+2009-10-10 Alan Modra <amodra@bigpond.net.au>
+
+ * scripttempl/elf32cr16.sc: Revert 2009-09-28 changes.
+ * scripttempl/elf32cr16c.sc: Likewise.
+ * scripttempl/elf32crx.sc: Likewise.
+ * scripttempl/tic54xcoff.sc: Likewise.
+ * scripttempl/aix.sc: Likewise.
+ * scripttempl/avr.sc: Likewise.
+ * scripttempl/elf32msp430.sc: Likewise.
+ * scripttempl/elf32msp430_3.sc: Likewise.
+ * scripttempl/elf32sh-symbian.sc: Likewise.
+ * scripttempl/elf_chaos.sc: Likewise.
+ * scripttempl/elfi370.sc: Likewise.
+ * scripttempl/nw.sc: Likewise.
+ * scripttempl/psos.sc: Likewise.
+ * scripttempl/armbpabi.sc: Likewise.
+ * scripttempl/elf.sc: Likewise.
+ * scripttempl/elf64hppa.sc: Likewise.
+ * scripttempl/elfd10v.sc: Likewise.
+ * scripttempl/elfd30v.sc: Likewise.
+ * scripttempl/elfm68hc11.sc: Likewise.
+ * scripttempl/elfm68hc12.sc: Likewise.
+ * scripttempl/elfmicroblaze.sc: Likewise.
+ * scripttempl/elfxtensa.sc: Likewise.
+ * scripttempl/iq2000.sc: Likewise.
+ * scripttempl/mep.sc: Likewise.
+ * scripttempl/xstormy16.sc: Likewise.
+
2009-10-09 Alan Modra <amodra@bigpond.net.au>
PR ld/10749
.pad 0 : { *(.pad) }
. = 0x10000000;
- .text : {
+ .text ${RELOCATING-0} : {
${RELOCATING+PROVIDE (_text = .);}
*(.text)
*(.pr)
fi
fi
INTERP=".interp 0 : { *(.interp) }"
-PLT=".plt : { *(.plt) }"
-RODATA=".rodata : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
+PLT=".plt ${RELOCATING-0} : { *(.plt) }"
+RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
DATARELRO=".data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro*) }"
DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }"
if test -z "${NO_SMALL_DATA}"; then
- SBSS=".sbss :
+ SBSS=".sbss ${RELOCATING-0} :
{
${RELOCATING+PROVIDE (__sbss_start = .);}
${RELOCATING+PROVIDE (___sbss_start = .);}
${RELOCATING+PROVIDE (__sbss_end = .);}
${RELOCATING+PROVIDE (___sbss_end = .);}
}"
- SBSS2=".sbss2 : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
+ SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
SDATA="/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
- .sdata :
+ .sdata ${RELOCATING-0} :
{
${RELOCATING+${SDATA_START_SYMBOLS}}
*(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
}"
- SDATA2=".sdata2 : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
- REL_SDATA=".rel.sdata : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
- .rela.sdata : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
- REL_SBSS=".rel.sbss : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
- .rela.sbss : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
- REL_SDATA2=".rel.sdata2 : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
- .rela.sdata2 : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
- REL_SBSS2=".rel.sbss2 : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
- .rela.sbss2 : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
+ SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
+ REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
+ .rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
+ REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
+ .rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
+ REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
+ .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
+ REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
+ .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
else
NO_SMALL_DATA=" "
fi
test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
-CTOR=".ctors :
+CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${CTOR_START}}
/* gcc uses crtbegin.o to find the start of
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
}"
-DTOR=".dtors :
+DTOR=".dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
KEEP (*crtbegin.o(.dtors))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
}"
-STACK=" .stack ${RELOCATING+${STACK_ADDR}} :
+STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
{
${RELOCATING+_stack = .;}
*(.stack)
__DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${INPUT_FILES}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+ if gld -r is used and the intermediate file has sections starting
+ at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
+ bug. But for now assigning the zero vmas works. */}
/* ARM's proprietary toolchain generate these symbols to match the start
and end of particular sections of the image. SymbianOS uses these
EOF
cat <<EOF
- .init :
+ .init ${RELOCATING-0} :
{
${RELOCATING+${INIT_START}}
KEEP (*(.init))
${RELOCATING+${INIT_END}}
} =${NOP-0}
- .text :
+ .text ${RELOCATING-0} :
{
${RELOCATING+${TEXT_START_SYMBOLS}}
*(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
*(.gnu.warning)
${RELOCATING+${OTHER_TEXT_SECTIONS}}
} =${NOP-0}
- .fini :
+ .fini ${RELOCATING-0} :
{
${RELOCATING+${FINI_START}}
KEEP (*(.fini))
${RELOCATING+PROVIDE (Image\$\$ER_RO\$\$Limit = .);}
${WRITABLE_RODATA-${RODATA}}
- .rodata1 : { *(.rodata1) }
+ .rodata1 ${RELOCATING-0} : { *(.rodata1) }
${CREATE_SHLIB-${SDATA2}}
${CREATE_SHLIB-${SBSS2}}
segment; there is no runtime relocation applied to these
arrays. */
- .preinit_array :
+ .preinit_array ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_start = .);}}
KEEP (*(.preinit_array))
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_end = .);}}
}
- .init_array :
+ .init_array ${RELOCATING-0} :
{
/* SymbianOS uses this symbol. */
${RELOCATING+PROVIDE (SHT\$\$INIT_ARRAY\$\$Base = .);}
/* SymbianOS uses this symbol. */
${RELOCATING+PROVIDE (SHT\$\$INIT_ARRAY\$\$Limit = .);}
}
- .fini_array :
+ .fini_array ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_start = .);}}
KEEP (*(.fini_array))
${OTHER_READONLY_SECTIONS}
.eh_frame_hdr : { *(.eh_frame_hdr) }
- .eh_frame : ONLY_IF_RO { KEEP (*(.eh_frame)) }
- .gcc_except_table : ONLY_IF_RO { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
+ .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
/* Adjust the address for the data segment. We want to adjust up to
the same address within the page on the next page up. */
${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR};}}
/* Exception handling */
- .eh_frame : ONLY_IF_RW { KEEP (*(.eh_frame)) }
- .gcc_except_table : ONLY_IF_RW { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
+ .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
/* Thread Local Storage sections */
- .tdata : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
- .tbss : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
+ .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
+ .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
${RELOCATING+${CTOR}}
${RELOCATING+${DTOR}}
- .jcr : { KEEP (*(.jcr)) }
+ .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
${RELOCATING+${DATARELRO}}
${OTHER_RELRO_SECTIONS}
${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
- .data :
+ .data ${RELOCATING-0} :
{
${RELOCATING+${DATA_START_SYMBOLS}}
*(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
${CONSTRUCTING+SORT(CONSTRUCTORS)}
}
- .data1 : { *(.data1) }
+ .data1 ${RELOCATING-0} : { *(.data1) }
${WRITABLE_RODATA+${RODATA}}
${OTHER_READWRITE_SECTIONS}
${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
${RELOCATING+${OTHER_BSS_SYMBOLS}}
${SBSS}
${BSS_PLT+${PLT}}
- .bss :
+ .bss ${RELOCATING-0} :
{
*(.dynbss)
*(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
{
/* Read-only sections, merged into text segment: */
${TEXT_DYNAMIC+${DYNAMIC}}
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
-
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.text :
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
+ .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) }
+ .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) }
+
+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rel.text ${RELOCATING-0} :
{
*(.rel.text)
${RELOCATING+*(.rel.text.*)}
${RELOCATING+*(.rel.gnu.linkonce.t*)}
}
- .rela.text :
+ .rela.text ${RELOCATING-0} :
{
*(.rela.text)
${RELOCATING+*(.rela.text.*)}
${RELOCATING+*(.rela.gnu.linkonce.t*)}
}
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.rodata :
+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rel.rodata ${RELOCATING-0} :
{
*(.rel.rodata)
${RELOCATING+*(.rel.rodata.*)}
${RELOCATING+*(.rel.gnu.linkonce.r*)}
}
- .rela.rodata :
+ .rela.rodata ${RELOCATING-0} :
{
*(.rela.rodata)
${RELOCATING+*(.rela.rodata.*)}
${RELOCATING+*(.rela.gnu.linkonce.r*)}
}
- .rel.data :
+ .rel.data ${RELOCATING-0} :
{
*(.rel.data)
${RELOCATING+*(.rel.data.*)}
${RELOCATING+*(.rel.gnu.linkonce.d*)}
}
- .rela.data :
+ .rela.data ${RELOCATING-0} :
{
*(.rela.data)
${RELOCATING+*(.rela.data.*)}
${RELOCATING+*(.rela.gnu.linkonce.d*)}
}
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
+ .rel.bss ${RELOCATING-0} : { *(.rel.bss) }
+ .rela.bss ${RELOCATING-0} : { *(.rela.bss) }
+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
/* Internal text space or external memory. */
- .text :
+ .text ${RELOCATING-0} :
{
*(.vectors)
KEEP(*(.vectors))
${RELOCATING+ _etext = . ; }
} ${RELOCATING+ > text}
- .data : ${RELOCATING+AT (ADDR (.text) + SIZEOF (.text))}
+ .data ${RELOCATING-0} : ${RELOCATING+AT (ADDR (.text) + SIZEOF (.text))}
{
${RELOCATING+ PROVIDE (__data_start = .) ; }
*(.data)
${RELOCATING+ PROVIDE (__data_end = .) ; }
} ${RELOCATING+ > data}
- .bss :${RELOCATING+ AT (ADDR (.bss))}
+ .bss ${RELOCATING-0} :${RELOCATING+ AT (ADDR (.bss))}
{
${RELOCATING+ PROVIDE (__bss_start = .) ; }
*(.bss)
${RELOCATING+ __data_load_end = __data_load_start + SIZEOF(.data); }
/* Global data not cleared after reset. */
- .noinit :
+ .noinit ${RELOCATING-0}:
{
${RELOCATING+ PROVIDE (__noinit_start = .) ; }
*(.noinit*)
${RELOCATING+ PROVIDE (__heap_start = .) ; }
} ${RELOCATING+ > data}
- .eeprom :
+ .eeprom ${RELOCATING-0}:
{
*(.eeprom*)
${RELOCATING+ __eeprom_end = . ; }
DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
fi
if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then
- INITIAL_READONLY_SECTIONS=".interp : { *(.interp) }"
+ INITIAL_READONLY_SECTIONS=".interp ${RELOCATING-0} : { *(.interp) }"
fi
if test -z "$PLT"; then
- IPLT=".iplt : { *(.iplt) }"
- PLT=".plt : { *(.plt)${IREL_IN_PLT+ *(.iplt)} }
+ IPLT=".iplt ${RELOCATING-0} : { *(.iplt) }"
+ PLT=".plt ${RELOCATING-0} : { *(.plt)${IREL_IN_PLT+ *(.iplt)} }
${IREL_IN_PLT-$IPLT}"
fi
test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=yes
if test -z "$GOT"; then
if test -z "$SEPARATE_GOTPLT"; then
- GOT=".got : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }"
+ GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.igot.plt) *(.got) *(.igot) }"
else
- GOT=".got : { *(.got) *(.igot) }"
- GOTPLT=".got.plt : { *(.got.plt) *(.igot.plt) }"
+ GOT=".got ${RELOCATING-0} : { *(.got) *(.igot) }"
+ GOTPLT=".got.plt ${RELOCATING-0} : { *(.got.plt) *(.igot.plt) }"
fi
fi
-REL_IFUNC=".rel.ifunc : { *(.rel.ifunc) }"
-RELA_IFUNC=".rela.ifunc : { *(.rela.ifunc) }"
-REL_IPLT=".rel.iplt :
+REL_IFUNC=".rel.ifunc ${RELOCATING-0} : { *(.rel.ifunc) }"
+RELA_IFUNC=".rela.ifunc ${RELOCATING-0} : { *(.rela.ifunc) }"
+REL_IPLT=".rel.iplt ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rel_iplt_start = .);}}
*(.rel.iplt)
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rel_iplt_end = .);}}
}"
-RELA_IPLT=".rela.iplt :
+RELA_IPLT=".rela.iplt ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rela_iplt_start = .);}}
*(.rela.iplt)
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rela_iplt_end = .);}}
}"
-DYNAMIC=".dynamic : { *(.dynamic) }"
-RODATA=".rodata : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
+DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
+RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }"
DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }"
if test -z "${NO_SMALL_DATA}"; then
- SBSS=".sbss :
+ SBSS=".sbss ${RELOCATING-0} :
{
${RELOCATING+${SBSS_START_SYMBOLS}}
${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
*(.scommon)
${RELOCATING+${SBSS_END_SYMBOLS}}
}"
- SBSS2=".sbss2 : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
+ SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
SDATA="/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
- .sdata :
+ .sdata ${RELOCATING-0} :
{
${RELOCATING+${SDATA_START_SYMBOLS}}
${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
*(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
}"
- SDATA2=".sdata2 :
+ SDATA2=".sdata2 ${RELOCATING-0} :
{
${RELOCATING+${SDATA2_START_SYMBOLS}}
*(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*})
}"
- REL_SDATA=".rel.sdata : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
- .rela.sdata : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
- REL_SBSS=".rel.sbss : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
- .rela.sbss : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
- REL_SDATA2=".rel.sdata2 : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
- .rela.sdata2 : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
- REL_SBSS2=".rel.sbss2 : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
- .rela.sbss2 : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
+ REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
+ .rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
+ REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
+ .rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
+ REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
+ .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
+ REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
+ .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
else
NO_SMALL_DATA=" "
fi
fi
test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
test "${LARGE_SECTIONS}" = "yes" && REL_LARGE="
- .rel.ldata : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
- .rela.ldata : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
- .rel.lbss : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
- .rela.lbss : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
- .rel.lrodata : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
- .rela.lrodata : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
+ .rel.ldata ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
+ .rela.ldata ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
+ .rel.lbss ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
+ .rela.lbss ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
+ .rel.lrodata ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
+ .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
test "${LARGE_SECTIONS}" = "yes" && OTHER_BSS_SECTIONS="
${OTHER_BSS_SECTIONS}
- .lbss :
+ .lbss ${RELOCATING-0} :
{
*(.dynlbss)
*(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*})
*(LARGE_COMMON)
}"
test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS="
- .lrodata ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
+ .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
{
*(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*})
}
- .ldata ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
+ .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
{
*(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*})
${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
}"
-CTOR=".ctors :
+CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${CTOR_START}}
/* gcc uses crtbegin.o to find the start of
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
}"
-DTOR=".dtors :
+DTOR=".dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
KEEP (*crtbegin.o(.dtors))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
}"
-STACK=" .stack ${RELOCATING+${STACK_ADDR}} :
+STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
{
${RELOCATING+${USER_LABEL_PREFIX}_stack = .;}
*(.stack)
${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${INPUT_FILES}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+ if gld -r is used and the intermediate file has sections starting
+ at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
+ bug. But for now assigning the zero vmas works. */}
SECTIONS
{
test -z "${NON_ALLOC_DYN}" || TEXT_DYNAMIC=
cat > ldscripts/dyntmp.$$ <<EOF
${TEXT_DYNAMIC+${DYNAMIC}}
