configs/orangepi_rk3399: new defconfig

Add initial support for Orangepi RK3399 target with below features:

  - U-Boot 2020.07
  - Linux 5.8.2
  - Default packages from buildroot

Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: fixate U-Boot version; remove blind BR2_TARGET_UBOOT_NEEDS_PYTHON]

diff --git a/DEVELOPERS b/DEVELOPERS
index 9ea49d8a11e655e51cf98ab6d75eec03a4b51ac5..dfe44a70428f46baba02b22b5fc3c40a9e63a230 100644 (file)
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2451,10 +2451,12 @@ F:      package/powertop/
 
 N:     Suniel Mahesh <sunil@amarulasolutions.com>
 F:     board/firefly/
+F:     board/orangepi/orangepi-rk3399
 F:     board/pine64/rockpro64
 F:     board/radxa/rockpi-4
 F:     board/radxa/rockpi-n8
 F:     board/radxa/rockpi-n10
+F:     configs/orangepi_rk3399_defconfig
 F:     configs/roc_pc_rk3399_defconfig
 F:     configs/rock_pi_4_defconfig
 F:     configs/rock_pi_n8_defconfig

diff --git a/board/orangepi/orangepi-rk3399/extlinux.conf b/board/orangepi/orangepi-rk3399/extlinux.conf
new file mode 100644 (file)
index 0000000..5109625
--- /dev/null
+++ b/board/orangepi/orangepi-rk3399/extlinux.conf
@@ -0,0 +1,4 @@
+label RK3399_ROCKPRO64 linux
+  kernel /Image
+  devicetree /rk3399-orangepi.dtb
+  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait

diff --git a/board/orangepi/orangepi-rk3399/genimage.cfg b/board/orangepi/orangepi-rk3399/genimage.cfg
new file mode 100644 (file)
index 0000000..21272c2
--- /dev/null
+++ b/board/orangepi/orangepi-rk3399/genimage.cfg
@@ -0,0 +1,39 @@
+image boot.vfat {
+       vfat {
+               files = {
+                       "Image",
+                       "rk3399-orangepi.dtb",
+                       "extlinux"
+               }
+       }
+       size = 64M
+}
+
+image sdcard.img {
+
+       hdimage {
+               gpt = true
+       }
+
+       partition loader1 {
+               image = "idbloader.img"
+               offset = 32K
+       }
+
+       partition loader2 {
+               image = "u-boot.itb"
+               offset = 8M
+       }
+
+       partition boot {
+               partition-type = 0xC
+               bootable = "true"
+               image = "boot.vfat"
+               offset = 16M
+       }
+
+       partition rootfs {
+               partition-type = 0x83
+               image = "rootfs.ext4"
+       }
+}

diff --git a/board/orangepi/orangepi-rk3399/post-build.sh b/board/orangepi/orangepi-rk3399/post-build.sh
new file mode 100755 (executable)
index 0000000..ba29375
--- /dev/null
+++ b/board/orangepi/orangepi-rk3399/post-build.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf

diff --git a/board/orangepi/orangepi-rk3399/readme.txt b/board/orangepi/orangepi-rk3399/readme.txt
new file mode 100644 (file)
index 0000000..197e1fb
--- /dev/null
+++ b/board/orangepi/orangepi-rk3399/readme.txt
@@ -0,0 +1,56 @@
+Orangepi Rk3399
+================
+http://www.orangepi.org/Orange%20Pi%20RK3399/
+
+Build:
+======
+  $ make orangepi_rk3399_defconfig
+  $ make
+
+Files created in output directory
+=================================
+
+output/images
+
+├── bl31.elf
+├── boot.vfat
+├── extlinux
+├── idbloader.img
+├── Image
+├── rk3399-orangepi.dtb
+├── rootfs.ext2
+├── rootfs.ext4 -> rootfs.ext2
+├── rootfs.tar
+├── sdcard.img
+├── u-boot.bin
+└── u-boot.itb
+
+Creating bootable SD card:
+==========================
+
+Simply invoke (as root)
+
+sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
+
+Where X is your SD card device.
+
+Booting:
+========
+Orangepi-RK3399 by default boots from emmc. For SD card boot to
+happen, emmc should be empty. If emmc happens to have any bootable
+image then erase emmc so that bootrom will look for a proper image in SD.
+
+emmc can be erased once after booted into linux as shown in below link.
+
+https://wiki.amarulasolutions.com/bsp/setup/rockchip/rk3399_emmc.html
+
+Serial console:
+---------------
+
+Baudrate for this board is 1500000.
+
+Login:
+------
+Enter 'root' as login user, and the prompt is ready.
+
+https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/orangepi.html

diff --git a/configs/orangepi_rk3399_defconfig b/configs/orangepi_rk3399_defconfig
new file mode 100644 (file)
index 0000000..bcce35f
--- /dev/null
+++ b/configs/orangepi_rk3399_defconfig
@@ -0,0 +1,53 @@
+# Architecture
+BR2_aarch64=y
+BR2_cortex_a72_a53=y
+
+# Linux headers same as kernel, a 5.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_8=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.07"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi-rk3399"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.8.2"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-orangepi"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_GENERIC_HOSTNAME="orangepi-rk3399"
+BR2_TARGET_GENERIC_ISSUE="Welcome to ORANGEPI-RK3399"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-rk3399/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/orangepi-rk3399/post-build.sh"