help
mkdosfs was renamed upstream to mkfs.fat for consistency.
+config BR2_ELF2FLT
+ bool "the elf2flt option has been renamed"
+ select BR2_LEGACY
+ help
+ The BR2_ELF2FLT option has been renamed to
+ BR2_PACKAGE_HOST_ELF2FLT due to the conversion of elf2flt to
+ the package infrastructure.
+
###############################################################################
comment "Legacy options removed in 2013.05"
--- /dev/null
+config BR2_PACKAGE_HOST_ELF2FLT
+ bool "Enable elf2flt support?"
+ depends on BR2_arm || BR2_sh || BR2_sparc
+ help
+ uCLinux uses a Binary Flat format commonly known as BFLT. It
+ is a relatively simple and lightweight executable format
+ based on the original a.out format.
+
+ This option compiles the required tools and makes the required
+ modifications on your toolchain (linker).
--- /dev/null
+#############################################################
+#
+# elf2flt
+#
+#############################################################
+
+ELF2FLT_SOURCE =
+HOST_ELF2FLT_SOURCE =
+ELF2FLT_VERSION = cvs
+ELF2FLT_LICENSE = GPLv2+
+ELF2FLT_LICENSE_FILES = LICENSE.TXT
+
+HOST_ELF2FLT_DEPENDENCIES = host-binutils host-zlib
+
+# It is not exactly a host variant, but more a cross variant, which is
+# why we pass a special --target option.
+HOST_ELF2FLT_CONF_OPT = \
+ --with-bfd-include-dir=$(HOST_BINUTILS_DIR)/bfd/ \
+ --with-binutils-include-dir=$(HOST_BINUTILS_DIR)/include/ \
+ --with-libbfd=$(HOST_BINUTILS_DIR)/bfd/libbfd.a \
+ --with-libiberty=$(HOST_BINUTILS_DIR)/libiberty/libiberty.a \
+ --target=$(GNU_TARGET_NAME)
+
+define HOST_ELF2FLT_EXTRACT_CMDS
+ cp -r package/elf2flt/src/* $(@D)
+endef
+
+$(eval $(host-autotools-package))
--- /dev/null
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+\f
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+\f
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+\f
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+\f
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+\f
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
--- /dev/null
+srcdir = @srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+libdir = @libdir@
+includedir = @includedir@
+
+CC = @CC@
+CPU = @target_cpu@
+TARGET = @target_alias@
+CFLAGS = @CFLAGS@
+INCLUDES = @bfd_include_dir@ @binutils_include_dir@
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+INSTALL = @INSTALL@
+DEFS = @DEFS@ -DTARGET_$(CPU)
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+
+HOST = @host_alias@
+
+ifneq (,$(findstring mingw32,$(HOST)))
+ LIBS := $(LIBS) -lws2_32
+endif
+
+# force link order under cygwin to avoid getopts / libiberty clash
+ifneq ($(strip $(shell gcc -v 2>&1 | grep "cygwin")),)
+ LIBS := -lcygwin $(LIBS)
+endif
+
+CCFLAGS = $(CFLAGS) $(DEFS) $(INCLUDES)
+
+LDFILE= elf2flt.ld
+ifeq ($(strip $(CPU)),e1)
+SRC_LDFILE= $(CPU)-elf2flt.ld
+else
+SRC_LDFILE= elf2flt.ld
+endif
+
+target_bindir = $(prefix)/$(TARGET)/bin
+target_libdir = $(prefix)/$(TARGET)/lib
+
+
+PROG_ELF2FLT = elf2flt$(EXEEXT)
+PROG_FLTHDR = flthdr$(EXEEXT)
+PROGS = $(PROG_ELF2FLT) $(PROG_FLTHDR)
+
+all: $(PROGS)
+
+$(PROG_ELF2FLT): elf2flt.c stubs.c Makefile
+ $(CC) $(CCFLAGS) $(LDFLAGS) -o $@ $(srcdir)/elf2flt.c $(srcdir)/stubs.c $(LIBS)
+
+$(PROG_FLTHDR): flthdr.c Makefile
+ $(CC) $(CCFLAGS) $(LDFLAGS) -o $@ $(srcdir)/flthdr.c $(LIBS)
+
+clean:
+ -rm -f $(PROGS) *.$(OBJEXT)
+
+distclean: clean
+ -rm -f Makefile config.log config.status config.cache ld-elf2flt
+
+install:
+ $(INSTALL) -d $(bindir)
+ $(INSTALL) -d $(target_bindir)
+ $(INSTALL) -d $(target_libdir)
+ $(INSTALL) -m 755 $(PROG_FLTHDR) $(bindir)/$(TARGET)-$(PROG_FLTHDR)
+ $(INSTALL) -m 755 $(PROG_FLTHDR) $(target_bindir)/$(PROG_FLTHDR)
+ $(INSTALL) -m 755 $(PROG_ELF2FLT) $(bindir)/$(TARGET)-$(PROG_ELF2FLT)
+ $(INSTALL) -m 755 $(PROG_ELF2FLT) $(target_bindir)/$(PROG_ELF2FLT)
+ [ -f $(bindir)/$(TARGET)-ld.real$(EXEEXT) ] || \
+ mv $(bindir)/$(TARGET)-ld$(EXEEXT) $(bindir)/$(TARGET)-ld.real$(EXEEXT)
+ [ -f $(target_bindir)/ld.real$(EXEEXT) ] || \
+ mv $(target_bindir)/ld$(EXEEXT) $(target_bindir)/ld.real$(EXEEXT)
+ $(INSTALL) -m 755 ld-elf2flt $(bindir)/$(TARGET)-ld
+ $(INSTALL) -m 755 ld-elf2flt $(target_bindir)/ld
+ $(INSTALL) -m 644 $(srcdir)/$(SRC_LDFILE) $(target_libdir)/$(LDFILE)
+
+
--- /dev/null
+
+README - elf2flt
+----------------
+
+Copyright (C) 2001-2003, SnapGear (www.snapgear.com)
+davidm@snapgear.com
+gerg@snapgear.com
+
+This is Free Software, under the GNU Public Licence v2 or greater. See
+LICENSE.TXT for more details.
+
+Elf2flt with PIC, ZFLAT and full reloc support. Currently supported
+targets include: m68k/ColdFire, ARM, Sparc, NEC v850, MicroBlaze,
+h8300 and SuperH.
+
+COMPILING:
+
+You need an appropriate libbfd.a and libiberty.a for your target to
+build this tool. They are normally part of the binutils package.
+
+To compile elf2flt do:
+
+ ./configure --target=<ARCH> --with-libbfd=<libbfd.a> --with-libiberty=<libiberty.a>
+ make
+ make install
+
+The <ARCH> argument to configure specifies what the target architecture is.
+This should be the same target as you used to build the binutils and gcc
+cross development tools. The --with-libbfd and --with-libiberty arguments
+specify where the libbfd.a and libiberty.a library files are to use.
+
+
+FILES:
+
+README - this file
+configure - autoconf configuration shell script
+configure.in- original autoconf file
+config.* - autoconf support scripts
+Makefile.in - Makefile template used by configure
+elf2flt.c - the source
+flthdr.c - flat header manipulation program
+flat.h - header from uClinux kernel sources
+elf2flt.ld - an example linker script that works for C/C++ and uClinux
+ld-elf2flt - A linker replacement that implements a -elf2flt option for the
+ linker and runs elf2flt automatically for you. It auto
+ detects PIC/non-PIC code and adjusts its option accordingly.
+ It uses the environment variable FLTFLAGS when running
+ elf2flt. It runs /.../m68k-elf-ld.real to do the actual
+ linking.
+
+TIPS:
+
+The ld-elf2flt produces 2 files as output. The binary flat file X, and
+X.gdb which is used for debugging and PIC purposes.
+
+The '-p' option requires an elf executable linked at address 0. The
+elf2flt.ld provided will generate the correct format binary when linked
+with the real linker with *no* '-r' option for the linker.
+
+The '-r' flag can be added to PIC builds to get contiguous code/data. This
+is good for loading application symbols into gdb (add-symbol-file XXX.gdb).
+
--- /dev/null
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+
+timestamp='2003-10-16'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Per Bothner <per@bothner.com>.
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub. If it succeeds, it prints the system name on stdout, and
+# exits with 0. Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit build system type.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit 0 ;;
+ --version | -v )
+ echo "$version" ; exit 0 ;;
+ --help | --h* | -h )
+ echo "$usage"; exit 0 ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+ case "${UNAME_MACHINE_ARCH}" in
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ eval $set_cc_for_build
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep __ELF__ >/dev/null
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # The OS release
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit 0 ;;
+ amiga:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ arc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ hp300:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mac68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ macppc:OpenBSD:*:*)
+ echo powerpc-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme88k:OpenBSD:*:*)
+ echo m88k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvmeppc:OpenBSD:*:*)
+ echo powerpc-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ pmax:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sgi:OpenBSD:*:*)
+ echo mipseb-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sun3:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ wgrisc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ *:OpenBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ alpha:OSF1:*:*)
+ if test $UNAME_RELEASE = "V4.0"; then
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ fi
+ # According to Compaq, /usr/sbin/psrinfo has been available on
+ # OSF/1 and Tru64 systems produced since 1995. I hope that
+ # covers most systems running today. This code pipes the CPU
+ # types through head -n 1, so we only detect the type of CPU 0.
+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+ case "$ALPHA_CPU_TYPE" in
+ "EV4 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "EV4.5 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "LCA4 (21066/21068)")
+ UNAME_MACHINE="alpha" ;;
+ "EV5 (21164)")
+ UNAME_MACHINE="alphaev5" ;;
+ "EV5.6 (21164A)")
+ UNAME_MACHINE="alphaev56" ;;
+ "EV5.6 (21164PC)")
+ UNAME_MACHINE="alphapca56" ;;
+ "EV5.7 (21164PC)")
+ UNAME_MACHINE="alphapca57" ;;
+ "EV6 (21264)")
+ UNAME_MACHINE="alphaev6" ;;
+ "EV6.7 (21264A)")
+ UNAME_MACHINE="alphaev67" ;;
+ "EV6.8CB (21264C)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8AL (21264B)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8CX (21264D)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.9A (21264/EV69A)")
+ UNAME_MACHINE="alphaev69" ;;
+ "EV7 (21364)")
+ UNAME_MACHINE="alphaev7" ;;
+ "EV7.9 (21364A)")
+ UNAME_MACHINE="alphaev79" ;;
+ esac
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ exit 0 ;;
+ Alpha*:OpenVMS:*:*)
+ echo alpha-hp-vms
+ exit 0 ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+ exit 0 ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit 0 ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit 0;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit 0 ;;
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-morphos
+ exit 0 ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit 0 ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit 0 ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit 0;;
+ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit 0;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit 0 ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit 0 ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+ exit 0 ;;
+ DRS?6000:UNIX_SV:4.2*:7*)
+ case `/usr/bin/uname -p` in
+ sparc) echo sparc-icl-nx7 && exit 0 ;;
+ esac ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ i86pc:SunOS:5.*:*)
+ echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit 0 ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit 0 ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+ exit 0 ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit 0 ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit 0 ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit 0 ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit 0 ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit 0 ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit 0 ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit 0 ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit 0 ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit 0 ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c \
+ && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+ && exit 0
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit 0 ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+ exit 0 ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+ exit 0 ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+ echo powerpc-harris-powermax
+ exit 0 ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit 0 ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit 0 ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit 0 ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit 0 ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+ then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit 0 ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit 0 ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit 0 ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit 0 ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit 0 ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i*86:AIX:*:*)
+ echo i386-ibm-aix
+ exit 0 ;;
+ ia64:AIX:*:*)
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+ exit 0 ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+ echo rs6000-ibm-aix3.2.5
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit 0 ;;
+ *:AIX:*:[45])
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit 0 ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit 0 ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit 0 ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit 0 ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit 0 ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit 0 ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit 0 ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit 0 ;;
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+ if [ -x /usr/bin/getconf ]; then
+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
+ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ esac ;;
+ esac
+ fi
+ if [ "${HP_ARCH}" = "" ]; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ test -z "$HP_ARCH" && HP_ARCH=hppa
+ fi ;;
+ esac
+ if [ ${HP_ARCH} = "hppa2.0w" ]
+ then
+ # avoid double evaluation of $set_cc_for_build
+ test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
+ then
+ HP_ARCH="hppa2.0w"
+ else
+ HP_ARCH="hppa64"
+ fi
+ fi
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit 0 ;;
+ ia64:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux${HPUX_REV}
+ exit 0 ;;
+ 3050*:HI-UX:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+ echo unknown-hitachi-hiuxwe2
+ exit 0 ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit 0 ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit 0 ;;
+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit 0 ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit 0 ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit 0 ;;
+ i*86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+ exit 0 ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit 0 ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit 0 ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit 0 ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit 0 ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit 0 ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit 0 ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+ -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ *:UNICOS/mp:*:*)
+ echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit 0 ;;
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ *:FreeBSD:*:*)
+ # Determine whether the default compiler uses glibc.
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <features.h>
+ #if __GLIBC__ >= 2
+ LIBC=gnu
+ #else
+ LIBC=
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+ # GNU/KFreeBSD systems have a "k" prefix to indicate we are using
+ # FreeBSD's kernel, but not the complete OS.
+ case ${LIBC} in gnu) kernel_only='k' ;; esac
+ echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
+ exit 0 ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+ exit 0 ;;
+ i*:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+ exit 0 ;;
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit 0 ;;
+ x86:Interix*:[34]*)
+ echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
+ exit 0 ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
+ exit 0 ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i586-pc-interix
+ exit 0 ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit 0 ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit 0 ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ *:GNU:*:*)
+ # the GNU system
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit 0 ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ exit 0 ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+ exit 0 ;;
+ arm*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ cris:Linux:*:*)
+ echo cris-axis-linux-gnu
+ exit 0 ;;
+ ia64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ mips:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef mips
+ #undef mipsel
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=mipsel
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=mips
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+ ;;
+ mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef mips64
+ #undef mips64el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=mips64el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=mips64
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+ ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-gnu
+ exit 0 ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-gnu
+ exit 0 ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+ exit 0 ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+ PA7*) echo hppa1.1-unknown-linux-gnu ;;
+ PA8*) echo hppa2.0-unknown-linux-gnu ;;
+ *) echo hppa-unknown-linux-gnu ;;
+ esac
+ exit 0 ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-gnu
+ exit 0 ;;
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo ${UNAME_MACHINE}-ibm-linux
+ exit 0 ;;
+ sh64*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ sh*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ sparc:Linux:*:* | sparc64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ x86_64:Linux:*:*)
+ echo x86_64-unknown-linux-gnu
+ exit 0 ;;
+ i*86:Linux:*:*)
+ # The BFD linker knows what the default object file format is, so
+ # first see if it will tell us. cd to the root directory to prevent
+ # problems with other programs or directories called `ld' in the path.
+ # Set LC_ALL=C to ensure ld outputs messages in English.
+ ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
+ | sed -ne '/supported targets:/!d
+ s/[ ][ ]*/ /g
+ s/.*supported targets: *//
+ s/ .*//
+ p'`
+ case "$ld_supported_targets" in
+ elf32-i386)
+ TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+ ;;
+ a.out-i386-linux)
+ echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+ exit 0 ;;
+ coff-i386)
+ echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+ exit 0 ;;
+ "")
+ # Either a pre-BFD a.out linker (linux-gnuoldld) or
+ # one that does not give us useful --help.
+ echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+ exit 0 ;;
+ esac
+ # Determine whether the default compiler is a.out or elf
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <features.h>
+ #ifdef __ELF__
+ # ifdef __GLIBC__
+ # if __GLIBC__ >= 2
+ LIBC=gnu
+ # else
+ LIBC=gnulibc1
+ # endif
+ # else
+ LIBC=gnulibc1
+ # endif
+ #else
+ #ifdef __INTEL_COMPILER
+ LIBC=gnu
+ #else
+ LIBC=gnuaout
+ #endif
+ #endif
+ #ifdef __dietlibc__
+ LIBC=dietlibc
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+ test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
+ test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+ ;;
+ i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+ # earlier versions are messed up and put the nodename in both
+ # sysname and nodename.
+ echo i386-sequent-sysv4
+ exit 0 ;;
+ i*86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit 0 ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit 0 ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit 0 ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit 0 ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit 0 ;;
+ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+ exit 0 ;;
+ i*86:*:5:[78]*)
+ case `/bin/uname -X | grep "^Machine"` in
+ *486*) UNAME_MACHINE=i486 ;;
+ *Pentium) UNAME_MACHINE=i586 ;;
+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+ esac
+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+ exit 0 ;;
+ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit 0 ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i386.
+ echo i386-pc-msdosdjgpp
+ exit 0 ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit 0 ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit 0 ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit 0 ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit 0 ;;
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+ exit 0 ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit 0 ;;
+ M68*:*:R3V[567]*:*)
+ test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && echo i486-ncr-sysv4 && exit 0 ;;
+ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit 0 ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ rs6000:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+ echo powerpc-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit 0 ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit 0 ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit 0 ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit 0 ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit 0 ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes@openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit 0 ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit 0 ;;
+ *:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo hppa1.1-stratus-vos
+ exit 0 ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit 0 ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+ exit 0 ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit 0 ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit 0 ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit 0 ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+ *:Darwin:*:*)
+ case `uname -p` in
+ *86) UNAME_PROCESSOR=i686 ;;
+ powerpc) UNAME_PROCESSOR=powerpc ;;
+ esac
+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ exit 0 ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ UNAME_PROCESSOR=`uname -p`
+ if test "$UNAME_PROCESSOR" = "x86"; then
+ UNAME_PROCESSOR=i386
+ UNAME_MACHINE=pc
+ fi
+ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ exit 0 ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit 0 ;;
+ NSR-[DGKLNPTVWY]:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit 0 ;;
+ *:NonStop-UX:*:*)
+ echo mips-compaq-nonstopux
+ exit 0 ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit 0 ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ exit 0 ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+ # operating systems.
+ if test "$cputype" = "386"; then
+ UNAME_MACHINE=i386
+ else
+ UNAME_MACHINE="$cputype"
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit 0 ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+ exit 0 ;;
+ *:TENEX:*:*)
+ echo pdp10-unknown-tenex
+ exit 0 ;;
+ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+ echo pdp10-dec-tops20
+ exit 0 ;;
+ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+ echo pdp10-xkl-tops20
+ exit 0 ;;
+ *:TOPS-20:*:*)
+ echo pdp10-unknown-tops20
+ exit 0 ;;
+ *:ITS:*:*)
+ echo pdp10-unknown-its
+ exit 0 ;;
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux${UNAME_RELEASE}
+ exit 0 ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
+ I don't know.... */
+ printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+ printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+ "4"
+#else
+ ""
+#endif
+ ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+ printf ("arm-acorn-riscix"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+ printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+ int version;
+ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+ if (version < 4)
+ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+ else
+ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+ exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+ printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+ printf ("ns32k-encore-mach\n"); exit (0);
+#else
+ printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+ printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+ printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+ printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+ struct utsname un;
+
+ uname(&un);
+
+ if (strncmp(un.version, "V2", 2) == 0) {
+ printf ("i386-sequent-ptx2\n"); exit (0);
+ }
+ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+ printf ("i386-sequent-ptx1\n"); exit (0);
+ }
+ printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+# include <sys/param.h>
+# if defined (BSD)
+# if BSD == 43
+ printf ("vax-dec-bsd4.3\n"); exit (0);
+# else
+# if BSD == 199006
+ printf ("vax-dec-bsd4.3reno\n"); exit (0);
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# endif
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# else
+ printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+ printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+ exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+ case `getsysinfo -f cpu_type` in
+ c1*)
+ echo c1-convex-bsd
+ exit 0 ;;
+ c2*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit 0 ;;
+ c34*)
+ echo c34-convex-bsd
+ exit 0 ;;
+ c38*)
+ echo c38-convex-bsd
+ exit 0 ;;
+ c4*)
+ echo c4-convex-bsd
+ exit 0 ;;
+ esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+ ftp://ftp.gnu.org/pub/gnu/config/
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo = `(hostinfo) 2>/dev/null`
+/bin/universe = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
--- /dev/null
+#! /bin/sh
+# Configuration validation subroutine script.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+timestamp='2005-04-22'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine. It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit 0 ;;
+ --version | -v )
+ echo "$version" ; exit 0 ;;
+ --help | --h* | -h )
+ echo "$usage"; exit 0 ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit 0;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
+ kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis | -knuth | -cray)
+ os=
+ basic_machine=$1
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -chorusos*)
+ os=-chorusos
+ basic_machine=$1
+ ;;
+ -chorusrdb)
+ os=-chorusrdb
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ 1750a | 580 \
+ | a29k \
+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ | am33_2.0 \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+ | bfin \
+ | c4x | clipper \
+ | d10v | d30v | dlx | dsp16xx \
+ | fr30 | frv \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | i370 | i860 | i960 | ia64 \
+ | ip2k | iq2000 \
+ | m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+ | mips64vr | mips64vrel \
+ | mips64orion | mips64orionel \
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
+ | mipsisa64 | mipsisa64el \
+ | mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64sb1 | mipsisa64sb1el \
+ | mipsisa64sr71k | mipsisa64sr71kel \
+ | mipstx39 | mipstx39el \
+ | mn10200 | mn10300 \
+ | msp430 \
+ | nios | nios2 \
+ | ns16k | ns32k \
+ | openrisc | or32 \
+ | pdp10 | pdp11 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+ | pyramid \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
+ | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
+ | sparcv8 | sparcv9 | sparcv9b \
+ | strongarm \
+ | tahoe | thumb | tic4x | tic80 | tron \
+ | v850 | v850e \
+ | microblaze \
+ | we32k \
+ | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
+ | z8k)
+ basic_machine=$basic_machine-unknown
+ ;;
+ m32c)
+ basic_machine=$basic_machine-unknown
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12)
+ # Motorola 68HC11/12.
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i*86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ 580-* \
+ | a29k-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* \
+ | bfin-* | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+ | clipper-* | craynv-* | cydra-* \
+ | d10v-* | d30v-* | dlx-* \
+ | elxsi-* \
+ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+ | h8300-* | h8500-* \
+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | i*86-* | i860-* | i960-* | ia64-* \
+ | ip2k-* | iq2000-* \
+ | m32r-* | m32rle-* \
+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+ | mips64vr-* | mips64vrel-* \
+ | mips64orion-* | mips64orionel-* \
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa64-* | mipsisa64el-* \
+ | mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64sb1-* | mipsisa64sb1el-* \
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipstx39-* | mipstx39el-* \
+ | mmix-* \
+ | msp430-* \
+ | nios-* | nios2-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
+ | orion-* \
+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+ | pyramid-* \
+ | romp-* | rs6000-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* \
+ | sheb-* | shbe-* | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+ | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
+ | sparclite-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+ | tahoe-* | thumb-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+ | tron-* \
+ | v850-* | v850e-* | vax-* \
+ | we32k-* \
+ | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
+ | xstormy16-* | xtensa-* \
+ | ymp-* \
+ | z8k-*)
+ ;;
+ m32c-*)
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-unknown
+ os=-bsd
+ ;;
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ abacus)
+ basic_machine=abacus-unknown
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amd64)
+ basic_machine=x86_64-pc
+ ;;
+ amd64-*)
+ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-unknown
+ ;;
+ amigaos | amigados)
+ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-unknown
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ c90)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | j90)
+ basic_machine=j90-cray
+ os=-unicos
+ ;;
+ craynv)
+ basic_machine=craynv-cray
+ os=-unicosmp
+ ;;
+ cr16c)
+ basic_machine=cr16c-unknown
+ os=-elf
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ crisv32 | crisv32-* | etraxfs*)
+ basic_machine=crisv32-axis
+ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
+ crx)
+ basic_machine=crx-unknown
+ os=-elf
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ decsystem10* | dec10*)
+ basic_machine=pdp10-dec
+ os=-tops10
+ ;;
+ decsystem20* | dec20*)
+ basic_machine=pdp10-dec
+ os=-tops20
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ djgpp)
+ basic_machine=i586-pc
+ os=-msdosdjgpp
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ go32)
+ basic_machine=i386-pc
+ os=-go32
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ ;;
+# I'm not sure what "Sysv32" means. Should this be sysv3.2?
+ i*86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i*86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i*86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i*86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ i386-vsta | vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ mingw32)
+ basic_machine=i386-pc
+ os=-mingw32
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ morphos)
+ basic_machine=powerpc-unknown
+ os=-morphos
+ ;;
+ msdos)
+ basic_machine=i386-pc
+ os=-msdos
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ nonstopux)
+ basic_machine=mips-compaq
+ os=-nonstopux
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ or32 | or32-*)
+ basic_machine=or32-unknown
+ os=-coff
+ ;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2 | pentiumiii | pentium3)
+ basic_machine=i686-pc
+ ;;
+ pentium4)
+ basic_machine=i786-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium4-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=power-ibm
+ ;;
+ ppc) basic_machine=powerpc-unknown
+ ;;
+ ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64) basic_machine=powerpc64-unknown
+ ;;
+ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ basic_machine=powerpc64le-unknown
+ ;;
+ ppc64le-* | powerpc64little-*)
+ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ s390 | s390-*)
+ basic_machine=s390-ibm
+ ;;
+ s390x | s390x-*)
+ basic_machine=s390x-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sb1)
+ basic_machine=mipsisa64sb1-unknown
+ ;;
+ sb1el)
+ basic_machine=mipsisa64sb1el-unknown
+ ;;
+ sei)
+ basic_machine=mips-sei
+ os=-seiux
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparclite-wrs | simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ t3e)
+ basic_machine=alphaev5-cray
+ os=-unicos
+ ;;
+ t90)
+ basic_machine=t90-cray
+ os=-unicos
+ ;;
+ tic54x | c54x*)
+ basic_machine=tic54x-unknown
+ os=-coff
+ ;;
+ tic55x | c55x*)
+ basic_machine=tic55x-unknown
+ os=-coff
+ ;;
+ tic6x | c6x*)
+ basic_machine=tic6x-unknown
+ os=-coff
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ toad1)
+ basic_machine=pdp10-xkl
+ os=-tops20
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+ xbox)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ mmix)
+ basic_machine=mmix-knuth
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp10)
+ # there are many clones, so DEC is not a safe bet
+ basic_machine=pdp10-unknown
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele)
+ basic_machine=sh-unknown
+ ;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparc | sparcv8 | sparcv9 | sparcv9b)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -svr4*)
+ os=-sysv4
+ ;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -chorusos* | -chorusrdb* \
+ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i*86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto-qnx*)
+ ;;
+ -nto*)
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
+ -linux-dietlibc)
+ os=-linux-dietlibc
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -opened*)
+ os=-openedition
+ ;;
+ -os400*)
+ os=-os400
+ ;;
+ -wince*)
+ os=-wince
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -atheos*)
+ os=-atheos
+ ;;
+ -syllable*)
+ os=-syllable
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -nova*)
+ os=-rtmk-nova
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -tpf*)
+ os=-tpf
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -ose*)
+ os=-ose
+ ;;
+ -es1800*)
+ os=-ose
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
+ ;;
+ -aros*)
+ os=-aros
+ ;;
+ -kaos*)
+ os=-kaos
+ ;;
+ -zvmoe)
+ os=-zvmoe
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-rebel)
+ os=-linux
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ # This must come before the *-dec entry.
+ pdp10-*)
+ os=-tops20
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ # This also exists in the configure program, but was not the
+ # default.
+ # os=-sunos4
+ ;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ or32-*)
+ os=-coff
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-knuth)
+ os=-mmixware
+ ;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f30[01]-fujitsu | f700-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -aix*)
+ vendor=ibm
+ ;;
+ -beos*)
+ vendor=be
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -mpeix*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
+ -os400*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -tpf*)
+ vendor=ibm
+ ;;
+ -vxsim* | -vxworks* | -windiss*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ vendor=atari
+ ;;
+ -vos*)
+ vendor=stratus
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
--- /dev/null
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.59.
+#
+# Copyright (C) 2003 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+exec 6>&1
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_config_libobj_dir=.
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete. It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
+
+ac_unique_file="elf2flt.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#if HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#if HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#if STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# if HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#if HAVE_STRING_H
+# if !STDC_HEADERS && HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#if HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#if HAVE_INTTYPES_H
+# include <inttypes.h>
+#else
+# if HAVE_STDINT_H
+# include <stdint.h>
+# endif
+#endif
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CPP EGREP bfd_include_dir binutils_include_dir binutils_ldscript_dir got_check emit_relocs LIBOBJS LTLIBOBJS'
+ac_subst_files=''
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+ac_prev=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval "$ac_prev=\$ac_option"
+ ac_prev=
+ continue
+ fi
+
+ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_option in
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+ | --da=*)
+ datadir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ eval "enable_$ac_feature=no" ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "enable_$ac_feature='$ac_optarg'" ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst \
+ | --locals | --local | --loca | --loc | --lo)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "with_$ac_package='$ac_optarg'" ;;
+
+ -without-* | --without-*)
+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/-/_/g'`
+ eval "with_$ac_package=no" ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; }
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { (exit 1); exit 1; }; }
+ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+ eval "$ac_envvar='$ac_optarg'"
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ { echo "$as_me: error: missing argument to $ac_option" >&2
+ { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+ localstatedir libdir includedir oldincludedir infodir mandir
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then its parent.
+ ac_confdir=`(dirname "$0") 2>/dev/null ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$0" : 'X\(//\)[^/]' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$0" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r $srcdir/$ac_unique_file; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+ if test "$ac_srcdir_defaulted" = yes; then
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+ { (exit 1); exit 1; }; }
+ else
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { (exit 1); exit 1; }; }
+ fi
+fi
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+ { (exit 1); exit 1; }; }
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+ac_env_CC_set=${CC+set}
+ac_env_CC_value=$CC
+ac_cv_env_CC_set=${CC+set}
+ac_cv_env_CC_value=$CC
+ac_env_CFLAGS_set=${CFLAGS+set}
+ac_env_CFLAGS_value=$CFLAGS
+ac_cv_env_CFLAGS_set=${CFLAGS+set}
+ac_cv_env_CFLAGS_value=$CFLAGS
+ac_env_LDFLAGS_set=${LDFLAGS+set}
+ac_env_LDFLAGS_value=$LDFLAGS
+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ac_cv_env_LDFLAGS_value=$LDFLAGS
+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_env_CPPFLAGS_value=$CPPFLAGS
+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+ac_env_CPP_set=${CPP+set}
+ac_env_CPP_value=$CPP
+ac_cv_env_CPP_set=${CPP+set}
+ac_cv_env_CPP_value=$CPP
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+_ACEOF
+
+ cat <<_ACEOF
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --datadir=DIR read-only architecture-independent data [PREFIX/share]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --infodir=DIR info documentation [PREFIX/info]
+ --mandir=DIR man documentation [PREFIX/man]
+_ACEOF
+
+ cat <<\_ACEOF
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+ --target=TARGET configure for building compilers for TARGET [HOST]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --disable-got-check - disable check for GOT (needed on H8)
+ --disable-emit-relocs - don't use the --emit-relocs (-q) linker option
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-libbfd=<file> path to libbfd.a library to use
+ --with-libiberty=<file> path to libiberty.a library to use
+ --with-bfd-include-dir=<dir> include path for correct bfd.h
+ --with-binutils-include-dir=<dir> include path for binutils headers
+ --with-binutils-ldscript-dir=<dir> path to install elf2flt.ld
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
+ headers in a nonstandard directory <include dir>
+ CPP C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+_ACEOF
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ ac_popdir=`pwd`
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d $ac_dir || continue
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+ cd $ac_dir
+ # Check for guested configure; otherwise get Cygnus style configure.
+ if test -f $ac_srcdir/configure.gnu; then
+ echo
+ $SHELL $ac_srcdir/configure.gnu --help=recursive
+ elif test -f $ac_srcdir/configure; then
+ echo
+ $SHELL $ac_srcdir/configure --help=recursive
+ elif test -f $ac_srcdir/configure.ac ||
+ test -f $ac_srcdir/configure.in; then
+ echo
+ $ac_configure --help
+ else
+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi
+ cd $ac_popdir
+ done
+fi
+
+test -n "$ac_init_help" && exit 0
+if $ac_init_version; then
+ cat <<\_ACEOF
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit 0
+fi
+exec 5>config.log
+cat >&5 <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.59. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ echo "PATH: $as_dir"
+done
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_sep=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 2)
+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+ # Get rid of the leading space.
+ ac_sep=" "
+ ;;
+ esac
+ done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Be sure not to use single quotes in there, as some shells,
+# such as our DU 5.0 friend, will then `close' the trap.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+{
+ (set) 2>&1 |
+ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ sed -n \
+ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+ ;;
+ *)
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+}
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ sed "/^$/d" confdefs.h | sort
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ echo "$as_me: caught signal $ac_signal"
+ echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core &&
+ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+ ' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+ if test -r "$ac_site_file"; then
+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . $cache_file;;
+ *) . ./$cache_file;;
+ esac
+ fi
+else
+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in `(set) 2>&1 |
+ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+ eval ac_new_val="\$ac_env_${ac_var}_value"
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+echo "$as_me: former value: $ac_old_val" >&2;}
+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+echo "$as_me: current value: $ac_new_val" >&2;}
+ ac_cache_corrupted=:
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-libbfd or --without-libbfd was given.
+if test "${with_libbfd+set}" = set; then
+ withval="$with_libbfd"
+ ac_libbfd=$withval
+else
+ ac_libbfd=NONE
+
+fi;
+
+
+# Check whether --with-libiberty or --without-libiberty was given.
+if test "${with_libiberty+set}" = set; then
+ withval="$with_libiberty"
+ ac_libiberty=$withval
+else
+ ac_libiberty=NONE
+
+fi;
+
+
+# Check whether --with-bfd-include-dir or --without-bfd-include-dir was given.
+if test "${with_bfd_include_dir+set}" = set; then
+ withval="$with_bfd_include_dir"
+ ac_bfd_include_dir=$withval
+else
+ ac_bfd_include_dir=NONE
+
+fi;
+
+
+# Check whether --with-binutils-include-dir or --without-binutils-include-dir was given.
+if test "${with_binutils_include_dir+set}" = set; then
+ withval="$with_binutils_include_dir"
+ ac_binutils_include_dir=$withval
+else
+ ac_binutils_include_dir=NONE
+
+fi;
+
+
+# Check whether --with-binutils-ldscript-dir or --without-binutils-ldscript-dir was given.
+if test "${with_binutils_ldscript_dir+set}" = set; then
+ withval="$with_binutils_ldscript_dir"
+ ac_binutils_ldscript_dir=$withval
+else
+ ac_binutils_ldscript_dir=NONE
+
+fi;
+
+# Check whether --enable-got-check or --disable-got-check was given.
+if test "${enable_got_check+set}" = set; then
+ enableval="$enable_got_check"
+ got_check=$enableval
+else
+ got_check=yes
+
+fi;
+
+# Check whether --enable-emit_relocs or --disable-emit_relocs was given.
+if test "${enable_emit_relocs+set}" = set; then
+ enableval="$enable_emit_relocs"
+ emit_relocs=$enableval
+else
+ emit_relocs=yes
+
+fi;
+
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# Make sure we can run config.sub.
+$ac_config_sub sun4 >/dev/null 2>&1 ||
+ { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+ { (exit 1); exit 1; }; }
+
+echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6
+if test "${ac_cv_build+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_build_alias=$build_alias
+test -z "$ac_cv_build_alias" &&
+ ac_cv_build_alias=`$ac_config_guess`
+test -z "$ac_cv_build_alias" &&
+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+ { (exit 1); exit 1; }; }
+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6
+build=$ac_cv_build
+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6
+if test "${ac_cv_host+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_host_alias=$host_alias
+test -z "$ac_cv_host_alias" &&
+ ac_cv_host_alias=$ac_cv_build_alias
+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6
+host=$ac_cv_host
+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking target system type" >&5
+echo $ECHO_N "checking target system type... $ECHO_C" >&6
+if test "${ac_cv_target+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_target_alias=$target_alias
+test "x$ac_cv_target_alias" = "x" &&
+ ac_cv_target_alias=$ac_cv_host_alias
+ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_target" >&5
+echo "${ECHO_T}$ac_cv_target" >&6
+target=$ac_cv_target
+target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+test -n "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ CC=$ac_ct_CC
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ CC=$ac_ct_CC
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$ac_ct_CC" && break
+done
+
+ CC=$ac_ct_CC
+fi
+
+fi
+
+
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+ "checking for C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+ (eval $ac_compiler --version </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+ (eval $ac_compiler -v </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+ (eval $ac_compiler -V </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+ (eval $ac_link_default) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Find the output, starting from the most likely. This scheme is
+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+# resort.
+
+# Be careful to initialize this variable, since it used to be cached.
+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+ac_cv_exeext=
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+ ;;
+ conftest.$ac_ext )
+ # This is the source file.
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ # FIXME: I believe we export ac_cv_exeext for Libtool,
+ # but it would be cool to find out if it's true. Does anybody
+ # maintain Libtool? --akim.
+ export ac_cv_exeext
+ break;;
+ * )
+ break;;
+ esac
+done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
+ { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6
+
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+ if { ac_try='./$ac_file'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ fi
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6
+
+echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ export ac_cv_exeext
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+if test "${ac_cv_objext+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+GCC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+CFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_cc_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_prog_cc_stdc=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std1 is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std1. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX -qlanglvl=ansi
+# Ultrix and OSF/1 -std1
+# HP-UX 10.20 and later -Ae
+# HP-UX older versions -Aa -D_HPUX_SOURCE
+# SVR4 -Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_stdc=$ac_arg
+break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
+
+fi
+
+case "x$ac_cv_prog_cc_stdc" in
+ x|xno)
+ echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+ *)
+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+ CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
+# Some people use a C++ compiler to compile C. Since we use `exit',
+# in C++ we need to declare it. In case someone uses the same compiler
+# for both compiling C and C++ we need to have the C++ compiler decide
+# the declaration of exit, since it's the most demanding environment.
+cat >conftest.$ac_ext <<_ACEOF
+#ifndef __cplusplus
+ choke me
+#endif
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ for ac_declaration in \
+ '' \
+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
+ 'extern "C" void std::exit (int); using std::exit;' \
+ 'extern "C" void exit (int) throw ();' \
+ 'extern "C" void exit (int);' \
+ 'void exit (int);'
+do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+#include <stdlib.h>
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+ echo '#ifdef __cplusplus' >>confdefs.h
+ echo $ac_declaration >>confdefs.h
+ echo '#endif' >>confdefs.h
+fi
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+ ./ | .// | /cC/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+done
+
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL=$ac_install_sh
+ fi
+fi
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+if test "$ac_libiberty" = "NONE"; then
+
+
+echo "$as_me:$LINENO: checking for objalloc_create in -liberty" >&5
+echo $ECHO_N "checking for objalloc_create in -liberty... $ECHO_C" >&6
+if test "${ac_cv_lib_iberty_objalloc_create+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-liberty $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char objalloc_create ();
+int
+main ()
+{
+objalloc_create ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_iberty_objalloc_create=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_iberty_objalloc_create=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_iberty_objalloc_create" >&5
+echo "${ECHO_T}$ac_cv_lib_iberty_objalloc_create" >&6
+if test $ac_cv_lib_iberty_objalloc_create = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBIBERTY 1
+_ACEOF
+
+ LIBS="-liberty $LIBS"
+
+fi
+
+ ac_libiberty=auto
+else
+ LIBS="$ac_libiberty $LIBS"
+fi
+if test "$ac_libbfd" = "NONE"; then
+
+echo "$as_me:$LINENO: checking for bfd_openr in -lbfd" >&5
+echo $ECHO_N "checking for bfd_openr in -lbfd... $ECHO_C" >&6
+if test "${ac_cv_lib_bfd_bfd_openr+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lbfd $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char bfd_openr ();
+int
+main ()
+{
+bfd_openr ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_bfd_bfd_openr=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_bfd_bfd_openr=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_bfd_bfd_openr" >&5
+echo "${ECHO_T}$ac_cv_lib_bfd_bfd_openr" >&6
+if test $ac_cv_lib_bfd_bfd_openr = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBBFD 1
+_ACEOF
+
+ LIBS="-lbfd $LIBS"
+
+fi
+
+ ac_libbfd=auto
+else
+ LIBS="$ac_libbfd $LIBS"
+fi
+
+bfd_include_dir=
+if test "$ac_bfd_include_dir" != "NONE"; then
+ bfd_include_dir="-I$ac_bfd_include_dir"
+fi
+
+binutils_include_dir=
+if test "$ac_binutils_include_dir" != "NONE"; then
+ binutils_include_dir="-I$ac_binutils_include_dir"
+fi
+
+binutils_ldscript_dir=
+if test "$ac_binutils_ldscript_dir" = "NONE"; then
+ ac_binutils_ldscript_dir="\${TOOLDIR}/../${target_alias}/lib"
+fi
+binutils_ldscript_dir="$ac_binutils_ldscript_dir"
+
+if test "$ac_libbfd" = "NONE" -o "$ac_libiberty" = "NONE" ; then
+ { { echo "$as_me:$LINENO: error:
+
+You need to specify the location of the libfd.a and libiberty.a
+host libraries from the binutils package.
+
+Run configure again specifying these options:
+
+ ./configure --target=<ARCH> --with-bfd-include-dir=<dir> --with-libbfd=<libbfd.a> --with-libiberty=<libiberty.a>
+" >&5
+echo "$as_me: error:
+
+You need to specify the location of the libfd.a and libiberty.a
+host libraries from the binutils package.
+
+Run configure again specifying these options:
+
+ ./configure --target=<ARCH> --with-bfd-include-dir=<dir> --with-libbfd=<libbfd.a> --with-libiberty=<libiberty.a>
+" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+if test "$ac_bfd_include_dir" = "NONE" ; then
+ { { echo "$as_me:$LINENO: error:
+
+You need to specify the location of the bfd.h header from a
+configured/compiled version of the binutils package for your target.
+Without this your elf2flt may crash as it will try to use the
+systems bfd.h which may be from a different binutils package.
+
+Run configure again specifying these options:
+
+ ./configure --target=<ARCH> --with-bfd-include-dir=<dir> --with-libbfd=<libbfd.a> --with-libiberty=<libiberty.a>
+" >&5
+echo "$as_me: error:
+
+You need to specify the location of the bfd.h header from a
+configured/compiled version of the binutils package for your target.
+Without this your elf2flt may crash as it will try to use the
+systems bfd.h which may be from a different binutils package.
+
+Run configure again specifying these options:
+
+ ./configure --target=<ARCH> --with-bfd-include-dir=<dir> --with-libbfd=<libbfd.a> --with-libiberty=<libiberty.a>
+" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if test "${ac_cv_prog_CPP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ :
+else
+ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+ then ac_cv_prog_egrep='grep -E'
+ else ac_cv_prog_egrep='egrep'
+ fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
+
+
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_header_stdc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then
+ :
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ exit(2);
+ exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+
+
+
+
+
+
+
+
+
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_Header=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_Header=no"
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+for ac_header in fcntl.h unistd.h bfd.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------------ ##
+## Report this to the AC_PACKAGE_NAME lists. ##
+## ------------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
+echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
+if test "${ac_cv_c_const+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+/* FIXME: Include the comments suggested by Paul. */
+#ifndef __cplusplus
+ /* Ultrix mips cc rejects this. */
+ typedef int charset[2];
+ const charset x;
+ /* SunOS 4.1.1 cc rejects this. */
+ char const *const *ccp;
+ char **p;
+ /* NEC SVR4.0.2 mips cc rejects this. */
+ struct point {int x, y;};
+ static struct point const zero = {0,0};
+ /* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in
+ an arm of an if-expression whose if-part is not a constant
+ expression */
+ const char *g = "string";
+ ccp = &g + (g ? g-g : 0);
+ /* HPUX 7.0 cc rejects these. */
+ ++ccp;
+ p = (char**) ccp;
+ ccp = (char const *const *) p;
+ { /* SCO 3.2v4 cc rejects this. */
+ char *t;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+ }
+ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+ }
+ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+ }
+ { /* AIX XL C 1.02.0.0 rejects this saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
+ }
+ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+ }
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_c_const=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_c_const=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
+echo "${ECHO_T}$ac_cv_c_const" >&6
+if test $ac_cv_c_const = no; then
+
+cat >>confdefs.h <<\_ACEOF
+#define const
+_ACEOF
+
+fi
+
+
+
+for ac_func in vprintf
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != $ac_func;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+echo "$as_me:$LINENO: checking for _doprnt" >&5
+echo $ECHO_N "checking for _doprnt... $ECHO_C" >&6
+if test "${ac_cv_func__doprnt+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define _doprnt to an innocuous variant, in case <limits.h> declares _doprnt.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define _doprnt innocuous__doprnt
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char _doprnt (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef _doprnt
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char _doprnt ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub__doprnt) || defined (__stub____doprnt)
+choke me
+#else
+char (*f) () = _doprnt;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != _doprnt;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func__doprnt=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func__doprnt=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5
+echo "${ECHO_T}$ac_cv_func__doprnt" >&6
+if test $ac_cv_func__doprnt = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_DOPRNT 1
+_ACEOF
+
+fi
+
+fi
+done
+
+
+
+
+for ac_func in dcgettext
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != $ac_func;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+
+
+
+
+
+
+
+
+
+
+
+ ac_config_files="$ac_config_files Makefile ld-elf2flt"
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+{
+ (set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+} |
+ sed '
+ t clear
+ : clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+ if test -w $cache_file; then
+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+ cat confcache >$cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[ ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[ ]*$//;
+}'
+fi
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then we branch to the quote section. Otherwise,
+# look for a macro that doesn't take arguments.
+cat >confdef2opt.sed <<\_ACEOF
+t clear
+: clear
+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
+t quote
+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
+t quote
+d
+: quote
+s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
+s,\[,\\&,g
+s,\],\\&,g
+s,\$,$$,g
+p
+_ACEOF
+# We use echo to avoid assuming a particular line-breaking character.
+# The extra dot is to prevent the shell from consuming trailing
+# line-breaks from the sub-command output. A line-break within
+# single-quotes doesn't work because, if this script is created in a
+# platform that uses two characters for line-breaks (e.g., DOS), tr
+# would break.
+ac_LF_and_DOT=`echo; echo .`
+DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
+rm -f confdef2opt.sed
+
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_i=`echo "$ac_i" |
+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+ # 2. Add them.
+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+exec 6>&1
+
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling. Logging --version etc. is OK.
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.59. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
+_ACEOF
+
+# Files that config.status was made for.
+if test -n "$ac_config_files"; then
+ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_headers"; then
+ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_links"; then
+ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_commands"; then
+ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Report bugs to <bug-autoconf@gnu.org>."
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+config.status
+configured by $0, generated by GNU Autoconf 2.59,
+ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=$srcdir
+INSTALL="$INSTALL"
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value. By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=*)
+ ac_option=`expr "x$1" : 'x\([^=]*\)='`
+ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ -*)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ *) # This is not an option, so the user has probably given explicit
+ # arguments.
+ ac_option=$1
+ ac_need_defaults=false;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --vers* | -V )
+ echo "$ac_cs_version"; exit 0 ;;
+ --he | --h)
+ # Conflict between --help and --header
+ { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; };;
+ --help | --hel | -h )
+ echo "$ac_cs_usage"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+ ac_need_defaults=false;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; } ;;
+
+ *) ac_config_targets="$ac_config_targets $1" ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+
+
+
+
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_config_target in $ac_config_targets
+do
+ case "$ac_config_target" in
+ # Handling of arguments.
+ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "ld-elf2flt" ) CONFIG_FILES="$CONFIG_FILES ld-elf2flt" ;;
+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+ trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./confstat$$-$RANDOM
+ (umask 077 && mkdir $tmp)
+} ||
+{
+ echo "$me: cannot create a temporary directory in ." >&2
+ { (exit 1); exit 1; }
+}
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+
+#
+# CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "\$CONFIG_FILES"; then
+ # Protect against being on the right side of a sed subst in config.status.
+ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s,@SHELL@,$SHELL,;t t
+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s,@exec_prefix@,$exec_prefix,;t t
+s,@prefix@,$prefix,;t t
+s,@program_transform_name@,$program_transform_name,;t t
+s,@bindir@,$bindir,;t t
+s,@sbindir@,$sbindir,;t t
+s,@libexecdir@,$libexecdir,;t t
+s,@datadir@,$datadir,;t t
+s,@sysconfdir@,$sysconfdir,;t t
+s,@sharedstatedir@,$sharedstatedir,;t t
+s,@localstatedir@,$localstatedir,;t t
+s,@libdir@,$libdir,;t t
+s,@includedir@,$includedir,;t t
+s,@oldincludedir@,$oldincludedir,;t t
+s,@infodir@,$infodir,;t t
+s,@mandir@,$mandir,;t t
+s,@build_alias@,$build_alias,;t t
+s,@host_alias@,$host_alias,;t t
+s,@target_alias@,$target_alias,;t t
+s,@DEFS@,$DEFS,;t t
+s,@ECHO_C@,$ECHO_C,;t t
+s,@ECHO_N@,$ECHO_N,;t t
+s,@ECHO_T@,$ECHO_T,;t t
+s,@LIBS@,$LIBS,;t t
+s,@build@,$build,;t t
+s,@build_cpu@,$build_cpu,;t t
+s,@build_vendor@,$build_vendor,;t t
+s,@build_os@,$build_os,;t t
+s,@host@,$host,;t t
+s,@host_cpu@,$host_cpu,;t t
+s,@host_vendor@,$host_vendor,;t t
+s,@host_os@,$host_os,;t t
+s,@target@,$target,;t t
+s,@target_cpu@,$target_cpu,;t t
+s,@target_vendor@,$target_vendor,;t t
+s,@target_os@,$target_os,;t t
+s,@CC@,$CC,;t t
+s,@CFLAGS@,$CFLAGS,;t t
+s,@LDFLAGS@,$LDFLAGS,;t t
+s,@CPPFLAGS@,$CPPFLAGS,;t t
+s,@ac_ct_CC@,$ac_ct_CC,;t t
+s,@EXEEXT@,$EXEEXT,;t t
+s,@OBJEXT@,$OBJEXT,;t t
+s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+s,@INSTALL_DATA@,$INSTALL_DATA,;t t
+s,@CPP@,$CPP,;t t
+s,@EGREP@,$EGREP,;t t
+s,@bfd_include_dir@,$bfd_include_dir,;t t
+s,@binutils_include_dir@,$binutils_include_dir,;t t
+s,@binutils_ldscript_dir@,$binutils_ldscript_dir,;t t
+s,@got_check@,$got_check,;t t
+s,@emit_relocs@,$emit_relocs,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
+CEOF
+
+_ACEOF
+
+ cat >>$CONFIG_STATUS <<\_ACEOF
+ # Split the substitutions into bite-sized pieces for seds with
+ # small command number limits, like on Digital OSF/1 and HP-UX.
+ ac_max_sed_lines=48
+ ac_sed_frag=1 # Number of current file.
+ ac_beg=1 # First line for current file.
+ ac_end=$ac_max_sed_lines # Line after last line for current file.
+ ac_more_lines=:
+ ac_sed_cmds=
+ while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ else
+ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ fi
+ if test ! -s $tmp/subs.frag; then
+ ac_more_lines=false
+ else
+ # The purpose of the label and of the branching condition is to
+ # speed up the sed processing (if there are no `@' at all, there
+ # is no need to browse any of the substitutions).
+ # These are the two extra sed commands mentioned above.
+ (echo ':t
+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+ fi
+ ac_sed_frag=`expr $ac_sed_frag + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_lines`
+ fi
+ done
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
+ fi
+fi # test -n "$CONFIG_FILES"
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case $ac_file in
+ - | *:- | *:-:* ) # input from stdin
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
+ esac
+
+ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+ esac
+
+ if test x"$ac_file" != x-; then
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ rm -f "$ac_file"
+ fi
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ if test x"$ac_file" = x-; then
+ configure_input=
+ else
+ configure_input="$ac_file. "
+ fi
+ configure_input=$configure_input"Generated from `echo $ac_file_in |
+ sed 's,.*/,,'` by configure."
+
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+ ac_file_inputs=`IFS=:
+ for f in $ac_file_in; do
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ echo "$f";;
+ *) # Relative
+ if test -f "$f"; then
+ # Build tree
+ echo "$f"
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo "$srcdir/$f"
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@abs_srcdir@,$ac_abs_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s,@builddir@,$ac_builddir,;t t
+s,@abs_builddir@,$ac_abs_builddir,;t t
+s,@top_builddir@,$ac_top_builddir,;t t
+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
+s,@INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+ rm -f $tmp/stdin
+ if test x"$ac_file" != x-; then
+ mv $tmp/out $ac_file
+ else
+ cat $tmp/out
+ rm -f $tmp/out
+ fi
+
+done
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || { (exit 1); exit 1; }
+fi
+
+
--- /dev/null
+dnl Process this file with autoconf to produce a configure script.
+AC_INIT(elf2flt.c)
+
+AC_ARG_WITH(libbfd,
+ [ --with-libbfd=<file> path to libbfd.a library to use ],
+ [ ac_libbfd=$withval ],
+ [ ac_libbfd=NONE ]
+)
+
+AC_ARG_WITH(libiberty,
+ [ --with-libiberty=<file> path to libiberty.a library to use ],
+ [ ac_libiberty=$withval ],
+ [ ac_libiberty=NONE ]
+)
+
+AC_ARG_WITH(bfd-include-dir,
+ [ --with-bfd-include-dir=<dir> include path for correct bfd.h ],
+ [ ac_bfd_include_dir=$withval ],
+ [ ac_bfd_include_dir=NONE ]
+)
+
+AC_ARG_WITH(binutils-include-dir,
+ [ --with-binutils-include-dir=<dir> include path for binutils headers ],
+ [ ac_binutils_include_dir=$withval ],
+ [ ac_binutils_include_dir=NONE ]
+)
+
+AC_ARG_WITH(binutils-ldscript-dir,
+ [ --with-binutils-ldscript-dir=<dir> path to install elf2flt.ld ],
+ [ ac_binutils_ldscript_dir=$withval ],
+ [ ac_binutils_ldscript_dir=NONE ]
+)
+
+AC_ARG_ENABLE(got-check,
+ [ --disable-got-check - disable check for GOT (needed on H8) ],
+ [ got_check=$enableval ],
+ [ got_check=yes ]
+)
+
+AC_ARG_ENABLE(emit_relocs,
+ [ --disable-emit-relocs - don't use the --emit-relocs (-q) linker option ],
+ [ emit_relocs=$enableval ],
+ [ emit_relocs=yes ]
+)
+
+AC_CANONICAL_HOST
+AC_CANONICAL_TARGET
+
+dnl Checks for programs.
+AC_PROG_CC
+AC_PROG_INSTALL
+
+dnl Checks for libraries.
+if test "$ac_libiberty" = "NONE"; then
+ AC_CHECK_LIB(iberty, objalloc_create)
+ ac_libiberty=auto
+else
+ LIBS="$ac_libiberty $LIBS"
+fi
+if test "$ac_libbfd" = "NONE"; then
+ AC_CHECK_LIB(bfd, bfd_openr)
+ ac_libbfd=auto
+else
+ LIBS="$ac_libbfd $LIBS"
+fi
+
+bfd_include_dir=
+if test "$ac_bfd_include_dir" != "NONE"; then
+ bfd_include_dir="-I$ac_bfd_include_dir"
+fi
+
+binutils_include_dir=
+if test "$ac_binutils_include_dir" != "NONE"; then
+ binutils_include_dir="-I$ac_binutils_include_dir"
+fi
+
+binutils_ldscript_dir=
+if test "$ac_binutils_ldscript_dir" = "NONE"; then
+ ac_binutils_ldscript_dir="\${TOOLDIR}/../${target_alias}/lib"
+fi
+binutils_ldscript_dir="$ac_binutils_ldscript_dir"
+
+if test "$ac_libbfd" = "NONE" -o "$ac_libiberty" = "NONE" ; then
+ AC_MSG_ERROR([
+
+You need to specify the location of the libfd.a and libiberty.a
+host libraries from the binutils package.
+
+Run configure again specifying these options:
+
+ ./configure --target=<ARCH> --with-bfd-include-dir=<dir> --with-libbfd=<libbfd.a> --with-libiberty=<libiberty.a>
+])
+fi
+
+if test "$ac_bfd_include_dir" = "NONE" ; then
+ AC_MSG_ERROR([
+
+You need to specify the location of the bfd.h header from a
+configured/compiled version of the binutils package for your target.
+Without this your elf2flt may crash as it will try to use the
+systems bfd.h which may be from a different binutils package.
+
+Run configure again specifying these options:
+
+ ./configure --target=<ARCH> --with-bfd-include-dir=<dir> --with-libbfd=<libbfd.a> --with-libiberty=<libiberty.a>
+])
+fi
+
+dnl Checks for header files.
+AC_HEADER_STDC
+AC_CHECK_HEADERS(fcntl.h unistd.h bfd.h)
+
+dnl Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+
+dnl Checks for library functions.
+AC_FUNC_VPRINTF
+
+AC_CHECK_FUNCS(dcgettext)
+
+dnl Subsitute values
+AC_SUBST(target)
+AC_SUBST(target_alias)
+AC_SUBST(target_cpu)
+AC_SUBST(target_os)
+AC_SUBST(target_vendor)
+AC_SUBST(bfd_include_dir)
+AC_SUBST(binutils_include_dir)
+AC_SUBST(binutils_ldscript_dir)
+AC_SUBST(got_check)
+AC_SUBST(emit_relocs)
+
+AC_OUTPUT(Makefile ld-elf2flt)
+
--- /dev/null
+/* This file defines standard ELF types, structures, and macros.
+ Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ 02111-1307 USA. */
+
+#ifndef _ELF_H
+#define _ELF_H 1
+
+#if defined(__MINGW32__)
+#include <stdint.h>
+typedef uint16_t u_int16_t;
+typedef uint32_t u_int32_t;
+typedef uint64_t u_int64_t;
+#else
+#include <features.h>
+#endif
+/* Standard ELF types. */
+
+#include <sys/types.h>
+
+/* Type for a 16-bit quantity. */
+typedef u_int16_t Elf32_Half;
+typedef u_int16_t Elf64_Half;
+
+/* Types for signed and unsigned 32-bit quantities. */
+typedef u_int32_t Elf32_Word;
+typedef int32_t Elf32_Sword;
+typedef u_int32_t Elf64_Word;
+typedef int32_t Elf64_Sword;
+
+/* Types for signed and unsigned 64-bit quantities. */
+typedef u_int64_t Elf32_Xword;
+typedef int64_t Elf32_Sxword;
+typedef u_int64_t Elf64_Xword;
+typedef int64_t Elf64_Sxword;
+
+/* Type of addresses. */
+typedef u_int32_t Elf32_Addr;
+typedef u_int64_t Elf64_Addr;
+
+/* Type of file offsets. */
+typedef u_int32_t Elf32_Off;
+typedef u_int64_t Elf64_Off;
+
+/* Type for section indices, which are 16-bit quantities. */
+typedef u_int16_t Elf32_Section;
+typedef u_int16_t Elf64_Section;
+
+/* Type for version symbol information. */
+typedef Elf32_Half Elf32_Versym;
+typedef Elf64_Half Elf64_Versym;
+
+
+/* The ELF file header. This appears at the start of every ELF file. */
+
+#define EI_NIDENT (16)
+
+typedef struct
+{
+ unsigned char e_ident[EI_NIDENT]; /* Magic number and other info */
+ Elf32_Half e_type; /* Object file type */
+ Elf32_Half e_machine; /* Architecture */
+ Elf32_Word e_version; /* Object file version */
+ Elf32_Addr e_entry; /* Entry point virtual address */
+ Elf32_Off e_phoff; /* Program header table file offset */
+ Elf32_Off e_shoff; /* Section header table file offset */
+ Elf32_Word e_flags; /* Processor-specific flags */
+ Elf32_Half e_ehsize; /* ELF header size in bytes */
+ Elf32_Half e_phentsize; /* Program header table entry size */
+ Elf32_Half e_phnum; /* Program header table entry count */
+ Elf32_Half e_shentsize; /* Section header table entry size */
+ Elf32_Half e_shnum; /* Section header table entry count */
+ Elf32_Half e_shstrndx; /* Section header string table index */
+} Elf32_Ehdr;
+
+typedef struct
+{
+ unsigned char e_ident[EI_NIDENT]; /* Magic number and other info */
+ Elf64_Half e_type; /* Object file type */
+ Elf64_Half e_machine; /* Architecture */
+ Elf64_Word e_version; /* Object file version */
+ Elf64_Addr e_entry; /* Entry point virtual address */
+ Elf64_Off e_phoff; /* Program header table file offset */
+ Elf64_Off e_shoff; /* Section header table file offset */
+ Elf64_Word e_flags; /* Processor-specific flags */
+ Elf64_Half e_ehsize; /* ELF header size in bytes */
+ Elf64_Half e_phentsize; /* Program header table entry size */
+ Elf64_Half e_phnum; /* Program header table entry count */
+ Elf64_Half e_shentsize; /* Section header table entry size */
+ Elf64_Half e_shnum; /* Section header table entry count */
+ Elf64_Half e_shstrndx; /* Section header string table index */
+} Elf64_Ehdr;
+
+/* Fields in the e_ident array. The EI_* macros are indices into the
+ array. The macros under each EI_* macro are the values the byte
+ may have. */
+
+#define EI_MAG0 0 /* File identification byte 0 index */
+#define ELFMAG0 0x7f /* Magic number byte 0 */
+
+#define EI_MAG1 1 /* File identification byte 1 index */
+#define ELFMAG1 'E' /* Magic number byte 1 */
+
+#define EI_MAG2 2 /* File identification byte 2 index */
+#define ELFMAG2 'L' /* Magic number byte 2 */
+
+#define EI_MAG3 3 /* File identification byte 3 index */
+#define ELFMAG3 'F' /* Magic number byte 3 */
+
+/* Conglomeration of the identification bytes, for easy testing as a word. */
+#define ELFMAG "\177ELF"
+#define SELFMAG 4
+
+#define EI_CLASS 4 /* File class byte index */
+#define ELFCLASSNONE 0 /* Invalid class */
+#define ELFCLASS32 1 /* 32-bit objects */
+#define ELFCLASS64 2 /* 64-bit objects */
+#define ELFCLASSNUM 3
+
+#define EI_DATA 5 /* Data encoding byte index */
+#define ELFDATANONE 0 /* Invalid data encoding */
+#define ELFDATA2LSB 1 /* 2's complement, little endian */
+#define ELFDATA2MSB 2 /* 2's complement, big endian */
+#define ELFDATANUM 3
+
+#define EI_VERSION 6 /* File version byte index */
+ /* Value must be EV_CURRENT */
+
+#define EI_OSABI 7 /* OS ABI identification */
+#define ELFOSABI_SYSV 0 /* UNIX System V ABI */
+#define ELFOSABI_HPUX 1 /* HP-UX */
+#define ELFOSABI_ARM 97 /* ARM */
+#define ELFOSABI_STANDALONE 255 /* Standalone (embedded) application */
+
+#define EI_ABIVERSION 8 /* ABI version */
+
+#define EI_PAD 9 /* Byte index of padding bytes */
+
+/* Legal values for e_type (object file type). */
+
+#define ET_NONE 0 /* No file type */
+#define ET_REL 1 /* Relocatable file */
+#define ET_EXEC 2 /* Executable file */
+#define ET_DYN 3 /* Shared object file */
+#define ET_CORE 4 /* Core file */
+#define ET_NUM 5 /* Number of defined types */
+#define ET_LOOS 0xfe00 /* OS-specific range start */
+#define ET_HIOS 0xfeff /* OS-specific range end */
+#define ET_LOPROC 0xff00 /* Processor-specific range start */
+#define ET_HIPROC 0xffff /* Processor-specific range end */
+
+/* Legal values for e_machine (architecture). */
+
+#define EM_NONE 0 /* No machine */
+#define EM_M32 1 /* AT&T WE 32100 */
+#define EM_SPARC 2 /* SUN SPARC */
+#define EM_386 3 /* Intel 80386 */
+#define EM_68K 4 /* Motorola m68k family */
+#define EM_88K 5 /* Motorola m88k family */
+#define EM_860 7 /* Intel 80860 */
+#define EM_MIPS 8 /* MIPS R3000 big-endian */
+#define EM_S370 9 /* IBM System/370 */
+#define EM_MIPS_RS3_LE 10 /* MIPS R3000 little-endian */
+
+#define EM_PARISC 15 /* HPPA */
+#define EM_VPP500 17 /* Fujitsu VPP500 */
+#define EM_SPARC32PLUS 18 /* Sun's "v8plus" */
+#define EM_960 19 /* Intel 80960 */
+#define EM_PPC 20 /* PowerPC */
+#define EM_PPC64 21 /* PowerPC 64-bit */
+#define EM_S390 22 /* IBM S390 */
+
+#define EM_V800 36 /* NEC V800 series */
+#define EM_FR20 37 /* Fujitsu FR20 */
+#define EM_RH32 38 /* TRW RH-32 */
+#define EM_RCE 39 /* Motorola RCE */
+#define EM_ARM 40 /* ARM */
+#define EM_FAKE_ALPHA 41 /* Digital Alpha */
+#define EM_SH 42 /* Hitachi SH */
+#define EM_SPARCV9 43 /* SPARC v9 64-bit */
+#define EM_TRICORE 44 /* Siemens Tricore */
+#define EM_ARC 45 /* Argonaut RISC Core */
+#define EM_H8_300 46 /* Hitachi H8/300 */
+#define EM_H8_300H 47 /* Hitachi H8/300H */
+#define EM_H8S 48 /* Hitachi H8S */
+#define EM_H8_500 49 /* Hitachi H8/500 */
+#define EM_IA_64 50 /* Intel Merced */
+#define EM_MIPS_X 51 /* Stanford MIPS-X */
+#define EM_COLDFIRE 52 /* Motorola Coldfire */
+#define EM_68HC12 53 /* Motorola M68HC12 */
+#define EM_MMA 54 /* Fujitsu MMA Multimedia Accelerator*/
+#define EM_PCP 55 /* Siemens PCP */
+#define EM_NCPU 56 /* Sony nCPU embeeded RISC */
+#define EM_NDR1 57 /* Denso NDR1 microprocessor */
+#define EM_STARCORE 58 /* Motorola Start*Core processor */
+#define EM_ME16 59 /* Toyota ME16 processor */
+#define EM_ST100 60 /* STMicroelectronic ST100 processor */
+#define EM_TINYJ 61 /* Advanced Logic Corp. Tinyj emb.fam*/
+#define EM_X86_64 62 /* AMD x86-64 architecture */
+#define EM_PDSP 63 /* Sony DSP Processor */
+
+#define EM_FX66 66 /* Siemens FX66 microcontroller */
+#define EM_ST9PLUS 67 /* STMicroelectronics ST9+ 8/16 mc */
+#define EM_ST7 68 /* STmicroelectronics ST7 8 bit mc */
+#define EM_68HC16 69 /* Motorola MC68HC16 microcontroller */
+#define EM_68HC11 70 /* Motorola MC68HC11 microcontroller */
+#define EM_68HC08 71 /* Motorola MC68HC08 microcontroller */
+#define EM_68HC05 72 /* Motorola MC68HC05 microcontroller */
+#define EM_SVX 73 /* Silicon Graphics SVx */
+#define EM_AT19 74 /* STMicroelectronics ST19 8 bit mc */
+#define EM_VAX 75 /* Digital VAX */
+#define EM_CRIS 76 /* Axis Communications 32-bit embedded processor */
+#define EM_JAVELIN 77 /* Infineon Technologies 32-bit embedded processor */
+#define EM_FIREPATH 78 /* Element 14 64-bit DSP Processor */
+#define EM_ZSP 79 /* LSI Logic 16-bit DSP Processor */
+#define EM_MMIX 80 /* Donald Knuth's educational 64-bit processor */
+#define EM_HUANY 81 /* Harvard University machine-independent object files */
+#define EM_PRISM 82 /* SiTera Prism */
+#define EM_AVR 83 /* Atmel AVR 8-bit microcontroller */
+#define EM_FR30 84 /* Fujitsu FR30 */
+#define EM_D10V 85 /* Mitsubishi D10V */
+#define EM_D30V 86 /* Mitsubishi D30V */
+#define EM_V850 87 /* NEC v850 */
+#define EM_M32R 88 /* Mitsubishi M32R */
+#define EM_MN10300 89 /* Matsushita MN10300 */
+#define EM_MN10200 90 /* Matsushita MN10200 */
+#define EM_PJ 91 /* picoJava */
+#define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */
+#define EM_ARC_A5 93 /* ARC Cores Tangent-A5 */
+#define EM_XTENSA 94 /* Tensilica Xtensa Architecture */
+#define EM_NUM 95
+
+/* If it is necessary to assign new unofficial EM_* values, please
+ pick large random numbers (0x8523, 0xa7f2, etc.) to minimize the
+ chances of collision with official or non-GNU unofficial values. */
+
+#define EM_ALPHA 0x9026
+
+/* Legal values for e_version (version). */
+
+#define EV_NONE 0 /* Invalid ELF version */
+#define EV_CURRENT 1 /* Current version */
+#define EV_NUM 2
+
+/* Section header. */
+
+typedef struct
+{
+ Elf32_Word sh_name; /* Section name (string tbl index) */
+ Elf32_Word sh_type; /* Section type */
+ Elf32_Word sh_flags; /* Section flags */
+ Elf32_Addr sh_addr; /* Section virtual addr at execution */
+ Elf32_Off sh_offset; /* Section file offset */
+ Elf32_Word sh_size; /* Section size in bytes */
+ Elf32_Word sh_link; /* Link to another section */
+ Elf32_Word sh_info; /* Additional section information */
+ Elf32_Word sh_addralign; /* Section alignment */
+ Elf32_Word sh_entsize; /* Entry size if section holds table */
+} Elf32_Shdr;
+
+typedef struct
+{
+ Elf64_Word sh_name; /* Section name (string tbl index) */
+ Elf64_Word sh_type; /* Section type */
+ Elf64_Xword sh_flags; /* Section flags */
+ Elf64_Addr sh_addr; /* Section virtual addr at execution */
+ Elf64_Off sh_offset; /* Section file offset */
+ Elf64_Xword sh_size; /* Section size in bytes */
+ Elf64_Word sh_link; /* Link to another section */
+ Elf64_Word sh_info; /* Additional section information */
+ Elf64_Xword sh_addralign; /* Section alignment */
+ Elf64_Xword sh_entsize; /* Entry size if section holds table */
+} Elf64_Shdr;
+
+/* Special section indices. */
+
+#define SHN_UNDEF 0 /* Undefined section */
+#define SHN_LORESERVE 0xff00 /* Start of reserved indices */
+#define SHN_LOPROC 0xff00 /* Start of processor-specific */
+#define SHN_HIPROC 0xff1f /* End of processor-specific */
+#define SHN_LOOS 0xff20 /* Start of OS-specific */
+#define SHN_HIOS 0xff3f /* End of OS-specific */
+#define SHN_ABS 0xfff1 /* Associated symbol is absolute */
+#define SHN_COMMON 0xfff2 /* Associated symbol is common */
+#define SHN_XINDEX 0xffff /* Index is in extra table. */
+#define SHN_HIRESERVE 0xffff /* End of reserved indices */
+
+/* Legal values for sh_type (section type). */
+
+#define SHT_NULL 0 /* Section header table entry unused */
+#define SHT_PROGBITS 1 /* Program data */
+#define SHT_SYMTAB 2 /* Symbol table */
+#define SHT_STRTAB 3 /* String table */
+#define SHT_RELA 4 /* Relocation entries with addends */
+#define SHT_HASH 5 /* Symbol hash table */
+#define SHT_DYNAMIC 6 /* Dynamic linking information */
+#define SHT_NOTE 7 /* Notes */
+#define SHT_NOBITS 8 /* Program space with no data (bss) */
+#define SHT_REL 9 /* Relocation entries, no addends */
+#define SHT_SHLIB 10 /* Reserved */
+#define SHT_DYNSYM 11 /* Dynamic linker symbol table */
+#define SHT_INIT_ARRAY 14 /* Array of constructors */
+#define SHT_FINI_ARRAY 15 /* Array of destructors */
+#define SHT_PREINIT_ARRAY 16 /* Array of pre-constructors */
+#define SHT_GROUP 17 /* Section group */
+#define SHT_SYMTAB_SHNDX 18 /* Extended section indeces */
+#define SHT_NUM 19 /* Number of defined types. */
+#define SHT_LOOS 0x60000000 /* Start OS-specific */
+#define SHT_CHECKSUM 0x6ffffff8 /* Checksum for DSO content. */
+#define SHT_LOSUNW 0x6ffffffa /* Sun-specific low bound. */
+#define SHT_SUNW_move 0x6ffffffa
+#define SHT_SUNW_COMDAT 0x6ffffffb
+#define SHT_SUNW_syminfo 0x6ffffffc
+#define SHT_GNU_verdef 0x6ffffffd /* Version definition section. */
+#define SHT_GNU_verneed 0x6ffffffe /* Version needs section. */
+#define SHT_GNU_versym 0x6fffffff /* Version symbol table. */
+#define SHT_HISUNW 0x6fffffff /* Sun-specific high bound. */
+#define SHT_HIOS 0x6fffffff /* End OS-specific type */
+#define SHT_LOPROC 0x70000000 /* Start of processor-specific */
+#define SHT_HIPROC 0x7fffffff /* End of processor-specific */
+#define SHT_LOUSER 0x80000000 /* Start of application-specific */
+#define SHT_HIUSER 0x8fffffff /* End of application-specific */
+
+/* Legal values for sh_flags (section flags). */
+
+#define SHF_WRITE (1 << 0) /* Writable */
+#define SHF_ALLOC (1 << 1) /* Occupies memory during execution */
+#define SHF_EXECINSTR (1 << 2) /* Executable */
+#define SHF_MERGE (1 << 4) /* Might be merged */
+#define SHF_STRINGS (1 << 5) /* Contains nul-terminated strings */
+#define SHF_INFO_LINK (1 << 6) /* `sh_info' contains SHT index */
+#define SHF_LINK_ORDER (1 << 7) /* Preserve order after combining */
+#define SHF_OS_NONCONFORMING (1 << 8) /* Non-standard OS specific handling
+ required */
+#define SHF_MASKOS 0x0ff00000 /* OS-specific. */
+#define SHF_MASKPROC 0xf0000000 /* Processor-specific */
+
+/* Section group handling. */
+#define GRP_COMDAT 0x1 /* Mark group as COMDAT. */
+
+/* Symbol table entry. */
+
+typedef struct
+{
+ Elf32_Word st_name; /* Symbol name (string tbl index) */
+ Elf32_Addr st_value; /* Symbol value */
+ Elf32_Word st_size; /* Symbol size */
+ unsigned char st_info; /* Symbol type and binding */
+ unsigned char st_other; /* Symbol visibility */
+ Elf32_Section st_shndx; /* Section index */
+} Elf32_Sym;
+
+typedef struct
+{
+ Elf64_Word st_name; /* Symbol name (string tbl index) */
+ unsigned char st_info; /* Symbol type and binding */
+ unsigned char st_other; /* Symbol visibility */
+ Elf64_Section st_shndx; /* Section index */
+ Elf64_Addr st_value; /* Symbol value */
+ Elf64_Xword st_size; /* Symbol size */
+} Elf64_Sym;
+
+/* The syminfo section if available contains additional information about
+ every dynamic symbol. */
+
+typedef struct
+{
+ Elf32_Half si_boundto; /* Direct bindings, symbol bound to */
+ Elf32_Half si_flags; /* Per symbol flags */
+} Elf32_Syminfo;
+
+typedef struct
+{
+ Elf64_Half si_boundto; /* Direct bindings, symbol bound to */
+ Elf64_Half si_flags; /* Per symbol flags */
+} Elf64_Syminfo;
+
+/* Possible values for si_boundto. */
+#define SYMINFO_BT_SELF 0xffff /* Symbol bound to self */
+#define SYMINFO_BT_PARENT 0xfffe /* Symbol bound to parent */
+#define SYMINFO_BT_LOWRESERVE 0xff00 /* Beginning of reserved entries */
+
+/* Possible bitmasks for si_flags. */
+#define SYMINFO_FLG_DIRECT 0x0001 /* Direct bound symbol */
+#define SYMINFO_FLG_PASSTHRU 0x0002 /* Pass-thru symbol for translator */
+#define SYMINFO_FLG_COPY 0x0004 /* Symbol is a copy-reloc */
+#define SYMINFO_FLG_LAZYLOAD 0x0008 /* Symbol bound to object to be lazy
+ loaded */
+/* Syminfo version values. */
+#define SYMINFO_NONE 0
+#define SYMINFO_CURRENT 1
+#define SYMINFO_NUM 2
+
+
+/* Special section index. */
+
+#define SHN_UNDEF 0 /* No section, undefined symbol. */
+
+/* How to extract and insert information held in the st_info field. */
+
+#define ELF32_ST_BIND(val) (((unsigned char) (val)) >> 4)
+#define ELF32_ST_TYPE(val) ((val) & 0xf)
+#define ELF32_ST_INFO(bind, type) (((bind) << 4) + ((type) & 0xf))
+
+/* Both Elf32_Sym and Elf64_Sym use the same one-byte st_info field. */
+#define ELF64_ST_BIND(val) ELF32_ST_BIND (val)
+#define ELF64_ST_TYPE(val) ELF32_ST_TYPE (val)
+#define ELF64_ST_INFO(bind, type) ELF32_ST_INFO ((bind), (type))
+
+/* Legal values for ST_BIND subfield of st_info (symbol binding). */
+
+#define STB_LOCAL 0 /* Local symbol */
+#define STB_GLOBAL 1 /* Global symbol */
+#define STB_WEAK 2 /* Weak symbol */
+#define STB_NUM 3 /* Number of defined types. */
+#define STB_LOOS 10 /* Start of OS-specific */
+#define STB_HIOS 12 /* End of OS-specific */
+#define STB_LOPROC 13 /* Start of processor-specific */
+#define STB_HIPROC 15 /* End of processor-specific */
+
+/* Legal values for ST_TYPE subfield of st_info (symbol type). */
+
+#define STT_NOTYPE 0 /* Symbol type is unspecified */
+#define STT_OBJECT 1 /* Symbol is a data object */
+#define STT_FUNC 2 /* Symbol is a code object */
+#define STT_SECTION 3 /* Symbol associated with a section */
+#define STT_FILE 4 /* Symbol's name is file name */
+#define STT_COMMON 5 /* Symbol is a common data object */
+#define STT_NUM 6 /* Number of defined types. */
+#define STT_LOOS 10 /* Start of OS-specific */
+#define STT_HIOS 12 /* End of OS-specific */
+#define STT_LOPROC 13 /* Start of processor-specific */
+#define STT_HIPROC 15 /* End of processor-specific */
+
+
+/* Symbol table indices are found in the hash buckets and chain table
+ of a symbol hash table section. This special index value indicates
+ the end of a chain, meaning no further symbols are found in that bucket. */
+
+#define STN_UNDEF 0 /* End of a chain. */
+
+
+/* How to extract and insert information held in the st_other field. */
+
+#define ELF32_ST_VISIBILITY(o) ((o) & 0x03)
+
+/* For ELF64 the definitions are the same. */
+#define ELF64_ST_VISIBILITY(o) ELF32_ST_VISIBILITY (o)
+
+/* Symbol visibility specification encoded in the st_other field. */
+#define STV_DEFAULT 0 /* Default symbol visibility rules */
+#define STV_INTERNAL 1 /* Processor specific hidden class */
+#define STV_HIDDEN 2 /* Sym unavailable in other modules */
+#define STV_PROTECTED 3 /* Not preemptible, not exported */
+
+
+/* Relocation table entry without addend (in section of type SHT_REL). */
+
+typedef struct
+{
+ Elf32_Addr r_offset; /* Address */
+ Elf32_Word r_info; /* Relocation type and symbol index */
+} Elf32_Rel;
+
+/* I have seen two different definitions of the Elf64_Rel and
+ Elf64_Rela structures, so we'll leave them out until Novell (or
+ whoever) gets their act together. */
+/* The following, at least, is used on Sparc v9, MIPS, and Alpha. */
+
+typedef struct
+{
+ Elf64_Addr r_offset; /* Address */
+ Elf64_Xword r_info; /* Relocation type and symbol index */
+} Elf64_Rel;
+
+/* Relocation table entry with addend (in section of type SHT_RELA). */
+
+typedef struct
+{
+ Elf32_Addr r_offset; /* Address */
+ Elf32_Word r_info; /* Relocation type and symbol index */
+ Elf32_Sword r_addend; /* Addend */
+} Elf32_Rela;
+
+typedef struct
+{
+ Elf64_Addr r_offset; /* Address */
+ Elf64_Xword r_info; /* Relocation type and symbol index */
+ Elf64_Sxword r_addend; /* Addend */
+} Elf64_Rela;
+
+/* How to extract and insert information held in the r_info field. */
+
+#define ELF32_R_SYM(val) ((val) >> 8)
+#define ELF32_R_TYPE(val) ((val) & 0xff)
+#define ELF32_R_INFO(sym, type) (((sym) << 8) + ((type) & 0xff))
+
+#define ELF64_R_SYM(i) ((i) >> 32)
+#define ELF64_R_TYPE(i) ((i) & 0xffffffff)
+#define ELF64_R_INFO(sym,type) ((((Elf64_Xword) (sym)) << 32) + (type))
+
+/* Program segment header. */
+
+typedef struct
+{
+ Elf32_Word p_type; /* Segment type */
+ Elf32_Off p_offset; /* Segment file offset */
+ Elf32_Addr p_vaddr; /* Segment virtual address */
+ Elf32_Addr p_paddr; /* Segment physical address */
+ Elf32_Word p_filesz; /* Segment size in file */
+ Elf32_Word p_memsz; /* Segment size in memory */
+ Elf32_Word p_flags; /* Segment flags */
+ Elf32_Word p_align; /* Segment alignment */
+} Elf32_Phdr;
+
+typedef struct
+{
+ Elf64_Word p_type; /* Segment type */
+ Elf64_Word p_flags; /* Segment flags */
+ Elf64_Off p_offset; /* Segment file offset */
+ Elf64_Addr p_vaddr; /* Segment virtual address */
+ Elf64_Addr p_paddr; /* Segment physical address */
+ Elf64_Xword p_filesz; /* Segment size in file */
+ Elf64_Xword p_memsz; /* Segment size in memory */
+ Elf64_Xword p_align; /* Segment alignment */
+} Elf64_Phdr;
+
+/* Legal values for p_type (segment type). */
+
+#define PT_NULL 0 /* Program header table entry unused */
+#define PT_LOAD 1 /* Loadable program segment */
+#define PT_DYNAMIC 2 /* Dynamic linking information */
+#define PT_INTERP 3 /* Program interpreter */
+#define PT_NOTE 4 /* Auxiliary information */
+#define PT_SHLIB 5 /* Reserved */
+#define PT_PHDR 6 /* Entry for header table itself */
+#define PT_NUM 7 /* Number of defined types */
+#define PT_LOOS 0x60000000 /* Start of OS-specific */
+#define PT_HIOS 0x6fffffff /* End of OS-specific */
+#define PT_LOPROC 0x70000000 /* Start of processor-specific */
+#define PT_HIPROC 0x7fffffff /* End of processor-specific */
+
+/* Legal values for p_flags (segment flags). */
+
+#define PF_X (1 << 0) /* Segment is executable */
+#define PF_W (1 << 1) /* Segment is writable */
+#define PF_R (1 << 2) /* Segment is readable */
+#define PF_MASKOS 0x0ff00000 /* OS-specific */
+#define PF_MASKPROC 0xf0000000 /* Processor-specific */
+
+/* Legal values for note segment descriptor types for core files. */
+
+#define NT_PRSTATUS 1 /* Contains copy of prstatus struct */
+#define NT_FPREGSET 2 /* Contains copy of fpregset struct */
+#define NT_PRPSINFO 3 /* Contains copy of prpsinfo struct */
+#define NT_PRXREG 4 /* Contains copy of prxregset struct */
+#define NT_PLATFORM 5 /* String from sysinfo(SI_PLATFORM) */
+#define NT_AUXV 6 /* Contains copy of auxv array */
+#define NT_GWINDOWS 7 /* Contains copy of gwindows struct */
+#define NT_PSTATUS 10 /* Contains copy of pstatus struct */
+#define NT_PSINFO 13 /* Contains copy of psinfo struct */
+#define NT_PRCRED 14 /* Contains copy of prcred struct */
+#define NT_UTSNAME 15 /* Contains copy of utsname struct */
+#define NT_LWPSTATUS 16 /* Contains copy of lwpstatus struct */
+#define NT_LWPSINFO 17 /* Contains copy of lwpinfo struct */
+#define NT_PRFPXREG 20 /* Contains copy of fprxregset struct*/
+
+/* Legal values for the note segment descriptor types for object files. */
+
+#define NT_VERSION 1 /* Contains a version string. */
+
+
+/* Dynamic section entry. */
+
+typedef struct
+{
+ Elf32_Sword d_tag; /* Dynamic entry type */
+ union
+ {
+ Elf32_Word d_val; /* Integer value */
+ Elf32_Addr d_ptr; /* Address value */
+ } d_un;
+} Elf32_Dyn;
+
+typedef struct
+{
+ Elf64_Sxword d_tag; /* Dynamic entry type */
+ union
+ {
+ Elf64_Xword d_val; /* Integer value */
+ Elf64_Addr d_ptr; /* Address value */
+ } d_un;
+} Elf64_Dyn;
+
+/* Legal values for d_tag (dynamic entry type). */
+
+#define DT_NULL 0 /* Marks end of dynamic section */
+#define DT_NEEDED 1 /* Name of needed library */
+#define DT_PLTRELSZ 2 /* Size in bytes of PLT relocs */
+#define DT_PLTGOT 3 /* Processor defined value */
+#define DT_HASH 4 /* Address of symbol hash table */
+#define DT_STRTAB 5 /* Address of string table */
+#define DT_SYMTAB 6 /* Address of symbol table */
+#define DT_RELA 7 /* Address of Rela relocs */
+#define DT_RELASZ 8 /* Total size of Rela relocs */
+#define DT_RELAENT 9 /* Size of one Rela reloc */
+#define DT_STRSZ 10 /* Size of string table */
+#define DT_SYMENT 11 /* Size of one symbol table entry */
+#define DT_INIT 12 /* Address of init function */
+#define DT_FINI 13 /* Address of termination function */
+#define DT_SONAME 14 /* Name of shared object */
+#define DT_RPATH 15 /* Library search path (deprecated) */
+#define DT_SYMBOLIC 16 /* Start symbol search here */
+#define DT_REL 17 /* Address of Rel relocs */
+#define DT_RELSZ 18 /* Total size of Rel relocs */
+#define DT_RELENT 19 /* Size of one Rel reloc */
+#define DT_PLTREL 20 /* Type of reloc in PLT */
+#define DT_DEBUG 21 /* For debugging; unspecified */
+#define DT_TEXTREL 22 /* Reloc might modify .text */
+#define DT_JMPREL 23 /* Address of PLT relocs */
+#define DT_BIND_NOW 24 /* Process relocations of object */
+#define DT_INIT_ARRAY 25 /* Array with addresses of init fct */
+#define DT_FINI_ARRAY 26 /* Array with addresses of fini fct */
+#define DT_INIT_ARRAYSZ 27 /* Size in bytes of DT_INIT_ARRAY */
+#define DT_FINI_ARRAYSZ 28 /* Size in bytes of DT_FINI_ARRAY */
+#define DT_RUNPATH 29 /* Library search path */
+#define DT_FLAGS 30 /* Flags for the object being loaded */
+#define DT_ENCODING 32 /* Start of encoded range */
+#define DT_PREINIT_ARRAY 32 /* Array with addresses of preinit fct*/
+#define DT_PREINIT_ARRAYSZ 33 /* size in bytes of DT_PREINIT_ARRAY */
+#define DT_NUM 34 /* Number used */
+#define DT_LOOS 0x60000000 /* Start of OS-specific */
+#define DT_HIOS 0x6fffffff /* End of OS-specific */
+#define DT_LOPROC 0x70000000 /* Start of processor-specific */
+#define DT_HIPROC 0x7fffffff /* End of processor-specific */
+#define DT_PROCNUM DT_MIPS_NUM /* Most used by any processor */
+
+/* DT_* entries which fall between DT_VALRNGHI & DT_VALRNGLO use the
+ Dyn.d_un.d_val field of the Elf*_Dyn structure. This follows Sun's
+ approach. */
+#define DT_VALRNGLO 0x6ffffd00
+#define DT_CHECKSUM 0x6ffffdf8
+#define DT_PLTPADSZ 0x6ffffdf9
+#define DT_MOVEENT 0x6ffffdfa
+#define DT_MOVESZ 0x6ffffdfb
+#define DT_FEATURE_1 0x6ffffdfc /* Feature selection (DTF_*). */
+#define DT_POSFLAG_1 0x6ffffdfd /* Flags for DT_* entries, effecting
+ the following DT_* entry. */
+#define DT_SYMINSZ 0x6ffffdfe /* Size of syminfo table (in bytes) */
+#define DT_SYMINENT 0x6ffffdff /* Entry size of syminfo */
+#define DT_VALRNGHI 0x6ffffdff
+
+/* DT_* entries which fall between DT_ADDRRNGHI & DT_ADDRRNGLO use the
+ Dyn.d_un.d_ptr field of the Elf*_Dyn structure.