- .hash : { *(.hash) }
- .gnu.hash : { *(.gnu.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .gnu.hash ${RELOCATING-0} : { *(.gnu.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
+ .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
+ .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
EOF
if [ "x$COMBRELOC" = x ]; then
COMBRELOCCAT="cat > $COMBRELOC"
fi
eval $COMBRELOCCAT <<EOF
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.text : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
- .rela.text : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.rodata : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
- .rela.rodata : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
+ .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
+ .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
${OTHER_READONLY_RELOC_SECTIONS}
- .rel.data.rel.ro : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) }
- .rela.data.rel.ro : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) }
- .rel.data : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
- .rela.data : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
- .rel.tdata : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
- .rela.tdata : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
- .rel.tbss : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
- .rela.tbss : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
+ .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) }
+ .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) }
+ .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
+ .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
+ .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
+ .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
+ .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
+ .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
${OTHER_GOT_RELOC_SECTIONS}
${REL_SDATA}
${REL_SBSS}
${REL_SDATA2}
${REL_SBSS2}
- .rel.bss : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
- .rela.bss : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
+ .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
+ .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
${REL_LARGE}
${IREL_IN_PLT+$REL_IFUNC}
${IREL_IN_PLT+$RELA_IFUNC}
if [ -n "$COMBRELOC" ]; then
cat >> ldscripts/dyntmp.$$ <<EOF
- .rel.dyn :
+ .rel.dyn ${RELOCATING-0} :
{
EOF
sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$
cat >> ldscripts/dyntmp.$$ <<EOF
}
- .rela.dyn :
+ .rela.dyn ${RELOCATING-0} :
{
EOF
sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$
fi
cat >> ldscripts/dyntmp.$$ <<EOF
- .rel.plt :
+ .rel.plt ${RELOCATING-0} :
{
*(.rel.plt)
${IREL_IN_PLT+${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rel_iplt_start = .);}}}
${IREL_IN_PLT+${RELOCATING+*(.rel.iplt)}}
${IREL_IN_PLT+${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rel_iplt_end = .);}}}
}
- .rela.plt :
+ .rela.plt ${RELOCATING-0} :
{
*(.rela.plt)
${IREL_IN_PLT+${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__rela_iplt_start = .);}}}
fi
cat <<EOF
- .init :
+ .init ${RELOCATING-0} :
{
${RELOCATING+${INIT_START}}
KEEP (*(.init))
${TEXT_PLT+${PLT}}
${TINY_READONLY_SECTION}
- .text :
+ .text ${RELOCATING-0} :
{
${RELOCATING+${TEXT_START_SYMBOLS}}
${RELOCATING+*(.text.unlikely .text.*_unlikely)}
*(.gnu.warning)
${RELOCATING+${OTHER_TEXT_SECTIONS}}
} =${NOP-0}
- .fini :
+ .fini ${RELOCATING-0} :
{
${RELOCATING+${FINI_START}}
KEEP (*(.fini))
${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);}
${RELOCATING+PROVIDE (${ETEXT_NAME} = .);}
${WRITABLE_RODATA-${RODATA}}
- .rodata1 : { *(.rodata1) }
+ .rodata1 ${RELOCATING-0} : { *(.rodata1) }
${CREATE_SHLIB-${SDATA2}}
${CREATE_SHLIB-${SBSS2}}
${OTHER_READONLY_SECTIONS}
.eh_frame_hdr : { *(.eh_frame_hdr) }
- .eh_frame : ONLY_IF_RO { KEEP (*(.eh_frame)) }
- .gcc_except_table : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
+ .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
/* Adjust the address for the data segment. We want to adjust up to
the same address within the page on the next page up. */
${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
/* Exception handling */
- .eh_frame : ONLY_IF_RW { KEEP (*(.eh_frame)) }
- .gcc_except_table : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+ .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
/* Thread Local Storage sections */
- .tdata : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
- .tbss : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
+ .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
+ .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
- .preinit_array :
+ .preinit_array ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}}
KEEP (*(.preinit_array))
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}}
}
- .init_array :
+ .init_array ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}}
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array))
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}}
}
- .fini_array :
+ .fini_array ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}}
KEEP (*(.fini_array))
}
${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
- .jcr : { KEEP (*(.jcr)) }
+ .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
${RELOCATING+${DATARELRO}}
${OTHER_RELRO_SECTIONS}
${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
- .data :
+ .data ${RELOCATING-0} :
{
${RELOCATING+${DATA_START_SYMBOLS}}
*(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
${CONSTRUCTING+SORT(CONSTRUCTORS)}
}
- .data1 : { *(.data1) }
+ .data1 ${RELOCATING-0} : { *(.data1) }
${WRITABLE_RODATA+${RODATA}}
${OTHER_READWRITE_SECTIONS}
${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
${RELOCATING+${OTHER_BSS_SYMBOLS}}
${SBSS}
${BSS_PLT+${PLT}}
- .bss :
+ .bss ${RELOCATING-0} :
{
*(.dynbss)
*(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
# Linker Script for National Semiconductor's CR16-ELF32.
-test -z "$RELOCATING" && exit 0
# The next line should be uncommented if it is desired to link
# without libstart.o and directly enter main.
OUTPUT_FORMAT("${OUTPUT_FORMAT}")
OUTPUT_ARCH(${ARCH})
-ENTRY(${ENTRY})
+${RELOCATING+ENTRY(${ENTRY})}
/* Define memory regions. */
MEMORY
# Linker Script for National Semiconductor's CR16C-ELF32.
-test -z "$RELOCATING" && exit 0
test -z "$ENTRY" && ENTRY=_start
cat <<EOF
elf32 files, which were compiled with either the near data
model or the default data model. */
-ENTRY(${ENTRY})
+${RELOCATING+ENTRY(${ENTRY})}
MEMORY
{
# Linker Script for National Semiconductor's CRX-ELF32.
-test -z "$RELOCATING" && exit 0
# The next line should be uncommented if it is desired to link
# without libstart.o and directly enter main.
OUTPUT_FORMAT("${OUTPUT_FORMAT}")
OUTPUT_ARCH(${ARCH})
-ENTRY(${ENTRY})
+${RELOCATING+ENTRY(${ENTRY})}
/* Define memory regions. */
MEMORY
if test ${GOT_HEAP_MSP-0} -ne 0
then
-HEAP_SECTION_MSP430=".heap :
+HEAP_SECTION_MSP430=".heap ${RELOCATING-0} :
{
${RELOCATING+ PROVIDE (__heap_data_start = .) ; }
*(.heap*)
{
/* Read-only sections, merged into text segment. */
${TEXT_DYNAMIC+${DYNAMIC}}
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
-
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.text :
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
+ .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) }
+ .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) }
+
+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rel.text ${RELOCATING-0} :
{
*(.rel.text)
${RELOCATING+*(.rel.text.*)}
${RELOCATING+*(.rel.gnu.linkonce.t*)}
}
- .rela.text :
+ .rela.text ${RELOCATING-0} :
{
*(.rela.text)
${RELOCATING+*(.rela.text.*)}
${RELOCATING+*(.rela.gnu.linkonce.t*)}
}
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.rodata :
+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rel.rodata ${RELOCATING-0} :
{
*(.rel.rodata)
${RELOCATING+*(.rel.rodata.*)}
${RELOCATING+*(.rel.gnu.linkonce.r*)}
}
- .rela.rodata :
+ .rela.rodata ${RELOCATING-0} :
{
*(.rela.rodata)
${RELOCATING+*(.rela.rodata.*)}
${RELOCATING+*(.rela.gnu.linkonce.r*)}
}
- .rel.data :
+ .rel.data ${RELOCATING-0} :
{
*(.rel.data)
${RELOCATING+*(.rel.data.*)}
${RELOCATING+*(.rel.gnu.linkonce.d*)}
}
- .rela.data :
+ .rela.data ${RELOCATING-0} :
{
*(.rela.data)
${RELOCATING+*(.rela.data.*)}
${RELOCATING+*(.rela.gnu.linkonce.d*)}
}
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
+ .rel.bss ${RELOCATING-0} : { *(.rel.bss) }
+ .rela.bss ${RELOCATING-0} : { *(.rela.bss) }
+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
/* Internal text space. */
.text :
_etext = .;
} ${RELOCATING+ > text}
- .data : ${RELOCATING+AT (ADDR (.text) + SIZEOF (.text))}
+ .data ${RELOCATING-0} : ${RELOCATING+AT (ADDR (.text) + SIZEOF (.text))}
{
${RELOCATING+ PROVIDE (__data_start = .) ; }
${RELOCATING+. = ALIGN(2);}
} ${RELOCATING+ > data}
/* Bootloader. */
- .bootloader :
+ .bootloader ${RELOCATING-0} :
{
${RELOCATING+ PROVIDE (__boot_start = .) ; }
*(.bootloader)
} ${RELOCATING+ > bootloader}
/* Information memory. */
- .infomem :
+ .infomem ${RELOCATING-0} :
{
*(.infomem)
${RELOCATING+. = ALIGN(2);}
} ${RELOCATING+ > infomem}
/* Information memory (not loaded into MPU). */
- .infomemnobits :
+ .infomemnobits ${RELOCATING-0} :
{
*(.infomemnobits)
${RELOCATING+. = ALIGN(2);}
${RELOCATING+ _end = . ; }
} ${RELOCATING+ > data}
- .vectors :
+ .vectors ${RELOCATING-0}:
{
${RELOCATING+ PROVIDE (__vectors_start = .) ; }
*(.vectors*)
{
/* Read-only sections, merged into text segment. */
${TEXT_DYNAMIC+${DYNAMIC}}
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
-
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.text :
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
+ .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) }
+ .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) }
+
+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rel.text ${RELOCATING-0} :
{
*(.rel.text)
${RELOCATING+*(.rel.text.*)}
${RELOCATING+*(.rel.gnu.linkonce.t*)}
}
- .rela.text :
+ .rela.text ${RELOCATING-0} :
{
*(.rela.text)
${RELOCATING+*(.rela.text.*)}
${RELOCATING+*(.rela.gnu.linkonce.t*)}
}
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.rodata :
+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rel.rodata ${RELOCATING-0} :
{
*(.rel.rodata)
${RELOCATING+*(.rel.rodata.*)}
${RELOCATING+*(.rel.gnu.linkonce.r*)}
}
- .rela.rodata :
+ .rela.rodata ${RELOCATING-0} :
{
*(.rela.rodata)
${RELOCATING+*(.rela.rodata.*)}
${RELOCATING+*(.rela.gnu.linkonce.r*)}
}
- .rel.data :
+ .rel.data ${RELOCATING-0} :
{
*(.rel.data)
${RELOCATING+*(.rel.data.*)}
${RELOCATING+*(.rel.gnu.linkonce.d*)}
}
- .rela.data :
+ .rela.data ${RELOCATING-0} :
{
*(.rela.data)
${RELOCATING+*(.rela.data.*)}
${RELOCATING+*(.rela.gnu.linkonce.d*)}
}
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
+ .rel.bss ${RELOCATING-0} : { *(.rel.bss) }
+ .rela.bss ${RELOCATING-0} : { *(.rela.bss) }
+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
/* Internal text space. */
.text :
${RELOCATING+ _etext = . ; }
} ${RELOCATING+ > text}
- .data : ${RELOCATING+AT (ADDR (.text) + SIZEOF (.text))}
+ .data ${RELOCATING-0} : ${RELOCATING+AT (ADDR (.text) + SIZEOF (.text))}
{
${RELOCATING+ PROVIDE (__data_start = .) ; }
*(.data)
${RELOCATING+ _end = . ; }
} ${RELOCATING+ > data}
- .vectors :
+ .vectors ${RELOCATING-0}:
{
${RELOCATING+ PROVIDE (__vectors_start = .) ; }
*(.vectors*)
DYNAMIC=".dynamic : { *(.dynamic) } :dynamic :dyn"
RODATA=".rodata ALIGN(4) : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.directive) *(.gnu.lto_*) }"
-test -z "$GOT" && GOT=".got : { *(.got.plt) *(.got) } :dynamic :dyn"
+test -z "$GOT" && GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) } :dynamic :dyn"
CTOR=".ctors ALIGN(4) :
{
${CONSTRUCTING+${CTOR_START}}
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
} :text"
-STACK=" .stack ${RELOCATING+${STACK_ADDR}} :
+STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
{
${RELOCATING+_stack = .;}
*(.stack)
__DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${INPUT_FILES}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+ if gld -r is used and the intermediate file has sections starting
+ at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
+ bug. But for now assigning the zero vmas works. */}
PHDRS
{
/* Adjust the address for the data segment. We want to adjust up to
the same address within the page on the next page up. */
. = ALIGN(128) + (. & (128 - 1));
- .preinit_array :
+ .preinit_array ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_start = .);}}
KEEP (*(.preinit_array))
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_end = .);}}
}
- .init_array :
+ .init_array ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_start = .);}}
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array))
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_end = .);}}
}
- .fini_array :
+ .fini_array ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_start = .);}}
KEEP (*(.fini_array))
${TEXT_DYNAMIC-${DYNAMIC}}
${TEXT_DYNAMIC+${DYNAMIC}}
- .hash : { *(.hash) } :dynamic :dyn
- .dynsym : { *(.dynsym) } :dynamic :dyn
- .dynstr : { *(.dynstr) } :dynamic :dyn
+ .hash ${RELOCATING-0} : { *(.hash) } :dynamic :dyn
+ .dynsym ${RELOCATING-0} : { *(.dynsym) } :dynamic :dyn
+ .dynstr ${RELOCATING-0} : { *(.dynstr) } :dynamic :dyn
${DATA_PLT-${BSS_PLT-${PLT}}}
.got.plt : { *(.got.plt) } :dynamic :dyn
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
+ .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
+ .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
EOF
if [ "x$COMBRELOC" = x ]; then
COMBRELOCCAT=cat
COMBRELOCCAT="cat > $COMBRELOC"
fi
eval $COMBRELOCCAT <<EOF
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.text : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
- .rela.text : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.rodata : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
- .rela.rodata : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
+ .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
+ .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
${OTHER_READONLY_RELOC_SECTIONS}
- .rel.data : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
- .rela.data : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
- .rel.tdata : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
- .rela.tdata : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
- .rel.tbss : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
- .rela.tbss : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
+ .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
+ .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
+ .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
+ .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
+ .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
+ .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
${OTHER_GOT_RELOC_SECTIONS}
- .rel.bss : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
- .rela.bss : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
+ .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
+ .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
EOF
if [ -n "$COMBRELOC" ]; then
cat <<EOF
- .rel.dyn :
+ .rel.dyn ${RELOCATING-0} :
{
EOF
sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC
cat <<EOF
}
- .rela.dyn :
+ .rela.dyn ${RELOCATING-0} :
{
EOF
sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC
EOF
fi
cat <<EOF
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
${OTHER_PLT_RELOC_SECTIONS}
DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
fi
if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then
- INITIAL_READONLY_SECTIONS=".interp : { *(.interp) }"
+ INITIAL_READONLY_SECTIONS=".interp ${RELOCATING-0} : { *(.interp) }"
fi
if test -z "$PLT"; then
- PLT=".plt : { *(.plt) }"
+ PLT=".plt ${RELOCATING-0} : { *(.plt) }"
fi
test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=yes
if test -z "$GOT"; then
if test -z "$SEPARATE_GOTPLT"; then
- GOT=".got : { *(.got.plt) *(.got) }"
+ GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) }"
else
- GOT=".got : { *(.got) }"
- GOTPLT=".got.plt : { *(.got.plt) }"
+ GOT=".got ${RELOCATING-0} : { *(.got) }"
+ GOTPLT=".got.plt ${RELOCATING-0} : { *(.got.plt) }"
fi
fi
-DYNAMIC=".dynamic : { *(.dynamic) }"
-RODATA=".rodata : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
+DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
+RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }"
DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }"
if test -z "${NO_SMALL_DATA}"; then
- SBSS=".sbss :
+ SBSS=".sbss ${RELOCATING-0} :
{
${RELOCATING+${SBSS_START_SYMBOLS}}
${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
*(.scommon)
${RELOCATING+${SBSS_END_SYMBOLS}}
}"
- SBSS2=".sbss2 : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
+ SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
SDATA="/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
- .sdata :
+ .sdata ${RELOCATING-0} :
{
${RELOCATING+${SDATA_START_SYMBOLS}}
${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
*(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
}"
- SDATA2=".sdata2 :
+ SDATA2=".sdata2 ${RELOCATING-0} :
{
${RELOCATING+${SDATA2_START_SYMBOLS}}
*(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*})
}"
- REL_SDATA=".rel.sdata : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
- .rela.sdata : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
- REL_SBSS=".rel.sbss : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
- .rela.sbss : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
- REL_SDATA2=".rel.sdata2 : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
- .rela.sdata2 : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
- REL_SBSS2=".rel.sbss2 : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
- .rela.sbss2 : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
+ REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
+ .rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
+ REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
+ .rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
+ REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
+ .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
+ REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
+ .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
else
NO_SMALL_DATA=" "
fi
fi
test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
test "${LARGE_SECTIONS}" = "yes" && REL_LARGE="
- .rel.ldata : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
- .rela.ldata : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
- .rel.lbss : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
- .rela.lbss : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
- .rel.lrodata : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
- .rela.lrodata : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
+ .rel.ldata ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
+ .rela.ldata ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
+ .rel.lbss ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
+ .rela.lbss ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
+ .rel.lrodata ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
+ .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
test "${LARGE_SECTIONS}" = "yes" && OTHER_BSS_SECTIONS="
${OTHER_BSS_SECTIONS}
- .lbss :
+ .lbss ${RELOCATING-0} :
{
*(.dynlbss)
*(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*})
*(LARGE_COMMON)
}"
test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS="
- .lrodata ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
+ .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
{
*(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*})
}
- .ldata ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
+ .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
{
*(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*})
${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
}"
-CTOR=".ctors :
+CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${CTOR_START}}
/* gcc uses crtbegin.o to find the start of
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
}"
-DTOR=".dtors :
+DTOR=".dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
KEEP (*crtbegin.o(.dtors))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
}"
-STACK=" .stack ${RELOCATING+${STACK_ADDR}} :
+STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
{
${RELOCATING+_stack = .;}
*(.stack)
${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${INPUT_FILES}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+ if gld -r is used and the intermediate file has sections starting
+ at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
+ bug. But for now assigning the zero vmas works. */}
SECTIONS
{
test -z "${NON_ALLOC_DYN}" || TEXT_DYNAMIC=
cat > ldscripts/dyntmp.$$ <<EOF
${TEXT_DYNAMIC+${DYNAMIC}}
- .hash : { *(.hash) }
- .gnu.hash : { *(.gnu.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .gnu.hash ${RELOCATING-0} : { *(.gnu.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
+ .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
+ .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
EOF
if [ "x$COMBRELOC" = x ]; then
COMBRELOCCAT="cat > $COMBRELOC"
fi
eval $COMBRELOCCAT <<EOF
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.text : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
- .rela.text : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.rodata : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
- .rela.rodata : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
+ .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
+ .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
${OTHER_READONLY_RELOC_SECTIONS}
- .rel.data.rel.ro : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) }
- .rela.data.rel.ro : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) }
- .rel.data : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
- .rela.data : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
- .rel.tdata : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
- .rela.tdata : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
- .rel.tbss : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
- .rela.tbss : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
+ .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) }
+ .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) }
+ .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
+ .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
+ .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
+ .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
+ .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
+ .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
${OTHER_GOT_RELOC_SECTIONS}
${REL_SDATA}
${REL_SBSS}
${REL_SDATA2}
${REL_SBSS2}
- .rel.bss : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
- .rela.bss : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
+ .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
+ .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
${REL_LARGE}
EOF
if [ -n "$COMBRELOC" ]; then
cat >> ldscripts/dyntmp.$$ <<EOF
- .rel.dyn :
+ .rel.dyn ${RELOCATING-0} :
{
EOF
sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$
cat >> ldscripts/dyntmp.$$ <<EOF
}
- .rel.ifunc.dyn :
+ .rel.ifunc.dyn ${RELOCATING-0} :
{
*(.rel.ifunc.*)
}
- .rela.dyn :
+ .rela.dyn ${RELOCATING-0} :
{
EOF
sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$
cat >> ldscripts/dyntmp.$$ <<EOF
}
- .rela.ifunc.dyn :
+ .rela.ifunc.dyn ${RELOCATING-0} :
{
*(.rela.ifunc.*)
}
fi
cat >> ldscripts/dyntmp.$$ <<EOF
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
${OTHER_PLT_RELOC_SECTIONS}
EOF
fi
cat <<EOF
- .init :
+ .init ${RELOCATING-0} :
{
${RELOCATING+${INIT_START}}
KEEP (*(.init))
${TEXT_PLT+${PLT}}
${TINY_READONLY_SECTION}
- .text :
+ .text ${RELOCATING-0} :
{
${RELOCATING+${TEXT_START_SYMBOLS}}
*(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
*(.gnu.warning)
${RELOCATING+${OTHER_TEXT_SECTIONS}}
} =${NOP-0}
- .fini :
+ .fini ${RELOCATING-0} :
{
${RELOCATING+${FINI_START}}
KEEP (*(.fini))
${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);}
${RELOCATING+PROVIDE (${ETEXT_NAME} = .);}
${WRITABLE_RODATA-${RODATA}}
- .rodata1 : { *(.rodata1) }
+ .rodata1 ${RELOCATING-0} : { *(.rodata1) }
${CREATE_SHLIB-${SDATA2}}
${CREATE_SHLIB-${SBSS2}}
${OTHER_READONLY_SECTIONS}
.eh_frame_hdr : { *(.eh_frame_hdr) }
- .eh_frame : ONLY_IF_RO { KEEP (*(.eh_frame)) }
- .gcc_except_table : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
+ .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
/* Adjust the address for the data segment. We want to adjust up to
the same address within the page on the next page up. */
${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
/* Exception handling */
- .eh_frame : ONLY_IF_RW { KEEP (*(.eh_frame)) }
- .gcc_except_table : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+ .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
/* Thread Local Storage sections */
- .tdata : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
+ .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
- .preinit_array :
+ .preinit_array ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}}
KEEP (*(.preinit_array))
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}}
}
- .init_array :
+ .init_array ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}}
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array))
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}}
}
- .fini_array :
+ .fini_array ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}}
KEEP (*(.fini_array))
}
${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
- .jcr : { KEEP (*(.jcr)) }
+ .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
${RELOCATING+${DATARELRO}}
${OTHER_RELRO_SECTIONS}
${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
- .data :
+ .data ${RELOCATING-0} :
{
${RELOCATING+${DATA_START_SYMBOLS}}
*(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
${CONSTRUCTING+SORT(CONSTRUCTORS)}
}
- .data1 : { *(.data1) }
+ .data1 ${RELOCATING-0} : { *(.data1) }
${WRITABLE_RODATA+${RODATA}}
${OTHER_READWRITE_SECTIONS}
${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
${RELOCATING+${OTHER_BSS_SYMBOLS}}
${SBSS}
${BSS_PLT+${PLT}}
- .bss :
+ .bss ${RELOCATING-0} :
{
*(.dynbss)
*(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"
test "$LD_FLAG" = "N" && DATA_ADDR=.
-INTERP=".interp : { *(.interp) }"
-PLT=".plt : { *(.plt) }"
-DYNAMIC=".dynamic : { *(.dynamic) }"
-RODATA=".rodata : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
+INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
+PLT=".plt ${RELOCATING-0} : { *(.plt) }"
+DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
+RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
if test -z "${NO_SMALL_DATA}"; then
- SBSS=".sbss :
+ SBSS=".sbss ${RELOCATING-0} :
{
${RELOCATING+PROVIDE (__sbss_start = .);}
${RELOCATING+PROVIDE (___sbss_start = .);}
${RELOCATING+PROVIDE (__sbss_end = .);}
${RELOCATING+PROVIDE (___sbss_end = .);}
}"
- SBSS2=".sbss2 : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
+ SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
SDATA="/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
- .sdata :
+ .sdata ${RELOCATING-0} :
{
${RELOCATING+${SDATA_START_SYMBOLS}}
*(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
}"
- SDATA2=".sdata2 : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
- REL_SDATA=".rel.sdata : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
- .rela.sdata : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
- REL_SBSS=".rel.sbss : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
- .rela.sbss : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
- REL_SDATA2=".rel.sdata2 : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
- .rela.sdata2 : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
- REL_SBSS2=".rel.sbss2 : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
- .rela.sbss2 : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
+ SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
+ REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
+ .rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
+ REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
+ .rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
+ REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
+ .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
+ REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
+ .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
fi
CTOR="
${CONSTRUCTING+${CTOR_START}}
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
"
-STACK=" .stack ${RELOCATING+${STACK_ADDR}} :
+STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
{
${RELOCATING+_stack = .;}
*(.stack)
__DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${INPUT_FILES}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+ if gld -r is used and the intermediate file has sections starting
+ at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
+ bug. But for now assigning the zero vmas works. */}
SECTIONS
{
${CREATE_SHLIB-${INTERP}}
${INITIAL_READONLY_SECTIONS}
${TEXT_DYNAMIC+${DYNAMIC}}
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
+ .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
+ .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
EOF
if [ "x$COMBRELOC" = x ]; then
COMBRELOCCAT="cat > $COMBRELOC"
fi
eval $COMBRELOCCAT <<EOF
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.text : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
- .rela.text : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.rodata : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
- .rela.rodata : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
+ .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
+ .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
${OTHER_READONLY_RELOC_SECTIONS}
- .rel.data : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
- .rela.data : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
+ .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
+ .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
${OTHER_GOT_RELOC_SECTIONS}
${REL_SDATA}
${REL_SBSS}
${REL_SDATA2}
${REL_SBSS2}
- .rel.bss : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
- .rela.bss : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
+ .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
+ .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
EOF
if [ -n "$COMBRELOC" ]; then
cat <<EOF
- .rel.dyn :
+ .rel.dyn ${RELOCATING-0} :
{
EOF
sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC
cat <<EOF
}
- .rela.dyn :
+ .rela.dyn ${RELOCATING-0} :
{
EOF
sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC
fi
cat <<EOF
. = ALIGN(0x1000);
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
${OTHER_PLT_RELOC_SECTIONS}
${DATA_PLT-${BSS_PLT-${PLT}}}
- .text :
+ .text ${RELOCATING-0} :
{
${RELOCATING+${TEXT_START_SYMBOLS}}
*(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
*(.gnu.warning)
${RELOCATING+${OTHER_TEXT_SECTIONS}}
} =${NOP-0}
- .fini :
+ .fini ${RELOCATING-0} :
{
${RELOCATING+${FINI_START}}
KEEP (*(.fini))
.eh_frame_hdr : { *(.eh_frame_hdr) }
. = ALIGN(0x1000);
- .data :
+ .data ${RELOCATING-0} :
{
*(.rodata .rodata.*)
*(.rodata1)
${DTOR}
KEEP (*(.jcr))
}
- .data1 : { *(.data1) }
+ .data1 ${RELOCATING-0} : { *(.data1) }
. = ALIGN(0x1000);
- .gcc_except_table : { *(.gcc_except_table) }
+ .gcc_except_table ${RELOCATING-0} : { *(.gcc_except_table) }
${WRITABLE_RODATA+${RODATA}}
${OTHER_READWRITE_SECTIONS}
${TEXT_DYNAMIC-${DYNAMIC}}
${DATA_PLT+${PLT}}
${RELOCATING+${OTHER_GOT_SYMBOLS}}
- .got : { *(.got.plt) *(.got) }
+ .got ${RELOCATING-0} : { *(.got.plt) *(.got) }
${OTHER_GOT_SECTIONS}
${CREATE_SHLIB+${SDATA2}}
${CREATE_SHLIB+${SBSS2}}
${SBSS}
${BSS_PLT+${PLT}}
. = ALIGN(0x1000);
- .bss :
+ .bss ${RELOCATING-0} :
{
*(.dynbss)
*(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
test "$LD_FLAG" = "N" && DATA_ADDR=.
