-Fri Dec 29 16:30:58 1995 Stan Shebs <shebs@andros.cygnus.com>
+Wed Jan 3 13:09:04 1996 Fred Fish <fnf@cygnus.com>
- * symfile.c (find_sym_fns): Add PowerMac to xcoff file recognition
- kludge.
+ * symmisc.c (print_objfile_statistics): Print memory use statistics
+ for objfile psymbol, symbol, and type obstacks.
+ Update copyright to 1996.
-start-sanitize-gdbtk
-Thu Dec 28 15:10:49 1995 Stan Shebs <shebs@andros.cygnus.com>
+Tue Jan 2 13:41:14 1996 Stan Shebs <shebs@andros.cygnus.com>
- * README.GDBTK: Polish introductory paragraph.
-end-sanitize-gdbtk
+ * config/mips/nm-irix5.h: Restore.
+ (TARGET_HAS_HARDWARE_WATCHPOINTS, etc): Define as for Irix 4;
+ from Lee Iverson <leei@ai.sri.com>.
+ * config/mips/irix5.mh (NAT_FILE): Use nm-irix5.h.
+ * config/mips/irix[345].mh (MUNCH_DEFINE): Remove.
-Fri Dec 22 11:05:59 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * configure.in (gdb_host): Add support for DG/UX running on x86 as
- a host.
- (all x86 targets and hosts): Add support for pentium-pro machines.
-
- * configure: Rebuild.
-
- * config/i386/i386dgux.mh: New file for DG/UX running on x86 host.
-
-Thu Dec 21 19:09:20 1995 Rob Savoye <rob@chinadoll.cygnus.com>
-
- * remote-array.c (array_wait): Poll the keyboard along with the
- serial port so users can tpye at the target while their
- application is running.
-
-Thu Dec 21 11:58:52 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * Makefile.in (ppcbug-rom.o, srec.o): Add dependencies.
-
- * monitor.c (monitor_debug): Take prefix, and suffix arguments.
- Print trailing newline after the suffix.
- (monitor_printf{,_noecho}): Change monitor_debug calls.
- (monitor_printf): Call monitor_expect instead of trying to do the
- expect processing locally so that if there is extra junk, it
- doesn't hang things up.
- (readchar): If MO_HANDLE_NL is set, handle \r\n pairs and convert
- them to a single \r. Use monitor_debug to print out byte read.
-
- * monitor.h (MO_HANDLE_NL): Add new flag.
-
- * ppcbug-rom.c (ppcbug_ops{1,2}): Split into two ops, one that
- uses lo 0 to load, and the other that uses lo 1. Set flag
- MO_HANDLE_NL.
- (ppcbug_open{0,1}): Clone and split to handle ppcbug_ops{1,2}.
- (_initialize_ppcbug_rom): Set up both ppcbug_open{0,1}.
-
-Wed Dec 20 10:54:41 1995 Fred Fish <fnf@cygnus.com>
-
- * defs.h: Delete extraneous whitespace at end of file.
- * symfile.h: Move #include of demangle.h outside conditional.
- * objfiles.h (struct objstats, OBJSTAT, OBJSTATS): New struct and
- macros to hold per-objfile statistics for internal
- instrumentation.
- (struct objfile): Add OBJSTATS member, which is optional.
- * buildsym.h (next_symbol_text_func): Now takes objfile argument.
- Also update copyright to 1995.
- * dbxread.c (dbx_next_symbol_text): Now takes objfile argument.
- (dbx_symfile_init, coffstab_build_psymtabs, elfstab_build_psymtabs,
- stabsect_build_psymtabs): Accumulate string table size.
- (dbx_next_symbol_text, read_dbx_symtab, read_ofile_symtab):
- Accumulate number of stabs symbols read.
- * dwarfread.c (new_symbol, symthesize_typedef):
- Accumulate number of full symbols created.
- * gdbtypes.c (alloc_type): Accumulate number of types.
- * maint.c (maintenance_print_statistics): New function.
- * mdebugread.c (mdebug_next_symbol_text): Now takes objfile
- argument.
- * minsyms.c (prim_record_minimal_symbol_and_info): Accumulate
- number of minimal symbols read.
- * os9kread.c (read_os9k_psymtab): next_symbol_text takes objfile
- arg.
- * partial-stab.h: next_symbol_text takes objfile arg.
- * stabsread.c (error_type, STABS_CONTINUE): Now takes objfile arg
- and uses it to call next_symbol_text.
- * symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list):
- Accumulate number of partial symbols created.
- * symfile.h (ADD_PSYMBOL_VT_TO_LIST): Accumulate number of partial
- symbols created.
- * symmisc.c (print_objfile_statistics): Print the per-objfile
- internal instrumentation statistics gathered.
- * xcoffread.c (xcoff_next_symbol_text): Now takes objfile argument.
-
-Fri Dec 15 16:15:55 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * top.c (set_endian_from_file): Use new bfd_big_endian macro.
-
-Fri Dec 15 12:21:10 1995 Raymond Jou <rjou@mexican.cygnus.com>
-
- * mpw-make.sed: Add quotes to RIncludes reference.
-
-Fri Dec 15 13:18:55 1995 Rob Savoye <rob@darkstar.cygnus.com>
-
- * remote-array.c: Remove bogus setting of baudrate to 4800. Their
- hardware has real UARTS now.
-
-Mon Dec 11 18:19:16 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * configure.in (powerpc-*-macos*): New target configuration.
- * configure: Update.
- * config/powerpc/macos.mh, config/powerpc/macos.mt,
- config/powerpc/nm-macos.h, config/powerpc/tm-macos.h, mac-nat.c:
- New files, native PowerMac debugging support.
- * Makefile.in (mac-nat.o): Add build rule.
- * mpw-config.in (enable_cflags): Add support.
- (m68k-apple-macos, powerpc-apple-macos): Fix natdepfiles to
- list object file instead of source file.
- * mpw-make.sed (@ENABLE_CFLAGS@): Don't edit out, replace with
- value of variable.
- (install, install-only): Edit MPW-specific installation into
- place of Unix shell code.
- * mac-gdb.r: Fix version resources to use symbolic version strings.
- (cfrg): New resource, code fragment for PowerMac.
-
-start-sanitize-gm
- mpw-config.in (mips-gm-magic): New configuration.
-end-sanitize-gm
-
-Mon Dec 11 14:13:03 1995 Fred Fish <fnf@amigalib.com>
-
- * dbxread.c (process_one_symbol): When looking at the next
- minimal symbol, check for end of the minimal symbol array
- (symbol with NULL pointer for name) before dereferencing it.
-
-Mon Dec 11 15:56:55 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * eval.c (evaluate_struct_tuple): Fix thinko.
-
-Mon Dec 11 06:52:02 1995 Wilfried Moser (Alcatel) <moser@rtl.cygnus.com>
-
- * ch-typeprint.c (chill_type_print_base): Slightly change of printing
- of variant structures.
-
-Mon Dec 11 00:36:01 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * valops.c (value_cast): Handle casts to and from TYPE_CODE_CHAR.
- * ch-exp.c (match_integer_literal): Fix long long support.
- * gdbtypes.c (get_discrete_bounds): Make TYPE_LENGTH (type) ==
- sizeof (LONGEST) case work OK.
-
-Fri Dec 8 21:02:24 1995 Fred Fish <fnf@cygnus.com>
-
- * coffread.c, dbxread.c, dstread.c, objfiles.c, os9kread.c,
- symfile.c, symtab.c: Use "obstack.h" rather than <obstack.h>.
-
-Wed Dec 6 16:16:18 1995 Stu Grossman (grossman@cirdan.cygnus.com)
-
- * remote-mips.c (mips_receive_header): Allow mips_syn_garbage to be
- user-settable (via set syn-garbage-limit). Setting it to -1 makes
- it unlimited.
-
-Tue Dec 5 18:33:43 1995 Brendan Kehoe <brendan@lisa.cygnus.com>
-
- * gdbtypes.c (check_stub_method): Make sure we get back a function
- string in the demangled name before we try to use it.
-
-Tue Dec 5 18:08:29 1995 Stu Grossman (grossman@cygnus.com)
-
- * monitor.c (monitor_expect_regexp): Make static, add prototype.
- * (monitor_read_memory_single): Call monitor_expect_regexp with
- pointer to getmem_resp_delim_pattern, not entire struct.
-
-Tue Dec 5 15:51:25 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * c-lang.h (c_op_print_tab): Don't declare, some compilers
- consider illegal if structure not defined, and only used
- in c-lang.c anyway.
-
-Sun Dec 3 12:31:03 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * eval.c (evaluate_subexp_standard case): Fix typo.
-
-Sun Dec 3 11:59:21 1995 Jeffrey A. Law <law@cygnus.com>
-
- * ch-exp.c (parse_named_record_element): Avoid aggregrate
- initializations for automatic variables.
-
- * hppa-tdep.c (hppa_alignof): Fix typo in last change.
-
-Sat Dec 2 19:32:57 1995 Fred Fish <fnf@cygnus.com>
-
- * symfile.c (global_psymbols, static_psymbols): Remove, unused.
-
-Sat Dec 2 03:02:21 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * alpha-tdep.c (heuristic_proc_desc): Add heuristic to
- determine the return address register, needed for OSF/1-3.2C.
- * config/alpha/tm-alpha.h (T7_REGNUM, T9_REGNUM): Define.
-
-Fri Dec 1 07:23:57 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * ppcbug-rom.c (ppcbug_cmds): Turn on MO_GETMEM_READ_SINGLE
- because PPCbug displays the memory as characters as well as hex.
- Fix getmem/setmem commands.
-
- * srec.c (load_srec): Fix off by one typo in last submission.
-
- * rs6000-tdep.c (push_arguments): Fix typo.
-
-Thu Nov 30 23:54:17 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * language.c (lang_bool_type), language.h: New function.
- * language.h (LA_BOOL_TYPE): New macro.
- * eval.c (evaluate_subexp_standard) Use LA_BOOL_TYPE instead
- of builtin_type_int where appropriate,
- * valarith.c (value_subscript): Likewise.
-
- * valops.c (value_slice): Implement (value) bitstring slices.
- * valprint.c (val_print): If TYPE_LENGTH is zero, don't automatically
- print "<incomplete type>" - Chill has zero-length (string) types.
-
- * gdbtypes.c (check_stub_type): Removed; no longes needed.
- * ch-exp.c (expect, parse_call): Tweak error messages.
-
-Wed Nov 29 13:35:18 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * scm-valprint.c (scm_isymnames): Remove "#@" prefix.
- (scm_scmval_print): Do not print "#@" prefix.
-
- * gdbtypes.h (enum type_code): Added TYPE_CODE_TYPEDEF.
- (check_typedef): New prototype.
- (CHECK_TYPEDEF): New macro.
- (TYPE_DUMMY_RANGE): Removed.
- * gdbtypes.c (get_discrete_bounds): Fix paren error; make more robust.
- (create_array_type): Don't force_to_range_type; users of the
- array are responsible for handling non-range index types.
- (create_set_type): Likewise.
- (force_to_range_type): Removed.
- (check_typedef): New function handles stub types and typedefs.
- (check_stub_type): Just call check_typedef. (To be removed.)
- (recursive_dump_type): Handle TYPE_CODE_TYPEDEF.
- * ch-lang.c (type_lower_upper): Use get_discrete_bounds.
- (evaluate_subexp_chill): Handle string repetition.
- Re-arrange to handle EVAL_AVOID_SIDE_EFFECTS better.
- * ch-typeprint.c (chill_type_print_base): Handle TYPE_CODE_TYPEDEF.
- Pass show=0 in recursive calls various places.
- (case TYPE_CODE_ARRAY): Don't require index type to have
- TYPE_CODE_RANGE.
- (case TYPE_CODE_RANGE): Don't need to support TYPE_DUMMY_RANGE.
- * gdbtypes.c, ch-lang.c, ch-typeprint.c (numerous places):
- Add check_typedef/CHECK_TYPEDEF as needed.
-
- * ch-exp.y: Replaced by ...
- * ch-exp.c: New file. Use recursive-descent.
- Recognize labelled array tuples and powerset ranges.
- * Makefile.in: Update for no longer using yacc for ch-exp.
-
- * c-lang.c: Make various functions non-static.
- * c-lang.h: Add bunches of prototypes.
- * cp-valprint.c (cp_print_value_fields): Also take address.
- (cp_print_value): Likewise. Use baselcass_offset.
- * stabsread.c (current_symbol): New static variable.
- (type_synonym_name): Remove.
- (read_type): If copying, make copy be a TYPE_CODE_TYPEDEF.
- (read_array_type): Don't need to handle undefined element type here.
- (cleanup_undefined_types): Ditto.
- (read_range_type): Look for Chill ranges.
- * valops.c (value_assign): Fix case lval_internalvar - don't try
- to assign into old value (which might be too small!).
- (value_coerce_array): No longer need special VALUE_REPEATED handling.
- (value_arg_coerce): Cleaner array->pointer decay mechanism.
- (search_struct_field): Use baseclass_offset rather than
- baseclass_addr.
- (value_slice): Use get_discrete_bounds.
- * value.h (COERCE_VARYING_ARRAY): Take type argumnt as well.
- * values.c (baseclass_offset): Change parameter interface.
- (baseclass_addr): Removed.
- * c-typeprint.c, c-valprint.c, ch-valprint.c, values.c, valops.c:
- Add check_typedef/CHECK_TYPEDEF as needed.
-
- * alpha-tdep.c, c-exp.y, h8500-tdep.c, f-exp.y, f-valprint.c,
- findvar.c, hppa-tdep.c, infcmd.c, language.c, printcmd.c,
- rs6000-tdep.c, symmisc.c, symtab.c, mdebugread.c:
- Add check_typedef/CHECK_TYPEDEF as needed.
-
- * f-typeprint.c, valarith.c, valprint.c, typeprint.c, eval.c:
- Add check_typedef/CHECK_TYPEDEF as needed.
- * f-typeprint.c: Various cleaning up.
- * valarith.c (value_subscript): Also subscript bitstrings (for Chill).
- * typeprint.c (print_type_scalar): Also support TYPE_CODE_RANGE.
- * eval.c (evaluate_subexp_standard case OP_ARRAY): Implement
- support for labelled array tuples and ranges in powerset tuples.
- (init_array_element): New function.
-
- * top.c (command_line_input): Only strip out an initial #-comment.
- Looking for internal comments is language-specific (breaks Scheme).
-
- * expression.h (enum exp_opcode): Add BINOP_RANGE.
- * expprint.c (dump_expression): Support BINOP_RANGE.
- * eval.c (evaluate_subexp_standard): Handle BINOP_RANGE (as error).
- (case MULTI_SUBSCRIPT): Fix broken f77 value->int ad hoc conversion.
- * ch-lang.c (chill_op_print_tab): Support BINOP_RANGE.
- (evaluate_subexp_chill): Error on BINOP_COMMA.
-
- * Makefile.in: Clean up so doc stuff stays in doc sub-dir.
-
-Wed Nov 29 16:39:50 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * monitor.c (monitor_debug): New function to print monitor debug
- output in printable fashion.
- (monitor_printf{,_noecho}): Call monitor_debug instead of
- fputs_unfiltered.
-
- * srec.c (load_srec): When printing srec debug information, do not
- print the carriage return directly, instead print \\r followed by
- a newline.
-
-Tue Nov 28 15:25:28 1995 Doug Evans <dje@canuck.cygnus.com>
-
- * Makefile.in (target_subdir): Define.
- (CC_FOR_TARGET, CXX_FOR_TARGET): Use it to find target libraries.
- * configure.in (X_CFLAGS): Fix typo.
- (target_subdir): Set to "${target_alias}/" if cross.
- * configure: Regenerated.
-
- * dbxread.c (dbx_symfile_read): Set block_address_function_relative
- for `pe' format files.
-
-Tue Nov 28 11:17:47 1995 Fred Fish <fnf@cygnus.com>
-
- * magic.h: Renamed to gmagic.h to avoid <magic.h> conflict.
- * magic.c: Renamed to gmagic.c in sympathy.
- * eval.c, gmagic.c, config/tm-magic.h:
- Include "gmagic.h" rather than "magic.h".
-
-Sat Nov 25 02:56:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * mdebugread.c (handle_psymbol_enumerators, parse_symbol):
- Recognize enums from alpha cc -migrate.
- (upgrade_type): Pass correct fd to parse_symbol when parsing
- the index type of an array.
- (parse_procedure, parse_lines, psymtab_to_symtab_1): Handle
- unsorted procedure descriptors from Irix 5.x and Alpha OSF/1-3.x
- shared libraries. Use CORE_ADDR instead of `unsigned long' in
- procedure descriptor address computations.
-
- * symtab.c (decode_line_1): Prevent accidental strchr match
- of a null character with the terminating null character of
- gdb_completer_quote_characters.
- (cplusplus_hint): Make sure that only a single quote is printed
- in the hint message.
-
-Fri Nov 24 16:17:01 1995 Jeffrey A Law (law@cygnus.com)
-
- * top.c (recurse_read_control_structure): Don't make cleanups
- here. Callers handle that correctly.
-
-Tue Nov 21 15:16:34 1995 Fred Fish <fnf@rtl.cygnus.com>
-
- * config/m68k/xm-hp300hpux.h: Define MMAP_BASE_ADDRESS and MMAP_INCREMENT.
- Also force HAVE_MMAP to be defined since autoconf is currently broken
- for detecting a working mmap under hpux.
- * config/pa/xm-hppah.h (MMAP_BASE_ADDRESS): Tweak MMAP_BASE_ADDRESS
- to a better value suggested by Jeffrey A Law (law@cygnus.com).
-
-Tue Nov 21 08:48:58 1995 Fred Fish <fnf@cygnus.com>
-
- * config/pa/xm-hppah.h: Define MMAP_BASE_ADDRESS and MMAP_INCREMENT.
- Also force HAVE_MMAP to be defined since autoconf is currently broken
- for detecting a working mmap under hpux.
- * objfiles.c (map_to_address): Have gdb print a warning when it
- is compiled with HAVE_MMAP but without both MMAP_BASE_ADDRESS and
- MMAP_INCREMENT defined (thus making it appear mmap doesn't work).
-
-Mon Nov 20 14:13:53 1995 Stu Grossman (grossman@cygnus.com)
-
- * infrun.c (wait_for_inferior): Add support for dynamic function
- trampolines. These are pieces of code between the caller and the
- callee that figure out the address of the callee's code at run
- time. Upon entry, we can't figure out the callee's address, so we
- set a breakpoint within the trampoline where the address will be
- known, and continue the target. Once we hit the breakpoint, we
- break at the callee's address and proceed as usual.
-start-sanitize-gm
- * config/tm-magic.h: Define DYNAMIC_TRAMPOLINE_NEXTPC. Turn off
- IN_SOLIB_CALL_TRAMPOLINE and IN_SOLIB_RETURN_TRAMPOLINE.
-end-sanitize-gm
-
-Mon Nov 20 11:12:34 1995 Fred Fish <fnf@cygnus.com>
-
- * objfiles.c (allocate_objfile): Change warning message about mapped
- symbol tables so that it is obvious that they are not supported on
- this particular machine rather than implying they are not supported
- at all in this version of gdb.
-
-Sun Nov 19 05:20:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * irix5-nat.c, osfsolib.c (solib_address): Return the name of the
- containing solib.
- * stack.c (print_frame_info): Use minimal symbol only if
- fi->pc is in a known section.
-
-Sat Nov 18 11:19:35 1995 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
-
- * solib.c (solib_address): Return the name of the containing solib.
- * solib.h (PC_SOLIB): New macro; define using solib_address.
- * stack.c (print_frame_info) [PC_SOLIB]: If no function name, try
- PC_SOLIB on the PC value.
-
-Sat Nov 18 04:09:31 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * annotate.c (annotate_source, annotate_frame_begin): Issue
- `0x' prefix for the pc value, to remain consistent with previous
- GDB versions.
-
- * blockframe.c (find_pc_partial_function), config/pa/tm-hppa.h:
- Remove Sun shared library transfer hack and
- INHIBIT_SUNSOLIB_TRANSFER_TABLE_HACK, it is obsoleted by the
- mst_solib_trampoline minimal symbols.
-
- * blockframe.c (inside_main_func): Check main_func_*pc against
- INVALID_ENTRY_*PC, not zero.
- * symfile.c (init_entry_point_info): Initialize ei.*pc with
- INVALID_ENTRY_*PC.
- * mipsread.c (mipscoff_symfile_read): If the entry_file bounds
- are still unknown after processing the partial symbols, then try
- to set them from the minimal symbols.
-
- * infcmd.c (registers_info): Error out if selected_frame is NULL.
- * stack.c (return_command): Select new current frame silently if
- not interactive.
-
- * mipsread.c (read_alphacoff_dynamic_symtab): Ignore additional
- DT_MIPS_LOCAL_GOTNO and DT_MIPS_GOTSYM entries.
-
- * irix5-nat.c (solib_create_inferior_hook): Call solib_add only
- if auto_solib_add_at_startup is nonzero.
- (_initialize_solib): Add "set auto-solib-add" command.
- * osfsolib.c (solib_create_inferior_hook): Call solib_add only
- if auto_solib_add_at_startup is nonzero.
- (_initialize_solib): Add "set auto-solib-add" command.
-
-Wed Nov 15 17:12:04 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * utils.c: Don't include sys/ioctl.h etc if MPW is host.
-
-Tue Nov 14 17:16:46 1995 Doug Evans <dje@canuck.cygnus.com>
-
- * config/arm/tm-arm.h (ADDITIONAL_REGISTER_NAMES): Fix r5.
- (FRAME_SAVED_PC): Minor clean up.
-
-Tue Nov 14 14:51:05 1995 Stu Grossman (grossman@cygnus.com)
-
- * monitor.c (monitor_load_srec monitor_make_srec): Move all
- S-record download code into srec.c.
- * srec.c srec.h: New files. Contain S-record loading routines
- formerly in monitor.c.
- * serial.c serial.h: New routine just like fprintf, but uses
- serial_t instead of FILE *.
- * sh-tdep.c (frame_find_saved_regs init_extra_frame_info):
- Don't add four to saved pc (makes things match manual). Also, fix
- bug where we didn't get pc from stack frame correctly.
- * config/sh/tm-sh.h (SAVED_PC_AFTER_CALL): Don't add four to
- saved pc. Real hardware does this for you.
- * sh3-rom.c (sh3_load): New routine. Sets up for download then
- calls generic S-record loader.
- * config/h8300/h8300.mt, config/h8500/h8500.mt,
- config/m68k/monitor.mt, config/pa/hppapro.mt, config/sh/sh.mt:
- Add srec.o to TDEPFILES.
-
-Tue Nov 14 15:57:36 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * ppcbug-rom.c: New file to support the Motorola PPCBUG monitor
- for PowerPC's.
-
- * config/powerpc/ppc{,le}-{eabi,sim}.mt (TDEPFILES): Include
- ppcbug-rom.o, monitor.o, and srec.o
-
- * config/i386/linux.mt (XDEPFILES): Include ser-tcp.o.
-
-Mon Nov 13 13:12:46 1995 Jeffrey A Law (law@cygnus.com)
-
- * partial-stab.h: Remove GDB_TARGET_IS_HPPA kludge.
-
-Fri Nov 10 13:08:54 1995 Jeff Law (law@kahlua.cs.utah.edu)
-
- * terminal.h (HAVE_SGTTY): Fix typo.
-
-Thu Nov 9 17:34:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * configure.in (gdb_target): Build in the simulator for all
- PowerPC eabi targets, not just eabisim, providing
- --enable-sim-powerpc is used, or the host compiler is GCC.
-
-Thu Nov 9 14:04:05 1995 Raymond Jou (rjou@mexican.cygnus.com)
-
- * mpw-config.in: Add variable with names of SIOW libraries.
- * mpw-make.sed: Add an action to build SIOWgdb.
-
-Wed Nov 8 19:25:22 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * mpw-make.sed: Edit @ENABLE_CFLAGS@ out, mpw-configure can
- add back in if necessary.
-
-Wed Nov 8 15:59:52 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
-
- * config/mips/vr4300.mt: Added simulator to default VR4300 build.
-
-Tue Nov 7 16:02:25 1995 Stu Grossman (grossman@cygnus.com)
-
- * remote-mips.c (mips_initialize): Fix brain damage found by
- Jamie. Basically had case statement in the wrong place...
- * (mips_load): Remove unnecessary `db tty0' command. It's all
- handled by mips_initialize now.
-
-Tue Nov 7 12:59:14 1995 Raymond Jou <rjou@mexican.cygnus.com>
-
- * mac-gdb.r: Added #ifdef Macgdb.
-
-Tue Nov 7 14:59:51 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
-
- * remote-mips.c (mips_initialize): Updated to talk to VR4300 RISQ
- monitor board.
-
-Mon Nov 6 11:44:11 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
-
- * config/mips/{tm-vr4300.h tm-vr4300el.h} (TARGET_MONITOR_PROMPT):
- Change into real strings.
-
- * remote-sim.c (gdbsim_open): Moved sim_open() call to after
- callback initialisation.
-
-Sun Nov 5 00:07:52 1995 Jason Molenda (crash@phydeaux.cygnus.com)
-
- * configure.in (AC_CHECK_HEADERS): add stddef.h.
-
-Fri Nov 3 12:30:43 1995 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (COMMON_OBS): Use corefile.o rather than core.o
- * core.c: Rename to corefile.c.
- * config/pyr/tm-pyr.h, umax-xdep.c, sun386-nat.c, pyr-xdep.c,
- Makefile.in (SFILES), gould-xdep.c, coredep.c, armtdep.c,
- arm-xdep.c, altos-xdep.c: Change core.c references to corefile.c.
-
- From Graham Stoney <greyham@research.canon.oz.au>.
- * Makefile.in (remote-array.o): Add rule to build.
- (ALLDEPFILES): Add remote-array.c
- * remote-array.c (baud_rate): Remove unnecessary declaration.
- (baudrate): Remove.
- (array_files_info): Print global baud_rate not baudrate.
-
-Sat Nov 4 10:21:58 1995 Stu Grossman (grossman@cygnus.com)
-
- * Makefile.in (INTERNAL_CFLAGS): Add ENABLE_CFLAGS.
- * fork-child.c (fork_inferior): Add call to
- TARGET_CREATE_INFERIOR_HOOK to allow target specific code to get
- control just before the new process executes it's first instruction.
- * remote-mips.c (mips_initialize): Cleanup a bit. Don't try to
- receive a packet at first. This speeds up initialization a lot.
- Use TARGET_MONITOR_PROMPT instead of "<IDT>".
- (common_breakpoint): Use rresponse instead of rerrflg to inspect
- error code.
- * symfile.c (syms_from_objfile reread_symbols): Call
- TARGET_SYMFILE_POSTREAD to allow target specific code to get
- control after reading new symbols.
- * target.h: New macros TARGET_SYMFILE_POSTREAD, and
- TARGET_CREATE_INFERIOR_HOOK. See above for descriptions.
- * config/mips/{irix5.mh nm-irix5.h}: Delete nm-irix5.h. Make
- NAT_FILE point directly at ../nm-sysv4.h.
- * config/mips/{mipsm3.mh nm-m3.h}: Delete nm-m3.h. Make
- NAT_FILE point directly at ../nm-m3.h.
- * config/mips/{mipsv4.mh nm-sysv4.h}: Delete nm-sysv4.h. Make
- NAT_FILE point directly at ../nm-sysv4.h.
- * config/mips/nm-mips.h: Improve comment at top of file.
- * config/mips/tm-mips.h (TARGET_MONITOR_PROMPT): Change
- definition into a proper string.
-start-sanitize-gm
- * configure configure.in: Add support for --enable-gm.
- (mips*-*-magic*): Change target from magic to idt.
- * eval.c expprint.c expression.h parse.c remote-mips.c utils.c:
- Change GENERAL_MAGIC_HACKS to GENERAL_MAGIC.
- * magic.c magic.h: Update files from GM.
- * config/mips/magic.mt: Delete. No longer necessary now that we
- use --enable mechanism.
- * config/mips/tm-idt.h: Add GM stuff needed for remote GM box.
- * config/mips/tm-irix5.h: Add GM stuff needed for native Irix box.
- * config/mips/tm-magic.h: Move up to config/tm-magic.h. Move all
- platform specific stuff into tm-irix.h and tm-idt.h. Add defs for
- TARGET_SYMFILE_POSTREAD and TARGET_CREATE_INFERIOR_HOOK.
-end-sanitize-gm
-
-Wed Nov 1 20:18:08 1995 Fred Fish <fnf@cygnus.com>
-
- * config/i386/tm-i386.h: New file containing generic i*86 target
- definitions.
- (TARGET_BYTE_ORDER): Moved here from tm-i386v.h.
- (IEEE_FLOAT): Moved here from tm-i386v.h.
- (START_INFERIOR_TRAPS_EXPECTED): Define default as 2.
- (FUNCTION_START_OFFSET): Moved here from tm-i386v.h.
- (SKIP_PROLOGUE): Moved here from tm-i386v.h.
- (SAVED_PC_AFTER_CALL): Moved here from tm-i386v.h.
- (INNER_THAN): Moved here from tm-i386v.h.
- (BREAKPOINT): Moved here from tm-i386v.h.
- (DECR_PC_AFTER_BREAK): Moved here from tm-i386v.h.
- (ABOUT_TO_RETURN): Moved here from tm-i386v.h.
- (REGISTER_SIZE): Moved here from tm-i386v.h.
- (NUM_REGS): Moved here from tm-i386v.h.
- (REGISTER_NAMES): Moved here from tm-i386v.h.
