--- /dev/null
+// -*- mode:c++ -*-
+
+// Copyright (c) 2007 The Hewlett-Packard Development Company
+// All rights reserved.
+//
+// Redistribution and use of this software in source and binary forms,
+// with or without modification, are permitted provided that the
+// following conditions are met:
+//
+// The software must be used only for Non-Commercial Use which means any
+// use which is NOT directed to receiving any direct monetary
+// compensation for, or commercial advantage from such use. Illustrative
+// examples of non-commercial use are academic research, personal study,
+// teaching, education and corporate research & development.
+// Illustrative examples of commercial use are distributing products for
+// commercial advantage and providing services using the software for
+// commercial advantage.
+//
+// If you wish to use this software or functionality therein that may be
+// covered by patents for commercial use, please contact:
+// Director of Intellectual Property Licensing
+// Office of Strategy and Technology
+// Hewlett-Packard Company
+// 1501 Page Mill Road
+// Palo Alto, California 94304
+//
+// Redistributions of source code must retain the above copyright notice,
+// this list of conditions and the following disclaimer. Redistributions
+// in binary form must reproduce the above copyright notice, this list of
+// conditions and the following disclaimer in the documentation and/or
+// other materials provided with the distribution. Neither the name of
+// the COPYRIGHT HOLDER(s), HEWLETT-PACKARD COMPANY, nor the names of its
+// contributors may be used to endorse or promote products derived from
+// this software without specific prior written permission. No right of
+// sublicense is granted herewith. Derivatives of the software and
+// output created using the software may be prepared, but only for
+// Non-Commercial Uses. Derivatives of the software may be shared with
+// others provided: (i) the others agree to abide by the list of
+// conditions herein which includes the Non-Commercial Use restrictions;
+// and (ii) such Derivatives of the software include the above copyright
+// notice to acknowledge the contribution from this software where
+// applicable, this list of conditions and the disclaimer below.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+//
+// Authors: Gabe Black
+
+////////////////////////////////////////////////////////////////////
+//
+// Code to "assemble" microcode sequences
+//
+
+let {{
+ class MicroOpStatement:
+ def __init__(self):
+ self.className = ''
+ self.label = ''
+ self.args = []
+
+ def getAllocator(self, labelDict = {}):
+ args = ''
+ for arg in self.args:
+ if arg.has_key("operandConst"):
+ args += ", %s" % arg["operandConst"]
+ elif arg.has_key("operandCode"):
+ args += ", %s" % arg["operandCode"]
+ elif arg.has_key("operandLabel"):
+ if not labelDict.has_key(arg["operandLabel"]):
+ print "Unrecognized label %s!" % arg["operandLabel"]
+ args += ", %s" % labelDict[arg["operandLabel"]]
+ else:
+ print "Unrecognized operand type!"
+ return 'new %s(machInst %s)' % (self.className, args)
+
+
+ def assembleMicro(code):
+ # This function takes in a block of microcode assembly and returns
+ # a python list of objects which describe it.
+
+ # Keep this around in case we need it later
+ orig_code = code
+ # A list of the statements we've found thus far
+ statements = []
+
+ # Regular expressions to pull each piece of the statement out at a
+ # time. Each expression expects the thing it's looking for to be at
+ # the beginning of the line, so the previous component is stripped
+ # before continuing.
+ labelRe = re.compile(r'^[ \t]*(?P<label>[a-zA-Z_]\w*)[ \t]:')
+ lineRe = re.compile(r'^(?P<line>[^\n][^\n]*)$')
+ classRe = re.compile(r'^[ \t]*(?P<className>[a-zA-Z_]\w*)')
+ # This recognizes three different flavors of operands:
+ # 1. Raw decimal numbers composed of digits between 0 and 9
+ # 2. Code beginning with "{" and continuing until the first "}"
+ # ^ This one might need revising
+ # 3. A label, which starts with a capital or small letter, or
+ # underscore, which is optionally followed by a sequence of
+ # capital or small letters, underscores, or digts between 0 and 9
+ opRe = re.compile( \
+ r'^[ \t]*((?P<operandLabel>[a-zA-Z_]\w*)|(?P<operandConst>[0-9][0-9]*)|(\{(?P<operandCode>[^}]*)\}))')
+ lineMatch = lineRe.search(code)
+ while lineMatch != None:
+ statement = MicroOpStatement()
+ # Get a line and seperate it from the rest of the code
+ line = lineMatch.group("line")
+ print "Parsing line %s" % line
+ code = lineRe.sub('', code, 1)
+
+ # Find the label, if any
+ labelMatch = labelRe.search(line)
+ if labelMatch != None:
+ statement.label = labelMatch.group("label")
+ print "Found label %s." % statement.label
+ # Clear the label from the statement
+ line = labelRe.sub('', line, 1)
+
+ # Find the class name which is roughly equivalent to the op name
+ classMatch = classRe.search(line)
+ if classMatch == None:
+ print "Oh no! I can't find what instruction you want!"
+ print "I should really bail out here, but I don't know how!"
+ else:
+ statement.className = classMatch.group("className")
+ print "Found class name %s." % statement.className
+
+ # Clear the class name from the statement
+ line = classRe.sub('', line, 1)
+
+ #Find as many arguments as you can
+ statement.args = []
+ opMatch = opRe.search(line)
+ while opMatch is not None:
+ statement.args.append({})
+ # args is a list of dicts which collect different
+ # representations of operand values. Different forms might be
+ # needed in different places, for instance to replace a label
+ # with an offset.
+ for opType in ("operandLabel", "operandConst", "operandCode"):
+ if opMatch.group(opType):
+ statement.args[-1][opType] = opMatch.group(opType)
+ if len(statement.args[-1]) == 0:
+ print "I had a problem parsing an operand!"
+ line = opRe.sub('', line, 1)
+ print "Found operand %s." % statement.args[-1]
+ opMatch = opRe.search(line)
+ print "Found operands", statement.args
+
+ # Add this statement to our collection
+ statements.append(statement)
+
+ # Get the next line
+ lineMatch = lineRe.search(code)
+ return statements
+
+ def buildLabelDict(ops):
+ labels = {}
+ count = 0
+ for op in ops:
+ if op.label:
+ labels[op.label] = count
+ count += 1
+}};