+
+ If any adjustment is made to the ELF object after it has been
+ built these entries will need to be adjusted. */
+#define DT_ADDRRNGLO 0x6ffffe00
+#define DT_CONFIG 0x6ffffefa /* Configuration information. */
+#define DT_DEPAUDIT 0x6ffffefb /* Dependency auditing. */
+#define DT_AUDIT 0x6ffffefc /* Object auditing. */
+#define DT_PLTPAD 0x6ffffefd /* PLT padding. */
+#define DT_MOVETAB 0x6ffffefe /* Move table. */
+#define DT_SYMINFO 0x6ffffeff /* Syminfo table. */
+#define DT_ADDRRNGHI 0x6ffffeff
+
+/* The versioning entry types. The next are defined as part of the
+ GNU extension. */
+#define DT_VERSYM 0x6ffffff0
+
+#define DT_RELACOUNT 0x6ffffff9
+#define DT_RELCOUNT 0x6ffffffa
+
+/* These were chosen by Sun. */
+#define DT_FLAGS_1 0x6ffffffb /* State flags, see DF_1_* below. */
+#define DT_VERDEF 0x6ffffffc /* Address of version definition
+ table */
+#define DT_VERDEFNUM 0x6ffffffd /* Number of version definitions */
+#define DT_VERNEED 0x6ffffffe /* Address of table with needed
+ versions */
+#define DT_VERNEEDNUM 0x6fffffff /* Number of needed versions */
+#define DT_VERSIONTAGIDX(tag) (DT_VERNEEDNUM - (tag)) /* Reverse order! */
+#define DT_VERSIONTAGNUM 16
+
+/* Sun added these machine-independent extensions in the "processor-specific"
+ range. Be compatible. */
+#define DT_AUXILIARY 0x7ffffffd /* Shared object to load before self */
+#define DT_FILTER 0x7fffffff /* Shared object to get values from */
+#define DT_EXTRATAGIDX(tag) ((Elf32_Word)-((Elf32_Sword) (tag) <<1>>1)-1)
+#define DT_EXTRANUM 3
+
+/* Values of `d_un.d_val' in the DT_FLAGS entry. */
+#define DF_ORIGIN 0x00000001 /* Object may use DF_ORIGIN */
+#define DF_SYMBOLIC 0x00000002 /* Symbol resolutions starts here */
+#define DF_TEXTREL 0x00000004 /* Object contains text relocations */
+#define DF_BIND_NOW 0x00000008 /* No lazy binding for this object */
+
+/* State flags selectable in the `d_un.d_val' element of the DT_FLAGS_1
+ entry in the dynamic section. */
+#define DF_1_NOW 0x00000001 /* Set RTLD_NOW for this object. */
+#define DF_1_GLOBAL 0x00000002 /* Set RTLD_GLOBAL for this object. */
+#define DF_1_GROUP 0x00000004 /* Set RTLD_GROUP for this object. */
+#define DF_1_NODELETE 0x00000008 /* Set RTLD_NODELETE for this object.*/
+#define DF_1_LOADFLTR 0x00000010 /* Trigger filtee loading at runtime.*/
+#define DF_1_INITFIRST 0x00000020 /* Set RTLD_INITFIRST for this object*/
+#define DF_1_NOOPEN 0x00000040 /* Set RTLD_NOOPEN for this object. */
+#define DF_1_ORIGIN 0x00000080 /* $ORIGIN must be handled. */
+#define DF_1_DIRECT 0x00000100 /* Direct binding enabled. */
+#define DF_1_TRANS 0x00000200
+#define DF_1_INTERPOSE 0x00000400 /* Object is used to interpose. */
+#define DF_1_NODEFLIB 0x00000800 /* Ignore default lib search path. */
+#define DF_1_NODUMP 0x00001000 /* Object can't be dldump'ed. */
+#define DF_1_CONFALT 0x00002000 /* Configuration alternative created.*/
+#define DF_1_ENDFILTEE 0x00004000 /* Filtee terminates filters search. */
+#define DF_1_DISPRELDNE 0x00008000 /* Disp reloc applied at build time. */
+#define DF_1_DISPRELPND 0x00010000 /* Disp reloc applied at run-time. */
+
+/* Flags for the feature selection in DT_FEATURE_1. */
+#define DTF_1_PARINIT 0x00000001
+#define DTF_1_CONFEXP 0x00000002
+
+/* Flags in the DT_POSFLAG_1 entry effecting only the next DT_* entry. */
+#define DF_P1_LAZYLOAD 0x00000001 /* Lazyload following object. */
+#define DF_P1_GROUPPERM 0x00000002 /* Symbols from next object are not
+ generally available. */
+
+/* Version definition sections. */
+
+typedef struct
+{
+ Elf32_Half vd_version; /* Version revision */
+ Elf32_Half vd_flags; /* Version information */
+ Elf32_Half vd_ndx; /* Version Index */
+ Elf32_Half vd_cnt; /* Number of associated aux entries */
+ Elf32_Word vd_hash; /* Version name hash value */
+ Elf32_Word vd_aux; /* Offset in bytes to verdaux array */
+ Elf32_Word vd_next; /* Offset in bytes to next verdef
+ entry */
+} Elf32_Verdef;
+
+typedef struct
+{
+ Elf64_Half vd_version; /* Version revision */
+ Elf64_Half vd_flags; /* Version information */
+ Elf64_Half vd_ndx; /* Version Index */
+ Elf64_Half vd_cnt; /* Number of associated aux entries */
+ Elf64_Word vd_hash; /* Version name hash value */
+ Elf64_Word vd_aux; /* Offset in bytes to verdaux array */
+ Elf64_Word vd_next; /* Offset in bytes to next verdef
+ entry */
+} Elf64_Verdef;
+
+
+/* Legal values for vd_version (version revision). */
+#define VER_DEF_NONE 0 /* No version */
+#define VER_DEF_CURRENT 1 /* Current version */
+#define VER_DEF_NUM 2 /* Given version number */
+
+/* Legal values for vd_flags (version information flags). */
+#define VER_FLG_BASE 0x1 /* Version definition of file itself */
+#define VER_FLG_WEAK 0x2 /* Weak version identifier */
+
+/* Versym symbol index values. */
+#define VER_NDX_LOCAL 0 /* Symbol is local. */
+#define VER_NDX_GLOBAL 1 /* Symbol is global. */
+#define VER_NDX_LORESERVE 0xff00 /* Beginning of reserved entries. */
+#define VER_NDX_ELIMINATE 0xff01 /* Symbol is to be eliminated. */
+
+/* Auxialiary version information. */
+
+typedef struct
+{
+ Elf32_Word vda_name; /* Version or dependency names */
+ Elf32_Word vda_next; /* Offset in bytes to next verdaux
+ entry */
+} Elf32_Verdaux;
+
+typedef struct
+{
+ Elf64_Word vda_name; /* Version or dependency names */
+ Elf64_Word vda_next; /* Offset in bytes to next verdaux
+ entry */
+} Elf64_Verdaux;
+
+
+/* Version dependency section. */
+
+typedef struct
+{
+ Elf32_Half vn_version; /* Version of structure */
+ Elf32_Half vn_cnt; /* Number of associated aux entries */
+ Elf32_Word vn_file; /* Offset of filename for this
+ dependency */
+ Elf32_Word vn_aux; /* Offset in bytes to vernaux array */
+ Elf32_Word vn_next; /* Offset in bytes to next verneed
+ entry */
+} Elf32_Verneed;
+
+typedef struct
+{
+ Elf64_Half vn_version; /* Version of structure */
+ Elf64_Half vn_cnt; /* Number of associated aux entries */
+ Elf64_Word vn_file; /* Offset of filename for this
+ dependency */
+ Elf64_Word vn_aux; /* Offset in bytes to vernaux array */
+ Elf64_Word vn_next; /* Offset in bytes to next verneed
+ entry */
+} Elf64_Verneed;
+
+
+/* Legal values for vn_version (version revision). */
+#define VER_NEED_NONE 0 /* No version */
+#define VER_NEED_CURRENT 1 /* Current version */
+#define VER_NEED_NUM 2 /* Given version number */
+
+/* Auxiliary needed version information. */
+
+typedef struct
+{
+ Elf32_Word vna_hash; /* Hash value of dependency name */
+ Elf32_Half vna_flags; /* Dependency specific information */
+ Elf32_Half vna_other; /* Unused */
+ Elf32_Word vna_name; /* Dependency name string offset */
+ Elf32_Word vna_next; /* Offset in bytes to next vernaux
+ entry */
+} Elf32_Vernaux;
+
+typedef struct
+{
+ Elf64_Word vna_hash; /* Hash value of dependency name */
+ Elf64_Half vna_flags; /* Dependency specific information */
+ Elf64_Half vna_other; /* Unused */
+ Elf64_Word vna_name; /* Dependency name string offset */
+ Elf64_Word vna_next; /* Offset in bytes to next vernaux
+ entry */
+} Elf64_Vernaux;
+
+
+/* Legal values for vna_flags. */
+#define VER_FLG_WEAK 0x2 /* Weak version identifier */
+
+
+/* Auxiliary vector. */
+
+/* This vector is normally only used by the program interpreter. The
+ usual definition in an ABI supplement uses the name auxv_t. The
+ vector is not usually defined in a standard <elf.h> file, but it
+ can't hurt. We rename it to avoid conflicts. The sizes of these
+ types are an arrangement between the exec server and the program
+ interpreter, so we don't fully specify them here. */
+
+typedef struct
+{
+ int a_type; /* Entry type */
+ union
+ {
+ long int a_val; /* Integer value */
+ void *a_ptr; /* Pointer value */
+ void (*a_fcn) (void); /* Function pointer value */
+ } a_un;
+} Elf32_auxv_t;
+
+typedef struct
+{
+ long int a_type; /* Entry type */
+ union
+ {
+ long int a_val; /* Integer value */
+ void *a_ptr; /* Pointer value */
+ void (*a_fcn) (void); /* Function pointer value */
+ } a_un;
+} Elf64_auxv_t;
+
+/* Legal values for a_type (entry type). */
+
+#define AT_NULL 0 /* End of vector */
+#define AT_IGNORE 1 /* Entry should be ignored */
+#define AT_EXECFD 2 /* File descriptor of program */
+#define AT_PHDR 3 /* Program headers for program */
+#define AT_PHENT 4 /* Size of program header entry */
+#define AT_PHNUM 5 /* Number of program headers */
+#define AT_PAGESZ 6 /* System page size */
+#define AT_BASE 7 /* Base address of interpreter */
+#define AT_FLAGS 8 /* Flags */
+#define AT_ENTRY 9 /* Entry point of program */
+#define AT_NOTELF 10 /* Program is not ELF */
+#define AT_UID 11 /* Real uid */
+#define AT_EUID 12 /* Effective uid */
+#define AT_GID 13 /* Real gid */
+#define AT_EGID 14 /* Effective gid */
+#define AT_CLKTCK 17 /* Frequency of times() */
+
+/* Some more special a_type values describing the hardware. */
+#define AT_PLATFORM 15 /* String identifying platform. */
+#define AT_HWCAP 16 /* Machine dependent hints about
+ processor capabilities. */
+
+/* This entry gives some information about the FPU initialization
+ performed by the kernel. */
+#define AT_FPUCW 18 /* Used FPU control word. */
+
+/* Cache block sizes. */
+#define AT_DCACHEBSIZE 19 /* Data cache block size. */
+#define AT_ICACHEBSIZE 20 /* Instruction cache block size. */
+#define AT_UCACHEBSIZE 21 /* Unified cache block size. */
+
+/* A special ignored value for PPC, used by the kernel to control the
+ interpretation of the AUXV. Must be > 16. */
+#define AT_IGNOREPPC 22 /* Entry should be ignored */
+
+
+/* Note section contents. Each entry in the note section begins with
+ a header of a fixed form. */
+
+typedef struct
+{
+ Elf32_Word n_namesz; /* Length of the note's name. */
+ Elf32_Word n_descsz; /* Length of the note's descriptor. */
+ Elf32_Word n_type; /* Type of the note. */
+} Elf32_Nhdr;
+
+typedef struct
+{
+ Elf64_Word n_namesz; /* Length of the note's name. */
+ Elf64_Word n_descsz; /* Length of the note's descriptor. */
+ Elf64_Word n_type; /* Type of the note. */
+} Elf64_Nhdr;
+
+/* Known names of notes. */
+
+/* Solaris entries in the note section have this name. */
+#define ELF_NOTE_SOLARIS "SUNW Solaris"
+
+/* Note entries for GNU systems have this name. */
+#define ELF_NOTE_GNU "GNU"
+
+
+/* Defined types of notes for Solaris. */
+
+/* Value of descriptor (one word) is desired pagesize for the binary. */
+#define ELF_NOTE_PAGESIZE_HINT 1
+
+
+/* Defined note types for GNU systems. */
+
+/* ABI information. The descriptor consists of words:
+ word 0: OS descriptor
+ word 1: major version of the ABI
+ word 2: minor version of the ABI
+ word 3: subminor version of the ABI
+*/
+#define ELF_NOTE_ABI 1
+
+/* Known OSes. These value can appear in word 0 of an ELF_NOTE_ABI
+ note section entry. */
+#define ELF_NOTE_OS_LINUX 0
+#define ELF_NOTE_OS_GNU 1
+#define ELF_NOTE_OS_SOLARIS2 2
+
+
+/* Move records. */
+typedef struct
+{
+ Elf32_Xword m_value; /* Symbol value. */
+ Elf32_Word m_info; /* Size and index. */
+ Elf32_Word m_poffset; /* Symbol offset. */
+ Elf32_Half m_repeat; /* Repeat count. */
+ Elf32_Half m_stride; /* Stride info. */
+} Elf32_Move;
+
+typedef struct
+{
+ Elf64_Xword m_value; /* Symbol value. */
+ Elf64_Xword m_info; /* Size and index. */
+ Elf64_Xword m_poffset; /* Symbol offset. */
+ Elf64_Half m_repeat; /* Repeat count. */
+ Elf64_Half m_stride; /* Stride info. */
+} Elf64_Move;
+
+/* Macro to construct move records. */
+#define ELF32_M_SYM(info) ((info) >> 8)
+#define ELF32_M_SIZE(info) ((unsigned char) (info))
+#define ELF32_M_INFO(sym, size) (((sym) << 8) + (unsigned char) (size))
+
+#define ELF64_M_SYM(info) ELF32_M_SYM (info)
+#define ELF64_M_SIZE(info) ELF32_M_SIZE (info)
+#define ELF64_M_INFO(sym, size) ELF32_M_INFO (sym, size)
+
+
+/* Motorola 68k specific definitions. */
+
+/* Values for Elf32_Ehdr.e_flags. */
+#define EF_CPU32 0x00810000
+
+/* m68k relocs. */
+
+#define R_68K_NONE 0 /* No reloc */
+#define R_68K_32 1 /* Direct 32 bit */
+#define R_68K_16 2 /* Direct 16 bit */
+#define R_68K_8 3 /* Direct 8 bit */
+#define R_68K_PC32 4 /* PC relative 32 bit */
+#define R_68K_PC16 5 /* PC relative 16 bit */
+#define R_68K_PC8 6 /* PC relative 8 bit */
+#define R_68K_GOT32 7 /* 32 bit PC relative GOT entry */
+#define R_68K_GOT16 8 /* 16 bit PC relative GOT entry */
+#define R_68K_GOT8 9 /* 8 bit PC relative GOT entry */
+#define R_68K_GOT32O 10 /* 32 bit GOT offset */
+#define R_68K_GOT16O 11 /* 16 bit GOT offset */
+#define R_68K_GOT8O 12 /* 8 bit GOT offset */
+#define R_68K_PLT32 13 /* 32 bit PC relative PLT address */
+#define R_68K_PLT16 14 /* 16 bit PC relative PLT address */
+#define R_68K_PLT8 15 /* 8 bit PC relative PLT address */
+#define R_68K_PLT32O 16 /* 32 bit PLT offset */
+#define R_68K_PLT16O 17 /* 16 bit PLT offset */
+#define R_68K_PLT8O 18 /* 8 bit PLT offset */
+#define R_68K_COPY 19 /* Copy symbol at runtime */
+#define R_68K_GLOB_DAT 20 /* Create GOT entry */
+#define R_68K_JMP_SLOT 21 /* Create PLT entry */
+#define R_68K_RELATIVE 22 /* Adjust by program base */
+/* Keep this the last entry. */
+#define R_68K_NUM 23
+
+/* Intel 80386 specific definitions. */
+
+/* i386 relocs. */
+
+#define R_386_NONE 0 /* No reloc */
+#define R_386_32 1 /* Direct 32 bit */
+#define R_386_PC32 2 /* PC relative 32 bit */
+#define R_386_GOT32 3 /* 32 bit GOT entry */
+#define R_386_PLT32 4 /* 32 bit PLT address */
+#define R_386_COPY 5 /* Copy symbol at runtime */
+#define R_386_GLOB_DAT 6 /* Create GOT entry */
+#define R_386_JMP_SLOT 7 /* Create PLT entry */
+#define R_386_RELATIVE 8 /* Adjust by program base */
+#define R_386_GOTOFF 9 /* 32 bit offset to GOT */
+#define R_386_GOTPC 10 /* 32 bit PC relative offset to GOT */
+/* Keep this the last entry. */
+#define R_386_NUM 11
+
+/* SUN SPARC specific definitions. */
+
+/* Legal values for ST_TYPE subfield of st_info (symbol type). */
+
+#define STT_REGISTER 13 /* Global register reserved to app. */
+
+/* Values for Elf64_Ehdr.e_flags. */
+
+#define EF_SPARCV9_MM 3
+#define EF_SPARCV9_TSO 0
+#define EF_SPARCV9_PSO 1
+#define EF_SPARCV9_RMO 2
+#define EF_SPARC_LEDATA 0x800000 /* little endian data */
+#define EF_SPARC_EXT_MASK 0xFFFF00
+#define EF_SPARC_32PLUS 0x000100 /* generic V8+ features */
+#define EF_SPARC_SUN_US1 0x000200 /* Sun UltraSPARC1 extensions */
+#define EF_SPARC_HAL_R1 0x000400 /* HAL R1 extensions */
+#define EF_SPARC_SUN_US3 0x000800 /* Sun UltraSPARCIII extensions */
+
+/* SPARC relocs. */
+
+#define R_SPARC_NONE 0 /* No reloc */
+#define R_SPARC_8 1 /* Direct 8 bit */
+#define R_SPARC_16 2 /* Direct 16 bit */
+#define R_SPARC_32 3 /* Direct 32 bit */
+#define R_SPARC_DISP8 4 /* PC relative 8 bit */
+#define R_SPARC_DISP16 5 /* PC relative 16 bit */
+#define R_SPARC_DISP32 6 /* PC relative 32 bit */
+#define R_SPARC_WDISP30 7 /* PC relative 30 bit shifted */
+#define R_SPARC_WDISP22 8 /* PC relative 22 bit shifted */
+#define R_SPARC_HI22 9 /* High 22 bit */
+#define R_SPARC_22 10 /* Direct 22 bit */
+#define R_SPARC_13 11 /* Direct 13 bit */
+#define R_SPARC_LO10 12 /* Truncated 10 bit */
+#define R_SPARC_GOT10 13 /* Truncated 10 bit GOT entry */
+#define R_SPARC_GOT13 14 /* 13 bit GOT entry */
+#define R_SPARC_GOT22 15 /* 22 bit GOT entry shifted */
+#define R_SPARC_PC10 16 /* PC relative 10 bit truncated */
+#define R_SPARC_PC22 17 /* PC relative 22 bit shifted */
+#define R_SPARC_WPLT30 18 /* 30 bit PC relative PLT address */
+#define R_SPARC_COPY 19 /* Copy symbol at runtime */
+#define R_SPARC_GLOB_DAT 20 /* Create GOT entry */
+#define R_SPARC_JMP_SLOT 21 /* Create PLT entry */
+#define R_SPARC_RELATIVE 22 /* Adjust by program base */
+#define R_SPARC_UA32 23 /* Direct 32 bit unaligned */
+
+/* Additional Sparc64 relocs. */
+
+#define R_SPARC_PLT32 24 /* Direct 32 bit ref to PLT entry */
+#define R_SPARC_HIPLT22 25 /* High 22 bit PLT entry */
+#define R_SPARC_LOPLT10 26 /* Truncated 10 bit PLT entry */
+#define R_SPARC_PCPLT32 27 /* PC rel 32 bit ref to PLT entry */
+#define R_SPARC_PCPLT22 28 /* PC rel high 22 bit PLT entry */
+#define R_SPARC_PCPLT10 29 /* PC rel trunc 10 bit PLT entry */
+#define R_SPARC_10 30 /* Direct 10 bit */
+#define R_SPARC_11 31 /* Direct 11 bit */
+#define R_SPARC_64 32 /* Direct 64 bit */
+#define R_SPARC_OLO10 33 /* 10bit with secondary 13bit addend */
+#define R_SPARC_HH22 34 /* Top 22 bits of direct 64 bit */
+#define R_SPARC_HM10 35 /* High middle 10 bits of ... */
+#define R_SPARC_LM22 36 /* Low middle 22 bits of ... */
+#define R_SPARC_PC_HH22 37 /* Top 22 bits of pc rel 64 bit */
+#define R_SPARC_PC_HM10 38 /* High middle 10 bit of ... */
+#define R_SPARC_PC_LM22 39 /* Low miggle 22 bits of ... */
+#define R_SPARC_WDISP16 40 /* PC relative 16 bit shifted */
+#define R_SPARC_WDISP19 41 /* PC relative 19 bit shifted */
+#define R_SPARC_7 43 /* Direct 7 bit */
+#define R_SPARC_5 44 /* Direct 5 bit */
+#define R_SPARC_6 45 /* Direct 6 bit */
+#define R_SPARC_DISP64 46 /* PC relative 64 bit */
+#define R_SPARC_PLT64 47 /* Direct 64 bit ref to PLT entry */
+#define R_SPARC_HIX22 48 /* High 22 bit complemented */
+#define R_SPARC_LOX10 49 /* Truncated 11 bit complemented */
+#define R_SPARC_H44 50 /* Direct high 12 of 44 bit */
+#define R_SPARC_M44 51 /* Direct mid 22 of 44 bit */
+#define R_SPARC_L44 52 /* Direct low 10 of 44 bit */
+#define R_SPARC_REGISTER 53 /* Global register usage */
+#define R_SPARC_UA64 54 /* Direct 64 bit unaligned */
+#define R_SPARC_UA16 55 /* Direct 16 bit unaligned */
+/* Keep this the last entry. */
+#define R_SPARC_NUM 56
+
+/* For Sparc64, legal values for d_tag of Elf64_Dyn. */
+
+#define DT_SPARC_REGISTER 0x70000001
+#define DT_SPARC_NUM 2
+
+/* Bits present in AT_HWCAP, primarily for Sparc32. */
+
+#define HWCAP_SPARC_FLUSH 1 /* The cpu supports flush insn. */
+#define HWCAP_SPARC_STBAR 2
+#define HWCAP_SPARC_SWAP 4
+#define HWCAP_SPARC_MULDIV 8
+#define HWCAP_SPARC_V9 16 /* The cpu is v9, so v8plus is ok. */
+#define HWCAP_SPARC_ULTRA3 32
+
+/* MIPS R3000 specific definitions. */
+
+/* Legal values for e_flags field of Elf32_Ehdr. */
+
+#define EF_MIPS_NOREORDER 1 /* A .noreorder directive was used */
+#define EF_MIPS_PIC 2 /* Contains PIC code */
+#define EF_MIPS_CPIC 4 /* Uses PIC calling sequence */
+#define EF_MIPS_XGOT 8
+#define EF_MIPS_64BIT_WHIRL 16
+#define EF_MIPS_ABI2 32
+#define EF_MIPS_ABI_ON32 64
+#define EF_MIPS_ARCH 0xf0000000 /* MIPS architecture level */
+
+/* Legal values for MIPS architecture level. */
+
+#define EF_MIPS_ARCH_1 0x00000000 /* -mips1 code. */
+#define EF_MIPS_ARCH_2 0x10000000 /* -mips2 code. */
+#define EF_MIPS_ARCH_3 0x20000000 /* -mips3 code. */
+#define EF_MIPS_ARCH_4 0x30000000 /* -mips4 code. */
+#define EF_MIPS_ARCH_5 0x40000000 /* -mips5 code. */
+#define EF_MIPS_ARCH_32 0x60000000 /* MIPS32 code. */
+#define EF_MIPS_ARCH_64 0x70000000 /* MIPS64 code. */
+
+/* The following are non-official names and should not be used. */
+
+#define E_MIPS_ARCH_1 0x00000000 /* -mips1 code. */
+#define E_MIPS_ARCH_2 0x10000000 /* -mips2 code. */
+#define E_MIPS_ARCH_3 0x20000000 /* -mips3 code. */
+#define E_MIPS_ARCH_4 0x30000000 /* -mips4 code. */
+#define E_MIPS_ARCH_5 0x40000000 /* -mips5 code. */
+#define E_MIPS_ARCH_32 0x60000000 /* MIPS32 code. */
+#define E_MIPS_ARCH_64 0x70000000 /* MIPS64 code. */
+
+/* Special section indices. */
+
+#define SHN_MIPS_ACOMMON 0xff00 /* Allocated common symbols */
+#define SHN_MIPS_TEXT 0xff01 /* Allocated test symbols. */
+#define SHN_MIPS_DATA 0xff02 /* Allocated data symbols. */
+#define SHN_MIPS_SCOMMON 0xff03 /* Small common symbols */
+#define SHN_MIPS_SUNDEFINED 0xff04 /* Small undefined symbols */
+
+/* Legal values for sh_type field of Elf32_Shdr. */
+
+#define SHT_MIPS_LIBLIST 0x70000000 /* Shared objects used in link */
+#define SHT_MIPS_MSYM 0x70000001
+#define SHT_MIPS_CONFLICT 0x70000002 /* Conflicting symbols */
+#define SHT_MIPS_GPTAB 0x70000003 /* Global data area sizes */
+#define SHT_MIPS_UCODE 0x70000004 /* Reserved for SGI/MIPS compilers */
+#define SHT_MIPS_DEBUG 0x70000005 /* MIPS ECOFF debugging information*/
+#define SHT_MIPS_REGINFO 0x70000006 /* Register usage information */
+#define SHT_MIPS_PACKAGE 0x70000007
+#define SHT_MIPS_PACKSYM 0x70000008
+#define SHT_MIPS_RELD 0x70000009
+#define SHT_MIPS_IFACE 0x7000000b
+#define SHT_MIPS_CONTENT 0x7000000c
+#define SHT_MIPS_OPTIONS 0x7000000d /* Miscellaneous options. */
+#define SHT_MIPS_SHDR 0x70000010
+#define SHT_MIPS_FDESC 0x70000011
+#define SHT_MIPS_EXTSYM 0x70000012
+#define SHT_MIPS_DENSE 0x70000013
+#define SHT_MIPS_PDESC 0x70000014
+#define SHT_MIPS_LOCSYM 0x70000015
+#define SHT_MIPS_AUXSYM 0x70000016
+#define SHT_MIPS_OPTSYM 0x70000017
+#define SHT_MIPS_LOCSTR 0x70000018
+#define SHT_MIPS_LINE 0x70000019
+#define SHT_MIPS_RFDESC 0x7000001a
+#define SHT_MIPS_DELTASYM 0x7000001b
+#define SHT_MIPS_DELTAINST 0x7000001c
+#define SHT_MIPS_DELTACLASS 0x7000001d
+#define SHT_MIPS_DWARF 0x7000001e /* DWARF debugging information. */
+#define SHT_MIPS_DELTADECL 0x7000001f
+#define SHT_MIPS_SYMBOL_LIB 0x70000020
+#define SHT_MIPS_EVENTS 0x70000021 /* Event section. */
+#define SHT_MIPS_TRANSLATE 0x70000022
+#define SHT_MIPS_PIXIE 0x70000023
+#define SHT_MIPS_XLATE 0x70000024
+#define SHT_MIPS_XLATE_DEBUG 0x70000025
+#define SHT_MIPS_WHIRL 0x70000026
+#define SHT_MIPS_EH_REGION 0x70000027
+#define SHT_MIPS_XLATE_OLD 0x70000028
+#define SHT_MIPS_PDR_EXCEPTION 0x70000029
+
+/* Legal values for sh_flags field of Elf32_Shdr. */
+
+#define SHF_MIPS_GPREL 0x10000000 /* Must be part of global data area */
+#define SHF_MIPS_MERGE 0x20000000
+#define SHF_MIPS_ADDR 0x40000000
+#define SHF_MIPS_STRINGS 0x80000000
+#define SHF_MIPS_NOSTRIP 0x08000000
+#define SHF_MIPS_LOCAL 0x04000000
+#define SHF_MIPS_NAMES 0x02000000
+#define SHF_MIPS_NODUPE 0x01000000
+
+
+/* Symbol tables. */
+
+/* MIPS specific values for `st_other'. */
+#define STO_MIPS_DEFAULT 0x0
+#define STO_MIPS_INTERNAL 0x1
+#define STO_MIPS_HIDDEN 0x2
+#define STO_MIPS_PROTECTED 0x3
+#define STO_MIPS_SC_ALIGN_UNUSED 0xff
+
+/* MIPS specific values for `st_info'. */
+#define STB_MIPS_SPLIT_COMMON 13
+
+/* Entries found in sections of type SHT_MIPS_GPTAB. */
+
+typedef union
+{
+ struct
+ {
+ Elf32_Word gt_current_g_value; /* -G value used for compilation */
+ Elf32_Word gt_unused; /* Not used */
+ } gt_header; /* First entry in section */
+ struct
+ {
+ Elf32_Word gt_g_value; /* If this value were used for -G */
+ Elf32_Word gt_bytes; /* This many bytes would be used */
+ } gt_entry; /* Subsequent entries in section */
+} Elf32_gptab;
+
+/* Entry found in sections of type SHT_MIPS_REGINFO. */
+
+typedef struct
+{
+ Elf32_Word ri_gprmask; /* General registers used */
+ Elf32_Word ri_cprmask[4]; /* Coprocessor registers used */
+ Elf32_Sword ri_gp_value; /* $gp register value */
+} Elf32_RegInfo;
+
+/* Entries found in sections of type SHT_MIPS_OPTIONS. */
+
+typedef struct
+{
+ unsigned char kind; /* Determines interpretation of the
+ variable part of descriptor. */
+ unsigned char size; /* Size of descriptor, including header. */
+ Elf32_Section section; /* Section header index of section affected,
+ 0 for global options. */
+ Elf32_Word info; /* Kind-specific information. */
+} Elf_Options;
+
+/* Values for `kind' field in Elf_Options. */
+
+#define ODK_NULL 0 /* Undefined. */
+#define ODK_REGINFO 1 /* Register usage information. */
+#define ODK_EXCEPTIONS 2 /* Exception processing options. */
+#define ODK_PAD 3 /* Section padding options. */
+#define ODK_HWPATCH 4 /* Hardware workarounds performed */
+#define ODK_FILL 5 /* record the fill value used by the linker. */
+#define ODK_TAGS 6 /* reserve space for desktop tools to write. */
+#define ODK_HWAND 7 /* HW workarounds. 'AND' bits when merging. */
+#define ODK_HWOR 8 /* HW workarounds. 'OR' bits when merging. */
+
+/* Values for `info' in Elf_Options for ODK_EXCEPTIONS entries. */
+
+#define OEX_FPU_MIN 0x1f /* FPE's which MUST be enabled. */
+#define OEX_FPU_MAX 0x1f00 /* FPE's which MAY be enabled. */
+#define OEX_PAGE0 0x10000 /* page zero must be mapped. */
+#define OEX_SMM 0x20000 /* Force sequential memory mode? */
+#define OEX_FPDBUG 0x40000 /* Force floating point debug mode? */
+#define OEX_PRECISEFP OEX_FPDBUG
+#define OEX_DISMISS 0x80000 /* Dismiss invalid address faults? */
+
+#define OEX_FPU_INVAL 0x10
+#define OEX_FPU_DIV0 0x08
+#define OEX_FPU_OFLO 0x04
+#define OEX_FPU_UFLO 0x02
+#define OEX_FPU_INEX 0x01
+
+/* Masks for `info' in Elf_Options for an ODK_HWPATCH entry. */
+
+#define OHW_R4KEOP 0x1 /* R4000 end-of-page patch. */
+#define OHW_R8KPFETCH 0x2 /* may need R8000 prefetch patch. */
+#define OHW_R5KEOP 0x4 /* R5000 end-of-page patch. */
+#define OHW_R5KCVTL 0x8 /* R5000 cvt.[ds].l bug. clean=1. */
+
+#define OPAD_PREFIX 0x1
+#define OPAD_POSTFIX 0x2
+#define OPAD_SYMBOL 0x4
+
+/* Entry found in `.options' section. */
+
+typedef struct
+{
+ Elf32_Word hwp_flags1; /* Extra flags. */
+ Elf32_Word hwp_flags2; /* Extra flags. */
+} Elf_Options_Hw;
+
+/* Masks for `info' in ElfOptions for ODK_HWAND and ODK_HWOR entries. */
+
+#define OHWA0_R4KEOP_CHECKED 0x00000001
+#define OHWA1_R4KEOP_CLEAN 0x00000002
+
+/* MIPS relocs. */
+
+#define R_MIPS_NONE 0 /* No reloc */
+#define R_MIPS_16 1 /* Direct 16 bit */
+#define R_MIPS_32 2 /* Direct 32 bit */
+#define R_MIPS_REL32 3 /* PC relative 32 bit */
+#define R_MIPS_26 4 /* Direct 26 bit shifted */
+#define R_MIPS_HI16 5 /* High 16 bit */
+#define R_MIPS_LO16 6 /* Low 16 bit */
+#define R_MIPS_GPREL16 7 /* GP relative 16 bit */
+#define R_MIPS_LITERAL 8 /* 16 bit literal entry */
+#define R_MIPS_GOT16 9 /* 16 bit GOT entry */
+#define R_MIPS_PC16 10 /* PC relative 16 bit */
+#define R_MIPS_CALL16 11 /* 16 bit GOT entry for function */
+#define R_MIPS_GPREL32 12 /* GP relative 32 bit */
+
+#define R_MIPS_SHIFT5 16
+#define R_MIPS_SHIFT6 17
+#define R_MIPS_64 18
+#define R_MIPS_GOT_DISP 19
+#define R_MIPS_GOT_PAGE 20
+#define R_MIPS_GOT_OFST 21
+#define R_MIPS_GOT_HI16 22
+#define R_MIPS_GOT_LO16 23
+#define R_MIPS_SUB 24
+#define R_MIPS_INSERT_A 25
+#define R_MIPS_INSERT_B 26
+#define R_MIPS_DELETE 27
+#define R_MIPS_HIGHER 28
+#define R_MIPS_HIGHEST 29
+#define R_MIPS_CALL_HI16 30
+#define R_MIPS_CALL_LO16 31
+#define R_MIPS_SCN_DISP 32
+#define R_MIPS_REL16 33
+#define R_MIPS_ADD_IMMEDIATE 34
+#define R_MIPS_PJUMP 35
+#define R_MIPS_RELGOT 36
+#define R_MIPS_JALR 37
+/* Keep this the last entry. */
+#define R_MIPS_NUM 38
+
+/* Legal values for p_type field of Elf32_Phdr. */
+
+#define PT_MIPS_REGINFO 0x70000000 /* Register usage information */
+#define PT_MIPS_RTPROC 0x70000001 /* Runtime procedure table. */
+#define PT_MIPS_OPTIONS 0x70000002
+
+/* Special program header types. */
+
+#define PF_MIPS_LOCAL 0x10000000
+
+/* Legal values for d_tag field of Elf32_Dyn. */
+
+#define DT_MIPS_RLD_VERSION 0x70000001 /* Runtime linker interface version */
+#define DT_MIPS_TIME_STAMP 0x70000002 /* Timestamp */
+#define DT_MIPS_ICHECKSUM 0x70000003 /* Checksum */
+#define DT_MIPS_IVERSION 0x70000004 /* Version string (string tbl index) */
+#define DT_MIPS_FLAGS 0x70000005 /* Flags */
+#define DT_MIPS_BASE_ADDRESS 0x70000006 /* Base address */
+#define DT_MIPS_MSYM 0x70000007
+#define DT_MIPS_CONFLICT 0x70000008 /* Address of CONFLICT section */
+#define DT_MIPS_LIBLIST 0x70000009 /* Address of LIBLIST section */
+#define DT_MIPS_LOCAL_GOTNO 0x7000000a /* Number of local GOT entries */
+#define DT_MIPS_CONFLICTNO 0x7000000b /* Number of CONFLICT entries */
+#define DT_MIPS_LIBLISTNO 0x70000010 /* Number of LIBLIST entries */
+#define DT_MIPS_SYMTABNO 0x70000011 /* Number of DYNSYM entries */
+#define DT_MIPS_UNREFEXTNO 0x70000012 /* First external DYNSYM */
+#define DT_MIPS_GOTSYM 0x70000013 /* First GOT entry in DYNSYM */
+#define DT_MIPS_HIPAGENO 0x70000014 /* Number of GOT page table entries */
+#define DT_MIPS_RLD_MAP 0x70000016 /* Address of run time loader map. */
+#define DT_MIPS_DELTA_CLASS 0x70000017 /* Delta C++ class definition. */
+#define DT_MIPS_DELTA_CLASS_NO 0x70000018 /* Number of entries in
+ DT_MIPS_DELTA_CLASS. */
+#define DT_MIPS_DELTA_INSTANCE 0x70000019 /* Delta C++ class instances. */
+#define DT_MIPS_DELTA_INSTANCE_NO 0x7000001a /* Number of entries in
+ DT_MIPS_DELTA_INSTANCE. */
+#define DT_MIPS_DELTA_RELOC 0x7000001b /* Delta relocations. */
+#define DT_MIPS_DELTA_RELOC_NO 0x7000001c /* Number of entries in
+ DT_MIPS_DELTA_RELOC. */
+#define DT_MIPS_DELTA_SYM 0x7000001d /* Delta symbols that Delta
+ relocations refer to. */
+#define DT_MIPS_DELTA_SYM_NO 0x7000001e /* Number of entries in
+ DT_MIPS_DELTA_SYM. */
+#define DT_MIPS_DELTA_CLASSSYM 0x70000020 /* Delta symbols that hold the
+ class declaration. */
+#define DT_MIPS_DELTA_CLASSSYM_NO 0x70000021 /* Number of entries in
+ DT_MIPS_DELTA_CLASSSYM. */
+#define DT_MIPS_CXX_FLAGS 0x70000022 /* Flags indicating for C++ flavor. */
+#define DT_MIPS_PIXIE_INIT 0x70000023
+#define DT_MIPS_SYMBOL_LIB 0x70000024
+#define DT_MIPS_LOCALPAGE_GOTIDX 0x70000025
+#define DT_MIPS_LOCAL_GOTIDX 0x70000026
+#define DT_MIPS_HIDDEN_GOTIDX 0x70000027
+#define DT_MIPS_PROTECTED_GOTIDX 0x70000028
+#define DT_MIPS_OPTIONS 0x70000029 /* Address of .options. */
+#define DT_MIPS_INTERFACE 0x7000002a /* Address of .interface. */
+#define DT_MIPS_DYNSTR_ALIGN 0x7000002b
+#define DT_MIPS_INTERFACE_SIZE 0x7000002c /* Size of the .interface section. */
+#define DT_MIPS_RLD_TEXT_RESOLVE_ADDR 0x7000002d /* Address of rld_text_rsolve
+ function stored in GOT. */
+#define DT_MIPS_PERF_SUFFIX 0x7000002e /* Default suffix of dso to be added
+ by rld on dlopen() calls. */
+#define DT_MIPS_COMPACT_SIZE 0x7000002f /* (O32)Size of compact rel section. */
+#define DT_MIPS_GP_VALUE 0x70000030 /* GP value for aux GOTs. */
+#define DT_MIPS_AUX_DYNAMIC 0x70000031 /* Address of aux .dynamic. */
+#define DT_MIPS_NUM 0x32
+
+/* Legal values for DT_MIPS_FLAGS Elf32_Dyn entry. */
+
+#define RHF_NONE 0 /* No flags */
+#define RHF_QUICKSTART (1 << 0) /* Use quickstart */
+#define RHF_NOTPOT (1 << 1) /* Hash size not power of 2 */
+#define RHF_NO_LIBRARY_REPLACEMENT (1 << 2) /* Ignore LD_LIBRARY_PATH */
+#define RHF_NO_MOVE (1 << 3)
+#define RHF_SGI_ONLY (1 << 4)
+#define RHF_GUARANTEE_INIT (1 << 5)
+#define RHF_DELTA_C_PLUS_PLUS (1 << 6)
+#define RHF_GUARANTEE_START_INIT (1 << 7)
+#define RHF_PIXIE (1 << 8)
+#define RHF_DEFAULT_DELAY_LOAD (1 << 9)
+#define RHF_REQUICKSTART (1 << 10)
+#define RHF_REQUICKSTARTED (1 << 11)
+#define RHF_CORD (1 << 12)
+#define RHF_NO_UNRES_UNDEF (1 << 13)
+#define RHF_RLD_ORDER_SAFE (1 << 14)
+
+/* Entries found in sections of type SHT_MIPS_LIBLIST. */
+
+typedef struct
+{
+ Elf32_Word l_name; /* Name (string table index) */
+ Elf32_Word l_time_stamp; /* Timestamp */
+ Elf32_Word l_checksum; /* Checksum */
+ Elf32_Word l_version; /* Interface version */
+ Elf32_Word l_flags; /* Flags */
+} Elf32_Lib;
+
+typedef struct
+{
+ Elf64_Word l_name; /* Name (string table index) */
+ Elf64_Word l_time_stamp; /* Timestamp */
+ Elf64_Word l_checksum; /* Checksum */
+ Elf64_Word l_version; /* Interface version */
+ Elf64_Word l_flags; /* Flags */
+} Elf64_Lib;
+
+
+/* Legal values for l_flags. */
+
+#define LL_NONE 0
+#define LL_EXACT_MATCH (1 << 0) /* Require exact match */
+#define LL_IGNORE_INT_VER (1 << 1) /* Ignore interface version */
+#define LL_REQUIRE_MINOR (1 << 2)
+#define LL_EXPORTS (1 << 3)
+#define LL_DELAY_LOAD (1 << 4)
+#define LL_DELTA (1 << 5)
+
+/* Entries found in sections of type SHT_MIPS_CONFLICT. */
+
+typedef Elf32_Addr Elf32_Conflict;
+
+
+/* HPPA specific definitions. */
+
+/* Legal values for e_flags field of Elf32_Ehdr. */
+
+#define EF_PARISC_TRAPNIL 0x00010000 /* Trap nil pointer dereference. */
+#define EF_PARISC_EXT 0x00020000 /* Program uses arch. extensions. */
+#define EF_PARISC_LSB 0x00040000 /* Program expects little endian. */
+#define EF_PARISC_WIDE 0x00080000 /* Program expects wide mode. */
+#define EF_PARISC_NO_KABP 0x00100000 /* No kernel assisted branch
+ prediction. */
+#define EF_PARISC_LAZYSWAP 0x00400000 /* Allow lazy swapping. */
+#define EF_PARISC_ARCH 0x0000ffff /* Architecture version. */
+
+/* Defined values for `e_flags & EF_PARISC_ARCH' are: */
+
+#define EFA_PARISC_1_0 0x020b /* PA-RISC 1.0 big-endian. */
+#define EFA_PARISC_1_1 0x0210 /* PA-RISC 1.1 big-endian. */
+#define EFA_PARISC_2_0 0x0214 /* PA-RISC 2.0 big-endian. */
+
+/* Additional section indeces. */
+
+#define SHN_PARISC_ANSI_COMMON 0xff00 /* Section for tenatively declared
+ symbols in ANSI C. */
+#define SHN_PARISC_HUGE_COMMON 0xff01 /* Common blocks in huge model. */
+
+/* Legal values for sh_type field of Elf32_Shdr. */
+
+#define SHT_PARISC_EXT 0x70000000 /* Contains product specific ext. */
+#define SHT_PARISC_UNWIND 0x70000001 /* Unwind information. */
+#define SHT_PARISC_DOC 0x70000002 /* Debug info for optimized code. */
+
+/* Legal values for sh_flags field of Elf32_Shdr. */
+
+#define SHF_PARISC_SHORT 0x20000000 /* Section with short addressing. */
+#define SHF_PARISC_HUGE 0x40000000 /* Section far from gp. */
+#define SHF_PARISC_SBP 0x80000000 /* Static branch prediction code. */
+
+/* Legal values for ST_TYPE subfield of st_info (symbol type). */
+
+#define STT_PARISC_MILLICODE 13 /* Millicode function entry point. */
+
+#define STT_HP_OPAQUE (STT_LOOS + 0x1)
+#define STT_HP_STUB (STT_LOOS + 0x2)
+
+/* HPPA relocs. */
+
+#define R_PARISC_NONE 0 /* No reloc. */
+#define R_PARISC_DIR32 1 /* Direct 32-bit reference. */
+#define R_PARISC_DIR21L 2 /* Left 21 bits of eff. address. */
+#define R_PARISC_DIR17R 3 /* Right 17 bits of eff. address. */
+#define R_PARISC_DIR17F 4 /* 17 bits of eff. address. */
+#define R_PARISC_DIR14R 6 /* Right 14 bits of eff. address. */
+#define R_PARISC_PCREL32 9 /* 32-bit rel. address. */
+#define R_PARISC_PCREL21L 10 /* Left 21 bits of rel. address. */
+#define R_PARISC_PCREL17R 11 /* Right 17 bits of rel. address. */
+#define R_PARISC_PCREL17F 12 /* 17 bits of rel. address. */
+#define R_PARISC_PCREL14R 14 /* Right 14 bits of rel. address. */
+#define R_PARISC_DPREL21L 18 /* Left 21 bits of rel. address. */
+#define R_PARISC_DPREL14R 22 /* Right 14 bits of rel. address. */
+#define R_PARISC_GPREL21L 26 /* GP-relative, left 21 bits. */
+#define R_PARISC_GPREL14R 30 /* GP-relative, right 14 bits. */
+#define R_PARISC_LTOFF21L 34 /* LT-relative, left 21 bits. */
+#define R_PARISC_LTOFF14R 38 /* LT-relative, right 14 bits. */
+#define R_PARISC_SECREL32 41 /* 32 bits section rel. address. */
+#define R_PARISC_SEGBASE 48 /* No relocation, set segment base. */
+#define R_PARISC_SEGREL32 49 /* 32 bits segment rel. address. */
+#define R_PARISC_PLTOFF21L 50 /* PLT rel. address, left 21 bits. */
+#define R_PARISC_PLTOFF14R 54 /* PLT rel. address, right 14 bits. */
+#define R_PARISC_LTOFF_FPTR32 57 /* 32 bits LT-rel. function pointer. */
+#define R_PARISC_LTOFF_FPTR21L 58 /* LT-rel. fct ptr, left 21 bits. */
+#define R_PARISC_LTOFF_FPTR14R 62 /* LT-rel. fct ptr, right 14 bits. */
+#define R_PARISC_FPTR64 64 /* 64 bits function address. */
+#define R_PARISC_PLABEL32 65 /* 32 bits function address. */
+#define R_PARISC_PCREL64 72 /* 64 bits PC-rel. address. */
+#define R_PARISC_PCREL22F 74 /* 22 bits PC-rel. address. */
+#define R_PARISC_PCREL14WR 75 /* PC-rel. address, right 14 bits. */
+#define R_PARISC_PCREL14DR 76 /* PC rel. address, right 14 bits. */
+#define R_PARISC_PCREL16F 77 /* 16 bits PC-rel. address. */
+#define R_PARISC_PCREL16WF 78 /* 16 bits PC-rel. address. */
+#define R_PARISC_PCREL16DF 79 /* 16 bits PC-rel. address. */
+#define R_PARISC_DIR64 80 /* 64 bits of eff. address. */
+#define R_PARISC_DIR14WR 83 /* 14 bits of eff. address. */
+#define R_PARISC_DIR14DR 84 /* 14 bits of eff. address. */
+#define R_PARISC_DIR16F 85 /* 16 bits of eff. address. */
+#define R_PARISC_DIR16WF 86 /* 16 bits of eff. address. */
+#define R_PARISC_DIR16DF 87 /* 16 bits of eff. address. */
+#define R_PARISC_GPREL64 88 /* 64 bits of GP-rel. address. */
+#define R_PARISC_GPREL14WR 91 /* GP-rel. address, right 14 bits. */
+#define R_PARISC_GPREL14DR 92 /* GP-rel. address, right 14 bits. */
+#define R_PARISC_GPREL16F 93 /* 16 bits GP-rel. address. */
+#define R_PARISC_GPREL16WF 94 /* 16 bits GP-rel. address. */
+#define R_PARISC_GPREL16DF 95 /* 16 bits GP-rel. address. */
+#define R_PARISC_LTOFF64 96 /* 64 bits LT-rel. address. */
+#define R_PARISC_LTOFF14WR 99 /* LT-rel. address, right 14 bits. */
+#define R_PARISC_LTOFF14DR 100 /* LT-rel. address, right 14 bits. */
+#define R_PARISC_LTOFF16F 101 /* 16 bits LT-rel. address. */
+#define R_PARISC_LTOFF16WF 102 /* 16 bits LT-rel. address. */
+#define R_PARISC_LTOFF16DF 103 /* 16 bits LT-rel. address. */
+#define R_PARISC_SECREL64 104 /* 64 bits section rel. address. */
+#define R_PARISC_SEGREL64 112 /* 64 bits segment rel. address. */
+#define R_PARISC_PLTOFF14WR 115 /* PLT-rel. address, right 14 bits. */
+#define R_PARISC_PLTOFF14DR 116 /* PLT-rel. address, right 14 bits. */
+#define R_PARISC_PLTOFF16F 117 /* 16 bits LT-rel. address. */
+#define R_PARISC_PLTOFF16WF 118 /* 16 bits PLT-rel. address. */
+#define R_PARISC_PLTOFF16DF 119 /* 16 bits PLT-rel. address. */
+#define R_PARISC_LTOFF_FPTR64 120 /* 64 bits LT-rel. function ptr. */
+#define R_PARISC_LTOFF_FPTR14WR 123 /* LT-rel. fct. ptr., right 14 bits. */
+#define R_PARISC_LTOFF_FPTR14DR 124 /* LT-rel. fct. ptr., right 14 bits. */
+#define R_PARISC_LTOFF_FPTR16F 125 /* 16 bits LT-rel. function ptr. */
+#define R_PARISC_LTOFF_FPTR16WF 126 /* 16 bits LT-rel. function ptr. */
+#define R_PARISC_LTOFF_FPTR16DF 127 /* 16 bits LT-rel. function ptr. */
+#define R_PARISC_LORESERVE 128
+#define R_PARISC_COPY 128 /* Copy relocation. */
+#define R_PARISC_IPLT 129 /* Dynamic reloc, imported PLT */
+#define R_PARISC_EPLT 130 /* Dynamic reloc, exported PLT */
+#define R_PARISC_TPREL32 153 /* 32 bits TP-rel. address. */
+#define R_PARISC_TPREL21L 154 /* TP-rel. address, left 21 bits. */
+#define R_PARISC_TPREL14R 158 /* TP-rel. address, right 14 bits. */
+#define R_PARISC_LTOFF_TP21L 162 /* LT-TP-rel. address, left 21 bits. */
+#define R_PARISC_LTOFF_TP14R 166 /* LT-TP-rel. address, right 14 bits.*/
+#define R_PARISC_LTOFF_TP14F 167 /* 14 bits LT-TP-rel. address. */
+#define R_PARISC_TPREL64 216 /* 64 bits TP-rel. address. */
+#define R_PARISC_TPREL14WR 219 /* TP-rel. address, right 14 bits. */
+#define R_PARISC_TPREL14DR 220 /* TP-rel. address, right 14 bits. */
+#define R_PARISC_TPREL16F 221 /* 16 bits TP-rel. address. */
+#define R_PARISC_TPREL16WF 222 /* 16 bits TP-rel. address. */
+#define R_PARISC_TPREL16DF 223 /* 16 bits TP-rel. address. */
+#define R_PARISC_LTOFF_TP64 224 /* 64 bits LT-TP-rel. address. */
+#define R_PARISC_LTOFF_TP14WR 227 /* LT-TP-rel. address, right 14 bits.*/
+#define R_PARISC_LTOFF_TP14DR 228 /* LT-TP-rel. address, right 14 bits.*/
+#define R_PARISC_LTOFF_TP16F 229 /* 16 bits LT-TP-rel. address. */
+#define R_PARISC_LTOFF_TP16WF 230 /* 16 bits LT-TP-rel. address. */
+#define R_PARISC_LTOFF_TP16DF 231 /* 16 bits LT-TP-rel. address. */
+#define R_PARISC_HIRESERVE 255
+
+/* Legal values for p_type field of Elf32_Phdr/Elf64_Phdr. */
+
+#define PT_HP_TLS (PT_LOOS + 0x0)
+#define PT_HP_CORE_NONE (PT_LOOS + 0x1)
+#define PT_HP_CORE_VERSION (PT_LOOS + 0x2)
+#define PT_HP_CORE_KERNEL (PT_LOOS + 0x3)
+#define PT_HP_CORE_COMM (PT_LOOS + 0x4)
+#define PT_HP_CORE_PROC (PT_LOOS + 0x5)
+#define PT_HP_CORE_LOADABLE (PT_LOOS + 0x6)
+#define PT_HP_CORE_STACK (PT_LOOS + 0x7)
+#define PT_HP_CORE_SHM (PT_LOOS + 0x8)
+#define PT_HP_CORE_MMF (PT_LOOS + 0x9)
+#define PT_HP_PARALLEL (PT_LOOS + 0x10)
+#define PT_HP_FASTBIND (PT_LOOS + 0x11)
+#define PT_HP_OPT_ANNOT (PT_LOOS + 0x12)
+#define PT_HP_HSL_ANNOT (PT_LOOS + 0x13)
+#define PT_HP_STACK (PT_LOOS + 0x14)
+
+#define PT_PARISC_ARCHEXT 0x70000000
+#define PT_PARISC_UNWIND 0x70000001
+
+/* Legal values for p_flags field of Elf32_Phdr/Elf64_Phdr. */
+
+#define PF_PARISC_SBP 0x08000000
+
+#define PF_HP_PAGE_SIZE 0x00100000
+#define PF_HP_FAR_SHARED 0x00200000
+#define PF_HP_NEAR_SHARED 0x00400000
+#define PF_HP_CODE 0x01000000
+#define PF_HP_MODIFY 0x02000000
+#define PF_HP_LAZYSWAP 0x04000000
+#define PF_HP_SBP 0x08000000
+
+
+/* Alpha specific definitions. */
+
+/* Legal values for e_flags field of Elf64_Ehdr. */
+
+#define EF_ALPHA_32BIT 1 /* All addresses must be < 2GB. */
+#define EF_ALPHA_CANRELAX 2 /* Relocations for relaxing exist. */
+
+/* Legal values for sh_type field of Elf64_Shdr. */
+
+/* These two are primerily concerned with ECOFF debugging info. */
+#define SHT_ALPHA_DEBUG 0x70000001
+#define SHT_ALPHA_REGINFO 0x70000002
+
+/* Legal values for sh_flags field of Elf64_Shdr. */
+
+#define SHF_ALPHA_GPREL 0x10000000
+
+/* Legal values for st_other field of Elf64_Sym. */
+#define STO_ALPHA_NOPV 0x80 /* No PV required. */
+#define STO_ALPHA_STD_GPLOAD 0x88 /* PV only used for initial ldgp. */
+
+/* Alpha relocs. */
+
+#define R_ALPHA_NONE 0 /* No reloc */
+#define R_ALPHA_REFLONG 1 /* Direct 32 bit */
+#define R_ALPHA_REFQUAD 2 /* Direct 64 bit */
+#define R_ALPHA_GPREL32 3 /* GP relative 32 bit */
+#define R_ALPHA_LITERAL 4 /* GP relative 16 bit w/optimization */
+#define R_ALPHA_LITUSE 5 /* Optimization hint for LITERAL */
+#define R_ALPHA_GPDISP 6 /* Add displacement to GP */
+#define R_ALPHA_BRADDR 7 /* PC+4 relative 23 bit shifted */
+#define R_ALPHA_HINT 8 /* PC+4 relative 16 bit shifted */
+#define R_ALPHA_SREL16 9 /* PC relative 16 bit */
+#define R_ALPHA_SREL32 10 /* PC relative 32 bit */
+#define R_ALPHA_SREL64 11 /* PC relative 64 bit */
+#define R_ALPHA_OP_PUSH 12 /* OP stack push */
+#define R_ALPHA_OP_STORE 13 /* OP stack pop and store */
+#define R_ALPHA_OP_PSUB 14 /* OP stack subtract */
+#define R_ALPHA_OP_PRSHIFT 15 /* OP stack right shift */
+#define R_ALPHA_GPVALUE 16
+#define R_ALPHA_GPRELHIGH 17
+#define R_ALPHA_GPRELLOW 18
+#define R_ALPHA_IMMED_GP_16 19
+#define R_ALPHA_IMMED_GP_HI32 20
+#define R_ALPHA_IMMED_SCN_HI32 21
+#define R_ALPHA_IMMED_BR_HI32 22
+#define R_ALPHA_IMMED_LO32 23
+#define R_ALPHA_COPY 24 /* Copy symbol at runtime */
+#define R_ALPHA_GLOB_DAT 25 /* Create GOT entry */
+#define R_ALPHA_JMP_SLOT 26 /* Create PLT entry */
+#define R_ALPHA_RELATIVE 27 /* Adjust by program base */
+/* Keep this the last entry. */
+#define R_ALPHA_NUM 28
+
+
+/* PowerPC specific declarations */
+
+/* Values for Elf32/64_Ehdr.e_flags. */
+#define EF_PPC_EMB 0x80000000 /* PowerPC embedded flag */
+
+/* Cygnus local bits below */
+#define EF_PPC_RELOCATABLE 0x00010000 /* PowerPC -mrelocatable flag*/
+#define EF_PPC_RELOCATABLE_LIB 0x00008000 /* PowerPC -mrelocatable-lib
+ flag */
+
+/* PowerPC relocations defined by the ABIs */
+#define R_PPC_NONE 0
+#define R_PPC_ADDR32 1 /* 32bit absolute address */
+#define R_PPC_ADDR24 2 /* 26bit address, 2 bits ignored. */
+#define R_PPC_ADDR16 3 /* 16bit absolute address */
+#define R_PPC_ADDR16_LO 4 /* lower 16bit of absolute address */
+#define R_PPC_ADDR16_HI 5 /* high 16bit of absolute address */
+#define R_PPC_ADDR16_HA 6 /* adjusted high 16bit */
+#define R_PPC_ADDR14 7 /* 16bit address, 2 bits ignored */
+#define R_PPC_ADDR14_BRTAKEN 8
+#define R_PPC_ADDR14_BRNTAKEN 9
+#define R_PPC_REL24 10 /* PC relative 26 bit */
+#define R_PPC_REL14 11 /* PC relative 16 bit */
+#define R_PPC_REL14_BRTAKEN 12
+#define R_PPC_REL14_BRNTAKEN 13
+#define R_PPC_GOT16 14
+#define R_PPC_GOT16_LO 15
+#define R_PPC_GOT16_HI 16
+#define R_PPC_GOT16_HA 17
+#define R_PPC_PLTREL24 18
+#define R_PPC_COPY 19
+#define R_PPC_GLOB_DAT 20
+#define R_PPC_JMP_SLOT 21
+#define R_PPC_RELATIVE 22
+#define R_PPC_LOCAL24PC 23
+#define R_PPC_UADDR32 24
+#define R_PPC_UADDR16 25
+#define R_PPC_REL32 26
+#define R_PPC_PLT32 27
+#define R_PPC_PLTREL32 28
+#define R_PPC_PLT16_LO 29
+#define R_PPC_PLT16_HI 30
+#define R_PPC_PLT16_HA 31
+#define R_PPC_SDAREL16 32
+#define R_PPC_SECTOFF 33
+#define R_PPC_SECTOFF_LO 34
+#define R_PPC_SECTOFF_HI 35
+#define R_PPC_SECTOFF_HA 36
+/* Keep this the last entry. */
+#define R_PPC_NUM 37
+
+/* The remaining relocs are from the Embedded ELF ABI, and are not
+ in the SVR4 ELF ABI. */
+#define R_PPC_EMB_NADDR32 101
+#define R_PPC_EMB_NADDR16 102
+#define R_PPC_EMB_NADDR16_LO 103
+#define R_PPC_EMB_NADDR16_HI 104
+#define R_PPC_EMB_NADDR16_HA 105
+#define R_PPC_EMB_SDAI16 106
+#define R_PPC_EMB_SDA2I16 107
+#define R_PPC_EMB_SDA2REL 108
+#define R_PPC_EMB_SDA21 109 /* 16 bit offset in SDA */
+#define R_PPC_EMB_MRKREF 110
+#define R_PPC_EMB_RELSEC16 111
+#define R_PPC_EMB_RELST_LO 112
+#define R_PPC_EMB_RELST_HI 113
+#define R_PPC_EMB_RELST_HA 114
+#define R_PPC_EMB_BIT_FLD 115
+#define R_PPC_EMB_RELSDA 116 /* 16 bit relative offset in SDA */
+
+/* Diab tool relocations. */
+#define R_PPC_DIAB_SDA21_LO 180 /* like EMB_SDA21, but lower 16 bit */
+#define R_PPC_DIAB_SDA21_HI 181 /* like EMB_SDA21, but high 16 bit */
+#define R_PPC_DIAB_SDA21_HA 182 /* like EMB_SDA21, adjusted high 16 */
+#define R_PPC_DIAB_RELSDA_LO 183 /* like EMB_RELSDA, but lower 16 bit */
+#define R_PPC_DIAB_RELSDA_HI 184 /* like EMB_RELSDA, but high 16 bit */
+#define R_PPC_DIAB_RELSDA_HA 185 /* like EMB_RELSDA, adjusted high 16 */
+
+/* This is a phony reloc to handle any old fashioned TOC16 references
+ that may still be in object files. */
+#define R_PPC_TOC16 255
+
+
+/* ARM specific declarations */
+
+/* Processor specific flags for the ELF header e_flags field. */
+#define EF_ARM_RELEXEC 0x01
+#define EF_ARM_HASENTRY 0x02
+#define EF_ARM_INTERWORK 0x04
+#define EF_ARM_APCS_26 0x08
+#define EF_ARM_APCS_FLOAT 0x10
+#define EF_ARM_PIC 0x20
+#define EF_ARM_ALIGN8 0x40 /* 8-bit structure alignment is in use */
+#define EF_ARM_NEW_ABI 0x80
+#define EF_ARM_OLD_ABI 0x100
+
+/* Other constants defined in the ARM ELF spec. version B-01. */
+/* NB. These conflict with values defined above. */
+#define EF_ARM_SYMSARESORTED 0x04
+#define EF_ARM_DYNSYMSUSESEGIDX 0x08
+#define EF_ARM_MAPSYMSFIRST 0x10
+#define EF_ARM_EABIMASK 0XFF000000
+
+#define EF_ARM_EABI_VERSION(flags) ((flags) & EF_ARM_EABIMASK)
+#define EF_ARM_EABI_UNKNOWN 0x00000000
+#define EF_ARM_EABI_VER1 0x01000000
+#define EF_ARM_EABI_VER2 0x02000000
+
+/* Additional symbol types for Thumb */
+#define STT_ARM_TFUNC 0xd
+
+/* ARM-specific values for sh_flags */
+#define SHF_ARM_ENTRYSECT 0x10000000 /* Section contains an entry point */
+#define SHF_ARM_COMDEF 0x80000000 /* Section may be multiply defined
+ in the input to a link step */
+
+/* ARM-specific program header flags */
+#define PF_ARM_SB 0x10000000 /* Segment contains the location
+ addressed by the static base */
+
+/* ARM relocs. */
+#define R_ARM_NONE 0 /* No reloc */
+#define R_ARM_PC24 1 /* PC relative 26 bit branch */
+#define R_ARM_ABS32 2 /* Direct 32 bit */
+#define R_ARM_REL32 3 /* PC relative 32 bit */
+#define R_ARM_PC13 4
+#define R_ARM_ABS16 5 /* Direct 16 bit */
+#define R_ARM_ABS12 6 /* Direct 12 bit */
+#define R_ARM_THM_ABS5 7
+#define R_ARM_ABS8 8 /* Direct 8 bit */
+#define R_ARM_SBREL32 9
+#define R_ARM_THM_PC22 10
+#define R_ARM_THM_PC8 11
+#define R_ARM_AMP_VCALL9 12
+#define R_ARM_SWI24 13
+#define R_ARM_THM_SWI8 14
+#define R_ARM_XPC25 15
+#define R_ARM_THM_XPC22 16
+#define R_ARM_COPY 20 /* Copy symbol at runtime */
+#define R_ARM_GLOB_DAT 21 /* Create GOT entry */
+#define R_ARM_JUMP_SLOT 22 /* Create PLT entry */
+#define R_ARM_RELATIVE 23 /* Adjust by program base */
+#define R_ARM_GOTOFF 24 /* 32 bit offset to GOT */
+#define R_ARM_GOTPC 25 /* 32 bit PC relative offset to GOT */
+#define R_ARM_GOT32 26 /* 32 bit GOT entry */
+#define R_ARM_PLT32 27 /* 32 bit PLT address */
+#define R_ARM_ALU_PCREL_7_0 32
+#define R_ARM_ALU_PCREL_15_8 33
+#define R_ARM_ALU_PCREL_23_15 34
+#define R_ARM_LDR_SBREL_11_0 35
+#define R_ARM_ALU_SBREL_19_12 36
+#define R_ARM_ALU_SBREL_27_20 37
+#define R_ARM_GNU_VTENTRY 100
+#define R_ARM_GNU_VTINHERIT 101
+#define R_ARM_THM_PC11 102 /* thumb unconditional branch */
+#define R_ARM_THM_PC9 103 /* thumb conditional branch */
+#define R_ARM_RXPC25 249
+#define R_ARM_RSBREL32 250
+#define R_ARM_THM_RPC22 251
+#define R_ARM_RREL32 252
+#define R_ARM_RABS22 253
+#define R_ARM_RPC24 254
+#define R_ARM_RBASE 255
+/* Keep this the last entry. */
+#define R_ARM_NUM 256
+
+/* IA-64 specific declarations. */
+
+/* Processor specific flags for the Ehdr e_flags field. */
+#define EF_IA_64_MASKOS 0x0000000f /* os-specific flags */
+#define EF_IA_64_ABI64 0x00000010 /* 64-bit ABI */
+#define EF_IA_64_ARCH 0xff000000 /* arch. version mask */
+
+/* Processor specific values for the Phdr p_type field. */
+#define PT_IA_64_ARCHEXT (PT_LOPROC + 0) /* arch extension bits */
+#define PT_IA_64_UNWIND (PT_LOPROC + 1) /* ia64 unwind bits */
+
+/* Processor specific flags for the Phdr p_flags field. */
+#define PF_IA_64_NORECOV 0x80000000 /* spec insns w/o recovery */
+
+/* Processor specific values for the Shdr sh_type field. */
+#define SHT_IA_64_EXT (SHT_LOPROC + 0) /* extension bits */
+#define SHT_IA_64_UNWIND (SHT_LOPROC + 1) /* unwind bits */
+
+/* Processor specific flags for the Shdr sh_flags field. */
+#define SHF_IA_64_SHORT 0x10000000 /* section near gp */
+#define SHF_IA_64_NORECOV 0x20000000 /* spec insns w/o recovery */
+
+/* Processor specific values for the Dyn d_tag field. */
+#define DT_IA_64_PLT_RESERVE (DT_LOPROC + 0)
+#define DT_IA_64_NUM 1
+
+/* IA-64 relocations. */
+#define R_IA64_NONE 0x00 /* none */
+#define R_IA64_IMM14 0x21 /* symbol + addend, add imm14 */
+#define R_IA64_IMM22 0x22 /* symbol + addend, add imm22 */
+#define R_IA64_IMM64 0x23 /* symbol + addend, mov imm64 */
+#define R_IA64_DIR32MSB 0x24 /* symbol + addend, data4 MSB */
+#define R_IA64_DIR32LSB 0x25 /* symbol + addend, data4 LSB */
+#define R_IA64_DIR64MSB 0x26 /* symbol + addend, data8 MSB */
+#define R_IA64_DIR64LSB 0x27 /* symbol + addend, data8 LSB */
+#define R_IA64_GPREL22 0x2a /* @gprel(sym + add), add imm22 */
+#define R_IA64_GPREL64I 0x2b /* @gprel(sym + add), mov imm64 */
+#define R_IA64_GPREL32MSB 0x2c /* @gprel(sym + add), data4 MSB */
+#define R_IA64_GPREL32LSB 0x2d /* @gprel(sym + add), data4 LSB */
+#define R_IA64_GPREL64MSB 0x2e /* @gprel(sym + add), data8 MSB */
+#define R_IA64_GPREL64LSB 0x2f /* @gprel(sym + add), data8 LSB */
+#define R_IA64_LTOFF22 0x32 /* @ltoff(sym + add), add imm22 */
+#define R_IA64_LTOFF64I 0x33 /* @ltoff(sym + add), mov imm64 */
+#define R_IA64_PLTOFF22 0x3a /* @pltoff(sym + add), add imm22 */
+#define R_IA64_PLTOFF64I 0x3b /* @pltoff(sym + add), mov imm64 */
+#define R_IA64_PLTOFF64MSB 0x3e /* @pltoff(sym + add), data8 MSB */
+#define R_IA64_PLTOFF64LSB 0x3f /* @pltoff(sym + add), data8 LSB */
+#define R_IA64_FPTR64I 0x43 /* @fptr(sym + add), mov imm64 */
+#define R_IA64_FPTR32MSB 0x44 /* @fptr(sym + add), data4 MSB */
+#define R_IA64_FPTR32LSB 0x45 /* @fptr(sym + add), data4 LSB */
+#define R_IA64_FPTR64MSB 0x46 /* @fptr(sym + add), data8 MSB */
+#define R_IA64_FPTR64LSB 0x47 /* @fptr(sym + add), data8 LSB */
+#define R_IA64_PCREL60B 0x48 /* @pcrel(sym + add), brl */
+#define R_IA64_PCREL21B 0x49 /* @pcrel(sym + add), ptb, call */
+#define R_IA64_PCREL21M 0x4a /* @pcrel(sym + add), chk.s */
+#define R_IA64_PCREL21F 0x4b /* @pcrel(sym + add), fchkf */
+#define R_IA64_PCREL32MSB 0x4c /* @pcrel(sym + add), data4 MSB */
+#define R_IA64_PCREL32LSB 0x4d /* @pcrel(sym + add), data4 LSB */
+#define R_IA64_PCREL64MSB 0x4e /* @pcrel(sym + add), data8 MSB */
+#define R_IA64_PCREL64LSB 0x4f /* @pcrel(sym + add), data8 LSB */
+#define R_IA64_LTOFF_FPTR22 0x52 /* @ltoff(@fptr(s+a)), imm22 */
+#define R_IA64_LTOFF_FPTR64I 0x53 /* @ltoff(@fptr(s+a)), imm64 */
+#define R_IA64_LTOFF_FPTR32MSB 0x54 /* @ltoff(@fptr(s+a)), data4 MSB */
+#define R_IA64_LTOFF_FPTR32LSB 0x55 /* @ltoff(@fptr(s+a)), data4 LSB */
+#define R_IA64_LTOFF_FPTR64MSB 0x56 /* @ltoff(@fptr(s+a)), data8 MSB */
+#define R_IA64_LTOFF_FPTR64LSB 0x57 /* @ltoff(@fptr(s+a)), data8 LSB */
+#define R_IA64_SEGREL32MSB 0x5c /* @segrel(sym + add), data4 MSB */
+#define R_IA64_SEGREL32LSB 0x5d /* @segrel(sym + add), data4 LSB */
+#define R_IA64_SEGREL64MSB 0x5e /* @segrel(sym + add), data8 MSB */
+#define R_IA64_SEGREL64LSB 0x5f /* @segrel(sym + add), data8 LSB */
+#define R_IA64_SECREL32MSB 0x64 /* @secrel(sym + add), data4 MSB */
+#define R_IA64_SECREL32LSB 0x65 /* @secrel(sym + add), data4 LSB */