- (EXTRACT_STRUCT_VALUE_ADDRESS): Moved here from tm-i386v.h.
- (FP_REGNUM): Moved here from tm-i386v.h.
- (SP_REGNUM): Moved here from tm-i386v.h.
- (PC_REGNUM): Moved here from tm-i386v.h.
- (PS_REGNUM): Moved here from tm-i386v.h.
- (FP0_REGNUM): Moved here from tm-i386aix.h.
- (FPC_REGNUM): Moved here from tm-sun386.h.
- (REGISTER_BYTES): Moved here from tm-i386aix.h.
- (REGISTER_BYTE): Moved here from tm-i386aix.h.
- (REGISTER_RAW_SIZE): Moved here from tm-i386aix.h.
- (MAX_REGISTER_RAW_SIZE): Moved here from tm-i386aix.h.
- (REGISTER_VIRTUAL_SIZE): Moved here from tm-i386aix.h.
- (MAX_REGISTER_VIRTUAL_SIZE): Moved here from tm-i386aix.h.
- (EXTRACT_RETURN_VALUE): Moved here from tm-i386aix.h.
- (STORE_RETURN_VALUE): Moved here from tm-i386aix.h.
- (REGISTER_VIRTUAL_TYPE): Moved here from tm-i386v.h.
- (STORE_STRUCT_RETURN): Moved here from tm-i386v.h.
- (FRAME_CHAIN): Moved here from tm-i386v4.h.
- (FRAMELESS_FUNCTION_INVOCATION): Moved here from tm-i386v4.h.
- (FRAME_SAVED_PC): Moved here from tm-i386os9k.h
- (FRAME_ARGS_ADDRESS): Moved here from tm-i386v.h.
- (FRAME_LOCALS_ADDRESS): Moved here from tm-i386v.h.
- (FRAME_NUM_ARGS): Moved here from tm-i386sun.h.
- (FRAME_ARGS_SKIP): Moved here from tm-i386v.h.
- (FRAME_FIND_SAVED_REGS): Moved here from tm-i386v.h.
- (PUSH_DUMMY_FRAME): Moved here from tm-i386v.h.
- (POP_FRAME): Moved here from tm-i386v.h.
- (CALL_DUMMY, CALL_DUMMY_LENGTH, CALL_DUMMY_START_OFFSET,
- CALL_DUMMY_BREAKPOINT_OFFSET, FIX_CALL_DUMMY): Moved here from
- tm-i386v.h
- (print_387_control_word, print_387_status_word): Declare prototypes.
- (struct frame_info, struct frame_saved_regs): Forward decls for
- prototypes.
- (SP_ARG0): Moved here from tm-i386v.h.
-
- * config/i386/tm-i386v.h:
- (i386/tm-i386.h): Include.
- (TARGET_BYTE_ORDER): Remove.
- (IEEE_FLOAT): Remove.
- (START_INFERIOR_TRAPS_EXPECTED): Undef before redefine to 4.
- (FUNCTION_START_OFFSET): Remove.
- (SKIP_PROLOGUE): Remove.
- (i386_skip_prologue): Remove prototype.
- (SAVED_PC_AFTER_CALL): Remove.
- (INNER_THAN): Remove.
- (BREAKPOINT): Remove.
- (DECR_PC_AFTER_BREAK): Remove.
- (ABOUT_TO_RETURN): Remove.
- (REGISTER_SIZE): Remove.
- (NUM_REGS): Undef before redefine to 16 (no FP support).
- (REGISTER_NAMES): Undef before redefine.
- (FP_REGNUM, SP_REGNUM, PC_REGNUM, PS_REGNUM): Remove.
- (REGISTER_BYTES): Undef before redefine.
- (REGISTER_BYTE): Undef before redefine.
- (REGISTER_RAW_SIZE): Undef before redefine.
- (REGISTER_VIRTUAL_SIZE): Undef before redefine.
- (MAX_REGISTER_RAW_SIZE): Undef before redefine.
- (MAX_REGISTER_VIRTUAL_SIZE): Undef before redefine.
- (REGISTER_VIRTUAL_TYPE): Undef before redefine.
- (STORE_STRUCT_RETURN): Undef before redefine.
- (EXTRACT_RETURN_VALUE): Undef before redefine.
- (STORE_RETURN_VALUE): Undef before redefine.
- (EXTRACT_STRUCT_VALUE_ADDRESS): Remove.
- (FRAME_CHAIN): Undef before redefine.
- (FRAMELESS_FUNCTION_INVOCATION): Undef before redefine.
- (FRAME_SAVED_PC): Undef before redefine.
- (FRAME_ARGS_ADDRESS): Remove.
- (FRAME_LOCALS_ADDRESS): Remove.
- (FRAME_NUM_ARGS): Undef before redefine.
- (FRAME_ARGS_SKIP): Remove.
- (FRAME_FIND_SAVED_REGS): Remove.
- (PUSH_DUMMY_FRAME): Remove.
- (POP_FRAME): Remove.
- (CALL_DUMMY): Remove.
- (CALL_DUMMY_LENGTH): Remove.
- (CALL_DUMMY_START_OFFSET): Remove.
- (CALL_DUMMY_BREAKPOINT_OFFSET): Remove
- (FIX_CALL_DUMMY): Remove.
- (print_387_control_word): Remove.
- (print_387_status_word): Remove.
- (SP_ARG0): Remove.
-
- * config/i386/tm-symmetry.h:
- (TM_SYMMETRY_H): Enclose file in test for define & define if needed.
- (START_INFERIOR_TRAPS_EXPECTED): Move to after inclusion of
- tm-i386v4.h or tm-i386v.h, #undef, and #define back to 2.
- (DECR_PC_AFTER_BREAK): Move to after inclusion of tm-i386v4.h
- or tm-i386v.h, #undef, and #define to 0.
- (MAX_REGISTER_RAW_SIZE): Remove.
- (FRAME_CHAIN): Remove.
- (FRAMELESS_FUNCTION_INVOCATION): Remove.
- (FRAME_SAVED_PC): Remove.
- (print_387_control_word, print_387_status_word): Remove prototypes.
-
- * config/i386/tm-ptx.h:
- (TM_PTX_H): Enclose file in test for define & define if needed.
- (START_INFERIOR_TRAPS_EXPECTED): Move to after inclusion of
- tm-i386v4.h or tm-i386v.h, #undef, and #define back to 2.
- (DECR_PC_AFTER_BREAK): Move to after inclusion of tm-i386v4.h
- or tm-i386v.h, #undef, and #define to 0.
- (SDB_REG_TO_REGNUM): Remove obsolete commented out define.
- (print_387_control_word, print_387_status_word): Remove prototypes.
-
- * config/i386/tm-linux.h:
- (TM_LINUX_H): Enclose file in test for define & define if needed.
- (i386/tm-i386.h): Include instead of tm-i386v.h.
- (START_INFERIOR_TRAPS_EXPECTED): Remove.
-
- * config/i386/tm-i386v4.h:
- (TM_I386V4_H): Enclose file in test for define & define if needed.
- (i386/tm-i386.h): Include instead of tm-i386v.h.
- (START_INFERIOR_TRAPS_EXPECTED): Remove.
- (FRAME_CHAIN): Moved to tm-i386.h.
- (FRAMELESS_FUNCTION_INVOCATION): Moved to tm-i386.h.
- (FRAME_SAVED_PC): Remove.
- (sigtramp_saved_pc): Define as i386v4_sigtramp_saved_pc.
- (FRAME_NUM_ARGS): Remove.
-
- * config/i386/tm-i386os9k.h:
- (TM_I386OS9K_H): Enclose file in test for define & define if needed.
- (i386/tm-i386.h): Include instead of tm-i386v.h.
- (START_INFERIOR_TRAPS_EXPECTED): Remove.
- (NUM_REGS): Undefine before redefining.
- (FRAME_CHAIN): Remove.
- (FRAMELESS_FUNCTION_INVOCATION): Remove.
- (FRAME_SAVED_PC): Move to tm-i386.h.
-
- * config/i386/tm-i386nw.h:
- (TM_I386NW_H): Enclose file in test for define & define if needed.
- (i386/tm-i386.h): Include instead of tm-i386v.h.
- (START_INFERIOR_TRAPS_EXPECTED): Remove.
-
- * config/i386/tm-i386bsd.h:
- (TM_I386BSD_H): Enclose file in test for define & define if needed.
- (i386/tm-i386.h): Include instead of tm-i386v.h.
- (START_INFERIOR_TRAPS_EXPECTED): Remove.
- (FRAMELESS_FUNCTION_INVOCATION): Remove.
- (FRAME_SAVED_PC): Remove.
-
- * config/i386/tm-i386aix.h:
- (i386/tm-i386.h): Include instead of tm-i386v.h.
- (START_INFERIOR_TRAPS_EXPECTED): Remove.
- (FP_REGNUM): Remove.
- (SP_REGNUM): Remove.
- (PC_REGNUM): Remove.
- (PS_REGNUM): Remove.
- (FP0_REGNUM): Moved to tm-i386.h.
- (NUM_REGS): Remove.
- (REGISTER_NAMES): Remove.
- (REGISTER_BYTES): Moved to tm-i386.h.
- (REGISTER_BYTE): Moved to tm-i386.h.
- (REGISTER_RAW_SIZE): Moved to tm-i386.h.
- (MAX_REGISTER_RAW_SIZE): Moved to tm-i386.h.
- (REGISTER_VIRTUAL_SIZE): Moved to tm-i386.h.
- (REGISTER_VIRTUAL_TYPE): Removed.
- (EXTRACT_RETURN_VALUE): Moved to tm-i386.h.
- (STORE_RETURN_VALUE): Moved to tm-i386.h.
-
- * config/i386/tm-sun386.h:
- (TM_SUN386_H): Enclose file in test for define & define if needed.
- (i386/tm-i386.h): Include.
- (TARGET_BYTE_ORDER): Remove.
- (FUNCTION_START_OFFSET): Remove.
- (SKIP_PROLOGUE): Remove.
- (SAVED_PC_AFTER_CALL): Remove.
- (INNER_THAN): Remove.
- (BREAKPOINT): Remove.
- (DECR_PC_AFTER_BREAK): Remove.
- (ABOUT_TO_RETURN): Remove.
- (REGISTER_SIZE): Remove.
- (NUM_REGS): Undefine before defining.
- (REGISTER_NAMES): Undefine before redefining.
- (REGISTER_BYTES): Undefine before redefining.
- (REGISTER_BYTE): Undefine before defining.
- (FP_REGNUM): Undefine before defining.
- (PC_REGNUM): Undefine before defining.
- (FPC_REGNUM): Undefine before defining.
- (REGISTER_RAW_SIZE): Undefine before defining.
- (FRAME_CHAIN): Undefine before defining.
- (FRAMELESS_FUNCTION_INVOCATION): Undefine before defining.
- (FRAME_SAVED_PC): Undefine before defining.
- (FRAME_NUM_ARGS): Moved to tm-i386.h.
- (MAX_REGISTER_RAW_SIZE): Remove.
- (MAX_REGISTER_VIRTUAL_SIZE): Remove.
- (STORE_STRUCT_RETURN): Remove.
- (EXTRACT_STRUCT_VALUE_ADDRESS): Remove.
- (FRAME_ARGS_ADDRESS): Remove.
- (FRAME_LOCALS_ADDRESS): Remove.
- (FRAME_NUM_ARGS): Undefine before defining.
- (FRAME_ARGS_SKIP): Remove.
- (FRAME_FIND_SAVED_REGS): Remove.
- (PUSH_DUMMY_FRAME): Remove.
- (POP_FRAME): Remove.
- (CALL_DUMMY, CALL_DUMMY_LENGTH, CALL_DUMMY_START_OFFSET): Remove.
- (struct frame_info, struct frame_saved_regs): Remove forward decls
- for prototypes.
-
- * config/i386/tm-i386lynx.h (i386/tm-i386.h): Include instead of
- tm-i386v.h.
- * config/i386/tm-i386m3.h (i386/tm-i386.h): Include instead of
- tm-i386v.h.
-
- * i386-tdep.c (i386_extract_return_value): Make function visible
- for all i386 targets, but only assume floating point values returned
- in floating point registers for I386_AIX_TARGET.
-
- * i386v-nat.c (i386_register_u_addr): Enable code to locate
- floating point regs in user struct.
-
-Wed Nov 1 15:32:57 1995 Fred Fish <fnf@cygnus.com>
-
- * breakpoint.c (breakpoint_re_set): Fix typo in comment.
- * symtab.c (in_prologue): Document func_start and when it is zero
- don't call SKIP_PROLOGUE (which typically leads unconditionally to
- an error when we try to access a prologue at address 0).
-
-Tue Oct 31 13:01:15 1995 Fred Fish <fnf@cygnus.com>
-
- * elfread.c: Include elf-bfd.h rather than libelf.h.
-
-Tue Oct 31 10:42:42 1995 steve chamberlain <sac@slash.cygnus.com>
-
- * win32-nat.c (xlate_exception): Treat a stack overflow like a SEGV.
-
-Sun Oct 29 11:22:05 1995 Fred Fish <fnf@cygnus.com>
-
- * monitor.c: Include gnu-regex.h rather than system regex.h.
-
-Sat Oct 28 23:51:48 1995 steve chamberlain <sac@slash.cygnus.com>
-
- * defs.h: Test on name __WIN32__ rather than WIN32.
- * inflow.c (new_tty): Likewise
- * terminal.h: Likewise.
- * utils.c (initialize_utils): Likewise.
- * win32-nat.c (child_create_inferiror): Print error code when failing.
- * config/i386/win32.mh (XM_CLIBS): Need -lkernel32.
-
-Sat Oct 28 04:52:36 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * symtab.h (enum address_class): Add LOC_UNRESOLVED for
- a location whose address has to be resolved via the minimal
- symbol table.
- * buildsym.c (finish_block), findvar.c (symbol_read_needs_frame,
- read_var_value), printcmd.c (address_info),
- symmisc.c (print_symbol, print_partial_symbol): Handle
- LOC_UNRESOLVED.
- * stabsread.c (scan_file_globals): Change unresolved LOC_STATIC
- symbols to LOC_UNRESOLVED. Remove rt_common_objfile lookup
- kludge, global common symbols are now handled by LOC_UNRESOLVED.
- (scan_file_globals_1): Move code back to scan_file_globals,
- delete.
-
-Fri Oct 27 09:54:07 1995 Stu Grossman (grossman@cygnus.com)
-
- * breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET
- around calls to create_longjmp_breakpoint. Why install the
- breakpoints if we can't find the longjmp target?
- * infrun.c (wait_for_inferior): Cleanup comments near call test.
- * remote-mips.c: Fixed a bunch of prototypes to avoid char/int
- complaint from picky compilers. Add comment to mips_expect.
- Replace all instances of sr_get_debug with remote_debug.
- * (mips_readchar): Don't jam init string to monitor.
- mips_initialize() handles that.
- * (mips_receive_header): Print better message when we get too
- much garbage.
- * (mips_request): Allow caller to pass in buff to allow them to
- analyze the returned message.
- * (mips_initialize): Re-do initialization to try sending a BREAK,
- a ^C, and then a download escape sequence. Cleanup protocol
- startup. Eliminate sleeps. Clear breakpoints (if using monitor
- breakpoints). Re-init frame.
- * (mips_detach): Close down target.
-start-sanitize-gm
- * (mips_resume): Pass signal down to target.
- * (mips_create_inferior): Start target with TARGET_SIGNAL_PWR.
-end-sanitize-gm
- * (mips_wait): Handle return status with registers, or breakpoint stuff.
- * (mips_kill): Add ^C handling.
- * (mips_insert_breakpoint mips_remove_breakpoint): Call new
- breakpoint stuff if enabled.
- * (calculate_mask remote_mips_set_watchpoint
- remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint):
- Hardware watchpoint/breakpoint stuff.
- * (common_breakpoint): Common code for new monitor breakpoint commands.
- * (mips_load): Don't use `prompt'. It's a global variable.
- * top.c (dont_repeat_command): New command for use in
- user-defined commands to suppress auto-repeat (by hittin return key).
-start-sanitize-gm
- * utils.c (request_quit): Call target_kill here. Good idea.
- Needs a better implementation.
-end-sanitize-gm
- * valops.c: Add start of auto function-call abandonment capability.
-
-start-sanitize-gm
- * c-exp.y: Add code (currently disabled) to handle GM dynamic
- structures (it conflicts with @!).
- * eval.c (evaluate_subexp_standard): ditto.
- * expprint.c (print_subexp dump_expression): ditto.
- * expression.h (enum exp_opcode): ditto.
- * parse.c (length_of_subexp): ditto.
- * configure, configure.in: Add mip*-*-magic* target.
- * magic.c magic.h: Special routines to handle GM stuff (like
- stepping through dispatcher).
- * config/mips/tm-magic.h config/mips/magic.mt: New files for
- magic target support.
-end-sanitize-gm
-
-Thu Oct 26 22:02:27 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * mpw-config.in: Add support for PowerMac host, add beginnings
- of native support.
- * mpw-make.sed: Disable subdir recursion, edit out useless rule.
- * mac-xdep.c (Values.h): Don't include.
- (GestaltEqu.h): Include Gestalt.h instead.
- (do_mouse_down): Comment out control tracking, needs to be
- updated to use UPP before will work on PowerMac.
- * config/xm-mpw.h: New file, all-Mac host support.
- * config/m68k/xm-mpw.h: Move most definitions into generic Mac
- support.
- * config/powerpc/xm-mpw.h: New file, PowerMac host support.
-
-Thu Oct 26 15:21:32 1995 Brendan Kehoe <brendan@lisa.cygnus.com>
-
- * regex.h: Renamed to gnu-regex.h.
- * regex.c: Renamed to gnu-regex.c.
- * Makefile.in (POSSLIBS): Refer to gnu-regex.h and gnu-regex.c.
- (REGEX, REGEX1): Change to gnu-regex.o instead of regex.o.
- (regex.o): Renamed to gnu-regex.o; refer to gnu-regex.c.
- (irix5-nat.o, osfsolib.o, gnu-regex.o, solib.o, source.o, symtab.o):
- Likewise.
- * irix5-nat.c, osfsolib.c, gnu-regex.c, solib.c, source.c, symtab.c):
- Include "gnu-regex.h" instead of "regex.h".
- * alpha-tdep.c (in_prologue): Rename to alpha_in_prologue, to
- avoid conflicts with symtab.h.
-
-Tue Oct 24 18:30:18 1995 Jason Molenda (crash@phydeaux.cygnus.com)
-
- * config/pa/hppahpux.mh: Remove hardcoding of X locations.
- * Makefile.in: Use X11_CFLAGS, X11_LDFLAGS and X11_LIBS.
- * configure.in: Link X statically on Solaris, SunOS and HPUX.
-
-Tue Oct 24 12:26:14 1995 Stu Grossman (grossman@cygnus.com)
-
- * monitor.c (monitor_expect_regexp): Same as monitor_expect, but
- with the obvious extension.
- (monitor_read_memory_single): Use regexp for getmem.resp_delim
- because of parsing ambiguities caused by certain monitors.
- (monitor_read_memory): Use new regexp stuff to parse
- getmem.resp_delim.
- * monitor.h (struct memrw_cmd->resp_delim): Document this as a
- regexp.
- * sh3-rom.c: Finish off table. Use new regexp capability for
- getmem commands.
-
- * infrun.c (wait_for_inferior): Disable questionable code near
- the step range test. Replace call detection test with much
- simpler (and more efficient) test that doesn't require prologue
- examination (as often).
- * symtab.c symtab.h (in_prologue): New function that indicates
- whether or not we are in a function prologue. This uses the
- symbol table, and then falls back to prologue examination if that
- fails. It's much more efficient for remote debugging because it
- avoids examining memory, which is very slow. This is used in
- wait_for_inferior to determine if we've made a function call that
- needs to be skipped over (for next/nexti).
- * mips-tdep.c (after_prologue): New function, returns the PC
- after the prologue. Uses PDRs and the symbol table.
- (mips_find_saved_regs): Use in_prologue() to avoid costly
- prologue examination if possible.
- (mips_skip_prologue): Use after_prologue() if possible to avoid
- costly prologue examination.
-
-Mon Oct 23 16:03:33 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
-
- * configure.in (configdirs): Added support for the VR4300 default
- builds (mips64*vr4300*el-*-elf*, mips64*vr4300*-*-elf*).
-
- * configure: Regenerated.
-
- * remote-mips.c (mips_load): Updated the prompt spotting code to
- make use of the TARGET_MONITOR_PROMPT manifest.
-
-Sat Oct 21 06:11:49 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * alpha-tdep.c, mips-tdep.c (init_extra_frame_info):
- Do not set saved registers from heuristics for a sigtramp frame.
-
- * dwarfread.c (enum_type): Determine signedness of enum type
- from enumerators.
-
- * mips-tdep.c: Include gdb_string.h, gcc -Wall lint.
-
- * rs6000-nat.c (xcoff_relocate_core): Fix typo.
-
- * valops.c (value_repeat): Fix length of memory transfer to
- match recent allocate_repeat_value change.
-
-Thu Oct 19 19:04:35 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * gdbtypes.c (get_discrete_bounds): Fix typo.
-
-Thu Oct 19 12:15:37 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * defs.h (SEEK_SET, SEEK_CUR): Add default definitions.
- * dbxread.c, mdebugread.c, os9kread.c (SEEK_SET, SEEK_CUR):
- Remove default definitions.
-
- * Makefile.in (CC-LD): Rename to CC_LD, so MPW xform works.
- (MMALLOC_SRC): Define.
- (MMALLOC_CFLAGS): Use.
- (ser-mac.o): Add rule.
- * dwarfread.c, somread.c, ultra3-nat.c, xcoffread.c: Replace L_SET
- with SEEK_SET in all calls to bfd_seek.
- * scm-tags.h (scm_tags): Remove excess comma.
-
- * mpw-config.in: Adapt to work with autoconf'ed configury;
- build config.h, add empty definitions to mk.tmp.
- (powerpc-apple-macos): Make it work.
- * mpw-make.sed: New file, sed commands to translate Unix makefile
- into MPW syntax.
- * mpw-make.in: Remove.
- * mac-gdb.r: New file, was macgdb.r, renamed for consistency
- with other tools, now includes cfrg resource.
- * macgdb.r: Remove.
- * config/m68k/xm-mpw.h: Remove most of contents, replace with
- include of include/mpw/mpw.h.
-
-Tue Oct 17 10:38:53 1995 Jeffrey A Law (law@cygnus.com)
-
- * hppa-tdep.c (frame_chain): Fix more obscure problems caused
- by system calls that core dump processes without saving all
- the register state.
-
- * config/pa/hppahpux.mt (XDEPFILES): Remove bogus definition.
- * config/pa/hppapro.mt (XDEPFILES): Likewise.
-
-Tue Oct 17 08:04:26 1995 Fred Fish <fnf@rtl.cygnus.com>
-
- * NEWS: Fix typo.
-
-start-sanitize-sh3e
-Mon Oct 16 18:24:03 1995 Jim Wilson <wilson@chestnut.cygnus.com>
-
- * config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): Return builtin_type_float
- for FP registers.
- (REGISTER_NAMES): Add FP register names. Remove ticks, stalls, cycles,
- insts, plr, and tlr.
- (NUM_REGS, NUM_REALREGS): Increase from 23 to 41.
- (FPUL_REGNUM, FP0_REGNUM): New macros.
-
-end-sanitize-sh3e
-Mon Oct 16 11:27:06 1995 Stu Grossman (grossman@cygnus.com)
-
- * remote-mips.c: Add support for speedy (about 10x faster)
- downloads.
-
- * remote-array.c: Move baud_rate initialization from
- _initialize_array to array_open. It was forcing the baud rate of
- all targets to be 4800 baud! Seems like I've fixed this before...
- * config/mips/idt.mt (TDEPFILES): Remove remote-array.o. This
- has *nothing* to do with IDT!!!
-
-start-sanitize-gdbtk
- * gdbtk.c (gdb_disassemble): Use fprintf_unfiltered instead of
- fprintf_filtered.
-end-sanitize-gdbtk
-
- * Makefile.in sh3-rom.c config/sh/sh.mt config/sh/tm-sh.h: Add
- sh3 monitor support.
- * monitor.c: Cleanup regexp compilation stuff to make it easier
- to use several regexps.
- * monitor.h: Get rid of struct rom_cmd_data. It's no longer used.
- * config/m68k/tm-monitor.h: Don't redefine NUM_REGS here. It just
- causes GDB to crash.
-
- * sparcl-tdep.c: Cleanup serial error handling.
-
-Sun Oct 15 16:19:27 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * rs6000-tdep.c: Don't include a.out.h, improve some formatting.
-
-Fri Oct 13 15:27:49 1995 Stu Grossman (grossman@cygnus.com)
-
- * dcache.c: Change default value of remotecache to off. It just
- screws up too many targets.
- * sparcl-stub.c: Add prototypes to many forward decls.
- * Create private copies of strlen, strcpy, and memcpy to prevent
- chaos when user steps into them.
- * (trap_low handle_exception): Clean up DSU support code
- (hardware breakpoints). Move lots of stuff from asm-land to
- C-land (make it much easier to #ifdef if necessary). Also, use
- trap 255 to get into break mode instead of doing a DSU register
- write, which may trash the register.
- * (putpacket): Don't check return value of putDebugChar. It
- returns void...
-
-Fri Oct 13 14:16:17 1995 steve chamberlain <sac@slash.cygnus.com>
-
- * remote-sim.h: Always include callback.h.
- (sim_set_callbacks): New declaration.
-
-Fri Oct 13 10:57:40 1995 Jeffrey A Law (law@cygnus.com)
-
- * somsolib.c (som_solib_add): Just give a warning if a file
- mentioned in the dld_list can't be found.
- * config/pa/tm-hppah.h (FRAME_SAVED_PC_IN_SIGTRAMP): Dig out
- the PC from the PC queues rather than %r31.
-
-Thu Oct 12 13:36:15 1995 Jeffrey A Law (law@cygnus.com)
-
- * corelow.c (core_open): Don't update the to_sections and
- to_sections_end fields in core_ops here. It's too late.
- * irix5-nat.c (solib_add): Update the to_sections and
- to_sections_end fields in core_ops here if needed.
- * osfsolib.c (solib_add): Likewise.
- * rs6000-nat.c (xcoff_relocate_core): Likewise.
- * solib.c (solib_add): Likewise.
- * somsolib.c (solib_add): Likewise.
-
-Wed Oct 11 17:25:59 1995 Fred Fish <fnf@rtl.cygnus.com>
-
- * Makefile.in (VERSION): Bump version to 4.15.1
-
-Tue Oct 10 15:26:39 1995 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (VERSION): Version 4.15 released.
- * README: Updated for version 4.15.
-start-sanitize-gdbtk
- * README.GDBTK: Updated for version 4.15
-end-sanitize-gdbtk
- * NEWS: Updated for 4.15 release.
-
-Tue Oct 10 13:18:50 1995 Fred Fish <fnf@cygnus.com>
-
- * configure.in: Add AC_PROG_YACC
- * configure: Regenerate
- * Makefile.in (BISON): Remove macro definition.
- (YACC): Set from autoconfig.
- (FLAGS_TO_PASS): Remove BISON.
- (TARGET_FLAGS_TO_PASS): Remove BISON.
-
-Tue Oct 10 12:25:11 1995 steve chamberlain <sac@slash.cygnus.com>
-
- * win32-nat.c (child_create_inferior): Pass argv correctly.
- * Makefile.in (win32-nat.o): Add dependencies.
-
-Mon Oct 9 14:36:29 1995 steve chamberlain <sac@slash.cygnus.com>
-
- * NEWS: Add information about win32 and arm code.
- * win32-nat.c: Renamed from win32.c.
- * config/i386/win32.mh: Renamed from config/i386/i386win32.mh.
- * config/i386/win32.mt: Renamed from config/i386/i386win32.mt.
- * config/i386/tm-win32.h: Renamed from config/i386/tm-i386win32.h.
- * config/i386/xm-win32.h: Renamed from config/i386/xm-i386win32.h.
- * configure.in (i[345]86-*-win32): Updated to cope with filename
- changes.
- * configure: Regenerated.
-
-Sun Oct 8 18:01:04 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * ch-exp.y (yylex): Also look for '$' following '$'.
-
-Sat Oct 7 22:52:42 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * ch-exp.y (yylex): Fix typo.
-
-Fri Oct 6 11:56:49 1995 Jim Wilson <wilson@chestnut.cygnus.com>
-
- * remote-sim.c (gdbsim_open): Put callback initializations here.
- (_initalize_remote_sim): Not here.
-
-Fri Oct 6 17:08:49 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * top.c (execute_control_command): Use 0/1 instead of BFD's
- true/false.
-
-Fri Oct 6 14:43:19 1995 Stu Grossman (grossman@cygnus.com)
-
- * sparcl-stub.c: Include sparclite.h to get access to register
- fondling macros.
- * (trap_low): Save and restore FP regs if necessary. Also, clean
- up save and restore of debug unit regs.
- * (hard_trap_info): Add more architecturally defined traps.
- * (set_debug_traps): Only set FP disabled trap if FP is disabled.
- * (get_in_break_mode): Clean up. Get rid of calls to
- set_hw_breakpoint_trap(). Also, use write_asi macro.
- * (handle_exception): Clean up `g' and `G' commands. Add `P'
- command.
- * (hw_breakpoint): Why was this here!? It's gone now...
-
-Fri Oct 6 11:56:49 1995 Jim Wilson <wilson@chestnut.cygnus.com>
-
- * callback.c (fdbad): Fix typo in comment.
