
+}
+
+/* Remove a watchpoint that watched the memory region which starts at
+ address ADDR, whose length is LEN bytes, and for accesses of the
+ type TYPE. Return 0 on success, -1 on failure. */
+
+int
+x86_dr_remove_watchpoint (struct x86_debug_reg_state *state,
+ enum target_hw_bp_type type,
+ CORE_ADDR addr, int len)
+{
+ int retval;
+ /* Work on a local copy of the debug registers, and on success,
+ commit the change back to the inferior. */
+ struct x86_debug_reg_state local_state = *state;
+
+ if (((len != 1 && len != 2 && len != 4)
+ && !(TARGET_HAS_DR_LEN_8 && len == 8))
+ || addr % len != 0)
+ {
+ retval = x86_handle_nonaligned_watchpoint (&local_state,
+ WP_REMOVE,
+ addr, len, type);
+ }
+ else
+ {
+ unsigned len_rw = x86_length_and_rw_bits (len, type);
+
+ retval = x86_remove_aligned_watchpoint (&local_state,
+ addr, len_rw);
+ }
+
+ if (retval == 0)
+ x86_update_inferior_debug_regs (state, &local_state);
+
+ if (debug_hw_points)
+ x86_show_dr (state, "remove_watchpoint", addr, len, type);
+
+ return retval;
+}
+
+/* Return non-zero if we can watch a memory region that starts at
+ address ADDR and whose length is LEN bytes. */
+
+int
+x86_dr_region_ok_for_watchpoint (struct x86_debug_reg_state *state,
+ CORE_ADDR addr, int len)
+{
+ int nregs;
+
+ /* Compute how many aligned watchpoints we would need to cover this
+ region. */
+ nregs = x86_handle_nonaligned_watchpoint (state, WP_COUNT,
+ addr, len, hw_write);
+ return nregs <= DR_NADDR ? 1 : 0;
+}
+
+/* If the inferior has some break/watchpoint that triggered, set the
+ address associated with that break/watchpoint and return non-zero.
+ Otherwise, return zero. */
+
+int
+x86_dr_stopped_data_address (struct x86_debug_reg_state *state,
+ CORE_ADDR *addr_p)
+{
+ CORE_ADDR addr = 0;
+ int i;
+ int rc = 0;
+ /* The current thread's DR_STATUS. We always need to read this to
+ check whether some watchpoint caused the trap. */
+ unsigned status;
+ /* We need DR_CONTROL as well, but only iff DR_STATUS indicates a
+ data breakpoint trap. Only fetch it when necessary, to avoid an
+ unnecessary extra syscall when no watchpoint triggered. */
+ int control_p = 0;
+ unsigned control = 0;
+
+ /* In non-stop/async, threads can be running while we change the
+ global dr_mirror (and friends). Say, we set a watchpoint, and
+ let threads resume. Now, say you delete the watchpoint, or
+ add/remove watchpoints such that dr_mirror changes while threads
+ are running. On targets that support non-stop,
+ inserting/deleting watchpoints updates the global dr_mirror only.
+ It does not update the real thread's debug registers; that's only
+ done prior to resume. Instead, if threads are running when the
+ mirror changes, a temporary and transparent stop on all threads
+ is forced so they can get their copy of the debug registers
+ updated on re-resume. Now, say, a thread hit a watchpoint before
+ having been updated with the new dr_mirror contents, and we
+ haven't yet handled the corresponding SIGTRAP. If we trusted
+ dr_mirror below, we'd mistake the real trapped address (from the
+ last time we had updated debug registers in the thread) with
+ whatever was currently in dr_mirror. So to fix this, dr_mirror
+ always represents intention, what we _want_ threads to have in
+ debug registers. To get at the address and cause of the trap, we
+ need to read the state the thread still has in its debug
+ registers.
+
+ In sum, always get the current debug register values the current
+ thread has, instead of trusting the global mirror. If the thread
+ was running when we last changed watchpoints, the mirror no
+ longer represents what was set in this thread's debug
+ registers. */
+ status = x86_dr_low_get_status ();
+
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (!X86_DR_WATCH_HIT (status, i))
+ continue;
+
+ if (!control_p)
+ {
+ control = x86_dr_low_get_control ();
+ control_p = 1;
+ }
+
+ /* This second condition makes sure DRi is set up for a data
+ watchpoint, not a hardware breakpoint. The reason is that
+ GDB doesn't call the target_stopped_data_address method
+ except for data watchpoints. In other words, I'm being
+ paranoiac. */
+ if (X86_DR_GET_RW_LEN (control, i) != 0)
+ {
+ addr = x86_dr_low_get_addr (i);
+ rc = 1;
+ if (debug_hw_points)
+ x86_show_dr (state, "watchpoint_hit", addr, -1, hw_write);
+ }
+ }
+
+ if (debug_hw_points && addr == 0)
+ x86_show_dr (state, "stopped_data_addr", 0, 0, hw_write);
+
+ if (rc)
+ *addr_p = addr;
+ return rc;
+}
+
+/* Return non-zero if the inferior has some watchpoint that triggered.