-INTERP=".interp : { *(.interp) }"
-PLT=".plt : { *(.plt) }"
+INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
+PLT=".plt ${RELOCATING-0} : { *(.plt) }"
-CTOR=".ctors :
+CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${CTOR_START}}
/* gcc uses crtbegin.o to find the start of
${CONSTRUCTING+${CTOR_END}}
}"
-DTOR=" .dtors :
+DTOR=" .dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
KEEP (*crtbegin.o(.dtors))
*(.rodata.*)
} ${RELOCATING+ >DATA}
- .rodata1 : {
+ .rodata1 ${RELOCATING-0} : {
*(.rodata1)
*(.rodata1.*)
} ${RELOCATING+ >DATA}
- .data :
+ .data ${RELOCATING-0} :
{
${RELOCATING+${DATA_START_SYMBOLS}}
*(.data)
${CONSTRUCTING+CONSTRUCTORS}
} ${RELOCATING+ >DATA}
- .data1 : {
+ .data1 ${RELOCATING-0} : {
*(.data1)
*(.data1.*)
} ${RELOCATING+ >DATA}
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
- .sdata : {
+ .sdata ${RELOCATING-0} : {
*(.sdata)
*(.sdata.*)
} ${RELOCATING+ >DATA}
${RELOCATING+_edata = .;}
${RELOCATING+PROVIDE (edata = .);}
${RELOCATING+__bss_start = .;}
- .sbss : { *(.sbss) *(.scommon) } ${RELOCATING+ >DATA}
- .bss :
+ .sbss ${RELOCATING-0} : { *(.sbss) *(.scommon) } ${RELOCATING+ >DATA}
+ .bss ${RELOCATING-0} :
{
*(.dynbss)
*(.dynbss.*)
-CTOR=".ctors :
+CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+ __CTOR_LIST__ = .; }
/* gcc uses crtbegin.o to find the start of
${CONSTRUCTING+ __CTOR_END__ = .; }
} ${RELOCATING+ > ${DATA_MEMORY}}"
-DTOR=" .dtors :
+DTOR=" .dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+ __DTOR_LIST__ = .; }
KEEP (*crtbegin.o(.dtors))
{
/* Read-only sections, merged into text segment: */
${TEXT_DYNAMIC+${DYNAMIC}}
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
-
- .rel.text : { *(.rel.text) *(.rel.gnu.linkonce.t*) }
- .rela.text : { *(.rela.text) *(.rela.gnu.linkonce.t*) }
- .rel.data : { *(.rel.data) *(.rel.gnu.linkonce.d*) }
- .rela.data : { *(.rela.data) *(.rela.gnu.linkonce.d*) }
- .rel.rodata : { *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
- .rela.rodata : { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
- .rel.stext : { *(.rel.stest) }
- .rela.stext : { *(.rela.stest) }
- .rel.etext : { *(.rel.etest) }
- .rela.etext : { *(.rela.etest) }
- .rel.sdata : { *(.rel.sdata) }
- .rela.sdata : { *(.rela.sdata) }
- .rel.edata : { *(.rel.edata) }
- .rela.edata : { *(.rela.edata) }
- .rel.eit_v : { *(.rel.eit_v) }
- .rela.eit_v : { *(.rela.eit_v) }
- .rel.sbss : { *(.rel.sbss) }
- .rela.sbss : { *(.rela.sbss) }
- .rel.ebss : { *(.rel.ebss) }
- .rela.ebss : { *(.rela.ebss) }
- .rel.srodata : { *(.rel.srodata) }
- .rela.srodata : { *(.rela.srodata) }
- .rel.erodata : { *(.rel.erodata) }
- .rela.erodata : { *(.rela.erodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
-
- .init : { *(.init) } =${NOP-0}
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
+ .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) }
+ .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) }
+
+ .rel.text ${RELOCATING-0} : { *(.rel.text) *(.rel.gnu.linkonce.t*) }
+ .rela.text ${RELOCATING-0} : { *(.rela.text) *(.rela.gnu.linkonce.t*) }
+ .rel.data ${RELOCATING-0} : { *(.rel.data) *(.rel.gnu.linkonce.d*) }
+ .rela.data ${RELOCATING-0} : { *(.rela.data) *(.rela.gnu.linkonce.d*) }
+ .rel.rodata ${RELOCATING-0} : { *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
+ .rela.rodata ${RELOCATING-0} : { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
+ .rel.stext ${RELOCATING-0} : { *(.rel.stest) }
+ .rela.stext ${RELOCATING-0} : { *(.rela.stest) }
+ .rel.etext ${RELOCATING-0} : { *(.rel.etest) }
+ .rela.etext ${RELOCATING-0} : { *(.rela.etest) }
+ .rel.sdata ${RELOCATING-0} : { *(.rel.sdata) }
+ .rela.sdata ${RELOCATING-0} : { *(.rela.sdata) }
+ .rel.edata ${RELOCATING-0} : { *(.rel.edata) }
+ .rela.edata ${RELOCATING-0} : { *(.rela.edata) }
+ .rel.eit_v ${RELOCATING-0} : { *(.rel.eit_v) }
+ .rela.eit_v ${RELOCATING-0} : { *(.rela.eit_v) }
+ .rel.sbss ${RELOCATING-0} : { *(.rel.sbss) }
+ .rela.sbss ${RELOCATING-0} : { *(.rela.sbss) }
+ .rel.ebss ${RELOCATING-0} : { *(.rel.ebss) }
+ .rela.ebss ${RELOCATING-0} : { *(.rela.ebss) }
+ .rel.srodata ${RELOCATING-0} : { *(.rel.srodata) }
+ .rela.srodata ${RELOCATING-0} : { *(.rela.srodata) }
+ .rel.erodata ${RELOCATING-0} : { *(.rel.erodata) }
+ .rela.erodata ${RELOCATING-0} : { *(.rela.erodata) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rel.bss ${RELOCATING-0} : { *(.rel.bss) }
+ .rela.bss ${RELOCATING-0} : { *(.rela.bss) }
+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
+
+ .init ${RELOCATING-0} : { *(.init) } =${NOP-0}
${DATA_PLT-${PLT}}
/* Internal text space */
- .stext : { *(.stext) } ${RELOCATING+ > text}
+ .stext ${RELOCATING-0} : { *(.stext) } ${RELOCATING+ > text}
/* Internal text space or external memory */
.text :
} ${RELOCATING+ > ${TEXT_MEMORY}}
/* Internal data space */
- .srodata : { *(.srodata) } ${RELOCATING+ > data}
- .sdata : { *(.sdata) } ${RELOCATING+ > data}
+ .srodata ${RELOCATING-0} : { *(.srodata) } ${RELOCATING+ > data}
+ .sdata ${RELOCATING-0} : { *(.sdata) } ${RELOCATING+ > data}
/* Internal data space or external memory */
- .rodata : { *(.rodata) } ${RELOCATING+ > ${DATA_MEMORY}}
+ .rodata ${RELOCATING-0} : { *(.rodata) } ${RELOCATING+ > ${DATA_MEMORY}}
/* C++ exception support. */
- .eh_frame : { KEEP (*(.eh_frame)) } ${RELOCATING+ > ${DATA_MEMORY}}
- .gcc_except_table : { *(.gcc_except_table) } ${RELOCATING+ > ${DATA_MEMORY}}
+ .eh_frame ${RELOCATING-0} : { KEEP (*(.eh_frame)) } ${RELOCATING+ > ${DATA_MEMORY}}
+ .gcc_except_table ${RELOCATING-0} : { *(.gcc_except_table) } ${RELOCATING+ > ${DATA_MEMORY}}
/* Java class registration support. */
- .jcr : { KEEP (*(.jcr)) } ${RELOCATING+ >${DATA_MEMORY}}
+ .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) } ${RELOCATING+ >${DATA_MEMORY}}
${RELOCATING+${CTOR}}
${RELOCATING+${DTOR}}
- .data :
+ .data ${RELOCATING-0} :
{
*(.data)
*(.gnu.linkonce.d*)
} ${RELOCATING+ > ${DATA_MEMORY}}
/* External memory */
- .etext :
+ .etext ${RELOCATING-0} :
{
${RELOCATING+ PROVIDE (__etext_start = .) ; }
*(.etext)
${RELOCATING+ PROVIDE (__etext_end = .) ; }
} ${RELOCATING+ > emem}
- .erodata : { *(.erodata) } ${RELOCATING+ > emem}
- .edata : { *(.edata) } ${RELOCATING+ > emem}
+ .erodata ${RELOCATING-0} : { *(.erodata) } ${RELOCATING+ > emem}
+ .edata ${RELOCATING-0} : { *(.edata) } ${RELOCATING+ > emem}
- .sbss :
+ .sbss ${RELOCATING-0} :
{
${RELOCATING+ PROVIDE (__sbss_start = .) ; }
*(.sbss)
${RELOCATING+ PROVIDE (__sbss_end = .) ; }
} ${RELOCATING+ > data}
- .ebss :
+ .ebss ${RELOCATING-0} :
{
${RELOCATING+ PROVIDE (__ebss_start = .) ; }
*(.ebss)
${RELOCATING+ PROVIDE (__ebss_end = .) ; }
} ${RELOCATING+ > data}
- .bss :
+ .bss ${RELOCATING-0} :
{
${RELOCATING+ PROVIDE (__bss_start = .) ; }
*(.bss)
${RELOCATING+ _end = . ; }
} ${RELOCATING+ > ${DATA_MEMORY}}
- .eit_v :
+ .eit_v ${RELOCATING-0} :
{
${RELOCATING+ PROVIDE (__eit_start = .) ; }
*(.eit_v)
test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"
test "$LD_FLAG" = "N" && DATA_ADDR=.
-SBSS2=".sbss2 : { *(.sbss2) }"
-SDATA2=".sdata2 : { *(.sdata2) }"
-INTERP=".interp : { *(.interp) }"
-PLT=".plt : { *(.plt) }"
+SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2) }"
+SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2) }"
+INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
+PLT=".plt ${RELOCATING-0} : { *(.plt) }"
cat <<EOF
OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
"${LITTLE_OUTPUT_FORMAT}")
${RELOCATING+/* Do we need any of these for elf?
__DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+ if gld -r is used and the intermediate file has sections starting
+ at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
+ bug. But for now assigning the zero vmas works. */}
${RELOCATING+PROVIDE (__stack = 0);}
SECTIONS
${CREATE_SHLIB-${RELOCATING+. = ${TEXT_START_ADDR} + SIZEOF_HEADERS;}}
${CREATE_SHLIB+${RELOCATING+. = SIZEOF_HEADERS;}}
${CREATE_SHLIB-${INTERP}}
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
- .rela.text :
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
+ .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) }
+ .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) }
+ .rela.text ${RELOCATING-0} :
{ *(.rela.text) *(.rela.gnu.linkonce.t*) }
- .rela.data :
+ .rela.data ${RELOCATING-0} :
{ *(.rela.data) *(.rela.gnu.linkonce.d*) }
- .rela.rodata :
+ .rela.rodata ${RELOCATING-0} :
{ *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
- .rela.got : { *(.rela.got) }
- .rela.got1 : { *(.rela.got1) }
- .rela.got2 : { *(.rela.got2) }
- .rela.ctors : { *(.rela.ctors) }
- .rela.dtors : { *(.rela.dtors) }
- .rela.init : { *(.rela.init) }
- .rela.fini : { *(.rela.fini) }
- .rela.bss : { *(.rela.bss) }
- .rela.plt : { *(.rela.plt) }
- .rela.sdata : { *(.rela.sdata) }
- .rela.sbss : { *(.rela.sbss) }
- .rela.sdata2 : { *(.rela.sdata2) }
- .rela.sbss2 : { *(.rela.sbss2) }
- .text :
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
+ .rela.got1 ${RELOCATING-0} : { *(.rela.got1) }
+ .rela.got2 ${RELOCATING-0} : { *(.rela.got2) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rela.bss ${RELOCATING-0} : { *(.rela.bss) }
+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
+ .rela.sdata ${RELOCATING-0} : { *(.rela.sdata) }
+ .rela.sbss ${RELOCATING-0} : { *(.rela.sbss) }
+ .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2) }
+ .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2) }
+ .text ${RELOCATING-0} :
{
${RELOCATING+${TEXT_START_SYMBOLS}}
*(.text)
*(.gnu.warning)
*(.gnu.linkonce.t*)
} =${NOP-0}
- .init : { *(.init) } =${NOP-0}
- .fini : { *(.fini) } =${NOP-0}
- .rodata : { *(.rodata) *(.gnu.linkonce.r*) }
- .rodata1 : { *(.rodata1) }
+ .init ${RELOCATING-0} : { *(.init) } =${NOP-0}
+ .fini ${RELOCATING-0} : { *(.fini) } =${NOP-0}
+ .rodata ${RELOCATING-0} : { *(.rodata) *(.gnu.linkonce.r*) }
+ .rodata1 ${RELOCATING-0} : { *(.rodata1) }
${RELOCATING+_etext = .;}
${RELOCATING+PROVIDE (etext = .);}
${CREATE_SHLIB-${SDATA2}}
be referenced). */
${RELOCATING+. = ${DATA_ADDR- ALIGN(8) + ${MAXPAGESIZE}};}
- .data :
+ .data ${RELOCATING-0} :
{
${RELOCATING+${DATA_START_SYMBOLS}}
*(.data)
*(.gnu.linkonce.d*)
${CONSTRUCTING+CONSTRUCTORS}
}
- .data1 : { *(.data1) }
+ .data1 ${RELOCATING-0} : { *(.data1) }
${OTHER_READWRITE_SECTIONS}
- .got1 : { *(.got1) }
- .dynamic : { *(.dynamic) }
+ .got1 ${RELOCATING-0} : { *(.got1) }
+ .dynamic ${RELOCATING-0} : { *(.dynamic) }
/* Put .ctors and .dtors next to the .got2 section, so that the pointers
get relocated with -mrelocatable. Also put in the .fixup pointers.