- (os_close, os_isatty, os_lseek, os_read, os_write): Use if
- statements rather than || to get correct return value.
- (os_write_stdout): Pass missing first argument to os_write.
- * remote-sim.c: Include callback.h.
- (_initialize_remote_sim): Call sim_set_callbacks and then
- initialize the callbacks.
-
-Thu Oct 5 17:28:09 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * values.c (allocate_repeat_value): Allocate an array type, and
- a value of that type; use that instead of setting VALUE_REPEATED.
- * value.h (struct value): Remove fields repetitions and repeated.
- (VALUE_REPEATED, VALUE_REPETITIONS): Removed, no longer used.
- * c-valprint.c, ch-valprint.c, eval.c, printcmd.c, valops.c,
- value.h, values.c: Simplify, since now VALUE_REPEATED is never
- used.
- * valprint.c (value_print_array_elemen): Removed never-used
- function.
-
-Thu Oct 5 15:14:36 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * parse.c (write_dollar_variable): New function.
-
- * c-exp.y (yylex): Replace code for recognizing '$'
- pseudo-variables with a call to write_dollar_variable.
- Simplify grammar correspondingly.
- * f-exp.y: Likewise.
- * m2-exp.y: Likewise.
- * ch-exp.y: Likewise. (Remove function match_dollar_tokens.)
- * scm-exp.c (scm_lreadr): Call write_dollar_variable to handle '$'.
-
-Thu Oct 5 13:27:30 1995 steve chamberlain <sac@slash.cygnus.com>
-
- * win32.c: New file; support for debugging on windows NT.
- * configure.in: (i[345]86-*-win32): New target.
- * configure: Regnerated.
- * eval.c (evaluate_subexp_standard): Remove unused name.
- * serial.c (gdb_string.h): Include.
- * source.c (value.h): Include.
- * config/i386/i386win32.mh (XDEPFILES): Add win32.o
- * config/i386/i386win32.mt: New.
- * config/i386/tm-i386win32.h: New.
-
-Wed Oct 4 18:41:34 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * expression.h (enum exp_code): Added OP_NAME.
- * expprint.c (print_subexp): Add OP_NAME support.
- * parse.c (length_of_subexp, prefixify_subexp): Likewise.
- * scm-lang.c (scm_unpack, in_eval_c, scm_lookup_name): new function.
- * scm-lang.h: Declare builtin_type_scm; other minor tweaks.
- * values.c (unpack_long): If type is SCM, call scm_unpack.
- * scm-valprint.c (scm_val_print): Use extract_signed_integer,
- instead unpack_long
- * scm-lang.c: More Scheme expression parsing from here ...
- * scm-exp.c: ... to here. New file.
- Also, provide for gdb to evaluate simple constants and names..
- * Makefile.in: Note new scm-exp.{c,o}.
-
-Wed Oct 4 17:23:03 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * gdbtypes.c (get_discrete_bounds): New function.
- (force_to_range_type): Use get_discrete_bounds.
- * gdbtypes.h (get_discrete_bounds): Add declaration.
- * valarith.c (value_bit_index): Generalize to use get_discrete_bounds.
- * ch-valprint.c (chill_val_print): Make (power)sets and bitstring
- support use get_discrete_bounds and generally be more robust.
-
-Tue Oct 3 16:54:56 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote-nrom.c (nrom_ops): Add value for to_thread_alive,
- add comments naming slots.
-
-Mon Oct 2 21:45:44 1995 Jeff Law (law@hurl)
-
- * top.c (build_command_line): Demand arguments for if/while
- commands.
-
-Mon Oct 2 13:08:01 1995 Jason Molenda (crash@phydeaux.cygnus.com)
-
- * Makefile.in (X11_CFLAGS): Set only to @X_INCDIR@.
-
-Sat Sep 30 16:13:36 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * scm-lang.c: Moved Scheme value printing code to ...
- * scm-valprint.c: ... this new file.
- Also major improvements in support for printing SCM values.
- * scm-lang.h: New file.
- * scm-tags.h: New file.
- * Makefile.in: Note new scm-valprint.{c,o}.
-
-Sat Sep 30 09:35:02 1995 Jason Molenda (crash@phydeaux.cygnus.com)
-
- * configure.in: X_INCDIR and X_LIBDIR added.
- * Makefile.in: @X_INCDIR@ and @X_LIBDIR@ added.
- * configure: Regnerated.
-
-Fri Sep 29 02:10:05 1995 steve chamberlain <sac@slash.cygnus.com>
-
- * config/arm/tm-arm.h (FRAME_CHAIN, FRAME_CHAIN_VALID):
- Any pc > LOWESTPC is ok.
-
- * remote-rdp.c (rdp_init): Take out variable baud rate stuff.
- (remote_rdp_detatch): Delete.
- * breakpoint.c (ctype.h): Don't include twice.
-
- * Makefile.in (remote-rdp.o): Doesn't need remote-rdp.h
- * callback.c (os_printf_filtered): fix protos.
- * defs.h (puts_filtered, puts_unfiltered
- [v|f|]printf_[un]filtered): Make format arg const.
- * remote-rdp.c (rdp_init): Attept to sync at different
- baudrates.
- * utils.c (puts_filtered, puts_unfiltered
- [v|f|]printf_[un]filtered): Define prototypes with
- const in the right place.
-
-Thu Sep 28 17:43:39 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * defs.h (enum language): Add language_scm.
- * expression.h (enum exp_code): Added OP_EXPRSTRING.
- * scm-lang.c: Preliminary support for Guile /SCM dialect of Scheme.
- * expprint.c (print_subexp): Add OP_EXPRSTRING support.
- * parse.c (length_of_subexp, prefixify_subexp): Likewise.
- * valops.c (find_function_in_inferior): New function.
- (value_allocate_space_in_inferior): New function.
- (allocate_space_in_inferior): Redefine using previous function.
- * Makefile.in (SFILES): Add scm-lang.c.
- (COMMON_OBS): Add scm-lang.o
-
-Thu Sep 28 14:32:11 1995 steve chamberlain <sac@slash.cygnus.com>
-
- * callback.[ch]: New files.
- * remote-rdp.c: Support for the ARM RDP monitor.
- * Makefile: Update.
- * arm-tdep.c (arm_othernames): New.
- (_initialize_arm_tdep): install 'othernames' command.
- (arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New.
- * configure.in: Check for termios.h, termio.h and sgtty.h.
- (i[345]86-*-win32*): New host.
- * configure: Regenerated.
- * inflow.c: Clean up inclusions.
- * main.c (main): Check for WINGDB, not WIN32.
- * printcmd.c (do_examine): Put QUIT test in loop.
- * remote-hms.c (e7000_load): Delete.
- (hms_ops): Point to generic_load instead.
- * remote-hms.c (hms_ops): Point to generic_load.
- * remote-sim.c (sim_callback_write_stdout): Becomes
- gdbsim_write_stdout.
- (gdbsim_load): Call generic_load.
- * remote-utils.c (gr_load_image): Delete.
- * ser-unix.c (terminal.h): Include instead of havig
- own #if tree.
- (hardwire_flush_input): Reset input buffer too.
- * source.c (openp): If WIN32 then open file in binary mode.
- * terminal.h: Configure IO mechanism using autoconf defines if
- available and not overriden.
- * utils.c (quit, pollquit, notice_quit): WIN32 check becomes
- WINGDB check.
-
- * config/arm/arm.mt (TDEPFILES): Add remote-rdp.o.
- * config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes
- TARGET_BYTE_ORDER_SELECTABLE.
- (ADDR_BITS_REMOVE): New.
- (ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New.
- (INST_xx): New.
- (FRAME_FIND_SAVED_REGS): Pass the right argument.
- (arm_get_next_pc): Declare.
-
-Wed Sep 27 10:14:36 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * valops.c (search_struct_field): Also allow "else" as a variant
- name.
- * eval.c (evaluate_struct_tuple): New function. Used to evaluate
- structure tuples. Now also handles Chill variant records.
- (get_label): New function, used by evaluate_struct_tuple.
- (evaluate_subexp_standard case OP_ARRAY): Use evaluate_struct_tuple.
- (evaluate_labeled_field_init): Removed.
-
- * valops.c (search_struct_field): Generalize to work with Chill
- variant records.
-
-Sat Sep 23 01:22:23 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * mdebugread.c (parse_partial_symbols): Reset includes_used
- and dependencies_used after finishing the partial symbol table.
-
- * rs6000-tdep.c (push_dummy_frame): Handle lr_offset of zero
- correctly.
-
- * rs6000-nat.c (xcoff_relocate_core): Don't relocate data
- addresses for the main objfile if DONT_RELOCATE_SYMFILE_OBJFILE
- is defined.
- * xcoffread.c: gcc -Wall lint. Remove traceback table reading
- code. The existing code tried to add parameter information for
- functions compiled without -g, which cannot be done properly
- for optimized code and produced misleading parameter displays.
- (ef_complaint, eb_complaint): Make a local static copy to avoid
- dependency on coffread.c.
- (read_xcoff_symtab, process_xcoff_symbol, scan_xcoff_symtab):
- Enter C_EXT/C_HIDEXT symbols into the minimal symbol table only.
- (read_xcoff_symtab): Ignore C_STAT section auxiliary entry
- symbols. Complain about unmatched .ef and .eb symbols instead of
- segfaulting.
- (process_xcoff_symbol): Determine value of C_GSYM symbols via
- the global_sym_chain mechanism in stabsread.c.
- (xcoff_new_init): Call stabsread_new_init and buildsym_new_init.
- (init_string_tab): Initialize length field bytes in the strtbl.
- (scan_xcoff_symtab): Skip symbols that start with `$' or `.$'.
- Set first_fun_line_offset for symbols with two auxents only.
-
-Wed Sep 20 21:06:35 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * op50-rom.c (op50n_cmds): Send ".\r" after the interrupt
- character.
-
-Wed Sep 20 13:12:56 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * Makefile.in (maintainer-clean): New target, synonym for
- realclean. Add GNU standard maintainer-clean echos.
- * gdbserver/Makefile.in (maintainer-clean): New target, synonym
- for realclean.
- * nlm/Makefile.in (maintainer-clean): Likewise.
-
-Wed Sep 20 08:16:03 1995 steve chamberlain <sac@slash.cygnus.com>
-
- * defs.h (xmalloc, xrealloc): Delete, they're declared in libiberty.h.
- (GETENV_PROVIDED, FCLOSE_PROVIDED): New.
- * doc/gdbint.texinfo (GETENV_PROVIDED, FCLOSE_PROVIDED): Document.
- * remote-sim.[ch] (sim_callback_write_stdout): New.
-
-Tue Sep 19 15:28:58 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * gdbtypes.c (create_set_type): Set TYPE_LENGTH in bytes, not bits.
- * valops.c (value_bitstring): TYPE_LENGTH is bytes, not bits.
-
- * gdbtypes.c (force_to_range_type): Calculate upper limit of
- TYPE_CODE_CHAR depending on TYPE_LENGTH (instead of just using 255).
-
-Mon Sep 18 01:43:42 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * somsolib.c (auto_solib_add_at_startup): Delete definition. No
- longer needed.
-
-Sat Sep 16 13:23:36 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * config/mips/tm-mips.h (UNUSED_REGNUM): Define.
- * mipsv4-nat.c (supply_gregset): Fill UNUSED_REGNUM register
- with zero.
-
-Thu Sep 14 17:35:24 1995 Stu Grossman (grossman@cygnus.com)
-
- * remote-sim.c (gdbsim_create_inferior): Back out change that
- broke all simulator configurations except the rs6000.
-
-Thu Sep 14 14:44:59 1995 Jeffrey A. Law <law@rtl.cygnus.com>
-
- * monitor.c (monitor_expect): Discard NULL characters.
-
-Thu Sep 14 14:12:30 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * infcmd.c: Add extern declaration for auto_solib_add_at_startup.
-
-Wed Sep 13 13:33:58 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * symfile.c: Move global variable auto_solib_add_at_startup from
- solib.c to symfile.c.
- * solib.c: ditto.
- * symfile.h: Add extern declaration of the above mentioned variable.
- * infcmd.c: Take out extern declaration, since it's in symfile.h.
-
-Thu Sep 14 12:39:35 1995 Stu Grossman (grossman@cygnus.com)
-
- * coffread.c (coff_symtab_read): Complain about unmatched .ef and
- .eb symbols instead of segfaulting.
-
-Wed Sep 13 13:33:58 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * stabsread.c (read_one_struct_field): Use subfile language instead of
- global language. Improve efficiency.
-
-Wed Sep 13 08:45:02 1995 Jeff Law (law@fast.cs.utah.edu)
-
- * somsolib.c (auto_solib_add_at_startup): Define new global variable.
- (som_solib_create_inferior_hook): Don't add libraries if
- auto_solib_add_at_startup is zero.
- (_initialize_som_solib): Add command to toggle
- auto_solib_add_at_startup.
-
-Tue Sep 12 19:37:24 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * monitor.c (monitor_make_srec): Fix thinkos in computation
- of addr_size.
-
-Tue Sep 12 15:46:18 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * stabsread.c (read_one_struct_field): Add a patch to handle cfront
- generated stabs that each field is in full mangled name.
-
- * stabsread.c: To include language.h and expression.h for the reason
- above.
-
- * infcmd.c (attach_command): Add solibs only when
- auto_solib_add_at_startup is set.
-
-Mon Sep 11 17:22:35 1995 Fred Fish <fnf@cygnus.com>
-
- * NEWS: Add information about remote target caching.
-
-Sun Sep 10 15:36:21 1995 Fred Fish <fnf@cygnus.com>
-
- * defs.h: Only include mmalloc.h if NO_MMALLOC is not
- defined.
-
-Sun Sep 10 10:24:48 1995 Michael Tiemann <tiemann@axon.cygnus.com>
-
- * tm-ppc-eabi.h (PC_IN_CALL_DUMMY): Redefine this to work with the
- simulator. FIXME.
-
- * rs6000-tdep.c (push_dummy_frame): Calculate the correct link
- register offset from the current frame (don't assume it is always 8).
- (push_dummy_frame): Add comment about having only 4096 bytes of
- stack space in the simulator (by default).
-
- * remote-sim.c (gdbsim_create_inferior): Call
- `add_text_to_loadinfo' so that gdb can find TOC entries when
- calling functions in the inferior.
-
-Sun Sep 10 09:00:28 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * sparc-tdep.c (fill_fpregset): Fix incorrect FP_MAX_REGNUM
- substitution.
- (supply_fpregset): Use FP_MAX_REGNUM.
-
-Sat Sep 9 08:21:52 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * stabsread.c (read_enum_type): Exit loop for putting pending
- enum symbols into the enum type correctly if we had no pending
- symbols on entry to read_enum_type.
-
-Fri Sep 8 12:57:41 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * inferior.h: Add extern declaration of inferior_environ.
- * solib.c (solib_map_sections): To get inferior's env instead of
- gdb's for LD_LIBRARY_PATH, same for PATH.
-
- * solib.c (solib_map_sections): Copy full path name into so_list
- structure so that symbol_file_add can find it.
-
-Tue Sep 5 17:47:53 1995 Doug Evans <dje@canuck.cygnus.com>
-
- * config/sparc/tm-sp64.h (REGISTER_RAW_SIZE): Lower 32 fp regs
- have size 4.
- (REGISTER_VIRTUAL_SIZE): Likewise.
- (REGISTER_VIRTUAL_TYPE): Lower 32 fp regs have type float.
- Upper 32 fp regs have type double.
- * sparc-tdep.c (NUM_SPARC_FPREGS): Replace with
- (FP_REGISTER_BYTES): this, and update all uses.
- (FP_MAX_REGNUM): Define if not already.
- (get_saved_register): Handle new sparc64 fp regs.
- (sparc_frame_find_saved_regs): Likewise.
- (sparc_print_register_hook): Only print fp regs < 32 as doubles.
- Add code to handle long doubles when gdb does.
- (_initialize_sparc_tdep): Use print_insn_sparc64 if sparc64.
-
-Sat Sep 2 06:41:26 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * configure.in: Explicitly `exit 0' for broken shells.
- * configure: Rebuilt.
-
- * symtab.c (list_symbols): Add missing blank after
- `<function, no debug info>' output.
-
- * valops.c (value_assign): Handle truncation when assigning
- to bitfields. Use value_copy to construct the return value
- from toval.
- * values.c (value_copy): Copy VALUE_FRAME and VALUE_OPTIMIZED_OUT.
-
-Fri Sep 1 08:25:50 1995 James G. Smith <jsmith@beauty.cygnus.com>
-
- * configure (mips64*vr4300*-*-elf): Support added.
- * remote-mips.c (mips_readchar): Change to allow build-time prompt
- string.
- * config/mips/tm-mips.h: Added TARGET_MONITOR_PROMPT.
- * config/mips/{vr4300.mt, vr4300el.mt, tm-vr4300.h,
- tm-vr4300el.h}: Added.
-
-Thu Aug 31 12:48:04 1995 Jim Wilson <wilson@chestnut.cygnus.com>
-
- * config/sh/sh.mt (SIM): Add -lm.
-
-Wed Aug 30 18:10:57 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * rmote-nindy.c (non_dle, nidy_resume, nindy_wait): Changes to
- conform to GNU coding standards.
-
- * solib.c (match_main): Modify to follow GNU coding conventions.
-
-Mon Aug 28 17:07:26 1995 Kung Hsu <kung@lisa.cygnus.com>
-
- * remote.c (remote_wait): Revert 19 July my change which should be
- customer specific.
-
-Sat Aug 26 00:26:11 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * mdebugread.c (parse_symbol): Handle sh.value of zero for enums.
- Determine signedness of enum type from enumerators.
- (parse_type): Handle btIndirect types, handle fBitfield for
- some non-member types.
- (upgrade_type): Use TYPE_FLAG_TARGET_STUB for arrays with
- unknown length.
- (cross_ref): Handle stIndirect forward reference to btTypedef.
-
- * stabsread.c (read_enum_type): Determine signedness of enum
- type from enumerators.
-
- * top.c (execute_command): Remove trailing whitespace from
- command arguments, except for `set' and `complete' commands.
- (validate_comname): Allow underscores in user defined command
- names.
-
- * values.c (modify_field): Change `Value does not fit in %d bits'
- error to a warning. Exclude sign extension bits of negative field
- values from fit check.
-
-Fri Aug 25 11:31:29 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * configure.in (powerpc*-*-eabisim*): Only link in the simulator
- if the target is powerpc{,le}-*-eabisim*, since the simulator
- needs GCC to build.
- * config/powerpc/ppc{,le}-sim.mt: Cloned from ppc{,le}-eabi.mt.
- * config/powerpc/ppc{,le}-eabi.mt: Remove simulator support.
- * config/powerpc/tm-ppc{,le}-sim.mt: Include tm-ppc{,le}-sim.h.
-
-Wed Aug 23 16:55:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * config/powerpc/ppc{,le}-eabi.mt (SIM_OBJS, SIM): Link in the
- PowerPC simulator.
-
-Tue Aug 22 02:00:47 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * tm-hppa.h (EXTRACT_RETURN_VALUE): Fix for FP values.
-
- * tm-hppa.h (STORE_RETURN_VALUE): Fix to work with -msoft-float
- calling conventions too. Use the TYPE of the return value, not
- its length to determine if it should also be copied into the
- floating point registers.
-
- * tm-hppa.h (PROLOGUE_FIRSTLINE_OVERLAP): Delete. Causes more
- problems than it fixes.
- * hppa-tdep.c (skip_prologue): If we exit the main loop without
- finding all the register saves, retry again without looking for
- the registers we could not find the first time.
-
-Mon Aug 21 23:39:56 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * hppa-tdep.c (frame_chain_valid): Handle systems where "$START$"
- calls "main" directly.
- (skip_prologue): Always assume arguments were saved into the stack
- since GCC will do so without setting the magic Args_Saved bit in
- the unwind descriptor.
-
-Mon Aug 21 11:49:17 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * remote-udi.c (udi_wait): Mask off high bits of stop reason.
- * remote-udi.c (fetch_register): For unfetchable regs, pretend it's
- done. Fix a bug.
-
-Mon Aug 21 00:45:17 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * Makefile.in (install): Remove "brokensed" hack, unnecessary now
- that we're using autoconf.
- (uninstall): Likewise.
-
-start-sanitize-gdbtk
-Sat Aug 19 17:20:22 1995 Michael Tiemann <tiemann@axon.cygnus.com>
-
- * gdbtk.tcl: ENABLE comes back as "1" or "0", not "enable" or
- "disable".
- Also, wire up the breakpoint window so that it can be demo'd.
-end-sanitize-gdbtk
-
-Sat Aug 19 01:19:34 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * gdbtypes.c (recursive_dump_type): Add dont_print_type_obstack
- to inhibit infinite recursion when printing aggregate types.
-
-Fri Aug 18 17:48:55 1995 steve chamberlain <sac@slash.cygnus.com>
-
- * dcache.c (dcache_write_line): Write dirty lines right.
-
-Fri Aug 18 06:26:56 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * sparc-tdep.c (isbranch): Fix typo which caused wrong
- target addresses for annulled branches.
-
-Wed Aug 16 21:54:39 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * config/pa/tm-hppa.h (PROLOGUE_FIRSTLINE_OVERLAP): Define.
-
-Tue Aug 15 07:51:21 1995 steve chamberlain <sac@slash.cygnus.com>
-
- * remote.c (remote_write_bytes): Chop up large transfers.
-
-Mon Aug 14 17:56:36 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * gcc.patch: Remove, relevant only to long-ago versions of GCC.
-
-Mon Aug 14 13:43:01 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * config/sparc/tm-sparclite.h: Define FRAME_CHAIN_VALID_ALTERNATE.
- * blockframe.c (inside_main_func): If main func addr range not set,
- try to set it now.
-
-Sat Aug 12 15:34:54 1995 Jeffrey A. Law <law@rtl.cygnus.com>
-
- * config/powerpc/xm-aix.h (FIVE_ARG_PTRACE): Define.
- * config/rs6000/xm-rs6000.h (FIVE_ARG_PTRACE): Likewise.
-
- * configure.in: Recognize aix4 specially as some aspects
- of aix4 need different handling than aix3.
- * configure: Updated.
- * config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: New files
- specific to aix4 support on the power pc.
- * config/powerpc/tm-ppc-aix.h (DONT_RELOCATE_SYMFILE_OBJFILE): Do
- not defined. The aix4 specific target files will do that.
- * config/rs6000/{aix4,mh,aix4,mt,tm-rs6000-aix4.h}: New files
- specific to aix4 support on the rs6000.
-
- * config/rs6000/tm-rs6000.h (CONVERT_FROM_FUNC_PTR_ADDR): Don't
- do the conversion if the pointer is not a magic aix function
- pointer.
- * rs6000-tdep.c: Include objfiles.h and symtab.h.
- (is_magic_function_pointer): New function.
-
- * rs6000-tdep.c (skip_prologue): Refine check for frameless
- functions. Handle b .+4 emitted by aix4 compilers. Only
- allow one load of a minimal toc pointer. Handle aix4 compiler's
- code for alloca.
-
- * rs6000-tdep.c (find_toc_address): Report an error if no toc was
- found rather than possibly core dumping.
-
- * partial-stab.h: Handle extra field generated by the aix4 compiler
- for enumerations.
- * stabsread.c (read_enum_type): Likewise.
-
-Sat Aug 12 03:18:04 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * rs6000-tdep.c (extract_return_value): Fix returning of values
- whose length is less than the register size for big endian targets.
-
-Fri Aug 11 13:04:32 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * symtab.c (list_symbols): if break command set breakpoint on
- matched symbol.
-
-Wed Aug 9 18:59:05 1995 Fred Fish <fnf@cygnus.com>
-
- * defs.h (strchr, strrchr, strstr, strtok, strerror): Enclose in
- #ifndefs to protect against previous definitions as macros.
-
-Wed Aug 9 14:51:36 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * xcoffread.c (xcoff_symfile_offset): Revert an unwanted change
- that got in accidentally with Aug 1 change.
-
-Sat Aug 5 09:07:28 1995 steve chamberlain <sac@slash.cygnus.com>
-
- * remote-hms.c (hms_cmds): Get reg term right.
- * monitor.c (monitor_fetch_register): If we see
- a non-hex digit, just stop reading.
- * remote.c (remote_wait): Change way $O is handled.
-
-Wed Aug 9 11:42:36 1995 Jeffrey A. Law <law@rtl.cygnus.com>
-
- * configure.in (powerpc-*-aix*): Recognize as a new gdb host
- and target.
- (powerpc-*-eabi*): Don't set configdirs.
- (powerpcle-*-eabi*): Likewise.
- * configure: Updated.
- * rs6000-nat.c (vmap_ldinfo): Don't relocate data addresses
- for the main objfile if DONT_RELOCATE_SYMFILE_OBJFILE is
- defined.
- * config/powerpc/{aix.mh,aix.mh}: Host and target makefile fragments
- for powerpc running aix4.
- * config/powerpc/{nm-aix.h, tm-ppc-aix.h, xm-aix.h}: Native, target
- and host include files for powerpc running aix4.
-
-Wed Aug 9 08:11:45 1995 Stan Shebs <shebs@cygnus.com>
-
- * top.c (target_output_hook): Really make it match defs.h (char *
- is not the same as unsigned char *).
-
-Tue Aug 8 15:13:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * Makefile.in (CXX_FOR_TARGET): Don't use ${rootme}/../gcc/xgcc
- unless it is present.
-
-Tue Aug 8 10:50:15 1995 Jeffrey A. Law <law@rtl.cygnus.com>
-
- * top.c (target_output_hook): Make declaration match the one
- in defs.h.
-
- * symfile.c (add_psymbol_to_list): Initialize SYMBOL_SECTION.
- (add_psymbol_addr_to_list): Likewise.
- * symfile.h (ADD_PSYMBOL_VT_TO_LIST): Likewise.
-
-Mon Aug 7 15:34:29 1995 steve chamberlain <sac@slash.cygnus.com>
-
- * top.c (target_output_hook): New definition.
- * stack.c (gdb_string.h): Include after defs.h
- * defs.h (target_output_hook): New declaration.
- * source.c (mod_path): Fix Win32 \ handling.
-
-Sun Aug 6 22:14:25 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * hppa-tdep.c (frame_saved_pc): Don't try to dig a return pointer
- out of a long branch stub.
-
-Fri Aug 4 13:37:31 1995 Jeffrey A. Law <law@rtl.cygnus.com>
-
- * xcoffread.c (process_linenos): Fix typo in last change.
-
-Thu Aug 3 22:01:26 1995 Fred Fish <fnf@rtl.cygnus.com>
-
- * ch-exp.y (write_lower_upper_value): Add prototype so bison
- generated parser will insert prototype before first func usage.
- Bison and byacc order the output sections differently. Also
- make function static.
-
-Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
-
- * Update all FSF addresses except those in COPYING* files.
-
-Thu Aug 3 01:38:45 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * config/alpha/tm-alpha.h (EXTRA_FRAME_INFO): Add pc_reg field.
- (SKIP_TRAMPOLINE_CODE): Define.
- * alpha-tdep.c (alpha_frame_saved_pc): Use pc_reg field from
- frame to find the saved pc register.
- (alpha_saved_pc_after_call): Skip over shared library trampoline
- before trying to find the saved pc register.
- (find_proc_desc): Copy PROC_PC_REG from found proc_desc
- to heuristic proc_desc.
- (init_extra_frame_info): Initialize pc_reg field in frame.
-
-Wed Aug 2 18:00:36 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * configure.in (m68*-est-*): Use monitor target config.
- * configure: Update.
- * config/m68k/est.mt, config/m68k/tm-est.h: Delete.
- * config/m68k/monitor.mt, config/m68k/tm-monitor.h: Fix comments.
-
-Tue Aug 1 22:52:53 1995 Fred Fish <fnf@cygnus.com>
-
- * Makefile.in (VERSION): Bump to 4.14.2
-
-Tue Aug 1 16:04:36 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * xcoffread.c (process_linenos): The value in include file symbol
- should point to line number table. Currently this value is not
- set correctly by AIX ld. A fix to get around this bug.
-
-Tue Aug 1 11:44:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * configure.in: Check for working mmap, ansi headers, string.h,
- strings.h, and memory.h.
- * configure: Regenerated.
-
- * gdb_stat.h: New file, "portable" <sys/stat.h>.
- * gdb_string.h: New file, "portable" <string.h>.
-
- * altos-xdep.c, arm-tdep.c, arm-xdep.c, convex-tdep.c,
- convex-xdep.c, coredep.c, cxux-nat.c, dbxread.c, exec.c,
- gould-xdep.c, hppa-tdep.c, i386aix-nat.c, i386b-nat.c,
- i386mach-nat.c, i386v-nat.c, infptrace.c, m88k-nat.c, main.c,
- mdebugread.c, objfiles.c, os9kread.c, procfs.c, pyr-xdep.c,
- rs6000-nat.c, source.c, standalone.c, stuff.c, sun386-nat.c,
- symfile.c, symm-nat.c, symm-tdep.c, symtab.c, top.c, ultra3-nat.c,
- ultra3-xdep.c, umax-xdep.c, xcoffread.c: Include "gdb_stat.h"
- instead of <sys/stat.h>.
