--- /dev/null
+;;- Machine description for GNU compiler
+;;- Motorola 68000 Version
+;; Copyright (C) 1987, 1988 Free Software Foundation, Inc.
+
+;; This file is part of GNU CC.
+
+;; GNU CC is free software; you can redistribute it and/or modify
+;; it under the terms of the GNU General Public License as published by
+;; the Free Software Foundation; either version 2, or (at your option)
+;; any later version.
+
+;; GNU CC is distributed in the hope that it will be useful,
+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+;; GNU General Public License for more details.
+
+;; You should have received a copy of the GNU General Public License
+;; along with GNU CC; see the file COPYING. If not, write to
+;; the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+
+;;- instruction definitions
+
+;;- @@The original PO technology requires these to be ordered by speed,
+;;- @@ so that assigner will pick the fastest.
+
+;;- See file "rtl.def" for documentation on define_insn, match_*, et. al.
+
+;;- When naming insn's (operand 0 of define_insn) be careful about using
+;;- names from other targets machine descriptions.
+
+;;- cpp macro #define NOTICE_UPDATE_CC in file tm.h handles condition code
+;;- updates for most instructions.
+
+;;- Operand classes for the register allocator:
+;;- 'a' one of the address registers can be used.
+;;- 'd' one of the data registers can be used.
+;;- 'f' one of the m68881 registers can be used
+;;- 'r' either a data or an address register can be used.
+;;- 'x' if one of the Sun FPA registers
+;;- 'y' if one of the Low Sun FPA registers (fpa0-fpa15).
+
+;;- Immediate Floating point operator constraints
+;;- 'G' a floating point constant that is *NOT* one of the standard
+;; 68881 constant values (to force calling output_move_const_double
+;; to get it from rom if it is a 68881 constant).
+;;- 'H' one of the standard FPA constant values
+;;
+;; See the functions standard_XXX_constant_p in output-m68k.c for more
+;; info.
+
+;;- Immediate integer operand constraints:
+;;- 'I' 1 .. 8
+;;- 'J' -32768 .. 32767
+;;- 'K' all integers EXCEPT -128 .. 127
+;;- 'L' -8 .. -1
+
+;;- Assembler specs:
+;;- "%." size separator ("." or "") move%.l d0,d1
+;;- "%#" immediate separator ("#" or "") move%.l %#0,d0
+;;- "%-" push operand "sp@-" move%.l d0,%-
+;;- "%+" pop operand "sp@+" move%.l d0,%+
+;;- "%@" top of stack "sp@" move%.l d0,%@
+;;- "%!" ??? "cc" (not used)
+;;- "%$" single-precision fp specifier ("s" or "") f%$add.x fp0,fp1
+;;- "%&" double-precision fp specifier ("d" or "") f%&add.x fp0,fp1
+
+;;- Information about 68040 port.
+
+;;- The 68040 executes all 68030 and 68881/2 instructions, but some must
+;;- be emulated in software by the OS. It is faster to avoid these
+;;- instructions and issue a library call rather than trapping into
+;;- the kernel. The affected instructions are fintrz and fscale. The
+;;- TARGET_68040 flag turns the use of the opcodes off.
+
+;;- The '040 also implements a set of new floating-point instructions
+;;- which specify the rounding precision in the opcode. This finally
+;;- permit the 68k series to be truly IEEE compliant, and solves all
+;;- issues of excess precision accumulating in the extended registers.
+;;- By default, GCC does not use these instructions, since such code will
+;;- not run on an '030. To use these instructions, use the -m68040-only
+;;- switch. By changing TARGET_DEFAULT to include TARGET_68040_ONLY,
+;;- you can make these instructions the default.
+
+;;- These new instructions aren't directly in the md. They are brought
+;;- into play by defining "%$" and "%&" to expand to "s" and "d" rather
+;;- than "".
+
+
+;;- FPA port explanation:
+
+;;- Usage of the Sun FPA and the 68881 together
+
+;;- The current port of gcc to the sun fpa disallows use of the m68881
+;;- instructions completely if code is targeted for the fpa. This is
+;;- for the following reasons:
+
+;;- 1) Expressing the preference hierarchy (ie. use the fpa if you
+;;- can, the 68881 otherwise, and data registers only if you are
+;;- forced to it) is a bitch with the current constraint scheme,
+;;- especially since it would have to work for any combination of
+;;- -mfpa, -m68881.
+
+;;- 2) There are no instructions to move between the two types of
+;;- registers; the stack must be used as an intermediary.
+
+;;- It could indeed be done; I think the best way would be to have
+;;- separate patterns for TARGET_FPA (which implies a 68881),
+;;- TARGET_68881, and no floating point co-processor. Use
+;;- define_expands for all of the named instruction patterns, and
+;;- include code in the FPA instruction to deal with the 68881 with
+;;- preferences specifically set to favor the fpa. Some of this has
+;;- already been done:
+;;-
+;;- 1) Separation of most of the patterns out into a TARGET_FPA
+;;- case and a TARGET_68881 case (the exceptions are the patterns
+;;- which would need one define_expand and three define_insn's under
+;;- it (with a lot of duplicate code between them) to replace the
+;;- current single define_insn. These are mov{[ds]f,[ds]i} and the
+;;- first two patterns in the md.
+;;-
+;;- Some would still have to be done:
+;;-
+;;- 1) Add code to the fpa patterns which correspond to 68881
+;;- patterns to deal with the 68881 case (including preferences!).
+;;- What you might actually do here is combine the fpa and 68881 code
+;;- back together into one pattern for those instructions where it's
+;;- absolutely necessary and save yourself some duplicate code. I'm
+;;- not completely sure as to whether you could get away with doing
+;;- this only for the mov* insns, or if you'd have to do it for all
+;;- named insns.
+;;- 2) Add code to the mov{[ds]f,[ds]i} instructions to handle
+;;- moving between fpa regs and 68881 regs.
+
+;;- Since the fpa is more powerful than the 68881 and also has more
+;;- registers, and since I think the resultant md would be medium ugly
+;;- (lot's of duplicate code, ugly constraint strings), I elected not
+;;- to do this change.
+
+;;- Another reason why someone *might* want to do the change is to
+;;- control which register classes are accessed in a slightly cleaner
+;;- way than I have. See the blurb on CONDITIONAL_REGISTER_USAGE in
+;;- the internals manual.
+
+;;- Yet another reason why someone might want to do this change is to
+;;- allow use of some of the 68881 insns which have no equivalent on
+;;- the fpa. The sqrt instruction comes fairly quickly to mind.
+
+;;- If this is ever done, don't forget to change sun3.h so that
+;;- it *will* define __HAVE_68881__ when the FPA is in use.
+
+;;- Condition code hack
+
+;;- When a floating point compare is done in the fpa, the resulting
+;;- condition codes are left in the fpastatus register. The values in
+;;- this register must be moved into the 68000 cc register before any
+;;- jump is executed. Once this has been done, regular jump
+;;- instructions are fine (ie. floating point jumps are not necessary.
+;;- They are only done if the cc is in the 68881).
+
+;;- The instructions that move the fpastatus register to the 68000
+;;- register clobber a data register (the move cannot be done direct).
+;;- These instructions might be bundled either with the compare
+;;- instruction, or the branch instruction. If we were using both the
+;;- fpa and the 68881 together, we would wish to only mark the
+;;- register clobbered if we were doing the compare in the fpa, but I
+;;- think that that decision (whether to clobber the register or not)
+;;- must be done before register allocation (makes sense) and hence we
+;;- can't know if the floating point compare will be done in the fpa
+;;- or the fp. So whenever we are asked for code that uses the fpa,
+;;- we will mark a data register as clobbered. This is reasonable, as
+;;- almost all floating point compare operations done with fpa code
+;;- enabled will be done in the fpa. It's even more reasonable since
+;;- we decided to make the 68881 and the fpa mutually exclusive.
+
+;;- We place to code to move the fpastatus register inside of a
+;;- define_expand so that we can do it conditionally based on whether
+;;- we are targeting an fpa or not.
+
+;;- This still leaves us with the question of where we wish to put the
+;;- code to move the fpastatus reg. If we put it in the compare
+;;- instruction, we can restrict the clobbering of the register to
+;;- floating point compares, but we can't take advantage of floating
+;;- point subtracts & etc. that alter the fpastatus register. If we
+;;- put it in the branch instruction, all branches compiled with fpa
+;;- code enabled will clobber a data register, but we will be able to
+;;- take advantage of fpa subtracts. This balance favors putting the
+;;- code in with the compare instruction.
+
+;;- Note that if some enterprising hacker should decide to switch
+;;- this, he'll need to modify the code in NOTICE_UPDATE_CC.
+
+;;- Usage of the top 16 fpa registers
+
+;;- The only locations which we may transfer fpa registers 16-31 from
+;;- or to are the fpa registers 0-15. (68000 registers and memory
+;;- locations are impossible). This causes problems in gcc, which
+;;- assumes that mov?? instructions require no additional registers
+;;- (see section 11.7) and since floating point moves *must* be
+;;- supported into general registers (see section 12.3 under
+;;- HARD_REGNO_OK_FOR_MODE_P) from anywhere.
+
+;;- My solution was to reserve fpa0 for moves into or out of these top
+;;- 16 registers and to disparage the choice to reload into or out of
+;;- these registers as much as I could. That alternative is always
+;;- last in the list, so it will not be used unless all else fails. I
+;;- will note that according to my current information, sun's compiler
+;;- doesn't use these top 16 registers at all.
+
+;;- There is another possible way to do it. I *believe* that if you
+;;- make absolutely sure that the code will not be executed in the
+;;- reload pass, you can support the mov?? names with define_expands
+;;- which require new registers. This may be possible by the
+;;- appropriate juggling of constraints. I may come back to this later.
+
+;;- Usage of constant RAM
+
+;;- This has been handled correctly (I believe) but the way I've done
+;;- it could use a little explanation. The constant RAM can only be
+;;- accessed when the instruction is in "command register" mode.
+;;- "command register" mode means that no accessing of memory or the
+;;- 68000 registers is being done. This can be expressed easily in
+;;- constraints, so generally the mode of the instruction is
+;;- determined by a branch off of which_alternative. In outputing
+;;- instructions, a 'w' means to output an access to the constant ram
+;;- (if the arg is CONST_DOUBLE and is one of the available
+;;- constants), and 'x' means to output a register pair (if the arg is
+;;- a 68000 register) and a 'y' is the combination of the above two
+;;- processes. You use a 'y' in two operand DF instructions where you
+;;- *know* the other operand is an fpa register, you use an 'x' in DF
+;;- instructions where the arg might be a 68000 register and the
+;;- instruction is *not* in "command register" mode, and you use a 'w'
+;;- in two situations: 1) The instruction *is* in command register
+;;- mode (and hence won't be accessing 68000 registers), or 2) The
+;;- instruction is a two operand SF instruction where you know the
+;;- other operand is an fpa register.
+
+;;- Optimization issues
+
+;;- I actually think that I've included all of the fpa instructions
+;;- that should be included. Note that if someone is interested in
+;;- doing serious floating point work on the sun fpa, I would advise
+;;- the use of the "asm" instruction in gcc to allow you to use the
+;;- sin, cos, and exponential functions on the fpa board.
+
+;;- END FPA Explanation Section.
+
+
+;;- Some of these insn's are composites of several m68000 op codes.
+;;- The assembler (or final @@??) insures that the appropriate one is
+;;- selected.
+\f
+(define_insn ""
+ [(set (match_operand:DF 0 "push_operand" "=m")
+ (match_operand:DF 1 "general_operand" "ro<>fyE"))]
+ ""
+ "*
+{
+ if (FP_REG_P (operands[1]))
+ return \"fmove%.d %f1,%0\";
+ if (FPA_REG_P (operands[1]))
+ return \"fpmove%.d %1, %x0\";
+ return output_move_double (operands);
+}")
+
+(define_insn ""
+ [(set (match_operand:DI 0 "push_operand" "=m")
+ (match_operand:DI 1 "general_operand" "ro<>Fy"))]
+ ""
+ "*
+{
+ return output_move_double (operands);
+}")
+\f
+;; We don't want to allow a constant operand for test insns because
+;; (set (cc0) (const_int foo)) has no mode information. Such insns will
+;; be folded while optimizing anyway.
+(define_insn "tstsi"
+ [(set (cc0)
+ (match_operand:SI 0 "nonimmediate_operand" "rm"))]
+ ""
+ "*
+{
+#ifdef ISI_OV
+ /* ISI's assembler fails to handle tstl a0. */
+ if (! ADDRESS_REG_P (operands[0]))
+#else
+ if (TARGET_68020 || ! ADDRESS_REG_P (operands[0]))
+#endif
+ return \"tst%.l %0\";
+ /* If you think that the 68020 does not support tstl a0,
+ reread page B-167 of the 68020 manual more carefully. */
+ /* On an address reg, cmpw may replace cmpl. */
+#ifdef SGS_CMP_ORDER
+ return \"cmp%.w %0,%#0\";
+#else
+ return \"cmp%.w %#0,%0\";
+#endif
+}")
+
+;; This can't use an address register, because comparisons
+;; with address registers as second operand always test the whole word.
+(define_insn "tsthi"
+ [(set (cc0)
+ (match_operand:HI 0 "nonimmediate_operand" "dm"))]
+ ""
+ "tst%.w %0")
+
+(define_insn "tstqi"
+ [(set (cc0)
+ (match_operand:QI 0 "nonimmediate_operand" "dm"))]
+ ""
+ "tst%.b %0")
+
+(define_expand "tstsf"
+ [(set (cc0)
+ (match_operand:SF 0 "general_operand" ""))]
+ "TARGET_68881 || TARGET_FPA"
+ "
+{
+ if (TARGET_FPA)
+ {
+ emit_insn (gen_tstsf_fpa (operands[0]));
+ DONE;
+ }
+}")
+
+(define_insn "tstsf_fpa"
+ [(set (cc0)
+ (match_operand:SF 0 "general_operand" "xmdF"))
+ (clobber (match_scratch:SI 1 "=d"))]
+ "TARGET_FPA"
+ "fptst%.s %x0\;fpmove fpastatus,%1\;movw %1,cc")
+
+(define_insn ""
+ [(set (cc0)
+ (match_operand:SF 0 "general_operand" "fdm"))]
+ "TARGET_68881"
+ "*
+{
+ cc_status.flags = CC_IN_68881;
+ if (FP_REG_P (operands[0]))
+ return \"ftst%.x %0\";
+ return \"ftst%.s %0\";
+}")
+
+(define_expand "tstdf"
+ [(set (cc0)
+ (match_operand:DF 0 "general_operand" ""))]
+ "TARGET_68881 || TARGET_FPA"
+ "
+{
+ if (TARGET_FPA)
+ {
+ emit_insn (gen_tstsf_fpa (operands[0]));
+ DONE;
+ }
+}")
+
+(define_insn "tstdf_fpa"
+ [(set (cc0)
+ (match_operand:DF 0 "general_operand" "xrmF"))
+ (clobber (match_scratch:SI 1 "=d"))]
+ "TARGET_FPA"
+ "fptst%.d %x0\;fpmove fpastatus,%1\;movw %1,cc")
+
+(define_insn ""
+ [(set (cc0)
+ (match_operand:DF 0 "general_operand" "fm"))]
+ "TARGET_68881"
+ "*
+{
+ cc_status.flags = CC_IN_68881;
+ if (FP_REG_P (operands[0]))
+ return \"ftst%.x %0\";
+ return \"ftst%.d %0\";
+}")
+\f
+;; compare instructions.
+
+;; A composite of the cmp, cmpa, & cmpi m68000 op codes.
+(define_insn "cmpsi"
+ [(set (cc0)
+ (compare (match_operand:SI 0 "nonimmediate_operand" "rKs,mr,>")
+ (match_operand:SI 1 "general_operand" "mr,Ksr,>")))]
+ ""
+ "*
+{
+ if (GET_CODE (operands[0]) == MEM && GET_CODE (operands[1]) == MEM)
+ return \"cmpm%.l %1,%0\";
+ if (REG_P (operands[1])
+ || (!REG_P (operands[0]) && GET_CODE (operands[0]) != MEM))
+ { cc_status.flags |= CC_REVERSED;
+#ifdef SGS_CMP_ORDER
+ return \"cmp%.l %d1,%d0\";
+#else
+ return \"cmp%.l %d0,%d1\";
+#endif
+ }
+#ifdef SGS_CMP_ORDER
+ return \"cmp%.l %d0,%d1\";
+#else
+ return \"cmp%.l %d1,%d0\";
+#endif
+}")
+
+(define_insn "cmphi"
+ [(set (cc0)
+ (compare (match_operand:HI 0 "nonimmediate_operand" "rnm,d,n,m")
+ (match_operand:HI 1 "general_operand" "d,rnm,m,n")))]
+ ""
+ "*
+{
+ if (GET_CODE (operands[0]) == MEM && GET_CODE (operands[1]) == MEM)
+ return \"cmpm%.w %1,%0\";
+ if ((REG_P (operands[1]) && !ADDRESS_REG_P (operands[1]))
+ || (!REG_P (operands[0]) && GET_CODE (operands[0]) != MEM))
+ { cc_status.flags |= CC_REVERSED;
+#ifdef SGS_CMP_ORDER
+ return \"cmp%.w %d1,%d0\";
+#else
+ return \"cmp%.w %d0,%d1\";
+#endif
+ }
+#ifdef SGS_CMP_ORDER
+ return \"cmp%.w %d0,%d1\";
+#else
+ return \"cmp%.w %d1,%d0\";
+#endif
+}")
+
+(define_insn "cmpqi"
+ [(set (cc0)
+ (compare (match_operand:QI 0 "nonimmediate_operand" "dn,md,>")
+ (match_operand:QI 1 "general_operand" "dm,nd,>")))]
+ ""
+ "*
+{
+ if (GET_CODE (operands[0]) == MEM && GET_CODE (operands[1]) == MEM)
+ return \"cmpm%.b %1,%0\";
+ if (REG_P (operands[1])
+ || (!REG_P (operands[0]) && GET_CODE (operands[0]) != MEM))
+ { cc_status.flags |= CC_REVERSED;
+#ifdef SGS_CMP_ORDER
+ return \"cmp%.b %d1,%d0\";
+#else
+ return \"cmp%.b %d0,%d1\";
+#endif
+ }
+#ifdef SGS_CMP_ORDER
+ return \"cmp%.b %d0,%d1\";
+#else
+ return \"cmp%.b %d1,%d0\";
+#endif
+}")
+
+(define_expand "cmpdf"
+ [(set (cc0)
+ (compare (match_operand:DF 0 "general_operand" "")
+ (match_operand:DF 1 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "
+{
+ if (TARGET_FPA)
+ {
+ emit_insn (gen_cmpdf_fpa (operands[0], operands[1]));
+ DONE;
+ }
+}")
+
+(define_insn "cmpdf_fpa"
+ [(set (cc0)
+ (compare (match_operand:DF 0 "general_operand" "x,y")
+ (match_operand:DF 1 "general_operand" "xH,rmF")))
+ (clobber (match_scratch:SI 2 "=d,d"))]
+ "TARGET_FPA"
+ "fpcmp%.d %y1,%0\;fpmove fpastatus,%2\;movw %2,cc")
+
+(define_insn ""
+ [(set (cc0)
+ (compare (match_operand:DF 0 "general_operand" "f,mG")
+ (match_operand:DF 1 "general_operand" "fmG,f")))]
+ "TARGET_68881"
+ "*
+{
+ cc_status.flags = CC_IN_68881;
+#ifdef SGS_CMP_ORDER
+ if (REG_P (operands[0]))
+ {
+ if (REG_P (operands[1]))
+ return \"fcmp%.x %0,%1\";
+ else
+ return \"fcmp%.d %0,%f1\";
+ }
+ cc_status.flags |= CC_REVERSED;
+ return \"fcmp%.d %1,%f0\";
+#else
+ if (REG_P (operands[0]))
+ {
+ if (REG_P (operands[1]))
+ return \"fcmp%.x %1,%0\";
+ else
+ return \"fcmp%.d %f1,%0\";
+ }
+ cc_status.flags |= CC_REVERSED;
+ return \"fcmp%.d %f0,%1\";
+#endif
+}")
+
+(define_expand "cmpsf"
+ [(set (cc0)
+ (compare (match_operand:SF 0 "general_operand" "")
+ (match_operand:SF 1 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "
+{
+ if (TARGET_FPA)
+ {
+ emit_insn (gen_cmpsf_fpa (operands[0], operands[1]));
+ DONE;
+ }
+}")
+
+(define_insn "cmpsf_fpa"
+ [(set (cc0)
+ (compare (match_operand:SF 0 "general_operand" "x,y")
+ (match_operand:SF 1 "general_operand" "xH,rmF")))
+ (clobber (match_scratch:SI 2 "=d,d"))]
+ "TARGET_FPA"
+ "fpcmp%.s %w1,%x0\;fpmove fpastatus,%2\;movw %2,cc")
+
+(define_insn ""
+ [(set (cc0)
+ (compare (match_operand:SF 0 "general_operand" "f,mdG")
+ (match_operand:SF 1 "general_operand" "fmdG,f")))]
+ "TARGET_68881"
+ "*
+{
+ cc_status.flags = CC_IN_68881;
+#ifdef SGS_CMP_ORDER
+ if (FP_REG_P (operands[0]))
+ {
+ if (FP_REG_P (operands[1]))
+ return \"fcmp%.x %0,%1\";
+ else
+ return \"fcmp%.s %0,%f1\";
+ }
+ cc_status.flags |= CC_REVERSED;
+ return \"fcmp%.s %1,%f0\";
+#else
+ if (FP_REG_P (operands[0]))
+ {
+ if (FP_REG_P (operands[1]))
+ return \"fcmp%.x %1,%0\";
+ else
+ return \"fcmp%.s %f1,%0\";
+ }
+ cc_status.flags |= CC_REVERSED;
+ return \"fcmp%.s %f0,%1\";
+#endif
+}")
+\f
+;; Recognizers for btst instructions.