The current compiler no longer needs this, but keep it around for 2.7.2 */
${RELOCATING+PROVIDE (_GOT2_START_ = .);}
- .got2 : { *(.got2) }
+ .got2 ${RELOCATING-0} : { *(.got2) }
${RELOCATING+PROVIDE (__CTOR_LIST__ = .);}
- .ctors : { *(.ctors) }
+ .ctors ${RELOCATING-0} : { *(.ctors) }
${RELOCATING+PROVIDE (__CTOR_END__ = .);}
${RELOCATING+PROVIDE (__DTOR_LIST__ = .);}
- .dtors : { *(.dtors) }
+ .dtors ${RELOCATING-0} : { *(.dtors) }
${RELOCATING+PROVIDE (__DTOR_END__ = .);}
${RELOCATING+PROVIDE (_FIXUP_START_ = .);}
- .fixup : { *(.fixup) }
+ .fixup ${RELOCATING-0} : { *(.fixup) }
${RELOCATING+PROVIDE (_FIXUP_END_ = .);}
${RELOCATING+PROVIDE (_GOT2_END_ = .);}
${RELOCATING+PROVIDE (_GOT_START_ = .);}
- .got : { *(.got) }
- .got.plt : { *(.got.plt) }
+ .got ${RELOCATING-0} : { *(.got) }
+ .got.plt ${RELOCATING-0} : { *(.got.plt) }
${CREATE_SHLIB+${SDATA2}}
${CREATE_SHLIB+${SBSS2}}
${RELOCATING+PROVIDE (_GOT_END_ = .);}
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
- .sdata : { *(.sdata) }
+ .sdata ${RELOCATING-0} : { *(.sdata) }
${RELOCATING+_edata = .;}
${RELOCATING+PROVIDE (edata = .);}
- .sbss :
+ .sbss ${RELOCATING-0} :
{
${RELOCATING+PROVIDE (__sbss_start = .);}
*(.sbss)
${RELOCATING+PROVIDE (__sbss_end = .);}
}
${PLT}
- .bss :
+ .bss ${RELOCATING-0} :
{
${RELOCATING+${OTHER_BSS_SYMBOLS}}
${RELOCATING+PROVIDE (__bss_start = .);}
if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
test "$LD_FLAG" = "N" && DATA_ADDR=.
-CTOR=".ctors :
+CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+ PROVIDE (__CTOR_LIST__ = .); }
${CONSTRUCTING+${CTOR_START}}
${CONSTRUCTING+ PROVIDE(__CTOR_END__ = .); }
} ${RELOCATING+ > ${TEXT_MEMORY}}"
-DTOR=" .dtors :
+DTOR=" .dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+ PROVIDE(__DTOR_LIST__ = .); }
KEEP (*(.dtors))
"
INSTALL_RELOC="
- .install0 : { *(.install0) }
- .install1 : { *(.install1) }
- .install2 : { *(.install2) }
- .install3 : { *(.install3) }
- .install4 : { *(.install4) }
+ .install0 0 : { *(.install0) }
+ .install1 0 : { *(.install1) }
+ .install2 0 : { *(.install2) }
+ .install3 0 : { *(.install3) }
+ .install4 0 : { *(.install4) }
"
FINISH_RELOC="
- .fini0 : { *(.fini0) }
- .fini1 : { *(.fini1) }
- .fini2 : { *(.fini2) }
- .fini3 : { *(.fini3) }
- .fini4 : { *(.fini4) }
+ .fini0 0 : { *(.fini0) }
+ .fini1 0 : { *(.fini1) }
+ .fini2 0 : { *(.fini2) }
+ .fini3 0 : { *(.fini3) }
+ .fini4 0 : { *(.fini4) }
"
BSS_DATA_RELOC="
- .data1 : { *(.data1) }
+ .data1 0 : { *(.data1) }
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
- .sdata : { *(.sdata) }
- .sbss : { *(.sbss) }
- .scommon : { *(.scommon) }
+ .sdata 0 : { *(.sdata) }
+ .sbss 0 : { *(.sbss) }
+ .scommon 0 : { *(.scommon) }
"
SOFT_REGS_RELOC="
- .softregs : { *(.softregs) }
+ .softregs 0 : { *(.softregs) }
"
cat <<EOF
SECTIONS
{
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
-
- .rel.text :
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
+ .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) }
+ .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) }
+
+ .rel.text ${RELOCATING-0} :
{
*(.rel.text)
${RELOCATING+*(.rel.text.*)}
${RELOCATING+*(.rel.gnu.linkonce.t.*)}
}
- .rela.text :
+ .rela.text ${RELOCATING-0} :
{
*(.rela.text)
${RELOCATING+*(.rela.text.*)}
${RELOCATING+*(.rela.gnu.linkonce.t.*)}
}
- .rel.data :
+ .rel.data ${RELOCATING-0} :
{
*(.rel.data)
${RELOCATING+*(.rel.data.*)}
${RELOCATING+*(.rel.gnu.linkonce.d.*)}
}
- .rela.data :
+ .rela.data ${RELOCATING-0} :
{
*(.rela.data)
${RELOCATING+*(.rela.data.*)}
${RELOCATING+*(.rela.gnu.linkonce.d.*)}
}
- .rel.rodata :
+ .rel.rodata ${RELOCATING-0} :
{
*(.rel.rodata)
${RELOCATING+*(.rel.rodata.*)}
${RELOCATING+*(.rel.gnu.linkonce.r.*)}
}
- .rela.rodata :
+ .rela.rodata ${RELOCATING-0} :
{
*(.rela.rodata)
${RELOCATING+*(.rela.rodata.*)}
${RELOCATING+*(.rela.gnu.linkonce.r.*)}
}
- .rel.sdata :
+ .rel.sdata ${RELOCATING-0} :
{
*(.rel.sdata)
${RELOCATING+*(.rel.sdata.*)}
${RELOCATING+*(.rel.gnu.linkonce.s.*)}
}
- .rela.sdata :
+ .rela.sdata ${RELOCATING-0} :
{
*(.rela.sdata)
${RELOCATING+*(.rela.sdata.*)}
${RELOCATING+*(.rela.gnu.linkonce.s.*)}
}
- .rel.sbss :
+ .rel.sbss ${RELOCATING-0} :
{
*(.rel.sbss)
${RELOCATING+*(.rel.sbss.*)}
${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
}
- .rela.sbss :
+ .rela.sbss ${RELOCATING-0} :
{
*(.rela.sbss)
${RELOCATING+*(.rela.sbss.*)}
${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
}
- .rel.bss :
+ .rel.bss ${RELOCATING-0} :
{
*(.rel.bss)
${RELOCATING+*(.rel.bss.*)}
${RELOCATING+*(.rel.gnu.linkonce.b.*)}
}
- .rela.bss :
+ .rela.bss ${RELOCATING-0} :
{
*(.rela.bss)
${RELOCATING+*(.rela.bss.*)}
${RELOCATING+*(.rela.gnu.linkonce.b.*)}
}
- .rel.stext : { *(.rel.stest) }
- .rela.stext : { *(.rela.stest) }
- .rel.etext : { *(.rel.etest) }
- .rela.etext : { *(.rela.etest) }
- .rel.sdata : { *(.rel.sdata) }
- .rela.sdata : { *(.rela.sdata) }
- .rel.edata : { *(.rel.edata) }
- .rela.edata : { *(.rela.edata) }
- .rel.eit_v : { *(.rel.eit_v) }
- .rela.eit_v : { *(.rela.eit_v) }
- .rel.ebss : { *(.rel.ebss) }
- .rela.ebss : { *(.rela.ebss) }
- .rel.srodata : { *(.rel.srodata) }
- .rela.srodata : { *(.rela.srodata) }
- .rel.erodata : { *(.rel.erodata) }
- .rela.erodata : { *(.rela.erodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
+ .rel.stext ${RELOCATING-0} : { *(.rel.stest) }
+ .rela.stext ${RELOCATING-0} : { *(.rela.stest) }
+ .rel.etext ${RELOCATING-0} : { *(.rel.etest) }
+ .rela.etext ${RELOCATING-0} : { *(.rela.etest) }
+ .rel.sdata ${RELOCATING-0} : { *(.rel.sdata) }
+ .rela.sdata ${RELOCATING-0} : { *(.rela.sdata) }
+ .rel.edata ${RELOCATING-0} : { *(.rel.edata) }
+ .rela.edata ${RELOCATING-0} : { *(.rela.edata) }
+ .rel.eit_v ${RELOCATING-0} : { *(.rel.eit_v) }
+ .rela.eit_v ${RELOCATING-0} : { *(.rela.eit_v) }
+ .rel.ebss ${RELOCATING-0} : { *(.rel.ebss) }
+ .rela.ebss ${RELOCATING-0} : { *(.rela.ebss) }
+ .rel.srodata ${RELOCATING-0} : { *(.rel.srodata) }
+ .rela.srodata ${RELOCATING-0} : { *(.rela.srodata) }
+ .rel.erodata ${RELOCATING-0} : { *(.rel.erodata) }
+ .rela.erodata ${RELOCATING-0} : { *(.rela.erodata) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
/* Concatenate .page0 sections. Put them in the page0 memory bank
unless we are creating a relocatable file. */
} ${RELOCATING+ > page0}
/* Start of text section. */
- .stext :
+ .stext ${RELOCATING-0} :
{
*(.stext)
} ${RELOCATING+ > ${TEXT_MEMORY}}
- .init :
+ .init ${RELOCATING-0} :
{
*(.init)
} ${RELOCATING+=${NOP-0}}
${RELOCATING-${INSTALL_RELOC}}
${RELOCATING-${FINISH_RELOC}}
- .text :
+ .text ${RELOCATING-0}:
{
/* Put startup code at beginning so that _start keeps same address. */
${RELOCATING+${STARTUP_CODE}}
} ${RELOCATING+ > ${TEXT_MEMORY}}
- .eh_frame :
+ .eh_frame ${RELOCATING-0} :
{
KEEP (*(.eh_frame))
} ${RELOCATING+ > ${TEXT_MEMORY}}
- .gcc_except_table :
+ .gcc_except_table ${RELOCATING-0} :
{
*(.gcc_except_table)
} ${RELOCATING+ > ${TEXT_MEMORY}}
- .rodata :
+ .rodata ${RELOCATING-0} :
{
*(.rodata)
${RELOCATING+*(.rodata.*)}
${RELOCATING+*(.gnu.linkonce.r*)}
} ${RELOCATING+ > ${TEXT_MEMORY}}
- .rodata1 :
+ .rodata1 ${RELOCATING-0} :
{
*(.rodata1)
} ${RELOCATING+ > ${TEXT_MEMORY}}
${RELOCATING+${CTOR}}
${RELOCATING+${DTOR}}
- .jcr :
+ .jcr ${RELOCATING-0} :
{
KEEP (*(.jcr))
} ${RELOCATING+ > ${TEXT_MEMORY}}
We construct the DATA image section in PROM at end of all these
read-only sections. The data image must be copied at init time.
Refer to GNU ld, Section 3.6.8.2 Output Section LMA. */
- .data : ${RELOCATING+AT (__data_image)}
+ .data ${RELOCATING-0} : ${RELOCATING+AT (__data_image)}
{
${RELOCATING+__data_section_start = .;}
${RELOCATING+PROVIDE (__data_section_start = .);}
${RELOCATING+${PRE_COMPUTE_DATA_SIZE}}
- /* .install :
+ /* .install ${RELOCATING-0}:
{
. = _data_image_end;
} ${RELOCATING+ > ${TEXT_MEMORY}} */
${RELOCATING-${BSS_DATA_RELOC}}
${RELOCATING-${SOFT_REGS_RELOC}}
- .bss :
+ .bss ${RELOCATING-0} :
{
${RELOCATING+__bss_start = .;}
${RELOCATING+*(.sbss)}
${RELOCATING+__bss_size = SIZEOF(.bss);}
${RELOCATING+PROVIDE (__bss_size = SIZEOF(.bss));}
- .eeprom :
+ .eeprom ${RELOCATING-0} :
{
*(.eeprom)
*(.eeprom.*)
if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
test "$LD_FLAG" = "N" && DATA_ADDR=.