-
- * alpha-tdep.c, breakpoint.c, buildsym.c, c-typeprint.c,
- ch-typeprint.c, coffread.c, command.c, core-sol2.c, core-svr4.c,
- core.c, corelow.c, cp-valprint.c, dbxread.c, dcache.c, demangle.c,
- dpx2-nat.c, dstread.c, dwarfread.c, elfread.c, environ.c, eval.c,
- exec.c, f-lang.c, f-typeprint.c, f-valprint.c, findvar.c,
- fork-child.c, gdbtypes.c, hpread.c, i386-tdep.c, infcmd.c,
- inflow.c, infptrace.c, infrun.c, irix5-nat.c, language.c,
- m2-typeprint.c, main.c, mdebugread.c, minsyms.c, mipsread.c,
- monitor.c, nlmread.c, objfiles.c, os9kread.c, osfsolib.c, parse.c,
- printcmd.c, procfs.c, regex.c, remote-adapt.c, remote-arc.c,
- remote-array.c, remote-bug.c, remote-e7000.c, remote-eb.c,
- remote-es.c, remote-hms.c, remote-mm.c, remote-os9k.c,
- remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c,
- remote-utils.c, remote-vx.c, remote-vx29k.c, remote-vx68.c,
- remote-vx960.c, remote-vxmips.c, remote-vxsparc.c, remote.c,
- solib.c, somread.c, source.c, stabsread.c, stack.c, symfile.c,
- symmisc.c, symtab.c, target.c, top.c, typeprint.c, utils.c,
- valarith.c, valops.c, valprint.c, values.c, xcoffread.c: Include
- "gdb_string.h" instead of <string.h>.
-start-sanitize-gdbtk
- * gdbtk.c: Likewise.
-end-sanitize-gdbtk
-
- * config/xm-sysv4.h, i386/xm-ptx.h, m68k/xm-sun3os4.h,
- sparc/xm-sun4os4.h (HAVE_MMAP): Removed.
-
- * config/xm-lynx.h, config/i386/xm-ptx.h,
- config/m68k/nm-apollo68b.h, config/m68k/xm-hp300hpux.h,
- config/mips/xm-irix3.h, config/mips/xm-mips.h,
- config/mips/xm-news-mips.h, config/mips/xm-riscos.h,
- config/pa/hppah.h, config/rs6000/xm-rs6000.h,
- config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h,
- config/vax/xm-vaxbsd.h, config/vax/xm-vaxult.h,
- config/vax/xm-vaxult2.h (MEM_FNS_DECLARED): Removed.
- * config/mips/xm-irix3.h, config/mips/xm-mips.h,
- config/pa/xm-hppah.h (memcpy, memset): Removed declarations.
-
-Tue Aug 1 02:08:30 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * mips-tdep.c (mips_extract_return_value): Fix returning of
- values whose length is less than the register size for big endian
- targets.
- * alpha-tdep.c (alpha_extract_return_value,
- alpha_store_return_value): Use alpha_convert_register_to_*
- to handle functions returning "float" correctly.
-
-Mon Jul 31 19:12:48 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * h8500-tdep.c: General linting and cleanup.
- (opcodes/h8500-opc.h): Don't include.
- (code_size, data_size): Make static.
- (frame_locals_address, frame_args_address): Remove.
- (h8300_pop_frame): Rename to h8500_pop_frame.
- (big_command, medium_command, compact_command, small_command):
- Define as regular functions rather than with macro trickery.
- (tm_print_insn): Set to correct disassembler function.
- * config/h8500/tm-h8500.h: Minor cleanup, add prototypes.
- (ABOUT_TO_RETURN): #if 0 out.
- (FRAME_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS): Use usual define.
- (GDB_TARGET_IS_H8500): Remove duplicate definition.
- (regoff): Remove, never used.
- * config/h8500/h8500.mt (TDEPFILES): Add monitor.o.
-
-Mon Jul 31 14:32:30 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * configure.in: Check for unistd.h.
- * configure: Regenerated.
-
- * command.c, cp-valprint.c, fork-child.c, i386-tdep.c,
- i386b-nat.c, inflow.c, main.c, maint.c, objfiles.c, solib.c,
- source.c, stack.c, symfile.c, top.c, utils.c: Include strings.h
- and/or unistd.h to bring prototypes into scope.
-
-Sun Jul 30 01:40:11 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * rs6000-tdep.c (frame_saved_pc): Check for signal handler caller
- before trying to determine the start of the function.
- (skip_prologue): Skip subroutine call which might save the
- floating point registers only if it is within the first three
- instructions.
- Reinstate setting of alloca_reg if setup of a gcc frame pointer
- is found.
- (frame_get_cache_fsr): Use new fields in rs6000_framedata.
-
-Sat Jul 29 14:43:35 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * sparclite: Removed subdirectory. aload and eload are now in
- utils/sparclite, low-level library is in libgloss.
- * configure.in (sparclite*): Don't configure sparclite subdir.
- * configure: Update.
- * Makefile.in (TARDIRS): Remove, no longer used.
-
-Sat Jul 29 01:45:56 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * procfs.c (unconditionally_kill_inferior): Clear current signal
- if PROCFS_NEED_CLEAR_CURSIG_FOR_KILL is defined.
- * config/alpha/nm-osf3.h (PROCFS_NEED_CLEAR_CURSIG_FOR_KILL): Define.
-
- * alpha-tdep.c: Move sigtramp handling of saved registers from
- read_next_frame_reg to alpha_find_saved_regs, handle saved
- floating point registers.
- * mips-tdep.c: Move sigtramp handling of saved registers from
- read_next_frame_reg to mips_find_saved_regs, handle saved
- floating point registers.
- * config/mips/tm-irix3.h, config/mips/tm-irix5.h,
- config/mips/tm-mipsv4.h (SIGFRAME_FPREGSAVE_OFF): Define.
-
- * sparc-tdep.c (sparc_pc_adjust): Fix check for `unimp'
- instruction to handle functions returning structures with
- large sizes properly.
-
-Fri Jul 28 11:50:17 1995 steve chamberlain <sac@slash.cygnus.com>
-
- * configure, configure.in (z8k-*-sim): deleted.
-
-Thu Jul 27 12:49:28 1995 Jeffrey A. Law <law@rtl.cygnus.com>
-
- * lynx-nat.c (child_wait): Handle threads exiting.
-
-Thu Jul 27 07:47:50 1995 Michael Meissner <meissner@cygnus.com>
-
- * rs6000-tdep.c (skip_prologue): Don't assume the update stack
- instruction is the last in the prologue, since xlc stores the lr
- after the stack update. Make sure offset is correct sign for
- large frames.
- (frame_saved_pc): Move test for signal before frameless.
-
- * config/rs6000/tm-rs6000.h (DEFAULT_LR_SAVE): Define.
- * config/powerpc/tm-ppc-eabi.h (DEFAULT_LR_SAVE): Redefine.
-
-Thu Jul 27 01:22:08 1995 Jeffrey A. Law <law@rtl.cygnus.com>
-
- * hppa-tdep.c (hppa_fix_call_dummy): Rewrite code for calling
- into shared libraries.
-
-Wed Jul 26 23:33:34 1995 Michael Meissner <meissner@cygnus.com>
-
- * config/rs6000/tm-rs6000.h (rs6000_framedata): Add offsets the
- gprs, fprs, lr, and cr is stored at.
- (FRAME_FIND_SAVED_REGS): Use new fields in rs6000_framedata.
- (function_frame_info): Delete declaration.
- (SKIP_PROLOGUE): Skip_prologue is now passed a rs6000_framedata
- structure to fill in.
- (FRAMELESS_FUNCTION_INVOCATION): Function now longer takes a
- second argument.
- (FRAME_SAVED_PC): Call frame_saved_pc.
-
- * rs6000-tdep.c (skip_prologue): Recognize V.4 prologues as well
- as AIX style. Fill in rs6000_framedata structure. Remember where
- the gprs, fprs, cr, and lr are saved.
- (pop_frame): Use skip_prologue, not function_frame_info, and use
- new rs6000_framedata fields.
- (function_frame_info): Function deleted.
- (frameless_function_invocation): Separate frame_saved_pc support
- to new function. Recognize V.4 frames.
- (frame_saved_pc): New function.
- (frame_get_cache_fsr): Use skip_prologue, not function_frame_info.
- (frame_initial_stack_address): Ditto.
-
-Wed Jul 26 01:00:37 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * remote.c: Add documentation for extended protocol operations
- and for thread_alive change from a couple weeks ago.
- (extended_remote_ops): Declare and define a new target vector
- for the extended remote protocol.
- (extended_remote_restart): New function to restart the remote
- server & process.
- (remote_open): Just a stub routine.
- (extended_remote_open): New function to start a remote session
- using the extended gdb remote protocol.
- (remote_open_1): New function containing code common to both
- remote_open and extended_remote_open.
- (remote_mourn, extended_remote_mourn, remote_mourn_1): Similarly.
- (extended_remote_create_inferior): New function for the extended
- remote target.
- (initialize_remote): Add the extended_remote_ops target vector.
- * gdbserver/server.c (main, case '!'): Set extended_protocol.
- (main, case 'k'): If the extended protocol is in use, kill the
- inferior then start a new one.
- (main, case 'R'): New command to restart the remote server and
- inferior process. Only supported when using the extended
- protocol.
- (main, server loop): If the inferior terminates while using the
- extended protocol then start a new one. If getpkt fails when
- using the extended protocol then exit.
-
-Tue Jul 25 11:43:44 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * mdebugread.c (psymtab_to_symtab_1): Relocate encoded stab
- line numbers using the psymtab's section offsets.
-
-Tue Jul 25 10:43:27 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * config/rs6000/tm-rs6000.h (rs6000_framedata): Rename from
- aix_framedata. Change all uses.
- * rs6000-tdep.c: Change all aix_framedata -> rs6000_framedata.
-
-Sat Jul 22 23:44:18 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * defs.h (ATTR_FORMAT): Disable if ANSI_PROTOTYPES is not defined.
-
-Fri Jul 21 16:50:28 1995 Jeffrey A. Law <law@rtl.cygnus.com>
-
- * lynx-nat.c (child_thread_alive): New function. Somehow I
- forgot to check this in with all the other thread_alive changes.
-
-Thu Jul 20 22:22:34 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * somread.c (som_symtab_read): Add unsatisfied common symbols to
- the minimal symbol table. All common symbols are "unsatisfied"
- when -E is passed to the linker.
-
-Thu Jul 20 15:04:57 1995 Fred Fish <fnf@cygnus.com>
-
- * top.c (show_endian): Cast first arg of printf_unfiltered to
- correct type of "char *".
-
-Thu Jul 20 14:18:51 1995 Jeffrey A. Law <law@rtl.cygnus.com>
-
- * lynx-nat.c (child_wait): A thread_id of zero from wait apparently
- means the process is single threaded, so there's no need to add
- it to the thread list. Handle case where multi-threaded process
- reverts back to a single-threaded process.
-
- * gdbserver/low-hppabsd.c: Remove error declaration.
- * gdbserver/low-sparc.c: Likewise.
- * gdbserver/low-sun3.c: Likewise.
- * gdbserver/server.h: Remove error and fatal declaration.
- * gdbserver/utils.c (error): Update to be compatable with recent
- changes in defs.h.
- (fatal): Likewise.
-
-Wed Jul 19 22:42:43 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * config/m68k/tm-m68kv4.h (DWARF_REG_TO_REGNUM): Define to
- correctly map floating point registers numbers.
-
- * dwarfread.c (locval, new_symbol): Handle variables that are
- optimized out.
-
- * mdebugread.c: Replace all uses of builtin_type_* with
- mdebug_type_*. Define and initialize mdebug_type_*.
-
- * serial.h (serial_close): Add additional argument `really_close'.
- (SERIAL_CLOSE): Update serial_close call accordingly.
- (SERIAL_UN_FDOPEN): Use serial_close to handle refcnt properly.
- * serial.c (serial_close): Handle `really_close'.
- * serial.h (scb_base): Moved to serial.c, made static.
-
- * valops.c (value_addr): Don't coerce arrays.
- (typecmp): Coerce arrays instead of calling value_addr if necessary.
-
-Wed Jul 19 18:19:28 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- From Richard Earnshaw (rearnsha@armltd.co.uk):
- * infrun.c (wait_for_inferior): Set the convenience variable
- $_exitcode to the termination code of the inferior.
- * top.c (quit_command): Accept optional expression to use
- as parameter to exit().
-
-Wed Jul 19 13:15:32 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * remote.c (remote_wait): When getting registers, check endianess and
- do conversion if necessary.
-
-Tue Jul 18 00:41:31 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * gdbserver/low-hppabsd.c: New file.
- * gdbserver/Makefile.in (SFILES): Add low-hppabsd.c.
- * config/pa/hppabsd.mh (XDEPFILES): Add ser-tcp.o.
- (GDBSERVER_DEPFILES): Add low-hppabsd.o.
- * config/pa/hppaosf.mh: Likewise.
-
-Mon Jul 17 21:35:18 1995 Fred Fish <fnf@cygnus.com>
-
- * dache.c (struct dcache_block): Change data member from unsigned
- char to char, since everything passed in and out of dcache is char
- or casted to appropriate type anyway.
- (dcache_alloc): Move assignment of db out of test and combine
- separate tests into if-else.
- (dcache_peek_byte): Change ptr from unsigned char* to char*.
- (dcache_peek_byte): Remove now unnecessary cast in read_memory call.
- (dcache_peek): Change cast of incoming data arg.
- (dcache_poke): Change cast of addr of incoming data arg.
- (dcache_info): Mask data passed to printf_filtered to lsbyte only.
- (dcache_info): Change printf_filtered arg from "% 2x" to " %2x".
- * target.c (debug_to_thread_alive): Change return type to int and
- return zero, for type compatibility with other *_thread_alive
- funcs.
- (cleanup_target): Change cast of ignore function to match type of the
- to_thread_alive member.
- * defs.h (error_hook): Add ATTR_NORETURN.
- * defs.h (NORETURN, ATTR_NORETURN): Switch from volatile to
- __attribute__ method with gcc 2.7, to avoid gcc 2.6.3 bug.
- * remote.c (remote_wait): Cast first arg to strtol, strchr, and
- strncmp to "const char *" from "unsigned char *".
- (remote_wait): Cast arg to putpkt and strcpy from "unsigned char *"
- to "char *".
- (remote_wait): Change printf format for long arg from "%d" to "%ld".
- (getpkt): Remove unused variable "bp".
- (remote_fetch_word, remote_store_word): Ifdef out apparently unused
- functions.
- * breakpoint.c (watchpoint_check): Removed unused variables
- "saved_level" and "saved_frame".
- * valops.c (value_arg_coerce): Add other enum TYPE_CODE_* and
- default cases to switch for completeness.
- * infrun.c (wait_for_inferior): Enclose "have_waited" label
- in #ifdef that matches the one in which it is referenced.
- * ser-unix.c (hardwire_noflush_set_tty_state): Enclose otherwise
- unused variable "state" in #ifdef that matches one in which it is
- referenced.
- * eval.c (evaluate_subexp_standard): Remove unused variable "var".
- * eval.c (evaluate_subexp_standard): Remove unused variable
- "tmp_symbol".
- * valarith.c (value_subscript): Remove unused variable
- "lowerbound", which is redeclared in a nested scope prior to use.
- * printcmd.c (print_frame_nameless_args): Use "%ld" to print long
- arg, not "%d".
- * {mem-break.c, remote-pa.c, remote.c, saber.suppress}:
- Remove unused static var "check_break_insn_size".
- * buildsym.c (finish_block): Add other enum LOC_* and default
- cases to switch for completeness.
- ch-lang.c (type_lower_upper): Removed unused label "retry".
- Add other enum TYPE_* and default cases to switch for completeness.
- * f-typeprint.c (f_type_print_args): Ifdef out unused function
- that may be used someday when Fortran support is complete.
- * ch-valprint.c (chill_print_type_scalar): Add other enum
- TYPE_* and default cases to switch for completeness.
- (chill_val_print): Remove unused local var "high_bound" that
- is redeclared in a nested scope prior to use.
- (chill_var_print): Use "%ld" to print long arg, not "%d".
- * regex.c (re_compile_fastmap, re_match_2): Add remaining enum
- types and default to switches for completeness.
- * minsyms.c (lookup_minimal_symbol_text): Delete unused variable
- "trampoline_symbol".
- (prim_record_minimal_symbol_and_info): Return NULL rather than
- trash.
- * elfread.c (elf_symtab_read): Don't dereference NULL returns from
- record_minimal_symbol_and_info.
- * f-lang.c (saved_function_list_end): Ifdef out unused variable
- that may be used someday.
- * f-valprint.c (f_val_print): Remove unused local "straddr".
-
-Mon Jul 17 13:08:00 1995 Ian Lance Taylor <ian@cygnus.com>
-
- * stabsread.h (struct stab_section_list): Define.
- (coffstab_build_psymtabs): Remove staboff and stabsize parameters.
- Add textaddr, textsize, and stabs parameters.
- * gdb-stabs.h (struct dbx_symfile_info): Remove text_sect field.
- Add text_addr and text_size fields.
- (DBX_TEXT_SECT): Don't define.
- (DBX_TEXT_ADDR, DBX_TEXT_SIZE): Define.
- * coffread.c: Include <ctype.h>.
- (struct coff_symfile_info): Remove stabsect and stabindexsect
- fields. Add textaddr, textsize, and stabsects fields.
- (coff_locate_sections): Record the address of the .text section,
- and total the sizes of all sections with names beginning with
- ".text". Don't bother to record a .stab.index section (COFF
- doesn't use them). Make a linked list of all sections with names
- beginning with ".stab".
- (coff_symfile_read): Adjust call to coffstab_build_psymtabs for
- new parameters.
- * dbxread.c (dbx_symfile_read): Use DBX_TEXT_ADDR and
- DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
- (dbx_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
- DBX_TEXT_SECT.
- (elfstab_build_psymtabs): Likewise.
- (stabsect_build_psymtabs): Likewise.
- (symbuf_sections, symbuf_left, symbuf_read): New static variables.
- (fill_symbuf): If symbuf_sections is not NULL, read symbols from
- multiple sections.
- (coffstab_build_psymtabs): Remove staboffset and stabsize
- parameters. Add textaddr, textsize, and stabsects parameters.
- Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not DBX_TEXT_SECT. Handle
- multiple stabs sections.
- * os9kread.c (os9k_symfile_read): Use DBX_TEXT_ADDR and
- DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
- (os9k_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
- DBX_TEXT_SECT.
-
- * remote-vx.c (vx_ops, vx_run_ops): Initialize new to_thread_alive
- field.
-
-Sat Jul 15 01:02:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: New files
- for OSF/1-3.x procfs support.
- * configure.in (alpha-dec-osf): Use them when configuring
- for OSF/1-3.x.
- * configure: Updated.
- * target.c: Include <string.h>.
-
-Fri Jul 14 16:16:56 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * Makefile.in, configure.in: Use one variable, frags, to hold
- pathnames of makefile fragments.
- * configure: regenerated.
-
-Fri Jul 14 09:49:47 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * procfs.c (procfs_ops): Fix typo in last change.
-
-Thu Jul 13 13:42:38 1995 Jeffrey A. Law <law@rtl.cygnus.com>
-
- * inftarg.c (child_thread_alive): New function to see if a
- particular thread is still running.
- (child_ops): Add child_thread_alive entry.
- * remote.c (remote_thread_alive): New function to see if a
- particular thread is still alive.
- (remote_ops): Add remote_thread_alive.
- * target.c (dummy_target): Add dummy entry for thread_alive.
- (cleanup_target): de_fault thread_alive too.
- (update_current_target): INHERIT thread_alive too.
- (debug_to_thread_alive): New function.
- (setup_target_debug): Add debug_to_thread_alive.
- * target.h (struct target_ops): Add to_thread_alive.
- (target_thread_alive): Define.
- * thread.c (info_threads_command): Don't call kill; use
- target_thread_alive instead.
- * config/nm-lynx.h (CHILD_THREAD_ALIVE): Define.
- * gdbserver/low-lynx.c (mythread_alive): New function.
- (mywait): Don't restart any threads after a new thread notification,
- let the generic code handle it.
- * gdbserver/low-sparc.c (mythread_alive): Dummy version.
- * gdbserver/low-sun3.c (mythread_alive): Likewise.
- * gdbserver/server.c (main): Handle thread_alive requests.
- * gdbserver/server.h (mythread_alive): Declare.
- * corelow.c (core_ops): Add dummy entry for thread_alive.
- * exec.c (exec_ops): Likewise.
- * m3-nat.c (m3_ops): Likewise.
- * monitor.c (monitor_ops): Likewise.
- * procfs.c (procfs_ops): Likewise.
- * remote-arc.c (arc_ops): Likewise.
- * remote-array.c (array_ops): Likewise.
- * remote-e7000.c (e7000_ops): Likewise.
- * remote-es.c (es1800_ops, es1800_child_ops): Likewise.
- * remote-mips.c (mips_ops): Likewise.
- * remote-pa.c (remote_hppro_ops): Likewise.
- * remote-sim.c (gdbsim_ops): Likewise.
- * sparcl-tdep.c (sparclite_ops): Likewise.
-
-Tue Jul 11 11:15:55 1995 Kung Hsu <kung@rtl.cygnus.com>
-
- * solib.c: Add _DYNAMIC__MGC base symbol for Mentor Graphics Inc.
- * solib.c (match_main): New function for checking name of main.
- * solib.c (solib_add): Not to add if solib match main.
-
-Fri Jul 7 14:41:56 1995 Kung Hsu <kung@rtl.cygnus.com>
-
- * elfread.c (elf_symtab_read): Fix a bug ignoring compiler
- generated internal labels ($LM...).
-
-Wed Jul 5 11:38:36 1995 Kung Hsu <kung@rtl.cygnus.com>
-
- * defs.h: if __GO32__ or WIN32 the directory separating symbol should
- be '\' not '/'.
-
- * remote-nindy (nindy_wait): Use infinite timeout reading after
- esacpe character.
-
-Tue Jul 4 10:30:22 1995 Jeffrey A. Law <law@rtl.cygnus.com>
-
- * infrun.c (wait_for_inferior): When switching from one thread to
- another, save infrun's state for the old thread and load infrun's
- previous state for the new thread.
- * thread.c (struct thread_info): Add new fields for thread specific
- state saved/restored in infrun.c.
- (add_thread): Initialize new fields.
- (load_infrun_state): New function.
- (save_infrun_state): New function.
- * thread.h (load_infrun_state): Provide external decl.
- (save_infrun_state): Likewise.
-
- * infrun.c (wait_for_inferior): When we hit a breakpoint for the
- wrong thread, make sure to write the fixed PC value into the thread
- that stopped. Restart all threads after single stepping over a
- breakpoint for a different thread.
- * breakpoint.c (set_momentary_breakpoint): Make momentary
- breakpoints thread specific in a multi-threaded program.
- * lynx-nat.c (child_resume): Add some comments. Correctly
- choose between the single and multi-threaded step and continue
- ptrace calls.
-
-Fri Jun 30 16:15:36 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * config/h8300/h8300.mt: Renamed from h8300hms.mt.
- * config/h8500/h8500.mt: Renamed from h8500hms.mt.
- * config/z8k/z8k.mt: Renamed from z8ksim.mt.
- * configure, configure.in: Update to reflect renamings.
-
- * remote-sim.c (sim): New command, passes commands to simulator.
- (simulator_command): New function.
- (gdbsim_ops): Clean up.
- * remote-sim.h (sim_do_command): Declare.
- * sh-tdep.c (memory_size): Remove command.
-
- * Makefile.in (SIM, SIM_OBS): New variables.
- (CLIBS, CDEPS): Add value of SIM.
- (DEPFILES): Add value of SIM_OBS
-
- * config/arm/arm.mt, config/h8300/h8300.mt, config/h8500/h8500.mt,
- config/sh/sh.mt, config/sparc/sp64sim.mt, config/w65/w65.mt,
- config/z8k/z8k.mt: Remove simulator files from TDEPFILES,
- define in SIM_OBS and SIM.
- config/sparc/sp64sim.mt (SIMFILES): Remove.
-
- * remote-z8k.c: Remove, was superseded by remote-sim.c
- * Makefile.in, mpw-make.in: Remove references to remote-z8k.c.
-
-Sun Jun 25 15:30:43 1995 Stan Shebs <shebs@cygnus.com>
-
- * remote.c (remote_read_bytes, remote_write_bytes): Second arg
- should be char *, not unsigned char *.
- * dcache.h (memxferfunc): Ditto.
- * monitor.c (monitor_write_memory, monitor_read_memory_single):
- Ditto.
- (monitor_make_srec): Let compiler figure size of hextab.
-
-Sat Jun 24 19:27:37 1995 Jeffrey A. Law <law@rtl.cygnus.com>
-
- * lynx-nat.c (child_wait): Don't restart new threads and loop
- to the top of child_wait; let the machine independent code in
- wait_for_inferior deal with new thread notifications.
-
-Fri Jun 23 11:51:58 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * remote-nindy (nindy_load): Put in target specific load, it's
- 20 times faster.
-
-Thu Jun 22 20:21:59 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * utils.c (error): Move local `args' outside conditional,
- move local `string1' inside, declare function as void if
- non-ANSI compiler, dereference error_hook when calling.
-
- * mac-xdep.c (stdarg.h): Don't include.
-
-Thu Jun 22 13:12:33 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * remote-nindy.c (nindy_wait): Change timeout in SERIAL_READCHAR.
-
-Wed Jun 21 13:24:41 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * hppam3-nat.c: Change HP800_THREAD_STATE to TRACE_FLAVOR and
- HP800_THREAD_STATE_COUNT to TRACE_FLAVOR_SIZE.
-
-Wed Jun 21 05:57:56 1995 Steve Chamberlain <sac@slash.cygnus.com>
-
- * monitor.c: Turn on caching.
- (monitor_printf): If a ^C was sent, don't expect to see its
- echo.
- (monitor_open): Enable caching.
- (monitor_resume, monitor_load): Flush cache.
- (monitor_xfer_memory): Call cache routine.
- (monitor_dump_regs): New.
- (monitor_fetch_registers): If monitor_dump_regs available
- then use it.
- (monitor_load): Don't ref exec_bfd if it's NULL.
- (monitor_load_srec): Use new monitor_make_srec calling convention.
- (monitor_make_srec): Rewrite to cope with two, three and four byte
- addresses.
- * remote-hms.c (hms_cmds): Initialze end-of-command delim.
- * dcache.h, dcache.h: Rewritten.
- * remote.c: Reenable caching.
- (getpkt): Reduce MAX_TRIES to 3.
- (remote_xfer_memory): Use dcache_xfer_memory.
- * defs.h (error_hook): New.
- * top.c (error_hook): New definition.
- * utils.c (error): Use error_hook if initialized.
- * sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use
- HAVE_SOCKETS in place of #ifndef GO32.
-
-Tue Jun 20 22:17:44 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * config/pa/tm-hppa.h (PSW_*): Define processor status word masks.
- (INSTRUCTION_NULLIFIED): Allow specific targets to override.
- * config/pa/tm-hppao.h (INSTRUCTION_NULLIFIED): Define to work
- around losing mach kernel behavior.
-
-Tue Jun 20 12:03:36 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * monitor.c (monitor_wait): Don't use the watchdog timeout
- if its value is 0.
- * w89k-rom.c (w89k_open): Define to be static.
-
-start-sanitize-gdbtk
-Tue Jun 20 10:19:40 1995 Stu Grossman (grossman@cygnus.com)
-
- * gdbtk.c: Add functions Tcl_Malloc, Tcl_Realloc, and Tcl_Free.
-
- * gdbtk.tcl (add_breakpoint_frame): Add more fields.
- * (create_file_win create_asm_win build_framework): Create null
- bindings for meta keys to keep window from dropping down to
- insertion point when meta is pressed by itself. New bindings:
- Up/Down - Scroll up/down one line at a time
- Next/Prior - Scroll up/down one page at a time
- Home/End - Warp to current pc/end of file
- * (build_framework): Turn on breakpoint menu.
- * (create_command_window): Implement tab completion. Add binding
- for ^C to stop target.
-end-sanitize-gdbtk
-
-Sat Jun 17 10:17:16 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * somsolib.c (som_solib_add): Validate regexp argument.
- Don't assume the first entry on dld's library list is the main
- program. Don't load the same library more than once and don't
- consider the main program a shared library.
- (som_solib_sharedlibrary_command): New function
- (_initialize_som_solib): Add "sharedlibrary" command.
-
-Thu Jun 15 14:54:58 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * array-rom.c: Remove, no longer used.
-
- * remote-hms.c (hms_open): Make static.
-
- * mpw-config.in (MacSerial.h): Copy from version in {CIncludes},
- not {MPW}Interfaces:CIncludes.
- * ser-mac.c (mac_baud_rate_table): Fix value for 38400 baud.
-
-Wed Jun 14 14:27:07 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * ch-exp.y: Remove lots of unsupported productions and names.
- Add support for IF-expressions, ORIF, ANDIF, NUM, and ADDR.
-
-Tue Jun 13 21:40:11 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * parser-defs.h (enum precedence): Added PREC_BUILTIN_FUNCTION.
- * expression.h (enum exp_opcode): Added UNOP_LOWER, UNOP_UPPER,
- UNUP_LENGTH.
- * expprint.c (dump_expression): Handle the new exp_opcodes.
- (print_subexp): Handle PREC_BUILTIN_FUNCTION.
- (print_simple_m2_func): Removed.
- (print_subexp): Remove support for Modula2 builtin functions.
- * m2-lang.c (m2_op_print_tab): Add support for builtin functions.
- * ch-exp.y: Parse LOWER, UPPER, and LENGTH builtins.
- (write_lower_upper_value): Convenience function for LOWER and UPPER.
- (upper_lower_argument, length_argument): Removed non-terminals.
- * ch-lang.c (chill_op_print_tab): Entries for UPPER, LOWER, LENGTH.