+
+(define_insn ""
+ [(set (cc0) (zero_extract (match_operand:QI 0 "nonimmediate_operand" "do")
+ (const_int 1)
+ (minus:SI (const_int 7)
+ (match_operand:SI 1 "general_operand" "di"))))]
+ ""
+ "* { return output_btst (operands, operands[1], operands[0], insn, 7); }")
+
+(define_insn ""
+ [(set (cc0) (zero_extract (match_operand:SI 0 "nonimmediate_operand" "d")
+ (const_int 1)
+ (minus:SI (const_int 31)
+ (match_operand:SI 1 "general_operand" "di"))))]
+ ""
+ "* { return output_btst (operands, operands[1], operands[0], insn, 31); }")
+
+;; The following two patterns are like the previous two
+;; except that they use the fact that bit-number operands
+;; are automatically masked to 3 or 5 bits.
+
+(define_insn ""
+ [(set (cc0) (zero_extract (match_operand:QI 0 "nonimmediate_operand" "do")
+ (const_int 1)
+ (minus:SI (const_int 7)
+ (and:SI
+ (match_operand:SI 1 "general_operand" "d")
+ (const_int 7)))))]
+ ""
+ "* { return output_btst (operands, operands[1], operands[0], insn, 7); }")
+
+(define_insn ""
+ [(set (cc0) (zero_extract (match_operand:SI 0 "nonimmediate_operand" "d")
+ (const_int 1)
+ (minus:SI (const_int 31)
+ (and:SI
+ (match_operand:SI 1 "general_operand" "d")
+ (const_int 31)))))]
+ ""
+ "* { return output_btst (operands, operands[1], operands[0], insn, 31); }")
+
+;; Nonoffsettable mem refs are ok in this one pattern
+;; since we don't try to adjust them.
+(define_insn ""
+ [(set (cc0) (zero_extract (match_operand:QI 0 "nonimmediate_operand" "md")
+ (const_int 1)
+ (match_operand:SI 1 "general_operand" "i")))]
+ "GET_CODE (operands[1]) == CONST_INT
+ && (unsigned) INTVAL (operands[1]) < 8"
+ "*
+{
+ operands[1] = gen_rtx (CONST_INT, VOIDmode, 7 - INTVAL (operands[1]));
+ return output_btst (operands, operands[1], operands[0], insn, 7);
+}")
+
+(define_insn ""
+ [(set (cc0) (zero_extract (match_operand:SI 0 "nonimmediate_operand" "do")
+ (const_int 1)
+ (match_operand:SI 1 "general_operand" "i")))]
+ "GET_CODE (operands[1]) == CONST_INT"
+ "*
+{
+ if (GET_CODE (operands[0]) == MEM)
+ {
+ operands[0] = adj_offsettable_operand (operands[0],
+ INTVAL (operands[1]) / 8);
+ operands[1] = gen_rtx (CONST_INT, VOIDmode,
+ 7 - INTVAL (operands[1]) % 8);
+ return output_btst (operands, operands[1], operands[0], insn, 7);
+ }
+ operands[1] = gen_rtx (CONST_INT, VOIDmode,
+ 31 - INTVAL (operands[1]));
+ return output_btst (operands, operands[1], operands[0], insn, 31);
+}")
+
+\f
+;; move instructions
+
+;; A special case in which it is not desirable
+;; to reload the constant into a data register.
+(define_insn ""
+ [(set (match_operand:SI 0 "push_operand" "=m")
+ (match_operand:SI 1 "general_operand" "J"))]
+ "GET_CODE (operands[1]) == CONST_INT
+ && INTVAL (operands[1]) >= -0x8000
+ && INTVAL (operands[1]) < 0x8000"
+ "*
+{
+ if (operands[1] == const0_rtx)
+ return \"clr%.l %0\";
+ return \"pea %a1\";
+}")
+
+;This is never used.
+;(define_insn "swapsi"
+; [(set (match_operand:SI 0 "general_operand" "r")
+; (match_operand:SI 1 "general_operand" "r"))
+; (set (match_dup 1) (match_dup 0))]
+; ""
+; "exg %1,%0")
+
+;; Special case of fullword move when source is zero.
+;; The reason this is special is to avoid loading a zero
+;; into a data reg with moveq in order to store it elsewhere.
+
+(define_insn ""
+ [(set (match_operand:SI 0 "general_operand" "=g")
+ (const_int 0))]
+ ;; clr insns on 68000 read before writing.
+ ;; This isn't so on the 68010, but we have no alternative for it.
+ "(TARGET_68020
+ || !(GET_CODE (operands[0]) == MEM && MEM_VOLATILE_P (operands[0])))"
+ "*
+{
+ if (ADDRESS_REG_P (operands[0]))
+ return \"sub%.l %0,%0\";
+ /* moveq is faster on the 68000. */
+ if (DATA_REG_P (operands[0]) && !TARGET_68020)
+#if defined(MOTOROLA) && !defined(CRDS)
+ return \"moveq%.l %#0,%0\";
+#else
+ return \"moveq %#0,%0\";
+#endif
+ return \"clr%.l %0\";
+}")
+
+;; General case of fullword move.
+;;
+;; This is the main "hook" for PIC code. When generating
+;; PIC, movsi is responsible for determining when the source address
+;; needs PIC relocation and appropriatly calling legitimize_pic_address
+;; to perform the actual relocation.
+;;
+;; In both the PIC and non-PIC cases the patterns generated will
+;; matched by the next define_insn.
+(define_expand "movsi"
+ [(set (match_operand:SI 0 "general_operand" "")
+ (match_operand:SI 1 "general_operand" ""))]
+ ""
+ "
+{
+ if (flag_pic && symbolic_operand (operands[1], SImode))
+ {
+ /* The source is an address which requires PIC relocation.
+ Call legitimize_pic_address with the source, mode, and a relocation
+ register (a new pseudo, or the final destination if reload_in_progress
+ is set). Then fall through normally */
+ extern rtx legitimize_pic_address();
+ rtx temp = reload_in_progress ? operands[0] : gen_reg_rtx (Pmode);
+ operands[1] = legitimize_pic_address (operands[1], SImode, temp);
+ }
+}")
+
+;; General case of fullword move. The register constraints
+;; force integer constants in range for a moveq to be reloaded
+;; if they are headed for memory.
+(define_insn ""
+ ;; Notes: make sure no alternative allows g vs g.
+ ;; We don't allow f-regs since fixed point cannot go in them.
+ ;; We do allow y and x regs since fixed point is allowed in them.
+ [(set (match_operand:SI 0 "general_operand" "=g,da,y,!*x*r*m")
+ (match_operand:SI 1 "general_operand" "daymKs,i,g,*x*r*m"))]
+ ""
+ "*
+{
+ if (which_alternative == 3)
+ return \"fpmove%.l %x1,fpa0\;fpmove%.l fpa0,%x0\";
+ if (FPA_REG_P (operands[1]) || FPA_REG_P (operands[0]))
+ return \"fpmove%.l %x1,%x0\";
+ if (GET_CODE (operands[1]) == CONST_INT)
+ {
+ if (operands[1] == const0_rtx
+ && (DATA_REG_P (operands[0])
+ || GET_CODE (operands[0]) == MEM)
+ /* clr insns on 68000 read before writing.
+ This isn't so on the 68010, but we have no alternative for it. */
+ && (TARGET_68020
+ || !(GET_CODE (operands[0]) == MEM
+ && MEM_VOLATILE_P (operands[0]))))
+ return \"clr%.l %0\";
+ else if (DATA_REG_P (operands[0])
+ && INTVAL (operands[1]) < 128
+ && INTVAL (operands[1]) >= -128)
+ {
+#if defined(MOTOROLA) && !defined(CRDS)
+ return \"moveq%.l %1,%0\";
+#else
+ return \"moveq %1,%0\";
+#endif
+ }
+#ifndef NO_ADDSUB_Q
+ else if (DATA_REG_P (operands[0])
+ /* Do this with a moveq #N-8, dreg; addq #8,dreg */
+ && INTVAL (operands[1]) < 136
+ && INTVAL (operands[1]) >= 128)
+ {
+ operands[1] = gen_rtx (CONST_INT, VOIDmode, INTVAL (operands[1]) - 8);
+#if defined(MOTOROLA) && !defined(CRDS)
+ return \"moveq%.l %1,%0;addq%.w %#8,%0\";
+#else
+ return \"moveq %1,%0;addq%.w %#8,%0\";
+#endif
+ }
+ else if (DATA_REG_P (operands[0])
+ /* Do this with a moveq #N+8, dreg; subq #8,dreg */
+ && INTVAL (operands[1]) < -128
+ && INTVAL (operands[1]) >= -136)
+ {
+ operands[1] = gen_rtx (CONST_INT, VOIDmode, INTVAL (operands[1]) + 8);
+#if defined(MOTOROLA) && !defined(CRDS)
+ return \"moveq%.l %1,%0;subq%.w %#8,%0\";
+#else
+ return \"moveq %1,%0;subq%.w %#8,%0\";
+#endif
+ }
+#endif
+ else if (DATA_REG_P (operands[0])
+ /* If N is in the right range and is even, then use
+ moveq #N/2, dreg; addl dreg,dreg */
+ && INTVAL (operands[1]) > 127
+ && INTVAL (operands[1]) <= 254
+ && INTVAL (operands[1]) % 2 == 0)
+ {
+ operands[1] = gen_rtx (CONST_INT, VOIDmode, INTVAL (operands[1]) / 2);
+#if defined(MOTOROLA) && !defined(CRDS)
+ return \"moveq%.l %1,%0;add%.w %0,%0\";
+#else
+ return \"moveq %1,%0;add%.w %0,%0\";
+#endif
+ }
+ else if (ADDRESS_REG_P (operands[0])
+ && INTVAL (operands[1]) < 0x8000
+ && INTVAL (operands[1]) >= -0x8000)
+ return \"move%.w %1,%0\";
+ else if (push_operand (operands[0], SImode)
+ && INTVAL (operands[1]) < 0x8000
+ && INTVAL (operands[1]) >= -0x8000)
+ return \"pea %a1\";
+ }
+ else if ((GET_CODE (operands[1]) == SYMBOL_REF
+ || GET_CODE (operands[1]) == CONST)
+ && push_operand (operands[0], SImode))
+ return \"pea %a1\";
+ else if ((GET_CODE (operands[1]) == SYMBOL_REF
+ || GET_CODE (operands[1]) == CONST)
+ && ADDRESS_REG_P (operands[0]))
+ return \"lea %a1,%0\";
+ return \"move%.l %1,%0\";
+}")
+
+(define_insn "movhi"
+ [(set (match_operand:HI 0 "general_operand" "=g")
+ (match_operand:HI 1 "general_operand" "g"))]
+ ""
+ "*
+{
+ if (GET_CODE (operands[1]) == CONST_INT)
+ {
+ if (operands[1] == const0_rtx
+ && (DATA_REG_P (operands[0])
+ || GET_CODE (operands[0]) == MEM)
+ /* clr insns on 68000 read before writing.
+ This isn't so on the 68010, but we have no alternative for it. */
+ && (TARGET_68020
+ || !(GET_CODE (operands[0]) == MEM
+ && MEM_VOLATILE_P (operands[0]))))
+ return \"clr%.w %0\";
+ else if (DATA_REG_P (operands[0])
+ && INTVAL (operands[1]) < 128
+ && INTVAL (operands[1]) >= -128)
+ {
+#if defined(MOTOROLA) && !defined(CRDS)
+ return \"moveq%.l %1,%0\";
+#else
+ return \"moveq %1,%0\";
+#endif
+ }
+ else if (INTVAL (operands[1]) < 0x8000
+ && INTVAL (operands[1]) >= -0x8000)
+ return \"move%.w %1,%0\";
+ }
+ else if (CONSTANT_P (operands[1]))
+ return \"move%.l %1,%0\";
+#ifndef SGS_NO_LI
+ /* Recognize the insn before a tablejump, one that refers
+ to a table of offsets. Such an insn will need to refer
+ to a label on the insn. So output one. Use the label-number
+ of the table of offsets to generate this label. */
+ if (GET_CODE (operands[1]) == MEM
+ && GET_CODE (XEXP (operands[1], 0)) == PLUS
+ && (GET_CODE (XEXP (XEXP (operands[1], 0), 0)) == LABEL_REF
+ || GET_CODE (XEXP (XEXP (operands[1], 0), 1)) == LABEL_REF)
+ && GET_CODE (XEXP (XEXP (operands[1], 0), 0)) != PLUS
+ && GET_CODE (XEXP (XEXP (operands[1], 0), 1)) != PLUS)
+ {
+ rtx labelref;
+ if (GET_CODE (XEXP (XEXP (operands[1], 0), 0)) == LABEL_REF)
+ labelref = XEXP (XEXP (operands[1], 0), 0);
+ else
+ labelref = XEXP (XEXP (operands[1], 0), 1);
+#if defined (MOTOROLA) && !defined (SGS_SWITCH_TABLES)
+#ifdef SGS
+ asm_fprintf (asm_out_file, \"\\tset %LLI%d,.+2\\n\",
+ CODE_LABEL_NUMBER (XEXP (labelref, 0)));
+#else /* not SGS */
+ asm_fprintf (asm_out_file, \"\\t.set %LLI%d,.+2\\n\",
+ CODE_LABEL_NUMBER (XEXP (labelref, 0)));
+#endif /* not SGS */
+#else /* SGS_SWITCH_TABLES or not MOTOROLA */
+ ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, \"LI\",
+ CODE_LABEL_NUMBER (XEXP (labelref, 0)));
+ /* For sake of 3b1, set flag saying we need to define the symbol
+ LD%n (with value L%n-LI%n) at the end of the switch table. */
+ RTX_INTEGRATED_P (next_real_insn (XEXP (labelref, 0))) = 1;
+#endif /* SGS_SWITCH_TABLES or not MOTOROLA */
+ }
+#endif /* SGS_NO_LI */
+ return \"move%.w %1,%0\";
+}")
+
+(define_insn "movstricthi"
+ [(set (strict_low_part (match_operand:HI 0 "general_operand" "+dm"))
+ (match_operand:HI 1 "general_operand" "rmn"))]
+ ""
+ "*
+{
+ if (GET_CODE (operands[1]) == CONST_INT)
+ {
+ if (operands[1] == const0_rtx
+ && (DATA_REG_P (operands[0])
+ || GET_CODE (operands[0]) == MEM)
+ /* clr insns on 68000 read before writing.
+ This isn't so on the 68010, but we have no alternative for it. */
+ && (TARGET_68020
+ || !(GET_CODE (operands[0]) == MEM
+ && MEM_VOLATILE_P (operands[0]))))
+ return \"clr%.w %0\";
+ }
+ return \"move%.w %1,%0\";
+}")
+
+(define_insn "movqi"
+ [(set (match_operand:QI 0 "general_operand" "=d,*a,m,m,?*a")
+ (match_operand:QI 1 "general_operand" "dmi*a,d*a,dmi,?*a,m"))]
+ ""
+ "*
+{
+ rtx xoperands[4];
+
+ /* This is probably useless, since it loses for pushing a struct
+ of several bytes a byte at a time. */
+ if (GET_CODE (operands[0]) == MEM
+ && GET_CODE (XEXP (operands[0], 0)) == PRE_DEC
+ && XEXP (XEXP (operands[0], 0), 0) == stack_pointer_rtx)
+ {
+ xoperands[1] = operands[1];
+ xoperands[2]
+ = gen_rtx (MEM, QImode,
+ gen_rtx (PLUS, VOIDmode, stack_pointer_rtx, const1_rtx));
+ xoperands[3] = stack_pointer_rtx;
+ /* Just pushing a byte puts it in the high byte of the halfword. */
+ /* We must put it in the low-order, high-numbered byte. */
+ output_asm_insn (\"subq%.w %#2,%3\;move%.b %1,%2\", xoperands);
+ return \"\";
+ }
+
+ if (ADDRESS_REG_P (operands[0]) && GET_CODE (operands[1]) == MEM)
+ {
+ xoperands[1] = operands[1];
+ xoperands[2]
+ = gen_rtx (MEM, QImode,
+ gen_rtx (PLUS, VOIDmode, stack_pointer_rtx, const1_rtx));
+ xoperands[3] = stack_pointer_rtx;
+ /* Just pushing a byte puts it in the high byte of the halfword. */
+ /* We must put it in the low half, the second byte. */
+ output_asm_insn (\"subq%.w %#2,%3\;move%.b %1,%2\", xoperands);
+ return \"move%.w %+,%0\";
+ }
+ if (ADDRESS_REG_P (operands[1]) && GET_CODE (operands[0]) == MEM)
+ {
+ xoperands[0] = operands[0];
+ xoperands[1] = operands[1];
+ xoperands[2]
+ = gen_rtx (MEM, QImode,
+ gen_rtx (PLUS, VOIDmode, stack_pointer_rtx, const1_rtx));
+ xoperands[3] = stack_pointer_rtx;
+ output_asm_insn (\"move%.w %1,%-\;move%.b %2,%0\;addq%.w %#2,%3\", xoperands);
+ return \"\";
+ }
+ /* clr and st insns on 68000 read before writing.
+ This isn't so on the 68010, but we have no alternative for it. */
+ if (TARGET_68020
+ || !(GET_CODE (operands[0]) == MEM && MEM_VOLATILE_P (operands[0])))
+ {
+ if (operands[1] == const0_rtx)
+ return \"clr%.b %0\";
+ if (GET_CODE (operands[1]) == CONST_INT
+ && INTVAL (operands[1]) == -1)
+ {
+ CC_STATUS_INIT;
+ return \"st %0\";
+ }
+ }
+ if (GET_CODE (operands[1]) != CONST_INT && CONSTANT_P (operands[1]))
+ return \"move%.l %1,%0\";
+ if (ADDRESS_REG_P (operands[0]) || ADDRESS_REG_P (operands[1]))
+ return \"move%.w %1,%0\";
+ return \"move%.b %1,%0\";
+}")
+
+(define_insn "movstrictqi"
+ [(set (strict_low_part (match_operand:QI 0 "general_operand" "+dm"))
+ (match_operand:QI 1 "general_operand" "dmn"))]
+ ""
+ "*
+{
+ if (operands[1] == const0_rtx
+ /* clr insns on 68000 read before writing.
+ This isn't so on the 68010, but we have no alternative for it. */
+ && (TARGET_68020
+ || !(GET_CODE (operands[0]) == MEM && MEM_VOLATILE_P (operands[0]))))
+ return \"clr%.b %0\";
+ return \"move%.b %1,%0\";
+}")
+
+(define_insn "movsf"
+ [(set (match_operand:SF 0 "general_operand" "=rmf,x,y,rm,!x,!rm")
+ (match_operand:SF 1 "general_operand" "rmfF,xH,rmF,y,rm,x"))]
+; [(set (match_operand:SF 0 "general_operand" "=rmf")
+; (match_operand:SF 1 "general_operand" "rmfF"))]
+ ""
+ "*
+{
+ if (which_alternative >= 4)
+ return \"fpmove%.s %1,fpa0\;fpmove%.s fpa0,%0\";
+ if (FPA_REG_P (operands[0]))
+ {
+ if (FPA_REG_P (operands[1]))
+ return \"fpmove%.s %x1,%x0\";
+ else if (GET_CODE (operands[1]) == CONST_DOUBLE)
+ return output_move_const_single (operands);
+ else if (FP_REG_P (operands[1]))
+ return \"fmove%.s %1,sp@-\;fpmove%.d sp@+, %0\";
+ return \"fpmove%.s %x1,%x0\";
+ }
+ if (FPA_REG_P (operands[1]))
+ {
+ if (FP_REG_P (operands[0]))
+ return \"fpmove%.s %x1,sp@-\;fmove%.s sp@+,%0\";
+ else
+ return \"fpmove%.s %x1,%x0\";
+ }
+ if (FP_REG_P (operands[0]))
+ {
+ if (FP_REG_P (operands[1]))
+ return \"f%$move%.x %1,%0\";
+ else if (ADDRESS_REG_P (operands[1]))
+ return \"move%.l %1,%-\;f%$move%.s %+,%0\";
+ else if (GET_CODE (operands[1]) == CONST_DOUBLE)
+ return output_move_const_single (operands);
+ return \"f%$move%.s %f1,%0\";
+ }
+ if (FP_REG_P (operands[1]))
+ {
+ if (ADDRESS_REG_P (operands[0]))
+ return \"fmove%.s %1,%-\;move%.l %+,%0\";
+ return \"fmove%.s %f1,%0\";
+ }
+ return \"move%.l %1,%0\";
+}")
+
+(define_insn "movdf"
+ [(set (match_operand:DF 0 "general_operand" "=rm,&rf,&rof<>,y,rm,x,!x,!rm")
+ (match_operand:DF 1 "general_operand" "rf,m,rofE<>,rmE,y,xH,rm,x"))]
+; [(set (match_operand:DF 0 "general_operand" "=rm,&rf,&rof<>")
+; (match_operand:DF 1 "general_operand" "rf,m,rofF<>"))]
+ ""
+ "*
+{
+ if (which_alternative == 6)
+ return \"fpmove%.d %x1,fpa0\;fpmove%.d fpa0,%x0\";
+ if (FPA_REG_P (operands[0]))
+ {
+ if (GET_CODE (operands[1]) == CONST_DOUBLE)
+ return output_move_const_double (operands);
+ if (FP_REG_P (operands[1]))
+ return \"fmove%.d %1,sp@-\;fpmove%.d sp@+,%x0\";
+ return \"fpmove%.d %x1,%x0\";
+ }
+ else if (FPA_REG_P (operands[1]))
+ {
+ if (FP_REG_P(operands[0]))
+ return \"fpmove%.d %x1,sp@-\;fmoved sp@+,%0\";
+ else
+ return \"fpmove%.d %x1,%x0\";
+ }
+ if (FP_REG_P (operands[0]))
+ {
+ if (FP_REG_P (operands[1]))
+ return \"f%&move%.x %1,%0\";
+ if (REG_P (operands[1]))
+ {
+ rtx xoperands[2];
+ xoperands[1] = gen_rtx (REG, SImode, REGNO (operands[1]) + 1);
+ output_asm_insn (\"move%.l %1,%-\", xoperands);
+ output_asm_insn (\"move%.l %1,%-\", operands);
+ return \"f%&move%.d %+,%0\";
+ }
+ if (GET_CODE (operands[1]) == CONST_DOUBLE)
+ return output_move_const_double (operands);
+ return \"f%&move%.d %f1,%0\";
+ }
+ else if (FP_REG_P (operands[1]))
+ {
+ if (REG_P (operands[0]))
+ {
+ output_asm_insn (\"fmove%.d %f1,%-\;move%.l %+,%0\", operands);
+ operands[0] = gen_rtx (REG, SImode, REGNO (operands[0]) + 1);
+ return \"move%.l %+,%0\";
+ }
+ else
+ return \"fmove%.d %f1,%0\";
+ }
+ return output_move_double (operands);
+}
+")
+
+;; movdi can apply to fp regs in some cases
+(define_insn "movdi"
+ ;; Let's see if it really still needs to handle fp regs, and, if so, why.
