+Thu Nov 3 17:44:47 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
+
+ Changes from net 2.5.2 release branch:
+
+ * configure.in: Put AC_DEFINE(sparcv9) on its own line, so that
+ the shell variable settings associated with it are permanent. For
+ CPUs requiring bfd_gas=yes, select it based on CPU only, not
+ individual target names. Handle m68k-hp-hpux*, not just -hpux.
+
+ * config/tc-z8k.c (tc_coff_symbol_emit_hook): Add dummy argument
+ to match prototype in obj-coff.h.
+
+ * configure.in: Skip tests for defining WANT_FOPEN_BIN and
+ IBM_COMPILER_SUX.
+ * acconfig.h: Deleted them.
+ * configure, conf.in: Rebuild with autoconf 2.0.
+ * config/go32.cfg, config/vms-conf.h: Updated.
+
+ * config/tc-m68k.c (md_apply_fix_2, md_convert_frag_1): Always use
+ IBM_COMPILER_SUX version of code, with comments indicating why.
+
+ * listing.c (file_info): Use text mode when opening file for read.
+ Use "r" directly, no macro.
+ * input-file.c (input_file_open): Don't use FOPEN_RT, just use
+ "r".
+ * read.c (s_include): Ditto.
+ * output-file.c (output_file_create): Try both "wb" and "w", don't
+ bother with FOPEN_* macros.
+ * as.h: Don't include fopen-*.h.
+
+ * config/alpha-opcode.h: Make "ret" with no operands equivalent to
+ "ret zero,(ra)", to match OSF1 and to be consistent with both
+ one-operand forms.
+
+ Patches from DJ Delorie:
+ * as.h (alloca): undef alloca before defining it just in case
+ * config/go32.cfg: new file for autoconf values
+ * config/te-go32.h: new file
+ * configure.bat: new for autoconf
+
+ * config/tc-i386.c (md_assemble): Fix typo in GOTPC check; had =
+ for ==.
+
+ * configure.in: If target_frag doesn't exist, use /dev/null.
+
+ * as.c (parse_args): For non-VMS systems, re-add `v' to
+ std_shortopts. Add "verbose" to list of long options.
+
+ * write.c (adjust_reloc_syms): When generating an absolute section
+ symbol as a placeholder, don't mark it as used in a relocation
+ entry, here.
+
+ * Makefile.in (comparison): Compare using makefile code from gcc,
+ stripped down to discard subdir stuff and adapted to give a
+ non-zero exit status if either file differs.
+
Thu Nov 3 15:43:02 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
* config/tc-mips.c (load_address): Fix RELAX_ENCODE arguments for
includedir = $(prefix)/include
docdir = $(datadir)/doc
-VERSION=cygnus-2.4.90
+VERSION=cygnus-2.5
SHELL = /bin/sh
AR = ar
AR_FLAGS = qv
-BISON = bison
+BISON = bison -y
MAKEINFO = makeinfo
TEXI2DVI = texi2dvi
RANLIB = ranlib
diststuff: $(DISTSTUFF)
clean-here:
- -rm -f $(STAGESTUFF) core
+ -rm -f $(STAGESTUFF) core stamp-mk.com
clean mostlyclean: clean-here
@cd doc ; $(MAKE) $(FLAGS_TO_PASS) $@
else true; fi
-rm -f config.status Makefile targ-env.h targ-cpu.h \
targ-cpu.c obj-format.h obj-format.c atof-targ.c TAGS \
- config-stamp config.h conf config.log config.cache
+ config-stamp config.h conf config.log config.cache .gdbinit
realclean: clean distclean
-rm -rf $(DISTSTUFF)
against=stage2
+# This rule is derived from corresponding code in the Makefile.in for gcc.
