floating_point=default
gas=default
hosts=
-#hostsubdir=
-#namesubdir=
next_prefix=
next_host=
-#next_namesubdir=
-#next_objdir=
next_site=
next_srcdir=
next_target=
next_tmpdir=
norecursion=
-#objdir=
-#objdiroption=
prefix=/usr/local
progname=
recurring=
srctrigger=
target=
targets=
-#targetsubdir=
undefinedargs=
verbose=
version="$Revision$"
# handle things that might have args following as separate words
if [ -n "${next_prefix}" ] ; then prefix=${arg} ; prefixoption="-prefix=${prefix}" ; next_prefix=
elif [ -n "${next_datadir}" ] ; then datadir=${arg} ; datadiroption="-datadir=${datadir}" ; next_datadir=
-# elif [ -n "${next_namesubdir}" ] ; then \
-# namesubdir=${arg} ; namesubdiroption="--namesubdir=${namesubdir}" ; next_namesubdir=
-# elif [ -n "${next_objdir}" ] ; then objdir=${arg} ; objdiroption="--objdir=${objdir}" ; next_objdir=
elif [ -n "${next_site}" ] ; then site=${arg} ; next_site=
elif [ -n "${next_srcdir}" ] ; then srcdir=${arg} ; next_srcdir=
elif [ -n "${next_target}" ] ; then
fatal=true
;;
-host=* | --host=* | --hos=* | --ho=*)
-# if [ -n "${hosts}" ] ; then
-# subdirs="--subdirs"
-# fi
-
if [ -z "${hosts}" ] ; then
newhosts="${hosts} `echo ${arg} | sed 's/^[-a-z]*=//'`"
hosts="${newhosts}"
fatal=yes
fi
;;
-# -namesubdir | --namesubdir | --namesubdi | --namesubd | --namesub | --namesu | --names | --name | --nam | --na)
-# next_namesubdir=yes
-# ;;
-# -namesubdir=* | --namesubdir=* | --namesubdi=* | --namesubd=* | --namesub=* | --namesu=* | --names=* | --name=* | --nam=* | --na=*)
-# namesubdir=`echo ${arg} | sed 's/^[-a-z]*=//'`
-# namesubdiroption=${arg}
-# ;;
-nfp | --nf*)
floating_point=no
;;
-norecursion | --no*)
norecursion=true
;;
-# -objdir=* | --objdir=* | --objdi=* | --objd=* | --obj=* | --ob=* | --o=*)
-# objdiroption=${arg}
-# objdir=`echo ${arg} | sed 's/^[-a-z]*=//'`
-# ;;
-# -objdir | --objdir | --objdi | --objd | --obj | --ob | --o)
-# next_objdir=yes
-# ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix=`echo ${arg} | sed 's/^[-a-z]*=//'`
prefixoption=${arg}
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
next_srcdir=yes
;;
-# -subdirs | --su*)
-# subdirs=${arg}
-# ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=*)
-# if [ -n "${targets}" ] ; then
-# subdirs="--subdirs"
-# fi
-
if [ -z "${targets}" ] ; then
newtargets="${targets} `echo ${arg} | sed 's/^[-a-z]*=//'`"
targets="${newtargets}"
fatal=true
;;
*)
-# if [ -n "${hosts}" ] ; then
-# subdirs="--subdirs"
-# fi
-
if [ -z "${undefs}" ] ; then
newundefs="${undefs} ${arg}"
undefs=${newundefs}
echo " -lang=LANG configure to build LANG. [gcc]" ;
echo " -nfp configure the compilers default to soft floating point. [hard float]" ;
echo " -norecursion configure this directory only. [recurse]" ;
-# echo " -objdir=ODIR configure in a parallel tree rooted in ODIR. [rooted in \".\"]" ;
echo " -prefix=MYDIR configure for installation of host dependent files into MYDIR. [\"/usr/local\"]" ;
echo " -rm remove this configuration. [build a configuration]" ;
echo " -site configure with site specific makefile" ;
echo " -srcdir=DIR find the sources in DIR. [\".\" or \"..\"]" ;
-# This is correctly aligned in the output, even though it isn't here.