+ [(set (match_operand:DI 0 "general_operand" "=rm,&r,&ro<>,y,rm,!*x,!rm")
+ (match_operand:DI 1 "general_operand" "rF,m,roi<>F,rmiF,y,rmF,*x"))]
+; [(set (match_operand:DI 0 "general_operand" "=rm,&r,&ro<>,!&rm,!&f,y,rm,x,!x,!rm")
+; (match_operand:DI 1 "general_operand" "r,m,roi<>,fF,rfmF,rmi,y,rm,x"))]
+; [(set (match_operand:DI 0 "general_operand" "=rm,&rf,&ro<>,!&rm,!&f")
+; (match_operand:DI 1 "general_operand" "r,m,roi<>,fF,rfF"))]
+ ""
+ "*
+{
+ if (which_alternative == 8)
+ return \"fpmove%.d %x1,fpa0\;fpmove%.d fpa0,%x0\";
+ if (FPA_REG_P (operands[0]) || FPA_REG_P (operands[1]))
+ return \"fpmove%.d %x1,%x0\";
+ if (FP_REG_P (operands[0]))
+ {
+ if (FP_REG_P (operands[1]))
+ return \"fmove%.x %1,%0\";
+ if (REG_P (operands[1]))
+ {
+ rtx xoperands[2];
+ xoperands[1] = gen_rtx (REG, SImode, REGNO (operands[1]) + 1);
+ output_asm_insn (\"move%.l %1,%-\", xoperands);
+ output_asm_insn (\"move%.l %1,%-\", operands);
+ return \"fmove%.d %+,%0\";
+ }
+ if (GET_CODE (operands[1]) == CONST_DOUBLE)
+ return output_move_const_double (operands);
+ return \"fmove%.d %f1,%0\";
+ }
+ else if (FP_REG_P (operands[1]))
+ {
+ if (REG_P (operands[0]))
+ {
+ output_asm_insn (\"fmove%.d %f1,%-\;move%.l %+,%0\", operands);
+ operands[0] = gen_rtx (REG, SImode, REGNO (operands[0]) + 1);
+ return \"move%.l %+,%0\";
+ }
+ else
+ return \"fmove%.d %f1,%0\";
+ }
+ return output_move_double (operands);
+}
+")
+
+;; Thus goes after the move instructions
+;; because the move instructions are better (require no spilling)
+;; when they can apply. It goes before the add/sub insns
+;; so we will prefer it to them.
+
+(define_insn "pushasi"
+ [(set (match_operand:SI 0 "push_operand" "=m")
+ (match_operand:SI 1 "address_operand" "p"))]
+ ""
+ "pea %a1")
+\f
+;; truncation instructions
+(define_insn "truncsiqi2"
+ [(set (match_operand:QI 0 "general_operand" "=dm,d")
+ (truncate:QI
+ (match_operand:SI 1 "general_operand" "doJ,i")))]
+ ""
+ "*
+{
+ if (GET_CODE (operands[0]) == REG)
+ {
+ /* Must clear condition codes, since the mov.l bases them on
+ the entire 32 bits, not just the desired 8 bits. */
+ CC_STATUS_INIT;
+ return \"move%.l %1,%0\";
+ }
+ if (GET_CODE (operands[1]) == MEM)
+ operands[1] = adj_offsettable_operand (operands[1], 3);
+ return \"move%.b %1,%0\";
+}")
+
+(define_insn "trunchiqi2"
+ [(set (match_operand:QI 0 "general_operand" "=dm,d")
+ (truncate:QI
+ (match_operand:HI 1 "general_operand" "doJ,i")))]
+ ""
+ "*
+{
+ if (GET_CODE (operands[0]) == REG
+ && (GET_CODE (operands[1]) == MEM
+ || GET_CODE (operands[1]) == CONST_INT))
+ {
+ /* Must clear condition codes, since the mov.w bases them on
+ the entire 16 bits, not just the desired 8 bits. */
+ CC_STATUS_INIT;
+ return \"move%.w %1,%0\";
+ }
+ if (GET_CODE (operands[0]) == REG)
+ {
+ /* Must clear condition codes, since the mov.l bases them on
+ the entire 32 bits, not just the desired 8 bits. */
+ CC_STATUS_INIT;
+ return \"move%.l %1,%0\";
+ }
+ if (GET_CODE (operands[1]) == MEM)
+ operands[1] = adj_offsettable_operand (operands[1], 1);
+ return \"move%.b %1,%0\";
+}")
+
+(define_insn "truncsihi2"
+ [(set (match_operand:HI 0 "general_operand" "=dm,d")
+ (truncate:HI
+ (match_operand:SI 1 "general_operand" "roJ,i")))]
+ ""
+ "*
+{
+ if (GET_CODE (operands[0]) == REG)
+ {
+ /* Must clear condition codes, since the mov.l bases them on
+ the entire 32 bits, not just the desired 8 bits. */
+ CC_STATUS_INIT;
+ return \"move%.l %1,%0\";
+ }
+ if (GET_CODE (operands[1]) == MEM)
+ operands[1] = adj_offsettable_operand (operands[1], 2);
+ return \"move%.w %1,%0\";
+}")
+\f
+;; zero extension instructions
+
+(define_expand "zero_extendhisi2"
+ [(set (match_operand:SI 0 "register_operand" "")
+ (const_int 0))
+ (set (strict_low_part (match_dup 2))
+ (match_operand:HI 1 "general_operand" ""))]
+ ""
+ "
+{
+ operands[1] = make_safe_from (operands[1], operands[0]);
+ if (GET_CODE (operands[0]) == SUBREG)
+ operands[2] = gen_rtx (SUBREG, HImode, SUBREG_REG (operands[0]),
+ SUBREG_WORD (operands[0]));
+ else
+ operands[2] = gen_rtx (SUBREG, HImode, operands[0], 0);
+}")
+
+(define_expand "zero_extendqihi2"
+ [(set (match_operand:HI 0 "register_operand" "")
+ (const_int 0))
+ (set (strict_low_part (match_dup 2))
+ (match_operand:QI 1 "general_operand" ""))]
+ ""
+ "
+{
+ operands[1] = make_safe_from (operands[1], operands[0]);
+ if (GET_CODE (operands[0]) == SUBREG)
+ operands[2] = gen_rtx (SUBREG, QImode, SUBREG_REG (operands[0]),
+ SUBREG_WORD (operands[0]));
+ else
+ operands[2] = gen_rtx (SUBREG, QImode, operands[0], 0);
+}")
+
+(define_expand "zero_extendqisi2"
+ [(set (match_operand:SI 0 "register_operand" "")
+ (const_int 0))
+ (set (strict_low_part (match_dup 2))
+ (match_operand:QI 1 "general_operand" ""))]
+ ""
+ "
+{
+ operands[1] = make_safe_from (operands[1], operands[0]);
+ if (GET_CODE (operands[0]) == SUBREG)
+ operands[2] = gen_rtx (SUBREG, QImode, SUBREG_REG (operands[0]),
+ SUBREG_WORD (operands[0]));
+ else
+ operands[2] = gen_rtx (SUBREG, QImode, operands[0], 0);
+}")
+\f
+;; Patterns to recognize zero-extend insns produced by the combiner.
+;; We don't allow both operands in memory, because of aliasing problems.
+
+(define_insn ""
+ [(set (match_operand:SI 0 "general_operand" "=do<>,d<")
+ (zero_extend:SI (match_operand:HI 1 "nonimmediate_operand" "rn,m")))]
+ ""
+ "*
+{
+ if (DATA_REG_P (operands[0]))
+ {
+ if (GET_CODE (operands[1]) == REG
+ && REGNO (operands[0]) == REGNO (operands[1]))
+ return \"and%.l %#0xFFFF,%0\";
+ if (reg_mentioned_p (operands[0], operands[1]))
+ return \"move%.w %1,%0\;and%.l %#0xFFFF,%0\";
+ return \"clr%.l %0\;move%.w %1,%0\";
+ }
+ else if (GET_CODE (operands[0]) == MEM
+ && GET_CODE (XEXP (operands[0], 0)) == PRE_DEC)
+ return \"move%.w %1,%0\;clr%.w %0\";
+ else if (GET_CODE (operands[0]) == MEM
+ && GET_CODE (XEXP (operands[0], 0)) == POST_INC)
+ return \"clr%.w %0\;move%.w %1,%0\";
+ else
+ {
+ output_asm_insn (\"clr%.w %0\", operands);
+ operands[0] = adj_offsettable_operand (operands[0], 2);
+ return \"move%.w %1,%0\";
+ }
+}")
+
+(define_insn ""
+ [(set (match_operand:HI 0 "general_operand" "=do<>,d")
+ (zero_extend:HI (match_operand:QI 1 "nonimmediate_operand" "dn,m")))]
+ ""
+ "*
+{
+ if (DATA_REG_P (operands[0]))
+ {
+ if (GET_CODE (operands[1]) == REG
+ && REGNO (operands[0]) == REGNO (operands[1]))
+ return \"and%.w %#0xFF,%0\";
+ if (reg_mentioned_p (operands[0], operands[1]))
+ return \"move%.b %1,%0\;and%.w %#0xFF,%0\";
+ return \"clr%.w %0\;move%.b %1,%0\";
+ }
+ else if (GET_CODE (operands[0]) == MEM
+ && GET_CODE (XEXP (operands[0], 0)) == PRE_DEC)
+ {
+ if (REGNO (XEXP (XEXP (operands[0], 0), 0))
+ == STACK_POINTER_REGNUM)
+ {
+ output_asm_insn (\"clr%.w %-\", operands);
+ operands[0] = gen_rtx (MEM, GET_MODE (operands[0]),
+ plus_constant (stack_pointer_rtx, 1));
+ return \"move%.b %1,%0\";
+ }
+ else
+ return \"move%.b %1,%0\;clr%.b %0\";
+ }
+ else if (GET_CODE (operands[0]) == MEM
+ && GET_CODE (XEXP (operands[0], 0)) == POST_INC)
+ return \"clr%.b %0\;move%.b %1,%0\";
+ else
+ {
+ output_asm_insn (\"clr%.b %0\", operands);
+ operands[0] = adj_offsettable_operand (operands[0], 1);
+ return \"move%.b %1,%0\";
+ }
+}")
+
+(define_insn ""
+ [(set (match_operand:SI 0 "general_operand" "=do<>,d")
+ (zero_extend:SI (match_operand:QI 1 "nonimmediate_operand" "dn,m")))]
+ ""
+ "*
+{
+ if (DATA_REG_P (operands[0]))
+ {
+ if (GET_CODE (operands[1]) == REG
+ && REGNO (operands[0]) == REGNO (operands[1]))
+ return \"and%.l %#0xFF,%0\";
+ if (reg_mentioned_p (operands[0], operands[1]))
+ return \"move%.b %1,%0\;and%.l %#0xFF,%0\";
+ return \"clr%.l %0\;move%.b %1,%0\";
+ }
+ else if (GET_CODE (operands[0]) == MEM
+ && GET_CODE (XEXP (operands[0], 0)) == PRE_DEC)
+ {
+ operands[0] = XEXP (XEXP (operands[0], 0), 0);
+#ifdef MOTOROLA
+#ifdef SGS
+ return \"clr%.l -(%0)\;move%.b %1,3(%0)\";
+#else
+ return \"clr%.l -(%0)\;move%.b %1,(3,%0)\";
+#endif
+#else
+ return \"clrl %0@-\;moveb %1,%0@(3)\";
+#endif
+ }
+ else if (GET_CODE (operands[0]) == MEM
+ && GET_CODE (XEXP (operands[0], 0)) == POST_INC)
+ {
+ operands[0] = XEXP (XEXP (operands[0], 0), 0);
+#ifdef MOTOROLA
+#ifdef SGS
+ return \"clr%.l (%0)+\;move%.b %1,-1(%0)\";
+#else
+ return \"clr%.l (%0)+\;move%.b %1,(-1,%0)\";
+#endif
+#else
+ return \"clrl %0@+\;moveb %1,%0@(-1)\";
+#endif
+ }
+ else
+ {
+ output_asm_insn (\"clr%.l %0\", operands);
+ operands[0] = adj_offsettable_operand (operands[0], 3);
+ return \"move%.b %1,%0\";
+ }
+}")
+\f
+;; sign extension instructions
+
+(define_insn "extendhisi2"
+ [(set (match_operand:SI 0 "general_operand" "=*d,a")
+ (sign_extend:SI
+ (match_operand:HI 1 "nonimmediate_operand" "0,rmn")))]
+ ""
+ "*
+{
+ if (ADDRESS_REG_P (operands[0]))
+ return \"move%.w %1,%0\";
+ return \"ext%.l %0\";
+}")
+
+(define_insn "extendqihi2"
+ [(set (match_operand:HI 0 "general_operand" "=d")
+ (sign_extend:HI (match_operand:QI 1 "nonimmediate_operand" "0")))]
+ ""
+ "ext%.w %0")
+
+(define_insn "extendqisi2"
+ [(set (match_operand:SI 0 "general_operand" "=d")
+ (sign_extend:SI (match_operand:QI 1 "nonimmediate_operand" "0")))]
+ "TARGET_68020"
+ "extb%.l %0")
+\f
+;; Conversions between float and double.
+
+(define_expand "extendsfdf2"
+ [(set (match_operand:DF 0 "general_operand" "")
+ (float_extend:DF
+ (match_operand:SF 1 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "general_operand" "=x,y")
+ (float_extend:DF
+ (match_operand:SF 1 "general_operand" "xH,rmF")))]
+ "TARGET_FPA"
+ "fpstod %w1,%0")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "general_operand" "=*fdm,f")
+ (float_extend:DF
+ (match_operand:SF 1 "general_operand" "f,dmF")))]
+ "TARGET_68881"
+ "*
+{
+ if (FP_REG_P (operands[0]) && FP_REG_P (operands[1]))
+ {
+ if (REGNO (operands[0]) == REGNO (operands[1]))
+ {
+ /* Extending float to double in an fp-reg is a no-op.
+ NOTICE_UPDATE_CC has already assumed that the
+ cc will be set. So cancel what it did. */
+ cc_status = cc_prev_status;
+ return \"\";
+ }
+ return \"f%&move%.x %1,%0\";
+ }
+ if (FP_REG_P (operands[0]))
+ return \"f%&move%.s %f1,%0\";
+ if (DATA_REG_P (operands[0]) && FP_REG_P (operands[1]))
+ {
+ output_asm_insn (\"fmove%.d %f1,%-\;move%.l %+,%0\", operands);
+ operands[0] = gen_rtx (REG, SImode, REGNO (operands[0]) + 1);
+ return \"move%.l %+,%0\";
+ }
+ return \"fmove%.d %f1,%0\";
+}")
+
+;; This cannot output into an f-reg because there is no way to be
+;; sure of truncating in that case.
+;; But on the Sun FPA, we can be sure.
+(define_expand "truncdfsf2"
+ [(set (match_operand:SF 0 "general_operand" "")
+ (float_truncate:SF
+ (match_operand:DF 1 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "general_operand" "=x,y")
+ (float_truncate:SF
+ (match_operand:DF 1 "general_operand" "xH,rmF")))]
+ "TARGET_FPA"
+ "fpdtos %y1,%0")
+
+;; On the '040 we can truncate in a register accurately and easily.
+(define_insn ""
+ [(set (match_operand:SF 0 "general_operand" "=f")
+ (float_truncate:SF
+ (match_operand:DF 1 "general_operand" "fmG")))]
+ "TARGET_68040_ONLY"
+ "*
+{
+ if (FP_REG_P (operands[1]))
+ return \"fsmove%.x %1,%0\";
+ return \"fsmove%.d %f1,%0\";
+}")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "general_operand" "=dm")
+ (float_truncate:SF
+ (match_operand:DF 1 "general_operand" "f")))]
+ "TARGET_68881"
+ "fmove%.s %f1,%0")
+\f
+;; Conversion between fixed point and floating point.
+;; Note that among the fix-to-float insns
+;; the ones that start with SImode come first.
+;; That is so that an operand that is a CONST_INT
+;; (and therefore lacks a specific machine mode).
+;; will be recognized as SImode (which is always valid)
+;; rather than as QImode or HImode.
+
+(define_expand "floatsisf2"
+ [(set (match_operand:SF 0 "general_operand" "")
+ (float:SF (match_operand:SI 1 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "general_operand" "=y,x")
+ (float:SF (match_operand:SI 1 "general_operand" "rmi,x")))]
+ "TARGET_FPA"
+ "fpltos %1,%0")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "general_operand" "=f")
+ (float:SF (match_operand:SI 1 "general_operand" "dmi")))]
+ "TARGET_68881"
+ "f%$move%.l %1,%0")
+
+(define_expand "floatsidf2"
+ [(set (match_operand:DF 0 "general_operand" "")
+ (float:DF (match_operand:SI 1 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "general_operand" "=y,x")
+ (float:DF (match_operand:SI 1 "general_operand" "rmi,x")))]
+ "TARGET_FPA"
+ "fpltod %1,%0")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "general_operand" "=f")
+ (float:DF (match_operand:SI 1 "general_operand" "dmi")))]
+ "TARGET_68881"
+ "f%&move%.l %1,%0")
+
+(define_insn "floathisf2"
+ [(set (match_operand:SF 0 "general_operand" "=f")
+ (float:SF (match_operand:HI 1 "general_operand" "dmn")))]
+ "TARGET_68881"
+ "f%$move%.w %1,%0")
+
+(define_insn "floathidf2"
+ [(set (match_operand:DF 0 "general_operand" "=f")
+ (float:DF (match_operand:HI 1 "general_operand" "dmn")))]
+ "TARGET_68881"
+ "fmove%.w %1,%0")
+
+(define_insn "floatqisf2"
+ [(set (match_operand:SF 0 "general_operand" "=f")
+ (float:SF (match_operand:QI 1 "general_operand" "dmn")))]
+ "TARGET_68881"
+ "fmove%.b %1,%0")
+
+(define_insn "floatqidf2"
+ [(set (match_operand:DF 0 "general_operand" "=f")
+ (float:DF (match_operand:QI 1 "general_operand" "dmn")))]
+ "TARGET_68881"
+ "f%&move%.b %1,%0")
+
+;; New routines to convert floating-point values to integers
+;; to be used on the '040. These should be faster than trapping
+;; into the kernel to emulate fintrz. They should also be faster
+;; than calling the subroutines fixsfsi() or fixdfsi().
+
+(define_insn "fix_truncdfsi2"
+ [(set (match_operand:SI 0 "general_operand" "=dm")
+ (fix:SI (fix:DF (match_operand:DF 1 "register_operand" "f"))))
+ (clobber (match_scratch:SI 2 "=d"))
+ (clobber (match_scratch:SI 3 "=d"))]
+ "TARGET_68040"
+ "*
+{
+ CC_STATUS_INIT;
+ return \"fmovem%.l fpcr,%2\;moveq #16,%3\;or%.l %2,%3\;and%.w #-33,%3\;fmovem%.l %3,fpcr\;fmove%.l %1,%0\;fmovem%.l %2,fpcr\";
+}")
+
+(define_insn "fix_truncdfhi2"
+ [(set (match_operand:HI 0 "general_operand" "=dm")
+ (fix:HI (fix:DF (match_operand:DF 1 "register_operand" "f"))))
+ (clobber (match_scratch:SI 2 "=d"))
+ (clobber (match_scratch:SI 3 "=d"))]
+ "TARGET_68040"
+ "*
+{
+ CC_STATUS_INIT;
+ return \"fmovem%.l fpcr,%2\;moveq #16,%3\;or%.l %2,%3\;and%.w #-33,%3\;fmovem%.l %3,fpcr\;fmove%.w %1,%0\;fmovem%.l %2,fpcr\";
+}")
+
+(define_insn "fix_truncdfqi2"
+ [(set (match_operand:QI 0 "general_operand" "=dm")
+ (fix:QI (fix:DF (match_operand:DF 1 "register_operand" "f"))))
+ (clobber (match_scratch:SI 2 "=d"))
+ (clobber (match_scratch:SI 3 "=d"))]
+ "TARGET_68040"
+ "*
+{
+ CC_STATUS_INIT;
+ return \"fmovem%.l fpcr,%2\;moveq #16,%3\;or%.l %2,%3\;and%.w #-33,%3\;fmovem%.l %3,fpcr\;fmove%.b %1,%0\;fmovem%.l %2,fpcr\";
+}")
+
+;; Convert a float to a float whose value is an integer.
+;; This is the first stage of converting it to an integer type.
+
+(define_insn "ftruncdf2"
+ [(set (match_operand:DF 0 "general_operand" "=f")
+ (fix:DF (match_operand:DF 1 "general_operand" "fFm")))]
+ "TARGET_68881 && !TARGET_68040"
+ "*
+{
+ if (FP_REG_P (operands[1]))
+ return \"fintrz%.x %f1,%0\";
+ return \"fintrz%.d %f1,%0\";
+}")
+
+(define_insn "ftruncsf2"
+ [(set (match_operand:SF 0 "general_operand" "=f")
+ (fix:SF (match_operand:SF 1 "general_operand" "dfFm")))]
+ "TARGET_68881 && !TARGET_68040"
+ "*
+{
+ if (FP_REG_P (operands[1]))
+ return \"fintrz%.x %f1,%0\";
+ return \"fintrz%.s %f1,%0\";
+}")
+
+;; Convert a float whose value is an integer
+;; to an actual integer. Second stage of converting float to integer type.