+# The "tail +16c" is to bypass headers which may include timestamps or
+# temporary assembly file names.
comparison: force
- for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
+ x=0 ; \
+ for file in $(STAGESTUFF) ; do \
+ tail +16c ./$$file > tmp-foo1; \
+ if tail +16c ${against}/$$file > tmp-foo2 2>/dev/null ; then \
+ if cmp tmp-foo1 tmp-foo2 ; then \
+ true ; \
+ else \
+ echo $$file differs ; \
+ x=1 ; \
+ fi ; \
+ else true; fi ; \
+ done ; \
+ exit $$x
+ -rm -f tmp-foo*
de-stage1: force
- (cd stage1 ; rm -f as ; mv -f * ..)
since byte orders and value sizes don't need to be adjusted. */
#undef CROSS_COMPILE
-/* Some IBM compilers can't handle some of the (rather basic) constructs
- used in the 68k support code. */
-#undef IBM_COMPILER_SUX
-
/* Some gas code wants to know these parameters. */
#undef TARGET_ALIAS
#undef TARGET_CPU
#undef TARGET_OS
#undef TARGET_VENDOR
-/* Some operating systems, for example DOS, require the use of "wb" mode when
- opening a binary file for writing. If only "w" is used, the file will not
- be correct. However, some other systems reject such a mode. This indicates
- which ../include/fopen-*.h header file we want to include, so that we can
- get macros that'll do the right thing for this system. */
-#undef WANT_FOPEN_BIN
-
/* Sometimes the system header files don't declare malloc and realloc. */
#undef NEED_DECLARATION_MALLOC
This function is required for alloca.c support on those systems. */
#undef CRAY_STACKSEG_END
+/* Define if you have alloca, as a function or macro. */
+#undef HAVE_ALLOCA
+
/* Define if you have <alloca.h> and it should be used (not on Ultrix). */
#undef HAVE_ALLOCA_H
since byte orders and value sizes don't need to be adjusted. */
#undef CROSS_COMPILE
-/* Some IBM compilers can't handle some of the (rather basic) constructs
- used in the 68k support code. */
-#undef IBM_COMPILER_SUX
-
/* Some gas code wants to know these parameters. */
#undef TARGET_ALIAS
#undef TARGET_CPU
#undef TARGET_OS
#undef TARGET_VENDOR
-/* Some operating systems, for example DOS, require the use of "wb" mode when
- opening a binary file for writing. If only "w" is used, the file will not
- be correct. However, some other systems reject such a mode. This indicates
- which ../include/fopen-*.h header file we want to include, so that we can
- get macros that'll do the right thing for this system. */
-#undef WANT_FOPEN_BIN
-
/* Sometimes the system header files don't declare malloc and realloc. */
#undef NEED_DECLARATION_MALLOC
{ "jsr", 0x68004000, 0, "1,Bc" }, /* macro: lda $pv,L;jsr .. */
{ "ret", 0x68008000, 0, "1,(2),i" },
{ "ret", 0x68008000, 0, "1,(2)" },
-{ "ret", 0x6b5a8000, 0, "" }, /* macro: ret ra,(ra) */
+{ "ret", 0x6bfa8000, 0, "" }, /* macro: ret zero,(ra) */
{ "ret", 0x6be08000, 0, "(2)" }, /* macro: ret zero,(2) */
{ "ret", 0x681a8000, 0, "1" }, /* macro: ret 1,(ra) */
{ "jcr", 0x6800c000, 0, "1,(2)" },
--- /dev/null
+/* config.h for go32 */\r
+\r
+#define I386COFF 1\r
+\r
+/* Define if using alloca.c. */\r
+#undef C_ALLOCA\r
+\r
+/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.\r
+ This function is required for alloca.c support on those systems. */\r
+#undef CRAY_STACKSEG_END\r
+\r
+/* Define if you have <alloca.h> and it should be used (not on Ultrix). */\r
+#undef HAVE_ALLOCA_H\r
+\r
+/* Define as __inline if that's what the C compiler calls it. */\r
+#undef inline\r
+\r
+/* If using the C implementation of alloca, define if you know the\r
+ direction of stack growth for your system; otherwise it will be\r
+ automatically deduced at run-time.\r
+ STACK_DIRECTION > 0 => grows toward higher addresses\r
+ STACK_DIRECTION < 0 => grows toward lower addresses\r
+ STACK_DIRECTION = 0 => direction of growth unknown\r
+ */\r
+#undef STACK_DIRECTION\r
+\r
+/* Should gas use high-level BFD interfaces? */\r
+#undef BFD_ASSEMBLER\r
+\r
+/* If we aren't doing cross-assembling, some operations can be optimized,\r
+ since byte orders and value sizes don't need to be adjusted. */\r
+#undef CROSS_COMPILE\r
+\r
+/* Some gas code wants to know these parameters. */\r
+#define TARGET_ALIAS "i386"\r
+#define TARGET_CPU "i386"\r
