self.flash_fake.pio = bus.master
self.smcreg_fake.pio = bus.master
-class VExpress_ELT(RealView):
- max_mem_size = '2GB'
- pci_cfg_base = 0xD0000000
- elba_uart = Pl011(pio_addr=0xE0009000, int_num=42)
- uart = Pl011(pio_addr=0xFF009000, int_num=121)
- realview_io = RealViewCtrl(proc_id0=0x0C000222, pio_addr=0xFF000000)
- gic = Gic(dist_addr=0xE0201000, cpu_addr=0xE0200100)
- local_cpu_timer = CpuLocalTimer(int_num_timer=29, int_num_watchdog=30, pio_addr=0xE0200600)
- v2m_timer0 = Sp804(int_num0=120, int_num1=120, pio_addr=0xFF011000)
- v2m_timer1 = Sp804(int_num0=121, int_num1=121, pio_addr=0xFF012000)
- elba_timer0 = Sp804(int_num0=36, int_num1=36, pio_addr=0xE0011000, clock0='50MHz', clock1='50MHz')
- elba_timer1 = Sp804(int_num0=37, int_num1=37, pio_addr=0xE0012000, clock0='50MHz', clock1='50MHz')
- clcd = Pl111(pio_addr=0xE0022000, int_num=46) # CLCD interrupt no. unknown
- kmi0 = Pl050(pio_addr=0xFF006000, int_num=124)
- kmi1 = Pl050(pio_addr=0xFF007000, int_num=125)
- elba_kmi0 = Pl050(pio_addr=0xE0006000, int_num=52)
- elba_kmi1 = Pl050(pio_addr=0xE0007000, int_num=53)
- a9scu = A9SCU(pio_addr=0xE0200000)
- cf_ctrl = IdeController(disks=[], pci_func=0, pci_dev=0, pci_bus=2,
- io_shift = 2, ctrl_offset = 2, Command = 0x1,
- BAR0 = 0xFF01A000, BAR0Size = '256B',
- BAR1 = 0xFF01A100, BAR1Size = '4096B',
- BAR0LegacyIO = True, BAR1LegacyIO = True)
-
- pciconfig = PciConfigAll()
- ethernet = IGbE_e1000(pci_bus=0, pci_dev=0, pci_func=0,
- InterruptLine=1, InterruptPin=1)
-
- ide = IdeController(disks = [], pci_bus=0, pci_dev=1, pci_func=0,
- InterruptLine=2, InterruptPin=2)
-
- l2x0_fake = IsaFake(pio_addr=0xE0202000, pio_size=0xfff)
- dmac_fake = AmbaFake(pio_addr=0xE0020000)
- uart1_fake = AmbaFake(pio_addr=0xE000A000)
- uart2_fake = AmbaFake(pio_addr=0xE000B000)
- uart3_fake = AmbaFake(pio_addr=0xE000C000)
- smc_fake = AmbaFake(pio_addr=0xEC000000)
- sp810_fake = AmbaFake(pio_addr=0xFF001000, ignore_access=True)
- watchdog_fake = AmbaFake(pio_addr=0xE0010000)
- aaci_fake = AmbaFake(pio_addr=0xFF004000)
- elba_aaci_fake = AmbaFake(pio_addr=0xE0004000)
- mmc_fake = AmbaFake(pio_addr=0xE0005000) # not sure if we need this
- rtc_fake = AmbaFake(pio_addr=0xE0017000, amba_id=0x41031)
- spsc_fake = IsaFake(pio_addr=0xE001B000, pio_size=0x2000)
- lan_fake = IsaFake(pio_addr=0xFA000000, pio_size=0xffff)
- usb_fake = IsaFake(pio_addr=0xFB000000, pio_size=0x1ffff)
-
-
- # Attach I/O devices that are on chip and also set the appropriate
- # ranges for the bridge
- def attachOnChipIO(self, bus, bridge):
- self.gic.pio = bus.master
- self.a9scu.pio = bus.master
- self.local_cpu_timer.pio = bus.master
- # Bridge ranges based on excluding what is part of on-chip I/O
- # (gic, a9scu)
- bridge.ranges = [AddrRange(self.pci_cfg_base, self.a9scu.pio_addr - 1),
- AddrRange(self.l2x0_fake.pio_addr, Addr.max)]
-
- # Attach I/O devices to specified bus object. Can't do this
- # earlier, since the bus object itself is typically defined at the
- # System level.