+(define_insn "fixsfqi2"
+ [(set (match_operand:QI 0 "general_operand" "=dm")
+ (fix:QI (match_operand:SF 1 "general_operand" "f")))]
+ "TARGET_68881"
+ "fmove%.b %1,%0")
+
+(define_insn "fixsfhi2"
+ [(set (match_operand:HI 0 "general_operand" "=dm")
+ (fix:HI (match_operand:SF 1 "general_operand" "f")))]
+ "TARGET_68881"
+ "fmove%.w %1,%0")
+
+(define_insn "fixsfsi2"
+ [(set (match_operand:SI 0 "general_operand" "=dm")
+ (fix:SI (match_operand:SF 1 "general_operand" "f")))]
+ "TARGET_68881"
+ "fmove%.l %1,%0")
+
+(define_insn "fixdfqi2"
+ [(set (match_operand:QI 0 "general_operand" "=dm")
+ (fix:QI (match_operand:DF 1 "general_operand" "f")))]
+ "TARGET_68881"
+ "fmove%.b %1,%0")
+
+(define_insn "fixdfhi2"
+ [(set (match_operand:HI 0 "general_operand" "=dm")
+ (fix:HI (match_operand:DF 1 "general_operand" "f")))]
+ "TARGET_68881"
+ "fmove%.w %1,%0")
+
+(define_insn "fixdfsi2"
+ [(set (match_operand:SI 0 "general_operand" "=dm")
+ (fix:SI (match_operand:DF 1 "general_operand" "f")))]
+ "TARGET_68881"
+ "fmove%.l %1,%0")
+
+;; Convert a float to an integer.
+;; On the Sun FPA, this is done in one step.
+
+(define_insn ""
+ [(set (match_operand:SI 0 "general_operand" "=x,y")
+ (fix:SI (fix:SF (match_operand:SF 1 "general_operand" "xH,rmF"))))]
+ "TARGET_FPA"
+ "fpstol %w1,%0")
+
+(define_insn ""
+ [(set (match_operand:SI 0 "general_operand" "=x,y")
+ (fix:SI (fix:DF (match_operand:DF 1 "general_operand" "xH,rmF"))))]
+ "TARGET_FPA"
+ "fpdtol %y1,%0")
+\f
+;; add instructions
+
+;; Note that the middle two alternatives are near-duplicates
+;; in order to handle insns generated by reload.
+;; This is needed since they are not themselves reloaded,
+;; so commutativity won't apply to them.
+(define_insn "addsi3"
+ [(set (match_operand:SI 0 "general_operand" "=m,?a,?a,r")
+ (plus:SI (match_operand:SI 1 "general_operand" "%0,a,rJK,0")
+ (match_operand:SI 2 "general_operand" "dIKLs,rJK,a,mrIKLs")))]
+ ""
+ "*
+{
+ if (! operands_match_p (operands[0], operands[1]))
+ {
+ if (!ADDRESS_REG_P (operands[1]))
+ {
+ rtx tmp = operands[1];
+
+ operands[1] = operands[2];
+ operands[2] = tmp;
+ }
+
+ /* These insns can result from reloads to access
+ stack slots over 64k from the frame pointer. */
+ if (GET_CODE (operands[2]) == CONST_INT
+ && INTVAL (operands[2]) + 0x8000 >= (unsigned) 0x10000)
+ return \"move%.l %2,%0\;add%.l %1,%0\";
+#ifdef SGS
+ if (GET_CODE (operands[2]) == REG)
+ return \"lea 0(%1,%2.l),%0\";
+ else
+ return \"lea %c2(%1),%0\";
+#else /* not SGS */
+#ifdef MOTOROLA
+ if (GET_CODE (operands[2]) == REG)
+ return \"lea (%1,%2.l),%0\";
+ else
+ return \"lea (%c2,%1),%0\";
+#else /* not MOTOROLA (MIT syntax) */
+ if (GET_CODE (operands[2]) == REG)
+ return \"lea %1@(0,%2:l),%0\";
+ else
+ return \"lea %1@(%c2),%0\";
+#endif /* not MOTOROLA */
+#endif /* not SGS */
+ }
+ if (GET_CODE (operands[2]) == CONST_INT)
+ {
+#ifndef NO_ADDSUB_Q
+ if (INTVAL (operands[2]) > 0
+ && INTVAL (operands[2]) <= 8)
+ return (ADDRESS_REG_P (operands[0])
+ ? \"addq%.w %2,%0\"
+ : \"addq%.l %2,%0\");
+ if (INTVAL (operands[2]) < 0
+ && INTVAL (operands[2]) >= -8)
+ {
+ operands[2] = gen_rtx (CONST_INT, VOIDmode,
+ - INTVAL (operands[2]));
+ return (ADDRESS_REG_P (operands[0])
+ ? \"subq%.w %2,%0\"
+ : \"subq%.l %2,%0\");
+ }
+ /* On everything except the 68000 it is faster to use two
+ addqw instuctions to add a small integer (8 < N <= 16)
+ to an address register. Likewise for subqw.*/
+ if (INTVAL (operands[2]) > 8
+ && INTVAL (operands[2]) <= 16
+ && ADDRESS_REG_P (operands[0])
+ && TARGET_68020)
+ {
+ operands[2] = gen_rtx (CONST_INT, VOIDmode, INTVAL (operands[2]) - 8);
+ return \"addq%.w %#8,%0; addq%.w %2,%0\";
+ }
+ if (INTVAL (operands[2]) < -8
+ && INTVAL (operands[2]) >= -16
+ && ADDRESS_REG_P (operands[0])
+ && TARGET_68020)
+ {
+ operands[2] = gen_rtx (CONST_INT, VOIDmode,
+ - INTVAL (operands[2]) - 8);
+ return \"subq%.w %#8,%0; subq%.w %2,%0\";
+ }
+#endif
+ if (ADDRESS_REG_P (operands[0])
+ && INTVAL (operands[2]) >= -0x8000
+ && INTVAL (operands[2]) < 0x8000)
+ return \"add%.w %2,%0\";
+ }
+ return \"add%.l %2,%0\";
+}")
+
+(define_insn ""
+ [(set (match_operand:SI 0 "general_operand" "=a")
+ (plus:SI (match_operand:SI 1 "general_operand" "0")
+ (sign_extend:SI
+ (match_operand:HI 2 "nonimmediate_operand" "rm"))))]
+ ""
+ "add%.w %2,%0")
+
+(define_insn "addhi3"
+ [(set (match_operand:HI 0 "general_operand" "=m,r")
+ (plus:HI (match_operand:HI 1 "general_operand" "%0,0")
+ (match_operand:HI 2 "general_operand" "dn,rmn")))]
+ ""
+ "*
+{
+#ifndef NO_ADDSUB_Q
+ if (GET_CODE (operands[2]) == CONST_INT)
+ {
+ if (INTVAL (operands[2]) > 0
+ && INTVAL (operands[2]) <= 8)
+ return \"addq%.w %2,%0\";
+ if (INTVAL (operands[2]) < 0
+ && INTVAL (operands[2]) >= -8)
+ {
+ operands[2] = gen_rtx (CONST_INT, VOIDmode,
+ - INTVAL (operands[2]));
+ return \"subq%.w %2,%0\";
+ }
+ /* On everything except the 68000 it is faster to use two
+ addqw instuctions to add a small integer (8 < N <= 16)
+ to an address register. Likewise for subqw. */
+ if (INTVAL (operands[2]) > 8
+ && INTVAL (operands[2]) <= 16
+ && ADDRESS_REG_P (operands[0])
+ && TARGET_68020)
+ {
+ operands[2] = gen_rtx (CONST_INT, VOIDmode, INTVAL (operands[2]) - 8);
+ return \"addq%.w %#8,%0; addq%.w %2,%0\";
+ }
+ if (INTVAL (operands[2]) < -8
+ && INTVAL (operands[2]) >= -16
+ && ADDRESS_REG_P (operands[0])
+ && TARGET_68020)
+ {
+ operands[2] = gen_rtx (CONST_INT, VOIDmode,
+ - INTVAL (operands[2]) - 8);
+ return \"subq%.w %#8,%0; subq%.w %2,%0\";
+ }
+ }
+#endif
+ return \"add%.w %2,%0\";
+}")
+
+(define_insn ""
+ [(set (strict_low_part (match_operand:HI 0 "general_operand" "+m,d"))
+ (plus:HI (match_dup 0)
+ (match_operand:HI 1 "general_operand" "dn,rmn")))]
+ ""
+ "add%.w %1,%0")
+
+(define_insn "addqi3"
+ [(set (match_operand:QI 0 "general_operand" "=m,d")
+ (plus:QI (match_operand:QI 1 "general_operand" "%0,0")
+ (match_operand:QI 2 "general_operand" "dn,dmn")))]
+ ""
+ "*
+{
+#ifndef NO_ADDSUB_Q
+ if (GET_CODE (operands[2]) == CONST_INT)
+ {
+ if (INTVAL (operands[2]) > 0
+ && INTVAL (operands[2]) <= 8)
+ return \"addq%.b %2,%0\";
+ }
+ if (GET_CODE (operands[2]) == CONST_INT)
+ {
+ if (INTVAL (operands[2]) < 0 && INTVAL (operands[2]) >= -8)
+ {
+ operands[2] = gen_rtx (CONST_INT, VOIDmode, - INTVAL (operands[2]));
+ return \"subq%.b %2,%0\";
+ }
+ }
+#endif
+ return \"add%.b %2,%0\";
+}")
+
+(define_insn ""
+ [(set (strict_low_part (match_operand:QI 0 "general_operand" "+m,d"))
+ (plus:QI (match_dup 0)
+ (match_operand:QI 1 "general_operand" "dn,dmn")))]
+ ""
+ "add%.b %1,%0")
+
+(define_expand "adddf3"
+ [(set (match_operand:DF 0 "general_operand" "")
+ (plus:DF (match_operand:DF 1 "general_operand" "")
+ (match_operand:DF 2 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "general_operand" "=x,y")
+ (plus:DF (match_operand:DF 1 "general_operand" "%xH,y")
+ (match_operand:DF 2 "general_operand" "xH,dmF")))]
+ "TARGET_FPA"
+ "*
+{
+ if (rtx_equal_p (operands[0], operands[1]))
+ return \"fpadd%.d %y2,%0\";
+ if (rtx_equal_p (operands[0], operands[2]))
+ return \"fpadd%.d %y1,%0\";
+ if (which_alternative == 0)
+ return \"fpadd3%.d %w2,%w1,%0\";
+ return \"fpadd3%.d %x2,%x1,%0\";
+}")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "general_operand" "=f")
+ (plus:DF (match_operand:DF 1 "general_operand" "%0")
+ (match_operand:DF 2 "general_operand" "fmG")))]
+ "TARGET_68881"
+ "*
+{
+ if (REG_P (operands[2]))
+ return \"f%&add%.x %2,%0\";
+ return \"f%&add%.d %f2,%0\";
+}")
+
+(define_expand "addsf3"
+ [(set (match_operand:SF 0 "general_operand" "")
+ (plus:SF (match_operand:SF 1 "general_operand" "")
+ (match_operand:SF 2 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "general_operand" "=x,y")
+ (plus:SF (match_operand:SF 1 "general_operand" "%xH,y")
+ (match_operand:SF 2 "general_operand" "xH,rmF")))]
+ "TARGET_FPA"
+ "*
+{
+ if (rtx_equal_p (operands[0], operands[1]))
+ return \"fpadd%.s %w2,%0\";
+ if (rtx_equal_p (operands[0], operands[2]))
+ return \"fpadd%.s %w1,%0\";
+ if (which_alternative == 0)
+ return \"fpadd3%.s %w2,%w1,%0\";
+ return \"fpadd3%.s %2,%1,%0\";
+}")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "general_operand" "=f")
+ (plus:SF (match_operand:SF 1 "general_operand" "%0")
+ (match_operand:SF 2 "general_operand" "fdmF")))]
+ "TARGET_68881"
+ "*
+{
+ if (REG_P (operands[2]) && ! DATA_REG_P (operands[2]))
+ return \"f%$add%.x %2,%0\";
+ return \"f%$add%.s %f2,%0\";
+}")
+\f
+;; subtract instructions
+
+(define_insn "subsi3"
+ [(set (match_operand:SI 0 "general_operand" "=m,r,!a,?d")
+ (minus:SI (match_operand:SI 1 "general_operand" "0,0,a,mrIKs")
+ (match_operand:SI 2 "general_operand" "dIKs,mrIKs,J,0")))]
+ ""
+ "*
+{
+ if (! operands_match_p (operands[0], operands[1]))
+ {
+ if (operands_match_p (operands[0], operands[2]))
+ {
+#ifndef NO_ADDSUB_Q
+ if (GET_CODE (operands[1]) == CONST_INT)
+ {
+ if (INTVAL (operands[1]) > 0
+ && INTVAL (operands[1]) <= 8)
+ return \"subq%.l %1,%0\;neg%.l %0\";
+ }
+#endif
+ return \"sub%.l %1,%0\;neg%.l %0\";
+ }
+ /* This case is matched by J, but negating -0x8000
+ in an lea would give an invalid displacement.
+ So do this specially. */
+ if (INTVAL (operands[2]) == -0x8000)
+ return \"move%.l %1,%0\;sub%.l %2,%0\";
+#ifdef SGS
+ return \"lea %n2(%1),%0\";
+#else
+#ifdef MOTOROLA
+ return \"lea (%n2,%1),%0\";
+#else /* not MOTOROLA (MIT syntax) */
+ return \"lea %1@(%n2),%0\";
+#endif /* not MOTOROLA */
+#endif /* not SGS */
+ }
+ if (GET_CODE (operands[2]) == CONST_INT)
+ {
+#ifndef NO_ADDSUB_Q
+ if (INTVAL (operands[2]) > 0
+ && INTVAL (operands[2]) <= 8)
+ return \"subq%.l %2,%0\";
+ /* Using two subqw for 8 < N <= 16 being subtracted from an
+ address register is faster on all but 68000 */
+ if (INTVAL (operands[2]) > 8
+ && INTVAL (operands[2]) <= 16
+ && ADDRESS_REG_P (operands[0])
+ && TARGET_68020)
+ {
+ operands[2] = gen_rtx (CONST_INT, VOIDmode, INTVAL (operands[2]) - 8);
+ return \"subq%.w %#8,%0; subq%.w %2,%0\";
+ }
+#endif
+ if (ADDRESS_REG_P (operands[0])
+ && INTVAL (operands[2]) >= -0x8000
+ && INTVAL (operands[2]) < 0x8000)
+ return \"sub%.w %2,%0\";
+ }
+ return \"sub%.l %2,%0\";
+}")
+
+(define_insn ""
+ [(set (match_operand:SI 0 "general_operand" "=a")
+ (minus:SI (match_operand:SI 1 "general_operand" "0")
+ (sign_extend:SI
+ (match_operand:HI 2 "nonimmediate_operand" "rmn"))))]
+ ""
+ "sub%.w %2,%0")
+
+(define_insn "subhi3"
+ [(set (match_operand:HI 0 "general_operand" "=m,r")
+ (minus:HI (match_operand:HI 1 "general_operand" "0,0")
+ (match_operand:HI 2 "general_operand" "dn,rmn")))]
+ ""
+ "sub%.w %2,%0")
+
+(define_insn ""
+ [(set (strict_low_part (match_operand:HI 0 "general_operand" "+m,d"))
+ (minus:HI (match_dup 0)
+ (match_operand:HI 1 "general_operand" "dn,rmn")))]
+ ""
+ "sub%.w %1,%0")
+
+(define_insn "subqi3"
+ [(set (match_operand:QI 0 "general_operand" "=m,d")
+ (minus:QI (match_operand:QI 1 "general_operand" "0,0")
+ (match_operand:QI 2 "general_operand" "dn,dmn")))]
+ ""
+ "sub%.b %2,%0")
+
+(define_insn ""
+ [(set (strict_low_part (match_operand:QI 0 "general_operand" "+m,d"))
+ (minus:QI (match_dup 0)
+ (match_operand:QI 1 "general_operand" "dn,dmn")))]
+ ""
+ "sub%.b %1,%0")
+
+(define_expand "subdf3"
+ [(set (match_operand:DF 0 "general_operand" "")
+ (minus:DF (match_operand:DF 1 "general_operand" "")
+ (match_operand:DF 2 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "general_operand" "=x,y,y")
+ (minus:DF (match_operand:DF 1 "general_operand" "xH,y,dmF")
+ (match_operand:DF 2 "general_operand" "xH,dmF,0")))]
+ "TARGET_FPA"
+ "*
+{
+ if (rtx_equal_p (operands[0], operands[2]))
+ return \"fprsub%.d %y1,%0\";
+ if (rtx_equal_p (operands[0], operands[1]))
+ return \"fpsub%.d %y2,%0\";
+ if (which_alternative == 0)
+ return \"fpsub3%.d %w2,%w1,%0\";
+ return \"fpsub3%.d %x2,%x1,%0\";
+}")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "general_operand" "=f")
+ (minus:DF (match_operand:DF 1 "general_operand" "0")
+ (match_operand:DF 2 "general_operand" "fmG")))]
+ "TARGET_68881"
+ "*
+{
+ if (REG_P (operands[2]))
+ return \"f%&sub%.x %2,%0\";
+ return \"f%&sub%.d %f2,%0\";
+}")
+
+(define_expand "subsf3"
+ [(set (match_operand:SF 0 "general_operand" "")
+ (minus:SF (match_operand:SF 1 "general_operand" "")
+ (match_operand:SF 2 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "general_operand" "=x,y,y")
+ (minus:SF (match_operand:SF 1 "general_operand" "xH,y,rmF")
+ (match_operand:SF 2 "general_operand" "xH,rmF,0")))]
+ "TARGET_FPA"
+ "*
+{
+ if (rtx_equal_p (operands[0], operands[2]))
+ return \"fprsub%.s %w1,%0\";
+ if (rtx_equal_p (operands[0], operands[1]))
+ return \"fpsub%.s %w2,%0\";
+ if (which_alternative == 0)
+ return \"fpsub3%.s %w2,%w1,%0\";
+ return \"fpsub3%.s %2,%1,%0\";
+}")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "general_operand" "=f")
+ (minus:SF (match_operand:SF 1 "general_operand" "0")
+ (match_operand:SF 2 "general_operand" "fdmF")))]
+ "TARGET_68881"
+ "*
+{
+ if (REG_P (operands[2]) && ! DATA_REG_P (operands[2]))
+ return \"f%$sub%.x %2,%0\";
+ return \"f%$sub%.s %f2,%0\";
+}")
+\f
+;; multiply instructions
+
+(define_insn "mulhi3"
+ [(set (match_operand:HI 0 "general_operand" "=d")
+ (mult:HI (match_operand:HI 1 "general_operand" "%0")
+ (match_operand:HI 2 "general_operand" "dmn")))]
+ ""
+ "*
+{
+#if defined(MOTOROLA) && !defined(CRDS)
+ return \"muls%.w %2,%0\";
+#else
+ return \"muls %2,%0\";
+#endif
+}")
+
+(define_insn "mulhisi3"
+ [(set (match_operand:SI 0 "general_operand" "=d")
+ (mult:SI (sign_extend:SI
+ (match_operand:HI 1 "nonimmediate_operand" "%0"))
+ (sign_extend:SI
+ (match_operand:HI 2 "nonimmediate_operand" "dmn"))))]
+ ""
+ "*
+{
+#if defined(MOTOROLA) && !defined(CRDS)
+ return \"muls%.w %2,%0\";
+#else
+ return \"muls %2,%0\";
+#endif
+}")
+
+(define_insn ""
+ [(set (match_operand:SI 0 "general_operand" "=d")
+ (mult:SI (sign_extend:SI
+ (match_operand:HI 1 "nonimmediate_operand" "%0"))
+ (match_operand:SI 2 "const_int_operand" "n")))]
+ ""
+ "*
+{
+#if defined(MOTOROLA) && !defined(CRDS)
+ return \"muls%.w %2,%0\";
+#else
+ return \"muls %2,%0\";
+#endif
+}")
+
+(define_insn "mulsi3"
+ [(set (match_operand:SI 0 "general_operand" "=d")
+ (mult:SI (match_operand:SI 1 "general_operand" "%0")
+ (match_operand:SI 2 "general_operand" "dmsK")))]
+ "TARGET_68020"
+ "muls%.l %2,%0")
+
+(define_insn "umulhisi3"
+ [(set (match_operand:SI 0 "general_operand" "=d")
+ (mult:SI (zero_extend:SI
+ (match_operand:HI 1 "nonimmediate_operand" "%0"))
+ (zero_extend:SI
+ (match_operand:HI 2 "nonimmediate_operand" "dmn"))))]
+ ""
+ "*
+{
+#if defined(MOTOROLA) && !defined(CRDS)
+ return \"mulu%.w %2,%0\";
+#else
+ return \"mulu %2,%0\";
+#endif
+}")
+
+(define_insn ""
+ [(set (match_operand:SI 0 "general_operand" "=d")
+ (mult:SI (zero_extend:SI
+ (match_operand:HI 1 "nonimmediate_operand" "%0"))
+ (match_operand:SI 2 "const_int_operand" "n")))]
+ ""
+ "*
+{
+#if defined(MOTOROLA) && !defined(CRDS)
+ return \"mulu%.w %2,%0\";
+#else
+ return \"mulu %2,%0\";
+#endif
+}")
+
+;; We need a separate DEFINE_EXPAND for u?mulsidi3 to be able to use the
+;; proper matching constraint. This is because the matching is between
+;; the high-numbered word of the DImode operand[0] and operand[1].