+#define TARGET_CANONICAL "i386-i386"\r
+#define TARGET_OS "djgpp"\r
+#define TARGET_VENDOR "djgpp"\r
+\r
+/* Some operating systems, for example DOS, require the use of "wb" mode when\r
+ opening a binary file for writing. If only "w" is used, the file will not\r
+ be correct. However, some other systems reject such a mode. This indicates\r
+ which ../include/fopen-*.h header file we want to include, so that we can\r
+ get macros that'll do the right thing for this system. */\r
+#define WANT_FOPEN_BIN 1\r
+\r
+/* Sometimes the system header files don't declare malloc and realloc. */\r
+#undef NEED_DECLARATION_MALLOC\r
+\r
+/* Sometimes the system header files don't declare free. */\r
+#undef NEED_DECLARATION_FREE\r
+\r
+/* Sometimes errno.h doesn't declare errno itself. */\r
+#undef NEED_DECLARATION_ERRNO\r
+\r
+#define MANY_SEGMENTS 1\r
+\r
+/* Needed only for sparc configuration */\r
+#undef sparcv9\r
+\r
+/* Define if you have the remove function. */\r
+#define HAVE_REMOVE 1\r
+\r
+/* Define if you have the unlink function. */\r
+#define HAVE_UNLINK 1\r
+\r
+/* Define if you have the <errno.h> header file. */\r
+#define HAVE_ERRNO_H 1\r
+\r
+/* Define if you have the <memory.h> header file. */\r
+#define HAVE_MEMORY_H 1\r
+\r
+/* Define if you have the <stdarg.h> header file. */\r
+#define HAVE_STDARG_H 1\r
+\r
+/* Define if you have the <stdlib.h> header file. */\r
+#define HAVE_STDLIB_H 1\r
+\r
+/* Define if you have the <string.h> header file. */\r
+#define HAVE_STRING_H 1\r
+\r
+/* Define if you have the <strings.h> header file. */\r
+#undef HAVE_STRINGS_H\r
+\r
+/* Define if you have the <sys/types.h> header file. */\r
+#define HAVE_SYS_TYPES_H 1\r
+\r
+/* Define if you have the <unistd.h> header file. */\r
+#define HAVE_UNISTD_H 1\r
+\r
+/* Define if you have the <varargs.h> header file. */\r
+#undef HAVE_VARARGS_H\r
since byte orders and value sizes don't need to be adjusted. */
#undef CROSS_COMPILE
-/* Some IBM compilers can't handle some of the (rather basic) constructs
- used in the 68k support code. */
-#undef IBM_COMPILER_SUX
-
/* Some gas code wants to know these parameters. */
#define TARGET_ALIAS "vms"
#define TARGET_CPU "vax"
#define TARGET_OS "vms"
#define TARGET_VENDOR "dec"
-/* Some operating systems, for example DOS, require the use of "wb" mode when
- opening a binary file for writing. If only "w" is used, the file will not
- be correct. However, some other systems reject such a mode. This indicates
- which ../include/fopen-*.h header file we want to include, so that we can
- get macros that'll do the right thing for this system. */
-#undef WANT_FOPEN_BIN
-
/* Sometimes the system header files don't declare malloc and realloc. */
#undef NEED_DECLARATION_MALLOC
#!/bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 1.120
-# Copyright (C) 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+# Generated automatically using autoconf version 2.0
+# Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc.
#
-# This configure script is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as published
-# by the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This script is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
-# Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this script; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-# The redistribution and modification terms for this script do not affect
-# the terms for software that it configures.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+# Defaults:
ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
ac_help="$ac_help
bfd-assembler use BFD back end for writing object files"
--quiet, --silent do not print \`checking...' messages
--version print the version of autoconf that created configure
Directory and file names:
- --exec-prefix=PREFIX install host dependent files in PREFIX [/usr/local]
- --prefix=PREFIX install host independent files in PREFIX [/usr/local]
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=PREFIX install architecture-dependent files in PREFIX
+ [same as prefix]
--srcdir=DIR find the sources in DIR [configure dir or ..]