-# echo " -subdirs configure in subdirectories. [in source directories]" ;
echo " -target=TARGET configure for TARGET. [TARGET = HOST]" ;
echo " -tmpdir=TMPDIR create temporary files in TMPDIR. [ TMPDIR = \"/tmp\" ]" ;
echo ;
echo "Where HOST and TARGET are something like \"vax\", \"sun3\", \"encore\", etc." ;
-# echo "Asking for more than one \"--target\" implies \"--subdirs\". Any other" ;
-# echo "options given will apply to all targets."
) 1>&2
if [ -r config.status ] ; then
fi
if [ -n "${removing}" ] ; then
-# if [ -n "${objdir}" ] ; then
-# echo '***' --rm not supported for --objdir. Just \"rm -rf ${objdir}\" by hand.
-# exit 1
-# fi
-
-# if [ -n "${subdirs}" ] ; then
-# if [ -d "${subdirname}" ] ; then
-# rm -rf ${hostsubdir}
-# else
-# echo Warning: no ${PWD}/${hostsubdir} to remove.
-# fi
-# else
rm -f ${Makefile} config.status ${links}
-# fi
else
-# if [ -n "${objdir}" ]; then
-# srcdir=${PWD}
-# cd ${objdir}
-# fi
-
-# if [ -n "${subdirs}" ] ; then
-# # check for existing status before allowing forced subdirs.
-# if [ -f ${Makefile} ] ; then
-# echo '***' "${Makefile} already exists in source directory. ${PWD} not configured." 1>&2
-# exit 1
-# fi
-#
-# # use a subdir common to all targets for this host iff: this is a cross AND
-# # this tool does not claim to be target dependent AND we have not been asked to name the subdir.
-# if [ ${host_alias} != ${target_alias} -a -z "${target_dependent}" -a -z "${namesubdiroption}" ]
-# then
-# if [ ! -d H-${host_alias} ] ; then mkdir H-${host_alias} ; fi
-#
-# if ${symbolic_link} ${subdirname} H-${host_alias} 2> /dev/null ; then
-# true
-# else # just give up. they lose.
-# rmdir H-${host_alias}
-# if [ ! -d ${subdirname} ] ; then mkdir ${subdirname} ; fi
-# fi
-# elif [ ! -d ${subdirname} ] ; then
-# mkdir ${subdirname}
-# fi
-#
-# cd ${subdirname}
-#
-# if [ -z "${srcdir}" ] ; then
-# srcdir=..
-# fi
-# elif [ "`echo H-*`" != "H-*" -a "`echo X-*`" != "X-*" ] ; then
-# # if not subdir builds, then make sure none exist.
-# # We might miss if there are explicitly named subdirs.
-# echo '***' "Configured subdirs exist. ${PWD} not configured." 1>&2
-# exit 1
-# else
-# true
-# fi
-
# Find the source files, if location was not specified.
if [ -z "${srcdir}" ] ; then
srcdirdefaulted=1
echo "target_vendor = ${target_vendor}" >> ${Makefile}
echo "target_os = ${target_os}" >> ${Makefile}
-# if [ -n "${subdirs}" ] ; then
-# echo "subdir = /${subdirname}" >> ${Makefile}
-# echo "unsubdir = .." >> ${Makefile}
-# else
echo "subdir =" >> ${Makefile}
echo "unsubdir = ." >> ${Makefile}
-# fi
- # echo "workdir = ${PWD}" >> ${Makefile}
echo "VPATH = ${srcdir}" >> ${Makefile}
# add "Makefile.in" (or whatever it's called)
# ${using}" > config.status
chmod a+x config.status
-# originaldir=${PWD}
-# cd ${srcdir}
fi
# If there are subdirectories, then recur.
done
fi
done # for each target
-
- # Now build a Makefile for this host.
-# if [ -n "${subdirs}" -a ! -n "${removing}" ] ; then
-# push=${PWD}
-#
-# if [ -n "${objdir}" ] ; then
-# cd ${objdir}
-# fi
-#
-# cd ${hostsubdir}
-# cat > GNUmakefile << 'E!O!F'
-## Makefile generated by configure for host ${host_alias}.
-#
-#ALL := $(shell ls -d T-*)
-#
-#%:
-# $(foreach subdir,$(ALL),$(MAKE) -C $(subdir) \$@ &&) true
-#
-#all:
-#E!O!F
-# cd ${push}
-# fi
done # for each host
### clean up.
projects / binutils-gdb.git / commitdiff