-CTOR=".ctors :
+CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+ PROVIDE (__CTOR_LIST__ = .); }
${CONSTRUCTING+${CTOR_START}}
${CONSTRUCTING+ PROVIDE(__CTOR_END__ = .); }
} ${RELOCATING+ > ${TEXT_MEMORY}}"
-DTOR=" .dtors :
+DTOR=" .dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+ PROVIDE(__DTOR_LIST__ = .); }
KEEP (*(.dtors))
"
INSTALL_RELOC="
- .install0 : { *(.install0) }
- .install1 : { *(.install1) }
- .install2 : { *(.install2) }
- .install3 : { *(.install3) }
- .install4 : { *(.install4) }
+ .install0 0 : { *(.install0) }
+ .install1 0 : { *(.install1) }
+ .install2 0 : { *(.install2) }
+ .install3 0 : { *(.install3) }
+ .install4 0 : { *(.install4) }
"
FINISH_RELOC="
- .fini0 : { *(.fini0) }
- .fini1 : { *(.fini1) }
- .fini2 : { *(.fini2) }
- .fini3 : { *(.fini3) }
- .fini4 : { *(.fini4) }
+ .fini0 0 : { *(.fini0) }
+ .fini1 0 : { *(.fini1) }
+ .fini2 0 : { *(.fini2) }
+ .fini3 0 : { *(.fini3) }
+ .fini4 0 : { *(.fini4) }
"
BSS_DATA_RELOC="
- .data1 : { *(.data1) }
+ .data1 0 : { *(.data1) }
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
- .sdata : { *(.sdata) }
- .sbss : { *(.sbss) }
- .scommon : { *(.scommon) }
+ .sdata 0 : { *(.sdata) }
+ .sbss 0 : { *(.sbss) }
+ .scommon 0 : { *(.scommon) }
"
SOFT_REGS_RELOC="
- .softregs : { *(.softregs) }
+ .softregs 0 : { *(.softregs) }
"
cat <<EOF
SECTIONS
{
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
-
- .rel.text :
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
+ .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) }
+ .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) }
+
+ .rel.text ${RELOCATING-0} :
{
*(.rel.text)
${RELOCATING+*(.rel.text.*)}
${RELOCATING+*(.rel.gnu.linkonce.t.*)}
}
- .rela.text :
+ .rela.text ${RELOCATING-0} :
{
*(.rela.text)
${RELOCATING+*(.rela.text.*)}
${RELOCATING+*(.rela.gnu.linkonce.t.*)}
}
- .rel.data :
+ .rel.data ${RELOCATING-0} :
{
*(.rel.data)
${RELOCATING+*(.rel.data.*)}
${RELOCATING+*(.rel.gnu.linkonce.d.*)}
}
- .rela.data :
+ .rela.data ${RELOCATING-0} :
{
*(.rela.data)
${RELOCATING+*(.rela.data.*)}
${RELOCATING+*(.rela.gnu.linkonce.d.*)}
}
- .rel.rodata :
+ .rel.rodata ${RELOCATING-0} :
{
*(.rel.rodata)
${RELOCATING+*(.rel.rodata.*)}
${RELOCATING+*(.rel.gnu.linkonce.r.*)}
}
- .rela.rodata :
+ .rela.rodata ${RELOCATING-0} :
{
*(.rela.rodata)
${RELOCATING+*(.rela.rodata.*)}
${RELOCATING+*(.rela.gnu.linkonce.r.*)}
}
- .rel.sdata :
+ .rel.sdata ${RELOCATING-0} :
{
*(.rel.sdata)
${RELOCATING+*(.rel.sdata.*)}
${RELOCATING+*(.rel.gnu.linkonce.s.*)}
}
- .rela.sdata :
+ .rela.sdata ${RELOCATING-0} :
{
*(.rela.sdata)
${RELOCATING+*(.rela.sdata.*)}
${RELOCATING+*(.rela.gnu.linkonce.s.*)}
}
- .rel.sbss :
+ .rel.sbss ${RELOCATING-0} :
{
*(.rel.sbss)
${RELOCATING+*(.rel.sbss.*)}
${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
}
- .rela.sbss :
+ .rela.sbss ${RELOCATING-0} :
{
*(.rela.sbss)
${RELOCATING+*(.rela.sbss.*)}
${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
}
- .rel.bss :
+ .rel.bss ${RELOCATING-0} :
{
*(.rel.bss)
${RELOCATING+*(.rel.bss.*)}
${RELOCATING+*(.rel.gnu.linkonce.b.*)}
}
- .rela.bss :
+ .rela.bss ${RELOCATING-0} :
{
*(.rela.bss)
${RELOCATING+*(.rela.bss.*)}
${RELOCATING+*(.rela.gnu.linkonce.b.*)}
}
- .rel.stext : { *(.rel.stest) }
- .rela.stext : { *(.rela.stest) }
- .rel.etext : { *(.rel.etest) }
- .rela.etext : { *(.rela.etest) }
- .rel.sdata : { *(.rel.sdata) }
- .rela.sdata : { *(.rela.sdata) }
- .rel.edata : { *(.rel.edata) }
- .rela.edata : { *(.rela.edata) }
- .rel.eit_v : { *(.rel.eit_v) }
- .rela.eit_v : { *(.rela.eit_v) }
- .rel.ebss : { *(.rel.ebss) }
- .rela.ebss : { *(.rela.ebss) }
- .rel.srodata : { *(.rel.srodata) }
- .rela.srodata : { *(.rela.srodata) }
- .rel.erodata : { *(.rel.erodata) }
- .rela.erodata : { *(.rela.erodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
+ .rel.stext ${RELOCATING-0} : { *(.rel.stest) }
+ .rela.stext ${RELOCATING-0} : { *(.rela.stest) }
+ .rel.etext ${RELOCATING-0} : { *(.rel.etest) }
+ .rela.etext ${RELOCATING-0} : { *(.rela.etest) }
+ .rel.sdata ${RELOCATING-0} : { *(.rel.sdata) }
+ .rela.sdata ${RELOCATING-0} : { *(.rela.sdata) }
+ .rel.edata ${RELOCATING-0} : { *(.rel.edata) }
+ .rela.edata ${RELOCATING-0} : { *(.rela.edata) }
+ .rel.eit_v ${RELOCATING-0} : { *(.rel.eit_v) }
+ .rela.eit_v ${RELOCATING-0} : { *(.rela.eit_v) }
+ .rel.ebss ${RELOCATING-0} : { *(.rel.ebss) }
+ .rela.ebss ${RELOCATING-0} : { *(.rela.ebss) }
+ .rel.srodata ${RELOCATING-0} : { *(.rel.srodata) }
+ .rela.srodata ${RELOCATING-0} : { *(.rela.srodata) }
+ .rel.erodata ${RELOCATING-0} : { *(.rel.erodata) }
+ .rela.erodata ${RELOCATING-0} : { *(.rela.erodata) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
/* Concatenate .page0 sections. Put them in the page0 memory bank
unless we are creating a relocatable file. */
} ${RELOCATING+ > page0}
/* Start of text section. */
- .stext :
+ .stext ${RELOCATING-0} :
{
*(.stext)
} ${RELOCATING+ > ${TEXT_MEMORY}}
- .init :
+ .init ${RELOCATING-0} :
{
*(.init)
} ${RELOCATING+=${NOP-0}}
${RELOCATING-${INSTALL_RELOC}}
${RELOCATING-${FINISH_RELOC}}
- .text :
+ .text ${RELOCATING-0}:
{
/* Put startup code at beginning so that _start keeps same address. */
${RELOCATING+${STARTUP_CODE}}
${RELOCATING+. = ALIGN(2);}
} ${RELOCATING+ > ${TEXT_MEMORY} =0xa7a7a7a7}
- .eh_frame :
+ .eh_frame ${RELOCATING-0} :
{
KEEP (*(.eh_frame))
} ${RELOCATING+ > ${TEXT_MEMORY}}
- .gcc_except_table :
+ .gcc_except_table ${RELOCATING-0} :
{
*(.gcc_except_table)
} ${RELOCATING+ > ${TEXT_MEMORY}}
- .rodata :
+ .rodata ${RELOCATING-0} :
{
*(.rodata)
${RELOCATING+*(.rodata.*)}
${RELOCATING+. = ALIGN(2);}
} ${RELOCATING+ > ${TEXT_MEMORY} =0xffffffff}
- .rodata1 :
+ .rodata1 ${RELOCATING-0} :
{
*(.rodata1)
${RELOCATING+. = ALIGN(2);}
${RELOCATING+${CTOR}}
${RELOCATING+${DTOR}}
- .jcr :
+ .jcr ${RELOCATING-0} :
{
KEEP (*(.jcr))
} ${RELOCATING+ > ${TEXT_MEMORY}}
We construct the DATA image section in PROM at end of all these
read-only sections. The data image must be copied at init time.
Refer to GNU ld, Section 3.6.8.2 Output Section LMA. */
- .data : ${RELOCATING+AT (__data_image)}
+ .data ${RELOCATING-0} : ${RELOCATING+AT (__data_image)}
{
${RELOCATING+__data_section_start = .;}
${RELOCATING+PROVIDE (__data_section_start = .);}
${RELOCATING+${PRE_COMPUTE_DATA_SIZE}}
- /* .install :
+ /* .install ${RELOCATING-0}:
{
. = _data_image_end;
} ${RELOCATING+ > ${TEXT_MEMORY}} */
${RELOCATING-${BSS_DATA_RELOC}}
${RELOCATING-${SOFT_REGS_RELOC}}
- .bss :
+ .bss ${RELOCATING-0} :
{
${RELOCATING+__bss_start = .;}
${RELOCATING+*(.softregs)}
${RELOCATING+__bss_size = SIZEOF(.bss);}
${RELOCATING+PROVIDE (__bss_size = SIZEOF(.bss));}
- .eeprom :
+ .eeprom ${RELOCATING-0} :
{
*(.eeprom)
*(.eeprom.*)
#test -z "$TEXT_START_ADDR" && TEXT_START_ADDR="0x0"
-CTOR=".ctors :
+CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${CTOR_START}}
/* gcc uses crtbegin.o to find the start of
${CONSTRUCTING+${CTOR_END}}
}"
-DTOR=" .dtors :
+DTOR=" .dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
KEEP (*crtbegin.o(.dtors))
DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
fi
if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then
- INITIAL_READONLY_SECTIONS=".interp : { *(.interp) }"
+ INITIAL_READONLY_SECTIONS=".interp ${RELOCATING-0} : { *(.interp) }"
fi
if test -z "$PLT"; then
- PLT=".plt : { *(.plt) }"
+ PLT=".plt ${RELOCATING-0} : { *(.plt) }"
fi
test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=yes
if test -z "$GOT"; then
if test -z "$SEPARATE_GOTPLT"; then
- GOT=".got : { *(.got.plt) *(.got) }"
+ GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) }"
else
- GOT=".got : { *(.got) }"
- GOTPLT=".got.plt : { *(.got.plt) }"
+ GOT=".got ${RELOCATING-0} : { *(.got) }"
+ GOTPLT=".got.plt ${RELOCATING-0} : { *(.got.plt) }"
fi
fi
-DYNAMIC=".dynamic : { *(.dynamic) }"
-RODATA=".rodata : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
+DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
+RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }"
DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }"
-INIT_LIT=".init.literal : { *(.init.literal) }"
-INIT=".init : { *(.init) }"
-FINI_LIT=".fini.literal : { *(.fini.literal) }"
-FINI=".fini : { *(.fini) }"
+INIT_LIT=".init.literal 0 : { *(.init.literal) }"
+INIT=".init 0 : { *(.init) }"
+FINI_LIT=".fini.literal 0 : { *(.fini.literal) }"
+FINI=".fini 0 : { *(.fini) }"
if test -z "${NO_SMALL_DATA}"; then
- SBSS=".sbss :
+ SBSS=".sbss ${RELOCATING-0} :
{
${RELOCATING+${SBSS_START_SYMBOLS}}
${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
*(.scommon)
${RELOCATING+${SBSS_END_SYMBOLS}}
}"
- SBSS2=".sbss2 : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
+ SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
SDATA="/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
- .sdata :
+ .sdata ${RELOCATING-0} :
{
${RELOCATING+${SDATA_START_SYMBOLS}}
${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
*(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
}"
- SDATA2=".sdata2 :
+ SDATA2=".sdata2 ${RELOCATING-0} :
{
${RELOCATING+${SDATA2_START_SYMBOLS}}
*(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*})
}"
- REL_SDATA=".rel.sdata : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
- .rela.sdata : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
- REL_SBSS=".rel.sbss : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
- .rela.sbss : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
- REL_SDATA2=".rel.sdata2 : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
- .rela.sdata2 : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
- REL_SBSS2=".rel.sbss2 : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
- .rela.sbss2 : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
+ REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
+ .rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
+ REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
+ .rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
+ REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
+ .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
+ REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
+ .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
else
NO_SMALL_DATA=" "
fi
fi
test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
test "${LARGE_SECTIONS}" = "yes" && REL_LARGE="
- .rel.ldata : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
- .rela.ldata : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
- .rel.lbss : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
- .rela.lbss : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
- .rel.lrodata : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
- .rela.lrodata : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
+ .rel.ldata ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
+ .rela.ldata ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
+ .rel.lbss ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
+ .rela.lbss ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
+ .rel.lrodata ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
+ .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
test "${LARGE_SECTIONS}" = "yes" && OTHER_BSS_SECTIONS="
${OTHER_BSS_SECTIONS}
- .lbss :
+ .lbss ${RELOCATING-0} :
{
*(.dynlbss)
*(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*})
*(LARGE_COMMON)
}"
test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS="
- .lrodata ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
+ .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
{
*(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*})
}
- .ldata ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
+ .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
{
*(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*})
${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
}"
-CTOR=".ctors :
+CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${CTOR_START}}
/* gcc uses crtbegin.o to find the start of
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
}"
-DTOR=".dtors :
+DTOR=".dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
KEEP (*crtbegin.o(.dtors))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
}"
-STACK=" .stack ${RELOCATING+${STACK_ADDR}} :
+STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
{
${RELOCATING+_stack = .;}
*(.stack)
${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${INPUT_FILES}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+ if gld -r is used and the intermediate file has sections starting
+ at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
+ bug. But for now assigning the zero vmas works. */}
SECTIONS
{
test -z "${NON_ALLOC_DYN}" || TEXT_DYNAMIC=
cat > ldscripts/dyntmp.$$ <<EOF
${TEXT_DYNAMIC+${DYNAMIC}}
- .hash : { *(.hash) }
- .gnu.hash : { *(.gnu.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .gnu.hash ${RELOCATING-0} : { *(.gnu.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
+ .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
+ .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
EOF
if [ "x$COMBRELOC" = x ]; then
COMBRELOCCAT="cat > $COMBRELOC"
fi
eval $COMBRELOCCAT <<EOF
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.text : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
- .rela.text : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.rodata : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
- .rela.rodata : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
+ .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
+ .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
${OTHER_READONLY_RELOC_SECTIONS}
- .rel.data.rel.ro : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) }
- .rela.data.rel.ro : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) }
- .rel.data : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
- .rela.data : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
- .rel.tdata : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
- .rela.tdata : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
- .rel.tbss : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
- .rela.tbss : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
+ .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) }
+ .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) }
+ .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
+ .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
+ .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
+ .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
+ .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
+ .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
${OTHER_GOT_RELOC_SECTIONS}
${REL_SDATA}
${REL_SBSS}
${REL_SDATA2}
${REL_SBSS2}
- .rel.bss : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
- .rela.bss : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
+ .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
+ .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
${REL_LARGE}
EOF
if [ -n "$COMBRELOC" ]; then
cat >> ldscripts/dyntmp.$$ <<EOF
- .rel.dyn :
+ .rel.dyn ${RELOCATING-0} :
{
EOF
sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$
cat >> ldscripts/dyntmp.$$ <<EOF
}
- .rela.dyn :
+ .rela.dyn ${RELOCATING-0} :
{
EOF
sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$
fi
cat >> ldscripts/dyntmp.$$ <<EOF
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
${OTHER_PLT_RELOC_SECTIONS}
EOF
${TEXT_PLT+${PLT}}
${TINY_READONLY_SECTION}
- .text :
+ .text ${RELOCATING-0} :
{
*(.got.plt* .plt*)
${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);}
${RELOCATING+PROVIDE (${ETEXT_NAME} = .);}
${WRITABLE_RODATA-${RODATA}}
- .rodata1 : { *(.rodata1) }
+ .rodata1 ${RELOCATING-0} : { *(.rodata1) }
${CREATE_SHLIB-${SDATA2}}
${CREATE_SHLIB-${SBSS2}}
${OTHER_READONLY_SECTIONS}
.eh_frame_hdr : { *(.eh_frame_hdr) }
- .eh_frame : ONLY_IF_RO { KEEP (*(.eh_frame)) }
- .gcc_except_table : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
+ .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
/* Adjust the address for the data segment. We want to adjust up to
the same address within the page on the next page up. */
${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
/* Exception handling */
- .eh_frame : ONLY_IF_RW { KEEP (*(.eh_frame)) }
- .gcc_except_table : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+ .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
/* Thread Local Storage sections */
- .tdata : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
- .tbss : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
+ .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
+ .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
- .preinit_array :
+ .preinit_array ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}}
KEEP (*(.preinit_array))
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}}
}
- .init_array :
+ .init_array ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}}
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array))
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}}
}
- .fini_array :
+ .fini_array ${RELOCATING-0} :
{
${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}}
KEEP (*(.fini_array))
}
${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
- .jcr : { KEEP (*(.jcr)) }
+ .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
${RELOCATING+${DATARELRO}}
${OTHER_RELRO_SECTIONS}
${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
- .data :
+ .data ${RELOCATING-0} :
{
${RELOCATING+${DATA_START_SYMBOLS}}
*(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
${CONSTRUCTING+SORT(CONSTRUCTORS)}
}
- .data1 : { *(.data1) }
+ .data1 ${RELOCATING-0} : { *(.data1) }
${WRITABLE_RODATA+${RODATA}}
${OTHER_READWRITE_SECTIONS}
${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
${RELOCATING+${OTHER_BSS_SYMBOLS}}
${SBSS}
${BSS_PLT+${PLT}}
- .bss :
+ .bss ${RELOCATING-0} :
{
*(.dynbss)
*(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
test -z "${ELFSIZE}" && ELFSIZE=32
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
test "$LD_FLAG" = "N" && DATA_ADDR=.