- (type_lower_upper): New function. Calculate LOWER/UPPER of type.
- (value_chill_length): New function. Calcalate LENGTH of ARRAY/STRING.
- (evaluate_subexp_chill): Handle UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH.
-
-Mon Jun 12 12:48:13 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- Windows support bits from Steve Chamberlain <sac@slash.cygnus.com>.
- * defs.h: Don't declare strchr and friends if WIN32.
- (DIRNAME_SEPARATOR): Move here from source.c.
- (SLASH_P, SLASH_CHAR, SLASH_STRING, ROOTED_P): New macros,
- symbolic definitions for filename bits.
- * top.c (cd_command): Use these.
- * source.c (mod_path, openp): Ditto.
- * terminal.h: Disable termio/sgtty definitions if WIN32.
- * findvar.c (registers_changed): Call registers_changed_hook
- if it is defined.
-
-Mon Jun 12 12:22:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * Makefile.in (distclean, realclean): Remove config.cache and
- config.log.
-
-Mon Jun 12 00:21:59 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * somsolib.c: Include gdb-stabs.h.
- (som_solib_section_offsets): Use SECT_OFF_XXX rather than 0, 1,
- etc. Initialize offsets for RODATA & BSS too.
-
-Sat Jun 10 17:59:11 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * hppa-tdep.c (frame_chain): Try to compensate for incomplete
- register information in core files when backtracing.
-
-Fri Jun 9 14:51:38 1995 Stu Grossman (grossman@cygnus.com)
-
- * remote-nrom.c: Remove everything but download code. More
- cleanups.
-
-Thu Jun 8 15:06:00 1995 Stu Grossman (grossman@cygnus.com)
-
- * defs.h maint.c monitor.c remote-mips.c remote.c: Add support
- for `watchdog' variable. This allows the user to put an upper
- limit on the amount of time that GDB will wait for the target to
- return from a step or continue operation. This will primarily be
- used for the testsuite, where it is difficult to come up with a
- reasonable timeout for things like function calls, which can take
- as long as three minutes under some circumstances. If the
- watchdog timer expires, GDB will generate an error that looks like
- `Watchdog has expired.', and will detach from the target.
-
- * remote-mips.c (mips_open): Setup initial frame from target.
- Print it out so that user is told where the program is stopped
- when they attach.
-
- * remote-nrom.c: Loads of cleanups. Use serial code to open
- network connections. Use expect() to wait for response to
- download command.
-
- * ser-tcp.c (tcp_open): Retry connection if we get ECONNREFUSED.
-
- * serial.c serial.h (serial_open serial_fdopen serial_close):
- Allow users to open the same device multiple times. They all get
- to share the same serial_t. This is about the only way to have
- multiple active targets use the same device (for download and
- debug).
-
- * sparcl-tdep.c: Keep #include <unistd.h> away from GO32.
-
- * target.c: Add `targetdebug' variable. If this is non-zero,
- then a special target is put at the top of the target stack which
- will cause all calls through the target vector to have their args
- and results printed out.
-
-Wed Jun 7 17:40:37 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * ch-exp.y: Handle <primitive_value> "->" <modename>.
-
-Wed Jun 7 17:46:33 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * mem-break.c (LITTLE_BREAKPOINT): If BREAKPOINT and
- {LITTLE,BIG}_BREAKPOINT are all defined, don't redefine.
- (BIG_BREAKPOINT): Ditto.
-
- * config/rs6000/tm-rs6000.h (BREAKPOINT): Define as either
- BIG_BREAKPOINT or LITTLE_BREAKPOINT depending on the target byte
- order.
-
-Wed Jun 7 12:41:42 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * somsolib.c (som_solib_section_offsets): Handle relative pathnames.
-
- * hppa-tdep.c (frame_saved_pc): Handle backtracing through signal
- handler in dynamically linked executables.
-
-Tue Jun 6 10:44:25 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- From Andrew Cagney <cagney@highland.com.au>
- * rs6000-tdep.c (single_step): Handle both little and big endian
- breakpoints.
- (gdb_print_insn_powerpc): Deal with disassembling both little and
- big endian PowerPC systems.
- (_initialize_rs6000_tdep): Use gdb_print_insn_powerpc to handle
- disassembly, rather that assuming big endian order.
-
- * config/rs6000/tm-rs6000.h (BREAKPOINT): Delete.
- (BIG_BREAKPOINT): Define, big endian breakpoint instruction.
- (LITTLE_BREAKPOINT): Define, little endian breakpoint instruction.
-
-Sat Jun 3 01:54:56 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * README: Add note about Unixware 2.x.
-
- * dbxread.c (process_one_symbol): Check for exact symbol name
- match when fixing up N_GSYM and N_STSYM symbols from Sun acc.
-
- * valprint.c (value_print_array_elements): Use
- fprintf_filtered to put out `<repeats %u times>',
- from schwab@issan.informatik.uni-dortmund.de (Andreas Schwab).
-
- * value.h (struct value): Change `repetitions' field from
- `short' to `int' type.
-
-start-sanitize-arc
-Fri Jun 2 11:17:23 1995 Doug Evans <dje@canuck.cygnus.com>
-
- * arc-tdep.c (arc_bfd_mach_type): New static global.
- (codestream_fill): Handle byte order differences.
- (setup_prologue_scan): Don't read stdarg function's "sub sp,sp,N".
- (arc_get_frame_setup): Read it here.
- (arc_frame_saved_pc): And here.
- (arc_print_insn): New function.
- (arc_set_cpu_type): Set arc_bfd_mach_type. Don't set tm_print_insn.
- (_initialize_arc_tdep): Set tm_print_insn to arc_print_insn.
-end-sanitize-arc
-
-Wed May 31 12:04:01 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * nlm/{configure.in, Makefile.in}: Converted to use autoconf.
- * nlm/configure: New file, generated with autoconf 2.3.
-
- * nlm/configure.in: Use sed instead of awk to get the value of
- cpufile. Awk is not a utility required by the GNU coding
- standards. This change also fixes the rigid whitespace
- requirements that were required for awk.
-
- * sparclite/aload.c: Use a file descriptor instead of a stdio
- stream for i/o with target board.
- Use #error if HAVE_TERMIOS is not defined.
-
- * sparclite/{Makefile.in, configure.in}: Converted to use
- autoconf.
- * sparclite/configure: New file, generated with autoconf 2.3.
-
-Sun May 28 23:10:07 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * defs.h: Include either varargs.h or stdarg.h (for va_list).
- Fix stupid thinko in last change ("..." -> "va_list").
-
- * defs.h (vprintf_filtered declaration): Add PARAMS prototype;
- gcc-2.5 chokes on format attributes for unprototyped functions.
- (vfprintf_filtered declaration): Likewise.
- (vprintf_unfiltered declaration): Likewise.
- (vfprintf_unfiltered). Likewise.
-
-Sat May 27 23:54:17 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * configure.in: Use sed instead of awk to get the values of
- hostfile, targetfile and nativefile. Awk is not a utility
- required by the GNU coding standards. This change also
- fixes the rigid whitespace requirements that were required
- for awk.
- * configure: regenerated.
-
-Sat May 27 16:24:04 1995 Angela Marie Thomas <angela@cirdan.cygnus.com>
-
- * sparclite/{Makefile,configure}.in: Add hooks for building with
- -lsocket & -lnsl for solaris2. Don't build aload/eload for DOS.
-
-Thu May 25 12:46:37 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * gdbserver/remote-utils.c (prepare_resume_reply): Add FIXME
- comment regarding signal numbering.
-
-Wed May 24 15:49:47 1995 Steve Chamberlain <sac@slash.cygnus.com>
-
- * arm-tdep.c (_initialize_arm_tdep): Use print_insn_little_arm
- now.
-
- * arm-tdep.c (convert_from_extended, convert_to_extended):
- New.
- * coffread.c (enter_linenos): Return if linetab 0.
- * config/arm/arm.mt (TDEPFILES): Add simulator support.
- * config/arm/tm-arm.h (FRAME_FIND_SAVED_REGS): Fix prototypes.
-
-Mon May 22 19:37:21 1995 Rob Savoye <rob@darkstar.cygnus.com>
-
- * config/idt.mt: replace monitor and array-rom with the new
- remote-array.
-
-Mon May 22 15:38:25 1995 Stu Grossman (grossman@cygnus.com)
-
- * remote-nindy.c: Install Kung patch for PR 6820. I have no idea
- what this does...
-
- * breakpoint.c: Move defaults of watchpoint related macros into
- target.h.
- * target.h: Macros from breakpoint.c. Conditionalize based on
- TARGET_HAS_HARDWARE_WATCHPOINTS.
- * i386v-nat.c procfs.c: Use TARGET_HAS_HARDWARE_WATCHPOINTS
- instead of TARGET_CAN_USE_HARDWARE_WATCHPOINT to enable watchpoint
- code.
- * config/i386/nm-linux.h, config/mips/nm-irix4.h,
- config/pa/nm-hppab.h, config/sparc/tm-sparclite.h: #define
- TARGET_HAS_HARDWARE_WATCHPOINTS to enable watchpoint code.
-
-Mon May 22 06:47:30 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * breakpoint.c, target.h: Move defaults of watchpoint related
- macros back to breakpoint.c. Required to get GDB compiling
- on Solaris again.
-
-Fri May 19 14:49:37 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * defs.h (ATTR_FORMAT): New macro, expands to gcc's format
- attribute when compiled by gcc.
- * defs.h, language.h, monitor.h: Changed many function
- declarations to use ATTR_FORMAT.
-
- * breakpoint.c (delete_command); source.c (directory_command);
- top.c (define_command): Changed call to query() that had too
- many arguments.
- * printcmd.c (address_info): Changed call to printf_filtered()
- that had too many arguments.
-
-Fri May 19 09:52:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * infrun.c (wait_for_inferior): Move assignments to stop_signal
- and stop_pc, and STOPPED_BY_WATCHPOINT code, back where they
- were--after the switch statement on w.kind. You can't read the
- registers of an inferior which has exited. Use a goto in the
- STOPPED_BY_WATCHPOINT code.
- * infrun.c (wait_for_inferior): Reinstate
- HAVE_STEPPABLE_WATCHPOINT and HAVE_CONTINUABLE_WATCHPOINT code.
-
-Fri May 19 06:15:40 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
-
- * utils.c, complaints.c, language.c, monitor.c, remote-array.c,
- remote-mips.c, remote-os9k.c, remote-st.c: Conditionalize use of
- stdarg rather than varargs on ANSI_PROTOTYPES not __STDC__; it
- must match the definition of PARAMS.
-start-sanitize-gdbtk
- * gdbtk.c: Likewise.
-end-sanitize-gdbtk
-
-Thu May 18 15:58:46 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * utils.c (fprintf_filtered, fprintf_unfiltered, fprintfi_filtered,
- printf_filtered, printf_unfiltered, printfi_filtered, query, warning,
- error, fatal, fatal_dump_core): Use stdarg.h macros when compiling
- with an ANSI compiler.
- * complaints.c (complain): Likewise.
- * language.c (type_error, range_error): Likewise.
- * monitor.c (monitor_printf, monitor_printf_noecho): Likewise.
- * remote-array.c (printf_monitor, debuglogs): Likewise.
- * remote-mips.c (mips_error): Likewise.
- * remote-os9k.c (printf_monitor): Likewise.
- * remote-st.c (printf_stdebug): Likewise.
-start-sanitize-gdbtk
- * gdbtk.c (gdbtk_query): Likewise.
-end-sanitize-gdbtk
-
- * defs.h, complaints.h, language.h, monitor.h: Add prototypes to
- match above changes.
-
- * printcmd.c: Remove uneeded #include <varargs.h>.
- * remote-e7000.c: Likewise.
-
- * f-typeprint.c (f_type_print_base): Fix typo found by above
- changes.
-
-Wed May 17 11:21:32 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
-
- * Makefile.in (xcoffread.o): Depend on partial-stab.h.
-
- * xcoffsolib.c (sharedlibrary_command): New command.
- * xcoffsolib.c (solib_info): Call xcoff_relocate_symtab.
- * xcoffsolib.c: Miscellaneous cleanups.
-
- * partial-stab.h: Ignore symbol descriptor '-' (for local
- variables with negative type numbers) without complaint.
-
- * rs6000-nat.c (vmap_ldinfo): Use bfd_stat rather than our own
- local emulation thereof. Remove unused variable ostart.
-
-Wed May 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * Makefile.in (config.status): changed target so that
- config.status --recheck is executed if configure script changes.
-
- * monitor.c (monitor_printf): Changed format specification in
- error message to work with pre-ansi compilers.
- (monitor_load_srec): reduced length of s-records from 128 to 32
- bytes so download is more reliable with the rom68k monitor.
-
- * rom68k-rom.c: Added trailing space to prompt string.
-
- * config/i386/xm-i386sco.h (HAVE_STRSTR): Removed.
- * config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING):
- Removed.
- * defs.h, config/{xm-lynx.h, xm-nbsd.h},
- config/i386/{xm-i386bsd.h, xm-linux.h},
- config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h,
- config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo
- (PSIGNAL_IN_SIGNAL_H): Removed.
-
-Tue May 16 13:16:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * Makefile.in (Makefile): Added config.status to dependency list.
-
- * configure.in: Added INIT-CMDS argument to AC_OUTPUT which sets
- gdb_host_cpu, gdb_target_cpu and nativefile.
- * configure: regenerated.
-
-Mon May 15 23:50:51 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * mdebugread.c (parse_symbol): Do not relocate stBlock/scText
- symbols, their value is the displacement from the procedure address.
- * top.c (init_main): Add missing newlines to help strings for
- `if' and `while' commands, fix help string for `show commands'.
-
-Mon May 15 18:37:56 1995 Stu Grossman (grossman@cygnus.com)
-
- * breakpoint.c: Move defaults of watchpoint related macros into
- target.h. Use BP_TEMPFLAG and BP_HARDWAREFLAG instead of
- constants.
- * infrun.c (wait_for_inferior): Enhance comment near
- STOPPED_BY_WATCHPOINT.
- * target.h: Macros from breakpoint.c.
-
-Mon May 15 17:11:38 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * config/i386/{i386sol2.mh, i386v4.mh, ncr3000.mh},
- config/m68k/m68kv4.mh, config/mips/{irix4.mh, irix5.mh,
- mipsv4.mh}, config/sparc/sun4so2.mh (INSTALL): Removed, figured
- out by autoconf.
- * config/apollo68v.mh (RANLIB): Removed, figured out by autoconf.
-
- * Makefile.in, configure.in: Converted to use autoconf
- * aclocal.m4: New file, local autoconf macro definitions.
- * configure: New file, generated with autoconf 2.3.
-
-Mon May 15 14:46:41 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote.c (remote_kill): Add prototype.
- * cpu32bug-rom.c (cpu32bug_open): Properly define as static.
- * config/h8300/h8300hms.mt (TDEPFILES): Add monitor.o.
-
-Mon May 15 12:12:34 1995 Stu Grossman (grossman@cygnus.com)
-
- * sparclite/salib.c (win_ovf win_unf): Make window size constant
- into a variable (__WINSIZE) so that it can be controlled via the
- .h file.
- * sparclite/sparclite.h: Add SL933 #ifdef to set __WINSIZE to 6
- for the 933 board.
-
- * infrun.c: Add #ifdef HP_OS_BUG to all references to
- trap_expected_after_continue.
- * (wait_for_inferior): Fix for remote watchpoints. Don't try to
- insert breakpoints while target is running (this only works on
- *some* native targets). This may also speed up native watchpoints
- considerably.
-
-Sat May 13 13:55:04 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * dwarfread.c (struct dwfinfo), dbxread.c (struct symloc),
- mdebugread.c (struct symloc), hpread.c (struct symloc),
- xcoffread.c (struct symloc): Fix inaccurate comment introduced
- 20 Apr 1995.
-
-Sat May 13 13:34:18 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
-
- * rs6000-tdep.c (find_toc_address): Revise comment.
- * symfile.c, symfile.h (init_psymbol_list): New function;
- consolidate duplicated copies from os9kread.c, dbxread.c
- and dwarfread.c.
- * defs.h: Declare info_verbose.
- * xcoffread.c: Extensive changes to support psymtabs.
-
-Fri May 12 13:48:41 1995 Stu Grossman (grossman@andros.cygnus.com)
-
- * cpu32bug-rom.c remote-est.c rom68k-rom.c: Update line_term element.
-
-Fri May 12 06:39:30 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * partial-stab.h: Expand comments.
-
-Thu May 11 19:01:37 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * Support debugging using native MACH primitives on hppa*-*-osf*.
- * configure.in: hppa*-*-osf* != hppa*-*-bsd* anymore.
- * config/pa/hppaosf.mh: New file.
- * config/pa/nm-hppao.h: Likewise.
- * hppam3-nat.c: Likewise.
- * config/pa/tm-hppao.h (PSW_SS): Define for single-stepping.
- (MACHINE_CPROC_*_OFFSET): Define.
- (TRACE_*): Define.
- (START_INFERIOR_TRAPS_EXPECTED): Delete definition.
-
-Wed May 10 18:59:26 1995 Stu Grossman (grossman@andros.cygnus.com)
-
- * hppa-tdep.c (read_unwind_info): Cosmetic cleanup.
- * (unwind_command): Clean it up and make it print things out
- nicer.
- * monitor.c: Add ^C handling capability (mostly ripped off from
- remote.c).
- * (monitor_printf): Make it check the command echo.
- * (monitor_printf_noecho): Similar to above, but doesn't check
- for echo.
- * (monitor_stop): No longer waits for prompt. That is the job of
- the caller. This makes things work much better for monitor_wait,
- which waits for the prompt itself.
- * (monitor_open): Deal with new monitor_stop semantics. Also,
- flush input after sending init strings to get rid of junk that may
- be output. Also, don't always send \r to remote. Use
- monitor_ops->line_term cuz proper character isn't always \r.
- * (monitor_fetch_register): Switch to completely different
- algorithm to deal with lame-ass monitors which put spaces in the
- middle of numbers, and prompt with a space!!!!!
- * (monitor_read_memory_single): New routine to be used with
- monitors that can only return one byte/short/long at a time. This
- is selected via MO_GETMEM_READ_SINGLE.
- * (monitor_load_srec): Use monitor_printf_noecho for sending S
- records. Most targets don't echo them.
- * (monitor.h): Get rid of cmd_delim. Add line_delim.
- * op50n-rom.c (op50n_cmds): Fill it up. Make it work.
- * w89k-rom.c: Change all eols from \r to \n. Change load_resp to
- ^Q to prevent error message.
- * config/pa/tm-hppa.h (CALL_DUMMY (for hppro)): Add special
- instruction sequence at end to make restore_pc_queue happy.
-
-Wed May 10 15:59:00 1995 Torbjorn Granlund <tege@adder.cygnus.com>
-
- * remote-est.c (est_open): Make static to match prototype.
-
-Tue May 9 16:58:50 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * configure.in: Add little endian PowerPC support.
- * config/powerpc/ppcle-eabi.mt: New file for little endian PowerPC
- support.
- * config/powerpc/tm-ppcle-eabi.h: ditto.
-
-Mon May 8 12:11:38 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * nlm/configure.in (gdb_host, gdb_host_cpu, gdb_target): Removed.
- These variables not used.
-
- * config/m68k/monitor.mt (TDEPFILES): Added cpu32bug-rom.o.
-
-Wed May 3 17:54:47 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * monitor.c (monitor_command): Don't use PROMPT until monitor
- target is known to be open.
- (monitor_make_srec): Don't define size of hextab.
-
-Tue May 2 18:32:24 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * configure.in (--enable-netrom): New configuration option.
- * Makefile.in (REMOTE_OBS): Rename from REMOTE_O, append
- value of NETROM_OBS.
- (NETROM_OBS): New variable.
- * remote-nrom.c: New file, NetROM target support.
- * config/a29k/a29k-udi.mt, config/i960/vxworks960.mt: Use
- REMOTE_OBS instead of REMOTE_O.
-start-sanitize-arc
- * config/arc/arc.mt: Ditto.
-end-sanitize-arc
-
-Fri Apr 28 23:30:00 1995 Stu Grossman (grossman@cygnus.com)
-
- * array-rom.c (_initialize_array array_open): Move baud_rate
- initialization from _initxxx to array_open to fix bug with
- overriding -b command line option.
-
-Thu Apr 27 20:29:34 1995 Doug Evans <dje@canuck.cygnus.com>
-
- * Makefile.in (RUNTEST): Fix reference of `srcdir'.
-
-Wed Apr 26 19:01:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
-
- * remote-hms.c: Rewrite to use new monitor conventions.
-
-Tue Apr 25 11:27:14 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * dbxread.c: Add comment explaining lowest_text_address.
- Add comment regarding stringtab_global and psymtabs.
-
-Sat Apr 22 01:26:29 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * config/pa/tm-hppa.h (EXTRACT_STRUCT_VALUE_ADDRESS): Fix.
-
- * config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Rewrite to correctly
- handle "short", "int" and small structures returned in registers.
-
-Fri Apr 21 12:57:53 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * minsyms.c: add new function lookup_minimal_symbol_text, to look
- for text symbol only.
- * breakpoint.c (create_longjmp_breakpoint): call
- lookup_minimal_symbol_text instead of lookup_minimal_symbol.
- * symtab.h: add lookup_minimal_symbol_text prototype.
-
-Fri Apr 21 12:03:44 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * sh-tdep.c (sh-opc.h): Don't include.
- (gdbcore.h): Include.
- (frame_find_saved_regs): Remove unused local.
-
-Thu Apr 20 10:12:21 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * dwarfread.c (struct dwfinfo), dbxread.c (struct symloc),
- mdebugread.c (struct symloc), hpread.c (struct symloc): Clean
- up comments.
-
-Wed Apr 19 16:58:11 1995 Stu Grossman (grossman@andros.cygnus.com)
-
- * hppa-tdep.c (deposit_17): New routine to deposit 17 bit
- constants into PA instructions.
- * Put #ifdefs around all signal handling code. Not generally
- needed for embedded boards.
- * (hppa_fix_call_dummy): Parameterize offsets into call dummy to
- allow different dummys to be used by this code. Use
- INSTRUCTION_SIZE instead of REGISTER_SIZE for things.
- Conditionalize setup of _sr4export fixup. Improve comments.
- * config/pa/tm-hppa.h: Define INSTRUCTION_SIZE. Use a different
- call dummy if PA_LEVEL_0 is defined. Better comments for call
- dummys. Define offsets for LDIL/LDO instructions which load
- function addresses.
- * config/pa/tm-pro.h: Get rid of signal handling stuff. Define
- PA_LEVEL_0 to disable mucking with space regs and such.
-
-Mon Apr 17 15:37:08 1995 Stu Grossman (grossman@andros.cygnus.com)
-
- * cpu32bug-rom.c monitor.h op50-rom.c remote-est.c rom68k-rom.c
- w89k-rom.c: Remove loadtypes, loadprotos and baudrates.
- * op50-rom.c: Fix copyrights and add load routine to op50n_cmds.
- * rom68k-rom.c (_initialize_rom68k): Don't set baud rate.
- * w89k-rom.c: Fix copyrights.
-
-Sun Apr 16 14:00:55 1995 Stu Grossman (grossman@andros.cygnus.com)
-
- * monitor.c: Move all xmodem stuff into xmodem.[ch]. Remove
- unnecessary remoteloadprotocol and remoteloadtype support.
- * (expect expect_prompt): Change names to monitor_expect and
- monitor_expect_prompt. Make them global.
- * (printf_monitor): Change name to monitor_printf. Make global.
- * (monitor_read_memory): Flush command echo to avoid parsing
- ambiguity with CPU32Bug monitor.
- * (monitor_load): Remove remoteloadprotocol and remoteloadtype
- support. Call target_ops->load_routine, default to
- monitor_load_srec.
- * (monitor_load_srec): Remove everything but S-record support.
- * monitor.h (monitor_ops): Add load_routine to provide monitor
- specific download capability.
- * remote-est.c: Clean up copyrights and comments.
- * w89k-rom.c: Use new xmodem support.
- * xmodem.c xmodem.h: New files to support xmodem downloads.
- * rom68k-rom.c remote-est.c: Fix copyrights, add load_routine
- entry to monitor_ops.
- * cpu32bug-rom.c: New file to support Moto BCC debuggers.
- * config/m68k/est.mt (TDEPFILES): Add cpu32bug.o.
- * config/pa/hppapro.mt (TDEPFILES): Add xmodem.o.
-
-Sat Apr 15 18:00:15 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * rem-multi.shar: Removed; superceded by gdbserver.
-
-Fri Apr 14 12:10:24 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
-
- * xcoffread.c (xcoff_sym_fns): Revise comment about merging this
- with coffread.c.
-
- * breakpoint.c (fixup_breakpoints): Removed.
- * rs6000-nat.c (vmap_symtab): Don't call fixup_breakpoints.
- (vmap_ldinfo, xcoff_relocate_core): Call breakpoint_re_set.
-
- * coffread.c (coff_symfile_offsets): Allocate SECT_OFF_MAX
- sections, not just SECT_OFF_MAX-1.
-
- * rs6000-nat.c (vmap_symtab), xcoffread.c: Re-do section offsets
- to be indexed by SECT_OFF_* instead of xcoff section numbers.
- * objfiles.c, remote.c: Remove comments regarding SECT_OFF_*.
- * symtab.h: Revise comment about block_line_section.
- * rs6000-nat.c (vmap_symtab): Don't relocate objfile->sections.
-
-Sat Apr 15 14:15:14 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * mpw-make.in (init.c): Don't try to do symbolic {o} in sed
- command, not allowed by some version of MPW Make.
- * ser-mac.c (mac-setbaudrate): Make it actually set baud rates.
-
-Sat Apr 15 14:05:09 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * alpha-tdep.c (alpha_push_arguments): Fix typo (TYPE_VALUE ->
- VALUE_TYPE). Do the cast for TYPE_CODE_BOOL, TYPE_CODE_CHAR,
- TYPE_CODE_ENUM, and TYPE_CODE_RANGE as well as TYPE_CODE_INT.
-
-Sat Apr 15 14:04:32 1995 Per Bothner <bothner@cygnus.com>
-
- * alpha-tdep.c (alpha_push_arguments): Only cast to long for
- TYPE_CODE_INT.
-
-start-sanitize-gdbtk
-Sat Apr 15 13:52:24 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * gdbtk.c (gdb_disassemble): Read from inferior if connected
- to a VxWorks target.
-
-Fri Apr 14 10:18:20 1995 Stu Grossman (grossman@cygnus.com)
-
- * README.GDBTK: New file. Contains the obvious.
-end-sanitize-gdbtk
-
-Thu Apr 13 16:17:04 1995 Rob Savoye <rob@darkstar.cygnus.com>
-
- * remote-array.c: New file for Array Tech LSI33k based controller
- board.
-
-Thu Apr 13 12:23:31 1995 Kung Hsu <kung@rtl.cygnus.com>
-
- * a29k-tdep.c (get_longjmp_target): Replace SWAP_TARGET_AND_HOST with
- extract_address.
- * remote-vxsparc.c: New file, preliminary check in, this configuration
- not supported yet.
- * remote-vxmips.c: ditto.
-
-Thu Apr 13 12:10:14 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * rs6000-tdep.c (xcoff_add_toc_to_loadinfo): Don't use a prototype
- to declare the function.
-
-Wed Apr 12 16:40:20 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * monitor.h (init_monitor_ops): Declare.
- * rom68k-rom.c: Clarify some comments.
- (rom68k_open): Define as static, to match decl.
-
-Wed Apr 12 16:36:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * gdb.gdb: New file.
- * .gdbinit: Move list-objfiles to gdb.gdb.
-
- * values.c (set_internalvar): Set modifiable flag of newval.
-
-Wed Apr 12 14:34:31 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
-
- * xcoffread.c: Call complain() rather than error() or printing a
- warning.
-
-start-sanitize-arc
-Wed Apr 12 08:15:27 1995 Doug Evans <dje@canuck.cygnus.com>
-
- * arc-tdep.c: #include "gdbcmd.h".
- (codestream_seek): Pass CORE_ADDR.
- (arc_cpu_type, tmp_arc_cpu_type, arc_cpu_type_table): New globals.
- (debug_pipeline_p): Likewise.
- (X_...): Instruction field access macros.
- (BUILD_INSN): Define.
- (codestream_tell): Allow for stream elements > 1 byte.
- (codestream_fill): Likewise.
- (setup_prologue_scan): New function.
- (arc_get_frame_setup): Call it. Update to current spec
- regarding prologues. Use BUILD_INSN.
- (skip_prologue): New argument `frameless_p'. Use BUILD_INSN.
- (arc_frame_saved_pc): New function.
- (frame_find_saved_regs): Use BUILD_INSN.
- (get_insn_type, single_step): New functions.
- (one_stepped): New global.
- (arc_set_cpu_type_command, arc_show_cpu_type_command): New functions.
- (arc_set_cpu_type): New function.
- (_initialize_arc_tdep): Define new `set' commands `cpu',
- `displaypipeline', and `debugpipeline'.
- * remote-arc.c (break_insn): Add bi-endian support.
- (arc_insert_breakpoint): Likewise.
- (arc_remove_breakpoint): Likewise.
- (switch_command): Delete.
- * arc/tm-arc.h (TARGET_BYTE_ORDER): Delete.
- (TARGET_BYTE_ORDER_SELECTABLE): Define.
- (DEFAULT_ARC_CPU_TYPE): Define.
- (SKIP_PROLOGUE_FRAMELESS_P): Define.
- (BREAKPOINT): Delete.