+#define R_IA64_SECREL64MSB 0x66 /* @secrel(sym + add), data8 MSB */
+#define R_IA64_SECREL64LSB 0x67 /* @secrel(sym + add), data8 LSB */
+#define R_IA64_REL32MSB 0x6c /* data 4 + REL */
+#define R_IA64_REL32LSB 0x6d /* data 4 + REL */
+#define R_IA64_REL64MSB 0x6e /* data 8 + REL */
+#define R_IA64_REL64LSB 0x6f /* data 8 + REL */
+#define R_IA64_LTV32MSB 0x74 /* symbol + addend, data4 MSB */
+#define R_IA64_LTV32LSB 0x75 /* symbol + addend, data4 LSB */
+#define R_IA64_LTV64MSB 0x76 /* symbol + addend, data8 MSB */
+#define R_IA64_LTV64LSB 0x77 /* symbol + addend, data8 LSB */
+#define R_IA64_PCREL21BI 0x79 /* @pcrel(sym + add), 21bit inst */
+#define R_IA64_PCREL22 0x7a /* @pcrel(sym + add), 22bit inst */
+#define R_IA64_PCREL64I 0x7b /* @pcrel(sym + add), 64bit inst */
+#define R_IA64_IPLTMSB 0x80 /* dynamic reloc, imported PLT, MSB */
+#define R_IA64_IPLTLSB 0x81 /* dynamic reloc, imported PLT, LSB */
+#define R_IA64_COPY 0x84 /* copy relocation */
+#define R_IA64_SUB 0x85 /* Addend and symbol difference */
+#define R_IA64_LTOFF22X 0x86 /* LTOFF22, relaxable. */
+#define R_IA64_LDXMOV 0x87 /* Use of LTOFF22X. */
+#define R_IA64_TPREL14 0x91 /* @tprel(sym + add), imm14 */
+#define R_IA64_TPREL22 0x92 /* @tprel(sym + add), imm22 */
+#define R_IA64_TPREL64I 0x93 /* @tprel(sym + add), imm64 */
+#define R_IA64_TPREL64MSB 0x96 /* @tprel(sym + add), data8 MSB */
+#define R_IA64_TPREL64LSB 0x97 /* @tprel(sym + add), data8 LSB */
+#define R_IA64_LTOFF_TPREL22 0x9a /* @ltoff(@tprel(s+a)), imm2 */
+#define R_IA64_DTPMOD64MSB 0xa6 /* @dtpmod(sym + add), data8 MSB */
+#define R_IA64_DTPMOD64LSB 0xa7 /* @dtpmod(sym + add), data8 LSB */
+#define R_IA64_LTOFF_DTPMOD22 0xaa /* @ltoff(@dtpmod(sym + add)), imm22 */
+#define R_IA64_DTPREL14 0xb1 /* @dtprel(sym + add), imm14 */
+#define R_IA64_DTPREL22 0xb2 /* @dtprel(sym + add), imm22 */
+#define R_IA64_DTPREL64I 0xb3 /* @dtprel(sym + add), imm64 */
+#define R_IA64_DTPREL32MSB 0xb4 /* @dtprel(sym + add), data4 MSB */
+#define R_IA64_DTPREL32LSB 0xb5 /* @dtprel(sym + add), data4 LSB */
+#define R_IA64_DTPREL64MSB 0xb6 /* @dtprel(sym + add), data8 MSB */
+#define R_IA64_DTPREL64LSB 0xb7 /* @dtprel(sym + add), data8 LSB */
+#define R_IA64_LTOFF_DTPREL22 0xba /* @ltoff(@dtprel(s+a)), imm22 */
+
+/* SH specific declarations */
+
+/* SH relocs. */
+#define R_SH_NONE 0
+#define R_SH_DIR32 1
+#define R_SH_REL32 2
+#define R_SH_DIR8WPN 3
+#define R_SH_IND12W 4
+#define R_SH_DIR8WPL 5
+#define R_SH_DIR8WPZ 6
+#define R_SH_DIR8BP 7
+#define R_SH_DIR8W 8
+#define R_SH_DIR8L 9
+#define R_SH_SWITCH16 25
+#define R_SH_SWITCH32 26
+#define R_SH_USES 27
+#define R_SH_COUNT 28
+#define R_SH_ALIGN 29
+#define R_SH_CODE 30
+#define R_SH_DATA 31
+#define R_SH_LABEL 32
+#define R_SH_SWITCH8 33
+#define R_SH_GNU_VTINHERIT 34
+#define R_SH_GNU_VTENTRY 35
+#define R_SH_GOT32 160
+#define R_SH_PLT32 161
+#define R_SH_COPY 162
+#define R_SH_GLOB_DAT 163
+#define R_SH_JMP_SLOT 164
+#define R_SH_RELATIVE 165
+#define R_SH_GOTOFF 166
+#define R_SH_GOTPC 167
+/* Keep this the last entry. */
+#define R_SH_NUM 256
+
+/* Additional s390 relocs */
+
+#define R_390_NONE 0 /* No reloc. */
+#define R_390_8 1 /* Direct 8 bit. */
+#define R_390_12 2 /* Direct 12 bit. */
+#define R_390_16 3 /* Direct 16 bit. */
+#define R_390_32 4 /* Direct 32 bit. */
+#define R_390_PC32 5 /* PC relative 32 bit. */
+#define R_390_GOT12 6 /* 12 bit GOT offset. */
+#define R_390_GOT32 7 /* 32 bit GOT offset. */
+#define R_390_PLT32 8 /* 32 bit PC relative PLT address. */
+#define R_390_COPY 9 /* Copy symbol at runtime. */
+#define R_390_GLOB_DAT 10 /* Create GOT entry. */
+#define R_390_JMP_SLOT 11 /* Create PLT entry. */
+#define R_390_RELATIVE 12 /* Adjust by program base. */
+#define R_390_GOTOFF 13 /* 32 bit offset to GOT. */
+#define R_390_GOTPC 14 /* 32 bit PC relative offset to GOT. */
+#define R_390_GOT16 15 /* 16 bit GOT offset. */
+#define R_390_PC16 16 /* PC relative 16 bit. */
+#define R_390_PC16DBL 17 /* PC relative 16 bit shifted by 1. */
+#define R_390_PLT16DBL 18 /* 16 bit PC rel. PLT shifted by 1. */
+#define R_390_PC32DBL 19 /* PC relative 32 bit shifted by 1. */
+#define R_390_PLT32DBL 20 /* 32 bit PC rel. PLT shifted by 1. */
+#define R_390_GOTPCDBL 21 /* 32 bit PC rel. GOT shifted by 1. */
+#define R_390_64 22 /* Direct 64 bit. */
+#define R_390_PC64 23 /* PC relative 64 bit. */
+#define R_390_GOT64 24 /* 64 bit GOT offset. */
+#define R_390_PLT64 25 /* 64 bit PC relative PLT address. */
+#define R_390_GOTENT 26 /* 32 bit PC rel. to GOT entry >> 1. */
+
+/* Keep this the last entry. */
+#define R_390_NUM 19
+
+/* CRIS relocations. */
+#define R_CRIS_NONE 0
+#define R_CRIS_8 1
+#define R_CRIS_16 2
+#define R_CRIS_32 3
+#define R_CRIS_8_PCREL 4
+#define R_CRIS_16_PCREL 5
+#define R_CRIS_32_PCREL 6
+#define R_CRIS_GNU_VTINHERIT 7
+#define R_CRIS_GNU_VTENTRY 8
+#define R_CRIS_COPY 9
+#define R_CRIS_GLOB_DAT 10
+#define R_CRIS_JUMP_SLOT 11
+#define R_CRIS_RELATIVE 12
+#define R_CRIS_16_GOT 13
+#define R_CRIS_32_GOT 14
+#define R_CRIS_16_GOTPLT 15
+#define R_CRIS_32_GOTPLT 16
+#define R_CRIS_32_GOTREL 17
+#define R_CRIS_32_PLT_GOTREL 18
+#define R_CRIS_32_PLT_PCREL 19
+
+#define R_CRIS_NUM 20
+
+#define R_MICROBLAZE_NONE 0
+#define R_MICROBLAZE_32 1
+#define R_MICROBLAZE_32_PCREL 2
+#define R_MICROBLAZE_64_PCREL 3
+#define R_MICROBLAZE_32_PCREL_LO 4
+#define R_MICROBLAZE_64 5
+#define R_MICROBLAZE_32_LO 6
+#define R_MICROBLAZE_SRO32 7
+#define R_MICROBLAZE_SRW32 8
+#define R_MICROBLAZE_64_NONE 9
+#define R_MICROBLAZE_32_SYM_OP_SYM 10
+#define R_MICROBLAZE_GNU_VTINHERIT 11
+#define R_MICROBLAZE_GNU_VTENTRY 12
+
+#define R_MICROBLAZE_NUM 13
+
+/* Altera NIOS specific definitions. */
+
+#define FLAT_NIOS2_R_32 0 /* Normal 32-bit reloc */
+#define FLAT_NIOS2_R_HI_LO 1
+#define FLAT_NIOS2_R_HIADJ_LO 2
+#define FLAT_NIOS2_R_CALL26 4
+
+/* NIOS relocations. */
+#define R_NIOS_NONE 0
+#define R_NIOS_32 1 /* A 32 bit absolute relocation.*/
+#define R_NIOS_LO16_LO5 2 /* A LO-16 5 bit absolute relocation. */
+#define R_NIOS_LO16_HI11 3 /* A LO-16 top 11 bit absolute relocation. */
+#define R_NIOS_HI16_LO5 4 /* A HI-16 5 bit absolute relocation. */
+#define R_NIOS_HI16_HI11 5 /* A HI-16 top 11 bit absolute relocation. */
+#define R_NIOS_PCREL6 6 /* A 6 bit relative relocation. */
+#define R_NIOS_PCREL8 7 /* An 8 bit relative relocation. */
+#define R_NIOS_PCREL11 8 /* An 11 bit relative relocation. */
+#define R_NIOS_16 9 /* A 16 bit absolute relocation. */
+#define R_NIOS_H_LO5 10 /* Low 5-bits of absolute relocation in halfwords. */
+#define R_NIOS_H_HI11 11 /* Top 11 bits of 16-bit absolute relocation in halfwords. */
+#define R_NIOS_H_XLO5 12 /* Low 5 bits of top 16-bits of 32-bit absolute relocation in halfwords. */
+#define R_NIOS_H_XHI11 13 /* Top 11 bits of top 16-bits of 32-bit absolute relocation in halfwords. */
+#define R_NIOS_H_16 14 /* Half-word @h value */
+#define R_NIOS_H_32 15 /* Word @h value */
+#define R_NIOS_GNU_VTINHERIT 200 /* GNU extension to record C++ vtable hierarchy */
+#define R_NIOS_GNU_VTENTRY 201 /* GNU extension to record C++ vtable member usage */
+/* Keep this the last entry. */
+#define R_NIOS_NUM 202
+
+/* NIOS II relocations */
+#define R_NIOS2_NONE 0
+#define R_NIOS2_S16 1
+#define R_NIOS2_U16 2
+#define R_NIOS2_PCREL16 3
+#define R_NIOS2_CALL26 4
+#define R_NIOS2_IMM5 5
+#define R_NIOS2_CACHE_OPX 6
+#define R_NIOS2_IMM6 7
+#define R_NIOS2_IMM8 8
+#define R_NIOS2_HI16 9
+#define R_NIOS2_LO16 10
+#define R_NIOS2_HIADJ16 11
+#define R_NIOS2_BFD_RELOC_32 12
+#define R_NIOS2_BFD_RELOC_16 13
+#define R_NIOS2_BFD_RELOC_8 14
+#define R_NIOS2_GPREL 15
+#define R_NIOS2_GNU_VTINHERIT 16
+#define R_NIOS2_GNU_VTENTRY 17
+#define R_NIOS2_UJMP 18
+#define R_NIOS2_CJMP 19
+#define R_NIOS2_CALLR 20
+#define R_NIOS2_ALIGN 21
+/* Keep this the last entry. */
+#define R_NIOS2_NUM 22
+
+#endif /* elf.h */
--- /dev/null
+
+ENTRY (__start)
+
+MEMORY {
+ flatmem : ORIGIN = 0x0, LENGTH = 0xfffffff
+}
+
+SECTIONS {
+ .G6 (DEFINED(G6Base) ? G6Base : 0x0) : {
+ *(.G6)
+ }
+ .G7 (DEFINED(G7Base) ? G7Base : 0x0) : {
+ *(.G7)
+ }
+ .G8 (DEFINED(G8Base) ? G8Base : 0x0) : {
+ *(.G8)
+ }
+ .G9 (DEFINED(G9Base) ? G9Base : 0) : {
+ *(.G9)
+ }
+ .G10 (DEFINED(G10Base) ? G10Base : 0) : {
+ *(.G10)
+ }
+ .G11 (DEFINED(G11Base) ? G11Base : 0) : {
+ *(.G11)
+ }
+ .G12 (DEFINED(G12Base) ? G12Base : 0) : {
+ *(.G12)
+ }
+ .G13 (DEFINED(G13Base) ? G13Base : 0) : {
+ *(.G13)
+ }
+ .text 0x0 : {
+ . = . + 4;
+ . = ALIGN(0x4) ;
+ _stext = . ;
+ *(.text)
+ *(.text.*)
+ *(.gnu.warning)
+ *(.stub)
+ *(.gnu.linkonce.t*)
+ *(.glue_7t)
+ *(.glue_7)
+ *(.jcr)
+ *(.init)
+ *(.fini)
+
+W_RODAT *(.rodata)
+W_RODAT *(.rodata1)
+W_RODAT *(.rodata.*)
+
+ /* This is special code area at the end of the normal
+ text section. It contains a small lookup table at
+ the start followed by the code pointed to by entries
+ in the lookup table. */
+ . = ALIGN (4) ;
+ PROVIDE(__ctbp = .);
+ *(.call_table_data)
+ *(.call_table_text)
+
+ . = ALIGN(0x20) ;
+ _etext = . ;
+ } > flatmem
+ .data : {
+ . = ALIGN(0x4) ;
+ _sdata = . ;
+ __data_start = . ;
+ data_start = . ;
+ *(.got.plt)
+ *(.got)
+ FILL(0) ;
+ . = ALIGN(0x20) ;
+ LONG(-1)
+ . = ALIGN(0x20) ;
+R_RODAT *(.rodata)
+R_RODAT *(.rodata1)
+R_RODAT *(.rodata.*)
+ *(.gnu.linkonce.r*)
+ *(.data)
+ *(.data1)
+ *(.data.*)
+ *(.gnu.linkonce.d*)
+ *(.data1)
+ *(.eh_frame)
+ *(.gcc_except_table)
+
+ /* Microblaze has .sdata and .sbss (small bss). They must
+ be contiguous, so please don't move any of this. JW */
+ _ssrw = . ;
+ *(.sdata)
+ *(.sdata.*)
+ *(.sbss) /* Don't move this! */
+ _essrw = . ;
+
+ _ssrw_size = _essrw - _ssrw;
+ PROVIDE(_SDA_BASE_ = _ssrw + (_ssrw_size / 2));
+
+ *(.gnu.linkonce.s.*)
+ *(__libc_atexit)
+ *(__libc_subinit)
+ *(__libc_subfreeres)
+ *(.note.ABI-tag)
+
+ /* microblaze-specific read-only small data area
+ and associated locating symbols */
+ _ssro = . ;
+ *(.sdata2)
+ _essro = . ;
+ _ssro_size = _essro - _ssro;
+ PROVIDE(_SDA2_BASE_ = _ssro + (_ssro_size / 2));
+
+ . = ALIGN(4) ;
+ __CTOR_LIST__ = .;
+ LONG((__CTOR_END__ - __CTOR_LIST__) / 4 - 2)
+ *(.ctors)
+ LONG(0)
+ __CTOR_END__ = .;
+ __DTOR_LIST__ = .;
+ LONG((__DTOR_END__ - __DTOR_LIST__) / 4 - 2)
+ *(.dtors)
+ LONG(0)
+ __DTOR_END__ = .;
+
+ . = ALIGN(0x10) ;
+ _edata = . ;
+ } > flatmem
+ .bss : {
+ . = ALIGN(0x4) ;
+ _sbss = ALIGN(0x4) ;
+ __bss_start = . ;
+ *(.dynsbss)
+ *(.sbss)
+ *(.sbss.*)
+ *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(.bss.*)
+ *(.bss*)
+ *(.gnu.linkonce.b*)
+ *(COMMON)
+ . = ALIGN(0x10) ;
+ _ebss = . ;
+ _end = . ;
+ end = . ;
+ } > flatmem
+
+ .junk 0 : { *(.rel*) *(.rela*) }
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+}
--- /dev/null
+/*
+ * elf2flt.c: Convert ELF (or any BFD format) to FLAT binary format
+ *
+ * (c) 1999-2002, Greg Ungerer <gerg@snapgear.com>
+ * Created elf2flt from coff2flt (see copyrights below). Added all the
+ * ELF format file handling. Extended relocation support for all of
+ * text and data.
+ *
+ * (c) 2006 Support the -a (use_resolved) option for TARGET_arm.
+ * Shaun Jackman <sjackman@gmail.com>
+ * (c) 2004, Nios II support, Wentao Xu <wentao@microtronix.com>
+ * (c) 2003, H8 support, ktrace <davidm@snapgear.com>
+ * (c) 2003-2004, MicroBlaze support, John Williams <jwilliams@itee.uq.edu.au>
+ * (c) 2001-2003, arm/arm-pic/arm-big-endian support <davidm@snapgear.com>
+ * (c) 2001, v850 changes, Mile Bader <miles@lsi.nec.co.jp>
+ * (c) 2003, SuperH support, Paul Mundt <lethal@linux-sh.org>
+ * (c) 2001, zflat support <davidm@snapgear.com>
+ * (c) 2001, Changes for GOT entries Paul Dale <pauli@snapgear.com> and
+ * David McCullough <davidm@snapgear.com>
+ *
+ * Now supports PIC with GOT tables. This works by taking a '.elf' file
+ * and a fully linked elf executable (at address 0) and produces a flat
+ * file that can be loaded with some fixups. It still supports the old
+ * style fully relocatable elf format files.
+ *
+ * Originally obj-res.c
+ *
+ * (c) 1998, Kenneth Albanowski <kjahds@kjahds.com>
+ * (c) 1998, D. Jeff Dionne
+ * (c) 1998, The Silver Hammer Group Ltd.
+ * (c) 1996, 1997 Dionne & Associates <jeff@ryeham.ee.ryerson.ca>
+ *
+ * This is Free Software, under the GNU Public Licence v2 or greater.
+ *
+ * Relocation added March 1997, Kresten Krab Thorup
+ * krab@california.daimi.aau.dk
+ */
+
+#include <stdio.h> /* Userland pieces of the ANSI C standard I/O package */
+#include <stdlib.h> /* Userland prototypes of the ANSI C std lib functions */
+#include <stdarg.h> /* Allows va_list to exist in the these namespaces */
+#include <string.h> /* Userland prototypes of the string handling funcs */
+#include <strings.h>
+#include <unistd.h> /* Userland prototypes of the Unix std system calls */
+#include <fcntl.h> /* Flag value for file handling functions */
+#include <time.h>
+#ifndef WIN32
+#include <netinet/in.h> /* Consts and structs defined by the internet system */
+#define BINARY_FILE_OPTS
+#else
+#include <winsock2.h>
+#define BINARY_FILE_OPTS "b"
+#endif
+
+/* from $(INSTALLDIR)/include */
+#include <bfd.h> /* Main header file for the BFD library */
+
+#if defined(TARGET_h8300)
+#include <elf/h8.h> /* TARGET_* ELF support for the BFD library */
+#elif defined(__CYGWIN__) || defined(__MINGW32__) || defined(TARGET_nios) || defined(TARGET_nios2)
+#include "cygwin-elf.h" /* Cygwin uses a local copy */
+#elif defined(TARGET_microblaze)
+#include <elf/microblaze.h> /* TARGET_* ELF support for the BFD library */
+#elif defined(TARGET_bfin)
+#include "elf/bfin.h"
+#else
+#include <elf.h> /* TARGET_* ELF support for the BFD library */
+#endif
+
+#if defined(__MINGW32__)
+#include <getopt.h>
+#endif
+
+/* from uClinux-x.x.x/include/linux */
+#include "flat.h" /* Binary flat header description */
+
+#ifdef TARGET_e1
+#include <e1.h>
+#endif
+
+#ifdef TARGET_v850e
+#define TARGET_v850
+#endif
+
+#if defined(TARGET_m68k)
+#define ARCH "m68k/coldfire"
+#elif defined(TARGET_arm)
+#define ARCH "arm"
+#elif defined(TARGET_sparc)
+#define ARCH "sparc"
+#elif defined(TARGET_v850)
+#define ARCH "v850"
+#elif defined(TARGET_sh)
+#define ARCH "sh"
+#elif defined(TARGET_h8300)
+#define ARCH "h8300"
+#elif defined(TARGET_microblaze)
+#define ARCH "microblaze"
+#elif defined(TARGET_e1)
+#define ARCH "e1-coff"
+#elif defined(TARGET_bfin)
+#define ARCH "bfin"
+#define FLAT_RELOC_TYPE_TEXT 0
+#define FLAT_RELOC_TYPE_DATA 1
+#define FLAT_RELOC_TYPE_BSS 2
+#define FLAT_RELOC_TYPE_STACK 3
+#define FLAT_RELOC_PART_LO 0
+#define FLAT_RELOC_PART_HI 1
+#define PCREL24_MAGIC_OFFSET -1
+#elif defined(TARGET_nios)
+#define ARCH "nios"
+#elif defined(TARGET_nios2)
+#define ARCH "nios2"
+#else
+#error "Don't know how to support your CPU architecture??"
+#endif
+
+#if defined(TARGET_m68k) || defined(TARGET_h8300) || defined(TARGET_bfin)
+/*
+ * Define a maximum number of bytes allowed in the offset table.
+ * We'll fail if the table is larger than this.
+ *
+ * This limit may be different for platforms other than m68k, but
+ * 8000 entries is a lot, trust me :-) (davidm)
+ */
+#define GOT_LIMIT 32767
+/*
+ * we have to mask out the shared library id here and there, this gives
+ * us the real address bits when needed
+ */
+#define real_address_bits(x) (pic_with_got ? ((x) & 0xffffff) : (x))
+#else
+#define real_address_bits(x) (x)
+#endif
+
+#ifndef O_BINARY
+#define O_BINARY 0
+#endif
+
+
+int verbose = 0; /* extra output when running */
+int pic_with_got = 0; /* do elf/got processing with PIC code */
+int load_to_ram = 0; /* instruct loader to allocate everything into RAM */
+int ktrace = 0; /* instruct loader output kernel trace on load */
+int compress = 0; /* 1 = compress everything, 2 = compress data only */
+int use_resolved = 0; /* If true, get the value of symbol references from */
+ /* the program contents, not from the relocation table. */
+ /* In this case, the input ELF file must be already */
+ /* fully resolved (using the `-q' flag with recent */
+ /* versions of GNU ld will give you a fully resolved */
+ /* output file with relocation entries). */
+
+const char *progname, *filename;
+int lineno;
+
+int nerrors = 0;
+int nwarnings = 0;
+
+static char where[200];
+
+enum {
+ /* Use exactly one of these: */
+ E_NOFILE = 0, /* "progname: " */
+ E_FILE = 1, /* "filename: " */
+ E_FILELINE = 2, /* "filename:lineno: " */
+ E_FILEWHERE = 3, /* "filename:%s: " -- set %s with ewhere() */
+
+ /* Add in any of these with |': */
+ E_WARNING = 0x10,
+ E_PERROR = 0x20
+};
+
+void ewhere (const char *format, ...);
+void einfo (int type, const char *format, ...);
+
+
+void
+ewhere (const char *format, ...) {
+ va_list args;
+ va_start (args, format);
+ vsprintf (where, format, args);
+ va_end (args);
+}
+
+
+void
+einfo (int type, const char *format, ...) {
+ va_list args;
+
+ switch (type & 0x0f) {
+ case E_NOFILE:
+ fprintf (stderr, "%s: ", progname);
+ break;
+ case E_FILE:
+ fprintf (stderr, "%s: ", filename);
+ break;
+ case E_FILELINE:
+ ewhere ("%d", lineno);
+ /* fall-through */
+ case E_FILEWHERE:
+ fprintf (stderr, "%s:%s: ", filename, where);
+ break;
+ }
+
+ if (type & E_WARNING) {
+ fprintf (stderr, "warning: ");
+ nwarnings++;
+ } else {
+ nerrors++;
+ }
+
+ va_start (args, format);
+ vfprintf (stderr, format, args);
+ va_end (args);
+
+ if (type & E_PERROR)
+ perror ("");
+ else
+ fprintf (stderr, "\n");
+}
+
+
+asymbol**
+get_symbols (bfd *abfd, long *num)
+{
+ long storage_needed;
+ asymbol **symbol_table;
+ long number_of_symbols;
+
+ storage_needed = bfd_get_symtab_upper_bound (abfd);
+
+ if (storage_needed < 0)
+ abort ();
+
+ if (storage_needed == 0)
+ return NULL;
+
+ symbol_table = (asymbol **) malloc (storage_needed);
+
+ number_of_symbols = bfd_canonicalize_symtab (abfd, symbol_table);
+
+ if (number_of_symbols < 0)
+ abort ();
+
+ *num = number_of_symbols;
+ return symbol_table;
+}
+
+
+
+int
+dump_symbols(asymbol **symbol_table, long number_of_symbols)
+{
+ long i;
+ printf("SYMBOL TABLE:\n");
+ for (i=0; i<number_of_symbols; i++) {
+ printf(" NAME=%s VALUE=0x%x\n", symbol_table[i]->name,
+ symbol_table[i]->value);
+ }
+ printf("\n");
+ return(0);
+}
+
+
+
+long
+get_symbol_offset(char *name, asection *sec, asymbol **symbol_table, long number_of_symbols)
+{
+ long i;
+ for (i=0; i<number_of_symbols; i++) {
+ if (symbol_table[i]->section == sec) {
+ if (!strcmp(symbol_table[i]->name, name)) {
+ return symbol_table[i]->value;
+ }
+ }
+ }
+ return -1;
+}
+
+
+
+long
+get_gp_value(asymbol **symbol_table, long number_of_symbols)
+{
+ long i;
+ for (i=0; i<number_of_symbols; i++) {
+ if (!strcmp(symbol_table[i]->name, "_gp"))
+ return symbol_table[i]->value;
+ }
+ return -1;
+}
+
+
+
+long
+add_com_to_bss(asymbol **symbol_table, long number_of_symbols, long bss_len)
+{
+ long i, comsize;
+ long offset;
+
+ comsize = 0;
+ for (i=0; i<number_of_symbols; i++) {
+ if (strcmp("*COM*", symbol_table[i]->section->name) == 0) {
+ offset = bss_len + comsize;
+ comsize += symbol_table[i]->value;
+ symbol_table[i]->value = offset;
+ }
+ }
+ return comsize;
+}
+
+#ifdef TARGET_bfin
+/* FUNCTION : weak_und_symbol
+ ABSTRACT : return true if symbol is weak and undefined.
+*/
+static int
+weak_und_symbol(const char *reloc_section_name,
+ struct bfd_symbol *symbol)
+{
+ if (!(strstr (reloc_section_name, "text")
+ || strstr (reloc_section_name, "data")
+ || strstr (reloc_section_name, "bss"))) {
+ if (symbol->flags & BSF_WEAK) {
+#ifdef DEBUG_BFIN
+ fprintf(stderr, "found weak undefined symbol %s\n", symbol->name);
+#endif
+ return TRUE;
+ }
+ }
+ return FALSE;
+}
+
+static int
+bfin_set_reloc (uint32_t *reloc,
+ const char *reloc_section_name,
+ const char *sym_name,
+ struct bfd_symbol *symbol,
+ int sp, int hilo, int32_t offset)
+{
+ unsigned int type;
+ uint32_t val;
+
+ if (strstr (reloc_section_name, "text"))
+ type = FLAT_RELOC_TYPE_TEXT;
+ else if (strstr (reloc_section_name, "data"))
+ type = FLAT_RELOC_TYPE_DATA;
+ else if (strstr (reloc_section_name, "bss"))
+ type = FLAT_RELOC_TYPE_BSS;
+ else if (strstr (reloc_section_name, "stack"))
+ type = FLAT_RELOC_TYPE_STACK;
+ else if (symbol->flags & BSF_WEAK){
+ /* weak symbol support ... if a weak symbol is undefined at the
+ end of a final link, it should return 0 rather than error
+ We will assume text section for the moment.
+ */
+ type = FLAT_RELOC_TYPE_TEXT;
+ } else if (strstr (reloc_section_name, "*ABS*")){
+ /* (A data section initialization of something in the shared libc's text section
+ does not resolve - i.e. a global pointer to function initialized with
+ a libc function).
+ The text section here is appropriate as the section information
+ of the shared library is lost. The loader will do some calcs.
+ */
+ type = FLAT_RELOC_TYPE_TEXT;
+ } else {
+ printf ("Unknown Type - relocation for %s in bad section - %s\n", sym_name, reloc_section_name);
+ return 1;
+ }
+
+ val = (offset & ((1 << 26) - 1)) << 6;
+ val |= (sp & (1 << 3) - 1) << 3;
+ val |= (hilo & 1) << 2;
+ val |= (type & (1 << 2) - 1);
+ *reloc = val;
+ return 0;
+}
+#endif
+
+
+uint32_t *
+output_relocs (
+ bfd *abs_bfd,
+ asymbol **symbols,
+ int number_of_symbols,
+ unsigned long *n_relocs,
+ unsigned char *text, int text_len, unsigned long text_vma,
+ unsigned char *data, int data_len, unsigned long data_vma,
+ bfd *rel_bfd)
+{
+ uint32_t *flat_relocs;
+ asection *a, *sym_section, *r;
+ arelent **relpp, **p, *q;
+ const char *sym_name, *section_name;
+ unsigned char *sectionp;
+ unsigned long pflags;
+ char addstr[16];
+ long sym_addr, sym_vma, section_vma;
+ int relsize, relcount;
+ int flat_reloc_count;
+ int sym_reloc_size, rc;
+ int got_size = 0;
+ int bad_relocs = 0;
+ asymbol **symb;
+ long nsymb;
+
+#if 0
+ printf("%s(%d): output_relocs(abs_bfd=%d,synbols=0x%x,number_of_symbols=%d"
+ "n_relocs=0x%x,text=0x%x,text_len=%d,data=0x%x,data_len=%d)\n",
+ __FILE__, __LINE__, abs_bfd, symbols, number_of_symbols, n_relocs,
+ text, text_len, data, data_len);
+#endif
+
+#if 0
+dump_symbols(symbols, number_of_symbols);
+#endif
+
+ *n_relocs = 0;
+ flat_relocs = NULL;
+ flat_reloc_count = 0;
+ rc = 0;
+ pflags = 0;
+
+ /* Determine how big our offset table is in bytes.
+ * This isn't too difficult as we've terminated the table with -1.
+ * Also note that both the relocatable and absolute versions have this
+ * terminator even though the relocatable one doesn't have the GOT!
+ */
+ if (pic_with_got && !use_resolved) {
+ unsigned long *lp = (unsigned long *)data;
+ /* Should call ntohl(*lp) here but is isn't going to matter */
+ while (*lp != 0xffffffff) lp++;
+ got_size = ((unsigned char *)lp) - data;
+ if (verbose)
+ printf("GOT table contains %d entries (%d bytes)\n",
+ got_size/sizeof(unsigned long), got_size);
+#ifdef TARGET_m68k
+ if (got_size > GOT_LIMIT) {
+ fprintf(stderr, "GOT too large: %d bytes (limit = %d bytes)\n",
+ got_size, GOT_LIMIT);
+ exit(1);
+ }
+#endif
+ }
+
+ for (a = abs_bfd->sections; (a != (asection *) NULL); a = a->next) {
+ section_vma = bfd_section_vma(abs_bfd, a);
+
+ if (verbose)
+ printf("SECTION: %s [0x%x]: flags=0x%x vma=0x%x\n", a->name, a,
+ a->flags, section_vma);
+
+// if (bfd_is_abs_section(a))
+// continue;
+ if (bfd_is_und_section(a))
+ continue;
+ if (bfd_is_com_section(a))
+ continue;
+// if ((a->flags & SEC_RELOC) == 0)
+// continue;
+
+ /*
+ * Only relocate things in the data sections if we are PIC/GOT.
+ * otherwise do text as well
+ */
+ if (!pic_with_got && (a->flags & SEC_CODE))
+ sectionp = text + (a->vma - text_vma);
+ else if (a->flags & SEC_DATA)
+ sectionp = data + (a->vma - data_vma);
+ else
+ continue;
+
+ /* Now search for the equivalent section in the relocation binary
+ * and use that relocation information to build reloc entries
+ * for this one.
+ */
+ for (r=rel_bfd->sections; r != NULL; r=r->next)
+ if (strcmp(a->name, r->name) == 0)
+ break;
+ if (r == NULL)
+ continue;
+ if (verbose)
+ printf(" RELOCS: %s [0x%x]: flags=0x%x vma=0x%x\n", r->name, r,
+ r->flags, bfd_section_vma(abs_bfd, r));
+ if ((r->flags & SEC_RELOC) == 0)
+ continue;
+ relsize = bfd_get_reloc_upper_bound(rel_bfd, r);
+ if (relsize <= 0) {
+ if (verbose)
+ printf("%s(%d): no relocation entries section=0x%x\n",
+ __FILE__, __LINE__, r->name);
+ continue;
+ }
+
+ symb = get_symbols(rel_bfd, &nsymb);
+ relpp = (arelent **) xmalloc(relsize);
+ relcount = bfd_canonicalize_reloc(rel_bfd, r, relpp, symb);
+ if (relcount <= 0) {
+ if (verbose)
+ printf("%s(%d): no relocation entries section=%s\n",
+ __FILE__, __LINE__, r->name);
+ continue;
+ } else {
+ for (p = relpp; (relcount && (*p != NULL)); p++, relcount--) {
+ unsigned char *r_mem;
+ int relocation_needed = 0;
+
+#ifdef TARGET_microblaze
+ /* The MICROBLAZE_XX_NONE relocs can be skipped.
+ They represent PC relative branches that the
+ linker has already resolved */
+
+ switch ((*p)->howto->type)
+ {
+ case R_MICROBLAZE_NONE:
+ case R_MICROBLAZE_64_NONE:
+ continue;
+ }
+#endif /* TARGET_microblaze */
+
+#ifdef TARGET_v850
+ /* Skip this relocation entirely if possible (we
+ do this early, before doing any other
+ processing on it). */
+ switch ((*p)->howto->type) {
+#ifdef R_V850_9_PCREL
+ case R_V850_9_PCREL:
+#endif
+#ifdef R_V850_22_PCREL
+ case R_V850_22_PCREL:
+#endif
+#ifdef R_V850_SDA_16_16_OFFSET
+ case R_V850_SDA_16_16_OFFSET:
+#endif
+#ifdef R_V850_SDA_15_16_OFFSET
+ case R_V850_SDA_15_16_OFFSET:
+#endif
+#ifdef R_V850_ZDA_15_16_OFFSET
+ case R_V850_ZDA_15_16_OFFSET:
+#endif
+#ifdef R_V850_TDA_6_8_OFFSET
+ case R_V850_TDA_6_8_OFFSET:
+#endif
+#ifdef R_V850_TDA_7_8_OFFSET
+ case R_V850_TDA_7_8_OFFSET:
+#endif
+#ifdef R_V850_TDA_7_7_OFFSET
+ case R_V850_TDA_7_7_OFFSET:
+#endif
+#ifdef R_V850_TDA_16_16_OFFSET
+ case R_V850_TDA_16_16_OFFSET:
+#endif
+#ifdef R_V850_TDA_4_5_OFFSET
+ case R_V850_TDA_4_5_OFFSET:
+#endif
+#ifdef R_V850_TDA_4_4_OFFSET
+ case R_V850_TDA_4_4_OFFSET:
+#endif
+#ifdef R_V850_SDA_16_16_SPLIT_OFFSET
+ case R_V850_SDA_16_16_SPLIT_OFFSET:
+#endif
+#ifdef R_V850_CALLT_6_7_OFFSET
+ case R_V850_CALLT_6_7_OFFSET:
+#endif
+#ifdef R_V850_CALLT_16_16_OFFSET
+ case R_V850_CALLT_16_16_OFFSET:
+#endif
+ /* These are relative relocations, which
+ have already been fixed up by the
+ linker at this point, so just ignore
+ them. */
+ continue;
+ }
+#endif /* USE_V850_RELOCS */
+
+ q = *p;
+ if (q->sym_ptr_ptr && *q->sym_ptr_ptr) {
+ sym_name = (*(q->sym_ptr_ptr))->name;
+ sym_section = (*(q->sym_ptr_ptr))->section;
+ section_name=(*(q->sym_ptr_ptr))->section->name;
+ } else {
+ printf("ERROR: undefined relocation entry\n");
+ rc = -1;
+ continue;
+ }
+#ifndef TARGET_bfin
+ /* Adjust the address to account for the GOT table which wasn't
+ * present in the relative file link.
+ */
+ if (pic_with_got && !use_resolved)
+ q->address += got_size;
+#endif
+
+ /* A pointer to what's being relocated, used often
+ below. */
+ r_mem = sectionp + q->address;
+
+ /*
+ * Fixup offset in the actual section.
+ */
+ addstr[0] = 0;
+#ifndef TARGET_e1
+ if ((sym_addr = get_symbol_offset((char *) sym_name,
+ sym_section, symbols, number_of_symbols)) == -1) {
+ sym_addr = 0;
+ }
+#else
+ sym_addr = (*(q->sym_ptr_ptr))->value;
+#endif
+ if (use_resolved) {
+ /* Use the address of the symbol already in
+ the program text. How this is handled may
+ still depend on the particular relocation
+ though. */
+ switch (q->howto->type) {
+ int r2_type;
+#ifdef TARGET_v850
+ case R_V850_HI16_S:
+ /* We specially handle adjacent
+ HI16_S/ZDA_15_16_OFFSET and
+ HI16_S/LO16 pairs that reference the
+ same address (these are usually
+ movhi/ld and movhi/movea pairs,
+ respectively). */
+ if (relcount == 0)
+ r2_type = R_V850_NONE;
+ else
+ r2_type = p[1]->howto->type;
+ if ((r2_type == R_V850_ZDA_15_16_OFFSET
+ || r2_type == R_V850_LO16)
+ && (p[0]->sym_ptr_ptr
+ == p[1]->sym_ptr_ptr)
+ && (p[0]->addend == p[1]->addend))
+ {
+ relocation_needed = 1;
+
+ switch (r2_type) {
+ case R_V850_ZDA_15_16_OFFSET:
+ pflags = 0x10000000;
+ break;
+ case R_V850_LO16:
+ pflags = 0x20000000;
+ break;
+ }
+
+ /* We don't really need the
+ actual value -- the bits
+ produced by the linker are
+ what we want in the final
+ flat file -- but get it
+ anyway if useful for
+ debugging. */
+ if (verbose) {
+ unsigned char *r2_mem =
+ sectionp
+ + p[1]->address;
+ /* little-endian */
+ int hi = r_mem[0]
+ + (r_mem[1] << 8);
+ int lo = r2_mem[0]
+ + (r2_mem[1] << 8);
+ /* Sign extend LO. */
+ lo = (lo ^ 0x8000)
+ - 0x8000;
+
+ /* Maybe ignore the LSB
+ of LO, which is
+ actually part of the
+ instruction. */
+ if (r2_type != R_V850_LO16)
+ lo &= ~1;
+
+ sym_addr =
+ (hi << 16)
+ + lo;
+ }
+ } else
+ goto bad_resolved_reloc;
+ break;
+
+ case R_V850_LO16:
+ /* See if this is actually the
+ 2nd half of a pair. */
+ if (p > relpp
+ && (p[-1]->howto->type
+ == R_V850_HI16_S)
+ && (p[-1]->sym_ptr_ptr
+ == p[0]->sym_ptr_ptr)
+ && (p[-1]->addend == p[0]->addend))
+ break; /* not an error */
+ else
+ goto bad_resolved_reloc;
+
+ case R_V850_HI16:
+ goto bad_resolved_reloc;
+ default:
+ goto good_32bit_resolved_reloc;
+#elif defined(TARGET_arm)
+ case R_ARM_ABS32:
+ relocation_needed = 1;
+ break;
+ case R_ARM_REL32:
+ case R_ARM_THM_PC11:
+ case R_ARM_THM_PC22:
+ relocation_needed = 0;
+ break;
+ default:
+ goto bad_resolved_reloc;
+#elif defined(TARGET_m68k)
+ case R_68K_32:
+ goto good_32bit_resolved_reloc;
+ case R_68K_PC32:
+ case R_68K_PC16:
+ /* The linker has already resolved
+ PC relocs for us. In PIC links,
+ the symbol must be in the data
+ segment. */
+ case R_68K_NONE:
+ continue;
+ default:
+ goto bad_resolved_reloc;
+#else
+ default:
+ /* The default is to assume that the
+ relocation is relative and has
+ already been fixed up by the
+ linker (perhaps we ought to make
+ give an error by default, and
+ require `safe' relocations to be
+ enumberated explicitly?). */
+ goto good_32bit_resolved_reloc;
+#endif
+ good_32bit_resolved_reloc:
+ if (bfd_big_endian (abs_bfd))
+ sym_addr =
+ (r_mem[0] << 24)
+ + (r_mem[1] << 16)
+ + (r_mem[2] << 8)
+ + r_mem[3];
+ else
+ sym_addr =
+ r_mem[0]
+ + (r_mem[1] << 8)
+ + (r_mem[2] << 16)
+ + (r_mem[3] << 24);
+ relocation_needed = 1;
+ break;
+
+ bad_resolved_reloc:
+ printf("ERROR: reloc type %s unsupported in this context\n",
+ q->howto->name);
+ bad_relocs++;
+ break;
+ }
+ } else {
+ /* Calculate the sym address ourselves. */
+ sym_reloc_size = bfd_get_reloc_size(q->howto);
+
+#if !defined(TARGET_h8300) && !defined(TARGET_e1) && !defined(TARGET_bfin) && !defined(TARGET_m68k)
+ if (sym_reloc_size != 4) {
+ printf("ERROR: bad reloc type %d size=%d for symbol=%s\n",
+ (*p)->howto->type, sym_reloc_size, sym_name);
+ bad_relocs++;
+ rc = -1;
+ continue;
+ }
+#endif
+
+ switch ((*p)->howto->type) {
+
+#if defined(TARGET_m68k)
+ case R_68K_32:
+ relocation_needed = 1;
+ sym_vma = bfd_section_vma(abs_bfd, sym_section);
+ sym_addr += sym_vma + q->addend;
+ break;
+ case R_68K_PC16:
+ case R_68K_PC32:
+ sym_vma = 0;
+ sym_addr += sym_vma + q->addend;
+ sym_addr -= q->address;
+ break;
+#endif
+
+#if defined(TARGET_arm)
+ case R_ARM_ABS32:
+ relocation_needed = 1;
+ if (verbose)
+ fprintf(stderr,
+ "%s vma=0x%x, value=0x%x, address=0x%x "
+ "sym_addr=0x%x rs=0x%x, opcode=0x%x\n",
+ "ABS32",
+ sym_vma, (*(q->sym_ptr_ptr))->value,
+ q->address, sym_addr,
+ (*p)->howto->rightshift,
+ *(unsigned long *)r_mem);
+ sym_vma = bfd_section_vma(abs_bfd, sym_section);
+ sym_addr += sym_vma + q->addend;
+ break;
+ case R_ARM_GOT32:
+ case R_ARM_GOTPC:
+ /* Should be fine as is */
+ break;
+ case R_ARM_PLT32:
+ if (verbose)
+ fprintf(stderr,
+ "%s vma=0x%x, value=0x%x, address=0x%x "
+ "sym_addr=0x%x rs=0x%x, opcode=0x%x\n",
+ "PLT32",
+ sym_vma, (*(q->sym_ptr_ptr))->value,
+ q->address, sym_addr,
+ (*p)->howto->rightshift,
+ *(unsigned long *)r_mem);
+ case R_ARM_PC24:
+ sym_vma = 0;
+ sym_addr = (sym_addr-q->address)>>(*p)->howto->rightshift;
+ break;
+#endif
+
+#ifdef TARGET_v850
+ case R_V850_32:
+ relocation_needed = 1;
+ sym_vma = bfd_section_vma(abs_bfd, sym_section);
+ sym_addr += sym_vma + q->addend;
+ break;
+#if defined(R_V850_ZDA_16_16_OFFSET) || defined(R_V850_ZDA_16_16_SPLIT_OFFSET)
+#ifdef R_V850_ZDA_16_16_OFFSET
+ case R_V850_ZDA_16_16_OFFSET:
+#endif
+#ifdef R_V850_ZDA_16_16_SPLIT_OFFSET
+ case R_V850_ZDA_16_16_SPLIT_OFFSET:
+#endif
+ /* Can't support zero-relocations. */
+ printf ("ERROR: %s+0x%x: zero relocations not supported\n",
+ sym_name, q->addend);
+ continue;
+#endif /* R_V850_ZDA_16_16_OFFSET || R_V850_ZDA_16_16_SPLIT_OFFSET */
+#endif /* TARGET_v850 */
+
+#ifdef TARGET_h8300
+ case R_H8_DIR24R8:
+ if (sym_reloc_size != 4) {
+ printf("R_H8_DIR24R8 size %d\n", sym_reloc_size);
+ bad_relocs++;
+ continue;
+ }
+ relocation_needed = 1;
+ sym_addr = (*(q->sym_ptr_ptr))->value;
+ q->address -= 1;
+ r_mem -= 1; /* tracks q->address */
+ sym_vma = bfd_section_vma(abs_bfd, sym_section);
+ sym_addr += sym_vma + q->addend;
+ sym_addr |= (*(unsigned char *)r_mem<<24);
+ break;
+ case R_H8_DIR24A8:
+ if (sym_reloc_size != 4) {
+ printf("R_H8_DIR24A8 size %d\n", sym_reloc_size);
+ bad_relocs++;
+ continue;
+ }
+ /* Absolute symbol done not relocation */
+ relocation_needed = !bfd_is_abs_section(sym_section);
+ sym_addr = (*(q->sym_ptr_ptr))->value;
+ sym_vma = bfd_section_vma(abs_bfd, sym_section);
+ sym_addr += sym_vma + q->addend;
+ break;
+ case R_H8_DIR32:
+ case R_H8_DIR32A16: /* currently 32, could be made 16 */
+ if (sym_reloc_size != 4) {
+ printf("R_H8_DIR32 size %d\n", sym_reloc_size);
+ bad_relocs++;
+ continue;
+ }
+ relocation_needed = 1;
+ sym_addr = (*(q->sym_ptr_ptr))->value;
+ sym_vma = bfd_section_vma(abs_bfd, sym_section);
+ sym_addr += sym_vma + q->addend;
+ break;
+ case R_H8_PCREL16:
+ sym_vma = 0;
+ sym_addr = (*(q->sym_ptr_ptr))->value;
+ sym_addr += sym_vma + q->addend;
+ sym_addr -= (q->address + 2);
+ if (bfd_big_endian(abs_bfd))
+ *(unsigned short *)r_mem =
+ bfd_big_endian(abs_bfd) ? htons(sym_addr) : sym_addr;
+ continue;
+ case R_H8_PCREL8:
+ sym_vma = 0;
+ sym_addr = (*(q->sym_ptr_ptr))->value;
+ sym_addr += sym_vma + q->addend;
+ sym_addr -= (q->address + 1);
+ *(unsigned char *)r_mem = sym_addr;
+ continue;
+#endif
+
+#ifdef TARGET_microblaze
+ case R_MICROBLAZE_64:
+ /* The symbol is split over two consecutive instructions.
+ Flag this to the flat loader by setting the high bit of
+ the relocation symbol. */
+ {
+ unsigned char *p = r_mem;
+ unsigned long offset;
+ pflags=0x80000000;
+
+ /* work out the relocation */
+ sym_vma = bfd_section_vma(abs_bfd, sym_section);
+ /* grab any offset from the text */
+ offset = (p[2]<<24) + (p[3] << 16) + (p[6] << 8) + (p[7]);
+ /* Update the address */
+ sym_addr += offset + sym_vma + q->addend;
+ /* Write relocated pointer back */
+ p[2] = (sym_addr >> 24) & 0xff;
+ p[3] = (sym_addr >> 16) & 0xff;
+ p[6] = (sym_addr >> 8) & 0xff;
+ p[7] = sym_addr & 0xff;
+
+ /* create a new reloc entry */
+ flat_relocs = realloc(flat_relocs,
+ (flat_reloc_count + 1) * sizeof(uint32_t));
+ flat_relocs[flat_reloc_count] = pflags | (section_vma + q->address);
+ flat_reloc_count++;
+ relocation_needed = 0;
+ pflags = 0;
+ sprintf(&addstr[0], "+0x%x", sym_addr - (*(q->sym_ptr_ptr))->value -
+ bfd_section_vma(abs_bfd, sym_section));
+ if (verbose)
+ printf(" RELOC[%d]: offset=0x%x symbol=%s%s "
+ "section=%s size=%d "
+ "fixup=0x%x (reloc=0x%x)\n", flat_reloc_count,
+ q->address, sym_name, addstr,
+ section_name, sym_reloc_size,
+ sym_addr, section_vma + q->address);
+ if (verbose)
+ printf("reloc[%d] = 0x%x\n", flat_reloc_count,
+ section_vma + q->address);
+
+ continue;
+ }
+ case R_MICROBLAZE_32:
+ {
+ unsigned char *p = r_mem;
+ unsigned long offset;
+
+ /* grab any offset from the text */
+ offset = (p[0]<<24) + (p[1] << 16) + (p[2] << 8) + (p[3]);
+ sym_vma = bfd_section_vma(abs_bfd, sym_section);
+ /* This is a horrible kludge. For some
+ reason, *sometimes* the offset is in
+ both addend and the code. Detect
+ it, and cancel the effect. Otherwise
+ the offset gets added twice - ouch.
+ There should be a better test
+ for this condition, based on the
+ BFD data structures */
+ if(offset==q->addend)
+ offset=0;
+
+ sym_addr += offset + sym_vma + q->addend;
+ relocation_needed = 1;
+ break;
+ }
+ case R_MICROBLAZE_64_PCREL:
+ sym_vma = 0;
+ //sym_addr = (*(q->sym_ptr_ptr))->value;
+ sym_addr += sym_vma + q->addend;
+ sym_addr -= (q->address + 4);
+ sym_addr = htonl(sym_addr);
+ /* insert 16 MSB */
+ * ((unsigned short *) (r_mem+2)) |= (sym_addr) & 0xFFFF;
+ /* then 16 LSB */
+ * ((unsigned short *) (r_mem+6)) |= (sym_addr >> 16) & 0xFFFF;
+ /* We've done all the work, so continue
+ to next reloc instead of break */
+ continue;
+
+#endif /* TARGET_microblaze */
+
+#ifdef TARGET_nios2
+#define htoniosl(x) (x)
+#define niostohl(x) (x)
+ case R_NIOS2_BFD_RELOC_32:
+ relocation_needed = 1;
+ pflags = (FLAT_NIOS2_R_32 << 28);
+ sym_vma = bfd_section_vma(abs_bfd, sym_section);
+ sym_addr += sym_vma + q->addend;
+ /* modify target, in target order */
+ *(unsigned long *)r_mem = htoniosl(sym_addr);
+ break;
+ case R_NIOS2_CALL26:
+ {
+ unsigned long exist_val;
+ relocation_needed = 1;
+ pflags = (FLAT_NIOS2_R_CALL26 << 28);
+ sym_vma = bfd_section_vma(abs_bfd, sym_section);
+ sym_addr += sym_vma + q->addend;
+
+ /* modify target, in target order */
+ // exist_val = niostohl(*(unsigned long *)r_mem);
+ exist_val = ((sym_addr >> 2) << 6);
+ *(unsigned long *)r_mem = htoniosl(exist_val);
+ break;
+ }
+ case R_NIOS2_HIADJ16:
+ case R_NIOS2_HI16:
+ {
+ unsigned long exist_val;
+ int r2_type;
+ /* handle the adjacent HI/LO pairs */
+ if (relcount == 0)
+ r2_type = R_NIOS2_NONE;
+ else
+ r2_type = p[1]->howto->type;
+ if ((r2_type == R_NIOS2_LO16)
+ && (p[0]->sym_ptr_ptr == p[1]->sym_ptr_ptr)
+ && (p[0]->addend == p[1]->addend))
+ {
+ unsigned char * r2_mem = sectionp + p[1]->address;
+ if (p[1]->address - q->address!=4)
+ printf("Err: HI/LO not adjacent %d\n", p[1]->address - q->address);
+ relocation_needed = 1;
+ pflags = (q->howto->type == R_NIOS2_HIADJ16)
+ ? FLAT_NIOS2_R_HIADJ_LO : FLAT_NIOS2_R_HI_LO;
+ pflags <<= 28;
+
+ sym_vma = bfd_section_vma(abs_bfd, sym_section);
+ sym_addr += sym_vma + q->addend;
+
+ /* modify high 16 bits, in target order */
+ exist_val = niostohl(*(unsigned long *)r_mem);
+ exist_val = ((exist_val >> 22) << 22) | (exist_val & 0x3f);
+ if (q->howto->type == R_NIOS2_HIADJ16)
+ exist_val |= ((((sym_addr >> 16) + ((sym_addr >> 15) & 1)) & 0xFFFF) << 6);
+ else
+ exist_val |= (((sym_addr >> 16) & 0xFFFF) << 6);
+ *(unsigned long *)r_mem = htoniosl(exist_val);
+
+ /* modify low 16 bits, in target order */
+ exist_val = niostohl(*(unsigned long *)r2_mem);
+ exist_val = ((exist_val >> 22) << 22) | (exist_val & 0x3f);
+ exist_val |= ((sym_addr & 0xFFFF) << 6);
+ *(unsigned long *)r2_mem = htoniosl(exist_val);
+
+ } else
+ goto NIOS2_RELOC_ERR;
+ }
+ break;
+
+ case R_NIOS2_GPREL:
+ {
+ unsigned long exist_val, temp;
+ //long gp = get_symbol_offset("_gp", sym_section, symbols, number_of_symbols);
+ long gp = get_gp_value(symbols, number_of_symbols);
+ if (gp == -1) {
+ printf("Err: unresolved symbol _gp when relocating %s\n", sym_name);
+ goto NIOS2_RELOC_ERR;
+ }
+ /* _gp holds a absolute value, otherwise the ld cannot generate correct code */
+ sym_vma = bfd_section_vma(abs_bfd, sym_section);
+ //printf("sym=%x, %d, _gp=%x, %d\n", sym_addr+sym_vma, sym_addr+sym_vma, gp, gp);
+ sym_addr += sym_vma + q->addend;
+ sym_addr -= gp;
+ //printf("sym - _gp=%x, %d\n", sym_addr, sym_addr);
+ /* modify the target, in target order (little_endian) */
+ exist_val = niostohl(*(unsigned long *)r_mem);
+ temp = ((exist_val >> 6) & 0x3ff0000) | (sym_addr & 0xffff);
+ temp <<= 6;
+ temp |= (exist_val & 0x3f);
+ *(unsigned long *)r_mem = htoniosl(temp);
+ if (verbose)
+ printf("omit: offset=0x%x symbol=%s%s "
+ "section=%s size=%d "
+ "fixup=0x%x (reloc=0x%x) GPREL\n",
+ q->address, sym_name, addstr,
+ section_name, sym_reloc_size,
+ sym_addr, section_vma + q->address);
+ continue;
+ }
+ case R_NIOS2_PCREL16:
+ {
+ unsigned long exist_val;
+ sym_vma = 0;
+ sym_addr += sym_vma + q->addend;
+ sym_addr -= (q->address + 4);
+ /* modify the target, in target order (little_endian) */
+ exist_val = niostohl(*(unsigned long *)r_mem);
+ exist_val = ((exist_val >> 22) << 22) | (exist_val & 0x3f);
+ exist_val |= ((sym_addr & 0xFFFF) << 6);
+ *(unsigned long *)r_mem = htoniosl(exist_val);
+ if (verbose)
+ printf("omit: offset=0x%x symbol=%s%s "
+ "section=%s size=%d "
+ "fixup=0x%x (reloc=0x%x) PCREL\n",
+ q->address, sym_name, addstr,
+ section_name, sym_reloc_size,
+ sym_addr, section_vma + q->address);
+ continue;
+ }
+
+ case R_NIOS2_LO16:
+ /* check if this is actually the 2nd half of a pair */
+ if ((p > relpp)
+ && ((p[-1]->howto->type == R_NIOS2_HIADJ16)
+ || (p[-1]->howto->type == R_NIOS2_HI16))
+ && (p[-1]->sym_ptr_ptr == p[0]->sym_ptr_ptr)
+ && (p[-1]->addend == p[0]->addend)) {
+ if (verbose)
+ printf("omit: offset=0x%x symbol=%s%s "
+ "section=%s size=%d LO16\n",
+ q->address, sym_name, addstr,
+ section_name, sym_reloc_size);
+ continue;
+ }
+
+ /* error, fall through */
+
+ case R_NIOS2_S16:
+ case R_NIOS2_U16:
+ case R_NIOS2_CACHE_OPX:
+ case R_NIOS2_IMM5:
+ case R_NIOS2_IMM6:
+ case R_NIOS2_IMM8:
+ case R_NIOS2_BFD_RELOC_16:
+ case R_NIOS2_BFD_RELOC_8:
+ case R_NIOS2_GNU_VTINHERIT:
+ case R_NIOS2_GNU_VTENTRY:
+ case R_NIOS2_UJMP:
+ case R_NIOS2_CJMP:
+ case R_NIOS2_CALLR:
+NIOS2_RELOC_ERR:
+ printf("Err: unexpected reloc type %s(%d)\n", q->howto->name, q->howto->type);
+ bad_relocs++;
+ continue;
+#endif /* TARGET_nios2 */
+
+#ifdef TARGET_sparc
+ case R_SPARC_32:
+ case R_SPARC_UA32:
+ relocation_needed = 1;
+ sym_vma = bfd_section_vma(abs_bfd, sym_section);
+ sym_addr += sym_vma + q->addend;
+ break;
+ case R_SPARC_PC22:
+ sym_vma = 0;
+ sym_addr += sym_vma + q->addend;
+ sym_addr -= q->address;
+ break;
+ case R_SPARC_WDISP30:
+ sym_addr = (((*(q->sym_ptr_ptr))->value-
+ q->address) >> 2) & 0x3fffffff;
+ sym_addr |= (
+ ntohl(*(unsigned long *)r_mem)
+ & 0xc0000000
+ );
+ break;
+ case R_SPARC_HI22:
+ relocation_needed = 1;
+ pflags = 0x80000000;
+ sym_vma = bfd_section_vma(abs_bfd, sym_section);
+ sym_addr += sym_vma + q->addend;
+ sym_addr |= (
+ htonl(*(unsigned long *)r_mem)
+ & 0xffc00000
+ );
+ break;
+ case R_SPARC_LO10:
+ relocation_needed = 1;
+ pflags = 0x40000000;
+ sym_vma = bfd_section_vma(abs_bfd, sym_section);
+ sym_addr += sym_vma + q->addend;
+ sym_addr &= 0x000003ff;
+ sym_addr |= (
+ htonl(*(unsigned long *)r_mem)
+ & 0xfffffc00
+ );
+ break;
+#endif /* TARGET_sparc */
+
+#ifdef TARGET_bfin
+ case R_pcrel12_jump:
+ case R_pcrel12_jump_s:
+ case R_pcrel24:
+ case R_pcrel24_jump_l:
+ case R_pcrel24_jump_x:
+ case R_pcrel24_call_x:
+ case R_pcrel10:
+ case R_pcrel11:
+ case R_pcrel5m2:
+ sym_addr += q->addend;// get the symbol addr
+ sym_vma = bfd_section_vma(abs_bfd, sym_section);
+ sym_addr -= q->address; // make it PC relative
+ // implicitly assumes code section and symbol section are same
+ break;
+ case R_got:
+ /* Ignore these. */
+ break;
+
+ case R_rimm16:
+ sym_addr += q->addend;
+ if(weak_und_symbol(sym_section->name, (*(q->sym_ptr_ptr))))
+ continue;
+ if(0xFFFF0000 & sym_addr){
+ fprintf (stderr, "Relocation overflow for rN = %s\n",sym_name);
+ bad_relocs++;
+ }
+ flat_relocs = (uint32_t *)
+ (realloc (flat_relocs, (flat_reloc_count + 1) * sizeof (uint32_t)));
+ if (bfin_set_reloc (flat_relocs + flat_reloc_count,
+ sym_section->name, sym_name,
+ (*(q->sym_ptr_ptr)),
+ 0, FLAT_RELOC_PART_LO,
+ section_vma + q->address))
+ bad_relocs++;
+ flat_reloc_count++;
+ break;
+
+ case R_luimm16:
+ case R_huimm16:
+ {
+ unsigned int sp;
+ unsigned int reloc_count_incr;
+ unsigned int hi_lo;
+
+ if (q->howto->type == R_luimm16)
+ hi_lo = FLAT_RELOC_PART_LO;
+ else
+ hi_lo = FLAT_RELOC_PART_HI;
+
+ sym_addr += q->addend;
+
+ flat_relocs = (uint32_t *)
+ (realloc (flat_relocs, (flat_reloc_count + 2) * sizeof (uint32_t)));
+ reloc_count_incr = 1;
+ if (weak_und_symbol (sym_section->name, (*(q->sym_ptr_ptr))))
+ continue;
+ if (0xFFFF0000 & sym_addr) {
+ /* value is > 16 bits - use an extra field */
+ /* see if we have already output that symbol */
+ /* reloc may be addend from symbol and */
+ /* we can only store 16 bit offsets */
+ sp = 1;
+ if ((*(q->sym_ptr_ptr))->udata.i == 0
+ || flat_relocs[(*(q->sym_ptr_ptr))->udata.i] != sym_addr
+ || ((*(q->sym_ptr_ptr))->udata.i & 0xFFFF0000))
+ {
+ reloc_count_incr = 2;
+ flat_relocs[flat_reloc_count + 1] = sym_addr;
+ (*(q->sym_ptr_ptr))->udata.i = flat_reloc_count + 1;
+ sym_addr = 0; // indication to loader to read next
+ } else{
+ sym_addr = (*(q->sym_ptr_ptr))->udata.i;
+ }
+ } else {
+ sp = 0;
+ }
+
+ if (bfin_set_reloc (flat_relocs + flat_reloc_count,
+ sym_section->name, sym_name,
+ (*(q->sym_ptr_ptr)),
+ sp, hi_lo,
+ section_vma + q->address))
+ bad_relocs++;
+ flat_reloc_count += reloc_count_incr;
+ break;
+ }
+ case R_byte4_data:
+ sym_addr += q->addend;
+
+ if (weak_und_symbol (sym_section->name, *q->sym_ptr_ptr))
+ continue;
+
+ flat_relocs = (uint32_t *)
+ (realloc (flat_relocs, (flat_reloc_count + 1) * sizeof (uint32_t)));
+ if (bfin_set_reloc (flat_relocs + flat_reloc_count,
+ sym_section->name, sym_name,
+ (*(q->sym_ptr_ptr)),
+ 2, FLAT_RELOC_PART_LO,
+ section_vma + q->address))
+ bad_relocs++;
+
+ flat_reloc_count++;
+ break;
+
+#endif //TARGET_bfin
+
+#ifdef TARGET_sh
+ case R_SH_DIR32:
+ relocation_needed = 1;
+ sym_vma = bfd_section_vma(abs_bfd, sym_section);
+ sym_addr += sym_vma + q->addend;
+ break;
+ case R_SH_REL32:
+ sym_vma = 0;
+ sym_addr += sym_vma + q->addend;
+ sym_addr -= q->address;
+ break;
+#endif /* TARGET_sh */
+
+#ifdef TARGET_e1
+#define htoe1l(x) htonl(x)
+
+#if 0
+#define DEBUG_E1
+#endif
+
+#ifdef DEBUG_E1
+#define DBG_E1 printf
+#else
+#define DBG_E1(x, ... )
+#endif
+
+#define _32BITS_RELOC 0x00000000
+#define _30BITS_RELOC 0x80000000
+#define _28BITS_RELOC 0x40000000
+ {
+ char *p;
+ unsigned long sec_vma, exist_val, S;
+ case R_E1_CONST31:
+ relocation_needed = 1;
+ DBG_E1("Handling Reloc <CONST31>\n");
+ sec_vma = bfd_section_vma(abs_bfd, sym_section);
+ DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x], q->address : [0x%x]\n",
+ sec_vma, sym_addr, q->address);
+ sym_addr = sec_vma + sym_addr;
+ exist_val = *(unsigned long*)((unsigned long)sectionp + q->address + 2);
+ DBG_E1("Orig:exist_val : [0x%08x]\n", exist_val);
+ exist_val = htoe1l(exist_val);
+ DBG_E1("HtoBE:exist_val : [0x%08x]\n", exist_val);
+ sym_addr += exist_val;
+ pflags = _30BITS_RELOC;
+ break;
+ case R_E1_CONST31_PCREL:
+ relocation_needed = 0;
+ DBG_E1("Handling Reloc <CONST31_PCREL>\n");
+ DBG_E1("DONT RELOCATE AT LOADING\n");
+ sec_vma = bfd_section_vma(abs_bfd, sym_section);
+ DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x], q->address : [0x%x]\n",
+ sec_vma, sym_addr, q->address);
+ sym_addr = sec_vma + sym_addr;
+ DBG_E1("sym_addr = sec_vma + sym_addr : [0x%x]\n", sym_addr );
+
+ DBG_E1("q->address : 0x%x, section_vma : 0x%x\n", q->address,
+ section_vma );
+ q->address = q->address + section_vma;
+ DBG_E1("q->address += section_vma : 0x%x\n", q->address );
+
+ if( (sym_addr = (sym_addr - q->address - 6)) < 0 )
+ DBG_E1("NEGATIVE OFFSET in PC Relative instruction\n");
+ DBG_E1( "sym_addr := sym_addr - q->address - "
+ "sizeof(CONST31_PCREL): [0x%x]\n",
+ sym_addr );
+ exist_val = *(unsigned long*)((unsigned long)sectionp + q->address + 2);
+ DBG_E1("Orig:exist_val : [0x%08x]\n", exist_val);
+ exist_val = htoe1l(exist_val);
+ DBG_E1("HtoBE:exist_val : [0x%08x]\n", exist_val);
+ sym_addr |= exist_val;
+ DBG_E1("sym_addr |= exist_val) : [0x%x]\n", sym_addr );
+ break;
+ case R_E1_DIS29W_PCREL:
+ relocation_needed = 0;
+ DBG_E1("Handling Reloc <DIS29W_PCREL>\n");
+ DBG_E1("DONT RELOCATE AT LOADING\n");
+ sec_vma = bfd_section_vma(abs_bfd, sym_section);
+ DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x], q->address : [0x%x]\n",
+ sec_vma, sym_addr, q->address);
+ sym_addr = sec_vma + sym_addr;
+ DBG_E1("sym_addr = sec_vma + sym_addr : [0x%x]\n", sym_addr );
+
+ DBG_E1("q->address : 0x%x, section_vma : 0x%x\n", q->address,
+ section_vma );
+ q->address = q->address + section_vma;
+ DBG_E1("q->address += section_vma : 0x%x\n", q->address );
+
+ if( (sym_addr = (sym_addr - q->address - 6)) < 0 )
+ DBG_E1("NEGATIVE OFFSET in PC Relative instruction\n");
+ DBG_E1( "sym_addr := sym_addr - q->address - "
+ "sizeof(CONST31_PCREL): [0x%x]\n",
+ sym_addr );
+ DBG_E1("sectionp:[0x%x], q->address:[0x%x]\n", sectionp, q->address );
+ exist_val = *(unsigned long*)((unsigned long)sectionp + q->address + 2);
+ DBG_E1("Original:exist_val : [0x%08x]\n",exist_val);
+ exist_val = htoe1l(exist_val);
+ DBG_E1("HtoBE:exist_val : [0x%08x]\n",exist_val);
+ sym_addr += exist_val;
+ break;
+ case R_E1_DIS29W:
+ DBG_E1("Handling Reloc <DIS29W>\n");
+ goto DIS29_RELOCATION;
+ case R_E1_DIS29H:
+ DBG_E1("Handling Reloc <DIS29H>\n");
+ goto DIS29_RELOCATION;
+ case R_E1_DIS29B:
+ DBG_E1("Handling Reloc <DIS29B>\n");
+DIS29_RELOCATION:
+ relocation_needed = 1;
+ sec_vma = bfd_section_vma(abs_bfd, sym_section);
+ DBG_E1("sec_vma : [0x%x], sym_addr : [0x%08x]\n",
+ sec_vma, sym_addr);
+ sym_addr = sec_vma + sym_addr;
+ DBG_E1("sym_addr = sec_vma + sym_addr : [0x%08x]\n", sym_addr);
+ exist_val = *(unsigned long*)((unsigned long)sectionp + q->address + 2);
+ DBG_E1("Orig:exist_val : [0x%08x]\n", exist_val);
+ exist_val = htoe1l(exist_val);
+ DBG_E1("HtoBE:exist_val : [0x%08x]\n", exist_val);
+ sym_addr += exist_val;
+ DBG_E1("sym_addr += exist_val : [0x%08x]\n", sym_addr);
+ pflags = _28BITS_RELOC;
+ break;
+ case R_E1_IMM32_PCREL:
+ relocation_needed = 0;
+ DBG_E1("Handling Reloc <IMM32_PCREL>\n");
+ DBG_E1("DONT RELOCATE AT LOADING\n");
+ sec_vma = bfd_section_vma(abs_bfd, sym_section);
+ DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x]\n",
+ sec_vma, sym_addr);
+ sym_addr = sec_vma + sym_addr;
+
+ DBG_E1("sym_addr = sec_vma + sym_addr : [0x%x]\n", sym_addr );
+ DBG_E1("q->address : 0x%x, section_vma : 0x%x\n", q->address,
+ section_vma );
+ q->address = q->address + section_vma;
+ DBG_E1("q->address += section_vma : 0x%x\n", q->address );
+
+ if( (sym_addr = (sym_addr - q->address - 6 )) < 0 )
+ DBG_E1("NEGATIVE OFFSET in PC Relative instruction\n");
+ DBG_E1( "sym_addr := sym_addr - q->address - "
+ "sizeof(CONST31_PCREL): [0x%x]\n",
+ sym_addr );
+ DBG_E1("sectionp:[0x%x], q->address:[0x%x]\n", sectionp, q->address );
+ exist_val = *(unsigned long*)((unsigned long)sectionp + q->address + 2);
+ DBG_E1("Original:exist_val : [0x%08x]\n",exist_val);
+ exist_val = htoe1l(exist_val);
+ DBG_E1("HtoBE:exist_val : [0x%08x]\n",exist_val);
+ sym_addr += exist_val;
+ break;
+ case R_E1_IMM32:
+ relocation_needed = 1;
+ DBG_E1("Handling Reloc <IMM32>\n");
+ sec_vma = bfd_section_vma(abs_bfd, sym_section);
+ DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x]\n",
+ sec_vma, sym_addr);
+ sym_addr = sec_vma + sym_addr;
+ DBG_E1("sym_addr = sec_vma + sym_addr : [0x%x]\n", sym_addr );
+ DBG_E1("sectionp:[0x%x], q->address:[0x%x]\n", sectionp, q->address );
+ exist_val = *(unsigned long*)((unsigned long)sectionp + q->address + 2);
+ DBG_E1("Original:exist_val : [0x%08x]\n",exist_val);
+ exist_val = htoe1l(exist_val);
+ DBG_E1("HtoBE:exist_val : [0x%08x]\n",exist_val);
+ sym_addr += exist_val;
+ pflags = _32BITS_RELOC;
+ break;
+ case R_E1_WORD:
+ relocation_needed = 1;
+ DBG_E1("Handling Reloc <WORD>\n");
+ sec_vma = bfd_section_vma(abs_bfd, sym_section);
+ DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x]\n",
+ sec_vma, sym_addr);
+ sym_addr = sec_vma + sym_addr;
+ DBG_E1("sym_addr = sec_vma + sym_addr : [0x%x]\n", sym_addr );
+ exist_val = *(unsigned long*)((unsigned long)sectionp + q->address );
+ DBG_E1("Orig:exist_val : [0x%08x]\n", exist_val);
+ exist_val = htoe1l(exist_val);
+ DBG_E1("HtoBE:exist_val : [0x%08x]\n", exist_val);
+ sym_addr += exist_val;
+ DBG_E1("sym_addr += exist_val : [0x%08x]\n", sym_addr);
+ pflags = _32BITS_RELOC;
+ break;
+ }
+#undef _32BITS_RELOC
+#undef _30BITS_RELOC
+#undef _28BITS_RELOC
+#endif
+ default:
+ /* missing support for other types of relocs */
+ printf("ERROR: bad reloc type %d\n", (*p)->howto->type);
+ bad_relocs++;
+ continue;
+ }
+ }
+
+ sprintf(&addstr[0], "+0x%x", sym_addr - (*(q->sym_ptr_ptr))->value -
+ bfd_section_vma(abs_bfd, sym_section));
+
+
+ /*
+ * for full elf relocation we have to write back the
+ * start_code relative value to use.