-INTERP=".interp : { *(.interp) }"
-PLT=".plt : { *(.plt) }"
-DYNAMIC=".dynamic : { *(.dynamic) }"
-RODATA=".rodata : { *(.rodata) ${RELOCATING+*(.rodata.*)} ${RELOCATING+*(.gnu.linkonce.r.*)} }"
-SBSS2=".sbss2 : { *(.sbss2) ${RELOCATING+*(.sbss2.*)} ${RELOCATING+*(.gnu.linkonce.sb2.*)} }"
-SDATA2=".sdata2 : { *(.sdata2) ${RELOCATING+*(.sdata2.*)} ${RELOCATING+*(.gnu.linkonce.s2.*)} }"
-CTOR=".ctors :
+INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
+PLT=".plt ${RELOCATING-0} : { *(.plt) }"
+DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
+RODATA=".rodata ${RELOCATING-0} : { *(.rodata) ${RELOCATING+*(.rodata.*)} ${RELOCATING+*(.gnu.linkonce.r.*)} }"
+SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2) ${RELOCATING+*(.sbss2.*)} ${RELOCATING+*(.gnu.linkonce.sb2.*)} }"
+SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2) ${RELOCATING+*(.sdata2.*)} ${RELOCATING+*(.gnu.linkonce.s2.*)} }"
+CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${CTOR_START}}
/* gcc uses crtbegin.o to find the start of
${CONSTRUCTING+${CTOR_END}}
}"
-DTOR=" .dtors :
+DTOR=" .dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
KEEP (*crtbegin.o(.dtors))
__DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${INPUT_FILES}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+ if gld -r is used and the intermediate file has sections starting
+ at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
+ bug. But for now assigning the zero vmas works. */}
SECTIONS
{
COMBRELOCCAT="cat > $COMBRELOC"
fi
eval $COMBRELOCCAT <<EOF
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.text :
+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rel.text ${RELOCATING-0} :
{
*(.rel.text)
${RELOCATING+*(.rel.text.*)}
${RELOCATING+*(.rel.gnu.linkonce.t.*)}
}
- .rela.text :
+ .rela.text ${RELOCATING-0} :
{
*(.rela.text)
${RELOCATING+*(.rela.text.*)}
${RELOCATING+*(.rela.gnu.linkonce.t.*)}
}
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.rodata :
+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rel.rodata ${RELOCATING-0} :
{
*(.rel.rodata)
${RELOCATING+*(.rel.rodata.*)}
${RELOCATING+*(.rel.gnu.linkonce.r.*)}
}
- .rela.rodata :
+ .rela.rodata ${RELOCATING-0} :
{
*(.rela.rodata)
${RELOCATING+*(.rela.rodata.*)}
${RELOCATING+*(.rela.gnu.linkonce.r.*)}
}
${OTHER_READONLY_RELOC_SECTIONS}
- .rel.data :
+ .rel.data ${RELOCATING-0} :
{
*(.rel.data)
${RELOCATING+*(.rel.data.*)}
${RELOCATING+*(.rel.gnu.linkonce.d.*)}
}
- .rela.data :
+ .rela.data ${RELOCATING-0} :
{
*(.rela.data)
${RELOCATING+*(.rela.data.*)}
${RELOCATING+*(.rela.gnu.linkonce.d.*)}
}
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
${OTHER_GOT_RELOC_SECTIONS}
- .rel.sdata :
+ .rel.sdata ${RELOCATING-0} :
{
*(.rel.sdata)
${RELOCATING+*(.rel.sdata.*)}
${RELOCATING+*(.rel.gnu.linkonce.s.*)}
}
- .rela.sdata :
+ .rela.sdata ${RELOCATING-0} :
{
*(.rela.sdata)
${RELOCATING+*(.rela.sdata.*)}
${RELOCATING+*(.rela.gnu.linkonce.s.*)}
}
- .rel.sbss :
+ .rel.sbss ${RELOCATING-0} :
{
*(.rel.sbss)
${RELOCATING+*(.rel.sbss.*)}
${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
}
- .rela.sbss :
+ .rela.sbss ${RELOCATING-0} :
{
*(.rela.sbss)
${RELOCATING+*(.rela.sbss.*)}
${RELOCATING+*(.rela.gnu.linkonce.sb.*)}
}
- .rel.sdata2 :
+ .rel.sdata2 ${RELOCATING-0} :
{
*(.rel.sdata2)
${RELOCATING+*(.rel.sdata2.*)}
${RELOCATING+*(.rel.gnu.linkonce.s2.*)}
}
- .rela.sdata2 :
+ .rela.sdata2 ${RELOCATING-0} :
{
*(.rela.sdata2)
${RELOCATING+*(.rela.sdata2.*)}
${RELOCATING+*(.rela.gnu.linkonce.s2.*)}
}
- .rel.sbss2 :
+ .rel.sbss2 ${RELOCATING-0} :
{
*(.rel.sbss2)
${RELOCATING+*(.rel.sbss2.*)}
${RELOCATING+*(.rel.gnu.linkonce.sb2.*)}
}
- .rela.sbss2 :
+ .rela.sbss2 ${RELOCATING-0} :
{
*(.rela.sbss2)
${RELOCATING+*(.rela.sbss2.*)}
${RELOCATING+*(.rela.gnu.linkonce.sb2.*)}
}
- .rel.bss :
+ .rel.bss ${RELOCATING-0} :
{
*(.rel.bss)
${RELOCATING+*(.rel.bss.*)}
${RELOCATING+*(.rel.gnu.linkonce.b.*)}
}
- .rela.bss :
+ .rela.bss ${RELOCATING-0} :
{
*(.rela.bss)
${RELOCATING+*(.rela.bss.*)}
EOF
fi
cat <<EOF
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
${OTHER_PLT_RELOC_SECTIONS}
- .init :
+ .init ${RELOCATING-0} :
{
${RELOCATING+${INIT_START}}
KEEP (*(.init))
} =${NOP-0}
${DATA_PLT-${BSS_PLT-${PLT}}}
- .text :
+ .text ${RELOCATING-0} :
{
${RELOCATING+${TEXT_START_SYMBOLS}}
*(.text)
${RELOCATING+*(.gnu.linkonce.t.*)}
${RELOCATING+${OTHER_TEXT_SECTIONS}}
} =${NOP-0}
- .fini :
+ .fini ${RELOCATING-0} :
{
${RELOCATING+${FINI_START}}
KEEP (*(.fini))
${CREATE_SHLIB-${RELOCATING+. = ${DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}
${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}
- .data :
+ .data ${RELOCATING-0} :
{
${RELOCATING+${DATA_START_SYMBOLS}}
*(.data)
${RELOCATING+*(.gnu.linkonce.d.*)}
${CONSTRUCTING+SORT(CONSTRUCTORS)}
}
- .data1 : { *(.data1) }
- .eh_frame :
+ .data1 ${RELOCATING-0} : { *(.data1) }
+ .eh_frame ${RELOCATING-0} :
{
${RELOCATING+PROVIDE (__eh_frame_begin = .);}
*(.eh_frame)
} ${RELOCATING+}
.gcc_except_table : { *(.gcc_except_table) }
${INITIAL_READONLY_SECTIONS}
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
+ .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) }
+ .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) }
${RODATA}
- .rodata1 : { *(.rodata1) }
+ .rodata1 ${RELOCATING-0} : { *(.rodata1) }
${CREATE_SHLIB-${SDATA2}}
${CREATE_SHLIB-${SBSS2}}
${RELOCATING+${OTHER_READONLY_SECTIONS}}
.jcr : { KEEP (*(.jcr)) }
${DATA_PLT+${PLT}}
${RELOCATING+${OTHER_GOT_SYMBOLS}}
- .got : { *(.got.plt) *(.got) }
+ .got ${RELOCATING-0} : { *(.got.plt) *(.got) }
${RELOCATING+${OTHER_GOT_SECTIONS}}
${CREATE_SHLIB+${SDATA2}}
${CREATE_SHLIB+${SBSS2}}
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
- .sdata :
+ .sdata ${RELOCATING-0} :
{
${RELOCATING+${SDATA_START_SYMBOLS}}
*(.sdata)
${RELOCATING+PROVIDE (edata = .);}
${RELOCATING+__bss_start = .;}
${RELOCATING+${OTHER_BSS_SYMBOLS}}
- .sbss :
+ .sbss ${RELOCATING-0} :
{
${RELOCATING+PROVIDE (__sbss_start = .);}
${RELOCATING+PROVIDE (___sbss_start = .);}
${RELOCATING+PROVIDE (___sbss_end = .);}
}
${BSS_PLT+${PLT}}
- .bss :
+ .bss ${RELOCATING-0} :
{
*(.dynbss)
*(.bss)
DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (0, .);"
fi
fi
-INTERP=".interp : { *(.interp) }"
-PLT=".plt : { *(.plt) }"
+INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
+PLT=".plt ${RELOCATING-0} : { *(.plt) }"
if test -z "$GOT"; then
if test -z "$SEPARATE_GOTPLT"; then
- GOT=".got : { *(.got.plt) *(.got) }"
+ GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) }"
else
- GOT=".got : { *(.got) }"
+ GOT=".got ${RELOCATING-0} : { *(.got) }"
GOTPLT="${RELOCATING+${DATA_SEGMENT_RELRO_GOTPLT_END}}
- .got.plt : { *(.got.plt) }"
+ .got.plt ${RELOCATING-0} : { *(.got.plt) }"
fi
fi
-DYNAMIC=".dynamic : { *(.dynamic) }"
-RODATA=".rodata : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
+DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
+RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
DATARELRO=".data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro*) }"
DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }"
if test -z "${NO_SMALL_DATA}"; then
- SBSS=".sbss :
+ SBSS=".sbss ${RELOCATING-0} :
{
${RELOCATING+PROVIDE (__sbss_start = .);}
${RELOCATING+PROVIDE (___sbss_start = .);}
${RELOCATING+PROVIDE (__sbss_end = .);}
${RELOCATING+PROVIDE (___sbss_end = .);}
}"
- SBSS2=".sbss2 : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
+ SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
SDATA="/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
- .sdata :
+ .sdata ${RELOCATING-0} :
{
${RELOCATING+${SDATA_START_SYMBOLS}}
${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
*(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
}"
- SDATA2=".sdata2 : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
- REL_SDATA=".rel.sdata : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
- .rela.sdata : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
- REL_SBSS=".rel.sbss : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
- .rela.sbss : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
- REL_SDATA2=".rel.sdata2 : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
- .rela.sdata2 : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
- REL_SBSS2=".rel.sbss2 : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
- .rela.sbss2 : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
+ SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
+ REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
+ .rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
+ REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
+ .rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
+ REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
+ .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
+ REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
+ .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
else
NO_SMALL_DATA=" "
fi
test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
-CTOR=".ctors :
+CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${CTOR_START}}
/* gcc uses crtbegin.o to find the start of
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
}"
-DTOR=".dtors :
+DTOR=".dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
KEEP (*crtbegin*.o(.dtors))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
}"
-STACK=" .stack ${RELOCATING+${STACK_ADDR}} :
+STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
{
${RELOCATING+_stack = .;}
*(.stack)
__DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${INPUT_FILES}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+ if gld -r is used and the intermediate file has sections starting
+ at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
+ bug. But for now assigning the zero vmas works. */}
SECTIONS
{
${CREATE_SHLIB-${INTERP}}
${INITIAL_READONLY_SECTIONS}
${TEXT_DYNAMIC+${DYNAMIC}}
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .gnu.version : { *(.gnu.version) }
- .gnu.version_d : { *(.gnu.version_d) }
- .gnu.version_r : { *(.gnu.version_r) }
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
+ .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
+ .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
EOF
if [ "x$COMBRELOC" = x ]; then
COMBRELOCCAT="cat > $COMBRELOC"
fi
eval $COMBRELOCCAT <<EOF
- .rel.init : { *(.rel.init) }
- .rela.init : { *(.rela.init) }
- .rel.text : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
- .rela.text : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
- .rel.fini : { *(.rel.fini) }
- .rela.fini : { *(.rela.fini) }
- .rel.rodata : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