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
program_suffix=NONE
program_transform_name=s,x,x,
silent=
+site=
srcdir=
target=NONE
verbose=
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site="$ac_optarg" ;;
+
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 1.120"
+ echo "configure generated by autoconf version 2.0"
exit 0 ;;
-with-* | --with-*)
{ echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
fi
fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
- CONFIG_SITE=$prefix/lib/config.site
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
else
- CONFIG_SITE=/usr/local/lib/config.site
- fi
- # System dependent files override system independent ones.
- if test "x$exec_prefix" != xNONE && test "x$exec_prefix" != "x$prefix"; then
- CONFIG_SITE="$CONFIG_SITE $exec_prefix/lib/config.site"
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
fi
for ac_site_file in $CONFIG_SITE; do
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} $CFLAGS $CPPFLAGS conftest.$ac_ext -c 1>&5 2>&5'
ac_link='${CC-cc} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext -o conftest $LIBS 1>&5 2>&5'
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# 2. Host defaults to nonopt.
# 3. If nonopt is not specified, then host defaults to the current host,
# as determined by config.guess.
-# 4. Target defaults to nonopt.
-# 5. If nonopt is not specified, then target defaults to host.
-# 6. build defaults to empty (but implicitly to host).
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
build_alias=$build
case "$build_alias" in
-NONE) build= build_alias= ;;
-*)
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
build=`$ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
-;;
-esac
echo "$ac_t""$build" 1>&4
test "$host_alias" != "$target_alias" &&
mips*) cpu_type=mips endian=big ;;
powerpc*) cpu_type=ppc ;;
rs6000*) cpu_type=ppc ;;
- sparc64) cpu_type=sparc obj_format=elf cat >> confdefs.h <<\EOF
+ sparc64) cpu_type=sparc obj_format=elf
+ cat >> confdefs.h <<\EOF
#define sparcv9 1
EOF
;;
alpha-*-netware*) obj_format=ecoff ;;
alpha-*-osf*) obj_format=ecoff ;;
- arm-*-riscix*) obj_format=aout bfd_gas=yes ;;
+ arm-*-riscix*) obj_format=aout ;;
hppa-*-*elf*) obj_format=elf emulation=hppa ;;
hppa-*-osf*) obj_format=som emulation=hppa ;;
m68k-apollo-*) obj_format=coff gas_target=apollo emulation=apollo ;;
m68k-*-coff | m68k-*-sysv*)
obj_format=coff gas_target=m68kcoff ;;
- m68k-*-hpux) obj_format=hp300 emulation=hp300 ;;
+ m68k-*-hpux*) obj_format=hp300 emulation=hp300 ;;
m68k-*-lynxos*) obj_format=coff gas_target=m68kcoff
emulation=lynx ;;
m88k-*-coff*) obj_format=coff gas_target=m88kcoff ;;
# don't change emulation like *-*-bsd does
- mips-*-bsd*) bfd_gas=yes obj_format=aout gas_target=mips-lit ;;
+ mips-*-bsd*) obj_format=aout gas_target=mips-lit ;;
mips-*-ultrix*) obj_format=ecoff gas_target=mips-lit ;;
mips-*-ecoff*) obj_format=ecoff
case "$endian" in
*) gas_target=mips-lit ;;
esac
;;
- ppc-*-aix*) obj_format=coff bfd_gas=yes ;;
- ppc-*-elf*) obj_format=elf bfd_gas=yes ;;