- def attachIO(self, bus):
- self.elba_uart.pio = bus.master
- self.uart.pio = bus.master
- self.realview_io.pio = bus.master
- self.v2m_timer0.pio = bus.master
- self.v2m_timer1.pio = bus.master
- self.elba_timer0.pio = bus.master
- self.elba_timer1.pio = bus.master
- self.clcd.pio = bus.master
- self.clcd.dma = bus.slave
- self.kmi0.pio = bus.master
- self.kmi1.pio = bus.master
- self.elba_kmi0.pio = bus.master
- self.elba_kmi1.pio = bus.master
- self.cf_ctrl.pio = bus.master
- self.cf_ctrl.config = bus.master
- self.cf_ctrl.dma = bus.slave
- self.ide.pio = bus.master
- self.ide.config = bus.master
- self.ide.dma = bus.slave
- self.ethernet.pio = bus.master
- self.ethernet.config = bus.master
- self.ethernet.dma = bus.slave
- self.pciconfig.pio = bus.default
- bus.use_default_range = True
-
- self.l2x0_fake.pio = bus.master
- self.dmac_fake.pio = bus.master
- self.uart1_fake.pio = bus.master
- self.uart2_fake.pio = bus.master
- self.uart3_fake.pio = bus.master
- self.smc_fake.pio = bus.master
- self.sp810_fake.pio = bus.master
- self.watchdog_fake.pio = bus.master
- self.aaci_fake.pio = bus.master
- self.elba_aaci_fake.pio = bus.master
- self.mmc_fake.pio = bus.master
- self.rtc_fake.pio = bus.master
- self.spsc_fake.pio = bus.master
- self.lan_fake.pio = bus.master
- self.usb_fake.pio = bus.master
-
-
class VExpress_EMM(RealView):
mem_start_addr = '2GB'
max_mem_size = '2GB'
+ pci_cfg_base = 0x30000000
uart = Pl011(pio_addr=0x1c090000, int_num=37)
realview_io = RealViewCtrl(proc_id0=0x14000000, proc_id1=0x14000000, pio_addr=0x1C010000)
gic = Gic(dist_addr=0x2C001000, cpu_addr=0x2C002000)
BAR0 = 0x1C1A0000, BAR0Size = '256B',
BAR1 = 0x1C1A0100, BAR1Size = '4096B',
BAR0LegacyIO = True, BAR1LegacyIO = True)
+
+ pciconfig = PciConfigAll(size='256MB')
+ ethernet = IGbE_e1000(pci_bus=0, pci_dev=0, pci_func=0,
+ InterruptLine=1, InterruptPin=1)
+
+ ide = IdeController(disks = [], pci_bus=0, pci_dev=1, pci_func=0,
+ InterruptLine=2, InterruptPin=2)
+
+
vram = SimpleMemory(range = AddrRange(0x18000000, size='32MB'),
zero = True)
rtc = PL031(pio_addr=0x1C170000, int_num=36)
self.rtc.pio = bus.master
bus.use_default_range = True
self.vram.port = bus.master
+ self.ide.pio = bus.master
+ self.ide.config = bus.master
+ self.ide.dma = bus.slave
+ self.ethernet.pio = bus.master
+ self.ethernet.config = bus.master
+ self.ethernet.dma = bus.slave
+ self.pciconfig.pio = bus.default
self.l2x0_fake.pio = bus.master
self.uart1_fake.pio = bus.master
projects / gem5.git / commitdiff