- (BIG_BREAKPOINT, LITTLE_BREAKPOINT): Define.
- (DECR_PC_AFTER_BREAK): Change to 8.
- (NO_SINGLE_STEP): Define.
- (ARC_PC_TO_REAL_ADDRESS): Define.
- (SAVED_PC_AFTER_CALL): Use it.
- (NUM_REGS, REGISTER_BYTES): Fix.
- (FRAME_SAVED_PC): Call arc_frame_saved_pc.
- (FRAME_LOCALS_ADDRESS): Fix.
-end-sanitize-arc
-
-Tue Apr 11 16:42:37 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * top.c, utils.c, defs.h: Remove error_hook. It is currently
- unused and would need to hook into error_begin()/return_to_top_level(),
- instead of error(), if it were to be used.
-
-Tue Apr 11 13:46:25 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
-
- * utils.c, defs.h (warning_begin): Renamed from warning_setup, for
- consistency with error_begin. Also print warning_pre_print.
- Document it better.
- * utils.c (warning): Use it.
- * utils.c (error_begin): Doc fix.
- * rs6000-nat.c (vmap_ldinfo): If we don't find ldinfo for the
- symfile_objfile, nuke it.
-
-Tue Apr 11 09:35:20 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * printcmd.c (print_address_numeric): Pass use_local to
- print_longest, rather than always passing 1.
-
- * nlm/Makefile.in: Remove comments discussing munch.
-
-start-sanitize-gdbtk
-Tue Apr 11 11:07:12 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, but
- F_SETOWN is, use that.
-end-sanitize-gdbtk
-
-Mon Apr 10 18:31:57 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- Merge in support for Mac MPW as a host.
- (Old change descriptions retained for informational value.)
-
- * mpw-config.in (i386-unknown-go32): Change from aout.
- (sh-hitachi-hms): New target.
- * mpw-make.in (BISON): Use byacc instead of bison.
- (VERSION): Bump to 4.14.1.
- (*-pinsn.*): Remove mentions everywhere.
- (all): Don't build MacGDB.
- (gdb, SiowGDB): Depend on Version.r.
- (Version.r): Generate from version info.
- * main.c (main): Pass program name to START_PROGRESS, END_PROGRESS.
- (main) [MPW]: Remove debugging hook.
- * mac-xdep.c (debug_openp): New flag.
- (mac_init): Set flag if env variable defined.
- * ser-mac.c (mac_open): Clarify error message.
- (mac_readchar): Call PROGRESS while looping.
- (mac_write): Call sleep instead of sec_sleep.
- (sec_sleep): Remove.
- * source.c (openp) [MPW]: Only print debugging info if debugging.
- * utils.c (query) [MPW]: Clarify that behavior is a bug.
-
- * mpw-make.in (init.c): Use open-brace instead of mpw-open-brace.
-
- * main.c, source.c: Remove hacks that replace long strings
- with shorter ones, now solved portably.
-
- * config/m68k/xm-mpw.h (spin.h): Include.
- (ALMOST_STDC): Only define if MPW_C.
- * config/m68k/tm-mac.h: New file, Mac target definitions.
-
- * mpw-config.in (m68k-apple-macos, ppc-apple-macos,
- i386-unknown-aout): New targets.
- (mk.tmp): Add *DEPFILES definitions.
- * mpw-make.in: Remove gC rules, clean up definitions for other
- include files, bump version, fix bogus \ that should be \Option-d.
- (init.c): Build correctly.
-
- * mpw-make.in (HFILES_NO_SRCDIR): Add somsolib.h
- (ALLDEPFILES): Add somsolib.c.
- (somsolib.o): Add some dependencies.
-
- * mpw-config.in: Use nm-empty.h if host is not target.
- (xdepfiles): Add mac-xdep.c.o.
- (xm_file): Remove.
- * mpw-make.in: Add Fortran files.
- (XDEPFILES): Remove.
-
- * mpw-config.in (MacSerial.h): Duplicate from standard Serial.h.
- * ser-mac.c (MacSerial.h): Include instead of Serial.h.
-
- * mpw-make.in: Use {s} instead of {srcdir} everywhere.
- (bindir, libdir): Remove extra colon.
- (source.c): Compile with C instead of gC.
- (c-exp.tab.c, ch-exp.tab.c, m2-exp.tab.c): Add {o}.
- (install-only): Don't install MacGDB.
- * source.c (openp) [MPW]: Add a debugging display.
- (open_source_file) [MPW]: Use MPW basename finders.
- [MPW_C]: Briefer versions of help for line and list commands.
-
- * mpw-make.in: Change references from paread.c to somread.c
-
- * mpw-make.in (VERSION): Update to 4.12.3.
- (SiowGDB): New target, GDB using SIOW library.
- (init-new.c): New target, attempt to generate init.c from sources.
- (main.c.o, top.c.o): Put each in its own segment.
- * main.c (main) [MPW]: Always call mac_init.
- * utils.c (query) [MPW]: Always return "yes" if in MacGDB, output
- an extra newline otherwise.
- * mac-xdep.c: More comments in various places, remove junk.
- (mac_init): Add tests for MPW and SIOW.
- (use_wne, has_color_qd): Renamed.
- (use_color_qd): New variable.
- (grow_window): Only do console resizing to console window,
- call resize_console_window.
- (zoom_window): Call resize_console_window.
- (resize_console_window, scroll_text): New functions.
- (adjust_console_sizes): Always align viewrect to even multiples of
- text lines.
- (adjust_console_text): Always scroll by whole lines.
- (hacked_vfprintf, hacked_puts, hacked_fputc, hacked_putc): Force a
- recalculation of scroll positions if a newline was output.
- (hacked_fflush): Similarly, for flushing.
- (hacked_fgetc): New function, aborts if called in MacGDB.
- * ser-mac.c (mac_readchar): Rename starttime to start_time,
- remove debugging printf.
- (mac_write): Sleep on first 4 writes.
- (sec_sleep): New function, works like standard sleep.
- * macgdb.r: Adjust positioning and contents of About box.
- Set minimum size to 2000K, preferred size to 5000K.
- * config/m68k/xm-mpw.h (fgetc): Define as a macro.
-
- * mpw-make.in (.c.o, .gc.o): Prefix segment names with gdb_.
- (top.c.o, annotate.c.o): Add build rules.
- * macgdb.r (SysTypes.r): Include.
- ('vers'): New resource, version info.
- (mFile, mEdit, mDebug): Enable all menu items.
- (mDebug): Add key equivalents for continue, step, next.
- (wConsole): Add zoom and close boxes to window.
- * mac-xdep.c (new_console_window): New function, code taken from
- mac_init.
- (mac_command_loop): Use GetCaretTime for wait interval, call
- do_idle on null events.
- (do_idle): New function.
- (zoom_window): Implement zooming.
- (v_scroll_proc): New function, handles vertical scrolling.
- (activate_window): Do activation of console window.
- (do_menu_command): Implement items of file, edit, and debug menus.
- (do_keyboard_command): Fix command extraction.
- (adjust_console_sizes, adjust_console_text): New functions.
- (hacked_fprintf, hacked_vfprintf, hacked_fputs, hacked_fputc,
- hacked_putc): Don't call draw_console.
- * ser-mac.c (mac_open): Add an error message for invalid ports.
- (first_mac_write): New global.
- (mac_write): Use first_mac_write to sleep on first several writes.
-
- * mpw-make.in (INCLUDE_CFLAGS): Add readline source dir.
- (READLINE_CFLAGS, READLINE_SRC, READLINE_DIR): Uncomment.
- (TSOBS): Don't compile inflow.c.
- (all, install): Add MacGDB.
- * main.c (main): Do Mac-specific init and command loop if a
- standalone app, skip full option help message if compiling
- with MPW C.
- (gdb_readline): If MPW, add a newline after the (gdb) prompt.
- * utils.c (_initialize_utils): If MPW, don't try to use termcap to
- compute the window size.
- * config/m68k/xm-mpw.h (printf, fprintf, fputs, fputc, putc,
- fflush): Define as macros that expand into hacked_... versions.
- (StandAlone, mac_app): Declare.
- * macgdb.r (SIZE): Set the default partition to 4000K.
- * mac-xdep.c (readline.h, history.h): Include.
- (terminal.h): Don't include.
- (mac_app): Define.
- (gdb_has_a_terminal): Define Mac-specific version.
- (do_keyboard_command): Simplify search for command string.
- (readline): Define as gdb_readline.
- Add other history/readline stubs to make main gdb link.
- (hacked_fprintf, hacked_printf, hacked_vfprintf, hacked_fputs,
- hacked_fputc, hacked_fflush): New functions, intercept output to
- stdout and stderr, send to console window.
-
- * mpw-make.in (MacGDB): New target, standalone Mac-hosted gdb.
- (XDEPFILES): Define.
- (main.c.o): Compile with gC instead of C.
- * mac-defs.h: New file, menu etc definitions shared between
- C and Rez files.
- * macgdb.r: New file, Rez (resource compiler) resource
- definitions.
- * mac-xdep.c: New file, Mac host interface code.
- * config/m68k/xm-mpw.h (PATHNAME_SEPARATOR): Rename to
- DIRNAME_SEPARATOR.
- (PATHNAME_SEPARATOR_STRING): Remove.
- (SIGQUIT, SIGHUP): Define.
- (fileno, R_OK): Define.
-
- * mpw-config.in: New file, MPW configuration fragment.
- * mpw-make.in: New file, MPW makefile fragment.
- * config/m68k/xm-mpw.h: New file, MPW host definitions.
- * ser-mac.c: New file, Mac serial interface.
-
-Mon Apr 10 16:47:57 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * valprint.c (print_longest): Fix a syntax error in #ifdef
- PRINTF_HAS_LONG_LONG.
-
- * config/mips/xm-irix5.h: turn on CC_HAS_LONG_LONG and
- PRINTF_HAS_LONG_LONG.
- * config/mips/tm-irix5.h: turn on FORCE_LONG_LONG.
-
-Sat Apr 8 02:47:45 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * mdebugread.c (parse_symbol): Use new variable
- nodebug_var_symbol_type as type of variables which don't have any
- ecoff debug info associated with them.
- (parse_symbol, parse_procedure): Use heuristics to determine if
- functions were compiled without debugging info and change their
- type to nodebug_function_symbol_type.
- (_initialize_mdebugread): Initialize nodebug_*_symbol_type.
-
- * source.c (line_info): Clear sal.pc for `info line' without
- arguments.
-
-Fri Apr 7 17:43:01 1995 Stu Grossman (grossman@andros.cygnus.com)
-
- * monitor.c: make_xmodem_packet and print_xmodem_packet go away.
- send_xmodem_packet shows up to do the obvious. Lots of fixes to
- xmodem downloads including resetting of block number at start of
- new transfers, fix for buffer overrun problem, addition of CRC
- generation code.
- * (monitor_open): loadtype_str and loadproto_str now default to
- first entry in monitor_ops->loadtypes.
- * (monitor_wait): Lengthen register dump buf, because of verbose
- Winbond monitor.
- * (monitor_fetch_register): Report unimplemented registers as 0.
- * (monitor_read_memory): Only do 16 byte aligned transfers
- because of formatting weirdness with the Winbond monitor. Also,
- ignore non-hex, non-whitespace formatting between bytes (same
- monitor).
- * (monitor_load): Clean up logic.
- * (monitor_load_srec): Re-do xmodem support. Move lots of it
- into send_xmodem_packet.
- * (getacknak): Get rid of polls and timeouts. Handle CRC
- requests from receiver.
- * (monitor_make_srec): Efficiency improvements. Don't call
- sprintf to output two digit hex numbers.
- * (crcinit, docrc): New, CRC-16 support routines.
- * (send_xmodem_packet): New routine to generate either CRC-16 or
- checksummed xmodem packets.
-
- * remote-est.c (est_loadtypes), rom68k-rom.c (rom68k_loadtypes):
- Reduce tables down to only the load types supported by each
- monitor.
-
- * w89k-rom.c (w89k_supply_register): Parses output of Winbond
- register dumps.
- * (w89k_loadtypes, w89k_loadprotos): Reduce to just srec/xmodem.
- * (w89k_cmds): Add clear all breakpoints, memory fill, and dump
- registers commands.
-
- * config/pa/tm-hppa.h: Define lots register offsets needed by
- w89k-rom.c.
-
-
-Thu Apr 6 17:00:46 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * Makefile.in (X11_INCLUDES): Define as empty.
- (X11_CFLAGS): Define as including $(X11_INCLUDES).
- (X11_LIB_SWITCHES): Define as empty.
- (X11_LIBS): Define as -lX11.
-
-start-sanitize-gdbtk
- * configure.in (enable_gdbtk): If gdbtk, support the --x-includes
- and --x-libraries switches, setting the X11_INCLUDES and
- X11_LIB_SWITCHES respectively. Instead of using a hardcoded -lX11
- in ENABLE_CLIBS, use the X11_LIB_SWITCHES and X11_LIBS variables.
-
- * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, don't use
- it. This means that the stop button doesn't work, but is better
- than nothing.
-end-sanitize-gdbtk
-
-Wed Apr 5 19:57:38 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * mips-tdep.c (mips_print_register): Remove unused variable
- our_type and call to init_type. Fixes memory leak. Reindent function.
-
- * mips-tdep.c (mips_print_register), findvar.c
- (write_register_bytes): Make buffer char[] instead of unsigned
- char[].
-
-Mon Apr 3 19:28:14 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * top.c, utils.c, main.c, defs.h: Replace error_pre_print with two
- variables: error_pre_print (for RETURN_ERROR) and quit_pre_print
- (for RETURN_QUIT). Fixes a bug whereby typing ^C (e.g. in "maint
- print sym") could output extraneous stuff.
- * objfiles.c: Don't declare error_pre_print; defs.h does it.
-
-Mon Apr 3 13:48:28 1995 Stu Grossman (grossman@andros.cygnus.com)
-
- * monitor.h: Add MO_GETMEM_NEEDS_RANGE flag.
- * monitor.c (monitor_read_memory): Use previously mentioned flag
- to send proper format memory examine commands to the w89k monitor.
- Also, try to handle bizarre format of memory dump...
-
- * op50-rom.c w89k-rom.c: Update to new monitor.[ch] conventions.
-
-Sat Apr 1 03:22:20 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]:
- Handle relocated symbol address.
- * partial-stab.h, case N_SO, SOFUN_ADDRESS_MAYBE_MISSING:
- Do not relocate a zero address.
-
-Thu Mar 30 19:46:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * config/a29k/tm-a29k.h: Nuke obsolete define CONTROL_END_ADDR; it
- is nowhere used.
-
- * stabsread.c (read_range_type): Remove FIXME comment about
- type-id (I presume this meant a number followed by = followed by a
- type) versus type number; Per fixed it.
-
-Wed Mar 29 09:56:04 1995 Jason Molenda (crash@phydeaux.cygnus.com)
-
- * configure.in: sparc-*-sunos5* is same as sparc-*-solaris2*.
-
-Wed Mar 29 18:30:03 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote-e7000.c (why_stop): Add new kinds of strings to expect
- from the emulator.
- (e7000_wait): Add interpretations for more stop reasons,
- including warnings for write protect and cycle address errors.
-
-Wed Mar 29 17:09:29 1995 Stu Grossman (grossman@cygnus.com)
-
-start-sanitize-gdbtk
- * Makefile.in (gdbtk.o): Use X11_CFLAGS to provide alternate
- locations (per-host) for X11 include files.
- * config/pa/hppahpux.mh (XM_CLIBS): Add -L/usr/lib/X11R5 to force
- the use of R5 libs. (X11_CFLAGS): Add this to indicate the locs
- of the R5 include files.
-end-sanitize-gdbtk
- * monitor.c monitor.h remote-est.c rom68k-rom.c: Add start of
- support for interrupting target.
- * monitor.c (monitor_open): Send stop command before doing
- anything else.
- * (monitor_load_srec): Fix record size calculation to prevent end
- of segment from getting trashed.
- * rom68k-rom.c: Update to latest version of struct monitor_ops.
- * config/sparc/tm-sparc.h (FIX_CALL_DUMMY): Fix byte-order
- problems. Makes DOS hosted function calling work.
- * sparclite/crt0.s: Define _start to make COFF happy.
-
-Wed Mar 29 09:11:51 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * defs.h (atof): Don't provide an external declaration if atof is
- a macro.
-
-Wed Mar 29 00:01:07 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * rs6000-tdep.c (skip_prologue): Skip saving of LR and CR in
- the stack frame, fix typos in `st rx,NUM(r1)' and `stu r1,NUM(r1)'
- tests.
-
-Tue Mar 28 17:04:04 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * gdbtypes.c (create_range_type): If indextype has TYPE_FLAG_STUB
- set, set TYPE_FLAG_TARGET_STUB.
- (check_stub_type): Recalculate TYPE_LENGTH for range type.
- * stabsread.c (read_range_type): If index type number is followed
- by '=', back up, call read_type. and assume we have a true range.
- * gdbtypes.h (TYPE_FLAG_TARGET_STUB): Update comment.
-
-Mon Mar 27 22:51:54 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * alpha-nat.c, irix4-nat.c, irix5-nat.c, mipsv4-nat.c,
- sparc-tdep.c (supply_gregset, supply_fpregset): Fill inaccessible
- registers with zero to handle recent read_register_bytes change.
- * irix4-nat.c, irix5-nat.c, mipsv4-nat.c (supply_gregset,
- fill_gregset): Fix handling of CAUSE_REGNUM.
- * mips-nat.c (store_inferior_registers): Handle unwritable
- registers when storing a single register.
- * config/mips/tm-irix3.h (CAUSE_REGNUM, BADVADDR_REGNUM):
- Fix definitions.
-
- * mdebugread.c (parse_symbol, psymtab_to_symtab_1): Clear
- allocated mips_extra_func_info, if the debug info is corrupt,
- the PDR to fill it in might be missing.
-
-Mon Mar 27 14:43:00 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * vx-share/regPacket.h: a new file interfacing with vxworks.
-
-Sun Mar 26 13:22:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * breakpoint.c (bpstat_do_actions): Once we've executed the
- commands, set bs->commands to NULL.
-
-Sat Mar 25 01:16:10 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * buildsym.c (patch_subfile_name): Update last_source_file
- with the real source file name.
- * dbxread.c (end_psymtab): Handle static functions in the
- SOFUN_ADDRESS_MAYBE_MISSING case by passing pst->filename
- to lookup_minimal_symbol.
- (process_one_symbol): Ignore extra outermost context from
- SunPRO cc and acc.
- * stabsread.c (define_symbol): Do not complain for SunPRO
- static variable encoding if STATIC_TRANSFORM_NAME is defined.
- * sparc-tdep.c, config/sparc/tm-sun4sol2.h
- (sunpro_static_transform_name): Renamed from
- solaris_static_transform_name.
- * config/sparc/tm-sun4os4.h (STATIC_TRANSFORM_NAME):
- Define to sunpro_static_transform_name for acc 3.0 compiled
- executables.
- * procfs.c, config/alpha/nm-osf2.h (PROCFS_DONT_TRACE_FAULTS):
- Renamed from PROCFS_DONT_TRACE_IFAULT, don't trace any faults
- if defined.
- * procfs.c (info_proc_siginfo): Cast sip->si_addr to
- `unsigned long' and use `lx' format for printing it.
-
-Fri Mar 24 15:45:42 1995 Stu Grossman (grossman@cygnus.com)
-
- * configure.in: Move test for m68*-est-* before m68*-*-coff*.
- * findvar.c: Move default def of CANNOT_STORE_REGISTER closer to
- the beginning of the code.
- * (write_register_gen): New routine. Analogous to
- read_register_gen.
- * (write_register_bytes): Another rewrite! Make it smarter about
- not updating regs with the same value.
- * monitor.c (printf_monitor readchar): Use stderr instead of
- stdout to output debug info. Also cleanup readchar a little.
- * (expect): Make sure that excessive responses are null
- terminated.
- * (monitor_open): Check for magic number in monitor_ops struct.
- Allow multiple commands as init strings. Also, clear all
- breakpoints.
- * (monitor_resume monitor_wait): Send a command to dump all the
- regs for those targets which don't do so when waking up after a
- continue command.
- * (monitor_wait): Handle excessive response output better.
- * (monitor_write_memory): Use block fill, word, and long word
- commands (if they exist) to write memory more efficiently.
- * General cleanups to use flag bits instead of individual flag
- words in monitor_ops struct.
- * (monitor_command): Return output from command.
- * (monitor_load_srec): Allocate buffer only once. Use alloca.
- Wait for load response string instead of using a timeout to start
- sending S-records. Fix bug where value of srec_frame shrinks. If
- hashmark is set, print `-' for retransmissions. General cleanups.
- * (monitor_make_srec): Get rid of S-record default type kludge.
- * monitor.h: Use seperate struct for memory and register
- read/write commands. Memory commands can come in byte, word,
- long, and longlong forms.
- * (monitor_ops): Change lots of fields. Generalize some stuff.
- Put all flags into flags word. Allow init to be a list of commands.
- Add command for clearing all breakpoints, block fill, dumping all
- registers.
- * remote-est.c: Rewrite to use new monitor conventions.
- * config/m68k/est.mt (TDEPFILES): Add monitor.o.
- * config/m68k/tm-est.h: Set NUM_REGS to 18.
- * testsuite/gdb.base/break.exp: Lots of cleanups. Use gdb_test
- more thoroughly.
-
-Thu Mar 23 23:20:00 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * somsolib.c (som_solib_add): Handle case where a shared library
- referenced by a core file has sections without the SEC_ALLOC bit
- set (eg stabs sections).
-
-Thu Mar 23 15:07:08 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * breakpoint.c (bpstat_do_actions): For each element in the bpstat
- chain, do all the commands regardless of whether they run the
- inferior.
-
-Wed Mar 22 19:17:06 1995 Doug Evans <dje@cygnus.com>
-
- * mem-break.c (LITTLE_BREAKPOINT, BIG_BREAKPOINT): Define as
- BREAKPOINT if mono-endian.
- (break_insn): Deleted.
- (big_break_insn, little_break_insn): Define.
- (memory_insert_breakpoint): Handle bi-endian cpus.
- (BREAKPOINT_LEN): Define.
- (memory_remove_breakpoint): Use it.
- (memory_breakpoint_size): Likewise.
-
-Tue Mar 21 17:03:17 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * sparc-stub.c: add nop after 'bg good_wim'.
- * sparcl-stub.c: ditto.
-
-Tue Mar 21 13:34:12 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * infrun.c (handle_command): Don't print TARGET_SIGNAL_0,
- TARGET_SIGNAL_UNKNOWN, or TARGET_SIGNAL_DEFAULT.
-
-Mon Mar 20 10:09:59 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * hppab-nat.c (store_inferior_registers): Sync with HPUX version.
-
-Mon Mar 20 07:34:48 1995 Stu Grossman (grossman@cygnus.com)
-
- * hppah-nat.c (store_inferior_registers): Move check for
- CANNOT_STORE_REGISTER to a better place. Fixes ptrace I/O errors
- found by test suite during function calls, which attempts to write
- unwritable registers.
-
-Sat Mar 18 02:02:24 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * mdebugread.c (parse_symbol): If finishing a function without
- known parameter type info, set that from parameter symbols.
- Remove commented-out add_param_to_type support.
-
-Thu Mar 16 16:38:03 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * xcoffread.c (process_linenos): Make sure filename we pass to
- start_subfile will cause deduce_language_from_filename to return
- the correct thing. Reindent function to GNU standards.
-
-Thu Mar 16 15:54:00 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * nlm/gdbserve.c (handle_exception): #if out call to StopBell,
- as it is not available on NetWare 3 or PIN.
- * nlm/ppc.c (StopBell): Removed.
-
-Thu Mar 16 12:14:41 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * xcoffread.c (read_xcoff_symtab): When creating a dummy parameter
- inferred from the traceback tags, give its type the name
- "<non-float parameter>".
-
- * stabsread.c (rs6000_builtin_type): Recognize types -31 to -34.
-
-Wed Mar 15 15:09:29 1995 Stu Grossman (grossman@cygnus.com)
-
- * findvar.c (read_register_bytes write_register_bytes): Make
- these routines much smarter about updating registers from the
- target, only doing so when absolutely necessary. This really
- speeds up register modification on some remote targets.
-
- * monitor.c: More cleanups. Get rid of monitor_load_ascii_srec.
- BFD makes this unnecessary. Lots of debugging speedups.
- * (expect): NULL terminate return string.
- * (monitor_open monitor_supply_register parse_register_dump
- monitor_wait monitor_fetch_register): Switch to using GNU regexp
- library to parse multi-register displays.
- * (monitor_read_memory): Read multiple bytes (up to 16) at once.
- * (monitor_create_inferior): Call clear_proceed_status to make run
- command notice first breakpoint.
- * (monitor_load): Clean up. Reset inferior_pid, set pc to start
- address and reset symbol table stuff to make loads put things into
- a fresh state.
- * (monitor_load_srec): Lower sleep time to 1 second.
-
- * monitor.h (struct monitor_ops): Add register_pattern and
- supply_register to monitor_ops.
-
- * rom68k-rom.c: Add new support for handling register dumps.
- * config/m68k/tm-m68k.h: Define D0_REGNUM and A0_REGNUM for register
- dump handling.
-
-Wed Mar 15 15:18:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * utils.c, defs.h (putchar_unfiltered, fputc_unfiltered): Make
- argument be an int, not a char. Using a prototype followed by an
- old-style function definition in a case where an argument is
- widened is a GCC-ism not supported by the native AIX compiler.
-
-Wed Mar 15 12:22:35 1995 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * nlmstub.def: Removed, this was moved to nlm/gdbserve.def
- long ago.
-
- * configure.in (alpha-*-netware*): Removed configuration.
- * config/alpha/{alpha-nw.mt, gdbserve.mt, tm-alphanw.h}: Removed.
- * nlm/{README-ALPHA-NETWARE, aio.h, alpha-io.S, alpha-regdef.h,
- alpha.c, alpha.h, altdebug.h}: Removed.
-
- * nlm/gdbserve.c (main): Add support for processing BOARD=
- argument, deprecate NODE=.
-
-Wed Mar 15 10:58:26 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * c-exp.y (yylex): Make an empty character constant an error.
-
-Tue Mar 14 15:00:54 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * valops.c (value_arg_coerce): Do possible value_coerce_array
- before determining type argument to value_cast.
-
-Tue Mar 14 10:41:41 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * remote-es.c: Replace ignore with 0.
-
-Tue Mar 14 05:52:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * valops.c (value_repeat), eval.c (evaluate_subexp_standard):
- If VALUE_REPEATED is already set, just error out.
-
- * valops.c (value_cast, value_slice), parse.c (follow_types): Add
- FIXME-type-allocation comments.
-
- * gdbtypes.h (struct type): Fix comment about what units the
- TYPE_LENGTH is in.
-
-Mon Mar 13 18:27:25 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * ch-valprint.c (annotate.h): Include.
- * eval.c (evaluate_subexp_standard): Remove unused variable.
- (calc_f77_array_dims): Add parens to expression.
- * f-exp.y (yylex): Add parens to expression, remove unused label.
- * f-lang.h (calc_f77_array_dims): Declare.
- * f-valprint.c (f_val_print): Remove unused variables.
-
-Mon Mar 13 15:25:47 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
-
- * alpha-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't
- use the PDR, just examine prologues instead.
-
-start-sanitize-arc
-Fri Mar 10 16:13:18 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * config/tm-arc.h: Change arc register names.
-end-sanitize-arc
-
-Fri Mar 10 02:49:40 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- Fix problems with infinite recursion when printing a class
- that contains a static instance of the class.
- * cp-valprint.c (dont_print_vb_obstack): Renamed from
- dont_print_obstack, made static.
- (dont_print_statmem_obstack): New obstack, controls printing
- of static member classes.
- (_initialize_cp_valprint): Initialize it.
- (cp_print_static_field): New function, handles printing of
- static members.
- (cp_print_value_fields): New parameter dont_print_statmem to
- handle recursive printing of static member classes, use
- cp_print_static_field to handle printing of static members.
- * c-valprint.c (cp_print_value_fields): Update prototype and
- call to include additional dont_print_statmem parameter.
- * c-valprint.c, f-valprint.c (dont_print_obstack): Remove unused
- extern declaration.
-
- * alpha-tdep.c, findvar.c, infptrace.c: Include <string.h>.
-
- * config/alpha/tm-alpha.h (FRAME_FIND_SAVED_REGS): Call
- alpha_find_saved_regs if fi->saved_regs is still NULL.
-
- * elfread.c (elf_symtab_read): Ensure that the filename field
- of a minsym is nonempty. Ignore solib trampoline symbols from
- the main symbol table, they might have a bogus value.
-
- * procfs.c (set_proc_siginfo), config/alpha/alpha-osf2.mh:
- Fix typos in comments.
-
-Thu Mar 9 17:19:47 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
-
- * mdebugread.c (parse_symbol, psymtab_to_symtab_1): Initialize
- pdr.framereg field of MIPS_EFI_SYMBOL_NAME symbol to -1. That way
- we know whether the PDR ever got set.
- * mips-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't
- use the PDR, just examine prologues instead.
-
-Wed Mar 8 23:35:10 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * somsolib.c (som_solib_section_offsets): Get offset of text
- section right.
-
-Wed Mar 8 16:12:21 1995 Stu Grossman (grossman@cygnus.com)
-
-start-sanitize-gdbtk
- * gdbtk.c (gdb_get_breakpoint_info): Return error if breakpoint
- type is not bp_breakpoint.