+ ppc-*-aix*) obj_format=coff ;;
+ ppc-*-elf*) obj_format=elf ;;
ppc-*-netware*) obj_format=elf emulation=ppcnw ;;
- ppc-*-sysv4*) obj_format=elf bfd_gas=yes ;;
+ ppc-*-sysv4*) obj_format=elf ;;
sh-*-coff) obj_format=coff ;;
- ns32k-pc532-mach*) obj_format=aout emulation=pc532 bfd_gas=yes ;;
- ns32k-pc532-netbsd*) obj_format=aout emulation=nbsd532 bfd_gas=yes ;;
+ ns32k-pc532-mach*) obj_format=aout emulation=pc532 ;;
+ ns32k-pc532-netbsd*) obj_format=aout emulation=nbsd532 ;;
sparc*-*-sunos4*) obj_format=aout emulation=sun3 ;;
sparc*-*-aout | sparc*-*-vxworks)
# and target makefile frag
target_frag=${srcdir}/config/${gas_target}.mt
+if test ! -r ${target_frag}; then
+ target_frag=/dev/null # ick! but subst_file can't be conditionalized
+fi
case ${cpu_type}-${obj_format} in
+ arm-*) bfd_gas=yes ;;
# not yet
# i386-aout) bfd_gas=preferred ;;
+ mips-*) bfd_gas=yes ;;
+ ns32k-*) bfd_gas=yes ;;
+ ppc-*) bfd_gas=yes ;;
sparc*-*) bfd_gas=yes ;;
*-elf) bfd_gas=yes ;;
*-ecoff) bfd_gas=yes ;;
EOF
-case ${host} in
- rs6000-*-*)
- # The IBM compiler mis-compiles some expressions used in gas.
- # This will tell gas to work around this lossage.
- cat >> confdefs.h <<\EOF
-#define IBM_COMPILER_SUX 1
-EOF
- ;;
- i386-*-go32)
- # Using fopen(..., "w") for a binary file breaks under DOS.
- cat >> confdefs.h <<\EOF
-#define WANT_FOPEN_BIN 1
-EOF
- ;;
-esac
-
echo $ac_n "checking for CC""... $ac_c" 1>&4
test -z "$CC" && CC=`egrep '^CC *=' ../Makefile | tail -1 | sed 's/^CC *= *//'`
test -z "$CC" && CC=cc
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 917 "configure"
+#line 906 "configure"
#include "confdefs.h"
-#include <stdio.h>
+#include <assert.h>
Syntax Error
EOF
eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 931 "configure"
+#line 920 "configure"
#include "confdefs.h"
-#include <stdio.h>
+#include <assert.h>
Syntax Error
EOF
eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
for ac_hdr in string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h
do
-ac_safe=`echo "$ac_hdr" | tr './' '__'`
+ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&4
if eval "test \"`echo '${'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&4
else
cat > conftest.$ac_ext <<EOF
-#line 962 "configure"
+#line 951 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&4
- ac_tr_hdr=HAVE_`echo $ac_hdr | tr '[a-z]./' '[A-Z]__'`
+ ac_tr_hdr=HAVE_`echo $ac_hdr | tr '[a-z]./\055' '[A-Z]___'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
ac_cv_cross=yes
else
cat > conftest.$ac_ext <<EOF
-#line 1014 "configure"
+#line 1003 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
echo $ac_n "(cached) $ac_c" 1>&4
else
cat > conftest.$ac_ext <<EOF
-#line 1037 "configure"
+#line 1026 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() { return 0; }
echo $ac_n "(cached) $ac_c" 1>&4
else
cat > conftest.$ac_ext <<EOF
-#line 1068 "configure"
+#line 1057 "configure"
#include "confdefs.h"
#ifdef __GNUC__
echo $ac_n "(cached) $ac_c" 1>&4
else
cat > conftest.$ac_ext <<EOF
-#line 1126 "configure"
+#line 1115 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
