* mips.h: Remove "mi" documentation. Update "mh" documentation.
(OP_MASK_MI, OP_SH_MI, MICROMIPSOP_MASK_MI, MICROMIPSOP_MASK_MI):
Delete.
(INSN2_WRITE_GPR_MHI): Rename to...
(INSN2_WRITE_GPR_MH): ...this.
opcodes/
* micromips-opc.c (WR_mhi): Rename to..
(WR_mh): ...this.
(micromips_opcodes): Update "movep" entry accordingly. Replace
"mh,mi" with "mh".
* mips-dis.c (micromips_to_32_reg_h_map): Rename to...
(micromips_to_32_reg_h_map1): ...this.
(micromips_to_32_reg_i_map): Rename to...
(micromips_to_32_reg_h_map2): ...this.
(print_micromips_insn): Remove "mi" case. Print both registers
in the pair for "mh".
gas/
* config/tc-mips.c (mips32_to_micromips_reg_h_map): Delete.
(micromips_to_32_reg_h_map): Rename to...
(micromips_to_32_reg_h_map1): ...this.
(micromips_to_32_reg_i_map): Rename to...
(micromips_to_32_reg_h_map2): ...this.
(mips_lookup_reg_pair): New function.
(gpr_write_mask, macro): Adjust after above renaming.
(validate_micromips_insn): Remove "mi" handling.
(mips_ip): Likewise. Parse both registers in a pair for "mh".
+2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * config/tc-mips.c (mips32_to_micromips_reg_h_map): Delete.
+ (micromips_to_32_reg_h_map): Rename to...
+ (micromips_to_32_reg_h_map1): ...this.
+ (micromips_to_32_reg_i_map): Rename to...
+ (micromips_to_32_reg_h_map2): ...this.
+ (mips_lookup_reg_pair): New function.
+ (gpr_write_mask, macro): Adjust after above renaming.
+ (validate_micromips_insn): Remove "mi" handling.
+ (mips_ip): Likewise. Parse both registers in a pair for "mh".
+
2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn)
#define mips32_to_micromips_reg_l_map mips32_to_16_reg_map
#define X ILLEGAL_REG
-/* reg type h: 4, 5, 6. */
-static const int mips32_to_micromips_reg_h_map[] =
-{
- X, X, X, X, 4, 5, 6, X,
- X, X, X, X, X, X, X, X,
- X, X, X, X, X, X, X, X,
- X, X, X, X, X, X, X, X
-};
-
/* reg type m: 0, 17, 2, 3, 16, 18, 19, 20. */
static const int mips32_to_micromips_reg_m_map[] =
{
#define micromips_to_32_reg_g_map mips16_to_32_reg_map
/* The microMIPS registers with type h. */
-static const unsigned int micromips_to_32_reg_h_map[] =
+static const unsigned int micromips_to_32_reg_h_map1[] =
{
5, 5, 6, 4, 4, 4, 4, 4
};
-
-/* The microMIPS registers with type i. */
-static const unsigned int micromips_to_32_reg_i_map[] =
+static const unsigned int micromips_to_32_reg_h_map2[] =
{
6, 7, 7, 21, 22, 5, 6, 7
};
return ok && reglist != 0;
}
+static unsigned int
+mips_lookup_reg_pair (unsigned int regno1, unsigned int regno2,
+ const unsigned int *map1, const unsigned int *map2,
+ unsigned int count)
+{
+ unsigned int i;
+
+ for (i = 0; i < count; i++)
+ if (map1[i] == regno1 && map2[i] == regno2)
+ return i;
+ return ILLEGAL_REG;
+}
+
/* Return TRUE if opcode MO is valid on the currently selected ISA, ASE
and architecture. Use is_opcode_valid_16 for MIPS16 opcodes. */
{
if (pinfo2 & INSN2_WRITE_GPR_MB)
mask |= 1 << micromips_to_32_reg_b_map[EXTRACT_OPERAND (1, MB, *ip)];
- if (pinfo2 & INSN2_WRITE_GPR_MHI)
+ if (pinfo2 & INSN2_WRITE_GPR_MH)
{
- mask |= 1 << micromips_to_32_reg_h_map[EXTRACT_OPERAND (1, MH, *ip)];
- mask |= 1 << micromips_to_32_reg_i_map[EXTRACT_OPERAND (1, MI, *ip)];
+ mask |= 1 << micromips_to_32_reg_h_map1[EXTRACT_OPERAND (1, MH, *ip)];
+ mask |= 1 << micromips_to_32_reg_h_map2[EXTRACT_OPERAND (1, MH, *ip)];
}
if (pinfo2 & INSN2_WRITE_GPR_MJ)
mask |= 1 << EXTRACT_OPERAND (1, MJ, *ip);
case M_MOVEP:
gas_assert (mips_opts.micromips);
gas_assert (mips_opts.insn32);
