\end{columns}
\end{frame}
+\subsubsection{Scripting in map modules}
+
+\begin{frame}{\subsubsecname}
+\begin{itemize}
+\item The special wires {\tt \_TECHMAP\_DO\_*} can be used to run Yosys scripts
+in the context of the replacement module.
+\medskip
+\item The wire that comes first in alphatecial oder is interprated as string (must
+be connected to constants) that is executed as script. Then the wire is removed. Repeat.
+\medskip
+\item You can even call techmap recursively!
+\medskip
+\item Example use-cases:
+\begin{itemize}
+\item Using always blocks in map module: call {\tt proc}
+\item Perform expensive optimizations (such as {\tt freduce}) on cells where
+this is known to work well.
+\item Interacting with custom commands.
+\end{itemize}
+\end{itemize}
+\end{frame}
+
+\begin{frame}[t]{\subsubsecname{} -- Example}
+\vbox to 0cm{
+\vskip4.2cm
+\hskip0.5cm\includegraphics[width=10cm,trim=0 0cm 0 0cm]{PRESENTATION_ExAdv/mymul.pdf}
+\vss
+}
+\vskip-0.6cm
+\begin{columns}
+\column[t]{6cm}
+\vskip-0.6cm
+\lstinputlisting[basicstyle=\ttfamily\fontsize{8pt}{10pt}\selectfont, language=verilog]{PRESENTATION_ExAdv/mymul_map.v}
+\column[t]{4.2cm}
+\vskip-0.6cm
+\lstinputlisting[basicstyle=\ttfamily\fontsize{8pt}{10pt}\selectfont, frame=single, language=verilog]{PRESENTATION_ExAdv/mymul_test.v}
+\lstinputlisting[basicstyle=\ttfamily\fontsize{8pt}{10pt}\selectfont, frame=single, language=ys, lastline=5]{PRESENTATION_ExAdv/mymul_test.ys}
+\lstinputlisting[basicstyle=\ttfamily\fontsize{7pt}{8pt}\selectfont, frame=single, language=ys, firstline=7, lastline=12]{PRESENTATION_ExAdv/mymul_test.ys}
+\end{columns}
+\end{frame}
+
\subsubsection{TBD}
\begin{frame}{\subsubsecname}
-all: select_01.pdf red_or3x1.pdf sym_mul.pdf
+all: select_01.pdf red_or3x1.pdf sym_mul.pdf mymul.pdf
select_01.pdf: select_01.v select_01.ys
../../yosys select_01.ys
sym_mul.pdf: sym_mul_*
../../yosys sym_mul_test.ys
+mymul.pdf: mymul_*
+ ../../yosys mymul_test.ys
+
--- /dev/null
+module MYMUL(A, B, Y);
+ parameter WIDTH = 1;
+ input [WIDTH-1:0] A, B;
+ output reg [WIDTH-1:0] Y;
+
+ wire [1023:0] _TECHMAP_DO_ = "proc; clean";
+
+ integer i;
+ always @* begin
+ Y = 0;
+ for (i = 0; i < WIDTH; i=i+1)
+ if (A[i])
+ Y = Y + (B << i);
+ end
+endmodule
--- /dev/null
+read_verilog mymul_test.v
+hierarchy -check -top test
+
+techmap -map sym_mul_map.v \
+ -map mymul_map.v;;
+
+rename test test_mapped
+read_verilog mymul_test.v
+miter -equiv test test_mapped miter
+flatten miter
+
+sat -verify -prove trigger 0 miter
+
+splitnets -ports test_mapped/A
+show -prefix mymul -format pdf -notitle test_mapped