+(define_expand "umulsidi3"
+ [(parallel
+ [(set (subreg:SI (match_operand:DI 0 "register_operand" "") 1)
+ (subreg:SI
+ (mult:DI (zero_extend:DI
+ (match_operand:SI 1 "register_operand" ""))
+ (zero_extend:DI
+ (match_operand:SI 2 "general_operand" ""))) 1))
+ (set (subreg:SI (match_dup 0) 0)
+ (subreg:SI
+ (mult:DI (zero_extend:DI
+ (match_dup 1))
+ (zero_extend:DI
+ (match_dup 2))) 0))])]
+ "TARGET_68020"
+ "")
+
+(define_insn ""
+ [(set (match_operand:SI 0 "register_operand" "=d")
+ (subreg:SI
+ (mult:DI (zero_extend:DI
+ (match_operand:SI 1 "register_operand" "%0"))
+ (zero_extend:DI
+ (match_operand:SI 2 "general_operand" "dmsK"))) 1))
+ (set (match_operand:SI 3 "register_operand" "=d")
+ (subreg:SI
+ (mult:DI (zero_extend:DI
+ (match_dup 1))
+ (zero_extend:DI
+ (match_dup 2))) 0))]
+ "TARGET_68020"
+ "mulu%.l %2,%3:%0")
+
+(define_expand "mulsidi3"
+ [(parallel
+ [(set (subreg:SI (match_operand:DI 0 "register_operand" "") 1)
+ (subreg:SI
+ (mult:DI (sign_extend:DI
+ (match_operand:SI 1 "register_operand" ""))
+ (sign_extend:DI
+ (match_operand:SI 2 "general_operand" ""))) 1))
+ (set (subreg:SI (match_dup 0) 0)
+ (subreg:SI
+ (mult:DI (sign_extend:DI
+ (match_dup 1))
+ (sign_extend:DI
+ (match_dup 2))) 0))])]
+ "TARGET_68020"
+ "")
+
+(define_insn ""
+ [(set (match_operand:SI 0 "register_operand" "=d")
+ (subreg:SI
+ (mult:DI (sign_extend:DI
+ (match_operand:SI 1 "register_operand" "%0"))
+ (sign_extend:DI
+ (match_operand:SI 2 "general_operand" "dmKs"))) 1))
+ (set (match_operand:SI 3 "register_operand" "=d")
+ (subreg:SI
+ (mult:DI (sign_extend:DI
+ (match_dup 1))
+ (sign_extend:DI
+ (match_dup 2))) 0))]
+ "TARGET_68020"
+ "muls%.l %2,%3:%0")
+
+(define_expand "muldf3"
+ [(set (match_operand:DF 0 "general_operand" "")
+ (mult:DF (match_operand:DF 1 "general_operand" "")
+ (match_operand:DF 2 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "general_operand" "=x,y")
+ (mult:DF (match_operand:DF 1 "general_operand" "%xH,y")
+ (match_operand:DF 2 "general_operand" "xH,rmF")))]
+ "TARGET_FPA"
+ "*
+{
+ if (rtx_equal_p (operands[1], operands[2]))
+ return \"fpsqr%.d %y1,%0\";
+ if (rtx_equal_p (operands[0], operands[1]))
+ return \"fpmul%.d %y2,%0\";
+ if (rtx_equal_p (operands[0], operands[2]))
+ return \"fpmul%.d %y1,%0\";
+ if (which_alternative == 0)
+ return \"fpmul3%.d %w2,%w1,%0\";
+ return \"fpmul3%.d %x2,%x1,%0\";
+}")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "general_operand" "=f")
+ (mult:DF (match_operand:DF 1 "general_operand" "%0")
+ (match_operand:DF 2 "general_operand" "fmG")))]
+ "TARGET_68881"
+ "*
+{
+ if (GET_CODE (operands[2]) == CONST_DOUBLE
+ && floating_exact_log2 (operands[2]) && !TARGET_68040)
+ {
+ int i = floating_exact_log2 (operands[2]);
+ operands[2] = gen_rtx (CONST_INT, VOIDmode, i);
+ return \"fscale%.l %2,%0\";
+ }
+ if (REG_P (operands[2]))
+ return \"f%&mul%.x %2,%0\";
+ return \"f%&mul%.d %f2,%0\";
+}")
+
+(define_expand "mulsf3"
+ [(set (match_operand:SF 0 "general_operand" "")
+ (mult:SF (match_operand:SF 1 "general_operand" "")
+ (match_operand:SF 2 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "general_operand" "=x,y")
+ (mult:SF (match_operand:SF 1 "general_operand" "%xH,y")
+ (match_operand:SF 2 "general_operand" "xH,rmF")))]
+ "TARGET_FPA"
+ "*
+{
+ if (rtx_equal_p (operands[1], operands[2]))
+ return \"fpsqr%.s %w1,%0\";
+ if (rtx_equal_p (operands[0], operands[1]))
+ return \"fpmul%.s %w2,%0\";
+ if (rtx_equal_p (operands[0], operands[2]))
+ return \"fpmul%.s %w1,%0\";
+ if (which_alternative == 0)
+ return \"fpmul3%.s %w2,%w1,%0\";
+ return \"fpmul3%.s %2,%1,%0\";
+}")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "general_operand" "=f")
+ (mult:SF (match_operand:SF 1 "general_operand" "%0")
+ (match_operand:SF 2 "general_operand" "fdmF")))]
+ "TARGET_68881"
+ "*
+{
+ if (REG_P (operands[2]) && ! DATA_REG_P (operands[2]))
+ return (TARGET_68040_ONLY
+ ? \"fsmul%.x %2,%0\"
+ : \"fsglmul%.x %2,%0\");
+ return (TARGET_68040_ONLY
+ ? \"fsmul%.s %f2,%0\"
+ : \"fsglmul%.s %f2,%0\");
+}")
+\f
+;; divide instructions
+
+(define_insn "divhi3"
+ [(set (match_operand:HI 0 "general_operand" "=d")
+ (div:HI (match_operand:HI 1 "general_operand" "0")
+ (match_operand:HI 2 "general_operand" "dmn")))]
+ ""
+ "*
+{
+#ifdef MOTOROLA
+ return \"ext%.l %0\;divs%.w %2,%0\";
+#else
+ return \"extl %0\;divs %2,%0\";
+#endif
+}")
+
+(define_insn "divhisi3"
+ [(set (match_operand:HI 0 "general_operand" "=d")
+ (truncate:HI
+ (div:SI
+ (match_operand:SI 1 "general_operand" "0")
+ (sign_extend:SI (match_operand:HI 2 "nonimmediate_operand" "dm")))))]
+ ""
+ "*
+{
+#ifdef MOTOROLA
+ return \"divs%.w %2,%0\";
+#else
+ return \"divs %2,%0\";
+#endif
+}")
+
+(define_insn ""
+ [(set (match_operand:HI 0 "general_operand" "=d")
+ (truncate:HI (div:SI (match_operand:SI 1 "general_operand" "0")
+ (match_operand:SI 2 "const_int_operand" "n"))))]
+ ""
+ "*
+{
+#ifdef MOTOROLA
+ return \"divs%.w %2,%0\";
+#else
+ return \"divs %2,%0\";
+#endif
+}")
+
+(define_insn "udivhi3"
+ [(set (match_operand:HI 0 "general_operand" "=d")
+ (udiv:HI (match_operand:HI 1 "general_operand" "0")
+ (match_operand:HI 2 "general_operand" "dmn")))]
+ ""
+ "*
+{
+#ifdef MOTOROLA
+ return \"and%.l %#0xFFFF,%0\;divu%.w %2,%0\";
+#else
+ return \"andl %#0xFFFF,%0\;divu %2,%0\";
+#endif
+}")
+
+(define_insn "udivhisi3"
+ [(set (match_operand:HI 0 "general_operand" "=d")
+ (truncate:HI
+ (udiv:SI
+ (match_operand:SI 1 "general_operand" "0")
+ (zero_extend:SI (match_operand:HI 2 "nonimmediate_operand" "dm")))))]
+ ""
+ "*
+{
+#ifdef MOTOROLA
+ return \"divu%.w %2,%0\";
+#else
+ return \"divu %2,%0\";
+#endif
+}")
+
+(define_insn ""
+ [(set (match_operand:HI 0 "general_operand" "=d")
+ (truncate:HI (udiv:SI (match_operand:SI 1 "general_operand" "0")
+ (match_operand:SI 2 "const_int_operand" "n"))))]
+ ""
+ "*
+{
+#ifdef MOTOROLA
+ return \"divu%.w %2,%0\";
+#else
+ return \"divu %2,%0\";
+#endif
+}")
+
+(define_expand "divdf3"
+ [(set (match_operand:DF 0 "general_operand" "")
+ (div:DF (match_operand:DF 1 "general_operand" "")
+ (match_operand:DF 2 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "general_operand" "=x,y,y")
+ (div:DF (match_operand:DF 1 "general_operand" "xH,y,rmF")
+ (match_operand:DF 2 "general_operand" "xH,rmF,0")))]
+ "TARGET_FPA"
+ "*
+{
+ if (rtx_equal_p (operands[0], operands[2]))
+ return \"fprdiv%.d %y1,%0\";
+ if (rtx_equal_p (operands[0], operands[1]))
+ return \"fpdiv%.d %y2,%0\";
+ if (which_alternative == 0)
+ return \"fpdiv3%.d %w2,%w1,%0\";
+ return \"fpdiv3%.d %x2,%x1,%x0\";
+}")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "general_operand" "=f")
+ (div:DF (match_operand:DF 1 "general_operand" "0")
+ (match_operand:DF 2 "general_operand" "fmG")))]
+ "TARGET_68881"
+ "*
+{
+ if (REG_P (operands[2]))
+ return \"f%&div%.x %2,%0\";
+ return \"f%&div%.d %f2,%0\";
+}")
+
+(define_expand "divsf3"
+ [(set (match_operand:SF 0 "general_operand" "")
+ (div:SF (match_operand:SF 1 "general_operand" "")
+ (match_operand:SF 2 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "general_operand" "=x,y,y")
+ (div:SF (match_operand:SF 1 "general_operand" "xH,y,rmF")
+ (match_operand:SF 2 "general_operand" "xH,rmF,0")))]
+ "TARGET_FPA"
+ "*
+{
+ if (rtx_equal_p (operands[0], operands[1]))
+ return \"fpdiv%.s %w2,%0\";
+ if (rtx_equal_p (operands[0], operands[2]))
+ return \"fprdiv%.s %w1,%0\";
+ if (which_alternative == 0)
+ return \"fpdiv3%.s %w2,%w1,%0\";
+ return \"fpdiv3%.s %2,%1,%0\";
+}")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "general_operand" "=f")
+ (div:SF (match_operand:SF 1 "general_operand" "0")
+ (match_operand:SF 2 "general_operand" "fdmF")))]
+ "TARGET_68881"
+ "*
+{
+ if (REG_P (operands[2]) && ! DATA_REG_P (operands[2]))
+ return (TARGET_68040_ONLY
+ ? \"fsdiv%.x %2,%0\"
+ : \"fsgldiv%.x %2,%0\");
+ return (TARGET_68040_ONLY
+ ? \"fsdiv%.s %f2,%0\"
+ : \"fsgldiv%.s %f2,%0\");
+}")
+\f
+;; Remainder instructions.
+
+(define_insn "modhi3"
+ [(set (match_operand:HI 0 "general_operand" "=d")
+ (mod:HI (match_operand:HI 1 "general_operand" "0")
+ (match_operand:HI 2 "general_operand" "dmn")))]
+ ""
+ "*
+{
+ /* The swap insn produces cc's that don't correspond to the result. */
+ CC_STATUS_INIT;
+#ifdef MOTOROLA
+#ifdef SGS_SWAP_W
+ return \"ext%.l %0\;divs%.w %2,%0\;swap%.w %0\";
+#else
+ return \"ext%.l %0\;divs%.w %2,%0\;swap %0\";
+#endif
+#else
+ return \"extl %0\;divs %2,%0\;swap %0\";
+#endif
+}")
+
+(define_insn "modhisi3"
+ [(set (match_operand:HI 0 "general_operand" "=d")
+ (truncate:HI
+ (mod:SI
+ (match_operand:SI 1 "general_operand" "0")
+ (sign_extend:SI (match_operand:HI 2 "nonimmediate_operand" "dm")))))]
+ ""
+ "*
+{
+ /* The swap insn produces cc's that don't correspond to the result. */
+ CC_STATUS_INIT;
+#ifdef MOTOROLA
+#ifdef SGS_SWAP_W
+ return \"divs%.w %2,%0\;swap%.w %0\";
+#else
+ return \"divs%.w %2,%0\;swap %0\";
+#endif
+#else
+ return \"divs %2,%0\;swap %0\";
+#endif
+}")
+
+(define_insn ""
+ [(set (match_operand:HI 0 "general_operand" "=d")
+ (truncate:HI (mod:SI (match_operand:SI 1 "general_operand" "0")
+ (match_operand:SI 2 "const_int_operand" "n"))))]
+ ""
+ "*
+{
+ /* The swap insn produces cc's that don't correspond to the result. */
+ CC_STATUS_INIT;
+#ifdef MOTOROLA
+#ifdef SGS_SWAP_W
+ return \"divs%.w %2,%0\;swap%.w %0\";
+#else
+ return \"divs%.w %2,%0\;swap %0\";
+#endif
+#else
+ return \"divs %2,%0\;swap %0\";
+#endif
+}")
+
+(define_insn "umodhi3"
+ [(set (match_operand:HI 0 "general_operand" "=d")
+ (umod:HI (match_operand:HI 1 "general_operand" "0")
+ (match_operand:HI 2 "general_operand" "dmn")))]
+ ""
+ "*
+{
+ /* The swap insn produces cc's that don't correspond to the result. */
+ CC_STATUS_INIT;
+#ifdef MOTOROLA
+#ifdef SGS_SWAP_W
+ return \"and%.l %#0xFFFF,%0\;divu%.w %2,%0\;swap%.w %0\";
+#else
+ return \"and%.l %#0xFFFF,%0\;divu%.w %2,%0\;swap %0\";
+#endif
+#else
+ return \"andl %#0xFFFF,%0\;divu %2,%0\;swap %0\";
+#endif
+}")
+
+(define_insn "umodhisi3"
+ [(set (match_operand:HI 0 "general_operand" "=d")
+ (truncate:HI
+ (umod:SI
+ (match_operand:SI 1 "general_operand" "0")
+ (zero_extend:SI (match_operand:HI 2 "nonimmediate_operand" "dm")))))]
+ ""
+ "*
+{
+ /* The swap insn produces cc's that don't correspond to the result. */
+ CC_STATUS_INIT;
+#ifdef MOTOROLA
+#ifdef SGS_SWAP_W
+ return \"divu%.w %2,%0\;swap%.w %0\";
+#else
+ return \"divu%.w %2,%0\;swap %0\";
+#endif
+#else
+ return \"divu %2,%0\;swap %0\";
+#endif
+}")
+
+(define_insn ""
+ [(set (match_operand:HI 0 "general_operand" "=d")
+ (truncate:HI (umod:SI (match_operand:SI 1 "general_operand" "0")
+ (match_operand:SI 2 "const_int_operand" "n"))))]
+ ""
+ "*
+{
+ /* The swap insn produces cc's that don't correspond to the result. */
+ CC_STATUS_INIT;
+#ifdef MOTOROLA
+#ifdef SGS_SWAP_W
+ return \"divu%.w %2,%0\;swap%.w %0\";
+#else
+ return \"divu%.w %2,%0\;swap %0\";
+#endif
+#else
+ return \"divu %2,%0\;swap %0\";
+#endif
+}")
+
+(define_insn "divmodsi4"
+ [(set (match_operand:SI 0 "general_operand" "=d")
+ (div:SI (match_operand:SI 1 "general_operand" "0")
+ (match_operand:SI 2 "general_operand" "dmsK")))
+ (set (match_operand:SI 3 "general_operand" "=d")
+ (mod:SI (match_dup 1) (match_dup 2)))]
+ "TARGET_68020"
+ "*
+{
+ if (find_reg_note (insn, REG_UNUSED, operands[3]))
+ return \"divs%.l %2,%0\";
+ else
+ return \"divsl%.l %2,%3:%0\";
+}")
+
+(define_insn "udivmodsi4"
+ [(set (match_operand:SI 0 "general_operand" "=d")
+ (udiv:SI (match_operand:SI 1 "general_operand" "0")
+ (match_operand:SI 2 "general_operand" "dmsK")))
+ (set (match_operand:SI 3 "general_operand" "=d")
+ (umod:SI (match_dup 1) (match_dup 2)))]
+ "TARGET_68020"
+ "*
+{
+ if (find_reg_note (insn, REG_UNUSED, operands[3]))
+ return \"divu%.l %2,%0\";
+ else
+ return \"divul%.l %2,%3:%0\";
+}")
+\f
+;; logical-and instructions
+
+;; Prevent AND from being made with sp. This doesn't exist in the machine
+;; and reload will cause inefficient code. Since sp is a FIXED_REG, we
+;; can't allocate psuedos into it.
+(define_insn "andsi3"
+ [(set (match_operand:SI 0 "not_sp_operand" "=m,d")
+ (and:SI (match_operand:SI 1 "general_operand" "%0,0")
+ (match_operand:SI 2 "general_operand" "dKs,dmKs")))]
+ ""
+ "*
+{
+ int logval;
+ if (GET_CODE (operands[2]) == CONST_INT
+ && (INTVAL (operands[2]) | 0xffff) == 0xffffffff
+ && (DATA_REG_P (operands[0])
+ || offsettable_memref_p (operands[0])))
+ {
+ if (GET_CODE (operands[0]) != REG)
+ operands[0] = adj_offsettable_operand (operands[0], 2);
+ operands[2] = gen_rtx (CONST_INT, VOIDmode,
+ INTVAL (operands[2]) & 0xffff);
+ /* Do not delete a following tstl %0 insn; that would be incorrect. */
+ CC_STATUS_INIT;
+ if (operands[2] == const0_rtx)
+ return \"clr%.w %0\";
+ return \"and%.w %2,%0\";
+ }
+ if (GET_CODE (operands[2]) == CONST_INT
+ && (logval = exact_log2 (~ INTVAL (operands[2]))) >= 0
+ && (DATA_REG_P (operands[0])
+ || offsettable_memref_p (operands[0])))
+ {
+ if (DATA_REG_P (operands[0]))
+ {
+ operands[1] = gen_rtx (CONST_INT, VOIDmode, logval);
+ }
+ else
+ {
+ operands[0] = adj_offsettable_operand (operands[0], 3 - (logval / 8)); operands[1] = gen_rtx (CONST_INT, VOIDmode, logval % 8);
+ }
+ /* This does not set condition codes in a standard way. */
+ CC_STATUS_INIT;
+ return \"bclr %1,%0\";
+ }
+ return \"and%.l %2,%0\";
+}")
+
+(define_insn "andhi3"
+ [(set (match_operand:HI 0 "general_operand" "=m,d")
+ (and:HI (match_operand:HI 1 "general_operand" "%0,0")
+ (match_operand:HI 2 "general_operand" "dn,dmn")))]
+ ""
+ "and%.w %2,%0")
+
+(define_insn "andqi3"
+ [(set (match_operand:QI 0 "general_operand" "=m,d")
+ (and:QI (match_operand:QI 1 "general_operand" "%0,0")
+ (match_operand:QI 2 "general_operand" "dn,dmn")))]
+ ""
+ "and%.b %2,%0")
+
+\f
+;; inclusive-or instructions
+
+(define_insn "iorsi3"
+ [(set (match_operand:SI 0 "general_operand" "=m,d")
+ (ior:SI (match_operand:SI 1 "general_operand" "%0,0")
+ (match_operand:SI 2 "general_operand" "dKs,dmKs")))]
+ ""
+ "*
+{
+ register int logval;
+ if (GET_CODE (operands[2]) == CONST_INT
+ && INTVAL (operands[2]) >> 16 == 0
+ && (DATA_REG_P (operands[0])
+ || offsettable_memref_p (operands[0])))
+ {
+ if (GET_CODE (operands[0]) != REG)
+ operands[0] = adj_offsettable_operand (operands[0], 2);
+ /* Do not delete a following tstl %0 insn; that would be incorrect. */
+ CC_STATUS_INIT;
+ return \"or%.w %2,%0\";
+ }
+ if (GET_CODE (operands[2]) == CONST_INT
+ && (logval = exact_log2 (INTVAL (operands[2]))) >= 0
+ && (DATA_REG_P (operands[0])
+ || offsettable_memref_p (operands[0])))
+ {
+ if (DATA_REG_P (operands[0]))
+ {
+ operands[1] = gen_rtx (CONST_INT, VOIDmode, logval);
+ }
+ else
+ {
+ operands[0] = adj_offsettable_operand (operands[0], 3 - (logval / 8));
+ operands[1] = gen_rtx (CONST_INT, VOIDmode, logval % 8);
+ }
+ return \"bset %1,%0\";
+ }
+ return \"or%.l %2,%0\";
+}")
+
+(define_insn "iorhi3"
+ [(set (match_operand:HI 0 "general_operand" "=m,d")
+ (ior:HI (match_operand:HI 1 "general_operand" "%0,0")
+ (match_operand:HI 2 "general_operand" "dn,dmn")))]
+ ""
+ "or%.w %2,%0")
+
+(define_insn "iorqi3"
+ [(set (match_operand:QI 0 "general_operand" "=m,d")
+ (ior:QI (match_operand:QI 1 "general_operand" "%0,0")
+ (match_operand:QI 2 "general_operand" "dn,dmn")))]
+ ""
+ "or%.b %2,%0")
+\f
+;; xor instructions
+
+(define_insn "xorsi3"
+ [(set (match_operand:SI 0 "general_operand" "=do,m")
+ (xor:SI (match_operand:SI 1 "general_operand" "%0,0")
+ (match_operand:SI 2 "general_operand" "di,dKs")))]
+ ""
+ "*
+{
+ if (GET_CODE (operands[2]) == CONST_INT
+ && INTVAL (operands[2]) >> 16 == 0
+ && (offsettable_memref_p (operands[0]) || DATA_REG_P (operands[0])))
+ {
+ if (! DATA_REG_P (operands[0]))
+ operands[0] = adj_offsettable_operand (operands[0], 2);
+ /* Do not delete a following tstl %0 insn; that would be incorrect. */
+ CC_STATUS_INIT;
+ return \"eor%.w %2,%0\";
+ }
+ return \"eor%.l %2,%0\";
+}")
+
+(define_insn "xorhi3"
+ [(set (match_operand:HI 0 "general_operand" "=dm")
+ (xor:HI (match_operand:HI 1 "general_operand" "%0")
+ (match_operand:HI 2 "general_operand" "dn")))]
+ ""
+ "eor%.w %2,%0")
+
+(define_insn "xorqi3"
+ [(set (match_operand:QI 0 "general_operand" "=dm")
+ (xor:QI (match_operand:QI 1 "general_operand" "%0")
+ (match_operand:QI 2 "general_operand" "dn")))]
+ ""
+ "eor%.b %2,%0")
+\f
+;; negation instructions
+
+(define_insn "negsi2"
+ [(set (match_operand:SI 0 "general_operand" "=dm")
+ (neg:SI (match_operand:SI 1 "general_operand" "0")))]
+ ""
+ "neg%.l %0")
+
+(define_insn "neghi2"
+ [(set (match_operand:HI 0 "general_operand" "=dm")
+ (neg:HI (match_operand:HI 1 "general_operand" "0")))]
+ ""
+ "neg%.w %0")
+
+(define_insn "negqi2"
+ [(set (match_operand:QI 0 "general_operand" "=dm")
+ (neg:QI (match_operand:QI 1 "general_operand" "0")))]
+ ""
+ "neg%.b %0")
+
+(define_expand "negsf2"
+ [(set (match_operand:SF 0 "general_operand" "")
+ (neg:SF (match_operand:SF 1 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "general_operand" "=x,y")
+ (neg:SF (match_operand:SF 1 "general_operand" "xH,rmF")))]
+ "TARGET_FPA"
+ "fpneg%.s %w1,%0")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "general_operand" "=f,d")
+ (neg:SF (match_operand:SF 1 "general_operand" "fdmF,0")))]
+ "TARGET_68881"
+ "*
+{
+ if (DATA_REG_P (operands[0]))
+ {
+ operands[1] = gen_rtx (CONST_INT, VOIDmode, 31);
+ return \"bchg %1,%0\";
+ }
+ if (REG_P (operands[1]) && ! DATA_REG_P (operands[1]))
+ return \"f%$neg%.x %1,%0\";
+ return \"f%$neg%.s %f1,%0\";
+}")
+
+(define_expand "negdf2"
+ [(set (match_operand:DF 0 "general_operand" "")
+ (neg:DF (match_operand:DF 1 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "general_operand" "=x,y")
+ (neg:DF (match_operand:DF 1 "general_operand" "xH,rmF")))]
+ "TARGET_FPA"
+ "fpneg%.d %y1, %0")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "general_operand" "=f,d")
+ (neg:DF (match_operand:DF 1 "general_operand" "fmF,0")))]
+ "TARGET_68881"
+ "*
+{
+ if (DATA_REG_P (operands[0]))
+ {
+ operands[1] = gen_rtx (CONST_INT, VOIDmode, 31);
+ return \"bchg %1,%0\";
+ }
+ if (REG_P (operands[1]) && ! DATA_REG_P (operands[1]))
+ return \"f%&neg%.x %1,%0\";
+ return \"f%&neg%.d %f1,%0\";
+}")
+\f
+;; Absolute value instructions
+
+(define_expand "abssf2"
+ [(set (match_operand:SF 0 "general_operand" "")
+ (abs:SF (match_operand:SF 1 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "general_operand" "=x,y")
+ (abs:SF (match_operand:SF 1 "general_operand" "xH,rmF")))]
+ "TARGET_FPA"
+ "fpabs%.s %y1,%0")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "general_operand" "=f")
+ (abs:SF (match_operand:SF 1 "general_operand" "fdmF")))]
+ "TARGET_68881"
+ "*
+{
+ if (REG_P (operands[1]) && ! DATA_REG_P (operands[1]))
+ return \"f%$abs%.x %1,%0\";
+ return \"f%$abs%.s %f1,%0\";
+}")
+
+(define_expand "absdf2"
+ [(set (match_operand:DF 0 "general_operand" "")
+ (abs:DF (match_operand:DF 1 "general_operand" "")))]
+ "TARGET_68881 || TARGET_FPA"
+ "")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "general_operand" "=x,y")
+ (abs:DF (match_operand:DF 1 "general_operand" "xH,rmF")))]
+ "TARGET_FPA"
+ "fpabs%.d %y1,%0")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "general_operand" "=f")
+ (abs:DF (match_operand:DF 1 "general_operand" "fmF")))]
+ "TARGET_68881"
+ "*
+{
+ if (REG_P (operands[1]) && ! DATA_REG_P (operands[1]))
+ return \"f%&abs%.x %1,%0\";
+ return \"f%&abs%.d %f1,%0\";
+}")
+\f
+;; one complement instructions
+
+(define_insn "one_cmplsi2"
+ [(set (match_operand:SI 0 "general_operand" "=dm")
+ (not:SI (match_operand:SI 1 "general_operand" "0")))]
+ ""
+ "not%.l %0")
+
+(define_insn "one_cmplhi2"
+ [(set (match_operand:HI 0 "general_operand" "=dm")
+ (not:HI (match_operand:HI 1 "general_operand" "0")))]
+ ""
+ "not%.w %0")
+
+(define_insn "one_cmplqi2"
+ [(set (match_operand:QI 0 "general_operand" "=dm")
+ (not:QI (match_operand:QI 1 "general_operand" "0")))]
+ ""
+ "not%.b %0")
+\f
+;; arithmetic shift instructions
+;; We don't need the shift memory by 1 bit instruction
+
+;; On the 68000, this makes faster code in a special case.