- dreg = micromips_to_32_reg_h_map[EXTRACT_OPERAND (1, MH, *ip)];
- breg = micromips_to_32_reg_i_map[EXTRACT_OPERAND (1, MI, *ip)];
+ dreg = micromips_to_32_reg_h_map1[EXTRACT_OPERAND (1, MH, *ip)];
+ breg = micromips_to_32_reg_h_map2[EXTRACT_OPERAND (1, MH, *ip)];
sreg = micromips_to_32_reg_m_map[EXTRACT_OPERAND (1, MM, *ip)];
treg = micromips_to_32_reg_n_map[EXTRACT_OPERAND (1, MN, *ip)];
move_register (dreg, sreg);
case 'f': USE_BITS (MF); break;
case 'g': USE_BITS (MG); break;
case 'h': USE_BITS (MH); break;
- case 'i': USE_BITS (MI); break;
case 'j': USE_BITS (MJ); break;
case 'l': USE_BITS (ML); break;
case 'm': USE_BITS (MM); break;
char c = 0;
struct mips_opcode *insn;
char *argsStart;
- unsigned int regno;
+ unsigned int regno, regno2;
unsigned int lastregno;
unsigned int destregno = 0;
unsigned int lastpos = 0;
case 'f':
case 'g':
case 'h':
- case 'i':
case 'j':
case 'l':
case 'm':
break;
case 'h':
- regno = mips32_to_micromips_reg_h_map[regno];
- break;
-
- case 'i':
- switch (EXTRACT_OPERAND (1, MI, *ip))
+ s += strspn (s, " \t");
+ if (*s != ',')
{
- case 4:
- if (regno == 21)
- regno = 3;
- else if (regno == 22)
- regno = 4;
- else if (regno == 5)
- regno = 5;
- else if (regno == 6)
- regno = 6;
- else if (regno == 7)
- regno = 7;
- else
- regno = ILLEGAL_REG;
- break;
-
- case 5:
- if (regno == 6)
- regno = 0;
- else if (regno == 7)
- regno = 1;
- else
- regno = ILLEGAL_REG;
- break;
-
- case 6:
- if (regno == 7)
- regno = 2;
- else
- regno = ILLEGAL_REG;
- break;
-
- default:
- regno = ILLEGAL_REG;
- break;
+ regno = ILLEGAL_REG;
+ break;
}
+ ++s;
+ s += strspn (s, " \t");
+ ok = reg_lookup (&s, RTYPE_NUM | RTYPE_GP, ®no2);
+ if (!ok)
+ {
+ regno = ILLEGAL_REG;
+ break;
+ }
+ if (regno2 == AT && mips_opts.at)
+ {
+ if (mips_opts.at == ATREG)
+ as_warn (_("Used $at without \".set noat\""));
+ else
+ as_warn (_("Used $%u with \".set at=$%u\""),
+ regno2, mips_opts.at);
+ }
+ regno = (mips_lookup_reg_pair
+ (regno, regno2,
+ micromips_to_32_reg_h_map1,
+ micromips_to_32_reg_h_map2, 8));
break;
case 'l':
INSERT_OPERAND (1, MH, *ip, regno);
break;
- case 'i':
- INSERT_OPERAND (1, MI, *ip, regno);
- break;
-
case 'j':
INSERT_OPERAND (1, MJ, *ip, regno);
break;
+2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * mips.h: Remove "mi" documentation. Update "mh" documentation.
+ (OP_MASK_MI, OP_SH_MI, MICROMIPSOP_MASK_MI, MICROMIPSOP_MASK_MI):
+ Delete.
+ (INSN2_WRITE_GPR_MHI): Rename to...
+ (INSN2_WRITE_GPR_MH): ...this.
+
2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
* mips.h: Remove documentation of "+D" and "+T".
#define OP_SH_MG 0
#define OP_MASK_MH 0
#define OP_SH_MH 0
-#define OP_MASK_MI 0
-#define OP_SH_MI 0
#define OP_MASK_MJ 0
#define OP_SH_MJ 0
#define OP_MASK_ML 0
#define INSN2_UNCOND_BRANCH 0x10000000
/* Is a conditional branch insn. */
#define INSN2_COND_BRANCH 0x20000000
-/* Modifies the general purpose registers in MICROMIPSOP_*_MH/I. */
-#define INSN2_WRITE_GPR_MHI 0x40000000
+/* Modifies the general purpose registers in MICROMIPSOP_*_MH. */
+#define INSN2_WRITE_GPR_MH 0x40000000
/* Reads the general purpose registers in MICROMIPSOP_*_MM/N. */
#define INSN2_READ_GPR_MMN 0x80000000
#define MICROMIPSOP_SH_MG 0
#define MICROMIPSOP_MASK_MH 0x7
#define MICROMIPSOP_SH_MH 7
-#define MICROMIPSOP_MASK_MI 0x7
-#define MICROMIPSOP_SH_MI 7
#define MICROMIPSOP_MASK_MJ 0x1f
#define MICROMIPSOP_SH_MJ 0
#define MICROMIPSOP_MASK_ML 0x7
The same register used as both source and target.