echo $ac_n "(cached) $ac_c" 1>&4
else
cat > conftest.$ac_ext <<EOF
-#line 1153 "configure"
+#line 1142 "configure"
#include "confdefs.h"
#include <ctype.h> /* Arbitrary system header to define __stub macros. */
int main() { return 0; }
echo $ac_n "(cached) $ac_c" 1>&4
else
cat > conftest.$ac_ext <<EOF
-#line 1194 "configure"
+#line 1183 "configure"
#include "confdefs.h"
#include <ctype.h> /* Arbitrary system header to define __stub macros. */
int main() { return 0; }
echo $ac_n "(cached) $ac_c" 1>&4
else
cat > conftest.$ac_ext <<EOF
-#line 1235 "configure"
+#line 1224 "configure"
#include "confdefs.h"
#include <ctype.h> /* Arbitrary system header to define __stub macros. */
int main() { return 0; }
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 1287 "configure"
+#line 1276 "configure"
#include "confdefs.h"
find_stack_direction ()
{
else
if test "$GCC" = yes; then
cat > conftest.$ac_ext <<EOF
-#line 1328 "configure"
+#line 1317 "configure"
#include "confdefs.h"
int main() { return 0; }
} inline foo() {
; return 0; }
EOF
-if eval $ac_link; then
+if eval $ac_compile; then
rm -rf conftest*
ac_cv_c_inline=yes
else
echo $ac_n "(cached) $ac_c" 1>&4
else
cat > conftest.$ac_ext <<EOF
-#line 1366 "configure"
+#line 1355 "configure"
#include "confdefs.h"
#include <ctype.h> /* Arbitrary system header to define __stub macros. */
int main() { return 0; }
echo $ac_n "(cached) $ac_c" 1>&4
else
cat > conftest.$ac_ext <<EOF
-#line 1415 "configure"
+#line 1404 "configure"
#include "confdefs.h"
#include <assert.h>
#include <stdio.h>
echo $ac_n "(cached) $ac_c" 1>&4
else
cat > conftest.$ac_ext <<EOF
-#line 1472 "configure"
+#line 1461 "configure"
#include "confdefs.h"
$gas_test_headers
int main() { return 0; }
echo $ac_n "(cached) $ac_c" 1>&4
else
cat > conftest.$ac_ext <<EOF
-#line 1508 "configure"
+#line 1497 "configure"
#include "confdefs.h"
$gas_test_headers
int main() { return 0; }
echo $ac_n "(cached) $ac_c" 1>&4
else
cat > conftest.$ac_ext <<EOF
-#line 1547 "configure"
+#line 1536 "configure"
#include "confdefs.h"
#ifdef HAVE_ERRNO_H
trap 'rm -fr conftest* confdefs* core $ac_clean_files; exit 1' 1 2 15
-test "x$prefix" = xNONE && prefix=/usr/local
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 1.120"
+ echo "$CONFIG_STATUS generated by autoconf version 2.0"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
if "%1" == "h8/300" goto h8300\r
\r
echo Configuring gas for go32\r
-update config/ho-go32.h host.h\r
update config/tc-i386.c targ-cpu.c\r
update config/tc-i386.h targ-cpu.h\r
update config/te-go32.h targ-env.h\r
\r
:common\r
\r
-echo # Makefile generated by "configure.bat"> Makefile\r
-echo all.dos : as.new>>Makefile\r
+echo # Makefile generated by "configure.bat"> Makefile.2\r
+echo all.dos : as.new gasp.new>> Makefile.2\r
\r
if exist config.sed del config.sed\r
\r
-echo "s/^ \$(srcdir)\/move-if-change/ update/ ">> config.sed\r
-echo "/\.o[ ]*:/ s/config.status// ">> config.sed\r
-echo "/^target=/ c\ ">> config.sed\r
-echo "target=go32 ">> config.sed\r