+
+(define_insn ""
+ [(set (match_operand:SI 0 "register_operand" "=d")
+ (ashift:SI (match_operand:SI 1 "register_operand" "0")
+ (match_operand:SI 2 "immediate_operand" "i")))]
+ "(! TARGET_68020 && GET_CODE (operands[2]) == CONST_INT
+ && INTVAL (operands[2]) >= 16 && INTVAL (operands[2]) <= 24)"
+ "*
+{
+ CC_STATUS_INIT;
+
+ if (INTVAL (operands[2]) == 16)
+ return \"swap %0\;clrw %0\";
+
+ operands[2] = gen_rtx (CONST_INT, VOIDmode, INTVAL (operands[2]) - 16);
+ return \"asl%.w %2,%0\;swap %0\;clrw %0\";
+}")
+
+(define_insn "ashlsi3"
+ [(set (match_operand:SI 0 "register_operand" "=d")
+ (ashift:SI (match_operand:SI 1 "register_operand" "0")
+ (match_operand:SI 2 "general_operand" "dI")))]
+ ""
+ "*
+{
+ if (operands[2] == const1_rtx)
+ return \"add%.l %0,%0\";
+ return \"asl%.l %2,%0\";
+}")
+
+(define_insn "ashlhi3"
+ [(set (match_operand:HI 0 "register_operand" "=d")
+ (ashift:HI (match_operand:HI 1 "register_operand" "0")
+ (match_operand:HI 2 "general_operand" "dI")))]
+ ""
+ "asl%.w %2,%0")
+
+(define_insn "ashlqi3"
+ [(set (match_operand:QI 0 "register_operand" "=d")
+ (ashift:QI (match_operand:QI 1 "register_operand" "0")
+ (match_operand:QI 2 "general_operand" "dI")))]
+ ""
+ "asl%.b %2,%0")
+
+;; On the 68000, this makes faster code in a special case.
+
+(define_insn ""
+ [(set (match_operand:SI 0 "register_operand" "=d")
+ (ashiftrt:SI (match_operand:SI 1 "register_operand" "0")
+ (match_operand:SI 2 "immediate_operand" "i")))]
+ "(! TARGET_68020 && GET_CODE (operands[2]) == CONST_INT
+ && INTVAL (operands[2]) >= 16 && INTVAL (operands[2]) <= 24)"
+ "*
+{
+ if (INTVAL (operands[2]) == 16)
+ return \"swap %0\;ext%.l %0\";
+
+ operands[2] = gen_rtx (CONST_INT, VOIDmode, INTVAL (operands[2]) - 16);
+ return \"swap %0\;asr%.w %2,%0\;ext%.l %0\";
+}")
+
+(define_insn "ashrsi3"
+ [(set (match_operand:SI 0 "register_operand" "=d")
+ (ashiftrt:SI (match_operand:SI 1 "register_operand" "0")
+ (match_operand:SI 2 "general_operand" "dI")))]
+ ""
+ "*
+{
+ return \"asr%.l %2,%0\";
+}")
+
+(define_insn "ashrhi3"
+ [(set (match_operand:HI 0 "register_operand" "=d")
+ (ashiftrt:HI (match_operand:HI 1 "register_operand" "0")
+ (match_operand:HI 2 "general_operand" "dI")))]
+ ""
+ "asr%.w %2,%0")
+
+(define_insn "ashrqi3"
+ [(set (match_operand:QI 0 "register_operand" "=d")
+ (ashiftrt:QI (match_operand:QI 1 "register_operand" "0")
+ (match_operand:QI 2 "general_operand" "dI")))]
+ ""
+ "asr%.b %2,%0")
+\f
+;; logical shift instructions
+
+;; On the 68000, this makes faster code in a special case.
+
+(define_insn ""
+ [(set (match_operand:SI 0 "register_operand" "=d")
+ (lshift:SI (match_operand:SI 1 "register_operand" "0")
+ (match_operand:SI 2 "immediate_operand" "i")))]
+ "(! TARGET_68020 && GET_CODE (operands[2]) == CONST_INT
+ && INTVAL (operands[2]) >= 16 && INTVAL (operands[2]) <= 24)"
+ "*
+{
+ CC_STATUS_INIT;
+
+ if (INTVAL (operands[2]) == 16)
+ return \"swap %0\;clrw %0\";
+
+ operands[2] = gen_rtx (CONST_INT, VOIDmode, INTVAL (operands[2]) - 16);
+ return \"lsl%.w %2,%0\;swap %0\;clrw %0\";
+}")
+
+(define_insn "lshlsi3"
+ [(set (match_operand:SI 0 "register_operand" "=d")
+ (lshift:SI (match_operand:SI 1 "register_operand" "0")
+ (match_operand:SI 2 "general_operand" "dI")))]
+ ""
+ "*
+{
+ if (operands[2] == const1_rtx)
+ return \"add%.l %0,%0\";
+ return \"lsl%.l %2,%0\";
+}")
+
+(define_insn "lshlhi3"
+ [(set (match_operand:HI 0 "register_operand" "=d")
+ (lshift:HI (match_operand:HI 1 "register_operand" "0")
+ (match_operand:HI 2 "general_operand" "dI")))]
+ ""
+ "lsl%.w %2,%0")
+
+(define_insn "lshlqi3"
+ [(set (match_operand:QI 0 "register_operand" "=d")
+ (lshift:QI (match_operand:QI 1 "register_operand" "0")
+ (match_operand:QI 2 "general_operand" "dI")))]
+ ""
+ "lsl%.b %2,%0")
+
+;; On the 68000, this makes faster code in a special case.
+
+(define_insn ""
+ [(set (match_operand:SI 0 "register_operand" "=d")
+ (lshiftrt:SI (match_operand:SI 1 "register_operand" "0")
+ (match_operand:SI 2 "immediate_operand" "i")))]
+ "(! TARGET_68020 && GET_CODE (operands[2]) == CONST_INT
+ && INTVAL (operands[2]) >= 16 && INTVAL (operands[2]) <= 24)"
+ "*
+{
+ if (INTVAL (operands[2]) == 16)
+ {
+ CC_STATUS_INIT;
+ return \"clrw %0\;swap %0\";
+ }
+
+ /* I think lsr%.w sets the CC properly. */
+ operands[2] = gen_rtx (CONST_INT, VOIDmode, INTVAL (operands[2]) - 16);
+ return \"clrw %0\;swap %0\;lsr%.w %2,%0\";
+}")
+
+(define_insn "lshrsi3"
+ [(set (match_operand:SI 0 "register_operand" "=d")
+ (lshiftrt:SI (match_operand:SI 1 "register_operand" "0")
+ (match_operand:SI 2 "general_operand" "dI")))]
+ ""
+ "*
+{
+ return \"lsr%.l %2,%0\";
+}")
+
+(define_insn "lshrhi3"
+ [(set (match_operand:HI 0 "register_operand" "=d")
+ (lshiftrt:HI (match_operand:HI 1 "register_operand" "0")
+ (match_operand:HI 2 "general_operand" "dI")))]
+ ""
+ "lsr%.w %2,%0")
+
+(define_insn "lshrqi3"
+ [(set (match_operand:QI 0 "register_operand" "=d")
+ (lshiftrt:QI (match_operand:QI 1 "register_operand" "0")
+ (match_operand:QI 2 "general_operand" "dI")))]
+ ""
+ "lsr%.b %2,%0")
+\f
+;; rotate instructions
+
+(define_insn "rotlsi3"
+ [(set (match_operand:SI 0 "register_operand" "=d")
+ (rotate:SI (match_operand:SI 1 "register_operand" "0")
+ (match_operand:SI 2 "general_operand" "dI")))]
+ ""
+ "rol%.l %2,%0")
+
+(define_insn "rotlhi3"
+ [(set (match_operand:HI 0 "register_operand" "=d")
+ (rotate:HI (match_operand:HI 1 "register_operand" "0")
+ (match_operand:HI 2 "general_operand" "dI")))]
+ ""
+ "rol%.w %2,%0")
+
+(define_insn "rotlqi3"
+ [(set (match_operand:QI 0 "register_operand" "=d")
+ (rotate:QI (match_operand:QI 1 "register_operand" "0")
+ (match_operand:QI 2 "general_operand" "dI")))]
+ ""
+ "rol%.b %2,%0")
+
+(define_insn "rotrsi3"
+ [(set (match_operand:SI 0 "register_operand" "=d")
+ (rotatert:SI (match_operand:SI 1 "register_operand" "0")
+ (match_operand:SI 2 "general_operand" "dI")))]
+ ""
+ "ror%.l %2,%0")
+
+(define_insn "rotrhi3"
+ [(set (match_operand:HI 0 "register_operand" "=d")
+ (rotatert:HI (match_operand:HI 1 "register_operand" "0")
+ (match_operand:HI 2 "general_operand" "dI")))]
+ ""
+ "ror%.w %2,%0")
+
+(define_insn "rotrqi3"
+ [(set (match_operand:QI 0 "register_operand" "=d")
+ (rotatert:QI (match_operand:QI 1 "register_operand" "0")
+ (match_operand:QI 2 "general_operand" "dI")))]
+ ""
+ "ror%.b %2,%0")
+\f
+;; Special cases of bit-field insns which we should
+;; recognize in preference to the general case.
+;; These handle aligned 8-bit and 16-bit fields,
+;; which can usually be done with move instructions.
+
+;
+; Special case for 32-bit field in memory. This only occurs when 32-bit
+; alignment of structure members is specified.
+;
+; The move is allowed to be odd byte aligned, because that's still faster
+; than an odd byte aligned bit field instruction.
+;
+(define_insn ""
+ [(set (zero_extract:SI (match_operand:QI 0 "nonimmediate_operand" "o")
+ (match_operand:SI 1 "immediate_operand" "i")
+ (match_operand:SI 2 "immediate_operand" "i"))
+ (match_operand:SI 3 "general_operand" "rmi"))]
+ "TARGET_68020 && TARGET_BITFIELD
+ && GET_CODE (operands[1]) == CONST_INT
+ && (INTVAL (operands[1]) == 32)
+ && GET_CODE (operands[2]) == CONST_INT
+ && (INTVAL (operands[2]) % 8) == 0
+ && ! mode_dependent_address_p (XEXP (operands[0], 0))"
+ "*
+{
+ operands[0]
+ = adj_offsettable_operand (operands[0], INTVAL (operands[2]) / 8);
+
+ return \"move%.l %3,%0\";
+}")
+
+(define_insn ""
+ [(set (zero_extract:SI (match_operand:SI 0 "nonimmediate_operand" "+do")
+ (match_operand:SI 1 "immediate_operand" "i")
+ (match_operand:SI 2 "immediate_operand" "i"))
+ (match_operand:SI 3 "general_operand" "d"))]
+ "TARGET_68020 && TARGET_BITFIELD
+ && GET_CODE (operands[1]) == CONST_INT
+ && (INTVAL (operands[1]) == 8 || INTVAL (operands[1]) == 16)
+ && GET_CODE (operands[2]) == CONST_INT
+ && INTVAL (operands[2]) % INTVAL (operands[1]) == 0
+ && (GET_CODE (operands[0]) == REG
+ || ! mode_dependent_address_p (XEXP (operands[0], 0)))"
+ "*
+{
+ if (REG_P (operands[0]))
+ {
+ if (INTVAL (operands[1]) + INTVAL (operands[2]) != 32)
+ return \"bfins %3,%0{%b2:%b1}\";
+ }
+ else
+ operands[0]
+ = adj_offsettable_operand (operands[0], INTVAL (operands[2]) / 8);
+
+ if (GET_CODE (operands[3]) == MEM)
+ operands[3] = adj_offsettable_operand (operands[3],
+ (32 - INTVAL (operands[1])) / 8);
+ if (INTVAL (operands[1]) == 8)
+ return \"move%.b %3,%0\";
+ return \"move%.w %3,%0\";
+}")
+
+
+;
+; Special case for 32-bit field in memory. This only occurs when 32-bit
+; alignment of structure members is specified.
+;
+; The move is allowed to be odd byte aligned, because that's still faster
+; than an odd byte aligned bit field instruction.
+;
+(define_insn ""
+ [(set (match_operand:SI 0 "general_operand" "=rm")
+ (zero_extract:SI (match_operand:QI 1 "nonimmediate_operand" "o")
+ (match_operand:SI 2 "immediate_operand" "i")
+ (match_operand:SI 3 "immediate_operand" "i")))]
+ "TARGET_68020 && TARGET_BITFIELD
+ && GET_CODE (operands[2]) == CONST_INT
+ && (INTVAL (operands[2]) == 32)
+ && GET_CODE (operands[3]) == CONST_INT
+ && (INTVAL (operands[3]) % 8) == 0
+ && ! mode_dependent_address_p (XEXP (operands[1], 0))"
+ "*
+{
+ operands[1]
+ = adj_offsettable_operand (operands[1], INTVAL (operands[3]) / 8);
+
+ return \"move%.l %1,%0\";
+}")
+
+(define_insn ""
+ [(set (match_operand:SI 0 "general_operand" "=&d")
+ (zero_extract:SI (match_operand:SI 1 "nonimmediate_operand" "do")
+ (match_operand:SI 2 "immediate_operand" "i")
+ (match_operand:SI 3 "immediate_operand" "i")))]
+ "TARGET_68020 && TARGET_BITFIELD
+ && GET_CODE (operands[2]) == CONST_INT
+ && (INTVAL (operands[2]) == 8 || INTVAL (operands[2]) == 16)
+ && GET_CODE (operands[3]) == CONST_INT
+ && INTVAL (operands[3]) % INTVAL (operands[2]) == 0
+ && (GET_CODE (operands[1]) == REG
+ || ! mode_dependent_address_p (XEXP (operands[1], 0)))"
+ "*
+{
+ cc_status.flags |= CC_NOT_NEGATIVE;
+ if (REG_P (operands[1]))
+ {
+ if (INTVAL (operands[2]) + INTVAL (operands[3]) != 32)
+ return \"bfextu %1{%b3:%b2},%0\";
+ }
+ else
+ operands[1]
+ = adj_offsettable_operand (operands[1], INTVAL (operands[3]) / 8);
+
+ output_asm_insn (\"clr%.l %0\", operands);
+ if (GET_CODE (operands[0]) == MEM)
+ operands[0] = adj_offsettable_operand (operands[0],
+ (32 - INTVAL (operands[1])) / 8);
+ if (INTVAL (operands[2]) == 8)
+ return \"move%.b %1,%0\";
+ return \"move%.w %1,%0\";
+}")
+
+;
+; Special case for 32-bit field in memory. This only occurs when 32-bit
+; alignment of structure members is specified.
+;
+; The move is allowed to be odd byte aligned, because that's still faster
+; than an odd byte aligned bit field instruction.
+;
+(define_insn ""
+ [(set (match_operand:SI 0 "general_operand" "=rm")
+ (sign_extract:SI (match_operand:QI 1 "nonimmediate_operand" "o")
+ (match_operand:SI 2 "immediate_operand" "i")
+ (match_operand:SI 3 "immediate_operand" "i")))]
+ "TARGET_68020 && TARGET_BITFIELD
+ && GET_CODE (operands[2]) == CONST_INT
+ && (INTVAL (operands[2]) == 32)
+ && GET_CODE (operands[3]) == CONST_INT
+ && (INTVAL (operands[3]) % 8) == 0
+ && ! mode_dependent_address_p (XEXP (operands[1], 0))"
+ "*
+{
+ operands[1]
+ = adj_offsettable_operand (operands[1], INTVAL (operands[3]) / 8);
+
+ return \"move%.l %1,%0\";
+}")
+
+(define_insn ""
+ [(set (match_operand:SI 0 "general_operand" "=d")
+ (sign_extract:SI (match_operand:SI 1 "nonimmediate_operand" "do")
+ (match_operand:SI 2 "immediate_operand" "i")
+ (match_operand:SI 3 "immediate_operand" "i")))]
+ "TARGET_68020 && TARGET_BITFIELD
+ && GET_CODE (operands[2]) == CONST_INT
+ && (INTVAL (operands[2]) == 8 || INTVAL (operands[2]) == 16)
+ && GET_CODE (operands[3]) == CONST_INT
+ && INTVAL (operands[3]) % INTVAL (operands[2]) == 0
+ && (GET_CODE (operands[1]) == REG
+ || ! mode_dependent_address_p (XEXP (operands[1], 0)))"
+ "*
+{
+ if (REG_P (operands[1]))
+ {
+ if (INTVAL (operands[2]) + INTVAL (operands[3]) != 32)
+ return \"bfexts %1{%b3:%b2},%0\";
+ }
+ else
+ operands[1]
+ = adj_offsettable_operand (operands[1], INTVAL (operands[3]) / 8);
+
+ if (INTVAL (operands[2]) == 8)
+ return \"move%.b %1,%0\;extb%.l %0\";
+ return \"move%.w %1,%0\;ext%.l %0\";
+}")
+\f
+;; Bit field instructions, general cases.
+;; "o,d" constraint causes a nonoffsettable memref to match the "o"
+;; so that its address is reloaded.