- .rela.rodata : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
+ .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
+ .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
${OTHER_READONLY_RELOC_SECTIONS}
- .rel.data.rel.ro : { *(.rel.data.rel.ro${RELOCATING+*}) }
- .rela.data.rel.ro : { *(.rel.data.rel.ro${RELOCATING+*}) }
- .rel.data : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
- .rela.data : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
- .rel.tdata : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
- .rela.tdata : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
- .rel.tbss : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
- .rela.tbss : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
+ .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) }
+ .rela.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) }
+ .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
+ .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
+ .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
+ .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
+ .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
+ .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
${OTHER_GOT_RELOC_SECTIONS}
${REL_SDATA}
${REL_SBSS}
${REL_SDATA2}
${REL_SBSS2}
- .rel.bss : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
- .rela.bss : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
+ .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
+ .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
EOF
if [ -n "$COMBRELOC" ]; then
cat <<EOF
- .rel.dyn :
+ .rel.dyn ${RELOCATING-0} :
{
EOF
sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC
cat <<EOF
}
- .rela.dyn :
+ .rela.dyn ${RELOCATING-0} :
{
EOF
sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC
EOF
fi
cat <<EOF
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
${OTHER_PLT_RELOC_SECTIONS}
- .init :
+ .init ${RELOCATING-0} :
{
${RELOCATING+${INIT_START}}
KEEP (*(.init))
} =${NOP-0}
${DATA_PLT-${BSS_PLT-${PLT}}}
- .text :
+ .text ${RELOCATING-0} :
{
${RELOCATING+${TEXT_START_SYMBOLS}}
*(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
*(.gnu.warning)
${RELOCATING+${OTHER_TEXT_SECTIONS}}
} =${NOP-0}
- .fini :
+ .fini ${RELOCATING-0} :
{
${RELOCATING+${FINI_START}}
KEEP (*(.fini))
${RELOCATING+PROVIDE (_etext = .);}
${RELOCATING+PROVIDE (etext = .);}
${WRITABLE_RODATA-${RODATA}}
- .rodata1 : { *(.rodata1) }
+ .rodata1 ${RELOCATING-0} : { *(.rodata1) }
${CREATE_SHLIB-${SDATA2}}
${CREATE_SHLIB-${SBSS2}}
${OTHER_READONLY_SECTIONS}
.eh_frame_hdr : { *(.eh_frame_hdr) }
- .eh_frame : ONLY_IF_RO { KEEP (*(.eh_frame)) }
- .gcc_except_table : ONLY_IF_RO { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
+ .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
/* Adjust the address for the data segment. We want to adjust up to
the same address within the page on the next page up. */
${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
/* Exception handling */
- .eh_frame : ONLY_IF_RW { KEEP (*(.eh_frame)) }
- .gcc_except_table : ONLY_IF_RW { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
+ .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
/* Thread Local Storage sections */
- .tdata : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
- .tbss : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
+ .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
+ .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
- .preinit_array : { KEEP (*(.preinit_array)) }
- .init_array : { KEEP (*(.init_array)) }
- .fini_array : { KEEP (*(.fini_array)) }
+ .preinit_array ${RELOCATING-0} : { KEEP (*(.preinit_array)) }
+ .init_array ${RELOCATING-0} : { KEEP (*(.init_array)) }
+ .fini_array ${RELOCATING-0} : { KEEP (*(.fini_array)) }
${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
- .jcr : { KEEP (*(.jcr)) }
+ .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
${RELOCATING+${DATARELRO}}
${OTHER_RELRO_SECTIONS}
${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
- .data :
+ .data ${RELOCATING-0} :
{
${RELOCATING+${DATA_START_SYMBOLS}}
*(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
${CONSTRUCTING+SORT(CONSTRUCTORS)}
}
- .data1 : { *(.data1) }
+ .data1 ${RELOCATING-0} : { *(.data1) }
${WRITABLE_RODATA+${RODATA}}
${OTHER_READWRITE_SECTIONS}
${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
${RELOCATING+${OTHER_BSS_SYMBOLS}}
${SBSS}
${BSS_PLT+${PLT}}
- .bss :
+ .bss ${RELOCATING-0} :
{
*(.dynbss)
*(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test "$LD_FLAG" = "N" && DATA_ADDR=.
-INTERP=".interp : { *(.interp) }"
-PLT=".plt : { *(.plt) }"
+INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
+PLT=".plt ${RELOCATING-0} : { *(.plt) }"
cat <<EOF
OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
"${LITTLE_OUTPUT_FORMAT}")
${RELOCATING+/* Do we need any of these for elf?
__DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
-
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+ if gld -r is used and the intermediate file has sections starting
+ at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
+ bug. But for now assigning the zero vmas works. */}
SECTIONS
{
/* Read-only sections, merged into text segment: */
${CREATE_SHLIB-${RELOCATING+. = ${TEXT_START_ADDR} + SIZEOF_HEADERS;}}
${CREATE_SHLIB+${RELOCATING+. = SIZEOF_HEADERS;}}
${CREATE_SHLIB-${INTERP}}
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) } =${NOP-0}
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .rel.text ${RELOCATING-0} : { *(.rel.text) }
+ .rela.text ${RELOCATING-0} : { *(.rela.text) }
+ .rel.data ${RELOCATING-0} : { *(.rel.data) }
+ .rela.data ${RELOCATING-0} : { *(.rela.data) }
+ .rel.rodata ${RELOCATING-0} : { *(.rel.rodata) }
+ .rela.rodata ${RELOCATING-0} : { *(.rela.rodata) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.bss ${RELOCATING-0} : { *(.rel.bss) }
+ .rela.bss ${RELOCATING-0} : { *(.rela.bss) }
+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
+ .init ${RELOCATING-0} : { *(.init) } =${NOP-0}
${DATA_PLT-${PLT}}
- .text :
+ .text ${RELOCATING-0} :
{
${RELOCATING+${TEXT_START_SYMBOLS}}
*(.text)
}
${RELOCATING+_etext = .;}
${RELOCATING+PROVIDE (etext = .);}
- .fini : { *(.fini) } =${NOP-0}
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
- .rodata : { *(.rodata) }
- .rodata1 : { *(.rodata1) }
+ .fini ${RELOCATING-0} : { *(.fini) } =${NOP-0}
+ .ctors ${RELOCATING-0} : { *(.ctors) }
+ .dtors ${RELOCATING-0} : { *(.dtors) }
+ .rodata ${RELOCATING-0} : { *(.rodata) }
+ .rodata1 ${RELOCATING-0} : { *(.rodata1) }
${OTHER_READONLY_SECTIONS}
/* Read-write section, merged into data segment: */
${RELOCATING+. = ${DATA_ADDR- ALIGN(8) + ${MAXPAGESIZE}};}
- .data :
+ .data ${RELOCATING-0} :
{
${RELOCATING+${DATA_START_SYMBOLS}}
*(.data)
${CONSTRUCTING+CONSTRUCTORS}
}
- .data1 : { *(.data1) }
+ .data1 ${RELOCATING-0} : { *(.data1) }
${OTHER_READWRITE_SECTIONS}
- .got : { *(.got.plt) *(.got) }
- .dynamic : { *(.dynamic) }
+ .got ${RELOCATING-0} : { *(.got.plt) *(.got) }
+ .dynamic ${RELOCATING-0} : { *(.dynamic) }
${DATA_PLT+${PLT}}
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
- .sdata : { *(.sdata) }
+ .sdata ${RELOCATING-0} : { *(.sdata) }
${RELOCATING+_edata = .;}
${RELOCATING+PROVIDE (edata = .);}
${RELOCATING+__bss_start = .;}
${RELOCATING+${OTHER_BSS_SYMBOLS}}
- .sbss : { *(.sbss) *(.scommon) }
- .bss :
+ .sbss ${RELOCATING-0} : { *(.sbss) *(.scommon) }
+ .bss ${RELOCATING-0} :
{
*(.dynbss)
*(.bss)
SECTIONS
{
- .text ${RELOCATING+${TEXT_START_ADDR}} : {
+ .text ${RELOCATING:-0} ${RELOCATING+${TEXT_START_ADDR}} : {
${RELOCATING+ start = DEFINED(_START) ? _START : DEFINED(_start) ? _start : .;}
${RELOCATING+ PROVIDE(__text = .);}
*(.text);
${RELOCATING+ PROVIDE(__etext = .);}
${RELOCATING+ PROVIDE(_etext = .);}
}
- .data : ${RELOCATING+ AT(ADDR(.text) + SIZEOF(.text))} {
+ .data ${RELOCATING:-0} : ${RELOCATING+ AT(ADDR(.text) + SIZEOF(.text))} {
${RELOCATING+ PROVIDE(__data = .);}
*(.data);
*(vars);
${RELOCATING+ PROVIDE(__edata = .);}
${RELOCATING+ PROVIDE(_edata = .);}
}
- .bss :
+ .bss ${RELOCATING:-0} :
{
${RELOCATING+ PROVIDE(__bss = .);}
*(.bss);
# default linker script for c54x, TI COFF(1).
# patterned after description in TI Assembler Tools PDF, SPRU102C, 7-53
-test -z "$RELOCATING" && exit 0
test -z "$ENTRY" && ENTRY=_c_int00
cat <<EOF
/*PAGE 1 : */ data (W) : ORIGIN = 0x01000080, LENGTH = 0xFF80
}
-ENTRY (${ENTRY})
+${RELOCATING+ENTRY (${ENTRY})}
SECTIONS
{
if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
test -z "${ELFSIZE}" && ELFSIZE=32
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
-CTOR=".ctors :
+CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${CTOR_START}}
/* gcc uses crtbegin.o to find the start of
${CONSTRUCTING+${CTOR_END}}
} > ROM"
-DTOR=" .dtors :
+DTOR=" .dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
KEEP (*crtbegin.o(.dtors))
${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${INPUT_FILES}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+ if gld -r is used and the intermediate file has sections starting
+ at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
+ bug. But for now assigning the zero vmas works. */}
/* There are two memory regions we care about, one from 0 through 0x7F00
that is RAM and one from 0x8000 up which is ROM. */
SECTIONS
{
- .data :
+ .data ${RELOCATING-0} :
{
${RELOCATING+__rdata = .;}
${RELOCATING+__data = .;}
${RELOCATING+PROVIDE (edata = .);}
${RELOCATING+__bss_start = .;}
${RELOCATING+${OTHER_BSS_SYMBOLS}}
- .bss :
+ .bss ${RELOCATING-0} :
{
*(.dynbss)
*(.bss)
${RELOCATING+PROVIDE (end = .);}
/* Read-only sections in ROM. */
- .int_vec : { *(.int_vec) } ${RELOCATING+> ROM}
+ .int_vec ${RELOCATING-0} : { *(.int_vec) } ${RELOCATING+> ROM}
- .rodata : { *(.rodata) ${RELOCATING+*(.rodata.*)} ${RELOCATING+*(.gnu.linkonce.r.*)} } ${RELOCATING+> ROM}
+ .rodata ${RELOCATING-0} : { *(.rodata) ${RELOCATING+*(.rodata.*)} ${RELOCATING+*(.gnu.linkonce.r.*)} } ${RELOCATING+> ROM}
${RELOCATING+${CTOR}}
${RELOCATING+${DTOR}}
.jcr : { KEEP (*(.jcr)) } ${RELOCATING+> ROM}
.gcc_except_table : { *(.gcc_except_table) } ${RELOCATING+> ROM}
.plt : { *(.plt) } ${RELOCATING+> ROM}
- .text :
+ .text ${RELOCATING-0} :
{
${RELOCATING+${TEXT_START_SYMBOLS}}
*(.text)
${RELOCATING+*(.gnu.linkonce.t.*)}
${RELOCATING+${OTHER_TEXT_SECTIONS}}
} ${RELOCATING+> ROM =${NOP-0}}
- .init :
+ .init ${RELOCATING-0} :
{
${RELOCATING+${INIT_START}}
KEEP (*(.init))
${RELOCATING+${INIT_END}}
} ${RELOCATING+> ROM =${NOP-0}}
- .fini :
+ .fini ${RELOCATING-0} :
{
${RELOCATING+${FINI_START}}
KEEP (*(.fini))
projects / binutils-gdb.git / commitdiff