-echo "s/CC = cc/CC = gcc/ ">> config.sed\r
-echo "s/:\$/: \$/g ">> config.sed\r
-echo "s/^ \ *\.\// go32 / ">> config.sed\r
-echo "s/`echo \$(srcdir)\///g ">> config.sed\r
-echo "s/ | sed 's,\^\\\.\/,,'`//g ">> config.sed\r
-echo "s/^ cd \$(srcdir)[ ]*;// ">> config.sed\r
-\r
-echo "/^####/ i\ ">> config.sed\r
-echo "TDEFINES=-DMANY_SEGMENTS -DI386COFF \ ">> config.sed\r
-echo "LOCAL_LOADLIBES=../bfd/libbfd.a ">> config.sed\r
+echo "s/@srcdir@/./g ">> config.sed\r
+echo "s/@target_alias@/go32/ ">> config.sed\r
+echo "s/@prefix@// ">> config.sed\r
+echo "s/@CC@/gcc/g ">> config.sed\r
+echo "s/@OPCODES_LIB@/..\/opcodes\/libopcodes.a/g ">> config.sed\r
+echo "s/@BFDLIB@/..\/bfd\/libbfd.a/g ">> config.sed\r
+echo "s/@ALL_OBJ_DEPS@/..\/bfd\/bfd.h/g ">> config.sed\r
\r
echo "/^all[ ]*:/ a\ ">> config.sed\r
echo "dummy: ">> config.sed\r
\r
-echo "s/\/usr[^ ]*errno.h//g ">> config.sed\r
+echo "s/\/usr[^ ]*.h//g ">> config.sed\r
\r
echo "/^config.h[ ]*:/ d ">> config.sed\r
+echo "s/^Makefile/not-Makefile/ ">> config.sed\r
\r
sed -e "s/^\"//" -e "s/\"$//" -e "s/[ ]*$//" config.sed > config2.sed\r
sed -f config2.sed Makefile.in >> Makefile.2\r
del config.sed\r
del config2.sed\r
\r
-echo > config-stamp\r
-echo #define TARGET_CPU "i386">config.h1\r
-echo #define TARGET_ALIAS "i386">>config.h1\r
-echo #define TARGET_CANONICAL "i386">>config.h1\r
-sed -n "/^VERSION=/p" Makefile.in | sed -e "s/VERSION=/#define GAS_VERSION \"/" -e "s/$/\"/">> config.h1\r
-update config.h1 config.h\r
+echo #ifndef GAS_VERSION> config.new\r
+sed -n "/^VERSION=/p" Makefile.in | sed -e "s/VERSION=/#define GAS_VERSION \"/" -e "s/$/\"/">> config.new\r
+type config\go32.cfg >> config.new\r
+echo #endif>> config.new\r
+update config.new config.h\r
mips*) cpu_type=mips endian=big ;;
powerpc*) cpu_type=ppc ;;
rs6000*) cpu_type=ppc ;;
- sparc64) cpu_type=sparc obj_format=elf AC_DEFINE(sparcv9) ;;
+ sparc64) cpu_type=sparc obj_format=elf
+ AC_DEFINE(sparcv9) ;;
sparclite*) cpu_type=sparc ;;
*) cpu_type=${target_cpu} ;;
esac
alpha-*-netware*) obj_format=ecoff ;;
alpha-*-osf*) obj_format=ecoff ;;
- arm-*-riscix*) obj_format=aout bfd_gas=yes ;;
+ arm-*-riscix*) obj_format=aout ;;
hppa-*-*elf*) obj_format=elf emulation=hppa ;;
hppa-*-osf*) obj_format=som emulation=hppa ;;
m68k-apollo-*) obj_format=coff gas_target=apollo emulation=apollo ;;
m68k-*-coff | m68k-*-sysv*)
obj_format=coff gas_target=m68kcoff ;;
- m68k-*-hpux) obj_format=hp300 emulation=hp300 ;;
+ m68k-*-hpux*) obj_format=hp300 emulation=hp300 ;;
m68k-*-lynxos*) obj_format=coff gas_target=m68kcoff
emulation=lynx ;;
m88k-*-coff*) obj_format=coff gas_target=m88kcoff ;;
# don't change emulation like *-*-bsd does
- mips-*-bsd*) bfd_gas=yes obj_format=aout gas_target=mips-lit ;;
+ mips-*-bsd*) obj_format=aout gas_target=mips-lit ;;
mips-*-ultrix*) obj_format=ecoff gas_target=mips-lit ;;
mips-*-ecoff*) obj_format=ecoff
case "$endian" in
*) gas_target=mips-lit ;;
esac
;;
- ppc-*-aix*) obj_format=coff bfd_gas=yes ;;
- ppc-*-elf*) obj_format=elf bfd_gas=yes ;;
+ ppc-*-aix*) obj_format=coff ;;
+ ppc-*-elf*) obj_format=elf ;;
ppc-*-netware*) obj_format=elf emulation=ppcnw ;;
- ppc-*-sysv4*) obj_format=elf bfd_gas=yes ;;
+ ppc-*-sysv4*) obj_format=elf ;;
sh-*-coff) obj_format=coff ;;
- ns32k-pc532-mach*) obj_format=aout emulation=pc532 bfd_gas=yes ;;
- ns32k-pc532-netbsd*) obj_format=aout emulation=netbsd532 bfd_gas=yes ;;
+ ns32k-pc532-mach*) obj_format=aout emulation=pc532 ;;
+ ns32k-pc532-netbsd*) obj_format=aout emulation=nbsd532 ;;
- sparc*-*-sunos4*) obj_format=aout emulation=sun3 bfd_gas=yes ;;
+ sparc*-*-sunos4*) obj_format=aout emulation=sun3 ;;
sparc*-*-aout | sparc*-*-vxworks)
- obj_format=aout bfd_gas=yes ;;
- sparc*-*-coff) obj_format=coff bfd_gas=yes ;;
- sparc*-*-lynxos*) obj_format=coff bfd_gas=yes emulation=lynx ;;
- sparc*-fujitsu-none) obj_format=aout bfd_gas=yes ;;
+ obj_format=aout ;;
+ sparc*-*-coff) obj_format=coff ;;
+ sparc*-*-lynxos*) obj_format=coff emulation=lynx ;;
+ sparc*-fujitsu-none) obj_format=aout ;;
sparc*-*-elf | sparc*-*-solaris*)
obj_format=elf ;;
# and target makefile frag
target_frag=${srcdir}/config/${gas_target}.mt
+if test ! -r ${target_frag}; then
+ target_frag=/dev/null # ick! but subst_file can't be conditionalized
+fi
AC_SUBST_FILE(target_frag)
case ${cpu_type}-${obj_format} in
+ arm-*) bfd_gas=yes ;;
# not yet
# i386-aout) bfd_gas=preferred ;;
+ mips-*) bfd_gas=yes ;;
+ ns32k-*) bfd_gas=yes ;;
+ ppc-*) bfd_gas=yes ;;
+ sparc*-*) bfd_gas=yes ;;
*-elf) bfd_gas=yes ;;
*-ecoff) bfd_gas=yes ;;
*-som) bfd_gas=yes ;;
*-preferred)
bfd_gas=yes
;;
+ yes-*)
+ bfd_gas=yes
+ ;;
-*)
# User specified nothing.
;;
AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}")
AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}")
-case ${host} in
- rs6000-*-*)
- # The IBM compiler mis-compiles some expressions used in gas.
- # This will tell gas to work around this lossage.
- AC_DEFINE(IBM_COMPILER_SUX) ;;
- i386-*-go32)
- # Using fopen(..., "w") for a binary file breaks under DOS.
- AC_DEFINE(WANT_FOPEN_BIN) ;;
-esac
-
AC_PROG_CC
AC_PROG_INSTALL
# people who are not cross-compiling but are compiling cross-assemblers.
AC_MSG_CHECKING(whether compiling a cross-assembler)
if test "${host}" = "${target}"; then
+ cross_gas=no
+else
cross_gas=yes
AC_DEFINE(CROSS_COMPILE)
-else
- cross_gas=no
fi
AC_MSG_RESULT($cross_gas)
AC_FUNC_ALLOCA
AC_C_INLINE
-# VMS needs this.
-AC_CHECK_FUNCS(unlink delete, break)
+# VMS doesn't have unlink.
+AC_CHECK_FUNCS(unlink remove, break)
# Some non-ANSI preprocessors botch requoting inside strings. That's bad
# enough, but on some of those systems, the assert macro relies on requoting
AC_CONFIG_SUBDIRS(testsuite)
dnl This must come last.
-dnl Apparently symlinks are checked for in the directory containing
-dnl the last Makefile. Thus the order used here...
AC_OUTPUT(Makefile doc/Makefile .gdbinit:gdbinit.in)
strcpy (path, include_dirs[i]);
strcat (path, "/");
strcat (path, filename);
- if (0 != (try = fopen (path, FOPEN_RT)))
+ if (0 != (try = fopen (path, "r")))
{
fclose (try);
goto gotit;
projects / binutils-gdb.git / commitdiff