+
+(define_insn "extv"
+ [(set (match_operand:SI 0 "general_operand" "=d,d")
+ (sign_extract:SI (match_operand:QI 1 "nonimmediate_operand" "o,d")
+ (match_operand:SI 2 "general_operand" "di,di")
+ (match_operand:SI 3 "general_operand" "di,di")))]
+ "TARGET_68020 && TARGET_BITFIELD"
+ "bfexts %1{%b3:%b2},%0")
+
+(define_insn "extzv"
+ [(set (match_operand:SI 0 "general_operand" "=d,d")
+ (zero_extract:SI (match_operand:QI 1 "nonimmediate_operand" "o,d")
+ (match_operand:SI 2 "general_operand" "di,di")
+ (match_operand:SI 3 "general_operand" "di,di")))]
+ "TARGET_68020 && TARGET_BITFIELD"
+ "*
+{
+ cc_status.flags |= CC_NOT_NEGATIVE;
+ return \"bfextu %1{%b3:%b2},%0\";
+}")
+
+(define_insn ""
+ [(set (zero_extract:SI (match_operand:QI 0 "nonimmediate_operand" "+o,d")
+ (match_operand:SI 1 "general_operand" "di,di")
+ (match_operand:SI 2 "general_operand" "di,di"))
+ (xor:SI (zero_extract:SI (match_dup 0) (match_dup 1) (match_dup 2))
+ (match_operand 3 "immediate_operand" "i,i")))]
+ "TARGET_68020 && TARGET_BITFIELD
+ && GET_CODE (operands[3]) == CONST_INT
+ && (INTVAL (operands[3]) == -1
+ || (GET_CODE (operands[1]) == CONST_INT
+ && (~ INTVAL (operands[3]) & ((1 << INTVAL (operands[1]))- 1)) == 0))"
+ "*
+{
+ CC_STATUS_INIT;
+ return \"bfchg %0{%b2:%b1}\";
+}")
+
+(define_insn ""
+ [(set (zero_extract:SI (match_operand:QI 0 "nonimmediate_operand" "+o,d")
+ (match_operand:SI 1 "general_operand" "di,di")
+ (match_operand:SI 2 "general_operand" "di,di"))
+ (const_int 0))]
+ "TARGET_68020 && TARGET_BITFIELD"
+ "*
+{
+ CC_STATUS_INIT;
+ return \"bfclr %0{%b2:%b1}\";
+}")
+
+(define_insn ""
+ [(set (zero_extract:SI (match_operand:QI 0 "nonimmediate_operand" "+o,d")
+ (match_operand:SI 1 "general_operand" "di,di")
+ (match_operand:SI 2 "general_operand" "di,di"))
+ (const_int -1))]
+ "TARGET_68020 && TARGET_BITFIELD"
+ "*
+{
+ CC_STATUS_INIT;
+ return \"bfset %0{%b2:%b1}\";
+}")
+
+(define_insn "insv"
+ [(set (zero_extract:SI (match_operand:QI 0 "nonimmediate_operand" "+o,d")
+ (match_operand:SI 1 "general_operand" "di,di")
+ (match_operand:SI 2 "general_operand" "di,di"))
+ (match_operand:SI 3 "general_operand" "d,d"))]
+ "TARGET_68020 && TARGET_BITFIELD"
+ "bfins %3,%0{%b2:%b1}")
+
+;; Now recognize bit field insns that operate on registers
+;; (or at least were intended to do so).
+
+(define_insn ""
+ [(set (match_operand:SI 0 "general_operand" "=d")
+ (sign_extract:SI (match_operand:SI 1 "nonimmediate_operand" "d")
+ (match_operand:SI 2 "general_operand" "di")
+ (match_operand:SI 3 "general_operand" "di")))]
+ "TARGET_68020 && TARGET_BITFIELD"
+ "bfexts %1{%b3:%b2},%0")
+
+(define_insn ""
+ [(set (match_operand:SI 0 "general_operand" "=d")
+ (zero_extract:SI (match_operand:SI 1 "nonimmediate_operand" "d")
+ (match_operand:SI 2 "general_operand" "di")
+ (match_operand:SI 3 "general_operand" "di")))]
+ "TARGET_68020 && TARGET_BITFIELD"
+ "*
+{
+ cc_status.flags |= CC_NOT_NEGATIVE;
+ return \"bfextu %1{%b3:%b2},%0\";
+}")
+
+(define_insn ""
+ [(set (zero_extract:SI (match_operand:SI 0 "nonimmediate_operand" "+d")
+ (match_operand:SI 1 "general_operand" "di")
+ (match_operand:SI 2 "general_operand" "di"))
+ (const_int 0))]
+ "TARGET_68020 && TARGET_BITFIELD"
+ "*
+{
+ CC_STATUS_INIT;
+ return \"bfclr %0{%b2:%b1}\";
+}")
+
+(define_insn ""
+ [(set (zero_extract:SI (match_operand:SI 0 "nonimmediate_operand" "+d")
+ (match_operand:SI 1 "general_operand" "di")
+ (match_operand:SI 2 "general_operand" "di"))
+ (const_int -1))]
+ "TARGET_68020 && TARGET_BITFIELD"
+ "*
+{
+ CC_STATUS_INIT;
+ return \"bfset %0{%b2:%b1}\";
+}")
+
+(define_insn ""
+ [(set (zero_extract:SI (match_operand:SI 0 "nonimmediate_operand" "+d")
+ (match_operand:SI 1 "general_operand" "di")
+ (match_operand:SI 2 "general_operand" "di"))
+ (match_operand:SI 3 "general_operand" "d"))]
+ "TARGET_68020 && TARGET_BITFIELD"
+ "*
+{
+#if 0
+ /* These special cases are now recognized by a specific pattern. */
+ if (GET_CODE (operands[1]) == CONST_INT && GET_CODE (operands[2]) == CONST_INT
+ && INTVAL (operands[1]) == 16 && INTVAL (operands[2]) == 16)
+ return \"move%.w %3,%0\";
+ if (GET_CODE (operands[1]) == CONST_INT && GET_CODE (operands[2]) == CONST_INT
+ && INTVAL (operands[1]) == 24 && INTVAL (operands[2]) == 8)
+ return \"move%.b %3,%0\";
+#endif
+ return \"bfins %3,%0{%b2:%b1}\";
+}")
+\f
+;; Special patterns for optimizing bit-field instructions.
+
+(define_insn ""
+ [(set (cc0)
+ (zero_extract:SI (match_operand:QI 0 "memory_operand" "o")
+ (match_operand:SI 1 "general_operand" "di")
+ (match_operand:SI 2 "general_operand" "di")))]
+ "TARGET_68020 && TARGET_BITFIELD
+ && GET_CODE (operands[1]) == CONST_INT"
+ "*
+{
+ if (operands[1] == const1_rtx
+ && GET_CODE (operands[2]) == CONST_INT)
+ {
+ int width = GET_CODE (operands[0]) == REG ? 31 : 7;
+ return output_btst (operands,
+ gen_rtx (CONST_INT, VOIDmode,
+ width - INTVAL (operands[2])),
+ operands[0],
+ insn, 1000);
+ /* Pass 1000 as SIGNPOS argument so that btst will
+ not think we are testing the sign bit for an `and'
+ and assume that nonzero implies a negative result. */
+ }
+ if (INTVAL (operands[1]) != 32)
+ cc_status.flags = CC_NOT_NEGATIVE;
+ return \"bftst %0{%b2:%b1}\";
+}")
+
+
+;;; now handle the register cases
+(define_insn ""
+ [(set (cc0)
+ (zero_extract:SI (match_operand:SI 0 "nonimmediate_operand" "d")
+ (match_operand:SI 1 "general_operand" "di")
+ (match_operand:SI 2 "general_operand" "di")))]
+ "TARGET_68020 && TARGET_BITFIELD
+ && GET_CODE (operands[1]) == CONST_INT"
+ "*
+{
+ if (operands[1] == const1_rtx
+ && GET_CODE (operands[2]) == CONST_INT)
+ {
+ int width = GET_CODE (operands[0]) == REG ? 31 : 7;
+ return output_btst (operands,
+ gen_rtx (CONST_INT, VOIDmode,
+ width - INTVAL (operands[2])),
+ operands[0],
+ insn, 1000);
+ /* Pass 1000 as SIGNPOS argument so that btst will
+ not think we are testing the sign bit for an `and'
+ and assume that nonzero implies a negative result. */
+ }
+ if (INTVAL (operands[1]) != 32)
+ cc_status.flags = CC_NOT_NEGATIVE;
+ return \"bftst %0{%b2:%b1}\";
+}")
+\f
+(define_insn "seq"
+ [(set (match_operand:QI 0 "general_operand" "=d")
+ (eq:QI (cc0) (const_int 0)))]
+ ""
+ "*
+ cc_status = cc_prev_status;
+ OUTPUT_JUMP (\"seq %0\", \"fseq %0\", \"seq %0\");
+")
+
+(define_insn "sne"
+ [(set (match_operand:QI 0 "general_operand" "=d")
+ (ne:QI (cc0) (const_int 0)))]
+ ""
+ "*
+ cc_status = cc_prev_status;
+ OUTPUT_JUMP (\"sne %0\", \"fsne %0\", \"sne %0\");
+")
+
+(define_insn "sgt"
+ [(set (match_operand:QI 0 "general_operand" "=d")
+ (gt:QI (cc0) (const_int 0)))]
+ ""
+ "*
+ cc_status = cc_prev_status;
+ OUTPUT_JUMP (\"sgt %0\", \"fsgt %0\", 0);
+")
+
+(define_insn "sgtu"
+ [(set (match_operand:QI 0 "general_operand" "=d")
+ (gtu:QI (cc0) (const_int 0)))]
+ ""
+ "* cc_status = cc_prev_status;
+ return \"shi %0\"; ")
+
+(define_insn "slt"
+ [(set (match_operand:QI 0 "general_operand" "=d")
+ (lt:QI (cc0) (const_int 0)))]
+ ""
+ "* cc_status = cc_prev_status;
+ OUTPUT_JUMP (\"slt %0\", \"fslt %0\", \"smi %0\"); ")
+
+(define_insn "sltu"
+ [(set (match_operand:QI 0 "general_operand" "=d")
+ (ltu:QI (cc0) (const_int 0)))]
+ ""
+ "* cc_status = cc_prev_status;
+ return \"scs %0\"; ")
+
+(define_insn "sge"
+ [(set (match_operand:QI 0 "general_operand" "=d")
+ (ge:QI (cc0) (const_int 0)))]
+ ""
+ "* cc_status = cc_prev_status;
+ OUTPUT_JUMP (\"sge %0\", \"fsge %0\", \"spl %0\"); ")
+
+(define_insn "sgeu"
+ [(set (match_operand:QI 0 "general_operand" "=d")
+ (geu:QI (cc0) (const_int 0)))]
+ ""
+ "* cc_status = cc_prev_status;
+ return \"scc %0\"; ")
+
+(define_insn "sle"
+ [(set (match_operand:QI 0 "general_operand" "=d")
+ (le:QI (cc0) (const_int 0)))]
+ ""
+ "*
+ cc_status = cc_prev_status;
+ OUTPUT_JUMP (\"sle %0\", \"fsle %0\", 0);
+")
+
+(define_insn "sleu"
+ [(set (match_operand:QI 0 "general_operand" "=d")
+ (leu:QI (cc0) (const_int 0)))]
+ ""
+ "* cc_status = cc_prev_status;
+ return \"sls %0\"; ")
+\f
+;; Basic conditional jump instructions.
+
+(define_insn "beq"
+ [(set (pc)
+ (if_then_else (eq (cc0)
+ (const_int 0))
+ (label_ref (match_operand 0 "" ""))
+ (pc)))]
+ ""
+ "*
+{
+#ifdef MOTOROLA
+ OUTPUT_JUMP (\"jbeq %l0\", \"fbeq %l0\", \"jbeq %l0\");
+#else
+ OUTPUT_JUMP (\"jeq %l0\", \"fjeq %l0\", \"jeq %l0\");
+#endif
+}")
+
+(define_insn "bne"
+ [(set (pc)
+ (if_then_else (ne (cc0)
+ (const_int 0))
+ (label_ref (match_operand 0 "" ""))
+ (pc)))]
+ ""
+ "*
+{
+#ifdef MOTOROLA
+ OUTPUT_JUMP (\"jbne %l0\", \"fbne %l0\", \"jbne %l0\");
+#else
+ OUTPUT_JUMP (\"jne %l0\", \"fjne %l0\", \"jne %l0\");
+#endif
+}")
+
+(define_insn "bgt"
+ [(set (pc)
+ (if_then_else (gt (cc0)
+ (const_int 0))
+ (label_ref (match_operand 0 "" ""))
+ (pc)))]
+ ""
+ "*
+#ifdef MOTOROLA
+ OUTPUT_JUMP (\"jbgt %l0\", \"fbgt %l0\", 0);
+#else
+ OUTPUT_JUMP (\"jgt %l0\", \"fjgt %l0\", 0);
+#endif
+")
+
+(define_insn "bgtu"
+ [(set (pc)
+ (if_then_else (gtu (cc0)
+ (const_int 0))
+ (label_ref (match_operand 0 "" ""))
+ (pc)))]
+ ""
+ "*
+#ifdef MOTOROLA
+ return \"jbhi %l0\";
+#else
+ return \"jhi %l0\";
+#endif
+")
+
+(define_insn "blt"
+ [(set (pc)
+ (if_then_else (lt (cc0)
+ (const_int 0))
+ (label_ref (match_operand 0 "" ""))
+ (pc)))]
+ ""
+ "*
+#ifdef MOTOROLA
+ OUTPUT_JUMP (\"jblt %l0\", \"fblt %l0\", \"jbmi %l0\");
+#else
+ OUTPUT_JUMP (\"jlt %l0\", \"fjlt %l0\", \"jmi %l0\");
+#endif
+")
+
+(define_insn "bltu"
+ [(set (pc)
+ (if_then_else (ltu (cc0)
+ (const_int 0))
+ (label_ref (match_operand 0 "" ""))
+ (pc)))]
+ ""
+ "*
+#ifdef MOTOROLA
+ return \"jbcs %l0\";
+#else
+ return \"jcs %l0\";
+#endif
+")
+
+(define_insn "bge"
+ [(set (pc)
+ (if_then_else (ge (cc0)
+ (const_int 0))
+ (label_ref (match_operand 0 "" ""))
+ (pc)))]
+ ""
+ "*
+#ifdef MOTOROLA
+ OUTPUT_JUMP (\"jbge %l0\", \"fbge %l0\", \"jbpl %l0\");
+#else
+ OUTPUT_JUMP (\"jge %l0\", \"fjge %l0\", \"jpl %l0\");
+#endif
+")
+
+(define_insn "bgeu"
+ [(set (pc)
+ (if_then_else (geu (cc0)
+ (const_int 0))
+ (label_ref (match_operand 0 "" ""))
+ (pc)))]
+ ""
+ "*
+#ifdef MOTOROLA
+ return \"jbcc %l0\";
+#else
+ return \"jcc %l0\";
+#endif
+")
+
+(define_insn "ble"
+ [(set (pc)
+ (if_then_else (le (cc0)
+ (const_int 0))
+ (label_ref (match_operand 0 "" ""))
+ (pc)))]
+ ""
+ "*
+#ifdef MOTOROLA
+ OUTPUT_JUMP (\"jble %l0\", \"fble %l0\", 0);
+#else
+ OUTPUT_JUMP (\"jle %l0\", \"fjle %l0\", 0);
+#endif
+")
+
+(define_insn "bleu"
+ [(set (pc)
+ (if_then_else (leu (cc0)
+ (const_int 0))
+ (label_ref (match_operand 0 "" ""))
+ (pc)))]
+ ""
+ "*
+#ifdef MOTOROLA
+ return \"jbls %l0\";
+#else
+ return \"jls %l0\";
+#endif
+")
+\f
+;; Negated conditional jump instructions.
+
+(define_insn ""
+ [(set (pc)
+ (if_then_else (eq (cc0)
+ (const_int 0))
+ (pc)
+ (label_ref (match_operand 0 "" ""))))]
+ ""
+ "*
+{
+#ifdef MOTOROLA
+ OUTPUT_JUMP (\"jbne %l0\", \"fbne %l0\", \"jbne %l0\");
+#else
+ OUTPUT_JUMP (\"jne %l0\", \"fjne %l0\", \"jne %l0\");
+#endif
+}")
+
+(define_insn ""
+ [(set (pc)
+ (if_then_else (ne (cc0)
+ (const_int 0))
+ (pc)
+ (label_ref (match_operand 0 "" ""))))]
+ ""
+ "*
+{
+#ifdef MOTOROLA
+ OUTPUT_JUMP (\"jbeq %l0\", \"fbeq %l0\", \"jbeq %l0\");
+#else
+ OUTPUT_JUMP (\"jeq %l0\", \"fjeq %l0\", \"jeq %l0\");
+#endif
+}")
+
+(define_insn ""
+ [(set (pc)
+ (if_then_else (gt (cc0)
+ (const_int 0))
+ (pc)
+ (label_ref (match_operand 0 "" ""))))]
+ ""
+ "*
+#ifdef MOTOROLA
+ OUTPUT_JUMP (\"jble %l0\", \"fbngt %l0\", 0);
+#else
+ OUTPUT_JUMP (\"jle %l0\", \"fjngt %l0\", 0);
+#endif
+")
+
+(define_insn ""
+ [(set (pc)
+ (if_then_else (gtu (cc0)
+ (const_int 0))
+ (pc)
+ (label_ref (match_operand 0 "" ""))))]
+ ""
+ "*
+#ifdef MOTOROLA
+ return \"jbls %l0\";
+#else
+ return \"jls %l0\";
+#endif
+")
+
+(define_insn ""
+ [(set (pc)
+ (if_then_else (lt (cc0)
+ (const_int 0))
+ (pc)
+ (label_ref (match_operand 0 "" ""))))]
+ ""
+ "*
+#ifdef MOTOROLA
+ OUTPUT_JUMP (\"jbge %l0\", \"fbnlt %l0\", \"jbpl %l0\");
+#else
+ OUTPUT_JUMP (\"jge %l0\", \"fjnlt %l0\", \"jpl %l0\");
+#endif
+")
+
+(define_insn ""
+ [(set (pc)
+ (if_then_else (ltu (cc0)
+ (const_int 0))
+ (pc)
+ (label_ref (match_operand 0 "" ""))))]
+ ""
+ "*
+#ifdef MOTOROLA
+ return \"jbcc %l0\";
+#else
+ return \"jcc %l0\";
+#endif
+")
+
+(define_insn ""
+ [(set (pc)
+ (if_then_else (ge (cc0)
+ (const_int 0))
+ (pc)
+ (label_ref (match_operand 0 "" ""))))]
+ ""
+ "*
+#ifdef MOTOROLA
+ OUTPUT_JUMP (\"jblt %l0\", \"fbnge %l0\", \"jbmi %l0\");
+#else
+ OUTPUT_JUMP (\"jlt %l0\", \"fjnge %l0\", \"jmi %l0\");
+#endif
+")
+
+(define_insn ""
+ [(set (pc)
+ (if_then_else (geu (cc0)
+ (const_int 0))
+ (pc)
+ (label_ref (match_operand 0 "" ""))))]
+ ""
+ "*
+#ifdef MOTOROLA
+ return \"jbcs %l0\";
+#else
+ return \"jcs %l0\";
+#endif
+")
+
+(define_insn ""
+ [(set (pc)
+ (if_then_else (le (cc0)
+ (const_int 0))
+ (pc)
+ (label_ref (match_operand 0 "" ""))))]
+ ""
+ "*
+#ifdef MOTOROLA
+ OUTPUT_JUMP (\"jbgt %l0\", \"fbnle %l0\", 0);
+#else
+ OUTPUT_JUMP (\"jgt %l0\", \"fjnle %l0\", 0);
+#endif
+")
+
+(define_insn ""
+ [(set (pc)
+ (if_then_else (leu (cc0)
+ (const_int 0))
+ (pc)
+ (label_ref (match_operand 0 "" ""))))]
+ ""
+ "*
+#ifdef MOTOROLA
+ return \"jbhi %l0\";
+#else
+ return \"jhi %l0\";
+#endif
+")
+\f
+;; Unconditional and other jump instructions
+(define_insn "jump"
+ [(set (pc)
+ (label_ref (match_operand 0 "" "")))]
+ ""
+ "*
+#ifdef MOTOROLA
+ return \"jbra %l0\";
+#else
+ return \"jra %l0\";
+#endif
+")
+
+;; We support two different ways of handling dispatch tables.
+;; The NeXT uses absolute tables, and other machines use relative.
+;; This define_expand can generate either kind.
+(define_expand "tablejump"
+ [(parallel [(set (pc) (match_operand 0 "" ""))
+ (use (label_ref (match_operand 1 "" "")))])]
+ ""
+ "
+{
+#ifdef CASE_VECTOR_PC_RELATIVE
+ operands[0] = gen_rtx (PLUS, SImode, pc_rtx, operands[0]);
+#endif
+}")
+
+;; Jump to variable address from dispatch table of absolute addresses.
+(define_insn ""
+ [(set (pc) (match_operand:SI 0 "register_operand" "a"))
+ (use (label_ref (match_operand 1 "" "")))]
+ ""
+ "*
+#ifdef MOTOROLA
+ return \"jmp (%0)\";
+#else
+ return \"jmp %0@\";
+#endif
+")
+
+;; Jump to variable address from dispatch table of relative addresses.
+(define_insn ""
+ [(set (pc)
+ (plus:SI (pc) (match_operand:HI 0 "register_operand" "r")))
+ (use (label_ref (match_operand 1 "" "")))]
+ ""
+ "*
+#ifdef ASM_RETURN_CASE_JUMP
+ ASM_RETURN_CASE_JUMP;
+#else
+#ifdef SGS
+#ifdef ASM_OUTPUT_CASE_LABEL
+ return \"jmp 6(%%pc,%0.w)\";
+#else
+#ifdef CRDS
+ return \"jmp 2(pc,%0.w)\";
+#else
+ return \"jmp 2(%%pc,%0.w)\";
+#endif /* end !CRDS */
+#endif
+#else /* not SGS */
+#ifdef MOTOROLA
+ return \"jmp (2,pc,%0.w)\";
+#else
+ return \"jmp pc@(2,%0:w)\";
+#endif
+#endif
+#endif
+")
+
+;; Decrement-and-branch insns.