-end-sanitize-gdbtk
-
- * source.c (forward_search_command reverse_search_command): Set
- convenience variable $_ to be the line # of the match.
- * symtab.c (decode_line_1): Allow convenience variables to be
- used in line specs (for breakpoints and such).
-
-Wed Mar 8 12:51:00 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * Makefile.in (VERSION): Bump to 4.14.1.
- * NEWS, README: Update for 4.14.
- * i386v-nat.c (i386_insert_aligned_watchpoint): Fix declaration.
- (i386_insert_nonaligned_watchpoint): Call aligned instead of
- generic watchpoint insertion.
-
-Tue Mar 7 19:26:10 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * valops.c (value_slice): Do COERCE_VARYING_ARRAY.
-
-Tue Mar 7 00:23:47 1995 Stu Grossman (grossman@cygnus.com)
-
- * monitor.c, array-rom.c, monitor.h, rom68k-rom.c: Move target_ops
- into monitor.c.
- * monitor.c (monitor_create_inferior): Allow run command to start
- program.
-
- * monitor.c (monitor_load): Set PC to start address when done
- loading.
-
- * array-rom.c, monitor.h, rom68k-rom.c: Clean up target_ops.
- Remove ref to monitor_create_inferior.
-
- * monitor.c: More general cleanups. Add prototypes, remove
- unused routines. Fix bug with wrong number of args to error().
-
- * main.c (main): Don't start up GUI when running under gdb mode
- in emacs.
-
- * Makefile.in: Add rules for monitor.o and rom68k-rom.o to make
- Sun make (with VPATH) work...
-
- * monitor.c, monitor.h, rom68k-rom.c: Serious cleanup to make IDP
- (rom68k) target work right.
- * array-rom.c, op50-rom.c, w89k-rom.c: Partial updates to new
- monitor.c interface. More work needs to be done here.
- * config/m68k/tm-monitor.h: Change DECR_PC_AFTER_BREAK to 0 to
- match the IDP monitor. Also, set NUM_REGS to 18 cuz there's no
- floating-point for this card.
-
- * serial.h, ser-go32.c, ser-go32-para.c, ser-mac.c, ser-tcp.c,
- ser-unix.c: Add SERIAL_SETSTOPBITS to set the number of stopbits
- (needed for IDP board?!?!?).
-
- * defs.h, utils.c, remote-hms.c, remote-pa.c, remote.c: Fix defs
- and usage of fputc_unfiltered and putchar_unfiltered. Eliminate
- putc_unfiltered (it's superfluous).
-
- * command.h, command.c, top.c: Add var_enum command type. It's
- like var_string but allows only only one of the specified strings.
-
-Mon Mar 6 15:03:59 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * valops.c (value_cast): Don't use backslash newline--pre-ANSI
- compilers (such as SunOS4 /bin/cc) don't generally support it
- except in some contexts.
-
-Fri Mar 3 17:42:48 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * valops.c (value_cast): Check for cast to array type *before*
- we coerce array to pointer (in case arg2 is already array).
-
- * valops.c (call_function_by_hand): Set using_gcc to 2 if using
- gcc2. Needed for REG_STRUCT_HAS_ADDR to work on sparc.
- Also check REG_STRUCT_HAS_ADDR for union, array and string types.
-
- * valops.c (call_function_by_hand): Re-arrange code for pushing
- paramaters on the stack so we can do better STACK_ALIGN.
-
- * valops.c (call_function_by_hand): Call error if the number
- of arguments is fewer than parameter types in function type.
-
-Fri Mar 3 17:13:05 1995 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-tdep.c (sparc_extract_struct_value_address): Move
- sparc64 support to here.
- (sparc64_extract_struct_value_address): Deleted.
- (dump_ccreg): Add a prototype so long long arg -> int.
- * sparc/tm-sp64.h (USE_STRUCT_CONVENTION): Define.
- (EXTRACT_STRUCT_VALUE_ADDRESS): Delete.
-
-Fri Mar 3 15:12:12 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * hpread.c (hpread_record_lines): New argument "offset". All
- callers changed. Use it to handle dynamic address relocation.
- (hpread_build_psymtabs): Adjust texthigh as we read each function
- debug symbol. Fix computation of texthigh.
- (hpread_read_subrange_type): Work around macro bugs in HP's
- compilers.
- (hpread_process_one_debug_symbol): Correctly map source lines.
-
- * somread.c (check_strange_names): Filter names emitted by the HP
- compiler when generating PIC code.
-
- * valops.c (value_struct_elt_for_reference): Work around macro
- bugs in HP's compilers.
- * c-exp.y (block): Likewise.
-
-Fri Mar 3 12:27:28 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
-
- * rs6000-tdep.c (push_dummy_frame): Fix order of arguments to
- store_address.
-
- * utils.c [_AIX]: Include stddef.h instead of #defining size_t.
-
-Fri Mar 3 12:33:24 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * rs6000-tdep.c (skip_prologue): Skip multiple stores of the saved
- registers that GCC emits on the PowerPC by default in addition to
- the store multiple instruction used on the Power series.
-
-Fri Mar 3 00:54:58 1995 Doug Evans <dje@canuck.cygnus.com>
-
- * sparc-tdep.c (decode_asi): New function.
- (sparc_print_register_hook): Pretty print more v9 registers.
- * sparc/tm-sp64.h (REGISTER_NAMES): Fix some typos.
-
-Thu Mar 2 22:20:22 1995 Doug Evans <dje@canuck.cygnus.com>
-
- * dwarfread.c (struct dieinfo): Use CORE_ADDR for at_{low,high}_pc.
- (target_to_host): Change result type to CORE_ADDR.
-
-Thu Mar 2 15:13:04 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * rs6000-tdep.c: Fix byte-swapping sins.
-
-Thu Mar 2 16:48:45 1995 Michael Meissner <meissner@cygnus.com>
-
- * rs6000-tdep.c (branch_dest): Minor code cleanup, don't share
- code between branch unconditional and branch conditional cases.
-
-Wed Mar 1 09:41:26 1995 Doug Evans <dje@canuck.cygnus.com>
-
- Various changes for sparc64.
- * sparc-tdep.c (NUM_SPARC_FPREGS): Define.
- (SPARC_INTREG_SIZE): Define.
- (*): Use SPARC_INTREG_SIZE instead of REGISTER_RAW_SIZE (intreg)
- where appropriate.
- (enum branch_type): New value `done_retry'.
- (isbranch): Renamed from isannulled. All callers changed.
- Support new sparc64 branch insns.
- (single_step): Handle done_retry.
- (sparc_extract_struct_value_address): Don't assume 4 byte regs.
- (get_saved_register): Likewise.
- (sparc_push_dummy_frame): Likewise.
- (sparc_frame_find_saved_regs): Likewise.
- (sparc_pop_frame): Likewise. Don't refer to FPS_REGNUM, CPS_REGNUM,
- or PS_REGNUM if not sparc64. sparc64 has 64 fp regs.
- (sparc64_extract_struct_value_address): New function.
- (dump_ccreg, sparc_print_register_hook): Likewise.
- * sp64-tdep.c: Deleted.
- * sparc/tm-sp64.h (GDB_TARGET_IS_SPARC64): Define.
- (NUM_REGS): Reduce by 2, cle/tle are in the pstate reg.
- (CC_HAS_LONG_LONG): Define.
- (REGISTER_NAMES): Delete cle/tle and reorganize.
- (PS_REGNUM, FPS_REGNUM, CPS_REGNUM): Delete, they're ifdef'd out of
- sparc-tdep.c now.
- (REGISTER_BYTES): Update.
- (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Delete.
- (EXTRACT_RETURN_VALUE): Delete. Use definition in tm-sparc.h.
- (NO_SINGLE_STEP): Likewise.
- * sparc/tm-sparc.h (EXTRACT_VALUE_RETURN): Don't assume 4 byte regs.
- * sparc/sp64.mt: Move simulator support ...
- * sparc/sp64sim.mt: ... to here.
-
-Wed Mar 1 13:14:42 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * remote-vx960.c: new file for target specific register packaging.
- * remote-vx68.c: ditto.
- * config/i960/vxworks960.mt: add remote-vx960.o.
- * config/m68k/vxworks68.mt: add remote-vx68.o.
-
-Wed Mar 1 13:42:49 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * remote.c (remote_wait): Make calls to strtol be type correct by
- passing the address of a char * pointer instead of an unsigned
- char *.
-
- * rs6000-tdep.c (push_dummy_frame): Cast sp to char * when calling
- write_memory to make things type correct.
-
-Wed Mar 1 12:17:31 1995 Michael Meissner <meissner@cygnus.com>
-
- * ch-exp.y, c-exp.y, f-exp.y, m2-exp.y (yy defines): Support the
- standard Linux yacc by adding more names to be redefined with a
- prefix.
-
-Tue Feb 28 22:55:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * hppa-tdep.c (pa_print_registers), monitor.c: Use
- extract_unsigned_integer and friends, not SWAP_TARGET_AND_HOST.
- * defs.h, findvar.c: Move SWAP_TARGET_AND_HOST back to findvar.c.
- Rename it to SWAP_FLOATING to make it clear it is no longer for
- integers.
-
-Tue Feb 28 14:38:39 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * defs.h (SWAP_TARGET_AND_HOST): check endianess at runtime not
- compile time.
-
-start-sanitize-arc
- * arc-tdep.c (_initialize_arc_tdep): set tm_print_insn according to
- processor.
- * remote-arc.c (arc_wait): when a processor stops, stop other two
- processors too.
- * remote-arc.c (switch_command): switch tm_print_insn.
-end-sanitize-arc
-
- * vx-share/ptrace.h: merge in WRS new ptrace requests.
-
- * defs.h: fix a syntax error.
-
- * a29k-tdep.c (get_longjmp_target): add this function, from WRS.
- * remote-vx.c: move read_register and write_register out to
- target specific files.
- * remote-vx29k.c (get_fp_contnets): add this function, from WRS.
-
- * defs.h: define SWAP_TARGET_AND_HOST macro.
- * findvar.c, monitor.c, hppa-tdep.c: remove definition of
- SWAP_TARGET_AND_HOST.
-
-Tue Feb 28 08:31:40 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * alpha-tdep.c (find_proc_desc): Only attempt to set
- PROC_LOCALOFF (found_heuristic) if found_heuristic is non-NULL.
-
-Mon Feb 27 11:56:32 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * monitor.c: General gcc -Wall lint cleanup and reformat.
- (monitor_command): If no args, send an empty command.
-
-Thu Feb 23 21:07:25 1995 Stu Grossman (grossman@cygnus.com)
-
- * monitor.c (monitor_load_ascii_srec): Add a one second sleep
- after send LOAD_CMD to prevent loss of first S-record.
-
-Tue Feb 21 20:48:42 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * valops.c (call_function_by_hand): Set using_gcc to 2 if gcc-2.
- Call error if too few arguments.
- If REG_STRUCT_HAS_ADDR (structs passed by invisible reference),
- copy and convert to reference *before* we calculate alignment.
- Also, make sure structs allocated for return values and invisible
- reference don't violate STACK_ALIGN.
-
-Tue Feb 21 23:29:59 1995 Per Bothner <bothner@rtl.cygnus.com>
-
- * ch-exp.y (expression_conversion): Recognize 'ARRAY () TYPE (EXPR)'
- (same as C's '(TYPE[])EXPR')
-
-Tue Feb 21 11:47:26 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * top.c (print_gdb_version): Update the year.
-
-Sun Feb 19 14:31:57 1995 Jim Kingdon <kingdon@rtl.cygnus.com>
-
- * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Look for newlib in
- `..' not in `../..'.
-
-Sun Feb 19 11:05:28 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * procfs.c (unconditionally_kill_inferior): Don't issue a PIOCKILL
- in addition to a PIOCSSIG to kill the inferior.
-
-Thu Feb 16 15:06:12 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * parse.c (follow_types): Given (TYPE[]) (i.e. with no length),
- create a 0-length array type, and set BOUND_CANNOT_BE_DETERMINED.
- * valops.c (value_cast): If a cast like (TYPE[])VALUE (i.e. array
- of unknown length) use sizeof(VALUE)/sizeof(TYPE) as the length.
- * c-typeprint.c (c_type_print_varspec_suffix): If array length
- is 0, print it, but not if upper_bound is BOUND_CANNOT_BE_DETERMINED.
-
-Thu Feb 16 16:06:50 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * dcache.c (insque, remque): Rewrite Linux support.
-
-Wed Feb 15 12:33:20 1995 Michael Meissner <meissner@tiktok.cygnus.com>
-
- * config/powerpc/tm-ppc-eabi.h (TEXT_SEGMENT_BASE): Define as 1.
-
- * dcache.c (insque, remque): If compiling in standard C on Linux,
- protect insque and remque with macros to cast the pointer
- arguments to the proper type.
-
-Tue Feb 14 17:16:41 1995 Stu Grossman (grossman@cygnus.com)
-
- * annotate.c, breakpoint.c, defs.h, top.c: Replace
- enable/disable_breakpoint_hook with modify_breakpoint_hook.
-start-sanitize-gdbtk
- * gdbtk.c: Ditto.
- * gdbtk.c: General cleanups, get rid of unused variables. Redo
- handling of stdout/stderr to just return output as the result of
- the tcl command that caused the output. Cleanup -Wall stuff.
- * (breakpoint_notify): Now returns just action and breakpoint
- number.
- * (gdb_get_breakpoint_list): New routine. Does the obvious.
- * (gdb_get_breakpoint_info): Mostly derived from the old
- breakpoint_notify, but returns lots more info.
- * (dsprintf_append_element): Helper routine, works like printf,
- but appends a tcl element onto the specified DString. Good for
- building up lists as return values.
- * (gdbtk_enable/disable_breakpoint): Go away. Replaced with
- gdbtk_modify_breakpoint.
- * (*many routines*): Use new result protocol.
- * (call_wrapper): Make sure that recursive calls don't trash results.
- * gdbtk.tcl: New windows, autocmd, and breakpoints.
- * (gdbtk_tcl_fputs): Don't use $current_output_win redirection
- anymore. It's not needed (in fact, this routine may not be needed
- anymore).
- * (gdbtk_tcl_breakpoint): Change to reflect new breakpoint
- notification protocol.
- * (gdbtk_tcl_busy gdbtk_tcl_idle): Straighten out buttons, remove
- catches.
- * (interactive_cmd): Use this wrapper around button invocations
- of many commands. This will catch errors and put the results into
- the command window. It also updates all the other windows.
- * Also, change reliefs of most things to sunken. This actually
- looks better.
- * (create_file_win): Fix margin binding to allow breakpoints to
- work again.
- * (create_asm_win): Use return value of gdb_disassemble instead
- of implicit I/O to the command window.
- * (create_command_window): Use new result protocol to get output
- from commands.
-end-sanitize-gdbtk
-
-Tue Feb 14 16:58:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * expression.h: Move declaration of evaluate_subexp_with_coercion
- from here...
- * value.h: ...to here.
- * expression.h: Don't include value.h
-
-Tue Feb 14 11:46:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * expression.h: Move include of value.h until after declaration of
- enum exp_opcode.
-
-Sun Feb 12 13:47:30 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote-e7000.c: Comprehensive cleanup; removal of dead code,
- simplify code, declare things, format to standards.
- (inferior.h, value.h, command.h, remote-utils.h): Include.
- (e7000_login): Rename to e7000_login_command.
- (e7000_ftp): Rename to e7000_ftp_command.
- (e7000_drain): Rename to e7000_drain_command.
-
- * irix5-nat.c (string.h): Include near beginning of file.
-
-Sun Feb 12 12:36:38 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * valops.c (value_arg_coerce): Use VALUE_TYPE not SYMBOL_TYPE on
- arg, it is a value not a symbol.
-
- gcc -Wall lint:
- * eval.c: Move declaration of evaluate_subexp_with_coercion from here..
- * expression.h: ..to here.
- * expression.h: Include value.h.
- * ch-lang.c (evaluate_subexp_chill): Add default case in switch.
-
-Sun Feb 12 11:03:47 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * language.h (struct language_defn): New field evaluate_exp.
- * c-lang.c (c_language_defn, cplus_language_defn, asm_langauge_defn),
- f-lang.c (f_language_defn), language.c (unknown_language_defn,
- auto_language_defn, local_language_defn), m2-lang.c (m2_language_defn):
- Set evaluate_exp to evaluate_subexp_standard.
- * ch-lang.c (evaluate_subexp_chill): New function. Chill-specific
- support for MULTI_SUBSCRIPT.
- (chill_language_defn): Set evaluate_exp to evaluate_subexp_chill.
- * eval.c (enum noside): Move from here ....
- * expression.h (enum noside): ... to here.
- (evaluate_subexp_standard): New prototype.
- * eval.c (evaluate_subexp): Renamed to evaluate_subexp_standard.
- Removed lo-longer-needed test for chill_varying_type.
- (evaluate_subexp): New. Calls exp->language_defn->evaluate_exp.
-
- * ch-exp.y (maybe_expression_list): New non-terminal.
- (primitive_value): Allow empty parameter list.
-
-Sun Feb 12 10:02:16 1995 Per Bothner <bothner@cygnus.com>
-
- * buildsym.c (finish_block): If finishing a function without known
- parameter type info, set that from parameter symbols.
- * c-typeprint.c (c_type_print_varspec_suffix): For TYPE_CODE_FUNC,
- print parameter types, if available.
- * ch-typeprint.c (chill_type_print_base): Likewise.
-
- * gdbtypes.h (struct type): Remove function type field.
- (TYPE_FUNCTION_TYPE): Remove macro. We can't as simply re-use
- function types now that we're also storing parameter types.
- And the payoff is much less.
- * gdbtypes.c (make_function_type): Don't use/set TYPE_FUNCTION_TYPE.
- (recursive_dump_type): Don't print TYPE_FUNCTION_TYPE.
- * dwarfread.c (read_subroutine_type): Don't set TYPE_FUNCTION_TYPE.
-
- * valops.c (value_arg_coerce): Now takes param_type argument.
- (call_function_by_hand): Convert arguments with value_arg_coerce
- early, and overwrite original args with converted args.
- No longer need multiple calls to value_arg_coerce.
- (value_arg_push): Removed.
- * hppa-tdep.c (hppa_push_arguments): No longer call value_arg_coerce.
- * mips-tdep.c (mips_push_arguments): Likewise.
- * alpha-tdep.c (alpha_push_arguments): Likewise.
- * rs6000-tdep.c (push_arguments, ran_out_of_registers_for_arguments):
- Likewise.
- * value.h (value_arg_coerce): Remove declaration. (It's now static.)
-
- * valops.c (value_cast): Do COERCE_VARYING_ARRAY after COERCE_REF.
-
- * symtab.c (add_param_to_type): Remove (commented-out) function,
- since that functionality has been re-written.
- * coffread.c: Remove commented-out add_param_to_type support.
- * mdebugread.c (parse_symbol): Likewise.
- * stabsread.c (define_symbol): Likewise.
-
-Sun Feb 12 09:03:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * buildsym.c (start_subfile): Set language for f2c like for cfront.
-
-Thu Feb 9 20:20:11 1995 Rob Savoye <rob@darkstar.cygnus.com>
-
- * op50n-rom.c: Add the control registers.
-
-Thu Feb 9 15:46:39 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * Makefile.in (CLIBS): Add $(LIBIBERTY) before, in addition to
- after, any host/target/native libraries.
- * dcache.c (insque, remque): Remove declarations.
- * gdbtypes.h (type_code): Remove trailing comma.
-
- From Peter Schauer:
- * xcoffread.c (read_xcoff_symtab) [C_HIDEXT]: Move #ifdef
- STATIC_NODEBUG_VARS inside case.
-
-Thu Feb 9 07:43:41 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
-
- * config/sparc/tm-sun4sol2.h: Define STATIC_TRANSFORM_NAME.
- * partial-stab.h: Call it.
- * stabsread.c (define_symbol) [STATIC_TRANSFORM_NAME]: Call
- STATIC_TRANSFORM_NAME to get the name and use minimal symbols to
- get the address.
- * sparc-tdep.c (solaris_static_transform_name): New function.
-
-Thu Feb 9 12:09:09 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * somread.c (som_symtab_read): Handle dynamic relocation for both
- text and data symbols.
- (som_symfile_offsets): If objfile is a shared library, then get
- text and data offsets from the shared library structures.
- * somsolib.c (som_solib_add): Copy the bfd pointer from the
- objfile rather than reopening the file again.
- (som_solib_section_offsets): New function.
- * somsolib.h (som_solib_section_offsets): Declare.
-
-Wed Feb 8 20:32:18 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
-
- * config/sparc/tm-sun4sol2.h, dbxread.c: Rename
- N_SO_ADDRESS_MAYBE_MISSING to SOFUN_ADDRESS_MAYBE_MISSING.
- * symtab.h (minimal_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]: Add
- filename field.
- * elfread.c (record_minimal_symbol_and_info),
- minsyms.c, symtab.h (prim_record_minimal_symbol_and_info): Return
- newly created symbol.
- * elfread.c (elf_symtab_read) [SOFUN_ADDRESS_MAYBE_MISSING]:
- Set filename field of minimal symbol.
- * symmisc.c (dump_msymbols) [SOFUN_ADDRESS_MAYBE_MISSING]:
- Print filename field.
- * minsyms.c, symtab.h (lookup_minimal_symbol): New arg sfile.
- * symm-tdep.c, somsolib.c, hppa-tdep.c, c-exp.y, f-exp.y,
- m2-exp.y, nindy-tdep.c, m3-nat.c, irix5-nat.c, hpread.c,
- os9kread.c, breakpoint.c, alpha-tdep.c, valops.c, symtab.c,
- printcmd.c, dbxread.c: Change callers to pass NULL for sfile.
- * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]:
- Find address of function from minimal symbols.
- * partial-stab.h, case 'f', 'F': Call find_stab_function_addr
- instead of getting pst->textlow from the stab.
- * minsyms.c (find_stab_function_addr): New function.
-
-Wed Feb 8 19:19:56 1995 Rob Savoye <rob@darkstar.cygnus.com>
-
- * monitor.c: Fix so all the output shows up in the GUI command
- window.
-
-Mon Feb 6 18:50:59 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * i386-tdep.c (_initialize_i386_tdep): Put void decl on separate
- line, so init.c generation works correctly.
-start-sanitize-arc
- * arc-tdep.c (_initialize_arc_tdep): Ditto.
-end-sanitize-arc
-
-Mon Feb 6 14:44:36 1995 Rob Savoye <rob@darkstar.cygnus.com>
-
- * config/mips/idt.mt: Add support for the lsi33k target.
- * config/sparc/sun4sol2.mh: Add support for ser-tcp.
- * array-rom.c: Finish the rest of the support commands needed by
- GDB.
- * mips-tdep.c: Add LSI33k register names and processor type.
-
-start-sanitize-gdbtk
-Sun Feb 5 20:32:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * gdbtk.c (gdb_disassemble): Deference pointer to function before
- calling it (pre-ANSI compilers generally require this).
-
-end-sanitize-gdbtk
-Sat Feb 4 13:29:52 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * config/m68k/est.mt (TDEPFILES): Remove m68k-pinsn.o.
-
-Fri Feb 3 16:47:31 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * ser-go32-para.c (dos_read): fix syntax errors.
-
-Fri Feb 3 11:19:20 1995 Stu Grossman (grossman@cygnus.com)
-
- * core.c (dis_asm_read_memory), defs.h, top.c: Get rid of
- dis_asm_read_memory_hook. We can now call the disassemblers
- directly and have no need for this hook anymore.
-start-sanitize-gdbtk
- * gdbtk.c (gdb_disassemble): Ditto.
-end-sanitize-gdbtk
- * defs.h, printcmd.c: Make print_insn be static.
-
- * ser-go32.c (dos_comisr): Make this 8 bit clean.
- * (dos_open dos_close): Allow multiple opens to the same device.
- Use a ref count to prevent unwanted deallocations.
- * sparcl-tdep.c: Put #ifdefs around all socket stuff to make GO32
- happy.
- * (sparclite_ops): Switch to download_stratum.
- * target.h (enum strata): Move download_stratum before
- process_stratum so that executable targets get pushed on top of
- download targets.
-
-Thu Feb 2 19:02:45 1995 Rob Savoye <rob@darkstar.cygnus.com>
-
- * array-rom.c: Remove the non GDB remote protocol config stuff.
-
- * monitor.c: All reading/writing functions for memory and
- registers work.
-
-Thu Feb 2 16:11:04 1995 Kung Hsu <kung@mexican.cygnus.com>
-
-start-sanitize-arc
- * config/arc/arc.mt: new target makefile for arc processor.
- * config/arc/tm-arc.h: new target header for arc processor.
- * config/arc/go32.mh: new go32 host makefile for arc processor.
- * config/arc/xm-go32.h: new go32 host header for arc processor.
- * arc-tdep.c: new target dependent codes for arc processor.
- * remote-arc.c: new file for arc-specific protocol through
- parallel line.
-end-sanitize-arc
- * ser-go32-para.c: new file for go32 parallel port communication.
-
-Thu Feb 2 13:58:40 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * Makefile.in (VERSION): Bump to 4.13.2.
-
-Thu Feb 2 07:27:56 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- Fix compiler warnings:
- * remote-e7000.c (printf_e7000debug): Rename to puts_e7000debug
- and have the caller do the sprintf. Saves us from varargs hell.
- (normal): Define before use.
- * remote-e7000.c: Reindent a few things.
-
-Wed Feb 1 21:16:42 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * f-typeprint.c (f_type_print_varspec_suffix): Print array index
- ranges in reverse order.
- * f-valprint.c (f77_create_arrayprint_offset_tbl): Fix calculation.
-
- * eval.c (evaluate_subscript): Don't call value_subscript, since
- it adjusts for lower bound and enforces ranges.
-
- * expression.h (exp_code): Remove MULTI_F77_SUBSCRIPT, OP_F77_SUBSTR.
- * eval.c, parse.c: Removed uses of removed opcodes.
- * eval.c (evaluate_subexp): Clean up handling of
- OP_UNDETERMINED_ARGLIST (no backtracking, more general).
-
- * f-valprint.c (f_val_print): Print TYPE_CODE_STRING using
- LA_PRINT_STRING, and not val_print_string (which reads from inferior).
-
- * ch-lang.c (chill_is_varying_struct), ch-lang.h: Remve function
- duplicate function made redundant by chill_varying_type.
-
- Re-write of f77 string and complex number support:
-
- * language.h (struct language_defn): New fields string_lower_bound
- and string_char_type.
- * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn),
- language.c (unknown_language_defn, auto_language_defn,
- local_language_defn), m2-lang.c (m2_language_defn), f-lang.c
- (f_language_defn), ch-lang.c (chill_language_defn): Set new fields.
- * gdbtypes.c (create_string_type): Use new string_char_type field.
- * valops.c (value_string): Use new string_lower_bound field.
-
- * defs.h (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT): Removed.
- * f-lang.c (f_create_fundamental_type, _initialize_f_language),
- m2-lang.c (m2_create_fundamental_type),
- gdbtypes.c (_initialize_gdbtypes): Set TYPE_TARGET_TYPE of complex
- types. Set their TYPE_CODEs to TYPE_CODE_COMPLEX.
- * mdebugread.c (mdebug_type_complex, mdebug_type_double_complex):
- Removed. Use builtin_type_complex and builtin_type_double_complex.
-
- * gdbtypes.h (enum type_code): Removed TYPE_CODE_LITERAL_STRING
- and TYPE_CODE_LITERAL_COMPLEX.
- * c-typeprint.c, f-typeprint.c, f-valprint.c, eval.c: Removed uses of
- TYPE_CODE_LITERAL_STRING and TYPE_CODE_LITERAL_COMPLEX.
- * gdbtypes.c, gdbtypes.h (f77_create_literal_complex_type,
- f77_create_literal_string_type): Removed.
- * value.h (VALUE_LITERAL_DATA, VALUE_SUBSTRING_MEMADDR,
- VALUE_SUBSTRING_MYADDR): Removed.
-
- * expression.h (enum exp_opcode): Rename OP_F77_LITERAL_COMPLEX to
- OP_COMPLEX.
- * parse.c: Update accordingly.
-
- * f-valprint.c (f77_print_cmplx): Removed.
- (f_val_print case TYPE_CODE_COMPLEX): Re-write to use print_floating.
-
- * f-exp.y (STRING_LITERAL): Use OP_STRING instead of OP_ARRAY.
- * eval.c (evaluate_subexp): For case OP_ARRAY, don't call
- f77_value_literal_string.
- * valops.c, value.h (f77_value_literal_string, f77_value_substring,
- f77_assign_from_literal_string, f77_assign_from_literal_complex):
- Removed.
- (value_assign): No longer need to handle literal types.
- * valops.c (f77_value_literal_complex), value.h: Re-written and
- renamed to value_literal_complex. Last arg is now a (complex) type.
- * valops.c (f77_cast_into_complex): Re-written and renamed to
- cast_into_complex.
- * eval.c (evaluate_subexp): Update accordingly.
-
- * ch-valprint.c (chill_val_print): On TYPE_CODE_STRING, don't
- print address for non-'s'-formats.
- * ch-typeprint.c, ch-valprint.c: Use chill_varying_type instead
- of chill_is_varying_struct.
-
-Wed Feb 1 13:27:33 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- gcc -Wall lint.
- * alpha-tdep.c (alpha_in_lenient_prologue): Comment out.
- (after_prologue): Remove unused local b.
- * procfs.c (thread.h): Include.
- (pr_flag_table, pr_why_table, faults_table, siginfo_table): Use
- nested braces in initializer.
- * top.c (initialize_targets, initialize_utils): Declare.
- (locate_arg, insert_args): Add parens around tested assignments.
- * remote-utils.c (sr_scan_args): Remove decl of strtol.
- * remote.c (thread.h): Include.
- (remote_wait): Remove unused local p2.
- * sparc-tdep.c (fill_gregset, fill_fpregset): Remove decls of
- registers array.
-
- defs.h (stdlib.h): Include.
- (exit, perror, atoi, qsort, memcpy, memcmp): Don't declare.
- (fclose, atof, malloc, realloc, free, strchr, strrchr, strstr,
- strtok, strerror): Don't specify parameter types in declaration.
-
-Wed Feb 1 12:23:57 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * ch-exp.y (value_string_element, string_primitive_value,
- start_element, left_element, right_element, slice_size,
- lower_element, upper_element, first_element): Removed.
- (value_string_slice, value_array_slice): Replaced by ...
- (slice): New non-terminal, with working slice support.
- (primitive_value_lparen, rparen): New non-terminals.
- (maybe_tuple_elements): New non-terminal, to allow empty tuples.
- (idtokentab): Added "up".
-
- * value.h (COERCE_VARYING_ARRAY): New macro.
- * valarith.c (value_subscript): Use it.
- * valops.c (value_cast): Likewise. Also, do nothing if already
- correct type, and allow converting from/to range to/from scalar.
-
- * valops.c, value.h (varying_to_slice, value_slice): New functions.
- * eval.c (OP_ARRAY): Add cast for array element.
- * expression.h (TERNOP_SLICE, TERNOP_SLICE_COUNT): New exp_opcodes.
- * valops.c (chill_varying_type): Moved function frp, here ...
- * gdbtypes.c (chill_varying_type), gdbtypes.h: ... to here.
- * parse.c (length_of_subexp, prefixify_subexp): Add support
- for TERNOP_SLICE, TERNOP_SLICE_COUNT.
- * expprint.c (print_subexp, dump_expression): Likewise.
- * eval.c (evaluate_subexp): Likewise.
-
- * eval.c (evaluate_subexp case MULTI_SUBSCRIPT): Don't call
- value_x_binop on a Chill varying string.
-
-Tue Jan 31 13:51:53 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * config/m68k/monitor.mt,
- config/pa/{hppabsd.mt,hppahpux.mt,hppaosf.mt,hppapro.mt}: Put
- depfiles in TDEPFILES not REMOTE_O.
-
-Tue Jan 31 11:14:44 1995 Steve Chamberlain <sac@splat>
-
- From nigel@algor.co.uk.
- * ser-go32.c (dos_close): Don't crash if scb null.
- (dos_sendbreak): New function.
- (dos_ops): Point to dos_sendbreak.
- (dos_info): Calculate COM number correctly.
-
-Tue Jan 31 09:40:11 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * xcoffread.c (process_xcoff_symbol): Use new variables
- func_symbol_type and var_symbol_type as type of functions and
- variables which don't have any stabs associated with them.
- Reindent most of function.
- (_initialize_xcoffread): Initialize *_symbol_type.
-
- * xcoffread.c (read_xcoff_symtab): Reindent most of function.
- Put C_HIDEXT symbols in the minimal symbols, rather than ignoring
- them (this part commented out as I didn't quite get it to work).
- (cs_to_section, find_targ_sec): New functions, to support above code.
- * xcoffread.c (RECORD_MINIMAL_SYMBOL): Only skip '.' if it is
- actually present.
-
-Mon Jan 30 17:34:24 1995 Stu Grossman (grossman@cygnus.com)
-start-sanitize-gdbtk
- * gdbtk.tcl (create_file_win): Disable old popup menu for source
- window.
-end-sanitize-gdbtk
- * sparcl-tdep.c: Add `sparclite' target for doing serial and udp
- downloads to SPARClite demo boards.
-
-Sun Jan 29 09:43:22 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * remote.c, remote-pa.c: Remove #if 0'd icache code. It has had
- no hope of working as is for a long time (in particular, shebs' 27
- Jan 95 change confuses the issue further--target_read_memory and
- xfer_core_file do *not* do the same thing in this context).
- Revise comment.
-
-Sat Jan 28 13:40:46 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * elfread.c (elf_symtab_read): Do not test BSF_GLOBAL for
- procedure linkage table symbols, it is no longer set due to the
- Jan 6 BFD change in bfd/elfcode.h.
-
-Fri Jan 27 17:08:06 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * top.c (use_windows): Clarify comments.
-
- * convex-tdep.c (xfer_core_file): Comment out.
- * config/convex/tm-convex.h (XFER_CORE_FILE): Remove.
- * remote.c, remote-pa.c (remote_fetch_word): Change xfer_core_file
- references to target_read_memory.
- * gdbcore.h (xfer_core_file, core_open, core_detach): Remove
- declarations.
- * corelow.c (core_open, core_detach): Make static.
-
- * arm-tdep.c: Make it compile.
- (exec_file_command, xfer_core_file): Comment out.
- (arm_print_insn): Remove, now in libopcodes.
- (skip_prologue): Comment out most of body.
- (arm_frame_find_saved_regs): Move here from tm-arm.h.
- (_initialize_arm_tdep): Set tm_print_insn.
- * config/arm/tm-arm.h: Remove old refs to first_object_file_end.
- (XFER_CORE_FILE): Remove.
- (FRAME_FIND_SAVED_REGS): Call arm_frame_find_saved_regs.
-
-Fri Jan 27 08:48:28 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * Makefile.in (CHILL_LIB): Define as in testsuite/Makefile.in.
-
-Thu Jan 26 18:24:41 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
-
- * symtab.c (find_pc_line): When subtracting one to get a line
- number, make sure not to end up with zero.
-
- * remote-vx.c: Revert all of Kung's changes of 16 Jan. The
- problems with those changes were (a) the file didn't compile, (b)
- they changed memset to bzero--memset is correct, (c) they took out
- code to deal with boards lacking floating point, (d) who knows
- what I didn't discover in a quick read.
-
-Thu Jan 26 17:32:54 1995 Stu Grossman (grossman@cygnus.com)
-
- * sparcl-tdep.c: Clean up formatting and indentation.
-
-Thu Jan 26 10:49:59 1995 Steve Chamberlain <sac@splat>
-
- * remote-hms.c (hms_ops): Change ref of hr_load_image
- to gr_load_image.
- (dcache_flush, dcache_hit, dcache_value, dcache_fetch,
- dcache_poke, dcache_init): Deleted.
- (hms_open, hms_resume, hms_fetch_word, hms_store_word):
- Use dcache routines provided by remote-util.h
-
-Thu Jan 26 12:08:31 1995 Michael Meissner <meissner@cygnus.com>
-
- * configure.in: Add support for powerpc-*-eabi.
-
- * powerpc/tm-ppc-eabi.h, powerpc/pcc-eabi.mt: New files for
- PowerPC support.
-
-Wed Jan 25 18:13:14 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * language.h (struct language_defn): New field c_style_arrays.
- * language.c (unknown_language_defn, auto_language_defn,
- local_language_defn), c-lang.c (c_language_defn, cplus_language_defn,
- asm_language_defn): Set c_style_arrays to true.
- * m2-lang.c (m2_language_defn), ch-lang.c (chill_language_defn),
- f-lang.c (f_language_defn): Set c_style_arrays to false.
- * valops.c (value_string): If c_style_array is not set,
- allocate string in gdb (not inferior) using allocate_value.
-
- * value.h (COERCE_ARRAY), valops.c (value_addr, value_arg_coerce):
- Only call value_coerce_array if current_language->c_style_arrays.
- * values.c: Add #include "language.h". (Needed for COERCE_ARRAY.)
-
- * valops.c (chill_varying_type): New predicate.
- * valops.c (value_cast): Support assigning a fixed string or array
- to a variable string/array structure.
-
- * valarith.c (value_subscripted_rvalue): Extra parameter lowerbound.
- Check index>=lowerbound, and then add lowerbound to index here,
- instead of in caller. Generalize to arbitrary lval_types.
- (value_subscript): Use enhanced value_subscripted_rvalue if
- c_style_arrays is false (and index is in range).
-
-start-sanitize-gdbtk
-Wed Jan 25 18:23:46 1995 Stu Grossman (grossman@cygnus.com)
-
- * gdbtk.c (gdbtk_init): Prevent segfault when gdbtk.tcl can't be
- found.
- * gdbtk.tcl: Initialize expr_update_list() to prevent errors when
- popping up expression window for the first time.
-end-sanitize-gdbtk
-
-Wed Jan 25 18:13:14 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * eval.c (evaluate_subexp case OP_ARRAY): Fix calls to memset:
- TYPE_LENGTH is length in bytes, not bits.
-
-Wed Jan 25 08:19:35 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * infrun.c (proceed): Flush stdout before resuming inferior.
- * infcmd.c (step_1), annotate.c (annotate_starting):
- Don't bother to flush here.
-
-Wed Jan 25 01:11:21 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * hpread.c (hpread_process_one_debug_symbol): Fix lines garbled
- by an ill-advised global search and replace.
-
-Tue Jan 24 12:10:28 1995 Stu Grossman (grossman@cygnus.com)
-
- * gdbtk.tcl (create_registers_window): Work around a radiobutton
- widget bug to make Options|Natural button work.
-
- * gdbtk.c (gdb_disassemble): Fix problem with source+assembly and
- g++ caused by out-of-order pc's.
- * gdbtk.tcl (files_command): Remove duplicate file names. Also,
- add scrollbar.
-
-Mon Jan 23 17:21:09 1995 Stu Grossman (grossman@cygnus.com)
-
- * gdbtk.tcl: Take .gdbtkinit if it exists. Makes gdbtk match the
- doc!
-
-Mon Jan 23 13:11:46 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- Add support for Chill bitstring literals (e.h. H'FF00').
- * ch-exp.y (match_bitstring_literal): Fix for proper endianness.
- * expprint.c (print_subexp): Don't call error on OP_BITSTRING,
- just print B'<unimlemented>'.
- * gdbtypes.c (create_set_type): Fix bug in length calculation.
- * valops.c, value.h (value_bitstring): New function.
- * eval.c (evaluate_subexp): Implement support for OP_BITSTRING.
-
- * ch-typeprint.c (chill_type_print_base): For TYPE_CODE_FUNC,
- check that return type is non-void, and print in proper Chill syntax.
-
-Mon Jan 23 12:20:34 1995 Rob Savoye <rob@darkstar.cygnus.com>
-
- * Makefile.in: Remove references to remote-mon.c.
- * remote-mon.c: remove. Replaced by rom68k-rom.c.
- * rom68k-rom.c: Support for Rom68k monitor.
-
-Mon Jan 23 10:50:57 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * Makefile.in (CHILL_FOR_TARGET): Update -L argument to point to
- gcc/ch/runtime not chillrt, since that is where the chill runtime
- lives now.
-
-Mon Jan 23 00:06:57 1995 Steve Chamberlain <sac@splat>
-
- * remote-hms.c (hms_load): Delete.
- (target_ops): Use hr_load_image.
-
- * remote-e7000.c, remote-z8k.c, remote-nindy.c (target_ops):
- Define memory_insert/remove_breakpoint.
- * xm-go32.h: Remove redundant SIGs.
-
-Thu Jan 19 20:26:58 1995 Steve Chamberlain <sac@splat>
-
- * ser-go32.c: Rewritten by nigel@algor.co.uk.
-
-Fri Jan 20 15:23:55 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * expression.h (OP_LABELED): New operator, for Chill
- labeled structre tuples.
- * ch-exp.y (tuple_element, named_record_element, tuple_elements):
- New non-terminals, to handle labeled structure tuples.
- (tuple): Re-define using tuple_elements.
- * eval.c (evaluate_labeled_field_init): New function, to handle
- initialization of structure fields, possibly using OP_LABELED.
- (evaluate_subexp): Use it.
- * expprint.c (print_subexp case): For OP_ARRAY, use Chill syntax
- for Chill. Handled OP_LABELED.
- * parse.c (length_of_subexp, prefixify_subexp): Handle OP_LABELED.
-
- * eval.c (evaluate_subexp): Handle Chill Powerset tuples.
- * valarith.c (value_bit_index): Just treat bitstring as represented
- by an array of bytes. Alignment is handled by compiler.
-
-Wed Jan 18 19:00:29 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * h8300-tdep.c (gdb_print_insn_h8300): Fix typo (&info -> info).
- * sh-tdep.c (gdb_print_insn_sh): Ditto.
-
-Wed Jan 18 11:25:43 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * remote-os9k.c (rombug_open): Fix a bug in exception handling
- command.
- * remote-os9k.c (rombug_write_inferior_memory): reset buffer after
- write.
-
-Tue Jan 17 09:48:38 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
-
- * parse.c (_initialize_parse): Improve wording of names of
- msym_*_symbol_type.
-
-Tue Jan 17 14:00:58 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
-
- * config/mips/tm-mips.h (enum mips_fpu_type): New enum.
- (mips_fpu): Change type to enum mips_fpu_type.
- (FIX_CALL_DUMMY): Handle mips_fpu == MIPS_FPU_SINGLE.
- * mips-tdep.c (mips_fpu): Change type to enum mips_fpu_type.
- Don't initialize.
- (mips_fpu_string): New static variable.
- (mips_push_dummy_frame): Handle mips_fpu == MIPS_FPU_SINGLE.
- (mips_pop_frame): Likewise.
- (mips_extract_return_value): Likewise.
- (mips_store_return_value): Likewise.
- (mips_set_fpu_command): New static function.
- (mips_show_fpu_command): New static function.
- (_initialize_mips_tdep): Change handling of set/show mipsfpu.
-
-Tue Jan 17 09:48:38 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
-
- * a29k-tdep.c (gdb_print_insn_a29k): Fix typo (&info -> info).
-
- * parse.c (write_exp_msymbol): Use new variables
- msym_*_symbol_type as type of msymbol expression.
- (_initialize_parse): Initialize them.
-
-Mon Jan 16 18:11:03 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- General cleanup and simplication of disassembler interface.
- * a29k-pinsn.c, arm-pinsn.c, convex-pinsn.c, gould-pinsn.c,
- hppa-pinsn.c, i386-pinsn.c, i960-pinsn.c, m68k-pinsn.c,
- m88k-pinsn.c, mips-pinsn.c, ns32k-pinsn.c, pyr-pinsn.c,
- rs6000-pinsn.c, sparc-pinsn.c, tahoe-pinsn.c, vax-pinsn.c: Remove.
- * gould-tdep.c, ns32k-tdep.c, tahoe-tdep.c, vax-tdep.c: New files,
- had been -pinsn.c files.
- * Makefile.in (ALLDEPFILES): Remove removed files.
- (a29k-pinsn.o, arm-pinsn.o, convex-pinsn.o, gould-pinsn.o,
- hppa-pinsn.o, i386-pinsn.o, i960-pinsn.o, m68k-pinsn.o,
- m88k-pinsn.o, mips-pinsn.o, ns32k-pinsn.o, pyr-pinsn.o,
- rs6000-pinsn.o, sparc-pinsn.o, tahoe-pinsn.o, vax-pinsn.o):
- Remove compile actions.
- * arm-tdep.o, gould-tdep.o, ns32k-tdep.o, tahoe-tdep.o,
- vax-tdep.o: Add compile actions.
- * defs.h (tm_print_insn): New global.
- * a29k-tdep.c (gdb_print_insn_a29k): New function.
- (_initialize_a29k_tdep): Rename from _initialize_29k,
- set tm_print_insn.
- * alpha-tdep.c (print_insn): Remove.
- (_initialize_alpha_tdep): Set tm_print_insn.
- * arm-tdep.c (arm_print_insn): New function, was print_insn
- in arm-pinsn.c.
- * convex-tdep.c (convex_print_insn): New function, was print_insn
- in convex-pinsn.c.
- * h8300-tdep.c (print_insn): Remove.
- (gdb_print_insn_h8300): New function.
- (_initialize_h8300_tdep): New function.
- * h8500-tdep.c (print_insn): Remove.
- (_initialize_h8500_tdep): New function.
- * hppa-tdep.c (_initialize_hppa_tdep): Set tm_print_insn.
- * i386-tdep.c (_initialize_i386_tdep): New function.
- * i960-tdep.c (mem, next_insn): New functions, were in
- i960-pinsn.c.
- (_initialize_i960_tdep): Set tm_print_insn.
- * m68k-tdep.c (_initialize_m68k_tdep): New function.
- * m88k-tdep.c (_initialize_m88k_tdep): New function.
- * mips-tdep.c (gdb_print_insn_mips): New function.
- (_initialize_mips_tdep): Set tm_print_insn.
- * pyr-tdep.c (pyr_print_insn): New function, was print_insn
- in pyr-pinsn.c.
- * rs6000-tdep.c (_initialize_rs6000_tdep): New function.
- * sh-tdep.c (print_insn): Remove.
- (gdb_print_insn_sh): New function.
- (_initialize_sh_tdep): Set tm_print_insn.
- * sparc-tdep.c (_initialize_sparc_tdep): New function.
- * w65-tdep.c (print_insn): Remove.
- (_initialize_w65_tdep): New function.
- * z8k-tdep.c (print_insn): Remove.
- (gdb_print_insn_z8k): New function.
- (_initialize_z8k_tdep): Set tm_print_insn.
- * printcmd.c (print_insn): New function, generic disassembler.
- * config/*/*.mt (TDEPFILES): Remove refs to *-pinsn.o.
-
-Mon Jan 16 15:43:29 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * Makefile.in: add new files remote-vx29k.c, config/a29k/tm-vx29k.h,
- and config/a29k/vx29k.mt.
- * configure.in: add new configuration a29k-*-vxworks.
- * remote-vx29k.c: new file merged from WRS.
- * remote-vx.c: merge changes from WRS.
- * config/a29k/vx29k.mt: new file for new configuration.
- * config/a29k/tm-vx29k.h: new header file for newconfiguration.
-
-Sun Jan 15 14:36:19 1995 Steve Chamberlain <sac@splat>
-
- * breakpoint.h (disable_breakpoint, enable_breakpoint):
- New declarations.
- (enum bpdisp): Change name of 'delete' member to 'del'.
- (struct bpstat): Changed name to 'bpstats'.
- * breakpoint.c (disable_breakpoint, enable_breakpoint,
- breakpoint_chain): Made globally visible.
- (bpstat_stop_status): Use new name for bpstat.
- (break_command_1, watch_command_1, catch_command_1,
- breakpoint_auto_delete, denable_delete_breakpoint): Use 'del'
- instead of 'delete'.
- (set_breakpoint_sal): New function.
- * defs.h (registers_changed_hook): New declaration.
- * infcmd.c (run_stack_dummy): 'delete' is now 'del'.
- * inflow.c (new_tty): Treat WIN32 in same way as __GO32__
- * main.c (main): Don't scan options when in WIN32 and exit
- without entering main loop.
- * m2-exp.y (m2_elx): Member 'class' is now 'aclass'.
- * symtab.h (struct symbol, struct partial_symbol): Changed name of
- member 'class' to 'aclass'.
- (SYMBOL_CLASS, PSYMBOL_CLASS): Reflect change.
- * top.c (registers_changed_hook): New definition.
- * utils.c (quit, notice_quit, initialize_utils): Treate WIN32
- in same way as __GO32__.
- * value.h (c_typedef_print): Rename 'new' argument.
-
- * w65-tdep.c, config/tm-w65.h, config/w65.mt: New files.
- * configure.in: Suppprt for w65,
-
-
-Sat Jan 14 11:18:11 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
-
- * infcmd.c (signal_command): For "signal 0", pass (CORE_ADDR)-1,
- not stop_pc, to proceed.
-
- * eval.c (evaluate_subexp): Clear expect_type except for C++ and CHILL.
-
-Fri Jan 13 17:52:57 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
-
- * infcmd.c (signal_command): Accept "signal 0"; the change to not
- accept it was accidental. "handle 0" and "info signal 0" remain
- illegal, though.
-
-Fri Jan 13 15:19:01 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * Makefile.in (all): Don't make libgdb-files.
- (libgdb): New action, makes libgdb-files.
-
-Thu Jan 12 21:23:25 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * stabsread.c (read_enum_type): When pending enum symbols are
- put into the enum type, they must be inserted in "backwards
- order, in case we've overflowed a struct pending buffer.
-
-start-sanitize-gdbtk
-Thu Jan 12 15:02:40 1995 Stu Grossman (grossman@cygnus.com)
-
- * gdbtk.c, gdbtk.tcl: Update/add copyright.
- * gdbtk.tcl (build_framework): Several fixes for filespec widget,
- including dismiss button, and better error handling.
- * (create_command_win): Bind button 2 to retrieve selection.
-end-sanitize-gdbtk
-
-Thu Jan 12 09:33:24 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * README: Add note about SPARCworks cc release 3.0 and higher.
-
- Add procfs support for Alpha OSF/1-2.x.
- * config/alpha/nm-osf.h: Renamed from nm-alpha.h, generic
- OSF/1 native support.
- * config/alpha/alpha-osf1.mh (NAT_FILE): Changed accordingly.
- (MUNCH_DEFINE): Removed.
- * config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h: New files
- for procfs support.
- * configure.in (alpha-dec-osf*): Use alpha-osf2.mh for OSF/1
- release 2.x and higher, else alpha-osf1.mh, as the procfs support
- in release 1.x is incomplete.
- * Makefile.in (ALLCONFIG): Add config/alpha/alpha-osf2.mh.
- * alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset,
- fill_fpgregset): New routines for procfs support.
- * inftarg.c (_initialize_inftarg): Don't add ptrace support
- if we have an optional procfs and /proc is accessible.
- * procfs.c: Include sys/fault.h and sys/syscall.h before
- including sys/procfs.h.
- (unconditionally_kill_inferior): If PROCFS_NEED_PIOCSSIG_FOR_KILL
- is defined, additionally perform a PIOCSSIG to really terminate
- the inferior.
- (create_procinfo): Always return a result.
- (create_procinfo, do_attach): Don't trace T_IFAULT faults if
- PROCFS_DONT_TRACE_IFAULT is defined.
- (procfs_init_inferior): Use START_INFERIOR_TRAPS_EXPECTED as
- argument to startup_inferior if it is defined.
- (proc_set_exec_trap): If PIOCSSPCACT is defined, use it instead
- of tracing exits from exec system calls. Needed for the user level
- loader under Alpha OSF/1.
- (do_detach): Clear any pending signal if we want to detach from
- a process without a signal.
- (set_proc_siginfo): If PROCFS_DONT_PIOCSSIG_CURSIG is defined,
- don't issue a PIOCSSIG if pr_cursig already contains the signal we
- intend to set.
- (info_proc_signals): If PROCFS_SIGPEND_OFFSET is defined, the
- pending signals are numbered from 1 instead of 0.
- (info_proc_mappings): Increase size of output format for addresses
- if BFD_HOST_64_BIT is defined.
- (procfs_stop): Renamed from child_stop.
- (_initialize_procfs): Don't add procfs support if we have an
- optional procfs and /proc is not accessible.
-
-start-sanitize-gdbtk
-Wed Jan 11 17:06:55 1995 Stu Grossman (grossman@cygnus.com)
-
- * gdbtk.tcl: Add button to control mixed source disassembly.
- Use text widgets in expr window. The give me more control over
- layout.
- Add auto-updating of exprs in expression window.
- Handle expressions out of scope a bit better.
- Make selected window pop up to the top when invoked via the
- menubar.
- Make copyright message have raised relief.
-
- * gdbtk.c (gdbtk_init): Improve handling for errors in gdbtk.tcl
- during startup.
-end-sanitize-gdbtk
-
-Wed Jan 11 17:53:26 1995 Rob Savoye <rob@darkstar.cygnus.com>
-
- * array-rom.c: Add support for most commands.
-
- * monitor.c: Add GDB remote protocol for the hybrid environment on
- the Array board.
-
-Wed Jan 11 00:44:01 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * command.c (show_user_1): Use print_command_line to show a user
- defined command (including control structures).
-
- * top.c (init_main): Change documentation for user defined
- commands to indicate they may accept up to ten arguments.
-
-Tue Jan 10 16:22:41 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
-
- * mips-tdep.c (mips_skip_prologue): Accept or as well as addu for
- `move $s8, $sp' instruction.
-
-Sun Jan 8 12:45:34 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
-
- * target.c, target.h (target_signal_from_command): New function.
- * infrun.c (handle_command, signals_info), infcmd.c
- (signal_command): Use it.
- * infrun.c, infcmd.c: Update docstrings for these commands.
-
- * target.h (enum target_signal), target.c (signals), target.c
- (target_signal_from_host, target_signal_to_host): Add
- TARGET_SIGNAL_REALTIME_* and TARGET_SIGNAL_PRIO for lynx.
- * config/tm-lynx.h: Define signal numbers for realtime events.
-
-Sat Jan 7 07:23:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
-
- * dbxread.c (process_one_symbol): Handle N_FUN symbols
- for Sun acc 3.0 under SunOS4.
-
- Changes to improve handling of runtime common symbols
- under SunOS4.
- * minsyms.c (get_symbol_leading_char): New routine to determine
- the leading symbol character for an objfile.
- (prim_record_minimal_symbol_and_info, install_minimal_symbols):
- Use it.
- * objfiles.h (rt_common_objfile): New global, points to objfile
- containing the runtime common minimal symbols.
- * objfiles.c (free_objfile): Mark rt_common_objfile as
- unallocated before freeing it.
- * solib.c (allocate_rt_common_objfile): New routine to allocate
- an objfile for the runtime common minimal symbols.
- (solib_add_common_symbols): Allocate an objfile for the runtime
- common symbols if necessary and put common symbols into it.
- Clean up code and comments.
- (solib_add, special_symbol_handling): Cleanup comments regarding
- runtime common symbols.
- * stabsread.c (scan_file_globals_1): New routine, contains
- old scan_file_globals code. Checks if there are any unresolved
- global symbols before starting the expensive minimal symbol table
- search.
- (scan_file_globals): Now calls scan_file_globals_1 for the passed
- objfile and eventually for the runtime common objfile. Complains
- about any unresolved global symbols and removes them from the
- global symbol chain to avoid dangling pointers into the symbol
- table if the symbol table is reread.
-
-Thu Jan 5 17:38:29 1995 Stu Grossman (grossman@cygnus.com)
-
- * Makefile.in (install_only uninstall): Indent for clarity.
-
- * core.c (dis_asm_read_memory): Add call to
- dis_asm_read_memory_hook to provide alternate way for disassembler
- to read memory.
-
- * defs.h: Protect from multiple inclusion. Add decl for
- dis_asm_read_memory_hook.
-
- * top.c: Make window startup be the default.
- * Add dis_asm_read_memory_hook.
-
-start-sanitize-gdbtk
- * gdbtk.c (finish_saving_output): Don't do anything if not saving
- output.
- * (breakpoint_notify): Don't send null filename to tcl.
- * (gdb_eval): New tcl command to eval an expression.
- * (gdb_disassemble): New tcl command to do disassembly. This
- allows tcl code to choose between exec file and target memeory,
- and can also do mixed source and assembly.
- * (gdbtk_init): Move reading of gdbtk.tcl to the end to make sure
- that more of the environment is set up. Also, create link between
- gdb and tcl vars disassemble{-_}from{-_}exec.
-
- * gdbtk.tcl: New expression window support.
- * Make assembly window be 80 columns wide.
- * Use new disassembly method. Add menu items to select
- disassembly from exec file or target.
- * Change View menubar item to Options.
-
- * Get rid of Stack, Breakpoints, Signals, and Variables Windows,
- since they don't exist yet.
-
- * Pop up a copyright window on startup.
-end-sanitize-gdbtk
-
-Thu Jan 5 01:16:40 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * stabsread.c (define_symbol): Handle `a' symbol type used for
- reference parameter passed in a register.
-
-start-sanitize-gdbtk
-Wed Jan 4 19:49:10 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * gdbtk.tcl (build_framework): Add standard commands menu, more
- windows to standard windows menu.
- (not_implemented_yet): Clarify message.
-end-sanitize-gdbtk
-
-Wed Jan 4 12:27:29 1995 Kung Hsu <kung@mexican.cygnus.com>
-
- * defs.h: move include tm.h up, so that the type LONGEST can
- also based on the target requirement to determine. In this case
- target mips64.
-
- * remote-os9k.c (rombug_open): catch exception e in rombug.
- * remote-os9k.c (rombug_wait): print message before register display
- from rombug.
-
-Wed Jan 4 09:18:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
-
- * top.c (locate_arg): Call strchr not index.
-
-Tue Jan 3 16:52:03 1995 Per Bothner <bothner@kalessin.cygnus.com>
-
- * ch-exp.y (literal): Recognize NULL.
- (tuple): Parse simple unlabelled tuples.
- * eval.c (evaluate_subexp case OP_ARRAY): Use expect_type to
- evaluate brace-initializer-expressions depending on context.
- (evaluate_subexp case UNOP_CAST): Pass the target type as
- expected type when evaluating the expression.
-
- * ch-typeprint.c (chill_type_print_base): Get names of PTR and
- BOOL from TYPE_NAME.
- * ch-valprint.c (chill_print_type_scalar): New function, to handle
- TYPE_CODE_RANGE better than print_type_scalar does.
- (chill_val_print_array_elements): Use above new function.
-
-Mon Jan 2 15:02:51 1995 Stan Shebs <shebs@andros.cygnus.com>
-
- * remote-udi.c (udi_load): Tell symbol_file_add that the
- program being loaded is the main program.
-
-For older changes see ChangeLog-94
+For older changes see ChangeLog-95
\f
Local Variables:
mode: indented-text
projects / binutils-gdb.git / commitdiff