+ */
+ if (!pic_with_got) {
+#if defined(TARGET_arm)
+ union {
+ unsigned char c[4];
+ unsigned long l;
+ } tmp;
+ long hl;
+ int i0, i1, i2, i3;
+
+ /*
+ * horrible nasty hack to support different endianess
+ */
+ if (!bfd_big_endian(abs_bfd)) {
+ i0 = 0;
+ i1 = 1;
+ i2 = 2;
+ i3 = 3;
+ } else {
+ i0 = 3;
+ i1 = 2;
+ i2 = 1;
+ i3 = 0;
+ }
+
+ tmp.l = *(unsigned long *)r_mem;
+ hl = tmp.c[i0] | (tmp.c[i1] << 8) | (tmp.c[i2] << 16);
+ if (use_resolved ||
+ (((*p)->howto->type != R_ARM_PC24) &&
+ ((*p)->howto->type != R_ARM_PLT32)))
+ hl |= (tmp.c[i3] << 24);
+ else if (tmp.c[i2] & 0x80)
+ hl |= 0xff000000; /* sign extend */
+ if (!use_resolved)
+ hl += sym_addr;
+ tmp.c[i0] = hl & 0xff;
+ tmp.c[i1] = (hl >> 8) & 0xff;
+ tmp.c[i2] = (hl >> 16) & 0xff;
+ if (use_resolved ||
+ (((*p)->howto->type != R_ARM_PC24) &&
+ ((*p)->howto->type != R_ARM_PLT32)))
+ tmp.c[i3] = (hl >> 24) & 0xff;
+ if ((*p)->howto->type == R_ARM_ABS32)
+ *(unsigned long *)r_mem = htonl(hl);
+ else
+ *(unsigned long *)r_mem = tmp.l;
+
+#elif defined(TARGET_bfin)
+ if ((*p)->howto->type == R_pcrel24
+ || (*p)->howto->type == R_pcrel24_jump_l
+ || (*p)->howto->type == R_pcrel24_jump_x
+ || (*p)->howto->type == R_pcrel24_call_x)
+ {
+ sym_addr += 2*-1*PCREL24_MAGIC_OFFSET;
+ *((unsigned short *)(sectionp + q->address) + 1 + PCREL24_MAGIC_OFFSET)
+ = (sym_addr >> 1) & 0xffff;
+ *((unsigned short *)(sectionp + q->address) + PCREL24_MAGIC_OFFSET)
+ = (0xff00 & *((unsigned short *) (sectionp + q->address) + PCREL24_MAGIC_OFFSET)
+ | ((sym_addr >> 17) & 0xff));
+ } else if ((*p)->howto->type == R_byte4_data) {
+ *((uint32_t *)(sectionp + q->address)) = sym_addr;
+ } else if ((*p)->howto->type == R_pcrel12_jump
+ || (*p)->howto->type == R_pcrel12_jump_s) {
+ *((unsigned short *)(sectionp + q->address))
+ = (0xf000 & *((unsigned short *)(sectionp + q->address))
+ | ((sym_addr >> 1) & 0xfff));
+ } else if ((*p)->howto->type == R_pcrel10) {
+ *((unsigned short *)(sectionp + q->address))
+ = (~0x3ff & *((unsigned short *)(sectionp + q->address))
+ | ((sym_addr >> 1) & 0x3ff));
+ } else if ((*p)->howto->type == R_rimm16
+ || (*p)->howto->type == R_huimm16
+ || (*p)->howto->type == R_luimm16) {
+ /* for l and h we set the lower 16 bits which is only when it will be used */
+ *((unsigned short *) (sectionp + q->address)) = (unsigned short) sym_addr;
+ } else if ((*p)->howto->type == R_pcrel5m2) {
+ *((unsigned short *)(sectionp + q->address))
+ = (0xfff0 & *((unsigned short *)(sectionp + q->address))
+ | ((sym_addr >> 1) & 0xf));
+ } else if ((*p)->howto->type == R_pcrel11){
+ *((unsigned short *)(sectionp + q->address))
+ = (0xfc00 & *((unsigned short *)(sectionp + q->address))
+ | ((sym_addr >> 1) & 0x3ff));
+ } else if (0xE0 <= (*p)->howto->type && 0xF3 >= (*p)->howto->type) {
+ //arith relocs dont generate a real relocation
+ } else {
+ printf("Blackfin relocation fail for reloc type: 0x%x\n", (*p)->howto->type);
+ }
+#elif defined(TARGET_e1)
+#define OPCODE_SIZE 2 /* Add 2 bytes, counting the opcode size*/
+ switch ((*p)->howto->type) {
+ case R_E1_CONST31:
+ case R_E1_CONST31_PCREL:
+ case R_E1_DIS29W_PCREL:
+ case R_E1_DIS29W:
+ case R_E1_DIS29H:
+ case R_E1_DIS29B:
+ case R_E1_IMM32_PCREL:
+ case R_E1_IMM32:
+ DBG_E1("In addr + 2:[0x%x] <- write [0x%x]\n",
+ (sectionp + q->address + 2), sym_addr );
+ *((unsigned long *) (sectionp + q->address + OPCODE_SIZE)) =
+ htonl(sym_addr);
+ break;
+ case R_E1_WORD:
+ DBG_E1("In addr : [0x%x] <- write [0x%x]\n",
+ (sectionp + q->address), sym_addr );
+ *((unsigned long *) (sectionp + q->address )) = htonl(sym_addr);
+ break;
+ default:
+ printf("ERROR:Unhandled Relocation. Exiting...\n");
+ exit(0);
+ break;
+ }
+#else /* ! TARGET_arm && ! TARGET_e1 */
+
+ switch (q->howto->type) {
+#ifdef TARGET_v850
+ case R_V850_HI16_S:
+ case R_V850_HI16:
+ case R_V850_LO16:
+ /* Do nothing -- for cases we handle,
+ the bits produced by the linker are
+ what we want in the final flat file
+ (and other cases are errors). Note
+ that unlike most relocated values,
+ it is stored in little-endian order,
+ but this is necessary to avoid
+ trashing the low-bit, and the float
+ loaders knows about it. */
+ break;
+#endif /* TARGET_V850 */
+
+#ifdef TARGET_nios2
+ case R_NIOS2_BFD_RELOC_32:
+ case R_NIOS2_CALL26:
+ case R_NIOS2_HIADJ16:
+ case R_NIOS2_HI16:
+ /* do nothing */
+ break;
+#endif /* TARGET_nios2 */
+
+#if defined(TARGET_m68k)
+ case R_68K_PC16:
+ if (sym_addr < -0x8000 || sym_addr > 0x7fff) {
+ fprintf (stderr, "Relocation overflow for R_68K_PC16 relocation against %s\n", sym_name);
+ bad_relocs++;
+ } else {
+ r_mem[0] = (sym_addr >> 8) & 0xff;
+ r_mem[1] = sym_addr & 0xff;
+ }
+ break;
+#endif
+
+ default:
+ /* The alignment of the build host
+ might be stricter than that of the
+ target, so be careful. We store in
+ network byte order. */
+ r_mem[0] = (sym_addr >> 24) & 0xff;
+ r_mem[1] = (sym_addr >> 16) & 0xff;
+ r_mem[2] = (sym_addr >> 8) & 0xff;
+ r_mem[3] = sym_addr & 0xff;
+ }
+#endif /* !TARGET_arm */
+ }
+
+#ifdef TARGET_bfin
+ else {
+ if ((*p)->howto->type == R_rimm16
+ || (*p)->howto->type == R_huimm16
+ || (*p)->howto->type == R_luimm16)
+ {
+ /* for l and h we set the lower 16 bits which is only when it will be used */
+ *((unsigned short *) (sectionp + q->address)) = (unsigned short) sym_addr;
+ } else if ((*p)->howto->type == R_byte4_data) {
+ *((uint32_t *)(sectionp + q->address)) = sym_addr;
+ }
+ }
+#endif
+ if (verbose)
+ printf(" RELOC[%d]: offset=0x%x symbol=%s%s "
+ "section=%s size=%d "
+ "fixup=0x%x (reloc=0x%x)\n", flat_reloc_count,
+ q->address, sym_name, addstr,
+ section_name, sym_reloc_size,
+ sym_addr, section_vma + q->address);
+
+ /*
+ * Create relocation entry (PC relative doesn't need this).
+ */
+ if (relocation_needed) {
+#ifndef TARGET_bfin
+ flat_relocs = realloc(flat_relocs,
+ (flat_reloc_count + 1) * sizeof(uint32_t));
+#ifndef TARGET_e1
+ flat_relocs[flat_reloc_count] = pflags |
+ (section_vma + q->address);
+
+ if (verbose)
+ printf("reloc[%d] = 0x%x\n", flat_reloc_count,
+ section_vma + q->address);
+#else
+ switch ((*p)->howto->type) {
+ case R_E1_CONST31:
+ case R_E1_CONST31_PCREL:
+ case R_E1_DIS29W_PCREL:
+ case R_E1_DIS29W:
+ case R_E1_DIS29H:
+ case R_E1_DIS29B:
+ case R_E1_IMM32_PCREL:
+ case R_E1_IMM32:
+ flat_relocs[flat_reloc_count] = pflags |
+ (section_vma + q->address + OPCODE_SIZE);
+ if (verbose)
+ printf("RELOCATION TABLE : reloc[%d] = [0x%x]\n", flat_reloc_count,
+ flat_relocs[flat_reloc_count] );
+ break;
+ case R_E1_WORD:
+ flat_relocs[flat_reloc_count] = pflags |
+ (section_vma + q->address);
+ if (verbose)
+ printf("RELOCATION TABLE : reloc[%d] = [0x%x]\n", flat_reloc_count,
+ flat_relocs[flat_reloc_count] );
+ break;
+ }
+#endif
+ flat_reloc_count++;
+#endif
+ relocation_needed = 0;
+ pflags = 0;
+ }
+
+#if 0
+printf("%s(%d): symbol name=%s address=0x%x section=%s -> RELOC=0x%x\n",
+ __FILE__, __LINE__, sym_name, q->address, section_name,
+ flat_relocs[flat_reloc_count]);
+#endif
+ }
+ }
+ }
+
+ if (bad_relocs) {
+ printf("%d bad relocs\n", bad_relocs);
+ exit(1);
+ }
+
+ if (rc < 0)
+ return(0);
+
+ *n_relocs = flat_reloc_count;
+ return flat_relocs;
+}
+
+
+
+static char * program;
+
+static void usage(void)
+{
+ fprintf(stderr, "Usage: %s [vrzd] [-p <abs-pic-file>] [-s stack-size] "
+ "[-o <output-file>] <elf-file>\n\n"
+ " -v : verbose operation\n"
+ " -r : force load to RAM\n"
+ " -k : enable kernel trace on load (for debug)\n"
+ " -z : compress code/data/relocs\n"
+ " -d : compress data/relocs\n"
+ " -a : use existing symbol references\n"
+ " instead of recalculating from\n"
+ " relocation info\n"
+ " -R reloc-file : read relocations from a separate file\n"
+ " -p abs-pic-file : GOT/PIC processing with files\n"
+ " -s stacksize : set application stack size\n"
+ " -o output-file : output file name\n\n",
+ program);
+ fprintf(stderr, "Compiled for " ARCH " architecture\n\n");
+ exit(2);
+}
+
+
+/* Write NUM zeroes to STREAM. */
+static void write_zeroes (unsigned long num, FILE *stream)
+{
+ char zeroes[1024];
+ if (num > 0) {
+ /* It'd be nice if we could just use fseek, but that doesn't seem to
+ work for stdio output files. */
+ memset(zeroes, 0x00, 1024);
+ while (num > sizeof(zeroes)) {
+ fwrite(zeroes, sizeof(zeroes), 1, stream);
+ num -= sizeof(zeroes);
+ }
+ if (num > 0)
+ fwrite(zeroes, num, 1, stream);
+ }
+}
+
+
+int main(int argc, char *argv[])
+{
+ int fd;
+ bfd *rel_bfd, *abs_bfd;
+ asection *s;
+ char *ofile=NULL, *pfile=NULL, *abs_file = NULL, *rel_file = NULL;
+ char *fname = NULL;
+ int opt;
+ int i;
+ int stack;
+ char cmd[1024];
+ FILE *gf = NULL;
+
+ asymbol **symbol_table;
+ long number_of_symbols;
+
+ unsigned long data_len = 0;
+ unsigned long bss_len = 0;
+ unsigned long text_len = 0;
+ unsigned long reloc_len;
+
+ unsigned long data_vma = ~0;
+ unsigned long bss_vma = ~0;
+ unsigned long text_vma = ~0;
+
+ unsigned long text_offs;
+
+ void *text;
+ void *data;
+ uint32_t *reloc;
+
+ struct flat_hdr hdr;
+
+ int gf_is_pipe = 0;
+
+ program = argv[0];
+ progname = argv[0];
+
+ if (argc < 2)
+ usage();
+
+ if (sizeof(hdr) != 64) {
+ fprintf(stderr,
+ "Potential flat header incompatibility detected\n"
+ "header size should be 64 but is %d\n",
+ sizeof(hdr));
+ exit(64);
+ }
+
+#ifndef TARGET_e1
+ stack = 4096;
+#else /* We need plenty of stack for both of them (Aggregate and Register) */
+ stack = 0x2020;
+#endif
+
+ while ((opt = getopt(argc, argv, "avzdrkp:s:o:R:")) != -1) {
+ switch (opt) {
+ case 'v':
+ verbose++;
+ break;
+ case 'r':
+ load_to_ram++;
+ break;
+ case 'k':
+ ktrace++;
+ break;
+ case 'z':
+ compress = 1;
+ break;
+ case 'd':
+ compress = 2;
+ break;
+ case 'p':
+ pfile = optarg;
+ break;
+ case 'o':
+ ofile = optarg;
+ break;
+ case 'a':
+ use_resolved = 1;
+ break;
+ case 's':
+ stack = atoi(optarg);
+ break;
+ case 'R':
+ rel_file = optarg;
+ break;
+ default:
+ fprintf(stderr, "%s Unknown option\n", argv[0]);
+ usage();
+ break;
+ }
+ }
+
+ /*
+ * if neither the -r or -p options was given, default to
+ * a RAM load as that is the only option that makes sense.
+ */
+ if (!load_to_ram && !pfile)
+ load_to_ram = 1;
+
+ filename = fname = argv[argc-1];
+
+ if (pfile) {
+ pic_with_got = 1;
+ abs_file = pfile;
+ } else
+ abs_file = fname;
+
+ if (! rel_file)
+ rel_file = fname;
+
+ if (!(rel_bfd = bfd_openr(rel_file, 0))) {
+ fprintf(stderr, "Can't open %s\n", rel_file);
+ exit(1);
+ }
+
+ if (bfd_check_format (rel_bfd, bfd_object) == 0) {
+ fprintf(stderr, "File is not an object file\n");
+ exit(2);
+ }
+
+ if (abs_file == rel_file)
+ abs_bfd = rel_bfd; /* one file does all */
+ else {
+ if (!(abs_bfd = bfd_openr(abs_file, 0))) {
+ fprintf(stderr, "Can't open %s\n", abs_file);
+ exit(1);
+ }
+
+ if (bfd_check_format (abs_bfd, bfd_object) == 0) {
+ fprintf(stderr, "File is not an object file\n");
+ exit(2);
+ }
+ }
+
+ if (! (bfd_get_file_flags(rel_bfd) & HAS_RELOC)) {
+ fprintf (stderr, "%s: Input file contains no relocation info\n", rel_file);
+ exit (2);
+ }
+
+ if (use_resolved && !(bfd_get_file_flags(abs_bfd) & EXEC_P)) {
+ /* `Absolute' file is not absolute, so neither are address
+ contained therein. */
+ fprintf (stderr,
+ "%s: `-a' option specified with non-fully-resolved input file\n",
+ bfd_get_filename (abs_bfd));
+ exit (2);
+ }
+
+ symbol_table = get_symbols(abs_bfd, &number_of_symbols);
+
+ /* Group output sections into text, data, and bss, and calc their sizes. */
+ for (s = abs_bfd->sections; s != NULL; s = s->next) {
+ unsigned long *vma, *len;
+ bfd_size_type sec_size;
+ bfd_vma sec_vma;
+
+ if (s->flags & SEC_CODE) {
+ vma = &text_vma;
+ len = &text_len;
+ } else if (s->flags & SEC_DATA) {
+ vma = &data_vma;
+ len = &data_len;
+ } else if (s->flags & SEC_ALLOC) {
+ vma = &bss_vma;
+ len = &bss_len;
+ } else
+ continue;
+
+ sec_size = bfd_section_size(abs_bfd, s);
+ sec_vma = bfd_section_vma(abs_bfd, s);
+
+ if (sec_vma < *vma) {
+ if (*len > 0)
+ *len += sec_vma - *vma;
+ else
+ *len = sec_size;
+ *vma = sec_vma;
+ } else if (sec_vma + sec_size > *vma + *len)
+ *len = sec_vma + sec_size - *vma;
+ }
+
+ if (text_len == 0) {
+ fprintf (stderr, "%s: no .text section", abs_file);
+ exit (2);
+ }
+
+ text = malloc(text_len);
+
+ if (verbose)
+ printf("TEXT -> vma=0x%x len=0x%x\n", text_vma, text_len);
+
+ /* Read in all text sections. */
+ for (s = abs_bfd->sections; s != NULL; s = s->next)
+ if (s->flags & SEC_CODE)
+ if (!bfd_get_section_contents(abs_bfd, s,
+ text + (s->vma - text_vma), 0,
+ bfd_section_size(abs_bfd, s)))
+ {
+ fprintf(stderr, "read error section %s\n", s->name);
+ exit(2);
+ }
+
+ if (data_len == 0) {
+ fprintf (stderr, "%s: no .data section", abs_file);
+ exit (2);
+ }
+ data = malloc(data_len);
+
+ if (verbose)
+ printf("DATA -> vma=0x%x len=0x%x\n", data_vma, data_len);
+
+ if ((text_vma + text_len) != data_vma) {
+ if ((text_vma + text_len) > data_vma) {
+ printf("ERROR: text=0x%x overlaps data=0x%x ?\n", text_len, data_vma);
+ exit(1);
+ }
+ if (verbose)
+ printf("WARNING: data=0x%x does not directly follow text=0x%x\n",
+ data_vma, text_len);
+ text_len = data_vma - text_vma;
+ }
+
+ /* Read in all data sections. */
+ for (s = abs_bfd->sections; s != NULL; s = s->next)
+ if (s->flags & SEC_DATA)
+ if (!bfd_get_section_contents(abs_bfd, s,
+ data + (s->vma - data_vma), 0,
+ bfd_section_size(abs_bfd, s)))
+ {
+ fprintf(stderr, "read error section %s\n", s->name);
+ exit(2);
+ }
+
+ /* Put common symbols in bss. */
+ bss_len += add_com_to_bss(symbol_table, number_of_symbols, bss_len);
+
+ if (verbose)
+ printf("BSS -> vma=0x%x len=0x%x\n", bss_vma, bss_len);
+
+ if ((data_vma + data_len) != bss_vma) {
+ if ((data_vma + data_len) > bss_vma) {
+ printf("ERROR: text=0x%x + data=0x%x overlaps bss=0x%x ?\n", text_len,
+ data_len, bss_vma);
+ exit(1);
+ }
+ if (verbose)
+ printf("WARNING: bss=0x%x does not directly follow text=0x%x + data=0x%x(0x%x)\n",
+ bss_vma, text_len, data_len, text_len + data_len);
+ data_len = bss_vma - data_vma;
+ }
+
+ reloc = output_relocs(abs_bfd, symbol_table, number_of_symbols, &reloc_len,
+ text, text_len, text_vma, data, data_len, data_vma,
+ rel_bfd);
+
+ if (reloc == NULL)
+ printf("No relocations in code!\n");
+
+ text_offs = real_address_bits(text_vma);
+
+ /* Fill in the binflt_flat header */
+ memcpy(hdr.magic,"bFLT",4);
+ hdr.rev = htonl(FLAT_VERSION);
+ hdr.entry = htonl(sizeof(hdr) + bfd_get_start_address(abs_bfd));
+ hdr.data_start = htonl(sizeof(hdr) + text_offs + text_len);
+ hdr.data_end = htonl(sizeof(hdr) + text_offs + text_len +data_len);
+ hdr.bss_end = htonl(sizeof(hdr) + text_offs + text_len +data_len+bss_len);
+ hdr.stack_size = htonl(stack); /* FIXME */
+ hdr.reloc_start = htonl(sizeof(hdr) + text_offs + text_len +data_len);
+ hdr.reloc_count = htonl(reloc_len);
+ hdr.flags = htonl(0
+ | (load_to_ram ? FLAT_FLAG_RAM : 0)
+ | (ktrace ? FLAT_FLAG_KTRACE : 0)
+ | (pic_with_got ? FLAT_FLAG_GOTPIC : 0)
+ | (compress ? (compress == 2 ? FLAT_FLAG_GZDATA : FLAT_FLAG_GZIP) : 0)
+ );
+ hdr.build_date = htonl((unsigned long)time(NULL));
+ memset(hdr.filler, 0x00, sizeof(hdr.filler));
+
+ for (i=0; i<reloc_len; i++) reloc[i] = htonl(reloc[i]);
+
+ if (verbose) {
+ printf("SIZE: .text=0x%04x, .data=0x%04x, .bss=0x%04x",
+ text_len, data_len, bss_len);
+ if (reloc)
+ printf(", relocs=0x%04x", reloc_len);
+ printf("\n");
+ }
+
+ if (!ofile) {
+ ofile = malloc(strlen(fname) + 5 + 1); /* 5 to add suffix */
+ strcpy(ofile, fname);
+ strcat(ofile, ".bflt");
+ }
+
+ if ((fd = open (ofile, O_WRONLY|O_BINARY|O_CREAT|O_TRUNC, 0744)) < 0) {
+ fprintf (stderr, "Can't open output file %s\n", ofile);
+ exit(4);
+ }
+
+ write(fd, &hdr, sizeof(hdr));
+ close(fd);
+
+ /*
+ * get the compression command ready
+ */
+ sprintf(cmd, "gzip -f -9 >> %s", ofile);
+
+#define START_COMPRESSOR do { \
+ if (gf) \
+ if (gf_is_pipe) \
+ pclose(gf); \
+ else \
+ fclose(gf); \
+ if (!(gf = popen(cmd, "w" BINARY_FILE_OPTS))) { \
+ fprintf(stderr, "Can't run cmd %s\n", cmd); \
+ exit(4); \
+ } \
+ gf_is_pipe = 1; \
+ } while (0)
+
+ gf = fopen(ofile, "ab"); /* Add 'b' to support non-posix (ie windows) */
+ if (!gf) {
+ fprintf(stderr, "Can't open file %s for writing\n", ofile); \
+ exit(4);
+ }
+
+ if (compress == 1)
+ START_COMPRESSOR;
+
+ /* Fill in any hole at the beginning of the text segment. */
+ if (verbose)
+ printf("ZERO before text len=0x%x\n", text_offs);
+ write_zeroes(text_offs, gf);
+
+ /* Write the text segment. */
+ fwrite(text, text_len, 1, gf);
+
+ if (compress == 2)
+ START_COMPRESSOR;
+
+ /* Write the data segment. */
+ fwrite(data, data_len, 1, gf);
+
+ if (reloc)
+ fwrite(reloc, reloc_len * 4, 1, gf);
+
+ if(gf_is_pipe)
+ pclose(gf);
+ else
+ fclose(gf);
+
+ exit(0);
+}
+
+
+/*
+ * this __MUST__ be at the VERY end of the file - do NOT move!!
+ *
+ * Local Variables:
+ * c-basic-offset: 4
+ * tab-width: 8
+ * end:
+ * vi: tabstop=8 shiftwidth=4 textwidth=79 noexpandtab
+ */
--- /dev/null
+
+ENTRY (_start)
+
+MEMORY {
+ flatmem : ORIGIN = 0x0, LENGTH = 0xfffffff
+}
+
+SECTIONS {
+
+ .text 0x0 : {
+ . = . + 4;
+ . = ALIGN(0x4) ;
+ _stext = . ;
+ *(.text)
+ *(.text.*)
+ *(.gnu.warning)
+ *(.stub)
+ *(.gnu.linkonce.t*)
+ *(.glue_7t)
+ *(.glue_7)
+ *(.jcr)
+ *(.init)
+ *(.fini)
+
+W_RODAT *(.rodata)
+W_RODAT *(.rodata1)
+W_RODAT *(.rodata.*)
+W_RODAT *(.gnu.linkonce.r*)
+
+ /* This is special code area at the end of the normal
+ text section. It contains a small lookup table at
+ the start followed by the code pointed to by entries
+ in the lookup table. */
+ . = ALIGN (4) ;
+ PROVIDE(__ctbp = .);
+ *(.call_table_data)
+ *(.call_table_text)
+
+ . = ALIGN(0x20) ;
+ _etext = . ;
+ } > flatmem
+
+ .data : {
+ . = ALIGN(0x4) ;
+ _sdata = . ;
+ __data_start = . ;
+ data_start = . ;
+ *(.got.plt)
+ *(.got)
+ FILL(0) ;
+ . = ALIGN(0x20) ;
+ LONG(-1)
+ . = ALIGN(0x20) ;
+R_RODAT *(.rodata)
+R_RODAT *(.rodata1)
+R_RODAT *(.rodata.*)
+R_RODAT *(.gnu.linkonce.r*)
+ *(.data)
+ *(.data1)
+ *(.data.*)
+ *(.gnu.linkonce.d*)
+ *(.data1)
+ *(.eh_frame)
+ *(.gcc_except_table)
+
+ /* Microblaze has .sdata and .sbss (small bss). They must
+ be contiguous, so please don't move any of this. JW */
+ _ssrw = . ;
+ *(.sdata)
+ *(.sdata.*)
+ *(.sbss) /* Don't move this! */
+ _essrw = . ;
+
+ _ssrw_size = _essrw - _ssrw;
+ PROVIDE(_SDA_BASE_ = _ssrw + (_ssrw_size / 2));
+
+ *(.gnu.linkonce.s.*)
+ *(__libc_atexit)
+ *(__libc_subinit)
+ *(__libc_subfreeres)
+ *(.note.ABI-tag)
+
+ /* microblaze-specific read-only small data area
+ and associated locating symbols */
+ _ssro = . ;
+ *(.sdata2)
+ _essro = . ;
+ _ssro_size = _essro - _ssro;
+ PROVIDE(_SDA2_BASE_ = _ssro + (_ssro_size / 2));
+
+ . = ALIGN(4) ;
+ __CTOR_LIST__ = .;
+ LONG((__CTOR_END__ - __CTOR_LIST__) / 4 - 2)
+SINGLE_LINK: /* gcc uses crtbegin.o to find the start of
+SINGLE_LINK: the constructors, so we make sure it is
+SINGLE_LINK: first. Because this is a wildcard, it
+SINGLE_LINK: doesn't matter if the user does not
+SINGLE_LINK: actually link against crtbegin.o; the
+SINGLE_LINK: linker won't look for a file to match a
+SINGLE_LINK: wildcard. The wildcard also means that it
+SINGLE_LINK: doesn't matter which directory crtbegin.o
+SINGLE_LINK: is in. */
+SINGLE_LINK: KEEP (*crtbegin*.o(.ctors))
+SINGLE_LINK: /* We don't want to include the .ctor section from
+SINGLE_LINK: from the crtend.o file until after the sorted ctors.
+SINGLE_LINK: The .ctor section from the crtend file contains the
+SINGLE_LINK: end of ctors marker and it must be last */
+SINGLE_LINK: KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
+SINGLE_LINK: KEEP (*(SORT(.ctors.*)))
+ KEEP (*(.ctors))
+ LONG(0)
+ __CTOR_END__ = .;
+ __DTOR_LIST__ = .;
+ LONG((__DTOR_END__ - __DTOR_LIST__) / 4 - 2)
+SINGLE_LINK: KEEP (*crtbegin*.o(.dtors))
+SINGLE_LINK: KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
+SINGLE_LINK: KEEP (*(SORT(.dtors.*)))
+ KEEP (*(.dtors))
+ LONG(0)
+ __DTOR_END__ = .;
+
+ PROVIDE (__preinit_array_start = .);
+ KEEP (*(.preinit_array))
+ PROVIDE (__preinit_array_end = .);
+
+ PROVIDE (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array))
+ PROVIDE (__init_array_end = .);
+
+ PROVIDE (__fini_array_start = .);
+ KEEP (*(.fini_array))
+ KEEP (*(SORT(.fini_array.*)))
+ PROVIDE (__fini_array_end = .);
+
+ . = ALIGN(0x10) ;
+ _edata = . ;
+ } > flatmem
+
+ .bss : {
+ . = ALIGN(0x4) ;
+ _sbss = ALIGN(0x4) ;
+ __bss_start = . ;
+ *(.dynsbss)
+ *(.sbss)
+ *(.sbss.*)
+ *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(.bss.*)
+ *(.bss*)
+ *(.gnu.linkonce.b*)
+ *(COMMON)
+ . = ALIGN(0x10) ;
+ _ebss = . ;
+ _end = . ;
+ end = . ;
+ } > flatmem
+
+ .stack : {
+ . = ALIGN(0x4);
+ __stack_start = .;
+ }
+
+ .junk 0 : { *(.rel*) *(.rela*) }
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+}
--- /dev/null
+/*
+ * Copyright (C) 2002-2005 David McCullough <davidm@snapgear.com>
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
+ * The Silver Hammer Group, Ltd.
+ *
+ * This file provides the definitions and structures needed to
+ * support uClinux flat-format executables.
+ *
+ * This is Free Software, under the GNU Public Licence v2 or greater.
+ *
+ */
+
+#ifndef _LINUX_FLAT_H
+#define _LINUX_FLAT_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#include <asm/flat.h>
+#endif
+
+#define FLAT_VERSION 0x00000004L
+
+#ifdef CONFIG_BINFMT_SHARED_FLAT
+#define MAX_SHARED_LIBS (4)
+#else
+#define MAX_SHARED_LIBS (1)
+#endif
+
+/*
+ * To make everything easier to port and manage cross platform
+ * development, all fields are in network byte order.
+ */
+
+struct flat_hdr {
+ char magic[4];
+ uint32_t rev; /* version (as above) */
+ uint32_t entry; /* Offset of first executable instruction
+ with text segment from beginning of file */
+ uint32_t data_start; /* Offset of data segment from beginning of
+ file */
+ uint32_t data_end; /* Offset of end of data segment from beginning
+ of file */
+ uint32_t bss_end; /* Offset of end of bss segment from beginning
+ of file */
+
+ /* (It is assumed that data_end through bss_end forms the bss segment.) */
+
+ uint32_t stack_size; /* Size of stack, in bytes */
+ uint32_t reloc_start; /* Offset of relocation records from beginning
+ of file */
+ uint32_t reloc_count; /* Number of relocation records */
+ uint32_t flags;
+ uint32_t build_date; /* When the program/library was built */
+ uint32_t filler[5]; /* Reservered, set to zero */
+};
+
+#define FLAT_FLAG_RAM 0x0001 /* load program entirely into RAM */
+#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */
+#define FLAT_FLAG_GZIP 0x0004 /* all but the header is compressed */
+#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */
+#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */
+
+#ifdef __KERNEL__ /* so systems without linux headers can compile the apps */
+/*
+ * While it would be nice to keep this header clean, users of older
+ * tools still need this support in the kernel. So this section is
+ * purely for compatibility with old tool chains.
+ *
+ * DO NOT make changes or enhancements to the old format please, just work
+ * with the format above, except to fix bugs with old format support.
+ */
+
+#include <asm/byteorder.h>
+
+#define OLD_FLAT_VERSION 0x00000002L
+#define OLD_FLAT_RELOC_TYPE_TEXT 0
+#define OLD_FLAT_RELOC_TYPE_DATA 1
+#define OLD_FLAT_RELOC_TYPE_BSS 2
+
+typedef union {
+ uint32_t value;
+ struct {
+# if defined(mc68000) && !defined(CONFIG_COLDFIRE)
+ int32_t offset : 30;
+ uint32_t type : 2;
+# define OLD_FLAT_FLAG_RAM 0x1 /* load program entirely into RAM */
+# elif defined(__BIG_ENDIAN_BITFIELD)
+ uint32_t type : 2;
+ int32_t offset : 30;
+# define OLD_FLAT_FLAG_RAM 0x1 /* load program entirely into RAM */
+# elif defined(__LITTLE_ENDIAN_BITFIELD)
+ int32_t offset : 30;
+ uint32_t type : 2;
+# define OLD_FLAT_FLAG_RAM 0x1 /* load program entirely into RAM */
+# else
+# error "Unknown bitfield order for flat files."
+# endif
+ } reloc;
+} flat_v2_reloc_t;
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_FLAT_H */
+
+/* this __MUST__ be at the VERY end of the file - do NOT move!!
+ * Local Variables:
+ * c-basic-offset: 4
+ * tab-width: 8
+ * end:
+ * vi: tabstop=8 shiftwidth=4 textwidth=79 noexpandtab
+ */
--- /dev/null
+/****************************************************************************/
+/*
+ * A simple program to manipulate flat files
+ *
+ * Copyright (C) 2001-2003 SnapGear Inc, davidm@snapgear.com
+ * Copyright (C) 2001 Lineo, davidm@lineo.com
+ *
+ * This is Free Software, under the GNU Public Licence v2 or greater.
+ *
+ */
+/****************************************************************************/
+
+#include <stdio.h> /* Userland pieces of the ANSI C standard I/O package */
+#include <unistd.h> /* Userland prototypes of the Unix std system calls */
+#include <time.h>
+#include <stdlib.h> /* exit() */
+#include <string.h> /* strcat(), strcpy() */
+
+/* macros for conversion between host and (internet) network byte order */
+#ifndef WIN32
+#include <netinet/in.h> /* Consts and structs defined by the internet system */
+#define BINARY_FILE_OPTS
+#else
+#include <winsock2.h>
+#define BINARY_FILE_OPTS "b"
+#endif
+
+/* from uClinux-x.x.x/include/linux */
+#include "flat.h" /* Binary flat header description */
+
+#if defined(__MINGW32__)
+#include <getopt.h>
+
+#define mkstemp(p) mktemp(p)
+
+#endif
+
+/****************************************************************************/
+
+char *program_name;
+
+static char cmd[1024];
+static int print = 0, compress = 0, ramload = 0, stacksize = 0, ktrace = 0;
+static int short_format = 0;
+
+/****************************************************************************/
+
+void
+transferr(FILE *ifp, FILE *ofp, int count)
+{
+ int n, num;
+
+ while (count == -1 || count > 0) {
+ if (count == -1 || count > sizeof(cmd))
+ num = sizeof(cmd);
+ else
+ num = count;
+ n = fread(cmd, 1, num, ifp);
+ if (n == 0)
+ break;
+ if (fwrite(cmd, n, 1, ofp) != 1) {
+ fprintf(stderr, "Write failed :-(\n");
+ exit(1);
+ }
+ if (count != -1)
+ count -= n;
+ }
+ if (count > 0) {
+ fprintf(stderr, "Failed to transferr %d bytes\n", count);
+ exit(1);
+ }
+}
+
+/****************************************************************************/
+
+void
+process_file(char *ifile, char *ofile)
+{
+ int old_flags, old_stack, new_flags, new_stack;
+ FILE *ifp, *ofp;
+ int ofp_is_pipe = 0;
+ struct flat_hdr old_hdr, new_hdr;
+ char tfile[256];
+ char tfile2[256];
+
+ *tfile = *tfile2 = '\0';
+
+ if ((ifp = fopen(ifile, "r" BINARY_FILE_OPTS)) == NULL) {
+ fprintf(stderr, "Cannot open %s\n", ifile);
+ return;
+ }
+
+ if (fread(&old_hdr, sizeof(old_hdr), 1, ifp) != 1) {
+ fprintf(stderr, "Cannot read header of %s\n", ifile);
+ return;
+ }
+
+ if (strncmp(old_hdr.magic, "bFLT", 4) != 0) {
+ fprintf(stderr, "Cannot read header of %s\n", ifile);
+ return;
+ }
+
+ new_flags = old_flags = ntohl(old_hdr.flags);
+ new_stack = old_stack = ntohl(old_hdr.stack_size);
+ new_hdr = old_hdr;
+
+ if (compress == 1) {
+ new_flags |= FLAT_FLAG_GZIP;
+ new_flags &= ~FLAT_FLAG_GZDATA;
+ } else if (compress == 2) {
+ new_flags |= FLAT_FLAG_GZDATA;
+ new_flags &= ~FLAT_FLAG_GZIP;
+ } else if (compress < 0)
+ new_flags &= ~(FLAT_FLAG_GZIP|FLAT_FLAG_GZDATA);
+
+ if (ramload > 0)
+ new_flags |= FLAT_FLAG_RAM;
+ else if (ramload < 0)
+ new_flags &= ~FLAT_FLAG_RAM;
+
+ if (ktrace > 0)
+ new_flags |= FLAT_FLAG_KTRACE;
+ else if (ktrace < 0)
+ new_flags &= ~FLAT_FLAG_KTRACE;
+
+ if (stacksize)
+ new_stack = stacksize;
+
+ if (print == 1) {
+ time_t t;
+
+ printf("%s\n", ifile);
+ printf(" Magic: %4.4s\n", old_hdr.magic);
+ printf(" Rev: %d\n", ntohl(old_hdr.rev));
+ t = (time_t) htonl(old_hdr.build_date);
+ printf(" Build Date: %s", t?ctime(&t):"not specified\n");
+ printf(" Entry: 0x%x\n", ntohl(old_hdr.entry));
+ printf(" Data Start: 0x%x\n", ntohl(old_hdr.data_start));
+ printf(" Data End: 0x%x\n", ntohl(old_hdr.data_end));
+ printf(" BSS End: 0x%x\n", ntohl(old_hdr.bss_end));
+ printf(" Stack Size: 0x%x\n", ntohl(old_hdr.stack_size));
+ printf(" Reloc Start: 0x%x\n", ntohl(old_hdr.reloc_start));
+ printf(" Reloc Count: 0x%x\n", ntohl(old_hdr.reloc_count));
+ printf(" Flags: 0x%x ( ", ntohl(old_hdr.flags));
+ if (old_flags) {
+ if (old_flags & FLAT_FLAG_RAM)
+ printf("Load-to-Ram ");
+ if (old_flags & FLAT_FLAG_GOTPIC)
+ printf("Has-PIC-GOT ");
+ if (old_flags & FLAT_FLAG_GZIP)
+ printf("Gzip-Compressed ");
+ if (old_flags & FLAT_FLAG_GZDATA)
+ printf("Gzip-Data-Compressed ");
+ if (old_flags & FLAT_FLAG_KTRACE)
+ printf("Kernel-Traced-Load ");
+ printf(")\n");
+ }
+ } else if (print > 1) {
+ static int first = 1;
+ unsigned int text, data, bss, stk, rel, tot;
+
+ if (first) {
+ printf("Flag Rev Text Data BSS Stack Relocs RAM Filename\n");
+ printf("-----------------------------------------------------------\n");
+ first = 0;
+ }
+ *tfile = '\0';
+ strcat(tfile, (old_flags & FLAT_FLAG_KTRACE) ? "k" : "");
+ strcat(tfile, (old_flags & FLAT_FLAG_RAM) ? "r" : "");
+ strcat(tfile, (old_flags & FLAT_FLAG_GOTPIC) ? "p" : "");
+ strcat(tfile, (old_flags & FLAT_FLAG_GZIP) ? "z" :
+ ((old_flags & FLAT_FLAG_GZDATA) ? "d" : ""));
+ printf("-%-3.3s ", tfile);
+ printf("%3d ", ntohl(old_hdr.rev));
+ printf("%6d ", text=ntohl(old_hdr.data_start)-sizeof(struct flat_hdr));
+ printf("%6d ", data=ntohl(old_hdr.data_end)-ntohl(old_hdr.data_start));
+ printf("%6d ", bss=ntohl(old_hdr.bss_end)-ntohl(old_hdr.data_end));
+ printf("%6d ", stk=ntohl(old_hdr.stack_size));
+ printf("%6d ", rel=ntohl(old_hdr.reloc_count) * 4);
+ /*
+ * work out how much RAM is needed per invocation, this
+ * calculation is dependent on the binfmt_flat implementation
+ */
+ tot = data; /* always need data */
+
+ if (old_flags & (FLAT_FLAG_RAM|FLAT_FLAG_GZIP))
+ tot += text + sizeof(struct flat_hdr);
+
+ if (bss + stk > rel) /* which is bigger ? */
+ tot += bss + stk;
+ else
+ tot += rel;
+
+ printf("%6d ", tot);
+ /*
+ * the total depends on whether the relocs are smaller/bigger than
+ * the BSS
+ */
+ printf("%s\n", ifile);
+ }
+
+ /* if there is nothing else to do, leave */
+ if (new_flags == old_flags && new_stack == old_stack)
+ return;
+
+ new_hdr.flags = htonl(new_flags);
+ new_hdr.stack_size = htonl(new_stack);
+
+ strcpy(tfile, "/tmp/flatXXXXXX");
+ mkstemp(tfile);
+ if ((ofp = fopen(tfile, "w" BINARY_FILE_OPTS)) == NULL) {
+ fprintf(stderr, "Failed to open %s for writing\n", tfile);
+ unlink(tfile);
+ unlink(tfile2);
+ exit(1);
+ }
+
+ if (fwrite(&new_hdr, sizeof(new_hdr), 1, ofp) != 1) {
+ fprintf(stderr, "Failed to write to %s\n", tfile);
+ unlink(tfile);
+ unlink(tfile2);
+ exit(1);
+ }
+
+ /*
+ * get ourselves a fully uncompressed copy of the text/data/relocs
+ * so that we can manipulate it more easily
+ */
+ if (old_flags & (FLAT_FLAG_GZIP|FLAT_FLAG_GZDATA)) {
+ FILE *tfp;
+
+ strcpy(tfile2, "/tmp/flat2XXXXXX");
+ mkstemp(tfile2);
+
+ if (old_flags & FLAT_FLAG_GZDATA) {
+ tfp = fopen(tfile2, "w" BINARY_FILE_OPTS);
+ if (!tfp) {
+ fprintf(stderr, "Failed to open %s for writing\n", tfile2);
+ exit(1);
+ }
+ transferr(ifp, tfp, ntohl(old_hdr.data_start) -
+ sizeof(struct flat_hdr));
+ fclose(tfp);
+ }
+
+ sprintf(cmd, "gunzip >> %s", tfile2);
+ tfp = popen(cmd, "w" BINARY_FILE_OPTS);
+ if(!tfp) {
+ perror("popen");
+ exit(1);
+ }
+ transferr(ifp, tfp, -1);
+ pclose(tfp);
+
+ fclose(ifp);
+ ifp = fopen(tfile2, "r" BINARY_FILE_OPTS);
+ if (!ifp) {
+ fprintf(stderr, "Failed to open %s for reading\n", tfile2);
+ unlink(tfile);
+ unlink(tfile2);
+ exit(1);
+ }
+ }
+
+ if (new_flags & FLAT_FLAG_GZIP) {
+ printf("zflat %s --> %s\n", ifile, ofile);
+ fclose(ofp);
+ sprintf(cmd, "gzip -9 -f >> %s", tfile);
+ ofp = popen(cmd, "w" BINARY_FILE_OPTS);
+ ofp_is_pipe = 1;
+ } else if (new_flags & FLAT_FLAG_GZDATA) {
+ printf("zflat-data %s --> %s\n", ifile, ofile);
+ transferr(ifp, ofp, ntohl(new_hdr.data_start) -
+ sizeof(struct flat_hdr));
+ fclose(ofp);
+ sprintf(cmd, "gzip -9 -f >> %s", tfile);
+ ofp = popen(cmd, "w" BINARY_FILE_OPTS);
+ ofp_is_pipe = 1;
+ }
+
+ if (!ofp) { /* can only happen if using gzip/gunzip */
+ fprintf(stderr, "Can't run cmd %s\n", cmd);
+ unlink(tfile);
+ unlink(tfile2);
+ exit(1);
+ }
+
+ transferr(ifp, ofp, -1);
+
+ if (ferror(ifp) || ferror(ofp)) {
+ fprintf(stderr, "Error on file pointer%s%s\n",
+ ferror(ifp) ? " input" : "", ferror(ofp) ? " output" : "");
+ unlink(tfile);
+ unlink(tfile2);
+ exit(1);
+ }
+
+ fclose(ifp);
+ if (ofp_is_pipe)
+ pclose(ofp);
+ else
+ fclose(ofp);
+
+ /* cheat a little here to preserve file permissions */
+ sprintf(cmd, "cp %s %s", tfile, ofile);
+ system(cmd);
+ unlink(tfile);
+ unlink(tfile2);
+}
+
+/****************************************************************************/
+
+void
+usage(char *s)
+{
+ if (s)
+ fprintf(stderr, "%s\n", s);
+ fprintf(stderr, "usage: %s [options] flat-file\n", program_name);
+ fprintf(stderr, " Allows you to change an existing flat file\n\n");
+ fprintf(stderr, " -p : print current settings\n");
+ fprintf(stderr, " -z : compressed flat file\n");
+ fprintf(stderr, " -d : compressed data-only flat file\n");
+ fprintf(stderr, " -Z : un-compressed flat file\n");
+ fprintf(stderr, " -r : ram load\n");
+ fprintf(stderr, " -R : do not RAM load\n");
+ fprintf(stderr, " -k : kernel traced load (for debug)\n");
+ fprintf(stderr, " -K : normal non-kernel traced load\n");
+ fprintf(stderr, " -s size : stack size\n");
+ fprintf(stderr, " -o file : output-file\n"
+ " (default is to modify input file)\n");
+ exit(1);
+}
+
+/****************************************************************************/
+
+int
+main(int argc, char *argv[])
+{
+ int c;
+ char *ofile = NULL, *ifile;
+
+ program_name = argv[0];
+
+ while ((c = getopt(argc, argv, "pdzZrRkKs:o:")) != EOF) {
+ switch (c) {
+ case 'p': print = 1; break;
+ case 'z': compress = 1; break;
+ case 'd': compress = 2; break;
+ case 'Z': compress = -1; break;
+ case 'r': ramload = 1; break;
+ case 'R': ramload = -1; break;
+ case 'k': ktrace = 1; break;
+ case 'K': ktrace = -1; break;
+ case 's': stacksize = atoi(optarg); break;
+ case 'o': ofile = optarg; break;
+ default:
+ usage("invalid option");
+ break;
+ }
+ }
+
+ if (optind >= argc)
+ usage("No input files provided");
+
+ if (ofile && argc - optind > 1)
+ usage("-o can only be used with a single file");
+
+ if (!print && !compress && !ramload && !stacksize) /* no args == print */
+ print = argc - optind; /* greater than 1 is short format */
+
+ for (c = optind; c < argc; c++) {
+ ifile = argv[c];
+ if (!ofile)
+ ofile = ifile;
+ process_file(ifile, ofile);
+ ofile = NULL;
+ }
+
+ exit(0);
+}
+
+/****************************************************************************/
--- /dev/null
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission. M.I.T. makes no representations about the
+# suitability of this software for any purpose. It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch. It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+ case $1 in
+ -c) instcmd="$cpprog"
+ shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd="$stripprog"
+ shift
+ continue;;
+
+ -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+ shift
+ continue;;
+
+ -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+ shift
+ continue;;
+
+ *) if [ x"$src" = x ]
+ then
+ src=$1
+ else
+ # this colon is to work around a 386BSD /bin/sh bug
+ :
+ dst=$1
+ fi
+ shift
+ continue;;
+ esac
+done
+
+if [ x"$src" = x ]
+then
+ echo "install: no input file specified"
+ exit 1
+else
+ :
+fi
+
+if [ x"$dir_arg" != x ]; then
+ dst=$src
+ src=""
+
+ if [ -d $dst ]; then
+ instcmd=:
+ chmodcmd=""
+ else
+ instcmd=$mkdirprog
+ fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad
+# if $src (and thus $dsttmp) contains '*'.
+
+ if [ -f $src -o -d $src ]
+ then
+ :
+ else
+ echo "install: $src does not exist"
+ exit 1
+ fi
+
+ if [ x"$dst" = x ]
+ then
+ echo "install: no destination specified"
+ exit 1
+ else
+ :
+ fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+ if [ -d $dst ]
+ then
+ dst="$dst"/`basename $src`
+ else
+ :
+ fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+# this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+ '
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+ pathcomp="${pathcomp}${1}"
+ shift
+
+ if [ ! -d "${pathcomp}" ] ;
+ then
+ $mkdirprog "${pathcomp}"
+ else
+ :
+ fi
+
+ pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+ $doit $instcmd $dst &&
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+ if [ x"$transformarg" = x ]
+ then
+ dstfile=`basename $dst`
+ else
+ dstfile=`basename $dst $transformbasename |
+ sed $transformarg`$transformbasename
+ fi
+
+# don't allow the sed command to completely eliminate the filename
+
+ if [ x"$dstfile" = x ]
+ then
+ dstfile=`basename $dst`
+ else
+ :
+ fi
+
+# Make a temp file name in the proper directory.
+
+ dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+ $doit $instcmd $src $dsttmp &&
+
+ trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing. If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi &&
+
+# Now rename the file to the real destination.
+
+ $doit $rmcmd -f $dstdir/$dstfile &&
+ $doit $mvcmd $dsttmp $dstdir/$dstfile
+
+fi &&
+
+
+exit 0
--- /dev/null
+#!/bin/sh
+#
+# allow us to do flat processing if the flag -Wl,-elf2flt or -elf2flt to
+# the 'C' compiler or linker respectively
+#
+# uses the env. var FLTFLAGS as extra parameters to pass to elf2flt
+# arguments given like -Wl,-elf2flt="-b 10000 -v" are given before FLTFLAGS
+#
+# Copyright (C) 2002,2003 David McCullough <davidm@snapgear.com>
+# Copyright (C) 2000, Lineo. davidm@lineo.com
+#
+# This is Free Software, under the GNU Public Licence v2 or greater.
+#
+
+LINKER="$0.real" # the original renamed-linker
+ELF2FLT="`expr $0 : '\(.*\)ld'`elf2flt"
+NM="`expr $0 : '\(.*\)ld'`nm"
+TOOLDIR="`dirname $0`" # let gcc find the tools for us
+OBJCOPY="`expr $0 : '\(.*\)ld'`objcopy"
+[ -f "$OBJCOPY" ] || OBJCOPY="$TOOLDIR/../../bin/@target_alias@-objcopy"
+OBJDUMP="`expr $OBJCOPY : '\(.*\)objcopy'`objdump"
+LDSCRIPTPATH="@binutils_ldscript_dir@" # and the scripts
+SHARED_ID=""
+NEWLDSCRIPT=""
+
+# check TOOLDIR from prefix/bin/ or prefix/target-alias/bin/
+[ -d "${LDSCRIPTPATH}" ] || LDSCRIPTPATH="${TOOLDIR}/../lib"
+
+#
+# if we have the elf2flt options, run it
+#
+
+if expr "$*" : ".*-elf2flt.*" > /dev/null
+then
+ ARG1=
+ ARG2=
+ OFILE="a.out"
+ PIC=
+ SDIRS=
+ LDSCRIPT=
+ FINAL="yes"
+ FINAL_ONLY=
+ MOVDAT=
+ VERBOSE=
+
+ while [ $# -ne 0 ]
+ do
+ case "$1" in
+
+ -elf2flt) ;; # we already know this
+ -elf2flt*)FLTFLAGS="`expr \"$1\" : '-elf2flt=\(.*\)'` $FLTFLAGS";;
+
+ -move-rodata)
+ MOVDAT="y";; # Put rodata in ROM if possible
+
+ -shared-lib-id)
+ shift; SHARED_ID="$1";; # Shared library ID
+
+ -o) shift; OFILE="$1";; # the final outfile
+ -o*) OFILE="`expr \"$1\" : '-o\(.*\)'`";;
+
+ -T) shift; LDSCRIPT="$1";; # they have a linker script
+ -c) shift; LDSCRIPT="$1";;
+
+ -L) ARG1="$ARG1 $1" # remember search dirs
+ shift;
+ ARG1="$ARG1 $1"
+ SDIRS="$SDIRS -L$1"
+ ;;
+ -L*) ARG1="$ARG1 $1"; SDIRS="$SDIRS $1";;
+
+ -EB) ARG1="$ARG1 $1"; SDIRS="$SDIRS $1";; # arm big endian
+
+ -relax) ;; # eat this for microblaze
+
+ -r|-Ur) FINAL="" # this is not a final link
+ ARG1="$ARG1 $1"
+ ;;
+
+ -v) ARG1="$ARG1 $1"
+ VERBOSE="y"
+ ;;
+
+ -m) shift; EMUL="-m $1";; # ld emulations for h8300
+ -m*) EMUL=$1;;
+
+ *) ARG1="$ARG1 $1"
+ ;;
+ esac
+ shift
+ done
+
+ if [ "$FINAL" = "yes" ]
+ then
+ [ "$VERBOSE" = "y" ] && set -x
+ ARG1="$ARG1 $FINAL_ONLY"
+ NEWLDSCRIPT=`mktemp /tmp/flt-XXXXXX`
+ SEDOP=" -e s/^R_RODAT// -e /^W_RODAT/d"
+ OBJCOPYOP=""
+ if [ "$MOVDAT" ]
+ then
+ $LINKER -r -d -o "$OFILE.elf2flt" $ARG1 || exit $?
+ if [ "`$OBJDUMP -h "$OFILE.elf2flt" | \
+ egrep -A1 '[.]rodata' | grep RELOC`" ]
+ then
+ echo "warning: .rodata section contains relocations"
+ else
+ SEDOP="-e /^R_RODAT/d -e s/^W_RODAT//"
+ fi
+ fi
+ if [ "$SHARED_ID" ]
+ then
+ # Massage the linker script into something useful. These
+ # regexps are ugly due to some bizzare shell quoting rules.
+ # SEDOP="$SEDOP -e \"s/ORIGIN = 0x0,/ORIGIN = 0x${SHARED_ID}000000,/\""
+ # SEDOP="$SEDOP -e \"s/.text 0x0 :/.text 0x${SHARED_ID}000000 :/\""
+ SEDOP="$SEDOP -e s/\\(ORIGIN.=.0\\)x0,/\\1x${SHARED_ID}000000,/"
+ SEDOP="$SEDOP -e s/\\([.]text.0\\)x0[^0-9]:/\\1x${SHARED_ID}000000:/"
+
+ if [ "$SHARED_ID" -gt 0 ]
+ then
+ # Non application modules enter via main not _start
+ # SEDOP="$SEDOP -e 's/ENTRY (_start)/ENTRY (main)/'"
+ SEDOP="$SEDOP -e s/\\(ENTRY.\\)(_start)/\1(lib_main)/"
+ OBJCOPYOP="--localize-hidden --weaken"
+ fi
+
+ # Provide the magic parameter that defines the library data segment pointer offset
+ case "@target_cpu@" in
+ h8300) GOT_OFFSET="__current_shared_library_er5_offset_";;
+ *) GOT_OFFSET="_current_shared_library_a5_offset_";;
+ esac
+ ARG1="$ARG1 -defsym $GOT_OFFSET=`expr ${SHARED_ID} '*' -4 - 4`"
+ fi
+ if [ "@emit_relocs@" = "yes" ]
+ then
+ SEDOP="$SEDOP -e s/^SINGLE_LINK://"
+ else
+ SEDOP="$SEDOP -e /^SINGLE_LINK:/d"
+ fi
+
+ # provide a default linker script, we usually need one
+ [ -z "$LDSCRIPT" ] && LDSCRIPT="${LDSCRIPTPATH}/elf2flt.ld"
+
+ # if we can find the linker script we preprocess it, otherwise
+ # we assume the user knows what they are doing
+ if [ -f "$LDSCRIPT" ]; then
+ sed $SEDOP < "$LDSCRIPT" > "$NEWLDSCRIPT"
+ LDSCRIPT="$NEWLDSCRIPT"
+ elif [ -f "${LDSCRIPTPATH}/$LDSCRIPT" ]; then
+ sed $SEDOP < "${LDSCRIPTPATH}/$LDSCRIPT" > "$NEWLDSCRIPT"
+ LDSCRIPT="$NEWLDSCRIPT"
+ elif [ -f "${LDSCRIPTPATH}/ldscripts/$LDSCRIPT" ]; then
+ sed $SEDOP < "${LDSCRIPTPATH}/ldscripts/$LDSCRIPT" > "$NEWLDSCRIPT"
+ LDSCRIPT="$NEWLDSCRIPT"
+ fi
+
+ if [ "@emit_relocs@" = "yes" ]
+ then
+ $LINKER $EMUL $SDIRS -T $LDSCRIPT -q -o "$OFILE.gdb" $ARG1 ||exit $?
+ RFILE="$OFILE.gdb"
+ FLTFLAGS="$FLTFLAGS -a"
+ else
+ if [ "@got_check@" = "no" ]
+ then
+ $LINKER $EMUL $SDIRS -T $LDSCRIPT -Ur -d -o "$OFILE.elf" $ARG1 ||exit $?
+ $LINKER $EMUL $SDIRS -T $LDSCRIPT -o "$OFILE.gdb" $ARG1 ||exit $?
+ else
+ $LINKER $EMUL -r -d -o "$OFILE.elf2flt" $ARG1 ||exit $?
+ $LINKER $EMUL $SDIRS -T $LDSCRIPT -Ur -o "$OFILE.elf" "$OFILE.elf2flt" ||exit $?
+ $LINKER $EMUL $SDIRS -T $LDSCRIPT -o "$OFILE.gdb" "$OFILE.elf2flt" ||exit $?
+ rm -f "$OFILE.elf2flt"
+ fi
+ RFILE="$OFILE.elf"
+ fi
+ if $NM "$OFILE.gdb" | grep _GLOBAL_OFFSET_TABLE_ > /dev/null
+ then
+ $ELF2FLT $FLTFLAGS -o "$OFILE" -p "$OFILE.gdb" "$RFILE" || exit $?
+ else
+ $ELF2FLT $FLTFLAGS -o "$OFILE" -r "$RFILE" || exit $?
+ fi
+ if [ "$OBJCOPYOP" ]
+ then
+ if $OBJCOPY $OBJCOPYOP --help > /dev/null 2>&1
+ then
+ $OBJCOPY $OBJCOPYOP "$OFILE.gdb" ||exit $?
+ else
+ case " $OBJCOPYOP " in
+ *" --localize-hidden "*)
+ SYMS=`mktemp /tmp/flt-XXXXXX`
+ $OBJDUMP --syms "$OFILE.gdb" > "$SYMS" ||exit $?
+ sed -n 's/.*\(\.hidden\|\.internal\) \(.*\)/-L \2/p' < "$SYMS" > "$SYMS.hidden" ||exit $?
+ if [ -s "$SYMS.hidden" ]
+ then
+ xargs ${VERBOSE:+-t} $OBJCOPY "$OFILE.gdb" < "$SYMS.hidden" ||exit $?
+ fi
+ rm -f "$SYMS" "$SYMS.hidden"
+ ;;
+ esac
+ case " $OBJCOPYOP " in
+ *" --weaken "*)
+ $OBJCOPY --weaken "$OFILE.gdb" ||exit $?
+ ;;
+ esac
+ fi
+ fi
+ [ "$RFILE" = "$OFILE.gdb" ] || rm -f "$RFILE" # not needed for any reason
+ rm -f "$NEWLDSCRIPT"
+ exit 0
+ fi
+
+ exec $LINKER -o "$OFILE" $ARG1
+fi
+
+#
+# otherwise pretend we aren't here
+#
+
+exec $LINKER "$@"
--- /dev/null
+#!/bin/bash
+
+cvs_stamp=$(cut -d/ -f4 CVS/Entries | sort | tail -n 1)
+stamp=$(date +%Y%m%d --date="${cvs_stamp}")
+
+p="elf2flt-${stamp}"
+rm -f elf2flt-*.tar.bz2
+mkdir ../${p}
+cp -r * ../${p}/ || exit 1
+tar jcf ${p}.tar.bz2 --exclude .svn -C .. ${p}
+rm -r ../${p} || exit 1
+du -b ${p}.tar.bz2
--- /dev/null
+#ifndef HAVE_DCGETTEXT
+const char *dcgettext (const char *domain, const char *msg, int category)
+{
+ return msg;
+}
+#endif /* !HAVE_DCGETTEXT */
+++ /dev/null
-config BR2_ELF2FLT
- bool "Enable elf2flt support?"
- depends on BR2_arm || BR2_sh || BR2_sparc
- help
- uCLinux uses a Binary Flat format commonly known as BFLT. It
- is a relatively simple and lightweight executable format
- based on the original a.out format.
-
- This option compiles the required tools and makes the required
- modifications on your toolchain (linker).
+++ /dev/null
-################################################################################
-#
-# elf2flt
-#
-################################################################################
-
-# we keep a local checkout of uClinux CVS
-ELF2FLT_SOURCE:=$(ELF2FLT_DIR)/elf2flt
-ELF2FLT_DIR:=$(TOOLCHAIN_DIR)/elf2flt
-ELF2FLT_BINARY:=elf2flt
-
-$(ELF2FLT_DIR)/.unpacked:
- cp -r toolchain/elf2flt/elf2flt "$(TOOLCHAIN_DIR)/elf2flt"
- touch $@
-
-$(ELF2FLT_DIR)/.patched: $(ELF2FLT_DIR)/.unpacked
- $(call CONFIG_UPDATE,$(@D))
- touch $@
-
-$(ELF2FLT_DIR)/.configured: $(ELF2FLT_DIR)/.patched
- (cd $(ELF2FLT_DIR); rm -rf config.cache; \
- LDFLAGS="$(HOST_LDFLAGS) -lz" \
- $(ELF2FLT_DIR)/configure $(QUIET) \
- --with-bfd-include-dir=$(HOST_BINUTILS_DIR)/bfd/ \
- --with-binutils-include-dir=$(HOST_BINUTILS_DIR)/include/ \
- --target=$(GNU_TARGET_NAME) \
- --with-libbfd=$(HOST_BINUTILS_DIR)/bfd/libbfd.a \
- --with-libiberty=$(HOST_BINUTILS_DIR)/libiberty/libiberty.a \
- --prefix=$(HOST_DIR)/usr)
- touch $@
-
-$(ELF2FLT_DIR)/$(ELF2FLT_BINARY): $(ELF2FLT_DIR)/.configured
- $(MAKE) -C $(ELF2FLT_DIR) all
- $(MAKE) -C $(ELF2FLT_DIR) install
-
-elf2flt: uclibc_target uclibc-configured binutils gcc host-zlib $(ELF2FLT_DIR)/$(ELF2FLT_BINARY)
-
-elf2flt-clean:
- rm -rf $(ELF2FLT_SOURCE)
-
-elf2flt-dirclean:
- rm -rf $(ELF2FLT_SOURCE)
-
-ifeq ($(BR2_ELF2FLT),y)
-TARGETS+=elf2flt
-endif
+++ /dev/null
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-\f
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-\f
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-\f
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-\f
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-\f
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) year name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the program
- `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
- <signature of Ty Coon>, 1 April 1989
- Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs. If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
-Public License instead of this License.
+++ /dev/null
-srcdir = @srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-libdir = @libdir@
-includedir = @includedir@
-
-CC = @CC@
-CPU = @target_cpu@
-TARGET = @target_alias@
-CFLAGS = @CFLAGS@
-INCLUDES = @bfd_include_dir@ @binutils_include_dir@
-CPPFLAGS = @CPPFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBS = @LIBS@
-INSTALL = @INSTALL@
-DEFS = @DEFS@ -DTARGET_$(CPU)
-EXEEXT = @EXEEXT@
-OBJEXT = @OBJEXT@
-
-HOST = @host_alias@
-
-ifneq (,$(findstring mingw32,$(HOST)))
- LIBS := $(LIBS) -lws2_32
-endif
-
-# force link order under cygwin to avoid getopts / libiberty clash
-ifneq ($(strip $(shell gcc -v 2>&1 | grep "cygwin")),)
- LIBS := -lcygwin $(LIBS)
-endif
-
-CCFLAGS = $(CFLAGS) $(DEFS) $(INCLUDES)
-
-LDFILE= elf2flt.ld
-ifeq ($(strip $(CPU)),e1)
-SRC_LDFILE= $(CPU)-elf2flt.ld
-else
-SRC_LDFILE= elf2flt.ld
-endif
-
-target_bindir = $(prefix)/$(TARGET)/bin
-target_libdir = $(prefix)/$(TARGET)/lib
-
-
-PROG_ELF2FLT = elf2flt$(EXEEXT)
-PROG_FLTHDR = flthdr$(EXEEXT)
-PROGS = $(PROG_ELF2FLT) $(PROG_FLTHDR)
-
-all: $(PROGS)
-
-$(PROG_ELF2FLT): elf2flt.c stubs.c Makefile
- $(CC) $(CCFLAGS) $(LDFLAGS) -o $@ $(srcdir)/elf2flt.c $(srcdir)/stubs.c $(LIBS)
-
-$(PROG_FLTHDR): flthdr.c Makefile
- $(CC) $(CCFLAGS) $(LDFLAGS) -o $@ $(srcdir)/flthdr.c $(LIBS)
-
-clean:
- -rm -f $(PROGS) *.$(OBJEXT)
-
-distclean: clean
- -rm -f Makefile config.log config.status config.cache ld-elf2flt
-
-install:
- $(INSTALL) -d $(bindir)
- $(INSTALL) -d $(target_bindir)
- $(INSTALL) -d $(target_libdir)
- $(INSTALL) -m 755 $(PROG_FLTHDR) $(bindir)/$(TARGET)-$(PROG_FLTHDR)
- $(INSTALL) -m 755 $(PROG_FLTHDR) $(target_bindir)/$(PROG_FLTHDR)
- $(INSTALL) -m 755 $(PROG_ELF2FLT) $(bindir)/$(TARGET)-$(PROG_ELF2FLT)
- $(INSTALL) -m 755 $(PROG_ELF2FLT) $(target_bindir)/$(PROG_ELF2FLT)
- [ -f $(bindir)/$(TARGET)-ld.real$(EXEEXT) ] || \
- mv $(bindir)/$(TARGET)-ld$(EXEEXT) $(bindir)/$(TARGET)-ld.real$(EXEEXT)
- [ -f $(target_bindir)/ld.real$(EXEEXT) ] || \
- mv $(target_bindir)/ld$(EXEEXT) $(target_bindir)/ld.real$(EXEEXT)
- $(INSTALL) -m 755 ld-elf2flt $(bindir)/$(TARGET)-ld
- $(INSTALL) -m 755 ld-elf2flt $(target_bindir)/ld
- $(INSTALL) -m 644 $(srcdir)/$(SRC_LDFILE) $(target_libdir)/$(LDFILE)
-
-
+++ /dev/null
-
-README - elf2flt
-----------------
-
-Copyright (C) 2001-2003, SnapGear (www.snapgear.com)
-davidm@snapgear.com
-gerg@snapgear.com
-
-This is Free Software, under the GNU Public Licence v2 or greater. See
-LICENSE.TXT for more details.
-
-Elf2flt with PIC, ZFLAT and full reloc support. Currently supported
-targets include: m68k/ColdFire, ARM, Sparc, NEC v850, MicroBlaze,
-h8300 and SuperH.
-
-COMPILING:
-
-You need an appropriate libbfd.a and libiberty.a for your target to
-build this tool. They are normally part of the binutils package.
-
-To compile elf2flt do:
-
- ./configure --target=<ARCH> --with-libbfd=<libbfd.a> --with-libiberty=<libiberty.a>
- make
- make install
-
-The <ARCH> argument to configure specifies what the target architecture is.
-This should be the same target as you used to build the binutils and gcc
-cross development tools. The --with-libbfd and --with-libiberty arguments
-specify where the libbfd.a and libiberty.a library files are to use.
-
-
-FILES:
-
-README - this file
-configure - autoconf configuration shell script
-configure.in- original autoconf file
-config.* - autoconf support scripts
-Makefile.in - Makefile template used by configure
-elf2flt.c - the source
-flthdr.c - flat header manipulation program
-flat.h - header from uClinux kernel sources
-elf2flt.ld - an example linker script that works for C/C++ and uClinux
-ld-elf2flt - A linker replacement that implements a -elf2flt option for the
- linker and runs elf2flt automatically for you. It auto
- detects PIC/non-PIC code and adjusts its option accordingly.
- It uses the environment variable FLTFLAGS when running
- elf2flt. It runs /.../m68k-elf-ld.real to do the actual
- linking.
-
-TIPS:
-
-The ld-elf2flt produces 2 files as output. The binary flat file X, and
-X.gdb which is used for debugging and PIC purposes.
-
-The '-p' option requires an elf executable linked at address 0. The
-elf2flt.ld provided will generate the correct format binary when linked
-with the real linker with *no* '-r' option for the linker.
-
-The '-r' flag can be added to PIC builds to get contiguous code/data. This
-is good for loading application symbols into gdb (add-symbol-file XXX.gdb).
-
+++ /dev/null
-#! /bin/sh
-# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
-
-timestamp='2003-10-16'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
- --version | -v )
- echo "$version" ; exit 0 ;;
- --help | --h* | -h )
- echo "$usage"; exit 0 ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help" >&2
- exit 1 ;;
- * )
- break ;;
- esac
-done
-
-if test $# != 0; then
- echo "$me: too many arguments$help" >&2
- exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int x;" > $dummy.c ;
- for c in cc gcc c89 c99 ; do
- if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
- CC_FOR_BUILD="$c"; break ;
- fi ;
- done ;
- if test x"$CC_FOR_BUILD" = x ; then
- CC_FOR_BUILD=no_compiler_found ;
- fi
- ;;
- ,,*) CC_FOR_BUILD=$CC ;;
- ,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- *:NetBSD:*:*)
- # NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
- # switched to ELF, *-*-netbsd* would select the old
- # object file format. This provides both forward
- # compatibility and a consistent mechanism for selecting the
- # object file format.
- #
- # Note: NetBSD doesn't particularly care about the vendor
- # portion of the name. We always set it to "unknown".
- sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
- case "${UNAME_MACHINE_ARCH}" in
- armeb) machine=armeb-unknown ;;
- arm*) machine=arm-unknown ;;
- sh3el) machine=shl-unknown ;;
- sh3eb) machine=sh-unknown ;;
- *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
- esac
- # The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE_ARCH}" in
- arm*|i386|m68k|ns32k|sh3*|sparc|vax)
- eval $set_cc_for_build
- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep __ELF__ >/dev/null
- then
- # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
- # Return netbsd for either. FIX?
- os=netbsd
- else
- os=netbsdelf
- fi
- ;;
- *)
- os=netbsd
- ;;
- esac
- # The OS release
- # Debian GNU/NetBSD machines have a different userland, and
- # thus, need a distinct triplet. However, they do not need
- # kernel version information, so it can be replaced with a
- # suitable tag, in the style of linux-gnu.
- case "${UNAME_VERSION}" in
- Debian*)
- release='-gnu'
- ;;
- *)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- ;;
- esac
- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
- # contains redundant information, the shorter form:
- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
- exit 0 ;;
- amiga:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- arc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- hp300:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mac68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- macppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme88k:OpenBSD:*:*)
- echo m88k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvmeppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- pmax:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sgi:OpenBSD:*:*)
- echo mipseb-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sun3:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- wgrisc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- *:OpenBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- alpha:OSF1:*:*)
- if test $UNAME_RELEASE = "V4.0"; then
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- fi
- # According to Compaq, /usr/sbin/psrinfo has been available on
- # OSF/1 and Tru64 systems produced since 1995. I hope that
- # covers most systems running today. This code pipes the CPU
- # types through head -n 1, so we only detect the type of CPU 0.
- ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
- case "$ALPHA_CPU_TYPE" in
- "EV4 (21064)")
- UNAME_MACHINE="alpha" ;;
- "EV4.5 (21064)")
- UNAME_MACHINE="alpha" ;;
- "LCA4 (21066/21068)")
- UNAME_MACHINE="alpha" ;;
- "EV5 (21164)")
- UNAME_MACHINE="alphaev5" ;;
- "EV5.6 (21164A)")
- UNAME_MACHINE="alphaev56" ;;
- "EV5.6 (21164PC)")
- UNAME_MACHINE="alphapca56" ;;
- "EV5.7 (21164PC)")
- UNAME_MACHINE="alphapca57" ;;
- "EV6 (21264)")
- UNAME_MACHINE="alphaev6" ;;
- "EV6.7 (21264A)")
- UNAME_MACHINE="alphaev67" ;;
- "EV6.8CB (21264C)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8AL (21264B)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8CX (21264D)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.9A (21264/EV69A)")
- UNAME_MACHINE="alphaev69" ;;
- "EV7 (21364)")
- UNAME_MACHINE="alphaev7" ;;
- "EV7.9 (21364A)")
- UNAME_MACHINE="alphaev79" ;;
- esac
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit 0 ;;
- Alpha*:OpenVMS:*:*)
- echo alpha-hp-vms
- exit 0 ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
- exit 0 ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit 0 ;;
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-unknown-sysv4
- exit 0;;
- *:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
- exit 0 ;;
- *:[Mm]orph[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-morphos
- exit 0 ;;
- *:OS/390:*:*)
- echo i370-ibm-openedition
- exit 0 ;;
- *:OS400:*:*)
- echo powerpc-ibm-os400
- exit 0 ;;
- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
- exit 0;;
- SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
- echo hppa1.1-hitachi-hiuxmpp
- exit 0;;
- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
- # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
- if test "`(/bin/universe) 2>/dev/null`" = att ; then
- echo pyramid-pyramid-sysv3
- else
- echo pyramid-pyramid-bsd
- fi
- exit 0 ;;
- NILE*:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit 0 ;;
- DRS?6000:unix:4.0:6*)
- echo sparc-icl-nx6
- exit 0 ;;
- DRS?6000:UNIX_SV:4.2*:7*)
- case `/usr/bin/uname -p` in
- sparc) echo sparc-icl-nx7 && exit 0 ;;
- esac ;;
- sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- i86pc:SunOS:5.*:*)
- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:6*:*)
- # According to config.sub, this is the proper way to canonicalize
- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
- # it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:*:*)
- case "`/usr/bin/arch -k`" in
- Series*|S4*)
- UNAME_RELEASE=`uname -v`
- ;;
- esac
- # Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit 0 ;;
- sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit 0 ;;
- sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
- ;;
- sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
- ;;
- esac
- exit 0 ;;
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit 0 ;;
- # The situation for MiNT is a little confusing. The machine name
- # can be virtually everything (everything which is not
- # "atarist" or "atariste" at least should have a processor
- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
- # to the lowercase version "mint" (or "freemint"). Finally
- # the system name "TOS" denotes a system which is actually not
- # MiNT. But MiNT is downward compatible to TOS, so this should
- # be no problem.
- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit 0 ;;
- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit 0 ;;
- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit 0 ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit 0 ;;
- RISC*:Mach:*:*)
- echo mips-dec-mach_bsd4.3
- exit 0 ;;
- RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
- VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
- 2020:CLIX:*:* | 2430:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit 0 ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
- #if defined (host_mips) && defined (MIPSEB)
- #if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
- #endif
- #endif
- exit (-1);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c \
- && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
- && exit 0
- echo mips-mips-riscos${UNAME_RELEASE}
- exit 0 ;;
- Motorola:PowerMAX_OS:*:*)
- echo powerpc-motorola-powermax
- exit 0 ;;
- Motorola:*:4.3:PL8-*)
- echo powerpc-harris-powermax
- exit 0 ;;
- Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
- echo powerpc-harris-powermax
- exit 0 ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit 0 ;;
- m88k:CX/UX:7*:*)
- echo m88k-harris-cxux7
- exit 0 ;;
- m88k:*:4*:R4*)
- echo m88k-motorola-sysv4
- exit 0 ;;
- m88k:*:3*:R3*)
- echo m88k-motorola-sysv3
- exit 0 ;;
- AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
- then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
- then
- echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
- else
- echo i586-dg-dgux${UNAME_RELEASE}
- fi
- exit 0 ;;
- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
- echo m88k-dolphin-sysv3
- exit 0 ;;
- M88*:*:R3*:*)
- # Delta 88k system running SVR3
- echo m88k-motorola-sysv3
- exit 0 ;;
- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
- echo m88k-tektronix-sysv3
- exit 0 ;;
- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
- echo m68k-tektronix-bsd
- exit 0 ;;
- *:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit 0 ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i*86:AIX:*:*)
- echo i386-ibm-aix
- exit 0 ;;
- ia64:AIX:*:*)
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit 0 ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <sys/systemcfg.h>
-
- main()
- {
- if (!__power_pc())
- exit(1);
- puts("powerpc-ibm-aix3.2.5");
- exit(0);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
- echo rs6000-ibm-aix3.2.5
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
- else
- echo rs6000-ibm-aix3.2
- fi
- exit 0 ;;
- *:AIX:*:[45])
- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
- IBM_ARCH=rs6000
- else
- IBM_ARCH=powerpc
- fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit 0 ;;
- *:AIX:*:*)
- echo rs6000-ibm-aix
- exit 0 ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
- echo romp-ibm-bsd4.4
- exit 0 ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit 0 ;; # report: romp-ibm BSD 4.3
- *:BOSX:*:*)
- echo rs6000-bull-bosx
- exit 0 ;;
- DPX/2?00:B.O.S.:*:*)
- echo m68k-bull-sysv3
- exit 0 ;;
- 9000/[34]??:4.3bsd:1.*:*)
- echo m68k-hp-bsd
- exit 0 ;;
- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
- echo m68k-hp-bsd4.4
- exit 0 ;;
- 9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/[678][0-9][0-9])
- if [ -x /usr/bin/getconf ]; then
- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
- fi
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-
- #define _HPUX_SOURCE
- #include <stdlib.h>
- #include <unistd.h>
-
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
-
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
-EOF
- (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
- test -z "$HP_ARCH" && HP_ARCH=hppa
- fi ;;
- esac
- if [ ${HP_ARCH} = "hppa2.0w" ]
- then
- # avoid double evaluation of $set_cc_for_build
- test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
- then
- HP_ARCH="hppa2.0w"
- else
- HP_ARCH="hppa64"
- fi
- fi
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit 0 ;;
- ia64:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
- exit 0 ;;
- 3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <unistd.h>
- int
- main ()
- {
- long cpu = sysconf (_SC_CPU_VERSION);
- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
- results, however. */
- if (CPU_IS_PA_RISC (cpu))
- {
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
- default: puts ("hppa-hitachi-hiuxwe2"); break;
- }
- }
- else if (CPU_IS_HP_MC68K (cpu))
- puts ("m68k-hitachi-hiuxwe2");
- else puts ("unknown-hitachi-hiuxwe2");
- exit (0);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
- echo unknown-hitachi-hiuxwe2
- exit 0 ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
- echo hppa1.1-hp-bsd
- exit 0 ;;
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit 0 ;;
- *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
- echo hppa1.0-hp-mpeix
- exit 0 ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
- echo hppa1.1-hp-osf
- exit 0 ;;
- hp8??:OSF1:*:*)
- echo hppa1.0-hp-osf
- exit 0 ;;
- i*86:OSF1:*:*)
- if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
- else
- echo ${UNAME_MACHINE}-unknown-osf1
- fi
- exit 0 ;;
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit 0 ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit 0 ;;
- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit 0 ;;
- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
- echo c34-convex-bsd
- exit 0 ;;
- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
- echo c38-convex-bsd
- exit 0 ;;
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit 0 ;;
- CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
- -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- *:UNICOS/mp:*:*)
- echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit 0 ;;
- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit 0 ;;
- sparc*:BSD/OS:*:*)
- echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
- *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
- *:FreeBSD:*:*)
- # Determine whether the default compiler uses glibc.
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #if __GLIBC__ >= 2
- LIBC=gnu
- #else
- LIBC=
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
- # GNU/KFreeBSD systems have a "k" prefix to indicate we are using
- # FreeBSD's kernel, but not the complete OS.
- case ${LIBC} in gnu) kernel_only='k' ;; esac
- echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
- exit 0 ;;
- i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
- exit 0 ;;
- i*:MINGW*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
- exit 0 ;;
- i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
- exit 0 ;;
- x86:Interix*:[34]*)
- echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
- exit 0 ;;
- [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
- echo i${UNAME_MACHINE}-pc-mks
- exit 0 ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i586-pc-interix
- exit 0 ;;
- i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
- exit 0 ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin
- exit 0 ;;
- prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- *:GNU:*:*)
- # the GNU system
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit 0 ;;
- *:GNU/*:*:*)
- # other systems with GNU libc and userland
- echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
- exit 0 ;;
- i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
- exit 0 ;;
- arm*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- cris:Linux:*:*)
- echo cris-axis-linux-gnu
- exit 0 ;;
- ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- mips:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips
- #undef mipsel
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mipsel
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips
- #else
- CPU=
- #endif
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
- ;;
- mips64:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips64
- #undef mips64el
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mips64el
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips64
- #else
- CPU=
- #endif
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
- ;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
- exit 0 ;;
- ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
- exit 0 ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit 0 ;;
- parisc:Linux:*:* | hppa:Linux:*:*)
- # Look for CPU level
- case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-gnu ;;
- PA8*) echo hppa2.0-unknown-linux-gnu ;;
- *) echo hppa-unknown-linux-gnu ;;
- esac
- exit 0 ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
- exit 0 ;;
- s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
- exit 0 ;;
- sh64*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- x86_64:Linux:*:*)
- echo x86_64-unknown-linux-gnu
- exit 0 ;;
- i*86:Linux:*:*)
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us. cd to the root directory to prevent
- # problems with other programs or directories called `ld' in the path.
- # Set LC_ALL=C to ensure ld outputs messages in English.
- ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
- | sed -ne '/supported targets:/!d
- s/[ ][ ]*/ /g
- s/.*supported targets: *//
- s/ .*//
- p'`
- case "$ld_supported_targets" in
- elf32-i386)
- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
- ;;
- a.out-i386-linux)
- echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit 0 ;;
- coff-i386)
- echo "${UNAME_MACHINE}-pc-linux-gnucoff"
- exit 0 ;;
- "")
- # Either a pre-BFD a.out linker (linux-gnuoldld) or
- # one that does not give us useful --help.
- echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
- exit 0 ;;
- esac
- # Determine whether the default compiler is a.out or elf
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #ifdef __ELF__
- # ifdef __GLIBC__
- # if __GLIBC__ >= 2
- LIBC=gnu
- # else
- LIBC=gnulibc1
- # endif
- # else
- LIBC=gnulibc1
- # endif
- #else
- #ifdef __INTEL_COMPILER
- LIBC=gnu
- #else
- LIBC=gnuaout
- #endif
- #endif
- #ifdef __dietlibc__
- LIBC=dietlibc
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
- test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
- test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
- ;;
- i*86:DYNIX/ptx:4*:*)
- # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
- # earlier versions are messed up and put the nodename in both
- # sysname and nodename.
- echo i386-sequent-sysv4
- exit 0 ;;
- i*86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
- # I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit 0 ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit 0 ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
- exit 0 ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
- exit 0 ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit 0 ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
- else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
- fi
- exit 0 ;;
- i*86:*:5:[78]*)
- case `/bin/uname -X | grep "^Machine"` in
- *486*) UNAME_MACHINE=i486 ;;
- *Pentium) UNAME_MACHINE=i586 ;;
- *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
- esac
- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit 0 ;;
- i*86:*:3.2:*)
- if test -f /usr/options/cb.name; then
- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
- elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
- (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
- && UNAME_MACHINE=i586
- (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
- && UNAME_MACHINE=i686
- (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
- && UNAME_MACHINE=i686
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
- else
- echo ${UNAME_MACHINE}-pc-sysv32
- fi
- exit 0 ;;
- pc:*:*:*)
- # Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i386.
- echo i386-pc-msdosdjgpp
- exit 0 ;;
- Intel:Mach:3*:*)
- echo i386-pc-mach3
- exit 0 ;;
- paragon:*:*:*)
- echo i860-intel-osf1
- exit 0 ;;
- i860:*:4.*:*) # i860-SVR4
- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
- else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
- fi
- exit 0 ;;
- mini*:CTIX:SYS*5:*)
- # "miniframe"
- echo m68010-convergent-sysv
- exit 0 ;;
- mc68k:UNIX:SYSTEM5:3.51m)
- echo m68k-convergent-sysv
- exit 0 ;;
- M680?0:D-NIX:5.3:*)
- echo m68k-diab-dnix
- exit 0 ;;
- M68*:*:R3V[567]*:*)
- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
- 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
- OS_REL=''
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4.3${OS_REL} && exit 0
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4 && exit 0 ;;
- m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- mc68030:UNIX_System_V:4.*:*)
- echo m68k-atari-sysv4
- exit 0 ;;
- TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- rs6000:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
- echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
- exit 0 ;;
- RM*:ReliantUNIX-*:*:*)
- echo mips-sni-sysv4
- exit 0 ;;
- RM*:SINIX-*:*:*)
- echo mips-sni-sysv4
- exit 0 ;;
- *:SINIX-*:*:*)
- if uname -p 2>/dev/null >/dev/null ; then
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
- else
- echo ns32k-sni-sysv
- fi
- exit 0 ;;
- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <Richard.M.Bartel@ccMail.Census.GOV>
- echo i586-unisys-sysv4
- exit 0 ;;
- *:UNIX_System_V:4*:FTX*)
- # From Gerald Hewes <hewes@openmarket.com>.
- # How about differentiating between stratus architectures? -djm
- echo hppa1.1-stratus-sysv4
- exit 0 ;;
- *:*:*:FTX*)
- # From seanf@swdc.stratus.com.
- echo i860-stratus-sysv4
- exit 0 ;;
- *:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo hppa1.1-stratus-vos
- exit 0 ;;
- mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
- exit 0 ;;
- news*:NEWS-OS:6*:*)
- echo mips-sony-newsos6
- exit 0 ;;
- R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
- if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
- else
- echo mips-unknown-sysv${UNAME_RELEASE}
- fi
- exit 0 ;;
- BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
- echo powerpc-be-beos
- exit 0 ;;
- BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
- echo powerpc-apple-beos
- exit 0 ;;
- BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
- echo i586-pc-beos
- exit 0 ;;
- SX-4:SUPER-UX:*:*)
- echo sx4-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- SX-6:SUPER-UX:*:*)
- echo sx6-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
- *:Rhapsody:*:*)
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
- *:Darwin:*:*)
- case `uname -p` in
- *86) UNAME_PROCESSOR=i686 ;;
- powerpc) UNAME_PROCESSOR=powerpc ;;
- esac
- echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
- exit 0 ;;
- *:procnto*:*:* | *:QNX:[0123456789]*:*)
- UNAME_PROCESSOR=`uname -p`
- if test "$UNAME_PROCESSOR" = "x86"; then
- UNAME_PROCESSOR=i386
- UNAME_MACHINE=pc
- fi
- echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
- exit 0 ;;
- *:QNX:*:4*)
- echo i386-pc-qnx
- exit 0 ;;
- NSR-[DGKLNPTVWY]:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
- exit 0 ;;
- *:NonStop-UX:*:*)
- echo mips-compaq-nonstopux
- exit 0 ;;
- BS2000:POSIX*:*:*)
- echo bs2000-siemens-sysv
- exit 0 ;;
- DS/*:UNIX_System_V:*:*)
- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit 0 ;;
- *:Plan9:*:*)
- # "uname -m" is not consistent, so use $cputype instead. 386
- # is converted to i386 for consistency with other x86
- # operating systems.
- if test "$cputype" = "386"; then
- UNAME_MACHINE=i386
- else
- UNAME_MACHINE="$cputype"
- fi
- echo ${UNAME_MACHINE}-unknown-plan9
- exit 0 ;;
- *:TOPS-10:*:*)
- echo pdp10-unknown-tops10
- exit 0 ;;
- *:TENEX:*:*)
- echo pdp10-unknown-tenex
- exit 0 ;;
- KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
- echo pdp10-dec-tops20
- exit 0 ;;
- XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
- echo pdp10-xkl-tops20
- exit 0 ;;
- *:TOPS-20:*:*)
- echo pdp10-unknown-tops20
- exit 0 ;;
- *:ITS:*:*)
- echo pdp10-unknown-its
- exit 0 ;;
- SEI:*:*:SEIUX)
- echo mips-sei-seiux${UNAME_RELEASE}
- exit 0 ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit 0 ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit 0 ;;
- c34*)
- echo c34-convex-bsd
- exit 0 ;;
- c38*)
- echo c38-convex-bsd
- exit 0 ;;
- c4*)
- echo c4-convex-bsd
- exit 0 ;;
- esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
- ftp://ftp.gnu.org/pub/gnu/config/
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo = `(hostinfo) 2>/dev/null`
-/bin/universe = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
+++ /dev/null
-#! /bin/sh
-# Configuration validation subroutine script.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
-
-timestamp='2005-04-22'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support. The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
- $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
- --version | -v )
- echo "$version" ; exit 0 ;;
- --help | --h* | -h )
- echo "$usage"; exit 0 ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help"
- exit 1 ;;
-
- *local*)
- # First pass through any local machine types.
- echo $1
- exit 0;;
-
- * )
- break ;;
- esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
- exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
- exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
- nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
- kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
- *)
- basic_machine=`echo $1 | sed 's/-[^-]*$//'`
- if [ $basic_machine != $1 ]
- then os=`echo $1 | sed 's/.*-/-/'`
- else os=; fi
- ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work. We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
- -sun*os*)
- # Prevent following clause from handling this invalid input.
- ;;
- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis | -knuth | -cray)
- os=
- basic_machine=$1
- ;;
- -sim | -cisco | -oki | -wec | -winbond)
- os=
- basic_machine=$1
- ;;
- -scout)
- ;;
- -wrs)
- os=-vxworks
- basic_machine=$1
- ;;
- -chorusos*)
- os=-chorusos
- basic_machine=$1
- ;;
- -chorusrdb)
- os=-chorusrdb
- basic_machine=$1
- ;;
- -hiux*)
- os=-hiuxwe2
- ;;
- -sco5)
- os=-sco3.2v5
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco4)
- os=-sco3.2v4
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2.[4-9]*)
- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2v[4-9]*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco*)
- os=-sco3.2v2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -udk*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -isc)
- os=-isc2.2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -clix*)
- basic_machine=clipper-intergraph
- ;;
- -isc*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -lynx*)
- os=-lynxos
- ;;
- -ptx*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
- ;;
- -windowsnt*)
- os=`echo $os | sed -e 's/windowsnt/winnt/'`
- ;;
- -psos*)
- os=-psos
- ;;
- -mint | -mint[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
- # Recognize the basic CPU types without company name.
- # Some are omitted here because they have special meanings below.
- 1750a | 580 \
- | a29k \
- | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
- | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
- | am33_2.0 \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
- | bfin \
- | c4x | clipper \
- | d10v | d30v | dlx | dsp16xx \
- | fr30 | frv \
- | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
- | i370 | i860 | i960 | ia64 \
- | ip2k | iq2000 \
- | m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
- | mips | mipsbe | mipseb | mipsel | mipsle \
- | mips16 \
- | mips64 | mips64el \
- | mips64vr | mips64vrel \
- | mips64orion | mips64orionel \
- | mips64vr4100 | mips64vr4100el \
- | mips64vr4300 | mips64vr4300el \
- | mips64vr5000 | mips64vr5000el \
- | mipsisa32 | mipsisa32el \
- | mipsisa32r2 | mipsisa32r2el \
- | mipsisa64 | mipsisa64el \
- | mipsisa64r2 | mipsisa64r2el \
- | mipsisa64sb1 | mipsisa64sb1el \
- | mipsisa64sr71k | mipsisa64sr71kel \
- | mipstx39 | mipstx39el \
- | mn10200 | mn10300 \
- | msp430 \
- | nios | nios2 \
- | ns16k | ns32k \
- | openrisc | or32 \
- | pdp10 | pdp11 | pj | pjl \
- | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
- | pyramid \
- | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
- | sh64 | sh64le \
- | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
- | sparcv8 | sparcv9 | sparcv9b \
- | strongarm \
- | tahoe | thumb | tic4x | tic80 | tron \
- | v850 | v850e \
- | microblaze \
- | we32k \
- | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
- | z8k)
- basic_machine=$basic_machine-unknown
- ;;
- m32c)
- basic_machine=$basic_machine-unknown
- ;;
- m6811 | m68hc11 | m6812 | m68hc12)
- # Motorola 68HC11/12.
- basic_machine=$basic_machine-unknown
- os=-none
- ;;
- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
- ;;
-
- # We use `pc' rather than `unknown'
- # because (1) that's what they normally are, and
- # (2) the word "unknown" tends to confuse beginning users.
- i*86 | x86_64)
- basic_machine=$basic_machine-pc
- ;;
- # Object if more than one company name word.
- *-*-*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
- # Recognize the basic CPU types with company name.
- 580-* \
- | a29k-* \
- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
- | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
- | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
- | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
- | avr-* \
- | bfin-* | bs2000-* \
- | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
- | clipper-* | craynv-* | cydra-* \
- | d10v-* | d30v-* | dlx-* \
- | elxsi-* \
- | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
- | h8300-* | h8500-* \
- | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
- | i*86-* | i860-* | i960-* | ia64-* \
- | ip2k-* | iq2000-* \
- | m32r-* | m32rle-* \
- | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | maxq-* | mcore-* \
- | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
- | mips16-* \
- | mips64-* | mips64el-* \
- | mips64vr-* | mips64vrel-* \
- | mips64orion-* | mips64orionel-* \
- | mips64vr4100-* | mips64vr4100el-* \
- | mips64vr4300-* | mips64vr4300el-* \
- | mips64vr5000-* | mips64vr5000el-* \
- | mipsisa32-* | mipsisa32el-* \
- | mipsisa32r2-* | mipsisa32r2el-* \
- | mipsisa64-* | mipsisa64el-* \
- | mipsisa64r2-* | mipsisa64r2el-* \
- | mipsisa64sb1-* | mipsisa64sb1el-* \
- | mipsisa64sr71k-* | mipsisa64sr71kel-* \
- | mipstx39-* | mipstx39el-* \
- | mmix-* \
- | msp430-* \
- | nios-* | nios2-* \
- | none-* | np1-* | ns16k-* | ns32k-* \
- | orion-* \
- | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
- | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
- | pyramid-* \
- | romp-* | rs6000-* \
- | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* \
- | sheb-* | shbe-* | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
- | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
- | sparclite-* \
- | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
- | tahoe-* | thumb-* \
- | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
- | tron-* \
- | v850-* | v850e-* | vax-* \
- | we32k-* \
- | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
- | xstormy16-* | xtensa-* \
- | ymp-* \
- | z8k-*)
- ;;
- m32c-*)
- ;;
- # Recognize the various machine names and aliases which stand
- # for a CPU type and a company and sometimes even an OS.
- 386bsd)
- basic_machine=i386-unknown
- os=-bsd
- ;;
- 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
- basic_machine=m68000-att
- ;;
- 3b*)
- basic_machine=we32k-att
- ;;
- a29khif)
- basic_machine=a29k-amd
- os=-udi
- ;;
- abacus)
- basic_machine=abacus-unknown
- ;;
- adobe68k)
- basic_machine=m68010-adobe
- os=-scout
- ;;
- alliant | fx80)
- basic_machine=fx80-alliant
- ;;
- altos | altos3068)
- basic_machine=m68k-altos
- ;;
- am29k)
- basic_machine=a29k-none
- os=-bsd
- ;;
- amd64)
- basic_machine=x86_64-pc
- ;;
- amd64-*)
- basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- amdahl)
- basic_machine=580-amdahl
- os=-sysv
- ;;
- amiga | amiga-*)
- basic_machine=m68k-unknown
- ;;
- amigaos | amigados)
- basic_machine=m68k-unknown
- os=-amigaos
- ;;
- amigaunix | amix)
- basic_machine=m68k-unknown
- os=-sysv4
- ;;
- apollo68)
- basic_machine=m68k-apollo
- os=-sysv
- ;;
- apollo68bsd)
- basic_machine=m68k-apollo
- os=-bsd
- ;;
- aux)
- basic_machine=m68k-apple
- os=-aux
- ;;
- balance)
- basic_machine=ns32k-sequent
- os=-dynix
- ;;
- c90)
- basic_machine=c90-cray
- os=-unicos
- ;;
- convex-c1)
- basic_machine=c1-convex
- os=-bsd
- ;;
- convex-c2)
- basic_machine=c2-convex
- os=-bsd
- ;;
- convex-c32)
- basic_machine=c32-convex
- os=-bsd
- ;;
- convex-c34)
- basic_machine=c34-convex
- os=-bsd
- ;;
- convex-c38)
- basic_machine=c38-convex
- os=-bsd
- ;;
- cray | j90)
- basic_machine=j90-cray
- os=-unicos
- ;;
- craynv)
- basic_machine=craynv-cray
- os=-unicosmp
- ;;
- cr16c)
- basic_machine=cr16c-unknown
- os=-elf
- ;;
- crds | unos)
- basic_machine=m68k-crds
- ;;
- crisv32 | crisv32-* | etraxfs*)
- basic_machine=crisv32-axis
- ;;
- cris | cris-* | etrax*)
- basic_machine=cris-axis
- ;;
- crx)
- basic_machine=crx-unknown
- os=-elf
- ;;
- da30 | da30-*)
- basic_machine=m68k-da30
- ;;
- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
- basic_machine=mips-dec
- ;;
- decsystem10* | dec10*)
- basic_machine=pdp10-dec
- os=-tops10
- ;;
- decsystem20* | dec20*)
- basic_machine=pdp10-dec
- os=-tops20
- ;;
- delta | 3300 | motorola-3300 | motorola-delta \
- | 3300-motorola | delta-motorola)
- basic_machine=m68k-motorola
- ;;
- delta88)
- basic_machine=m88k-motorola
- os=-sysv3
- ;;
- djgpp)
- basic_machine=i586-pc
- os=-msdosdjgpp
- ;;
- dpx20 | dpx20-*)
- basic_machine=rs6000-bull
- os=-bosx
- ;;
- dpx2* | dpx2*-bull)
- basic_machine=m68k-bull
- os=-sysv3
- ;;
- ebmon29k)
- basic_machine=a29k-amd
- os=-ebmon
- ;;
- elxsi)
- basic_machine=elxsi-elxsi
- os=-bsd
- ;;
- encore | umax | mmax)
- basic_machine=ns32k-encore
- ;;
- es1800 | OSE68k | ose68k | ose | OSE)
- basic_machine=m68k-ericsson
- os=-ose
- ;;
- fx2800)
- basic_machine=i860-alliant
- ;;
- genix)
- basic_machine=ns32k-ns
- ;;
- gmicro)
- basic_machine=tron-gmicro
- os=-sysv
- ;;
- go32)
- basic_machine=i386-pc
- os=-go32
- ;;
- h3050r* | hiux*)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- h8300hms)
- basic_machine=h8300-hitachi
- os=-hms
- ;;
- h8300xray)
- basic_machine=h8300-hitachi
- os=-xray
- ;;
- h8500hms)
- basic_machine=h8500-hitachi
- os=-hms
- ;;
- harris)
- basic_machine=m88k-harris
- os=-sysv3
- ;;
- hp300-*)
- basic_machine=m68k-hp
- ;;
- hp300bsd)
- basic_machine=m68k-hp
- os=-bsd
- ;;
- hp300hpux)
- basic_machine=m68k-hp
- os=-hpux
- ;;
- hp3k9[0-9][0-9] | hp9[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k2[0-9][0-9] | hp9k31[0-9])
- basic_machine=m68000-hp
- ;;
- hp9k3[2-9][0-9])
- basic_machine=m68k-hp
- ;;
- hp9k6[0-9][0-9] | hp6[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k7[0-79][0-9] | hp7[0-79][0-9])
- basic_machine=hppa1.1-hp
- ;;
- hp9k78[0-9] | hp78[0-9])
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][13679] | hp8[0-9][13679])
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][0-9] | hp8[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hppa-next)
- os=-nextstep3
- ;;
- hppaosf)
- basic_machine=hppa1.1-hp
- os=-osf
- ;;
- hppro)
- basic_machine=hppa1.1-hp
- os=-proelf
- ;;
- i370-ibm* | ibm*)
- basic_machine=i370-ibm
- ;;
-# I'm not sure what "Sysv32" means. Should this be sysv3.2?
- i*86v32)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv32
- ;;
- i*86v4*)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv4
- ;;
- i*86v)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv
- ;;
- i*86sol2)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-solaris2
- ;;
- i386mach)
- basic_machine=i386-mach
- os=-mach
- ;;
- i386-vsta | vsta)
- basic_machine=i386-unknown
- os=-vsta
- ;;
- iris | iris4d)
- basic_machine=mips-sgi
- case $os in
- -irix*)
- ;;
- *)
- os=-irix4
- ;;
- esac
- ;;
- isi68 | isi)
- basic_machine=m68k-isi
- os=-sysv
- ;;
- m88k-omron*)
- basic_machine=m88k-omron
- ;;
- magnum | m3230)
- basic_machine=mips-mips
- os=-sysv
- ;;
- merlin)
- basic_machine=ns32k-utek
- os=-sysv
- ;;
- mingw32)
- basic_machine=i386-pc
- os=-mingw32
- ;;
- miniframe)
- basic_machine=m68000-convergent
- ;;
- *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
- mips3*-*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- ;;
- mips3*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
- ;;
- monitor)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- morphos)
- basic_machine=powerpc-unknown
- os=-morphos
- ;;
- msdos)
- basic_machine=i386-pc
- os=-msdos
- ;;
- mvs)
- basic_machine=i370-ibm
- os=-mvs
- ;;
- ncr3000)
- basic_machine=i486-ncr
- os=-sysv4
- ;;
- netbsd386)
- basic_machine=i386-unknown
- os=-netbsd
- ;;
- netwinder)
- basic_machine=armv4l-rebel
- os=-linux
- ;;
- news | news700 | news800 | news900)
- basic_machine=m68k-sony
- os=-newsos
- ;;
- news1000)
- basic_machine=m68030-sony
- os=-newsos
- ;;
- news-3600 | risc-news)
- basic_machine=mips-sony
- os=-newsos
- ;;
- necv70)
- basic_machine=v70-nec
- os=-sysv
- ;;
- next | m*-next )
- basic_machine=m68k-next
- case $os in
- -nextstep* )
- ;;
- -ns2*)
- os=-nextstep2
- ;;
- *)
- os=-nextstep3
- ;;
- esac
- ;;
- nh3000)
- basic_machine=m68k-harris
- os=-cxux
- ;;
- nh[45]000)
- basic_machine=m88k-harris
- os=-cxux
- ;;
- nindy960)
- basic_machine=i960-intel
- os=-nindy
- ;;
- mon960)
- basic_machine=i960-intel
- os=-mon960
- ;;
- nonstopux)
- basic_machine=mips-compaq
- os=-nonstopux
- ;;
- np1)
- basic_machine=np1-gould
- ;;
- nsr-tandem)
- basic_machine=nsr-tandem
- ;;
- op50n-* | op60c-*)
- basic_machine=hppa1.1-oki
- os=-proelf
- ;;
- or32 | or32-*)
- basic_machine=or32-unknown
- os=-coff
- ;;
- os400)
- basic_machine=powerpc-ibm
- os=-os400
- ;;
- OSE68000 | ose68000)
- basic_machine=m68000-ericsson
- os=-ose
- ;;
- os68k)
- basic_machine=m68k-none
- os=-os68k
- ;;
- pa-hitachi)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- paragon)
- basic_machine=i860-intel
- os=-osf
- ;;
- pbd)
- basic_machine=sparc-tti
- ;;
- pbb)
- basic_machine=m68k-tti
- ;;
- pc532 | pc532-*)
- basic_machine=ns32k-pc532
- ;;
- pentium | p5 | k5 | k6 | nexgen | viac3)
- basic_machine=i586-pc
- ;;
- pentiumpro | p6 | 6x86 | athlon | athlon_*)
- basic_machine=i686-pc
- ;;
- pentiumii | pentium2 | pentiumiii | pentium3)
- basic_machine=i686-pc
- ;;
- pentium4)
- basic_machine=i786-pc
- ;;
- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumpro-* | p6-* | 6x86-* | athlon-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentium4-*)
- basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pn)
- basic_machine=pn-gould
- ;;
- power) basic_machine=power-ibm
- ;;
- ppc) basic_machine=powerpc-unknown
- ;;
- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
- basic_machine=powerpcle-unknown
- ;;
- ppcle-* | powerpclittle-*)
- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64) basic_machine=powerpc64-unknown
- ;;
- ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64le | powerpc64little | ppc64-le | powerpc64-little)
- basic_machine=powerpc64le-unknown
- ;;
- ppc64le-* | powerpc64little-*)
- basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ps2)
- basic_machine=i386-ibm
- ;;
- pw32)
- basic_machine=i586-unknown
- os=-pw32
- ;;
- rom68k)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- rm[46]00)
- basic_machine=mips-siemens
- ;;
- rtpc | rtpc-*)
- basic_machine=romp-ibm
- ;;
- s390 | s390-*)
- basic_machine=s390-ibm
- ;;
- s390x | s390x-*)
- basic_machine=s390x-ibm
- ;;
- sa29200)
- basic_machine=a29k-amd
- os=-udi
- ;;
- sb1)
- basic_machine=mipsisa64sb1-unknown
- ;;
- sb1el)
- basic_machine=mipsisa64sb1el-unknown
- ;;
- sei)
- basic_machine=mips-sei
- os=-seiux
- ;;
- sequent)
- basic_machine=i386-sequent
- ;;
- sh)
- basic_machine=sh-hitachi
- os=-hms
- ;;
- sh64)
- basic_machine=sh64-unknown
- ;;
- sparclite-wrs | simso-wrs)
- basic_machine=sparclite-wrs
- os=-vxworks
- ;;
- sps7)
- basic_machine=m68k-bull
- os=-sysv2
- ;;
- spur)
- basic_machine=spur-unknown
- ;;
- st2000)
- basic_machine=m68k-tandem
- ;;
- stratus)
- basic_machine=i860-stratus
- os=-sysv4
- ;;
- sun2)
- basic_machine=m68000-sun
- ;;
- sun2os3)
- basic_machine=m68000-sun
- os=-sunos3
- ;;
- sun2os4)
- basic_machine=m68000-sun
- os=-sunos4
- ;;
- sun3os3)
- basic_machine=m68k-sun
- os=-sunos3
- ;;
- sun3os4)
- basic_machine=m68k-sun
- os=-sunos4
- ;;
- sun4os3)
- basic_machine=sparc-sun
- os=-sunos3
- ;;
- sun4os4)
- basic_machine=sparc-sun
- os=-sunos4
- ;;
- sun4sol2)
- basic_machine=sparc-sun
- os=-solaris2
- ;;
- sun3 | sun3-*)
- basic_machine=m68k-sun
- ;;
- sun4)
- basic_machine=sparc-sun
- ;;
- sun386 | sun386i | roadrunner)
- basic_machine=i386-sun
- ;;
- sv1)
- basic_machine=sv1-cray
- os=-unicos
- ;;
- symmetry)
- basic_machine=i386-sequent
- os=-dynix
- ;;
- t3e)
- basic_machine=alphaev5-cray
- os=-unicos
- ;;
- t90)
- basic_machine=t90-cray
- os=-unicos
- ;;
- tic54x | c54x*)
- basic_machine=tic54x-unknown
- os=-coff
- ;;
- tic55x | c55x*)
- basic_machine=tic55x-unknown
- os=-coff
- ;;
- tic6x | c6x*)
- basic_machine=tic6x-unknown
- os=-coff
- ;;
- tx39)
- basic_machine=mipstx39-unknown
- ;;
- tx39el)
- basic_machine=mipstx39el-unknown
- ;;
- toad1)
- basic_machine=pdp10-xkl
- os=-tops20
- ;;
- tower | tower-32)
- basic_machine=m68k-ncr
- ;;
- tpf)
- basic_machine=s390x-ibm
- os=-tpf
- ;;
- udi29k)
- basic_machine=a29k-amd
- os=-udi
- ;;
- ultra3)
- basic_machine=a29k-nyu
- os=-sym1
- ;;
- v810 | necv810)
- basic_machine=v810-nec
- os=-none
- ;;
- vaxv)
- basic_machine=vax-dec
- os=-sysv
- ;;
- vms)
- basic_machine=vax-dec
- os=-vms
- ;;
- vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
- vxworks960)
- basic_machine=i960-wrs
- os=-vxworks
- ;;
- vxworks68)
- basic_machine=m68k-wrs
- os=-vxworks
- ;;
- vxworks29k)
- basic_machine=a29k-wrs
- os=-vxworks
- ;;
- w65*)
- basic_machine=w65-wdc
- os=-none
- ;;
- w89k-*)
- basic_machine=hppa1.1-winbond
- os=-proelf
- ;;
- xbox)
- basic_machine=i686-pc
- os=-mingw32
- ;;
- xps | xps100)
- basic_machine=xps100-honeywell
- ;;
- ymp)
- basic_machine=ymp-cray
- os=-unicos
- ;;
- z8k-*-coff)
- basic_machine=z8k-unknown
- os=-sim
- ;;
- none)
- basic_machine=none-none
- os=-none
- ;;
-
-# Here we handle the default manufacturer of certain CPU types. It is in
-# some cases the only manufacturer, in others, it is the most popular.
- w89k)
- basic_machine=hppa1.1-winbond
- ;;
- op50n)
- basic_machine=hppa1.1-oki
- ;;
- op60c)
- basic_machine=hppa1.1-oki
- ;;
- romp)
- basic_machine=romp-ibm
- ;;
- mmix)
- basic_machine=mmix-knuth
- ;;
- rs6000)
- basic_machine=rs6000-ibm
- ;;
- vax)
- basic_machine=vax-dec
- ;;
- pdp10)
- # there are many clones, so DEC is not a safe bet
- basic_machine=pdp10-unknown
- ;;
- pdp11)
- basic_machine=pdp11-dec
- ;;
- we32k)
- basic_machine=we32k-att
- ;;
- sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele)
- basic_machine=sh-unknown
- ;;
- sh64)
- basic_machine=sh64-unknown
- ;;
- sparc | sparcv8 | sparcv9 | sparcv9b)
- basic_machine=sparc-sun
- ;;
- cydra)
- basic_machine=cydra-cydrome
- ;;
- orion)
- basic_machine=orion-highlevel
- ;;
- orion105)
- basic_machine=clipper-highlevel
- ;;
- mac | mpw | mac-mpw)
- basic_machine=m68k-apple
- ;;
- pmac | pmac-mpw)
- basic_machine=powerpc-apple
- ;;
- *-unknown)
- # Make sure to match an already-canonicalized machine name.
- ;;
- *)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
- *-digital*)
- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
- ;;
- *-commodore*)
- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
- ;;
- *)
- ;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
- # -solaris* is a basic system type, with this one exception.
- -solaris1 | -solaris1.*)
- os=`echo $os | sed -e 's|solaris1|sunos4|'`
- ;;
- -solaris)
- os=-solaris2
- ;;
- -svr4*)
- os=-sysv4
- ;;
- -unixware*)
- os=-sysv4.2uw
- ;;
- -gnu/linux*)
- os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
- ;;
- # First accept the basic system types.
- # The portable systems comes first.
- # Each alternative MUST END IN A *, to match a version number.
- # -sysv* is not here because it comes later, after sysvr4.
- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
- | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* \
- | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
- | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
- | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
- | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
- | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
- | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
- | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
- # Remember, each alternative MUST END IN *, to match a version number.
- ;;
- -qnx*)
- case $basic_machine in
- x86-* | i*86-*)
- ;;
- *)
- os=-nto$os
- ;;
- esac
- ;;
- -nto-qnx*)
- ;;
- -nto*)
- os=`echo $os | sed -e 's|nto|nto-qnx|'`
- ;;
- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
- | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
- ;;
- -mac*)
- os=`echo $os | sed -e 's|mac|macos|'`
- ;;
- -linux-dietlibc)
- os=-linux-dietlibc
- ;;
- -linux*)
- os=`echo $os | sed -e 's|linux|linux-gnu|'`
- ;;
- -sunos5*)
- os=`echo $os | sed -e 's|sunos5|solaris2|'`
- ;;
- -sunos6*)
- os=`echo $os | sed -e 's|sunos6|solaris3|'`
- ;;
- -opened*)
- os=-openedition
- ;;
- -os400*)
- os=-os400
- ;;
- -wince*)
- os=-wince
- ;;
- -osfrose*)
- os=-osfrose
- ;;
- -osf*)
- os=-osf
- ;;
- -utek*)
- os=-bsd
- ;;
- -dynix*)
- os=-bsd
- ;;
- -acis*)
- os=-aos
- ;;
- -atheos*)
- os=-atheos
- ;;
- -syllable*)
- os=-syllable
- ;;
- -386bsd)
- os=-bsd
- ;;
- -ctix* | -uts*)
- os=-sysv
- ;;
- -nova*)
- os=-rtmk-nova
- ;;
- -ns2 )
- os=-nextstep2
- ;;
- -nsk*)
- os=-nsk
- ;;
- # Preserve the version number of sinix5.
- -sinix5.*)
- os=`echo $os | sed -e 's|sinix|sysv|'`
- ;;
- -sinix*)
- os=-sysv4
- ;;
- -tpf*)
- os=-tpf
- ;;
- -triton*)
- os=-sysv3
- ;;
- -oss*)
- os=-sysv3
- ;;
- -svr4)
- os=-sysv4
- ;;
- -svr3)
- os=-sysv3
- ;;
- -sysvr4)
- os=-sysv4
- ;;
- # This must come after -sysvr4.
- -sysv*)
- ;;
- -ose*)
- os=-ose
- ;;
- -es1800*)
- os=-ose
- ;;
- -xenix)
- os=-xenix
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- os=-mint
- ;;
- -aros*)
- os=-aros
- ;;
- -kaos*)
- os=-kaos
- ;;
- -zvmoe)
- os=-zvmoe
- ;;
- -none)
- ;;
- *)
- # Get rid of the `-' at the beginning of $os.
- os=`echo $os | sed 's/[^-]*-//'`
- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
- exit 1
- ;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system. Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
- *-acorn)
- os=-riscix1.2
- ;;
- arm*-rebel)
- os=-linux
- ;;
- arm*-semi)
- os=-aout
- ;;
- c4x-* | tic4x-*)
- os=-coff
- ;;
- # This must come before the *-dec entry.
- pdp10-*)
- os=-tops20
- ;;
- pdp11-*)
- os=-none
- ;;
- *-dec | vax-*)
- os=-ultrix4.2
- ;;
- m68*-apollo)
- os=-domain
- ;;
- i386-sun)
- os=-sunos4.0.2
- ;;
- m68000-sun)
- os=-sunos3
- # This also exists in the configure program, but was not the
- # default.
- # os=-sunos4
- ;;
- m68*-cisco)
- os=-aout
- ;;
- mips*-cisco)
- os=-elf
- ;;
- mips*-*)
- os=-elf
- ;;
- or32-*)
- os=-coff
- ;;
- *-tti) # must be before sparc entry or we get the wrong os.
- os=-sysv3
- ;;
- sparc-* | *-sun)
- os=-sunos4.1.1
- ;;
- *-be)
- os=-beos
- ;;
- *-ibm)
- os=-aix
- ;;
- *-knuth)
- os=-mmixware
- ;;
- *-wec)
- os=-proelf
- ;;
- *-winbond)
- os=-proelf
- ;;
- *-oki)
- os=-proelf
- ;;
- *-hp)
- os=-hpux
- ;;
- *-hitachi)
- os=-hiux
- ;;
- i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
- os=-sysv
- ;;
- *-cbm)
- os=-amigaos
- ;;
- *-dg)
- os=-dgux
- ;;
- *-dolphin)
- os=-sysv3
- ;;
- m68k-ccur)
- os=-rtu
- ;;
- m88k-omron*)
- os=-luna
- ;;
- *-next )
- os=-nextstep
- ;;
- *-sequent)
- os=-ptx
- ;;
- *-crds)
- os=-unos
- ;;
- *-ns)
- os=-genix
- ;;
- i370-*)
- os=-mvs
- ;;
- *-next)
- os=-nextstep3
- ;;
- *-gould)
- os=-sysv
- ;;
- *-highlevel)
- os=-bsd
- ;;
- *-encore)
- os=-bsd
- ;;
- *-sgi)
- os=-irix
- ;;
- *-siemens)
- os=-sysv4
- ;;
- *-masscomp)
- os=-rtu
- ;;
- f30[01]-fujitsu | f700-fujitsu)
- os=-uxpv
- ;;
- *-rom68k)
- os=-coff
- ;;
- *-*bug)
- os=-coff
- ;;
- *-apple)
- os=-macos
- ;;
- *-atari*)
- os=-mint
- ;;
- *)
- os=-none
- ;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer. We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
- *-unknown)
- case $os in
- -riscix*)
- vendor=acorn
- ;;
- -sunos*)
- vendor=sun
- ;;
- -aix*)
- vendor=ibm
- ;;
- -beos*)
- vendor=be
- ;;
- -hpux*)
- vendor=hp
- ;;
- -mpeix*)
- vendor=hp
- ;;
- -hiux*)
- vendor=hitachi
- ;;
- -unos*)
- vendor=crds
- ;;
- -dgux*)
- vendor=dg
- ;;
- -luna*)
- vendor=omron
- ;;
- -genix*)
- vendor=ns
- ;;
- -mvs* | -opened*)
- vendor=ibm
- ;;
- -os400*)
- vendor=ibm
- ;;
- -ptx*)
- vendor=sequent
- ;;
- -tpf*)
- vendor=ibm
- ;;
- -vxsim* | -vxworks* | -windiss*)
- vendor=wrs
- ;;
- -aux*)
- vendor=apple
- ;;
- -hms*)
- vendor=hitachi
- ;;
- -mpw* | -macos*)
- vendor=apple
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- vendor=atari
- ;;
- -vos*)
- vendor=stratus
- ;;
- esac
- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
- ;;
-esac
-
-echo $basic_machine$os
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
+++ /dev/null
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59.
-#
-# Copyright (C) 2003 Free Software Foundation, Inc.
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
- /*)
- if ("$as_dir/$as_base" -c '
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
- sed '
- N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
- t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
- ' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
- # Exit status is that of the last command.
- exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
- as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-exec 6>&1
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_config_libobj_dir=.
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete. It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
-# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-
-ac_unique_file="elf2flt.c"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#if HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#if HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#if STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# if HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
-# include <memory.h>
-# endif
-# include <string.h>
-#endif
-#if HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#if HAVE_INTTYPES_H
-# include <inttypes.h>
-#else
-# if HAVE_STDINT_H
-# include <stdint.h>
-# endif
-#endif
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CPP EGREP bfd_include_dir binutils_include_dir binutils_ldscript_dir got_check emit_relocs LIBOBJS LTLIBOBJS'
-ac_subst_files=''
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-ac_prev=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval "$ac_prev=\$ac_option"
- ac_prev=
- continue
- fi
-
- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_option in
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
- | --da=*)
- datadir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- eval "enable_$ac_feature=no" ;;
-
- -enable-* | --enable-*)
- ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
- eval "enable_$ac_feature='$ac_optarg'" ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst \
- | --locals | --local | --loca | --loc | --lo)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
- eval "with_$ac_package='$ac_optarg'" ;;
-
- -without-* | --without-*)
- ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/-/_/g'`
- eval "with_$ac_package=no" ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; }
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
- eval "$ac_envvar='$ac_optarg'"
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { echo "$as_me: error: missing argument to $ac_option" >&2
- { (exit 1); exit 1; }; }
-fi
-
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
- eval ac_val=$`echo $ac_var`
- case $ac_val in
- [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
- localstatedir libdir includedir oldincludedir infodir mandir
-do
- eval ac_val=$`echo $ac_var`
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) ;;
- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used." >&2
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then its parent.
- ac_confdir=`(dirname "$0") 2>/dev/null ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$0" : 'X\(//\)[^/]' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$0" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r $srcdir/$ac_unique_file; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
- if test "$ac_srcdir_defaulted" = yes; then
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
- { (exit 1); exit 1; }; }
- else
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
- { (exit 1); exit 1; }; }
- fi
-fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
- { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-_ACEOF
-
- cat <<_ACEOF
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --datadir=DIR read-only architecture-independent data [PREFIX/share]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --infodir=DIR info documentation [PREFIX/info]
- --mandir=DIR man documentation [PREFIX/man]
-_ACEOF
-
- cat <<\_ACEOF
-
-System types:
- --build=BUILD configure for building on BUILD [guessed]
- --host=HOST cross-compile to build programs to run on HOST [BUILD]
- --target=TARGET configure for building compilers for TARGET [HOST]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-
- cat <<\_ACEOF
-
-Optional Features:
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --disable-got-check - disable check for GOT (needed on H8)
- --disable-emit-relocs - don't use the --emit-relocs (-q) linker option
-
-Optional Packages:
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-libbfd=<file> path to libbfd.a library to use
- --with-libiberty=<file> path to libiberty.a library to use
- --with-bfd-include-dir=<dir> include path for correct bfd.h
- --with-binutils-include-dir=<dir> include path for binutils headers
- --with-binutils-ldscript-dir=<dir> path to install elf2flt.ld
-
-Some influential environment variables:
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
- headers in a nonstandard directory <include dir>
- CPP C preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-_ACEOF
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- ac_popdir=`pwd`
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d $ac_dir || continue
- ac_builddir=.
-
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
-
- cd $ac_dir
- # Check for guested configure; otherwise get Cygnus style configure.
- if test -f $ac_srcdir/configure.gnu; then
- echo
- $SHELL $ac_srcdir/configure.gnu --help=recursive
- elif test -f $ac_srcdir/configure; then
- echo
- $SHELL $ac_srcdir/configure --help=recursive
- elif test -f $ac_srcdir/configure.ac ||
- test -f $ac_srcdir/configure.in; then
- echo
- $ac_configure --help
- else
- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi
- cd $ac_popdir
- done
-fi
-
-test -n "$ac_init_help" && exit 0
-if $ac_init_version; then
- cat <<\_ACEOF
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
- exit 0
-fi
-exec 5>config.log
-cat >&5 <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by $as_me, which was
-generated by GNU Autoconf 2.59. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- echo "PATH: $as_dir"
-done
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_sep=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
- 2)
- ac_configure_args1="$ac_configure_args1 '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
- # Get rid of the leading space.
- ac_sep=" "
- ;;
- esac
- done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
- echo
- # The following way of writing the cache mishandles newlines in values,
-{
- (set) 2>&1 |
- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- sed -n \
- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
- ;;
- *)
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
- ;;
- esac;
-}
- echo
-
- cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=$`echo $ac_var`
- echo "$ac_var='"'"'$ac_val'"'"'"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=$`echo $ac_var`
- echo "$ac_var='"'"'$ac_val'"'"'"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
- echo
- sed "/^$/d" confdefs.h | sort
- echo
- fi
- test "$ac_signal" != 0 &&
- echo "$as_me: caught signal $ac_signal"
- echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core &&
- rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
- ' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
-fi
-for ac_site_file in $CONFIG_SITE; do
- if test -r "$ac_site_file"; then
- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . $cache_file;;
- *) . ./$cache_file;;
- esac
- fi
-else
- { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val="\$ac_cv_env_${ac_var}_value"
- eval ac_new_val="\$ac_env_${ac_var}_value"
- case $ac_old_set,$ac_new_set in
- set,)
- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-echo "$as_me: former value: $ac_old_val" >&2;}
- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-echo "$as_me: current value: $ac_new_val" >&2;}
- ac_cache_corrupted=:
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# Check whether --with-libbfd or --without-libbfd was given.
-if test "${with_libbfd+set}" = set; then
- withval="$with_libbfd"
- ac_libbfd=$withval
-else
- ac_libbfd=NONE
-
-fi;
-
-
-# Check whether --with-libiberty or --without-libiberty was given.
-if test "${with_libiberty+set}" = set; then
- withval="$with_libiberty"
- ac_libiberty=$withval
-else
- ac_libiberty=NONE
-
-fi;
-
-
-# Check whether --with-bfd-include-dir or --without-bfd-include-dir was given.
-if test "${with_bfd_include_dir+set}" = set; then
- withval="$with_bfd_include_dir"
- ac_bfd_include_dir=$withval
-else
- ac_bfd_include_dir=NONE
-
-fi;
-
-
-# Check whether --with-binutils-include-dir or --without-binutils-include-dir was given.
-if test "${with_binutils_include_dir+set}" = set; then
- withval="$with_binutils_include_dir"
- ac_binutils_include_dir=$withval
-else
- ac_binutils_include_dir=NONE
-
-fi;
-
-
-# Check whether --with-binutils-ldscript-dir or --without-binutils-ldscript-dir was given.
-if test "${with_binutils_ldscript_dir+set}" = set; then
- withval="$with_binutils_ldscript_dir"
- ac_binutils_ldscript_dir=$withval
-else
- ac_binutils_ldscript_dir=NONE
-
-fi;
-
-# Check whether --enable-got-check or --disable-got-check was given.
-if test "${enable_got_check+set}" = set; then
- enableval="$enable_got_check"
- got_check=$enableval
-else
- got_check=yes
-
-fi;
-
-# Check whether --enable-emit_relocs or --disable-emit_relocs was given.
-if test "${enable_emit_relocs+set}" = set; then
- enableval="$enable_emit_relocs"
- emit_relocs=$enableval
-else
- emit_relocs=yes
-
-fi;
-
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
-
-# Make sure we can run config.sub.
-$ac_config_sub sun4 >/dev/null 2>&1 ||
- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
-echo "$as_me: error: cannot run $ac_config_sub" >&2;}
- { (exit 1); exit 1; }; }
-
-echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6
-if test "${ac_cv_build+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_build_alias=$build_alias
-test -z "$ac_cv_build_alias" &&
- ac_cv_build_alias=`$ac_config_guess`
-test -z "$ac_cv_build_alias" &&
- { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
- { (exit 1); exit 1; }; }
-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6
-build=$ac_cv_build
-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-
-echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6
-if test "${ac_cv_host+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_host_alias=$host_alias
-test -z "$ac_cv_host_alias" &&
- ac_cv_host_alias=$ac_cv_build_alias
-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6
-host=$ac_cv_host
-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-
-echo "$as_me:$LINENO: checking target system type" >&5
-echo $ECHO_N "checking target system type... $ECHO_C" >&6
-if test "${ac_cv_target+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_target_alias=$target_alias
-test "x$ac_cv_target_alias" = "x" &&
- ac_cv_target_alias=$ac_cv_host_alias
-ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_target" >&5
-echo "${ECHO_T}$ac_cv_target" >&6
-target=$ac_cv_target
-target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-test -n "$target_alias" &&
- test "$program_prefix$program_suffix$program_transform_name" = \
- NONENONEs,x,x, &&
- program_prefix=${target_alias}-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- CC=$ac_ct_CC
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- CC=$ac_ct_CC
-else
- CC="$ac_cv_prog_CC"
-fi
-
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$ac_ct_CC" && break
-done
-
- CC=$ac_ct_CC
-fi
-
-fi
-
-
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
- "checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
- (eval $ac_compiler --version </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
- (eval $ac_compiler -v </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
- (eval $ac_compiler -V </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
- (eval $ac_link_default) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Find the output, starting from the most likely. This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
-do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
- ;;
- conftest.$ac_ext )
- # This is the source file.
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- # FIXME: I believe we export ac_cv_exeext for Libtool,
- # but it would be cool to find out if it's true. Does anybody
- # maintain Libtool? --akim.
- export ac_cv_exeext
- break;;
- * )
- break;;
- esac
-done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
-
-# Check the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
- if { ac_try='./$ac_file'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
- fi
- fi
-fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- export ac_cv_exeext
- break;;
- * ) break;;
- esac
-done
-else
- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-if test "${ac_cv_objext+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_compiler_gnu=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_prog_cc_g=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_prog_cc_stdc=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std1 is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std1. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX -qlanglvl=ansi
-# Ultrix and OSF/1 -std1
-# HP-UX 10.20 and later -Ae
-# HP-UX older versions -Aa -D_HPUX_SOURCE
-# SVR4 -Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_stdc=$ac_arg
-break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext
-done
-rm -f conftest.$ac_ext conftest.$ac_objext
-CC=$ac_save_CC
-
-fi
-
-case "x$ac_cv_prog_cc_stdc" in
- x|xno)
- echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
- *)
- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
- CC="$CC $ac_cv_prog_cc_stdc" ;;
-esac
-
-# Some people use a C++ compiler to compile C. Since we use `exit',
-# in C++ we need to declare it. In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
- choke me
-#endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- for ac_declaration in \
- '' \
- 'extern "C" void std::exit (int) throw (); using std::exit;' \
- 'extern "C" void std::exit (int); using std::exit;' \
- 'extern "C" void exit (int) throw ();' \
- 'extern "C" void exit (int);' \
- 'void exit (int);'
-do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_declaration
-#include <stdlib.h>
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-continue
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_declaration
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
- echo '#ifdef __cplusplus' >>confdefs.h
- echo $ac_declaration >>confdefs.h
- echo '#endif' >>confdefs.h
-fi
-
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
- ./ | .// | /cC/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- done
- done
- ;;
-esac
-done
-
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL=$ac_install_sh
- fi
-fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-if test "$ac_libiberty" = "NONE"; then
-
-
-echo "$as_me:$LINENO: checking for objalloc_create in -liberty" >&5
-echo $ECHO_N "checking for objalloc_create in -liberty... $ECHO_C" >&6
-if test "${ac_cv_lib_iberty_objalloc_create+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-liberty $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char objalloc_create ();
-int
-main ()
-{
-objalloc_create ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_iberty_objalloc_create=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_iberty_objalloc_create=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_iberty_objalloc_create" >&5
-echo "${ECHO_T}$ac_cv_lib_iberty_objalloc_create" >&6
-if test $ac_cv_lib_iberty_objalloc_create = yes; then
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBIBERTY 1
-_ACEOF
-
- LIBS="-liberty $LIBS"
-
-fi
-
- ac_libiberty=auto
-else
- LIBS="$ac_libiberty $LIBS"
-fi
-if test "$ac_libbfd" = "NONE"; then
-
-echo "$as_me:$LINENO: checking for bfd_openr in -lbfd" >&5
-echo $ECHO_N "checking for bfd_openr in -lbfd... $ECHO_C" >&6
-if test "${ac_cv_lib_bfd_bfd_openr+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lbfd $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char bfd_openr ();
-int
-main ()
-{
-bfd_openr ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_lib_bfd_bfd_openr=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_lib_bfd_bfd_openr=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_bfd_bfd_openr" >&5
-echo "${ECHO_T}$ac_cv_lib_bfd_bfd_openr" >&6
-if test $ac_cv_lib_bfd_bfd_openr = yes; then
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBBFD 1
-_ACEOF
-
- LIBS="-lbfd $LIBS"
-
-fi
-
- ac_libbfd=auto
-else
- LIBS="$ac_libbfd $LIBS"
-fi
-
-bfd_include_dir=
-if test "$ac_bfd_include_dir" != "NONE"; then
- bfd_include_dir="-I$ac_bfd_include_dir"
-fi
-
-binutils_include_dir=
-if test "$ac_binutils_include_dir" != "NONE"; then
- binutils_include_dir="-I$ac_binutils_include_dir"
-fi
-
-binutils_ldscript_dir=
-if test "$ac_binutils_ldscript_dir" = "NONE"; then
- ac_binutils_ldscript_dir="\${TOOLDIR}/../${target_alias}/lib"
-fi
-binutils_ldscript_dir="$ac_binutils_ldscript_dir"
-
-if test "$ac_libbfd" = "NONE" -o "$ac_libiberty" = "NONE" ; then
- { { echo "$as_me:$LINENO: error:
-
-You need to specify the location of the libfd.a and libiberty.a
-host libraries from the binutils package.
-
-Run configure again specifying these options:
-
- ./configure --target=<ARCH> --with-bfd-include-dir=<dir> --with-libbfd=<libbfd.a> --with-libiberty=<libiberty.a>
-" >&5
-echo "$as_me: error:
-
-You need to specify the location of the libfd.a and libiberty.a
-host libraries from the binutils package.
-
-Run configure again specifying these options:
-
- ./configure --target=<ARCH> --with-bfd-include-dir=<dir> --with-libbfd=<libbfd.a> --with-libiberty=<libiberty.a>
-" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-if test "$ac_bfd_include_dir" = "NONE" ; then
- { { echo "$as_me:$LINENO: error:
-
-You need to specify the location of the bfd.h header from a
-configured/compiled version of the binutils package for your target.
-Without this your elf2flt may crash as it will try to use the
-systems bfd.h which may be from a different binutils package.
-
-Run configure again specifying these options:
-
- ./configure --target=<ARCH> --with-bfd-include-dir=<dir> --with-libbfd=<libbfd.a> --with-libiberty=<libiberty.a>
-" >&5
-echo "$as_me: error:
-
-You need to specify the location of the bfd.h header from a
-configured/compiled version of the binutils package for your target.
-Without this your elf2flt may crash as it will try to use the
-systems bfd.h which may be from a different binutils package.
-
-Run configure again specifying these options:
-
- ./configure --target=<ARCH> --with-bfd-include-dir=<dir> --with-libbfd=<libbfd.a> --with-libiberty=<libiberty.a>
-" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if test "${ac_cv_prog_CPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether non-existent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether non-existent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
-else
- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if echo a | (grep -E '(a|b)') >/dev/null 2>&1
- then ac_cv_prog_egrep='grep -E'
- else ac_cv_prog_egrep='egrep'
- fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
-
-
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-if test "${ac_cv_header_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_stdc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_header_stdc=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
- :
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ctype.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- exit(2);
- exit (0);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_Header=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_Header=no"
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-
-
-for ac_header in fcntl.h unistd.h bfd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
- # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_header_compiler=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- ac_header_preproc=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
- yes:no: )
- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
- ac_header_preproc=yes
- ;;
- no:yes:* )
- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
- { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- (
- cat <<\_ASBOX
-## ------------------------------------------ ##
-## Report this to the AC_PACKAGE_NAME lists. ##
-## ------------------------------------------ ##
-_ASBOX
- ) |
- sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- eval "$as_ac_Header=\$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
-echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
-if test "${ac_cv_c_const+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-/* FIXME: Include the comments suggested by Paul. */
-#ifndef __cplusplus
- /* Ultrix mips cc rejects this. */
- typedef int charset[2];
- const charset x;
- /* SunOS 4.1.1 cc rejects this. */
- char const *const *ccp;
- char **p;
- /* NEC SVR4.0.2 mips cc rejects this. */
- struct point {int x, y;};
- static struct point const zero = {0,0};
- /* AIX XL C 1.02.0.0 rejects this.
- It does not let you subtract one const X* pointer from another in
- an arm of an if-expression whose if-part is not a constant
- expression */
- const char *g = "string";
- ccp = &g + (g ? g-g : 0);
- /* HPUX 7.0 cc rejects these. */
- ++ccp;
- p = (char**) ccp;
- ccp = (char const *const *) p;
- { /* SCO 3.2v4 cc rejects this. */
- char *t;
- char const *s = 0 ? (char *) 0 : (char const *) 0;
-
- *t++ = 0;
- }
- { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
- int x[] = {25, 17};
- const int *foo = &x[0];
- ++foo;
- }
- { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
- typedef const int *iptr;
- iptr p = 0;
- ++p;
- }
- { /* AIX XL C 1.02.0.0 rejects this saying
- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
- struct s { int j; const int *ap[3]; };
- struct s *b; b->j = 5;
- }
- { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
- const int foo = 10;
- }
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_c_const=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_c_const=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
-echo "${ECHO_T}$ac_cv_c_const" >&6
-if test $ac_cv_c_const = no; then
-
-cat >>confdefs.h <<\_ACEOF
-#define const
-_ACEOF
-
-fi
-
-
-
-for ac_func in vprintf
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-echo "$as_me:$LINENO: checking for _doprnt" >&5
-echo $ECHO_N "checking for _doprnt... $ECHO_C" >&6
-if test "${ac_cv_func__doprnt+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define _doprnt to an innocuous variant, in case <limits.h> declares _doprnt.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define _doprnt innocuous__doprnt
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char _doprnt (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef _doprnt
-
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char _doprnt ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub__doprnt) || defined (__stub____doprnt)
-choke me
-#else
-char (*f) () = _doprnt;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != _doprnt;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_func__doprnt=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_func__doprnt=no
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5
-echo "${ECHO_T}$ac_cv_func__doprnt" >&6
-if test $ac_cv_func__doprnt = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DOPRNT 1
-_ACEOF
-
-fi
-
-fi
-done
-
-
-
-
-for ac_func in dcgettext
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-
-
-
-
-
-
-
-
-
-
-
- ac_config_files="$ac_config_files Makefile ld-elf2flt"
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-{
- (set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
- ;;
- esac;
-} |
- sed '
- t clear
- : clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
- if test -w $cache_file; then
- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
- cat confcache >$cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[ ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[ ]*$//;
-}'
-fi
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section. Otherwise,
-# look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
-t clear
-: clear
-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
-t quote
-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
-t quote
-d
-: quote
-s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output. A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
-
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_i=`echo "$ac_i" |
- sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
- # 2. Add them.
- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-
-: ${CONFIG_STATUS=./config.status}
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
- /*)
- if ("$as_dir/$as_base" -c '
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
- sed '
- N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
- t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
- ' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
- # Exit status is that of the last command.
- exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
- as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling. Logging --version etc. is OK.
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.59. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
-_ACEOF
-
-# Files that config.status was made for.
-if test -n "$ac_config_files"; then
- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_headers"; then
- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_links"; then
- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_commands"; then
- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
- -h, --help print this help, then exit
- -V, --version print version number, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
-
-Configuration files:
-$config_files
-
-Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-ac_cs_version="\\
-config.status
-configured by $0, generated by GNU Autoconf 2.59,
- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value. By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=*)
- ac_option=`expr "x$1" : 'x\([^=]*\)='`
- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- -*)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- *) # This is not an option, so the user has probably given explicit
- # arguments.
- ac_option=$1
- ac_need_defaults=false;;
- esac
-
- case $ac_option in
- # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --vers* | -V )
- echo "$ac_cs_version"; exit 0 ;;
- --he | --h)
- # Conflict between --help and --header
- { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- echo "$ac_cs_usage"; exit 0 ;;
- --debug | --d* | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
- ac_need_defaults=false;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; } ;;
-
- *) ac_config_targets="$ac_config_targets $1" ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-if \$ac_cs_recheck; then
- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-fi
-
-_ACEOF
-
-
-
-
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_config_target in $ac_config_targets
-do
- case "$ac_config_target" in
- # Handling of arguments.
- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "ld-elf2flt" ) CONFIG_FILES="$CONFIG_FILES ld-elf2flt" ;;
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
-} ||
-{
- tmp=./confstat$$-$RANDOM
- (umask 077 && mkdir $tmp)
-} ||
-{
- echo "$me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
- # Protect against being on the right side of a sed subst in config.status.
- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@build@,$build,;t t
-s,@build_cpu@,$build_cpu,;t t
-s,@build_vendor@,$build_vendor,;t t
-s,@build_os@,$build_os,;t t
-s,@host@,$host,;t t
-s,@host_cpu@,$host_cpu,;t t
-s,@host_vendor@,$host_vendor,;t t
-s,@host_os@,$host_os,;t t
-s,@target@,$target,;t t
-s,@target_cpu@,$target_cpu,;t t
-s,@target_vendor@,$target_vendor,;t t
-s,@target_os@,$target_os,;t t
-s,@CC@,$CC,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@CPP@,$CPP,;t t
-s,@EGREP@,$EGREP,;t t
-s,@bfd_include_dir@,$bfd_include_dir,;t t
-s,@binutils_include_dir@,$binutils_include_dir,;t t
-s,@binutils_ldscript_dir@,$binutils_ldscript_dir,;t t
-s,@got_check@,$got_check,;t t
-s,@emit_relocs@,$emit_relocs,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
-
-_ACEOF
-
- cat >>$CONFIG_STATUS <<\_ACEOF
- # Split the substitutions into bite-sized pieces for seds with
- # small command number limits, like on Digital OSF/1 and HP-UX.
- ac_max_sed_lines=48
- ac_sed_frag=1 # Number of current file.
- ac_beg=1 # First line for current file.
- ac_end=$ac_max_sed_lines # Line after last line for current file.
- ac_more_lines=:
- ac_sed_cmds=
- while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- else
- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- fi
- if test ! -s $tmp/subs.frag; then
- ac_more_lines=false
- else
- # The purpose of the label and of the branching condition is to
- # speed up the sed processing (if there are no `@' at all, there
- # is no need to browse any of the substitutions).
- # These are the two extra sed commands mentioned above.
- (echo ':t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
- fi
- ac_sed_frag=`expr $ac_sed_frag + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_lines`
- fi
- done
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
- fi
-fi # test -n "$CONFIG_FILES"
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
- esac
-
- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
- ac_builddir=.
-
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
-
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
- esac
-
- if test x"$ac_file" != x-; then
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- rm -f "$ac_file"
- fi
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- if test x"$ac_file" = x-; then
- configure_input=
- else
- configure_input="$ac_file. "
- fi
- configure_input=$configure_input"Generated from `echo $ac_file_in |
- sed 's,.*/,,'` by configure."
-
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- echo "$f";;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo "$f"
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo "$srcdir/$f"
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
- sed "$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
- rm -f $tmp/stdin
- if test x"$ac_file" != x-; then
- mv $tmp/out $ac_file
- else
- cat $tmp/out
- rm -f $tmp/out
- fi
-
-done
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-{ (exit 0); exit 0; }
-_ACEOF
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || { (exit 1); exit 1; }
-fi
-
-
+++ /dev/null
-dnl Process this file with autoconf to produce a configure script.
-AC_INIT(elf2flt.c)
-
-AC_ARG_WITH(libbfd,
- [ --with-libbfd=<file> path to libbfd.a library to use ],
- [ ac_libbfd=$withval ],
- [ ac_libbfd=NONE ]
-)
-
-AC_ARG_WITH(libiberty,
- [ --with-libiberty=<file> path to libiberty.a library to use ],
- [ ac_libiberty=$withval ],
- [ ac_libiberty=NONE ]
-)
-
-AC_ARG_WITH(bfd-include-dir,
- [ --with-bfd-include-dir=<dir> include path for correct bfd.h ],
- [ ac_bfd_include_dir=$withval ],
- [ ac_bfd_include_dir=NONE ]
-)
-
-AC_ARG_WITH(binutils-include-dir,
- [ --with-binutils-include-dir=<dir> include path for binutils headers ],
- [ ac_binutils_include_dir=$withval ],
- [ ac_binutils_include_dir=NONE ]
-)
-
-AC_ARG_WITH(binutils-ldscript-dir,
- [ --with-binutils-ldscript-dir=<dir> path to install elf2flt.ld ],
- [ ac_binutils_ldscript_dir=$withval ],
- [ ac_binutils_ldscript_dir=NONE ]
-)
-
-AC_ARG_ENABLE(got-check,
- [ --disable-got-check - disable check for GOT (needed on H8) ],
- [ got_check=$enableval ],
- [ got_check=yes ]
-)
-
-AC_ARG_ENABLE(emit_relocs,
- [ --disable-emit-relocs - don't use the --emit-relocs (-q) linker option ],
- [ emit_relocs=$enableval ],
- [ emit_relocs=yes ]
-)
-
-AC_CANONICAL_HOST
-AC_CANONICAL_TARGET
-
-dnl Checks for programs.
-AC_PROG_CC
-AC_PROG_INSTALL
-
-dnl Checks for libraries.
-if test "$ac_libiberty" = "NONE"; then
- AC_CHECK_LIB(iberty, objalloc_create)
- ac_libiberty=auto
-else
- LIBS="$ac_libiberty $LIBS"
-fi
-if test "$ac_libbfd" = "NONE"; then
- AC_CHECK_LIB(bfd, bfd_openr)
- ac_libbfd=auto
-else
- LIBS="$ac_libbfd $LIBS"
-fi
-
-bfd_include_dir=
-if test "$ac_bfd_include_dir" != "NONE"; then
- bfd_include_dir="-I$ac_bfd_include_dir"
-fi
-
-binutils_include_dir=
-if test "$ac_binutils_include_dir" != "NONE"; then
- binutils_include_dir="-I$ac_binutils_include_dir"
-fi
-
-binutils_ldscript_dir=
-if test "$ac_binutils_ldscript_dir" = "NONE"; then
- ac_binutils_ldscript_dir="\${TOOLDIR}/../${target_alias}/lib"
-fi
-binutils_ldscript_dir="$ac_binutils_ldscript_dir"
-
-if test "$ac_libbfd" = "NONE" -o "$ac_libiberty" = "NONE" ; then
- AC_MSG_ERROR([
-
-You need to specify the location of the libfd.a and libiberty.a
-host libraries from the binutils package.
-
-Run configure again specifying these options:
-
- ./configure --target=<ARCH> --with-bfd-include-dir=<dir> --with-libbfd=<libbfd.a> --with-libiberty=<libiberty.a>
-])
-fi
-
-if test "$ac_bfd_include_dir" = "NONE" ; then
- AC_MSG_ERROR([
-
-You need to specify the location of the bfd.h header from a
-configured/compiled version of the binutils package for your target.
-Without this your elf2flt may crash as it will try to use the
-systems bfd.h which may be from a different binutils package.
-
-Run configure again specifying these options:
-
- ./configure --target=<ARCH> --with-bfd-include-dir=<dir> --with-libbfd=<libbfd.a> --with-libiberty=<libiberty.a>
-])
-fi
-
-dnl Checks for header files.
-AC_HEADER_STDC
-AC_CHECK_HEADERS(fcntl.h unistd.h bfd.h)
-
-dnl Checks for typedefs, structures, and compiler characteristics.
-AC_C_CONST
-
-dnl Checks for library functions.
-AC_FUNC_VPRINTF
-
-AC_CHECK_FUNCS(dcgettext)
-
-dnl Subsitute values
-AC_SUBST(target)
-AC_SUBST(target_alias)
-AC_SUBST(target_cpu)
-AC_SUBST(target_os)
-AC_SUBST(target_vendor)
-AC_SUBST(bfd_include_dir)
-AC_SUBST(binutils_include_dir)
-AC_SUBST(binutils_ldscript_dir)
-AC_SUBST(got_check)
-AC_SUBST(emit_relocs)
-
-AC_OUTPUT(Makefile ld-elf2flt)
-
+++ /dev/null
-/* This file defines standard ELF types, structures, and macros.
- Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
-
- The GNU C Library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
-
- The GNU C Library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with the GNU C Library; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
- 02111-1307 USA. */
-
-#ifndef _ELF_H
-#define _ELF_H 1
-
-#if defined(__MINGW32__)
-#include <stdint.h>
-typedef uint16_t u_int16_t;
-typedef uint32_t u_int32_t;
-typedef uint64_t u_int64_t;
-#else
-#include <features.h>
-#endif
-/* Standard ELF types. */
-
-#include <sys/types.h>
-
-/* Type for a 16-bit quantity. */
-typedef u_int16_t Elf32_Half;
-typedef u_int16_t Elf64_Half;
-
-/* Types for signed and unsigned 32-bit quantities. */
-typedef u_int32_t Elf32_Word;
-typedef int32_t Elf32_Sword;
-typedef u_int32_t Elf64_Word;
-typedef int32_t Elf64_Sword;
-
-/* Types for signed and unsigned 64-bit quantities. */
-typedef u_int64_t Elf32_Xword;
-typedef int64_t Elf32_Sxword;
-typedef u_int64_t Elf64_Xword;
-typedef int64_t Elf64_Sxword;
-
-/* Type of addresses. */
-typedef u_int32_t Elf32_Addr;
-typedef u_int64_t Elf64_Addr;
-
-/* Type of file offsets. */
-typedef u_int32_t Elf32_Off;
-typedef u_int64_t Elf64_Off;
-
-/* Type for section indices, which are 16-bit quantities. */
-typedef u_int16_t Elf32_Section;
-typedef u_int16_t Elf64_Section;
-
-/* Type for version symbol information. */
-typedef Elf32_Half Elf32_Versym;
-typedef Elf64_Half Elf64_Versym;
-
-
-/* The ELF file header. This appears at the start of every ELF file. */
-
-#define EI_NIDENT (16)
-
-typedef struct
-{
- unsigned char e_ident[EI_NIDENT]; /* Magic number and other info */
- Elf32_Half e_type; /* Object file type */
- Elf32_Half e_machine; /* Architecture */
- Elf32_Word e_version; /* Object file version */
- Elf32_Addr e_entry; /* Entry point virtual address */
- Elf32_Off e_phoff; /* Program header table file offset */
- Elf32_Off e_shoff; /* Section header table file offset */
- Elf32_Word e_flags; /* Processor-specific flags */
- Elf32_Half e_ehsize; /* ELF header size in bytes */
- Elf32_Half e_phentsize; /* Program header table entry size */
- Elf32_Half e_phnum; /* Program header table entry count */
- Elf32_Half e_shentsize; /* Section header table entry size */
- Elf32_Half e_shnum; /* Section header table entry count */
- Elf32_Half e_shstrndx; /* Section header string table index */
-} Elf32_Ehdr;
-
-typedef struct
-{
- unsigned char e_ident[EI_NIDENT]; /* Magic number and other info */
- Elf64_Half e_type; /* Object file type */
- Elf64_Half e_machine; /* Architecture */
- Elf64_Word e_version; /* Object file version */
- Elf64_Addr e_entry; /* Entry point virtual address */
- Elf64_Off e_phoff; /* Program header table file offset */
- Elf64_Off e_shoff; /* Section header table file offset */
- Elf64_Word e_flags; /* Processor-specific flags */
- Elf64_Half e_ehsize; /* ELF header size in bytes */
- Elf64_Half e_phentsize; /* Program header table entry size */
- Elf64_Half e_phnum; /* Program header table entry count */
- Elf64_Half e_shentsize; /* Section header table entry size */
- Elf64_Half e_shnum; /* Section header table entry count */
- Elf64_Half e_shstrndx; /* Section header string table index */
-} Elf64_Ehdr;
-
-/* Fields in the e_ident array. The EI_* macros are indices into the
- array. The macros under each EI_* macro are the values the byte
- may have. */
-
-#define EI_MAG0 0 /* File identification byte 0 index */
-#define ELFMAG0 0x7f /* Magic number byte 0 */
-
-#define EI_MAG1 1 /* File identification byte 1 index */
-#define ELFMAG1 'E' /* Magic number byte 1 */
-
-#define EI_MAG2 2 /* File identification byte 2 index */
-#define ELFMAG2 'L' /* Magic number byte 2 */
-
-#define EI_MAG3 3 /* File identification byte 3 index */
-#define ELFMAG3 'F' /* Magic number byte 3 */
-
-/* Conglomeration of the identification bytes, for easy testing as a word. */
-#define ELFMAG "\177ELF"
-#define SELFMAG 4
-
-#define EI_CLASS 4 /* File class byte index */
-#define ELFCLASSNONE 0 /* Invalid class */
-#define ELFCLASS32 1 /* 32-bit objects */
-#define ELFCLASS64 2 /* 64-bit objects */
-#define ELFCLASSNUM 3
-
-#define EI_DATA 5 /* Data encoding byte index */
-#define ELFDATANONE 0 /* Invalid data encoding */
-#define ELFDATA2LSB 1 /* 2's complement, little endian */
-#define ELFDATA2MSB 2 /* 2's complement, big endian */
-#define ELFDATANUM 3
-
-#define EI_VERSION 6 /* File version byte index */
- /* Value must be EV_CURRENT */
-
-#define EI_OSABI 7 /* OS ABI identification */
-#define ELFOSABI_SYSV 0 /* UNIX System V ABI */
-#define ELFOSABI_HPUX 1 /* HP-UX */
-#define ELFOSABI_ARM 97 /* ARM */
-#define ELFOSABI_STANDALONE 255 /* Standalone (embedded) application */
-
-#define EI_ABIVERSION 8 /* ABI version */
-
-#define EI_PAD 9 /* Byte index of padding bytes */
-
-/* Legal values for e_type (object file type). */
-
-#define ET_NONE 0 /* No file type */
-#define ET_REL 1 /* Relocatable file */
-#define ET_EXEC 2 /* Executable file */
-#define ET_DYN 3 /* Shared object file */
-#define ET_CORE 4 /* Core file */
-#define ET_NUM 5 /* Number of defined types */
-#define ET_LOOS 0xfe00 /* OS-specific range start */
-#define ET_HIOS 0xfeff /* OS-specific range end */
-#define ET_LOPROC 0xff00 /* Processor-specific range start */
-#define ET_HIPROC 0xffff /* Processor-specific range end */
-
-/* Legal values for e_machine (architecture). */
-
-#define EM_NONE 0 /* No machine */
-#define EM_M32 1 /* AT&T WE 32100 */
-#define EM_SPARC 2 /* SUN SPARC */
-#define EM_386 3 /* Intel 80386 */
-#define EM_68K 4 /* Motorola m68k family */
-#define EM_88K 5 /* Motorola m88k family */
-#define EM_860 7 /* Intel 80860 */
-#define EM_MIPS 8 /* MIPS R3000 big-endian */
-#define EM_S370 9 /* IBM System/370 */
-#define EM_MIPS_RS3_LE 10 /* MIPS R3000 little-endian */
-
-#define EM_PARISC 15 /* HPPA */
-#define EM_VPP500 17 /* Fujitsu VPP500 */
-#define EM_SPARC32PLUS 18 /* Sun's "v8plus" */
-#define EM_960 19 /* Intel 80960 */
-#define EM_PPC 20 /* PowerPC */
-#define EM_PPC64 21 /* PowerPC 64-bit */
-#define EM_S390 22 /* IBM S390 */
-
-#define EM_V800 36 /* NEC V800 series */
-#define EM_FR20 37 /* Fujitsu FR20 */
-#define EM_RH32 38 /* TRW RH-32 */
-#define EM_RCE 39 /* Motorola RCE */
-#define EM_ARM 40 /* ARM */
-#define EM_FAKE_ALPHA 41 /* Digital Alpha */
-#define EM_SH 42 /* Hitachi SH */
-#define EM_SPARCV9 43 /* SPARC v9 64-bit */
-#define EM_TRICORE 44 /* Siemens Tricore */
-#define EM_ARC 45 /* Argonaut RISC Core */
-#define EM_H8_300 46 /* Hitachi H8/300 */
-#define EM_H8_300H 47 /* Hitachi H8/300H */
-#define EM_H8S 48 /* Hitachi H8S */
-#define EM_H8_500 49 /* Hitachi H8/500 */
-#define EM_IA_64 50 /* Intel Merced */
-#define EM_MIPS_X 51 /* Stanford MIPS-X */
-#define EM_COLDFIRE 52 /* Motorola Coldfire */
-#define EM_68HC12 53 /* Motorola M68HC12 */
-#define EM_MMA 54 /* Fujitsu MMA Multimedia Accelerator*/
-#define EM_PCP 55 /* Siemens PCP */
-#define EM_NCPU 56 /* Sony nCPU embeeded RISC */
-#define EM_NDR1 57 /* Denso NDR1 microprocessor */
-#define EM_STARCORE 58 /* Motorola Start*Core processor */
-#define EM_ME16 59 /* Toyota ME16 processor */
-#define EM_ST100 60 /* STMicroelectronic ST100 processor */
-#define EM_TINYJ 61 /* Advanced Logic Corp. Tinyj emb.fam*/
-#define EM_X86_64 62 /* AMD x86-64 architecture */
-#define EM_PDSP 63 /* Sony DSP Processor */
-
-#define EM_FX66 66 /* Siemens FX66 microcontroller */
-#define EM_ST9PLUS 67 /* STMicroelectronics ST9+ 8/16 mc */
-#define EM_ST7 68 /* STmicroelectronics ST7 8 bit mc */
-#define EM_68HC16 69 /* Motorola MC68HC16 microcontroller */
-#define EM_68HC11 70 /* Motorola MC68HC11 microcontroller */
-#define EM_68HC08 71 /* Motorola MC68HC08 microcontroller */
-#define EM_68HC05 72 /* Motorola MC68HC05 microcontroller */
-#define EM_SVX 73 /* Silicon Graphics SVx */
-#define EM_AT19 74 /* STMicroelectronics ST19 8 bit mc */
-#define EM_VAX 75 /* Digital VAX */
-#define EM_CRIS 76 /* Axis Communications 32-bit embedded processor */
-#define EM_JAVELIN 77 /* Infineon Technologies 32-bit embedded processor */
-#define EM_FIREPATH 78 /* Element 14 64-bit DSP Processor */
-#define EM_ZSP 79 /* LSI Logic 16-bit DSP Processor */
-#define EM_MMIX 80 /* Donald Knuth's educational 64-bit processor */
-#define EM_HUANY 81 /* Harvard University machine-independent object files */
-#define EM_PRISM 82 /* SiTera Prism */
-#define EM_AVR 83 /* Atmel AVR 8-bit microcontroller */
-#define EM_FR30 84 /* Fujitsu FR30 */
-#define EM_D10V 85 /* Mitsubishi D10V */
-#define EM_D30V 86 /* Mitsubishi D30V */
-#define EM_V850 87 /* NEC v850 */
-#define EM_M32R 88 /* Mitsubishi M32R */
-#define EM_MN10300 89 /* Matsushita MN10300 */
-#define EM_MN10200 90 /* Matsushita MN10200 */
-#define EM_PJ 91 /* picoJava */
-#define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */
-#define EM_ARC_A5 93 /* ARC Cores Tangent-A5 */
-#define EM_XTENSA 94 /* Tensilica Xtensa Architecture */
-#define EM_NUM 95
-
-/* If it is necessary to assign new unofficial EM_* values, please
- pick large random numbers (0x8523, 0xa7f2, etc.) to minimize the
- chances of collision with official or non-GNU unofficial values. */
-
-#define EM_ALPHA 0x9026
-
-/* Legal values for e_version (version). */
-
-#define EV_NONE 0 /* Invalid ELF version */
-#define EV_CURRENT 1 /* Current version */
-#define EV_NUM 2
-
-/* Section header. */
-
-typedef struct
-{
- Elf32_Word sh_name; /* Section name (string tbl index) */
- Elf32_Word sh_type; /* Section type */
- Elf32_Word sh_flags; /* Section flags */
- Elf32_Addr sh_addr; /* Section virtual addr at execution */
- Elf32_Off sh_offset; /* Section file offset */
- Elf32_Word sh_size; /* Section size in bytes */
- Elf32_Word sh_link; /* Link to another section */
- Elf32_Word sh_info; /* Additional section information */
- Elf32_Word sh_addralign; /* Section alignment */
- Elf32_Word sh_entsize; /* Entry size if section holds table */
-} Elf32_Shdr;
-
-typedef struct
-{
- Elf64_Word sh_name; /* Section name (string tbl index) */
- Elf64_Word sh_type; /* Section type */
- Elf64_Xword sh_flags; /* Section flags */
- Elf64_Addr sh_addr; /* Section virtual addr at execution */
- Elf64_Off sh_offset; /* Section file offset */
- Elf64_Xword sh_size; /* Section size in bytes */
- Elf64_Word sh_link; /* Link to another section */
- Elf64_Word sh_info; /* Additional section information */
- Elf64_Xword sh_addralign; /* Section alignment */
- Elf64_Xword sh_entsize; /* Entry size if section holds table */
-} Elf64_Shdr;
-
-/* Special section indices. */
-
-#define SHN_UNDEF 0 /* Undefined section */
-#define SHN_LORESERVE 0xff00 /* Start of reserved indices */
-#define SHN_LOPROC 0xff00 /* Start of processor-specific */
-#define SHN_HIPROC 0xff1f /* End of processor-specific */
-#define SHN_LOOS 0xff20 /* Start of OS-specific */
-#define SHN_HIOS 0xff3f /* End of OS-specific */
-#define SHN_ABS 0xfff1 /* Associated symbol is absolute */
-#define SHN_COMMON 0xfff2 /* Associated symbol is common */
-#define SHN_XINDEX 0xffff /* Index is in extra table. */
-#define SHN_HIRESERVE 0xffff /* End of reserved indices */
-
-/* Legal values for sh_type (section type). */
-
-#define SHT_NULL 0 /* Section header table entry unused */
-#define SHT_PROGBITS 1 /* Program data */
-#define SHT_SYMTAB 2 /* Symbol table */
-#define SHT_STRTAB 3 /* String table */
-#define SHT_RELA 4 /* Relocation entries with addends */
-#define SHT_HASH 5 /* Symbol hash table */
-#define SHT_DYNAMIC 6 /* Dynamic linking information */
-#define SHT_NOTE 7 /* Notes */
-#define SHT_NOBITS 8 /* Program space with no data (bss) */
-#define SHT_REL 9 /* Relocation entries, no addends */
-#define SHT_SHLIB 10 /* Reserved */
-#define SHT_DYNSYM 11 /* Dynamic linker symbol table */
-#define SHT_INIT_ARRAY 14 /* Array of constructors */
-#define SHT_FINI_ARRAY 15 /* Array of destructors */
-#define SHT_PREINIT_ARRAY 16 /* Array of pre-constructors */
-#define SHT_GROUP 17 /* Section group */
-#define SHT_SYMTAB_SHNDX 18 /* Extended section indeces */
-#define SHT_NUM 19 /* Number of defined types. */
-#define SHT_LOOS 0x60000000 /* Start OS-specific */
-#define SHT_CHECKSUM 0x6ffffff8 /* Checksum for DSO content. */
-#define SHT_LOSUNW 0x6ffffffa /* Sun-specific low bound. */
-#define SHT_SUNW_move 0x6ffffffa
-#define SHT_SUNW_COMDAT 0x6ffffffb
-#define SHT_SUNW_syminfo 0x6ffffffc
-#define SHT_GNU_verdef 0x6ffffffd /* Version definition section. */
-#define SHT_GNU_verneed 0x6ffffffe /* Version needs section. */
-#define SHT_GNU_versym 0x6fffffff /* Version symbol table. */
-#define SHT_HISUNW 0x6fffffff /* Sun-specific high bound. */
-#define SHT_HIOS 0x6fffffff /* End OS-specific type */
-#define SHT_LOPROC 0x70000000 /* Start of processor-specific */
-#define SHT_HIPROC 0x7fffffff /* End of processor-specific */
-#define SHT_LOUSER 0x80000000 /* Start of application-specific */
-#define SHT_HIUSER 0x8fffffff /* End of application-specific */
-
-/* Legal values for sh_flags (section flags). */
-
-#define SHF_WRITE (1 << 0) /* Writable */
-#define SHF_ALLOC (1 << 1) /* Occupies memory during execution */
-#define SHF_EXECINSTR (1 << 2) /* Executable */
-#define SHF_MERGE (1 << 4) /* Might be merged */
-#define SHF_STRINGS (1 << 5) /* Contains nul-terminated strings */
-#define SHF_INFO_LINK (1 << 6) /* `sh_info' contains SHT index */
-#define SHF_LINK_ORDER (1 << 7) /* Preserve order after combining */
-#define SHF_OS_NONCONFORMING (1 << 8) /* Non-standard OS specific handling
- required */
-#define SHF_MASKOS 0x0ff00000 /* OS-specific. */
-#define SHF_MASKPROC 0xf0000000 /* Processor-specific */
-
-/* Section group handling. */
-#define GRP_COMDAT 0x1 /* Mark group as COMDAT. */
-
-/* Symbol table entry. */
-
-typedef struct
-{
- Elf32_Word st_name; /* Symbol name (string tbl index) */
- Elf32_Addr st_value; /* Symbol value */
- Elf32_Word st_size; /* Symbol size */
- unsigned char st_info; /* Symbol type and binding */
- unsigned char st_other; /* Symbol visibility */
- Elf32_Section st_shndx; /* Section index */
-} Elf32_Sym;
-
-typedef struct
-{
- Elf64_Word st_name; /* Symbol name (string tbl index) */
- unsigned char st_info; /* Symbol type and binding */
- unsigned char st_other; /* Symbol visibility */
- Elf64_Section st_shndx; /* Section index */
- Elf64_Addr st_value; /* Symbol value */
- Elf64_Xword st_size; /* Symbol size */
-} Elf64_Sym;
-
-/* The syminfo section if available contains additional information about
- every dynamic symbol. */
-
-typedef struct
-{
- Elf32_Half si_boundto; /* Direct bindings, symbol bound to */
- Elf32_Half si_flags; /* Per symbol flags */
-} Elf32_Syminfo;
-
-typedef struct
-{
- Elf64_Half si_boundto; /* Direct bindings, symbol bound to */
- Elf64_Half si_flags; /* Per symbol flags */
-} Elf64_Syminfo;
-
-/* Possible values for si_boundto. */
-#define SYMINFO_BT_SELF 0xffff /* Symbol bound to self */
-#define SYMINFO_BT_PARENT 0xfffe /* Symbol bound to parent */
-#define SYMINFO_BT_LOWRESERVE 0xff00 /* Beginning of reserved entries */
-
-/* Possible bitmasks for si_flags. */
-#define SYMINFO_FLG_DIRECT 0x0001 /* Direct bound symbol */
-#define SYMINFO_FLG_PASSTHRU 0x0002 /* Pass-thru symbol for translator */
-#define SYMINFO_FLG_COPY 0x0004 /* Symbol is a copy-reloc */
-#define SYMINFO_FLG_LAZYLOAD 0x0008 /* Symbol bound to object to be lazy
- loaded */
-/* Syminfo version values. */
-#define SYMINFO_NONE 0
-#define SYMINFO_CURRENT 1
-#define SYMINFO_NUM 2
-
-
-/* Special section index. */
-
-#define SHN_UNDEF 0 /* No section, undefined symbol. */
-
-/* How to extract and insert information held in the st_info field. */
-
-#define ELF32_ST_BIND(val) (((unsigned char) (val)) >> 4)
-#define ELF32_ST_TYPE(val) ((val) & 0xf)
-#define ELF32_ST_INFO(bind, type) (((bind) << 4) + ((type) & 0xf))
-
-/* Both Elf32_Sym and Elf64_Sym use the same one-byte st_info field. */
-#define ELF64_ST_BIND(val) ELF32_ST_BIND (val)
-#define ELF64_ST_TYPE(val) ELF32_ST_TYPE (val)
-#define ELF64_ST_INFO(bind, type) ELF32_ST_INFO ((bind), (type))
-
-/* Legal values for ST_BIND subfield of st_info (symbol binding). */
-
-#define STB_LOCAL 0 /* Local symbol */
-#define STB_GLOBAL 1 /* Global symbol */
-#define STB_WEAK 2 /* Weak symbol */
-#define STB_NUM 3 /* Number of defined types. */
-#define STB_LOOS 10 /* Start of OS-specific */
-#define STB_HIOS 12 /* End of OS-specific */
-#define STB_LOPROC 13 /* Start of processor-specific */
-#define STB_HIPROC 15 /* End of processor-specific */
-
-/* Legal values for ST_TYPE subfield of st_info (symbol type). */
-
-#define STT_NOTYPE 0 /* Symbol type is unspecified */
-#define STT_OBJECT 1 /* Symbol is a data object */
-#define STT_FUNC 2 /* Symbol is a code object */
-#define STT_SECTION 3 /* Symbol associated with a section */
-#define STT_FILE 4 /* Symbol's name is file name */
-#define STT_COMMON 5 /* Symbol is a common data object */
-#define STT_NUM 6 /* Number of defined types. */
-#define STT_LOOS 10 /* Start of OS-specific */
-#define STT_HIOS 12 /* End of OS-specific */
-#define STT_LOPROC 13 /* Start of processor-specific */
-#define STT_HIPROC 15 /* End of processor-specific */
-
-
-/* Symbol table indices are found in the hash buckets and chain table
- of a symbol hash table section. This special index value indicates
- the end of a chain, meaning no further symbols are found in that bucket. */
-
-#define STN_UNDEF 0 /* End of a chain. */
-
-
-/* How to extract and insert information held in the st_other field. */
-
-#define ELF32_ST_VISIBILITY(o) ((o) & 0x03)
-
-/* For ELF64 the definitions are the same. */
-#define ELF64_ST_VISIBILITY(o) ELF32_ST_VISIBILITY (o)
-
-/* Symbol visibility specification encoded in the st_other field. */
-#define STV_DEFAULT 0 /* Default symbol visibility rules */
-#define STV_INTERNAL 1 /* Processor specific hidden class */
-#define STV_HIDDEN 2 /* Sym unavailable in other modules */
-#define STV_PROTECTED 3 /* Not preemptible, not exported */
-
-
-/* Relocation table entry without addend (in section of type SHT_REL). */
-
-typedef struct
-{
- Elf32_Addr r_offset; /* Address */
- Elf32_Word r_info; /* Relocation type and symbol index */
-} Elf32_Rel;
-
-/* I have seen two different definitions of the Elf64_Rel and
- Elf64_Rela structures, so we'll leave them out until Novell (or
- whoever) gets their act together. */
-/* The following, at least, is used on Sparc v9, MIPS, and Alpha. */
-
-typedef struct
-{
- Elf64_Addr r_offset; /* Address */
- Elf64_Xword r_info; /* Relocation type and symbol index */
-} Elf64_Rel;
-
-/* Relocation table entry with addend (in section of type SHT_RELA). */
-
-typedef struct
-{
- Elf32_Addr r_offset; /* Address */
- Elf32_Word r_info; /* Relocation type and symbol index */
- Elf32_Sword r_addend; /* Addend */
-} Elf32_Rela;
-
-typedef struct
-{
- Elf64_Addr r_offset; /* Address */
- Elf64_Xword r_info; /* Relocation type and symbol index */
- Elf64_Sxword r_addend; /* Addend */
-} Elf64_Rela;
-
-/* How to extract and insert information held in the r_info field. */
-
-#define ELF32_R_SYM(val) ((val) >> 8)
-#define ELF32_R_TYPE(val) ((val) & 0xff)
-#define ELF32_R_INFO(sym, type) (((sym) << 8) + ((type) & 0xff))
-
-#define ELF64_R_SYM(i) ((i) >> 32)
-#define ELF64_R_TYPE(i) ((i) & 0xffffffff)
-#define ELF64_R_INFO(sym,type) ((((Elf64_Xword) (sym)) << 32) + (type))
-
-/* Program segment header. */
-
-typedef struct
-{
- Elf32_Word p_type; /* Segment type */
- Elf32_Off p_offset; /* Segment file offset */
- Elf32_Addr p_vaddr; /* Segment virtual address */
- Elf32_Addr p_paddr; /* Segment physical address */
- Elf32_Word p_filesz; /* Segment size in file */
- Elf32_Word p_memsz; /* Segment size in memory */
- Elf32_Word p_flags; /* Segment flags */
- Elf32_Word p_align; /* Segment alignment */
-} Elf32_Phdr;
-
-typedef struct
-{
- Elf64_Word p_type; /* Segment type */
- Elf64_Word p_flags; /* Segment flags */
- Elf64_Off p_offset; /* Segment file offset */
- Elf64_Addr p_vaddr; /* Segment virtual address */
- Elf64_Addr p_paddr; /* Segment physical address */
- Elf64_Xword p_filesz; /* Segment size in file */
- Elf64_Xword p_memsz; /* Segment size in memory */
- Elf64_Xword p_align; /* Segment alignment */
-} Elf64_Phdr;
-
-/* Legal values for p_type (segment type). */
-
-#define PT_NULL 0 /* Program header table entry unused */
-#define PT_LOAD 1 /* Loadable program segment */
-#define PT_DYNAMIC 2 /* Dynamic linking information */
-#define PT_INTERP 3 /* Program interpreter */
-#define PT_NOTE 4 /* Auxiliary information */
-#define PT_SHLIB 5 /* Reserved */
-#define PT_PHDR 6 /* Entry for header table itself */
-#define PT_NUM 7 /* Number of defined types */
-#define PT_LOOS 0x60000000 /* Start of OS-specific */
-#define PT_HIOS 0x6fffffff /* End of OS-specific */
-#define PT_LOPROC 0x70000000 /* Start of processor-specific */
-#define PT_HIPROC 0x7fffffff /* End of processor-specific */
-
-/* Legal values for p_flags (segment flags). */
-
-#define PF_X (1 << 0) /* Segment is executable */
-#define PF_W (1 << 1) /* Segment is writable */
-#define PF_R (1 << 2) /* Segment is readable */
-#define PF_MASKOS 0x0ff00000 /* OS-specific */
-#define PF_MASKPROC 0xf0000000 /* Processor-specific */
-
-/* Legal values for note segment descriptor types for core files. */
-
-#define NT_PRSTATUS 1 /* Contains copy of prstatus struct */
-#define NT_FPREGSET 2 /* Contains copy of fpregset struct */
-#define NT_PRPSINFO 3 /* Contains copy of prpsinfo struct */
-#define NT_PRXREG 4 /* Contains copy of prxregset struct */
-#define NT_PLATFORM 5 /* String from sysinfo(SI_PLATFORM) */
-#define NT_AUXV 6 /* Contains copy of auxv array */
-#define NT_GWINDOWS 7 /* Contains copy of gwindows struct */
-#define NT_PSTATUS 10 /* Contains copy of pstatus struct */
-#define NT_PSINFO 13 /* Contains copy of psinfo struct */
-#define NT_PRCRED 14 /* Contains copy of prcred struct */
-#define NT_UTSNAME 15 /* Contains copy of utsname struct */
-#define NT_LWPSTATUS 16 /* Contains copy of lwpstatus struct */
-#define NT_LWPSINFO 17 /* Contains copy of lwpinfo struct */
-#define NT_PRFPXREG 20 /* Contains copy of fprxregset struct*/
-
-/* Legal values for the note segment descriptor types for object files. */
-
-#define NT_VERSION 1 /* Contains a version string. */
-
-
-/* Dynamic section entry. */
-
-typedef struct
-{
- Elf32_Sword d_tag; /* Dynamic entry type */
- union
- {
- Elf32_Word d_val; /* Integer value */
- Elf32_Addr d_ptr; /* Address value */
- } d_un;
-} Elf32_Dyn;
-
-typedef struct
-{
- Elf64_Sxword d_tag; /* Dynamic entry type */
- union
- {
- Elf64_Xword d_val; /* Integer value */
- Elf64_Addr d_ptr; /* Address value */
- } d_un;
-} Elf64_Dyn;
-
-/* Legal values for d_tag (dynamic entry type). */
-
-#define DT_NULL 0 /* Marks end of dynamic section */
-#define DT_NEEDED 1 /* Name of needed library */
-#define DT_PLTRELSZ 2 /* Size in bytes of PLT relocs */
-#define DT_PLTGOT 3 /* Processor defined value */
-#define DT_HASH 4 /* Address of symbol hash table */
-#define DT_STRTAB 5 /* Address of string table */
-#define DT_SYMTAB 6 /* Address of symbol table */
-#define DT_RELA 7 /* Address of Rela relocs */
-#define DT_RELASZ 8 /* Total size of Rela relocs */
-#define DT_RELAENT 9 /* Size of one Rela reloc */
-#define DT_STRSZ 10 /* Size of string table */
-#define DT_SYMENT 11 /* Size of one symbol table entry */
-#define DT_INIT 12 /* Address of init function */
-#define DT_FINI 13 /* Address of termination function */
-#define DT_SONAME 14 /* Name of shared object */
-#define DT_RPATH 15 /* Library search path (deprecated) */
-#define DT_SYMBOLIC 16 /* Start symbol search here */
-#define DT_REL 17 /* Address of Rel relocs */
-#define DT_RELSZ 18 /* Total size of Rel relocs */
-#define DT_RELENT 19 /* Size of one Rel reloc */
-#define DT_PLTREL 20 /* Type of reloc in PLT */
-#define DT_DEBUG 21 /* For debugging; unspecified */
-#define DT_TEXTREL 22 /* Reloc might modify .text */
-#define DT_JMPREL 23 /* Address of PLT relocs */
-#define DT_BIND_NOW 24 /* Process relocations of object */
-#define DT_INIT_ARRAY 25 /* Array with addresses of init fct */
-#define DT_FINI_ARRAY 26 /* Array with addresses of fini fct */
-#define DT_INIT_ARRAYSZ 27 /* Size in bytes of DT_INIT_ARRAY */
-#define DT_FINI_ARRAYSZ 28 /* Size in bytes of DT_FINI_ARRAY */
-#define DT_RUNPATH 29 /* Library search path */
-#define DT_FLAGS 30 /* Flags for the object being loaded */
-#define DT_ENCODING 32 /* Start of encoded range */
-#define DT_PREINIT_ARRAY 32 /* Array with addresses of preinit fct*/
-#define DT_PREINIT_ARRAYSZ 33 /* size in bytes of DT_PREINIT_ARRAY */
-#define DT_NUM 34 /* Number used */
-#define DT_LOOS 0x60000000 /* Start of OS-specific */
-#define DT_HIOS 0x6fffffff /* End of OS-specific */
-#define DT_LOPROC 0x70000000 /* Start of processor-specific */
-#define DT_HIPROC 0x7fffffff /* End of processor-specific */
-#define DT_PROCNUM DT_MIPS_NUM /* Most used by any processor */
-
-/* DT_* entries which fall between DT_VALRNGHI & DT_VALRNGLO use the
- Dyn.d_un.d_val field of the Elf*_Dyn structure. This follows Sun's
- approach. */
-#define DT_VALRNGLO 0x6ffffd00
-#define DT_CHECKSUM 0x6ffffdf8
-#define DT_PLTPADSZ 0x6ffffdf9
-#define DT_MOVEENT 0x6ffffdfa
-#define DT_MOVESZ 0x6ffffdfb
-#define DT_FEATURE_1 0x6ffffdfc /* Feature selection (DTF_*). */
-#define DT_POSFLAG_1 0x6ffffdfd /* Flags for DT_* entries, effecting
- the following DT_* entry. */
-#define DT_SYMINSZ 0x6ffffdfe /* Size of syminfo table (in bytes) */
-#define DT_SYMINENT 0x6ffffdff /* Entry size of syminfo */
-#define DT_VALRNGHI 0x6ffffdff
-
-/* DT_* entries which fall between DT_ADDRRNGHI & DT_ADDRRNGLO use the
- Dyn.d_un.d_ptr field of the Elf*_Dyn structure.
-
- If any adjustment is made to the ELF object after it has been
- built these entries will need to be adjusted. */
-#define DT_ADDRRNGLO 0x6ffffe00
-#define DT_CONFIG 0x6ffffefa /* Configuration information. */
-#define DT_DEPAUDIT 0x6ffffefb /* Dependency auditing. */
-#define DT_AUDIT 0x6ffffefc /* Object auditing. */
-#define DT_PLTPAD 0x6ffffefd /* PLT padding. */
-#define DT_MOVETAB 0x6ffffefe /* Move table. */
-#define DT_SYMINFO 0x6ffffeff /* Syminfo table. */
-#define DT_ADDRRNGHI 0x6ffffeff
-
-/* The versioning entry types. The next are defined as part of the
- GNU extension. */
-#define DT_VERSYM 0x6ffffff0
-
-#define DT_RELACOUNT 0x6ffffff9
-#define DT_RELCOUNT 0x6ffffffa
-
-/* These were chosen by Sun. */
-#define DT_FLAGS_1 0x6ffffffb /* State flags, see DF_1_* below. */
-#define DT_VERDEF 0x6ffffffc /* Address of version definition
- table */
-#define DT_VERDEFNUM 0x6ffffffd /* Number of version definitions */
-#define DT_VERNEED 0x6ffffffe /* Address of table with needed
- versions */
-#define DT_VERNEEDNUM 0x6fffffff /* Number of needed versions */
-#define DT_VERSIONTAGIDX(tag) (DT_VERNEEDNUM - (tag)) /* Reverse order! */
-#define DT_VERSIONTAGNUM 16
-
-/* Sun added these machine-independent extensions in the "processor-specific"
- range. Be compatible. */
-#define DT_AUXILIARY 0x7ffffffd /* Shared object to load before self */
-#define DT_FILTER 0x7fffffff /* Shared object to get values from */
-#define DT_EXTRATAGIDX(tag) ((Elf32_Word)-((Elf32_Sword) (tag) <<1>>1)-1)
-#define DT_EXTRANUM 3
-
-/* Values of `d_un.d_val' in the DT_FLAGS entry. */
-#define DF_ORIGIN 0x00000001 /* Object may use DF_ORIGIN */
-#define DF_SYMBOLIC 0x00000002 /* Symbol resolutions starts here */
-#define DF_TEXTREL 0x00000004 /* Object contains text relocations */
-#define DF_BIND_NOW 0x00000008 /* No lazy binding for this object */
-
-/* State flags selectable in the `d_un.d_val' element of the DT_FLAGS_1
- entry in the dynamic section. */
-#define DF_1_NOW 0x00000001 /* Set RTLD_NOW for this object. */
-#define DF_1_GLOBAL 0x00000002 /* Set RTLD_GLOBAL for this object. */
-#define DF_1_GROUP 0x00000004 /* Set RTLD_GROUP for this object. */
-#define DF_1_NODELETE 0x00000008 /* Set RTLD_NODELETE for this object.*/
-#define DF_1_LOADFLTR 0x00000010 /* Trigger filtee loading at runtime.*/
-#define DF_1_INITFIRST 0x00000020 /* Set RTLD_INITFIRST for this object*/
-#define DF_1_NOOPEN 0x00000040 /* Set RTLD_NOOPEN for this object. */
-#define DF_1_ORIGIN 0x00000080 /* $ORIGIN must be handled. */
-#define DF_1_DIRECT 0x00000100 /* Direct binding enabled. */
-#define DF_1_TRANS 0x00000200
-#define DF_1_INTERPOSE 0x00000400 /* Object is used to interpose. */
-#define DF_1_NODEFLIB 0x00000800 /* Ignore default lib search path. */
-#define DF_1_NODUMP 0x00001000 /* Object can't be dldump'ed. */
-#define DF_1_CONFALT 0x00002000 /* Configuration alternative created.*/
-#define DF_1_ENDFILTEE 0x00004000 /* Filtee terminates filters search. */
-#define DF_1_DISPRELDNE 0x00008000 /* Disp reloc applied at build time. */
-#define DF_1_DISPRELPND 0x00010000 /* Disp reloc applied at run-time. */
-
-/* Flags for the feature selection in DT_FEATURE_1. */
-#define DTF_1_PARINIT 0x00000001
-#define DTF_1_CONFEXP 0x00000002
-
-/* Flags in the DT_POSFLAG_1 entry effecting only the next DT_* entry. */
-#define DF_P1_LAZYLOAD 0x00000001 /* Lazyload following object. */
-#define DF_P1_GROUPPERM 0x00000002 /* Symbols from next object are not
- generally available. */
-
-/* Version definition sections. */
-
-typedef struct
-{
- Elf32_Half vd_version; /* Version revision */
- Elf32_Half vd_flags; /* Version information */
- Elf32_Half vd_ndx; /* Version Index */
- Elf32_Half vd_cnt; /* Number of associated aux entries */
- Elf32_Word vd_hash; /* Version name hash value */
- Elf32_Word vd_aux; /* Offset in bytes to verdaux array */
- Elf32_Word vd_next; /* Offset in bytes to next verdef
- entry */
-} Elf32_Verdef;
-
-typedef struct
-{
- Elf64_Half vd_version; /* Version revision */
- Elf64_Half vd_flags; /* Version information */
- Elf64_Half vd_ndx; /* Version Index */
- Elf64_Half vd_cnt; /* Number of associated aux entries */
- Elf64_Word vd_hash; /* Version name hash value */
- Elf64_Word vd_aux; /* Offset in bytes to verdaux array */
- Elf64_Word vd_next; /* Offset in bytes to next verdef
- entry */
-} Elf64_Verdef;
-
-
-/* Legal values for vd_version (version revision). */
-#define VER_DEF_NONE 0 /* No version */
-#define VER_DEF_CURRENT 1 /* Current version */
-#define VER_DEF_NUM 2 /* Given version number */
-
-/* Legal values for vd_flags (version information flags). */
-#define VER_FLG_BASE 0x1 /* Version definition of file itself */
-#define VER_FLG_WEAK 0x2 /* Weak version identifier */
-
-/* Versym symbol index values. */
-#define VER_NDX_LOCAL 0 /* Symbol is local. */
-#define VER_NDX_GLOBAL 1 /* Symbol is global. */
-#define VER_NDX_LORESERVE 0xff00 /* Beginning of reserved entries. */
-#define VER_NDX_ELIMINATE 0xff01 /* Symbol is to be eliminated. */
-
-/* Auxialiary version information. */
-
-typedef struct
-{
- Elf32_Word vda_name; /* Version or dependency names */
- Elf32_Word vda_next; /* Offset in bytes to next verdaux
- entry */
-} Elf32_Verdaux;
-
-typedef struct
-{
- Elf64_Word vda_name; /* Version or dependency names */
- Elf64_Word vda_next; /* Offset in bytes to next verdaux
- entry */
-} Elf64_Verdaux;
-
-
-/* Version dependency section. */
-
-typedef struct
-{
- Elf32_Half vn_version; /* Version of structure */
- Elf32_Half vn_cnt; /* Number of associated aux entries */
- Elf32_Word vn_file; /* Offset of filename for this
- dependency */
- Elf32_Word vn_aux; /* Offset in bytes to vernaux array */
- Elf32_Word vn_next; /* Offset in bytes to next verneed
- entry */
-} Elf32_Verneed;
-
-typedef struct
-{
- Elf64_Half vn_version; /* Version of structure */
- Elf64_Half vn_cnt; /* Number of associated aux entries */
- Elf64_Word vn_file; /* Offset of filename for this
- dependency */
- Elf64_Word vn_aux; /* Offset in bytes to vernaux array */
- Elf64_Word vn_next; /* Offset in bytes to next verneed
- entry */
-} Elf64_Verneed;
-
-
-/* Legal values for vn_version (version revision). */
-#define VER_NEED_NONE 0 /* No version */
-#define VER_NEED_CURRENT 1 /* Current version */
-#define VER_NEED_NUM 2 /* Given version number */
-
-/* Auxiliary needed version information. */
-
-typedef struct
-{
- Elf32_Word vna_hash; /* Hash value of dependency name */
- Elf32_Half vna_flags; /* Dependency specific information */
- Elf32_Half vna_other; /* Unused */
- Elf32_Word vna_name; /* Dependency name string offset */
- Elf32_Word vna_next; /* Offset in bytes to next vernaux
- entry */
-} Elf32_Vernaux;
-
-typedef struct
-{
- Elf64_Word vna_hash; /* Hash value of dependency name */
- Elf64_Half vna_flags; /* Dependency specific information */
- Elf64_Half vna_other; /* Unused */
- Elf64_Word vna_name; /* Dependency name string offset */
- Elf64_Word vna_next; /* Offset in bytes to next vernaux
- entry */
-} Elf64_Vernaux;
-
-
-/* Legal values for vna_flags. */
-#define VER_FLG_WEAK 0x2 /* Weak version identifier */
-
-
-/* Auxiliary vector. */
-
-/* This vector is normally only used by the program interpreter. The
- usual definition in an ABI supplement uses the name auxv_t. The
- vector is not usually defined in a standard <elf.h> file, but it
- can't hurt. We rename it to avoid conflicts. The sizes of these
- types are an arrangement between the exec server and the program
- interpreter, so we don't fully specify them here. */
-
-typedef struct
-{
- int a_type; /* Entry type */
- union
- {
- long int a_val; /* Integer value */
- void *a_ptr; /* Pointer value */
- void (*a_fcn) (void); /* Function pointer value */
- } a_un;
-} Elf32_auxv_t;
-
-typedef struct
-{
- long int a_type; /* Entry type */
- union
- {
- long int a_val; /* Integer value */
- void *a_ptr; /* Pointer value */
- void (*a_fcn) (void); /* Function pointer value */
- } a_un;
-} Elf64_auxv_t;
-
-/* Legal values for a_type (entry type). */
-
-#define AT_NULL 0 /* End of vector */
-#define AT_IGNORE 1 /* Entry should be ignored */
-#define AT_EXECFD 2 /* File descriptor of program */
-#define AT_PHDR 3 /* Program headers for program */
-#define AT_PHENT 4 /* Size of program header entry */
-#define AT_PHNUM 5 /* Number of program headers */
-#define AT_PAGESZ 6 /* System page size */
-#define AT_BASE 7 /* Base address of interpreter */
-#define AT_FLAGS 8 /* Flags */
-#define AT_ENTRY 9 /* Entry point of program */
-#define AT_NOTELF 10 /* Program is not ELF */
-#define AT_UID 11 /* Real uid */
-#define AT_EUID 12 /* Effective uid */
-#define AT_GID 13 /* Real gid */
-#define AT_EGID 14 /* Effective gid */
-#define AT_CLKTCK 17 /* Frequency of times() */
-
-/* Some more special a_type values describing the hardware. */
-#define AT_PLATFORM 15 /* String identifying platform. */
-#define AT_HWCAP 16 /* Machine dependent hints about
- processor capabilities. */
-
-/* This entry gives some information about the FPU initialization
- performed by the kernel. */
-#define AT_FPUCW 18 /* Used FPU control word. */
-
-/* Cache block sizes. */
-#define AT_DCACHEBSIZE 19 /* Data cache block size. */
-#define AT_ICACHEBSIZE 20 /* Instruction cache block size. */
-#define AT_UCACHEBSIZE 21 /* Unified cache block size. */
-
-/* A special ignored value for PPC, used by the kernel to control the
- interpretation of the AUXV. Must be > 16. */
-#define AT_IGNOREPPC 22 /* Entry should be ignored */
-
-
-/* Note section contents. Each entry in the note section begins with
- a header of a fixed form. */
-
-typedef struct
-{
- Elf32_Word n_namesz; /* Length of the note's name. */
- Elf32_Word n_descsz; /* Length of the note's descriptor. */
- Elf32_Word n_type; /* Type of the note. */
-} Elf32_Nhdr;
-
-typedef struct
-{
- Elf64_Word n_namesz; /* Length of the note's name. */
- Elf64_Word n_descsz; /* Length of the note's descriptor. */
- Elf64_Word n_type; /* Type of the note. */
-} Elf64_Nhdr;
-
-/* Known names of notes. */
-
-/* Solaris entries in the note section have this name. */
-#define ELF_NOTE_SOLARIS "SUNW Solaris"
-
-/* Note entries for GNU systems have this name. */
-#define ELF_NOTE_GNU "GNU"
-
-
-/* Defined types of notes for Solaris. */
-
-/* Value of descriptor (one word) is desired pagesize for the binary. */
-#define ELF_NOTE_PAGESIZE_HINT 1
-
-
-/* Defined note types for GNU systems. */
-
-/* ABI information. The descriptor consists of words:
- word 0: OS descriptor
- word 1: major version of the ABI
- word 2: minor version of the ABI
- word 3: subminor version of the ABI
-*/
-#define ELF_NOTE_ABI 1
-
-/* Known OSes. These value can appear in word 0 of an ELF_NOTE_ABI
- note section entry. */
-#define ELF_NOTE_OS_LINUX 0
-#define ELF_NOTE_OS_GNU 1
-#define ELF_NOTE_OS_SOLARIS2 2
-
-
-/* Move records. */
-typedef struct
-{
- Elf32_Xword m_value; /* Symbol value. */
- Elf32_Word m_info; /* Size and index. */
- Elf32_Word m_poffset; /* Symbol offset. */
- Elf32_Half m_repeat; /* Repeat count. */
- Elf32_Half m_stride; /* Stride info. */
-} Elf32_Move;
-
-typedef struct
-{
- Elf64_Xword m_value; /* Symbol value. */
- Elf64_Xword m_info; /* Size and index. */
- Elf64_Xword m_poffset; /* Symbol offset. */
- Elf64_Half m_repeat; /* Repeat count. */
- Elf64_Half m_stride; /* Stride info. */
-} Elf64_Move;
-
-/* Macro to construct move records. */
-#define ELF32_M_SYM(info) ((info) >> 8)
-#define ELF32_M_SIZE(info) ((unsigned char) (info))
-#define ELF32_M_INFO(sym, size) (((sym) << 8) + (unsigned char) (size))
-
-#define ELF64_M_SYM(info) ELF32_M_SYM (info)
-#define ELF64_M_SIZE(info) ELF32_M_SIZE (info)
-#define ELF64_M_INFO(sym, size) ELF32_M_INFO (sym, size)
-
-
-/* Motorola 68k specific definitions. */
-
-/* Values for Elf32_Ehdr.e_flags. */
-#define EF_CPU32 0x00810000
-
-/* m68k relocs. */
-
-#define R_68K_NONE 0 /* No reloc */
-#define R_68K_32 1 /* Direct 32 bit */
-#define R_68K_16 2 /* Direct 16 bit */
-#define R_68K_8 3 /* Direct 8 bit */
-#define R_68K_PC32 4 /* PC relative 32 bit */
-#define R_68K_PC16 5 /* PC relative 16 bit */
-#define R_68K_PC8 6 /* PC relative 8 bit */
-#define R_68K_GOT32 7 /* 32 bit PC relative GOT entry */
-#define R_68K_GOT16 8 /* 16 bit PC relative GOT entry */
-#define R_68K_GOT8 9 /* 8 bit PC relative GOT entry */
-#define R_68K_GOT32O 10 /* 32 bit GOT offset */
-#define R_68K_GOT16O 11 /* 16 bit GOT offset */
-#define R_68K_GOT8O 12 /* 8 bit GOT offset */
-#define R_68K_PLT32 13 /* 32 bit PC relative PLT address */
-#define R_68K_PLT16 14 /* 16 bit PC relative PLT address */
-#define R_68K_PLT8 15 /* 8 bit PC relative PLT address */
-#define R_68K_PLT32O 16 /* 32 bit PLT offset */
-#define R_68K_PLT16O 17 /* 16 bit PLT offset */
-#define R_68K_PLT8O 18 /* 8 bit PLT offset */
-#define R_68K_COPY 19 /* Copy symbol at runtime */
-#define R_68K_GLOB_DAT 20 /* Create GOT entry */
-#define R_68K_JMP_SLOT 21 /* Create PLT entry */
-#define R_68K_RELATIVE 22 /* Adjust by program base */
-/* Keep this the last entry. */
-#define R_68K_NUM 23
-
-/* Intel 80386 specific definitions. */
-
-/* i386 relocs. */
-
-#define R_386_NONE 0 /* No reloc */
-#define R_386_32 1 /* Direct 32 bit */
-#define R_386_PC32 2 /* PC relative 32 bit */
-#define R_386_GOT32 3 /* 32 bit GOT entry */
-#define R_386_PLT32 4 /* 32 bit PLT address */
-#define R_386_COPY 5 /* Copy symbol at runtime */
-#define R_386_GLOB_DAT 6 /* Create GOT entry */
-#define R_386_JMP_SLOT 7 /* Create PLT entry */
-#define R_386_RELATIVE 8 /* Adjust by program base */
-#define R_386_GOTOFF 9 /* 32 bit offset to GOT */
-#define R_386_GOTPC 10 /* 32 bit PC relative offset to GOT */
-/* Keep this the last entry. */
-#define R_386_NUM 11
-
-/* SUN SPARC specific definitions. */
-
-/* Legal values for ST_TYPE subfield of st_info (symbol type). */
-
-#define STT_REGISTER 13 /* Global register reserved to app. */
-
-/* Values for Elf64_Ehdr.e_flags. */
-
-#define EF_SPARCV9_MM 3
-#define EF_SPARCV9_TSO 0
-#define EF_SPARCV9_PSO 1
-#define EF_SPARCV9_RMO 2
-#define EF_SPARC_LEDATA 0x800000 /* little endian data */
-#define EF_SPARC_EXT_MASK 0xFFFF00
-#define EF_SPARC_32PLUS 0x000100 /* generic V8+ features */
-#define EF_SPARC_SUN_US1 0x000200 /* Sun UltraSPARC1 extensions */
-#define EF_SPARC_HAL_R1 0x000400 /* HAL R1 extensions */
-#define EF_SPARC_SUN_US3 0x000800 /* Sun UltraSPARCIII extensions */
-
-/* SPARC relocs. */
-
-#define R_SPARC_NONE 0 /* No reloc */
-#define R_SPARC_8 1 /* Direct 8 bit */
-#define R_SPARC_16 2 /* Direct 16 bit */
-#define R_SPARC_32 3 /* Direct 32 bit */
-#define R_SPARC_DISP8 4 /* PC relative 8 bit */
-#define R_SPARC_DISP16 5 /* PC relative 16 bit */
-#define R_SPARC_DISP32 6 /* PC relative 32 bit */
-#define R_SPARC_WDISP30 7 /* PC relative 30 bit shifted */
-#define R_SPARC_WDISP22 8 /* PC relative 22 bit shifted */
-#define R_SPARC_HI22 9 /* High 22 bit */
-#define R_SPARC_22 10 /* Direct 22 bit */
-#define R_SPARC_13 11 /* Direct 13 bit */
-#define R_SPARC_LO10 12 /* Truncated 10 bit */
-#define R_SPARC_GOT10 13 /* Truncated 10 bit GOT entry */
-#define R_SPARC_GOT13 14 /* 13 bit GOT entry */
-#define R_SPARC_GOT22 15 /* 22 bit GOT entry shifted */
-#define R_SPARC_PC10 16 /* PC relative 10 bit truncated */
-#define R_SPARC_PC22 17 /* PC relative 22 bit shifted */
-#define R_SPARC_WPLT30 18 /* 30 bit PC relative PLT address */
-#define R_SPARC_COPY 19 /* Copy symbol at runtime */
-#define R_SPARC_GLOB_DAT 20 /* Create GOT entry */
-#define R_SPARC_JMP_SLOT 21 /* Create PLT entry */
-#define R_SPARC_RELATIVE 22 /* Adjust by program base */
-#define R_SPARC_UA32 23 /* Direct 32 bit unaligned */
-
-/* Additional Sparc64 relocs. */
-
-#define R_SPARC_PLT32 24 /* Direct 32 bit ref to PLT entry */
-#define R_SPARC_HIPLT22 25 /* High 22 bit PLT entry */
-#define R_SPARC_LOPLT10 26 /* Truncated 10 bit PLT entry */
-#define R_SPARC_PCPLT32 27 /* PC rel 32 bit ref to PLT entry */
-#define R_SPARC_PCPLT22 28 /* PC rel high 22 bit PLT entry */
-#define R_SPARC_PCPLT10 29 /* PC rel trunc 10 bit PLT entry */
-#define R_SPARC_10 30 /* Direct 10 bit */
-#define R_SPARC_11 31 /* Direct 11 bit */
-#define R_SPARC_64 32 /* Direct 64 bit */
-#define R_SPARC_OLO10 33 /* 10bit with secondary 13bit addend */
-#define R_SPARC_HH22 34 /* Top 22 bits of direct 64 bit */
-#define R_SPARC_HM10 35 /* High middle 10 bits of ... */
-#define R_SPARC_LM22 36 /* Low middle 22 bits of ... */
-#define R_SPARC_PC_HH22 37 /* Top 22 bits of pc rel 64 bit */
-#define R_SPARC_PC_HM10 38 /* High middle 10 bit of ... */
-#define R_SPARC_PC_LM22 39 /* Low miggle 22 bits of ... */
-#define R_SPARC_WDISP16 40 /* PC relative 16 bit shifted */
-#define R_SPARC_WDISP19 41 /* PC relative 19 bit shifted */
-#define R_SPARC_7 43 /* Direct 7 bit */
-#define R_SPARC_5 44 /* Direct 5 bit */
-#define R_SPARC_6 45 /* Direct 6 bit */
-#define R_SPARC_DISP64 46 /* PC relative 64 bit */
-#define R_SPARC_PLT64 47 /* Direct 64 bit ref to PLT entry */
-#define R_SPARC_HIX22 48 /* High 22 bit complemented */
-#define R_SPARC_LOX10 49 /* Truncated 11 bit complemented */
-#define R_SPARC_H44 50 /* Direct high 12 of 44 bit */
-#define R_SPARC_M44 51 /* Direct mid 22 of 44 bit */
-#define R_SPARC_L44 52 /* Direct low 10 of 44 bit */
-#define R_SPARC_REGISTER 53 /* Global register usage */
-#define R_SPARC_UA64 54 /* Direct 64 bit unaligned */
-#define R_SPARC_UA16 55 /* Direct 16 bit unaligned */
-/* Keep this the last entry. */
-#define R_SPARC_NUM 56
-
-/* For Sparc64, legal values for d_tag of Elf64_Dyn. */
-
-#define DT_SPARC_REGISTER 0x70000001
-#define DT_SPARC_NUM 2
-
-/* Bits present in AT_HWCAP, primarily for Sparc32. */
-
-#define HWCAP_SPARC_FLUSH 1 /* The cpu supports flush insn. */
-#define HWCAP_SPARC_STBAR 2
-#define HWCAP_SPARC_SWAP 4
-#define HWCAP_SPARC_MULDIV 8
-#define HWCAP_SPARC_V9 16 /* The cpu is v9, so v8plus is ok. */
-#define HWCAP_SPARC_ULTRA3 32
-
-/* MIPS R3000 specific definitions. */
-
-/* Legal values for e_flags field of Elf32_Ehdr. */
-
-#define EF_MIPS_NOREORDER 1 /* A .noreorder directive was used */
-#define EF_MIPS_PIC 2 /* Contains PIC code */
-#define EF_MIPS_CPIC 4 /* Uses PIC calling sequence */
-#define EF_MIPS_XGOT 8
-#define EF_MIPS_64BIT_WHIRL 16
-#define EF_MIPS_ABI2 32
-#define EF_MIPS_ABI_ON32 64
-#define EF_MIPS_ARCH 0xf0000000 /* MIPS architecture level */
-
-/* Legal values for MIPS architecture level. */
-
-#define EF_MIPS_ARCH_1 0x00000000 /* -mips1 code. */
-#define EF_MIPS_ARCH_2 0x10000000 /* -mips2 code. */
-#define EF_MIPS_ARCH_3 0x20000000 /* -mips3 code. */
-#define EF_MIPS_ARCH_4 0x30000000 /* -mips4 code. */
-#define EF_MIPS_ARCH_5 0x40000000 /* -mips5 code. */
-#define EF_MIPS_ARCH_32 0x60000000 /* MIPS32 code. */
-#define EF_MIPS_ARCH_64 0x70000000 /* MIPS64 code. */
-
-/* The following are non-official names and should not be used. */
-
-#define E_MIPS_ARCH_1 0x00000000 /* -mips1 code. */
-#define E_MIPS_ARCH_2 0x10000000 /* -mips2 code. */
-#define E_MIPS_ARCH_3 0x20000000 /* -mips3 code. */
-#define E_MIPS_ARCH_4 0x30000000 /* -mips4 code. */
-#define E_MIPS_ARCH_5 0x40000000 /* -mips5 code. */
-#define E_MIPS_ARCH_32 0x60000000 /* MIPS32 code. */
-#define E_MIPS_ARCH_64 0x70000000 /* MIPS64 code. */
-
-/* Special section indices. */
-
-#define SHN_MIPS_ACOMMON 0xff00 /* Allocated common symbols */
-#define SHN_MIPS_TEXT 0xff01 /* Allocated test symbols. */
-#define SHN_MIPS_DATA 0xff02 /* Allocated data symbols. */
-#define SHN_MIPS_SCOMMON 0xff03 /* Small common symbols */
-#define SHN_MIPS_SUNDEFINED 0xff04 /* Small undefined symbols */
-
-/* Legal values for sh_type field of Elf32_Shdr. */
-
-#define SHT_MIPS_LIBLIST 0x70000000 /* Shared objects used in link */
-#define SHT_MIPS_MSYM 0x70000001
-#define SHT_MIPS_CONFLICT 0x70000002 /* Conflicting symbols */
-#define SHT_MIPS_GPTAB 0x70000003 /* Global data area sizes */
-#define SHT_MIPS_UCODE 0x70000004 /* Reserved for SGI/MIPS compilers */
-#define SHT_MIPS_DEBUG 0x70000005 /* MIPS ECOFF debugging information*/
-#define SHT_MIPS_REGINFO 0x70000006 /* Register usage information */
-#define SHT_MIPS_PACKAGE 0x70000007
-#define SHT_MIPS_PACKSYM 0x70000008
-#define SHT_MIPS_RELD 0x70000009
-#define SHT_MIPS_IFACE 0x7000000b
-#define SHT_MIPS_CONTENT 0x7000000c
-#define SHT_MIPS_OPTIONS 0x7000000d /* Miscellaneous options. */
-#define SHT_MIPS_SHDR 0x70000010
-#define SHT_MIPS_FDESC 0x70000011
-#define SHT_MIPS_EXTSYM 0x70000012
-#define SHT_MIPS_DENSE 0x70000013
-#define SHT_MIPS_PDESC 0x70000014
-#define SHT_MIPS_LOCSYM 0x70000015
-#define SHT_MIPS_AUXSYM 0x70000016
-#define SHT_MIPS_OPTSYM 0x70000017
-#define SHT_MIPS_LOCSTR 0x70000018
-#define SHT_MIPS_LINE 0x70000019
-#define SHT_MIPS_RFDESC 0x7000001a
-#define SHT_MIPS_DELTASYM 0x7000001b
-#define SHT_MIPS_DELTAINST 0x7000001c
-#define SHT_MIPS_DELTACLASS 0x7000001d
-#define SHT_MIPS_DWARF 0x7000001e /* DWARF debugging information. */
-#define SHT_MIPS_DELTADECL 0x7000001f
-#define SHT_MIPS_SYMBOL_LIB 0x70000020
-#define SHT_MIPS_EVENTS 0x70000021 /* Event section. */
-#define SHT_MIPS_TRANSLATE 0x70000022
-#define SHT_MIPS_PIXIE 0x70000023
-#define SHT_MIPS_XLATE 0x70000024
-#define SHT_MIPS_XLATE_DEBUG 0x70000025
-#define SHT_MIPS_WHIRL 0x70000026
-#define SHT_MIPS_EH_REGION 0x70000027
-#define SHT_MIPS_XLATE_OLD 0x70000028
-#define SHT_MIPS_PDR_EXCEPTION 0x70000029
-
-/* Legal values for sh_flags field of Elf32_Shdr. */
-
-#define SHF_MIPS_GPREL 0x10000000 /* Must be part of global data area */
-#define SHF_MIPS_MERGE 0x20000000
-#define SHF_MIPS_ADDR 0x40000000
-#define SHF_MIPS_STRINGS 0x80000000
-#define SHF_MIPS_NOSTRIP 0x08000000
-#define SHF_MIPS_LOCAL 0x04000000
-#define SHF_MIPS_NAMES 0x02000000
-#define SHF_MIPS_NODUPE 0x01000000
-
-
-/* Symbol tables. */
-
-/* MIPS specific values for `st_other'. */
-#define STO_MIPS_DEFAULT 0x0
-#define STO_MIPS_INTERNAL 0x1
-#define STO_MIPS_HIDDEN 0x2
-#define STO_MIPS_PROTECTED 0x3
-#define STO_MIPS_SC_ALIGN_UNUSED 0xff
-
-/* MIPS specific values for `st_info'. */
-#define STB_MIPS_SPLIT_COMMON 13
-
-/* Entries found in sections of type SHT_MIPS_GPTAB. */
-
-typedef union
-{
- struct
- {
- Elf32_Word gt_current_g_value; /* -G value used for compilation */
- Elf32_Word gt_unused; /* Not used */
- } gt_header; /* First entry in section */
- struct
- {
- Elf32_Word gt_g_value; /* If this value were used for -G */
- Elf32_Word gt_bytes; /* This many bytes would be used */
- } gt_entry; /* Subsequent entries in section */
-} Elf32_gptab;
-
-/* Entry found in sections of type SHT_MIPS_REGINFO. */
-
-typedef struct
-{
- Elf32_Word ri_gprmask; /* General registers used */
- Elf32_Word ri_cprmask[4]; /* Coprocessor registers used */
- Elf32_Sword ri_gp_value; /* $gp register value */
-} Elf32_RegInfo;
-
-/* Entries found in sections of type SHT_MIPS_OPTIONS. */
-
-typedef struct
-{
- unsigned char kind; /* Determines interpretation of the
- variable part of descriptor. */
- unsigned char size; /* Size of descriptor, including header. */
- Elf32_Section section; /* Section header index of section affected,
- 0 for global options. */
- Elf32_Word info; /* Kind-specific information. */
-} Elf_Options;
-
-/* Values for `kind' field in Elf_Options. */
-
-#define ODK_NULL 0 /* Undefined. */
-#define ODK_REGINFO 1 /* Register usage information. */
-#define ODK_EXCEPTIONS 2 /* Exception processing options. */
-#define ODK_PAD 3 /* Section padding options. */
-#define ODK_HWPATCH 4 /* Hardware workarounds performed */
-#define ODK_FILL 5 /* record the fill value used by the linker. */
-#define ODK_TAGS 6 /* reserve space for desktop tools to write. */
-#define ODK_HWAND 7 /* HW workarounds. 'AND' bits when merging. */
-#define ODK_HWOR 8 /* HW workarounds. 'OR' bits when merging. */
-
-/* Values for `info' in Elf_Options for ODK_EXCEPTIONS entries. */
-
-#define OEX_FPU_MIN 0x1f /* FPE's which MUST be enabled. */
-#define OEX_FPU_MAX 0x1f00 /* FPE's which MAY be enabled. */
-#define OEX_PAGE0 0x10000 /* page zero must be mapped. */
-#define OEX_SMM 0x20000 /* Force sequential memory mode? */
-#define OEX_FPDBUG 0x40000 /* Force floating point debug mode? */
-#define OEX_PRECISEFP OEX_FPDBUG
-#define OEX_DISMISS 0x80000 /* Dismiss invalid address faults? */
-
-#define OEX_FPU_INVAL 0x10
-#define OEX_FPU_DIV0 0x08
-#define OEX_FPU_OFLO 0x04
-#define OEX_FPU_UFLO 0x02
-#define OEX_FPU_INEX 0x01
-
-/* Masks for `info' in Elf_Options for an ODK_HWPATCH entry. */
-
-#define OHW_R4KEOP 0x1 /* R4000 end-of-page patch. */
-#define OHW_R8KPFETCH 0x2 /* may need R8000 prefetch patch. */
-#define OHW_R5KEOP 0x4 /* R5000 end-of-page patch. */
-#define OHW_R5KCVTL 0x8 /* R5000 cvt.[ds].l bug. clean=1. */
-
-#define OPAD_PREFIX 0x1
-#define OPAD_POSTFIX 0x2
-#define OPAD_SYMBOL 0x4
-
-/* Entry found in `.options' section. */
-
-typedef struct
-{
- Elf32_Word hwp_flags1; /* Extra flags. */
- Elf32_Word hwp_flags2; /* Extra flags. */
-} Elf_Options_Hw;
-
-/* Masks for `info' in ElfOptions for ODK_HWAND and ODK_HWOR entries. */
-
-#define OHWA0_R4KEOP_CHECKED 0x00000001
-#define OHWA1_R4KEOP_CLEAN 0x00000002
-
-/* MIPS relocs. */
-
-#define R_MIPS_NONE 0 /* No reloc */
-#define R_MIPS_16 1 /* Direct 16 bit */
-#define R_MIPS_32 2 /* Direct 32 bit */
-#define R_MIPS_REL32 3 /* PC relative 32 bit */
-#define R_MIPS_26 4 /* Direct 26 bit shifted */
-#define R_MIPS_HI16 5 /* High 16 bit */
-#define R_MIPS_LO16 6 /* Low 16 bit */
-#define R_MIPS_GPREL16 7 /* GP relative 16 bit */
-#define R_MIPS_LITERAL 8 /* 16 bit literal entry */
-#define R_MIPS_GOT16 9 /* 16 bit GOT entry */
-#define R_MIPS_PC16 10 /* PC relative 16 bit */
-#define R_MIPS_CALL16 11 /* 16 bit GOT entry for function */
-#define R_MIPS_GPREL32 12 /* GP relative 32 bit */
-
-#define R_MIPS_SHIFT5 16
-#define R_MIPS_SHIFT6 17
-#define R_MIPS_64 18
-#define R_MIPS_GOT_DISP 19
-#define R_MIPS_GOT_PAGE 20
-#define R_MIPS_GOT_OFST 21
-#define R_MIPS_GOT_HI16 22
-#define R_MIPS_GOT_LO16 23
-#define R_MIPS_SUB 24
-#define R_MIPS_INSERT_A 25
-#define R_MIPS_INSERT_B 26
-#define R_MIPS_DELETE 27
-#define R_MIPS_HIGHER 28
-#define R_MIPS_HIGHEST 29
-#define R_MIPS_CALL_HI16 30
-#define R_MIPS_CALL_LO16 31
-#define R_MIPS_SCN_DISP 32
-#define R_MIPS_REL16 33
-#define R_MIPS_ADD_IMMEDIATE 34
-#define R_MIPS_PJUMP 35
-#define R_MIPS_RELGOT 36
-#define R_MIPS_JALR 37
-/* Keep this the last entry. */
-#define R_MIPS_NUM 38
-
-/* Legal values for p_type field of Elf32_Phdr. */
-
-#define PT_MIPS_REGINFO 0x70000000 /* Register usage information */
-#define PT_MIPS_RTPROC 0x70000001 /* Runtime procedure table. */
-#define PT_MIPS_OPTIONS 0x70000002
-
-/* Special program header types. */
-
-#define PF_MIPS_LOCAL 0x10000000
-
-/* Legal values for d_tag field of Elf32_Dyn. */
-
-#define DT_MIPS_RLD_VERSION 0x70000001 /* Runtime linker interface version */
-#define DT_MIPS_TIME_STAMP 0x70000002 /* Timestamp */
-#define DT_MIPS_ICHECKSUM 0x70000003 /* Checksum */
-#define DT_MIPS_IVERSION 0x70000004 /* Version string (string tbl index) */
-#define DT_MIPS_FLAGS 0x70000005 /* Flags */
-#define DT_MIPS_BASE_ADDRESS 0x70000006 /* Base address */
-#define DT_MIPS_MSYM 0x70000007
-#define DT_MIPS_CONFLICT 0x70000008 /* Address of CONFLICT section */
-#define DT_MIPS_LIBLIST 0x70000009 /* Address of LIBLIST section */
-#define DT_MIPS_LOCAL_GOTNO 0x7000000a /* Number of local GOT entries */
-#define DT_MIPS_CONFLICTNO 0x7000000b /* Number of CONFLICT entries */
-#define DT_MIPS_LIBLISTNO 0x70000010 /* Number of LIBLIST entries */
-#define DT_MIPS_SYMTABNO 0x70000011 /* Number of DYNSYM entries */
-#define DT_MIPS_UNREFEXTNO 0x70000012 /* First external DYNSYM */
-#define DT_MIPS_GOTSYM 0x70000013 /* First GOT entry in DYNSYM */
-#define DT_MIPS_HIPAGENO 0x70000014 /* Number of GOT page table entries */
-#define DT_MIPS_RLD_MAP 0x70000016 /* Address of run time loader map. */
-#define DT_MIPS_DELTA_CLASS 0x70000017 /* Delta C++ class definition. */
-#define DT_MIPS_DELTA_CLASS_NO 0x70000018 /* Number of entries in
- DT_MIPS_DELTA_CLASS. */
-#define DT_MIPS_DELTA_INSTANCE 0x70000019 /* Delta C++ class instances. */
-#define DT_MIPS_DELTA_INSTANCE_NO 0x7000001a /* Number of entries in
- DT_MIPS_DELTA_INSTANCE. */
-#define DT_MIPS_DELTA_RELOC 0x7000001b /* Delta relocations. */
-#define DT_MIPS_DELTA_RELOC_NO 0x7000001c /* Number of entries in
- DT_MIPS_DELTA_RELOC. */
-#define DT_MIPS_DELTA_SYM 0x7000001d /* Delta symbols that Delta
- relocations refer to. */
-#define DT_MIPS_DELTA_SYM_NO 0x7000001e /* Number of entries in
- DT_MIPS_DELTA_SYM. */
-#define DT_MIPS_DELTA_CLASSSYM 0x70000020 /* Delta symbols that hold the
- class declaration. */
-#define DT_MIPS_DELTA_CLASSSYM_NO 0x70000021 /* Number of entries in
- DT_MIPS_DELTA_CLASSSYM. */
-#define DT_MIPS_CXX_FLAGS 0x70000022 /* Flags indicating for C++ flavor. */
-#define DT_MIPS_PIXIE_INIT 0x70000023
-#define DT_MIPS_SYMBOL_LIB 0x70000024
-#define DT_MIPS_LOCALPAGE_GOTIDX 0x70000025
-#define DT_MIPS_LOCAL_GOTIDX 0x70000026
-#define DT_MIPS_HIDDEN_GOTIDX 0x70000027
-#define DT_MIPS_PROTECTED_GOTIDX 0x70000028
-#define DT_MIPS_OPTIONS 0x70000029 /* Address of .options. */
-#define DT_MIPS_INTERFACE 0x7000002a /* Address of .interface. */
-#define DT_MIPS_DYNSTR_ALIGN 0x7000002b
-#define DT_MIPS_INTERFACE_SIZE 0x7000002c /* Size of the .interface section. */
-#define DT_MIPS_RLD_TEXT_RESOLVE_ADDR 0x7000002d /* Address of rld_text_rsolve
- function stored in GOT. */
-#define DT_MIPS_PERF_SUFFIX 0x7000002e /* Default suffix of dso to be added
- by rld on dlopen() calls. */
-#define DT_MIPS_COMPACT_SIZE 0x7000002f /* (O32)Size of compact rel section. */
-#define DT_MIPS_GP_VALUE 0x70000030 /* GP value for aux GOTs. */
-#define DT_MIPS_AUX_DYNAMIC 0x70000031 /* Address of aux .dynamic. */
-#define DT_MIPS_NUM 0x32
-
-/* Legal values for DT_MIPS_FLAGS Elf32_Dyn entry. */
-
-#define RHF_NONE 0 /* No flags */
-#define RHF_QUICKSTART (1 << 0) /* Use quickstart */
-#define RHF_NOTPOT (1 << 1) /* Hash size not power of 2 */
-#define RHF_NO_LIBRARY_REPLACEMENT (1 << 2) /* Ignore LD_LIBRARY_PATH */
-#define RHF_NO_MOVE (1 << 3)
-#define RHF_SGI_ONLY (1 << 4)
-#define RHF_GUARANTEE_INIT (1 << 5)
-#define RHF_DELTA_C_PLUS_PLUS (1 << 6)
-#define RHF_GUARANTEE_START_INIT (1 << 7)
-#define RHF_PIXIE (1 << 8)
-#define RHF_DEFAULT_DELAY_LOAD (1 << 9)
-#define RHF_REQUICKSTART (1 << 10)
-#define RHF_REQUICKSTARTED (1 << 11)
-#define RHF_CORD (1 << 12)
-#define RHF_NO_UNRES_UNDEF (1 << 13)
-#define RHF_RLD_ORDER_SAFE (1 << 14)
-
-/* Entries found in sections of type SHT_MIPS_LIBLIST. */
-
-typedef struct
-{
- Elf32_Word l_name; /* Name (string table index) */
- Elf32_Word l_time_stamp; /* Timestamp */
- Elf32_Word l_checksum; /* Checksum */
- Elf32_Word l_version; /* Interface version */
- Elf32_Word l_flags; /* Flags */
-} Elf32_Lib;
-
-typedef struct
-{
- Elf64_Word l_name; /* Name (string table index) */
- Elf64_Word l_time_stamp; /* Timestamp */
- Elf64_Word l_checksum; /* Checksum */
- Elf64_Word l_version; /* Interface version */
- Elf64_Word l_flags; /* Flags */
-} Elf64_Lib;
-
-
-/* Legal values for l_flags. */
-
-#define LL_NONE 0
-#define LL_EXACT_MATCH (1 << 0) /* Require exact match */
-#define LL_IGNORE_INT_VER (1 << 1) /* Ignore interface version */
-#define LL_REQUIRE_MINOR (1 << 2)
-#define LL_EXPORTS (1 << 3)
-#define LL_DELAY_LOAD (1 << 4)
-#define LL_DELTA (1 << 5)
-
-/* Entries found in sections of type SHT_MIPS_CONFLICT. */
-
-typedef Elf32_Addr Elf32_Conflict;
-
-
-/* HPPA specific definitions. */
-
-/* Legal values for e_flags field of Elf32_Ehdr. */
-
-#define EF_PARISC_TRAPNIL 0x00010000 /* Trap nil pointer dereference. */
-#define EF_PARISC_EXT 0x00020000 /* Program uses arch. extensions. */
-#define EF_PARISC_LSB 0x00040000 /* Program expects little endian. */
-#define EF_PARISC_WIDE 0x00080000 /* Program expects wide mode. */
-#define EF_PARISC_NO_KABP 0x00100000 /* No kernel assisted branch
- prediction. */
-#define EF_PARISC_LAZYSWAP 0x00400000 /* Allow lazy swapping. */
-#define EF_PARISC_ARCH 0x0000ffff /* Architecture version. */
-
-/* Defined values for `e_flags & EF_PARISC_ARCH' are: */
-
-#define EFA_PARISC_1_0 0x020b /* PA-RISC 1.0 big-endian. */
-#define EFA_PARISC_1_1 0x0210 /* PA-RISC 1.1 big-endian. */
-#define EFA_PARISC_2_0 0x0214 /* PA-RISC 2.0 big-endian. */
-
-/* Additional section indeces. */
-
-#define SHN_PARISC_ANSI_COMMON 0xff00 /* Section for tenatively declared
- symbols in ANSI C. */
-#define SHN_PARISC_HUGE_COMMON 0xff01 /* Common blocks in huge model. */
-
-/* Legal values for sh_type field of Elf32_Shdr. */
-
-#define SHT_PARISC_EXT 0x70000000 /* Contains product specific ext. */
-#define SHT_PARISC_UNWIND 0x70000001 /* Unwind information. */
-#define SHT_PARISC_DOC 0x70000002 /* Debug info for optimized code. */
-
-/* Legal values for sh_flags field of Elf32_Shdr. */
-
-#define SHF_PARISC_SHORT 0x20000000 /* Section with short addressing. */
-#define SHF_PARISC_HUGE 0x40000000 /* Section far from gp. */
-#define SHF_PARISC_SBP 0x80000000 /* Static branch prediction code. */
-
-/* Legal values for ST_TYPE subfield of st_info (symbol type). */
-
-#define STT_PARISC_MILLICODE 13 /* Millicode function entry point. */
-
-#define STT_HP_OPAQUE (STT_LOOS + 0x1)
-#define STT_HP_STUB (STT_LOOS + 0x2)
-
-/* HPPA relocs. */
-
-#define R_PARISC_NONE 0 /* No reloc. */
-#define R_PARISC_DIR32 1 /* Direct 32-bit reference. */
-#define R_PARISC_DIR21L 2 /* Left 21 bits of eff. address. */
-#define R_PARISC_DIR17R 3 /* Right 17 bits of eff. address. */
-#define R_PARISC_DIR17F 4 /* 17 bits of eff. address. */
-#define R_PARISC_DIR14R 6 /* Right 14 bits of eff. address. */
-#define R_PARISC_PCREL32 9 /* 32-bit rel. address. */
-#define R_PARISC_PCREL21L 10 /* Left 21 bits of rel. address. */
-#define R_PARISC_PCREL17R 11 /* Right 17 bits of rel. address. */
-#define R_PARISC_PCREL17F 12 /* 17 bits of rel. address. */
-#define R_PARISC_PCREL14R 14 /* Right 14 bits of rel. address. */
-#define R_PARISC_DPREL21L 18 /* Left 21 bits of rel. address. */
-#define R_PARISC_DPREL14R 22 /* Right 14 bits of rel. address. */
-#define R_PARISC_GPREL21L 26 /* GP-relative, left 21 bits. */
-#define R_PARISC_GPREL14R 30 /* GP-relative, right 14 bits. */
-#define R_PARISC_LTOFF21L 34 /* LT-relative, left 21 bits. */
-#define R_PARISC_LTOFF14R 38 /* LT-relative, right 14 bits. */
-#define R_PARISC_SECREL32 41 /* 32 bits section rel. address. */
-#define R_PARISC_SEGBASE 48 /* No relocation, set segment base. */
-#define R_PARISC_SEGREL32 49 /* 32 bits segment rel. address. */
-#define R_PARISC_PLTOFF21L 50 /* PLT rel. address, left 21 bits. */
-#define R_PARISC_PLTOFF14R 54 /* PLT rel. address, right 14 bits. */
-#define R_PARISC_LTOFF_FPTR32 57 /* 32 bits LT-rel. function pointer. */
-#define R_PARISC_LTOFF_FPTR21L 58 /* LT-rel. fct ptr, left 21 bits. */
-#define R_PARISC_LTOFF_FPTR14R 62 /* LT-rel. fct ptr, right 14 bits. */
-#define R_PARISC_FPTR64 64 /* 64 bits function address. */
-#define R_PARISC_PLABEL32 65 /* 32 bits function address. */
-#define R_PARISC_PCREL64 72 /* 64 bits PC-rel. address. */
-#define R_PARISC_PCREL22F 74 /* 22 bits PC-rel. address. */
-#define R_PARISC_PCREL14WR 75 /* PC-rel. address, right 14 bits. */
-#define R_PARISC_PCREL14DR 76 /* PC rel. address, right 14 bits. */
-#define R_PARISC_PCREL16F 77 /* 16 bits PC-rel. address. */
-#define R_PARISC_PCREL16WF 78 /* 16 bits PC-rel. address. */
-#define R_PARISC_PCREL16DF 79 /* 16 bits PC-rel. address. */
-#define R_PARISC_DIR64 80 /* 64 bits of eff. address. */
-#define R_PARISC_DIR14WR 83 /* 14 bits of eff. address. */
-#define R_PARISC_DIR14DR 84 /* 14 bits of eff. address. */
-#define R_PARISC_DIR16F 85 /* 16 bits of eff. address. */
-#define R_PARISC_DIR16WF 86 /* 16 bits of eff. address. */
-#define R_PARISC_DIR16DF 87 /* 16 bits of eff. address. */
-#define R_PARISC_GPREL64 88 /* 64 bits of GP-rel. address. */
-#define R_PARISC_GPREL14WR 91 /* GP-rel. address, right 14 bits. */
-#define R_PARISC_GPREL14DR 92 /* GP-rel. address, right 14 bits. */
-#define R_PARISC_GPREL16F 93 /* 16 bits GP-rel. address. */
-#define R_PARISC_GPREL16WF 94 /* 16 bits GP-rel. address. */
-#define R_PARISC_GPREL16DF 95 /* 16 bits GP-rel. address. */
-#define R_PARISC_LTOFF64 96 /* 64 bits LT-rel. address. */
-#define R_PARISC_LTOFF14WR 99 /* LT-rel. address, right 14 bits. */
-#define R_PARISC_LTOFF14DR 100 /* LT-rel. address, right 14 bits. */
-#define R_PARISC_LTOFF16F 101 /* 16 bits LT-rel. address. */
-#define R_PARISC_LTOFF16WF 102 /* 16 bits LT-rel. address. */
-#define R_PARISC_LTOFF16DF 103 /* 16 bits LT-rel. address. */
-#define R_PARISC_SECREL64 104 /* 64 bits section rel. address. */
-#define R_PARISC_SEGREL64 112 /* 64 bits segment rel. address. */
-#define R_PARISC_PLTOFF14WR 115 /* PLT-rel. address, right 14 bits. */
-#define R_PARISC_PLTOFF14DR 116 /* PLT-rel. address, right 14 bits. */
-#define R_PARISC_PLTOFF16F 117 /* 16 bits LT-rel. address. */
-#define R_PARISC_PLTOFF16WF 118 /* 16 bits PLT-rel. address. */
-#define R_PARISC_PLTOFF16DF 119 /* 16 bits PLT-rel. address. */
-#define R_PARISC_LTOFF_FPTR64 120 /* 64 bits LT-rel. function ptr. */
-#define R_PARISC_LTOFF_FPTR14WR 123 /* LT-rel. fct. ptr., right 14 bits. */
-#define R_PARISC_LTOFF_FPTR14DR 124 /* LT-rel. fct. ptr., right 14 bits. */
-#define R_PARISC_LTOFF_FPTR16F 125 /* 16 bits LT-rel. function ptr. */
-#define R_PARISC_LTOFF_FPTR16WF 126 /* 16 bits LT-rel. function ptr. */
-#define R_PARISC_LTOFF_FPTR16DF 127 /* 16 bits LT-rel. function ptr. */
-#define R_PARISC_LORESERVE 128
-#define R_PARISC_COPY 128 /* Copy relocation. */
-#define R_PARISC_IPLT 129 /* Dynamic reloc, imported PLT */
-#define R_PARISC_EPLT 130 /* Dynamic reloc, exported PLT */
-#define R_PARISC_TPREL32 153 /* 32 bits TP-rel. address. */
-#define R_PARISC_TPREL21L 154 /* TP-rel. address, left 21 bits. */
-#define R_PARISC_TPREL14R 158 /* TP-rel. address, right 14 bits. */
-#define R_PARISC_LTOFF_TP21L 162 /* LT-TP-rel. address, left 21 bits. */
-#define R_PARISC_LTOFF_TP14R 166 /* LT-TP-rel. address, right 14 bits.*/
-#define R_PARISC_LTOFF_TP14F 167 /* 14 bits LT-TP-rel. address. */
-#define R_PARISC_TPREL64 216 /* 64 bits TP-rel. address. */
-#define R_PARISC_TPREL14WR 219 /* TP-rel. address, right 14 bits. */
-#define R_PARISC_TPREL14DR 220 /* TP-rel. address, right 14 bits. */
-#define R_PARISC_TPREL16F 221 /* 16 bits TP-rel. address. */
-#define R_PARISC_TPREL16WF 222 /* 16 bits TP-rel. address. */
-#define R_PARISC_TPREL16DF 223 /* 16 bits TP-rel. address. */
-#define R_PARISC_LTOFF_TP64 224 /* 64 bits LT-TP-rel. address. */
-#define R_PARISC_LTOFF_TP14WR 227 /* LT-TP-rel. address, right 14 bits.*/
-#define R_PARISC_LTOFF_TP14DR 228 /* LT-TP-rel. address, right 14 bits.*/
-#define R_PARISC_LTOFF_TP16F 229 /* 16 bits LT-TP-rel. address. */
-#define R_PARISC_LTOFF_TP16WF 230 /* 16 bits LT-TP-rel. address. */
-#define R_PARISC_LTOFF_TP16DF 231 /* 16 bits LT-TP-rel. address. */
-#define R_PARISC_HIRESERVE 255
-
-/* Legal values for p_type field of Elf32_Phdr/Elf64_Phdr. */
-
-#define PT_HP_TLS (PT_LOOS + 0x0)
-#define PT_HP_CORE_NONE (PT_LOOS + 0x1)
-#define PT_HP_CORE_VERSION (PT_LOOS + 0x2)
-#define PT_HP_CORE_KERNEL (PT_LOOS + 0x3)
-#define PT_HP_CORE_COMM (PT_LOOS + 0x4)
-#define PT_HP_CORE_PROC (PT_LOOS + 0x5)
-#define PT_HP_CORE_LOADABLE (PT_LOOS + 0x6)
-#define PT_HP_CORE_STACK (PT_LOOS + 0x7)
-#define PT_HP_CORE_SHM (PT_LOOS + 0x8)
-#define PT_HP_CORE_MMF (PT_LOOS + 0x9)
-#define PT_HP_PARALLEL (PT_LOOS + 0x10)
-#define PT_HP_FASTBIND (PT_LOOS + 0x11)
-#define PT_HP_OPT_ANNOT (PT_LOOS + 0x12)
-#define PT_HP_HSL_ANNOT (PT_LOOS + 0x13)
-#define PT_HP_STACK (PT_LOOS + 0x14)
-
-#define PT_PARISC_ARCHEXT 0x70000000
-#define PT_PARISC_UNWIND 0x70000001
-
-/* Legal values for p_flags field of Elf32_Phdr/Elf64_Phdr. */
-
-#define PF_PARISC_SBP 0x08000000
-
-#define PF_HP_PAGE_SIZE 0x00100000
-#define PF_HP_FAR_SHARED 0x00200000
-#define PF_HP_NEAR_SHARED 0x00400000
-#define PF_HP_CODE 0x01000000
-#define PF_HP_MODIFY 0x02000000
-#define PF_HP_LAZYSWAP 0x04000000
-#define PF_HP_SBP 0x08000000
-
-
-/* Alpha specific definitions. */
-
-/* Legal values for e_flags field of Elf64_Ehdr. */
-
-#define EF_ALPHA_32BIT 1 /* All addresses must be < 2GB. */
-#define EF_ALPHA_CANRELAX 2 /* Relocations for relaxing exist. */
-
-/* Legal values for sh_type field of Elf64_Shdr. */
-
-/* These two are primerily concerned with ECOFF debugging info. */
-#define SHT_ALPHA_DEBUG 0x70000001
-#define SHT_ALPHA_REGINFO 0x70000002
-
-/* Legal values for sh_flags field of Elf64_Shdr. */
-
-#define SHF_ALPHA_GPREL 0x10000000
-
-/* Legal values for st_other field of Elf64_Sym. */
-#define STO_ALPHA_NOPV 0x80 /* No PV required. */
-#define STO_ALPHA_STD_GPLOAD 0x88 /* PV only used for initial ldgp. */
-
-/* Alpha relocs. */
-
-#define R_ALPHA_NONE 0 /* No reloc */
-#define R_ALPHA_REFLONG 1 /* Direct 32 bit */
-#define R_ALPHA_REFQUAD 2 /* Direct 64 bit */
-#define R_ALPHA_GPREL32 3 /* GP relative 32 bit */
-#define R_ALPHA_LITERAL 4 /* GP relative 16 bit w/optimization */
-#define R_ALPHA_LITUSE 5 /* Optimization hint for LITERAL */
-#define R_ALPHA_GPDISP 6 /* Add displacement to GP */
-#define R_ALPHA_BRADDR 7 /* PC+4 relative 23 bit shifted */
-#define R_ALPHA_HINT 8 /* PC+4 relative 16 bit shifted */
-#define R_ALPHA_SREL16 9 /* PC relative 16 bit */
-#define R_ALPHA_SREL32 10 /* PC relative 32 bit */
-#define R_ALPHA_SREL64 11 /* PC relative 64 bit */
-#define R_ALPHA_OP_PUSH 12 /* OP stack push */
-#define R_ALPHA_OP_STORE 13 /* OP stack pop and store */
-#define R_ALPHA_OP_PSUB 14 /* OP stack subtract */
-#define R_ALPHA_OP_PRSHIFT 15 /* OP stack right shift */
-#define R_ALPHA_GPVALUE 16
-#define R_ALPHA_GPRELHIGH 17
-#define R_ALPHA_GPRELLOW 18
-#define R_ALPHA_IMMED_GP_16 19
-#define R_ALPHA_IMMED_GP_HI32 20
-#define R_ALPHA_IMMED_SCN_HI32 21
-#define R_ALPHA_IMMED_BR_HI32 22
-#define R_ALPHA_IMMED_LO32 23
-#define R_ALPHA_COPY 24 /* Copy symbol at runtime */
-#define R_ALPHA_GLOB_DAT 25 /* Create GOT entry */
-#define R_ALPHA_JMP_SLOT 26 /* Create PLT entry */
-#define R_ALPHA_RELATIVE 27 /* Adjust by program base */
-/* Keep this the last entry. */
-#define R_ALPHA_NUM 28
-
-
-/* PowerPC specific declarations */
-
-/* Values for Elf32/64_Ehdr.e_flags. */
-#define EF_PPC_EMB 0x80000000 /* PowerPC embedded flag */
-
-/* Cygnus local bits below */
-#define EF_PPC_RELOCATABLE 0x00010000 /* PowerPC -mrelocatable flag*/
-#define EF_PPC_RELOCATABLE_LIB 0x00008000 /* PowerPC -mrelocatable-lib
- flag */
-
-/* PowerPC relocations defined by the ABIs */
-#define R_PPC_NONE 0
-#define R_PPC_ADDR32 1 /* 32bit absolute address */
-#define R_PPC_ADDR24 2 /* 26bit address, 2 bits ignored. */
-#define R_PPC_ADDR16 3 /* 16bit absolute address */
-#define R_PPC_ADDR16_LO 4 /* lower 16bit of absolute address */
-#define R_PPC_ADDR16_HI 5 /* high 16bit of absolute address */
-#define R_PPC_ADDR16_HA 6 /* adjusted high 16bit */
-#define R_PPC_ADDR14 7 /* 16bit address, 2 bits ignored */
-#define R_PPC_ADDR14_BRTAKEN 8
-#define R_PPC_ADDR14_BRNTAKEN 9
-#define R_PPC_REL24 10 /* PC relative 26 bit */
-#define R_PPC_REL14 11 /* PC relative 16 bit */
-#define R_PPC_REL14_BRTAKEN 12
-#define R_PPC_REL14_BRNTAKEN 13
-#define R_PPC_GOT16 14
-#define R_PPC_GOT16_LO 15
-#define R_PPC_GOT16_HI 16
-#define R_PPC_GOT16_HA 17
-#define R_PPC_PLTREL24 18
-#define R_PPC_COPY 19
-#define R_PPC_GLOB_DAT 20
-#define R_PPC_JMP_SLOT 21
-#define R_PPC_RELATIVE 22
-#define R_PPC_LOCAL24PC 23
-#define R_PPC_UADDR32 24
-#define R_PPC_UADDR16 25
-#define R_PPC_REL32 26
-#define R_PPC_PLT32 27
-#define R_PPC_PLTREL32 28
-#define R_PPC_PLT16_LO 29
-#define R_PPC_PLT16_HI 30
-#define R_PPC_PLT16_HA 31
-#define R_PPC_SDAREL16 32
-#define R_PPC_SECTOFF 33
-#define R_PPC_SECTOFF_LO 34
-#define R_PPC_SECTOFF_HI 35
-#define R_PPC_SECTOFF_HA 36
-/* Keep this the last entry. */
-#define R_PPC_NUM 37
-
-/* The remaining relocs are from the Embedded ELF ABI, and are not
- in the SVR4 ELF ABI. */
-#define R_PPC_EMB_NADDR32 101
-#define R_PPC_EMB_NADDR16 102
-#define R_PPC_EMB_NADDR16_LO 103
-#define R_PPC_EMB_NADDR16_HI 104
-#define R_PPC_EMB_NADDR16_HA 105
-#define R_PPC_EMB_SDAI16 106
-#define R_PPC_EMB_SDA2I16 107
-#define R_PPC_EMB_SDA2REL 108
-#define R_PPC_EMB_SDA21 109 /* 16 bit offset in SDA */
-#define R_PPC_EMB_MRKREF 110
-#define R_PPC_EMB_RELSEC16 111
-#define R_PPC_EMB_RELST_LO 112
-#define R_PPC_EMB_RELST_HI 113
-#define R_PPC_EMB_RELST_HA 114
-#define R_PPC_EMB_BIT_FLD 115
-#define R_PPC_EMB_RELSDA 116 /* 16 bit relative offset in SDA */
-
-/* Diab tool relocations. */
-#define R_PPC_DIAB_SDA21_LO 180 /* like EMB_SDA21, but lower 16 bit */
-#define R_PPC_DIAB_SDA21_HI 181 /* like EMB_SDA21, but high 16 bit */
-#define R_PPC_DIAB_SDA21_HA 182 /* like EMB_SDA21, adjusted high 16 */
-#define R_PPC_DIAB_RELSDA_LO 183 /* like EMB_RELSDA, but lower 16 bit */
-#define R_PPC_DIAB_RELSDA_HI 184 /* like EMB_RELSDA, but high 16 bit */
-#define R_PPC_DIAB_RELSDA_HA 185 /* like EMB_RELSDA, adjusted high 16 */
-
-/* This is a phony reloc to handle any old fashioned TOC16 references
- that may still be in object files. */
-#define R_PPC_TOC16 255
-
-
-/* ARM specific declarations */
-
-/* Processor specific flags for the ELF header e_flags field. */
-#define EF_ARM_RELEXEC 0x01
-#define EF_ARM_HASENTRY 0x02
-#define EF_ARM_INTERWORK 0x04
-#define EF_ARM_APCS_26 0x08
-#define EF_ARM_APCS_FLOAT 0x10
-#define EF_ARM_PIC 0x20
-#define EF_ARM_ALIGN8 0x40 /* 8-bit structure alignment is in use */
-#define EF_ARM_NEW_ABI 0x80
-#define EF_ARM_OLD_ABI 0x100
-
-/* Other constants defined in the ARM ELF spec. version B-01. */
-/* NB. These conflict with values defined above. */
-#define EF_ARM_SYMSARESORTED 0x04
-#define EF_ARM_DYNSYMSUSESEGIDX 0x08
-#define EF_ARM_MAPSYMSFIRST 0x10
-#define EF_ARM_EABIMASK 0XFF000000
-
-#define EF_ARM_EABI_VERSION(flags) ((flags) & EF_ARM_EABIMASK)
-#define EF_ARM_EABI_UNKNOWN 0x00000000
-#define EF_ARM_EABI_VER1 0x01000000
-#define EF_ARM_EABI_VER2 0x02000000
-
-/* Additional symbol types for Thumb */
-#define STT_ARM_TFUNC 0xd
-
-/* ARM-specific values for sh_flags */
-#define SHF_ARM_ENTRYSECT 0x10000000 /* Section contains an entry point */
-#define SHF_ARM_COMDEF 0x80000000 /* Section may be multiply defined
- in the input to a link step */
-
-/* ARM-specific program header flags */
-#define PF_ARM_SB 0x10000000 /* Segment contains the location
- addressed by the static base */
-
-/* ARM relocs. */
-#define R_ARM_NONE 0 /* No reloc */
-#define R_ARM_PC24 1 /* PC relative 26 bit branch */
-#define R_ARM_ABS32 2 /* Direct 32 bit */
-#define R_ARM_REL32 3 /* PC relative 32 bit */
-#define R_ARM_PC13 4
-#define R_ARM_ABS16 5 /* Direct 16 bit */
-#define R_ARM_ABS12 6 /* Direct 12 bit */
-#define R_ARM_THM_ABS5 7
-#define R_ARM_ABS8 8 /* Direct 8 bit */
-#define R_ARM_SBREL32 9
-#define R_ARM_THM_PC22 10
-#define R_ARM_THM_PC8 11
-#define R_ARM_AMP_VCALL9 12
-#define R_ARM_SWI24 13
-#define R_ARM_THM_SWI8 14
-#define R_ARM_XPC25 15
-#define R_ARM_THM_XPC22 16
-#define R_ARM_COPY 20 /* Copy symbol at runtime */
-#define R_ARM_GLOB_DAT 21 /* Create GOT entry */
-#define R_ARM_JUMP_SLOT 22 /* Create PLT entry */
-#define R_ARM_RELATIVE 23 /* Adjust by program base */
-#define R_ARM_GOTOFF 24 /* 32 bit offset to GOT */
-#define R_ARM_GOTPC 25 /* 32 bit PC relative offset to GOT */
-#define R_ARM_GOT32 26 /* 32 bit GOT entry */
-#define R_ARM_PLT32 27 /* 32 bit PLT address */
-#define R_ARM_ALU_PCREL_7_0 32
-#define R_ARM_ALU_PCREL_15_8 33
-#define R_ARM_ALU_PCREL_23_15 34
-#define R_ARM_LDR_SBREL_11_0 35
-#define R_ARM_ALU_SBREL_19_12 36
-#define R_ARM_ALU_SBREL_27_20 37
-#define R_ARM_GNU_VTENTRY 100
-#define R_ARM_GNU_VTINHERIT 101
-#define R_ARM_THM_PC11 102 /* thumb unconditional branch */
-#define R_ARM_THM_PC9 103 /* thumb conditional branch */
-#define R_ARM_RXPC25 249
-#define R_ARM_RSBREL32 250
-#define R_ARM_THM_RPC22 251
-#define R_ARM_RREL32 252
-#define R_ARM_RABS22 253
-#define R_ARM_RPC24 254
-#define R_ARM_RBASE 255
-/* Keep this the last entry. */
-#define R_ARM_NUM 256
-
-/* IA-64 specific declarations. */
-
-/* Processor specific flags for the Ehdr e_flags field. */
-#define EF_IA_64_MASKOS 0x0000000f /* os-specific flags */
-#define EF_IA_64_ABI64 0x00000010 /* 64-bit ABI */
-#define EF_IA_64_ARCH 0xff000000 /* arch. version mask */
-
-/* Processor specific values for the Phdr p_type field. */
-#define PT_IA_64_ARCHEXT (PT_LOPROC + 0) /* arch extension bits */
-#define PT_IA_64_UNWIND (PT_LOPROC + 1) /* ia64 unwind bits */
-
-/* Processor specific flags for the Phdr p_flags field. */
-#define PF_IA_64_NORECOV 0x80000000 /* spec insns w/o recovery */
-
-/* Processor specific values for the Shdr sh_type field. */
-#define SHT_IA_64_EXT (SHT_LOPROC + 0) /* extension bits */
-#define SHT_IA_64_UNWIND (SHT_LOPROC + 1) /* unwind bits */
-
-/* Processor specific flags for the Shdr sh_flags field. */
-#define SHF_IA_64_SHORT 0x10000000 /* section near gp */
-#define SHF_IA_64_NORECOV 0x20000000 /* spec insns w/o recovery */
-
-/* Processor specific values for the Dyn d_tag field. */
-#define DT_IA_64_PLT_RESERVE (DT_LOPROC + 0)
-#define DT_IA_64_NUM 1
-
-/* IA-64 relocations. */
-#define R_IA64_NONE 0x00 /* none */
-#define R_IA64_IMM14 0x21 /* symbol + addend, add imm14 */
-#define R_IA64_IMM22 0x22 /* symbol + addend, add imm22 */
-#define R_IA64_IMM64 0x23 /* symbol + addend, mov imm64 */
-#define R_IA64_DIR32MSB 0x24 /* symbol + addend, data4 MSB */
-#define R_IA64_DIR32LSB 0x25 /* symbol + addend, data4 LSB */
-#define R_IA64_DIR64MSB 0x26 /* symbol + addend, data8 MSB */
-#define R_IA64_DIR64LSB 0x27 /* symbol + addend, data8 LSB */
-#define R_IA64_GPREL22 0x2a /* @gprel(sym + add), add imm22 */
-#define R_IA64_GPREL64I 0x2b /* @gprel(sym + add), mov imm64 */
-#define R_IA64_GPREL32MSB 0x2c /* @gprel(sym + add), data4 MSB */
-#define R_IA64_GPREL32LSB 0x2d /* @gprel(sym + add), data4 LSB */
-#define R_IA64_GPREL64MSB 0x2e /* @gprel(sym + add), data8 MSB */
-#define R_IA64_GPREL64LSB 0x2f /* @gprel(sym + add), data8 LSB */
-#define R_IA64_LTOFF22 0x32 /* @ltoff(sym + add), add imm22 */
-#define R_IA64_LTOFF64I 0x33 /* @ltoff(sym + add), mov imm64 */
-#define R_IA64_PLTOFF22 0x3a /* @pltoff(sym + add), add imm22 */
-#define R_IA64_PLTOFF64I 0x3b /* @pltoff(sym + add), mov imm64 */
-#define R_IA64_PLTOFF64MSB 0x3e /* @pltoff(sym + add), data8 MSB */
-#define R_IA64_PLTOFF64LSB 0x3f /* @pltoff(sym + add), data8 LSB */
-#define R_IA64_FPTR64I 0x43 /* @fptr(sym + add), mov imm64 */
-#define R_IA64_FPTR32MSB 0x44 /* @fptr(sym + add), data4 MSB */
-#define R_IA64_FPTR32LSB 0x45 /* @fptr(sym + add), data4 LSB */
-#define R_IA64_FPTR64MSB 0x46 /* @fptr(sym + add), data8 MSB */
-#define R_IA64_FPTR64LSB 0x47 /* @fptr(sym + add), data8 LSB */
-#define R_IA64_PCREL60B 0x48 /* @pcrel(sym + add), brl */
-#define R_IA64_PCREL21B 0x49 /* @pcrel(sym + add), ptb, call */
-#define R_IA64_PCREL21M 0x4a /* @pcrel(sym + add), chk.s */
-#define R_IA64_PCREL21F 0x4b /* @pcrel(sym + add), fchkf */
-#define R_IA64_PCREL32MSB 0x4c /* @pcrel(sym + add), data4 MSB */
-#define R_IA64_PCREL32LSB 0x4d /* @pcrel(sym + add), data4 LSB */
-#define R_IA64_PCREL64MSB 0x4e /* @pcrel(sym + add), data8 MSB */
-#define R_IA64_PCREL64LSB 0x4f /* @pcrel(sym + add), data8 LSB */
-#define R_IA64_LTOFF_FPTR22 0x52 /* @ltoff(@fptr(s+a)), imm22 */
-#define R_IA64_LTOFF_FPTR64I 0x53 /* @ltoff(@fptr(s+a)), imm64 */
-#define R_IA64_LTOFF_FPTR32MSB 0x54 /* @ltoff(@fptr(s+a)), data4 MSB */
-#define R_IA64_LTOFF_FPTR32LSB 0x55 /* @ltoff(@fptr(s+a)), data4 LSB */
-#define R_IA64_LTOFF_FPTR64MSB 0x56 /* @ltoff(@fptr(s+a)), data8 MSB */
-#define R_IA64_LTOFF_FPTR64LSB 0x57 /* @ltoff(@fptr(s+a)), data8 LSB */
-#define R_IA64_SEGREL32MSB 0x5c /* @segrel(sym + add), data4 MSB */
-#define R_IA64_SEGREL32LSB 0x5d /* @segrel(sym + add), data4 LSB */
-#define R_IA64_SEGREL64MSB 0x5e /* @segrel(sym + add), data8 MSB */
-#define R_IA64_SEGREL64LSB 0x5f /* @segrel(sym + add), data8 LSB */
-#define R_IA64_SECREL32MSB 0x64 /* @secrel(sym + add), data4 MSB */
-#define R_IA64_SECREL32LSB 0x65 /* @secrel(sym + add), data4 LSB */
-#define R_IA64_SECREL64MSB 0x66 /* @secrel(sym + add), data8 MSB */
-#define R_IA64_SECREL64LSB 0x67 /* @secrel(sym + add), data8 LSB */
-#define R_IA64_REL32MSB 0x6c /* data 4 + REL */
-#define R_IA64_REL32LSB 0x6d /* data 4 + REL */
-#define R_IA64_REL64MSB 0x6e /* data 8 + REL */
-#define R_IA64_REL64LSB 0x6f /* data 8 + REL */
-#define R_IA64_LTV32MSB 0x74 /* symbol + addend, data4 MSB */
-#define R_IA64_LTV32LSB 0x75 /* symbol + addend, data4 LSB */
-#define R_IA64_LTV64MSB 0x76 /* symbol + addend, data8 MSB */
-#define R_IA64_LTV64LSB 0x77 /* symbol + addend, data8 LSB */
-#define R_IA64_PCREL21BI 0x79 /* @pcrel(sym + add), 21bit inst */
-#define R_IA64_PCREL22 0x7a /* @pcrel(sym + add), 22bit inst */
-#define R_IA64_PCREL64I 0x7b /* @pcrel(sym + add), 64bit inst */
-#define R_IA64_IPLTMSB 0x80 /* dynamic reloc, imported PLT, MSB */
-#define R_IA64_IPLTLSB 0x81 /* dynamic reloc, imported PLT, LSB */
-#define R_IA64_COPY 0x84 /* copy relocation */
-#define R_IA64_SUB 0x85 /* Addend and symbol difference */
-#define R_IA64_LTOFF22X 0x86 /* LTOFF22, relaxable. */
-#define R_IA64_LDXMOV 0x87 /* Use of LTOFF22X. */
-#define R_IA64_TPREL14 0x91 /* @tprel(sym + add), imm14 */
-#define R_IA64_TPREL22 0x92 /* @tprel(sym + add), imm22 */
-#define R_IA64_TPREL64I 0x93 /* @tprel(sym + add), imm64 */
-#define R_IA64_TPREL64MSB 0x96 /* @tprel(sym + add), data8 MSB */
-#define R_IA64_TPREL64LSB 0x97 /* @tprel(sym + add), data8 LSB */
-#define R_IA64_LTOFF_TPREL22 0x9a /* @ltoff(@tprel(s+a)), imm2 */
-#define R_IA64_DTPMOD64MSB 0xa6 /* @dtpmod(sym + add), data8 MSB */
-#define R_IA64_DTPMOD64LSB 0xa7 /* @dtpmod(sym + add), data8 LSB */
-#define R_IA64_LTOFF_DTPMOD22 0xaa /* @ltoff(@dtpmod(sym + add)), imm22 */
-#define R_IA64_DTPREL14 0xb1 /* @dtprel(sym + add), imm14 */
-#define R_IA64_DTPREL22 0xb2 /* @dtprel(sym + add), imm22 */
-#define R_IA64_DTPREL64I 0xb3 /* @dtprel(sym + add), imm64 */
-#define R_IA64_DTPREL32MSB 0xb4 /* @dtprel(sym + add), data4 MSB */
-#define R_IA64_DTPREL32LSB 0xb5 /* @dtprel(sym + add), data4 LSB */
-#define R_IA64_DTPREL64MSB 0xb6 /* @dtprel(sym + add), data8 MSB */
-#define R_IA64_DTPREL64LSB 0xb7 /* @dtprel(sym + add), data8 LSB */
-#define R_IA64_LTOFF_DTPREL22 0xba /* @ltoff(@dtprel(s+a)), imm22 */
-
-/* SH specific declarations */
-
-/* SH relocs. */
-#define R_SH_NONE 0
-#define R_SH_DIR32 1
-#define R_SH_REL32 2
-#define R_SH_DIR8WPN 3
-#define R_SH_IND12W 4
-#define R_SH_DIR8WPL 5
-#define R_SH_DIR8WPZ 6
-#define R_SH_DIR8BP 7
-#define R_SH_DIR8W 8
-#define R_SH_DIR8L 9
-#define R_SH_SWITCH16 25
-#define R_SH_SWITCH32 26
-#define R_SH_USES 27
-#define R_SH_COUNT 28
-#define R_SH_ALIGN 29
-#define R_SH_CODE 30
-#define R_SH_DATA 31
-#define R_SH_LABEL 32
-#define R_SH_SWITCH8 33
-#define R_SH_GNU_VTINHERIT 34
-#define R_SH_GNU_VTENTRY 35
-#define R_SH_GOT32 160
-#define R_SH_PLT32 161
-#define R_SH_COPY 162
-#define R_SH_GLOB_DAT 163
-#define R_SH_JMP_SLOT 164
-#define R_SH_RELATIVE 165
-#define R_SH_GOTOFF 166
-#define R_SH_GOTPC 167
-/* Keep this the last entry. */
-#define R_SH_NUM 256
-
-/* Additional s390 relocs */
-
-#define R_390_NONE 0 /* No reloc. */
-#define R_390_8 1 /* Direct 8 bit. */
-#define R_390_12 2 /* Direct 12 bit. */
-#define R_390_16 3 /* Direct 16 bit. */
-#define R_390_32 4 /* Direct 32 bit. */
-#define R_390_PC32 5 /* PC relative 32 bit. */
-#define R_390_GOT12 6 /* 12 bit GOT offset. */
-#define R_390_GOT32 7 /* 32 bit GOT offset. */
-#define R_390_PLT32 8 /* 32 bit PC relative PLT address. */
-#define R_390_COPY 9 /* Copy symbol at runtime. */
-#define R_390_GLOB_DAT 10 /* Create GOT entry. */
-#define R_390_JMP_SLOT 11 /* Create PLT entry. */
-#define R_390_RELATIVE 12 /* Adjust by program base. */
-#define R_390_GOTOFF 13 /* 32 bit offset to GOT. */
-#define R_390_GOTPC 14 /* 32 bit PC relative offset to GOT. */
-#define R_390_GOT16 15 /* 16 bit GOT offset. */
-#define R_390_PC16 16 /* PC relative 16 bit. */
-#define R_390_PC16DBL 17 /* PC relative 16 bit shifted by 1. */
-#define R_390_PLT16DBL 18 /* 16 bit PC rel. PLT shifted by 1. */
-#define R_390_PC32DBL 19 /* PC relative 32 bit shifted by 1. */
-#define R_390_PLT32DBL 20 /* 32 bit PC rel. PLT shifted by 1. */
-#define R_390_GOTPCDBL 21 /* 32 bit PC rel. GOT shifted by 1. */
-#define R_390_64 22 /* Direct 64 bit. */
-#define R_390_PC64 23 /* PC relative 64 bit. */
-#define R_390_GOT64 24 /* 64 bit GOT offset. */
-#define R_390_PLT64 25 /* 64 bit PC relative PLT address. */
-#define R_390_GOTENT 26 /* 32 bit PC rel. to GOT entry >> 1. */
-
-/* Keep this the last entry. */
-#define R_390_NUM 19
-
-/* CRIS relocations. */
-#define R_CRIS_NONE 0
-#define R_CRIS_8 1
-#define R_CRIS_16 2
-#define R_CRIS_32 3
-#define R_CRIS_8_PCREL 4
-#define R_CRIS_16_PCREL 5
-#define R_CRIS_32_PCREL 6
-#define R_CRIS_GNU_VTINHERIT 7
-#define R_CRIS_GNU_VTENTRY 8
-#define R_CRIS_COPY 9
-#define R_CRIS_GLOB_DAT 10
-#define R_CRIS_JUMP_SLOT 11
-#define R_CRIS_RELATIVE 12
-#define R_CRIS_16_GOT 13
-#define R_CRIS_32_GOT 14
-#define R_CRIS_16_GOTPLT 15
-#define R_CRIS_32_GOTPLT 16
-#define R_CRIS_32_GOTREL 17
-#define R_CRIS_32_PLT_GOTREL 18
-#define R_CRIS_32_PLT_PCREL 19
-
-#define R_CRIS_NUM 20
-
-#define R_MICROBLAZE_NONE 0
-#define R_MICROBLAZE_32 1
-#define R_MICROBLAZE_32_PCREL 2
-#define R_MICROBLAZE_64_PCREL 3
-#define R_MICROBLAZE_32_PCREL_LO 4
-#define R_MICROBLAZE_64 5
-#define R_MICROBLAZE_32_LO 6
-#define R_MICROBLAZE_SRO32 7
-#define R_MICROBLAZE_SRW32 8
-#define R_MICROBLAZE_64_NONE 9
-#define R_MICROBLAZE_32_SYM_OP_SYM 10
-#define R_MICROBLAZE_GNU_VTINHERIT 11
-#define R_MICROBLAZE_GNU_VTENTRY 12
-
-#define R_MICROBLAZE_NUM 13
-
-/* Altera NIOS specific definitions. */
-
-#define FLAT_NIOS2_R_32 0 /* Normal 32-bit reloc */
-#define FLAT_NIOS2_R_HI_LO 1
-#define FLAT_NIOS2_R_HIADJ_LO 2
-#define FLAT_NIOS2_R_CALL26 4
-
-/* NIOS relocations. */
-#define R_NIOS_NONE 0
-#define R_NIOS_32 1 /* A 32 bit absolute relocation.*/
-#define R_NIOS_LO16_LO5 2 /* A LO-16 5 bit absolute relocation. */
-#define R_NIOS_LO16_HI11 3 /* A LO-16 top 11 bit absolute relocation. */
-#define R_NIOS_HI16_LO5 4 /* A HI-16 5 bit absolute relocation. */
-#define R_NIOS_HI16_HI11 5 /* A HI-16 top 11 bit absolute relocation. */
-#define R_NIOS_PCREL6 6 /* A 6 bit relative relocation. */
-#define R_NIOS_PCREL8 7 /* An 8 bit relative relocation. */
-#define R_NIOS_PCREL11 8 /* An 11 bit relative relocation. */
-#define R_NIOS_16 9 /* A 16 bit absolute relocation. */
-#define R_NIOS_H_LO5 10 /* Low 5-bits of absolute relocation in halfwords. */
-#define R_NIOS_H_HI11 11 /* Top 11 bits of 16-bit absolute relocation in halfwords. */
-#define R_NIOS_H_XLO5 12 /* Low 5 bits of top 16-bits of 32-bit absolute relocation in halfwords. */
-#define R_NIOS_H_XHI11 13 /* Top 11 bits of top 16-bits of 32-bit absolute relocation in halfwords. */
-#define R_NIOS_H_16 14 /* Half-word @h value */
-#define R_NIOS_H_32 15 /* Word @h value */
-#define R_NIOS_GNU_VTINHERIT 200 /* GNU extension to record C++ vtable hierarchy */
-#define R_NIOS_GNU_VTENTRY 201 /* GNU extension to record C++ vtable member usage */
-/* Keep this the last entry. */
-#define R_NIOS_NUM 202
-
-/* NIOS II relocations */
-#define R_NIOS2_NONE 0
-#define R_NIOS2_S16 1
-#define R_NIOS2_U16 2
-#define R_NIOS2_PCREL16 3
-#define R_NIOS2_CALL26 4
-#define R_NIOS2_IMM5 5
-#define R_NIOS2_CACHE_OPX 6
-#define R_NIOS2_IMM6 7
-#define R_NIOS2_IMM8 8
-#define R_NIOS2_HI16 9
-#define R_NIOS2_LO16 10
-#define R_NIOS2_HIADJ16 11
-#define R_NIOS2_BFD_RELOC_32 12
-#define R_NIOS2_BFD_RELOC_16 13
-#define R_NIOS2_BFD_RELOC_8 14
-#define R_NIOS2_GPREL 15
-#define R_NIOS2_GNU_VTINHERIT 16
-#define R_NIOS2_GNU_VTENTRY 17
-#define R_NIOS2_UJMP 18
-#define R_NIOS2_CJMP 19
-#define R_NIOS2_CALLR 20
-#define R_NIOS2_ALIGN 21
-/* Keep this the last entry. */
-#define R_NIOS2_NUM 22
-
-#endif /* elf.h */
+++ /dev/null
-
-ENTRY (__start)
-
-MEMORY {
- flatmem : ORIGIN = 0x0, LENGTH = 0xfffffff
-}
-
-SECTIONS {
- .G6 (DEFINED(G6Base) ? G6Base : 0x0) : {
- *(.G6)
- }
- .G7 (DEFINED(G7Base) ? G7Base : 0x0) : {
- *(.G7)
- }
- .G8 (DEFINED(G8Base) ? G8Base : 0x0) : {
- *(.G8)
- }
- .G9 (DEFINED(G9Base) ? G9Base : 0) : {
- *(.G9)
- }
- .G10 (DEFINED(G10Base) ? G10Base : 0) : {
- *(.G10)
- }
- .G11 (DEFINED(G11Base) ? G11Base : 0) : {
- *(.G11)
- }
- .G12 (DEFINED(G12Base) ? G12Base : 0) : {
- *(.G12)
- }
- .G13 (DEFINED(G13Base) ? G13Base : 0) : {
- *(.G13)
- }
- .text 0x0 : {
- . = . + 4;
- . = ALIGN(0x4) ;
- _stext = . ;
- *(.text)
- *(.text.*)
- *(.gnu.warning)
- *(.stub)
- *(.gnu.linkonce.t*)
- *(.glue_7t)
- *(.glue_7)
- *(.jcr)
- *(.init)
- *(.fini)
-
-W_RODAT *(.rodata)
-W_RODAT *(.rodata1)
-W_RODAT *(.rodata.*)
-
- /* This is special code area at the end of the normal
- text section. It contains a small lookup table at
- the start followed by the code pointed to by entries
- in the lookup table. */
- . = ALIGN (4) ;
- PROVIDE(__ctbp = .);
- *(.call_table_data)
- *(.call_table_text)
-
- . = ALIGN(0x20) ;
- _etext = . ;
- } > flatmem
- .data : {
- . = ALIGN(0x4) ;
- _sdata = . ;
- __data_start = . ;
- data_start = . ;
- *(.got.plt)
- *(.got)
- FILL(0) ;
- . = ALIGN(0x20) ;
- LONG(-1)
- . = ALIGN(0x20) ;
-R_RODAT *(.rodata)
-R_RODAT *(.rodata1)
-R_RODAT *(.rodata.*)
- *(.gnu.linkonce.r*)
- *(.data)
- *(.data1)
- *(.data.*)
- *(.gnu.linkonce.d*)
- *(.data1)
- *(.eh_frame)
- *(.gcc_except_table)
-
- /* Microblaze has .sdata and .sbss (small bss). They must
- be contiguous, so please don't move any of this. JW */
- _ssrw = . ;
- *(.sdata)
- *(.sdata.*)
- *(.sbss) /* Don't move this! */
- _essrw = . ;
-
- _ssrw_size = _essrw - _ssrw;
- PROVIDE(_SDA_BASE_ = _ssrw + (_ssrw_size / 2));
-
- *(.gnu.linkonce.s.*)
- *(__libc_atexit)
- *(__libc_subinit)
- *(__libc_subfreeres)
- *(.note.ABI-tag)
-
- /* microblaze-specific read-only small data area
- and associated locating symbols */
- _ssro = . ;
- *(.sdata2)
- _essro = . ;
- _ssro_size = _essro - _ssro;
- PROVIDE(_SDA2_BASE_ = _ssro + (_ssro_size / 2));
-
- . = ALIGN(4) ;
- __CTOR_LIST__ = .;
- LONG((__CTOR_END__ - __CTOR_LIST__) / 4 - 2)
- *(.ctors)
- LONG(0)
- __CTOR_END__ = .;
- __DTOR_LIST__ = .;
- LONG((__DTOR_END__ - __DTOR_LIST__) / 4 - 2)
- *(.dtors)
- LONG(0)
- __DTOR_END__ = .;
-
- . = ALIGN(0x10) ;
- _edata = . ;
- } > flatmem
- .bss : {
- . = ALIGN(0x4) ;
- _sbss = ALIGN(0x4) ;
- __bss_start = . ;
- *(.dynsbss)
- *(.sbss)
- *(.sbss.*)
- *(.scommon)
- *(.dynbss)
- *(.bss)
- *(.bss.*)
- *(.bss*)
- *(.gnu.linkonce.b*)
- *(COMMON)
- . = ALIGN(0x10) ;
- _ebss = . ;
- _end = . ;
- end = . ;
- } > flatmem
-
- .junk 0 : { *(.rel*) *(.rela*) }
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_info 0 : { *(.debug_info) }
- .debug_line 0 : { *(.debug_line) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- .debug_aranges 0 : { *(.debug_aranges) }
-}
+++ /dev/null
-/*
- * elf2flt.c: Convert ELF (or any BFD format) to FLAT binary format
- *
- * (c) 1999-2002, Greg Ungerer <gerg@snapgear.com>
- * Created elf2flt from coff2flt (see copyrights below). Added all the
- * ELF format file handling. Extended relocation support for all of
- * text and data.
- *
- * (c) 2006 Support the -a (use_resolved) option for TARGET_arm.
- * Shaun Jackman <sjackman@gmail.com>
- * (c) 2004, Nios II support, Wentao Xu <wentao@microtronix.com>
- * (c) 2003, H8 support, ktrace <davidm@snapgear.com>
- * (c) 2003-2004, MicroBlaze support, John Williams <jwilliams@itee.uq.edu.au>
- * (c) 2001-2003, arm/arm-pic/arm-big-endian support <davidm@snapgear.com>
- * (c) 2001, v850 changes, Mile Bader <miles@lsi.nec.co.jp>
- * (c) 2003, SuperH support, Paul Mundt <lethal@linux-sh.org>
- * (c) 2001, zflat support <davidm@snapgear.com>
- * (c) 2001, Changes for GOT entries Paul Dale <pauli@snapgear.com> and
- * David McCullough <davidm@snapgear.com>
- *
- * Now supports PIC with GOT tables. This works by taking a '.elf' file
- * and a fully linked elf executable (at address 0) and produces a flat
- * file that can be loaded with some fixups. It still supports the old
- * style fully relocatable elf format files.
- *
- * Originally obj-res.c
- *
- * (c) 1998, Kenneth Albanowski <kjahds@kjahds.com>
- * (c) 1998, D. Jeff Dionne
- * (c) 1998, The Silver Hammer Group Ltd.
- * (c) 1996, 1997 Dionne & Associates <jeff@ryeham.ee.ryerson.ca>
- *
- * This is Free Software, under the GNU Public Licence v2 or greater.
- *
- * Relocation added March 1997, Kresten Krab Thorup
- * krab@california.daimi.aau.dk
- */
-
-#include <stdio.h> /* Userland pieces of the ANSI C standard I/O package */
-#include <stdlib.h> /* Userland prototypes of the ANSI C std lib functions */
-#include <stdarg.h> /* Allows va_list to exist in the these namespaces */
-#include <string.h> /* Userland prototypes of the string handling funcs */
-#include <strings.h>
-#include <unistd.h> /* Userland prototypes of the Unix std system calls */
-#include <fcntl.h> /* Flag value for file handling functions */
-#include <time.h>
-#ifndef WIN32
-#include <netinet/in.h> /* Consts and structs defined by the internet system */
-#define BINARY_FILE_OPTS
-#else
-#include <winsock2.h>
-#define BINARY_FILE_OPTS "b"
-#endif
-
-/* from $(INSTALLDIR)/include */
-#include <bfd.h> /* Main header file for the BFD library */
-
-#if defined(TARGET_h8300)
-#include <elf/h8.h> /* TARGET_* ELF support for the BFD library */
-#elif defined(__CYGWIN__) || defined(__MINGW32__) || defined(TARGET_nios) || defined(TARGET_nios2)
-#include "cygwin-elf.h" /* Cygwin uses a local copy */
-#elif defined(TARGET_microblaze)
-#include <elf/microblaze.h> /* TARGET_* ELF support for the BFD library */
-#elif defined(TARGET_bfin)
-#include "elf/bfin.h"
-#else
-#include <elf.h> /* TARGET_* ELF support for the BFD library */
-#endif
-
-#if defined(__MINGW32__)
-#include <getopt.h>
-#endif
-
-/* from uClinux-x.x.x/include/linux */
-#include "flat.h" /* Binary flat header description */
-
-#ifdef TARGET_e1
-#include <e1.h>
-#endif
-
-#ifdef TARGET_v850e
-#define TARGET_v850
-#endif
-
-#if defined(TARGET_m68k)
-#define ARCH "m68k/coldfire"
-#elif defined(TARGET_arm)
-#define ARCH "arm"
-#elif defined(TARGET_sparc)
-#define ARCH "sparc"
-#elif defined(TARGET_v850)
-#define ARCH "v850"
-#elif defined(TARGET_sh)
-#define ARCH "sh"
-#elif defined(TARGET_h8300)
-#define ARCH "h8300"
-#elif defined(TARGET_microblaze)
-#define ARCH "microblaze"
-#elif defined(TARGET_e1)
-#define ARCH "e1-coff"
-#elif defined(TARGET_bfin)
-#define ARCH "bfin"
-#define FLAT_RELOC_TYPE_TEXT 0
-#define FLAT_RELOC_TYPE_DATA 1
-#define FLAT_RELOC_TYPE_BSS 2
-#define FLAT_RELOC_TYPE_STACK 3
-#define FLAT_RELOC_PART_LO 0
-#define FLAT_RELOC_PART_HI 1
-#define PCREL24_MAGIC_OFFSET -1
-#elif defined(TARGET_nios)
-#define ARCH "nios"
-#elif defined(TARGET_nios2)
-#define ARCH "nios2"
-#else
-#error "Don't know how to support your CPU architecture??"
-#endif
-
-#if defined(TARGET_m68k) || defined(TARGET_h8300) || defined(TARGET_bfin)
-/*
- * Define a maximum number of bytes allowed in the offset table.
- * We'll fail if the table is larger than this.
- *
- * This limit may be different for platforms other than m68k, but
- * 8000 entries is a lot, trust me :-) (davidm)
- */
-#define GOT_LIMIT 32767
-/*
- * we have to mask out the shared library id here and there, this gives
- * us the real address bits when needed
- */
-#define real_address_bits(x) (pic_with_got ? ((x) & 0xffffff) : (x))
-#else
-#define real_address_bits(x) (x)
-#endif
-
-#ifndef O_BINARY
-#define O_BINARY 0
-#endif
-
-
-int verbose = 0; /* extra output when running */
-int pic_with_got = 0; /* do elf/got processing with PIC code */
-int load_to_ram = 0; /* instruct loader to allocate everything into RAM */
-int ktrace = 0; /* instruct loader output kernel trace on load */
-int compress = 0; /* 1 = compress everything, 2 = compress data only */
-int use_resolved = 0; /* If true, get the value of symbol references from */
- /* the program contents, not from the relocation table. */
- /* In this case, the input ELF file must be already */
- /* fully resolved (using the `-q' flag with recent */
- /* versions of GNU ld will give you a fully resolved */
- /* output file with relocation entries). */
-
-const char *progname, *filename;
-int lineno;
-
-int nerrors = 0;
-int nwarnings = 0;
-
-static char where[200];
-
-enum {
- /* Use exactly one of these: */
- E_NOFILE = 0, /* "progname: " */
- E_FILE = 1, /* "filename: " */
- E_FILELINE = 2, /* "filename:lineno: " */
- E_FILEWHERE = 3, /* "filename:%s: " -- set %s with ewhere() */
-
- /* Add in any of these with |': */
- E_WARNING = 0x10,
- E_PERROR = 0x20
-};
-
-void ewhere (const char *format, ...);
-void einfo (int type, const char *format, ...);
-
-
-void
-ewhere (const char *format, ...) {
- va_list args;
- va_start (args, format);
- vsprintf (where, format, args);
- va_end (args);
-}
-
-
-void
-einfo (int type, const char *format, ...) {
- va_list args;
-
- switch (type & 0x0f) {
- case E_NOFILE:
- fprintf (stderr, "%s: ", progname);
- break;
- case E_FILE:
- fprintf (stderr, "%s: ", filename);
- break;
- case E_FILELINE:
- ewhere ("%d", lineno);
- /* fall-through */
- case E_FILEWHERE:
- fprintf (stderr, "%s:%s: ", filename, where);
- break;
- }
-
- if (type & E_WARNING) {
- fprintf (stderr, "warning: ");
- nwarnings++;
- } else {
- nerrors++;
- }
-
- va_start (args, format);
- vfprintf (stderr, format, args);
- va_end (args);
-
- if (type & E_PERROR)
- perror ("");
- else
- fprintf (stderr, "\n");
-}
-
-
-asymbol**
-get_symbols (bfd *abfd, long *num)
-{
- long storage_needed;
- asymbol **symbol_table;
- long number_of_symbols;
-
- storage_needed = bfd_get_symtab_upper_bound (abfd);
-
- if (storage_needed < 0)
- abort ();
-
- if (storage_needed == 0)
- return NULL;
-
- symbol_table = (asymbol **) malloc (storage_needed);
-
- number_of_symbols = bfd_canonicalize_symtab (abfd, symbol_table);
-
- if (number_of_symbols < 0)
- abort ();
-
- *num = number_of_symbols;
- return symbol_table;
-}
-
-
-
-int
-dump_symbols(asymbol **symbol_table, long number_of_symbols)
-{
- long i;
- printf("SYMBOL TABLE:\n");
- for (i=0; i<number_of_symbols; i++) {
- printf(" NAME=%s VALUE=0x%x\n", symbol_table[i]->name,
- symbol_table[i]->value);
- }
- printf("\n");
- return(0);
-}
-
-
-
-long
-get_symbol_offset(char *name, asection *sec, asymbol **symbol_table, long number_of_symbols)
-{
- long i;
- for (i=0; i<number_of_symbols; i++) {
- if (symbol_table[i]->section == sec) {
- if (!strcmp(symbol_table[i]->name, name)) {
- return symbol_table[i]->value;
- }
- }
- }
- return -1;
-}
-
-
-
-long
-get_gp_value(asymbol **symbol_table, long number_of_symbols)
-{
- long i;
- for (i=0; i<number_of_symbols; i++) {
- if (!strcmp(symbol_table[i]->name, "_gp"))
- return symbol_table[i]->value;
- }
- return -1;
-}
-
-
-
-long
-add_com_to_bss(asymbol **symbol_table, long number_of_symbols, long bss_len)
-{
- long i, comsize;
- long offset;
-
- comsize = 0;
- for (i=0; i<number_of_symbols; i++) {
- if (strcmp("*COM*", symbol_table[i]->section->name) == 0) {
- offset = bss_len + comsize;
- comsize += symbol_table[i]->value;
- symbol_table[i]->value = offset;
- }
- }
- return comsize;
-}
-
-#ifdef TARGET_bfin
-/* FUNCTION : weak_und_symbol
- ABSTRACT : return true if symbol is weak and undefined.
-*/
-static int
-weak_und_symbol(const char *reloc_section_name,
- struct bfd_symbol *symbol)
-{
- if (!(strstr (reloc_section_name, "text")
- || strstr (reloc_section_name, "data")
- || strstr (reloc_section_name, "bss"))) {
- if (symbol->flags & BSF_WEAK) {
-#ifdef DEBUG_BFIN
- fprintf(stderr, "found weak undefined symbol %s\n", symbol->name);
-#endif
- return TRUE;
- }
- }
- return FALSE;
-}
-
-static int
-bfin_set_reloc (uint32_t *reloc,
- const char *reloc_section_name,
- const char *sym_name,
- struct bfd_symbol *symbol,
- int sp, int hilo, int32_t offset)
-{
- unsigned int type;
- uint32_t val;
-
- if (strstr (reloc_section_name, "text"))
- type = FLAT_RELOC_TYPE_TEXT;
- else if (strstr (reloc_section_name, "data"))
- type = FLAT_RELOC_TYPE_DATA;
- else if (strstr (reloc_section_name, "bss"))
- type = FLAT_RELOC_TYPE_BSS;
- else if (strstr (reloc_section_name, "stack"))
- type = FLAT_RELOC_TYPE_STACK;
- else if (symbol->flags & BSF_WEAK){
- /* weak symbol support ... if a weak symbol is undefined at the
- end of a final link, it should return 0 rather than error
- We will assume text section for the moment.
- */
- type = FLAT_RELOC_TYPE_TEXT;
- } else if (strstr (reloc_section_name, "*ABS*")){
- /* (A data section initialization of something in the shared libc's text section
- does not resolve - i.e. a global pointer to function initialized with
- a libc function).
- The text section here is appropriate as the section information
- of the shared library is lost. The loader will do some calcs.
- */
- type = FLAT_RELOC_TYPE_TEXT;
- } else {
- printf ("Unknown Type - relocation for %s in bad section - %s\n", sym_name, reloc_section_name);
- return 1;
- }
-
- val = (offset & ((1 << 26) - 1)) << 6;
- val |= (sp & (1 << 3) - 1) << 3;
- val |= (hilo & 1) << 2;
- val |= (type & (1 << 2) - 1);
- *reloc = val;
- return 0;
-}
-#endif
-
-
-uint32_t *
-output_relocs (
- bfd *abs_bfd,
- asymbol **symbols,
- int number_of_symbols,
- unsigned long *n_relocs,
- unsigned char *text, int text_len, unsigned long text_vma,
- unsigned char *data, int data_len, unsigned long data_vma,
- bfd *rel_bfd)
-{
- uint32_t *flat_relocs;
- asection *a, *sym_section, *r;
- arelent **relpp, **p, *q;
- const char *sym_name, *section_name;
- unsigned char *sectionp;
- unsigned long pflags;
- char addstr[16];
- long sym_addr, sym_vma, section_vma;
- int relsize, relcount;
- int flat_reloc_count;
- int sym_reloc_size, rc;
- int got_size = 0;
- int bad_relocs = 0;
- asymbol **symb;
- long nsymb;
-
-#if 0
- printf("%s(%d): output_relocs(abs_bfd=%d,synbols=0x%x,number_of_symbols=%d"
- "n_relocs=0x%x,text=0x%x,text_len=%d,data=0x%x,data_len=%d)\n",
- __FILE__, __LINE__, abs_bfd, symbols, number_of_symbols, n_relocs,
- text, text_len, data, data_len);
-#endif
-
-#if 0
-dump_symbols(symbols, number_of_symbols);
-#endif
-
- *n_relocs = 0;
- flat_relocs = NULL;
- flat_reloc_count = 0;
- rc = 0;
- pflags = 0;
-
- /* Determine how big our offset table is in bytes.
- * This isn't too difficult as we've terminated the table with -1.
- * Also note that both the relocatable and absolute versions have this
- * terminator even though the relocatable one doesn't have the GOT!
- */
- if (pic_with_got && !use_resolved) {
- unsigned long *lp = (unsigned long *)data;
- /* Should call ntohl(*lp) here but is isn't going to matter */
- while (*lp != 0xffffffff) lp++;
- got_size = ((unsigned char *)lp) - data;
- if (verbose)
- printf("GOT table contains %d entries (%d bytes)\n",
- got_size/sizeof(unsigned long), got_size);
-#ifdef TARGET_m68k
- if (got_size > GOT_LIMIT) {
- fprintf(stderr, "GOT too large: %d bytes (limit = %d bytes)\n",
- got_size, GOT_LIMIT);
- exit(1);
- }
-#endif
- }
-
- for (a = abs_bfd->sections; (a != (asection *) NULL); a = a->next) {
- section_vma = bfd_section_vma(abs_bfd, a);
-
- if (verbose)
- printf("SECTION: %s [0x%x]: flags=0x%x vma=0x%x\n", a->name, a,
- a->flags, section_vma);
-
-// if (bfd_is_abs_section(a))
-// continue;
- if (bfd_is_und_section(a))
- continue;
- if (bfd_is_com_section(a))
- continue;
-// if ((a->flags & SEC_RELOC) == 0)
-// continue;
-
- /*
- * Only relocate things in the data sections if we are PIC/GOT.
- * otherwise do text as well
- */
- if (!pic_with_got && (a->flags & SEC_CODE))
- sectionp = text + (a->vma - text_vma);
- else if (a->flags & SEC_DATA)
- sectionp = data + (a->vma - data_vma);
- else
- continue;
-
- /* Now search for the equivalent section in the relocation binary
- * and use that relocation information to build reloc entries
- * for this one.
- */
- for (r=rel_bfd->sections; r != NULL; r=r->next)
- if (strcmp(a->name, r->name) == 0)
- break;
- if (r == NULL)
- continue;
- if (verbose)
- printf(" RELOCS: %s [0x%x]: flags=0x%x vma=0x%x\n", r->name, r,
- r->flags, bfd_section_vma(abs_bfd, r));
- if ((r->flags & SEC_RELOC) == 0)
- continue;
- relsize = bfd_get_reloc_upper_bound(rel_bfd, r);
- if (relsize <= 0) {
- if (verbose)
- printf("%s(%d): no relocation entries section=0x%x\n",
- __FILE__, __LINE__, r->name);
- continue;
- }
-
- symb = get_symbols(rel_bfd, &nsymb);
- relpp = (arelent **) xmalloc(relsize);
- relcount = bfd_canonicalize_reloc(rel_bfd, r, relpp, symb);
- if (relcount <= 0) {
- if (verbose)
- printf("%s(%d): no relocation entries section=%s\n",
- __FILE__, __LINE__, r->name);
- continue;
- } else {
- for (p = relpp; (relcount && (*p != NULL)); p++, relcount--) {
- unsigned char *r_mem;
- int relocation_needed = 0;
-
-#ifdef TARGET_microblaze
- /* The MICROBLAZE_XX_NONE relocs can be skipped.
- They represent PC relative branches that the
- linker has already resolved */
-
- switch ((*p)->howto->type)
- {
- case R_MICROBLAZE_NONE:
- case R_MICROBLAZE_64_NONE:
- continue;
- }
-#endif /* TARGET_microblaze */
-
-#ifdef TARGET_v850
- /* Skip this relocation entirely if possible (we
- do this early, before doing any other
- processing on it). */
- switch ((*p)->howto->type) {
-#ifdef R_V850_9_PCREL
- case R_V850_9_PCREL:
-#endif
-#ifdef R_V850_22_PCREL
- case R_V850_22_PCREL:
-#endif
-#ifdef R_V850_SDA_16_16_OFFSET
- case R_V850_SDA_16_16_OFFSET:
-#endif
-#ifdef R_V850_SDA_15_16_OFFSET
- case R_V850_SDA_15_16_OFFSET:
-#endif
-#ifdef R_V850_ZDA_15_16_OFFSET
- case R_V850_ZDA_15_16_OFFSET:
-#endif
-#ifdef R_V850_TDA_6_8_OFFSET
- case R_V850_TDA_6_8_OFFSET:
-#endif
-#ifdef R_V850_TDA_7_8_OFFSET
- case R_V850_TDA_7_8_OFFSET:
-#endif
-#ifdef R_V850_TDA_7_7_OFFSET
- case R_V850_TDA_7_7_OFFSET:
-#endif
-#ifdef R_V850_TDA_16_16_OFFSET
- case R_V850_TDA_16_16_OFFSET:
-#endif
-#ifdef R_V850_TDA_4_5_OFFSET
- case R_V850_TDA_4_5_OFFSET:
-#endif
-#ifdef R_V850_TDA_4_4_OFFSET
- case R_V850_TDA_4_4_OFFSET:
-#endif
-#ifdef R_V850_SDA_16_16_SPLIT_OFFSET
- case R_V850_SDA_16_16_SPLIT_OFFSET:
-#endif
-#ifdef R_V850_CALLT_6_7_OFFSET
- case R_V850_CALLT_6_7_OFFSET:
-#endif
-#ifdef R_V850_CALLT_16_16_OFFSET
- case R_V850_CALLT_16_16_OFFSET:
-#endif
- /* These are relative relocations, which
- have already been fixed up by the
- linker at this point, so just ignore
- them. */
- continue;
- }
-#endif /* USE_V850_RELOCS */
-
- q = *p;
- if (q->sym_ptr_ptr && *q->sym_ptr_ptr) {
- sym_name = (*(q->sym_ptr_ptr))->name;
- sym_section = (*(q->sym_ptr_ptr))->section;
- section_name=(*(q->sym_ptr_ptr))->section->name;
- } else {
- printf("ERROR: undefined relocation entry\n");
- rc = -1;
- continue;
- }
-#ifndef TARGET_bfin
- /* Adjust the address to account for the GOT table which wasn't
- * present in the relative file link.
- */
- if (pic_with_got && !use_resolved)
- q->address += got_size;
-#endif
-
- /* A pointer to what's being relocated, used often
- below. */
- r_mem = sectionp + q->address;
-
- /*
- * Fixup offset in the actual section.
- */
- addstr[0] = 0;
-#ifndef TARGET_e1
- if ((sym_addr = get_symbol_offset((char *) sym_name,
- sym_section, symbols, number_of_symbols)) == -1) {
- sym_addr = 0;
- }
-#else
- sym_addr = (*(q->sym_ptr_ptr))->value;
-#endif
- if (use_resolved) {
- /* Use the address of the symbol already in
- the program text. How this is handled may
- still depend on the particular relocation
- though. */
- switch (q->howto->type) {
- int r2_type;
-#ifdef TARGET_v850
- case R_V850_HI16_S:
- /* We specially handle adjacent
- HI16_S/ZDA_15_16_OFFSET and
- HI16_S/LO16 pairs that reference the
- same address (these are usually
- movhi/ld and movhi/movea pairs,
- respectively). */
- if (relcount == 0)
- r2_type = R_V850_NONE;
- else
- r2_type = p[1]->howto->type;
- if ((r2_type == R_V850_ZDA_15_16_OFFSET
- || r2_type == R_V850_LO16)
- && (p[0]->sym_ptr_ptr
- == p[1]->sym_ptr_ptr)
- && (p[0]->addend == p[1]->addend))
- {
- relocation_needed = 1;
-
- switch (r2_type) {
- case R_V850_ZDA_15_16_OFFSET:
- pflags = 0x10000000;
- break;
- case R_V850_LO16:
- pflags = 0x20000000;
- break;
- }
-
- /* We don't really need the
- actual value -- the bits
- produced by the linker are
- what we want in the final
- flat file -- but get it
- anyway if useful for
- debugging. */
- if (verbose) {
- unsigned char *r2_mem =
- sectionp
- + p[1]->address;
- /* little-endian */
- int hi = r_mem[0]
- + (r_mem[1] << 8);
- int lo = r2_mem[0]
- + (r2_mem[1] << 8);
- /* Sign extend LO. */
- lo = (lo ^ 0x8000)
- - 0x8000;
-
- /* Maybe ignore the LSB
- of LO, which is
- actually part of the
- instruction. */
- if (r2_type != R_V850_LO16)
- lo &= ~1;
-
- sym_addr =
- (hi << 16)
- + lo;
- }
- } else
- goto bad_resolved_reloc;
- break;
-
- case R_V850_LO16:
- /* See if this is actually the
- 2nd half of a pair. */
- if (p > relpp
- && (p[-1]->howto->type
- == R_V850_HI16_S)
- && (p[-1]->sym_ptr_ptr
- == p[0]->sym_ptr_ptr)
- && (p[-1]->addend == p[0]->addend))
- break; /* not an error */
- else
- goto bad_resolved_reloc;
-
- case R_V850_HI16:
- goto bad_resolved_reloc;
- default:
- goto good_32bit_resolved_reloc;
-#elif defined(TARGET_arm)
- case R_ARM_ABS32:
- relocation_needed = 1;
- break;
- case R_ARM_REL32:
- case R_ARM_THM_PC11:
- case R_ARM_THM_PC22:
- relocation_needed = 0;
- break;
- default:
- goto bad_resolved_reloc;
-#elif defined(TARGET_m68k)
- case R_68K_32:
- goto good_32bit_resolved_reloc;
- case R_68K_PC32:
- case R_68K_PC16:
- /* The linker has already resolved
- PC relocs for us. In PIC links,
- the symbol must be in the data
- segment. */
- case R_68K_NONE:
- continue;
- default:
- goto bad_resolved_reloc;
-#else
- default:
- /* The default is to assume that the
- relocation is relative and has
- already been fixed up by the
- linker (perhaps we ought to make
- give an error by default, and
- require `safe' relocations to be
- enumberated explicitly?). */
- goto good_32bit_resolved_reloc;
-#endif
- good_32bit_resolved_reloc:
- if (bfd_big_endian (abs_bfd))
- sym_addr =
- (r_mem[0] << 24)
- + (r_mem[1] << 16)
- + (r_mem[2] << 8)
- + r_mem[3];
- else
- sym_addr =
- r_mem[0]
- + (r_mem[1] << 8)
- + (r_mem[2] << 16)
- + (r_mem[3] << 24);
- relocation_needed = 1;
- break;
-
- bad_resolved_reloc:
- printf("ERROR: reloc type %s unsupported in this context\n",
- q->howto->name);
- bad_relocs++;
- break;
- }
- } else {
- /* Calculate the sym address ourselves. */
- sym_reloc_size = bfd_get_reloc_size(q->howto);
-
-#if !defined(TARGET_h8300) && !defined(TARGET_e1) && !defined(TARGET_bfin) && !defined(TARGET_m68k)
- if (sym_reloc_size != 4) {
- printf("ERROR: bad reloc type %d size=%d for symbol=%s\n",
- (*p)->howto->type, sym_reloc_size, sym_name);
- bad_relocs++;
- rc = -1;
- continue;
- }
-#endif
-
- switch ((*p)->howto->type) {
-
-#if defined(TARGET_m68k)
- case R_68K_32:
- relocation_needed = 1;
- sym_vma = bfd_section_vma(abs_bfd, sym_section);
- sym_addr += sym_vma + q->addend;
- break;
- case R_68K_PC16:
- case R_68K_PC32:
- sym_vma = 0;
- sym_addr += sym_vma + q->addend;
- sym_addr -= q->address;
- break;
-#endif
-
-#if defined(TARGET_arm)
- case R_ARM_ABS32:
- relocation_needed = 1;
- if (verbose)
- fprintf(stderr,
- "%s vma=0x%x, value=0x%x, address=0x%x "
- "sym_addr=0x%x rs=0x%x, opcode=0x%x\n",
- "ABS32",
- sym_vma, (*(q->sym_ptr_ptr))->value,
- q->address, sym_addr,
- (*p)->howto->rightshift,
- *(unsigned long *)r_mem);
- sym_vma = bfd_section_vma(abs_bfd, sym_section);
- sym_addr += sym_vma + q->addend;
- break;
- case R_ARM_GOT32:
- case R_ARM_GOTPC:
- /* Should be fine as is */
- break;
- case R_ARM_PLT32:
- if (verbose)
- fprintf(stderr,
- "%s vma=0x%x, value=0x%x, address=0x%x "
- "sym_addr=0x%x rs=0x%x, opcode=0x%x\n",
- "PLT32",
- sym_vma, (*(q->sym_ptr_ptr))->value,
- q->address, sym_addr,
- (*p)->howto->rightshift,
- *(unsigned long *)r_mem);
- case R_ARM_PC24:
- sym_vma = 0;
- sym_addr = (sym_addr-q->address)>>(*p)->howto->rightshift;
- break;
-#endif
-
-#ifdef TARGET_v850
- case R_V850_32:
- relocation_needed = 1;
- sym_vma = bfd_section_vma(abs_bfd, sym_section);
- sym_addr += sym_vma + q->addend;
- break;
-#if defined(R_V850_ZDA_16_16_OFFSET) || defined(R_V850_ZDA_16_16_SPLIT_OFFSET)
-#ifdef R_V850_ZDA_16_16_OFFSET
- case R_V850_ZDA_16_16_OFFSET:
-#endif
-#ifdef R_V850_ZDA_16_16_SPLIT_OFFSET
- case R_V850_ZDA_16_16_SPLIT_OFFSET:
-#endif
- /* Can't support zero-relocations. */
- printf ("ERROR: %s+0x%x: zero relocations not supported\n",
- sym_name, q->addend);
- continue;
-#endif /* R_V850_ZDA_16_16_OFFSET || R_V850_ZDA_16_16_SPLIT_OFFSET */
-#endif /* TARGET_v850 */
-
-#ifdef TARGET_h8300
- case R_H8_DIR24R8:
- if (sym_reloc_size != 4) {
- printf("R_H8_DIR24R8 size %d\n", sym_reloc_size);
- bad_relocs++;
- continue;
- }
- relocation_needed = 1;
- sym_addr = (*(q->sym_ptr_ptr))->value;
- q->address -= 1;
- r_mem -= 1; /* tracks q->address */
- sym_vma = bfd_section_vma(abs_bfd, sym_section);
- sym_addr += sym_vma + q->addend;
- sym_addr |= (*(unsigned char *)r_mem<<24);
- break;
- case R_H8_DIR24A8:
- if (sym_reloc_size != 4) {
- printf("R_H8_DIR24A8 size %d\n", sym_reloc_size);
- bad_relocs++;
- continue;
- }
- /* Absolute symbol done not relocation */
- relocation_needed = !bfd_is_abs_section(sym_section);
- sym_addr = (*(q->sym_ptr_ptr))->value;
- sym_vma = bfd_section_vma(abs_bfd, sym_section);
- sym_addr += sym_vma + q->addend;
- break;
- case R_H8_DIR32:
- case R_H8_DIR32A16: /* currently 32, could be made 16 */
- if (sym_reloc_size != 4) {
- printf("R_H8_DIR32 size %d\n", sym_reloc_size);
- bad_relocs++;
- continue;
- }
- relocation_needed = 1;
- sym_addr = (*(q->sym_ptr_ptr))->value;
- sym_vma = bfd_section_vma(abs_bfd, sym_section);
- sym_addr += sym_vma + q->addend;
- break;
- case R_H8_PCREL16:
- sym_vma = 0;
- sym_addr = (*(q->sym_ptr_ptr))->value;
- sym_addr += sym_vma + q->addend;
- sym_addr -= (q->address + 2);
- if (bfd_big_endian(abs_bfd))
- *(unsigned short *)r_mem =
- bfd_big_endian(abs_bfd) ? htons(sym_addr) : sym_addr;
- continue;
- case R_H8_PCREL8:
- sym_vma = 0;
- sym_addr = (*(q->sym_ptr_ptr))->value;
- sym_addr += sym_vma + q->addend;
- sym_addr -= (q->address + 1);
- *(unsigned char *)r_mem = sym_addr;
- continue;
-#endif
-
-#ifdef TARGET_microblaze
- case R_MICROBLAZE_64:
- /* The symbol is split over two consecutive instructions.
- Flag this to the flat loader by setting the high bit of
- the relocation symbol. */
- {
- unsigned char *p = r_mem;
- unsigned long offset;
- pflags=0x80000000;
-
- /* work out the relocation */
- sym_vma = bfd_section_vma(abs_bfd, sym_section);
- /* grab any offset from the text */
- offset = (p[2]<<24) + (p[3] << 16) + (p[6] << 8) + (p[7]);
- /* Update the address */
- sym_addr += offset + sym_vma + q->addend;
- /* Write relocated pointer back */
- p[2] = (sym_addr >> 24) & 0xff;
- p[3] = (sym_addr >> 16) & 0xff;
- p[6] = (sym_addr >> 8) & 0xff;
- p[7] = sym_addr & 0xff;
-
- /* create a new reloc entry */
- flat_relocs = realloc(flat_relocs,
- (flat_reloc_count + 1) * sizeof(uint32_t));
- flat_relocs[flat_reloc_count] = pflags | (section_vma + q->address);
- flat_reloc_count++;
- relocation_needed = 0;
- pflags = 0;
- sprintf(&addstr[0], "+0x%x", sym_addr - (*(q->sym_ptr_ptr))->value -
- bfd_section_vma(abs_bfd, sym_section));
- if (verbose)
- printf(" RELOC[%d]: offset=0x%x symbol=%s%s "
- "section=%s size=%d "
- "fixup=0x%x (reloc=0x%x)\n", flat_reloc_count,
- q->address, sym_name, addstr,
- section_name, sym_reloc_size,
- sym_addr, section_vma + q->address);
- if (verbose)
- printf("reloc[%d] = 0x%x\n", flat_reloc_count,
- section_vma + q->address);
-
- continue;
- }
- case R_MICROBLAZE_32:
- {
- unsigned char *p = r_mem;
- unsigned long offset;
-
- /* grab any offset from the text */
- offset = (p[0]<<24) + (p[1] << 16) + (p[2] << 8) + (p[3]);
- sym_vma = bfd_section_vma(abs_bfd, sym_section);
- /* This is a horrible kludge. For some
- reason, *sometimes* the offset is in
- both addend and the code. Detect
- it, and cancel the effect. Otherwise
- the offset gets added twice - ouch.