+(define_insn ""
+ [(set (pc)
+ (if_then_else
+ (ne (match_operand:HI 0 "general_operand" "+g")
+ (const_int 0))
+ (label_ref (match_operand 1 "" ""))
+ (pc)))
+ (set (match_dup 0)
+ (plus:HI (match_dup 0)
+ (const_int -1)))]
+ ""
+ "*
+{
+ CC_STATUS_INIT;
+ if (DATA_REG_P (operands[0]))
+ return \"dbra %0,%l1\";
+ if (GET_CODE (operands[0]) == MEM)
+ {
+#ifdef MOTOROLA
+#ifdef NO_ADDSUB_Q
+ return \"sub%.w %#1,%0\;jbcc %l1\";
+#else
+ return \"subq%.w %#1,%0\;jbcc %l1\";
+#endif
+#else /* not MOTOROLA */
+ return \"subqw %#1,%0\;jcc %l1\";
+#endif
+ }
+#ifdef MOTOROLA
+#ifdef SGS_CMP_ORDER
+#ifndef NO_ADDSUB_Q
+ return \"sub%.w %#1,%0\;cmp%.w %0,%#-1\;jbne %l1\";
+#else
+ return \"subq%.w %#1,%0\;cmp%.w %0,%#-1\;jbne %l1\";
+#endif
+#else /* not SGS_CMP_ORDER */
+ return \"subq%.w %#1,%0\;cmp%.w %#-1,%0\;jbne %l1\";
+#endif
+#else /* not MOTOROLA */
+ return \"subqw %#1,%0\;cmpw %#-1,%0\;jne %l1\";
+#endif
+}")
+
+(define_insn ""
+ [(set (pc)
+ (if_then_else
+ (ne (match_operand:SI 0 "general_operand" "+g")
+ (const_int 0))
+ (label_ref (match_operand 1 "" ""))
+ (pc)))
+ (set (match_dup 0)
+ (plus:SI (match_dup 0)
+ (const_int -1)))]
+ ""
+ "*
+{
+ CC_STATUS_INIT;
+#ifdef MOTOROLA
+#ifndef NO_ADDSUB_Q
+ if (DATA_REG_P (operands[0]))
+ return \"dbra %0,%l1\;clr%.w %0\;sub%.l %#1,%0\;jbcc %l1\";
+ if (GET_CODE (operands[0]) == MEM)
+ return \"sub%.l %#1,%0\;jbcc %l1\";
+#else
+ if (DATA_REG_P (operands[0]))
+ return \"dbra %0,%l1\;clr%.w %0\;subq%.l %#1,%0\;jbcc %l1\";
+ if (GET_CODE (operands[0]) == MEM)
+ return \"subq%.l %#1,%0\;jbcc %l1\";
+#endif /* not NO_ADDSUB_Q */
+#ifdef SGS_CMP_ORDER
+#ifndef NO_ADDSUB_Q
+ return \"sub.l %#1,%0\;cmp.l %0,%#-1\;jbne %l1\";
+#else
+ return \"subq.l %#1,%0\;cmp.l %0,%#-1\;jbne %l1\";
+#endif
+#else /* not SGS_CMP_ORDER */
+ return \"subq.l %#1,%0\;cmp.l %#-1,%0\;jbne %l1\";
+#endif /* not SGS_CMP_ORDER */
+#else /* not MOTOROLA */
+ if (DATA_REG_P (operands[0]))
+ return \"dbra %0,%l1\;clrw %0\;subql %#1,%0\;jcc %l1\";
+ if (GET_CODE (operands[0]) == MEM)
+ return \"subql %#1,%0\;jcc %l1\";
+ return \"subql %#1,%0\;cmpl %#-1,%0\;jne %l1\";
+#endif /* not MOTOROLA */
+}")
+
+;; dbra patterns that use REG_NOTES info generated by strength_reduce.
+
+(define_insn "decrement_and_branch_until_zero"
+ [(set (pc)
+ (if_then_else
+ (gt (match_operand:SI 0 "general_operand" "+g")
+ (const_int 0))
+ (label_ref (match_operand 1 "" ""))
+ (pc)))
+ (set (match_dup 0)
+ (plus:SI (match_dup 0)
+ (const_int -1)))]
+ "find_reg_note (insn, REG_NONNEG, 0)"
+ "*
+{
+ CC_STATUS_INIT;
+#ifdef MOTOROLA
+#ifndef NO_ADDSUB_Q
+ if (DATA_REG_P (operands[0]))
+ return \"dbra %0,%l1\;clr%.w %0\;sub%.l %#1,%0\;jbcc %l1\";
+ if (GET_CODE (operands[0]) == MEM)
+ return \"sub%.l %#1,%0\;jbcc %l1\";
+#else
+ if (DATA_REG_P (operands[0]))
+ return \"dbra %0,%l1\;clr%.w %0\;subq%.l %#1,%0\;jbcc %l1\";
+ if (GET_CODE (operands[0]) == MEM)
+ return \"subq%.l %#1,%0\;jbcc %l1\";
+#endif
+#ifdef SGS_CMP_ORDER
+#ifndef NO_ADDSUB_Q
+ return \"sub.l %#1,%0\;cmp.l %0,%#-1\;jbne %l1\";
+#else
+ return \"subq.l %#1,%0\;cmp.l %0,%#-1\;jbne %l1\";
+#endif
+#else /* not SGS_CMP_ORDER */
+ return \"subq.l %#1,%0\;cmp.l %#-1,%0\;jbne %l1\";
+#endif /* not SGS_CMP_ORDER */
+#else /* not MOTOROLA */
+ if (DATA_REG_P (operands[0]))
+ return \"dbra %0,%l1\;clrw %0\;subql %#1,%0\;jcc %l1\";
+ if (GET_CODE (operands[0]) == MEM)
+ return \"subql %#1,%0\;jcc %l1\";
+ return \"subql %#1,%0\;cmpl %#-1,%0\;jne %l1\";
+#endif /* not MOTOROLA */
+}")
+
+
+;; PIC calls are handled by loading the address of the function into a
+;; register (via movsi), then emitting a register indirect call using
+;; the "jsr" function call syntax.
+;;
+;; It is important to note that the "jsr" syntax is always used for
+;; PIC calls, even on machines in which GCC normally uses the "jbsr"
+;; syntax for non-PIC calls. This keeps at least 1 assembler (Sun)
+;; from emitting incorrect code for a PIC call.
+;;
+;; We have different patterns for PIC calls and non-PIC calls. The
+;; different patterns are only used to choose the right syntax
+;; ("jsr" vs "jbsr").
+
+;; Call subroutine with no return value.
+(define_expand "call"
+ [(call (match_operand:QI 0 "memory_operand" "")
+ (match_operand:SI 1 "general_operand" ""))]
+ ;; Operand 1 not really used on the m68000.
+
+ ""
+ "
+{
+ if (flag_pic && GET_CODE (XEXP (operands[0], 0)) == SYMBOL_REF)
+ operands[0] = gen_rtx (MEM, GET_MODE (operands[0]),
+ force_reg (Pmode, XEXP (operands[0], 0)));
+}")
+
+;; This is a normal call sequence.
+(define_insn ""
+ [(call (match_operand:QI 0 "memory_operand" "o")
+ (match_operand:SI 1 "general_operand" "g"))]
+ ;; Operand 1 not really used on the m68000.
+
+ "! flag_pic"
+ "*
+#ifdef MOTOROLA
+ return \"jsr %0\";
+#else
+ return \"jbsr %0\";
+#endif
+")
+
+;; This is a PIC call sequence.
+(define_insn ""
+ [(call (match_operand:QI 0 "memory_operand" "o")
+ (match_operand:SI 1 "general_operand" "g"))]
+ ;; Operand 1 not really used on the m68000.
+
+ "flag_pic"
+ "*
+ return \"jsr %0\";
+")
+
+;; Call subroutine, returning value in operand 0
+;; (which must be a hard register).
+;; See comments before "call" regarding PIC calls.
+(define_expand "call_value"
+ [(set (match_operand 0 "" "")
+ (call (match_operand:QI 1 "memory_operand" "")
+ (match_operand:SI 2 "general_operand" "")))]
+ ;; Operand 2 not really used on the m68000.
+ ""
+ "
+{
+ if (flag_pic && GET_CODE (XEXP (operands[1], 0)) == SYMBOL_REF)
+ operands[1] = gen_rtx (MEM, GET_MODE (operands[1]),
+ force_reg (Pmode, XEXP (operands[1], 0)));
+}")
+
+;; This is a normal call_value
+(define_insn ""
+ [(set (match_operand 0 "" "=rf")
+ (call (match_operand:QI 1 "memory_operand" "o")
+ (match_operand:SI 2 "general_operand" "g")))]
+ ;; Operand 2 not really used on the m68000.
+ "! flag_pic"
+ "*
+#ifdef MOTOROLA
+ return \"jsr %1\";
+#else
+ return \"jbsr %1\";
+#endif
+")
+
+;; This is a PIC call_value
+(define_insn ""
+ [(set (match_operand 0 "" "=rf")
+ (call (match_operand:QI 1 "memory_operand" "o")
+ (match_operand:SI 2 "general_operand" "g")))]
+ ;; Operand 2 not really used on the m68000.
+ "flag_pic"
+ "*
+ return \"jsr %1\";
+")
+
+(define_insn "nop"
+ [(const_int 0)]
+ ""
+ "nop")
+
+(define_insn "probe"
+ [(reg:SI 15)]
+ "NEED_PROBE"
+ "*
+{
+ operands[0] = gen_rtx (PLUS, SImode, stack_pointer_rtx,
+ gen_rtx (CONST_INT, VOIDmode, NEED_PROBE));
+ return \"tstl %0\";
+}")
+
+;; Used for framless functions which save no regs and allocate no locals.
+(define_insn "return"
+ [(return)]
+ "USE_RETURN_INSN"
+ "*
+{
+ if (current_function_pops_args == 0)
+ return \"rts\";
+ operands[0] = gen_rtx (CONST_INT, VOIDmode, current_function_pops_args);
+ return \"rtd %0\";
+}")
+
+(define_insn "indirect_jump"
+ [(set (pc) (match_operand:SI 0 "register_operand" "a"))]
+ ""
+ "*
+#ifdef MOTOROLA
+ return \"jmp (%0)\";
+#else
+ return \"jmp %0@\";
+#endif
+")
+\f
+;; This should not be used unless the add/sub insns can't be.
+
+(define_insn ""
+ [(set (match_operand:SI 0 "general_operand" "=a")
+ (match_operand:QI 1 "address_operand" "p"))]
+ ""
+ "lea %a1,%0")
+\f
+;; This is the first machine-dependent peephole optimization.
+;; It is useful when a floating value is returned from a function call
+;; and then is moved into an FP register.
+;; But it is mainly intended to test the support for these optimizations.
+
+(define_peephole
+ [(set (reg:SI 15) (plus:SI (reg:SI 15) (const_int 4)))
+ (set (match_operand:DF 0 "register_operand" "f")
+ (match_operand:DF 1 "register_operand" "ad"))]
+ "FP_REG_P (operands[0]) && ! FP_REG_P (operands[1])"
+ "*
+{
+ rtx xoperands[2];
+ xoperands[1] = gen_rtx (REG, SImode, REGNO (operands[1]) + 1);
+ output_asm_insn (\"move%.l %1,%@\", xoperands);
+ output_asm_insn (\"move%.l %1,%-\", operands);
+ return \"fmove%.d %+,%0\";
+}
+")
+
+;; Optimize a stack-adjust followed by a push of an argument.
+;; This is said to happen frequently with -msoft-float
+;; when there are consecutive library calls.
+
+(define_peephole
+ [(set (reg:SI 15) (plus:SI (reg:SI 15)
+ (match_operand:SI 0 "immediate_operand" "n")))
+ (set (match_operand:SF 1 "push_operand" "=m")
+ (match_operand:SF 2 "general_operand" "rmfF"))]
+ "GET_CODE (operands[0]) == CONST_INT && INTVAL (operands[0]) >= 4
+ && ! reg_mentioned_p (stack_pointer_rtx, operands[2])"
+ "*
+{
+ if (INTVAL (operands[0]) > 4)
+ {
+ rtx xoperands[2];
+ xoperands[0] = stack_pointer_rtx;
+ xoperands[1] = gen_rtx (CONST_INT, VOIDmode, INTVAL (operands[0]) - 4);
+#ifndef NO_ADDSUB_Q
+ if (INTVAL (xoperands[1]) <= 8)
+ output_asm_insn (\"addq%.w %1,%0\", xoperands);
+ else if (INTVAL (xoperands[1]) <= 16 && TARGET_68020)
+ {
+ xoperands[1] = gen_rtx (CONST_INT, VOIDmode,
+ INTVAL (xoperands[1]) - 8);
+ output_asm_insn (\"addq%.w %#8,%0; addq%.w %1,%0\", xoperands);
+ }
+ else
+#endif
+ if (INTVAL (xoperands[1]) <= 0x7FFF)
+ output_asm_insn (\"add%.w %1,%0\", xoperands);
+ else
+ output_asm_insn (\"add%.l %1,%0\", xoperands);
+ }
+ if (FP_REG_P (operands[2]))
+ return \"fmove%.s %2,%@\";
+ return \"move%.l %2,%@\";
+}")
+
+;; Speed up stack adjust followed by a fullword fixedpoint push.
+
+(define_peephole
+ [(set (reg:SI 15) (plus:SI (reg:SI 15)
+ (match_operand:SI 0 "immediate_operand" "n")))
+ (set (match_operand:SI 1 "push_operand" "=m")
+ (match_operand:SI 2 "general_operand" "g"))]
+ "GET_CODE (operands[0]) == CONST_INT && INTVAL (operands[0]) >= 4
+ && ! reg_mentioned_p (stack_pointer_rtx, operands[2])"
+ "*
+{
+ if (INTVAL (operands[0]) > 4)
+ {
+ rtx xoperands[2];
+ xoperands[0] = stack_pointer_rtx;
+ xoperands[1] = gen_rtx (CONST_INT, VOIDmode, INTVAL (operands[0]) - 4);
+#ifndef NO_ADDSUB_Q
+ if (INTVAL (xoperands[1]) <= 8)
+ output_asm_insn (\"addq%.w %1,%0\", xoperands);
+ else if (INTVAL (xoperands[1]) <= 16 && TARGET_68020)
+ {
+ xoperands[1] = gen_rtx (CONST_INT, VOIDmode,
+ INTVAL (xoperands[1]) - 8);
+ output_asm_insn (\"addq%.w %#8,%0; addq%.w %1,%0\", xoperands);
+ }
+ else
+#endif
+ if (INTVAL (xoperands[1]) <= 0x7FFF)
+ output_asm_insn (\"add%.w %1,%0\", xoperands);
+ else
+ output_asm_insn (\"add%.l %1,%0\", xoperands);
+ }
+ if (operands[2] == const0_rtx)
+ return \"clr%.l %@\";
+ return \"move%.l %2,%@\";
+}")
+
+;; Speed up pushing a single byte but leaving four bytes of space.
+
+(define_peephole
+ [(set (mem:QI (pre_dec:SI (reg:SI 15)))
+ (match_operand:QI 1 "general_operand" "dami"))
+ (set (reg:SI 15) (minus:SI (reg:SI 15) (const_int 2)))]
+ "! reg_mentioned_p (stack_pointer_rtx, operands[1])"
+ "*
+{
+ rtx xoperands[4];
+
+ if (GET_CODE (operands[1]) == REG)
+ return \"move%.l %1,%-\";
+
+ xoperands[1] = operands[1];
+ xoperands[2]
+ = gen_rtx (MEM, QImode,
+ gen_rtx (PLUS, VOIDmode, stack_pointer_rtx,
+ gen_rtx (CONST_INT, VOIDmode, 3)));
+ xoperands[3] = stack_pointer_rtx;
+ output_asm_insn (\"subq%.w %#4,%3\;move%.b %1,%2\", xoperands);
+ return \"\";
+}")
+\f
+;; FPA multiply and add.
+(define_insn ""
+ [(set (match_operand:DF 0 "register_operand" "=x,y,y")
+ (plus:DF (mult:DF (match_operand:DF 1 "general_operand" "%x,dmF,y")
+ (match_operand:DF 2 "general_operand" "xH,y,y"))
+ (match_operand:DF 3 "general_operand" "xH,y,dmF")))]
+ "TARGET_FPA"
+ "@
+ fpma%.d %1,%w2,%w3,%0
+ fpma%.d %x1,%x2,%x3,%0
+ fpma%.d %x1,%x2,%x3,%0")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "register_operand" "=x,y,y")
+ (plus:SF (mult:SF (match_operand:SF 1 "general_operand" "%x,ydmF,y")
+ (match_operand:SF 2 "general_operand" "xH,y,ydmF"))
+ (match_operand:SF 3 "general_operand" "xH,ydmF,ydmF")))]
+ "TARGET_FPA"
+ "@
+ fpma%.s %1,%w2,%w3,%0
+ fpma%.s %1,%2,%3,%0
+ fpma%.s %1,%2,%3,%0")
+
+;; FPA Multiply and subtract
+(define_insn ""
+ [(set (match_operand:DF 0 "register_operand" "=x,y,y")
+ (minus:DF (match_operand:DF 1 "general_operand" "xH,rmF,y")
+ (mult:DF (match_operand:DF 2 "general_operand" "%xH,y,y")
+ (match_operand:DF 3 "general_operand" "x,y,rmF"))))]
+ "TARGET_FPA"
+ "@
+ fpms%.d %3,%w2,%w1,%0
+ fpms%.d %x3,%2,%x1,%0
+ fpms%.d %x3,%2,%x1,%0")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "register_operand" "=x,y,y")
+ (minus:SF (match_operand:SF 1 "general_operand" "xH,rmF,yrmF")
+ (mult:SF (match_operand:SF 2 "general_operand" "%xH,rmF,y")
+ (match_operand:SF 3 "general_operand" "x,y,yrmF"))))]
+ "TARGET_FPA"
+ "@
+ fpms%.s %3,%w2,%w1,%0
+ fpms%.s %3,%2,%1,%0
+ fpms%.s %3,%2,%1,%0")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "register_operand" "=x,y,y")
+ (minus:DF (mult:DF (match_operand:DF 1 "general_operand" "%xH,y,y")
+ (match_operand:DF 2 "general_operand" "x,y,rmF"))
+ (match_operand:DF 3 "general_operand" "xH,rmF,y")))]
+ "TARGET_FPA"
+ "@
+ fpmr%.d %2,%w1,%w3,%0
+ fpmr%.d %x2,%1,%x3,%0
+ fpmr%.d %x2,%1,%x3,%0")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "register_operand" "=x,y,y")
+ (minus:SF (mult:SF (match_operand:SF 1 "general_operand" "%xH,rmF,y")
+ (match_operand:SF 2 "general_operand" "x,y,yrmF"))
+ (match_operand:SF 3 "general_operand" "xH,rmF,yrmF")))]
+ "TARGET_FPA"
+ "@
+ fpmr%.s %2,%w1,%w3,%0
+ fpmr%.s %x2,%1,%x3,%0
+ fpmr%.s %x2,%1,%x3,%0")
+
+;; FPA Add and multiply
+(define_insn ""
+ [(set (match_operand:DF 0 "register_operand" "=x,y,y")
+ (mult:DF (plus:DF (match_operand:DF 1 "general_operand" "%xH,y,y")
+ (match_operand:DF 2 "general_operand" "x,y,rmF"))
+ (match_operand:DF 3 "general_operand" "xH,rmF,y")))]
+ "TARGET_FPA"
+ "@
+ fpam%.d %2,%w1,%w3,%0
+ fpam%.d %x2,%1,%x3,%0
+ fpam%.d %x2,%1,%x3,%0")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "register_operand" "=x,y,y")
+ (mult:SF (plus:SF (match_operand:SF 1 "general_operand" "%xH,rmF,y")
+ (match_operand:SF 2 "general_operand" "x,y,yrmF"))
+ (match_operand:SF 3 "general_operand" "xH,rmF,yrmF")))]
+ "TARGET_FPA"
+ "@
+ fpam%.s %2,%w1,%w3,%0
+ fpam%.s %x2,%1,%x3,%0
+ fpam%.s %x2,%1,%x3,%0")
+
+;;FPA Subtract and multiply
+(define_insn ""
+ [(set (match_operand:DF 0 "register_operand" "=x,y,y")
+ (mult:DF (minus:DF (match_operand:DF 1 "general_operand" "xH,y,y")
+ (match_operand:DF 2 "general_operand" "x,y,rmF"))
+ (match_operand:DF 3 "general_operand" "xH,rmF,y")))]
+ "TARGET_FPA"
+ "@
+ fpsm%.d %2,%w1,%w3,%0
+ fpsm%.d %x2,%1,%x3,%0
+ fpsm%.d %x2,%1,%x3,%0")
+
+(define_insn ""
+ [(set (match_operand:DF 0 "register_operand" "=x,y,y")
+ (mult:DF (match_operand:DF 1 "general_operand" "xH,rmF,y")
+ (minus:DF (match_operand:DF 2 "general_operand" "xH,y,y")
+ (match_operand:DF 3 "general_operand" "x,y,rmF"))))]
+ "TARGET_FPA"
+ "@
+ fpsm%.d %3,%w2,%w1,%0
+ fpsm%.d %x3,%2,%x1,%0
+ fpsm%.d %x3,%2,%x1,%0")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "register_operand" "=x,y,y")
+ (mult:SF (minus:SF (match_operand:SF 1 "general_operand" "xH,rmF,y")
+ (match_operand:SF 2 "general_operand" "x,y,yrmF"))
+ (match_operand:SF 3 "general_operand" "xH,rmF,yrmF")))]
+ "TARGET_FPA"
+ "@
+ fpsm%.s %2,%w1,%w3,%0
+ fpsm%.s %x2,%1,%x3,%0
+ fpsm%.s %x2,%1,%x3,%0")
+
+(define_insn ""
+ [(set (match_operand:SF 0 "register_operand" "=x,y,y")
+ (mult:SF (match_operand:SF 1 "general_operand" "xH,rmF,yrmF")
+ (minus:SF (match_operand:SF 2 "general_operand" "xH,rmF,y")
+ (match_operand:SF 3 "general_operand" "x,y,yrmF"))))]
+ "TARGET_FPA"
+ "@
+ fpsm%.s %3,%w2,%w1,%0
+ fpsm%.s %x3,%2,%x1,%0
+ fpsm%.s %x3,%2,%x1,%0")
+\f
+;;- Local variables:
+;;- mode:emacs-lisp
+;;- comment-start: ";;- "
+;;- comment-start-skip: ";+- *"
+;;- eval: (set-syntax-table (copy-sequence (syntax-table)))
+;;- eval: (modify-syntax-entry ?[ "(]")
+;;- eval: (modify-syntax-entry ?] ")[")
+;;- eval: (modify-syntax-entry ?{ "(}")
+;;- eval: (modify-syntax-entry ?} "){")
+;;- End: