bool "AT45 dataflash with 528 byte pagesize"
select BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER
-config BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_512_16K
- bool "NAND flash with 512B Page and 16 kB erasesize"
+config BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_16K
+ bool "NAND flash with 16 kB erasesize"
select BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER
-config BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_2K_128K
- bool "NAND flash with 2kB Page and 128 kB erasesize"
+config BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_128K
+ bool "NAND flash with 128 kB erasesize"
select BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER
config BR2_TARGET_ROOTFS_JFFS2_FLASH_128
- bool "Parallel flash with 4 kB pagesize and 128 kB erase size"
+ bool "Parallel flash with 128 kB erase size"
config BR2_TARGET_ROOTFS_JFFS2_FLASH_64
- bool "Parallel flash with 4 kB pagesize and 64 kB erase size"
+ bool "Parallel flash with 64 kB erase size"
config BR2_TARGET_ROOTFS_JFFS2_CUSTOM
- bool "Select custom page and erase size"
+ bool "Select custom erase size"
endchoice
-config BR2_TARGET_ROOTFS_JFFS2_CUSTOM_PAGESIZE
- hex "Page Size"
- depends on BR2_TARGET_ROOTFS_JFFS2_CUSTOM
- default 0x1000
- help
- Set to pagesize of memory
-
config BR2_TARGET_ROOTFS_JFFS2_CUSTOM_EBSIZE
hex "Erase block size"
depends on BR2_TARGET_ROOTFS_JFFS2_CUSTOM
help
Set to erase size of memory
-config BR2_TARGET_ROOTFS_JFFS2_PAGESIZE
- hex
- default 0x420 if BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056
- default 0x210 if BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528
- default 0x200 if BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_512_16K
- default 0x800 if BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_2K_128K
- default 0x1000 if BR2_TARGET_ROOTFS_JFFS2_FLASH_128
- default 0x1000 if BR2_TARGET_ROOTFS_JFFS2_FLASH_64
- default BR2_TARGET_ROOTFS_JFFS2_CUSTOM_PAGESIZE if BR2_TARGET_ROOTFS_JFFS2_CUSTOM
-
config BR2_TARGET_ROOTFS_JFFS2_EBSIZE
hex
default 0x2100 if BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056
default 0x1080 if BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528
- default 0x4000 if BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_512_16K
- default 0x20000 if BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_2K_128K
+ default 0x4000 if BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_16K
+ default 0x20000 if BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_128K
default 0x20000 if BR2_TARGET_ROOTFS_JFFS2_FLASH_128
default 0x10000 if BR2_TARGET_ROOTFS_JFFS2_FLASH_64
default BR2_TARGET_ROOTFS_JFFS2_CUSTOM_EBSIZE if BR2_TARGET_ROOTFS_JFFS2_CUSTOM
bool "Do not use Cleanmarker"
default y if BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_1056
default y if BR2_TARGET_ROOTFS_JFFS2_DATAFLASH_528
- default y if BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_512_16K
- default y if BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_2K_128K
+ default y if BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_16K
+ default y if BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_128K
help
Do not use cleanmarkers if using NAND flash or Dataflash where
the pagesize is not a power of 2
A summarised image can be mounted faster if support is
enabled in the kernel (CONFIG_JFFS2_SUMMARY)
+config BR2_TARGET_ROOTFS_JFFS2_USE_CUSTOM_PAGESIZE
+ bool "Select custom virtual memory page size"
+ help
+ Use a custom virtual memory page size. Note that this is not related to
+ the flash memory page size. Using this option is only needed if Linux is
+ configured to use a page size different than 4kB.
+
+
+config BR2_TARGET_ROOTFS_JFFS2_CUSTOM_PAGESIZE
+ hex "Virtual memory page size"
+ depends on BR2_TARGET_ROOTFS_JFFS2_USE_CUSTOM_PAGESIZE
+ default 0x1000
+ help
+ Set to virtual memory page size of target system (in bytes). This value
+ should match the virtual page size in Linux (i.e. this should have the
+ same value as the value of the PAGE_SIZE macro in Linux). It is not
+ related to the flash memory page size.
+
endif