+ Otherwise return zero. */
+
+int
+x86_dr_stopped_by_watchpoint (struct x86_debug_reg_state *state)
+{
+ CORE_ADDR addr = 0;
+ return x86_dr_stopped_data_address (state, &addr);
+}
--- /dev/null
+/* Debug register code for x86 (i386 and x86-64).
+
+ Copyright (C) 2009-2014 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+/* Support for hardware watchpoints and breakpoints using the x86
+ debug registers.
+
+ This provides several functions for inserting and removing
+ hardware-assisted breakpoints and watchpoints, testing if one or
+ more of the watchpoints triggered and at what address, checking
+ whether a given region can be watched, etc.
+
+ The functions below implement debug registers sharing by reference
+ counts, and allow to watch regions up to 16 bytes long
+ (32 bytes on 64 bit hosts). */
+
+#ifndef X86_DREGS_H
+#define X86_DREGS_H 1
+
+/* Forward declaration. */
+enum target_hw_bp_type;
+
+/* Low-level function vector. */
+
+struct x86_dr_low_type
+ {
+ /* Set the debug control (DR7) register to a given value for
+ all LWPs. May be NULL if the debug control register cannot
+ be set. */
+ void (*set_control) (unsigned long);
+
+ /* Put an address into one debug register for all LWPs. May
+ be NULL if debug registers cannot be set*/
+ void (*set_addr) (int, CORE_ADDR);
+
+ /* Return the address in a given debug register of the current
+ LWP. */
+ CORE_ADDR (*get_addr) (int);
+
+ /* Return the value of the debug status (DR6) register for
+ current LWP. */
+ unsigned long (*get_status) (void);
+
+ /* Return the value of the debug control (DR7) register for
+ current LWP. */
+ unsigned long (*get_control) (void);
+
+ /* Number of bytes used for debug registers (4 or 8). */
+ int debug_register_length;
+ };
+
+extern struct x86_dr_low_type x86_dr_low;
+
+/* Debug registers' indices. */
+#define DR_FIRSTADDR 0
+#define DR_LASTADDR 3
+#define DR_NADDR 4 /* The number of debug address registers. */
+#define DR_STATUS 6 /* Index of debug status register (DR6). */
+#define DR_CONTROL 7 /* Index of debug control register (DR7). */
+
+/* Global state needed to track h/w watchpoints. */
+
+struct x86_debug_reg_state
+{
+ /* Mirror the inferior's DRi registers. We keep the status and
+ control registers separated because they don't hold addresses.
+ Note that since we can change these mirrors while threads are
+ running, we never trust them to explain a cause of a trap.
+ For that, we need to peek directly in the inferior registers. */
+ CORE_ADDR dr_mirror[DR_NADDR];
+ unsigned dr_status_mirror, dr_control_mirror;
+
+ /* Reference counts for each debug register. */
+ int dr_ref_count[DR_NADDR];
+};
+
+/* A macro to loop over all debug registers. */
+#define ALL_DEBUG_REGISTERS(i) for (i = 0; i < DR_NADDR; i++)
+
+/* Insert a watchpoint to watch a memory region which starts at
+ address ADDR and whose length is LEN bytes. Watch memory accesses
+ of the type TYPE. Return 0 on success, -1 on failure. */
+extern int x86_dr_insert_watchpoint (struct x86_debug_reg_state *state,
+ enum target_hw_bp_type type,
+ CORE_ADDR addr,
+ int len);
+
+/* Remove a watchpoint that watched the memory region which starts at
+ address ADDR, whose length is LEN bytes, and for accesses of the
+ type TYPE. Return 0 on success, -1 on failure. */
+extern int x86_dr_remove_watchpoint (struct x86_debug_reg_state *state,
+ enum target_hw_bp_type type,
+ CORE_ADDR addr,
+ int len);
+
+/* Return non-zero if we can watch a memory region that starts at
+ address ADDR and whose length is LEN bytes. */
+extern int x86_dr_region_ok_for_watchpoint (struct x86_debug_reg_state *state,
+ CORE_ADDR addr, int len);
+
+/* If the inferior has some break/watchpoint that triggered, set the
+ address associated with that break/watchpoint and return true.
+ Otherwise, return false. */
+extern int x86_dr_stopped_data_address (struct x86_debug_reg_state *state,
+ CORE_ADDR *addr_p);
+
+/* Return true if the inferior has some watchpoint that triggered.
+ Otherwise return false. */
+extern int x86_dr_stopped_by_watchpoint (struct x86_debug_reg_state *state);
+
+#endif /* X86_DREGS_H */
--- /dev/null
+/*
+ * Helper cpuid.h file copied from gcc-4.8.0. Code in gdb should not
+ * include this directly, but pull in x86-cpuid.h and use that func.
+ */
+/*
+ * Copyright (C) 2007-2014 Free Software Foundation, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 3, or (at your option) any
+ * later version.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * Under Section 7 of GPL version 3, you are granted additional
+ * permissions described in the GCC Runtime Library Exception, version
+ * 3.1, as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License and
+ * a copy of the GCC Runtime Library Exception along with this program;
+ * see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
+ * <http://www.gnu.org/licenses/>.
+ */
+
+/* %ecx */
+#define bit_SSE3 (1 << 0)
+#define bit_PCLMUL (1 << 1)
+#define bit_LZCNT (1 << 5)
+#define bit_SSSE3 (1 << 9)
+#define bit_FMA (1 << 12)
+#define bit_CMPXCHG16B (1 << 13)
+#define bit_SSE4_1 (1 << 19)
+#define bit_SSE4_2 (1 << 20)
+#define bit_MOVBE (1 << 22)
+#define bit_POPCNT (1 << 23)
+#define bit_AES (1 << 25)
+#define bit_XSAVE (1 << 26)
+#define bit_OSXSAVE (1 << 27)
+#define bit_AVX (1 << 28)
+#define bit_F16C (1 << 29)
+#define bit_RDRND (1 << 30)
+
+/* %edx */
+#define bit_CMPXCHG8B (1 << 8)
+#define bit_CMOV (1 << 15)
+#define bit_MMX (1 << 23)
+#define bit_FXSAVE (1 << 24)
+#define bit_SSE (1 << 25)
+#define bit_SSE2 (1 << 26)
+
+/* Extended Features */
+/* %ecx */
+#define bit_LAHF_LM (1 << 0)
+#define bit_ABM (1 << 5)
+#define bit_SSE4a (1 << 6)
+#define bit_PRFCHW (1 << 8)
+#define bit_XOP (1 << 11)
+#define bit_LWP (1 << 15)
+#define bit_FMA4 (1 << 16)
+#define bit_TBM (1 << 21)
+
+/* %edx */
+#define bit_MMXEXT (1 << 22)
+#define bit_LM (1 << 29)
+#define bit_3DNOWP (1 << 30)
+#define bit_3DNOW (1 << 31)
+
+/* Extended Features (%eax == 7) */
+#define bit_FSGSBASE (1 << 0)
+#define bit_BMI (1 << 3)
+#define bit_HLE (1 << 4)
+#define bit_AVX2 (1 << 5)
+#define bit_BMI2 (1 << 8)
+#define bit_RTM (1 << 11)
+#define bit_AVX512F (1 << 16)
+#define bit_MPX (1 << 14)
+#define bit_RDSEED (1 << 18)
+#define bit_ADX (1 << 19)
+#define bit_AVX512PF (1 << 26)
+#define bit_AVX512ER (1 << 27)
+#define bit_AVX512CD (1 << 28)
+#define bit_SHA (1 << 29)
+
+/* Extended State Enumeration Sub-leaf (%eax == 13, %ecx == 1) */
+#define bit_XSAVEOPT (1 << 0)
+
+/* Signatures for different CPU implementations as returned in uses
+ of cpuid with level 0. */
+#define signature_AMD_ebx 0x68747541
+#define signature_AMD_ecx 0x444d4163
+#define signature_AMD_edx 0x69746e65
+
+#define signature_CENTAUR_ebx 0x746e6543
+#define signature_CENTAUR_ecx 0x736c7561
+#define signature_CENTAUR_edx 0x48727561
+
+#define signature_CYRIX_ebx 0x69727943
+#define signature_CYRIX_ecx 0x64616574
+#define signature_CYRIX_edx 0x736e4978
+
+#define signature_INTEL_ebx 0x756e6547
+#define signature_INTEL_ecx 0x6c65746e
+#define signature_INTEL_edx 0x49656e69
+
+#define signature_TM1_ebx 0x6e617254
+#define signature_TM1_ecx 0x55504361
+#define signature_TM1_edx 0x74656d73
+
+#define signature_TM2_ebx 0x756e6547
+#define signature_TM2_ecx 0x3638784d
+#define signature_TM2_edx 0x54656e69
+
+#define signature_NSC_ebx 0x646f6547
+#define signature_NSC_ecx 0x43534e20
+#define signature_NSC_edx 0x79622065
+
+#define signature_NEXGEN_ebx 0x4778654e
+#define signature_NEXGEN_ecx 0x6e657669
+#define signature_NEXGEN_edx 0x72446e65
+
+#define signature_RISE_ebx 0x65736952
+#define signature_RISE_ecx 0x65736952
+#define signature_RISE_edx 0x65736952
+
+#define signature_SIS_ebx 0x20536953
+#define signature_SIS_ecx 0x20536953
+#define signature_SIS_edx 0x20536953
+
+#define signature_UMC_ebx 0x20434d55
+#define signature_UMC_ecx 0x20434d55
+#define signature_UMC_edx 0x20434d55
+
+#define signature_VIA_ebx 0x20414956
+#define signature_VIA_ecx 0x20414956
+#define signature_VIA_edx 0x20414956
+
+#define signature_VORTEX_ebx 0x74726f56
+#define signature_VORTEX_ecx 0x436f5320
+#define signature_VORTEX_edx 0x36387865
+
+#if defined(__i386__) && defined(__PIC__)
+/* %ebx may be the PIC register. */
+#if __GNUC__ >= 3
+#define __cpuid(level, a, b, c, d) \
+ __asm__ ("xchg{l}\t{%%}ebx, %k1\n\t" \
+ "cpuid\n\t" \
+ "xchg{l}\t{%%}ebx, %k1\n\t" \
+ : "=a" (a), "=&r" (b), "=c" (c), "=d" (d) \
+ : "0" (level))
+
+#define __cpuid_count(level, count, a, b, c, d) \
+ __asm__ ("xchg{l}\t{%%}ebx, %k1\n\t" \
+ "cpuid\n\t" \
+ "xchg{l}\t{%%}ebx, %k1\n\t" \
+ : "=a" (a), "=&r" (b), "=c" (c), "=d" (d) \
+ : "0" (level), "2" (count))
+#else
+/* Host GCCs older than 3.0 weren't supporting Intel asm syntax
+ nor alternatives in i386 code. */
+#define __cpuid(level, a, b, c, d) \
+ __asm__ ("xchgl\t%%ebx, %k1\n\t" \
+ "cpuid\n\t" \
+ "xchgl\t%%ebx, %k1\n\t" \
+ : "=a" (a), "=&r" (b), "=c" (c), "=d" (d) \
+ : "0" (level))
+
+#define __cpuid_count(level, count, a, b, c, d) \
+ __asm__ ("xchgl\t%%ebx, %k1\n\t" \
+ "cpuid\n\t" \
+ "xchgl\t%%ebx, %k1\n\t" \
+ : "=a" (a), "=&r" (b), "=c" (c), "=d" (d) \
+ : "0" (level), "2" (count))
+#endif
+#elif defined(__x86_64__) && (defined(__code_model_medium__) || defined(__code_model_large__)) && defined(__PIC__)
+/* %rbx may be the PIC register. */
+#define __cpuid(level, a, b, c, d) \
+ __asm__ ("xchg{q}\t{%%}rbx, %q1\n\t" \
+ "cpuid\n\t" \
+ "xchg{q}\t{%%}rbx, %q1\n\t" \
+ : "=a" (a), "=&r" (b), "=c" (c), "=d" (d) \
+ : "0" (level))
+
+#define __cpuid_count(level, count, a, b, c, d) \
+ __asm__ ("xchg{q}\t{%%}rbx, %q1\n\t" \
+ "cpuid\n\t" \
+ "xchg{q}\t{%%}rbx, %q1\n\t" \
+ : "=a" (a), "=&r" (b), "=c" (c), "=d" (d) \
+ : "0" (level), "2" (count))
+#else
+#define __cpuid(level, a, b, c, d) \
+ __asm__ ("cpuid\n\t" \
+ : "=a" (a), "=b" (b), "=c" (c), "=d" (d) \
+ : "0" (level))
+
+#define __cpuid_count(level, count, a, b, c, d) \
+ __asm__ ("cpuid\n\t" \
+ : "=a" (a), "=b" (b), "=c" (c), "=d" (d) \
+ : "0" (level), "2" (count))
+#endif
+
+/* Return highest supported input value for cpuid instruction. ext can
+ be either 0x0 or 0x8000000 to return highest supported value for
+ basic or extended cpuid information. Function returns 0 if cpuid
+ is not supported or whatever cpuid returns in eax register. If sig
+ pointer is non-null, then first four bytes of the signature
+ (as found in ebx register) are returned in location pointed by sig. */
+
+static __inline unsigned int
+__get_cpuid_max (unsigned int __ext, unsigned int *__sig)
+{
+ unsigned int __eax, __ebx, __ecx, __edx;
+
+#ifndef __x86_64__
+ /* See if we can use cpuid. On AMD64 we always can. */
+#if __GNUC__ >= 3
+ __asm__ ("pushf{l|d}\n\t"
+ "pushf{l|d}\n\t"
+ "pop{l}\t%0\n\t"
+ "mov{l}\t{%0, %1|%1, %0}\n\t"
+ "xor{l}\t{%2, %0|%0, %2}\n\t"
+ "push{l}\t%0\n\t"
+ "popf{l|d}\n\t"
+ "pushf{l|d}\n\t"
+ "pop{l}\t%0\n\t"
+ "popf{l|d}\n\t"
+ : "=&r" (__eax), "=&r" (__ebx)
+ : "i" (0x00200000));
+#else
+/* Host GCCs older than 3.0 weren't supporting Intel asm syntax
+ nor alternatives in i386 code. */
+ __asm__ ("pushfl\n\t"
+ "pushfl\n\t"
+ "popl\t%0\n\t"
+ "movl\t%0, %1\n\t"
+ "xorl\t%2, %0\n\t"
+ "pushl\t%0\n\t"
+ "popfl\n\t"
+ "pushfl\n\t"
+ "popl\t%0\n\t"
+ "popfl\n\t"
+ : "=&r" (__eax), "=&r" (__ebx)
+ : "i" (0x00200000));
+#endif
+
+ if (!((__eax ^ __ebx) & 0x00200000))
+ return 0;
+#endif
+
+ /* Host supports cpuid. Return highest supported cpuid input value. */
+ __cpuid (__ext, __eax, __ebx, __ecx, __edx);
+
+ if (__sig)
+ *__sig = __ebx;
+
+ return __eax;
+}
+
+/* Return cpuid data for requested cpuid level, as found in returned
+ eax, ebx, ecx and edx registers. The function checks if cpuid is
+ supported and returns 1 for valid cpuid information or 0 for
+ unsupported cpuid level. All pointers are required to be non-null. */
+
+static __inline int
+__get_cpuid (unsigned int __level,
+ unsigned int *__eax, unsigned int *__ebx,
+ unsigned int *__ecx, unsigned int *__edx)
+{
+ unsigned int __ext = __level & 0x80000000;
+
+ if (__get_cpuid_max (__ext, 0) < __level)
+ return 0;
+