- There should be a better test
- for this condition, based on the
- BFD data structures */
- if(offset==q->addend)
- offset=0;
-
- sym_addr += offset + sym_vma + q->addend;
- relocation_needed = 1;
- break;
- }
- case R_MICROBLAZE_64_PCREL:
- sym_vma = 0;
- //sym_addr = (*(q->sym_ptr_ptr))->value;
- sym_addr += sym_vma + q->addend;
- sym_addr -= (q->address + 4);
- sym_addr = htonl(sym_addr);
- /* insert 16 MSB */
- * ((unsigned short *) (r_mem+2)) |= (sym_addr) & 0xFFFF;
- /* then 16 LSB */
- * ((unsigned short *) (r_mem+6)) |= (sym_addr >> 16) & 0xFFFF;
- /* We've done all the work, so continue
- to next reloc instead of break */
- continue;
-
-#endif /* TARGET_microblaze */
-
-#ifdef TARGET_nios2
-#define htoniosl(x) (x)
-#define niostohl(x) (x)
- case R_NIOS2_BFD_RELOC_32:
- relocation_needed = 1;
- pflags = (FLAT_NIOS2_R_32 << 28);
- sym_vma = bfd_section_vma(abs_bfd, sym_section);
- sym_addr += sym_vma + q->addend;
- /* modify target, in target order */
- *(unsigned long *)r_mem = htoniosl(sym_addr);
- break;
- case R_NIOS2_CALL26:
- {
- unsigned long exist_val;
- relocation_needed = 1;
- pflags = (FLAT_NIOS2_R_CALL26 << 28);
- sym_vma = bfd_section_vma(abs_bfd, sym_section);
- sym_addr += sym_vma + q->addend;
-
- /* modify target, in target order */
- // exist_val = niostohl(*(unsigned long *)r_mem);
- exist_val = ((sym_addr >> 2) << 6);
- *(unsigned long *)r_mem = htoniosl(exist_val);
- break;
- }
- case R_NIOS2_HIADJ16:
- case R_NIOS2_HI16:
- {
- unsigned long exist_val;
- int r2_type;
- /* handle the adjacent HI/LO pairs */
- if (relcount == 0)
- r2_type = R_NIOS2_NONE;
- else
- r2_type = p[1]->howto->type;
- if ((r2_type == R_NIOS2_LO16)
- && (p[0]->sym_ptr_ptr == p[1]->sym_ptr_ptr)
- && (p[0]->addend == p[1]->addend))
- {
- unsigned char * r2_mem = sectionp + p[1]->address;
- if (p[1]->address - q->address!=4)
- printf("Err: HI/LO not adjacent %d\n", p[1]->address - q->address);
- relocation_needed = 1;
- pflags = (q->howto->type == R_NIOS2_HIADJ16)
- ? FLAT_NIOS2_R_HIADJ_LO : FLAT_NIOS2_R_HI_LO;
- pflags <<= 28;
-
- sym_vma = bfd_section_vma(abs_bfd, sym_section);
- sym_addr += sym_vma + q->addend;
-
- /* modify high 16 bits, in target order */
- exist_val = niostohl(*(unsigned long *)r_mem);
- exist_val = ((exist_val >> 22) << 22) | (exist_val & 0x3f);
- if (q->howto->type == R_NIOS2_HIADJ16)
- exist_val |= ((((sym_addr >> 16) + ((sym_addr >> 15) & 1)) & 0xFFFF) << 6);
- else
- exist_val |= (((sym_addr >> 16) & 0xFFFF) << 6);
- *(unsigned long *)r_mem = htoniosl(exist_val);
-
- /* modify low 16 bits, in target order */
- exist_val = niostohl(*(unsigned long *)r2_mem);
- exist_val = ((exist_val >> 22) << 22) | (exist_val & 0x3f);
- exist_val |= ((sym_addr & 0xFFFF) << 6);
- *(unsigned long *)r2_mem = htoniosl(exist_val);
-
- } else
- goto NIOS2_RELOC_ERR;
- }
- break;
-
- case R_NIOS2_GPREL:
- {
- unsigned long exist_val, temp;
- //long gp = get_symbol_offset("_gp", sym_section, symbols, number_of_symbols);
- long gp = get_gp_value(symbols, number_of_symbols);
- if (gp == -1) {
- printf("Err: unresolved symbol _gp when relocating %s\n", sym_name);
- goto NIOS2_RELOC_ERR;
- }
- /* _gp holds a absolute value, otherwise the ld cannot generate correct code */
- sym_vma = bfd_section_vma(abs_bfd, sym_section);
- //printf("sym=%x, %d, _gp=%x, %d\n", sym_addr+sym_vma, sym_addr+sym_vma, gp, gp);
- sym_addr += sym_vma + q->addend;
- sym_addr -= gp;
- //printf("sym - _gp=%x, %d\n", sym_addr, sym_addr);
- /* modify the target, in target order (little_endian) */
- exist_val = niostohl(*(unsigned long *)r_mem);
- temp = ((exist_val >> 6) & 0x3ff0000) | (sym_addr & 0xffff);
- temp <<= 6;
- temp |= (exist_val & 0x3f);
- *(unsigned long *)r_mem = htoniosl(temp);
- if (verbose)
- printf("omit: offset=0x%x symbol=%s%s "
- "section=%s size=%d "
- "fixup=0x%x (reloc=0x%x) GPREL\n",
- q->address, sym_name, addstr,
- section_name, sym_reloc_size,
- sym_addr, section_vma + q->address);
- continue;
- }
- case R_NIOS2_PCREL16:
- {
- unsigned long exist_val;
- sym_vma = 0;
- sym_addr += sym_vma + q->addend;
- sym_addr -= (q->address + 4);
- /* modify the target, in target order (little_endian) */
- exist_val = niostohl(*(unsigned long *)r_mem);
- exist_val = ((exist_val >> 22) << 22) | (exist_val & 0x3f);
- exist_val |= ((sym_addr & 0xFFFF) << 6);
- *(unsigned long *)r_mem = htoniosl(exist_val);
- if (verbose)
- printf("omit: offset=0x%x symbol=%s%s "
- "section=%s size=%d "
- "fixup=0x%x (reloc=0x%x) PCREL\n",
- q->address, sym_name, addstr,
- section_name, sym_reloc_size,
- sym_addr, section_vma + q->address);
- continue;
- }
-
- case R_NIOS2_LO16:
- /* check if this is actually the 2nd half of a pair */
- if ((p > relpp)
- && ((p[-1]->howto->type == R_NIOS2_HIADJ16)
- || (p[-1]->howto->type == R_NIOS2_HI16))
- && (p[-1]->sym_ptr_ptr == p[0]->sym_ptr_ptr)
- && (p[-1]->addend == p[0]->addend)) {
- if (verbose)
- printf("omit: offset=0x%x symbol=%s%s "
- "section=%s size=%d LO16\n",
- q->address, sym_name, addstr,
- section_name, sym_reloc_size);
- continue;
- }
-
- /* error, fall through */
-
- case R_NIOS2_S16:
- case R_NIOS2_U16:
- case R_NIOS2_CACHE_OPX:
- case R_NIOS2_IMM5:
- case R_NIOS2_IMM6:
- case R_NIOS2_IMM8:
- case R_NIOS2_BFD_RELOC_16:
- case R_NIOS2_BFD_RELOC_8:
- case R_NIOS2_GNU_VTINHERIT:
- case R_NIOS2_GNU_VTENTRY:
- case R_NIOS2_UJMP:
- case R_NIOS2_CJMP:
- case R_NIOS2_CALLR:
-NIOS2_RELOC_ERR:
- printf("Err: unexpected reloc type %s(%d)\n", q->howto->name, q->howto->type);
- bad_relocs++;
- continue;
-#endif /* TARGET_nios2 */
-
-#ifdef TARGET_sparc
- case R_SPARC_32:
- case R_SPARC_UA32:
- relocation_needed = 1;
- sym_vma = bfd_section_vma(abs_bfd, sym_section);
- sym_addr += sym_vma + q->addend;
- break;
- case R_SPARC_PC22:
- sym_vma = 0;
- sym_addr += sym_vma + q->addend;
- sym_addr -= q->address;
- break;
- case R_SPARC_WDISP30:
- sym_addr = (((*(q->sym_ptr_ptr))->value-
- q->address) >> 2) & 0x3fffffff;
- sym_addr |= (
- ntohl(*(unsigned long *)r_mem)
- & 0xc0000000
- );
- break;
- case R_SPARC_HI22:
- relocation_needed = 1;
- pflags = 0x80000000;
- sym_vma = bfd_section_vma(abs_bfd, sym_section);
- sym_addr += sym_vma + q->addend;
- sym_addr |= (
- htonl(*(unsigned long *)r_mem)
- & 0xffc00000
- );
- break;
- case R_SPARC_LO10:
- relocation_needed = 1;
- pflags = 0x40000000;
- sym_vma = bfd_section_vma(abs_bfd, sym_section);
- sym_addr += sym_vma + q->addend;
- sym_addr &= 0x000003ff;
- sym_addr |= (
- htonl(*(unsigned long *)r_mem)
- & 0xfffffc00
- );
- break;
-#endif /* TARGET_sparc */
-
-#ifdef TARGET_bfin
- case R_pcrel12_jump:
- case R_pcrel12_jump_s:
- case R_pcrel24:
- case R_pcrel24_jump_l:
- case R_pcrel24_jump_x:
- case R_pcrel24_call_x:
- case R_pcrel10:
- case R_pcrel11:
- case R_pcrel5m2:
- sym_addr += q->addend;// get the symbol addr
- sym_vma = bfd_section_vma(abs_bfd, sym_section);
- sym_addr -= q->address; // make it PC relative
- // implicitly assumes code section and symbol section are same
- break;
- case R_got:
- /* Ignore these. */
- break;
-
- case R_rimm16:
- sym_addr += q->addend;
- if(weak_und_symbol(sym_section->name, (*(q->sym_ptr_ptr))))
- continue;
- if(0xFFFF0000 & sym_addr){
- fprintf (stderr, "Relocation overflow for rN = %s\n",sym_name);
- bad_relocs++;
- }
- flat_relocs = (uint32_t *)
- (realloc (flat_relocs, (flat_reloc_count + 1) * sizeof (uint32_t)));
- if (bfin_set_reloc (flat_relocs + flat_reloc_count,
- sym_section->name, sym_name,
- (*(q->sym_ptr_ptr)),
- 0, FLAT_RELOC_PART_LO,
- section_vma + q->address))
- bad_relocs++;
- flat_reloc_count++;
- break;
-
- case R_luimm16:
- case R_huimm16:
- {
- unsigned int sp;
- unsigned int reloc_count_incr;
- unsigned int hi_lo;
-
- if (q->howto->type == R_luimm16)
- hi_lo = FLAT_RELOC_PART_LO;
- else
- hi_lo = FLAT_RELOC_PART_HI;
-
- sym_addr += q->addend;
-
- flat_relocs = (uint32_t *)
- (realloc (flat_relocs, (flat_reloc_count + 2) * sizeof (uint32_t)));
- reloc_count_incr = 1;
- if (weak_und_symbol (sym_section->name, (*(q->sym_ptr_ptr))))
- continue;
- if (0xFFFF0000 & sym_addr) {
- /* value is > 16 bits - use an extra field */
- /* see if we have already output that symbol */
- /* reloc may be addend from symbol and */
- /* we can only store 16 bit offsets */
- sp = 1;
- if ((*(q->sym_ptr_ptr))->udata.i == 0
- || flat_relocs[(*(q->sym_ptr_ptr))->udata.i] != sym_addr
- || ((*(q->sym_ptr_ptr))->udata.i & 0xFFFF0000))
- {
- reloc_count_incr = 2;
- flat_relocs[flat_reloc_count + 1] = sym_addr;
- (*(q->sym_ptr_ptr))->udata.i = flat_reloc_count + 1;
- sym_addr = 0; // indication to loader to read next
- } else{
- sym_addr = (*(q->sym_ptr_ptr))->udata.i;
- }
- } else {
- sp = 0;
- }
-
- if (bfin_set_reloc (flat_relocs + flat_reloc_count,
- sym_section->name, sym_name,
- (*(q->sym_ptr_ptr)),
- sp, hi_lo,
- section_vma + q->address))
- bad_relocs++;
- flat_reloc_count += reloc_count_incr;
- break;
- }
- case R_byte4_data:
- sym_addr += q->addend;
-
- if (weak_und_symbol (sym_section->name, *q->sym_ptr_ptr))
- continue;
-
- flat_relocs = (uint32_t *)
- (realloc (flat_relocs, (flat_reloc_count + 1) * sizeof (uint32_t)));
- if (bfin_set_reloc (flat_relocs + flat_reloc_count,
- sym_section->name, sym_name,
- (*(q->sym_ptr_ptr)),
- 2, FLAT_RELOC_PART_LO,
- section_vma + q->address))
- bad_relocs++;
-
- flat_reloc_count++;
- break;
-
-#endif //TARGET_bfin
-
-#ifdef TARGET_sh
- case R_SH_DIR32:
- relocation_needed = 1;
- sym_vma = bfd_section_vma(abs_bfd, sym_section);
- sym_addr += sym_vma + q->addend;
- break;
- case R_SH_REL32:
- sym_vma = 0;
- sym_addr += sym_vma + q->addend;
- sym_addr -= q->address;
- break;
-#endif /* TARGET_sh */
-
-#ifdef TARGET_e1
-#define htoe1l(x) htonl(x)
-
-#if 0
-#define DEBUG_E1
-#endif
-
-#ifdef DEBUG_E1
-#define DBG_E1 printf
-#else
-#define DBG_E1(x, ... )
-#endif
-
-#define _32BITS_RELOC 0x00000000
-#define _30BITS_RELOC 0x80000000
-#define _28BITS_RELOC 0x40000000
- {
- char *p;
- unsigned long sec_vma, exist_val, S;
- case R_E1_CONST31:
- relocation_needed = 1;
- DBG_E1("Handling Reloc <CONST31>\n");
- sec_vma = bfd_section_vma(abs_bfd, sym_section);
- DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x], q->address : [0x%x]\n",
- sec_vma, sym_addr, q->address);
- sym_addr = sec_vma + sym_addr;
- exist_val = *(unsigned long*)((unsigned long)sectionp + q->address + 2);
- DBG_E1("Orig:exist_val : [0x%08x]\n", exist_val);
- exist_val = htoe1l(exist_val);
- DBG_E1("HtoBE:exist_val : [0x%08x]\n", exist_val);
- sym_addr += exist_val;
- pflags = _30BITS_RELOC;
- break;
- case R_E1_CONST31_PCREL:
- relocation_needed = 0;
- DBG_E1("Handling Reloc <CONST31_PCREL>\n");
- DBG_E1("DONT RELOCATE AT LOADING\n");
- sec_vma = bfd_section_vma(abs_bfd, sym_section);
- DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x], q->address : [0x%x]\n",
- sec_vma, sym_addr, q->address);
- sym_addr = sec_vma + sym_addr;
- DBG_E1("sym_addr = sec_vma + sym_addr : [0x%x]\n", sym_addr );
-
- DBG_E1("q->address : 0x%x, section_vma : 0x%x\n", q->address,
- section_vma );
- q->address = q->address + section_vma;
- DBG_E1("q->address += section_vma : 0x%x\n", q->address );
-
- if( (sym_addr = (sym_addr - q->address - 6)) < 0 )
- DBG_E1("NEGATIVE OFFSET in PC Relative instruction\n");
- DBG_E1( "sym_addr := sym_addr - q->address - "
- "sizeof(CONST31_PCREL): [0x%x]\n",
- sym_addr );
- exist_val = *(unsigned long*)((unsigned long)sectionp + q->address + 2);
- DBG_E1("Orig:exist_val : [0x%08x]\n", exist_val);
- exist_val = htoe1l(exist_val);
- DBG_E1("HtoBE:exist_val : [0x%08x]\n", exist_val);
- sym_addr |= exist_val;
- DBG_E1("sym_addr |= exist_val) : [0x%x]\n", sym_addr );
- break;
- case R_E1_DIS29W_PCREL:
- relocation_needed = 0;
- DBG_E1("Handling Reloc <DIS29W_PCREL>\n");
- DBG_E1("DONT RELOCATE AT LOADING\n");
- sec_vma = bfd_section_vma(abs_bfd, sym_section);
- DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x], q->address : [0x%x]\n",
- sec_vma, sym_addr, q->address);
- sym_addr = sec_vma + sym_addr;
- DBG_E1("sym_addr = sec_vma + sym_addr : [0x%x]\n", sym_addr );
-
- DBG_E1("q->address : 0x%x, section_vma : 0x%x\n", q->address,
- section_vma );
- q->address = q->address + section_vma;
- DBG_E1("q->address += section_vma : 0x%x\n", q->address );
-
- if( (sym_addr = (sym_addr - q->address - 6)) < 0 )
- DBG_E1("NEGATIVE OFFSET in PC Relative instruction\n");
- DBG_E1( "sym_addr := sym_addr - q->address - "
- "sizeof(CONST31_PCREL): [0x%x]\n",
- sym_addr );
- DBG_E1("sectionp:[0x%x], q->address:[0x%x]\n", sectionp, q->address );
- exist_val = *(unsigned long*)((unsigned long)sectionp + q->address + 2);
- DBG_E1("Original:exist_val : [0x%08x]\n",exist_val);
- exist_val = htoe1l(exist_val);
- DBG_E1("HtoBE:exist_val : [0x%08x]\n",exist_val);
- sym_addr += exist_val;
- break;
- case R_E1_DIS29W:
- DBG_E1("Handling Reloc <DIS29W>\n");
- goto DIS29_RELOCATION;
- case R_E1_DIS29H:
- DBG_E1("Handling Reloc <DIS29H>\n");
- goto DIS29_RELOCATION;
- case R_E1_DIS29B:
- DBG_E1("Handling Reloc <DIS29B>\n");
-DIS29_RELOCATION:
- relocation_needed = 1;
- sec_vma = bfd_section_vma(abs_bfd, sym_section);
- DBG_E1("sec_vma : [0x%x], sym_addr : [0x%08x]\n",
- sec_vma, sym_addr);
- sym_addr = sec_vma + sym_addr;
- DBG_E1("sym_addr = sec_vma + sym_addr : [0x%08x]\n", sym_addr);
- exist_val = *(unsigned long*)((unsigned long)sectionp + q->address + 2);
- DBG_E1("Orig:exist_val : [0x%08x]\n", exist_val);
- exist_val = htoe1l(exist_val);
- DBG_E1("HtoBE:exist_val : [0x%08x]\n", exist_val);
- sym_addr += exist_val;
- DBG_E1("sym_addr += exist_val : [0x%08x]\n", sym_addr);
- pflags = _28BITS_RELOC;
- break;
- case R_E1_IMM32_PCREL:
- relocation_needed = 0;
- DBG_E1("Handling Reloc <IMM32_PCREL>\n");
- DBG_E1("DONT RELOCATE AT LOADING\n");
- sec_vma = bfd_section_vma(abs_bfd, sym_section);
- DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x]\n",
- sec_vma, sym_addr);
- sym_addr = sec_vma + sym_addr;
-
- DBG_E1("sym_addr = sec_vma + sym_addr : [0x%x]\n", sym_addr );
- DBG_E1("q->address : 0x%x, section_vma : 0x%x\n", q->address,
- section_vma );
- q->address = q->address + section_vma;
- DBG_E1("q->address += section_vma : 0x%x\n", q->address );
-
- if( (sym_addr = (sym_addr - q->address - 6 )) < 0 )
- DBG_E1("NEGATIVE OFFSET in PC Relative instruction\n");
- DBG_E1( "sym_addr := sym_addr - q->address - "
- "sizeof(CONST31_PCREL): [0x%x]\n",
- sym_addr );
- DBG_E1("sectionp:[0x%x], q->address:[0x%x]\n", sectionp, q->address );
- exist_val = *(unsigned long*)((unsigned long)sectionp + q->address + 2);
- DBG_E1("Original:exist_val : [0x%08x]\n",exist_val);
- exist_val = htoe1l(exist_val);
- DBG_E1("HtoBE:exist_val : [0x%08x]\n",exist_val);
- sym_addr += exist_val;
- break;
- case R_E1_IMM32:
- relocation_needed = 1;
- DBG_E1("Handling Reloc <IMM32>\n");
- sec_vma = bfd_section_vma(abs_bfd, sym_section);
- DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x]\n",
- sec_vma, sym_addr);
- sym_addr = sec_vma + sym_addr;
- DBG_E1("sym_addr = sec_vma + sym_addr : [0x%x]\n", sym_addr );
- DBG_E1("sectionp:[0x%x], q->address:[0x%x]\n", sectionp, q->address );
- exist_val = *(unsigned long*)((unsigned long)sectionp + q->address + 2);
- DBG_E1("Original:exist_val : [0x%08x]\n",exist_val);
- exist_val = htoe1l(exist_val);
- DBG_E1("HtoBE:exist_val : [0x%08x]\n",exist_val);
- sym_addr += exist_val;
- pflags = _32BITS_RELOC;
- break;
- case R_E1_WORD:
- relocation_needed = 1;
- DBG_E1("Handling Reloc <WORD>\n");
- sec_vma = bfd_section_vma(abs_bfd, sym_section);
- DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x]\n",
- sec_vma, sym_addr);
- sym_addr = sec_vma + sym_addr;
- DBG_E1("sym_addr = sec_vma + sym_addr : [0x%x]\n", sym_addr );
- exist_val = *(unsigned long*)((unsigned long)sectionp + q->address );
- DBG_E1("Orig:exist_val : [0x%08x]\n", exist_val);
- exist_val = htoe1l(exist_val);
- DBG_E1("HtoBE:exist_val : [0x%08x]\n", exist_val);
- sym_addr += exist_val;
- DBG_E1("sym_addr += exist_val : [0x%08x]\n", sym_addr);
- pflags = _32BITS_RELOC;
- break;
- }
-#undef _32BITS_RELOC
-#undef _30BITS_RELOC
-#undef _28BITS_RELOC
-#endif
- default:
- /* missing support for other types of relocs */
- printf("ERROR: bad reloc type %d\n", (*p)->howto->type);
- bad_relocs++;
- continue;
- }
- }
-
- sprintf(&addstr[0], "+0x%x", sym_addr - (*(q->sym_ptr_ptr))->value -
- bfd_section_vma(abs_bfd, sym_section));
-
-
- /*
- * for full elf relocation we have to write back the
- * start_code relative value to use.
- */
- if (!pic_with_got) {
-#if defined(TARGET_arm)
- union {
- unsigned char c[4];
- unsigned long l;
- } tmp;
- long hl;
- int i0, i1, i2, i3;
-
- /*
- * horrible nasty hack to support different endianess
- */
- if (!bfd_big_endian(abs_bfd)) {
- i0 = 0;
- i1 = 1;
- i2 = 2;
- i3 = 3;
- } else {
- i0 = 3;
- i1 = 2;
- i2 = 1;
- i3 = 0;
- }
-
- tmp.l = *(unsigned long *)r_mem;
- hl = tmp.c[i0] | (tmp.c[i1] << 8) | (tmp.c[i2] << 16);
- if (use_resolved ||
- (((*p)->howto->type != R_ARM_PC24) &&
- ((*p)->howto->type != R_ARM_PLT32)))
- hl |= (tmp.c[i3] << 24);
- else if (tmp.c[i2] & 0x80)
- hl |= 0xff000000; /* sign extend */
- if (!use_resolved)
- hl += sym_addr;
- tmp.c[i0] = hl & 0xff;
- tmp.c[i1] = (hl >> 8) & 0xff;
- tmp.c[i2] = (hl >> 16) & 0xff;
- if (use_resolved ||
- (((*p)->howto->type != R_ARM_PC24) &&
- ((*p)->howto->type != R_ARM_PLT32)))
- tmp.c[i3] = (hl >> 24) & 0xff;
- if ((*p)->howto->type == R_ARM_ABS32)
- *(unsigned long *)r_mem = htonl(hl);
- else
- *(unsigned long *)r_mem = tmp.l;
-
-#elif defined(TARGET_bfin)
- if ((*p)->howto->type == R_pcrel24
- || (*p)->howto->type == R_pcrel24_jump_l
- || (*p)->howto->type == R_pcrel24_jump_x
- || (*p)->howto->type == R_pcrel24_call_x)
- {
- sym_addr += 2*-1*PCREL24_MAGIC_OFFSET;
- *((unsigned short *)(sectionp + q->address) + 1 + PCREL24_MAGIC_OFFSET)
- = (sym_addr >> 1) & 0xffff;
- *((unsigned short *)(sectionp + q->address) + PCREL24_MAGIC_OFFSET)
- = (0xff00 & *((unsigned short *) (sectionp + q->address) + PCREL24_MAGIC_OFFSET)
- | ((sym_addr >> 17) & 0xff));
- } else if ((*p)->howto->type == R_byte4_data) {
- *((uint32_t *)(sectionp + q->address)) = sym_addr;
- } else if ((*p)->howto->type == R_pcrel12_jump
- || (*p)->howto->type == R_pcrel12_jump_s) {
- *((unsigned short *)(sectionp + q->address))
- = (0xf000 & *((unsigned short *)(sectionp + q->address))
- | ((sym_addr >> 1) & 0xfff));
- } else if ((*p)->howto->type == R_pcrel10) {
- *((unsigned short *)(sectionp + q->address))
- = (~0x3ff & *((unsigned short *)(sectionp + q->address))
- | ((sym_addr >> 1) & 0x3ff));
- } else if ((*p)->howto->type == R_rimm16
- || (*p)->howto->type == R_huimm16
- || (*p)->howto->type == R_luimm16) {
- /* for l and h we set the lower 16 bits which is only when it will be used */
- *((unsigned short *) (sectionp + q->address)) = (unsigned short) sym_addr;
- } else if ((*p)->howto->type == R_pcrel5m2) {
- *((unsigned short *)(sectionp + q->address))
- = (0xfff0 & *((unsigned short *)(sectionp + q->address))
- | ((sym_addr >> 1) & 0xf));
- } else if ((*p)->howto->type == R_pcrel11){
- *((unsigned short *)(sectionp + q->address))
- = (0xfc00 & *((unsigned short *)(sectionp + q->address))
- | ((sym_addr >> 1) & 0x3ff));
- } else if (0xE0 <= (*p)->howto->type && 0xF3 >= (*p)->howto->type) {
- //arith relocs dont generate a real relocation
- } else {
- printf("Blackfin relocation fail for reloc type: 0x%x\n", (*p)->howto->type);
- }
-#elif defined(TARGET_e1)
-#define OPCODE_SIZE 2 /* Add 2 bytes, counting the opcode size*/
- switch ((*p)->howto->type) {
- case R_E1_CONST31:
- case R_E1_CONST31_PCREL:
- case R_E1_DIS29W_PCREL:
- case R_E1_DIS29W:
- case R_E1_DIS29H:
- case R_E1_DIS29B:
- case R_E1_IMM32_PCREL:
- case R_E1_IMM32:
- DBG_E1("In addr + 2:[0x%x] <- write [0x%x]\n",
- (sectionp + q->address + 2), sym_addr );
- *((unsigned long *) (sectionp + q->address + OPCODE_SIZE)) =
- htonl(sym_addr);
- break;
- case R_E1_WORD:
- DBG_E1("In addr : [0x%x] <- write [0x%x]\n",
- (sectionp + q->address), sym_addr );
- *((unsigned long *) (sectionp + q->address )) = htonl(sym_addr);
- break;
- default:
- printf("ERROR:Unhandled Relocation. Exiting...\n");
- exit(0);
- break;
- }
-#else /* ! TARGET_arm && ! TARGET_e1 */
-
- switch (q->howto->type) {
-#ifdef TARGET_v850
- case R_V850_HI16_S:
- case R_V850_HI16:
- case R_V850_LO16:
- /* Do nothing -- for cases we handle,
- the bits produced by the linker are
- what we want in the final flat file
- (and other cases are errors). Note
- that unlike most relocated values,
- it is stored in little-endian order,
- but this is necessary to avoid
- trashing the low-bit, and the float
- loaders knows about it. */
- break;
-#endif /* TARGET_V850 */
-
-#ifdef TARGET_nios2
- case R_NIOS2_BFD_RELOC_32:
- case R_NIOS2_CALL26:
- case R_NIOS2_HIADJ16:
- case R_NIOS2_HI16:
- /* do nothing */
- break;
-#endif /* TARGET_nios2 */
-
-#if defined(TARGET_m68k)
- case R_68K_PC16:
- if (sym_addr < -0x8000 || sym_addr > 0x7fff) {
- fprintf (stderr, "Relocation overflow for R_68K_PC16 relocation against %s\n", sym_name);
- bad_relocs++;
- } else {
- r_mem[0] = (sym_addr >> 8) & 0xff;
- r_mem[1] = sym_addr & 0xff;
- }
- break;
-#endif
-
- default:
- /* The alignment of the build host
- might be stricter than that of the
- target, so be careful. We store in
- network byte order. */
- r_mem[0] = (sym_addr >> 24) & 0xff;
- r_mem[1] = (sym_addr >> 16) & 0xff;
- r_mem[2] = (sym_addr >> 8) & 0xff;
- r_mem[3] = sym_addr & 0xff;
- }
-#endif /* !TARGET_arm */
- }
-
-#ifdef TARGET_bfin
- else {
- if ((*p)->howto->type == R_rimm16
- || (*p)->howto->type == R_huimm16
- || (*p)->howto->type == R_luimm16)
- {
- /* for l and h we set the lower 16 bits which is only when it will be used */
- *((unsigned short *) (sectionp + q->address)) = (unsigned short) sym_addr;
- } else if ((*p)->howto->type == R_byte4_data) {
- *((uint32_t *)(sectionp + q->address)) = sym_addr;
- }
- }
-#endif
- if (verbose)
- printf(" RELOC[%d]: offset=0x%x symbol=%s%s "
- "section=%s size=%d "
- "fixup=0x%x (reloc=0x%x)\n", flat_reloc_count,
- q->address, sym_name, addstr,
- section_name, sym_reloc_size,
- sym_addr, section_vma + q->address);
-
- /*
- * Create relocation entry (PC relative doesn't need this).
- */
- if (relocation_needed) {
-#ifndef TARGET_bfin
- flat_relocs = realloc(flat_relocs,
- (flat_reloc_count + 1) * sizeof(uint32_t));
-#ifndef TARGET_e1
- flat_relocs[flat_reloc_count] = pflags |
- (section_vma + q->address);
-
- if (verbose)
- printf("reloc[%d] = 0x%x\n", flat_reloc_count,
- section_vma + q->address);
-#else
- switch ((*p)->howto->type) {
- case R_E1_CONST31:
- case R_E1_CONST31_PCREL:
- case R_E1_DIS29W_PCREL:
- case R_E1_DIS29W:
- case R_E1_DIS29H:
- case R_E1_DIS29B:
- case R_E1_IMM32_PCREL:
- case R_E1_IMM32:
- flat_relocs[flat_reloc_count] = pflags |
- (section_vma + q->address + OPCODE_SIZE);
- if (verbose)
- printf("RELOCATION TABLE : reloc[%d] = [0x%x]\n", flat_reloc_count,
- flat_relocs[flat_reloc_count] );
- break;
- case R_E1_WORD:
- flat_relocs[flat_reloc_count] = pflags |
- (section_vma + q->address);
- if (verbose)
- printf("RELOCATION TABLE : reloc[%d] = [0x%x]\n", flat_reloc_count,
- flat_relocs[flat_reloc_count] );
- break;
- }
-#endif
- flat_reloc_count++;
-#endif
- relocation_needed = 0;
- pflags = 0;
- }
-
-#if 0
-printf("%s(%d): symbol name=%s address=0x%x section=%s -> RELOC=0x%x\n",
- __FILE__, __LINE__, sym_name, q->address, section_name,
- flat_relocs[flat_reloc_count]);
-#endif
- }
- }
- }
-
- if (bad_relocs) {
- printf("%d bad relocs\n", bad_relocs);
- exit(1);
- }
-
- if (rc < 0)
- return(0);
-
- *n_relocs = flat_reloc_count;
- return flat_relocs;
-}
-
-
-
-static char * program;
-
-static void usage(void)
-{
- fprintf(stderr, "Usage: %s [vrzd] [-p <abs-pic-file>] [-s stack-size] "
- "[-o <output-file>] <elf-file>\n\n"
- " -v : verbose operation\n"
- " -r : force load to RAM\n"
- " -k : enable kernel trace on load (for debug)\n"
- " -z : compress code/data/relocs\n"
- " -d : compress data/relocs\n"
- " -a : use existing symbol references\n"
- " instead of recalculating from\n"
- " relocation info\n"
- " -R reloc-file : read relocations from a separate file\n"
- " -p abs-pic-file : GOT/PIC processing with files\n"
- " -s stacksize : set application stack size\n"
- " -o output-file : output file name\n\n",
- program);
- fprintf(stderr, "Compiled for " ARCH " architecture\n\n");
- exit(2);
-}
-
-
-/* Write NUM zeroes to STREAM. */
-static void write_zeroes (unsigned long num, FILE *stream)
-{
- char zeroes[1024];
- if (num > 0) {
- /* It'd be nice if we could just use fseek, but that doesn't seem to
- work for stdio output files. */
- memset(zeroes, 0x00, 1024);
- while (num > sizeof(zeroes)) {
- fwrite(zeroes, sizeof(zeroes), 1, stream);
- num -= sizeof(zeroes);
- }
- if (num > 0)
- fwrite(zeroes, num, 1, stream);
- }
-}
-
-
-int main(int argc, char *argv[])
-{
- int fd;
- bfd *rel_bfd, *abs_bfd;
- asection *s;
- char *ofile=NULL, *pfile=NULL, *abs_file = NULL, *rel_file = NULL;
- char *fname = NULL;
- int opt;
- int i;
- int stack;
- char cmd[1024];
- FILE *gf = NULL;
-
- asymbol **symbol_table;
- long number_of_symbols;
-
- unsigned long data_len = 0;
- unsigned long bss_len = 0;
- unsigned long text_len = 0;
- unsigned long reloc_len;
-
- unsigned long data_vma = ~0;
- unsigned long bss_vma = ~0;
- unsigned long text_vma = ~0;
-
- unsigned long text_offs;
-
- void *text;
- void *data;
- uint32_t *reloc;
-
- struct flat_hdr hdr;
-
- int gf_is_pipe = 0;
-
- program = argv[0];
- progname = argv[0];
-
- if (argc < 2)
- usage();
-
- if (sizeof(hdr) != 64) {
- fprintf(stderr,
- "Potential flat header incompatibility detected\n"
- "header size should be 64 but is %d\n",
- sizeof(hdr));
- exit(64);
- }
-
-#ifndef TARGET_e1
- stack = 4096;
-#else /* We need plenty of stack for both of them (Aggregate and Register) */
- stack = 0x2020;
-#endif
-
- while ((opt = getopt(argc, argv, "avzdrkp:s:o:R:")) != -1) {
- switch (opt) {
- case 'v':
- verbose++;
- break;
- case 'r':
- load_to_ram++;
- break;
- case 'k':
- ktrace++;
- break;
- case 'z':
- compress = 1;
- break;
- case 'd':
- compress = 2;
- break;
- case 'p':
- pfile = optarg;
- break;
- case 'o':
- ofile = optarg;
- break;
- case 'a':
- use_resolved = 1;
- break;
- case 's':
- stack = atoi(optarg);
- break;
- case 'R':
- rel_file = optarg;
- break;
- default:
- fprintf(stderr, "%s Unknown option\n", argv[0]);
- usage();
- break;
- }
- }
-
- /*
- * if neither the -r or -p options was given, default to
- * a RAM load as that is the only option that makes sense.
- */
- if (!load_to_ram && !pfile)
- load_to_ram = 1;
-
- filename = fname = argv[argc-1];
-
- if (pfile) {
- pic_with_got = 1;
- abs_file = pfile;
- } else
- abs_file = fname;
-
- if (! rel_file)
- rel_file = fname;
-
- if (!(rel_bfd = bfd_openr(rel_file, 0))) {
- fprintf(stderr, "Can't open %s\n", rel_file);
- exit(1);
- }
-
- if (bfd_check_format (rel_bfd, bfd_object) == 0) {
- fprintf(stderr, "File is not an object file\n");
- exit(2);
- }
-
- if (abs_file == rel_file)
- abs_bfd = rel_bfd; /* one file does all */
- else {
- if (!(abs_bfd = bfd_openr(abs_file, 0))) {
- fprintf(stderr, "Can't open %s\n", abs_file);
- exit(1);
- }
-
- if (bfd_check_format (abs_bfd, bfd_object) == 0) {
- fprintf(stderr, "File is not an object file\n");
- exit(2);
- }
- }
-
- if (! (bfd_get_file_flags(rel_bfd) & HAS_RELOC)) {
- fprintf (stderr, "%s: Input file contains no relocation info\n", rel_file);
- exit (2);
- }
-
- if (use_resolved && !(bfd_get_file_flags(abs_bfd) & EXEC_P)) {
- /* `Absolute' file is not absolute, so neither are address
- contained therein. */
- fprintf (stderr,
- "%s: `-a' option specified with non-fully-resolved input file\n",
- bfd_get_filename (abs_bfd));
- exit (2);
- }
-
- symbol_table = get_symbols(abs_bfd, &number_of_symbols);
-
- /* Group output sections into text, data, and bss, and calc their sizes. */
- for (s = abs_bfd->sections; s != NULL; s = s->next) {
- unsigned long *vma, *len;
- bfd_size_type sec_size;
- bfd_vma sec_vma;
-
- if (s->flags & SEC_CODE) {
- vma = &text_vma;
- len = &text_len;
- } else if (s->flags & SEC_DATA) {
- vma = &data_vma;
- len = &data_len;
- } else if (s->flags & SEC_ALLOC) {
- vma = &bss_vma;
- len = &bss_len;
- } else
- continue;
-
- sec_size = bfd_section_size(abs_bfd, s);
- sec_vma = bfd_section_vma(abs_bfd, s);
-
- if (sec_vma < *vma) {
- if (*len > 0)
- *len += sec_vma - *vma;
- else
- *len = sec_size;
- *vma = sec_vma;
- } else if (sec_vma + sec_size > *vma + *len)
- *len = sec_vma + sec_size - *vma;
- }
-
- if (text_len == 0) {
- fprintf (stderr, "%s: no .text section", abs_file);
- exit (2);
- }
-
- text = malloc(text_len);
-
- if (verbose)
- printf("TEXT -> vma=0x%x len=0x%x\n", text_vma, text_len);
-
- /* Read in all text sections. */
- for (s = abs_bfd->sections; s != NULL; s = s->next)
- if (s->flags & SEC_CODE)
- if (!bfd_get_section_contents(abs_bfd, s,
- text + (s->vma - text_vma), 0,
- bfd_section_size(abs_bfd, s)))
- {
- fprintf(stderr, "read error section %s\n", s->name);
- exit(2);
- }
-
- if (data_len == 0) {
- fprintf (stderr, "%s: no .data section", abs_file);
- exit (2);
- }
- data = malloc(data_len);
-
- if (verbose)
- printf("DATA -> vma=0x%x len=0x%x\n", data_vma, data_len);
-
- if ((text_vma + text_len) != data_vma) {
- if ((text_vma + text_len) > data_vma) {
- printf("ERROR: text=0x%x overlaps data=0x%x ?\n", text_len, data_vma);
- exit(1);
- }
- if (verbose)
- printf("WARNING: data=0x%x does not directly follow text=0x%x\n",
- data_vma, text_len);
- text_len = data_vma - text_vma;
- }
-
- /* Read in all data sections. */
- for (s = abs_bfd->sections; s != NULL; s = s->next)
- if (s->flags & SEC_DATA)
- if (!bfd_get_section_contents(abs_bfd, s,
- data + (s->vma - data_vma), 0,
- bfd_section_size(abs_bfd, s)))
- {
- fprintf(stderr, "read error section %s\n", s->name);
- exit(2);
- }
-
- /* Put common symbols in bss. */
- bss_len += add_com_to_bss(symbol_table, number_of_symbols, bss_len);
-
- if (verbose)
- printf("BSS -> vma=0x%x len=0x%x\n", bss_vma, bss_len);
-
- if ((data_vma + data_len) != bss_vma) {
- if ((data_vma + data_len) > bss_vma) {
- printf("ERROR: text=0x%x + data=0x%x overlaps bss=0x%x ?\n", text_len,
- data_len, bss_vma);
- exit(1);
- }
- if (verbose)
- printf("WARNING: bss=0x%x does not directly follow text=0x%x + data=0x%x(0x%x)\n",
- bss_vma, text_len, data_len, text_len + data_len);
- data_len = bss_vma - data_vma;
- }
-
- reloc = output_relocs(abs_bfd, symbol_table, number_of_symbols, &reloc_len,
- text, text_len, text_vma, data, data_len, data_vma,
- rel_bfd);
-
- if (reloc == NULL)
- printf("No relocations in code!\n");
-
- text_offs = real_address_bits(text_vma);
-
- /* Fill in the binflt_flat header */
- memcpy(hdr.magic,"bFLT",4);
- hdr.rev = htonl(FLAT_VERSION);
- hdr.entry = htonl(sizeof(hdr) + bfd_get_start_address(abs_bfd));
- hdr.data_start = htonl(sizeof(hdr) + text_offs + text_len);
- hdr.data_end = htonl(sizeof(hdr) + text_offs + text_len +data_len);
- hdr.bss_end = htonl(sizeof(hdr) + text_offs + text_len +data_len+bss_len);
- hdr.stack_size = htonl(stack); /* FIXME */
- hdr.reloc_start = htonl(sizeof(hdr) + text_offs + text_len +data_len);
- hdr.reloc_count = htonl(reloc_len);
- hdr.flags = htonl(0
- | (load_to_ram ? FLAT_FLAG_RAM : 0)
- | (ktrace ? FLAT_FLAG_KTRACE : 0)
- | (pic_with_got ? FLAT_FLAG_GOTPIC : 0)
- | (compress ? (compress == 2 ? FLAT_FLAG_GZDATA : FLAT_FLAG_GZIP) : 0)
- );
- hdr.build_date = htonl((unsigned long)time(NULL));
- memset(hdr.filler, 0x00, sizeof(hdr.filler));
-
- for (i=0; i<reloc_len; i++) reloc[i] = htonl(reloc[i]);
-
- if (verbose) {
- printf("SIZE: .text=0x%04x, .data=0x%04x, .bss=0x%04x",
- text_len, data_len, bss_len);
- if (reloc)
- printf(", relocs=0x%04x", reloc_len);
- printf("\n");
- }
-
- if (!ofile) {
- ofile = malloc(strlen(fname) + 5 + 1); /* 5 to add suffix */
- strcpy(ofile, fname);
- strcat(ofile, ".bflt");
- }
-
- if ((fd = open (ofile, O_WRONLY|O_BINARY|O_CREAT|O_TRUNC, 0744)) < 0) {
- fprintf (stderr, "Can't open output file %s\n", ofile);
- exit(4);
- }
-
- write(fd, &hdr, sizeof(hdr));
- close(fd);
-
- /*
- * get the compression command ready
- */
- sprintf(cmd, "gzip -f -9 >> %s", ofile);
-
-#define START_COMPRESSOR do { \
- if (gf) \
- if (gf_is_pipe) \
- pclose(gf); \
- else \
- fclose(gf); \
- if (!(gf = popen(cmd, "w" BINARY_FILE_OPTS))) { \
- fprintf(stderr, "Can't run cmd %s\n", cmd); \
- exit(4); \
- } \
- gf_is_pipe = 1; \
- } while (0)
-
- gf = fopen(ofile, "ab"); /* Add 'b' to support non-posix (ie windows) */
- if (!gf) {
- fprintf(stderr, "Can't open file %s for writing\n", ofile); \
- exit(4);
- }
-
- if (compress == 1)
- START_COMPRESSOR;
-
- /* Fill in any hole at the beginning of the text segment. */
- if (verbose)
- printf("ZERO before text len=0x%x\n", text_offs);
- write_zeroes(text_offs, gf);
-
- /* Write the text segment. */
- fwrite(text, text_len, 1, gf);
-
- if (compress == 2)
- START_COMPRESSOR;
-
- /* Write the data segment. */
- fwrite(data, data_len, 1, gf);
-
- if (reloc)
- fwrite(reloc, reloc_len * 4, 1, gf);
-
- if(gf_is_pipe)
- pclose(gf);
- else
- fclose(gf);
-
- exit(0);
-}
-
-
-/*
- * this __MUST__ be at the VERY end of the file - do NOT move!!
- *
- * Local Variables:
- * c-basic-offset: 4
- * tab-width: 8
- * end:
- * vi: tabstop=8 shiftwidth=4 textwidth=79 noexpandtab
- */
+++ /dev/null
-
-ENTRY (_start)
-
-MEMORY {
- flatmem : ORIGIN = 0x0, LENGTH = 0xfffffff
-}
-
-SECTIONS {
-
- .text 0x0 : {
- . = . + 4;
- . = ALIGN(0x4) ;
- _stext = . ;
- *(.text)
- *(.text.*)
- *(.gnu.warning)
- *(.stub)
- *(.gnu.linkonce.t*)
- *(.glue_7t)
- *(.glue_7)
- *(.jcr)
- *(.init)
- *(.fini)
-
-W_RODAT *(.rodata)
-W_RODAT *(.rodata1)
-W_RODAT *(.rodata.*)
-W_RODAT *(.gnu.linkonce.r*)
-
- /* This is special code area at the end of the normal
- text section. It contains a small lookup table at
- the start followed by the code pointed to by entries
- in the lookup table. */
- . = ALIGN (4) ;
- PROVIDE(__ctbp = .);
- *(.call_table_data)
- *(.call_table_text)
-
- . = ALIGN(0x20) ;
- _etext = . ;
- } > flatmem
-
- .data : {
- . = ALIGN(0x4) ;
- _sdata = . ;
- __data_start = . ;
- data_start = . ;
- *(.got.plt)
- *(.got)
- FILL(0) ;
- . = ALIGN(0x20) ;
- LONG(-1)
- . = ALIGN(0x20) ;
-R_RODAT *(.rodata)
-R_RODAT *(.rodata1)
-R_RODAT *(.rodata.*)
-R_RODAT *(.gnu.linkonce.r*)
- *(.data)
- *(.data1)
- *(.data.*)
- *(.gnu.linkonce.d*)
- *(.data1)
- *(.eh_frame)
- *(.gcc_except_table)
-
- /* Microblaze has .sdata and .sbss (small bss). They must
- be contiguous, so please don't move any of this. JW */
- _ssrw = . ;
- *(.sdata)
- *(.sdata.*)
- *(.sbss) /* Don't move this! */
- _essrw = . ;
-
- _ssrw_size = _essrw - _ssrw;
- PROVIDE(_SDA_BASE_ = _ssrw + (_ssrw_size / 2));
-
- *(.gnu.linkonce.s.*)
- *(__libc_atexit)
- *(__libc_subinit)
- *(__libc_subfreeres)
- *(.note.ABI-tag)
-
- /* microblaze-specific read-only small data area
- and associated locating symbols */
- _ssro = . ;
- *(.sdata2)
- _essro = . ;
- _ssro_size = _essro - _ssro;
- PROVIDE(_SDA2_BASE_ = _ssro + (_ssro_size / 2));
-
- . = ALIGN(4) ;
- __CTOR_LIST__ = .;
- LONG((__CTOR_END__ - __CTOR_LIST__) / 4 - 2)
-SINGLE_LINK: /* gcc uses crtbegin.o to find the start of
-SINGLE_LINK: the constructors, so we make sure it is
-SINGLE_LINK: first. Because this is a wildcard, it
-SINGLE_LINK: doesn't matter if the user does not
-SINGLE_LINK: actually link against crtbegin.o; the
-SINGLE_LINK: linker won't look for a file to match a
-SINGLE_LINK: wildcard. The wildcard also means that it
-SINGLE_LINK: doesn't matter which directory crtbegin.o
-SINGLE_LINK: is in. */
-SINGLE_LINK: KEEP (*crtbegin*.o(.ctors))
-SINGLE_LINK: /* We don't want to include the .ctor section from
-SINGLE_LINK: from the crtend.o file until after the sorted ctors.
-SINGLE_LINK: The .ctor section from the crtend file contains the
-SINGLE_LINK: end of ctors marker and it must be last */
-SINGLE_LINK: KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
-SINGLE_LINK: KEEP (*(SORT(.ctors.*)))
- KEEP (*(.ctors))
- LONG(0)
- __CTOR_END__ = .;
- __DTOR_LIST__ = .;
- LONG((__DTOR_END__ - __DTOR_LIST__) / 4 - 2)
-SINGLE_LINK: KEEP (*crtbegin*.o(.dtors))
-SINGLE_LINK: KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
-SINGLE_LINK: KEEP (*(SORT(.dtors.*)))
- KEEP (*(.dtors))
- LONG(0)
- __DTOR_END__ = .;
-
- PROVIDE (__preinit_array_start = .);
- KEEP (*(.preinit_array))
- PROVIDE (__preinit_array_end = .);
-
- PROVIDE (__init_array_start = .);
- KEEP (*(SORT(.init_array.*)))
- KEEP (*(.init_array))
- PROVIDE (__init_array_end = .);
-
- PROVIDE (__fini_array_start = .);
- KEEP (*(.fini_array))
- KEEP (*(SORT(.fini_array.*)))
- PROVIDE (__fini_array_end = .);
-
- . = ALIGN(0x10) ;
- _edata = . ;
- } > flatmem
-
- .bss : {
- . = ALIGN(0x4) ;
- _sbss = ALIGN(0x4) ;
- __bss_start = . ;
- *(.dynsbss)
- *(.sbss)
- *(.sbss.*)
- *(.scommon)
- *(.dynbss)
- *(.bss)
- *(.bss.*)
- *(.bss*)
- *(.gnu.linkonce.b*)
- *(COMMON)
- . = ALIGN(0x10) ;
- _ebss = . ;
- _end = . ;
- end = . ;
- } > flatmem
-
- .stack : {
- . = ALIGN(0x4);
- __stack_start = .;
- }
-
- .junk 0 : { *(.rel*) *(.rela*) }
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_info 0 : { *(.debug_info) }
- .debug_line 0 : { *(.debug_line) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- .debug_aranges 0 : { *(.debug_aranges) }
-}
+++ /dev/null
-/*
- * Copyright (C) 2002-2005 David McCullough <davidm@snapgear.com>
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
- * The Silver Hammer Group, Ltd.
- *
- * This file provides the definitions and structures needed to
- * support uClinux flat-format executables.
- *
- * This is Free Software, under the GNU Public Licence v2 or greater.
- *
- */
-
-#ifndef _LINUX_FLAT_H
-#define _LINUX_FLAT_H
-
-#ifdef __KERNEL__
-#include <linux/types.h>
-#include <asm/flat.h>
-#endif
-
-#define FLAT_VERSION 0x00000004L
-
-#ifdef CONFIG_BINFMT_SHARED_FLAT
-#define MAX_SHARED_LIBS (4)
-#else
-#define MAX_SHARED_LIBS (1)
-#endif
-
-/*
- * To make everything easier to port and manage cross platform
- * development, all fields are in network byte order.
- */
-
-struct flat_hdr {
- char magic[4];
- uint32_t rev; /* version (as above) */
- uint32_t entry; /* Offset of first executable instruction
- with text segment from beginning of file */
- uint32_t data_start; /* Offset of data segment from beginning of
- file */
- uint32_t data_end; /* Offset of end of data segment from beginning
- of file */
- uint32_t bss_end; /* Offset of end of bss segment from beginning
- of file */
-
- /* (It is assumed that data_end through bss_end forms the bss segment.) */
-
- uint32_t stack_size; /* Size of stack, in bytes */
- uint32_t reloc_start; /* Offset of relocation records from beginning
- of file */
- uint32_t reloc_count; /* Number of relocation records */
- uint32_t flags;
- uint32_t build_date; /* When the program/library was built */
- uint32_t filler[5]; /* Reservered, set to zero */
-};
-
-#define FLAT_FLAG_RAM 0x0001 /* load program entirely into RAM */
-#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */
-#define FLAT_FLAG_GZIP 0x0004 /* all but the header is compressed */
-#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */
-#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */
-
-#ifdef __KERNEL__ /* so systems without linux headers can compile the apps */
-/*
- * While it would be nice to keep this header clean, users of older
- * tools still need this support in the kernel. So this section is
- * purely for compatibility with old tool chains.
- *
- * DO NOT make changes or enhancements to the old format please, just work
- * with the format above, except to fix bugs with old format support.
- */
-
-#include <asm/byteorder.h>
-
-#define OLD_FLAT_VERSION 0x00000002L
-#define OLD_FLAT_RELOC_TYPE_TEXT 0
-#define OLD_FLAT_RELOC_TYPE_DATA 1
-#define OLD_FLAT_RELOC_TYPE_BSS 2
-
-typedef union {
- uint32_t value;
- struct {
-# if defined(mc68000) && !defined(CONFIG_COLDFIRE)
- int32_t offset : 30;
- uint32_t type : 2;
-# define OLD_FLAT_FLAG_RAM 0x1 /* load program entirely into RAM */
-# elif defined(__BIG_ENDIAN_BITFIELD)
- uint32_t type : 2;
- int32_t offset : 30;
-# define OLD_FLAT_FLAG_RAM 0x1 /* load program entirely into RAM */
-# elif defined(__LITTLE_ENDIAN_BITFIELD)
- int32_t offset : 30;
- uint32_t type : 2;
-# define OLD_FLAT_FLAG_RAM 0x1 /* load program entirely into RAM */
-# else
-# error "Unknown bitfield order for flat files."
-# endif
- } reloc;
-} flat_v2_reloc_t;
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_FLAT_H */
-
-/* this __MUST__ be at the VERY end of the file - do NOT move!!
- * Local Variables:
- * c-basic-offset: 4
- * tab-width: 8
- * end:
- * vi: tabstop=8 shiftwidth=4 textwidth=79 noexpandtab
- */
+++ /dev/null
-/****************************************************************************/
-/*
- * A simple program to manipulate flat files
- *
- * Copyright (C) 2001-2003 SnapGear Inc, davidm@snapgear.com
- * Copyright (C) 2001 Lineo, davidm@lineo.com
- *
- * This is Free Software, under the GNU Public Licence v2 or greater.
- *
- */
-/****************************************************************************/
-
-#include <stdio.h> /* Userland pieces of the ANSI C standard I/O package */
-#include <unistd.h> /* Userland prototypes of the Unix std system calls */
-#include <time.h>
-#include <stdlib.h> /* exit() */
-#include <string.h> /* strcat(), strcpy() */
-
-/* macros for conversion between host and (internet) network byte order */
-#ifndef WIN32
-#include <netinet/in.h> /* Consts and structs defined by the internet system */
-#define BINARY_FILE_OPTS
-#else
-#include <winsock2.h>
-#define BINARY_FILE_OPTS "b"
-#endif
-
-/* from uClinux-x.x.x/include/linux */
-#include "flat.h" /* Binary flat header description */
-
-#if defined(__MINGW32__)
-#include <getopt.h>
-
-#define mkstemp(p) mktemp(p)
-
-#endif
-
-/****************************************************************************/
-
-char *program_name;
-
-static char cmd[1024];
-static int print = 0, compress = 0, ramload = 0, stacksize = 0, ktrace = 0;
-static int short_format = 0;
-
-/****************************************************************************/
-
-void
-transferr(FILE *ifp, FILE *ofp, int count)
-{
- int n, num;
-
- while (count == -1 || count > 0) {
- if (count == -1 || count > sizeof(cmd))
- num = sizeof(cmd);
- else
- num = count;
- n = fread(cmd, 1, num, ifp);
- if (n == 0)
- break;
- if (fwrite(cmd, n, 1, ofp) != 1) {
- fprintf(stderr, "Write failed :-(\n");
- exit(1);
- }
- if (count != -1)
- count -= n;
- }
- if (count > 0) {
- fprintf(stderr, "Failed to transferr %d bytes\n", count);
- exit(1);
- }
-}
-
-/****************************************************************************/
-
-void
-process_file(char *ifile, char *ofile)
-{
- int old_flags, old_stack, new_flags, new_stack;
- FILE *ifp, *ofp;
- int ofp_is_pipe = 0;
- struct flat_hdr old_hdr, new_hdr;
- char tfile[256];
- char tfile2[256];
-
- *tfile = *tfile2 = '\0';
-
- if ((ifp = fopen(ifile, "r" BINARY_FILE_OPTS)) == NULL) {
- fprintf(stderr, "Cannot open %s\n", ifile);
- return;
- }
-
- if (fread(&old_hdr, sizeof(old_hdr), 1, ifp) != 1) {
- fprintf(stderr, "Cannot read header of %s\n", ifile);
- return;
- }
-
- if (strncmp(old_hdr.magic, "bFLT", 4) != 0) {
- fprintf(stderr, "Cannot read header of %s\n", ifile);
- return;
- }
-
- new_flags = old_flags = ntohl(old_hdr.flags);
- new_stack = old_stack = ntohl(old_hdr.stack_size);
- new_hdr = old_hdr;
-
- if (compress == 1) {
- new_flags |= FLAT_FLAG_GZIP;
- new_flags &= ~FLAT_FLAG_GZDATA;
- } else if (compress == 2) {
- new_flags |= FLAT_FLAG_GZDATA;
- new_flags &= ~FLAT_FLAG_GZIP;
- } else if (compress < 0)
- new_flags &= ~(FLAT_FLAG_GZIP|FLAT_FLAG_GZDATA);
-
- if (ramload > 0)
- new_flags |= FLAT_FLAG_RAM;
- else if (ramload < 0)
- new_flags &= ~FLAT_FLAG_RAM;
-
- if (ktrace > 0)
- new_flags |= FLAT_FLAG_KTRACE;
- else if (ktrace < 0)
- new_flags &= ~FLAT_FLAG_KTRACE;
-
- if (stacksize)
- new_stack = stacksize;
-
- if (print == 1) {
- time_t t;
-
- printf("%s\n", ifile);
- printf(" Magic: %4.4s\n", old_hdr.magic);
- printf(" Rev: %d\n", ntohl(old_hdr.rev));
- t = (time_t) htonl(old_hdr.build_date);
- printf(" Build Date: %s", t?ctime(&t):"not specified\n");
- printf(" Entry: 0x%x\n", ntohl(old_hdr.entry));
- printf(" Data Start: 0x%x\n", ntohl(old_hdr.data_start));
- printf(" Data End: 0x%x\n", ntohl(old_hdr.data_end));
- printf(" BSS End: 0x%x\n", ntohl(old_hdr.bss_end));
- printf(" Stack Size: 0x%x\n", ntohl(old_hdr.stack_size));
- printf(" Reloc Start: 0x%x\n", ntohl(old_hdr.reloc_start));
- printf(" Reloc Count: 0x%x\n", ntohl(old_hdr.reloc_count));
- printf(" Flags: 0x%x ( ", ntohl(old_hdr.flags));
- if (old_flags) {
- if (old_flags & FLAT_FLAG_RAM)
- printf("Load-to-Ram ");
- if (old_flags & FLAT_FLAG_GOTPIC)
- printf("Has-PIC-GOT ");
- if (old_flags & FLAT_FLAG_GZIP)
- printf("Gzip-Compressed ");
- if (old_flags & FLAT_FLAG_GZDATA)
- printf("Gzip-Data-Compressed ");
- if (old_flags & FLAT_FLAG_KTRACE)
- printf("Kernel-Traced-Load ");
- printf(")\n");
- }
- } else if (print > 1) {
- static int first = 1;
- unsigned int text, data, bss, stk, rel, tot;
-
- if (first) {
- printf("Flag Rev Text Data BSS Stack Relocs RAM Filename\n");
- printf("-----------------------------------------------------------\n");
- first = 0;
- }
- *tfile = '\0';
- strcat(tfile, (old_flags & FLAT_FLAG_KTRACE) ? "k" : "");
- strcat(tfile, (old_flags & FLAT_FLAG_RAM) ? "r" : "");
- strcat(tfile, (old_flags & FLAT_FLAG_GOTPIC) ? "p" : "");
- strcat(tfile, (old_flags & FLAT_FLAG_GZIP) ? "z" :
- ((old_flags & FLAT_FLAG_GZDATA) ? "d" : ""));
- printf("-%-3.3s ", tfile);
- printf("%3d ", ntohl(old_hdr.rev));
- printf("%6d ", text=ntohl(old_hdr.data_start)-sizeof(struct flat_hdr));
- printf("%6d ", data=ntohl(old_hdr.data_end)-ntohl(old_hdr.data_start));
- printf("%6d ", bss=ntohl(old_hdr.bss_end)-ntohl(old_hdr.data_end));
- printf("%6d ", stk=ntohl(old_hdr.stack_size));
- printf("%6d ", rel=ntohl(old_hdr.reloc_count) * 4);
- /*
- * work out how much RAM is needed per invocation, this
- * calculation is dependent on the binfmt_flat implementation
- */
- tot = data; /* always need data */
-
- if (old_flags & (FLAT_FLAG_RAM|FLAT_FLAG_GZIP))
- tot += text + sizeof(struct flat_hdr);
-
- if (bss + stk > rel) /* which is bigger ? */
- tot += bss + stk;
- else
- tot += rel;
-
- printf("%6d ", tot);
- /*
- * the total depends on whether the relocs are smaller/bigger than
- * the BSS
- */
- printf("%s\n", ifile);
- }
-
- /* if there is nothing else to do, leave */
- if (new_flags == old_flags && new_stack == old_stack)
- return;
-
- new_hdr.flags = htonl(new_flags);
- new_hdr.stack_size = htonl(new_stack);
-
- strcpy(tfile, "/tmp/flatXXXXXX");
- mkstemp(tfile);
- if ((ofp = fopen(tfile, "w" BINARY_FILE_OPTS)) == NULL) {
- fprintf(stderr, "Failed to open %s for writing\n", tfile);
- unlink(tfile);
- unlink(tfile2);
- exit(1);
- }
-
- if (fwrite(&new_hdr, sizeof(new_hdr), 1, ofp) != 1) {
- fprintf(stderr, "Failed to write to %s\n", tfile);
- unlink(tfile);
- unlink(tfile2);
- exit(1);
- }
-
- /*
- * get ourselves a fully uncompressed copy of the text/data/relocs
- * so that we can manipulate it more easily
- */
- if (old_flags & (FLAT_FLAG_GZIP|FLAT_FLAG_GZDATA)) {
- FILE *tfp;
-
- strcpy(tfile2, "/tmp/flat2XXXXXX");
- mkstemp(tfile2);
-
- if (old_flags & FLAT_FLAG_GZDATA) {
- tfp = fopen(tfile2, "w" BINARY_FILE_OPTS);
- if (!tfp) {
- fprintf(stderr, "Failed to open %s for writing\n", tfile2);
- exit(1);
- }
- transferr(ifp, tfp, ntohl(old_hdr.data_start) -
- sizeof(struct flat_hdr));
- fclose(tfp);
- }
-
- sprintf(cmd, "gunzip >> %s", tfile2);
- tfp = popen(cmd, "w" BINARY_FILE_OPTS);
- if(!tfp) {
- perror("popen");
- exit(1);
- }
- transferr(ifp, tfp, -1);
- pclose(tfp);
-
- fclose(ifp);
- ifp = fopen(tfile2, "r" BINARY_FILE_OPTS);
- if (!ifp) {
- fprintf(stderr, "Failed to open %s for reading\n", tfile2);
- unlink(tfile);
- unlink(tfile2);
- exit(1);
- }
- }
-
- if (new_flags & FLAT_FLAG_GZIP) {
- printf("zflat %s --> %s\n", ifile, ofile);
- fclose(ofp);
- sprintf(cmd, "gzip -9 -f >> %s", tfile);
- ofp = popen(cmd, "w" BINARY_FILE_OPTS);
- ofp_is_pipe = 1;
- } else if (new_flags & FLAT_FLAG_GZDATA) {
- printf("zflat-data %s --> %s\n", ifile, ofile);
- transferr(ifp, ofp, ntohl(new_hdr.data_start) -
- sizeof(struct flat_hdr));
- fclose(ofp);
- sprintf(cmd, "gzip -9 -f >> %s", tfile);
- ofp = popen(cmd, "w" BINARY_FILE_OPTS);
- ofp_is_pipe = 1;
- }
-
- if (!ofp) { /* can only happen if using gzip/gunzip */
- fprintf(stderr, "Can't run cmd %s\n", cmd);
- unlink(tfile);
- unlink(tfile2);
- exit(1);
- }
-
- transferr(ifp, ofp, -1);
-
- if (ferror(ifp) || ferror(ofp)) {
- fprintf(stderr, "Error on file pointer%s%s\n",
- ferror(ifp) ? " input" : "", ferror(ofp) ? " output" : "");
- unlink(tfile);
- unlink(tfile2);
- exit(1);
- }
-
- fclose(ifp);
- if (ofp_is_pipe)
- pclose(ofp);
- else
- fclose(ofp);
-
- /* cheat a little here to preserve file permissions */
- sprintf(cmd, "cp %s %s", tfile, ofile);
- system(cmd);
- unlink(tfile);
- unlink(tfile2);
-}
-
-/****************************************************************************/
-
-void
-usage(char *s)
-{
- if (s)
- fprintf(stderr, "%s\n", s);
- fprintf(stderr, "usage: %s [options] flat-file\n", program_name);
- fprintf(stderr, " Allows you to change an existing flat file\n\n");
- fprintf(stderr, " -p : print current settings\n");
- fprintf(stderr, " -z : compressed flat file\n");
- fprintf(stderr, " -d : compressed data-only flat file\n");
- fprintf(stderr, " -Z : un-compressed flat file\n");
- fprintf(stderr, " -r : ram load\n");
- fprintf(stderr, " -R : do not RAM load\n");
- fprintf(stderr, " -k : kernel traced load (for debug)\n");
- fprintf(stderr, " -K : normal non-kernel traced load\n");
- fprintf(stderr, " -s size : stack size\n");
- fprintf(stderr, " -o file : output-file\n"
- " (default is to modify input file)\n");
- exit(1);
-}
-
-/****************************************************************************/
-
-int
-main(int argc, char *argv[])
-{
- int c;
- char *ofile = NULL, *ifile;
-
- program_name = argv[0];
-
- while ((c = getopt(argc, argv, "pdzZrRkKs:o:")) != EOF) {
- switch (c) {
- case 'p': print = 1; break;
- case 'z': compress = 1; break;
- case 'd': compress = 2; break;
- case 'Z': compress = -1; break;
- case 'r': ramload = 1; break;
- case 'R': ramload = -1; break;
- case 'k': ktrace = 1; break;
- case 'K': ktrace = -1; break;
- case 's': stacksize = atoi(optarg); break;
- case 'o': ofile = optarg; break;
- default:
- usage("invalid option");
- break;
- }
- }
-
- if (optind >= argc)
- usage("No input files provided");
-
- if (ofile && argc - optind > 1)
- usage("-o can only be used with a single file");
-
- if (!print && !compress && !ramload && !stacksize) /* no args == print */
- print = argc - optind; /* greater than 1 is short format */
-
- for (c = optind; c < argc; c++) {
- ifile = argv[c];
- if (!ofile)
- ofile = ifile;
- process_file(ifile, ofile);
- ofile = NULL;
- }
-
- exit(0);
-}
-
-/****************************************************************************/
+++ /dev/null
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission. M.I.T. makes no representations about the
-# suitability of this software for any purpose. It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
- case $1 in
- -c) instcmd="$cpprog"
- shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd="$stripprog"
- shift
- continue;;
-
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
-
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
- continue;;
-
- *) if [ x"$src" = x ]
- then
- src=$1
- else
- # this colon is to work around a 386BSD /bin/sh bug
- :
- dst=$1
- fi
- shift
- continue;;
- esac
-done
-
-if [ x"$src" = x ]
-then
- echo "install: no input file specified"
- exit 1
-else
- :
-fi
-
-if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
-
- if [ -d $dst ]; then
- instcmd=:
- chmodcmd=""
- else
- instcmd=$mkdirprog
- fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
- if [ -f $src -o -d $src ]
- then
- :
- else
- echo "install: $src does not exist"
- exit 1
- fi
-
- if [ x"$dst" = x ]
- then
- echo "install: no destination specified"
- exit 1
- else
- :
- fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
- if [ -d $dst ]
- then
- dst="$dst"/`basename $src`
- else
- :
- fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-# this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
- '
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
- pathcomp="${pathcomp}${1}"
- shift
-
- if [ ! -d "${pathcomp}" ] ;
- then
- $mkdirprog "${pathcomp}"
- else
- :
- fi
-
- pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
- $doit $instcmd $dst &&
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
- if [ x"$transformarg" = x ]
- then
- dstfile=`basename $dst`
- else
- dstfile=`basename $dst $transformbasename |
- sed $transformarg`$transformbasename
- fi
-
-# don't allow the sed command to completely eliminate the filename
-
- if [ x"$dstfile" = x ]
- then
- dstfile=`basename $dst`
- else
- :
- fi
-
-# Make a temp file name in the proper directory.
-
- dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
- $doit $instcmd $src $dsttmp &&
-
- trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing. If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi &&
-
-# Now rename the file to the real destination.
-
- $doit $rmcmd -f $dstdir/$dstfile &&
- $doit $mvcmd $dsttmp $dstdir/$dstfile
-
-fi &&
-
-
-exit 0
+++ /dev/null
-#!/bin/sh
-#
-# allow us to do flat processing if the flag -Wl,-elf2flt or -elf2flt to
-# the 'C' compiler or linker respectively
-#
-# uses the env. var FLTFLAGS as extra parameters to pass to elf2flt
-# arguments given like -Wl,-elf2flt="-b 10000 -v" are given before FLTFLAGS
-#
-# Copyright (C) 2002,2003 David McCullough <davidm@snapgear.com>
-# Copyright (C) 2000, Lineo. davidm@lineo.com
-#
-# This is Free Software, under the GNU Public Licence v2 or greater.
-#
-
-LINKER="$0.real" # the original renamed-linker
-ELF2FLT="`expr $0 : '\(.*\)ld'`elf2flt"
-NM="`expr $0 : '\(.*\)ld'`nm"
-TOOLDIR="`dirname $0`" # let gcc find the tools for us
-OBJCOPY="`expr $0 : '\(.*\)ld'`objcopy"
-[ -f "$OBJCOPY" ] || OBJCOPY="$TOOLDIR/../../bin/@target_alias@-objcopy"
-OBJDUMP="`expr $OBJCOPY : '\(.*\)objcopy'`objdump"
-LDSCRIPTPATH="@binutils_ldscript_dir@" # and the scripts
-SHARED_ID=""
-NEWLDSCRIPT=""
-
-# check TOOLDIR from prefix/bin/ or prefix/target-alias/bin/
-[ -d "${LDSCRIPTPATH}" ] || LDSCRIPTPATH="${TOOLDIR}/../lib"
-
-#
-# if we have the elf2flt options, run it
-#
-
-if expr "$*" : ".*-elf2flt.*" > /dev/null
-then
- ARG1=
- ARG2=
- OFILE="a.out"
- PIC=
- SDIRS=
- LDSCRIPT=
- FINAL="yes"
- FINAL_ONLY=
- MOVDAT=
- VERBOSE=
-
- while [ $# -ne 0 ]
- do
- case "$1" in
-
- -elf2flt) ;; # we already know this
- -elf2flt*)FLTFLAGS="`expr \"$1\" : '-elf2flt=\(.*\)'` $FLTFLAGS";;
-
- -move-rodata)
- MOVDAT="y";; # Put rodata in ROM if possible
-
- -shared-lib-id)
- shift; SHARED_ID="$1";; # Shared library ID
-
- -o) shift; OFILE="$1";; # the final outfile
- -o*) OFILE="`expr \"$1\" : '-o\(.*\)'`";;
-
- -T) shift; LDSCRIPT="$1";; # they have a linker script
- -c) shift; LDSCRIPT="$1";;
-
- -L) ARG1="$ARG1 $1" # remember search dirs
- shift;
- ARG1="$ARG1 $1"
- SDIRS="$SDIRS -L$1"
- ;;
- -L*) ARG1="$ARG1 $1"; SDIRS="$SDIRS $1";;
-
- -EB) ARG1="$ARG1 $1"; SDIRS="$SDIRS $1";; # arm big endian
-
- -relax) ;; # eat this for microblaze
-
- -r|-Ur) FINAL="" # this is not a final link
- ARG1="$ARG1 $1"
- ;;
-
- -v) ARG1="$ARG1 $1"
- VERBOSE="y"
- ;;
-
- -m) shift; EMUL="-m $1";; # ld emulations for h8300
- -m*) EMUL=$1;;
-
- *) ARG1="$ARG1 $1"
- ;;
- esac
- shift
- done
-
- if [ "$FINAL" = "yes" ]
- then
- [ "$VERBOSE" = "y" ] && set -x
- ARG1="$ARG1 $FINAL_ONLY"
- NEWLDSCRIPT=`mktemp /tmp/flt-XXXXXX`
- SEDOP=" -e s/^R_RODAT// -e /^W_RODAT/d"
- OBJCOPYOP=""
- if [ "$MOVDAT" ]
- then
- $LINKER -r -d -o "$OFILE.elf2flt" $ARG1 || exit $?
- if [ "`$OBJDUMP -h "$OFILE.elf2flt" | \
- egrep -A1 '[.]rodata' | grep RELOC`" ]
- then
- echo "warning: .rodata section contains relocations"
- else
- SEDOP="-e /^R_RODAT/d -e s/^W_RODAT//"
- fi
- fi
- if [ "$SHARED_ID" ]
- then
- # Massage the linker script into something useful. These
- # regexps are ugly due to some bizzare shell quoting rules.
- # SEDOP="$SEDOP -e \"s/ORIGIN = 0x0,/ORIGIN = 0x${SHARED_ID}000000,/\""
- # SEDOP="$SEDOP -e \"s/.text 0x0 :/.text 0x${SHARED_ID}000000 :/\""
- SEDOP="$SEDOP -e s/\\(ORIGIN.=.0\\)x0,/\\1x${SHARED_ID}000000,/"
- SEDOP="$SEDOP -e s/\\([.]text.0\\)x0[^0-9]:/\\1x${SHARED_ID}000000:/"
-
- if [ "$SHARED_ID" -gt 0 ]
- then
- # Non application modules enter via main not _start
- # SEDOP="$SEDOP -e 's/ENTRY (_start)/ENTRY (main)/'"
- SEDOP="$SEDOP -e s/\\(ENTRY.\\)(_start)/\1(lib_main)/"
- OBJCOPYOP="--localize-hidden --weaken"
- fi
-
- # Provide the magic parameter that defines the library data segment pointer offset
- case "@target_cpu@" in
- h8300) GOT_OFFSET="__current_shared_library_er5_offset_";;
- *) GOT_OFFSET="_current_shared_library_a5_offset_";;
- esac
- ARG1="$ARG1 -defsym $GOT_OFFSET=`expr ${SHARED_ID} '*' -4 - 4`"
- fi
- if [ "@emit_relocs@" = "yes" ]
- then
- SEDOP="$SEDOP -e s/^SINGLE_LINK://"
- else
- SEDOP="$SEDOP -e /^SINGLE_LINK:/d"
- fi
-
- # provide a default linker script, we usually need one
- [ -z "$LDSCRIPT" ] && LDSCRIPT="${LDSCRIPTPATH}/elf2flt.ld"
-
- # if we can find the linker script we preprocess it, otherwise
- # we assume the user knows what they are doing
- if [ -f "$LDSCRIPT" ]; then
- sed $SEDOP < "$LDSCRIPT" > "$NEWLDSCRIPT"
- LDSCRIPT="$NEWLDSCRIPT"
- elif [ -f "${LDSCRIPTPATH}/$LDSCRIPT" ]; then
- sed $SEDOP < "${LDSCRIPTPATH}/$LDSCRIPT" > "$NEWLDSCRIPT"
- LDSCRIPT="$NEWLDSCRIPT"
- elif [ -f "${LDSCRIPTPATH}/ldscripts/$LDSCRIPT" ]; then
- sed $SEDOP < "${LDSCRIPTPATH}/ldscripts/$LDSCRIPT" > "$NEWLDSCRIPT"
- LDSCRIPT="$NEWLDSCRIPT"
- fi
-
- if [ "@emit_relocs@" = "yes" ]
- then
- $LINKER $EMUL $SDIRS -T $LDSCRIPT -q -o "$OFILE.gdb" $ARG1 ||exit $?
- RFILE="$OFILE.gdb"
- FLTFLAGS="$FLTFLAGS -a"
- else
- if [ "@got_check@" = "no" ]
- then
- $LINKER $EMUL $SDIRS -T $LDSCRIPT -Ur -d -o "$OFILE.elf" $ARG1 ||exit $?
- $LINKER $EMUL $SDIRS -T $LDSCRIPT -o "$OFILE.gdb" $ARG1 ||exit $?
- else
- $LINKER $EMUL -r -d -o "$OFILE.elf2flt" $ARG1 ||exit $?
- $LINKER $EMUL $SDIRS -T $LDSCRIPT -Ur -o "$OFILE.elf" "$OFILE.elf2flt" ||exit $?
- $LINKER $EMUL $SDIRS -T $LDSCRIPT -o "$OFILE.gdb" "$OFILE.elf2flt" ||exit $?
- rm -f "$OFILE.elf2flt"
- fi
- RFILE="$OFILE.elf"
- fi
- if $NM "$OFILE.gdb" | grep _GLOBAL_OFFSET_TABLE_ > /dev/null
- then
- $ELF2FLT $FLTFLAGS -o "$OFILE" -p "$OFILE.gdb" "$RFILE" || exit $?
- else
- $ELF2FLT $FLTFLAGS -o "$OFILE" -r "$RFILE" || exit $?
- fi
- if [ "$OBJCOPYOP" ]
- then
- if $OBJCOPY $OBJCOPYOP --help > /dev/null 2>&1
- then
- $OBJCOPY $OBJCOPYOP "$OFILE.gdb" ||exit $?
- else
- case " $OBJCOPYOP " in
- *" --localize-hidden "*)
- SYMS=`mktemp /tmp/flt-XXXXXX`
- $OBJDUMP --syms "$OFILE.gdb" > "$SYMS" ||exit $?
- sed -n 's/.*\(\.hidden\|\.internal\) \(.*\)/-L \2/p' < "$SYMS" > "$SYMS.hidden" ||exit $?
- if [ -s "$SYMS.hidden" ]
- then
- xargs ${VERBOSE:+-t} $OBJCOPY "$OFILE.gdb" < "$SYMS.hidden" ||exit $?
- fi
- rm -f "$SYMS" "$SYMS.hidden"
- ;;
- esac
- case " $OBJCOPYOP " in
- *" --weaken "*)
- $OBJCOPY --weaken "$OFILE.gdb" ||exit $?
- ;;
- esac
- fi
- fi
- [ "$RFILE" = "$OFILE.gdb" ] || rm -f "$RFILE" # not needed for any reason
- rm -f "$NEWLDSCRIPT"
- exit 0
- fi
-
- exec $LINKER -o "$OFILE" $ARG1
-fi
-
-#
-# otherwise pretend we aren't here
-#
-
-exec $LINKER "$@"
+++ /dev/null
-#!/bin/bash
-
-cvs_stamp=$(cut -d/ -f4 CVS/Entries | sort | tail -n 1)
-stamp=$(date +%Y%m%d --date="${cvs_stamp}")
-
-p="elf2flt-${stamp}"
-rm -f elf2flt-*.tar.bz2
-mkdir ../${p}
-cp -r * ../${p}/ || exit 1
-tar jcf ${p}.tar.bz2 --exclude .svn -C .. ${p}
-rm -r ../${p} || exit 1
-du -b ${p}.tar.bz2
+++ /dev/null
-#ifndef HAVE_DCGETTEXT
-const char *dcgettext (const char *domain, const char *msg, int category)
-{
- return msg;
-}
-#endif /* !HAVE_DCGETTEXT */
# Include files required for the internal toolchain backend
-include toolchain/elf2flt/elf2flt.mk
include toolchain/gcc/gcc-uclibc-4.x.mk
include toolchain/kernel-headers/kernel-headers.mk
include toolchain/uClibc/uclibc.mk
help
Build the thread library with debugging enabled.
-source "toolchain/elf2flt/Config.in"
+source "package/elf2flt/Config.in.host"
config BR2_VFP_FLOAT
bool "Use ARM Vector Floating Point unit"
# Explicit ordering:
include toolchain/helpers.mk
-include toolchain/elf2flt/elf2flt.mk
include toolchain/gcc/gcc-uclibc-4.x.mk
include toolchain/toolchain-crosstool-ng/crosstool-ng.mk
include toolchain/uClibc/uclibc.mk
# Required includes for the external toolchain backend
include toolchain/helpers.mk
-include toolchain/elf2flt/elf2flt.mk
include toolchain/gcc/gcc-uclibc-4.x.mk
include toolchain/kernel-headers/kernel-headers.mk
include toolchain/toolchain-external/ext-tool.mk
projects / buildroot.git / commitdiff