"mf" 3-bit MIPS registers 2-7, 16, 17 (MICROMIPSOP_*_MF) at bit 3
"mg" 3-bit MIPS registers 2-7, 16, 17 (MICROMIPSOP_*_MG) at bit 0
- "mh" MIPS registers 4, 5, 6 (MICROMIPSOP_*_MH) at bit 7
- "mi" MIPS registers 5, 6, 7, 21, 22 (MICROMIPSOP_*_MI) at bit 7
- ("mh" and "mi" form a valid 3-bit register pair)
+ "mh" 3-bit MIPS register pair (MICROMIPSOP_*_MH) at bit 7
"mj" 5-bit MIPS registers (MICROMIPSOP_*_MJ) at bit 0
"ml" 3-bit MIPS registers 2-7, 16, 17 (MICROMIPSOP_*_ML) at bit 4
"mm" 3-bit MIPS registers 0, 2, 3, 16-20 (MICROMIPSOP_*_MM) at bit 1
+2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * micromips-opc.c (WR_mhi): Rename to..
+ (WR_mh): ...this.
+ (micromips_opcodes): Update "movep" entry accordingly. Replace
+ "mh,mi" with "mh".
+ * mips-dis.c (micromips_to_32_reg_h_map): Rename to...
+ (micromips_to_32_reg_h_map1): ...this.
+ (micromips_to_32_reg_i_map): Rename to...
+ (micromips_to_32_reg_h_map2): ...this.
+ (print_micromips_insn): Remove "mi" case. Print both registers
+ in the pair for "mh".
+
2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
* mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries.
#define RD_mf INSN2_MOD_GPR_MF
#define WR_mf INSN2_MOD_GPR_MF
#define RD_mg INSN2_READ_GPR_MG
-#define WR_mhi INSN2_WRITE_GPR_MHI
+#define WR_mh INSN2_WRITE_GPR_MH
#define RD_mj INSN2_READ_GPR_MJ
#define WR_mj INSN2_WRITE_GPR_MJ
#define RD_ml RD_mc /* Reuse, since the bit position is the same. */
{"mov.d", "T,S", 0x5400207b, 0xfc00ffff, WR_T|RD_S|FP_D, 0, I1 },
{"mov.s", "T,S", 0x5400007b, 0xfc00ffff, WR_T|RD_S|FP_S, 0, I1 },
{"mov.ps", "T,S", 0x5400407b, 0xfc00ffff, WR_T|RD_S|FP_D, 0, I1 },
-{"movep", "mh,mi,mm,mn", 0x8400, 0xfc01, NODS, WR_mhi|RD_mmn, I1 },
+{"movep", "mh,mm,mn", 0x8400, 0xfc01, NODS, WR_mh|RD_mmn, I1 },
/* This macro is after the real instruction so that it only matches with
-minsn32. */
-{"movep", "mh,mi,mm,mn", 0, (int) M_MOVEP, INSN_MACRO, 0, I1 },
+{"movep", "mh,mm,mn", 0, (int) M_MOVEP, INSN_MACRO, 0, I1 },
{"movf", "t,s,M", 0x5400017b, 0xfc001fff, WR_t|RD_s|RD_CC|FP_S|FP_D, 0, I1 },
{"movf.d", "T,S,M", 0x54000220, 0xfc001fff, WR_T|RD_S|RD_CC|FP_D, 0, I1 },
{"movf.s", "T,S,M", 0x54000020, 0xfc001fff, WR_T|RD_S|RD_CC|FP_S, 0, I1 },
#define micromips_to_32_reg_g_map mips16_to_32_reg_map
/* The microMIPS registers with type h. */
-static const unsigned int micromips_to_32_reg_h_map[] =
+static const unsigned int micromips_to_32_reg_h_map1[] =
{
5, 5, 6, 4, 4, 4, 4, 4
};
-
-/* The microMIPS registers with type i. */
-static const unsigned int micromips_to_32_reg_i_map[] =
+static const unsigned int micromips_to_32_reg_h_map2[] =
{
6, 7, 7, 21, 22, 5, 6, 7
};
break;
case 'h':
- regno = micromips_to_32_reg_h_map[GET_OP (insn, MH)];
- infprintf (is, "%s", mips_gpr_names[regno]);
- break;
-
- case 'i':
- regno = micromips_to_32_reg_i_map[GET_OP (insn, MI)];
+ regno = micromips_to_32_reg_h_map1[GET_OP (insn, MH)];
infprintf (is, "%s", mips_gpr_names[regno]);
+ regno = micromips_to_32_reg_h_map2[GET_OP (insn, MH)];
+ infprintf (is, ",%s", mips_gpr_names[regno]);
break;
case 'j':
projects / binutils-gdb.git / commitdiff