+ __cpuid (__level, *__eax, *__ebx, *__ecx, *__edx);
+ return 1;
+}
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include <stdio.h>
-#include "nat/i386-cpuid.h"
+#include "nat/x86-cpuid.h"
typedef struct {
float f[8];
{
unsigned int eax, ebx, ecx, edx;
- if (!i386_cpuid (1, &eax, &ebx, &ecx, &edx))
+ if (!x86_cpuid (1, &eax, &ebx, &ecx, &edx))
return 0;
if ((ecx & (bit_AVX | bit_OSXSAVE)) == (bit_AVX | bit_OSXSAVE))
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
-#include "nat/i386-cpuid.h"
+#include "nat/x86-cpuid.h"
typedef struct
{
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include <stdio.h>
-#include "nat/i386-cpuid.h"
+#include "nat/x86-cpuid.h"
#ifndef NOINLINE
#define NOINLINE __attribute__ ((noinline))
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include <stdio.h>
-#include "nat/i386-cpuid.h"
+#include "nat/x86-cpuid.h"
typedef struct {
float f[4];
{
int edx;
- if (!i386_cpuid (1, NULL, NULL, NULL, &edx))
+ if (!x86_cpuid (1, NULL, NULL, NULL, &edx))
return 0;
if (edx & bit_SSE)
#include "windows-tdep.h"
#include "windows-nat.h"
-#include "i386-nat.h"
+#include "x86-nat.h"
#include "complaints.h"
#include "inf-child.h"
gdb_flush (gdb_stdout);
}
- i386_cleanup_dregs ();
+ x86_cleanup_dregs ();
inferior_ptid = null_ptid;
detach_inferior (current_event.dwProcessId);
windows_mourn_inferior (struct target_ops *ops)
{
(void) windows_continue (DBG_CONTINUE, -1, 0);
- i386_cleanup_dregs();
+ x86_cleanup_dregs();
if (open_process_used)
{
CHECK (CloseHandle (current_process_handle));
t = windows_target ();
- i386_use_watchpoints (t);
+ x86_use_watchpoints (t);
- i386_dr_low.set_control = cygwin_set_dr7;
- i386_dr_low.set_addr = cygwin_set_dr;
- i386_dr_low.get_addr = cygwin_get_dr;
- i386_dr_low.get_status = cygwin_get_dr6;
- i386_dr_low.get_control = cygwin_get_dr7;
+ x86_dr_low.set_control = cygwin_set_dr7;
+ x86_dr_low.set_addr = cygwin_set_dr;
+ x86_dr_low.get_addr = cygwin_get_dr;
+ x86_dr_low.get_status = cygwin_get_dr6;
+ x86_dr_low.get_control = cygwin_get_dr7;
- /* i386_dr_low.debug_register_length field is set by
- calling i386_set_debug_register_length function
+ /* x86_dr_low.debug_register_length field is set by
+ calling x86_set_debug_register_length function
in processor windows specific native file. */
add_target (t);
#include <sys/user.h>
#include <sys/procfs.h>
-#include "i386-nat.h"
+#include "x86-nat.h"
#include "linux-nat.h"
#ifndef __x86_64__
#include "i386-linux-nat.h"
#ifdef __x86_64__
#include "amd64-linux-tdep.h"
#endif
-#include "i386-xstate.h"
+#include "x86-xstate.h"
#include "nat/linux-btrace.h"
/* Per-thread arch-specific data we want to keep. */
if (lwp->arch_private->debug_registers_changed)
{
- struct i386_debug_reg_state *state
- = i386_debug_reg_state (ptid_get_pid (lwp->ptid));
+ struct x86_debug_reg_state *state
+ = x86_debug_reg_state (ptid_get_pid (lwp->ptid));
int i;
/* On Linux kernel before 2.6.33 commit
/* If we're setting a watchpoint, any change the inferior
had done itself to the debug registers needs to be
- discarded, otherwise, i386_stopped_data_address can get
+ discarded, otherwise, x86_stopped_data_address can get
confused. */
clear_status = 1;
}
x86_linux_new_fork (struct lwp_info *parent, pid_t child_pid)
{
pid_t parent_pid;
- struct i386_debug_reg_state *parent_state;
- struct i386_debug_reg_state *child_state;
+ struct x86_debug_reg_state *parent_state;
+ struct x86_debug_reg_state *child_state;
/* NULL means no watchpoint has ever been set in the parent. In
that case, there's nothing to do. */
this compatible with older Linux kernels too. */
parent_pid = ptid_get_pid (parent->ptid);
- parent_state = i386_debug_reg_state (parent_pid);
- child_state = i386_debug_reg_state (child_pid);
+ parent_state = x86_debug_reg_state (parent_pid);
+ child_state = x86_debug_reg_state (child_pid);
*child_state = *parent_state;
}
\f
static void
x86_linux_child_post_startup_inferior (struct target_ops *self, ptid_t ptid)
{
- i386_cleanup_dregs ();
+ x86_cleanup_dregs ();
super_post_startup_inferior (self, ptid);
}
if (have_ptrace_getregset == -1)
{
- uint64_t xstateregs[(I386_XSTATE_SSE_SIZE / sizeof (uint64_t))];
+ uint64_t xstateregs[(X86_XSTATE_SSE_SIZE / sizeof (uint64_t))];
struct iovec iov;
iov.iov_base = xstateregs;
zero so that the "no-features" descriptions are returned by the
switches below. */
if (have_ptrace_getregset)
- xcr0_features_bits = xcr0 & I386_XSTATE_ALL_MASK;
+ xcr0_features_bits = xcr0 & X86_XSTATE_ALL_MASK;
else
xcr0_features_bits = 0;
#ifdef __x86_64__
switch (xcr0_features_bits)
{
- case I386_XSTATE_MPX_AVX512_MASK:
- case I386_XSTATE_AVX512_MASK:
+ case X86_XSTATE_MPX_AVX512_MASK:
+ case X86_XSTATE_AVX512_MASK:
if (is_x32)
return tdesc_x32_avx512_linux;
else
return tdesc_amd64_avx512_linux;
- case I386_XSTATE_MPX_MASK:
+ case X86_XSTATE_MPX_MASK:
if (is_x32)
return tdesc_x32_avx_linux; /* No MPX on x32 using AVX. */
else
return tdesc_amd64_mpx_linux;
- case I386_XSTATE_AVX_MASK:
+ case X86_XSTATE_AVX_MASK:
if (is_x32)
return tdesc_x32_avx_linux;
else
{
switch (xcr0_features_bits)
{
- case I386_XSTATE_MPX_AVX512_MASK:
- case I386_XSTATE_AVX512_MASK:
+ case X86_XSTATE_MPX_AVX512_MASK:
+ case X86_XSTATE_AVX512_MASK:
return tdesc_i386_avx512_linux;
- case I386_XSTATE_MPX_MASK:
+ case X86_XSTATE_MPX_MASK:
return tdesc_i386_mpx_linux;
- case I386_XSTATE_AVX_MASK:
+ case X86_XSTATE_AVX_MASK:
return tdesc_i386_avx_linux;
default:
return tdesc_i386_linux;
struct target_ops *t = linux_target ();
/* Initialize the debug register function vectors. */
- i386_use_watchpoints (t);
- i386_dr_low.set_control = x86_linux_dr_set_control;
- i386_dr_low.set_addr = x86_linux_dr_set_addr;
- i386_dr_low.get_addr = x86_linux_dr_get_addr;
- i386_dr_low.get_status = x86_linux_dr_get_status;
- i386_dr_low.get_control = x86_linux_dr_get_control;
- i386_set_debug_register_length (sizeof (void *));
+ x86_use_watchpoints (t);
+ x86_dr_low.set_control = x86_linux_dr_set_control;
+ x86_dr_low.set_addr = x86_linux_dr_set_addr;
+ x86_dr_low.get_addr = x86_linux_dr_get_addr;
+ x86_dr_low.get_status = x86_linux_dr_get_status;
+ x86_dr_low.get_control = x86_linux_dr_get_control;
+ x86_set_debug_register_length (sizeof (void *));
/* Override the GNU/Linux inferior startup hook. */
super_post_startup_inferior = t->to_post_startup_inferior;
linux_nat_add_target (t);
linux_nat_set_new_thread (t, x86_linux_new_thread);
linux_nat_set_new_fork (t, x86_linux_new_fork);
- linux_nat_set_forget_process (t, i386_forget_process);
+ linux_nat_set_forget_process (t, x86_forget_process);
linux_nat_set_prepare_to_resume (t, x86_linux_prepare_to_resume);
}
--- /dev/null
+/* Native-dependent code for x86 (i386 and x86-64).
+
+ Copyright (C) 2001-2014 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "defs.h"
+#include "x86-nat.h"
+#include "gdbcmd.h"
+#include "inferior.h"
+
+/* Support for hardware watchpoints and breakpoints using the x86
+ debug registers.
+
+ This provides several functions for inserting and removing
+ hardware-assisted breakpoints and watchpoints, testing if one or
+ more of the watchpoints triggered and at what address, checking
+ whether a given region can be watched, etc.
+
+ The functions below implement debug registers sharing by reference
+ counts, and allow to watch regions up to 16 bytes long. */
+
+/* Whether or not to print the mirrored debug registers. */
+int debug_hw_points;
+
+/* Low-level function vector. */
+struct x86_dr_low_type x86_dr_low;
+
+/* Per-process data. We don't bind this to a per-inferior registry
+ because of targets like x86 GNU/Linux that need to keep track of
+ processes that aren't bound to any inferior (e.g., fork children,
+ checkpoints). */
+
+struct x86_process_info
+{
+ /* Linked list. */
+ struct x86_process_info *next;
+
+ /* The process identifier. */
+ pid_t pid;
+
+ /* Copy of x86 hardware debug registers. */
+ struct x86_debug_reg_state state;
+};
+
+static struct x86_process_info *x86_process_list = NULL;
+
+/* Find process data for process PID. */
+
+static struct x86_process_info *
+x86_find_process_pid (pid_t pid)
+{
+ struct x86_process_info *proc;
+
+ for (proc = x86_process_list; proc; proc = proc->next)
+ if (proc->pid == pid)
+ return proc;
+
+ return NULL;
+}
+
+/* Add process data for process PID. Returns newly allocated info
+ object. */
+
+static struct x86_process_info *
+x86_add_process (pid_t pid)
+{
+ struct x86_process_info *proc;
+
+ proc = xcalloc (1, sizeof (*proc));
+ proc->pid = pid;
+
+ proc->next = x86_process_list;
+ x86_process_list = proc;
+
+ return proc;
+}
+
+/* Get data specific info for process PID, creating it if necessary.
+ Never returns NULL. */
+
+static struct x86_process_info *
+x86_process_info_get (pid_t pid)
+{
+ struct x86_process_info *proc;
+
+ proc = x86_find_process_pid (pid);
+ if (proc == NULL)
+ proc = x86_add_process (pid);
+
+ return proc;
+}
+
+/* Get debug registers state for process PID. */
+
+struct x86_debug_reg_state *
+x86_debug_reg_state (pid_t pid)
+{
+ return &x86_process_info_get (pid)->state;
+}
+
+/* See declaration in i386-nat.h. */
+
+void
+x86_forget_process (pid_t pid)
+{
+ struct x86_process_info *proc, **proc_link;
+
+ proc = x86_process_list;
+ proc_link = &x86_process_list;
+
+ while (proc != NULL)
+ {
+ if (proc->pid == pid)
+ {
+ *proc_link = proc->next;
+
+ xfree (proc);
+ return;
+ }
+
+ proc_link = &proc->next;
+ proc = *proc_link;
+ }
+}
+
+/* Clear the reference counts and forget everything we knew about the
+ debug registers. */
+
+void
+x86_cleanup_dregs (void)
+{
+ /* Starting from scratch has the same effect. */
+ x86_forget_process (ptid_get_pid (inferior_ptid));
+}
+
+/* Insert a watchpoint to watch a memory region which starts at
+ address ADDR and whose length is LEN bytes. Watch memory accesses
+ of the type TYPE. Return 0 on success, -1 on failure. */
+
+static int
+x86_insert_watchpoint (struct target_ops *self,
+ CORE_ADDR addr, int len, int type,
+ struct expression *cond)
+{
+ struct x86_debug_reg_state *state
+ = x86_debug_reg_state (ptid_get_pid (inferior_ptid));
+
+ return x86_dr_insert_watchpoint (state, type, addr, len);
+}
+
+/* Remove a watchpoint that watched the memory region which starts at
+ address ADDR, whose length is LEN bytes, and for accesses of the
+ type TYPE. Return 0 on success, -1 on failure. */
+static int
+x86_remove_watchpoint (struct target_ops *self,
+ CORE_ADDR addr, int len, int type,
+ struct expression *cond)
+{
+ struct x86_debug_reg_state *state
+ = x86_debug_reg_state (ptid_get_pid (inferior_ptid));
+
+ return x86_dr_remove_watchpoint (state, type, addr, len);
+}
+
+/* Return non-zero if we can watch a memory region that starts at
+ address ADDR and whose length is LEN bytes. */
+
+static int
+x86_region_ok_for_watchpoint (struct target_ops *self,
+ CORE_ADDR addr, int len)
+{
+ struct x86_debug_reg_state *state
+ = x86_debug_reg_state (ptid_get_pid (inferior_ptid));
+
+ return x86_dr_region_ok_for_watchpoint (state, addr, len);
+}
+
+/* If the inferior has some break/watchpoint that triggered, set the
+ address associated with that break/watchpoint and return non-zero.
+ Otherwise, return zero. */
+
+static int
+x86_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr_p)
+{
+ struct x86_debug_reg_state *state
+ = x86_debug_reg_state (ptid_get_pid (inferior_ptid));
+
+ return x86_dr_stopped_data_address (state, addr_p);
+}
+
+/* Return non-zero if the inferior has some watchpoint that triggered.
+ Otherwise return zero. */
+
+static int
+x86_stopped_by_watchpoint (struct target_ops *ops)
+{
+ struct x86_debug_reg_state *state
+ = x86_debug_reg_state (ptid_get_pid (inferior_ptid));
+
+ return x86_dr_stopped_by_watchpoint (state);
+}
+
+/* Insert a hardware-assisted breakpoint at BP_TGT->placed_address.
+ Return 0 on success, EBUSY on failure. */
+
+static int
+x86_insert_hw_breakpoint (struct target_ops *self, struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
+{
+ struct x86_debug_reg_state *state
+ = x86_debug_reg_state (ptid_get_pid (inferior_ptid));
+
+ return x86_dr_insert_watchpoint (state, hw_execute,
+ bp_tgt->placed_address, 1) ? EBUSY : 0;
+}
+
+/* Remove a hardware-assisted breakpoint at BP_TGT->placed_address.
+ Return 0 on success, -1 on failure. */
+
+static int
+x86_remove_hw_breakpoint (struct target_ops *self, struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
+{
+ struct x86_debug_reg_state *state
+ = x86_debug_reg_state (ptid_get_pid (inferior_ptid));
+
+ return x86_dr_remove_watchpoint (state, hw_execute,
+ bp_tgt->placed_address, 1);
+}
+
+/* Returns the number of hardware watchpoints of type TYPE that we can
+ set. Value is positive if we can set CNT watchpoints, zero if
+ setting watchpoints of type TYPE is not supported, and negative if
+ CNT is more than the maximum number of watchpoints of type TYPE
+ that we can support. TYPE is one of bp_hardware_watchpoint,
+ bp_read_watchpoint, bp_write_watchpoint, or bp_hardware_breakpoint.
+ CNT is the number of such watchpoints used so far (including this
+ one). OTHERTYPE is non-zero if other types of watchpoints are
+ currently enabled.
+
+ We always return 1 here because we don't have enough information
+ about possible overlap of addresses that they want to watch. As an
+ extreme example, consider the case where all the watchpoints watch
+ the same address and the same region length: then we can handle a
+ virtually unlimited number of watchpoints, due to debug register
+ sharing implemented via reference counts in i386-nat.c. */
+
+static int
+x86_can_use_hw_breakpoint (struct target_ops *self,
+ int type, int cnt, int othertype)
+{
+ return 1;
+}
+
+static void
+add_show_debug_regs_command (void)
+{
+ /* A maintenance command to enable printing the internal DRi mirror
+ variables. */
+ add_setshow_boolean_cmd ("show-debug-regs", class_maintenance,
+ &debug_hw_points, _("\
+Set whether to show variables that mirror the x86 debug registers."), _("\
+Show whether to show variables that mirror the x86 debug registers."), _("\
+Use \"on\" to enable, \"off\" to disable.\n\
+If enabled, the debug registers values are shown when GDB inserts\n\
+or removes a hardware breakpoint or watchpoint, and when the inferior\n\
+triggers a breakpoint or watchpoint."),
+ NULL,
+ NULL,
+ &maintenance_set_cmdlist,
+ &maintenance_show_cmdlist);
+}
+
+/* There are only two global functions left. */
+
+void
+x86_use_watchpoints (struct target_ops *t)
+{
+ /* After a watchpoint trap, the PC points to the instruction after the
+ one that caused the trap. Therefore we don't need to step over it.
+ But we do need to reset the status register to avoid another trap. */
+ t->to_have_continuable_watchpoint = 1;
+
+ t->to_can_use_hw_breakpoint = x86_can_use_hw_breakpoint;
+ t->to_region_ok_for_hw_watchpoint = x86_region_ok_for_watchpoint;
+ t->to_stopped_by_watchpoint = x86_stopped_by_watchpoint;
+ t->to_stopped_data_address = x86_stopped_data_address;
+ t->to_insert_watchpoint = x86_insert_watchpoint;
+ t->to_remove_watchpoint = x86_remove_watchpoint;
+ t->to_insert_hw_breakpoint = x86_insert_hw_breakpoint;
+ t->to_remove_hw_breakpoint = x86_remove_hw_breakpoint;
+}
+
+void
+x86_set_debug_register_length (int len)
+{
+ /* This function should be called only once for each native target. */
+ gdb_assert (x86_dr_low.debug_register_length == 0);
+ gdb_assert (len == 4 || len == 8);
+ x86_dr_low.debug_register_length = len;
+ add_show_debug_regs_command ();
+}
--- /dev/null
+/* Native-dependent code for x86 (i386 and x86-64).
+
+ Low level functions to implement Oeprating System specific
+ code to manipulate x86 debug registers.
+
+ Copyright (C) 2009-2014 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#ifndef X86_NAT_H
+#define X86_NAT_H 1
+
+#include "nat/x86-dregs.h"
+
+/* Hardware-assisted breakpoints and watchpoints. */
+
+/* Add watchpoint methods to the provided target_ops.
+ Targets using x86 family debug registers for watchpoints should call
+ this. */
+struct target_ops;
+extern void x86_use_watchpoints (struct target_ops *);
+
+/* Use this function to set x86_dr_low debug_register_length field
+ rather than setting it directly to check that the length is only
+ set once. It also enables the 'maint set/show show-debug-regs'
+ command. */
+
+extern void x86_set_debug_register_length (int len);
+
+/* Use this function to reset the x86-nat.c debug register state. */
+
+extern void x86_cleanup_dregs (void);
+
+/* Return a pointer to the local mirror of the debug registers of
+ process PID. */
+
+extern struct x86_debug_reg_state *x86_debug_reg_state (pid_t pid);
+
+/* Called whenever GDB is no longer debugging process PID. It deletes
+ data structures that keep track of debug register state. */
+
+extern void x86_forget_process (pid_t pid);
+
+#endif /* X86_NAT_H */
projects / binutils-gdb.git / commitdiff